Search Results

Search found 8886 results on 356 pages for 'dns hosting'.

Page 306/356 | < Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >

  • Port forwarding + shared connection with Ubuntu

    - by Joey Adams
    Because my wireless router's ethernet ports are defective, I set up a shared wireless connection from my laptop (which has wifi) to my eMac (which does not) via a crossover ethernet cable. The laptop is behind a router as 192.168.1.131, and the eMac is behind the laptop as 10.42.43.1 . The laptop is running Ubuntu 9.10 (Karmic). I achieved the shared connection through NetworkManager Applet. I right-clicked on the network icon at the topright, went to Edit Connections, selected the Wired connection named "Auto eth0", clicked "Edit...", went to the "IPv4 Settings" tab, and selected the Method "Shared to other computers". The eMac can now access the Internet. Now I want to enable port forwarding. There's a game I want to play that needs port 6112 forwarded (both TCP and UDP) in order to host games. I set up the router to enable port forwarding for 192.168.1.131 (the laptop), but port forwarding still isn't available on the eMac. I suppose I need to pretend my laptop is a router and configure port forwarding on it, indicating that incoming connections to the laptop (192.168.1.131) should be forwarded to the eMac on the shared connection (10.42.43.1 ). Thus, packets coming into the router on port 6112 would be redirected to the laptop (by the router), then to the eMac (by the laptop). My question is, how would I do that on Ubuntu (in light of NetworkManager's presence)? Also, if I can't get this to work, does anyone mind hosting a comp stomp? :D

    Read the article

  • Can any postfix guru assist me determine how emails are still being sent via my server from unauthorized sources?

    - by Dave
    Hi all, I'm getting a little concerned as I run a small server hosting a number of websites and manage the email for a few dozen people. Just recently though I've had a couple of notifications from spamcop alerting me that spam has been sent from my server, and when I have a look over the logs from time to time I can indeed see that there are many repeated attempts of mail being sent from my server. Most of the time it gets knocked back from the destination servers but sometimes its getting through. Unfortunately I'm not linux or postfix expert, I can get by but had though I had my machine locked down quite securely, I don't allow relaying, when I check the online DNS/MX tools they tend to report my server as being OK so I'm not sure where to take it now and hoping someone might be able to throw me a few pointers. I get lots of entries like this in my MAIL.INFO log Jan 2 08:39:34 Debian-50-lenny-64-LAMP postfix/qmgr[15993]: 66B88257C12F: from=<>, size=3116, nrcpt=1 (queue active) Jan 2 08:39:34 Debian-50-lenny-64-LAMP postfix/qmgr[15993]: 614C2257C1BC: from=<[email protected]>, size=2490, nrcpt=3 (queue active) and Jan 7 16:09:37 Debian-50-lenny-64-LAMP postfix/error[6471]: 0A316257C204: to=<[email protected]>, relay=none, delay=384387, delays=384384/3/0/0.01, dsn=4.0.0, status=deferred (delivery temporarily suspended: host mx.fakemx.net[46.4.35.23] refused to talk to me: 421 mx.fakemx.net Service Unavailable) Jan 7 16:09:37 Debian-50-lenny-64-LAMP postfix/error[6470]: 5848C257C20D: to=<[email protected]>, relay=none, delay=384373, delays=384370/3/0/0.01, dsn=4.0.0, status=deferred (delivery temporarily suspended: host mx.fakemx.net[46.4.35.23] refused to talk to me: 421 mx.fakemx.net Service Unavailable) then there tends to be connection timeouts, so from what I see even though I had relaying disabled.. something is getting by and trying to send.. So if you can help that will be greatly appreciated, and any further logging/config info I can supply. Thanks

    Read the article

  • Force Juniper-network client to use split routing

    - by craibuc
    I'm using the Juniper client for OSX ('Network Connect') to access a client's VPN. It appears that the client is configured to not use split-routing. The client's VPN host is not willing to enable split-routing. Is there a way for me to over-ride this configuration or do sometime on my workstation to get the non-client network traffic to by-pass the VPN? This wouldn't be a big deal, but none of my streaming radio stations (e.g. XM) work will connected to their VPN. Apologies for any inaccuracies in the terminology. ** edit ** The Juniper client changes my system's resolve.conf file from: nameserver 192.168.0.1 to: search XXX.com [redacted] nameserver 10.30.16.140 nameserver 10.30.8.140 I've attempted to restore my preferred DNS entry to the file $ sudo echo "nameserver 192.168.0.1" >> /etc/resolv.conf but this results in the following error: -bash: /etc/resolv.conf: Permission denied How does the super-user account not have access to this file? Is there a way to prevent the Juniper client from making changes to this file?

    Read the article

  • What is easiest no fail way to publish asp.net app?

    - by Maestro1024
    What is easiest no fail way to publish asp.net app? Sorry a bit of an open ended question but I am having issues deploying an asp.net report project and any solution to get the site up is fine. I am running Win7/SQL 2008 and want to publish a asp.net report site that I created in VS 2008. Website launches when I run in debug in Visual studio but I want to publish the site so that it can be seen on the LAN. I published the files off to a folder and started up the IIS manager and added a new site and pointed to that folder. Set the permission on the folder to share to everyone. However when I go to the DNS name I put in for the website it does not launch. Any ideas on this? I see websites out there talking about a web sharing tab on the folder properties but I do not see that when I go to folders. Why might that be? Another avenue I have not pursued yet is publishing directly to a website. Has anyone tried that? Is that better or worse than publishing to filesystem?

    Read the article

  • need advice on data center move, communication with both facilities during transition

    - by Brian Roden
    We are beginning the process of moving to a new facility. Office and warehouse operations will both be moving, and we must get shipping operations up and running at the new location while continuing to ship from the old location. Our contract with some third-party warehouse tenants requires two business day turnaround (only weekends and holidays excluded), so we can't have major downtime during the move. We would like to keep our 172.16.60/61.xxx internal address space in use throughout the move. Is it possible to keep using this same internal range, and have our existing WatchGuard Firebox 520 and whatever router we get for the other location (preferably the same model) just treat both locations as one network, leaving our host IPs the same throughout the move? Renumbering the servers when they move isn't a big deal, but our wireless terminals for order picking in the warehouse have fixed IPs (and a fixed IP, non-DNS reference to the host they speak with) and would be a massive undertaking to reconfigure when the servers move (each device would have to be reconfigured at least 2 times -- some when we start using them in the new building and the host is still here, all of them in both locations when the host moves to the new building, and the rest when they finally make the move to the new building). We're trying to avoid that if possible.

    Read the article

  • Nginx: Serve static files out of a given directory - one level too deep

    - by Joe J
    I'm pretty new to nginx configs. I'm having some difficulty with a pretty basic problem. I'd like to host some static files at /doc (index.html, some images, etc). The files are located in a directory called /sites/mysite/proj/doc/. The problem is, is that with the nginx config below, nginx tries to look for a directory called "/sites/mysite/proj/doc/doc". Perhaps this can be fixed by setting the root to /sites/mysite/proj/, but I don't want to potentially expose other (non-static) assets in the proj/ directory. And for various reasons, I can't really move the doc/ directory from where it is. I think there is a way to use a Rewrite rule to solve this situation, but I don't really understand all the parts, so having some difficulty formulating the rule. rewrite ^/doc/(.*)$ /$1 permanent; I've also included a working example of hosting files out of a /sites/mysite/htdocs/static/ directory. > vim locations.conf location /static { root /sites/mysite/htdocs/; access_log off; autoindex on; } location /doc { root /sites/mysite/proj/doc/; access_log on; autoindex on; } 2011/11/19 23:49:00 [error] 2314#0: *42 open() "/sites/mysite/proj/doc/doc" failed (2: No such file or directory), client: 100.100.100.100, server: , request: "GET /doc HTTP/1.1", host: "myhost.com" Does anyone have any ideas how I might go about serving this static content? Any help is much appreciated. Thanks, Joe

    Read the article

  • Configured Samba to join our domain, but logon fails from Windows machine

    - by jasonh
    I've configured a Fedora 11 installation to join our domain. It seems to join successfully (though it reports a DNS update failure) but when I try to access \\fedoraserver.test.mycompany.com I'm prompted for a password. So I enter adminuser and the password and that fails, so I try test.mycompany.com\adminuser and that too fails. What am I missing? EDIT (Update 9/1/09): I can now connect to the machine and see the shares on it (see my response to djhowell's answer) but when I try to connect, I get an error saying The network path was not found. I checked the log entry on the Fedora computer for the computer I'm connecting from (/var/log/samba/log.ComputerX) and it reads: [2009/09/01 12:02:46, 1] libads/cldap.c:recv_cldap_netlogon(157) no reply received to cldap netlogon [2009/09/01 12:02:46, 1] libads/ldap.c:ads_find_dc(417) ads_find_dc: failed to find a valid DC on our site (Default-First-Site-Name), trying to find another DC Config files as of 9/1/09: smb.conf: [global] Workgroup = TEST realm = TEST.MYCOMPANY.COM password server = DC.TEST.MYCOMPANY.COM security = DOMAIN server string = Test Samba Server log file = /var/log/samba/log.%m max log size = 50 idmap uid = 15000-20000 idmap gid = 15000-20000 windbind use default domain = yes cups options = raw client use spnego = no server signing = auto client signing = auto [share] comment = Test Share path = /mnt/storage1 valid users = adminuser admin users = adminuser read list = adminuser write list = adminuser read only = No I also set the krb5.conf file to look like this: [logging] default = FILE:/var/log/krb5libs.log kdc = FILE:/var/log/krb5kdc.log admin_server = FILE:/var/log/kadmind.log [libdefaults] default_realm = test.mycompany.com dns_lookup_realm = false dns_lookup_kdc = false ticket_lifetime = 24h forwardable = yes [realms] TEST.MYCOMPANY.COM = { kdc = dc.test.mycompany.com admin_server = dc.test.mycompany.com default_domain = test.mycompany.com } [domain_realm] dc.test.mycompany.com = test.mycompany.com .dc.test.mycompany.com = test.mycompany.com [appdefaults] pam = { debug = false ticket_lifetime = 36000 renew_lifetime = 36000 forwardable = true krb4_convert = false } I realize that there might be an issue with EXAMPLE.COM in there, however if I change it to TEST.MYCOMPANY.COM then it fails to join the domain with a preauthentication failure. As of 9/1/09, this is no longer the case.

    Read the article

  • I think installing PostFix solved my problem, but it seemed *too* easy

    - by Joel Marcey
    Hi, This is a followup to a serverfault post I made a while ago: http://serverfault.com/questions/21633/how-do-i-target-a-different-mail-server-depending-on-domain-with-exim (More context here too: http://forum.slicehost.com/comments.php?DiscussionID=3806 ) I have a slice/VPS at Slicehost. I basically decided to scrap exim (i.e., purge it), and start anew with my email infrastructure. In case you didn't read any of the above threads, basically my goal was to have a send only mail infrastructure that relays all outgoing email to Google Apps. I also wanted to where email from domain1 (a Wordpress installation) would show it coming from domain1.com and email from domain2 (a normal website) would show it coming from domain2.com. So I decided to give PostFix a try. I literally followed the surprisingly simple instructions here: http://sudhanshuraheja.com/2009/02/slicehost-setup-outgoing-mail-google-apps-postfix/ And voila, all seems to be working as I expected. My email tests show email coming from the proper locations (either domain1 or domain2 depending on where the emails were sent from). But this all seemed too simple to me. So simple, in fact, that I feel that something is amiss. When I installed PostFix according to the instructions in the post above and it worked, I was surprised that I didn't have to specify an SMTP server, a port number, any authentication credentials, etc. My slice is set up such that I have MX records for Google Apps (e.g., ASPMX.L.GOOGLE.COM.) in my DNS settings, but I am not sure if that is why it is working. My email infrastructure knowledge is admittedly limited, but with this am I suspect to: Spammers using my email infrastructure? My emails going to people as spam? Something else sinister? I have actually stopped running PostFix until I understand this better. Thanks!

    Read the article

  • Hyper-V VM Lab + RRAS + RDP

    - by Dennis Evans
    My background is primarily .NET Development with some System Administration skills. I'm trying to set up a VM Lab for me to test System Applications I'm developing but I've only ever done System Administration in already set up environments; I've never set up my own. My current setup: Server 2008 R2 Hyper-V Host on physical machine (only role enabled) with two NICs. First NIC dedicated for Management w/ DHCP address from company's network. Second NIC dedicated to RRAS VM w/ DHCP address from company's network. RRAS VM has two NICS, one is virtual private internal only NIC w/ static entry. The other is the physical NIC mentioned above. I've joined it to my VMLab.net internal domain. My Active Directory Domain Controller server (ADCT) also runs DNS, DHCP, and Certificate Services which I'm familiar with but don't understand completely. RRAS is already set up with NAT to provide the private internal network with Internet access. What I would like to do is be able to RDP into the servers/computers on the VMLab.net domain from my computer. Do I need to add the Remote Desktop Services role and enable the Remote Desktop Gateway service on RRAS in order to do this or is there a way to set up port forwarding on RRAS to just allow a direct connection to the internal servers...or both? What would the best practices be here? Network Diagram http://i.stack.imgur.com/4qfnk.png

    Read the article

  • What is /etc/apache2/sites-available used for and is it necessary?

    - by Mariane
    I have 3 sites, each with a specific IP, running on apache2 (up-to-date Ubuntu). To put a site online, I just created a file in: /etc/apache2/sites-enabled and in this file I told apache which directory was the root directory for this site, and to which IP it should correspond. So I have 000-default 001-www.lapf.eu 002-www.felkin.info 003-www.seidhr.fr in this directory. My first site, lapf suddenly lost contact with its database after the domain name was transferred from another registrar unto the registrar who is also hosting the site's data. Then I did an update, and I reinstalled mysql-server and mysql-common, and I did I-have-forgotten-what to reinstall the locales (uft8 and such) which had vanished for some reason. This fixed my first site. Now I noticed that the other 2 sites are offline. Pointing a browser to them just hangs until timeout. They used to function, and their domain names did not move, they are still registered at the same place. The files are still in /etc/apache2/sites-enabled I noticed another directory: /etc/apache2/sites-available with just defaut and default.ssl in it. Why are there 2 directories, sites-enabled and sites-available? Should I copy the files from "sites-enabled" into "sites-available"? Or should I put a modified version of each in "sites-available"? command: "apache2ctl -S" VirtualHost configuration: 92.243.20.169:80 Charlotte (/etc/apache2/sites-enabled/001-www.lapf.eu:1) 92.243.21.141:80 xvm-21-141.ghst.net (/etc/apache2/sites-enabled/002-www.felkin.info:1) 92.243.4.114:80 xvm-4-114.ghst.net (/etc/apache2/sites-enabled/003-www.seidhr.fr:1) wildcard NameVirtualHosts and default servers: *:80 is a NameVirtualHost default server Charlotte (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost Charlotte (/etc/apache2/sites-enabled/000-default:1) Syntax OK

    Read the article

  • Is UPS worthwhile for home equipment?

    - by Jon Skeet
    Over the years, I've had to throw away a quite a few bits of computing equipment (and the like): Several ADSL routers with odd symptoms (losing wireless connections, losing wired connections, DHCP failures, DNS symptoms etc) Two PVRs spontaneously rebooting and corrupting themselves (despite the best efforts of the community to diagnose and help) One external hard disk still claiming to function, but corrupting data One hard disk as part of a NAS raid array "going bad" (as far as the NAS was concerned) (This is in addition to various laptops and printers dying in ways unrelated to this question.) Obviously it'll be impossible to tell for sure from such a small amount of information, but might these be related to power issues? I don't currently have a UPS for any of this equipment. Everything on surge-protected gang sockets, but there's nothing to smooth a power cut. Is home UPS really viable and useful? I know there are some reasonably cheap UPSes on the market, but I don't know how useful they really are. I'm not interested in keeping my home network actually running during a power cut, but I'd like it to power down a bit more gracefully if the current situation is putting my hardware in jeopardy.

    Read the article

  • On what should i not be pennywise buying a machine for SqlServer 2008?

    - by Michel
    Hi, i'm going to do a project for a client and i'll be hosting the database server myself. Normally it would be on my dev machine, but there will also be data pushed into it during developing and testing, so i would like to setup a dedicated test sql server. But, as you might guess, i can't afford to go to Dell and buy one mega 16 core 16 GIG 10 TB raid 5 machine (wow, that sounds cool) So i have to save the money somewhere... the hardware only has to live for a year (longer is nice of course), and the sql server won't be hit too hard: i guess the average server will only see it as a cough once in a while. But i do want the machine to be a bit performant: if it does get some data, it must be a bit responsive. So my question is were can i leave out the expensive parts: is 2 GB enough, or must i take 4GB, is an average processor enough or should it be a top of the bill? Is Sql server a large resource user or is a simple desktop pc good enough? It wil run on win2008 by the way.

    Read the article

  • Connecting 2 different subnet masks

    - by Jonathan
    I'm no network genius, but I have managed to get most things running. I get confused about subnets and gateways though. We have an office server connected to around 20 PC's that all communicate fine. We have just gotten a cutting machine that won't connect to our network. The server has DHCP, but that fails on the cutting machine, so I've been trying to set the IP manually. Server details are as follows: IP: 10.1.1.12 SUBNET: 255.255.255.0 GATEWAY: 10.1.1.1 Internet connection is via the modem which is 10.1.1.1 An office PC is ussually set up through DHCP and has the following settings: IP: 10.1.1.36 SUBNET: 255.255.255.0 GATEWAY: 10.1.1.1 PRIMARY DNS: 10.1.1.12 Cutting Machine computer has 2 network ports. 1 is specifically for the communication between the PC and the cutting machine. It's details must be as follows: IP: 10.100.100.2 SUBNET: 255.255.255.252 GATEWAY: BLANK The other network port need to connect to the server. I was told that the IP and SUBNET need to be as follows: IP: 10.100.100.1 SUBNET: 255.255.255.252 GATEWAY: ?? How can I connect this port to the server and/or the internet. If anyone can offer assistance, it would really be appreaciated.

    Read the article

  • Website Use Monitoring for 3 People

    - by linkedlinked
    I work in an IT startup with 2 partners, and I'm the programmer/IT guy -- in other words, the work horse. To make a long story short, I'm doing most of the work right now, while they spend all day on Facebook. That's OK, because they're paying my salary, but if the project fails, I'm sure they'll blame me for it (I'm doing my best to make sure that doesn't happen!), and I want some sort of recourse. I already have an app that blocks time-wasters on my local PC, and keeps logs of when the app is enabled (so I can say "I had Facebook blocked from 9am-5pm today.") Is there any way I can get a brief summary of the most heavily visited sites, split up by client PC? At the end of the month, I want to be able to say "You both load Facebook, on average, every 10 minutes. You spend hours a day on Youtube, and haven't opened up our bugtracker in weeks" and maybe have a nifty chart or graph to match it. We have a crappy D-Link router, and no IT budget. They are both on Windows Vista, I run Ubuntu Linux. I don't want to install any monitoring software on their PC, but I'm totally fine with, say, routing all the network traffic through my machine. I guess I can think of lots of ways to accomplish this (telnet into JSSH and list open tabs? log all the DNS requests, per-domain? even thinking of setting up a webcam on my desk and just keeping 5-minute snapshots...), I just don't really know where to start. Any advice is appreciated, thanks!

    Read the article

  • Problems with "Read Only" on a Samba share from Windows machines

    - by fistameeny
    Hi, We have a Ubuntu 10.04 Server that has a bunch of Samba shares on it that Windows workstations connect to. Each Windows workstation has a valid username/password to access the shares, which have restricted access governed by Samba. The problem we are experiencing is that Samba doesn't seem to be able to mimic the Windows way of handling "Read Only" attributes. Say I have two users, UserA and UserB, both a group called Staff - UserA creates a file that is readable/writeable by the group (ie. chmod rwxrwx---). If UserA then sets the "Read Only" flag, this changes the permissions to r-xr-x--- (i.e. no write for anyone). As UserB is in the same group as UserA, they should be able to remove the "Read Only" permission - however, they can't as Samba won't allow it. Is there a way to force Samba to allow users within the same group to remove the "Read Only" from a file not created by them? Edit: The Samba smb.conf is as follows: The share is defined in the smb.conf as: [global] log file = /var/log/samba/log.%m passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . obey pam restrictions = yes map to guest = bad user encrypt passwords = true passwd program = /usr/bin/passwd %u passdb backend = tdbsam dns proxy = no netbios name = ubsrv server string = ubsrv unix password sync = yes os level = 20 syslog = 0 usershare allow guests = yes panic action = /usr/share/samba/panic-action %d max log size = 1000 pam password change = yes workgroup = workgroup [Projects] valid users = @Staff writeable = yes user = @Staff create mode = 0777 path = /srv/samba/Projects directory mode = 0777 store dos attributes = Yes The folder itself looks like this: ls -l /srv/samba/ drwxrwxrwx 2 nobody Staff 4096 2010-11-04 10:09 Projects Thanks in advance, Matt

    Read the article

  • mysql.sock problem on Mac OS X, all Zend products

    - by Michael Stelly
    Hi folks. I posted this on the Zend forum, but I'm hoping I can get a speedier reply here. I've tried every solution provided on this forum with no luck. When I restart mysql, everything appears ok. sudo /usr/local/zend/bin/zendctl.sh restart Password: /usr/local/zend/bin/apachectl stop [OK] /usr/local/zend/bin/apachectl start [OK] Stopping Zend Server GUI [Lighttpd] [OK] spawn-fcgi: child spawned successfully: PID: 7943 Starting Zend Server GUI [Lighttpd] [OK] Stopping Java bridge [OK] Starting Java bridge [OK] Shutting down MySQL . SUCCESS! Starting MySQL . SUCCESS! Pinging locahost is also OK and resolve dns to IP. ping localhost PING localhost (127.0.0.1): 56 data bytes 64 bytes from 127.0.0.1: icmp_seq=0 ttl=64 time=0.048 ms 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.064 ms 64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=0.066 ms 64 bytes from 127.0.0.1: icmp_seq=3 ttl=64 time=0.076 ms 64 bytes from 127.0.0.1: icmp_seq=4 ttl=64 time=0.064 ms But when I attempt to access the local url for my app, I get the dreaded: Message: SQLSTATE[HY000] [2002] Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2). This is a show-stopper for me. I appreciate any assistance. Thank you.

    Read the article

  • DAS vs SAN storage for serving 2 to 4 nodes

    - by Luke404
    We currently have 4 Linux nodes with local storage, arranged in two active/passive pairs with storage mirrored using DRBD, running virtual machines (actually using Xen Hypervisor) for typical hosting workloads (mail, web, a couple VPS, etc.). We're approaching the (presumed) maximum IOPS of those servers, and we're planning to migrate to an external storage solution with two active nodes, with capacity for up to four active nodes. Since we're an all-Dell shop I've done some research and found the MD3200 / MD3200i products should be the ones we're looking for. We are pretty sure we won't be attaching more than 4 hosts on a single storage and I'm wondering if there is any clear advantage for one or the other. In theory I should be able to attach 4 SAS hosts to a single MD3200 (single links on a single controller MD3200, or dual redundant SAS links from each host to a dual-controller MD3200), or 4 iSCSI hosts to a single MD3200i (directly on its 4 GigE ports without any switch, again with dual links for the dual controller option). Both setups should let us implement live VM migration since all hosts can access all the LUNs at the same time, and also some shared filesystem like GFS2 or OCFS2. Also, both setups should allow full redundancy of the whole system (assuming dual controllers in the storage). One difference I can see is that the DAS solution is actually limited to 4 hosts while the iSCSI one should be able to grow to more hosts (adding two GigE switches to the mix). One point for the iSCSI solution is that it would allow us to start out with our current nodes and upgrade them at a later time (we can't add other SAS controllers, but they already have 4 GigE ports each). With the right (iSCSI|SAS) controllers I should be able to connect diskless nodes and boot them off the external storage which I think is a good thing (get rid of any local storage). On the other hand, I would have thought the SAS one to be cheaper but it seems like an MD3200 actually costs a little less than an MD3200i (?) (please note: I've used Dell gear in my examples since that's what we're looking for but I assume the same goes with other vendors) I would like to know if my assumptions above are correct, and if I'm missing any important difference between the two setups.

    Read the article

  • Can't connect remotely to Windows Server 2008 R2

    - by JohnyD
    I have a new Dell R710 server running Windows Server 2008 R2. I one of it's 4 nic's set up and the rest are not being used. I have successfully given it an ip address, network mask, and dns servers. I can ping and resolve this machine from anywhere else in the network. However, when I try to connect to it via RDP it does several things: 1) it might just outright refuse me with the message, "This computer can't connect to the remote computer. Try connecting again." 2) it might connect me and let me chose the account I would like to log on as... but when you select an account then you receive the same message as in #1 3) it might actually allow you to connect but only for about 1 minute and then you receive the same message and it closes your session. I have configured the firewall service to allow for RDP over the domain network connection. This didn't have any noticible effect. I have now disabled the firewall for all 3 networks and have even stopped the Windows Firewall service. I am still having the same issue. I am new to Server 2008 R2 and things are very different. Please give me any advice you can on how to resolve this issue and/or any other gotchas that are sure to come my way. The 2003 - 2008 learning curve seems steep. Thanks

    Read the article

  • RRAS Problem routing to central site from RRAS server only?

    - by TomTom
    Given is an office connected to headquarters using a RRAS bridge (2 virtual machines using RRAS to route between the two networks). Naming: The office is A, the RRAS on A is a-lnk. THe headquartters is B, b-lnk the RRAS machine there. The VPN works perfectly - machines can ping and work between the sites. Domain controllers on both ends replicating, DFS working, remote desktop working. All in all... everything is fine. EXCEPT: a-lnk itself can not reach any machine in B. This would normally not be troublesome (noone ever does anything on a-lnk), but there are two exceptions: * a-lnk is supposed to get it's license from a KMS in B, so not being able to reach B means it is not prolonging. * a-lnk is supposed to pull updates from a WSUS in B - and not being able to reach B means - no updates. Given that thigns work (and security is a minor issue - A-lnk is not reachable from the internet as it is behing a NAT hardware anyway) this got not handled for months. I just wan to get this item ticked off now. Anyone an idea what this is? It definitely is not a "dns does not work" or "routing in general is bad" item, as any computer in A can connect to any computer in B, and the other way arount - only the RRAS computer itself seems to do something really awkward. Platform for both: 2008 R2 standard.

    Read the article

  • Problems with "Read Only" on a Samba share from Windows machines

    - by fistameeny
    We have a Ubuntu 10.04 Server that has a bunch of Samba shares on it that Windows workstations connect to. Each Windows workstation has a valid username/password to access the shares, which have restricted access governed by Samba. The problem we are experiencing is that Samba doesn't seem to be able to mimic the Windows way of handling "Read Only" attributes. Say I have two users, UserA and UserB, both a group called Staff - UserA creates a file that is readable/writeable by the group (ie. chmod rwxrwx---). If UserA then sets the "Read Only" flag, this changes the permissions to r-xr-x--- (i.e. no write for anyone). As UserB is in the same group as UserA, they should be able to remove the "Read Only" permission - however, they can't as Samba won't allow it. Is there a way to force Samba to allow users within the same group to remove the "Read Only" from a file not created by them? Edit: The Samba smb.conf is as follows: The share is defined in the smb.conf as: [global] log file = /var/log/samba/log.%m passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . obey pam restrictions = yes map to guest = bad user encrypt passwords = true passwd program = /usr/bin/passwd %u passdb backend = tdbsam dns proxy = no netbios name = ubsrv server string = ubsrv unix password sync = yes os level = 20 syslog = 0 usershare allow guests = yes panic action = /usr/share/samba/panic-action %d max log size = 1000 pam password change = yes workgroup = workgroup [Projects] valid users = @Staff writeable = yes user = @Staff create mode = 0777 path = /srv/samba/Projects directory mode = 0777 store dos attributes = Yes The folder itself looks like this: ls -l /srv/samba/ drwxrwxrwx 2 nobody Staff 4096 2010-11-04 10:09 Projects Thanks in advance, Matt

    Read the article

  • How to route public static IP to a virtual machine on a vmware ESXi host?

    - by Kevin Southworth
    I have 5 static IPs from my ISP (Comcast) and I have a physical machine with VMware ESXi 4.0 on it that is hosting multiple virtual machines. Right now I am just using the default vmware virtual network (vswitch0) with DHCP from the Comcast IP Gateway Router and everything is working fine. Each virtual machine can access the internet, etc. One of my virtual machines is a webserver (Windows Server 2008) and I want to assign it to 1 of my 5 static IPs so it's accessible from the public internet, while leaving the other VMs on the internal LAN still using DHCP. If I just plug my laptop directly into the Comcast IP Gateway (it has 4 ports on the back) and assign my laptop a Static IP using the windows networking dialogs, then I can hit my laptop from the public internet and it works great. However, if I try to do the same steps to set a static IP config on my Windows Server 2008 VM, it does not work. The VM cannot access the internet (open Firefox and try to visit google.com), and I cannnot see the VM from the public internet either. I'm assuming I'm missing something in the ESXi config somewhere, but I'm pretty new to ESXi and I'm not sure how to configure it to work this way.

    Read the article

  • 553-Message filtered - HELO Name issue?

    - by g18c
    I am having major issues sending from my SBS2011 machine to Message labs server-13.tower-134.messagelabs.com #553-Message filtered. Refer to the Troubleshooting page at 553-http://www.symanteccloud.com/troubleshooting for more 553 information. (#5.7.1) ## I have changed the IP and hostnames from the below. I am not on any IP or domain blacklists. I have setup SPF (which includes mailchimp servers): v=spf1 mx a ip4:95.74.157.22/32 a:remote.mydomain.com include:servers.mcsv.net ~all I am sure i have setup my HELO names correctly under the Exchange Management console, sending a test email from the SBS server and looking at the header shows the following: X-Orig-To: [email protected] X-Originating-Ip: [95.74.157.22] Received: from [95.74.157.22] ([95.74.157.22:52194] helo=remote.mydomain.com) by smtp50.gate.ord1a.rsapps.net (envelope-from <[email protected]>) (ecelerity 2.2.3.49 r(42060/42061)) with ESMTP id 11/90-10010-E529C835; Mon, 02 Jun 2014 11:04:09 -0400 Received: from MYSBSSVR.mydomain.local ([fe80::3159:95a6:23f:1bef]) by MYSBSSVR.mydomain.local ([fe80::3159:95a6:23f:1bef%10]) with mapi id 14.01.0438.000; Mon, 2 Jun 2014 19:03:56 +0400 Is is the main helo name there OK and do i need to worry about the second Received block where the MYSBSVR.mydomain.local is mentioned? I have asked the ISP to set the reverse DNS for my IP to remote.mydomain.com but they have instead put remote.MYDOMAIN.com - would this case cause HELO lookups to classify this as not matching? Anything else I can do to find out why i am being filtered?

    Read the article

  • Error setting up Data Protection Manager 2010 Agents / Network "Unauthenticated" in network settings

    - by Bowsa
    I'm not sure if the two are connected but i suspect they are. Basically I'm tring to setup Data Protection Manager 2010 on a fresh install of Server 2008 R2 in a SBS 2003 domain. Everything went fine until trying to install agents across the network. Upon clicking add, i get the following error message: Unable to connect to the Active Directory Domain Services Database. Make sure that the DPM server is a member of a domain and that the controller is running. Also verify that there is network connectivity between the DPM server and the domain controller. ID: 7 As usual (worryingly) the MSDN support for 2010 products is nearly non existant, clicking the error ID simply gives a page not found error. So after 2 days of Googling and trying various fixes (DNS settings, adding permissions to AD objects, rejoining the domain and many more) I thought I'd ask here in the hope that someone out there may have had this issue before. Any help greatly appreciated! Some further info: Firewalls are disabled on the Server 2008, SBS, and client machines. Manually installing and adding the client in also fails, as the DPM server tries to contact the DC first. Edit: I tried creating a new protection group instead, and it gives a different error upon adding the machines: Following machines are not found in AD: COMPUTERNAME.COMPANYNAME.LOCAL Is there a certain directory structure it follows in AD?

    Read the article

  • How do I prevent or override a group policy on Windows 7?

    - by Kevin
    A few months ago my company was purchased by a large corporation. We recently switched our network over to the large corporate network which has more restrictions requirements. One of these is the requirement to use a proxy server for Internet traffic. However, some of our internal servers are not recognized by the corporate DNS, so we need to provide the fully qualified domain name. For W7, we make changes to the Internet Properties for IE8 and Chrome to include our domain name as an exception to the proxy server (e.g., *.foobar.com). The problem is that a group policy that does not include our domain name is continually pushed out to my systems throughout the day. This requires me to make the appropriate changes to the Internet Properties several times a day in order to access our internal servers. Is there a way that I can prevent the group policy from being pushed to my systems or detect when the group policy is pushed and override it? I am an administrator on all of my systems. I do have Firefox installed which is not subject to the same group policy push, but I need to have IE8 and Chrome working.

    Read the article

  • Set postfix to send email but not to receive them

    - by CodeShining
    I'm using Google Apps to handle personal email addresses for my domain name, and I set up the DNS as Google suggests. All works fine. Now since I need a SMTP to send emails from my e-commerce I installed Postfix on the server. It works fine when I send emails to any email address but it doesn't send to the same domain name, so let's say my domain is example.com, I set postfix using example.com, if I try to reset a password using [email protected] postfix doesn't send and instead reports on the mail.log Sep 20 01:09:52 ip-10-54-26-162 postfix/pickup[6809]: B09A3415D8: uid=33 from=<www-data> Sep 20 01:09:52 ip-10-54-26-162 postfix/cleanup[6854]: B09A3415D8: message-id=<20120920010952.B09A3415D8@ip-10-54-26-162.eu-west-1.compute.internal> Sep 20 01:09:52 ip-10-54-26-162 postfix/qmgr[30978]: B09A3415D8: from=<[email protected]>, size=4234, nrcpt=1 (queue active) Sep 20 01:09:52 ip-10-54-26-162 postfix/local[6856]: B09A3415D8: to=<[email protected]>, relay=local, delay=0.01, delays=0.01/0/0/0, dsn=5.1.1, status=bounced (unknown user: "myaccount") Of course it cannot find a local user "myaccount" since that account is on Google Apps... How can I tell Postfix to send the email and do not search for a local user?

    Read the article

< Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >