Search Results

Search found 8605 results on 345 pages for 'general dynamics'.

Page 306/345 | < Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >

• Managing hosts and iptables in scalable architecture

  - by hakunin

  Let's say I have a load balancer in front of 3 app servers. Let's say I also have these services available at certain IPs: Postgres server Redis server ElasticSearch server Memcached server 1 Memcached server 2 Memcached server 3 So that's 6 nodes at 6 different IP addresses. Naturally, every one of my 3 app servers needs to talk to these 6 servers above. Then, to make it a bit funkier, I also have 3 worker servers. And each worker also talks to the above 6 servers, but thankfully workers and apps never need to talk to each other. Now's the kicker. Everything is on Digital Ocean VPS. What that means is: you have no private network, no private IPs. You only have separate, random IP address on each machine. You can't mask them or anything. So in order to build a secure environment I would have to configure some iptables. For example: Open app servers be accessed by load balancer server Open redis, ES, PG, and each memcached servers to be accessed by each app's IP and each worker's IP This means that every time I add an app or worker I have to also reconfigure iptables in those above 6 servers to welcome the new app or worker. Is there a way to simplify this type of setup? I was thinking — what if there was a gateway machine between apps/workers and the above 6 machines. This way all the interaction would always happen via the gateway server, and when I add a new app or worker I wouldn't need to teach the 6 servers to let it in. If I went this route, then I'd hope a small 512mb server could handle that perhaps, and there wouldn't be almost any overhead. Or would there? Please help with best way to handle this situation. I would appreciate an answer as concrete as possible. I don't think this is too specific, because this general architecture is very common, and Digital Ocean is becoming increasingly popular. A concrete solution here would be much appreciated by many.

  Read the article

• SMBfs mounting OK, listing OK, Read KO, smbclient OK

  - by Kwaio

  I've tried to make the title the most meaningfull I could but it still looks ugly. The premises. We are using RHEL3-U8 as OS on most servers here, don't ask me why or suggest to upgrade, it's not on today's schedule. That means kernel used is 2.4.21 I have no access to the remote server, but I know it is a netApp NAS rack. $> smbclient --version Version 3.0.9-1.3E.9 Here is the /etc/fstab line : //NASHOSTNAME/share /mnt/mydir smbfs ro,uid=123,gid=123,workgroup=XXXX,credentials=/somefile 0 0 Here is the following mount output line //NASHOSTNAME/share on /mnt/mydir type smbfs (0) The symptoms. I can list the share without problems, even cd in there. The issue appears if I try to read any file : $> cat /mnt/mydir/fileX.txt cat: /mnt/mydir/fileX.txt: Input/output error In the system logs (/var/log/kernel for example) the following errors appear. Jul 30 15:40:02 hostname kernel: smb_errno: class ERRHRD, code 31 from command 0x2 Jul 30 15:40:02 hostname kernel: smb_errno: class ERRHRD, code 31 from command 0x2 Jul 30 15:40:02 hostname kernel: smb_open: fileX.txt open failed, result=-5 Jul 30 15:40:02 hostname kernel: smb_errno: class ERRHRD, code 31 from command 0x2 Jul 30 15:40:02 hostname kernel: smb_errno: class ERRHRD, code 31 from command 0x2 Jul 30 15:40:02 hostname kernel: smb_open: fileX.txt open failed, result=-5 Jul 30 15:40:02 hostname kernel: smb_readpage_sync: fileX.txt open failed, error=-5 The ERRHRD code 0x001F error is "General hardware failure" although it seems samba sometimes uses it for a different purpose, see http://www.ubiqx.org/cifs/SMB.html [Strange behaviour Alert] Additionnal informations : There is another SMB mountpoint on the system pointing to a (linux) host using samba and this one works. What I have tried. I have tried adding debug=4 to the mounting options and remounting the share and the logs still look the same. I have tried to mount the share with smbclient and I am able to fetch files with the get command. Both targets are in the same subnet, so network problem should be out, even if the LAN goes through a VPN with optimizers, MTU has already been decreased to 1450. I can also mount the share through NFS but then the files are all root.root 700 and I need to read them with another user...

  Read the article

• Why would a process monitoring script use exit 1; on finding no problems?

  - by user568458

  General question: On a Linux (Centos) server, if a process monitoring script run by cron is set to close with exit 1; rather than exit 0; on finding that everything is okay and that no action is needed, is that a mistake? Or are there legitimate reasons for calling exit 1; instead of exit 0; on the "Everything's fine, no action needed" condition? exit 0; on finding no problems seems to me to be more appropriate. But maybe there's something I'm not aware of. For example, maybe there's something specific to Cron? Or maybe there's a convention in process monitoring scripts that 'failure' means 'this script failed to need to fix a problem' (rather than what I would expect which is that exit 1; would mean 'the process being monitored has failed'?) My specific case: I'm looking at a process monitoring script written by my web hosting company. By process monitoring script, I mean a script executed by Cron on a regular basis that checks if an important system process is running, and if it isn't running, takes actions such as mailing an administrator or restarting the process. Here's the (generalised) structure of their script, for a service running on port 8080 (in this case, Apache Tomcat): SERVICE=$(/usr/sbin/lsof -i tcp:8080 | wc -l); if [ $SERVICE != 0 ]; then exit 1; else #take action fi Seems simple enough even for someone with limited knowledge like me, except the exit 1; part seems odd. As I understand it, exit 0; closes a program and signifies to the parent that executed the program that everything is fine, exit n; where n0 and n<127 signifies that there has been some kind of error or problem. Here, their script seems to go against that rule - it calls exit 1; in the condition where everything is fine, and doesn't exit after taking remedial action in the problem condition. To me, this looks like a mistake - but my experience in this area is limited. Are there cases where calling exit 1; in the "Everything's fine, no action needed" condition is more appropriate than calling exit 0;? Or is it a mistake? Wider context is pretty simple. It's a Centos VPS, running Plesk. The script is being called by Cron via Plesk's "Scheduled tasks" Cron manager. There's no custom layer between Cron and this script that would respond in an unusual way to the exit call. It's a fairly average, almost out-of-the box Plesk-managed Centos VPS (in so far as there is such a thing). The process being monitored by this script is Apache Tomcat.

  Read the article

• What router hardware or software should be used when multiple public IPs are routed into the same LAN?

  - by lcbrevard

  I am looking for recommendations to replace a set of consumer grade (Linksys, Netgear, Belkin) routers with something that can handle more traffic while routing more than one static public IP into the same LAN address space. We have a block of static public IPs, 5 usable, with Comcast Business. Currently four of them are in use for: General office access Web server Mail and DNS servers Download and backup web server for separate business All systems (a mixture of physical and virtual) are in the same LAN address space (10.x.y.0/24) to enable easy access between them inside the office. There are 30 or more systems in use depending on which virtual machines are currently active. We have a mixture of Windows, Linux, FreeBSD, and Solaris. Currently a separate consumer grade router is used for each of the four static addresses, with its WAN address set to the specific static address and a different gateway address for each: uses 10.x.y.1 - various ports are forwarded to various LAN IPs on systems with gateway 10.x.y.1 uses 10.x.y.254 - port 80 is forwarded to a server with gateway 10.x.y.254 uses 10.x.y.253 - ports for mail and dns are forwarded to a server with gateway 10.x.y.253 uses 10.x.y.252 - ports as needed are forwarded to server with gateway 10.x.y.252 Only router 1. is allowed to serve DHCP and address reservation based on the MAC is used for most of the internal "server" IP addresses so they are at fixed values. [Some are set static due to limitations in the address reservation capabilities of router 1.] And, yes, this really does work! But... I am looking for: better DHCP with more capable address reservation higher capacity so I don't have to periodically power cycle the routers One obvious improvement would be to have a real DHCP server and not use a consumer grade router for that purpose. I am torn between buying a "professional" router such as Cisco or Juniper or Sonic Wall verus learning to configure some spare hardware to perform this function. The price goes up extremely rapidly with capabilities for commercial routers! Worse, some routers require licensing based on the number of clients - a disaster in our environment with so many virtual machines. Sorry for such a long posting but I am getting tired of having to power cycle routers and deal with shifting IP addresses afterwards!

  Read the article

• Reviews Cheyney Group Marketing: What accounting softwares are available in the market for small businesses?

  - by user225556

  Accounting is the language of business, and good accounting software can save you hundreds of hours at the business equivalent of Berlitz. There's no substitute for an accounting pro who knows the ins and outs of tax law, but today's desktop packages can help you with everything from routine bookkeeping to payroll, taxes, and planning. Each package also produces files that you can hand off to an accountant as needed. Small-business managers have more accounting software options than ever, including subscription Web-based options that don't require their users to install or update software. Many businesses, however--including those that need to track large inventories or client databases, and those that prefer not to entrust their data to the cloud--may be happier with a desktop tool. We looked at three general-purpose, small-business accounting packages: Acclivity AccountEdgePro 2012 (both the product and the company were previously called MYOB), Intuit QuickBooks Premier 2012, and Sage's Sage 50 Complete 2013 (the successor to Peachtree Complete). All three packages offer a solid array of tools for tracking income and expenses, invoicing, managing payroll, and creating reports. These full-featured and highly mature programs don't come cheap. Acclivity AccountEdge Pro, at $299, is the least expensive; and prices climb if you opt to use common time-saving add-ons such as payroll services, or if you add licenses for multiple user accounts. All three are solid on the basics, but they have distinct differences in style and focus. The more you know about your accounting requirements, the more closely you'll want to look at the software you're thinking of buying. Sage 50 Complete should appeal most to people who understand the fine points of accounting and can use the product's many customization features (especially for businesses that manage inventory). QuickBooks works hard to appeal to newbies who need only the basics and might be intimidated by the level of detail and technical language exposed in the other two packages. At the same time, it also has a slew of third-party add-ons that meet specific needs and greatly expand its capabilities. AccountEdge Pro balances accessibility with a strong feature set at an affordable price. It's especially suitable for businesses that need to provide simultaneous access to multiple users.

  Read the article

• Cooling Server Rack with Water? Sensible? Reuse energy for small installation?

  - by TomTom

  First - this is not a shopping question, this is not so much about concrete prices but about general feasibility. Makes no sense to get looking fo ra manufacturer it the approach is bad. I am moving my company to new Offices in September, and among them we will expand and consolidate our number crunch cluster. It is so far in a data center. I have a nice room in the basement prepared now. I think about cooling. We will likely run up a power usage of around 10kw by end of the year. That is a LOT of stuff, and cooling will be expensive. I am located in south Poland, close to the German border. This is an area where water is available for relatively cheap price - "wasting water" is not a concern here. My situation is thus a lot different for example than in Spain ;) Physics tells me that to heat 1 liter of water by 1 degree I use 1 Calorie (1KCal), and a kwh power is (and we can assume 100% efficiency - water heaters are pretty efficient) 750 Calories. That means that 1 KWH is 750 liter by 1 degree. 10kw and a 20 degree heat would mean that per hour I need 375 liters. That is 6.25 liters per minute and not WHAT much ;) We talk 270 cubic meters here. Even in summer, the significant underground pipes really cool down the water a LOT more ;) Question: This such an approach feasible? Anyone done that? We talk of a 10kw installation for now. Is it feasible to reuse that heat? The alternative is a decent cooling system that WILL use around 2.5kwh for running. Dropping the water would basically (a) get me a quite cold input compared to the outside air even in summer (I.e. a lower temperature medium to drop the heat in) and (b) replace the need to actually have the outside cooling (which may b problematic - if the air is 22 degree, that is a LOT to fight off, but OTOH the water will be quite cold). I also would possibly save the investment for the outside part of the cooling circuit. Now, second question - is there a feasible way to heat a house with that? ;) After all, brutally speaking, it is a LOT of energy in that water ;) If it is a bad idea, I stop here - if it is not, I start looking for suppliers. Maybe my math is wrong?

  Read the article

• Reviews Cheyney Group Marketing: What accounting softwares are available in the market for small businesses?

  - by user224313

  Accounting is the language of business, and good accounting software can save you hundreds of hours at the business equivalent of Berlitz. There's no substitute for an accounting pro who knows the ins and outs of tax law, but today's desktop packages can help you with everything from routine bookkeeping to payroll, taxes, and planning. Each package also produces files that you can hand off to an accountant as needed. Small-business managers have more accounting software options than ever, including subscription Web-based options that don't require their users to install or update software. Many businesses, however--including those that need to track large inventories or client databases, and those that prefer not to entrust their data to the cloud--may be happier with a desktop tool. We looked at three general-purpose, small-business accounting packages: Acclivity AccountEdgePro 2012 (both the product and the company were previously called MYOB), Intuit QuickBooks Premier 2012, and Sage's Sage 50 Complete 2013 (the successor to Peachtree Complete). All three packages offer a solid array of tools for tracking income and expenses, invoicing, managing payroll, and creating reports. These full-featured and highly mature programs don't come cheap. Acclivity AccountEdge Pro, at $299, is the least expensive; and prices climb if you opt to use common time-saving add-ons such as payroll services, or if you add licenses for multiple user accounts. All three are solid on the basics, but they have distinct differences in style and focus. The more you know about your accounting requirements, the more closely you'll want to look at the software you're thinking of buying. Sage 50 Complete should appeal most to people who understand the fine points of accounting and can use the product's many customization features (especially for businesses that manage inventory). QuickBooks works hard to appeal to newbies who need only the basics and might be intimidated by the level of detail and technical language exposed in the other two packages. At the same time, it also has a slew of third-party add-ons that meet specific needs and greatly expand its capabilities. AccountEdge Pro balances accessibility with a strong feature set at an affordable price. It's especially suitable for businesses that need to provide simultaneous access to multiple users.

  Read the article

• [CentOS 4.8] nslookup resolves domains to IPs, but I can't get a response to pings to external servers

  - by Beco

  I have a fresh install of CentOS 4.8 running on an internal development server. I haven't done anything to it besides setting up sudoers and SSH. I can SSH into the server and from there resolve domains to IPs and ping internal servers, but for some reason I don't get any response from pinging external servers. The software firewall is disabled, and the problem is present with both static and DHCP-assigned network configurations. The network domain controller is a Windows Server 2003 box. $ nslookup google.com Server: 10.254.2.5 Address: 10.254.2.5#53 Non-authoritative answer: Name: google.com Address: 74.125.47.147 Name: google.com Address: 74.125.47.99 <etc...> 10.254.2.5 is the Win2K3 server. $ ping google.com PING google.com (74.125.47.106) 56(84) bytes of data. It just hangs here indefinitely. $ cat /etc/resolv.conf ; generated by /sbin/dhclient-script search <...snip...>.local nameserver 10.254.2.5 nameserver 10.254.2.124 10.254.2.124 is the backup DC server, which is currently off and tombstoned by this point. The snipped section is our company name. # ifconfig eth0 Link encap:Ethernet HWaddr <snip> inet addr:10.254.2.101 Bcast:10.254.2.255 Mask:255.255.255.0 inet6 addr: <snip>/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:80066 errors:0 dropped:0 overruns:0 frame:0 TX packets:4421 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7810133 (7.4 MiB) TX bytes:590550 (576.7 KiB) Interrupt:225 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:32 errors:0 dropped:0 overruns:0 frame:0 TX packets:32 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8104 (7.9 KiB) TX bytes:8104 (7.9 KiB) # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.254.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 10.254.2.5 0.0.0.0 UG 0 0 0 eth0 And, for good measure, a snapshot of the current ethernet config via the system-config-network GUI. Edit: I don't yet have enough rep to post images, so here's a link. Sorry! system-config-network snapshot I'm pretty green when it comes to setting up *nix dev servers and network configuration in general, so please let me know if I've left out critical information, or posted information I shouldn't have posted. Thanks!

  Read the article

• Box2d Cocos2d circle crash on contact with ground

  - by Oliver Cooper

  this is my first question here so sorry if I do something wrong or this is too long. I have been reading this tutorial by Ray Wenderlich, I have modified it so it is flatter and gradually goes down hill. Basically I have a ball roll down a bumpy hill, but at the moment the ball only drops from about 100 pixels above. When ever the touch the app crashes (the app is a Mac Cocos2d Box2d app). The ball code is this: CGSize winSize = [CCDirector sharedDirector].winSize; self.oeva = [CCSprite spriteWithTexture:[[CCTextureCache sharedTextureCache] addImage:@"Ball.png"]rect:CGRectMake(0, 0, 64, 64)]; _oeva.position = CGPointMake(68, winSize.height/2); [self addChild:_oeva z:1]; b2BodyDef oevaBodyDef; oevaBodyDef.type = b2_dynamicBody; oevaBodyDef.position.Set(68/PTM_RATIO, (winSize.height/2)/PTM_RATIO); // oevaBodyDef.userData = _oeva; _oevaBody = world->CreateBody(&oevaBodyDef); b2BodyDef bodyDef; bodyDef.type = b2_dynamicBody; bodyDef.position.Set(60/PTM_RATIO, 400/PTM_RATIO); bodyDef.userData = _oeva; b2Body *body = world->CreateBody(&bodyDef); // Define another box shape for our dynamic body. b2CircleShape dynamicBox; dynamicBox.m_radius = 70/PTM_RATIO;//These are mid points for our 1m box // Define the dynamic body fixture. b2FixtureDef fixtureDef; fixtureDef.shape = &dynamicBox; fixtureDef.density = 1.0f; fixtureDef.friction = 0.3f; body->CreateFixture(&fixtureDef); That works fine. This is the terrain code, this also works fine: -(void)generateTerrainWithWorld: (b2World *) inputWorld: (int) hillSize;{ b2BodyDef bd; bd.position.Set(0, 0); body = inputWorld->CreateBody(&bd); b2PolygonShape shape; b2FixtureDef fixtureDef; currentSlope = 0; CGSize winSize = [CCDirector sharedDirector].winSize; float xf = 0; float yf = (arc4random() % 10)+winSize.height/3; int x = 200; for(int i = 0; i < maxHillPoints; ++i) { hillPoints[i] = CGPointMake(xf, yf); xf = xf+ (arc4random() % x/2)+x/2; yf = ((arc4random() % 30)+winSize.height/3)-currentSlope; currentSlope +=10; } int hSegments; for (int i=0; i<maxHillPoints-1; i++) { CGPoint p0 = hillPoints[i-1]; CGPoint p1 = hillPoints[i]; hSegments = floorf((p1.x-p0.x)/cosineSegmentWidth); float dx = (p1.x - p0.x) / hSegments; float da = M_PI / hSegments; float ymid = (p0.y + p1.y) / 2; float ampl = (p0.y - p1.y) / 2; CGPoint pt0, pt1; pt0 = p0; for (int j = 0; j < hSegments+1; ++j) { pt1.x = p0.x + j*dx; pt1.y = ymid + ampl * cosf(da*j); fullHillPoints[fullHillPointsCount++] = pt1; pt0 = pt1; } } b2Vec2 p1v, p2v; for (int i=0; i<fullHillPointsCount-1; i++) { p1v = b2Vec2(fullHillPoints[i].x/PTM_RATIO,fullHillPoints[i].y/PTM_RATIO); p2v = b2Vec2(fullHillPoints[i+1].x/PTM_RATIO,fullHillPoints[i+1].y/PTM_RATIO); shape.SetAsEdge(p1v, p2v); body->CreateFixture(&shape, 0); } } However when ever the two collide the app crashes. The crash error is: Thread 6 CVDisplayLink: Program received signal: "SIGABRT" The error occurs on line 96 of b2ContactSolver.cpp: b2Assert(kNormal > b2_epsilon); The error log is: Assertion failed: (kNormal 1.19209290e-7F), function b2ContactSolver, file /Users/coooli01/Documents/Xcode Projects/Cocos2d/Hill Slide/Hill Slide/libs/Box2D/Dynamics/Contacts/b2ContactSolver.cpp, line 96. Sorry if I rambled on for too long, i've been stuck on this for ages.

  Read the article

• Scrum Master Stephen Forte Teaches Agile Development, Silverlight and BI at GIDS 2010

  - by rajesh ahuja

  Great Indian Developer Summit 2010 – Gold Standard for India's Software Developer Ecosystem Bangalore, March 25, 2010: The author of several books on application and database development including Programming SQL Server 2008 and certified Scrum Master Stephen Forte is coming this summer to India's biggest summit for the developer ecosystem - Great Indian Developer Summit. At the summit, Stephen will conduct a workshop guaranteed to give attendees a jump start in taking a certified scrum master exam. Scrum, one of the most popular Agile project management and development methods, which is starting to be adopted at major corporations and on very large projects. After an introduction to the basics of Scrum like project planning and estimation, the Scrum Master, team, product owner and burn down, and of course the daily Scrum, Stephen will show many real world applications of the methodology drawn from his own experience as a Scrum Master. Negotiating with the business, estimation and team dynamics are all discussed as well as how to use Scrum in small organizations, large enterprise environments and consulting environments. Stephen will also discuss using Scrum with virtual teams and an off-shoring environment. He will then take a look at the tools we will use for Agile development, including planning poker, unit testing, and much more. On 20th April at the GIDS.NET Conference, Stephen will also conduct a series of sessions on Microsoft computing technologies. He will teach how to build data driven, n-tier Rich Internet Applications (RIA) with Silverlight 4.0. Line of business applications (LOB) in Silverlight 4.0 are easy by tapping the power of WCF RIA Services, the Silverlight Toolkit, and elevated out of browser support. Stephen's demo centric session will walk you through an example of building a LOB application with Silverlight 4.0. See how Silverlight and WCF RIA Services support domain logic, services, data binding, validation, server based paging, authentication, authorization and much more. Silverlight 4.0 means business. Silverlight runs C# and Visual Basic code, and so it seems natural that a business application might share some code between the Silverlight client and its ASP.NET Web server. You may want to run some code client-side for interactivity, but re-run that code on the server for security or reliability. This is possible, and there are several techniques you can use to accomplish this goal. In Stephen's second talk learn about the various techniques and their pros and cons. Some techniques work better in C#, others in VB. Still others are simpler with a little extra tooling or code-generation. Any serious Silverlight business application will almost certainly face this issue, and this session gets you going fast. In the third talk, Stephen will explain how to properly architect and deploy a BI application using a mix of some exciting new tools and some old familiar ones. He will start with a traditional relational transaction centric database (OLTP) and explore ways to build a data warehouse (OLAP), looking at the star and snowflake schemas. Next he will look at the process of extraction, transformation, and loading (ETL) your OLTP data into your data warehouse. Different techniques for ETL will be described and the various tradeoffs will be discussed. Then he will look at using the warehouse for reporting, drill down, and data analysis in Microsoft Excel's PowerPivot 2010. The session will round off by showing how to properly build a cube and build a data analysis application on top of that cube, and conclude by looking at some tools to help with the data visualization process. Every year, GIDS is a game changer for several thousands of IT professionals, providing them with a competitive edge over their peers, enlightening them with bleeding-edge information most useful in their daily jobs, helping them network with world-class experts and visionaries, and providing them with a much needed thrust in their careers. Attend Great Indian Developer Summit to gain the information, education and solutions you seek. From post-conference workshops, breakout sessions by expert instructors, keynotes by industry heavyweights, enhanced networking opportunities, and more. About Great Indian Developer Summit Great Indian Developer Summit is the gold standard for India's software developer ecosystem for gaining exposure to and evaluating new projects, tools, services, platforms, languages, software and standards. Packed with premium knowledge, action plans and advise from been-there-done-it veterans, creators, and visionaries, the 2010 edition of Great Indian Developer Summit features focused sessions, case studies, workshops and power panels that will transform you into a force to reckon with. Featuring 3 co-located conferences: GIDS.NET, GIDS.Web, GIDS.Java and an exclusive day of in-depth tutorials - GIDS.Workshops, from 20 April to 24 April at the IISc campus in Bangalore. At GIDS you'll participate in hundreds of sessions encompassing the full range of Microsoft computing, Java, Agile, RIA, Rich Web, open source/standards, languages, frameworks and platforms, practical tutorials that deep dive into technical skill and best practices, inspirational keynote presentations, an Expo Hall featuring dozens of the latest projects and products activities, engaging networking events, and the interact with the best and brightest of speakers from around the world. For further information on GIDS 2010, please visit the summit on the web http://www.developersummit.com/ A Saltmarch Media Press Release E: [email protected] Ph: +91 80 4005 1000

  Read the article

• XNA Notes 009

  - by George Clingerman

  This past week the MVPs (myself included) were on Microsoft campus for the MVP summit. So I apologize in advance if you did something cool or heard of something cool happening with XNA and XBLIGs and it’s not in my notes. I did my best to stay on top of things, but honestly this community is fast and furious with what it’s doing and creating. I really can’t keep up and that’s fantastic! But here’s what I *did* notice while I was there on Microsoft Campus (and I did make sure to point out to the XNA team several of these very cool happenings while I had their ears). Time Critical XNA News: The XNA team wants you to know that Dream Build Play registration is now open! http://blogs.msdn.com/b/xna/archive/2011/02/28/registration-now-open-for-dream-build-play-2011-challenge.aspx Join the XNA-UK create on March 24, 2011 at the Microsoft Tech Days Conference http://xna-uk.net/blogs/darkgenesis/archive/2011/02/27/join-the-xna-uk-crew-at-the-microsoft-tech-days-conference-on-24th-march-2011.aspx XNA Team: Shawn Hargreaves shares one of the coolest things that’s happened in the XNA community http://blogs.msdn.com/b/shawnhar/archive/2011/03/02/xbox-indies-pivot-view.aspx Nick Gravelyn continues his unique marketing/work prioritization strategy as he tries to get to 5,000 Pixel Man users before he makes Pixel Man 2 (and he’s almost there!) http://nickgravelyn.com/pixelman2/ XNA MVPs: A lot of the XNA MVPs were at the Microsoft MVP Summit 2011. Due to NDAs, most things can’t be shared, but I’m sure if you’re curious you could ask them about the general vibe and feeling they got from the team and the future of XNA/XBLIG and more. Catalin Zima and team release the free WP7 game Chickens Can Dream http://twitter.com/CatalinZima/statuses/41174062923390976 http://www.amusedsloth.com/2011/02/chickens-can-dream-is-live/ Charles Humphrey (NemoKrad) posts his March talk source and PowerPoint http://xna-uk.net/blogs/randomchaos/archive/2011/03/04/march-2011-talk-post-processing-framework.aspx XNA Developers: Michael B. McLaughlin posts about ANTS Memory Profile and creates a CheckMemoryAllocationGame sample (extremely useful if you’re looking to see how much memory some operation allocates!) http://geekswithblogs.net/mikebmcl/archive/2011/02/28/ants-memory-profiler-7.0-review.aspx http://geekswithblogs.net/mikebmcl/archive/2011/03/01/checkmemoryallocationgame-sample.aspx Andy Schatz (2009 IGF winner for Monaco) talking XNA at GDC 2011 http://www.gamasutra.com/view/news/33313/GDC_2011_Andy_Schatz_Ill_Make_My_Last_Game_When_I_Die.php Xbox LIVE Indie Games (XBLIG): Clover: A Curious Tale by BinaryTweed is coming as a Deal of the Week during St. Patricks Day http://majornelson.com/archive/2011/03/03/comingsoontothexboxlivemarketplacemarchthird.aspx Ska Studios away at GDC but still very post happy as always http://www.ska-studios.com/2011/03/02/swamped-picture-pack/ http://www.ska-studios.com/2011/02/28/the-february-showcase/ http://www.ska-studios.com/2011/02/25/good-morning-gato-51-smelling-the-roses/ Just Press Start interviews Matthew Mikuszewski of Darkwind Media about Blocks Indie http://justpressstart.net/?p=516 Gamergeddon Xbox Indie Game Round Up - February 27th http://www.gamergeddon.com/2011/02/27/xbox-indie-game-round-up-february-27th/ http://www.gamergeddon.com/category/xbox-360/indie-games/ GameMarx does a round up of all the Xbox Live Indie Game podcasts that are currently available http://www.gamemarx.com/news/2011/02/27/xbox-live-indie-game-podcasts.aspx GameMarx episode 11 http://www.gamemarx.com/video/the-show/26/ep-11-february-25-2011.aspx In perhaps what I feel is the most exciting news I’ve heard all week, Michael C. Neel (ViNull of GameMarx fame) re-launch XboxIndies.com! http://www.gamemarx.com/news/2011/03/01/the-relaunch-of-xboxindies-com.aspx http://xboxindies.com/ Armless Octopus shares a little of what they heard from Luke Schneider of Radiangames during his GDC 2011 talk http://www.armlessoctopus.com/2011/03/02/gdc-2011-luke-schneider-offers-insight-into-radiangames-success/ VVGindiecast Episode 1 with guests Derek Strickland(Mr_Deeke), Kris Steele(Kriswd40 from FunInfused Games) and Dave Voyles(From armlessoctopus.com) http://vvgtv.com/2011/02/25/vvgindiecast-xblig-podcast/ If you’re doing Xbox LIVE Indie Game Reviews get in touch with XboxIndies.com to get into their aggregated feed http://forums.create.msdn.com/forums/p/76931/467189.aspx#467189 B.U.T.T.O.N and Flotilla represented XNA very well at the Independent Games Festival (are there any more games entered that were created using XNA? Stand up and be heard!) http://www.igf.com/php-bin/entry2011.php?id=374 Armless Ocotopus interview at GDC 2011 with Soulcaster creator Ian Stocker http://www.armlessoctopus.com/2011/03/04/gdc-2011-interview-with-soulcaster-creator-ian-stocker/ MommysBestGames gets a nod in the DarkBasic newsletter where it features the Explosionade Editor (just do a search for Explosionade to get to the interesting bits!) http://www.thegamecreators.com/pages/newsletters/newsletter_issue_98.html You may be hearing the cries of FortressCraft (coming soon to XBLIG) being so wrong for stealing the idea from MineCraft. But did you know the the game MineCraft started from was an XNA game called Infiniminer? XNA is getting it’s fingers into EVERYTHING! http://www.minecraftwiki.net/wiki/Infiniminer XNA Development: TorqueX is NOT dead thanks to the tremendous efforts of the XNA Community working on the CEV (special thanks to @PinoEire for all his hard work on making that happen!) http://www.garagegames.com/community/blogs/view/20878 http://torquecev.com/ Dave Henry has posted XNA 3.x adding platformer start kit to the network game state management on his new site http://twitter.com/#!/mort8088/status/43407715908853760 http://mort8088.com/2011/03/03/xna-3-x-adding-platformer-starter-kit-to-network-game-state-management/ Mark Bamford releases XNAViewer 4.0, great for running XNA games inside of a Windows Form (for building level editors, etc.) http://twitter.com/#!/xzodia04/status/43466830412660736 http://xnaviewer.codeplex.com/ Unit testing an XNA game with Resharper and NUnit http://smnbss.wordpress.com/2011/02/28/planetx-unit-testing-an-xna-game-with-resharper-and-nunit-wp7-xbox-xna/ XNA for Silverlight developers: Part 5 - Input (touch + gestures) http://ht.ly/1bxwUE Mike McLaughlin shares a link he stumbled across for those looking to understand vector and matrix math http://twitter.com/#!/mikebmcl/status/42587074725036032 http://chortle.ccsu.edu/VectorLessons/vectorIndex.html DigitalRune Resources Pooling in XNA (Part 1) http://www.digitalrune.com/Support/Blog/tabid/719/EntryId/84/DigitalRune-Helper-Library-Resource-Pooling-in-XNA-Part-1.aspx JohnK “bobthecbuilder” released a new SunBurn Update that lowers the requirements for Windows Games http://twitter.com/#!/bobthecbuilder/status/43457306578522112 http://www.synapsegaming.com/blogs/johnk/archive/2011/03/03/sunburn-update-windows-redistributable.aspx Quick update on the Indiefreaks Game Framework v0.4 development status http://indiefreaks.com/2011/03/04/quick-update-on-igf-v0-4-development/

  Read the article

• Windows Azure: Announcing Support for Windows Server 2012 R2 + Some Nice Price Cuts

  - by ScottGu

  Today we released some great updates to Windows Azure: Virtual Machines: Support for Windows Server 2012 R2 Cloud Services: Support for Windows Server 2012 R2 and .NET 4.5.1 Windows Azure Pack: Use Windows Azure features on-premises using Windows Server 2012 R2 Price Cuts: Up to 22% Price Reduction on Memory-Intensive Instances Below are more details about each of the improvements: Virtual Machines: Support for Windows Server 2012 R2 This morning we announced the release of Windows Server 2012 R2 – which is a fantastic update to Windows Server and includes a ton of great enhancements. This morning we are also excited to announce that the general availability image of Windows Server 2012 RC is now supported on Windows Azure.  Windows Azure is the first cloud provider to offer the final release of Windows Server 2012 R2, and it is incredibly easy to launch your own Windows Server 2012 R2 instance with it. To create a new Windows Server 2012 R2 instance simply choose New->Compute->Virtual Machine within the Windows Azure Management Portal.  You can select the “Windows Server 2012 R2” image and create a new Virtual Machine using the “Quick Create” option: Or alternatively click the “From Gallery” option if you want to customize even more configuration options (endpoints, remote powershell, availability set, etc): Creating and instantiating a new Virtual Machine on Windows Azure is very fast.  In fact, the Windows Server 2012 R2 image now deploys and runs 30% faster than previous versions of Windows Server. Once the VM is deployed you can drill into it to track its health and manage its settings: Clicking the “Connect” button allows you to remote desktop into the VM – at which point you can customize and manage it as a full administrator however you want: If you haven’t tried Windows Server 2012 R2 yet – give it a try with Windows Azure.  There is no easier way to get an instance of it up and running! Cloud Services: Support for using Windows Server 2012 R2 with Web and Worker Roles Today’s Windows Azure release also allows you to now use Windows Server 2012 R2 and .NET 4.5.1 within Web and Worker Roles within Cloud Service based applications.  Enabling this is easy.  You can configure existing existing Cloud Service application to use Windows Server 2012 R2 by updating your Cloud Service Configuration File (.cscfg) to use the new “OS Family 4” setting: Or alternatively you can use the Windows Azure Management Portal to update cloud services that are already deployed on Windows Azure.  Simply choose the configure tab on them and select Windows Server 2012 R2 in the Operating System Family dropdown: The approaches above enable you to immediately take advantage of Windows Server 2012 R2 and .NET 4.5.1 and all the great features they provide. Windows Azure Pack: Use Windows Azure features on Windows Server 2012 R2 Today we also made generally available the Windows Azure Pack, which is a free download that enables you to run Windows Azure Technology within your own datacenter, an on-premises private cloud environment, or with one of our service provider/hosting partners who run Windows Server. Windows Azure Pack enables you to use a management portal that has the exact same UI as the Windows Azure Management Portal, and within which you can create and manage Virtual Machines, Web Sites, and Service Bus – all of which can run on Windows Server and System Center.  The services provided with the Windows Azure Pack are consistent with the services offered within our Windows Azure public cloud offering.  This consistency enables organizations and developers to build applications and solutions that can run in any hosting environment – and which use the same development and management approach.  The end result is an offering with incredible flexibility. You can learn more about Windows Azure Pack and download/deploy it today here. Price Cuts: Up to 22% Reduction on Memory Intensive Instances Today we are also reducing prices by up to 22% on our memory-intensive VM instances (specifically our A5, A6, and A7 instances).  These price reductions apply to both Windows and Linux VM instances, as well as for Cloud Service based applications: These price reductions will take effect in November, and will enable you to run applications that demand larger memory (such as SharePoint, Databases, in-memory analytics, etc) even more cost effectively. Summary Today’s release enables you to start using Windows Server 2012 R2 within Windows Azure immediately, and take advantage of our Cloud OS vision both within our datacenters – and using the Windows Azure Pack within both your existing datacenters and those of our partners. If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using all of the above features today.  Then visit the Windows Azure Developer Center to learn more about how to build apps with it. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

  Read the article

• Creating packages in code – Execute SQL Task

  The Execute SQL Task is for obvious reasons very well used, so I thought if you are building packages in code the chances are you will be using it. Using the task basic features of the task are quite straightforward, add the task and set some properties, just like any other. When you start interacting with variables though it can be a little harder to grasp so these samples should see you through. Some of these more advanced features are explained in much more detail in our ever popular post The Execute SQL Task, here I’ll just be showing you how to implement them in code. The abbreviated code blocks below demonstrate the different features of the task. The complete code has been encapsulated into a sample class which you can download (ExecSqlPackage.cs). Each feature described has its own method in the sample class which is mentioned after the code block. This first sample just shows adding the task, setting the basic properties for a connection and of course an SQL statement. Package package = new Package(); // Add the SQL OLE-DB connection ConnectionManager sqlConnection = AddSqlConnection(package, "localhost", "master"); // Add the SQL Task package.Executables.Add("STOCK:SQLTask"); // Get the task host wrapper TaskHost taskHost = package.Executables[0] as TaskHost; // Set required properties taskHost.Properties["Connection"].SetValue(taskHost, sqlConnection.ID); taskHost.Properties["SqlStatementSource"].SetValue(taskHost, "SELECT * FROM sysobjects"); For the full version of this code, see the CreatePackage method in the sample class. The AddSqlConnection method is a helper method that adds an OLE-DB connection to the package, it is of course in the sample class file too. Returning a single value with a Result Set The following sample takes a different approach, getting a reference to the ExecuteSQLTask object task itself, rather than just using the non-specific TaskHost as above. Whilst it means we need to add an extra reference to our project (Microsoft.SqlServer.SQLTask) it makes coding much easier as we have compile time validation of any property and types we use. For the more complex properties that is very valuable and saves a lot of time during development. The query has also been changed to return a single value, one row and one column. The sample shows how we can return that value into a variable, which we also add to our package in the code. To do this manually you would set the Result Set property on the General page to Single Row and map the variable on the Result Set page in the editor. Package package = new Package(); // Add the SQL OLE-DB connection ConnectionManager sqlConnection = AddSqlConnection(package, "localhost", "master"); // Add the SQL Task package.Executables.Add("STOCK:SQLTask"); // Get the task host wrapper TaskHost taskHost = package.Executables[0] as TaskHost; // Add variable to hold result value package.Variables.Add("Variable", false, "User", 0); // Get the task object ExecuteSQLTask task = taskHost.InnerObject as ExecuteSQLTask; // Set core properties task.Connection = sqlConnection.Name; task.SqlStatementSource = "SELECT id FROM sysobjects WHERE name = 'sysrowsets'"; // Set single row result set task.ResultSetType = ResultSetType.ResultSetType_SingleRow; // Add result set binding, map the id column to variable task.ResultSetBindings.Add(); IDTSResultBinding resultBinding = task.ResultSetBindings.GetBinding(0); resultBinding.ResultName = "id"; resultBinding.DtsVariableName = "User::Variable"; For the full version of this code, see the CreatePackageResultVariable method in the sample class. The other types of Result Set behaviour are just a variation on this theme, set the property and map the result binding as required. Parameter Mapping for SQL Statements This final example uses a parameterised SQL statement, with the coming from a variable. The syntax varies slightly between connection types, as explained in the Working with Parameters and Return Codes in the Execute SQL Taskhelp topic, but OLE-DB is the most commonly used, for which a question mark is the parameter value placeholder. Package package = new Package(); // Add the SQL OLE-DB connection ConnectionManager sqlConnection = AddSqlConnection(package, ".", "master"); // Add the SQL Task package.Executables.Add("STOCK:SQLTask"); // Get the task host wrapper TaskHost taskHost = package.Executables[0] as TaskHost; // Get the task object ExecuteSQLTask task = taskHost.InnerObject as ExecuteSQLTask; // Set core properties task.Connection = sqlConnection.Name; task.SqlStatementSource = "SELECT id FROM sysobjects WHERE name = ?"; // Add variable to hold parameter value package.Variables.Add("Variable", false, "User", "sysrowsets"); // Add input parameter binding task.ParameterBindings.Add(); IDTSParameterBinding parameterBinding = task.ParameterBindings.GetBinding(0); parameterBinding.DtsVariableName = "User::Variable"; parameterBinding.ParameterDirection = ParameterDirections.Input; parameterBinding.DataType = (int)OleDBDataTypes.VARCHAR; parameterBinding.ParameterName = "0"; parameterBinding.ParameterSize = 255; For the full version of this code, see the CreatePackageParameterVariable method in the sample class. You’ll notice the data type has to be specified for the parameter IDTSParameterBinding .DataType Property, and these type codes are connection specific too. My enumeration I wrote several years ago is shown below was probably done by reverse engineering a package and also the API header file, but I recently found a very handy post that covers more connections as well for exactly this, Setting the DataType of IDTSParameterBinding objects (Execute SQL Task). /// <summary> /// Enumeration of OLE-DB types, used when mapping OLE-DB parameters. /// </summary> private enum OleDBDataTypes { BYTE = 0x11, CURRENCY = 6, DATE = 7, DB_VARNUMERIC = 0x8b, DBDATE = 0x85, DBTIME = 0x86, DBTIMESTAMP = 0x87, DECIMAL = 14, DOUBLE = 5, FILETIME = 0x40, FLOAT = 4, GUID = 0x48, LARGE_INTEGER = 20, LONG = 3, NULL = 1, NUMERIC = 0x83, NVARCHAR = 130, SHORT = 2, SIGNEDCHAR = 0x10, ULARGE_INTEGER = 0x15, ULONG = 0x13, USHORT = 0x12, VARCHAR = 0x81, VARIANT_BOOL = 11 } Download Sample code ExecSqlPackage.cs (10KB)

  Read the article

• Parallelism in .NET – Part 12, More on Task Decomposition

  - by Reed

  Many tasks can be decomposed using a Data Decomposition approach, but often, this is not appropriate.  Frequently, decomposing the problem into distinctive tasks that must be performed is a more natural abstraction. However, as I mentioned in Part 1, Task Decomposition tends to be a bit more difficult than data decomposition, and can require a bit more effort.  Before we being parallelizing our algorithm based on the tasks being performed, we need to decompose our problem, and take special care of certain considerations such as ordering and grouping of tasks. Up to this point in this series, I’ve focused on parallelization techniques which are most appropriate when a problem space can be decomposed by data.  Using PLINQ and the Parallel class, I’ve shown how problem spaces where there is a collection of data, and each element needs to be processed, can potentially be parallelized. However, there are many other routines where this is not appropriate.  Often, instead of working on a collection of data, there is a single piece of data which must be processed using an algorithm or series of algorithms.  Here, there is no collection of data, but there may still be opportunities for parallelism. As I mentioned before, in cases like this, the approach is to look at your overall routine, and decompose your problem space based on tasks.  The idea here is to look for discrete “tasks,” individual pieces of work which can be conceptually thought of as a single operation. Let’s revisit the example I used in Part 1, an application startup path.  Say we want our program, at startup, to do a bunch of individual actions, or “tasks”.  The following is our list of duties we must perform right at startup: Display a splash screen Request a license from our license manager Check for an update to the software from our web server If an update is available, download it Setup our menu structure based on our current license Open and display our main, welcome Window Hide the splash screen The first step in Task Decomposition is breaking up the problem space into discrete tasks. This, naturally, can be abstracted as seven discrete tasks.  In the serial version of our program, if we were to diagram this, the general process would appear as: These tasks, obviously, provide some opportunities for parallelism.  Before we can parallelize this routine, we need to analyze these tasks, and find any dependencies between tasks.  In this case, our dependencies include: The splash screen must be displayed first, and as quickly as possible. We can’t download an update before we see whether one exists. Our menu structure depends on our license, so we must check for the license before setting up the menus. Since our welcome screen will notify the user of an update, we can’t show it until we’ve downloaded the update. Since our welcome screen includes menus that are customized based off the licensing, we can’t display it until we’ve received a license. We can’t hide the splash until our welcome screen is displayed. By listing our dependencies, we start to see the natural ordering that must occur for the tasks to be processed correctly. The second step in Task Decomposition is determining the dependencies between tasks, and ordering tasks based on their dependencies. Looking at these tasks, and looking at all the dependencies, we quickly see that even a simple decomposition such as this one can get quite complicated.  In order to simplify the problem of defining the dependencies, it’s often a useful practice to group our tasks into larger, discrete tasks.  The goal when grouping tasks is that you want to make each task “group” have as few dependencies as possible to other tasks or groups, and then work out the dependencies within that group.  Typically, this works best when any external dependency is based on the “last” task within the group when it’s ordered, although that is not a firm requirement.  This process is often called Grouping Tasks.  In our case, we can easily group together tasks, effectively turning this into four discrete task groups: 1. Show our splash screen – This needs to be left as its own task.  First, multiple things depend on this task, mainly because we want this to start before any other action, and start as quickly as possible. 2. Check for Update and Download the Update if it Exists - These two tasks logically group together.  We know we only download an update if the update exists, so that naturally follows.  This task has one dependency as an input, and other tasks only rely on the final task within this group. 3. Request a License, and then Setup the Menus – Here, we can group these two tasks together.  Although we mentioned that our welcome screen depends on the license returned, it also depends on setting up the menu, which is the final task here.  Setting up our menus cannot happen until after our license is requested.  By grouping these together, we further reduce our problem space. 4. Display welcome and hide splash - Finally, we can display our welcome window and hide our splash screen.  This task group depends on all three previous task groups – it cannot happen until all three of the previous groups have completed. By grouping the tasks together, we reduce our problem space, and can naturally see a pattern for how this process can be parallelized.  The diagram below shows one approach: The orange boxes show each task group, with each task represented within.  We can, now, effectively take these tasks, and run a large portion of this process in parallel, including the portions which may be the most time consuming.  We’ve now created two parallel paths which our process execution can follow, hopefully speeding up the application startup time dramatically. The main point to remember here is that, when decomposing your problem space by tasks, you need to: Define each discrete action as an individual Task Discover dependencies between your tasks Group tasks based on their dependencies Order the tasks and groups of tasks

  Read the article

• Parallelism in .NET – Part 1, Decomposition

  - by Reed

  The first step in designing any parallelized system is Decomposition.  Decomposition is nothing more than taking a problem space and breaking it into discrete parts.  When we want to work in parallel, we need to have at least two separate things that we are trying to run.  We do this by taking our problem and decomposing it into parts. There are two common abstractions that are useful when discussing parallel decomposition: Data Decomposition and Task Decomposition.  These two abstractions allow us to think about our problem in a way that helps leads us to correct decision making in terms of the algorithms we’ll use to parallelize our routine. To start, I will make a couple of minor points. I’d like to stress that Decomposition has nothing to do with specific algorithms or techniques.  It’s about how you approach and think about the problem, not how you solve the problem using a specific tool, technique, or library.  Decomposing the problem is about constructing the appropriate mental model: once this is done, you can choose the appropriate design and tools, which is a subject for future posts. Decomposition, being unrelated to tools or specific techniques, is not specific to .NET in any way.  This should be the first step to parallelizing a problem, and is valid using any framework, language, or toolset.  However, this gives us a starting point – without a proper understanding of decomposition, it is difficult to understand the proper usage of specific classes and tools within the .NET framework. Data Decomposition is often the simpler abstraction to use when trying to parallelize a routine.  In order to decompose our problem domain by data, we take our entire set of data and break it into smaller, discrete portions, or chunks.  We then work on each chunk in the data set in parallel. This is particularly useful if we can process each element of data independently of the rest of the data.  In a situation like this, there are some wonderfully simple techniques we can use to take advantage of our data.  By decomposing our domain by data, we can very simply parallelize our routines.  In general, we, as developers, should be always searching for data that can be decomposed. Finding data to decompose if fairly simple, in many instances.  Data decomposition is typically used with collections of data.  Any time you have a collection of items, and you’re going to perform work on or with each of the items, you potentially have a situation where parallelism can be exploited.  This is fairly easy to do in practice: look for iteration statements in your code, such as for and foreach. Granted, every for loop is not a candidate to be parallelized.  If the collection is being modified as it’s iterated, or the processing of elements depends on other elements, the iteration block may need to be processed in serial.  However, if this is not the case, data decomposition may be possible. Let’s look at one example of how we might use data decomposition.  Suppose we were working with an image, and we were applying a simple contrast stretching filter.  When we go to apply the filter, once we know the minimum and maximum values, we can apply this to each pixel independently of the other pixels.  This means that we can easily decompose this problem based off data – we will do the same operation, in parallel, on individual chunks of data (each pixel). Task Decomposition, on the other hand, is focused on the individual tasks that need to be performed instead of focusing on the data.  In order to decompose our problem domain by tasks, we need to think about our algorithm in terms of discrete operations, or tasks, which can then later be parallelized. Task decomposition, in practice, can be a bit more tricky than data decomposition.  Here, we need to look at what our algorithm actually does, and how it performs its actions.  Once we have all of the basic steps taken into account, we can try to analyze them and determine whether there are any constraints in terms of shared data or ordering.  There are no simple things to look for in terms of finding tasks we can decompose for parallelism; every algorithm is unique in terms of its tasks, so every algorithm will have unique opportunities for task decomposition. For example, say we want our software to perform some customized actions on startup, prior to showing our main screen.  Perhaps we want to check for proper licensing, notify the user if the license is not valid, and also check for updates to the program.  Once we verify the license, and that there are no updates, we’ll start normally.  In this case, we can decompose this problem into tasks – we have a few tasks, but there are at least two discrete, independent tasks (check licensing, check for updates) which we can perform in parallel.  Once those are completed, we will continue on with our other tasks. One final note – Data Decomposition and Task Decomposition are not mutually exclusive.  Often, you’ll mix the two approaches while trying to parallelize a single routine.  It’s possible to decompose your problem based off data, then further decompose the processing of each element of data based on tasks.  This just provides a framework for thinking about our algorithms, and for discussing the problem.

  Read the article

• Creating packages in code – Execute SQL Task

  The Execute SQL Task is for obvious reasons very well used, so I thought if you are building packages in code the chances are you will be using it. Using the task basic features of the task are quite straightforward, add the task and set some properties, just like any other. When you start interacting with variables though it can be a little harder to grasp so these samples should see you through. Some of these more advanced features are explained in much more detail in our ever popular post The Execute SQL Task, here I’ll just be showing you how to implement them in code. The abbreviated code blocks below demonstrate the different features of the task. The complete code has been encapsulated into a sample class which you can download (ExecSqlPackage.cs). Each feature described has its own method in the sample class which is mentioned after the code block. This first sample just shows adding the task, setting the basic properties for a connection and of course an SQL statement. Package package = new Package(); // Add the SQL OLE-DB connection ConnectionManager sqlConnection = AddSqlConnection(package, "localhost", "master"); // Add the SQL Task package.Executables.Add("STOCK:SQLTask"); // Get the task host wrapper TaskHost taskHost = package.Executables[0] as TaskHost; // Set required properties taskHost.Properties["Connection"].SetValue(taskHost, sqlConnection.ID); taskHost.Properties["SqlStatementSource"].SetValue(taskHost, "SELECT * FROM sysobjects"); For the full version of this code, see the CreatePackage method in the sample class. The AddSqlConnection method is a helper method that adds an OLE-DB connection to the package, it is of course in the sample class file too. Returning a single value with a Result Set The following sample takes a different approach, getting a reference to the ExecuteSQLTask object task itself, rather than just using the non-specific TaskHost as above. Whilst it means we need to add an extra reference to our project (Microsoft.SqlServer.SQLTask) it makes coding much easier as we have compile time validation of any property and types we use. For the more complex properties that is very valuable and saves a lot of time during development. The query has also been changed to return a single value, one row and one column. The sample shows how we can return that value into a variable, which we also add to our package in the code. To do this manually you would set the Result Set property on the General page to Single Row and map the variable on the Result Set page in the editor. Package package = new Package(); // Add the SQL OLE-DB connection ConnectionManager sqlConnection = AddSqlConnection(package, "localhost", "master"); // Add the SQL Task package.Executables.Add("STOCK:SQLTask"); // Get the task host wrapper TaskHost taskHost = package.Executables[0] as TaskHost; // Add variable to hold result value package.Variables.Add("Variable", false, "User", 0); // Get the task object ExecuteSQLTask task = taskHost.InnerObject as ExecuteSQLTask; // Set core properties task.Connection = sqlConnection.Name; task.SqlStatementSource = "SELECT id FROM sysobjects WHERE name = 'sysrowsets'"; // Set single row result set task.ResultSetType = ResultSetType.ResultSetType_SingleRow; // Add result set binding, map the id column to variable task.ResultSetBindings.Add(); IDTSResultBinding resultBinding = task.ResultSetBindings.GetBinding(0); resultBinding.ResultName = "id"; resultBinding.DtsVariableName = "User::Variable"; For the full version of this code, see the CreatePackageResultVariable method in the sample class. The other types of Result Set behaviour are just a variation on this theme, set the property and map the result binding as required. Parameter Mapping for SQL Statements This final example uses a parameterised SQL statement, with the coming from a variable. The syntax varies slightly between connection types, as explained in the Working with Parameters and Return Codes in the Execute SQL Taskhelp topic, but OLE-DB is the most commonly used, for which a question mark is the parameter value placeholder. Package package = new Package(); // Add the SQL OLE-DB connection ConnectionManager sqlConnection = AddSqlConnection(package, ".", "master"); // Add the SQL Task package.Executables.Add("STOCK:SQLTask"); // Get the task host wrapper TaskHost taskHost = package.Executables[0] as TaskHost; // Get the task object ExecuteSQLTask task = taskHost.InnerObject as ExecuteSQLTask; // Set core properties task.Connection = sqlConnection.Name; task.SqlStatementSource = "SELECT id FROM sysobjects WHERE name = ?"; // Add variable to hold parameter value package.Variables.Add("Variable", false, "User", "sysrowsets"); // Add input parameter binding task.ParameterBindings.Add(); IDTSParameterBinding parameterBinding = task.ParameterBindings.GetBinding(0); parameterBinding.DtsVariableName = "User::Variable"; parameterBinding.ParameterDirection = ParameterDirections.Input; parameterBinding.DataType = (int)OleDBDataTypes.VARCHAR; parameterBinding.ParameterName = "0"; parameterBinding.ParameterSize = 255; For the full version of this code, see the CreatePackageParameterVariable method in the sample class. You’ll notice the data type has to be specified for the parameter IDTSParameterBinding .DataType Property, and these type codes are connection specific too. My enumeration I wrote several years ago is shown below was probably done by reverse engineering a package and also the API header file, but I recently found a very handy post that covers more connections as well for exactly this, Setting the DataType of IDTSParameterBinding objects (Execute SQL Task). /// <summary> /// Enumeration of OLE-DB types, used when mapping OLE-DB parameters. /// </summary> private enum OleDBDataTypes { BYTE = 0x11, CURRENCY = 6, DATE = 7, DB_VARNUMERIC = 0x8b, DBDATE = 0x85, DBTIME = 0x86, DBTIMESTAMP = 0x87, DECIMAL = 14, DOUBLE = 5, FILETIME = 0x40, FLOAT = 4, GUID = 0x48, LARGE_INTEGER = 20, LONG = 3, NULL = 1, NUMERIC = 0x83, NVARCHAR = 130, SHORT = 2, SIGNEDCHAR = 0x10, ULARGE_INTEGER = 0x15, ULONG = 0x13, USHORT = 0x12, VARCHAR = 0x81, VARIANT_BOOL = 11 } Download Sample code ExecSqlPackage.cs (10KB)

  Read the article

• Kaiden and the Arachnoid Cyst

  - by Martin Hinshelwood

  Some of you may remember when my son Kaiden was born I posted pictures of him and his sister. Kaiden is now 15 months old and is progressing perfectly in every area except that and we had been worried that he was not walking yet. We were only really concerned as his sister was walking at 8 months. Figure: Kai as his usual self   Jadie and I were concerned over that and that he had a rather large head (noggin) so we talked to various GP’s and our health visitor who immediately dismissed our concerns every time. That was until about two months ago when we happened to get a GP whose daughter had Hyper Mobility and she recognised the symptoms immediately. We were referred to the Southbank clinic who were lovely and the paediatrician confirmed that he had Hyper Mobility after testing all of his faculties. This just means that his joints are overly mobile and would need a little physiotherapy to help him out. At the end the paediatrician remarked offhand that he has a rather large head and wanted to measure it. Sure enough he was a good margin above the highest percentile mark for his height and weight. The paediatrician showed the measurements to a paediatric consultant who, as a precautionary measure, referred us for an MRI at Yorkhill Children's hospital. Now, Yorkhill has always been fantastic to us, and this was no exception. You know we have NEVER had a correct diagnosis for the kids (with the exception of the above) from a GP and indeed twice have been proscribed incorrect medication that made the kids sicker! We now always go strait to Yorkhill to save them having to fix GP mistakes as well. Monday 24th May, 7pm The scan went fantastically, with Kaiden sleeping in the MRI machine for all but 5 minutes at the end where he waited patiently for it to finish. We were not expecting anything to be wrong as this was just a precautionary scan to make sure that nothing in his head was affecting his gross motor skills. After the scan we were told to expect a call towards the end of the week… Tuesday 25th May, 12pm The very next day we got a call from Southbank who said that they has found an Arachnoid Cyst and could we come in the next day to see a Consultant and that Kai would need an operation. Wednesday 26th May, 12:30pm We went into the Southbank clinic and spoke to the paediatric consultant who assured us that it was operable but that it was taking up considerable space in Kai’s head. Cerebrospinal fluid is building up as a cyst is blocking the channels it uses to drain. Thankfully they told us that prospects were good and that Kai would expect to make a full recovery before showing us the MRI pictures. Figure: Normal brain MRI cross section. This normal scan shows the spaces in the middle of the brain that contain and produce the Cerebrospinal fluid. Figure: Normal Cerebrospinal Flow This fluid is needed by the brain but is drained in the middle down the spinal column. Figure: Kai’s cyst blocking the four channels. I do not think that I need to explain the difference between the healthy picture and Kai’s picture. However you can see in this first picture the faint outline of the cyst in the middle that is blocking the four channels from draining. After seeing the scans a Neurosurgeon has decided that he is not acute, but needs an operation to unblock the flow. Figure: OMFG! You can see in the second picture the effect of the build up of fluid. If I was not horrified by the first picture I was seriously horrified by this one. What next? Kai is not presenting the symptoms of vomiting or listlessness that would show an immediate problem and as such we will get an appointment to see the Paediatric Neurosurgeon at the Southern General hospital in about 4 weeks. This timescale is based on the Neurosurgeon seeing the scans. After that Kai will need an operation to release the pressure and either remove the cyst completely or put in a permanent shunt (tube from brain to stomach) to bypass the blockage. We have updated his notes for the referral with additional recent information on top of the scan that the consultant things will help improve the timescales, but that is just a guess.   All we can do now is wait and see, and be watchful for tell tail signs of listlessness, eye problems and vomiting that would signify a worsening of his condition.   Technorati Tags: Personal

  Read the article

• Connecting to DB2 from SSIS

  - by Christopher House

  The project I'm currently working on involves moving various pieces of data from a legacy DB2 environment to some SQL Server and flat file locations.  Most of the data flows are real time, so they were a natural fit for the client's MQSeries on their iSeries servers and BizTalk to handle the messaging.  Some of the data flows, however, are daily batch type transmissions.  For the daily batch transmissions, it was decided that we'd use SSIS to pull the data direct from DB2 to either a SQL Server or flat file.  I'm not at all an SSIS guy, I've done a bit here and there, but mainly for situations were we needed to move data from a dev environment to QA, mostly informal stuff like that.  And, as much as I'm not an SSIS guy, I'm even less a DB2/iSeries guy.  Prior to this engagement, my knowledge of DB2 was limited to the fact that it's an IBM product and that it was probably a DBMS flatform (that's what the DB in DB2 means, right?).   One of my first goals when I came onto this project was to develop of POC SSIS package to pull some data from DB2 and dump it to a flat file.  It sounded like a pretty straight forward task.  As always, the devil is in the details.  Configuring the DB2 connection manager took a bit of trial and error.  As such, I thought I'd post my experiences here in hopes that they might save someone the efforts I went through.  That being said, please keep in mind, as I pointed out, I'm not at all a DB2 guy, so my terminology and explanations may not be 100% spot on. Before you get started, you need to figure out how you're going to connect to DB2.  From the research I did, it looks like there are a few options.  IBM has both an OLE DB and .Net data provider which can be found here.  I installed their client access tools and tried to use both the .Net and OLE DB providers but I received an error message from both when attempting to connect to the iSeries that indicated I needed a license for a product called DB2 Connect.  I inquired with one of my client's iSeries resources about a license for this product and it appears they didn't have one, so that meant the IBM drivers were out.  The other option that I found quite a bit of discussion around was Microsoft's OLE DB Provider for DB2.  This driver is part of the feature pack for SQL Server 2008 Enterprise Edition and can be downloaded here. As it turns out, I already had Microsoft's driver installed on my dev VM, which stuck me as odd since I hadn't installed it.  I discovered that the driver is installed with the BizTalk adapter pack for host systems, which was also installed on my VM.  However, it looks like the version used by the adapter pack is newer than the version provided in the SQL Server feature pack.   Once you get the driver installed, create a connection manager in your package just like you normally would and select the Microsoft OLE DB Provider for DB2 from the list of available drivers. After you select the driver, you'll need to enter in your host name, login credentials and initial catalog. A couple of things to note here.  First, the Initial catalog needs to be the same as your host name.  Not sure why that is, but trust me, it just does.  Second, for credentials, in my environment, we're using what the client's iSeries people refer to as "profiles".  I guess this is similar to SQL auth in the SQL Server world.  In other words, they've given me a username and password for connecting to DB, so I've entered it here. Next, click the Data Links button.  On the Data Links screen, enter your package collection on the first tab. Package collection is one of those DB2 concepts I'm still trying to figure out.  From the little bit I've read, packages are used to control SQL compilation and each DB2 connection needs one.  The package collection, I believe, controls where your package is created.  One of the iSeries folks I've been working with told me that I should always use QGPL for my package collection, as QGPL is "general purpose" and doesn't require any additional authority. Next click the ellipsis next to the Network drop-down.  Here you'll want to enter your host name again. Again, not sure why you need to do this, but trust me, my connection wouldn't work until I entered my hostname here. Finally, go to the Advanced tab, select your DBMS platform and check Process binary as character. My environment is DB2 on the iSeries and iSeries is the replacement for AS/400, so I selected DB2/AS400 for my platform.  Process binary as character was necessary to handle some of the DB2 data types.  I had a few columns that showed all their data as "System.Byte[]".  Checking Process binary as character resolved this. At this point, you should be good to go.  You can go back to the Connection tab on the Data Links dialog to perform a couple of tests to validate your configuration.  The Test Connection button is obvious, this just verifies you can connect to the host using the configuration data you've entered.  The Packages button will attempt to connect to the host and create the packages required to execute queries. This isn't meant to be a comprehensive look SSIS and DB2, these are just some of the notes I've come up with since I've started working with DB2 and SSIS.  I'm sure as I continue developing my packages, I'll find more quirks and will post them here.

  Read the article

• How to Modify Data Security in Fusion Applications

  - by Elie Wazen

  The reference implementation in Fusion Applications is designed with built-in data security on business objects that implement the most common business practices.  For example, the “Sales Representative” job has the following two data security rules implemented on an “Opportunity” to restrict the list of Opportunities that are visible to an Sales Representative: Can view all the Opportunities where they are a member of the Opportunity Team Can view all the Opportunities where they are a resource of a territory in the Opportunity territory team While the above conditions may represent the most common access requirements of an Opportunity, some customers may have additional access constraints. This blog post explains: How to discover the data security implemented in Fusion Applications. How to customize data security Illustrative example. a.) How to discover seeded data security definitions The Security Reference Manuals explain the Function and Data Security implemented on each job role.  Security Reference Manuals are available on Oracle Enterprise Repository for Oracle Fusion Applications. The following is a snap shot of the security documented for the “Sales Representative” Job. The two data security policies define the list of Opportunities a Sales Representative can view. Here is a sample of data security policies on an Opportunity. Business Object Policy Description Policy Store Implementation Opportunity A Sales Representative can view opportunity where they are a territory resource in the opportunity territory team Role: Opportunity Territory Resource Duty Privilege: View Opportunity (Data) Resource: Opportunity A Sales Representative can view opportunity where they are an opportunity sales team member with view, edit, or full access Role: Opportunity Sales Representative Duty Privilege: View Opportunity (Data) Resource: Opportunity Description of Columns Column Name Description Policy Description Explains the data filters that are implemented as a SQL Where Clause in a Data Security Grant Policy Store Implementation Provides the implementation details of the Data Security Grant for this policy. In this example the Opportunities listed for a “Sales Representative” job role are derived from a combination of two grants defined on two separate duty roles at are inherited by the Sales Representative job role. b.) How to customize data security Requirement 1: Opportunities should be viewed only by members of the opportunity team and not by all the members of all the territories on the opportunity. Solution: Remove the role “Opportunity Territory Resource Duty” from the hierarchy of the “Sales Representative” job role. Best Practice: Do not modify the seeded role hierarchy. Create a custom “Sales Representative” job role and build the role hierarchy with the seeded duty roles. Requirement 2: Opportunities must be more restrictive based on a custom attribute that identifies if a Opportunity is confidential or not. Confidential Opportunities must be visible only the owner of the Opportunity. Solution: Modify the (2) data security policy in the above example as follows: A Sales Representative can view opportunity where they are a territory resource in the opportunity territory team and the opportunity is not confidential. Implementation of this policy is more invasive. The seeded SQL where clause of the data security grant on “Opportunity Territory Resource Duty” has to be modified and the condition that checks for the confidential flag must be added. Best Practice: Do not modify the seeded grant. Create a new grant with the modified condition. End Date the seeded grant. c.) Illustrative Example (Implementing Requirement 2) A data security policy contains the following components: Role Object Instance Set Action Of the above four components, the Role and Instance Set are the only components that are customizable. Object and Actions for that object are seed data and cannot be modified. To customize a seeded policy, “A Sales Representative can view opportunity where they are a territory resource in the opportunity territory team”, Find the seeded policy Identify the Role, Object, Instance Set and Action components of the policy Create a new custom instance set based on the seeded instance set. End Date the seeded policies Create a new data security policy with custom instance set c-1: Find the seeded policy Step 1: 1. Find the Role 2. Open 3. Find Policies Step 2: Click on the Data Security Tab Sort by “Resource Name” Find all the policies with the “Condition” as “where they are a territory resource in the opportunity territory team” In this example, we can see there are 5 policies for “Opportunity Territory Resource Duty” on Opportunity object. Step 3: Now that we know the policy details, we need to create new instance set with the custom condition. All instance sets are linked to the object. Find the object using global search option. Open it and click on “condition” tab Sort by Display name Find the Instance set Edit the instance set and copy the “SQL Predicate” to a notepad. Create a new instance set with the modified SQL Predicate from above by clicking on the icon as shown below. Step 4: End date the seeded data security policies on the duty role and create new policies with your custom instance set. Repeat the navigation in step Edit each of the 5 policies and end date them 3. Create new custom policies with the same information as the seeded policies in the “General Information”, “Roles” and “Action” tabs. 4. In the “Rules” tab, please pick the new instance set that was created in Step 3.

  Read the article

• Oracle Open World 2012: SQL Developer Recap

  - by thatjeffsmith

  Last week was the ‘big show’ in San Francisco. I was very happy to meet many of you in person. And many of you had questions – lots of questions! We had full or overflowing rooms for our sessions and hands-on-labs. The SQL Developer ‘booths’ were also slammed several times. So exciting to see so many of YOU excited about SQL Developer. It’s very cool to hear the stories of our tools saving you and your organizations so much time (and money!) Instead of doing a Day 0 – Day 9 recap, I thought I’d share with you the questions that I heard more than once. And just for giggles, I’ll throw in some answers as well So in no particular order… What’s the difference between Oracle SQL Developer & Oracle SQL Developer Data Modeler? Mathematically speaking – two words. But as far as the actual modeling features go, there’s no difference between the two applications. The same ‘code’ or features as it pertains to data modeling and design are in both tools. However, in SQL Developer you have all of the OTHER features fighting for real estate in the UI. So I have a general rule of thumb – if you spend MOST of your time in the database, use SQL Developer. And if you spend most of your time in the data model, run the separate and dedicated program, Oracle SQL Developer Data Modeler. Here’s a couple of screenshots to drive home the UI point: Oracle SQL Developer Oracle SQL Developer Data Modeler running INSIDE of SQL Developer. Notice how the Modeler menu items fold under the file menu? Oracle SQL Developer Data Modeler Easier to navigate and manipulate your models with the stand alone modeler. Just no worksheet to run your ad-hoc queries, etc. Don’t forget you can disable the Data Modeler inside of SQL Developer via the Extensions preference page. How can I model my table partitions? Partitioning is defined via the Physical model. So after you have finished your relational model, you need to generate a physical model. Oracle SQL Developer Data Modeler Physical Model and Partitioning Open the properties for your physical model table. Enable the ‘partitioned’ property. Once you do so, the ‘Partitioning’ page will activate. Lots and lots of partitioning support and options here But what about Interval Partitioning? An extension of range partitioning in 11gR2, we don’t currently support this partitioning scheme in SQL Developer. But we’re working on it! Can SQL Developer ignore column order when comparing models? Yes! After you start a model compare, one of your options is to disregard the order of an attribute or column definition. Tell SQL Developer you don’t care when your column shows up, just as long as it DOES show up. Wow, you got a lot of questions around modeling! Is that normal? Yes! While we appreciate that many folks inherit their applications and associated designs, new applications are being ‘born’ every day. Since both of our tools are free for anyone to design their new Oracle applications with, we attract a fair amount of attention I want to do a Hands On Lab. How do I get your software and instructional guides? Go here. Download VirtualBox. Then download the VB image. Import the appliance. Start it. Connect oracle/oracle on the OEL VM. Click on ‘Start Here’ in the desktop. Follow the instructions. If you need help, ask away! You went too fast in your Tips & Tricks session. Do you have cliff notes? Yes! And you’re SO close to finding them! Just go to my SQL Developer resources page. All of my tips are documented on this blog somewhere. I’ve indexed the most popular ones on the resource page. You can use the Search dialog on the right to find the rest. Or just send me a comment or question, and I’ll do my best to answer them as they come in.

  Read the article

• It’s nice to be important, but it’s more important to be nice

  - by BuckWoody

  I’ve been a little “preachy” lately, telling you that you should let people finish their sentences, and always check a problem out before you tell a user that their issue is “impossible”. Well, I’ll round that out with one more tip today. Keep in mind that all of these things are actions I’ve been guilty of, hopefully in the past. I’m kind of a “work in progress”. And yes, I know these tips are coming from someone who picks on people in presentations, but that is of course done in fun, and (hopefully) with the audience’s knowledge.   (No, this isn’t aimed at any one person or event in particular – I just see it happen a lot)   I’ve seen, unfortunately over and over, someone in authority react badly to someone who is incorrect, or at least perceived to be incorrect. This might manifest itself in a comment, post, question or whatever, but the point is that I’ve seen really intelligent people literally attack someone they view as getting something wrong. Don’t misunderstand me; if someone posts that you should always drop a production database in the middle of the day I think you should certainly speak up and mention that this might be a bad idea!  No, I’m talking about generalizations or even incorrect statements done in good faith. Let me explain with an example.   Suppose someone makes the statement: “If you don’t have enough space on your system, you can just use a DBCC command to shrink the database”. Let’s take two responses to this statement.   Response One: “That’s insane. Everyone knows that shrinking a database is a stupid idea, you’re just going to fragment your indexes all over the place.” Response Two: “That’s an interesting take – in my experience and from what I’ve read here (someurl.com) I think this might not be a universal best practice.”   Of course, both responses let the person making the statement and those reading it know that you don’t agree, and that it’s probably wrong. But the person you responded to and the general audience hearing you (or reading your response) might form two different opinions of you.   The first response says to me “this person really needs to be right, and takes arguments personally. They aren’t thinking of the other person at all, or the folks reading or hearing the exchange. They turned an incorrect technical statement into a personal attack. They haven’t left the other party any room to ‘save face’, and they have potentially turned what could be a positive learning experience for everyone into a negative. Also, they sound more than just a little arrogant.”   The second response says to me “this person has left room for everyone to save face, has presented evidence to the contrary and is thinking about moving the ball forward and getting it right rather than attacking someone for getting it wrong.” It’s the idea of questioning a statement rather than attacking a person.   Perhaps you have a different take. Maybe you think the “direct” approach is best – and maybe that’s worked for you. Something to consider is what you’ve really accomplished while using that first method. Sure, the info you provide is correct, and perhaps someone out there won’t shrink a database because of your response – but perhaps you’ve turned a lot more people off, and now they won’t listen to your other valuable information. You’ll be an expert, but another one of the nameless, arrogant jerks in technology. And I don’t think anyone likes to be thought of that way.   OK, I’ll get down off of the high-horse now. And I’ll keep the title of this entry (said to me by my grandmother when I was a little kid) in mind when I dismount. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Lubuntu 13.10 unable to connect to cups localhost:631

  - by user142139

  I am using Lubuntu 13.10 (recently upgraded) and am trying to print to a network printer (HP photosmart 7960) through my router (US Robotics 5461). My printer is connected to the router via USB cable. Normally, I would use the cups configuration interface to set up the wireless connection to the printer. I was able to use the printer through the router wirelessly, using Ubuntu 12.04. Now, with my recently upgraded Lubuntu 13.10, I am unable to get the Cups config webpage (http://localhost:631) to come up. In Chromium, I get: This web page is not available. In Firefox, I get: Unable to connect. Firefox can't establish a connection to the server at localhost:631. The CUPS config file details are below. I have this website to help with the router connections for Linux: http://www.usr.com/support/5461/5461-files/printer_installation_linux/index.html My printer's address through the router is: http://192.168.2.1:1631/printers/My_Printer Can you tell me how to fix this? Or, what to add to the cups configuration file to make this work? Please help. Thanks psychicnut CUPS CONFIG FILE DETAILS: # Show general information in error_log. LogLevel warn MaxLogSize 0 SystemGroup lpadmin Listen /var/run/cups/cups.sock Listen /var/run/cups/cups.sock Listen 192.168.2.1:1631 Browsing Off BrowseLocalProtocols dnssd DefaultAuthType Basic WebInterface Yes <Location /> Order allow,deny </Location> <Location /admin> Order allow,deny </Location> <Location /admin/conf> AuthType Default Require user @SYSTEM Order allow,deny </Location> <Policy default> JobPrivateAccess default JobPrivateValues default SubscriptionPrivateAccess default SubscriptionPrivateValues default <Limit Create-Job Print-Job Print-URI Validate-Job> Order deny,allow </Limit> <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document> Require user @OWNER @SYSTEM Order deny,allow </Limit> <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices> AuthType Default Require user @SYSTEM Order deny,allow </Limit> <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs> AuthType Default Require user @SYSTEM Order deny,allow </Limit> <Limit Cancel-Job CUPS-Authenticate-Job> Require user @OWNER @SYSTEM Order deny,allow </Limit> <Limit All> Order deny,allow </Limit> </Policy> <Policy authenticated> JobPrivateAccess default JobPrivateValues default SubscriptionPrivateAccess default SubscriptionPrivateValues default <Limit Create-Job Print-Job Print-URI Validate-Job> AuthType Default Order deny,allow </Limit> <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document> AuthType Default Require user @OWNER @SYSTEM Order deny,allow </Limit> <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default> AuthType Default Require user @SYSTEM Order deny,allow </Limit> <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs> AuthType Default Require user @SYSTEM Order deny,allow </Limit> <Limit Cancel-Job CUPS-Authenticate-Job> AuthType Default Require user @OWNER @SYSTEM Order deny,allow </Limit> <Limit All> Order deny,allow </Limit> </Policy> JobPrivateAccess default JobPrivateValues default SubscriptionPrivateAccess default SubscriptionPrivateValues default

  Read the article

• Adopting DBVCS

  - by Wes McClure

  Identify early adopters Pick a small project with a small(ish) team.  This can be a legacy application or a green-field application. Strive to find a team of early adopters that will be eager to try something new. Get the team on board! Research Research the tool(s) that you want to use.  Some tools provide all of the features you would need while some only provide a slice of the pie.  DBVCS requires the ability to manage a set of change scripts that update a database from one version to the next.  Ideally a tool can track database versions and automatically apply updates.  The change script generation process can be manual, but having diff tools available to automatically generate it can really reduce the overhead to adoption.  Finally, an automated tool to generate a script file per database object is an added bonus as your version control system can quickly identify what was changed in a commit (add/del/modify), just like with code changes. Don’t settle on just one tool, identify several.  Then work with the team to evaluate the tools.  Have the team do some tests of the following scenarios with each tool: Baseline an existing database: can the migration tool work with legacy databases?  Caution: most migration platforms do not support baselines or have poor support, especially the fad of fluent APIs. Add/drop tables Add/drop procedures/functions/views Alter tables (rename columns, add columns, remove columns) Massage data – migrations sometimes involve changing data types that cannot be implicitly casted and require you to decide how the data is explicitly cast to the new type.  This is a requirement for a migrations platform.  Think about a case where you might want to combine fields, or move a field from one table to another, you wouldn’t want to lose the data. Run the tool via the command line.  If you cannot automate the tool in Continuous Integration what is the point? Create a copy of a database on demand. Backup/restore databases locally. Let the team give feedback and decide together, what tool they would like to try out. My recommendation at this point would be to include TSqlMigrations and RoundHouse as SQL based migration platforms.  In general I would recommend staying away from the fluent platforms as they often lack baseline capabilities and add overhead to learn a new API when SQL is already a very well known DSL.  Code migrations often get messy with procedures/views/functions as these have to be created with SQL and aren’t cross platform anyways.  IMO stick to SQL based migrations. Reconciling Production If your project is a legacy application, you will need to reconcile the current state of production with your development databases.  Find changes in production and bring them down to development, even if they are old and need to be removed.  Once complete, produce a baseline of either dev or prod as they are now in sync.  Commit this to your VCS of choice. Add whatever schema changes tracking mechanism your tool requires to your development database.  This often requires adding a table to track the schema version of that database.  Your tool should support doing this for you.  You can add this table to production when you do your next release. Script out any changes currently in dev.  Remove production artifacts that you brought down during reconciliation.  Add change scripts for any outstanding changes in dev since the last production release.  Commit these to your repository.   Say No to Shared Dev DBs Simply put, you wouldn’t dream of sharing a code checkout, why would you share a development database?  If you have a shared dev database, back it up, distribute the backups and take the shared version offline (including the dev db server once all projects are using DB VCS).  Doing DB VCS with a shared database is bound to cause problems as people won’t be able to easily script out their own changes from those that others are working on.   First prod release Copy prod to your beta/testing environment.  Add the schema changes table (or mechanism) and do a test run of your changes.  If successful you can schedule this to be run on production.   Evaluation After your first release, evaluate the pain points of the process.  Try to find tools or modifications to existing tools to help fix them.  Don’t leave stones unturned, iteratively evolve your tools and practices to make the process as seamless as possible.  This is why I suggest open source alternatives.  Nothing is set in stone, a good example was adding transactional support to TSqlMigrations.  We ran into situations where an update would break a database, so I added a feature to do transactional updates and rollback on errors!  Another good example is generating change scripts.  We have been manually making these for months now.  I found an open source project called Open DB Diff and integrated this with TSqlMigrations.  These were things we just accepted at the time when we began adopting our tool set.  Once we became comfortable with the base functionality, it was time to start automating more of the process.  Just like anything else with development, never be afraid to try to find tools to make your job easier!   Enjoy -Wes

  Read the article

• It’s nice to be important, but it’s more important to be nice

  - by BuckWoody

  I’ve been a little “preachy” lately, telling you that you should let people finish their sentences, and always check a problem out before you tell a user that their issue is “impossible”. Well, I’ll round that out with one more tip today. Keep in mind that all of these things are actions I’ve been guilty of, hopefully in the past. I’m kind of a “work in progress”. And yes, I know these tips are coming from someone who picks on people in presentations, but that is of course done in fun, and (hopefully) with the audience’s knowledge.   (No, this isn’t aimed at any one person or event in particular – I just see it happen a lot)   I’ve seen, unfortunately over and over, someone in authority react badly to someone who is incorrect, or at least perceived to be incorrect. This might manifest itself in a comment, post, question or whatever, but the point is that I’ve seen really intelligent people literally attack someone they view as getting something wrong. Don’t misunderstand me; if someone posts that you should always drop a production database in the middle of the day I think you should certainly speak up and mention that this might be a bad idea!  No, I’m talking about generalizations or even incorrect statements done in good faith. Let me explain with an example.   Suppose someone makes the statement: “If you don’t have enough space on your system, you can just use a DBCC command to shrink the database”. Let’s take two responses to this statement.   Response One: “That’s insane. Everyone knows that shrinking a database is a stupid idea, you’re just going to fragment your indexes all over the place.” Response Two: “That’s an interesting take – in my experience and from what I’ve read here (someurl.com) I think this might not be a universal best practice.”   Of course, both responses let the person making the statement and those reading it know that you don’t agree, and that it’s probably wrong. But the person you responded to and the general audience hearing you (or reading your response) might form two different opinions of you.   The first response says to me “this person really needs to be right, and takes arguments personally. They aren’t thinking of the other person at all, or the folks reading or hearing the exchange. They turned an incorrect technical statement into a personal attack. They haven’t left the other party any room to ‘save face’, and they have potentially turned what could be a positive learning experience for everyone into a negative. Also, they sound more than just a little arrogant.”   The second response says to me “this person has left room for everyone to save face, has presented evidence to the contrary and is thinking about moving the ball forward and getting it right rather than attacking someone for getting it wrong.” It’s the idea of questioning a statement rather than attacking a person.   Perhaps you have a different take. Maybe you think the “direct” approach is best – and maybe that’s worked for you. Something to consider is what you’ve really accomplished while using that first method. Sure, the info you provide is correct, and perhaps someone out there won’t shrink a database because of your response – but perhaps you’ve turned a lot more people off, and now they won’t listen to your other valuable information. You’ll be an expert, but another one of the nameless, arrogant jerks in technology. And I don’t think anyone likes to be thought of that way.   OK, I’ll get down off of the high-horse now. And I’ll keep the title of this entry (said to me by my grandmother when I was a little kid) in mind when I dismount. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• RSS Feeds currently on Simple-Talk

  - by Andrew Clarke

  There are a number of news-feeds for the Simple-Talk site, but for some reason they are well hidden. Whilst we set about reorganizing them, I thought it would be a good idea to list some of the more important ones. The most important one for almost all purposes is the Homepage RSS feed which represents the blogs and articles that are placed on the homepage. Main Site Feed representing the Homepage ..which is good for most purposes but won't always have all the blogs, or maybe it will occasionally miss an article. If you aren't interested in all the content, you can just use the RSS feeds that are more relevant to your interests. (We'll be increasing these categories soon) The newsfeed for SQL articles The .NET section newsfeed The newsfeed for Red Gate books The newsfeed for Opinion articles The SysAdmin section newsfeed if you want to get a more refined feed, then you can pick and choose from these feeds for each category so as to make up your custom news-feed in the SQL section, SQL Training Learn SQL Server Database Administration TSQL Programming SQL Server Performance Backup and Recovery SQL Tools SSIS SSRS (Reporting Services) in .NET there are... ASP.NET Windows Forms .NET Framework ,NET Performance Visual Studio .NET tools in Sysadmin there are Exchange General Virtualisation Unified Messaging Powershell in opinion, there is... Geek of the Week Opinion Pieces in Books, there is .NET Books SQL Books SysAdmin Books And all the blogs have got feeds. So although you can get all the blogs from here.. Main Blog Feed          You can get individual RSS feeds.. AdamRG's Blog       Alex.Davies's Blog       AliceE's Blog       Andrew Clarke's Blog       Andrew Hunter's Blog       Bart Read's Blog       Ben Adderson's Blog       BobCram's Blog       bradmcgehee's Blog       Brian Donahue's Blog       Charles Brown's Blog       Chris Massey's Blog       CliveT's Blog       Damon's Blog       David Atkinson's Blog       David Connell's Blog       Dr Dionysus's Blog       drsql's Blog       FatherJack's Blog       Flibble's Blog       Gareth Marlow's Blog       Helen Joyce's Blog       James's Blog       Jason Crease's Blog       John Magnabosco's Blog       Laila's Blog       Lionel's Blog       Matt Lee's Blog       mikef's Blog       Neil Davidson's Blog       Nigel Morse's Blog       Phil Factor's Blog       red@work's Blog       reka.burmeister's Blog       Richard Mitchell's Blog       RobbieT's Blog       RobertChipperfield's Blog       Rodney's Blog       Roger Hart's Blog       Simon Cooper's Blog       Simon Galbraith's Blog       TheFutureOfMonitoring's Blog       Tim Ford's Blog       Tom Crossman's Blog       Tony Davis's Blog       As well as these blogs, you also have the forums.... SQL Server for Beginners Forum     Programming SQL Server Forum    Administering SQL Server Forum    .NET framework Forum    .Windows Forms Forum   ASP.NET Forum   ADO.NET Forum 

  Read the article

< Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >