Search Results

Search found 16628 results on 666 pages for 'setup kit'.

Page 306/666 | < Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >

• Microsoft TechEd 2010 - Day 2 @ Bangalore

  - by sathya

  Microsoft TechEd 2010 - Day 2 @ Bangalore Today is the day 2 @ Microsoft TechEd 2010. We had lot of technical sessions as usual there were many tracks going on side by side and I was attending the Web simplified track, Which comprised of the following sessions :   Developing a scalable Media Application using ASP.NET MVC - This was a kind of little advanced stuff. Anyways I couldn't understand much because this was not my piece of cake and I havent worked on this before ASP.Net MVC Unplugged - This was really great because this session covered from the basics of MVC showing what is Model,View and Controller and how it worked and the speaker went into the details of the same. Building RESTful Applications with the Open Data Protocol - There were some concepts explained about this from the basics on how to build RESTful Services and it went on till some advanced configurations of the same. Developing Scalable Web Applications with AppFabric Caching - This session showed about the integration of AppFabric with the .Net Web Applications. Instead of using Inproc Sessions, we can use this AppFabric as a substitute for Caching and outofProc Session Storage without writing code and doing a little bit of configurations which brings in High Scalability, performance to our applications. (But unfortunately there were no demos for this session ) Deep Dive : WCF RIA Services - This session was also an interactive one, in this the speaker presented from the basics of WCF and took a Book Store Application as a sample and explained all details concepts on linking with RIA Services   Apart from these sessions, in between there happened some small events in the breaks like Some discussions about Technology, Innovations Music Jokes Mimicry, etc. And on doing all these things, the developers were given some kool gifts / goodies like USBs, T-Shirts, etc. And today I got a chance to do the following certification : (70-562) Microsoft Certified Technology Specialist in .NET 3.5 Web Applications Since I already have an MCTS in .NET 2.0, I wanted to do an MCPD and for doing the same I was required to do an update to my MCTS with the .NET 3.5 framework and I did the same I cleared it and now am an MCTS in .NET 3.5 Web Apps And on doing this I got a T-Shirt and they gave something called Learning $ of worth 30$. And in various stalls for attending each quiz or some game or some referrals we got some Learning $ which we can redeem later based on our Total Learning $. I got 105 $ which i was able to redeem and got a Microsoft Learning BagPack, 1 free Microsoft certification offer, a laptop light and an e-learning content activated. And after all these sessions and small events, we had something called Demo Extravaganza like I mentioned yesterday. This was a great funfilled event with lot of goodies for the attendees. There were some lucky draw which enabled 2 attendees to get Netbooks (Sponsored by Intel) and 1 attendee to get X-box (Sponsored by Citrix). After Choosing the raffle in the lucky draw they kept it on a device called Microsoft Surface which is a kind of big touch screen device and on putting the raffle on that it detected the code of the attendee and said intelligently how many sessions that person has attended and if he has attended more than 5 he got a Netbook and this was coded by a guy called Imran. Apart from they showed demos on : Research by 2 Tamilnadu students from Krishna Arts and Science college, taken 1200 photographs of their college from different angles and put that up in Bing maps using silverlight and linked with Photosynth, which showed a 3d view of their college based on the photos they uploaded Reasearch by Microsoft on Panaramic HD views of the images. One young guy from Microsoft Research showed a demo of this on Srivilliputhur Andal Temple, in Tamil Nadu and its history with a panoramic view of the temple and the near by places with narration of the historical information on the same and with the videos embedded in it with high definition images which we can zoom to a very detailed level. Some Demo on a business app with Silverlight, Business Intelligence (BI) and maps integrated. It showed the sales of a particular product across locations. Some kool demos by 2 geeks who used Robots to show their development talents. 2 Robots fought with each other 2 Robots danced in sync for the A.R. Rehman song Humma Humma... A dream home project by Raman. He is currently using the same in his home too. Robots are controlling his home currently. They showed a video on this. Here are the list of activities that Robot does for him When he reads a book, robot automatically scans that and shows that image of that person in the screen (TV or comp) in front of him. It shows a wikipedia about that person. It says that person is not in linked in. do you want to add him If he sees an IPL Match news in the book and smiles it understands he is interested in that and opens a website related to that and shows the current game and the scorecard. It cooks for him It cleans the room for him whenever he leaves the house when he is doing something if some intruder comes inside his house his computer automatically switches his screen showing the video of the person coming inside. When he wakes up it automatically opens up the system, loads his mails and the news by the side, etc. Some Demos on Microsoft Pivot. This was there in livelabs but it is now available in getpivot.com its a pivoting of the pictorial data based on some categories and filters on the searches that we do. And finally on filling up some feedback forms we got T-Shirts and Microsoft Visual Studio 2010 Training Kit CDs. Whats more on TechEd??? Stay tuned!!! Will update you soon on the other happenings!! PS : I typed a lot of content for more than a hour but I pressed a backspace and it went to the previous page and all my content were lost and I was not able to retrieve the same and I typed everything again.

  Read the article

• LIMBO fails on startup with Internal errors - invalid parameters received

  - by user61262

  I installed LIMBO from the Humble Bundle V and as far as I am aware, this has wine packaged with it (I also installed the latest from the repo's in case is was because of that). However the game doesn't even start and fails with the message: Wine Program Error Internal errors - invalid parameters received. Is there a way to log the error or does anyone know why this happens? This question was asked previously but it seems to have disappeared. My Graphics cards is a Geforece GT 250 Cheers ice. [edit: Wine outputs the following error: wine /opt/limbo/support/limbo/drive_c/Program\ Files/limbo/limbo.exe fixme:system:SystemParametersInfoW Unimplemented action: 59 (SPI_SETSTICKYKEYS) fixme:system:SystemParametersInfoW Unimplemented action: 53 (SPI_SETTOGGLEKEYS) fixme:system:SystemParametersInfoW Unimplemented action: 51 (SPI_SETFILTERKEYS) fixme:win:EnumDisplayDevicesW ((null),0,0x32f580,0x00000000), stub! err:x11settings:X11DRV_ChangeDisplaySettingsEx No matching mode found 1920x1080x32 @60! (XRandR) err:xrandr:X11DRV_XRandR_SetCurrentMode Resolution change not successful -- perhaps display has changed? wine: Unhandled page fault on read access to 0x00000000 at address 0x48213e (thread 0009), starting debugger... The debugger has the following output: Unhandled exception: page fault on read access to 0x00000000 in 32-bit code (0x0048213e). Register dump: CS:0073 SS:007b DS:007b ES:007b FS:0033 GS:003b EIP:0048213e ESP:0032f9f4 EBP:0037cdd0 EFLAGS:00010202( R- -- I - - - ) EAX:00000000 EBX:00000000 ECX:00000000 EDX:0037cf4c ESI:0037cda8 EDI:0037cdcc Stack dump: 0x0032f9f4: 0037cda8 0034c708 7bc35120 00000000 0x0032fa04: 0037cda8 0032fa38 0079fc58 00000000 0x0032fa14: 0048b7d4 00000001 0037cdcc 00000001 0x0032fa24: 00000780 00000438 0034c620 00000000 0x0032fa34: 0034c708 0032fa78 007a04e2 00000002 0x0032fa44: 0048c4bc 00000780 00000438 0037cda8 Backtrace: =>0 0x0048213e in limbo (+0x8213e) (0x0037cdd0) 0x0048213e: movl 0x0(%eax),%edx Modules: Module Address Debug info Name (103 modules) PE 400000- 926000 Export limbo PE 10000000-101ff000 Deferred d3dx9_43 ELF 79bb3000-7b800000 Deferred libnvidia-glcore.so.295.53 ELF 7b800000-7ba15000 Deferred kernel32<elf> \-PE 7b810000-7ba15000 \ kernel32 ELF 7bc00000-7bcc3000 Deferred ntdll<elf> \-PE 7bc10000-7bcc3000 \ ntdll ELF 7bf00000-7bf04000 Deferred <wine-loader> ELF 7d7e0000-7d7e4000 Deferred libnvidia-tls.so.295.53 ELF 7d7e4000-7d8bc000 Deferred libgl.so.1 ELF 7d9d0000-7d9d9000 Deferred librt.so.1 ELF 7d9d9000-7d9de000 Deferred libgpg-error.so.0 ELF 7d9de000-7d9f6000 Deferred libresolv.so.2 ELF 7d9f6000-7d9fa000 Deferred libkeyutils.so.1 ELF 7d9fa000-7da43000 Deferred libdbus-1.so.3 ELF 7da43000-7da55000 Deferred libp11-kit.so.0 ELF 7da55000-7dada000 Deferred libgcrypt.so.11 ELF 7dada000-7daec000 Deferred libtasn1.so.3 ELF 7daec000-7daf5000 Deferred libkrb5support.so.0 ELF 7daf5000-7dafa000 Deferred libcom_err.so.2 ELF 7dafa000-7db22000 Deferred libk5crypto.so.3 ELF 7db22000-7dbf1000 Deferred libkrb5.so.3 ELF 7dbf1000-7dc03000 Deferred libavahi-client.so.3 ELF 7dc03000-7dc11000 Deferred libavahi-common.so.3 ELF 7dc11000-7dcd5000 Deferred libgnutls.so.26 ELF 7dcd5000-7dd13000 Deferred libgssapi_krb5.so.2 ELF 7dd13000-7dd66000 Deferred libcups.so.2 ELF 7dd94000-7ddc8000 Deferred uxtheme<elf> \-PE 7dda0000-7ddc8000 \ uxtheme ELF 7ddc8000-7ddd3000 Deferred libxcursor.so.1 ELF 7ddd4000-7dde7000 Deferred gnome-keyring-pkcs11.so ELF 7de47000-7de4d000 Deferred libxfixes.so.3 ELF 7deac000-7ded6000 Deferred libexpat.so.1 ELF 7ded6000-7df0a000 Deferred libfontconfig.so.1 ELF 7df0a000-7df1a000 Deferred libxi.so.6 ELF 7df1a000-7df1e000 Deferred libxcomposite.so.1 ELF 7df1e000-7df27000 Deferred libxrandr.so.2 ELF 7df27000-7df31000 Deferred libxrender.so.1 ELF 7df31000-7df37000 Deferred libxxf86vm.so.1 ELF 7df37000-7df3b000 Deferred libxinerama.so.1 ELF 7df3b000-7df5d000 Deferred imm32<elf> \-PE 7df40000-7df5d000 \ imm32 ELF 7df5d000-7df64000 Deferred libxdmcp.so.6 ELF 7df64000-7df85000 Deferred libxcb.so.1 ELF 7df85000-7df9f000 Deferred libice.so.6 ELF 7df9f000-7e0d3000 Deferred libx11.so.6 ELF 7e0d3000-7e0e5000 Deferred libxext.so.6 ELF 7e0e5000-7e178000 Deferred winex11<elf> \-PE 7e0f0000-7e178000 \ winex11 ELF 7e178000-7e18e000 Deferred libz.so.1 ELF 7e18e000-7e228000 Deferred libfreetype.so.6 ELF 7e228000-7e247000 Deferred libtinfo.so.5 ELF 7e247000-7e269000 Deferred libncurses.so.5 ELF 7e27d000-7e292000 Deferred xinput1_3<elf> \-PE 7e280000-7e292000 \ xinput1_3 ELF 7e292000-7e2a6000 Deferred psapi<elf> \-PE 7e2a0000-7e2a6000 \ psapi ELF 7e2a6000-7e304000 Deferred dbghelp<elf> \-PE 7e2b0000-7e304000 \ dbghelp ELF 7e304000-7e391000 Deferred msvcrt<elf> \-PE 7e320000-7e391000 \ msvcrt ELF 7e391000-7e4c5000 Deferred wined3d<elf> \-PE 7e3a0000-7e4c5000 \ wined3d ELF 7e4c5000-7e4fe000 Deferred d3d9<elf> \-PE 7e4d0000-7e4fe000 \ d3d9 ELF 7e4fe000-7e573000 Deferred rpcrt4<elf> \-PE 7e510000-7e573000 \ rpcrt4 ELF 7e573000-7e67b000 Deferred ole32<elf> \-PE 7e590000-7e67b000 \ ole32 ELF 7e67b000-7e697000 Deferred dinput8<elf> \-PE 7e680000-7e697000 \ dinput8 ELF 7e697000-7e6d1000 Deferred winspool<elf> \-PE 7e6a0000-7e6d1000 \ winspool ELF 7e6d1000-7e7c9000 Deferred comctl32<elf> \-PE 7e6e0000-7e7c9000 \ comctl32 ELF 7e7c9000-7e833000 Deferred shlwapi<elf> \-PE 7e7e0000-7e833000 \ shlwapi ELF 7e833000-7ea44000 Deferred shell32<elf> \-PE 7e840000-7ea44000 \ shell32 ELF 7ea44000-7eb23000 Deferred comdlg32<elf> \-PE 7ea50000-7eb23000 \ comdlg32 ELF 7eb23000-7eb3c000 Deferred version<elf> \-PE 7eb30000-7eb3c000 \ version ELF 7eb3c000-7eb9c000 Deferred advapi32<elf> \-PE 7eb50000-7eb9c000 \ advapi32 ELF 7eb9c000-7ec59000 Deferred gdi32<elf> \-PE 7ebb0000-7ec59000 \ gdi32 ELF 7ec59000-7ed99000 Deferred user32<elf> \-PE 7ec70000-7ed99000 \ user32 ELF 7ef99000-7efa6000 Deferred libnss_files.so.2 ELF 7efa6000-7efc0000 Deferred libnsl.so.1 ELF 7efc0000-7efec000 Deferred libm.so.6 ELF 7efee000-7eff4000 Deferred libuuid.so.1 ELF 7eff4000-7f000000 Deferred libnss_nis.so.2 ELF b7411000-b7415000 Deferred libxau.so.6 ELF b7415000-b741e000 Deferred libnss_compat.so.2 ELF b741f000-b7424000 Deferred libdl.so.2 ELF b7424000-b75ca000 Deferred libc.so.6 ELF b75cb000-b75e6000 Deferred libpthread.so.0 ELF b75e9000-b75f2000 Deferred libsm.so.6 ELF b75fa000-b773c000 Dwarf libwine.so.1 ELF b773e000-b7760000 Deferred ld-linux.so.2 ELF b7760000-b7761000 Deferred [vdso].so Threads: process tid prio (all id:s are in hex) 00000008 (D) Z:\opt\limbo\support\limbo\drive_c\Program Files\limbo\limbo.exe 00000009 0 <== 0000000e services.exe 00000020 0 0000001f 0 00000019 0 00000018 0 00000017 0 00000015 0 00000010 0 0000000f 0 00000012 winedevice.exe 0000001d 0 0000001a 0 00000014 0 00000013 0 0000001b plugplay.exe 00000021 0 0000001e 0 0000001c 0 00000022 explorer.exe 00000023 0 System information: Wine build: wine-1.4 Platform: i386 Host system: Linux Host version: 3.2.0-24-generic-pae

  Read the article

• How can I read kindle book under xfce(ubuntu)? (using chromebook)(wine not working)

  - by yshn

  I'm using chromebook, dual booting xfce(ubuntu) and cr os. The ebook I bought on amazon is not supported on kindle cloud reader. (Under xfce)I downloaded wine and tried installing kindle for pc under wine, and after couples of times of trials, it always said installation error and could not install kindle, and it's been giving me: Unhandled exception: unimplemented function msvcp90.dll.??0?$basic_ofstream@DU?$char_traits@D@std@@@std@@QAE@XZ called in 32-bit code (0x7b839cf2). Register dump: CS:0023 SS:002b DS:002b ES:002b FS:0063 GS:006b EIP:7b839cf2 ESP:0033fcd4 EBP:0033fd38 EFLAGS:00000287( - -- I S - -P-C) EAX:7b826245 EBX:7b894ff4 ECX:00000008 EDX:0033fcf4 ESI:80000100 EDI:00dca568 Stack dump: 0x0033fcd4: 0033fd58 00000008 00000030 80000100 0x0033fce4: 00000001 00000000 7b839cf2 00000002 0x0033fcf4: 7e24b340 7e24f2ca 0000000d 00110000 0x0033fd04: 7bc47a0d 7e1dbff4 7e1417f0 00dca568 0x0033fd14: 0033fd24 7bc65d0b 00110000 00000000 0x0033fd24: 0033fd44 7e141801 7b839caa 7e1dbff4 000c: sel=0067 base=00000000 limit=00000000 16-bit r-x Backtrace: =0 0x7b839cf2 in kernel32 (+0x29cf2) (0x0033fd38) 1 0x7e24b2a8 in msvcp90 (+0x3b2a7) (0x0033fd68) 2 0x7e216c9d in msvcp90 (+0x6c9c) (0x0033fde8) 3 0x00938fdd in kindle (+0x538fdc) (0x0033fde8) 4 0x0089dc71 in kindle (+0x49dc70) (0x0033fe70) 5 0x7b859cdc call_process_entry+0xb() in kernel32 (0x0033fe88) 6 0x7b85af4f in kernel32 (+0x4af4e) (0x0033fec8) 7 0x7bc71db0 call_thread_func_wrapper+0xb() in ntdll (0x0033fed8) 8 0x7bc7486d call_thread_func+0x7c() in ntdll (0x0033ffa8) 9 0x7bc71d8e RtlRaiseException+0x21() in ntdll (0x0033ffc8) 10 0x7bc49f4e call_dll_entry_point+0x61d() in ntdll (0x0033ffe8) 0x7b839cf2: subl $4,%esp Modules: Module Address Debug info Name (130 modules) PE 340000- 37d000 Deferred ssleay32 PE 390000- 3ca000 Deferred webcoreviewer PE 3d0000- 3e0000 Deferred pthreadvc2 PE 400000- 1433000 Export kindle PE 1440000- 155c000 Deferred libeay32 PE 1560000- 169f000 Deferred qtscript4 PE 16a0000- 1795000 Deferred libxml2 PE 17a0000- 18c7000 Deferred javascriptcore PE 18d0000- 1974000 Deferred cflite PE 1980000- 2048000 Deferred libwebcore PE 2050000- 208d000 Deferred libjpeg PE 10000000-10a34000 Deferred qtwebkit4 PE 4a800000-4a8eb000 Deferred icuuc46 PE 4a900000-4aa36000 Deferred icuin46 PE 4ad00000-4bb80000 Deferred icudt46 PE 5a4c0000-5a4d4000 Deferred zlib1 PE 61000000-61056000 Deferred qtxml4 PE 62000000-62093000 Deferred qtsql4 PE 64000000-640ef000 Deferred qtnetwork4 PE 65000000-657b8000 Deferred qtgui4 PE 67000000-67228000 Deferred qtcore4 PE 78050000-780b9000 Deferred msvcp100 PE 78aa0000-78b5e000 Deferred msvcr100 ELF 7b800000-7ba15000 Dwarf kernel32 -PE 7b810000-7ba15000 \ kernel32 ELF 7bc00000-7bcc3000 Dwarf ntdll -PE 7bc10000-7bcc3000 \ ntdll ELF 7bf00000-7bf04000 Deferred ELF 7d7f7000-7d800000 Deferred librt.so.1 ELF 7d800000-7d818000 Deferred libresolv.so.2 ELF 7d818000-7d861000 Deferred libdbus-1.so.3 ELF 7d861000-7d873000 Deferred libp11-kit.so.0 ELF 7d873000-7d8f8000 Deferred libgcrypt.so.11 ELF 7d8f8000-7d90a000 Deferred libtasn1.so.3 ELF 7d90a000-7d913000 Deferred libkrb5support.so.0 ELF 7d913000-7d9e2000 Deferred libkrb5.so.3 ELF 7da42000-7da47000 Deferred libgpg-error.so.0 ELF 7da47000-7da6f000 Deferred libk5crypto.so.3 ELF 7da6f000-7da81000 Deferred libavahi-client.so.3 ELF 7da81000-7da8f000 Deferred libavahi-common.so.3 ELF 7da8f000-7db53000 Deferred libgnutls.so.26 ELF 7db53000-7db91000 Deferred libgssapi_krb5.so.2 ELF 7db91000-7dbe4000 Deferred libcups.so.2 ELF 7dc21000-7dc55000 Deferred uxtheme -PE 7dc30000-7dc55000 \ uxtheme ELF 7dc55000-7dc5b000 Deferred libxfixes.so.3 ELF 7dc5b000-7dc66000 Deferred libxcursor.so.1 ELF 7dc6a000-7dc6e000 Deferred libkeyutils.so.1 ELF 7dc6e000-7dc73000 Deferred libcom_err.so.2 ELF 7dca5000-7dccf000 Deferred libexpat.so.1 ELF 7dccf000-7dd03000 Deferred libfontconfig.so.1 ELF 7dd03000-7dd13000 Deferred libxi.so.6 ELF 7dd13000-7dd17000 Deferred libxcomposite.so.1 ELF 7dd17000-7dd20000 Deferred libxrandr.so.2 ELF 7dd20000-7dd2a000 Deferred libxrender.so.1 ELF 7dd2a000-7dd30000 Deferred libxxf86vm.so.1 ELF 7dd30000-7dd34000 Deferred libxinerama.so.1 ELF 7dd34000-7dd3b000 Deferred libxdmcp.so.6 ELF 7dd3b000-7dd5c000 Deferred libxcb.so.1 ELF 7dd5c000-7dd76000 Deferred libice.so.6 ELF 7dd76000-7deaa000 Deferred libx11.so.6 ELF 7deaa000-7debc000 Deferred libxext.so.6 ELF 7debc000-7dec5000 Deferred libsm.so.6 ELF 7ded4000-7df67000 Deferred winex11 -PE 7dee0000-7df67000 \ winex11 ELF 7df67000-7e001000 Deferred libfreetype.so.6 ELF 7e001000-7e023000 Deferred iphlpapi -PE 7e010000-7e023000 \ iphlpapi ELF 7e023000-7e03e000 Deferred wsock32 -PE 7e030000-7e03e000 \ wsock32 ELF 7e03e000-7e071000 Deferred wintrust -PE 7e040000-7e071000 \ wintrust ELF 7e071000-7e129000 Deferred crypt32 -PE 7e080000-7e129000 \ crypt32 ELF 7e129000-7e158000 Deferred msvcr90 -PE 7e130000-7e158000 \ msvcr90 ELF 7e158000-7e1e5000 Deferred msvcrt -PE 7e170000-7e1e5000 \ msvcrt ELF 7e1e5000-7e2ca000 Dwarf msvcp90 -PE 7e210000-7e2ca000 \ msvcp90 ELF 7e2ca000-7e2ec000 Deferred imm32 -PE 7e2d0000-7e2ec000 \ imm32 ELF 7e2ec000-7e3de000 Deferred oleaut32 -PE 7e300000-7e3de000 \ oleaut32 ELF 7e3de000-7e418000 Deferred winspool -PE 7e3f0000-7e418000 \ winspool ELF 7e418000-7e4f7000 Deferred comdlg32 -PE 7e420000-7e4f7000 \ comdlg32 ELF 7e4f7000-7e51f000 Deferred msacm32 -PE 7e500000-7e51f000 \ msacm32 ELF 7e51f000-7e5cc000 Deferred winmm -PE 7e530000-7e5cc000 \ winmm ELF 7e5cc000-7e641000 Deferred rpcrt4 -PE 7e5e0000-7e641000 \ rpcrt4 ELF 7e641000-7e749000 Deferred ole32 -PE 7e660000-7e749000 \ ole32 ELF 7e749000-7e841000 Deferred comctl32 -PE 7e750000-7e841000 \ comctl32 ELF 7e841000-7ea52000 Deferred shell32 -PE 7e850000-7ea52000 \ shell32 ELF 7ea52000-7eabc000 Deferred shlwapi -PE 7ea60000-7eabc000 \ shlwapi ELF 7eabc000-7ead5000 Deferred version -PE 7eac0000-7ead5000 \ version ELF 7ead5000-7eb35000 Deferred advapi32 -PE 7eae0000-7eb35000 \ advapi32 ELF 7eb35000-7ebf2000 Deferred gdi32 -PE 7eb40000-7ebf2000 \ gdi32 ELF 7ebf2000-7ed32000 Deferred user32 -PE 7ec00000-7ed32000 \ user32 ELF 7ed32000-7ed58000 Deferred mpr -PE 7ed40000-7ed58000 \ mpr ELF 7ed58000-7ed6e000 Deferred libz.so.1 ELF 7ed6e000-7eddd000 Deferred wininet -PE 7ed80000-7eddd000 \ wininet ELF 7eddd000-7ee0f000 Deferred ws2_32 -PE 7ede0000-7ee0f000 \ ws2_32 ELF 7ee0f000-7ee1c000 Deferred libnss_files.so.2 ELF 7ee1c000-7ee28000 Deferred libnss_nis.so.2 ELF 7ee28000-7ee42000 Deferred libnsl.so.1 ELF 7ee42000-7ee4b000 Deferred libnss_compat.so.2 ELF 7efd4000-7f000000 Deferred libm.so.6 ELF f74a3000-f74a7000 Deferred libxau.so.6 ELF f74a8000-f74ad000 Deferred libdl.so.2 ELF f74ad000-f7657000 Deferred libc.so.6 ELF f7658000-f7673000 Deferred libpthread.so.0 ELF f7675000-f767b000 Deferred libuuid.so.1 ELF f7682000-f77c4000 Dwarf libwine.so.1 ELF f77c6000-f77e8000 Deferred ld-linux.so.2 ELF f77e8000-f77e9000 Deferred [vdso].so Threads: process tid prio (all id:s are in hex) 0000000e services.exe 0000001f 0 0000001e 0 00000015 0 00000010 0 0000000f 0 00000012 winedevice.exe 0000001c 0 00000019 0 00000014 0 00000013 0 0000001a plugplay.exe 00000020 0 0000001d 0 0000001b 0 00000037 explorer.exe 00000038 0 00000042 (D) C:\Program Files (x86)\Amazon\Kindle\Kindle.exe 00000043 0 <== System information: Wine build: wine-1.4 Platform: i386 (WOW64) Host system: Linux Host version: 3.8.11 How can this be fixed?

  Read the article

• jQuery with SharePoint solutions

  - by KunaalKapoor

  For me jQuery is the 'Plan-B' for everything.And most of my projects include the use of jQuery for something or the other, so I decided to write a small note on what works best while using jQuery along with SharePoint.I prefer to use the jQuery JavaScript library, which is far more robust, easier to use, and allows for plugins. Follow the steps below to add jQuery to your master page. For office 365, the prefered location to add jQuery files is the "Site Asserts" library.Deployment Best PracticesThey are only as good as the context it’s being referenced.  In other words, take into account your world before applying it.Script your deployment options.  Folder in SPD. Use the file system.  Make external references.  The JQuery library is on the Microsoft Ajax Content Delivery Network. You may even choose to publish to and from the document library. (pros and cons to this approach)Reference options when referencing the script.ScriptLink will make sure it’s loaded at the top of the page and only loaded once. You need Visual Studio or SPDContent Editor Web Part (CEWP).  Drop it on the page and it’s there.  Easy but dangerousCustom Actions. Great for global deployments of JQuery.  Loads it on every page. It also works in Sandbox installations.Deployment Maintenance Dont’sDon’t add scripts directly to your Master Page. That’s way too much effort because the pages are hard to maintain.Don’t add scripts directly to the CEWP.  Use a content link instead. That will allow for reuse. If you or someone deletes the CEWP you won’t lose code in the web partSecurity.  Any scripts run with the same privileges of the current user.  In other words, you can’t get in trouble.Development Best PracticesDon’t abuse the DOM.  There are better options to load the DOM without hitting it 1,000 times.User other performance boosters.Try other libraries.  Try some custom codeAvoid String conversionMinify your filesUse CAML to reduce number of returns rowsOnly update your JQuery library AFTER RIGOROUS REGRESSION TESTINGCRUD operations can come with some funSP Services wraps SharePoint’s web services for executionThe Bing SDK is pretty easy to use.  You can add it to your page with a script,  put it into a content editor web part and connect it from the address parameters in a list.Steps:1. Go to jquery.com and download the latest jQuery library to your desktop. You want to get the compressed production version, not the development version.2. Open SharePoint Designer (SPD) and connect to the root level of your site's site collection.In SPD, open the "Style Library" folder. Create a folder named "Scripts" inside of the Style Library. Drag the jQuery library JavaScript file from your desktop into the Scripts folder.In the Scripts folder, create a new JavaScript file and name it (e.g. "actions.js").3. If you are using visual studio add a folder for js, you can create a new folder at the root level or if you prefer more cleaner solutions like me, you can use the layouts folder which cleans out on deactivation/uninstall.4. Within the <head> tag of the master page, add a script reference to the jQuery library just above the content place holder named "PlaceHolderAdditonalPageHead" (and above your custom CSS references, if applicable) as follows:<script src="/Style%20Library/Scripts/{jquery library file}.js" type="text/javascript"></script>Immediately after the jQuery library reference add a script reference to your custom scripts file as follows:<script src="/Style%20Library/Scripts/actions.js" type="text/javascript"></script>Inside your script tag, you can test if jQuery is already defined and if not, then add it to the page.<script type='text/javascript'>  if (typeof jQuery == 'undefined')    document.write('<scr'+'ipt type="text/javascript" src="http://code.jquery.com/jquery-1.6.1.min.js"></sc'+'ript>');</script>For the inquisitive few... Read on if you'd like :)Why jQuery on SharePoiny is AwesomeIt’s all about that visual wow factor.  You can get past that, “But it looks like SharePoint”  Take a long list view and put it into JQuery with pagination, etc and you are the hero.  It’s also about new controls you get with JQuery that you couldn’t do before.Why jQuery with SharePoint should be AwfulAlthough it’s fairly easy to get jQuery up and running. Copy/Paste can cause a problem.  If you don’t understand what it’s doing in the Client Object Model and the Document Object Model then it will do things on your site that were completely unexpected. Many blogs will note workarounds they employed on their sites. Why it’s not working: Debugging “sucks”.You need to develop small blocks of functionality, Test it by putting in some alerts  and console.log. Set breakpoints and monitor the DOM via Firebug and some IE development toolsPerformance - It happens all the time. But you should look at the tradeoffs. More time may give you more functionality.Consistency - ”But it works fine on my computer. So test on many browsers.  Take into account client resourcesHarm the Farm -  You need to code wisely and negatively test.  Don’t be the cause of a DoS attack that’s really JQuery asking for a resource over and over and over again.  So code wisely. Do negative testing. Monitor Server Resources.They also did a demo where JQuery did an endless loop to pull data from a list. It’s a poor decision but also an easy mistake.  They spiked their server resources within a couple seconds and had to shut down the call before it brought it down.ConclusionJQuery is now another tool in your tool kit. You don’t have to use it. Use it where it makes sense and where it helps you get your job done.Don’t abuse it, you will pay for it laterIt will add to page bloat so take that into accountIt can slow your performance

  Read the article

• Trouble with AABB collision response and physics

  - by WCM

  I have been racking my brain trying to figure out a problem I am having with physics and basic AABB collision response. I am fairly close as the physics are mostly right. Gravity feels good and movement is solid. The issue I am running into is that when I land on the test block in my project, I can jump off of it most of the time. If I repeatedly jump in place, I will eventually get stuck one or two pixels below the surface of the test block. If I try to jump, I can become free of the other block, but it will happen again a few jumps later. I feel like I am missing something really obvious with this. I have two functions that support the detection and function to return a vector for the overlap of the two rectangle bounding boxes. I have a single update method that is processing the physics and collision for the entity. I feel like I am missing something very simple, like an ordering of the physics vs. collision response handling. Any thoughts or help can be appreciated. I apologize for the format of the code, tis prototype code mostly. The collision detection function: public static bool Collides(Rectangle source, Rectangle target) { if (source.Right < target.Left || source.Bottom < target.Top || source.Left > target.Right || source.Top > target.Bottom) { return false; } return true; } The overlap function: public static Vector2 GetMinimumTranslation(Rectangle source, Rectangle target) { Vector2 mtd = new Vector2(); Vector2 amin = source.Min(); Vector2 amax = source.Max(); Vector2 bmin = target.Min(); Vector2 bmax = target.Max(); float left = (bmin.X - amax.X); float right = (bmax.X - amin.X); float top = (bmin.Y - amax.Y); float bottom = (bmax.Y - amin.Y); if (left > 0 || right < 0) return Vector2.Zero; if (top > 0 || bottom < 0) return Vector2.Zero; if (Math.Abs(left) < right) mtd.X = left; else mtd.X = right; if (Math.Abs(top) < bottom) mtd.Y = top; else mtd.Y = bottom; // 0 the axis with the largest mtd value. if (Math.Abs(mtd.X) < Math.Abs(mtd.Y)) mtd.Y = 0; else mtd.X = 0; return mtd; } The update routine (gravity = 0.001f, jumpHeight = 0.35f, moveAmount = 0.15f): public void Update(GameTime gameTime) { Acceleration.Y = gravity; Position += new Vector2((float)(movement * moveAmount * gameTime.ElapsedGameTime.TotalMilliseconds), (float)(Velocity.Y * gameTime.ElapsedGameTime.TotalMilliseconds)); Velocity.Y += Acceleration.Y; Vector2 previousPosition = new Vector2((int)Position.X, (int)Position.Y); KeyboardState keyboard = Keyboard.GetState(); movement = 0; if (keyboard.IsKeyDown(Keys.Left)) { movement -= 1; } if (keyboard.IsKeyDown(Keys.Right)) { movement += 1; } if (Position.Y + 16 > GameClass.Instance.GraphicsDevice.Viewport.Height) { Velocity.Y = 0; Position = new Vector2(Position.X, GameClass.Instance.GraphicsDevice.Viewport.Height - 16); IsOnSurface = true; } if (Collision.Collides(BoundingBox, GameClass.Instance.block.BoundingBox)) { Vector2 mtd = Collision.GetMinimumTranslation(BoundingBox, GameClass.Instance.block.BoundingBox); Position += mtd; Velocity.Y = 0; IsOnSurface = true; } if (keyboard.IsKeyDown(Keys.Space) && !previousKeyboard.IsKeyDown(Keys.Space)) { if (IsOnSurface) { Velocity.Y = -jumpHeight; IsOnSurface = false; } } previousKeyboard = keyboard; } This is also a full download to the project. https://www.box.com/s/3rkdtbso3xgfgc2asawy P.S. I know that I could do this with the XNA Platformer Starter Kit algo, but it has some deep flaws that I am going to try to live without. I'd rather go the route of collision response via an overlay function. Thanks for any and all insight!

  Read the article

• Modifying the SL/WIF Integration Bits to support Issued Token Credentials

  - by Your DisplayName here!

  The SL/WIF integration code that ships with the Identity Training Kit only supports Windows and UserName credentials to request tokens from an STS. This is fine for simple single STS scenarios (like a single IdP). But the more common pattern for claims/token based systems is to split the STS roles into an IdP and a Resource STS (or whatever you wanna call it). In this case, the 2nd leg requires to present the issued token from the 1st leg – this is not directly supported by the bits. But they can be easily modified to accomplish this. The Credential Fist we need a class that represents an issued token credential. Here we store the RSTR that got returned from the client to IdP request: public class IssuedTokenCredentials : IRequestCredentials {     public string IssuedToken { get; set; }     public RequestSecurityTokenResponse RSTR { get; set; }     public IssuedTokenCredentials(RequestSecurityTokenResponse rstr)     {         RSTR = rstr;         IssuedToken = rstr.RequestedSecurityToken.RawToken;     } } The Binding Next we need a binding to be used with issued token credential requests. This assumes you have an STS endpoint for mixed mode security with SecureConversation turned off. public class WSTrustBindingIssuedTokenMixed : WSTrustBinding {     public WSTrustBindingIssuedTokenMixed()     {         this.Elements.Add( new HttpsTransportBindingElement() );     } } WSTrustClient The last step is to make some modifications to WSTrustClient to make it issued token aware. In the constructor you have to check for the credential type, and if it is an issued token, store it away. private RequestSecurityTokenResponse _rstr; public WSTrustClient( Binding binding, EndpointAddress remoteAddress, IRequestCredentials credentials )     : base( binding, remoteAddress ) {     if ( null == credentials )     {         throw new ArgumentNullException( "credentials" );     }     if (credentials is UsernameCredentials)     {         UsernameCredentials usernname = credentials as UsernameCredentials;         base.ChannelFactory.Credentials.UserName.UserName = usernname.Username;         base.ChannelFactory.Credentials.UserName.Password = usernname.Password;     }     else if (credentials is IssuedTokenCredentials)     {         var issuedToken = credentials as IssuedTokenCredentials;         _rstr = issuedToken.RSTR;     }     else if (credentials is WindowsCredentials)     { }     else     {         throw new ArgumentOutOfRangeException("credentials", "type was not expected");     } } Next – when WSTrustClient constructs the RST message to the STS, the issued token header must be embedded when needed: private Message BuildRequestAsMessage( RequestSecurityToken request ) {     var message = Message.CreateMessage( base.Endpoint.Binding.MessageVersion ?? MessageVersion.Default,       IssueAction,       (BodyWriter) new WSTrustRequestBodyWriter( request ) );     if (_rstr != null)     {         message.Headers.Add(new IssuedTokenHeader(_rstr));     }     return message; } HTH

  Read the article

• YouTube SEO: Video Optimization

  - by Mike Stiles

  SEO optimization is still regarded as one of the primary tools in the digital marketing kit. However and wherever a potential customer is conducting a search, brands want their content to surface in the top results. Makes sense. But without a regular flow of good, relevant content, your SEO opportunities run shallow. We know from several studies video is one of the most engaging forms of content, so why not make sure that in addition to being cool, your videos are helping you win the SEO game? Keywords:-Decide what search phrases make the most sense for your video. Don’t dare use phrases that have nothing to do with the content. You’ll make people mad.-Research those keywords to see how competitive they are. Adjust them so there are still lots of people searching for it, but there are not as many links showing up for it.-Search your potential keywords and phrases to see what comes up. It’s amazing how many people forget to do that. Video Title: -Try to start and/or end with your keyword.-When you search on YouTube, visual action words tend to come up as suggested searches. So try to use action words. Video Description: -Lead with a link to your site (include http://). -Don’t stuff this with your keyword. It leads to bad writing and it won’t work anyway. This is where you convince people to watch, so write for humans. Use some showmanship. -At the end, do a call to action (subscribe, see the whole playlist, visit our social channels, etc.) Video Tags:-Don’t over-tag. 5-10 tags per video is plenty. -If you’re compelled to have more than 10, that means you should probably make more videos specifically targeting all those keywords. Find Linking Pals:-45% of videos are discovered on video sites. But 44% are found through links on blogs and sites.-Write a blog about your video’s content, then link to the video in it. -A good site for finding places to guest blog is myblogguest.com-Once you find good linking partners, they’ll link to your future videos (as long as they’re good and you’re returning the favor). Tap the Power of Similar Videos:-Use Video Reply to associate your video with other topic-related videos. That’s when you make a video responding to or referencing a video made by someone else. Content:-Again, build up a portfolio of videos, not just one that goes after 30 keywords.-Create shorter, sequential videos that pull them deeper into the content and closer to a desired final action.-Organize your video topics separately using Playlists. Playlists show up as a whole in search results like individual videos, so optimize playlists the same as you would for a video. Meta Data:-Too much importance is placed on it. It accounts for only 15% of search success.-YouTube reads Captions or Transcripts to determine what a video is about. If you’re not using them, you’re missing out.-You get the SEO benefit of captions and transcripts whether the viewers has them toggled on or not. Promotion:-This accounts for 25% of search success.-Promote the daylights out of your videos using your social channels and digital assets. Don’t assume it’s going to magically get discovered. -You can pay to promote your video. This could surface it on the YouTube home page, YouTube search results, YouTube related videos, and across the Google content network. Community:-Accounts for 10% of search success.-Make sure your YouTube home page is a fun place to spend time. Carefully pick your featured video, and make sure your Playlists are featured. -Participate in discussions so users will see you’re present. The volume of ratings/comments is as important as the number of views when it comes to where you surface on search. Video Sitemaps:-As with a web site, a video sitemap helps Google quickly index your video.-Google wants to know title, description, play page URL, the URL of the thumbnail image you want, and raw video file location.-Sitemaps are xml files you host or dynamically generate on your site. Once you’ve made your sitemap, sign in and submit it using Google webmaster tools. Just as with the broadcast and cable TV channels, putting a video out there is only step one. You also have to make sure everybody knows it’s there so the largest audience possible can see it. Here’s hoping you get great ratings. @mikestiles

  Read the article

• Certificate Trusts Lists in IIS7

  - by BrettRobi

  I am trying to enable mutual authentication for my WebService hosted in IIS7. I have the server side cert setup and working but cannot figure out how to get a Certificate Trust List created and setup in IIS7 so that I can require and validate client side certificates. All of my client side certs are signed by my own root cert so I need to create a CTL that contains just my root cert and then have IIS validate client provided certs against the CTL. Can anyone shed some light on how to do this? IIS6 had a UI for assigning a CTL, but I can find nothing similar in IIS7. Update: I have now successfully used MakeCTL in wizard mode to create a CTL with a Friendly Name. However I don't have adsutil support on my IIS7 box so via other posts elsewhere I am trying to use the 'netsh http add sslcert' command to assign the CTL to my site. Before I could use this command I had to remove the existing SSL cert that was assigned to my site for server authentication. Then in my netsh command I specify the thumbprint of that very same SSL cert I removed, plus a made up appid, plus 'sslctlidentifier=MyCTL sslctlstorename=CA'. The resulting command is: netsh http add sslcert ipport=10.10.10.10:443 certhash=adfdffa988bb50736b8e58a54c1eac26ed005050 appid={ffc3e181-e14b-4a21-b022-59fc669b09ff} sslctlidentifier=MyCTL sslctlstorename=CA (the IP addr is munged), but I am getting this error: SSL Certificate add failed, Error: 1312 A specified logon session does not exist. It may already have been terminated. I am sure the error is related to the CTL options because if I remove them it works (though no CTL is assigned of course). Can anyone help me take this last step and make this work? UPDATE 01-07-2010: I never resolved this with IIS 7.0 and have since migrated our app to IIS 7.5 and am giving this another try. Per the response from Taras Chuhay I installed IIS6 Compatibility on my test server and tried the steps he documented using adsutil.vbs (which can also be found here). I immediately ran into this error: ErrNumber: -2147023584 Error trying to SET the Property: SslCtlIdentifier when running this command: adsutil.vbs set w3svc/1/SslCtlIdentifier MyFriendlyName I then went on to try the next adsutil.vbs command documented and it failed with the same error. I have verified that the CTL I created has a Friendly Name of MyFriendlyName and that it exists in the 'Intermediate Certification Authorities\Certificate Trust List' store of LocalComputer. So once again I am at a dead standstill. I don't know what else to try. Has anyone ever gotten CTL's to work with IIS7 or 7.5? Ever? Am I beating a DEAD horse. Google turns up nothing but my own posts and other similar stories. Update 2/23/10 - I've confirmed with Microsoft that this is a bug with IIS 7.5, but it does work with IIS 7. Check out this link for details: http://viisual.net/configuration/IIS7-CTLs.htm Update 6/08/10 - I can now confirm that KB981506 resolves this issue. There is a patch associated with this KB that must be applied to Server 2008 R2 machines to enable this functionality. Once that is installed all works flawlessly for me.

  Read the article

• Slow login to load-balanced Terminal Server 2008 behind Gateway Server

  - by Frans

  I have a small load-balanced (using Session Broker) Terminal Server 2008 farm behind a Gateway Server which is accessed from the Internet. The problem I have is that there is a delay of 20-30 seconds if the session broker switches the user to another server during login. I think this is related to the fact that I am forcing the security layer to be RDP rather than SSL. The background The Gateway server has a public routeable IP addres and DNS name so it can be accessed from the Internet and all users come in via this route (the system is used to provide access to hosted applications to external customers). The actual terminal servers only have internal IP addresses. This works really well, except that with a Vista or Windows 7 client, the Remote Desktop client will negotiate with the server to use SSL for the security layer. This then exposes the auto-generated certificate that TS1 or TS2 has - but since they are internal, auto-generated certificates, the client will get a stern warning that the certificate is not valid. I can't give the servers a properly authorised certificate as the servers do not have public routeable IP address or DNS name. Instead, I am using Group Policy to force the connections to be over RDP instead of SSL. \Computer Configuration\Policies\Administrative Templates\Windows Components\Terminal Services\Terminal Server\Security\Require use of specific security layer for remote (RDP) connections The Windows 7 user now gets a much less stern warning that "the server's identity cannot be confirmed" which I can live with. I don't have enough control over the end-user's machines to ask them to install a new root certificate either. TS1 and TS2 are also load-balanced using the Session Broker, which is installed on the Gateway Server. I am using round-robin DNS, so the user's initial connection will go via Gateway1 to either TS1 or TS2. TS1/TS2 will then talk to the session broker and may pass the user to the other server. I.e. the user may get connected to TS2, but after talking to the session broker the user may be passed to TS1, which is where they will run their session. When this switching of servers happens, in my setup, the screen sits with the word "Welcome" for 20-30 seconds after which it flickers, Welcome is shown again and then flashing through nthe normal login screens (i.e. "wait for user profile manager" etc). Having done some research, I think what is happening is that the user is being fully logged on to TS2 (while "Welcome" is shown) before being passed to TS1, where they are then logged in again. It is interesting that normally when you see the ""Welcome" word, the little circle to left rotates. However, it does not rotate during this delay - the screen just looks frozen. This blog post leads me to think that this is because CredSSP is not being used, probably because I am disallowing SSL and forcing RDP. What I have tried I enabled SSL again which removes the "Welcome" delay. However, it seems to introduc a new delay much earlier in the process. Specifically, when the RDP client is saying "initialising connection" - this is now much slower. Quite apart from the fact that my certificate problem precludes me using that solution without considerable difficulty. I tried disabling the load balancing (just remove the servers from the session broker farm) and the connections do not have any delay. The problem is also intermittent in the sense that it only happens when the user gets bumped from one server to another. I tested this by trying to connect directly to TS1 (via the Gateway, of course) and then checking which server I actually got connected to. Just to be sure, I also by-passed the round-robin DNS to see if it had any impact and it doesn't. The setup is essentially in line with MS recommendations here: TS Session Broker Load Balancing Step-by-Step Guide I tried changing to using a dedicated redirector. Basically, rather than using a round-robin DNS, I pointed my DNS to the Gateway server and configured it to be a dedicated redirector (disallow logons, add it to the farm). Same problem, alas. Any ideas or suggestions gratefully received.

  Read the article

• Error when installing Lync Server, "Installing OcsCore.msi(Feature_LocalMgmtStore)...failure code 1603"

  - by Trikks

  Im battling to install Lync Server in a test environment and are at the "Install Local Configuration Store" step. The prerequisites seems alright but bombs when installing the OcsCore.msi ... Checking prerequisite SqlNativeClient...prerequisite satisfied. Checking prerequisite SqlBackcompat...prerequisite satisfied. Checking prerequisite UcmaRedist...prerequisite satisfied. Installing OcsCore.msi(Feature_LocalMgmtStore)...failure code 1603 Error returned while installing OcsCore.msi(Feature_LocalMgmtStore), code 1603. Please consult log at C:\Users\Administrator.HAWC\AppData\Local\Temp\1\Add-OcsCore.msi-Feature_LocalMgmtStore-[2012_07_08][12_00_27].log The logfile doesn't really help me either, this is the end of it Property(S): Privileged = 1 Property(S): USERNAME = Windows User Property(S): DATABASE = C:\Windows\Installer\9525f.msi Property(S): OriginalDatabase = C:\ProgramData\Microsoft\Lync Server\Deployment\cache\4.0.7577.0\setup\OcsCore.msi Property(S): UILevel = 2 Property(S): Preselected = 1 Property(S): ACTION = INSTALL Property(S): WIX_ACCOUNT_LOCALSYSTEM = NT AUTHORITY\SYSTEM Property(S): WIX_ACCOUNT_LOCALSERVICE = NT AUTHORITY\LOCAL SERVICE Property(S): WIX_ACCOUNT_NETWORKSERVICE = NT AUTHORITY\NETWORK SERVICE Property(S): WIX_ACCOUNT_ADMINISTRATORS = BUILTIN\Administrators Property(S): WIX_ACCOUNT_USERS = BUILTIN\Users Property(S): WIX_ACCOUNT_GUESTS = BUILTIN\Guests Property(S): ROOTDRIVE = C:\ Property(S): CostingComplete = 1 Property(S): OutOfDiskSpace = 0 Property(S): OutOfNoRbDiskSpace = 0 Property(S): PrimaryVolumeSpaceAvailable = 0 Property(S): PrimaryVolumeSpaceRequired = 0 Property(S): PrimaryVolumeSpaceRemaining = 0 Property(S): INSTALLLEVEL = 1 Property(S): SOURCEDIR = C:\ProgramData\Microsoft\Lync Server\Deployment\cache\4.0.7577.0\setup\ Property(S): SourcedirProduct = {9521B708-9D80-46A3-9E58-A74ACF4E343E} === Logging stopped: 2012-07-08 12:01:46 === MSI (s) (98:F8) [12:01:46:354]: Note: 1: 1729 MSI (s) (98:F8) [12:01:46:354]: Product: Microsoft Lync Server 2010, Core Components -- Configuration failed. MSI (s) (98:F8) [12:01:46:354]: Windows Installer reconfigured the product. Product Name: Microsoft Lync Server 2010, Core Components. Product Version: 4.0.7577.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status: 1603. MSI (s) (98:F8) [12:01:46:356]: Deferring clean up of packages/files, if any exist MSI (s) (98:F8) [12:01:46:356]: MainEngineThread is returning 1603 MSI (s) (98:84) [12:01:46:362]: RESTART MANAGER: Session closed. MSI (s) (98:84) [12:01:46:362]: No System Restore sequence number for this installation. MSI (s) (98:84) [12:01:46:363]: User policy value 'DisableRollback' is 0 MSI (s) (98:84) [12:01:46:363]: Machine policy value 'DisableRollback' is 0 MSI (s) (98:84) [12:01:46:363]: Incrementing counter to disable shutdown. Counter after increment: 0 MSI (s) (98:84) [12:01:46:364]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2 MSI (s) (98:84) [12:01:46:364]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2 MSI (s) (98:84) [12:01:46:364]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1 MSI (s) (98:84) [12:01:46:364]: Restoring environment variables MSI (s) (98:84) [12:01:46:373]: Destroying RemoteAPI object. MSI (s) (98:D4) [12:01:46:373]: Custom Action Manager thread ending. MSI (c) (20:64) [12:01:46:379]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1 MSI (c) (20:64) [12:01:46:380]: MainEngineThread is returning 1603 === Verbose logging stopped: 2012-07-08 12:01:46 === Any advice where to start in this? Thanks

  Read the article

• nginx: How can I set proxy_* directives only for matching URIs?

  - by Artem Russakovskii

  I've been at this for hours and I can't figure out a clean solution. Basically, I have an nginx proxy setup, which works really well, but I'd like to handle a few urls more manually. Specifically, there are 2-3 locations for which I'd like to set proxy_ignore_headers to Set-Cookie to force nginx to cache them (nginx doesn't cache responses with Set-Cookie as per http://wiki.nginx.org/HttpProxyModule#proxy_ignore_headers). So for these locations, all I'd like to do is set proxy_ignore_headers Set-Cookie; I've tried everything I could think of outside of setting up and duplicating every config value, but nothing works. I tried: Nesting location directives, hoping the inner location which matches on my files would just set this value and inherit the rest, but that wasn't the case - it seemed to ignore anything set in the outer location, most notably proxy_pass and I end up with a 404). Specifying the proxy_cache_valid directive in an if block that matches on $request_uri, but nginx complains that it's not allowed ("proxy_cache_valid" directive is not allowed here). Specifying a variable equal to "Set-Cookie" in an if block, and then trying to set proxy_cache_valid to that variable later, but nginx isn't allowing variables for this case and throws up. It should be so simple - modifying/appending a single directive for some requests, and yet I haven't been able to make nginx do that. What am I missing here? Is there at least a way to wrap common directives in a reusable block and have multiple location blocks refer to it, after adding their own unique bits? Thank you. Just for reference, the main location / block is included below, together with my failed proxy_ignore_headers directive for a specific URI. location / { # Setup var defaults set $no_cache ""; # If non GET/HEAD, don't cache & mark user as uncacheable for 1 second via cookie if ($request_method !~ ^(GET|HEAD)$) { set $no_cache "1"; } if ($http_user_agent ~* '(iphone|ipod|ipad|aspen|incognito|webmate|android|dream|cupcake|froyo|blackberry|webos|s8000|bada)') { set $mobile_request '1'; set $no_cache "1"; } # feed crawlers, don't want these to get stuck with a cached version, especially if it caches a 302 back to themselves (infinite loop) if ($http_user_agent ~* '(FeedBurner|FeedValidator|MediafedMetrics)') { set $no_cache "1"; } # Drop no cache cookie if need be # (for some reason, add_header fails if included in prior if-block) if ($no_cache = "1") { add_header Set-Cookie "_mcnc=1; Max-Age=17; Path=/"; add_header X-Microcachable "0"; } # Bypass cache if no-cache cookie is set, these are absolutely critical for Wordpress installations that don't use JS comments if ($http_cookie ~* "(_mcnc|comment_author_|wordpress_(?!test_cookie)|wp-postpass_)") { set $no_cache "1"; } if ($request_uri ~* wpsf-(img|js)\.php) { proxy_ignore_headers Set-Cookie; } # Bypass cache if flag is set proxy_no_cache $no_cache; proxy_cache_bypass $no_cache; # under no circumstances should there ever be a retry of a POST request, or any other request for that matter proxy_next_upstream off; proxy_read_timeout 86400s; # Point nginx to the real app/web server proxy_pass http://localhost; # Set cache zone proxy_cache microcache; # Set cache key to include identifying components proxy_cache_key $scheme$host$request_method$request_uri$mobile_request; # Only cache valid HTTP 200 responses for this long proxy_cache_valid 200 15s; #proxy_cache_min_uses 3; # Serve from cache if currently refreshing proxy_cache_use_stale updating timeout; # Send appropriate headers through proxy_set_header Host $host; # no need for this proxy_set_header X-Real-IP $remote_addr; # no need for this proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; # Set files larger than 1M to stream rather than cache proxy_max_temp_file_size 1M; access_log /var/log/nginx/androidpolice-microcache.log custom; }

  Read the article

• Cisco ASA (Client VPN) to LAN - through second VPN to second LAN

  - by user50855

  We have 2 site that is linked by an IPSEC VPN to remote Cisco ASAs: Site 1 1.5Mb T1 Connection Cisco(1) 2841 Site 2 1.5Mb T1 Connection Cisco 2841 In addition: Site 1 has a 2nd WAN 3Mb bonded T1 Connection Cisco 5510 that connects to same LAN as Cisco(1) 2841. Basically, Remote Access (VPN) users connecting through Cisco ASA 5510 needs access to a service at the end of Site 2. This is due to the way the service is sold - Cisco 2841 routers are not under our management and it is setup to allow connection from local LAN VLAN 1 IP address 10.20.0.0/24. My idea is to have all traffic from Remote Users through Cisco ASA destined for Site 2 to go via the VPN between Site 1 and Site 2. The end result being all traffic that hits Site 2 has come via Site 1. I'm struggling to find a great deal of information on how this is setup. So, firstly, can anyone confirm that what I'm trying to achieve is possible? Secondly, can anyone help me to correct the configuration bellow or point me in the direction of an example of such a configuration? Many Thanks. interface Ethernet0/0 nameif outside security-level 0 ip address 7.7.7.19 255.255.255.240 interface Ethernet0/1 nameif inside security-level 100 ip address 10.20.0.249 255.255.255.0 object-group network group-inside-vpnclient description All inside networks accessible to vpn clients network-object 10.20.0.0 255.255.255.0 network-object 10.20.1.0 255.255.255.0 object-group network group-adp-network description ADP IP Address or network accessible to vpn clients network-object 207.207.207.173 255.255.255.255 access-list outside_access_in extended permit icmp any any echo-reply access-list outside_access_in extended permit icmp any any source-quench access-list outside_access_in extended permit icmp any any unreachable access-list outside_access_in extended permit icmp any any time-exceeded access-list outside_access_in extended permit tcp any host 7.7.7.20 eq smtp access-list outside_access_in extended permit tcp any host 7.7.7.20 eq https access-list outside_access_in extended permit tcp any host 7.7.7.20 eq pop3 access-list outside_access_in extended permit tcp any host 7.7.7.20 eq www access-list outside_access_in extended permit tcp any host 7.7.7.21 eq www access-list outside_access_in extended permit tcp any host 7.7.7.21 eq https access-list outside_access_in extended permit tcp any host 7.7.7.21 eq 5721 access-list acl-vpnclient extended permit ip object-group group-inside-vpnclient any access-list acl-vpnclient extended permit ip object-group group-inside-vpnclient object-group group-adp-network access-list acl-vpnclient extended permit ip object-group group-adp-network object-group group-inside-vpnclient access-list PinesFLVPNTunnel_splitTunnelAcl standard permit 10.20.0.0 255.255.255.0 access-list inside_nat0_outbound_1 extended permit ip 10.20.0.0 255.255.255.0 10.20.1.0 255.255.255.0 access-list inside_nat0_outbound_1 extended permit ip 10.20.0.0 255.255.255.0 host 207.207.207.173 access-list inside_nat0_outbound_1 extended permit ip 10.20.1.0 255.255.255.0 host 207.207.207.173 ip local pool VPNPool 10.20.1.100-10.20.1.200 mask 255.255.255.0 route outside 0.0.0.0 0.0.0.0 7.7.7.17 1 route inside 207.207.207.173 255.255.255.255 10.20.0.3 1 crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto dynamic-map outside_dyn_map 20 set security-association lifetime seconds 288000 crypto dynamic-map outside_dyn_map 20 set security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set reverse-route crypto map outside_map 20 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto map outside_dyn_map 20 match address acl-vpnclient crypto map outside_dyn_map 20 set security-association lifetime seconds 28800 crypto map outside_dyn_map 20 set security-association lifetime kilobytes 4608000 crypto isakmp identity address crypto isakmp enable outside crypto isakmp policy 20 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 group-policy YeahRightflVPNTunnel internal group-policy YeahRightflVPNTunnel attributes wins-server value 10.20.0.9 dns-server value 10.20.0.9 vpn-tunnel-protocol IPSec password-storage disable pfs disable split-tunnel-policy tunnelspecified split-tunnel-network-list value acl-vpnclient default-domain value YeahRight.com group-policy YeahRightFLVPNTunnel internal group-policy YeahRightFLVPNTunnel attributes wins-server value 10.20.0.9 dns-server value 10.20.0.9 10.20.0.7 vpn-tunnel-protocol IPSec split-tunnel-policy tunnelspecified split-tunnel-network-list value YeahRightFLVPNTunnel_splitTunnelAcl default-domain value yeahright.com tunnel-group YeahRightFLVPN type remote-access tunnel-group YeahRightFLVPN general-attributes address-pool VPNPool tunnel-group YeahRightFLVPNTunnel type remote-access tunnel-group YeahRightFLVPNTunnel general-attributes address-pool VPNPool authentication-server-group WinRadius default-group-policy YeahRightFLVPNTunnel tunnel-group YeahRightFLVPNTunnel ipsec-attributes pre-shared-key *

  Read the article

• Why can't I build Deluge?

  - by hugemeow

  Deluge is a BitTorrent Client. I am trying to build it from source, since I don't have privilege to install it as root. I am using python setup.py build. But, it failed following message, why? copying deluge/ui/web/themes/images/gray/slider/slider-v-thumb.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/gray/slider copying deluge/ui/web/themes/images/gray/slider/slider-thumb.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/gray/slider copying deluge/ui/web/themes/images/gray/panel/top-bottom.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/gray/panel copying deluge/ui/web/themes/images/gray/tabs/tab-strip-bg.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/gray/tabs copying deluge/ui/web/themes/images/yourtheme/window/right-corners.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/yourtheme/window copying deluge/ui/web/themes/images/yourtheme/window/left-corners.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/yourtheme/window copying deluge/ui/web/themes/images/yourtheme/window/left-right.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/yourtheme/window copying deluge/ui/web/themes/images/yourtheme/window/top-bottom.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/yourtheme/window creating build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/yourtheme/slider copying deluge/ui/web/themes/images/yourtheme/slider/slider-v-thumb.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/yourtheme/slider copying deluge/ui/web/themes/images/yourtheme/slider/slider-thumb.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/yourtheme/slider copying deluge/ui/web/themes/images/yourtheme/slider/slider-bg.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/yourtheme/slider copying deluge/ui/web/themes/images/yourtheme/slider/slider-v-bg.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/yourtheme/slider copying deluge/ui/web/themes/images/yourtheme/panel/top-bottom.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/yourtheme/panel copying deluge/ui/web/themes/images/yourtheme/grid/hmenu-lock.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/yourtheme/grid copying deluge/ui/web/themes/images/yourtheme/grid/hmenu-unlock.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/yourtheme/grid copying deluge/ui/web/themes/images/yourtheme/tabs/tab-strip-bg.png -> build/lib.linux-x86_64-2.4/deluge/ui/web/themes/images/yourtheme/tabs running build_ext building 'libtorrent' extension gcc -pthread -shared -L/usr/lib64 -L/opt/local/lib -lboost_filesystem -lboost_date_time -lboost_iostreams -lboost_python -lboost_thread -lpthread -lssl -lz -o build/lib.linux-x86_64-2.4/deluge/libtorrent.so /usr/bin/ld: cannot find -lboost_filesystem collect2: ld returned 1 exit status error: command 'gcc' failed with exit status 1 [mirror@innov deluge-1.3.5]$ echo $? 1 Edit 1: gcc version and os information $(which gcc) --version gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-52) Copyright (C) 2006 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. cat /etc/issue CentOS release 5.7 (Final) Kernel \r on an \m Edit 2: boost is referenced by setup.py in deluge 114 if OS == "linux": 115 if os.path.exists(os.path.join(sysconfig.get_config_vars()['LIBDIR'], \ 116 'libboost_filesystem-mt.so')): 117 boost_filesystem = "boost_filesystem-mt" 118 elif os.path.exists(os.path.join(sysconfig.get_config_vars()['LIBDIR'], \ 119 'libboost_filesystem.so')): 120 boost_filesystem = "boost_filesystem" 121 if os.path.exists(os.path.join(sysconfig.get_config_vars()['LIBDIR'], \ 122 'libboost_date_time-mt.so')): 123 boost_date_time = "boost_date_time-mt" 124 elif os.path.exists(os.path.join(sysconfig.get_config_vars()['LIBDIR'], \ 125 'libboost_date_time.so')): 126 boost_date_time = "boost_date_time" 127 if os.path.exists(os.path.join(sysconfig.get_config_vars()['LIBDIR'], \ 128 'libboost_thread-mt.so')): 129 boost_thread = "boost_thread-mt" 130 elif os.path.exists(os.path.join(sysconfig.get_config_vars()['LIBDIR'], \ 131 'libboost_thread.so')): 132 boost_thread = "boost_thread" 133 134 if 'boost_filesystem' not in vars(): 135 boost_filesystem = "boost_filesystem-mt" 136 if 'boost_date_time' not in vars(): 137 boost_date_time = "boost_date_time-mt" 138 if 'boost_thread' not in vars(): 139 boost_thread = "boost_thread-mt" 140 141 elif OS == "freebsd": 142 boost_filesystem = "boost_filesystem" 143 boost_date_time = "boost_date_time" 144 boost_thread = "boost_thread" 145 else: 146 boost_filesystem = "boost_filesystem-mt" 147 boost_date_time = "boost_date_time-mt" 148 boost_thread = "boost_thread-mt" 149 150 librariestype = [boost_filesystem, boost_date_time, 151 boost_thread, 'z', 'pthread', 'ssl', 'crypto']

  Read the article

• stunnel crashing

  - by Jay

  I'm trying to use stunnel to secure a legacy application's communications. I can't seem to get it setup and working. Can anyone provide any hints where I'm going wrong? Here's what I'm trying to accomplish: A windows service on a client machine connects to a server on port 7000 using TCP. I'd like to encrypt the communication between client and server. Here's what I've tried: Created a new server that accepts ssl connections on port 7443. Got a certificate for the server and installed it. That seems to work with my test setup. Installed stunnel on my windows machine (version 7.43 from the distribution archive file). Installed libssl32.dll and libeay32.dll in the same directory as stunnel.exe ( from the openssl-0.9.8h-1 binary distribution). Installed it as a service using "stunnel -install" Configured stunnel as follows: debug=7 output=C:\p4\internal\Utility\Proxy\proxy.log service=Proxy taskbar=no [exchange] accept=7000 client=yes connect=proxy.blah.com:7443 I changed my hosts file to trick the old application into connecting through stunnel: server.blah.com 127.0.0.1 # when client looks up server it goes to stunnel proxy.blah.com IP-address-of-server.blah.com # stunnel connects to new server "server.blah.com" now resolves to the machine it's running on (i.e. stunnel). "proxy.blah.com" goes to the real server. stunnel should connect to the server. I start the stunnel service and try to connect. It looks like it's working but the stunnel service just shuts down with no message. 2010.04.19 13:16:21 LOG5[4924:3716]: stunnel 4.33 on x86-pc-mingw32-gnu with OpenSSL 0.9.8h 28 May 2008 2010.04.19 13:16:21 LOG5[4924:3716]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2010.04.19 13:16:49 LOG5[4924:3748]: Service exchange accepted connection from 127.0.0.1:4134 2010.04.19 13:16:49 LOG6[4924:3748]: connect_blocking: connecting x.80.60.32:7443 2010.04.19 13:16:49 LOG5[4924:3748]: connect_blocking: connected x.80.60.32:7443 2010.04.19 13:16:49 LOG5[4924:3748]: Service exchange connected remote server from x.253.120.19:4135 2010.04.19 13:20:24 LOG5[3668:3856]: Reading configuration from file stunnel.conf 2010.04.19 13:20:24 LOG7[3668:3856]: Snagged 64 random bytes from C:/.rnd 2010.04.19 13:20:24 LOG7[3668:3856]: Wrote 1024 new random bytes to C:/.rnd 2010.04.19 13:20:24 LOG7[3668:3856]: RAND_status claims sufficient entropy for the PRNG 2010.04.19 13:20:24 LOG7[3668:3856]: PRNG seeded successfully 2010.04.19 13:20:24 LOG7[3668:3856]: SSL context initialized for service exchange 2010.04.19 13:20:24 LOG5[3668:3856]: Configuration successful 2010.04.19 13:20:24 LOG5[3668:3856]: No limit detected for the number of clients 2010.04.19 13:20:24 LOG7[3668:3856]: FD=312 in non-blocking mode 2010.04.19 13:20:24 LOG7[3668:3856]: Option SO_REUSEADDR set on accept socket 2010.04.19 13:20:24 LOG7[3668:3856]: Service exchange bound to 0.0.0.0:7000 2010.04.19 13:20:24 LOG7[3668:3856]: Service exchange opened FD=312 2010.04.19 13:20:24 LOG5[3668:3856]: stunnel 4.33 on x86-pc-mingw32-gnu with OpenSSL 0.9.8h 28 May 2008 2010.04.19 13:20:24 LOG5[3668:3856]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2010.04.19 13:21:02 LOG7[3668:4556]: Service exchange accepted FD=372 from 127.0.0.1:4156 2010.04.19 13:21:02 LOG7[3668:4556]: Creating a new thread 2010.04.19 13:21:02 LOG7[3668:4556]: New thread created 2010.04.19 13:21:02 LOG7[3668:3756]: Service exchange started 2010.04.19 13:21:02 LOG7[3668:3756]: FD=372 in non-blocking mode 2010.04.19 13:21:02 LOG5[3668:3756]: Service exchange accepted connection from 127.0.0.1:4156 2010.04.19 13:21:02 LOG7[3668:3756]: FD=396 in non-blocking mode 2010.04.19 13:21:02 LOG6[3668:3756]: connect_blocking: connecting x.80.60.32:7443 2010.04.19 13:21:02 LOG7[3668:3756]: connect_blocking: s_poll_wait x.80.60.32:7443: waiting 10 seconds 2010.04.19 13:21:02 LOG5[3668:3756]: connect_blocking: connected x.80.60.32:7443 2010.04.19 13:21:02 LOG5[3668:3756]: Service exchange connected remote server from x.253.120.19:4157 2010.04.19 13:21:02 LOG7[3668:3756]: Remote FD=396 initialized 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): before/connect initialization 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write client hello A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read server hello A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read server certificate A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read server done A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write client key exchange A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write change cipher spec A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write finished A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 flush data 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read finished A The client thinks the connection is closed: No connection could be made because the target machine actively refused it 127.0.0.1:7000 at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress) at System.Net.Sockets.Socket.Connect(EndPoint remoteEP) at Service.ConnUtility.Connect() Any suggestions?

  Read the article

• Setting up apache to view https pages

  - by zac

  I am trying to set up a site using vmware workstation, ubuntu 11.10, and apache2. The site works fine but now the https pages are not showing up. For example if I try to go to https://www.mysite.com/checkout I just see the message Not Found The requested URL /checkout/ was not found on this server. I dont really know what I am doing and have tried a lot of things to get the ssl certificates in there right. A few things I have in there, in my httpd.conf I just have : ServerName localhost In my ports.conf I have : NameVirtualHost *:80 Listen 80 <IfModule mod_ssl.c> # If you add NameVirtualHost *:443 here, you will also have to change # the VirtualHost statement in /etc/apache2/sites-available/default-ssl # to <VirtualHost *:443> # Server Name Indication for SSL named virtual hosts is currently not # supported by MSIE on Windows XP. Listen 443 http </IfModule> <IfModule mod_gnutls.c> Listen 443 http </IfModule> In the /etc/apache2/sites-available/default-ssl : <IfModule mod_ssl.c> <VirtualHost _default_:443> ServerAdmin webmaster@localhost DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> .... truncated in the sites-available/default I have : <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www #DocumentRoot /home/magento/site/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> #<Directory /home/magento/site/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> <virtualhost *:443> SSLEngine on SSLCertificateFile /etc/apache2/ssl/server.crt SSLCertificateKeyFile /etc/apache2/ssl/server.key ServerAdmin webmaster@localhost <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> #<Directory /home/magento/site/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> </virtualhost> I also have in sites-availabe a file setup for my site url, www.mysite.com so in /etc/apache2/sites-available/mysite.com <VirtualHost *:80> ServerName mysite.com DocumentRoot /home/magento/mysite.com <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory /home/magento/mysite.com/ > Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ErrorLog /home/magento/logs/apache.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn </VirtualHost> <VirtualHost *:443> ServerName mysite.com DocumentRoot /home/magento/mysite.com <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory /home/magento/mysite.com/ > Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ErrorLog /home/magento/logs/apache.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn </VirtualHost> Thanks for any help getting this setup! As is probably obvious from this post I am pretty lost at this point.

  Read the article

• Apache outputs all urls of a second domain as a subfolder of the primary domain name

  - by s_rathbone

  Hi all, would anyone be able to possibly give me some guidance.. Basically, i have a 'shared hosting' account with a large internet hosting provider, and my account lets me have multiple seperate domains within this folder structure.(note: not aliased domains and not sub domains). so, my goal is to have 2 domains set up. i have already purchased the two domain names i need: The first domain is the 'primary' domain name for the root folder(eg. www.example1.com) and the second domain name is set for one of its sub folders(eg. www.example2.com is set to the folder www.example1.com/sites/music). The problem is that when apache returns a page of the second domain back to the browser, apache writes the hyperlinks as if it's a sub folder of the first domain ( eg. www.example2.com/index.html. comes out as http://www.example1.com/sites/music/index.html). Now, I have done some reading on this, looking though "Apache: the definitive guide"(o'reilly), and although it was useful, couldn't really find the answer. i'm guessing this issue is most likely an apache setup issue in http.conf, rather than an issue with the hosting company itself (which is why im posting it here) and I have also been to the official documentation for apache site, and i am guessing i might need to use something like the rewritebase directive in htaccess files.. but im really not sure, im more of a java programmer guy, and have been struggling with this for a couple of days. Any guidance would be REALLY appreciated. If it helps, my hosting company is godaddy, and my sites are hosted on linux. My problem was originally with wordpress which i reinstalled a number of times in various ways to correct the problem, but ive just done a test with a very simple static html, and it still has the same issue with relative urls like this: <html> <head></head><body><a href="images/dog.html">Pictures of Dogs</a></body> </html> However, it is fine if i hardcode the urls like this: <html> <head></head><body><a href="http://www.example2.com/images/dog.html">Pictures of Dogs</a></body> </html> Thanks heaps, Steve R NOW FIXED Ok, the problem has now been fixed, and i didn't need to modify any .conf or .htaccess files. The problem was, that when I went to install the second application into a second domain from the godaddy site, one of the setup questions is that it asks you which site you want it installed to. after that it asks for the desired folder path. However, the problem was that the second domain name was already pointing to the correct subfolder of the primary domain. So when I started installing wordpress again and came to the menu to select which site it was for, and it listed only the primary domain as an option, i assumed that this was like a label of "which hosting account?", or "which primary domain will your application will be installed under?" because I already knew that in the next step i was specifiying the folder. In order to correct this, you must make sure that your second domain is added to your domain list so that it will be listed as an option during the installation process. For further details please read tystips.com/archives/52/how2-save-money-host-multiple-wordpress-blogs-on-a-single-godaddy-hosting-account/

  Read the article

• xen debian: domU can't get out side

  - by iftol

  hi every body. i'm a trainee as a sysAdmin, it is my first expérience with virtualization. i have a server setup debian xen 3 with 2 physical interfaces. eth 0 for local network 10.0.0.1 and eth1 for internet (194.X.X.4). i created 3 VMs (web server, mail server and dabase server) with local ip addresses 172.10.0.x/24. the problem i had first is that domU can't ping dom0. i asked the sysAdmin of our ISP and he sais that he fogot to setup the bridginb. so he ceated a bridge with 172.10.0.1/24 after that i was able to ping the real server (194.X.X.4). but i can't go out side from my VMs, how can i fixe this issue? real or physical server ifconfig eth0 Link encap:Ethernet HWaddr 23:26:34:84:ce:xe inet adr:10.1.3.12 Bcast:10.1.3.255 Masque:255.255.255.0 adr inet6: fe80::226:b9ff:fe84:ceb4/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:412006 errors:0 dropped:0 overruns:0 frame:0 TX packets:411296 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 RX bytes:31410957 (29.9 MiB) TX bytes:31178370 (29.7 MiB) Interruption:36 Mémoire:d6000000-d6012100 eth1 Link encap:Ethernet HWaddr 23:26:34:84:ce:xe inet adr:194.x.x.4 Bcast:194.254.167.255 Masque:255.255.255.0 adr inet6: fe80::226:b9ff:fe84:ceb6/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:25872332 errors:0 dropped:0 overruns:0 frame:0 TX packets:414578 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:2642278343 (2.4 GiB) TX bytes:35436775 (33.7 MiB) lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6: ::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1308073 errors:0 dropped:0 overruns:0 frame:0 TX packets:1308073 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:109871395 (104.7 MiB) TX bytes:109871395 (104.7 MiB) peth1 Link encap:Ethernet HWaddr 23:26:34:84:ce:xe UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:31818694 errors:0 dropped:0 overruns:0 frame:0 TX packets:414818 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 RX bytes:5197318822 (4.8 GiB) TX bytes:37904897 (36.1 MiB) Interruption:48 Mémoire:d8000000-d8012100 vif281.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff adr inet6: fe80::fcff:ffff:feff:ffff/64 Scope:Lien UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:207 errors:0 dropped:0 overruns:0 frame:0 TX packets:298 errors:0 dropped:2 overruns:0 carrier:0 collisions:0 lg file transmission:32 RX bytes:24629 (24.0 KiB) TX bytes:28404 (27.7 KiB) vif281.1 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff adr inet6: fe80::fcff:ffff:feff:ffff/64 Scope:Lien UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:45 errors:0 dropped:47063 overruns:0 carrier:0 collisions:0 lg file transmission:32 RX bytes:0 (0.0 B) TX bytes:4449 (4.3 KiB) vif282.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff adr inet6: fe80::fcff:ffff:feff:ffff/64 Scope:Lien UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:78 errors:0 dropped:0 overruns:0 frame:0 TX packets:13 errors:0 dropped:1 overruns:0 carrier:0 collisions:0 lg file transmission:32 RX bytes:5041 (4.9 KiB) TX bytes:714 (714.0 B) xenbr0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff inet adr:172.10.0.1 Bcast:172.10.0.255 Masque:255.255.255.0 adr inet6: fe80::5c72:c6ff:fe49:7fe/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7180 errors:0 dropped:0 overruns:0 frame:0 TX packets:8615 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:756804 (739.0 KiB) TX bytes:791206 (772.6 KiB) brtcl show bridge name bridge id STP enabled interfaces eth1 8000.0026b984ceb6 no peth1 vif281.1 xenbr0 8000.feffffffffff no vif281.0 vif282.0 network-multi-bridge /etc/xen/scripts/network-virtual start vifnum="0" bridgeip="172.10.0.1/24" brnet="172.10.0.0/24" VM webserver eth0 Link encap:Ethernet HWaddr 00:16:3E:42:33:70 inet addr:172.10.0.2 Bcast:172.10.0.255 Mask:255.255.255.0 inet6 addr: fe80::216:3eff:fe42:3370/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3 errors:0 dropped:0 overruns:0 frame:0 TX packets:27 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:126 (126.0 b) TX bytes:2036 (1.9 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Thank you for your help.

  Read the article

• SQL Server Issue: Could not allocate space for object ... primary filegroup is full

  - by Luke

  Trying to figure out a problem at an office that has SQL Server 2005 installed on Windows SBS Server 2008. Here's the setup: It's an office, and the person who set this all up is nowhere to be found. I'm the best hope they have... One of the programs they use on a workstation gives them an error of "Could not allocate space for object 'Billing' in database "MyDatabase" because primary filegroup is full" when trying to save an entry in their software. I searched around for hours, looking for possible solutions. One was to check for available disk space, and another was to defrag. I checked the hard drives on the server, and there is plenty of space free. I also defragged, which may have helped the problem somewhat. It's hard to say, because it seems like with the nature of the error, if you try over and over you might get it to actually save. My next step was to try to see if autogrowth was enabled on the database. This would seem to be a likely / possible solution, but I can't access the database! If I run the SQL Management Studio, I can log in as my Windows user and view the list of databases. However, if I try to do anything (actually view the database, view the properties, add or edit users), I get errors that I don't have permission. For what it's worth, I also tried runing Management Studio as Administrator, in case that would help. No difference, though. Now, what I'm guessing is going on -- from my limited knowledge of SQL and from reading online -- is that though I'm logged in as a Windows administrator, that account does NOT have SQL access. I do see a list of SQL users, including SA, but I again don't have permission to add one or to change the password on an existing one. And nobody at the office has any idea what the SQL passwords could be. So... here's my thinking thus far: 1 - The "Could not allocate" error likely points to a database that needs to be allowed to autogrow. Especially since I verified there is plenty of free space and the HD has been defragmented. 2 - Enabling autogrow would be very easy to do if I had the proper access within SQL Management Stuido. That leads me to this link: http://blogs.technet.com/b/sqlman/archive/2011/06/14/tips-amp-tricks-you-have-lost-access-to-sql-server-now-what.aspx It sounds like it's a step-by-step guide for giving me the access I need to SQL. I'm guessing that if I followed this guide, I would be able to then log in to the SQL server via Management Studio with the proper permissions, and would be able to enable autogrow (or simply view the status of the existing database), and hopefully solve the "Could not allocate space" problem! So I guess I have a few questions: 1 - Would you guys agree with my "diagnosis"? Think I'm barking up the right tree? 2 - Is there any risk at all in hurting / disabling / wrecking the current SQL database or setup with me going through the guide to regain SQL access? I understand that per the guide, I would have to temporarily shut down SQL, so obviously it wouldn't be accessible during that time. But it wouldn't be worth the risk if there's a chance I could mess anything up... Like I said, the workstations ARE currently accessing the database somehow, but nobody knows with what login info or anything. Basically, it's set up, it works (usually), but if they had to reload the software, nobody would know how. Any feedback would be appreciated!! The problem is such that it's not an emergency for them, but an annoyance. If I could fix it, it would be wonderful. But if not, I think they'll manage, especially as they are going to eventually stop using this software. Thank you so much for your time! Luke

  Read the article

• proftpd, dynamic IP, and filezilla: port troubles

  - by Yami

  The basic setup: Two computers, one running proftpd, one attempting to connect via filezilla. Both linux (xubuntu on the server, kubuntu on the client). Both are at the moment behind a router on a residential (read: dynamic IP) connection; the client is a laptop I plan to take away from the home network, so I'll need this to work externally. I have my router set up to allow specific ports forwarded to each machine and, where possible, have plugged in those numbers into proftpd (via gadmin, double-checking the config file) and filezilla. Attempting to connect via active mode using the internal IP works: Status: Connecting to 192.168.1.139:8085... Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER <redacted> Response: 331 Password required for <redacted> Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PORT 192,168,1,52,153,140 Response: 200 PORT command successful Command: LIST Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete Status: Directory listing successful Attempting to connect via the domain name, however, leads to issues; in active mode, the PORT is the last command to be received according to the server's logs, and in passive mode, it's the PASV command. This leads me to believe I'm being redirected to a bad port? Active Sample: Status: Resolving address of <url> Status: Connecting to <ip:port> Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER <redacted> Response: 331 Password required for <redacted> Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PORT 174,111,127,27,153,139 Response: 200 PORT command successful Command: LIST Error: Connection timed out Error: Failed to retrieve directory listing Passive sample: Status: Resolving address of ftp.bonsaiwebdesigns.com Status: Connecting to 174.111.127.27:8085... Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER yamikuronue Response: 331 Password required for yamikuronue Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (64,95,64,197,101,88). Command: LIST Error: Connection timed out Error: Failed to retrieve directory listing In both cases, the log file ends at "PORT" or "PASV" - there's no record of ever receiving a "LIST" command. Just above that I can see the attempt to connect actively via the internal IP, which does indeed include a LIST command. My config file includes "PassivePorts 20001-26999", which are the port forwards I set up for the ftp server, and "Port 8085", which is also forwarded to the same machine. I also have a MasqueradeAddress set up to prevent it from reporting its internal IP, which was an earlier issue I had. I think what I'm asking is, is there another setting someplace I have to change to get this setup to work?

  Read the article

• Replicate between mysql 5.0.xx community and enterprise edition over ssh

  - by Arlukin

  I'm trying to setup a mysql replication over an SSH tunnel. The odd thing about this setup is that I have one master with mysql 5.0.60sp1-enterprise-gpl-log and one slave with mysql 5.0.67-community-log. Could it be so that it's not possible to replicate between community and enterprise edition? As you can see in my log below, it's possible to login on the remote server with the mysql client. But the replication get "Can't connect to MySQL server on '127.0.0.1' (13)" Is it any log file I have forgotten to look in, to get more info? [root@mysql1-av ~]# mysql -uroot -p Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 73 Server version: 5.0.67-community-log MySQL Community Edition (GPL) Type 'help;' or '\h' for help. Type '\c' to clear the buffer. The version of the slave mysql [root@mysql1-av ~]# autossh -f -M 20001 -L 3307:10.200.200.200:3306 [email protected] -N [root@mysql1-av ~]# mysql -h127.0.0.1 --port 3307 -uroot -p Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 5189 Server version: 5.0.60sp1-enterprise-gpl-log MySQL Enterprise Server (GPL) Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> Aborted Login to the master mysql with the mysql client over the ssh tunnel. [root@mysql1-av ~]# mysql -uroot -p Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 75 Server version: 5.0.67-community-log MySQL Community Edition (GPL) Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> change master to master_host='127.0.0.1', MASTER_PORT=3307, master_user='xxxx', master_password='xxxx', master_log_file='bin.000001'; Query OK, 0 rows affected (0.00 sec) mysql> start slave; Query OK, 0 rows affected (0.00 sec) mysql> show slave status \G *************************** 1. row *************************** Slave_IO_State: Connecting to master Master_Host: 127.0.0.1 Master_User: replNSG Master_Port: 3307 Connect_Retry: 60 Master_Log_File: bin.000001 Read_Master_Log_Pos: 4 Relay_Log_File: relay.000001 Relay_Log_Pos: 98 Relay_Master_Log_File: bin.000001 Slave_IO_Running: No Slave_SQL_Running: Yes Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 0 Last_Error: Skip_Counter: 0 Exec_Master_Log_Pos: 4 Relay_Log_Space: 98 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: NULL 1 row in set (0.00 sec) Start the replication, but it breaks on IO. [root@mysql1-av ~]# tail /var/log/mysqld.log 120921 22:17:59 [Note] Slave I/O thread killed while connecting to master 120921 22:17:59 [Note] Slave I/O thread exiting, read up to log 'bin.000001', position 4 120921 22:17:59 [Note] Error reading relay log event: slave SQL thread was killed 120921 22:29:36 [Note] Slave SQL thread initialized, starting replication in log 'bin.000001' at position 4, relay log '/var/lib/mysql/relay.000001' position: 4 120921 22:29:36 [ERROR] Slave I/O thread: error connecting to master '[email protected]:3307': Error: 'Can't connect to MySQL server on '127.0.0.1' (13)' errno: 2003 retry-time: 60 retries: 86400 Because it can't connect to the master server.

  Read the article

• set proxy in apache for XMPP chat

  - by Hunt

  I want to setup a proxy settings in Apache to use Facebook XMPP Chat So far I have setup ejabber server and I am able to access xmpp service using http://mydomain.com:5280/xmpp-http-bind I am able to create Jabber Account too. Now as I want to integrate Facebook XMPP chat , I want my server to sit in between client and chat.facebook.com because I want to implement Facebook chat and custom chat too. So I have read this article and come to know that I need to serve BOSH Service as a proxy in apache to access Facebook Chat service. So I don't know how to set up a proxy in a apache httpd.conf as I have tried following <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /xmpp-httpbind http://www.mydomain.com:5280/xmpp-http-bind ProxyPassReverse /xmpp-httpbind http://www.mydomain.com:5280/xmpp-http-bind But whenever I request http://www.mydomain.com:5280/xmpp-http-bind from strophe.js I am getting following response from server <body type='terminate' condition='internal-server-error' xmlns='http://jabber.org/protocol/httpbind'> BOSH module not started </body> and server log says following E(<0.567.0:ejabberd_http_bind:1239) : You are trying to use BOSH (HTTP Bind) in host "chat.facebook.com", but the module mod_http_bind is not started in that host. Configure your BOSH client to connect to the correct host, or add your desired host to the configuration, or check your 'modules' section in your ejabberd configuration file. here is my existing settings of ejabberd.cfg , but still no luck {5280, ejabberd_http, [ {access,all}, {request_handlers, [ {["pub", "archive"], mod_http_fileserver}, {["xmpp-http-bind"], mod_http_bind} ]}, captcha, http_bind, http_poll, register, web_admin ]} ]}. in a module section {mod_http_bind, [{max_inactivity, 120}]}, and whenever i fire http://www.mydomain.com:5280/xmpp-http-bind url independently am getting following message ejabberd mod_http_bind An implementation of XMPP over BOSH (XEP-0206) This web page is only informative. To use HTTP-Bind you need a Jabber/XMPP client that supports it. I have added chat.facebook.com in a list of host in ejabber.cfg as follows {hosts, ["localhost","mydomain.com","chat.facebook.com"]} and now i am getting following response <body xmlns='http://jabber.org/protocol/httpbind' sid='710da2568460512eeb546545a65980c2704d9a27' wait='300' requests='2' inactivity='120' maxpause='120' polling='2' ver='1.8' from='chat.facebook.com' secure='true' authid='1917430584' xmlns:xmpp='urn:xmpp:xbosh' xmlns:stream='http://etherx.jabber.org/streams' xmpp:version='1.0'> <stream:features xmlns:stream='http://etherx.jabber.org/streams'> <mechanisms xmlns='urn:ietf:params:xml:ns:xmpp-sasl'> <mechanism>DIGEST-MD5</mechanism> <mechanism>PLAIN</mechanism> </mechanisms> <c xmlns='http://jabber.org/protocol/caps' hash='sha-1' node='http://www.process-one.net/en/ejabberd/' ver='yy7di5kE0syuCXOQTXNBTclpNTo='/> <register xmlns='http://jabber.org/features/iq-register'/> </stream:features> </body> if i use valid BOSH service created my jack moffit http://bosh.metajack.im:5280/xmpp-httpbind then i am getting following valid XML from facebook , but from my server i am not getting this <body xmlns='http://jabber.org/protocol/httpbind' inactivity='60' secure='true' authid='B8732AA1' content='text/xml; charset=utf-8' window='3' polling='15' sid='928073b02da55d34eb3c3464b4a40a37' requests='2' wait='300'> <stream:features xmlns:stream='http://etherx.jabber.org/streams' xmlns='jabber:client'> <mechanisms xmlns='urn:ietf:params:xml:ns:xmpp-sasl'> <mechanism>X-FACEBOOK-PLATFORM</mechanism> <mechanism>DIGEST-MD5</mechanism> </mechanisms> </stream:features> </body> Can anyone please help me to resolve the issue

  Read the article

• Weird Network Behavior of Home Router

  - by Stilgar

  First of all I would like to apologize because what you are going to read will be long and confusing but I am fighting this issue for 3 days now and am out of ideas. At home I have the following setup 50Mbps Internet connects into a home router A 2 desktop computers connect to router A via standard FTP LAN cables including one where the cable is ~20m long. a second router B connects to router A via standard FTP LAN cable X (~20m long). several devices connect to the wireless network of router B and there are a couple of desktop computers connected to it through FTP LAN cables. For some reason computers connected to router B when it is connected via cable X have very slow Internet connection. It is like 5 times slower than what is expected. This is the actual problem I am trying to solve. Interesting facts If a computer is connected to cable X directly instead of through router B the Internet speed is just fine (up to the 50Mbps I get from the ISP). Tested with two computers. I have tried replacing router B with another router C and the problem persists. If I connect router B via another cable to the same ports with the same settings everything seems to work fine and computers connected to router B have quite fast Internet I have tested mainly via Speedtest.net but I have also achieved similar speeds when downloading a file The upload speed is quite higher than the download speed in all cases. Note that my ISP usually has higher upload speed (unless it manages to hit the 50Mbps cap) It seems like the speed when connecting through router B with cable X is reduced 4-5 times no matter what the original speed is. For example via router B I get 10Mbps speed to local servers where I get 50Mbps when connected on router A. If I use a distant server where the ISP is only able to provide 25Mbps I get 4-5Mbps on router B. WiFi is slower than LAN on both routers (which is normal) but the reduced speed is reduced proportionally for WiFi. In addition the upload speed is normally higher from the ISP and it is also reduced proportionally. I have tried two different network configurations. One where I have NAT behind NAT where router B connects to router A via the WAN port and has its own DHCP. Second where router B connects to router A via standard LAN port and has DHCP disabled. In this configuration router B serves as a switch and the Network Gateway for computers connected to router B is the internal IP address of router A. Both configurations work just fine but both manifest the reduced speed issue. pings seem to work just fine As far as I can tell none of the cables is crossed The RJ45 setup for cable X orange orange-white brown brow-white blue blue-white green green-white This is a big problem for me since cable X passes through walls and floors and is very hard to replace. I also may have gotten some of the facts wrong because I am almost going crazy with this issue and testing includes going several floors up and down the staircase. One hypothesis I came up with is that the cable is defective in such a way that the voltage from the router affects its performance. When it is connected to a computer it performs just fine but the router has less power. Related hypothesis includes the cable being affected by electricity cables in the walls when the voltage is low. (I know nothing about electricity) So any ideas what to do, what to test or what the issue may be?

  Read the article

• Consistent PHP _SERVER variables between Apache and nginx?

  - by Alix Axel

  I'm not sure if this should be asked here or on ServerFault, but here it goes... I am trying to get started on nginx with PHP-FPM, but I noticed that the server block setup I currently have (gathered from several guides including the nginx Pitfalls wiki page) produces $_SERVER variables that are different from what I'm used to seeing in Apache setups. After spending the last evening trying to "fix" this, I decided to install Apache on my local computer and gather the variables that I'm interested in under different conditions so that I could try and mimic them on nginx. The Apache setup I've on my computer has only one mod_rewrite rule: RewriteEngine On RewriteCond %{SCRIPT_FILENAME} !-f RewriteCond %{SCRIPT_FILENAME} !-d RewriteRule ^(.*)$ /index.php/$1 [L] And these are the values I get for different request URIs (left is Apache, right is nginx): localhost/ - http://www.mergely.com/GnzBHRV1/ localhost/foo/bar/baz/?foo=bar - http://www.mergely.com/VwsT8oTf/ localhost/index.php/foo/bar/baz/?foo=bar - http://www.mergely.com/VGEFehfT/ What configuration directives would allow me to get similar values on requests handled by nginx? My current configuration in nginx is: server { listen 80; listen 443 ssl; server_name default; ssl_certificate /etc/nginx/certificates/dummy.crt; ssl_certificate_key /etc/nginx/certificates/dummy.key; root /var/www/default/html; index index.php index.html; autoindex on; location / { try_files $uri $uri/ /index.php; } location ~ /(?:favicon[.]ico|robots[.]txt)$ { log_not_found off; } location ~* [.]php { #try_files $uri =404; include fastcgi_params; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; fastcgi_split_path_info ^(.+[.]php)(/.+)$; } location ~* [.]ht { deny all; } } And my fastcgi_params file looks like this: fastcgi_param PATH_INFO $fastcgi_path_info; fastcgi_param PATH_TRANSLATED $document_root$fastcgi_path_info; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; fastcgi_param HTTPS $https; I know that the try_files $uri =404; directive is commented and that it is a security vulnerability but, if I uncomment it, the third request (localhost/index.php/foo/bar/baz/?foo=bar) will return a 404. It's also worth noting that my PHP cgi.fix_pathinfo in On (contrary to what some of the guides recommend), if I try to set it to Off, I'm presented with a "Access denied." message on every PHP request. I'm running PHP 5.4.8 and nginx/1.1.19. I don't know what else to try... Help?

  Read the article

• Mac OS X 10.8 VPN Server: Bypass VPN for LAN traffic (routing LAN traffic to secondary connection)

  - by Dan Robson

  I have somewhat of an odd setup for a VPN server with OS X Mountain Lion. It's essentially being used as a bridge to bypass my company's firewall to our extranet connection - certain things our team needs to do require unfettered access to the outside, and changing IT policies to allow traffic through the main firewall is just not an option. The extranet connection is provided through a Wireless-N router (let's call it Wi-Fi X). My Mac Mini server is configured with the connection to this router as the primary connection, thus unfettered access to the internet via the router. Connections to this device on the immediate subnet are possible through the LAN port, but outside the subnet things are less reliable. I was able to configure the VPN server to provide IP addresses to clients in the 192.168.11.150-192.168.11.200 range using both PPTP and L2TP, and I'm able to connect to the extranet through the VPN using the standard Mac OS X VPN client in System Preferences, however unsurprisingly, a local address (let's call it internal.company.com) returns nothing. I tried to bypass the limitation of the VPN Server by setting up Routes in the VPN settings. Our company uses 13.x.x.x for all internal traffic, instead of 10.x.x.x, so the routing table looked something like this: IP Address ---------- Subnet Mask ---------- Configuration 0.0.0.0 248.0.0.0 Private 8.0.0.0 252.0.0.0 Private 12.0.0.0 255.0.0.0 Private 13.0.0.0 255.0.0.0 Public 14.0.0.0 254.0.0.0 Private 16.0.0.0 240.0.0.0 Private 32.0.0.0 224.0.0.0 Private 64.0.0.0 192.0.0.0 Private 128.0.0.0 128.0.0.0 Private I was under the impression that if nothing was entered here, all traffic was routed through the VPN. With something entered, only traffic specifically marked to go through the VPN would go through the VPN, and all other traffic would be up to the client to access using its own default connection. This is why I had to specifically mark every subnet except 13.x.x.x as Private. My suspicion is that since I can't reach the VPN server from outside the local subnet, it's not making a connection to the main DNS server and thus can't be reached on the larger network. I'm thinking that entering hostnames like internal.company.com aren't kicked back to the client to resolve, because the server has no idea that the IP address falls in the public range, since I suspect (probably should ping test it but don't have access to it right now) that it can't reach the DNS server to find out anything about that hostname. It seems to me that all my options for resolving this all boil down to the same type of solution: Figure out how to reach the DNS with the secondary connection on the server. I'm thinking that if I'm able to do [something] to get my server to recognize that it should also check my local gateway (let's say Server IP == 13.100.100.50 and Gateway IP == 13.100.100.1). From there Gateway IP can tell me to go find DNS Server at 13.1.1.1 and give me information about my internal network. I'm very confused about this path -- really not sure if I'm even making sense. I thought about trying to do this client side, but that doesn't make sense either, since that would add time to each and every client side setup. Plus, it just seems more logical to solve it on the server - I could either get rid of my routing table altogether or keep it - I think the only difference would be that internal traffic would also go through the server - probably an unnecessary burden on it. Any help out there? Or am I in over my head? Forward proxy or transparent proxy is also an option for me, although I have no idea how to set either of those up. (I know, Google is my friend.)

  Read the article

• Openldap/Sasl/GSSAPI on Debian: Key table entry not found

  - by badbishop

  The goal: to make an OpenLDAP server to authenticate using Kerberos V via GSSAPI Setup: several virtual machines running on freshly installed/updated Debian Squeeze A master KDC server kdc.example.com A LDAP server, running OpenLDAP ldap.example.com The problem: tom@ldap:~$ ldapsearch -b 'dc=example,dc=com' SASL/GSSAPI authentication started ldap_sasl_interactive_bind_s: Other (e.g., implementation specific) error (80) additional info: SASL(-1): generic failure: GSSAPI Error: Unspecified GSS failure. Minor code may provide more information (Key table entry not found) One might suggest to add that bloody keytab entry, but here's the real problem: ktutil: rkt /etc/ldap/ldap.keytab ktutil: list slot KVNO Principal ---- ---- --------------------------------------------------------------------- 1 2 ldap/[email protected] 2 2 ldap/[email protected] 3 2 ldap/[email protected] 4 2 ldap/[email protected] So, the entry as suggested by the OpenLDAP manual is there allright. Deleting and re-creating both service principal and the keytab on ldap.example.com didn't help, I get the same error. And before I make the keytab file readable by openldap, I get "Permission denied" error instead of the one in the subject. Which implies, that the right keytab file is being accessed, as set in /etc/default/slapd. I have my doubts about the following part of slapd config: root@ldap:~# cat /etc/ldap/slapd.d/cn\=config.ldif | grep -v "^#" dn: cn=config objectClass: olcGlobal cn: config olcArgsFile: /var/run/slapd/slapd.args olcLogLevel: 256 olcPidFile: /var/run/slapd/slapd.pid olcToolThreads: 1 structuralObjectClass: olcGlobal entryUUID: d6737f5c-d321-1030-9dbe-27d2a7751e11 olcSaslHost: kdc.example.com olcSaslRealm: EXAMPLE.COM olcSaslSecProps: noplain,noactive,noanonymous,minssf=56 olcAuthzRegexp: {0}"uid=([^/]*),cn=EXAMPLE.COM,cn=GSSAPI,cn=auth" "uid=$1,ou=People,dc=example,dc=com" olcAuthzRegexp: {1}"uid=host/([^/]*).example.com,cn=example.com,cn=gssapi,cn=auth" "cn=$1,ou=hosts,dc=example,dc=com" A HOWTO at https://help.ubuntu.com/community/OpenLDAPServer#Kerberos_Authentication mentiones vaguely: Also, it is frequently necessary to map the Distinguished Name (DN) of an authorized Kerberos client to an existing entry in the DIT. I fail to understand where in the tree this should be defined, what schema should be used, etc. After hours of googling, it's official: I'm stuck! Please, help. Other things checked: Kerberos as such works fine (I can ssh without using a password to any machine in this setup). That means there should be no DNS-related problems. ldapsearch -b 'dc=example,dc=com' -x works OK. SASL/GSSAPI has been tested using sasl-sample-server -m GSSAPI -s ldap and sasl-sample-client -s ldap -n ldap.example.com -u tom without errors: root@ldap:~# sasl-sample-server -m GSSAPI -s ldap Forcing use of mechanism GSSAPI Sending list of 1 mechanism(s) S: R1NTQVBJ Waiting for client mechanism... C: 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 'GSSAPI' Sending response... S: YIGZBgkqhkiG9xIBAgICAG+BiTCBhqADAgEFoQMCAQ+iejB4oAMCARKicQRvkxggi9pW+yJ1ExbTwLDclqw/VQ98aPq8mt39hkO6PPfcO2cB+t6vJ01xRKBrT9D2qF2XK0SWD4PQNb5UFbH4RM/bKAxDuCfZ1MHKgIWTLu4bK7VGZTbYydcckU2d910jIdvkkHhaRqUEM4cqp/cR Waiting for client reply... C: got '' Sending response... S: BQQF/wAMAAAAAAAAMBOWqQcACAAlCodrXW66ZObsEd4= Waiting for client reply... C: BQQE/wAMAAAAAAAAFUYbXQQACAB0b20VynB4uGH/iIzoRhw=got '?' Negotiation complete Username: tom Realm: (NULL) SSF: 56 sending encrypted message 'srv message 1' S: AAAASgUEB/8AAAAAAAAAADATlqrqrBW0NRfPMXMdMz+zqY32YakrHqFps3o/vO6yDeyPSaSqprrhI+t7owk7iOsbrZ/idJRxCBm8Wazx Waiting for encrypted message... C: AAAATQUEBv8AAAAAAAAAABVGG17WC1+/kIV9xTMUdq6Y4qYmmTahHVCjidgGchTOOOrBLEwA9IqiTCdRFPVbK1EgJ34P/vxMQpV1v4WZpcztgot '' recieved decoded message 'client message 1' root@ldap:~# sasl-sample-client -s ldap -n ldap.example.com -u tom service=ldap Waiting for mechanism list from server... S: R1NTQVBJrecieved 6 byte message Choosing best mechanism from: GSSAPI returning OK: tom Using mechanism GSSAPI Preparing initial. Sending initial response... C: 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 Waiting for server reply... S: YIGZBgkqhkiG9xIBAgICAG+BiTCBhqADAgEFoQMCAQ+iejB4oAMCARKicQRvkxggi9pW+yJ1ExbTwLDclqw/VQ98aPq8mt39hkO6PPfcO2cB+t6vJ01xRKBrT9D2qF2XK0SWD4PQNb5UFbH4RM/bKAxDuCfZ1MHKgIWTLu4bK7VGZTbYydcckU2d910jIdvkkHhaRqUEM4cqp/cRrecieved 156 byte message C: Waiting for server reply... S: BQQF/wAMAAAAAAAAMBOWqQcACAAlCodrXW66ZObsEd4=recieved 32 byte message Sending response... C: BQQE/wAMAAAAAAAAFUYbXQQACAB0b20VynB4uGH/iIzoRhw= Negotiation complete Username: tom SSF: 56 Waiting for encoded message... S: AAAASgUEB/8AAAAAAAAAADATlqrqrBW0NRfPMXMdMz+zqY32YakrHqFps3o/vO6yDeyPSaSqprrhI+t7owk7iOsbrZ/idJRxCBm8Wazxrecieved 78 byte message recieved decoded message 'srv message 1' sending encrypted message 'client message 1' C: AAAATQUEBv8AAAAAAAAAABVGG17WC1+/kIV9xTMUdq6Y4qYmmTahHVCjidgGchTOOOrBLEwA9IqiTCdRFPVbK1EgJ34P/vxMQpV1v4WZpczt

  Read the article

< Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >