Search Results

Search found 8040 results on 322 pages for 'live messenger'.

Page 306/322 | < Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >

  • My Thoughts On the Xbox 180

    - by Chris Gardner
    Originally posted on: http://geekswithblogs.net/freestylecoding/archive/2013/06/21/my-thoughts-on-the-xbox-180.aspx Everyone seems to be putting their 0.00237 cents into the wishing well over Microsoft's recent decision to reverse the DRM policy on the Xbox One. However, there have been a few issues that nobody has touched. As such, I have decided to dig 0.00237 cents out of my pocket. First, let me be clear about this point. I do not support the decision to reverse the DRM policy on the Xbox One. I wanted that point to be expressed first and unambiguously. I will say it again. I do not support the decision to reverse the DRM policy on the Xbox One. Now that I have that out of the way, let me go into my rationale. This decision removes most of the cool features that enticed me to pre-order the console. No, I didn't cancel my pre-order. There is still five months before the release of the console, and there is still a plethora of information that we, as consumers, do not have. With that, it should be noted that much of the talk in this post is speculation and rhetoric. I do not have any insider information that you do not possess. The persistent connection would have allowed the console to do many of the functions for which we have been begging. That demo where someone was playing Ryse, seamlessly accepted a multiplayer challenge in Killer Instinct, played the match (and a rematch,) and then jumped back into Ryse. That's gone, if you bought the game on disc. The new, DRM free system will require the disc in the system to play a game. That bullet point where one Xbox Live account could have up to 10 slave accounts so families could play together, no matter where they were located. That's gone as well. The promise of huge, expansive, dynamically changing worlds that was brought to us with the power of cloud computing. Well, "the people" didn't want there to be a forced, persistent connection. As such, developers can't rely on a connection and, as such, that feature is gone. This is akin to the removal of the hard drive on the Xbox 360. The list continues, but the enthusiast press has enumerated the list far better than I wish. All of this is because the Xbox team saw the HUGE success of Steam and decided to borrow a few ideas. Yes, Steam. The service that everyone hated for the first six months (for the same reasons the Xbox One is getting flack.) There was an initial growing pain. However, it is now lauded as the way games distribution should be handled. Unless you are Microsoft. I do find it curious that many of the features were originally announced for the PS4 during its unveiling. However, much of that was left strangely absent for Sony's E3 press conference. Instead, we received a single, static slide that basically said the exact opposite of Microsoft's plans. It is not farfetched to believe that slide came into existence during the approximately seven hours between the two media briefings. The thing that majorly annoys me over this whole kerfuffle is that the single thing that caused the call to arms is, really, not an issue. Microsoft never said they were going to block used sales. They said it was up to the publisher to make that decision. This would have allowed publishers to reclaim some of the costs of development in subsequent sales of the product. If you sell your game to GameStop for 7 USD, GameStop is going to sell it for 55 USD. That is 48 USD pure profit for them. Some publishers asked GameStop for a small cut. Was this a huge, money grubbing scheme? Well, yes, but the idea was that they have to handle server infrastructure for dormant accounts, etc. Of course, GameStop flatly refused, and the Online Pass was born. Fortunately, this trend didn’t last, and most publishers have stopped the practice. The ability to sell "licenses" has already begun to be challenged. Are you living in the EU? If so, companies must allow you to sell digital property. With this precedent in place, it's only a matter of time before other areas follow suit. If GameStop were smart, they should have immediately contacted every publisher out there to get the rights to become a clearing house for these licenses. Then, they keep their business model and could reduce their brick and mortar footprint. The digital landscape is changing. We need to not block this process. As Seth MacFarlane best said "Some issues are so important that you should drag people kicking and screaming." I believe this was said on an episode of Real Time with Bill Maher about the issue of Gay Marriages. Much like the original source, this is an issue that we need to drag people to the correct, progressive position. Microsoft, as a company, actually has the resources to weather the transition period. They have a great pool of first and second party developers that can leverage this new framework to prove the validity. Over time, the third party developers will get excited to use these tools. As an old C++ guy, I resisted C# for years. Now, I think it's one of the best languages I've ever used. I have a server room and a Co-Lo full of servers, so I originally didn't see the value in Azure. Now, I wish I could move every one of my projects into the cloud. I still LOVE getting physical packaging, which my music and games collection will proudly attest. However, I have started to see the value in pure digital, and have found ways to integrate this into the ways I consume those products. I can, honestly, understand how some parts of the population would be very apprehensive about this new landscape. There were valid arguments about people with no internet access. There are ways to combat these problems. These methods do not require us to throw the baby out with the bathwater. However, the number of people in the computer industry that I have seen cry foul is truly appalling. We are the forward looking people that help show how technology can improve people's lives. If we can't see the value of the brief pain involved with an exciting new ecosystem, than who will?

    Read the article

  • Running TeamCity from Amazon EC2 - Cloud based scalable build and continuous Integration

    - by RoyOsherove
    I’ve been having fun playing with the amazon EC2 cloud service. I set up a server running TeamCity, and an image of a server that just runs a TeamCity agent. I also setup TeamCity  to automatically instantiate agents on EC2 and shut them down based upon availability of free agents. Here’s how I did it: The first step was setting up the teamcity server. Create an account on amazon EC2 (BTW, amazon’s sites works better in IE than it does in chrome.. who knew!?) Open the EC2 dashboard, and click “Launch Instance” . From the “Quick Start” tab I selected from the list: “Getting Started on Microsoft Windows Server 2008 (AMI Id: ami-c5e40dac)” .  it’s good enough to just run teamcity. In the instance details, I used the default (Small instance, 1.7 GB mem). You might want to choose a close availability zone based on where you are. We want to “Launch instances” so click continue. Select the default kernel, RAM disk and all. No need to enable monitoring for now (you can do that later). click continue. If you don’t have a key pair, you will be prompted to create one. Once you do, select it in the list. Now you’ll be prompted to create a security group. I named mine “TC” as in “TeamCity”. each group is a bunch of settings on which ports can be let through into and out of a hosted machine.  keep it as the default settings. We will change them later. Click continue,  review and then click “Launch”. Now you’ll be able to see the new instance in the running instances list on your site. Now, you need to install stuff on that instance (TeamCity!) . To do that, you’ll need to Remote desktop into that instance. To do that, we’ll get the admin password for that instance: Check it on the list, and click “Instance Actions” - “Get Windows Admin Password”. You might have to wait about 10 minutes or so for the password to be generated for you. Once you have the password, you will remote desktop (start-run-‘mstsc’) into the instance. It’s address is a dns address shown below the list under “Public DNS”. it looks something like: ec2-256-226-194-91.compute-1.amazonaws.com Once you’re inside the instance – you’ll need to open IE (it is in hardened mode so you’ll have to relax its security settings to download stuff). I first downloaded chrome and using chrome I downloaded TeamCity. Note that the download speed is FAST. several MBs per second. To be able to see TeamCity from the outside, you will need to open the advanced firewall settings inside the remote machine, and add incoming and outgoing rules for port 80 (HTTP). Once you do that, you should be able to see the machine from the outside. If you still can’t, see the next step. I also enabled ports 9090 since I will use this machine to create an agent image later as well. Now configure the security group (TC) to enable talking to agents: IN the EC2 dashboard click on “Security Groups” and select your group. To add a rule, click on the empty list under the ‘protocol’ header. select TCP. from and ‘to’ ports are 9090. source ip is 0.0.0.0/0 (every ip is allowed). click “Save.  Also make sure you can see “HTTP” tcp 80 in that list. if you can’t see it, add it or you won’t be able to browse to the machine’s teamcity server home page. I also set an elastic IP for the machine: so I always have the same IP for the machine instance. Allocate and set one through the”Elastic IP” link on the EC2 dashboard.   you should now have a working instance of teamcity.   Now let’s create an agent image. Repeat steps 1-9, but this time, make sure you select a machine that fits what an agent might do. I selected Instance type – Hihg-CPU medium machine,  that is much faster. On that machine, I installed what I needed (VS 2010, PostSharp etc..). downloading VS 2010 from MSDN (2 GB took less than 10 min!) Now, instead of installing teamcity, browse using the browser to the teamcity homepage (from within the remote machine). go to the Administration page, and click the upper right link “Install agents”. Install the agent on he local machine – set it to the IP or DNS of the running TeamCity server. That way you’ll be able to check their connectivity live before making this machine your official agent image to reuse. Once the agent is installed, see that the TC server can see it and use it. see steps 13-14 above if they can’t. Once it works, you can take steps to make this image your agent image to be reused. next, here is a copy-paste of several steps to take from http://confluence.jetbrains.net/display/TCD5/Setting+Up+TeamCity+for+Amazon+EC2 Configure system so that agent it is started on machine boot (and make sure TeamCity server is accessible on machine boot). Test the setup by rebooting machine and checking that the agent connects normally to the server. Prepare the Image for bundling: Remove any temporary/history information in the system. Stop the agent (under Windows stop the service but leave it in Automatic startup type) Delete content agent logs and temp directories (not necessary) Delete "<Agent Home>/conf/amazon-*" file (not necessary) Change config/buildAgent.properties to remove properties: name, serverAddress, authToken (not necessary)   Now, we need to: Make AMI from the running instance. Configure TeamCity EC2 support on TeamCity server. Making an AMI: Check the instance of the agent in the EC2 dashboard instance list, and select instance actions->Create Image (EBS AMI) you’ll see the image pending in the APIs list in the EC2 dashboard. this could take 30 minutes or more. meanwhile we can configure the could support in the teamcity server. COPY THE AMI ID to the clipboard (looks like ami-a88aa4ce) Configuring TeamCity for Cloud: In TeamCity, click on “Agents” and then on “Cloud” tab. this is where you will control your cloud agents. to configure new cloud agents based on APIs, click on the right link to the “configuration page” Create a new profile and select AMazon EC2 as cloud type. Use your AMI ID that you copied to the clipboard into the “Images” field. Select an availability zone that is the same as the one your instance is running on for best communication perf between them make sure you select the ‘TC’ security group hopefully, that should be it, and teamcity will try to instantiate new instances on demand. Note that it may take around 10 minutes for an agent to become available to teamcity from the time it’s started.

    Read the article

  • Thank You for a Great Welcome for Oracle GoldenGate 11g Release 2

    - by Irem Radzik
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:Calibri; mso-fareast-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Yesterday morning we had two launch webcasts for Oracle GoldenGate 11g Release 2. I had the pleasure to present, as well as moderate the Q&A panels in both of these webcasts. Both events had hundreds of live attendees, sending us over 150 questions. Even though we left 30 minutes for Q&A, it was not nearly enough time to address for all the insightful questions our audience sent. Our product management team and I really appreciate the interaction we had yesterday and we are starting to respond back with outstanding questions today. Oracle GoldenGate’s new release launch also had great welcome from the media. You can find the links for various articles on the new release below: ITBusinessEdge Oracle Embraces Cross-Platform Data Integration Information Week: Oracle Real-Time Advance Taps Compressed Data Integration Developer News, Oracle GoldenGate Adds Deeper Oracle Integration, Extends Real-Time Performance CIO, Oracle GoldenGate Buddies Up with Sibling Software DBTA, Real-Time Data Integration: Oracle GoldenGate 11g Release 2 Now Available CBR Oracle unveils GoldenGate 11g Release 2 real-time data integration application In this blog, I want to address some of the frequently asked questions that came up during the webcasts. You can find the top questions and their answers along with related resources below. We will continue to address frequently asked questions via future blogs. Q: Will the new Integrated Capture for Oracle Database replace the Classic Capture? If not, which one do I use when? A: No, Classic Capture will be around for long time. Core platform specific features, bug fixes, and patches will be available for both Capture processes.Oracle Database specific features will be only available in the Integrated Capture. The Integrated Capture for Oracle Database is an option for users that need to capture data from compressed tables or need support for XML data types, XA on RAC. Users who don’t leverage these features should continue to use our Classic Capture. For more information on Oracle GoldenGate 11g Release 2 I recommend to check out the White paper: Oracle GoldenGate 11gR2 New Features as well as other technical white papers we have on OTN.                                                         For those of you coming to OpenWorld, please attend the related session: Extracting Data in Oracle GoldenGate Integrated Capture Mode, Monday Oct 1st 1:45pm Moscone South – 102 to learn more about this new feature. Q: What is new in Conflict Detection and Resolution? And how does it work? A: There are now pre-built functions to identify the conditions under which an error occurs and how to handle the record when the condition occurs. Error conditions handled include inserts into a target table where the row already exists, updates or deletes to target table rows that exist, but the original source data (before columns) do not match the existing data in the target row, and updates or deletes where the row does not exist in the target database table.Foreach of these conditions a method to handle the error is specified.  Please check out our recent blog on this topic and the White paper: Oracle GoldenGate 11gR2 New Features white paper.  Also, for those attending OpenWorld please attend the session: Best Practices for Conflict Detection and Resolution in Oracle GoldenGate for Active/Active-  Wednesday Oct 3rd  3:30pm Mascone 3000 Q: Does Oracle GoldenGate Veridata and the Management Pack require additional licenses, or is it incorporated with the GoldenGate license? A: Oracle GoldenGate Veridata and Oracle Management Pack for Oracle GoldenGate are additional products and require separate licenses. Please check out Oracle's price list here. Q: Does GoldenGate - Oracle Enterprise Manager Plug-in require additional license? A: Oracle Enterprise Manager Plug-in is included in the Oracle Management Pack for Oracle GoldenGate license, which is separate from Oracle GoldenGate license. There is no separate license for the Enterprise Manager Plug-in by itself. Oracle GoldenGate Monitor, Oracle GoldenGate Director, and Enterprise Manager Plug-in are included in the Management Pack for Oracle GoldenGate license. Please check out Management Pack for Oracle GoldenGate data sheet for more info on this product bundle. Q: Is Oracle GoldenGate replacing Oracle Streams product? A: Oracle GoldenGate is the strategic data replication product. Therefore, Oracle Streams will continue to be supported, but will not be actively enhanced. Rather, the best elements of Oracle Streams will be added to Oracle GoldenGate. Conflict management is one of them and with the latest release Oracle GoldenGate has a more advanced conflict management offering. Current customers depending on Oracle Streams will continue to be fully supported. Q: How is Oracle GoldenGate different than Oracle Data Integrator? A: Oracle Data Integrator is designed for fast bulk data movement and transformation between heterogeneous systems, while GoldenGate is designed for real-time movement of transactions between heterogeneous systems. These two products are completely complementary where GoldenGate provides low-impact real-time change data capture and delivery to a staging area on the target. And Oracle Data Integrator transforms this data and loads the DW tables. In fact, Oracle Data Integrator integrates with GoldenGate to use GoldenGate’s Capture process as one option for its CDC mechanism. We have several customers that deployed GoldenGate and ODI together to feed real-time data to their data warehousing solutions. Please also check out Oracle Data Integrator Changed Data Capture with Oracle GoldenGate Data Sheet (PDF). Thank you again very much for welcoming Oracle GoldenGate 11g Release 2 and stay in touch with us for more exciting news, updates, and events.

    Read the article

  • Windows Azure Myths

    - by BuckWoody
    Windows Azure is part of the Microsoft "stack" - the suite of software and services we offer. Because we have so many products in almost every part of technology, it's hard to know everything about all parts of what we do - even for those of us who work here. So it's no surprise that some folks are not as familiar with Windows and SQL Azure as they are, say Windows Server or XBox. As I chat with folks about a solution for a business or organization need, I put Windows Azure into the mix. I always start off with "What do you already know about Windows Azure?" so that I don't bore folks with information they already have. I some cases they've checked out the product ahead of time and have specific questions, in others they aren't as familiar, and in still others there is a fair amount of mis-information. Sometimes that's because of a marketing failure, sometimes it's hearsay, and somtetimes it's active misinformation. I thought I might lay out a few of these misconceptions. As always - do your fact-checking! Never take anyone's word alone (including mine) as gospel. Make sure you educate yourself on your options. Your company or your clients depend on you to have the right information on IT, so make sure you live up to that. Myth 1: Nobody uses Windows Azure It's true that we don't give out numbers on the amount of clients on Windows and SQL Azure. But lots of folks are here - companies you may have heard of like Boeing, NASA, Fujitsu, The City of London, Nuedesic, and many others. I deal with firms small and large that use Windows Azure for mission-critical applications, sometimes totally on Windows and/or SQL Azure, sometimes in conjunction with an on-premises system, sometimes for only a specific component in Windows Azure like storage. The interesting thing is that many sites you visit have a Windows Azure component, or are running on Windows Azure. They just don't announce it. Just like the other cloud providers, the companies have asked to be completely branded themselves - they don't want you to be aware or care that they are on Windows Azure. Sometimes that's for security, other times it's for different reasons. It's just like the web sites you visit. For the most part, they don't advertise which OS or Web Server they use. It really just shouldn't matter. The point is that they just use what works to solve a given problem. Check out a few public case studies here: https://www.windowsazure.com/en-us/home/case-studies/ Myth 2: It's only for Microsoft stuff - can't use Open Source This is the one I face the most, and am the most dismayed by. We work just fine with many open source products, including Java, NodeJS, PHP, Ruby, Python, Hadoop, and many other languages and applications. You can quickly deploy a Wordpress, Umbraco and other "kits". We have software development kits (SDK's) for iPhones, iPads, Android, Windows phones and more. We have an SDK to work with FaceBook and other social networks. In short, we play well with others. More on the languages and runtimes we support here: https://www.windowsazure.com/en-us/develop/overview/ More on the SDK's here: http://www.wadewegner.com/2011/05/windows-azure-toolkit-for-ios/, http://www.wadewegner.com/2011/08/windows-azure-toolkits-for-devices-now-with-android/, http://azuretoolkit.codeplex.com/ Myth 3: Microsoft expects me to switch everything to "the cloud" No, we don't. That would be disasterous, unless the only things you run in your company uses works perfectly in Azure. Use Windows Azure  - or any cloud for that matter - where it works. Whenever I talk to companies, I focus on two things: Something that is broken and needs to be re-architected Something you want to do that is new If something is broken, and you need new tools to scale, extend, add capacity dynamically and so on, then you can consider using Windows or SQL Azure. It can help solve problems that you have, or it may include a component you don't want to write or architect yourself. Sometimes you want to do something new, like extend your company's offerings to mobile phones, to the web, or to a social network. More info on where it works here: http://blogs.msdn.com/b/buckwoody/archive/2011/01/18/windows-azure-and-sql-azure-use-cases.aspx Myth 4: I have to write code to use Windows and SQL Azure If Windows Azure is a PaaS - a Platform as a Service - then don't you have to write code to use it? Nope. Windows and SQL Azure are made up of various components. Some of those components allow you to write and deploy code (like Compute) and others don't. We have lots of customers using Windows Azure storage as a backup, to securely share files instead of using DropBox, to distribute videos or code or firmware, and more. Others use our High Performance Computing (HPC) offering to rent a supercomputer when they need one. You can even throw workloads at that using Excel! In addition there are lots of other components in Windows Azure you can use, from the Windows Azure Media Services to others. More here: https://www.windowsazure.com/en-us/home/scenarios/saas/ Myth 5: Windows Azure is just another form of "vendor lock-in" Windows Azure uses .NET, OSS languages and standard interfaces for the code. Sure, you're not going to take the code line-for-line and run it on a mainframe, but it's standard code that you write, and can port to something else. And the data is yours - you can bring it back whever you want. It's either in text or binary form, that you have complete control over. There are no licenses - you can "pay as you go", and when you're done, you can leave the service and take all your code, data and IP with you.   So go out there, read up, try it. Use it where it works. And don't believe everything you hear - sometimes the Internet doesn't get it all correct. :)

    Read the article

  • Scripting Language Sessions at Oracle OpenWorld and MySQL Connect, 2012

    - by cj
    This posts highlights some great scripting language sessions coming up at the Oracle OpenWorld and MySQL Connect conferences. These events are happening in San Francisco from the end of September. You can search for other interesting conference sessions in the Content Catalog. Also check out what is happening at JavaOne in that event's Content Catalog (I haven't included sessions from it in this post.) To find the timeslots and locations of each session, click their respective link and check the "Session Schedule" box on the top right. GEN8431 - General Session: What’s New in Oracle Database Application Development This general session takes a look at what’s been new in the last year in Oracle Database application development tools using the latest generation of database technology. Topics range from Oracle SQL Developer and Oracle Application Express to Java and PHP. (Thomas Kyte - Architect, Oracle) BOF9858 - Meet the Developers of Database Access Services (OCI, ODBC, DRCP, PHP, Python) This session is your opportunity to meet in person the Oracle developers who have built Oracle Database access tools and products such as the Oracle Call Interface (OCI), Oracle C++ Call Interface (OCCI), and Open Database Connectivity (ODBC) drivers; Transparent Application Failover (TAF); Oracle Database Instant Client; Database Resident Connection Pool (DRCP); Oracle Net Services, and so on. The team also works with those who develop the PHP, Ruby, Python, and Perl adapters for Oracle Database. Come discuss with them the features you like, your pains, and new product enhancements in the latest database technology. CON8506 - Syndication and Consolidation: Oracle Database Driver for MySQL Applications This technical session presents a new Oracle Database driver that enables you to run MySQL applications (written in PHP, Perl, C, C++, and so on) against Oracle Database with almost no code change. Use cases for such a driver include application syndication such as interoperability across a relationship database management system, application migration, and database consolidation. In addition, the session covers enhancements in database technology that enable and simplify the migration of third-party databases and applications to and consolidation with Oracle Database. Attend this session to learn more and see a live demo. (Srinath Krishnaswamy - Director, Software Development, Oracle. Kuassi Mensah - Director Product Management, Oracle. Mohammad Lari - Principal Technical Staff, Oracle ) CON9167 - Current State of PHP and MySQL Together, PHP and MySQL power large parts of the Web. The developers of both technologies continue to enhance their software to ensure that developers can be satisfied despite all their changing and growing needs. This session presents an overview of changes in PHP 5.4, which was released earlier this year and shows you various new MySQL-related features available for PHP, from transparent client-side caching to direct support for scaling and high-availability needs. (Johannes Schlüter - SoftwareDeveloper, Oracle) CON8983 - Sharding with PHP and MySQL In deploying MySQL, scale-out techniques can be used to scale out reads, but for scaling out writes, other techniques have to be used. To distribute writes over a cluster, it is necessary to shard the database and store the shards on separate servers. This session provides a brief introduction to traditional MySQL scale-out techniques in preparation for a discussion on the different sharding techniques that can be used with MySQL server and how they can be implemented with PHP. You will learn about static and dynamic sharding schemes, their advantages and drawbacks, techniques for locating and moving shards, and techniques for resharding. (Mats Kindahl - Senior Principal Software Developer, Oracle) CON9268 - Developing Python Applications with MySQL Utilities and MySQL Connector/Python This session discusses MySQL Connector/Python and the MySQL Utilities component of MySQL Workbench and explains how to write MySQL applications in Python. It includes in-depth explanations of the features of MySQL Connector/Python and the MySQL Utilities library, along with example code to illustrate the concepts. Those interested in learning how to expand or build their own utilities and connector features will benefit from the tips and tricks from the experts. This session also provides an opportunity to meet directly with the engineers and provide feedback on your issues and priorities. You can learn what exists today and influence future developments. (Geert Vanderkelen - Software Developer, Oracle) BOF9141 - MySQL Utilities and MySQL Connector/Python: Python Developers, Unite! Come to this lively discussion of the MySQL Utilities component of MySQL Workbench and MySQL Connector/Python. It includes in-depth explanations of the features and dives into the code for those interested in learning how to expand or build their own utilities and connector features. This is an audience-driven session, so put on your best Python shirt and let’s talk about MySQL Utilities and MySQL Connector/Python. (Geert Vanderkelen - Software Developer, Oracle. Charles Bell - Senior Software Developer, Oracle) CON3290 - Integrating Oracle Database with a Social Network Facebook, Flickr, YouTube, Google Maps. There are many social network sites, each with their own APIs for sharing data with them. Most developers do not realize that Oracle Database has base tools for communicating with these sites, enabling all manner of information, including multimedia, to be passed back and forth between the sites. This technical presentation goes through the methods in PL/SQL for connecting to, and then sending and retrieving, all types of data between these sites. (Marcelle Kratochvil - CTO, Piction) CON3291 - Storing and Tuning Unstructured Data and Multimedia in Oracle Database Database administrators need to learn new skills and techniques when the decision is made in their organization to let Oracle Database manage its unstructured data. They will face new scalability challenges. A single row in a table can become larger than a whole database. This presentation covers the techniques a DBA needs for managing the large volume of data in a standard Oracle Database instance. (Marcelle Kratochvil - CTO, Piction) CON3292 - Using PHP, Perl, Visual Basic, Ruby, and Python for Multimedia in Oracle Database These five programming languages are just some of the most popular ones in use at the moment in the marketplace. This presentation details how you can use them to access and retrieve multimedia from Oracle Database. It covers programming techniques and methods for achieving faster development against Oracle Database. (Marcelle Kratochvil - CTO, Piction) UGF5181 - Building Real-World Oracle DBA Tools in Perl Perl is not normally associated with building mission-critical application or DBA tools. Learn why Perl could be a good choice for building your next killer DBA app. This session draws on real-world experience of building DBA tools in Perl, showing the framework and architecture needed to deal with portability, efficiency, and maintainability. Topics include Perl frameworks; Which Comprehensive Perl Archive Network (CPAN) modules are good to use; Perl and CPAN module licensing; Perl and Oracle connectivity; Compiling and deploying your app; An example of what is possible with Perl. (Arjen Visser - CEO & CTO, Dbvisit Software Limited) CON3153 - Perl: A DBA’s and Developer’s Best (Forgotten) Friend This session reintroduces Perl as a language of choice for many solutions for DBAs and developers. Discover what makes Perl so successful and why it is so versatile in our day-to-day lives. Perl can automate all those manual tasks and is truly platform-independent. Perl may not be in the limelight the way other languages are, but it is a remarkable language, it is still very current with ongoing development, and it has amazing online resources. Learn what makes Perl so great (including CPAN), get an introduction to Perl language syntax, find out what you can use Perl for, hear how Oracle uses Perl, discover the best way to learn Perl, and take away a small Perl project challenge. (Arjen Visser - CEO & CTO, Dbvisit Software Limited) CON10332 - Oracle RightNow CX Cloud Service’s Connect PHP API: Intro, What’s New, and Roadmap Connect PHP is a public API that enables developers to build solutions with the Oracle RightNow CX Cloud Service platform. This API is used primarily by developers working within the Oracle RightNow Customer Portal Cloud Service framework who are looking to gain access to data and services hosted by the Oracle RightNow CX Cloud Service platform through a backward-compatible API. Connect for PHP leverages the same data model and services as the Connect Web Services for SOAP API. Come to this session to get an introduction and learn what’s new and what’s coming up. (Mark Rhoads - Senior Principal Applications Engineer, Oracle. Mark Ericson - Sr. Principle Product Manager, Oracle) CON10330 - Oracle RightNow CX Cloud Service APIs and Frameworks Overview Oracle RightNow CX Cloud Service APIs are available in the following areas: desktop UI, Web services, customer portal, PHP, and knowledge. These frameworks provide access to Oracle RightNow CX Cloud Service’s Connect Common Object Model and custom objects. This session provides a broad overview of capabilities in all these areas. (Mark Ericson - Sr. Principle Product Manager, Oracle)

    Read the article

  • SQL SERVER – Faster SQL Server Databases and Applications – Power and Control with SafePeak Caching Options

    - by Pinal Dave
    Update: This blog post is written based on the SafePeak, which is available for free download. Today, I’d like to examine more closely one of my preferred technologies for accelerating SQL Server databases, SafePeak. Safepeak’s software provides a variety of advanced data caching options, techniques and tools to accelerate the performance and scalability of SQL Server databases and applications. I’d like to look more closely at some of these options, as some of these capabilities could help you address lagging database and performance on your systems. To better understand the available options, it is best to start by understanding the difference between the usual “Basic Caching” vs. SafePeak’s “Dynamic Caching”. Basic Caching Basic Caching (or the stale and static cache) is an ability to put the results from a query into cache for a certain period of time. It is based on TTL, or Time-to-live, and is designed to stay in cache no matter what happens to the data. For example, although the actual data can be modified due to DML commands (update/insert/delete), the cache will still hold the same obsolete query data. Meaning that with the Basic Caching is really static / stale cache.  As you can tell, this approach has its limitations. Dynamic Caching Dynamic Caching (or the non-stale cache) is an ability to put the results from a query into cache while maintaining the cache transaction awareness looking for possible data modifications. The modifications can come as a result of: DML commands (update/insert/delete), indirect modifications due to triggers on other tables, executions of stored procedures with internal DML commands complex cases of stored procedures with multiple levels of internal stored procedures logic. When data modification commands arrive, the caching system identifies the related cache items and evicts them from cache immediately. In the dynamic caching option the TTL setting still exists, although its importance is reduced, since the main factor for cache invalidation (or cache eviction) become the actual data updates commands. Now that we have a basic understanding of the differences between “basic” and “dynamic” caching, let’s dive in deeper. SafePeak: A comprehensive and versatile caching platform SafePeak comes with a wide range of caching options. Some of SafePeak’s caching options are automated, while others require manual configuration. Together they provide a complete solution for IT and Data managers to reach excellent performance acceleration and application scalability for  a wide range of business cases and applications. Automated caching of SQL Queries: Fully/semi-automated caching of all “read” SQL queries, containing any types of data, including Blobs, XMLs, Texts as well as all other standard data types. SafePeak automatically analyzes the incoming queries, categorizes them into SQL Patterns, identifying directly and indirectly accessed tables, views, functions and stored procedures; Automated caching of Stored Procedures: Fully or semi-automated caching of all read” stored procedures, including procedures with complex sub-procedure logic as well as procedures with complex dynamic SQL code. All procedures are analyzed in advance by SafePeak’s  Metadata-Learning process, their SQL schemas are parsed – resulting with a full understanding of the underlying code, objects dependencies (tables, views, functions, sub-procedures) enabling automated or semi-automated (manually review and activate by a mouse-click) cache activation, with full understanding of the transaction logic for cache real-time invalidation; Transaction aware cache: Automated cache awareness for SQL transactions (SQL and in-procs); Dynamic SQL Caching: Procedures with dynamic SQL are pre-parsed, enabling easy cache configuration, eliminating SQL Server load for parsing time and delivering high response time value even in most complicated use-cases; Fully Automated Caching: SQL Patterns (including SQL queries and stored procedures) that are categorized by SafePeak as “read and deterministic” are automatically activated for caching; Semi-Automated Caching: SQL Patterns categorized as “Read and Non deterministic” are patterns of SQL queries and stored procedures that contain reference to non-deterministic functions, like getdate(). Such SQL Patterns are reviewed by the SafePeak administrator and in usually most of them are activated manually for caching (point and click activation); Fully Dynamic Caching: Automated detection of all dependent tables in each SQL Pattern, with automated real-time eviction of the relevant cache items in the event of “write” commands (a DML or a stored procedure) to one of relevant tables. A default setting; Semi Dynamic Caching: A manual cache configuration option enabling reducing the sensitivity of specific SQL Patterns to “write” commands to certain tables/views. An optimization technique relevant for cases when the query data is either known to be static (like archive order details), or when the application sensitivity to fresh data is not critical and can be stale for short period of time (gaining better performance and reduced load); Scheduled Cache Eviction: A manual cache configuration option enabling scheduling SQL Pattern cache eviction based on certain time(s) during a day. A very useful optimization technique when (for example) certain SQL Patterns can be cached but are time sensitive. Example: “select customers that today is their birthday”, an SQL with getdate() function, which can and should be cached, but the data stays relevant only until 00:00 (midnight); Parsing Exceptions Management: Stored procedures that were not fully parsed by SafePeak (due to too complex dynamic SQL or unfamiliar syntax), are signed as “Dynamic Objects” with highest transaction safety settings (such as: Full global cache eviction, DDL Check = lock cache and check for schema changes, and more). The SafePeak solution points the user to the Dynamic Objects that are important for cache effectiveness, provides easy configuration interface, allowing you to improve cache hits and reduce cache global evictions. Usually this is the first configuration in a deployment; Overriding Settings of Stored Procedures: Override the settings of stored procedures (or other object types) for cache optimization. For example, in case a stored procedure SP1 has an “insert” into table T1, it will not be allowed to be cached. However, it is possible that T1 is just a “logging or instrumentation” table left by developers. By overriding the settings a user can allow caching of the problematic stored procedure; Advanced Cache Warm-Up: Creating an XML-based list of queries and stored procedure (with lists of parameters) for periodically automated pre-fetching and caching. An advanced tool allowing you to handle more rare but very performance sensitive queries pre-fetch them into cache allowing high performance for users’ data access; Configuration Driven by Deep SQL Analytics: All SQL queries are continuously logged and analyzed, providing users with deep SQL Analytics and Performance Monitoring. Reduce troubleshooting from days to minutes with database objects and SQL Patterns heat-map. The performance driven configuration helps you to focus on the most important settings that bring you the highest performance gains. Use of SafePeak SQL Analytics allows continuous performance monitoring and analysis, easy identification of bottlenecks of both real-time and historical data; Cloud Ready: Available for instant deployment on Amazon Web Services (AWS). As you can see, there are many options to configure SafePeak’s SQL Server database and application acceleration caching technology to best fit a lot of situations. If you’re not familiar with their technology, they offer free-trial software you can download that comes with a free “help session” to help get you started. You can access the free trial here. Also, SafePeak is available to use on Amazon Cloud. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

  • Try a sample: Using the counter predicate for event sampling

    - by extended_events
    Extended Events offers a rich filtering mechanism, called predicates, that allows you to reduce the number of events you collect by specifying criteria that will be applied during event collection. (You can find more information about predicates in Using SQL Server 2008 Extended Events (by Jonathan Kehayias)) By evaluating predicates early in the event firing sequence we can reduce the performance impact of collecting events by stopping event collection when the criteria are not met. You can specify predicates on both event fields and on a special object called a predicate source. Predicate sources are similar to action in that they typically are related to some type of global information available from the server. You will find that many of the actions available in Extended Events have equivalent predicate sources, but actions and predicates sources are not the same thing. Applying predicates, whether on a field or predicate source, is very similar to what you are used to in T-SQL in terms of how they work; you pick some field/source and compare it to a value, for example, session_id = 52. There is one predicate source that merits special attention though, not just for its special use, but for how the order of predicate evaluation impacts the behavior you see. I’m referring to the counter predicate source. The counter predicate source gives you a way to sample a subset of events that otherwise meet the criteria of the predicate; for example you could collect every other event, or only every tenth event. Simple CountingThe counter predicate source works by creating an in memory counter that increments every time the predicate statement is evaluated. Here is a simple example with my favorite event, sql_statement_completed, that only collects the second statement that is run. (OK, that’s not much of a sample, but this is for demonstration purposes. Here is the session definition: CREATE EVENT SESSION counter_test ON SERVERADD EVENT sqlserver.sql_statement_completed    (ACTION (sqlserver.sql_text)    WHERE package0.counter = 2)ADD TARGET package0.ring_bufferWITH (MAX_DISPATCH_LATENCY = 1 SECONDS) You can find general information about the session DDL syntax in BOL and from Pedro’s post Introduction to Extended Events. The important part here is the WHERE statement that defines that I only what the event where package0.count = 2; in other words, only the second instance of the event. Notice that I need to provide the package name along with the predicate source. You don’t need to provide the package name if you’re using event fields, only for predicate sources. Let’s say I run the following test queries: -- Run three statements to test the sessionSELECT 'This is the first statement'GOSELECT 'This is the second statement'GOSELECT 'This is the third statement';GO Once you return the event data from the ring buffer and parse the XML (see my earlier post on reading event data) you should see something like this: event_name sql_text sql_statement_completed SELECT ‘This is the second statement’ You can see that only the second statement from the test was actually collected. (Feel free to try this yourself. Check out what happens if you remove the WHERE statement from your session. Go ahead, I’ll wait.) Percentage Sampling OK, so that wasn’t particularly interesting, but you can probably see that this could be interesting, for example, lets say I need a 25% sample of the statements executed on my server for some type of QA analysis, that might be more interesting than just the second statement. All comparisons of predicates are handled using an object called a predicate comparator; the simple comparisons such as equals, greater than, etc. are mapped to the common mathematical symbols you know and love (eg. = and >), but to do the less common comparisons you will need to use the predicate comparators directly. You would probably look to the MOD operation to do this type sampling; we would too, but we don’t call it MOD, we call it divides_by_uint64. This comparator evaluates whether one number is divisible by another with no remainder. The general syntax for using a predicate comparator is pred_comp(field, value), field is always first and value is always second. So lets take a look at how the session changes to answer our new question of 25% sampling: CREATE EVENT SESSION counter_test_25 ON SERVERADD EVENT sqlserver.sql_statement_completed    (ACTION (sqlserver.sql_text)    WHERE package0.divides_by_uint64(package0.counter,4))ADD TARGET package0.ring_bufferWITH (MAX_DISPATCH_LATENCY = 1 SECONDS)GO Here I’ve replaced the simple equivalency check with the divides_by_uint64 comparator to check if the counter is evenly divisible by 4, which gives us back every fourth record. I’ll leave it as an exercise for the reader to test this session. Why order matters I indicated at the start of this post that order matters when it comes to the counter predicate – it does. Like most other predicate systems, Extended Events evaluates the predicate statement from left to right; as soon as the predicate statement is proven false we abandon evaluation of the remainder of the statement. The counter predicate source is only incremented when it is evaluated so whether or not the counter is incremented will depend on where it is in the predicate statement and whether a previous criteria made the predicate false or not. Here is a generic example: Pred1: (WHERE statement_1 AND package0.counter = 2)Pred2: (WHERE package0.counter = 2 AND statement_1) Let’s say I cause a number of events as follows and examine what happens to the counter predicate source. Iteration Statement Pred1 Counter Pred2 Counter A Not statement_1 0 1 B statement_1 1 2 C Not statement_1 1 3 D statement_1 2 4 As you can see, in the case of Pred1, statement_1 is evaluated first, when it fails (A & C) predicate evaluation is stopped and the counter is not incremented. With Pred2 the counter is evaluated first, so it is incremented on every iteration of the event and the remaining parts of the predicate are then evaluated. In this example, Pred1 would return an event for D while Pred2 would return an event for B. But wait, there is an interesting side-effect here; consider Pred2 if I had run my statements in the following order: Not statement_1 Not statement_1 statement_1 statement_1 In this case I would never get an event back from the system because the point at which counter=2, the rest of the predicate evaluates as false so the event is not returned. If you’re using the counter target for sampling and you’re not getting the expected events, or any events, check the order of the predicate criteria. As a general rule I’d suggest that the counter criteria should be the last element of your predicate statement since that will assure that your sampling rate will apply to the set of event records defined by the rest of your predicate. Aside: I’m interested in hearing about uses for putting the counter predicate criteria earlier in the predicate statement. If you have one, post it in a comment to share with the class. - Mike Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • ASP.NET MVC JavaScript Routing

    - by zowens
    Have you ever done this sort of thing in your ASP.NET MVC view? The weird thing about this isn’t the alert function, it’s the code block containing the Url formation using the ASP.NET MVC UrlHelper. The terrible thing about this experience is the obvious lack of IntelliSense and this ugly inline JavaScript code. Inline JavaScript isn’t portable to other pages beyond the current page of execution. It is generally considered bad practice to use inline JavaScript in your public-facing pages. How ludicrous would it be to copy and paste the entire jQuery code base into your pages…? Not something you’d ever consider doing. The problem is that your URLs have to be generated by ASP.NET at runtime and really can’t be copied to your JavaScript code without some trickery. How about this? Does the hard-coded URL bother you? It really bothers me. The typical solution to this whole routing in JavaScript issue is to just hard-code your URLs into your JavaScript files and call it done. But what if your URLs change? You have to now go an track down the places in JavaScript and manually replace them. What if you get the pattern wrong? Do you have tests around it? This isn’t something you should have to worry about.   The Solution To Our Problems The solution is to port routing over to JavaScript. Does that sound daunting to you? It’s actually not very hard, but I decided to create my own generator that will do all the work for you. What I have created is a very basic port of the route formation feature of ASP.NET routing. It will generate the formatted URLs based on your routing patterns. Here’s how you’d do this: Does that feel familiar? It looks a lot like something you’d do inside of your ASP.NET MVC views… but this is inside of a JavaScript file… just a plain ol’ .js file.  Your first question might be why do you have to have that “.toUrl()” thing. The reason is that I wanted to make POST and GET requests dead simple. Here’s how you’d do a POST request (and the same would work with a GET request):   The first parameter is extra data passed to the post request and the second parameter is a function that handles the success of the POST request. If you’re familiar with jQuery’s Ajax goodness, you’ll know how to use it. (if not, check out http://api.jquery.com/jQuery.Post/ and the parameters are essentially the same). But we still haven’t gotten rid of the magic strings. We still have controller names and action names represented as strings. This is going to blow your mind… If you’ve seen T4MVC, this will look familiar. We’re essentially doing the same sort of thing with my JavaScript router, but we’re porting the concept to JavaScript. The good news is that parameters to the controllers are directly reflected in the action function, just like T4MVC. And the even better news… IntlliSense is easily transferred to the JavaScript version if you’re using Visual Studio as your JavaScript editor. The additional data parameter gives you the ability to pass extra routing data to the URL formatter.   About the Magic You may be wondering how this all work. It’s actually quite simple. I’ve built a simple jQuery pluggin (called routeManager) that hangs off the main jQuery namespace and routes all the URLs. Every time your solution builds, a routing file will be generated with this pluggin, all your route and controller definitions along with your documentation. Then by the power of Visual Studio, you get some really slick IntelliSense that is hard to live without. But there are a few steps you have to take before this whole thing is going to work. First and foremost, you need a reference to the JsRouting.Core.dll to your projects containing controllers or routes. Second, you have to specify your routes in a bit of a non-standard way. See, we can’t just pull routes out of your App_Start in your Global.asax. We force you to build a route source like this: The way we determine the routes is by pulling in all RouteSources and generating routes based upon the mapped routes. There are various reasons why we can’t use RouteCollection (different post for another day)… but in this case, you get the same route mapping experience. Converting the RouteSource to a RouteCollection is trivial (there’s an extension method for that). Next thing you have to do is generate a documentation XML file. This is done by going to the project settings, going to the build tab and clicking the checkbox. (this isn’t required, but nice to have). The final thing you need to do is hook up the generation mechanism. Pop open your project file and look for the AfterBuild step. Now change the build step task to look like this: The “PathToOutputExe” is the path to the JsRouting.Output.exe file. This will change based on where you put the EXE. The “PathToOutputJs” is a path to the output JavaScript file. The “DicrectoryOfAssemblies” is a path to the directory containing controller and routing DLLs. The JsRouting.Output.exe executable pulls in all these assemblies and scans them for controllers and route sources.   Now that wasn’t too bad, was it :)   The State of the Project This is definitely not complete… I have a lot of plans for this little project of mine. For starters, I need to look at the generation mechanism. Either I will be creating a utility that will do the project file manipulation or I will go a different direction. I’d like some feedback on this if you feel partial either way. Another thing I don’t support currently is areas. While this wouldn’t be too hard to support, I just don’t use areas and I wanted something up quickly (this is, after all, for a current project of mine). I’ll be adding support shortly. There are a few things that I haven’t covered in this post that I will most certainly be covering in another post, such as routing constraints and how these will be translated to JavaScript. I decided to open source this whole thing, since it’s a nice little utility I think others should really be using. Currently we’re using ASP.NET MVC 2, but it should work with MVC 3 as well. I’ll upgrade it as soon as MVC 3 is released. Along those same lines, I’m investigating how this could be put on the NuGet feed. Show me the Bits! OK, OK! The code is posted on my GitHub account. Go nuts. Tell me what you think. Tell me what you want. Tell me that you hate it. All feedback is welcome! https://github.com/zowens/ASP.NET-MVC-JavaScript-Routing

    Read the article

  • .NET to iOS: From WinForms to the iPad

    - by RobertChipperfield
    One of the great things about working at Red Gate is getting to play with new technology - and right now, that means mobile. A few weeks ago, we decided that a little research into the tablet computing arena was due, and purely from a numbers point of view, that suggested the iPad as a good target device. A quick trip to iPhoneDevCon in San Diego later, and Marine and I came back full of ideas, and with some concept of how iOS development was meant to work. Here's how we went from there to the release of Stacks & Heaps, our geeky take on the classic "Snakes & Ladders" game. Step 1: Buy a Mac I've played with many operating systems in my time: from the original BBC Model B, through DOS, Windows, Linux, and others, but I'd so far managed to avoid buying fruit-flavoured computer hardware! If you want to develop for the iPhone, iPad or iPod Touch, that's the first thing that needs to change. If you've not used OS X before, the first thing you'll realise is that everything is different! In the interests of avoiding a flame war in the comments section, I'll only go so far as to say that a lot of my Windows-flavoured muscle memory no longer worked. If you're in the UK, you'll also realise your keyboard is lacking a # key, and that " and @ are the other way around from normal. The wonderful Ukelele keyboard layout editor restores some sanity here, as long as you don't look at the keyboard when you're typing. I couldn't give up the PC entirely, but a handy application called Synergy comes to the rescue - it lets you share a single keyboard and mouse between multiple machines. There's a few limitations: Alt-Tab always seems to go to the Mac, and Windows 7's UAC dialogs require the local mouse for security reasons, but it gets you a long way at least. Step 2: Register as an Apple Developer You can register as an Apple Developer free of charge, and that lets you download XCode and the iOS SDK. You also get the iPhone / iPad emulator, which is handy, since you'll need to be a paid member before you can deploy your apps to a real device. You can either enroll as an individual, or as a company. They both cost the same ($99/year), but there's a few differences between them. If you register as a company, you can add multiple developers to your team (all for the same $99 - not $99 per developer), and you get to use your company name in the App Store. However, you'll need to send off significantly more documentation to Apple, and I suspect the process takes rather longer than for an individual, where they just need to verify some credit card details. Here's a tip: if you're registering as a company, do so as early as possible. The approval process can take a while to complete, so get the application in in plenty of time. Step 3: Learn to love the square brackets! Objective-C is the language of the iPad. C and C++ are also supported, and if you're doing some serious game development, you'll probably spend most of your time in C++ talking OpenGL, but for forms-based apps, you'll be interacting with a lot of the Objective-C SDK. Like shifting from Ctrl-C to Cmd-C, it feels a little odd at first, with the familiar string.format(.) turning into: NSString *myString = [NSString stringWithFormat:@"Hello world, it's %@", [NSDate date]]; Thankfully XCode's auto-complete is normally passable, if not up to Visual Studio's standards, which coupled with a huge amount of content on Stack Overflow means you'll soon get to grips with the API. You'll need to get used to some terminology changes, though; here's an incomplete approximation: Coming from a .NET background, there's some luxuries you no longer have developing Objective C in XCode: Generics! Remember back in .NET 1.1, when all collections were just objects? Yup, we're back there now. ReSharper. Or, more generally, very much refactoring support. The not-many-keystrokes to rename a class, its file, and al references to it in Visual Studio turns into a much more painful experience in XCode. Garbage collection. This is actually rather less of an issue than you might expect: if you follow the rules, the reference counting provided by Objective C gets you a long way without too much pain. Circular references are their usual problematic self, though. Decent exception handling. You do have exceptions, but they're nowhere near as widely used. Generally, if something goes wrong, you get nil (see translation table above) back. Which brings me on to. Calling a method on a nil object isn't a failure - it just returns nil itself! There's many arguments for and against this, but personally I fall into the "stuff should fail as quickly and explicitly as possible" camp. Less specifically, I found that there's more chance of code failing at runtime rather than getting caught at compile-time: using the @selector(.) syntax to pass a method signature isn't (can't be) checked at compile-time, so the first you know about a typo is a crash when you try and call it. The solution to this is of course lots of great testing, both automated and manual, but I still find comfort in provably correct type safety being enforced in addition to testing. Step 4: Submit to the App Store Assuming you want to distribute to more than a handful of devices, you're going to need to submit your app to the Apple App Store. There's a few gotchas in terms of getting builds signed with the right certificates, and you'll be bouncing around between XCode and iTunes Connect a fair bit, but eventually you get everything checked off the to-do list, and are ready to upload your first binary! With some amount of anticipation, I pressed the Upload button in XCode, ready to release our creation into the world, but was instead greeted by an error informing me my XML file was malformed. Uh. A little Googling later, and it turned out that a simple rename from "Stacks&Heaps.app" to "StacksAndHeaps.app" worked around an XML escaping bug, and we were good to go. The next step is to wait for approval (or otherwise). After a couple of weeks of intensive development, this part is agonising. Did we make it? The Apple jury is still out at the moment, but our fingers are firmly crossed! In the meantime, you can see some screenshots and leave us your email address if you'd like us to get in touch when it does go live at the MobileFoo website. Step 5: Profit! Actually, that wasn't the idea here: Stacks & Heaps is free; there's no adverts, and we're not going to sell all your data either. So why did we do it? We wanted to get an idea of what it's like to move from coding for a desktop environment, to something completely different. We don't know whether in a year's time, the iPad will still be the dominant force, or whether Android will have smoothed out some bugs, tweaked the performance, and polished the UI, but I think it's a fairly sure bet that the tablet form factor is here to stay. We want to meet people who are using it, start chatting to them, and find out about some of the pain they're feeling. What better way to do that than do it ourselves, and get to write a cool game in the process?

    Read the article

  • Windows Azure Myths

    - by BuckWoody
    Windows Azure is part of the Microsoft "stack" - the suite of software and services we offer. Because we have so many products in almost every part of technology, it's hard to know everything about all parts of what we do - even for those of us who work here. So it's no surprise that some folks are not as familiar with Windows and SQL Azure as they are, say Windows Server or XBox. As I chat with folks about a solution for a business or organization need, I put Windows Azure into the mix. I always start off with "What do you already know about Windows Azure?" so that I don't bore folks with information they already have. I some cases they've checked out the product ahead of time and have specific questions, in others they aren't as familiar, and in still others there is a fair amount of mis-information. Sometimes that's because of a marketing failure, sometimes it's hearsay, and somtetimes it's active misinformation. I thought I might lay out a few of these misconceptions. As always - do your fact-checking! Never take anyone's word alone (including mine) as gospel. Make sure you educate yourself on your options. Your company or your clients depend on you to have the right information on IT, so make sure you live up to that. Myth 1: Nobody uses Windows Azure It's true that we don't give out numbers on the amount of clients on Windows and SQL Azure. But lots of folks are here - companies you may have heard of like Boeing, NASA, Fujitsu, The City of London, Nuedesic, and many others. I deal with firms small and large that use Windows Azure for mission-critical applications, sometimes totally on Windows and/or SQL Azure, sometimes in conjunction with an on-premises system, sometimes for only a specific component in Windows Azure like storage. The interesting thing is that many sites you visit have a Windows Azure component, or are running on Windows Azure. They just don't announce it. Just like the other cloud providers, the companies have asked to be completely branded themselves - they don't want you to be aware or care that they are on Windows Azure. Sometimes that's for security, other times it's for different reasons. It's just like the web sites you visit. For the most part, they don't advertise which OS or Web Server they use. It really just shouldn't matter. The point is that they just use what works to solve a given problem. Check out a few public case studies here: https://www.windowsazure.com/en-us/home/case-studies/ Myth 2: It's only for Microsoft stuff - can't use Open Source This is the one I face the most, and am the most dismayed by. We work just fine with many open source products, including Java, NodeJS, PHP, Ruby, Python, Hadoop, and many other languages and applications. You can quickly deploy a Wordpress, Umbraco and other "kits". We have software development kits (SDK's) for iPhones, iPads, Android, Windows phones and more. We have an SDK to work with FaceBook and other social networks. In short, we play well with others. More on the languages and runtimes we support here: https://www.windowsazure.com/en-us/develop/overview/ More on the SDK's here: http://www.wadewegner.com/2011/05/windows-azure-toolkit-for-ios/, http://www.wadewegner.com/2011/08/windows-azure-toolkits-for-devices-now-with-android/, http://azuretoolkit.codeplex.com/ Myth 3: Microsoft expects me to switch everything to "the cloud" No, we don't. That would be disasterous, unless the only things you run in your company uses works perfectly in Azure. Use Windows Azure  - or any cloud for that matter - where it works. Whenever I talk to companies, I focus on two things: Something that is broken and needs to be re-architected Something you want to do that is new If something is broken, and you need new tools to scale, extend, add capacity dynamically and so on, then you can consider using Windows or SQL Azure. It can help solve problems that you have, or it may include a component you don't want to write or architect yourself. Sometimes you want to do something new, like extend your company's offerings to mobile phones, to the web, or to a social network. More info on where it works here: http://blogs.msdn.com/b/buckwoody/archive/2011/01/18/windows-azure-and-sql-azure-use-cases.aspx Myth 4: I have to write code to use Windows and SQL Azure If Windows Azure is a PaaS - a Platform as a Service - then don't you have to write code to use it? Nope. Windows and SQL Azure are made up of various components. Some of those components allow you to write and deploy code (like Compute) and others don't. We have lots of customers using Windows Azure storage as a backup, to securely share files instead of using DropBox, to distribute videos or code or firmware, and more. Others use our High Performance Computing (HPC) offering to rent a supercomputer when they need one. You can even throw workloads at that using Excel! In addition there are lots of other components in Windows Azure you can use, from the Windows Azure Media Services to others. More here: https://www.windowsazure.com/en-us/home/scenarios/saas/ Myth 5: Windows Azure is just another form of "vendor lock-in" Windows Azure uses .NET, OSS languages and standard interfaces for the code. Sure, you're not going to take the code line-for-line and run it on a mainframe, but it's standard code that you write, and can port to something else. And the data is yours - you can bring it back whever you want. It's either in text or binary form, that you have complete control over. There are no licenses - you can "pay as you go", and when you're done, you can leave the service and take all your code, data and IP with you.   So go out there, read up, try it. Use it where it works. And don't believe everything you hear - sometimes the Internet doesn't get it all correct. :)

    Read the article

  • External usb 3.0 hard drive is not recognised when plugged into usb 3 port (ubuntu natty 64 bit).

    - by kimangroo
    I have an Iomega Prestige Portable External Hard Drive 1TB USB 3.0. It works fine on windows 7 as a usb 3.0 drive. It isn't detected on ubuntu natty 64bit, 2.6.38-8-generic. fdisk -l cannot see it at all: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1bed746b Device Boot Start End Blocks Id System /dev/sda1 1 1689 13560832 27 Unknown /dev/sda2 * 1689 1702 102400 7 HPFS/NTFS /dev/sda3 1702 19978 146805760 7 HPFS/NTFS /dev/sda4 19978 60802 327914497 5 Extended /dev/sda5 25555 60802 283120640 7 HPFS/NTFS /dev/sda6 19978 23909 31571968 83 Linux /dev/sda7 23909 25555 13218816 82 Linux swap / Solaris Partition table entries are not in disk order lsusb can see it: Bus 003 Device 003: ID 059b:0070 Iomega Corp. Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 004: ID 05fe:0011 Chic Technology Corp. Browser Mouse Bus 002 Device 003: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 0489:e00f Foxconn / Hon Hai Bus 001 Device 004: ID 0c45:64b5 Microdia Bus 001 Device 003: ID 08ff:168f AuthenTec, Inc. Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub And dmesg | grep -i xhci (I may have unplugged the drive and plugged it back in again after booting): [ 1.659060] pci 0000:04:00.0: xHCI HW did not halt within 2000 usec status = 0x0 [ 11.484971] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 11.484997] xhci_hcd 0000:04:00.0: setting latency timer to 64 [ 11.485002] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 11.485064] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 [ 11.636149] xhci_hcd 0000:04:00.0: irq 18, io mem 0xc5400000 [ 11.636241] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X [ 11.636246] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X [ 11.636251] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X [ 11.636256] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X [ 11.636261] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X [ 11.639654] xHCI xhci_add_endpoint called for root hub [ 11.639655] xHCI xhci_check_bandwidth called for root hub [ 11.956366] usb 3-1: new SuperSpeed USB device using xhci_hcd and address 2 [ 12.001073] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.007059] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.012932] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.018922] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.049139] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.056754] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.131607] xhci_hcd 0000:04:00.0: WARN no SS endpoint bMaxBurst [ 12.179717] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.686876] xhci_hcd 0000:04:00.0: WARN: babble error on endpoint [ 12.687058] xhci_hcd 0000:04:00.0: WARN Set TR Deq Ptr cmd invalid because of stream ID configuration [ 12.687152] xhci_hcd 0000:04:00.0: ERROR Transfer event for disabled endpoint or incorrect stream ring [ 43.330737] usb 3-1: reset SuperSpeed USB device using xhci_hcd and address 2 [ 43.422579] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 43.422658] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014669af00 [ 43.422665] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014669af40 [ 43.422671] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014669af80 [ 43.422677] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014669afc0 [ 43.531159] xhci_hcd 0000:04:00.0: WARN no SS endpoint bMaxBurst [ 125.160248] xhci_hcd 0000:04:00.0: WARN no SS endpoint bMaxBurst [ 903.766466] usb 3-1: new SuperSpeed USB device using xhci_hcd and address 3 [ 903.807789] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.813530] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.819400] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.825104] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.855067] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.862314] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.862597] xhci_hcd 0000:04:00.0: WARN no SS endpoint bMaxBurst [ 903.913211] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 904.424416] xhci_hcd 0000:04:00.0: WARN: babble error on endpoint [ 904.424599] xhci_hcd 0000:04:00.0: WARN Set TR Deq Ptr cmd invalid because of stream ID configuration [ 904.424700] xhci_hcd 0000:04:00.0: ERROR Transfer event for disabled endpoint or incorrect stream ring [ 935.139021] usb 3-1: reset SuperSpeed USB device using xhci_hcd and address 3 [ 935.226075] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 935.226140] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880148186b00 [ 935.226148] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880148186b40 [ 935.226153] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880148186b80 [ 935.226159] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880148186bc0 [ 935.343339] xhci_hcd 0000:04:00.0: WARN no SS endpoint bMaxBurst I thought it might be that the firmware wasn't compatible with linux or something, but when booting a live image of partedmagic, (2.6.38.4-pmagic), the drive was detected fine, I could mount it and got usb 3.0 speeds (at least they double the speeds I got from plugging same drive in usb 2 ports). dmesg in partedmagic did say something about no SuperSpeed endpoint which was an error I saw in a previous dmesg of ubuntu: Jun 27 15:49:02 (none) user.info kernel: [ 2.978743] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Jun 27 15:49:02 (none) user.debug kernel: [ 2.978771] xhci_hcd 0000:04:00.0: setting latency timer to 64 Jun 27 15:49:02 (none) user.info kernel: [ 2.978781] xhci_hcd 0000:04:00.0: xHCI Host Controller Jun 27 15:49:02 (none) user.info kernel: [ 2.978856] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 Jun 27 15:49:02 (none) user.info kernel: [ 3.089458] xhci_hcd 0000:04:00.0: irq 18, io mem 0xc5400000 Jun 27 15:49:02 (none) user.debug kernel: [ 3.089541] xhci_hcd 0000:04:00.0: irq 42 for MSI/MSI-X Jun 27 15:49:02 (none) user.debug kernel: [ 3.089544] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X Jun 27 15:49:02 (none) user.debug kernel: [ 3.089546] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X Jun 27 15:49:02 (none) user.debug kernel: [ 3.089548] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X Jun 27 15:49:02 (none) user.debug kernel: [ 3.089550] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X Jun 27 15:49:02 (none) user.warn kernel: [ 3.092857] usb usb3: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values Jun 27 15:49:02 (none) user.info kernel: [ 3.092864] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 Jun 27 15:49:02 (none) user.info kernel: [ 3.092866] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 27 15:49:02 (none) user.info kernel: [ 3.092867] usb usb3: Product: xHCI Host Controller Jun 27 15:49:02 (none) user.info kernel: [ 3.092869] usb usb3: Manufacturer: Linux 2.6.38.4-pmagic xhci_hcd Jun 27 15:49:02 (none) user.info kernel: [ 3.092870] usb usb3: SerialNumber: 0000:04:00.0 Jun 27 15:49:02 (none) user.debug kernel: [ 3.092961] xHCI xhci_add_endpoint called for root hub Jun 27 15:49:02 (none) user.debug kernel: [ 3.092963] xHCI xhci_check_bandwidth called for root hub Well I have no idea what's going wrong, and I haven't had much luck from google and the forums so far. A number of unanswered threads with people with similar error messages and problems only. Hopefully someone here can help or point me in the right direction?!

    Read the article

  • Learning content for MCSDs: Web Applications and Windows Store Apps using HTML5

    Recently, I started again to learn for various Microsoft certifications. First candidate on my way to MSCD: Web Applications is the Exam 70-480: Programming in HTML5 with JavaScript and CSS3. Motivation to go for a Microsoft exam I guess, this is quite personal but let me briefly describe my intentions to go that exam. First, I'm doing web development since the 1990's. Working with HTML, CSS and Javascript is happening almost daily in my workspace. And honestly, I do not only do 'pure' web development but already integrated several HTML/CSS/Javascript frontend UIs into an existing desktop application (written in Visual FoxPro) inclusive two-way communication and data exchange. Hm, might be an interesting topic for another blog article here... Second, this exam has a very interesting aspect which is listed at the bottom of the exam's details: Credit Toward Certification When you pass Exam 70-480: Programming in HTML5 with JavaScript and CSS3, you complete the requirements for the following certification(s): Programming in HTML5 with JavaScript and CSS3 Specialist Exam 70-480: Programming in HTML5 with JavaScript and CSS3: counts as credit toward the following certification(s): MCSD: Web Applications MCSD: Windows Store Apps using HTML5 So, passing one single exam will earn you specialist certification straight-forward, and opens the path to higher levels of certifications. Preparations and learning path Well, due to a newsletter from Microsoft Learning (MSL) I caught interest in picking up the circumstances and learning materials for this particular exam. As of writing this article there is a promotional / voucher code available which enables you to register for this exam for free! Simply register yourself with or log into your existing account at Prometric, choose the exam for a testing facility near to you and enter the voucher code HTMLJMP (available through 31.03.2013 or while supplies last). Hurry up, there are restrictions... As stated above, I'm already very familiar with web development and the programming flavours involved into this. But of course, it is always good to freshen up your knowledge and reflect on yourself. Microsoft is putting a lot of effort to attract any kind of developers into the 'App Development'. Whether it is for the Windows 8 Store or the Windows Phone 8 Store, doesn't really matter. They simply need more apps. This demand for skilled developers also comes with a nice side-effect: Lots and lots of material to study. During the first couple of hours, I could easily gather high quality preparation material - again for free! Following is just a small list of starting points. If you have more resources, please drop me a message in the comment section, and I'll be glad to update this article accordingly. Developing HTML5 Apps Jump Start This is an accelerated jump start video course on development of HTML5 Apps for Windows 8. There are six modules that are split into two video sessions per module. Very informative and intense course material. This is packed stuff taken from an official preparation course for exam 70-480. Developing Windows Store Apps with HTML5 Jump Start Again, an accelerated preparation video course on Windows 8 Apps. There are six modules with two video sessions each which will catapult you to your exam. This is also related to preps for exam 70-481. Programming Windows 8 Apps with HTML, CSS, and JavaScript Kraig Brockschmidt delves into the ups and downs of Windows 8 App development over 800+ pages. Great eBook to read, study, and to practice the samples - best of all, it's for free. codeSHOW() This is a Windows 8 HTML/JS project with the express goal of demonstrating simple development concepts for the Windows 8 platform. Code, code and more code... absolutely great stuff to study and practice. Microsoft Virtual Academy I already wrote about the MVA in a previous article. Well, if you haven't registered yourself yet, now is the time. The list is not complete for sure, but this might keep you busy for at least one or even two weeks to go through the material. Please don't hesitate to add more resources in the comment section. Right now, I'm already through all videos once, and digging my way through chapter 4 of Kraig's book. Additional material - Pluralsight Apart from those free online resources, I also following some courses from the excellent library of Pluralsight. They already have their own section for Windows 8 development, but of course, you get companion material about HTML5, CSS and Javascript in other sections, too. Introduction to Building Windows 8 Applications Building Windows 8 Applications with JavaScript and HTML Selling Windows 8 Apps HTML5 Fundamentals Using HTML5 and CSS3 HTML5 Advanced Topics CSS3 etc... Interesting to see that Michael Palermo provides his course material on multiple platforms. Fantastic! You might also pay a visit to his personal blog. Hm, it just came to my mind that Aaron Skonnard of Pluralsight publishes so-called '24 hours Learning Paths' based on courses available in the course library. Would be interested to see a combination for Windows 8 App development using HTML5, CSS3 and Javascript in the future. Recommended workspace environment Well, you might have guessed it but this requires Windows 8, Visual Studio 2012 Express or another flavour, and a valid Developers License. Due to an MSDN subscription I working on VS 2012 Premium with some additional tools by Telerik. Honestly, the fastest way to get you up and running for Windows 8 App development is the source code archive of codeSHOW(). It does not only give you all source code in general but contains a couple of SDKs like Bing Maps, Microsoft Advertising, Live ID, and Telerik Windows 8 controls... for free! Hint: Get the Windows Phone 8 SDK as well. Don't worry, while you are studying the material for Windows 8 you will be able to leverage from this knowledge to development for the phone platform, too. It takes roughly one to two hours to get your workspace and learning environment, at least this was my time frame due to slow internet connection and an aged spare machine. ;-) Oh, before I forget to mention it, as soon as you're done, go quickly to the Windows Store and search for ClassBrowserPlus. You might not need it ad hoc for your development using HTML5, CSS and Javascript but I think that it is a great developer's utility that enables you to view the properties, methods and events (along with help text) for all Windows 8 classes. It's always good to look behind the scenes and to explore how it is made. Idea: Start/join a learning group The way you learn new things or intensify your knowledge in a certain technology is completely up to your personal preference. Back in my days at the university, we used to meet once or twice a week in a small quiet room to exchange our progress, questions and problems we ran into. In general, I recommend to any software craftsman to lift your butt and get out to exchange with other developers. Personally, I like this approach, as it gives you new points of view and an insight into others' own experience with certain techniques and how they managed to solve tricky issues. Just keep it relaxed and not too formal after all, and you might a have a good time away from your dull office desk. Give your machine a break, too.

    Read the article

  • Personal Development : Time, Planning , Repairs & Maintenance

    - by Rajesh Pillai
    Personal Development : Time, Planning, Repairs & Maintenance These are just my thoughts, but some you may find something interesting in it. Please think over it. We may know many things, but still we always keeps procrastinating it. I have written this as I have heard many people coming back and saying they don’t have time to do things they like. These are my thoughts buy may be useful to someone else too. Certain things in life needs periodic repairs and maintenance. To cite some examples , your CAR, your HOUSE, your personal laptop/desktop, your health etc. Likewise there are certain other things in professional life that requires repair/ maintenance /or some kind of polishing, so that you always stay on top of it. But they are not always obvious. Some of them are - Improving your communication skills - Increasing your vocabulary - Upgrading your technical skills - Pursuing your hobby - Increasing your knowledge/awareness etc… etc… And then there are certain things that we are always short of…. one is TIME. We all know TIME is one of the most precious things in life and yet we all are very miserable at managing it. Remember you can only manage it and not control it. You can only control which you own or which you create. In theory time is infinite. So, there should be abundant of it. But remember one thing, you know this, it’s not reversible. Once it has elapsed you cannot live it again. Think over it. So, how do find that golden 25th hour every day. To find the 25th hour you need to reflect back on your current daily activities. Analyze them and see where you are spending most of your time and is it really important. Even the 8 hours that you spent in the office, is it spent fruitfully. At the end of the day is the 8 precious hour that you spent was worth it. Just reflect back on your activities. Did you learn something? If yes did you make a point to NOTE IT. If you didn’t NOTED it then was the time you spent really worth it. Just ponder over it. Some calculations of your daily activities where most of the time is spent. Let’s start (in no particular order though) - Sleep (6.5 hours) [Remember you only require 6 good hours of sleep every day]. Some may thing it is 8, but it’s a myth.   o To achive 6 hours of sleep and be in good health you can practice 15 minutes of daily meditation. So effectively you can    round it to 6.5 hours. - Morning chores(2 hours) : Some may need to prepare breakfast and all other things. - Office commuting (avg. to and fro 3 hours) - Office Work (avg 9.5 hours) Total Hours: 21 hours effective time which is spent irrespective of what you do. There may be some variations here and there. Still you have 3 hours EXTRA. Where do these 3 hours go? If you can find it, then you may get that golden 25th hour out of these 3 hours. Let’s discount 2 hours for contingencies, still you have 1 hour with you. If you can’t find it then you are living a direction less life. As you can see, the 25th Hour lies within the 24 hours of the day. It’s upto each one of us to find and make use of it. Now what can you do with that 25th hour i.e. 1 hour extra of your life. Imagine the possibility. Again some calculations 1 hour daily * 30 days = 30 hours every month 30 hours pm * 12 month = 360 hours every year. 360 hours every year seems very promising. Let’s add some contingencies, say, let’s be optimistic and say 50 % contingency. Still you have 180 hours every year. That leaves with 30 minutes every day of extra time. That’s hell a lot of time, if you could manage it. These may sound like a high talk [yes, it is, unless you apply these simple rules and rationalize your everyday living and stop procrastinating]. NOTE: I haven’t taken weekend, holidays and leaves into account. So, that leaves us with a lot of buffer time. You can meet family friends, relatives, other tasks, and yet have these 180 pure hours of joy every year. Do whatever you want to do with it. So, how important is this 180 hours per year to you? Just think over it. You may use it the way you like - 50 hours [pursue your hobby like drawing, crafting, learn dance, learn juggling, learn swimming, travelling hmm.. anything you like doing and you didn’t had time to do it.] - 30 hours you can learn a new programming language or technology (i.e. you can get comfortable with it) - 50 hours [improve existing skills] - 20 hours [improve you communication skill]. Do some light reading. - 30 hours [YOU DECIDE WHAT TO DO]? So, if you had done this for one year you would have learnt a new programming language, upgraded existing skills, improved you communication etc.. If you had done this for two years.. imagine the level of personal development or growth which you may have attained….. If you had done this for three years….. NOW I think I don’t need to mention this… So, you still have TIME, as they say TIME is infinite. So, make judicious use of this precious thing. And never ever comeback saying “I don’t have time”. So, if you are RICH in TIME, everything else will be automatically taken care of, as those things may just be a byproduct of how you spend your time… So, happy TIMING your TIME everyday.

    Read the article

  • Charms and the App Bar

    - by Dennis Vroegop
    Ok. I admit. I made a mistake in the last post about our planespotter app. I have dedicated a full part of the hub to Social. I also had a section called Friends but that made sense since I said that “Friends” is a special group of people that connect to each other through our app and only our app. Social however is sharing our spots with Twitter, Facebook and so on. Now, we could write that functionality in our app in a different section but there is one small problem with that: users don’t expect that. Ok, I admit. The mistake was quite deliberate to give me an excuse to write this part. But still: the mistake is one I see a lot. People are trying to do stuff in their application that they shouldn’t be doing. This always strike me as slightly odd: why do some work when others have already done it for you and you can just use it? After all: good developers are lazy (lazy people will always try to find the easiest way to do something and in development land this usually means the cleanest and best to support way…) So. What is that part that Microsoft has done for us and we don’t have to do ourselves? The answer lies on the right hand of your Win8 screen: This is a screenshot of my tablet (as you can see I am writing this right now….) When I swipe my finger from out of the screen on the right inside the screen (or move the mouse to the upper right corner) this menu will appear. Next to settings and the start menu button we’ll find the Search and the Share charms. These are two ways that your app can share the information it contains with the rest of the world, or at least: the rest of your system. So don’t write a Search feature in your app. Don’t write a Share feature in your app. It’s here already. Users, once they are used to Windows 8, will use that feature and expect it to work. If it doesn’t, they won’t like your app and you can kiss you dreams of everlasting fame goodbye. So use these two. What are they? Well, simply they are parts of a contract. In your app you say somewhere in code that you are supporting Search and Share. So when the user selects Share the system will interrogate the current app in the foreground if it supports this feature. Your app will say “But why, yes, I do!” Then the system will ask the app “Ok then, wisecrack, then share!” and you will have to provide the system with some information about the format. Other applications have subscribed to be at the receiving end of the Share contract. They have told the system that they support Sharing (receiving) and which formats they understand. If one or more of them support the formats you specify, the user will see them. The user clicks / taps on the app of their choice and data is moved from your app to the new one. So if you say you support Facebook and Twitter users can post data from your app to these networks by selecting Share. The same applies to Search. Don’t make a “search” button in your app but use the contract to tell the system that you support search and use that instead. Users will be grateful (remember that bar with men/women/creatures that are waiting for you?) The more and more people get to know Windows 8, the more they will use this. And if you are one of the people who wrote an app that helped them learn the system, well, that’s even better. So. We don’t have a Share or a Search button. We do have other buttons. Most important: we probably need a “New Spot” button. And a “Filter” might be useful. Or someway to open the camera so you can add a picture to the spot. Where will be put those? The answer is the “Appbar” . This is a application / context aware menu that slides up from the bottom of the screen when you move your finger / mouse from below the screen into it. From above downwards works just as well. Here you see an example of the appbar from the People app. (click on it for a larger version). This appears whenever you slide your finger up from below of down from above. This is where you put your commands. Remember, this is context aware so this menu will change when you are in different parts of your app or when you have selected different items. There are a few conventions when you create this appbar. First, the items on the right are “General” items, meaning they have little to do with what is on the screen right now. I think this would be a great place to add our “New Spot” icon. On the far left are items associated with the current selected item or screen. So if you have a spot selected, the button for Add Photo should be visible here and on the left hand side. Not everything is as clear as this, but this is what you should strive for. Group items together. And please note: this is the only place in Metro design where we are allowed to use lines as separators. So when you want to separate a group of icons from another group, add a line. Also note the simplicity of the buttons. No colors, no lights or shadows, no 3D. After a couple of years of fancy almost realistic looking icons people have finally decided that hey, this is a virtual world: it’s ok to look virtual as well. So make things as readable and clear as possible and don’t try to duplicate nature. It’s all about the information, remember? (If you don’t remember I’d like to point you to a older blog post of mine about the what and why of Metro). So.. think about the buttons a bit and think about Share and Search. What will you put there? Remember: this is the way the users interact with your apps and while you shouldn’t judge a book by its covers when it comes to people, this isn’t entirely so when it comes to apps. People DO judge an app by its looks and the way it feels. Take advantage of that. History has learned that a crappy app with a GREAT user interface gets better reviews than a GREAT app with a lousy UI… I know: developers will find this extremely unfair but that’s the world we live in (No, I am not saying you should deliver rubbish apps). Next time: we’ll start by building the darn thing!

    Read the article

  • Creating an SMF service for mercurial web server

    - by Chris W Beal
    I'm working on a project at the moment, which has a number of contributers. We're managing the project gate (which is stand alone) with mercurial. We want to have an easy way of seeing the changelog, so we can show management what is going on.  Luckily mercurial provides a basic web server which allows you to see the changes, and drill in to change sets. This can be run as a daemon, but as it was running on our build server, every time it was rebooted, someone needed to remember to start the process again. This is of course a classic usage of SMF. Now I'm not an experienced person at writing SMF services, so it took me 1/2 an hour or so to figure it out the first time. But going forward I should know what I'm doing a bit better. I did reference this doc extensively. Taking a step back, the command to start the mercurial web server is $ hg serve -p <port number> -d So we somehow need to get SMF to run that command for us. In the simplest form, SMF services are really made up of two components. The manifest Usually lives in /var/svc/manifest somewhere Can be imported from any location The method Usually live in /lib/svc/method I simply put the script straight in that directory. Not very repeatable, but it worked Can take an argument of start, stop, or refresh Lets start with the manifest. This looks pretty complex, but all it's doing is describing the service name, the dependencies, the start and stop methods, and some properties. The properties can be by instance, that is to say I could have multiple hg serve processes handling different mercurial projects, on different ports simultaneously Here is the manifest I wrote. I stole extensively from the examples in the Documentation. So my manifest looks like this $ cat hg-serve.xml <?xml version="1.0"?> <!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1"> <service_bundle type='manifest' name='hg-serve'> <service name='application/network/hg-serve' type='service' version='1'> <dependency name='network' grouping='require_all' restart_on='none' type='service'> <service_fmri value='svc:/milestone/network:default' /> </dependency> <exec_method type='method' name='start' exec='/lib/svc/method/hg-serve %m' timeout_seconds='2' /> <exec_method type='method' name='stop' exec=':kill' timeout_seconds='2'> </exec_method> <instance name='project-gate' enabled='true'> <method_context> <method_credential user='root' group='root' /> </method_context> <property_group name='hg-serve' type='application'> <propval name='path' type='astring' value='/src/project-gate'/> <propval name='port' type='astring' value='9998' /> </property_group> </instance> <stability value='Evolving' /> <template> <common_name> <loctext xml:lang='C'>hg-serve</loctext> </common_name> <documentation> <manpage title='hg' section='1' /> </documentation> </template> </service> </service_bundle> So the only things I had to decide on in this are the service name "application/network/hg-serve" the start and stop methods (more of which later) and the properties. This is the information I need to pass to the start method script. In my case the port I want to start the web server on "9998", and the path to the source gate "/src/project-gate". These can be read in to the start method. So now lets look at the method scripts $ cat /lib/svc/method/hg-serve #!/sbin/sh # # # Copyright (c) 2012, Oracle and/or its affiliates. All rights reserved. # # Standard prolog # . /lib/svc/share/smf_include.sh if [ -z $SMF_FMRI ]; then echo "SMF framework variables are not initialized." exit $SMF_EXIT_ERR fi # # Build the command line flags # # Get the port and directory from the SMF properties port=`svcprop -c -p hg-serve/port $SMF_FMRI` dir=`svcprop -c -p hg-serve/path $SMF_FMRI` echo "$1" case "$1" in 'start') cd $dir /usr/bin/hg serve -d -p $port ;; *) echo "Usage: $0 {start|refresh|stop}" exit 1 ;; esac exit $SMF_EXIT_OK This is all pretty self explanatory, we read the port and directory using svcprop, and use those simply to run a command in the start case. We don't need to implement a stop case, as the manifest says to use "exec=':kill'for the stop method. Now all we need to do is import the manifest and start the service, but first verify the manifest # svccfg verify /path/to/hg-serve.xml If that doesn't give an error try importing it # svccfg import /path/to/hg-serve.xml If like me you originally put the hg-serve.xml file in /var/svc/manifest somewhere you'll get an error and told to restart the import service svccfg: Restarting svc:/system/manifest-import The manifest being imported is from a standard location and should be imported with the command : svcadm restart svc:/system/manifest-import # svcadm restart svc:/system/manifest-import and you're nearly done. You can look at the service using svcs -l # svcs -l hg-serve fmri svc:/application/network/hg-serve:project-gate name hg-serve enabled false state disabled next_state none state_time Thu May 31 16:11:47 2012 logfile /var/svc/log/application-network-hg-serve:project-gate.log restarter svc:/system/svc/restarter:default contract_id 15749 manifest /var/svc/manifest/network/hg/hg-serve.xml dependency require_all/none svc:/milestone/network:default (online) And look at the interesting properties # svcprop hg-serve hg-serve/path astring /src/project-gate hg-serve/port astring 9998 ...stuff deleted.... Then simply enable the service and if every things gone right, you can point your browser at http://server:9998 and get a nice graphical log of project activity. # svcadm enable hg-serve # svcs -l hg-serve fmri svc:/application/network/hg-serve:project-gate name hg-serve enabled true state online next_state none state_time Thu May 31 16:18:11 2012 logfile /var/svc/log/application-network-hg-serve:project-gate.log restarter svc:/system/svc/restarter:default contract_id 15858 manifest /var/svc/manifest/network/hg/hg-serve.xml dependency require_all/none svc:/milestone/network:default (online) None of this is rocket science, but a bit fiddly. Hence I thought I'd blog it. It might just be you see this in google and it clicks with you more than one of the many other blogs or how tos about it. Plus I can always refer back to it myself in 3 weeks, when I want to add another project to the server, and I've forgotten how to do it.

    Read the article

  • CodePlex Daily Summary for Wednesday, June 15, 2011

    CodePlex Daily Summary for Wednesday, June 15, 2011Popular ReleasesTerraria World Viewer: Version 1.2: Update June 15thNew User Interface Map drawing will not cause the program to freeze anymore Fixed the "Draw Symbols" (now called "Markers") checkbox not having any effectMVC Controls Toolkit: Mvc Controls Toolkit 1.1.5 RC: Added Extended Dropdown allows a prompt item to be inserted as first element. RequiredAttribute, if present, trggers if no element is chosen Client side javascript function to set/get the values of DateTimeInput, TypedTextBox, TypedEditDisplay, and to bind/unbind a "change" handler The selected page in the pager is applied the attribute selected-page="selected" that can be used in the definition of CSS rules to style the selected page items controls now interpret a null value as an empr...Umbraco CMS: Umbraco CMS 5.0 CTP 1: Umbraco 5 Community Technology Preview Umbraco 5 will be the next version of everyone's favourite, friendly ASP.NET CMS that already powers over 100,000 websites worldwide. Try out our first CTP of version 5 today! If you're new to Umbraco and would like to get a quick low-down on our popular and easy-to-learn approach to content management, check out our intro video here. What's in the v5 CTP box? This is a preview version of version 5 and includes support for the following familiar Umbr...Ribbon Browser for Microsoft Dynamics CRM 2011: Ribbon Browser (1.0.514.30): Initial releaseTerrariViewer: TerrariViewer v3.0 [Terraria Inventory Editor]: In this version, I did an overhaul of the GUI of the program. The only pop-up window you will receive now is a warning box for for when you click on the "Delete" button. Everything has been integrated into the tabs on the form. I added every item included with v1.0.4 of Terraria and added the option to set inventory/bank slots to "No Item". This WILL work with characters that have not been opened in v1.0.4patterns & practices: Project Silk: Project Silk Community Drop 11 - June 14, 2011: Changes from previous drop: Many code changes: please see the readme.mht for details. New "Client Data Management and Caching" chapter. Updated "Application Notifications" chapter. Updated "Architecture" chapter. Updated "jQuery UI Widget" chapter. Updated "Widget QuickStart" appendix and code. Guidance Chapters Ready for Review The Word documents for the chapters are included with the source code in addition to the CHM to help you provide feedback. The PDF is provided as a separat...Orchard Project: Orchard 1.2: Build: 1.2.41 Published: 6/14/2010 How to Install Orchard To install Orchard using Web PI, follow these instructions: http://www.orchardproject.net/docs/Installing-Orchard.ashx. Web PI will detect your hardware environment and install the application. Alternatively, to install the release manually, download the Orchard.Web.1.2.41.zip file. http://orchardproject.net/docs/Manually-installing-Orchard-zip-file.ashx The zip contents are pre-built and ready-to-run. Simply extract the contents o...PowerGUI Visual Studio Extension: PowerGUI VSX 1.3.4: Changes - Got rid of suppressed exceptions on assemblies loading at project startup - Fixed Issue #28535 "No Print Support" - Enabled IntelliSence commands wich are supported by ActiPro Syntax Editor control: ToggleBookmark, NextBookmark, PreviousBookmark, ShowMemberList - Added missing Import directives in PS Script project template - Fixed exception occurring on debug start - Fixed an issue: after creating a new PS project, a debugging session hung being run for the second timeSnippet Designer: Snippet Designer 1.4.0: Snippet Designer 1.4.0 for Visual Studio 2010 Change logSnippet Explorer ChangesReworked language filter UI to work better in the side bar. Added result count drop down which lets you choose how many results to see. Language filter and result count choices are persisted after Visual Studio is closed. Added file name to search criteria. Search is now case insensitive. Snippet Editor Changes Snippet Editor ChangesAdded menu option for the $end$ symbol which indicates where the c...SizeOnDisk: 1.0.9.0: Can handle Right-To-Left languages (issue 316) About box (issue 310) New language: Deutsch (thanks to kyoka) Fix: file and folder context menuDropBox Linker: DropBox Linker 1.1: Added different popup descriptions for actions (copy/append/update/remove) Added popup timeout control (with live preview) Added option to overwrite clipboard with the last link only Notification popup closes on user click Notification popup default timeout increased to 3 sec. Added codeplex link to about .NET Framework 4.0 Client Profile requiredWCF Community Site: WCF Express Interop Bindings 1.0: Welcome to the first release of the WCF Express Interop BindingsThis project provides a starter kit for WCF service developers wishing to connect with Java clients in WebSphere, WebLogic, Metro and Apache. It supports security, MTOM and RM features. For more information see the Landing page We welcome your feedback (Topic: Interop Bindings). Please submit any feature requests / bug fixes via the issue tracker. FeaturesVSIX Installer WCF Bindings for Oracle WebLogic, Oracle Metro, IBM WebS...Mobile Device Detection and Redirection: 1.0.4.1: Stable Release 51 Degrees.mobi Foundation is the best way to detect and redirect mobile devices and their capabilities on ASP.NET and is being used on thousands of websites worldwide. We’re highly confident in our software and we recommend all users update to this version. Changes to Version 1.0.4.1Changed the BlackberryHandler and BlackberryVersion6Handler to have equal CONFIDENCE values to ensure they both get a chance at detecting BlackBerry version 4&5 and version 6 devices. Prior to thi...Kouak - HTTP File Share Server: Kouak Beta 3 - Clean: Some critical bug solved and dependecy problems There's 3 package : - The first, contains the cli server and the graphical server. - The second, only the cli server - The third, only the graphical client. It's a beta release, so don't hesitate to emmit issue ;pRawr: Rawr 4.1.06: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr AddonWe now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including bag and bank items) like Char...AcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta6: ??AcDown?????????????,?????????????,????、????。?????Acfun????? ????32??64? Windows XP/Vista/7 ????????????? ??:????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64),?????"?????????"??? ??v3.0 Beta6 ?????(imanhua.com)????? ???? ?? ??"????","?????","?????","????"?????? "????"?????"????????"?? ??????????? ?????????????? ?????????????/???? ?? ????Windows 7???????????? ????????? ?? ????????????? ???????/??????????? ???????????? ?? ?? ?????(imanh...Pulse: Pulse Beta 2: - Added new wallpapers provider http://wallbase.cc. Supports english search, multiple keywords* - Improved font rendering in Options window - Added "Set wallpaper as logon background" option* - Fixed crashes if there is no internet connection - Fixed: Rewalls downloads empty images sometimes - Added filters* Note 1: wallbase provider supports only english search. Rewalls provider supports only russian search but Pulse automatically translates your english keyword into russian using Google Tr...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.7: Version: 2.0.0.7 (Milestone 7): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...SimplePlanner: v2.0b: For 2011-2012 Sem 1 ???2011-2012 ????Visual Studio 2010 Help Downloader: 1.0.0.3: Domain name support for proxy Cleanup old packages bug Writing to EventLog with UAC enabled bug Small fixes & RefactoringNew Projects360U: 360UAd Configuration + Rotator for Windows Phone: Ad Configuration and Rotator for Windows Phone is a set of classes and controls which allow you to remotely manage advertising providers used inside your Windows Phone application. Advertising providers can be plugged in on an 'as needed' so application only ship with the providers being used.CommerceShopSystem: CommerceShopSystemContour strikes again: Collection of extensions for the Umbraco Contour form builderFarseer Physics & GLEED2D Link: This project includes c# files usable to implement the Farseer Physics engine in a level created using GLEED2D.FolderComparer: This DLL holds an extension of the DirectoryInfo class. It contains a logic that helps compare the contents of two folders. HierList Hierarchial Outline ASP.NET Server Control ( using UL or OL and LI ): The HierList ASP WebControl generates a hierarchial list using the UL, OL, and LI html tags. Images Organizator: A C# .Net program that organizes all pictures in a folder by date.KiggDemo: i study kiggLavieOrnamentos: LavieOrnamentos is a MVC project written in C# for a standard business website. I plan to use it as a base for a bigger project, a standard business site framework targeting small companies that just want to display their products and latest news.Multiple Choice Training Application: This is an ASP.Net (VB.Net) Web based training application. This application can be configured to ask multiple choice questions for multiple groups, score based on percentage, create completion certificates and be completely managed via a web interface,Orchard Windows Authentication: This module allows Windows domain users to be authenticated in Orchard.Party Estimator: Party Estimator is a training project based on requirements from O'Reilly's _Head First C#_, and is not intended for widespread use. SharePoint Enforcer - Ensuring large sites comply with standards: SharePoint Enforcer is a utility that aids in governance of large SharePoint sites to ensure that the sites comply with various business rules that have been created to keep the site from growing out of control.SharePoint WarmUp Tool (Claims+FBA): This tools is for warming up (waking) SharPoint sites. It addresses the issue of a 403 forbidden error when the SharePoint web app is in claims mode and FBA. It uses Windows authentication to warm up the sites and bypasses the FBA login redirection causing the 403 forbidden error.Super Mario Limitless: Super Mario Limitless is an in-production Super Mario level engine. It allows you to play your own levels and worlds, play others' levels and worlds, and even play online. With limitless features, you'll spend hours playing and creating.VB.NET ASP.NET MVC 2 - Music Store: This project is a port using the VB language with ASP.NET MVC 2 of the MusicStore application that can be found at : http://mvcmusicstore.codeplex.com/ Veni, Vedi, Velcro...: A personal phone 7 social media app that shows basic elements of design, ad model, panorama etc.XMLServiceMonitor: A Windows service (VB.Net) that allows the monitoring of failure of Servers, Services, Applications, Scheduled Tasks and SQL Jobs. The service is configurable with simple XML files and sends out email notifications of failures.

    Read the article

  • FTP Publishing with the new Windows Azure Release

    - by Harish Ranganathan
    There is a good chance you might have stumbled upon the new Windows Azure Release that we made on June 6th.  Scott Guthrie’s Post quite summarizes the overall new features. One of my favorite features is the Windows Azure Websites and the ability to do publish files to Azure using your FTP Client. Windows Azure Websites offers low cost (free upto 10 websites) web hosting where you can deploy any website that can run on IIS 7.0, quickly. The earlier releases of Azure SDKs and the Azure platform support .NET 3.5 & above for running your applications.  This was a constraint for many since there are/were a lot of ASP.NET 2.0 applications built over time and simply to put it on Azure, many of you were skeptical to migrate it to .NET 4. Windows Azure Websites offer the flexibility of running IIS 7.0 supported .NET Versions which means you can run .NET 1.1, 2.0, 3.5 and .NET 4.  Not just that! You can also run classic ASP Applications. Windows Azure Websites don’t need you to go through the complexity of adding the Cloud Project Template and then publishing the Configuration Files.  Lets take a step by step understanding of Websites and publishing using FTP. I downloaded the Club Website Starter Kit from http://www.asp.net/downloads/starter-kits/club It also requires a database and I downloaded the SQL Scripts and created a SQL Server Database called Club. This installs a Web Site Project Template.  Note that I am running Windows 8 Release Preview and Visual Studio 2012 RC.  After installing the template, select File – New – Website and don’t forget to choose the Framework version as .NET 2.0 You can see the “Club Website Starter Kit” .  Once you select the Website gets created.  You would encounter a warning indicating that the Club Website Starter Kit uses SQL Express and the recommended database is LocalDB Express.  Click ok to continue.  Once the Website is created open up the Web.config and locate the “ClubSiteDB” connection string.  By default, it points to a SQL Express Database.  Instead configure it to use your local SQL Server. Also, open up Global.asax and comment out the following line if (!Roles.RoleExists("Administrators")) Roles.CreateRole("Administrators"); There seems to be an issue in the code that doesn’t create the role.  Post that, hit CTRL+F5 and you should be able to see the Website Running, as below So, now we have the Club Starter Kit site up running locally.  Moving to Azure Visit http://manage.windowsazure.com/ and sign up for a trial account.  This allows you to host up to 10 websites for free and a host of other benefits.  The free Websites can be extended to an year without any charge.  Once you have signed up, sign in to the portal using the Live ID used for sign up. After signing in, you would be presented with the “All Items” listing page which lists, Websites, Cloud Services, Databases etc.,  If this is the first time, you wouldn’t find anything. Click on the “Websites” link from the left menu.  Click on “New” in the bottom and it should show up a dialog.  In the same, select Website and click on “Quick Create” and in the URL Textbox, specify “MyFirstDemo” and click the “Create Web Site” link below. It should take a few seconds to create the Website.  Once the Website is created, click on the listing and it should open up the Dashboard.  Since we haven’t done anything yet, there shouldn’t be any statistics Click on the “Download publish profile” link in the right bottom.  This file has the FTP publishing settings. Also, if you scroll down you can see the FTP URL for this site.  It should typically start ftp://waws-xxxx-xxx-xxxx In the downloaded publish profile file, you can also find the ftp URL.  Pick the following from this file publishUrl (the 2nd one, the one that features after publishMethod =”FTP”) and the userName and userPWD that follows. Note that we have everything required to publish the files.  But since the Club Starter Kit uses Databases, we need to have the Database running on SQL Azure.  Go back to the Main Menu and click on “New” in the bottom but this time select “SQL Database” and provide “Club” as Database name for “Quick Create” If this is the first time a Server would be created.  Otherwise, it would pickup the existing server name. Once the database is created, you can use the SQL Azure Migration Wizard http://sqlazuremw.codeplex.com/ and provide the credentials to connect to local database and then the SQL Azure database for migrating the “Club” database.  The migration wizard UI hasn’t changed much and is the same as explained by me in one my posts earlier http://geekswithblogs.net/ranganh/archive/2009/09/29/taking-your-northwind-database-to-sql-azure-and-binding-it.aspx Once the database is migrated, come back to the main screen and click on the Database base in the Azure Management Portal.  It opens up the dashboard of the database.  Click on “Show connection Strings” and it would popup a list of connection string formats.  Choose the ADO.NET connection string and after editing the password with the password that you provided when creating the database server in the Azure Portal, paste it into the config file of the Club Starter Kit Website.  Just to reiterate, the connection string key is ClubSiteDB. Try running the Website once to ensure that the application though running locally could connect to the SQL Database running on Azure. Once you are able to run the website successfully, we are all set to do the FTP Publishing. Download your favorite FTP tool.  I use http://filezilla-project.org/ In the Host Textbox, paste the FTP URL that you picked up from the publish profile file and also paste the username and password.  Click on “QuickConnect”.  If everything is fine, you should be able to connect to the remote server.  If it is successfully connected, you can see the wwwroot folder of the Website, running in Azure Make sure on the “Local Site” in the left, you choose the path to the folder of your Website.  Open up the Website folder on the left such that it lists all the files and folders inside.  Select all of them and click select “Upload” or simply drag and drop all the files to the root folder that is listed above.  Once the publishing is done, you should be able to hit the SiteURL that you can find the dashboard page of the website.  In our case, it would be http://MyFirstDemo.azurewebsites.net That’s it, we have now done FTP publishing in Azure and that too we are running a .NET 2.0 Website on Azure. Cheers !!!

    Read the article

  • In Case You Weren’t There: Blogwell NYC

    - by Mike Stiles
    0 0 1 1009 5755 Vitrue 47 13 6751 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman";} Your roving reporter roved out to another one of Socialmedia.org’s fantastic Blogwell events, this time in NYC. As Central Park and incredible weather beckoned, some of the biggest brand names in the world gathered to talk about how they’re incorporating social into marketing and CRM, as well as extending social across their entire organizations internally. Below we present a collection of the live tweets from many of the key sessions GE @generalelectricJon Lombardo, Leader of Social Media COE How GE builds and extends emotional connections with consumers around health and reaps the benefits of increased brand equity in the process. GE has a social platform around Healthyimagination to create better health for people. If you and a friend are trying to get healthy together, you’ll do better. Health is inherently. Get health challenges via Facebook and share with friends to achieve goals together. They’re creating an emotional connection around the health context. You don’t influence people at large. Your sphere of real influence is around 5-10 people. They find relevant conversations about health on Twitter and engage sounding like a friend, not a brand. Why would people share on behalf of a brand? Because you tapped into an activity and emotion they’re already having. To create better habits in health, GE gave away inexpensive, relevant gifts related to their goals. Create the context, give the relevant gift, get social acknowledgment for giving it. What you get when you get acknowledgment for your engagement and gift is user generated microcontent. GE got 12,000 unique users engaged and 1400 organic posts with the healthy gift campaign. The Dow Chemical Company @DowChemicalAbby Klanecky, Director of Digital & Social Media Learn how Dow Chemical is finding, training, and empowering their scientists to be their storytellers in social media. There are 1m jobs coming open in science. Only 200k are qualified for them. Dow Chemical wanted to use social to attract and talk to scientists. Dow Chemical decided to use real scientists as their storytellers. Scientists are incredibly passionate, the key ingredient of a great storyteller. Step 1 was getting scientists to focus on a few platforms, blog, Twitter, LinkedIn. Dow Chemical social flow is Core Digital Team - #CMs – ambassadors – advocates. The scientists were trained in social etiquette via practice scenarios. It’s not just about sales. It’s about growing influence and the business. Dow Chemical trained about 100 scientists, 55 are active and there’s a waiting list for the next sessions. In person social training produced faster results and better participation. Sometimes you have to tell pieces of the story instead of selling your execs on the whole vision. Social Media Ethics Briefing: Staying Out of TroubleAndy Sernovitz, CEO @SocialMediaOrg How do we get people to share our message for us? We have to have their trust. The difference between being honest and being sleazy is disclosure. Disclosure does not hurt the effectiveness of your marketing. No one will get mad if you tell them up front you’re a paid spokesperson for a company. It’s a legal requirement by the FTC, it’s the law, to disclose if you’re being paid for an endorsement. Require disclosure and truthfulness in all your social media outreach. Don’t lie to people. Monitor the conversation and correct misstatements. Create social media policies and training programs. If you want to stay safe, never pay cash for social media. Money changes everything. As soon as you pay, it’s not social media, it’s advertising. Disclosure, to the feds, means clear, conspicuous, and understandable to the average reader. This phrase will keep you in the clear, “I work for ___ and this is my personal opinion.” Who are you? Were you paid? Are you giving an honest opinion based on a real experience? You as a brand are responsible for what an agency or employee or contactor does in your behalf. SocialMedia.org makes available a Disclosure Best Practices Toolkit. Socialmedia.org/disclosure. The point is to not ethically mess up and taint social media as happened to e-mail. Not only is the FTC cracking down, so is Google and Facebook. Visa @VisaNewsLucas Mast, Senior Business Leader, Global Corporate Social Media Visa built a mobile studio for the Olympics for execs and athletes. They wanted to do postcard style real time coverage of Visa’s Olympics sponsorships, and on a shoestring. Challenges included Olympic rules, difficulty getting interviews, time zone trouble, and resourcing. Another problem was they got bogged down with their own internal approval processes. Despite all the restrictions, they created and published a variety of and fair amount of content. They amassed 1000+ views of videos posted to the Visa Communication YouTube channel. Less corporate content yields more interest from media outlets and bloggers. They did real world video demos of how their products work in the field vs. an exec doing a demo in a studio. Don’t make exec interview videos dull and corporate. Keep answers short, shoot it in an interesting place, do takes until they’re comfortable and natural. Not everything will work. Not everything will get a retweet. But like the lottery, you can’t win if you don’t play. Promoting content is as important as creating it. McGraw-Hill Companies @McGrawHillCosPatrick Durando, Senior Director of Global New Media McGraw-Hill has 26,000 employees. McGraw-Hill created a social intranet called Buzz. Intranets create operational efficiency, help product dev, facilitate crowdsourcing, and breaks down geo silos. Intranets help with talent development, acquisition, retention. They replaced the corporate directory with their own version of LinkedIn. The company intranet has really cut down on the use of email. Long email threats become organized, permanent social discussions. The intranet is particularly useful in HR for researching and getting answers surrounding benefits and policies. Using a profile on your company intranet can establish and promote your internal professional brand. If you’re going to make an intranet, it has to look great, work great, and employees are going have to want to go there. You can’t order them to like it. 

    Read the article

  • HTML5 Input type=date Formatting Issues

    - by Rick Strahl
    One of the nice features in HTML5 is the abililty to specify a specific input type for HTML text input boxes. There a host of very useful input types available including email, number, date, datetime, month, number, range, search, tel, time, url and week. For a more complete list you can check out the MDN reference. Date input types also support automatic validation which can be useful in some scenarios but maybe can get in the way at other times. One of the more common input types, and one that can most benefit of a custom UI for selection is of course date input. Almost every application could use a decent date representation and HTML5's date input type seems to push into the right direction. It'd be nice if you could just say:<form action="DateTest.html"> <label for="FromDate">Enter a Date:</label> <input type="date" id="FromDate" name="FromDate" value="11/08/2012" class="date" /> <hr /> <input type="submit" id="btnSubmit" name="btnSubmit" value="Save Date" class="smallbutton" /> </form> but if you'd expect to just work, you're likely to be pretty disappointed. Problem #1: Browser Support For starters there's browser support. Out of the major browsers only the latest versions of WebKit and Opera based browsers seem to support date input. Neither FireFox, nor any version of Internet Explorer (including the new touch enabled IE10 in Windows RT) support input type=date. Browser support is an issue, but it would be OK if it wasn't for problem #2. Problem #2: Date Formatting If you look at my date input from before:<input type="date" id="FromDate" name="FromDate" value="11/08/2012" class="date" /> You can see that my date is formatted in local date format (ie. en-us). Now when I run this sadly the form that comes up in Chrome (and also iOS mobile browsers) comes up like this: Chrome isn't recognizing my local date string. Instead it's expecting my date format to be provided in ISO 8601 format which is: 2012-11-08 So if I change the date input field to:<input type="date" id="FromDate" name="FromDate" value="2012-10-08" class="date" /> I correctly get the date field filled in: Also when I pick a date with the DatePicker the date value is also returned is also set to the ISO date format. Yet notice how the date is still formatted to the local date time format (ie. en-US format). So if I pick a new date: and then save, the value field is set back to: 2012-11-15 using the ISO format. The same is true for Opera and iOS browsers and I suspect any other WebKit style browser and their date pickers. So to summarize input type=date: Expects ISO 8601 format dates to display intial values Sets selected date values to ISO 8601 Now what? This would sort of make sense, if all browsers supported input type=date. It'd be easy because you could just format dates appropriately when you set the date value into the control by applying the appropriate culture formatting (ie. .ToString("yyyy-MM-dd") ). .NET is actually smart enough to pick up the date on the other end for modelbinding when ISO 8601 is used. For other environments this might be a bit more tricky. input type=date is clearly the way to go forward. Date controls implemented in HTML are going the way of the dodo, given the intricacies of mobile platforms and scaling for both desktop and mobile. I've been using jQuery UI Datepicker for ages but once going to mobile, that's no longer an option as the control doesn't scale down well for mobile apps (at least not without major re-styling). It also makes a lot of sense for the browser to provide this functionality - creating a consistent date input experience across apps only makes sense, which is why I find it baffling that neither FireFox nor IE 10 deign it necessary to support date input natively. The problem is that a large number of even the latest and greatest browsers don't support this. So now you're stuck with not knowing what date format you have to serve since neither the local format, nor the ISO format works in all cases. For my current app I just broke down and used the ISO format and so I'll live with the non-local date format. <input type="date" id="ToDate" name="ToDate" value="2012-11-08" class="date"/> Here's what this looks like on Chrome: Here's what it looks like on my iPhone: Both Chrome and the phone do this the way it should be. For the phone especially this demonstrates why we'd want this - the built-in date picker there certainly beats manually trying to edit the date using finger gymnastics, and it's one of the easiest ways to pick a date I can think of (ie. easier to use than your typical date picker). Finally here's what the date looks like in FireFox: Certainly this is not the ideal date format, but it's clear enough I suppose. If users enter a date in local US format and that works as well (but won't work for other locales). It'll have to do. Over time one can only hope that other browsers will finally decide to implement this functionality natively to provide a unique experience. Until then, incomplete solutions it is. Related Posts Html 5 Input Types - How useful is this really going to be?© Rick Strahl, West Wind Technologies, 2005-2012Posted in HTML5  HTML   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Microsoft and the open source community

    - by Charles Young
    For the last decade, I have repeatedly, in my imitable Microsoft fan boy style, offered an alternative view to commonly held beliefs about Microsoft's stance on open source licensing.  In earlier times, leading figures in Microsoft were very vocal in resisting the idea that commercial licensing is outmoded or morally reprehensible.  Many people interpreted this as all-out corporate opposition to open source licensing.  I never read it that way. It is true that I've met individual employees of Microsoft who are antagonistic towards FOSS (free and open source software), but I've met more who are supportive or at least neutral on the subject.  In any case, individual attitudes of employees don't necessarily reflect a corporate stance.  The strongest opposition I've encountered has actually come from outside the company.  It's not a charitable thought, but I sometimes wonder if there are people in the .NET community who are opposed to FOSS simply because they believe, erroneously, that Microsoft is opposed. Here, for what it is worth, are the points I've repeated endlessly over the years and which have often been received with quizzical scepticism. a)  A decade ago, Microsoft's big problem was not FOSS per se, or even with copyleft.  The thing which really kept them awake at night was the fear that one day, someone might find, deep in the heart of the Windows code base, some code that should not be there and which was published under GPL.  The likelihood of this ever happening has long since faded away, but there was a time when MS was running scared.  I suspect this is why they held out for a while from making Windows source code open to inspection.  Nowadays, as an MVP, I am positively encouraged to ask to see Windows source. b)  Microsoft has never opposed the open source community.  They have had problems with specific people and organisations in the FOSS community.  Back in the 1990s, Richard Stallman gave time and energy to a successful campaign to launch antitrust proceedings against Microsoft.  In more recent times, the negative attitude of certain people to Microsoft's submission of two FOSS licences to the OSI (both of which have long since been accepted), and the mad scramble to try to find any argument, however tenuous, to block their submission was not, let us say, edifying. c) Microsoft has never, to my knowledge, written off the FOSS model.  They certainly don't agree that more traditional forms of licensing are inappropriate or immoral, and they've always been prepared to say so.  One reason why it was so hard to convince people that Microsoft is not rabidly antagonistic towards FOSS licensing is that so many people think they have no involvement in open source.  A decade ago, there was virtually no evidence of any such involvement.  However, that was a long time ago.  Quietly over the years, Microsoft has got on with the job of working out how to make use of FOSS licensing and how to support the FOSS community.  For example, as well as making increasingly extensive use of Github, they run an important FOSS forge (CodePlex) on which they, themselves, host many hundreds of distinct projects.  The total count may even be in the thousands now.  I suspect there is a limit of about 500 records on CodePlex searches because, for the past few years, whenever I search for Microsoft-specific projects on CodePlex, I always get approx. 500 hits.  Admittedly, a large volume of the stuff they publish under FOSS licences amounts to code samples, but many of those 'samples' have grown into useful and fully featured frameworks, libraries and tools. All this is leading up to the observation that yesterday's announcement by Scott Guthrie marks a significant milestone and should not go unnoticed.  If you missed it, let me summarise.   From the first release of .NET, Microsoft has offered a web development framework called ASP.NET.  The core libraries are included in the .NET framework which is released free of charge, but which is not open source.   However, in recent years, the number of libraries that constitute ASP.NET have grown considerably.  Today, most professional ASP.NET web development exploits the ASP.NET MVC framework.  This, together with several other important parts of the ASP.NET technology stack, is released on CodePlex under the Apache 2.0 licence.   Hence, today, a huge swathe of web development on the .NET/Azure platform relies four-square on the use of FOSS frameworks and libraries. Yesterday, Scott Guthrie announced the next stage of ASP.NET's journey towards FOSS nirvana.  This involves extending ASP.NET's FOSS stack to include Web API and the MVC Razor view engine which is rapidly becoming the de facto 'standard' for building web pages in ASP.NET.  However, perhaps the more important announcement is that the ASP.NET team will now accept and review contributions from the community.  Scott points out that this model is already in place elsewhere in Microsoft, and specifically draws attention to development of the Windows Azure SDKs.  These SDKs are central to Azure development.   The .NET and Java SDKs are published under Apache 2.0 on Github and Microsoft is open to community contributions.  Accepting contributions is a more profound move than simply releasing code under FOSS licensing.  It means that Microsoft is wholeheartedly moving towards a full-blooded open source approach for future evolution of some of their central and most widely used .NET and Azure frameworks and libraries.  In conjunction with Scott's announcement, Microsoft has also released Git support for CodePlex (at long last!) and, perhaps more importantly, announced significant new investment in their own FOSS forge. Here at Solidsoft we have several reasons to be very interested in Scott's announcement. I'll draw attention to one of them.  Earlier this year we wrote the initial version of a new UK Government web application called CloudStore.  CloudStore provides a way for local and central government to discover and purchase applications and services. We wrote the web site using ASP.NET MVC which is FOSS.  However, this point has been lost on the ladies and gentlemen of the press and, I suspect, on some of the decision makers on the government side.  They announced a few weeks ago that future versions of CloudStore will move to a FOSS framework, clearly oblivious of the fact that it is already built on a FOSS framework.  We are, it is fair to say, mildly irked by the uninformed and badly out-of-date assumption that “if it is Microsoft, it can't be FOSS”.  Old prejudices live on.

    Read the article

  • Recap: Oracle Fusion Middleware Strategies Driving Business Innovation

    - by Harish Gaur
    Hasan Rizvi, Executive Vice President of Oracle Fusion Middleware & Java took the stage on Tuesday to discuss how Oracle Fusion Middleware helps enable business innovation. Through a series of product demos and customer showcases, Hassan demonstrated how Oracle Fusion Middleware is a complete platform to harness the latest technological innovations (cloud, mobile, social and Fast Data) throughout the application lifecycle. Fig 1: Oracle Fusion Middleware is the foundation of business innovation This Session included 4 demonstrations to illustrate these strategies: 1. Build and deploy native mobile applications using Oracle ADF Mobile 2. Empower business user to model processes, design user interface and have rich mobile experience for process interaction using Oracle BPM Suite PS6. 3. Create collaborative user experience and integrate social sign-on using Oracle WebCenter Portal, Oracle WebCenter Content, Oracle Social Network & Oracle Identity Management 11g R2 4. Deploy and manage business applications on Oracle Exalogic Nike, LA Department of Water & Power and Nintendo joined Hasan on stage to share how their organizations are leveraging Oracle Fusion Middleware to enable business innovation. Managing Performance in the Wrld of Social and Mobile How do you provide predictable scalability and performance for an application that monitors active lifestyle of 8 million users on a daily basis? Nike’s answer is Oracle Coherence, a component of Oracle Fusion Middleware and Oracle Exadata. Fig 2: Oracle Coherence enabled data grid improves performance of Nike+ Digital Sports Platform Nicole Otto, Sr. Director of Consumer Digital Technology discussed the vision of the Nike+ platform, a platform which represents a shift for NIKE from a  "product"  to  a "product +" experience.  There are currently nearly 8 million users in the Nike+ system who are using digitally-enabled Nike+ devices.  Once data from the Nike+ device is transmitted to Nike+ application, users access the Nike+ website or via the Nike mobile applicatoin, seeing metrics around their daily active lifestyle and even engage in socially compelling experiences to compare, compete or collaborate their data with their friends. Nike expects the number of users to grow significantly this year which will drive an explosion of data and potential new experiences. To deal with this challenge, Nike envisioned building a shared platform that would drive a consumer-centric model for the company. Nike built this new platform using Oracle Coherence and Oracle Exadata. Using Coherence, Nike built a data grid tier as a distributed cache, thereby provide low-latency access to most recent and relevant data to consumers. Nicole discussed how Nike+ Digital Sports Platform is unique in the way that it utilizes the Coherence Grid.  Nike takes advantage of Coherence as a traditional cache using both cache-aside and cache-through patterns.  This new tier has enabled Nike to create a horizontally scalable distributed event-driven processing architecture. Current data grid volume is approximately 150,000 request per minute with about 40 million objects at any given time on the grid. Improving Customer Experience Across Multiple Channels Customer experience is on top of every CIO's mind. Customer Experience needs to be consistent and secure across multiple devices consumers may use.  This is the challenge Matt Lampe, CIO of Los Angeles Department of Water & Power (LADWP) was faced with. Despite being the largest utilities company in the country, LADWP had been relying on a 38 year old customer information system for serving its customers. Their prior system  had been unable to keep up with growing customer demands. Last year, LADWP embarked on a journey to improve customer experience for 1.6million LA DWP customers using Oracle WebCenter platform. Figure 3: Multi channel & Multi lingual LADWP.com built using Oracle WebCenter & Oracle Identity Management platform Matt shed light on his efforts to drive customer self-service across 3 dimensions – new website, new IVR platform and new bill payment service. LADWP has built a new portal to increase customer self-service while reducing the transactions via IVR. LADWP's website is powered Oracle WebCenter Portal and is accessible by desktop and mobile devices. By leveraging Oracle WebCenter, LADWP eliminated the need to build, format, and maintain individual mobile applications or websites for different devices. Their entire content is managed using Oracle WebCenter Content and secured using Oracle Identity Management. This new portal automated their paper based processes to web based workflows for customers. This includes automation of Self Service implemented through My Account -  like Bill Pay, Payment History, Bill History and Usage Analysis. LADWP's solution went live in April 2012. Matt indicated that LADWP's Self-Service Portal has greatly improved customer satisfaction.  In a JD Power Associates website satisfaction survey, results indicate rankings have climbed by 25+ points, marking a remarkable increase in user experience. Bolstering Performance and Simplifying Manageability of Business Applications Ingvar Petursson, Senior Vice Preisdent of IT at Nintendo America joined Hasan on-stage to discuss their choice of Exalogic. Nintendo had significant new requirements coming their way for business systems, both internal and external, in the years to come, especially with new products like the WiiU on the horizon this holiday season. Nintendo needed a platform that could give them performance, availability and ease of management as they deploy business systems. Ingvar selected Engineered Systems for two reasons: 1. High performance  2. Ease of management Figure 4: Nintendo relies on Oracle Exalogic to run ATG eCommerce, Oracle e-Business Suite and several business applications Nintendo made a decision to run their business applications (ATG eCommerce, E-Business Suite) and several Fusion Middleware components on the Exalogic platform. What impressed Ingvar was the "stress” testing results during evaluation. Oracle Exalogic could handle their 3-year load estimates for many functions, which was better than Nintendo expected without any hardware expansion. Faster Processing of Big Data Middleware plays an increasingly important role in Big Data. Last year, we announced at OpenWorld the introduction of Oracle Data Integrator for Hadoop and Oracle Loader for Hadoop which helps in the ability to move, transform, load data to and from Big Data Appliance to Exadata.  This year, we’ve added new capabilities to find, filter, and focus data using Oracle Event Processing. This product can natively integrate with Big Data Appliance or runs standalone. Hasan briefly discussed how NTT Docomo, largest mobile operator in Japan, leverages Oracle Event Processing & Oracle Coherence to process mobile data (from 13 million smartphone users) at a speed of 700K events per second before feeding it Hadoop for distributed processing of big data. Figure 5: Mobile traffic data processing at NTT Docomo with Oracle Event Processing & Oracle Coherence    

    Read the article

  • Emit Knowledge - social network for knowledge sharing

    - by hajan
    Emit Knowledge, as the words refer - it's a social network for emitting / sharing knowledge from users by users. Those who can benefit the most out of this network is perhaps all of YOU who have something to share with others and contribute to the knowledge world. I've been closely communicating with the core team of this very, very interesting, brand new social network (with specific purpose!) about the concept, idea and the vision they have for their product and I can say with a lot of confidence that this network has real potential to become something from which we will all benefit. I won't speak much about that and would prefer to give you link and try it yourself - http://www.emitknowledge.com Mainly, through the past few months I've been testing this network and it is getting improved all the time. The user experience is great, you can easily find out what you need and it follows some known patterns that are common for all social networks. They have some real good ideas and plans that are already under development for the next updates of their product. You can do micro blogging or you can do regular normal blogging… it’s up to you, and the way it works, it is seamless. Here is a short Question and Answers (QA) interview I made with the lead of the team, Marijan Nikolovski: 1. Can you please explain us briefly, what is Emit Knowledge? Emit Knowledge is a brand new knowledge based social network, delivering quality content from users to users. We believe that people’s knowledge, experience and professional thoughts compose quality content, worth sharing among millions around the world. Therefore, we created the platform that matches people’s need to share and gain knowledge in the most suitable and comfortable way. Easy to work with, Emit Knowledge lets you to smoothly craft and emit knowledge around the globe. 2. How 'old' is Emit Knowledge? In hamster’s years we are almost five years old start-up :). Just kidding. We’ve released our public beta about three months ago. Our official release date is 27 of June 2012. 3. How did you come up with this idea? Everything started from a simple idea to solve a complex problem. We’ve seen that the social web has become polluted with data and is on the right track to lose its base principles – socialization and common cause. That was our start point. We’ve gathered the team, drew some sketches and started to mind map the idea. After several idea refactoring’s Emit Knowledge was born. 4. Is there any competition out there in the market? Currently we don't have any competitors that share the same cause. What makes our platform different is the ideology that our product promotes and the functionalities that our platform offers for easy socialization based on interests and knowledge sharing. 5. What are the main technologies used to build Emit Knowledge? Emit Knowledge was built on a heterogeneous pallet of technologies. Currently, we have four of separation: UI – Built on ASP.NET MVC3 and Knockout.js; Messaging infrastructure – Build on top of RabbitMQ; Background services – Our in-house solution for job distribution, orchestration and processing; Data storage – Build on top of MongoDB; What are the main reasons you've chosen ASP.NET MVC? Since all of our team members are .NET engineers, the decision was very natural. ASP.NET MVC is the only Microsoft web stack that sticks to the HTTP behavioral standards. It is easy to work with, have a tiny learning curve and everyone who is familiar with the HTTP will understand its architecture and convention without any difficulties. 6. What are the main reasons for choosing ASP.NET MVC? Since all of our team members are .NET engineers, the decision was very natural. ASP.NET MVC is the only Microsoft web stack that sticks to the HTTP behavioral standards. It is easy to work with, have a tiny learning curve and everyone who is familiar with the HTTP will understand its architecture and convention without any difficulties. 7. Did you use some of the latest Microsoft technologies? If yes, which ones? Yes, we like to rock the cutting edge tech house. Currently we are using Microsoft’s latest technologies like ASP.NET MVC, Web API (work in progress) and the best for the last; we are utilizing Windows Azure IaaS to the bone. 8. Can you please tell us shortly, what would be the benefit of regular bloggers in other blogging platforms to join Emit Knowledge? Well, unless you are some of the smoking ace gurus whose blogs are followed by a large number of users, our platform offers knowledge based segregated community equipped with tools that will enable both current and future users to expand their relations and to self-promote in the community based on their activity and knowledge sharing. 10. I see you are working very intensively and there is already integration with some third-party services to make the process of sharing and emitting knowledge easier, which services did you integrate until now and what do you plan do to next? We have “reemit” functionality for internal sharing and we also support external services like: Twitter; LinkedIn; Facebook; For the regular bloggers we have an extra cream, Windows Live Writer support for easy blog posts emitting. 11. What should we expect next? Currently, we are working on a new fancy community feature. This means that we are going to support user groups to be formed. So for all existing communities and user groups out there, wait us a little bit, we are coming for rescue :). One of the top next features they are developing is the Community Feature. It means, if you have your own User Group, Community Group or any other Group on which you and your users are mostly blogging or sharing (emitting) knowledge in various ways, Emit Knowledge as a platform will help you have everything you need to promote your group, make new followers and host all the necessary stuff that you have had need of. I would invite you to try the network and start sharing knowledge in a way that will help you gather new followers and spread your knowledge faster, easier and in a more efficient way! Let’s Emit Knowledge!

    Read the article

  • New ways for backup, recovery and restore of Essbase Block Storage databases – part 2 by Bernhard Kinkel

    - by Alexandra Georgescu
    After discussing in the first part of this article new options in Essbase for the general backup and restore, this second part will deal with the also rather new feature of Transaction Logging and Replay, which was released in version 11.1, enhancing existing restore options. Tip: Transaction logging and replay cannot be used for aggregate storage databases. Please refer to the Oracle Hyperion Enterprise Performance Management System Backup and Recovery Guide (rel. 11.1.2.1). Even if backups are done on a regular, frequent base, subsequent data entries, loads or calculations would not be reflected in a restored database. Activating Transaction Logging could fill that gap and provides you with an option to capture these post-backup transactions for later replay. The following table shows, which are the transactions that could be logged when Transaction Logging is enabled: In order to activate its usage, corresponding statements could be added to the Essbase.cfg file, using the TRANSACTIONLOGLOCATION command. The complete syntax reads: TRANSACTIONLOGLOCATION [ appname [ dbname]] LOGLOCATION NATIVE ?ENABLE | DISABLE Where appname and dbname are optional parameters giving you the chance in combination with the ENABLE or DISABLE command to set Transaction Logging for certain applications or databases or to exclude them from being logged. If only an appname is specified, the setting applies to all databases in that particular application. If appname and dbname are not defined, all applications and databases would be covered. LOGLOCATION specifies the directory to which the log is written, e.g. D:\temp\trlogs. This directory must already exist or needs to be created before using it for log information being written to it. NATIVE is a reserved keyword that shouldn’t be changed. The following example shows how to first enable logging on a more general level for all databases in the application Sample, followed by a disabling statement on a more granular level for only the Basic database in application Sample, hence excluding it from being logged. TRANSACTIONLOGLOCATION Sample Hyperion/trlog/Sample NATIVE ENABLE TRANSACTIONLOGLOCATION Sample Basic Hyperion/trlog/Sample NATIVE DISABLE Tip: After applying changes to the configuration file you must restart the Essbase server in order to initialize the settings. A maybe required replay of logged transactions after restoring a database can be done only by administrators. The following options are available: In Administration Services selecting Replay Transactions on the right-click menu on the database: Here you can select to replay transactions logged after the last replay request was originally executed or after the time of the last restored backup (whichever occurred later) or transactions logged after a specified time. Or you can replay transactions selectively based on a range of sequence IDs, which can be accessed using Display Transactions on the right-click menu on the database: These sequence ID s (0, 1, 2 … 7 in the screenshot below) are assigned to each logged transaction, indicating the order in which the transaction was performed. This helps to ensure the integrity of the restored data after a replay, as the replay of transactions is enforced in the same order in which they were originally performed. So for example a calculation originally run after a data load cannot be replayed before having replayed the data load first. After a transaction is replayed, you can replay only transactions with a greater sequence ID. For example, replaying the transaction with sequence ID of 4 includes all preceding transactions, while afterwards you can only replay transactions with a sequence ID of 5 or greater. Tip: After restoring a database from a backup you should always completely replay all logged transactions, which were executed after the backup, before executing new transactions. But not only the transaction information itself needs to be logged and stored in a specified directory as described above. During transaction logging, Essbase also creates archive copies of data load and rules files in the following default directory: ARBORPATH/app/appname/dbname/Replay These files are then used during the replay of a logged transaction. By default Essbase archives only data load and rules files for client data loads, but in order to specify the type of data to archive when logging transactions you can use the command TRANSACTIONLOGDATALOADARCHIVE as an additional entry in the Essbase.cfg file. The syntax for the statement is: TRANSACTIONLOGDATALOADARCHIVE [appname [dbname]] [OPTION] While to the [appname [dbname]] argument the same applies like before for TRANSACTIONLOGLOCATION, the valid values for the OPTION argument are the following: Make the respective setting for which files copies should be logged, considering from which location transactions are usually taking place. Selecting the NONE option prevents Essbase from saving the respective files and the data load cannot be replayed. In this case you must first manually load the data before you can replay the transactions. Tip: If you use server or SQL data and the data and rules files are not archived in the Replay directory (for example, you did not use the SERVER or SERVER_CLIENT option), Essbase replays the data that is actually in the data source at the moment of the replay, which may or may not be the data that was originally loaded. You can find more detailed information in the following documents: Oracle Hyperion Enterprise Performance Management System Backup and Recovery Guide (rel. 11.1.2.1) Oracle Essbase Online Documentation (rel. 11.1.2.1)) Enterprise Performance Management System Documentation (including previous releases) Or on the Oracle Technology Network. If you are also interested in other new features and smart enhancements in Essbase or Hyperion Planning stay tuned for coming articles or check our training courses and web presentations. You can find general information about offerings for the Essbase and Planning curriculum or other Oracle-Hyperion products here; (please make sure to select your country/region at the top of this page) or in the OU Learning paths section, where Planning, Essbase and other Hyperion products can be found under the Fusion Middleware heading (again, please select the right country/region). Or drop me a note directly: [email protected]. About the Author: Bernhard Kinkel started working for Hyperion Solutions as a Presales Consultant and Consultant in 1998 and moved to Hyperion Education Services in 1999. He joined Oracle University in 2007 where he is a Principal Education Consultant. Based on these many years of working with Hyperion products he has detailed product knowledge across several versions. He delivers both classroom and live virtual courses. His areas of expertise are Oracle/Hyperion Essbase, Oracle Hyperion Planning and Hyperion Web Analysis. Disclaimer: All methods and features mentioned in this article must be considered and tested carefully related to your environment, processes and requirements. As guidance please always refer to the available software documentation. This article does not recommend or advise any explicit action or change, hence the author cannot be held responsible for any consequences due to the use or implementation of these features.

    Read the article

  • Can Microsoft Build Appliances?

    - by andrewbrust
    Billy Hollis, my Visual Studio Live! colleague and fellow Microsoft Regional Director said recently, and I am paraphrasing, that the computing world, especially on the consumer side, has shifted from one of building hardware and software that makes things possible to do, to building products and technologies that make things easy to do.  Billy crystalized things perfectly, as he often does. In this new world of “easy to do,” Apple has done very well and Microsoft has struggled.  In the old world, customers wanted a Swiss Army Knife, with the most gimmicks and gadgets possible.  In the new world, people want elegantly cutlery.  They may want cake cutters and utility knives too, but they don’t want one device that works for all three tasks.  People don’t want tools, they want utensils.  People don’t want machines.  They want appliances. Microsoft Appliances: They Do Exist Microsoft has built a few appliance-like devices.  I would say XBox 360 is an appliance,  It’s versatile, mind you, but it’s the kind of thing you plug in, turn on and use, as opposed to set-up, tune, and open up to upgrade the internals.  Windows Phone 7 is an appliance too.  It’s a true smartphone, unlike Windows Mobile which was a handheld computer with a radio stack.  Zune is an appliance too, and a nice one.  It hasn’t attained much traction in the market, but that’s probably because the seminal consumer computing appliance -- the iPod – got there so much more quickly. In the embedded world, Mediaroom, Microsoft’s set-top product for the cable industry (used by AT&T U-Verse and others) is an appliance.  So is Microsoft’s Sync technology, used in Ford automobiles.  Even on the enterprise side, Microsoft has an appliance: SQL Server Parallel Data Warehouse Edition (PDW) combines Microsoft software with select OEMs’ server, networking and storage hardware.  You buy the appliance units from the OEMs, plug them in, connect them and go. I would even say that Bing is an appliance.  Not in the hardware sense, mind you.  But from the software perspective, it’s a single-purpose product that you visit or run, use and then move on.  You don’t have to install it (except the iOS and Android native apps where it’s pretty straightforward), you don’t have to customize it, you don’t have to program it.  Basically, you just use it. Microsoft Appliances that Should Exist But Microsoft builds a bunch of things that are not appliances.  Media Center is not an appliance, and it most certainly should be.  Instead, it’s an app that runs on Windows 7.  It runs full-screen and you can use this configuration to conceal the fact that Windows is under it, but eventually something will cause you to abandon that masquerade (like Patch Tuesday). The next version of Windows Home Server won’t, in my opinion, be an appliance either.  Now that the Drive Extender technology is gone, and users can’t just add and remove drives into and from a single storage pool, the product is much more like a IT server and less like an appliance-premised one.  Much has been written about this decision by Microsoft.  I’ll just sum it up in one word: pity. Microsoft doesn’t have anything remotely appliance-like in the tablet category, either.  Until it does, it likely won’t have much market share in that space either.  And of course, the bulk of Microsoft’s product catalog on the business side is geared to enterprise machines and not personal appliances. Appliance DNA: They Gotta Have It. The consumerization of IT is real, because businesspeople are consumers too.  They appreciate the fit and finish of appliances at home, and they increasingly feel entitled to have it at work too.  Secure and reliable push email in a smartphone is necessary, but it isn’t enough.  People want great apps and a pleasurable user experience too.  The full Microsoft Office product is needed at work, but a PC with a keyboard and mouse, or maybe a touch screen that uses a stylus (or requires really small fingers), to run Office isn’t enough either.  People want a flawless touch experience available for the times they want to read and take quick notes.  Until Microsoft realizes this fully and internalizes it, it will suffer defeats in the consumer market and even setbacks in the business market.  Think about how slow the Office upgrade cycle is…now imagine if the next version of Office had a first-class alternate touch UI and consider the possible acceleration in adoption rates. Can Microsoft make the appliance switch?  Can the appliance mentality become pervasive at the company?  Can Microsoft hasten its release cycles dramatically and shed the “some assembly required” paradigm upon which many of its products are based?  Let’s face it, the chances that Microsoft won’t make this transition are significant. But there are also encouraging signs, and they should not be ignored.  The appliances we have already discussed, especially Xbox, Zune and Windows Phone 7, are the most obvious in this regard.  The fact that SQL Server has an appliance SKU now is a more subtle but perhaps also more significant outcome, because that product sits so smack in the middle of Microsoft’s enterprise stack.  Bing is encouraging too, especially given its integrated travel, maps and augmented reality capabilities.  As Bing gains market share, Microsoft has tangible proof that it can transform and win, even when everyone outside the company, and many within it, would bet otherwise. That Great Big Appliance in the Sky Perhaps the most promising (and evolving) proof points toward the appliance mentality, though, are Microsoft’s cloud offerings -- Azure and BPOS/Office 365.  While the cloud does not represent a physical appliance (quite the opposite in fact) its ability to make acquisition, deployment and use of technology simple for the user is absolutely an embodiment of the appliance mentality and spirit.  Azure is primarily a platform as a service offering; it doesn’t just provide infrastructure.  SQL Azure does likewise for databases.  And Office 365 does likewise for SharePoint, Exchange and Lync. You don’t administer, tune and manage servers; instead, you create databases or site collections or mailboxes and start using them. Upgrades come automatically, and it seems like releases will come more frequently.  Fault tolerance and content distribution is just there.  No muss.  No fuss.  You use these services; you don’t have to set them up and think about them.  That’s how appliances work.  To me, these signs point out that Microsoft has the full capability of transforming itself.  But there’s a lot of work ahead.  Microsoft may say they’re “all in” on the cloud, but the majority of the company is still oriented around its old products and models.  There needs to be a wholesale cultural transformation in Redmond.  It can happen, but product management, program management, the field and executive ranks must unify in the effort. So must partners, and even customers.  New leaders must rise up and Microsoft must be able to see itself as a winner.  If Microsoft does this, it could lock-in decades of new success, and be a standard business school case study for doing so.  If not, the company will have missed an opportunity, and may see its undoing.

    Read the article

  • Modern/Metro Internet Explorer: What were they thinking???

    - by Rick Strahl
    As I installed Windows 8.1 last week I decided that I really should take a closer look at Internet Explorer in the Modern/Metro environment again. Right away I ran into two issues that are real head scratchers to me.Modern Split Windows don't resize Viewport but Zoom OutThis one falls in the "WTF, really?" department: It looks like Modern Internet Explorer's Modern doesn't resize the browser window as every other browser (including IE 11 on the desktop) does, but rather tries to adjust the zoom to the width of the browser. This means that if you use the Modern IE browser and you split the display between IE and another application, IE will be zoomed out, with text becoming much, much smaller, rather than resizing the browser viewport and adjusting the pixel width as you would when a browser window is typically resized.Here's what I'm talking about in a couple of pictures. First here's the full screen Internet Explorer version (this shot is resized down since it's full screen at 1080p, click to see the full image):This brings up the first issue which is: On the desktop who wants to browse a site full screen? Most sites aren't fully optimized for 1080p widescreen experience and frankly most content that wide just looks weird. Even in typical 10" resolutions of 1280 width it's weird to look at things this way. At least this issue can be worked around with @media queries and either constraining the view, or adding additional content to make use of the extra space. Still running a desktop browser full screen is not optimal on a desktop machine - ever.Regardless, this view, while oversized, is what I expect: Everything is rendered in the right ratios, with font-size and the responsive design styling properly respected.But now look what happens when you split the desktop windows and show half desktop and have modern IE (this screen shot is not resized but cropped - this is actual size content as you can see in the cropped Twitter window on the right half of the screen):What's happening here is that IE is zooming out of the content to make it fit into the smaller width, shrinking the content rather than resizing the viewport's pixel width. In effect it looks like the pixel width stays at 1080px and the viewport expands out height-wise in response resulting in some crazy long portrait view.There goes responsive design - out the window literally. If you've built your site using @media queries and fixed viewport sizes, Internet Explorer completely screws you in this split view. On my 1080p monitor, the site shown at a little under half width becomes completely unreadable as the fonts are too small and break up. As you go into split view and you resize the window handle the content of the browser gets smaller and smaller (and effectively longer and longer on the bottom) effectively throwing off any responsive layout to the point of un-readability even on a big display, let alone a small tablet screen.What could POSSIBLY be the benefit of this screwed up behavior? I checked around a bit trying different pages in this shrunk down view. Other than the Microsoft home page, every page I went to was nearly unreadable at a quarter width. The only page I found that worked 'normally' was the Microsoft home page which undoubtedly is optimized just for Internet Explorer specifically.Bottom Address Bar opaquely overlays ContentAnother problematic feature for me is the browser address bar on the bottom. Modern IE shows the status bar opaquely on the bottom, overlaying the content area of the Web Page - until you click on the page. Until you do though, the address bar overlays the bottom content solidly. And not just a little bit but by good sizable chunk.In the application from the screen shot above I have an application toolbar on the bottom and the IE Address bar completely hides that bottom toolbar when the page is first loaded, until the user clicks into the content at which point the address bar shrinks down to a fat border style bar with a … on it. Toolbars on the bottom are pretty common these days, especially for mobile optimized applications, so I'd say this is a common use case. But even if you don't have toolbars on the bottom maybe there's other fixed content on the bottom of the page that is vital to display. While other browsers often also show address bars and then later hide them, these other browsers tend to resize the viewport when the address bar status changes, so the content can respond to the size change. Not so with Modern IE. The address bar overlays content and stays visible until content is clicked. No resize notification or viewport height change is sent to the browser.So basically Internet Explorer is telling me: "Our toolbar is more important than your content!" - AND gives me no chance to re-act to that behavior. The result on this page/application is that the user sees no actionable operations until he or she clicks into the content area, which is terrible from a UI perspective as the user has no idea what options are available on initial load.It's doubly confounding in that IE is running in full screen mode and has an the entire height of the screen at its disposal - there's plenty of real estate available to not require this sort of hiding of content in the first place. Heck, even Windows Phone with its more constrained size doesn't hide content - in fact the address bar on Windows Phone 8 is always visible.What were they thinking?Every time I use anything in the Modern Metro interface in Windows 8/8.1 I get angry.  I can pretty much ignore Metro/Modern for my everyday usage, but unfortunately with Internet Explorer in the modern shell I have to live with, because there will be users using it to access my sites. I think it's inexcusable by Microsoft to build such a crappy shell around the browser that impacts the actual usability of Web content. In both of the cases above I can only scratch my head at what could have possibly motivated anybody designing the UI for the browser to make these screwed up choices, that manipulate the content in a totally unmaintainable way.© Rick Strahl, West Wind Technologies, 2005-2013Posted in Windows  HTML5   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

< Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >