Search Results

Search found 11268 results on 451 pages for 'shweta simply'.

Page 305/451 | < Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >

• Bizarre client IP switch-up on VPN

  - by B. VB.

  Let A.B.C.D be the public IP of my VPN server. Let W.X.Y.Z be the IP of the client before it connects to the VPN. My VPN server's IP address on the LAN in 10.8.0.1, and the client is 10.8.0.6. I also run a webserver on the same machine hosting the VPN. On it is a simple webpage that performs the exact same thing as whatismyip.org (i.e., simply prints the IP of the requester) Let me illustrate the scenario for you. In a Chrome window I have three tabs, what I have in parenthesis is the URL: Tab 1 (http://whatismyip.org): A.B.C.D This is what I expect to see. It's the public IP of the VPN server. Tab 2 (http://10.8.0.1): 10.8.0.6 ok, looks expected. They are behind the same LAN now. Tab 3 (http://A.B.C.D) W.X.Y.Z WTF?? Basically, if I access the webserver while tunneled, in shows the IP address of my machine PRIOR to tunelling! Remember, tab2 and tab3 are the same webpage. Why does Tab3 not show the client IP as it's own IP (i.e., show A.B.C.D)??? I hope this question is clear, thanks in advance!

  Read the article

• Removing expired self-signed certificate in IE9 (created with IIS7.5)

  - by Itison

  Over 1 year ago, I created a self-signed certificate in IIS 7.5 and exported it. I then installed it for IE9 (it may have been IE8 at the time), which worked fine until a year later when the certificate expired. I have put this off, but today I created a new self-signed certificate in IIS, exported it, and attempted to install it in IE9. The problem is that for whatever reason, IE cannot seem to forget about the old, expired certificate. Here's what I tried initially: Accessed my ASP.NET application and see the Certificate error. Clicked "View certificates". Clicked "Install Certificate" and then Next/Next/Finish. At this point, it says the import is successful, but it still only shows the expired certificate. I've tried simply double-clicking on the exported certificate on my desktop. Initially I chose to automatically select the certificate store, but then I tried it again and manually selected "Trusted Root Certification Authorities". I've also tried dragging/dropping the certificate over an IE window and clicking "Open". The process is then exactly the same as it is if I had double-clicked on the certificate, but I had hoped that this would somehow specifically tell IE to use this certificate. I tried opening MMC and with the Certificate snap-in, confirmed that the new certificate was added under "Trusted Root Certification Authorities". It was also under my "Personal" certificates (I guess this is where it goes by default). Nothing worked, so I went through every folder in MMC and deleted the expired certificate. I also deleted the expired certificate in IIS. Nothing has worked. Any ideas? I see no clear resolution and I can't seem to find any posts related to this issue.

  Read the article

• How to Access User Directory shared by Apache on OS X Mountain Lion?

  - by schluchc

  When trying to access the local user web page on localhost/~username, I get a "403 Forbidden". The system web page in /Library/WebServer/Documents is accessible on localhost/ though, so I assume Apache is working fine. I know that this problem has been discussed several times, also on superuser. I implemented and checked all I could find, but I still couldn't solve the problem and would be glad if someone had a suggestion for this particular case: sudo apachectl -t returns Syntax OK. I have a username.conf file in /etc/apache2/users/: <Directory "/Users/username/Sites/"> Options Indexes MultiViews FollowSymLinks AllowOverride AuthConfig Limit Order allow,deny Allow from all </Directory> as proposed here [SuperUser] and in several other tutorials. The permissions of the username.conf file are -rw-r--r-- root wheel, as they should be. The httpd.conf is unchanged and therefore contains the line Include /private/etc/apache2/extra/httpd-userdir.conf. That file in turn contains UserDir Sites Include /private/etc/apache2/users/*.conf <IfModule bonjour_module> RegisterUserSite customized-users </IfModule> So the httpd*.conf files should be ok. The permissions of /Users/username/Sites is drwxr-xr-x 10 username staff and -rw-r--r--@ 1 username staff for the index.html. In the error log I simply get a [Sun Nov 25 22:14:32 2012] [error] [client 127.0.0.1] (13)Permission denied: access to /~username/ denied. And yes, after each change I did the sudo apachectl restart. Any help no how to solve the problem or how to further analyze it would be highly appreciated!

  Read the article

• SSL Mail server connection times out on send()

  - by Jivan

  When trying to programmatically send an email from a website of mine, with PHP Pear Mail package with SSL connection, PEAR:Mail replies the following : Failed to connect to example.blabla.net:PORT [SMTP: Failed to connect socket: connection timed out (code: -1, response: )] I looked for similar questions on SO and SF, all the answers asking the OP to test a request on telnet or ssh in command line. So, that is what I did and here is what happens : $ ssh -l myusername -p PORT example.blablabla.net _ Here, '_' in the second line means that NOTHING happens. Indefinitely, which seems coherent with the timeout message I had from PEAR:Mail. So PEAR:Mail seems out of cause. But, what I have to tell you is that yesterday, it just worked. Connection was properly established, mails were properly sent, etc. Just today, it doesn't work anymore and I absolutely don't know why. I restarted Apache (in case an extension was broken), restarted mail services, etc. Still. No effect. Before yesterday (when it worked) and today (when it doesn't anymore), I just didn't touch the server and did nothing on it, simply because I took a day off to write some blog post! Have anyone of you encountered similar problem ? The problem seems quite common, judging after some googling, but the solution doesn't. Thanks for any help ! (note on config : CentOS 6.4 x86_64 with cPanel/WHM)

  Read the article

• Common folder in linux

  - by rks171

  I have two users on my Ubuntu machine. I want to share some media files between these users, so I created a directory in /home/ called 'media'. I made the group 'media' and I added my user 'rks171' to the group 'media'. So: sudo groupadd media sudo mkdir -p /home/media sudo chown -R root.media /home/media sudo chmod g+s /home/media As was described in this post. Then, I added my user to the group: sudo usermod -a -G media rks171 Then I also added write permission to this folder for my group: sudo chmod -R g+w media So now, doing 'ls -lh' gives: drwxrwsr-x 2 root media 4.0K Oct 6 09:46 media I tried to copy pictures to this new directory from my user directory: mv /home/rks171/Pictures/* /home/media/ And I get 'permission denied'. I can't understand what's wrong. If I simply type, 'id', it doesn't show that my user, rks171, is part of the 'media' group. But if I type, 'id rks171', then it does show that my user, rks171, is part of the 'media' group. Anybody have any ideas why I can't get an files into this common folder?

  Read the article

• mysqldump isn't able to export a specific database, phpMyAdmin crashes

  - by Devils Child

  I'm experiencing problems with a database on my server (Note: All other databases work fine). Once I try to export it with mysqldump I get this error: # mysqldump -u root -pXXXXXXXXX databasename > /root/databasename.sql mysqldump: Couldn't execute 'show table status like 'apps'': Lost connection to MySQL server during query (2013) Also, phpMyAdmin throws an error when selecting this database and immediately logs out. However, the web site which uses this database works fine. I can also execute SELECT statements on the table named "apps" from the MySQL shell. I tried restarting the MySQL daemon as well as REPAIR DATABASE and REPAIR TABLE but the problem still persists. I had this problem before, then it disappeared somehow without me doing anything to resolve the issue. Now, the problem is back and I'm simply unable to create a backup of this database. Used software Debian 6.0.7 x64 MySQL 5.1.66-0 MySQL Version: mysql> SHOW VARIABLES LIKE "%version%"; +-------------------------+-------------------+ | Variable_name | Value | +-------------------------+-------------------+ | protocol_version | 10 | | version | 5.1.66-0+squeeze1 | | version_comment | (Debian) | | version_compile_machine | x86_64 | | version_compile_os | debian-linux-gnu | +-------------------------+-------------------+

  Read the article

• CentOS server. What does it mean when the total used RAM does not equal the sum of RES?

  - by Michael Green

  I'm having a problem with a virtual hosted server running CentOS. In the past month a process (java based) that had been running fine started having problems getting memory when the JVM was started. One strange thing I've noticed is that when I start the process, the PID says it is using 470mb of RAM while the 'used' memory immediately drops by over a 1GB. If I run 'top', the total RES used across all processes falls short of the 'used' listed at the top by almost 700mb. The support person says this means I have a memory leak with my process. I don't know what to believe because I would expect a memory leak to simply waste the memory the process is allocated not to consume additional memory that doesn't show up using 'top'. I'm a developer and not a server guy so I'm appealing to the experts. To me, if the total RES memory doesn't add up to the total 'used' it indicates that something is wrong with my virtual server set-up. Would you also suspect a memory leaking java process in this case? If I use free before: total used free shared buffers cached Mem: 2097152 149264 1947888 0 0 0 -/+ buffers/cache: 149264 1947888 Swap: 0 0 0 free after: total used free shared buffers cached Mem: 2097152 1094116 1003036 0 0 0 -/+ buffers/cache: 1094116 1003036 Swap: 0 0 0 So it looks as though the process is using (or causing to be used) nearly 1GB of RAM. Since the process (based on top is only using 452mb, does that mean that the kernal is all of a sudden using an additional 500mb?

  Read the article

• How to distribute multiple executions of an app across many machines

  - by Salec

  I've got a simulation app (64-bit windows) that runs without any user interaction. This app gathers information and pushes it to a remote MS SQL Server. What I'd like to do is execute this simulation as many times as I can on multiple machines after our nightly build has finished and it has passed the test suite. If possible I'd love to have the ability to configure it to stop after x total runs or if the entire batch has taken over y hours. I've tried using Visual Studio's built in test framework since we already have a test lab set up with multiple agents. I created a single unit test that simply runs the simulation then I created an ordered test and added that single test multiple times (from what I gather, this is the only way to execute the same unit test more than once). I found that ordered tests are only run on a single agent and not distributed which is very limiting. We use TeamCity to perform our nightly builds and I suspect it's possible to implement this on top of that, but I'm fairly new to TeamCity. We also have Jenkins and Bamboo available and I'm open to any other software that would get the job done presuming it runs on a 64-bit Windows OS. Any suggestions?

  Read the article

• Router as primary DNS server, Server as alternate? (or vice versa)

  - by Jakobud

  We have a very small business network, with a typical cable modem hooked into a DD-WRT router. We also run a basic CentOS server that does a variety of things, including acting as the primary DNS server for the office. The reason we need an internal DNS server is because we do a lot of internal web development and use the DNS server to add/remove various local network URLs for internal website testing (like www.testsite.com.local). It's very important for us to be able to add/remove URL aliases easily to the DNS. The problem with this setup is that if we ever need to restart the CentOS server or take it offline for upgrades or whatever, then internet access for all computers on the network is lost. That's because each computer relies on that DNS server to access the Internet I guess? The router is online all the time and very very rarely has to be restarted. It would be nice if we could setup my router to be the primary DNS server but still be running DNS on my server. So we could still add my local testing website URLs to the DNS server in CentOS, but be able to also take down the CentOS server without loosing Internet access on the network. How would this be setup? Would I simply need to add both router + server IP addresses to each computer's IP settings? Is the router primary DNS and server secondary DNS server? Or vice versa? Or can one of the two serve as a fallback for the other? What (if anything) needs to be configured on both the router and server in order for them to recognize that the other DNS server exists on the network? Does anyone have any newb-friendly resources for setting up something like this?

  Read the article

• extra managed+unmanaged switches @ home/office -- best (mis)usage scenario? what would you do?

  - by locuse

  up front -- definitely NOT a mission-critical kind of question. after a 'spring cleaning' of my local office, i've ended up with two 'spare' GigE switches at my home/office -- one managed, capable of VLANs, QoS, etc, and the other unmanaged. i've got more ports than i need. in fact EACH switch has more total ports than i need. but, since i can't have these just sitting around not doing SOMETHING ... ;-) i'm interested in ideas for best combined use of these switches. my local topology is simple: [ net ] -- [ adsl2 modem ] -- [linux firewall/router/DNS ] _______________| | [ some arrangement of the 2 GigE switches ] | ( ... stuff on the lan ... ) [WAP1] [voip ATA] [printer] [desktop1] [mail server] [Xen server [desktop2] ( mostly dev, [desktop3] + file server [desktop4] + media server)] the MailServer is a production mail server the XenServer serves some low vol to the 'net; the MediaServer guest serves ONLY to the LAN is there, e.g., any performance value in segmenting off any of the LAN using the managed switch (VLAN? QoS tagging? something?), feeding the rest into the connected unmanaged switch? or should i simply use one of the switches & be done with it, and use the other for a coffee-cup stand?

  Read the article

• Linux as a gateway (no NAT)

  - by Hugo

  I'm trying to configure a linux server as a gateway/router, but I can't get it to work, and all information I've managed to find is NAT-related. I have a public IP block for the gateway and devices behind it, so I want the gateway to simply route packets to the internet - again: no NATing! I've managed to get the gateway to access the internet successfully (that was just a matter of configuring the IP and GW), and the computers behind it can communicate with it. [EDIT: more info] This is actually an IPv6 block (2800:40:403::0/48) (but I've found that most utilities and instructions can be easily adapted from IPv4 to IPv6 with little hastle). The server has too ports: wan: 2800:40:403::1/48 lan: 2800:40:403::3/48 One of the computers behind it is connected to it via a switch; 2800:40:403::7/48 The wan interface on the server can ping6 www.google.com without issues. The lan interface on the server and the client can mutually ping each other without issues (as well as SSH, etc). I've tried setting the server as a default gateway for the client, with no luck: client # route -A inet6 add default gw 2800:40:403::3 dev eth1 server # cat /proc/sys/net/ipv6/conf/all/forwarding 1 I don't want any filtering/firewalling/etc, just plain routing. Thanks.

  Read the article

• What's the safest way to kick off a root-level process via cgi on an Apache server?

  - by MartyMacGyver

  The problem: I have a script that runs periodically via a cron job as root, but I want to give people a way to kick it off asynchronously too, via a webpage. (The script will be written to ensure it doesn't run overlapping instances or such.) I don't need the users to log in or have an account, they simply click a button and if the script is ready to be run it'll run. The users may select arguments for the script (heavily filtered as inputs) but for simplicity we'll say they just have the button to choose to press. As a simple test, I've created a Python script in cgi-bin. chown-ing it to root:root and then applying "chmod ug+" to it didn't have the desired results: it still thinks it has the effective group of the web server account... from what I can tell this isn't allowed. I read that wrapping it with a compiled cgi program would do the job, so I created a C wrapper that calls my script (its permissions restored to normal) and gave the executable the root permissions and setuid bit. That worked... the script ran as if root ran it. My main question is, is this normal (the need for the binary wrapper to get the job done) and is this the secure way to do this? It's not world-facing but still, I'd like to learn best practices. More broadly, I often wonder why a compiled binary is more "trusted" than a script in practice? I'd think you'd trust a file that was human-readable over a cryptic binaryy. If an attacker can edit a file then you're already in trouble, more so if it's one you can't easily examine. In short, I'd expect it to be the other way 'round on that basis. Your thoughts?

  Read the article

• Connecting to network device behind NAT from local LAN using the external port and IP

  - by lumbric

  I noticed at several different LANs connected to the Internet through a NAT the following phenomena. There is a server in the LAN and there is a port forwarding to reach this server also from outside the LAN through the NAT. E.g. consider a LAN with the address 192.168.0.* and a SSH server at 192.168.0.2 with port 22 and a forwarding from port 2222 at the NAT 192.168.0.1 to 192.168.0.2:22. If the NAT's external IP is 44.33.22.11, one can connect to the SSH server through 44.33.22.11:2222. Surprisingly this works only from outside the LAN. If one tries to connect to 44.33.22.11:2222 from behind the NAT, there is no answer. Of course one could simply use 192.168.0.2:22, but often it is simpler to use the external IP. The typical use case for me is the configuration on a laptop computer. Usually the user uses any arbitrary Internet connection to connect to his home or office server, but sometimes he will use also the LAN to connect to it and it would be annoying to have to different configurations or bookmarks. Why does it fail to connect from inside the LAN? Is there any good work around?

  Read the article

• JBoss database connection pool configuration

  - by Qben

  I am facing an connection pool issue in my clustered JBoss installation. From time to time one of my connection pools will hit the roof and I get a lot of these in my logfile. java.sql.SQLException: No ManagedConnections available within configured blocking timeout ( 30000 [ms] ); The odd thing is that I can see in the JMX console that the ConnectionCount hit the roof, but at the same time InUseConnectionCount is often quite small. The problem will resolve itself after a couple of minutes but during recovery phase my application will not work (for obvious reasons). The question is if this indicate an error in the configured timeouts of the connections (I pretty much use defaults), or if my pool is simply too small to handle the peaks. Under normal operation I would say I use ~40% of the configured max number of connections. The reason I just don't increase the max number of connection is that if I actually used up all connections I suspect that InUseConnectionCount would hit the roof. Hence I suspect I might have more issues than just a too small pool size. Maybe InUseConnectionCount has decreased at the time I check jmx-console and it actually do hit the roof? I tend to collect data every second minute. Any hints are more than welcome.

  Read the article

• Laptop CPU fan not working properly

  - by Smith

  My laptop's CPU fan is suddenly acting very bizarre, and I am at a loss for what to do so I am asking for some help. Specifically, the fan is not even starting to spin until the CPU reaches 60 degrees Celsius (checked through HWmonitor). Once it is on, however, it properly stays on even when the CPU gets back to idle temps around 38 Celsius. Before, the fan was simply starting with the computer and staying on like normal. I've checked this for consistency both by allowing cold boots to ramp up temperature to 60 Celsius (the slow climb also causing the laptop to become unreasonably warm near the heatsink), and also running Prime95 immediately to kickstart the fan (this works every time). The fan seems to be stationary when turning the computer on from either sleep or shutdown. The fan will start at POST very briefly, and then stop completely. I've checked the BIOS for a SmartFan setting but haven't found any. I've opened the case to check for dust or debris and have not found anything (I applied some canned air to the area just in case). The laptop is a Lenovo ThinkPad Edge E430 and the CPU is an Intel Core i5 3210m @ 2.5 GHz. Any advice would really be appreciated.

  Read the article

• Replacing Failing RAID 1 Drive

  - by mrduclaw

  I hope this is a simple question, but I simply don't know anything about RAID. Some time ago I received a machine that, as I understand it, has two drives in it under RAID 1 (or so that one drive is mirrored on the other and appears as just 1 drive to the OS). Recently, one of these drives has started marking a clicking noise and I would like to replace it. I believe the machine has a hardware RAID controller on the motherboard that handles the RAID stuff, but if it matters the Operating System is Windows XP 32-bit. Is the solution to my problem as simple as buying another drive that is of the same capacity and plugging it in where the clicking drive is currently? Or could I possibly lose everything if the drive that's clicking is the one being mirrored on to the other drive? Is there some menu I need to find before unhooking things? Any best practices out there? I'm sure I'm leaving out some required information, so please just tell me what I'm missing. Thanks!

  Read the article

• Unable to mount iso as dvd drive in VMware Fusion 6

  - by John O

  I have a newer iMac without an optical drive and some DVDs that I needed to run software off of. This software will have you juggle discs to read data off of them, and the data can't simply be copied to the machine's drive. I used a windows machine to make ISOs of these DVDs. And the first disc, the installer, it will mount in VMware and let you install the software. It then asks for the other discs, and these won't mount as ISOs. If I mount them as drive images, they'll show up on the iMac's and I have access to all the files. But if I try to mount them as the dvd drive through Fusion, nothing happens. For that matter, I'm unable to attempt it a second time, as Fusion believes that the there is already an iso mounted as the dvd, while nothing has happened as far as the guest OS is concerned. drutil eject will allow me to eject the ghost/non-existent dvd, at which point I can make a second (equally futile) attempt. Does anyone have an explanation for this behavior? How can the ISO be valid enough to mount as a drive image, but not valid enough for Fusion to mount it as if it were a dvd?

  Read the article

• How to securely connect to multiple different LDAPS servers (Debian)

  - by Pickle

  I'm trying to connect to multiple different LDAPS servers. A lot of the documentation I've seen recommends setting TLS_REQCERT never, but that strikes me as horribly unsecure to not verify the certificate. So I've set that to demand. All the documentation I've seen says I need to update ldap.conf with a TLS_CACERT directive pointing to a .pem file. I've got that .pem file set up with the certificate from LDAP Server #1, and ldaps connections are happening fine. I've now got to communicate securely with another LDAP server in another branch of my organization, that uses a different certificate. I've seen no documentation on how to do this, except 1 page that says I can simply put multiple (not chained) certificates in the same .pem file. I've done this and everything is working hunky dorey. However, when I told a colleague what I did, he sounded like the sky was falling - putting 2 non-chained certificates into one .pem file is apparently the worst thing since ... ever. Is there a more acceptable way to do this? Or is this the only accepted way?

  Read the article

• How to get desired FireFox last tab behavior?

  - by JustJeff

  All tabs should be the same; so if any of the have a 'close' button, they all should, including the last tab. I see no reason that a tab's close button should suddenly vanish simply b/c that tab has become the last one open. If I have N tabs open, and park the mouse over the left-most tab's close button, this vanishing close button trick means now I have to make a large mouse move to get to the app's close button. Unsat. Mouse moves = too many milliseconds wasted. Closing the last tab should NOT take me to my home page, or any other page whatsoever. I want the browser to close with the last tab. I do not expect or want "new tab" behavior when I click a Close button. Now, I've gone into about:config and played with browser.tabs.closeWindoWithLastTab, but this setting oversteps its purpose; while it does make the browser close, for some inexplicable reason, it also suppresses the last tab's close button! I have tried the "last tab close button" add-on, and while this does restore the close button, the add-on oversteps by taking the liberty of turning closeWindowWithLastTab off. Is there some way out of this pickle? Is it too hard to just code things to provide simple, orthogonal actions, so that everybody can config the UI to their liking, and not just to a few pre-fab configurations that the developers think everyone should like? Btw, FF 13.0.1 on ms windows

  Read the article

• Windows 7 Laptop Randomly Sleeping

  - by Josh Arenberg

  I'm running Windows 7 64-bit on a Lenovo laptop, and I have a problem wherein after I've put it to 'sleep' once, it will seemingly without any reason or warning go back to sleep every 10 to 15 minutes after that. Each time it wakes back up just fine, and you can happily continue on. However, 10 or 15 minutes later, it just drops out into sleep mode. I don't see any errors in the system logs. I don't think it's related to heat ( since it's not rebooting ). When I check the system event log, I can see where the machine goes to sleep, but it simply says "reason: application API", and doesn't indicate which app ( brilliant ). I don't see any errors from hardware or anything relating to sleep in the application log that would point to what is going on either. How can I find out which app is triggering this? EDIT: I confirmed that temperature wasn't the issue. I think it's important to keep in mind that this condition only happens after the first sleep. If I reboot, the problem goes away until I put it to sleep, after which it sleeps on it's own every few minutes. Is there no way to capture which app is calling the sleep routine?

  Read the article

• Long running php script hangs/terminates on IIS 7.5

  - by Rich

  I'm a bit of nube when it comes to configuring IIS 7.5 and Php so apologies if this is a silly question but I've been wrestling with this for over half the day and need some fresh input. I have a php application running on IIS 7.5 , php 5.4 running as fastcgi. The application works absolutley fine with the exception that long running php scripts seem to hang; no 500 error they simply seem never complete and return the results to the browser. I've written a simple test script below to eliminate the possibility of programming error in the main app : <?php /* test timeout */ /*set_time_limit(110);*/ echo "Testing time out in seconds\n"; for ($i = 0; $i < 175; $i++) { echo $i." -- "; if(sleep(1)!=0) { echo "sleep failed script terminating"; break; } } ?> If I run the script beyond 175 seconds it hangs. Below that it will return the results to the browser. Here are the time out parameters that I've set for php and fastcgi. I've also played around setting these really low in order to get various time out errors and have succeeded which brings me to the conclusion that there's another setting that I'm missing .. perhaps. fastcgi activity timeout=800 Idle Timeout = 900 request Timeout 800 Php max_execution_time=700 Any solutions or pointers in the right direction would be very ... very welcome. Thanks

  Read the article

• Windows Server 2008 R2 grinds to a screeching halt during file copy operations

  - by skolima

  When my Windows Server 2008 R2 machine is performing any large disk operations (copying 10GB files from one drive to another, copying similar file over network, merging HyperV snapshots, compressing large files), performance of the whole machine slows down terribly, everything becomes unresponsive. This is noticeable in any situation when the disk access is large enough not to fit in the cache. Are there any settings available for tuning this behaviour? I can accept slower file transfer if this would give me more responsiveness. System details: Dell Optiflex 960, Core 2 Quad Q9650, 8GB RAM, 2 SATA drives - 320GB (ST3320418AS) and 1TB (ST31000528AS), NCQ active on both, Intel 82564LM-3 Gigabit Ethernet, ATI HD 3450 graphics, Intel ICH10 bridge. We have multiple machines like this, every one is exhibiting the same behaviour. I though this was overkill for a workstation, apparently I was mistaken. Update: I guess I shouldn't have mentioned the HyperV at all. The above configuration is a standard workstation setup at the company I work for, this is not a server of any kind. I have at most 3 virtual machines working, and usually I'm the only person accessing them. Never the less, the slowdown occurs even when no VMs are running. On a Linux machine I'd simply ionice the copy process and I could forget about it, is there any way to manage IO priorities on Windows?

  Read the article

• linux: per-process monitor, every 10 minutes, with history access

  - by Inbar Rose

  I really didn't know a better way to ask my question, hence you get a horribly named question. I will explain what i want to do, maybe that will help you help me. I would like to have my linux machine continuously monitor (every 10 minutes) all the processes on my machine. The information from each process that I require is the name, CPU usage, allocated (virtual) memory, and resident (ram) memory. If these periodic reports were to be looked at, they would look something like this: PROCESS CPU RAM VIRTUAL name1 % MB MB name2 % MB MB ...etc..etc These reports should be stored in such a way that I can access them at a later date by giving a date/time scope (range). For instance, if I want to see the history of my processes from 12:00:00 1.12.12 till 12:00:00 2.12.12 I can - and it should give me the history of the processes for every 10 minutes between those date/time borders. The format of the return is not important, that will be handled by a script anyway and can be modified into anything I need. I have looked into a few things so far, but have not found something that clearly meets my needs. Among the things i searched: sar, free(1), top(1).. and a few other things. It should be a simple issue, i can already see all this information by simply looking at my htop, but i need only a tool that will gather the desired fields for me for each processes every 10 minutes, and then also let me extract slices of that data based on date/time scopes (ranges). note: I have limited experience with linux, so please give detailed information. note2: The desired output will be something like this (after receiving the desired range) CPU USAGE BY PROCESS: proc_nameA 1,2,2,2,2,2...... numbers represent % usage every 10 minutes... proc_nameB 4,3,3,6,1,2...... The same idea with the other information.

  Read the article

• Allied Telesis router: IP filtering for the LOCAL interface

  - by syneticon-dj

  Given an Allied Telesis router with an AlliedWare OS (2.9.1) I would like to disable access to all management services of the router except for a number of subnets (or alternatively have what is a "management VLAN" with other manufacturers' switch and router models). What I have tried so far: creating a new VLAN and an appropriate IP interface, setting the LOCAL IP into this subnet, creating an IP filter for the IP interface and specifying my exclusion subnets: it simply does not work as intended as I can access the LOCAL IP set from any of the other VLAN interfaces - the traffic is apparently not going through my defined filter set at all creating a new IP filter set and binding it to the LOCAL IP interface: this seems not to affect any kind of traffic at all, the counters for the filter set remain at zero packets setting the Remote Security Officer Level IP address range: this only restricts the ability for a user with the Security Officer privilege level to log in from any but the specified address ranges / subnets. Unfortunately, it does not prevent service availability (and thus DoS capacity) or the ability to log in as a less privileged user (e.g. a "manager") calling technical support: unfortunately no solution so far What I have not tried: creating a filter set for each and every IP interface defined on the router and excluding access to the router's management IP: I would like to reduce the overhead induced by IP filters as the router already is CPU-constrained at times. Setting up filters for every IP interface would mean that each and every traffic packet would have to pass the filters, thus consuming CPU cycles. If by any means possible, I would like to find a different solution.

  Read the article

• Wires from fan on side panel - where do they connect?

  - by Mick

  The side panel of my desktop PC has a small fan built in. There were two wires, one red one black that connected inside the PC. Unfortunately I had the bolts removed and the side door fell off ripping the cables such that the main length of cable remains attached to the fan. So there must be two short stubs of broken cable somewhere - but I can't find them! Any ideas where I should look? I can't see anything on the motherboard. the PC is running perfectly well - but I now have the side open to make sure the air can circulate. EDIT: The motherboard appears to be an "Asus P6T SE" EDIT: The manual shows the location of two "chassis fan" connectors. One is being used by a big chassis fan on the back face of the PC (underneath the pwer supply). The other appears to be unused - there is no stub of a connector with wires - its just the bare pins sticking directly out of the motherboard. There is also an unused "pwr_fan" connector. Would it be ok to simply connect the black and red wires from the fan to the black and red parts of a molex adapter?

  Read the article

< Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >