Search Results

Search found 22040 results on 882 pages for 'process improvement'.

Page 305/882 | < Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >

• Benchmarking a file server

  - by Joel Coel

  I'm working on building a new file server... a simple Windows Server box with a few terabytes of disk space to share on the LAN. Pain for current hard drive prices aside :( -- I would like to get some benchmarks for this device under load compared to our old server. The old server was installed in 2005 and had 5 136GB 10K disks in RAID 5. The new server has 8 1TB disks in two RAID 10 volumes (plus a hot spare for each volume), but they're only 7.2K rpm, and of course with a much larger cache size. I'd like to get an idea of the performance expectations of the new server relative to the old. Where do I get started? I'd like to know both raw potential under different kinds of load for each server, as well an idea of what our real-world load looks like and how it will translate. Will disk load even matter, or will performance be more driven by the network connection? I could probably fumble through some disk i/o and wait counters in performance monitor, but I don't really know what to look for, which counters to watch, or for how long and when. FWIW, I'm expecting a nice improvement because of the benefits of having two different volumes and the better RAID 10 performance vs RAID 5, in spite of using slower disks... but I'd like to get an idea of how much.

  Read the article

• Insert some data at later point once serialization(binary serialization) is done for a class

  - by coolcake

  My application is written in C# and I am a newbie to C#. I am facing with a problem during serialization. The problem is as follows. There are many classes in my project and when serialization is called on one of the main class object it serializes itself and during this process many of the member objects are also get serialized. This whole serialization is done in to a file with extension say ".bin". This bin file size should be of size max 20MB. In this process of serialization one of my other class also gets serialized to a stream, this class is having a big array. The size of this array or list can be of 80 MB or more. So during serialization i have serialize all the objects other than this array and depending upon the size left in the 20MB I need to add in between the serialization the number of array elements which can fit in the remaining memory. For the other array elements left out I have to create a similar kind of .bin file with all the objects serialized and in between need to insert the number of array elements that can fit there. The main problem here is the array elements get inserted at runtime and this list keeps on increasing. So i should be creating .bin files continuously until my application runs. Any ideas how can i implement a solution for this problem? Thanks in Advance.

  Read the article

• We have multiple app servers running against a single database. How do I ensure that each row in a q

  - by Dave

  We have about 7 app servers running .NET windows services that ping a single sql server 2005 queue table and fetch a fixed amount of records to process at fixed intervals. The amount of records to process and the amount of time between fetches are both configurable and are initially set to 100 and 30 seconds initially. Currently, my queue table has an int status column which can be either "Ready, Processing, Complete, Error". The proc that fetches the records has a sql transaction with the following code inside the transaction: 1) Fetch x number of records into temp table where the status is "Ready". The select uses a holdlock hint 2) Update the status on those records in the Queue table to "Processing" The .NET services do some processing that may take seconds or even minutes per record. Another proc is called per record that simply updates the status to "Complete". The update proc has no transaction as I'm leaning on the implicit transaction as part of the update clause here. I don't know the traffic exceptions for this but figure it will be under 10k records per day. Is this the best way to handle this scenario? If so, are there any details that I've left out, such as a hint here or there? Thanks! Dave

  Read the article

• Setting up SQL Server 2005 to use all available memory in 32bit Windows Server 2003 - and verifying

  - by Rizwan Kassim

  There are a number of questions along this line - but they either sometimes contradict each other, or don't show how to properly verify that everything is actually working - hopefully this can be comprehensive... I'm running SQL Server 2005 SP3 Standard on Windows Server 2003 R2 Standard. My server has 8GB of memory installed - my system is almost entirely used as a Database Server - there are some services running on them, but the OS + services can run within 1Gb of RAM. What I've done (please tell me if I'm doing something wrong): /3GB in the boot.ini. (To increase the amount of user-space memory available - info) /PAE in the boot.ini. (Windows claimed to be doing PAE even without this switch, somethow.) Enabled AWE in SQL Server. Enabled Lock Pages in Memory Option for users SYSTEM and Local Service. (info). SQL Server Standard doesn't seem to use this until Cumulative Update 4, which isn't installed on my server. (info) Set Min/Max Memory to : 1024Mb/5112Mb After doing all the above, we definately saw a level of improvement - but I'd like now to verify my settings, make sure that I'm making full use of the memory available. (There appeared to be a slowdown when max = 7Gb, so I edged off from that value, but it might have been just perceptual.) To verify, I checked the following levels in PerfMon : Process(sqlserv):Working Set : 76386304 SQL Server(Memory Manager) : Total Server Memory : 3538944 (I saw a doc that noted that this wasn't the full memory used by SQL Server, so I'm not sure whether to trust it) So -- my questions... Should my max be around 7Gb? If not, what should it be? Why is total server memory at 3.5G, when it's been allocated 5G? What is the proper metric for the amount of memory allocated to SQL Server? The Working Set seems a bit large... Am I possibly missing any steps in the setup? Any recommended resources on starting to tune the caching system now? Thanks

  Read the article

• createSQLXML() AbstractMethodError (with DB2XADataSource?)

  - by Mike

  Environment: WASCE 2.0.0.4 (aka geronimo 2.1) db2jcc4.jar 4.3.85 (tried 4.8.x as well) tranql-connector-db2-xa 1.4 (tried 1.5 as well) SQLXML xml = c.createSQLXML(); Struggling with java.lang.AbstractMethodError: java/sql/ResultSet.getSQLXML(I)Ljava/sql/SQLXML; at [snip] at javax.servlet.http.HttpServlet.service(HttpServlet.java:693) at javax.servlet.http.HttpServlet.service(HttpServlet.java:806) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191) at org.apache.geronimo.tomcat.valve.DefaultSubjectValve.invoke(DefaultSubjectValve.java:56) at org.apache.geronimo.tomcat.GeronimoStandardContext$SystemMethodValve.invoke(GeronimoStandardContext.java:406) at org.apache.geronimo.tomcat.valve.GeronimoBeforeAfterValve.invoke(GeronimoBeforeAfterValve.java:47) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:555) at org.apache.geronimo.tomcat.valve.ThreadCleanerValve.invoke(ThreadCleanerValve.java:40) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:852) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:588) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489) at java.lang.Thread.run(Thread.java:736) It happens the connection handle is acquired via JNDI only. Works fine with the connection handle is acquired the traditional way. I made sure it is not a jar/version/classloading issue. got hints?

  Read the article

• Using db4o with multiple application instances under medium trust

  - by Anders Fjeldstad

  I recently stumbled over the object database engine db4o which I think looks really interesting. I would like to use it in an ASP.NET MVC application that will be deployed to a shared hosting environment under medium trust. Because of the trust level, I'm restricted to using db4o in embedded/in-process mode. That in itself should be no problem, but the hosting provider also transparently runs each web application in multiple (load-balanced) server instances with shared storage, which I would say is normally a very nice feature for a $10/month hoster. However, since an instance of a db4o server with write access (whether in-process or networked) locks the underlying database file, having multiple instances of the application using the same file won't work (or at least I can't see how it would). So the question is: is it possible to use db4o in this specific environment? I have considered letting each application have its own database which is synchronized with a master database using replication (dRS), but that approach will most likely end up with very frequent bi-directional replication (read master changes at beginning of each request, write to master after each change) which I don't think will be very efficient. Summary of the web application/environment characteristics: Read-intensive (but not entirely read-only) Some delay (a few seconds) is acceptible between the time that a change is made and the time when the change shows up in all the application instances' data Must run in medium trust No guarantee that the load-balancer uses "sticky sessions" All suggestions are much appreciated!

  Read the article

• Flex vs. jQuery vs. GWTvs./ Closre vs. Cappuccino vs. plain JS and HTML5?

  - by Laith J

  Hello, I'm creating my first web application and I'm really confused as to what technology to go for. My application needs to look serious (like an application), it doesn't need many colorful graphical interfaces. It only needs a toolbar, a tab bar, a split panel (preferably 3 columns), an easily-formatable text field, and a status bar. It will connect to a MySQL database through PHP (unless I go for GWT). Users will upload files. My evaluation of the options: Flex: Probably the easiest to develop but I'm pretty sure my application is something one would use on an iPad and with Flash's future on the iPad still unsure, I don't want to take the risk, otherwise Flex would've been my choice. jQuery: I've heard a lot about it and a lot of people recommend but I don't know how easy it is to use and how customizable the look of my app is. GWT: The problem with GWT is that it doesn't have many widgets. Another problem is that I'm gonna have to host the files in AppEngine's datastore and transfer them back and forth to a web server that will do operations on them (I need to process them) which adds more traffic and slows the process which worsens the user experience. Closure: It has a nice toolbar and a nice text field. I'm not sure how easy it is to use. Plus, I read an article that makes it sound really bad. Cappuccino: It has a very nice UI and it has a mac feel. I'm planning to give my application a mac feel anyway so this will save me a lot of theming. But if I go for this option I won't be able to make use of HTML5's new features (especially working offline). Plain JS and HTML5: This gives me the most flexibility but it is the hardest to work for. I'm sorry if this is subjective but I really need help with this.

  Read the article

• code review: Is it subjective or objective(quantifiable) ?

  - by Ram

  I am putting together some guidelines for code reviews. We do not have one formal process yet, and trying to formalize it. And our team is geographically distributed We are using TFS for source control (used it for tasks/bug tracking/project management as well, but migrated that to JIRA) with VS2008 for development. What are the things you look for when doing a code review ? These are the things I came up with Enforce FXCop rules (we are a Microsoft shop) Check for performance (any tools ?) and security (thinking about using OWASP- code crawler) and thread safety Adhere to naming conventions The code should cover edge cases and boundaries conditions Should handle exceptions correctly (do not swallow exceptions) Check if the functionality is duplicated elsewhere method body should be small(20-30 lines) , and methods should do one thing and one thing only (no side effects/ avoid temporal coupling -) Do not pass/return nulls in methods Avoid dead code Document public and protected methods/properties/variables What other things do you generally look for ? I am trying to see if we can quantify the review process (it would produce identical output when reviewed by different persons) Example: Saying "the method body should be no longer than 20-30 lines of code" as opposed to saying "the method body should be small" Or is code review very subjective ( and would differ from one reviewer to another ) ? The objective is to have a marking system (say -1 point for each FXCop rule violation,-2 points for not following naming conventions,2 point for refactoring etc) so that developers would be more careful when they check in their code.This way, we can identify developers who are consistently writing good/bad code.The goal is to have the reviewer spend about 30 minutes max, to do a review (I know this is subjective, considering the fact that the changeset/revision might include multiple files/huge changes to the existing architecture etc , but you get the general idea, the reviewer should not spend days reviewing someone's code) What other objective/quantifiable system do you follow to identify good/bad code written by developers? Book reference: Clean Code: A handbook of agile software craftmanship by Robert Martin

  Read the article

• PHP extensions won't load on Apache startup

  - by WebDevHobo

  I've added php as a module for Apache 2.2.11: LoadModule php5_module "c:/php/php5apache2_2.dll" And also added AddType application/x-httpd-php .php And in PHP.ini, my extension dir is set to: extension_dir = "C:\php\ext" And yes, the directories are correct and all files do exist. But when I start apache, I get these errors: PHP Warning: PHP Startup: Unable to load dynamic library 'C:\php\ext\php_mysql.dll' - The specified module could not be found.\r\n in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library 'C:\php\ext\php_pdo_pgsql.dll' - The specified module could not be found.\r\n in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library 'C:\php\ext\php_pgsql.dll' - The specified module could not be found.\r\n in Unknown on line 0 [Sun May 17 03:46:01 2009] [notice] Apache/2.2.11 (Win32) PHP/5.2.9-2 configured -- resuming normal operations [Sun May 17 03:46:01 2009] [notice] Server built: Dec 10 2008 00:10:06 [Sun May 17 03:46:01 2009] [notice] Parent: Created child process 4652 PHP Warning: PHP Startup: Unable to load dynamic library 'C:\php\ext\php_mysql.dll' - The specified module could not be found.\r\n in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library 'C:\php\ext\php_pdo_pgsql.dll' - The specified module could not be found.\r\n in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library 'C:\php\ext\php_pgsql.dll' - The specified module could not be found.\r\n in Unknown on line 0 [Sun May 17 03:46:01 2009] [notice] Child 4652: Child process is running [Sun May 17 03:46:01 2009] [notice] Child 4652: Acquired the start mutex. [Sun May 17 03:46:01 2009] [notice] Child 4652: Starting 64 worker threads. [Sun May 17 03:46:01 2009] [notice] Child 4652: Starting thread to listen on port 80. So I'm probably forgetting something simple here, can someone tell me what I'm forgetting?

  Read the article

• Python - multithreading / multiprocessing, very strange problem.

  - by orokusaki

  import uuid import time import multiprocessing def sleep_then_write(content): time.sleep(5) print(content) if __name__ == '__main__': for i in range(15): p = multiprocessing.Process(target=sleep_then_write, args=('Hello World',)) p.start() print('Ah, what a hard day of threading...') This script output the following: Ah, what a hard day of threading... Ah, what a hard day of threading... Ah, what a hard day of threading... Ah, what a hard day of threading... Ah, what a hard day of threading... Ah, what a hard day of threading... Ah, what a hard day of threading... Ah, what a hard day of threading... Ah, what a hard day of threading... AAh, what a hard day of threading.. h, what a hard day of threading... Ah, what a hard day of threading... Ah, what a hard day of threading... Ah, what a hard day of threading... Ah, what a hard day of threading... Ah, what a hard day of threading... Hello World Hello World Hello World Hello World Hello World Hello World Hello World Hello World Hello World Hello World Hello World Hello World Hello World Hello World Hello World Firstly, why the heck did it print the bottom statement sixteen times (one for each process) instead of just the one time? Second, notice the AAh, and h, about half way down; that was the real output. This makes me wary of using threads ever, now. (Windows XP, Python 2.6.4, Core 2 Duo)

  Read the article

• VS2008 javascript debugger IE8 "there is no source code available for the current location"

  - by Jeff Keslinke

  I have almost the same problem as this unanswered question. The only difference is I'm using VS2008, but I'm in an MVC project calling this javascript function: function CompanyChange(compCtrl) { alert(compCtrl.value); debugger; var test; for (var i = 0; i < document.all.length; i++) { test = document.all[i]; } } I hit the alert, then I get the message "there is no source code available for the current location." At which point the page becomes unresponsive and I have to manually stop the debugger just to shut it down. I've logged into another machine and ran this exact code and it works fine, I hit the debugger and can step through. I've checked to make sure all settings in VSToolsOptionsDebugging are identical as well as IEOptionsAdvanced and they are. Both machines are Windows 7 Enterprise edition 32-bit, VS2008, IE8. I've also tried attaching a process manually in VS, and using the 'Developer Tools' in IE which didn't work (said there already was a process attached). I was hoping someone may have had this problem and found a work-around because I've already done a lot of searching and tried all the options I've read. Anyone else run into this? Thank you, Jeff

  Read the article

• java.lang.NoClassDefFoundError: javax/servlet/http/HttpServletRequest

  - by pAkY88

  I'm developing a servlet that receives a multipart request with content of multiple files, and I'm using apache commons file upload libraries. When I call parseRequest(request); method servlet throws following exception: GRAVE: Servlet.service() for servlet DiffOntology threw exception java.lang.NoClassDefFoundError: javax/servlet/http/HttpServletRequest at org.apache.commons.fileupload.servlet.ServletRequestContext.getContentType(ServletRequestContext.java:73) at org.apache.commons.fileupload.FileUploadBase$FileItemIteratorImpl.(FileUploadBase.java:882) at org.apache.commons.fileupload.FileUploadBase.getItemIterator(FileUploadBase.java:331) at org.apache.commons.fileupload.FileUploadBase.parseRequest(FileUploadBase.java:349) at org.apache.commons.fileupload.servlet.ServletFileUpload.parseRequest(ServletFileUpload.java:126) at DiffOntology.doPost(DiffOntology.java:38) at javax.servlet.http.HttpServlet.service(HttpServlet.java:637) at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.tuckey.web.filters.urlrewrite.UrlRewriteFilter.doFilter(UrlRewriteFilter.java:738) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:852) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:588) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489) at java.lang.Thread.run(Thread.java:619) I put all libraries in WEB-INF/lib.

  Read the article

• Cannot use READPAST in snapshot isolation mode

  - by Marcus

  I have a process which is called from multiple threads which does the following: Start transaction Select unit of work from work table with by finding the next row where IsProcessed=0 with hints (UPDLOCK, HOLDLOCK, READPAST) Process the unit of work (C# and SQL stored procedures) Commit the transaction The idea of this is that a thread dips into the pool for the "next" piece of work, and processes it, and the locks are there to ensure that a single piece of work is not processed twice. (the order doesn't matter). All this has been working fine for months. Until today that is, when I happened to realise that despite enabling snapshot isolation and making it the default at the database level, the actual transaction creation code was manually setting an isolation level of "ReadCommitted". I duly changed that to "Snapshot", and of course immediately received the "You can only specify the READPAST lock in the READ COMMITTED or REPEATABLE READ" error message. Oops! The main reason for locking the row was to "mark the row" in such a way that the "mark" would be removed when the transaction that applied the mark was committed and the lock seemed to be the best way to do this, since this table isn't read otherwise except by these threads. If I were to use the IsProcessed flag as the lock, then presumably I would need to do the update first, and then select the row I just updated, but I would need to employ the NOLOCK flag to know whether any other thread had set the flag on a row. All sounds a bit messy. The easiest option would be to abandon the snapshot isolation mode altogether, but the design of step #3 requires it. Any bright ideas on the best way to resolve this problem? Thanks Marcus

  Read the article

• PGP Encrypt from C# using GnuPG

  - by Kishore

  Hello All, I'm trying to encrypt a incoming document in C#, and I'm using GnuPG with input redirection. I need to use -se(sign and encrypt) in a single step, which requires entering passphrase. But for some reason, input redirection is not working. Appreciate your help. Control is going to else block. I'm not sure if there is deadlock or child process(gpg.exe) waiting for the input. pgpproc = new Process(); pgpproc.StartInfo.FileName = exeFilePath; pgpproc.StartInfo.RedirectStandardOutput = false; pgpproc.StartInfo.RedirectStandardInput = true; pgpproc.StartInfo.UseShellExecute = false; pgpproc.StartInfo.Arguments = "-a -o C:\PGPStaging\output.pgp -se -r recipientID C:\PGPStaging\input.txt"; pgpproc.StartInfo.CreateNoWindow = true; pgpproc.Start(); StreamWriter myStreamWriter = pgpproc.StandardInput; myStreamWriter.Write("*****"); myStreamWriter.Close(); if (pgpproc.WaitForExit(waittime)) { //success } else { //failure pgpproc.Kill(); pgpproc.WaitForExit(); } `

  Read the article

• EXC_BREAKPOINT when starting iPhone app

  - by pgb

  A user of our app sent me the following crash log: Incident Identifier: 59D4D5E7-570A-4047-A679-3016B2A226C4 CrashReporter Key: d8284d671ee22ad17511360ce73409ebfa8b84bb Process: .... [63] Path: /var/mobile/Applications/.... Identifier: ... Version: ??? (???) Code Type: ARM (Native) Parent Process: launchd [1] Date/Time: 2010-03-08 17:00:15.437 -0800 OS Version: iPhone OS 2.2.1 (5H11a) Report Version: 103 Exception Type: EXC_BREAKPOINT (SIGTRAP) Exception Codes: 0x00000001, 0xe7ffdefe Crashed Thread: 0 Thread 0 Crashed: 0 dyld 0x2fe01060 dyld_fatal_error + 0 1 dyld 0x2fe088d4 dyld::_main(mach_header const*, unsigned long, int, char const**, char const**, char const**) + 3064 2 dyld 0x2fe0196c dyldbootstrap::start(mach_header const*, int, char const**, long) + 884 3 dyld 0x2fe01048 _dyld_start + 32 Thread 0 crashed with ARM Thread State: r0: 0x2fe23ca0 r1: 0x00000000 r2: 0x2fe23ca0 r3: 0x00000000 r4: 0x2ffff4e0 r5: 0x2ffff4bc r6: 0x2fe005c0 r7: 0x2ffffb00 r8: 0x00000004 r9: 0x2fe57cf0 r10: 0x2fe236c8 r11: 0x00000009 ip: 0x0000018d sp: 0x2ffff5b8 lr: 0x2fe088dc pc: 0x2fe01060 cpsr: 0x00000010 Binary Images: 0x2fe00000 - 0x2fe22fff dyld ??? (???) <f6a50d5f57a676b54276d0ecef46d5f0> /usr/lib/dyld My app uses OpenFeint and PinchMedia analytics. For PinchMedia, I'm linking using their provided .a file, and for OpenFeint, I'm compiling their code (as per their guidelines). The frameworks / libs I'm linking are: UIKit.framework (Weak) MapKit.framework (Weak) Foundation.framework CoreGraphics.framework OpenAL.framework AudioToolbox.framework libsqlite3 SystemConfiguration.framework CoreLocation.framework PinchMedia analytics Security.framework QuartzCore.framework CFNetwork.framework My base SDK is iPhone 3.0, and my Base OS Deployment Target is 2.2.1. There are two things I find weird: The app crashes even before the main method is invoked. The crash log looks exactly like the one posted here: http://stackoverflow.com/questions/2368689/objective-c-iphone-app-exc-breakpoint-sigtrap The user that sent me this crash is using a 2nd gen iPod Touch with OS 2.2.1. I wasn't able to reproduce the issue, but based on the comments in iTunes, it seems that more people is having the same issue.

  Read the article

• Restarting explorer from a batch file only opens an explorer window

  - by Ben Hooper

  In one part of a batch file (kind of), I need to restart Explorer. I use the following method to accomplish this: taskkill /f /im explorer.exe >nul explorer.exe :: I have also tried: %winDir%\explorer.exe :: start %winDir%\explorer.exe :: start /b %winDir%\explorer.exe :: start /d %winDir%\explorer.exe (as suggested by panda-34) :: :: I've even tried delaying the above commands with: ping localhost -n 11 >nul Then this happens: explorer.exe is successfully terminated (denoted by the lack of taskbar and desktop) An explorer window opens, which I am left with indefinitely (see Image 1) I can only then restart explorer by manually starting a new process from Task Manager (Win + R doesn't respond), even though explorer.exe is actually already in the process list, strangely enough.. (see Image 2)   Now, I say "kind of" as I'm running the batch file from a self-executing SFX archive, created with WinRAR. When executed, the contents of the archive are extracted to %temp% and a user-defined bootstrapper (in this case, my batch file) is run upon successful extraction. The strangest thing about it, though, is that if you manually extract the contents of the archive and run the batch file then explorer restarts correctly. It only ever glitches when called from an SFX. I'm experiencing this glitch on Windows 7 x64.   Link to an SFX archive demonstrating this, if anyone wants it: https://dl.dropbox.com/u/27573003/Social%20Distribution/restart-explorer.exe Image 1: Image 2:

  Read the article

• Invoking brill tagger through C#

  - by Toshal Mokadam

  We want to use brill tagger such that on a button click, it will tag the Input.txt into output.txt. So we have created a new visual studio project and put a button. On button click event we wrote the following code. There are no errors and we can see the command prompt getting invoked. But the output file is not getting created. The code is as follows. could you pls guide us?? private void button1_Click(object sender, EventArgs e) { ProcessStartInfo brillStartInfo = new ProcessStartInfo(@"C:\Users\toshal\Documents\Visual Studio 2008\Projects\brill tagger\bin\brill.exe"); brillStartInfo.Arguments = "/C brill.exe LEXICON.BROWN Input.txt BIGRAMS LEXICALRULEFILE.BROWN CONTEXTUALRULEFILE.BROWN > output.txt"; brillStartInfo.UseShellExecute = false; brillStartInfo.RedirectStandardOutput = true; brillStartInfo.RedirectStandardError = true; brillStartInfo.CreateNoWindow = false; Process brill = new Process(); brill.StartInfo = brillStartInfo; brill.Start(); string output = brill.StandardOutput.ReadToEnd(); brill.WaitForExit(); }

  Read the article

• MSMQ first Message.Body in queue is OK, all following Message.Body in queue are empty

  - by Andrew A

  I send a handful of identical (except for Id#, obviously) messages to an MSMQ queue on my local machine. The body of the messages is a serialized XElement object. When I try to process the first message in the queue, I am able to successfully de-serialize the Message.Body object and save it to file. However, when trying to process the next (or any subsequent) message, the Message.Body is absent, and an exception is thrown. I have verified the Message ID's are correct for the message attempting to be processed. The XML being serialized is properly formed. Any ideas? I am basing my code on the Microsoft MSMQ Book order sample found here: http://msdn.microsoft.com/en-us/library/ms180970%28VS.80%29.aspx // Create Envelope XML object XElement envelope = new XElement(env + "Envelope", new XAttribute(XNamespace.Xmlns + "env", env.NamespaceName) <snip> //Send envelope as message body MessageQueue myQueue = new MessageQueue(String.Format(@"FORMATNAME:DIRECT=OS:localhost\private$\mqsample")); myQueue.DefaultPropertiesToSend.Recoverable = true; // Prepare message Message myMessage = new Message(); myMessage.ResponseQueue = new MessageQueue(String.Format(System.Globalization.CultureInfo.InvariantCulture, @"FORMATNAME:DIRECT=TCP:192.168.1.217\private$\mqdemoAck")); myMessage.Body = envelope; // Send the message into the queue. myQueue.Send(myMessage,"message label"); //Retrieve messages from queue LabelIdMapping labelID = (LabelIdMapping)mqlistBox3.SelectedItem; System.Messaging.Message message = mqOrderQueue.ReceiveById(labelID.Id); The Message.Body value I see on the 1st retrieve is as expected: <?xml version="1.0" encoding="utf-8"?> <string>Some String</string> However, the 2nd and subsequent retrieve operations Message.Body is: "Cannot deserialize the message passed as an argument. Cannot recognize the serialization format." How does this work fine the first time but not after that? I have tried message.Dispose() after retrieving it but it did not help. Thank you very much for any help on this!

  Read the article

• Custom Installer class , rollback method never called.

  - by yossi1981

  Hi guys. I am having an installer class , Here is a snippet: [RunInstaller(true)] public partial class ServerWrapInstaller : Installer { public override void Install(IDictionary stateSaver) { EventLog.WriteEntry("Installer", "Install", EventLogEntryType.Information); base.Install(stateSaver); } public override void Commit(IDictionary savedState) { EventLog.WriteEntry("Installer", "Commit", EventLogEntryType.Information); base.Commit(savedState); } public override void Rollback(IDictionary savedState) { EventLog.WriteEntry("Installer", "Rollback", EventLogEntryType.Information); base.Rollback(savedState); } public override void Uninstall(IDictionary savedState) { EventLog.WriteEntry("Installer", "UnInstall", EventLogEntryType.Information); base.Uninstall(savedState); } } Now i start the installation in full GUI mode and then click the "Cancel" button in the middle of the process causing the installation to roll back. The problem is that the RollBack method is not called. I don't see the expected entry in the event log. I want to mention that if i let the installation to complete , I do see the "Install" message in the event log and If i then uninstall , I see the "uninstall" message in the event log. But if stop the installtion process in the middle , by pressing the "cancel" button , I do see the progress bar going backward , but the rollback method is not called. what am I doing wrong ? thanks in advance for any help. Edit: Providing more details... The installer is an MSI package. The package is built in vs2009 using a setup project. The installer class is used as a custom action by the setup project. Since this is a MSI Package I have an option to run it in silent mode or in user-interactive more . When I wrote "Full GUI mode" , I ment User-Interactive mode.

  Read the article

• Salesforce/PHP - outbound messages (SOAP) - memory limit issue

  - by Phill Pafford

  I'm using Salesforce to send outbound messages (via SOAP) to another server. The server can process about 8 messages at a time, but will not send back the ACK file if the SOAP request contains more than 8 messages. SF can send up to 100 outbound messages in 1 SOAP request and I think this is causing a memory issue with PHP. If I process the outbound messages 1 by 1 they all go through fine, I can even do 8 at a time with no issues. But larger sets are not working. ERROR in SF: org.xml.sax.SAXParseException: Premature end of file Looking in the HTTP error logs I see that the incoming SOAP message looks to be getting cut of which throws a PHP warning stating: Premature end of data in tag ... PHP Fatal error: Call to a member function getAttribute() on a non-object This leads me to believe that PHP is having a memory issue and can not parse the incoming message due to it's size. I was thinking I could just set: ini_set('memory_limit', '64M'); But would this be the correct approach? Is there a way I could set this to increase with the incoming SOAP request dynamically? UPDATE: Adding some code $data = fopen('php://input','rb'); $headers = getallheaders(); $content_length = $headers['Content-Length']; $buffer_length = 1000; $fread_length = $content_length + $buffer_length; $content = fread($data,$fread_length); /** * Parse values from soap string into DOM XML */ $dom = new DOMDocument(); $dom->loadXML($content); ....

  Read the article

• Handling Digital ID/Signature in Outlook Add-in

  - by CoSteve

  I have a C# Outlook Add-In application (VS2005 and 2003 Outlook) that reads incoming emails and strips out the attachments and the email text body for future processing. Occasionally I'll get an email that contains a digital signature. The application will fail when I try to access the mailitem.body property, throwing the following exception: System.Runtime.InteropServices.COMException (0xAB404001): The operation failed. at Microsoft.Office.Interop.Outlook._MailItem.get_Body() at MyLib.MyApp.OutlookAddin.MailProcessor.ProcessMailItem(MailItem mailItem) I'm pretty sure it is the digital signature causing the problem because if I forward the email back to myself, it will strip off the original sender's digital signature and the add-in application will process the email without any problems. I'm not sure what to do. I need to process the email, so I can't just ignore it. Somehow getting the body of the original email without throwing an exception would be ideal. Or I guess if I can identify that there is a digital signature associated with the email, I could forward the email to myself, but that seems a little messy. Does anyone have any suggestions/fixes? Thanks for any help.

  Read the article

• Rails: show some examples of code from controllers, models and views

  - by Totty

  Hy, my controller example: class FriendsController < ApplicationController before_filter :authorize, :except => [:friends] ############## ############## ## REQUESTS ## ############## ############## ################## # GET MY FRIENDS # ################## # Get my friends. def friends @friends = @my_profile.friends.paginate({:page => params[:page], :per_page => 3}) @profile = @my_profile end ################### # REMOVED FRIENDS # ################### # Get my deleted friends. def removed_friends @removed_friends = @my_profile.friends('removed_friends', params[:page]) end ################### # PENDING FRIENDS # ################### # Friend requests made by other profiles to me. def pending_friends @pending_friends = @my_profile.friends('pending_friends', params[:page]) end ############################ # REJECTED PENDING FRIENDS # ############################ # Rejected friend requests made by other profiles to me. def rejected_pending_friends @rejected_pending_friends = @my_profile.friends('rejected_pending_friends', params[:page]) end ##################### # REQUESTED FRIENDS # ##################### # The friend requests I've sent to others profiles. def requested_friends @requested_friends = @my_profile.friends('requested_friends', params[:page]) end ############################# # DELETED REQUESTED FRIENDS # ############################# # The requests I've sent to others # profiles and then canceled. def deleted_requested_friends @deleted_requested_friends = @my_profile.friends('deleted_requested_friends', params[:page]) end ############# ############# ## ACTIONS ## ############# ############# ########################## # ADD FRIENDSHIP REQUEST # ########################## # Add a friendship request. def add_friendship_request friendship = @my_profile.add_friendship_request(params[:profile_id]) render :json => friendship end ############################# # REMOVE FRIENDSHIP REQUEST # ############################# # Removes a friendship request I've done. def remove_friendship_request friendship = @my_profile.remove_friendship_request(params[:profile_id]) render :json => friendship end ###################### # PROCESS FRIENDSHIP # ###################### # Process friendship: accept or reject a friend. # This will make a new friend or # will make a new rejected pending friend. def process_friendship friendship = @my_profile.process_friendship(params[:profile_id].to_i, params[:accepted].to_i) render :json => friendship end ################### # REMOVE A FRIEND # ################### # Remove a friend from my friends by id. def remove_friend friendship = @my_profile.remove_friend(params[:profile_id]) render :json => friendship end end

  Read the article

• jQuery .load() XHTML issue

  - by Urfe

  I am having some strange problems loading content from another XHTML page via jQuery. When the second page I try to load from is served as XHTML I get the below error. I don't know if it helps but both documents validate when I get the error. Uncaught Error: NO_MODIFICATION_ALLOWED_ERR: DOM Exception 7 Currently the header on the second page I load from is: <?xml version="1.0" encoding="iso-8859-1" ?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en"> <head> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /> <meta name="language" content="en" /> <title>some title</title> <!-- CSS & Javascript included here --> </head> The content type is set as: application/xhtml+xml;charset=iso-8859-1 Interestingly, when I remove all the XHTML stuff from the header and stop setting the content type the error does not occur and everything works great. The load process currently looks like the below. It works fine when everything is plain HTML. $('#overpage').find(".wrap").load(this.getTrigger().attr("href")+" #op").show(); I'm curious why the process only does not work when the second page I load from is XHTML. I don't want to serve the page as just plain HTML and am looking for advice on what I am doing wrong. Both pages validate and I'm really scratching my head here. Many thanks!

  Read the article

• SerializationException Occurring Only in Release Mode

  - by Calvin Nguyen

  Hi, I am working on an ASP.NET web app using Visual Studio 2008 and a third-party library. Things are fine in my development environment. Things are also good if the web app is deployed in Debug configuration. However, when it is deployed in Release mode, SerializationExceptions appear intermittently, breaking other functionality. In the Windows event log, the following error can be seen: "An unhandled exception occurred and the process was terminated. Application ID: DefaultDomain Process ID: 3972 Exception: System.Runtime.Serialization.SerializationException Message: Unable to find assembly 'MyThirdPartyLibrary, Version=1.234.5.67, Culture=neutral, PublicKeyToken=3d67ed1f87d44c89'. StackTrace: at System.Runtime.Serialization.Formatters.Binary.BinaryAssemblyInfo.GetAssembly( ) at System.Runtime.Serialization.Formatters.Binary.ObjectReader.GetType(BinaryAsse mblyInfo assemblyInfo, String name) at System.Runtime.Serialization.Formatters.Binary.ObjectMap..ctor(String objectName, String[] memberNames, BinaryTypeEnum[] binaryTypeEnumA, Object[] typeInformationA, Int32[] memberAssemIds, ObjectReader objectReader, Int32 objectId, BinaryAssemblyInfo assemblyInfo, SizedArray assemIdToAssemblyTable) at System.Runtime.Serialization.Formatters.Binary.ObjectMap.Create(String name, String[] memberNames, BinaryTypeEnum[] binaryTypeEnumA, Object[] typeInformationA, Int32[] memberAssemIds, ObjectReader objectReader, Int32 objectId, BinaryAssemblyInfo assemblyInfo, SizedArray assemIdToAssemblyTable) at System.Runtime.Serialization.Formatters.Binary._BinaryParser.ReadObjectWithMa pTyped(BinaryObjectWithMapTyped record) at System.Runtime.Serialization.Formatters.Binary._BinaryParser.ReadObjectWithMa pTyped(BinaryHeaderEnum binaryHeaderEnum) at System.Runtime.Serialization.Formatters.Binary.__BinaryParser.Run() at System.Runtime.Serialization.Formatters.Binary.ObjectReader.Deserialize(Header Handler handler, __BinaryParser serParser, Boolean fCheck, Boolean isCrossAppDomain, IMethodCallMessage methodCallMessage) at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize(Str eam serializationStream, HeaderHandler handler, Boolean fCheck, Boolean isCrossAppDomain, IMethodCallMessage methodCallMessage) at System.Runtime.Remoting.Channels.CrossAppDomainSerializer.DeserializeObject(Me moryStream stm) at System.AppDomain.Deserialize(Byte[] blob) at System.AppDomain.UnmarshalObject(Byte[] blob) For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp." Using FUSLOGVW.exe (i.e., Assembly Binding Log Viewer), I can see the problem is that IIS attempts to find MyThirdPartyLibrary in directory C:\windows\system32\inetsrv. It refuses to look in the bin folder of the web app, where the DLL is actually located. Does anyone know what the problem is? Thanks, Calvin

  Read the article

• Unmanaged DLL in C# Web Service

  - by Telis

  Hi Guys, please help µe as I am new into accessing an unmanaged DLL from C#.. I have a large unmanaged DLL in C++ and I am trying to access the DLL's classes and functions from a C# Web Service. I have seen many examples how to use DLLImport, but for some reason I am stuck with my very first wrapper method spending many hours with no luck.. What should I do to return an object in my 'Marshaled' [DllImport..] function? I would like to do something like that: [DllImport("unmanaged.dll")] public static extern MyClass MyFunction(); Here is the definition of my C++ class and the function that I want to access: class __declspec(dllexport) TPDate { public: TPDate(); TPDate(const TPDate& rhs); ... //today's date. static TPDate AsOfDate(void); ... } In my Web service I have declared the following StructLayout: [StructLayout(LayoutKind.Sequential)] public class TPDate { public TPDate(TPDate d) { _tpDate = d; } public TPDate _tpDate; } and here's where I think that I'm not doing something right: class WrapperTPDate { [DllImport("TPTools.dll", ExactSpelling=false, EntryPoint = "?AsOfDate@TPDate@@SA?AV1@XZ", CallingConvention = CallingConvention.StdCall)] [return: MarshalAs(UnmanagedType.Struct)] **public static extern TPDate AsOfDate();**// HERE THERE IS PROBLEM }; I am calling the wrapper as follows from my WebMethod: [WebMethod] public void ConstructModel() { TPDate date1 = WrapperTPDate.AsOfDate();// Here I get exception TPDate date = new TPDate(date1); } The exception i am getting is: System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.Runtime.InteropServices.MarshalDirectiveException: Cannot marshal 'return value': Invalid managed/unmanaged type combination (this type must be paired with LPStruct or Interface). If I change it to LPSTRUCT, I am getting another exception: System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt Could you please tell me where I'm doing wrong here Thanks

  Read the article

< Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >