Search Results

Search found 8441 results on 338 pages for 'live wallpaper'.

Page 307/338 | < Previous Page | 303 304 305 306 307 308 309 310 311 312 313 314  | Next Page >

  • Setting up a home server - what to use? (ZFS vs btrfs, BSD vs Linux, misc other requirements)

    - by monch1962
    I need to get all our home content off individual machines and onto a central server. What I'd like to have is the metaphorical "server under the stairs". Stuff we need: expandable storage. I want to be able to add extra disc as we go along, with minimal maintenance required. Currently we've got about 3Tb of files we need to host, and that's likely to grow by another Tb every 6-12 months based on recent history. I need to be able to add additional disc with minimal pain needs to store all the media (i.e. photos, video, music) we have, and run services to serve the various devices we have in the house to playback (e.g. DAAP so we can play stuff through iTunes, ccxstream so we can play stuff over XBMC). DAAP and ccxstream are needed now, but we also need to support new standards as they emerge (so a closed-box solution isn't going to work) RAID 5, or something broadly equivalent (e.g. RAID-Z) BitTorrent client ssh, NFS, Samba access snapshot capability (as in ZFS), so we can snapshot individual file systems regularly and rollback when my kids delete their school assignments the day before they're due... ability to recover quickly from power outages (it's not unusual for us to have power outages that last longer than our UPS' batteries) FOSS software a modern distributed version control system running on the box, such as Mercurial Stuff I'd like to have on the server, but can live without: PVR capability, so I could record TV to the box Web server. We currently run a small Web server on a very old box, and I'd ideally like to turn the old box off and move the content to the new server just to save some electricity Nagios + mrtg I've been looking at using a EEE Box as the server, primarily because I can get them cheap and they don't consume much power. The choice of OS and file system is more difficult, from what I've found: I've got most experience with various Linux distros, but am happy to use another Unix FreeBSD and OpenSolaris seem to be the best choices for hosting ZFS OpenSolaris' hardware support is nowhere near as good as e.g. Ubuntu btrfs, while looking very good, doesn't seem ready for prime-time yet ZFS doesn't let you (easily?) add new discs to a RAID5 or RAID-Z reading around, it seems that ZFS is a bit short of tools for recovering lost data At the moment, I'm leaning towards running FreeNAS+ZFS, but I'm concerned about the requirement to be able to add new disc on a fairly regular basis to an existing RAID-Z. Can anyone provide some recommendations, or share experiences? Thanks in advance

    Read the article

  • Setting up a home server - what to use? (ZFS vs btrfs, BSD vs Linux, misc other requirements)

    - by monch1962
    I need to get all our home content off individual machines and onto a central server. What I'd like to have is the metaphorical "server under the stairs". Stuff we need: expandable storage. I want to be able to add extra disc as we go along, with minimal maintenance required. Currently we've got about 3Tb of files we need to host, and that's likely to grow by another Tb every 6-12 months based on recent history. I need to be able to add additional disc with minimal pain needs to store all the media (i.e. photos, video, music) we have, and run services to serve the various devices we have in the house to playback (e.g. DAAP so we can play stuff through iTunes, ccxstream so we can play stuff over XBMC). DAAP and ccxstream are needed now, but we also need to support new standards as they emerge (so a closed-box solution isn't going to work) RAID 5, or something broadly equivalent (e.g. RAID-Z) BitTorrent client ssh, NFS, Samba access snapshot capability (as in ZFS), so we can snapshot individual file systems regularly and rollback when my kids delete their school assignments the day before they're due... ability to recover quickly from power outages (it's not unusual for us to have power outages that last longer than our UPS' batteries) FOSS software a modern distributed version control system running on the box, such as Mercurial Stuff I'd like to have on the server, but can live without: PVR capability, so I could record TV to the box Web server. We currently run a small Web server on a very old box, and I'd ideally like to turn the old box off and move the content to the new server just to save some electricity Nagios + mrtg I've been looking at using a EEE Box as the server, primarily because I can get them cheap and they don't consume much power. The choice of OS and file system is more difficult, from what I've found: I've got most experience with various Linux distros, but am happy to use another Unix FreeBSD and OpenSolaris seem to be the best choices for hosting ZFS OpenSolaris' hardware support is nowhere near as good as e.g. Ubuntu btrfs, while looking very good, doesn't seem ready for prime-time yet ZFS doesn't let you (easily?) add new discs to a RAID5 or RAID-Z reading around, it seems that ZFS is a bit short of tools for recovering lost data At the moment, I'm leaning towards running FreeNAS+ZFS, but I'm concerned about the requirement to be able to add new disc on a fairly regular basis to an existing RAID-Z. Can anyone provide some recommendations, or share experiences? Thanks in advance

    Read the article

  • Setting up a home server - what to use? (ZFS vs btrfs, BSD vs Linux, misc other requirements)

    - by monch1962
    I need to get all our home content off individual machines and onto a central server. What I'd like to have is the metaphorical "server under the stairs". Stuff we need: expandable storage. I want to be able to add extra disc as we go along, with minimal maintenance required. Currently we've got about 3Tb of files we need to host, and that's likely to grow by another Tb every 6-12 months based on recent history. I need to be able to add additional disc with minimal pain needs to store all the media (i.e. photos, video, music) we have, and run services to serve the various devices we have in the house to playback (e.g. DAAP so we can play stuff through iTunes, ccxstream so we can play stuff over XBMC). DAAP and ccxstream are needed now, but we also need to support new standards as they emerge (so a closed-box solution isn't going to work) RAID 5, or something broadly equivalent (e.g. RAID-Z) BitTorrent client ssh, NFS, Samba access snapshot capability (as in ZFS), so we can snapshot individual file systems regularly and rollback when my kids delete their school assignments the day before they're due... ability to recover quickly from power outages (it's not unusual for us to have power outages that last longer than our UPS' batteries) FOSS software a modern distributed version control system running on the box, such as Mercurial Stuff I'd like to have on the server, but can live without: PVR capability, so I could record TV to the box Web server. We currently run a small Web server on a very old box, and I'd ideally like to turn the old box off and move the content to the new server just to save some electricity Nagios + mrtg I've been looking at using a EEE Box as the server, primarily because I can get them cheap and they don't consume much power. The choice of OS and file system is more difficult, from what I've found: I've got most experience with various Linux distros, but am happy to use another Unix FreeBSD and OpenSolaris seem to be the best choices for hosting ZFS OpenSolaris' hardware support is nowhere near as good as e.g. Ubuntu btrfs, while looking very good, doesn't seem ready for prime-time yet ZFS doesn't let you (easily?) add new discs to a RAID5 or RAID-Z reading around, it seems that ZFS is a bit short of tools for recovering lost data At the moment, I'm leaning towards running FreeNAS+ZFS, but I'm concerned about the requirement to be able to add new disc on a fairly regular basis to an existing RAID-Z. Can anyone provide some recommendations, or share experiences? Thanks in advance

    Read the article

  • APC ups es 700 randomly overload

    - by Matteo Mosca
    First of all, I live in Italy, Europe, so keep this in mind for Volt/Watt considerations. Standard voltage in Italian apartments is 220V. In my living room I have 2 APC ups, one being an ES-550 and the other an ES-700 They each have 4 slots for surge protection only, and 4 slots for surge protection + battery backup. Just to give all the information, they both got their battery replaced less than one month ago. The ES-550 works fine, without any problem. On the battery I have connected: Pc Monitor Sony Bravia 46'' 4th slot is empty The ES-700 has the following on battery: Xbox 360 Ps3 (standby when not used) Wii (standby when not used) Netgear 8 port switch (always on) Here's what happens: the ES-700, randomly, but mostly at night when I'm sleeping, goes like "overload", with the constant beep. If I try to shut it off keeping the power button pressed, nothing happens. The only thing that works is unplugging random stuff (sometimes unplugging 1 console works, other times I have to unplug all 4 devices). Every time this happens the problem is "real", meaning the 4 devices become unpowered, so it's not just an "alarm no working properly" problem. While I'm sleeping, of course, the power usage is what described on the list, 2 devices on standy, 1 off and 1 on. Today it happened again while I was playing with my Ps3. I unplugged it, problem went away. I plugged it again, and it kept working fine. I just can't figure out what's the problem. The only additional info I can provide is that this behaviour started after a big power outage last december 26 (a blackout that lasted almost all day) but the "surge protection" part of those UPS should be there for those problems, to leverage peaks when power goes away or gets restored. Another funny thing is, althought it might not be related, for a couple of days after that event the Wii was unable to power on, I thought its power transformer was broken, but then it suddenly started working again. I can be sure it's not the Wii overloading the UPS because the overload happens even if I leave the Wii unplugged. Any suggestion is really appreciated, and I can provide any additional info, if needed, that didn't come to mind right now. Thanks.

    Read the article

  • PDF Corruption When Sending with Microsoft Products

    - by Winner
    I have the same PDF corruption problem in two different offices that I am the tech support for. Office 1: Started in the middle of December. PDF received from outside the office and is viewable with no problems. I have no control over how it is created. If it is forwarded to anyone else, the PDF is corrupted. I have forwarded it to multiple people in the office. I have tried viewing with Reader 8, 9, Sumatra and Fox IT. I have tried forwarding to Gmail and their viewer says it is corrupted. If I save the PDF and create a new email, it will be corrupted when sent using Outlook 2003, Outlook 2007, Microsoft Live Mail and Outlook Express. If I create the email using Thunderbird 3, Gmail or the webclient Iclient for IPSwitch IMail it will not be corrupted. I have confirmed the same results when using our IMail SMTP and also Using Gmail as the SMTP server. To be clear, if I created in Thunderbird, Gmail or Iclient and received on any of the MS products, it will be viewable. This office receives PDFs daily from multiple sources. There is only a small subset that are having this problem. So far they problem PDFs are from two different companies they deal with, but not all of the PDFs are bad. Office 2: PDFs are created by a management system. I'm not sure what engine is used to create them. Same exact same issues. At both offices, I noticed that the file size is wrong. One small PDF the proper file size is 12kb for the PDF when it's viewable, when it shows up corrupted it is only 8kb. We handle the email for both offices. Both are POP servers, not Exchange. IMail was updated after these issues start. I have tried different SMTP servers and it still seems to happen only when using Microsoft products to send. Anyone else having problems with PDFs getting corrupted? Any ideas how to find out a resolution?

    Read the article

  • Baseline / Benchmark Physical and virtual server performance

    - by EyeonTech
    I am setting up a new server and there are some options. I want to perform some benchmarks and I need your help in determining the best tools and if possible run pre-configured benchmarks designed for SQL servers on Windows Server 2008/2012. Step 1. Run a performance monitor on the current Live SQL server (Windows Server 2008 Virtual machine running on ESXi. New server Hardware rundown: Intel® Server System R1304BTLSHBN - 1U Rack, LGA1155 http://ark.intel.com/products/53559/Intel-Server-System-R1304BTLSHBN Intel Xeon E3-1270V2 2x Intel SSD 330 Series 240GB 2.5in SATA 6Gb/s 25nm 1x WD 2TB WD2002FAEX 2TB 64M SATA3 CAVIAR BLACK 4x 8GB 1333MHz DDR3 ECC CL9 DIMM There are several options for configurations and I want to benchmark some of them and share the results. Option 1. Configure 2x SSDs at RAID 0. Install Windows Server 2008 directly to the 2TB WD Caviar HDD. Store Database files on the RAID 0 Volume. Benchmark the OS direct on the hardware as an SQL Server. Store SQL Backup databases on the 2TB WD Caviar HDD. Option 2. Configure 2x SSDs at RAID 0. Install Windows Server 2012 directly to the 2TB WD Caviar HDD. Install Hyper-V. Install the SQL Server (Server 2008) as a virtual machine. Store the Virtual Hard Disks on the SSDs. Option 3. Configure 2x SSDs at RAID 0. Install VMWare ESXi on a partition of the 2TB WD Caviar HDD. Install the SQL Server (Server 2008) as a virtual machine. Store the Virtual Hard Disks on the SSDs. I have a few tools in mind from http://technet.microsoft.com/en-us/library/cc768530(v=bts.10).aspx. Any tools with pre-configured test would be fantastic. Specifically if there are pre-configured perfmon sets avaliable. Any opinions on the setup to gain the best results is welcome. Thanks in advance.

    Read the article

  • ISC DHCP - Force clients to get a new IP address, instead of the being re-issued their previous lease's IP

    - by kce
    We are in the middle of a migration of our DHCP and DNS services from a Debian-based server to a Windows Server 2008 R2 implementation. The Debian server is running isc-dhcpd-V3.1.1. All of workstations are configured to have fixed-addresses between .3 and .40 (the motivation behind that choice is mostly management/political much like here). DHCP leases are given out in the range of .100 to .175. Statically configured servers live in the .200 block and above (which is mostly empty). When we move to the Windows platform, management/political considerations require me to move the IP ranges around again. We would like to keep .1 - .10 reserved for network appliances, switches, and other infrastructure. .200 will remain designated for servers. The addressing space in between should be available to clients and IPs should be dynamically allocated (Edit: instead of automatic as originally mentioned) by the server. My Address Pool on the Windows Server looks like this: 192.168.0.1 192.168.0.254 (Address range for distribution) 192.168.0.1 192.168.0.10 (IP addresses excluded from distribution) 192.168.0.200 192.168.0.254 (IP addresses excluded from distribution) Currently, we have all of our clients still on the .3 - .40 range, and a few machines still active in the .100 - .175 (although there are lots devices that are powered off that still have expired leases with IPs from that range). Since the lease "database" isn't shared between the old and new DHCP server how can I prevent clients from receiving a lease with an IP address that is currently being held by client with a non-expired lease from the old DHCP server? If I just expand the range on the Debian DHCP server to be 192.168.0.10 - 192.168.0.199 is there a way to force clients to not re-use their old IP address when they send their DHCPDISCOVER? Can I make the Windows DHCP server be authoritiative like the ISC implementation? The dhcpd.conf from the Debian server: ddns-update-style none; authoritative; default-lease-time 43200; #12 hours max-lease-time 86400; #24 hours subnet 192.168.0.0 netmask 255.255.255.0 { option routers 192.168.0.1; option subnet-mask 255.255.255.0; option broadcast-address 192.168.0.255; range 192.168.0.100 192.168.0.175; } host workstation-1 { hardware ethernet 00:11:22:33:44:55; fixed-address 192.168.0.3; } ... and so on until 192.168.0.40

    Read the article

  • No login prompt displayed after updating Ubuntu 10.04, broken gdm

    - by cliff
    So here's what happens: I updated my system the other day, was prompted for a reboot for the update to complete but was in the middle of working so I delayed it until after I was done. I reboot and it's broken :(. It appears to boot normally, with the following exceptions: The purple Ubuntu load screen no longer displays (though it did for the first couple of times I tried to get in). I hear the login prompt sound, but no login prompt appears. Nor is it simply "invisible" - pressing enter, typing my password, and pressing enter again do nothing. Normally my Bluetooth mouse is functional at this point, but it is not. GRUB displays recovery options for my current kernel, and for an older one (2.6.32-24). Trying to boot into .32-24 gives me an error saying "udevadm can't do something while udev is not configured". So I try solutions listed here: http://superuser.com/questions/195786/ubuntu-update-went-wrong-pc-doesnt-boot-how-can-i-repair-it Nothing I tried seemed to work, and after further Googling my hunch is that it's a problem with gdm. Please correct me if I'm wrong, I don't know all that much about how Linux/Ubuntu systems work just yet. Things I'm able to do: Boot to a live CD Ctrl-Alt-F2 after that login sound plays brings me to a console login, which I can successfully do (it's how I tried the solutions above). This works only under the current kernel. A hack I'd be willing to explore is removing the login prompt from the console, but I'd prefer to "simply" fix what's wrong. Like that guy, I need to repair the system rather than reinstall. System: Dell Inspiron 1525 Core 2 Duo Proprietary Driver for Broadcom 43xx wireless Dual-boot with Windows 7 (which is how I'm posting this, unfortunately I only have this machine and any experimenting requires constant reboots into Windows/brokenbuntu) Last package installed was Moonlight, but it appeared to install properly. Kernel: 2.6.32-25 Edit: After working with Karl's suggestions, it seems that the problem is with gdm. Error exit status 245 when attempting to sudo apt-get install --reinstall gdm, also an error processing gdm when running sudo apt-get -f install. How do I reinstall or repair gdm so that I can get back into my machine?

    Read the article

  • Hanging page loads every n loads - SOLVED

    - by Christian
    Hi Guys I recently moved my site to a new server (Apache 2, PHP5, MySQL5). The site is an Invision based forum. Every few posts / topics it just hangs. The data has been written because if you stop and reload, the post / thread is there. I thought it was a write issue initially, but nope. So, the data is written but the page load never completes. It doesn't leave the page where the data has been input. Whats the best way to trouble shoot this issue? The only thing I have done recently is reduce my MySQL timeouts, but I can't see that being an issue as the values are still big enough and there are no mentions of timeouts in the MySQL log. (For the record there is nothing in PHP's error log either) Thanks in advance! EDIT: I checked my server-status. It all looked ok, but I have a suspicion I was hitting my ServerLimit, so I doubled that. Also enabled my Keepalives. Will keep an eye on it. EDIT 2: Its now been a few days and this is still occuring. I have more info though; Apache is throwing seg faults, but enabling core dumps does not produce them. I have tried disabling the modules in apache but it just stops things from working. I fear it may actually be DNS related. If I watch Live Headers in Firefox, absolutely nothing happens during this 'hanging' period. After that, the responses come back fairly promptly. UPDATE (05/04): I built the latest versions of Apache and PHP from source, no luck. I then removed those and used the remi repo to update all my packages to the latest stable. Segfaults seem to have stopped, but the hanging is continuing. ini's are at; www.skylinesaustralia.com/php.ini www.skylinesaustralia.com/my.cnf www.skylinesaustralia.com/httpd.conf UPDATE - SOLVED! - The issue was having a gigantic query cache size in MySQL. It was 2GB, changing it to 64M sorted it. Thanks for all the help everybody, much appreciated!!

    Read the article

  • kvm and qemu host: Is there a limit for max CPUs (Ubuntu 10.04)?

    - by Valentin
    Today we encountered a really strange behaviour on two identical kvm and qemu hosts. The host systems each have 4 x 10 Cores, which means that 40 physical cores are displayed as 80 within the operating system (Ubuntu Linux 10.04 64 Bit). We started a Windows 2003 32 Bit VM (1 CPU, 1 GB RAM, we changed those values multiple times) on one of the nodes and noticed that it took 15 minutes until the boot process began. During those 15 minutes, a black screen is shown and nothing happens. libvirt and the host system show that the qemu-kvm process for the guest is almost idling. stracing this process only shows some FUTEX entries, but nothing special. After those 15 minutes, the Windows VM suddenly starts booting and the Windows logo occurs. After a few seconds, the VM is ready to be used. The VM itself is very performant, so this is no performance issue. We tried to pin the CPUs with the virsh and taskset tools, but this only made things worse. When we boot the Windows VM with a Linux Live CD there is also a black screen for several minutes, but not as long as 15. When booting another VM on this host (Ubuntu 10.04) it also has the black screen problem, and also here the black screen is only shown for 2-3 minutes (instead of 15). So, summerinzing this: Each guest on each of those identical nodes suffers from idling a few minutes after being started. After a few minutes, the boot process suddenly starts. We have observed that the idling time happens right after the bios of the guest was initialized. One of our employees had the idea to limit the amount of CPUs with maxcpus=40 (because of 40 physical cores existing) within Grub (kernel parameter) and suddenly the "black-screen-idling"-behaviour disappeared. Searching the KVM and Qemu mailing lists, the internet, forums, serverfault and other various sites for known bugs etc. showed no useful results. Even asking in the dev IRC channels brought no new ideas. The people there recommend us to use CPU pinning, but as stated before it didn't help. My question is now: Is there a sort of limit of CPUs for a qemu or kvm host system? Browsing the source code of those two tools showed that KVM would send a warning if your host has more than 255 CPUs. But we are not even scratching on that limit. Some stuff about the host system: 3.0.0-20-server kvm 1:84+dfsg-0ubuntu16+0.14.0+noroms+0ubuntu4 kvm-pxe 5.4.4-7ubuntu2 qemu-kvm 0.14.0+noroms-0ubuntu4 qemu-common 0.14.0+noroms-0ubuntu4 libvirt 0.8.8-1ubuntu6 4 x Intel(R) Xeon(R) CPU E7-4870 @ 2.40GHz, 10 Cores

    Read the article

  • dd-wrt router firmware QoS troubleshooting

    - by Jeff Atwood
    I've been using the dd-wrt firmware on my router and I like it a lot! But -- I'm not sure the quality of service (QoS) is working on it. I have it set up as follows: http, port 80 -- Premium bittorrent, port 6969 -- Bulk https, port 443 -- Premium dns, port 53 -- Premium Per the QoS documentation, these levels are: bandwidth is allocated based on the following percentages of uplink and downlink values for each class: Exempt: 100mbps - ignores global limits. Premium: 75% - 100% Express: 15% - 100% Standard: 10% - 100% Bulk: 1.5% - 100% This doesn't entirely seem to work, though -- with busy torrents going I get major pauses in my web browsing which sucks! The QoS documentation gives some steps to check the QoS ... What you'll be interested to look at will be the first set of source and destination IP, including the port numbers. Next the presence of l7proto and the "mark" field. The entries indicate the current live connection QoS priority applied on them based on the "mark" field. The "mark" values correspond to the following Exempt: 100 Premium: 10 Express: 20 Standard: 30 Bulk: 40 (no QoS matched): 0 You may see "mark=0" for some l7proto service even though they are in configured in the list of QoS rules. This may mean that the layer 7 pattern matching system didn't match a new or changed header for that protocol. Custom service on port matches will usually take care of these. On port 6969 (bittorrent) I see a weird mixture of stuff with mark=0 and mark=40 like so cat /proc/net/ip_conntrack udp 17 105 src=98.162.182.42 dst=1.2.3.4 sport=64512 dport=6969 packets=3 bytes=290 src=10.0.0.2 dst=98.162.182.42 sport=6969 dport=64512 packets=4 bytes=202 [ASSURED] mark=0 secmark=0 use=1 tcp 6 117 TIME_WAIT src=98.248.173.174 dst=1.2.3.4 sport=51114 dport=6969 packets=12 bytes=704 src=10.0.0.2 dst=98.248.173.174 sport=6969 dport=51114 packets=10 bytes=440 [ASSURED] mark=40 secmark=0 use=1 tcp 6 598 ESTABLISHED src=165.132.128.201 dst=1.2.3.4 sport=57218 dport=6969 packets=8024 bytes=9919881 src=10.0.0.2 dst=165.132.128.201 sport=6969 dport=57218 packets=4211 bytes=239607 [ASSURED] mark=0 secmark=0 use=1 tcp 6 586 ESTABLISHED src=68.46.9.24 dst=1.2.3.4 sport=64688 dport=6969 packets=6 bytes=490 src=10.0.0.2 dst=68.46.9.24 sport=6969 dport=64688 packets=8 bytes=944 [ASSURED] mark=40 secmark=0 use=1 udp 17 45 src=222.254.228.38 dst=1.2.3.4 sport=25438 dport=6969 packets=5 bytes=454 src=10.0.0.2 dst=222.254.228.38 sport=6969 dport=25438 packets=3 bytes=154 [ASSURED] mark=0 secmark=0 use=1 ( full file visible at http://pastebin.com/AZE6EtWm ) I've been playing around with this log for a little while and I can't see any patterns! Why is some port 6969 bittorrent traffic tagged mark=0 (not matched) by dd-wrt's QoS while others are tagged mark=40 (Bulk) .. any ideas?

    Read the article

  • Unecrypted Image of Truecrypt-Encrypted System Partition

    - by Dexter
    The general tenor around the internet seems to be that you can't create images of system partitions that have been encrypted (with truecrypt) other than with dd or similar sector-by-sector copy tools. These files however are very impractical given their size (and are obviously incompressible) which makes keeping multiple states/backups of your system partition rather expensive (..especially considering current hdd prices). The problem is that backup tools (like Acronis True Image, Clonezilla, etc.) won't give you the option to create an image of (mounted/opened) Truecrypt partitions, or that there is no recovery environment for restoring the backup, that would allow to run truecrypt before doing any actual restoring. After some trial and error however, I believe I have found a very simple way. Since Truecrypt (running in Linux) creates a virtual block device, that it uses for mounting the unencrypted partitions into the file system, partclone can be used for creating/restoring images. What I did: boot up a linux live disk mount/open the drive/device/partition in truecrypt unmount the filesystem mount point again, like so: umount /media/truecryptX ("X" being the partition number assigend by truecrypt) use partclone (this is what clonezilla would do too, except that clonezilla only offers you to back up real drive partitions, not virtual block devices): partclone.ntfs -c -s /dev/mapper/truecryptX -o nameOfBackupFile for restoring steps 1-3 remain the same, and step 4 is partclone.ntfs -r -s nameOfBackupFile -o /dev/mapper/truecryptX A backup and test-restore of the system (with this method) seems to have worked fine (and the changed settings were reverted to the backup-state). The backup file is ~40 GB (and compressible down to <8GB with 7zip/LZMA2 on the "fast" setting). I can't quite believe that I'm the only one that wants to create images of encrypted drives, but doesn't want to waste 100GB on the backup of one single system state. So my question now is, given how simple this was, and that no one seems to mention anywhere that this is possible - did I miss something? or did I do something wrong? Is there any situation that I didn't think of where this method will fail? Obviously, the backup file needs to be stored in some other encrypted place in order to still remain confidential, since it is unencrypted. Also, in order to do a full "bare metal" restore, one would have to actually first (re-)install Windows, encrypt it, and only then restore the backup file. The funny thing however is that you won't need to backup any partition tables, etc. since the reinstall will effectively take care of that. Is there anything else? This is imho still a lot better than having sector-by-sector images..

    Read the article

  • DCHP and Router load testing

    - by John H
    I manage a campground wifi network with an average of 10 - 60 active users. I have encountered issues where the router starts acting flaky (failing to assign DHCP or failing to pass traffic) without any clear warning (low cpu utilization, etc). I upgraded the router a couple times and ended up with a Netgear ProSafe VPN router that seems to be handling the traffic. The interesting thing is that the Netgear has lower specs than the Buffalo router it replaced, indicating the issue is with the DD-WRT firmware. While I'll be pursuing this issue on the dd-wrt forums, I need a way to test routers. My vision is having 1-2 computers connected on the LAN side and 1-2 computers connected on the WAN side. I want the LAN computers to be generating various type of traffic and connections, as well as requesting DCHP addresses. A few notes: The wireless aspect should be a non-issue. Most clients would connect to a wireless bridge and come into the router through a network cable. I had a monitoring server with Nagios running check_dhcp against the router. This server was connected directly by a network cable, eliminating wifi bridges and other devices from the equation. This question is somewhat related, but not exactly: Load testing wireless LANs I am going to look at IxChariot. While I'd ideally like to use a 1 computer on each side running Linux and preferably free software, I can entertain running Windows, multiple computers, or non-free software. Total bandwidth doesn't seem to be the issue. I can transfer large files all day. Even on the busiest days, the users seemed to only pull ~5Mbps. There is very little "LAN to LAN traffic" and most of it might never have reached the main router. The issue I need to test for seems to be tied to active users, or more appropriately, active sessions. I know active users or active clients is a meaningless term from a router standpoint and wouldn't mind having more appropriate terms to use. Summary: I need a way to test a routers ability in handling traffic from a large number of clients. My current strategy is to purchase a router, deploy it, and see how it fails in the live environment.

    Read the article

  • Is DHCP lease expriring years from now okay?

    - by sharptooth
    I'm reviewing Azure web role logs and there's output from ipconfig /all IPv4 Address. . . . . . . . . . . : 10.61.145.37(Preferred) . Subnet Mask . . . . . . . . . . . : 255.255.254.0. Lease Obtained. . . . . . . . . . : Monday, September 24, 2012 12:26:00 PM. Lease Expires . . . . . . . . . . : Thursday, October 31, 2148 6:55:12 PM. you see, the lease expires in year 2148 but my VM will likely not run for more than one month - when I deploy the new version of my code I first deploy it to new VMs, then switch traffic, then release the new VMs. In general such usage pattern is normal - VMs typically live from several dozen minutes to several weeks on Azure. I suspect the lease that long will cause problems on the internal Azure network sooner or later. Is such long DHCP lease okay or is it likely a misconfiguration?

    Read the article

  • Is it possible to change an "Unidentified Network" into a "Home" or "Work" network on Windows 7

    - by Rhys
    I have a problem with Windows 7 RC (7100). I frequently use a crossover network cable on WinXP with static IP addresses to connect to various industrial devices (e.g. robots, pumps, valves or even other Windows PCs) that have Ethernet network ports. When I do this on Windows 7, the network connection is classed as an "Unidentified Network" in Networks and Sharing Center and the public firewall profile is enforced by Windows. I do not want to change the public profile and would prefer to use the Home or Work profile instead. For other networks like Home and Work I'm able to click on them and change the classification. This is not available for unidentified networks. My questions are these:- Is there a way to manual override the "Unidentified Network" classification? What tests are performed on the network that fail, therefore classifying it as an "Unidentified Network" By googling (hitting mainly vista issues) it seems that you need to ensure that the default gateway is not 0.0.0.0. I've done this. I've also tried to remove IPv6 but this does not seem possible on Windows 7. UPDATE For those still having problems here is the answer to my issue and the possible reasons why:- Win7 keeps a list of the networks you visit by (I am assuming, but don’t know for sure) the MACID of the device pointed to by the Default Gateway. The default gateway is usually the constant device in a network (i.e. the NAT or router) so can be used to uniquely identify one network from another. The default gateway in the IPv4 properties panel must therefore point to an actual endpoint so windows can then keep track of it. If there is a device at the end of the Default Gateway windows will identify it and track it remembering its settings. The ways you can therefore fool Win7 is to either point the default gateway to your own IP address, or the IP address of the target device you’re communicating with. This will have the side effect of expecting that target device to start routing packets for IP destinations that are outside your subnet. So some applications on Win7 will try to communicate with the internet, these will be passed on to the default gateway (either back you the same IP address or a target device that is not a router) and thus will eventually timeout because neither can route packets. Which you can usually live with. This gets slightly complicated when you mix a this type of connection with a real connection to the internet via WIFI. The wired network card usually has priority when routing because of the “interface metric” so some applications might not connect correctly.

    Read the article

  • long access times and errors in iis application

    - by Jens Olsson
    Hi, I am having an issue with an IIS application (details of environment at the end of the message). The web site works great most of the time and I cannot reproduce any error in our test system. On the live system however with on averare of 5-15 requests per second I have a problem with that some requests (about 0.05%) will take over 300 seconds to complete. The other requests complete withing 5-10 seconds. It seem like if all the errornous requests end up with a Timer_EntityBody error in the error log. I have never seen this as an end user but I guess that they will receive some kind of error message. I am trying to find out what can be causing this errornous behaviour. Any ideas are welcome. I have read something about that there can be an MTU issue if ICMP and MTU protocols are blocked in the firewall. Does that sound reasonable? I have also read about updating to IIS 7 should do the trick. Does it sound reasonable? I think that the problem has another cause but I have no idea of what. I have tried running hte perormance monitor, monitoring for database locks and active transaction counts. I can see some of these in the perfmon log for the MSSQL server (another machine) for example: Active transactions is sometimes peaking and sometimes for long periods Lock waits per seconds is sometimes peaking Transactions per second is sometimes peaking Page IO Latch wait is sometimes peaking Lock wait time (ms) is sometimes peaking But I cannot see that any of these correlate to the errors in the IIS error log. On the IIS server machine I can also see with perfmon that some values peak a few times during a day: Request execution time Avg disk queue length I can neither see that any of these correlate to the errors in the IIS error log. In the below code I have anonymized by replacing some parts with HIDDEN The following can be seen in the access log 2010-10-01 08:35:05 W3SVC1301873091 **HIDDEN** POST /**HIDDEN**/Modules/BalanceModule.aspx - 80 - **HIDDEN** Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.1;+.NET+CLR+2.0.50727;+.NET+CLR+3.0.4506.2152;+.NET+CLR+3.5.30729;+.NET4.0C;+.NET4.0E) ASP.NET_SessionId=**HIDDEN** 400 0 64 0 2241 127799 At the same time the following can be seen in the error log: 2010-10-01 08:35:05 **HIDDEN** 1999 **HIDDEN** 80 HTTP/1.0 POST /**HIDDEN**/Modules/BalanceModule.aspx - 1301873091 Timer_EntityBody Test+Pool I can tell the following about the environment: Server: Windows Server 2003 x64 SP2 running on VMWare HTTP Server: IIS v6.0 with ASP.NET 2.0.50727 Antivirus: Trend Micro OfficeScan (Is it a good idea to have this on a server?)

    Read the article

  • Sony VGN-NR260E "External Device Boot"

    - by user72158
    [A LITTLE BACKGROUND] On all modern Dell computers pushing the F12 on bios boot will allow for a screen that lets you choose what boot option you need. For example if I want to boot off of a USB flash drive to boot into a live Linux distribution in order to clean virus's on netbooks that do not have CD drives to boot from I would push F12 and choose USB device from the list of options. If this does not show up then I can always go to the F2 bios setup and choose flash drive to be the first option. When I restart the computer it will boot into the flash device. I understand that I can purchase an external USB CD drive and then boot from that. I do not want to use that option. The reason for using a flash device instead of a CD is: A: This USB flash device has several different boot OS's on it that are used. B: The antivirus disks are updated often and burning cd's and throwing away others is wasteful compared to simply updating a flash drive. There is nothing wrong with the flash drive. It works perfect on many other PC's. [PROBLEM] Booting this flashdrive has been working for years on hundreds of computers... I just have this ONE computer that I cannot figure out how to get it to boot on... I have a Sony Vaio that will not boot to this device. I've tried pushing every key combo I can think of (F12, Esc, Del, F10...) and none of these key combinations will bring up the boot menu. I chose F2 and went into the bios and changed the first boot device to USB flash device. This did not work either. There is an astrix next to the device and the note states: "This Drive is available when External Device Boot is Enable." [WHAT I NEED] I need to know How to enable External Device Boot on the Sony Vaio VGN-NR260E laptop. OR How to bring up the Boot Menu to allow me to boot off a flash device. Thanks for anyone that can help!

    Read the article

  • mac + parallels and https site test = router restarts

    - by Erik
    Ok I have an interesting & very frustrating problem happening. I'm going to explain it the best I can. I work as a graphic designer & web designer on a mac and have a Comcast internet connection that comes through a Comcast branded router (SMC8014) which then ties into an Airport Extreme Base Station which runs my office network. I run OS 10.5.7 and also run Parallels 4.0.3 (running Windows XP) for testing websites in Internet Explorer and so on. Ok, so that the basic background. Here's my issue. I've been collaborating an ecommerce website with another designer/developer and when testing the site on the PC side we have started to run into some sort of network problem. The site is https if that matters at all I suspect it may. Basically when I run parallels for testing I am constantly having to restart the router in order to connect to the test site (it's hosted). Funny thing is I can access the rest of the internet fine, just not this site I'm working on until I restart the router (It's sorta like the site is timing out). This never happens when just running the Mac side of things. It only becomes an issue when Parallels is open and I am doing page refreshes while making css or HTML edits via something like Coda or CSS edit (connected to the hosting server via ftp). The real problem is that once the problem starts I only get about 2 or 3 page loads before I have to restart the router again. It's absolutely crippling. I cannot get any work done when I have to restart the router every couple of minutes. So, if you think this problem is isolated to me, the answer is no. The designer/developer I'm collaborating with has an office a couple miles away and experiences very similar problems under slightly different setup. He also has Comcast as his internet provider and connects his router to an Airport and primarily works on a mac. The main difference is that rather than using a visualizer like parallels to test the website on the PC he uses a real live PC that is on his network. Once he fire up the PC to do testing he runs into the same issue described above. After a couple of page refreshes in Internet Explorer or other browser on the PC the site becomes unresponsive and the router has to get restarted. Any thoughts on what is going on here would be greatly appreciated. Thanks in advance.

    Read the article

  • Building a Mac/PC Network in a Dorm with Network Restrictions

    - by user70340
    I have been a Windows XP user for the last few years, but I recently bought a 15'' MacBook Pro for research purposes. I would like to set up a no-hassle Mac/PC Network at home so that I can access the internet on both computers and hardware between computers (i.e. a harddrive, or a mouse/keyboard with Synergy). Unfortunately, I live in a dorm with silly network restrictions so a solution is not straightforward. In particular: The dorm has a wired and wireless network, both which provide an internet connection. The wired network provides way faster internet (download speeds of 15 MB/s vs. 2 MB/s on wireless), so I would like to somehow exploit this, at least on my PC for Bittorrent :) Multiple devices can connect to the wireless network, but cannot "see" each other on the network (so software like Synergy would not work). Only 1 MAC address can connect to the wired network at a time. Ideally I would just connect a wireless router to the wired network and then have both the Mac and the PC on that, but the 1 MAC address restriction will not allow the both computer to access the internet simultaneously. I cannot think of a way to bypass this restriction (though I'm not network savvy), so I am planning to create a private no-internet network to allow the devices to see each other and share hardware. Here are some thoughts. I would appreciate any feedback at all! If I build a private wireless network: (first choice) I will use a wireless router that is not connected to the internet. My PC and Mac will be connected to each other wirelessly. I can then connect the PC to the internet via a wired network, but then the Mac will not have internet access as its wireless card is already in use. In this case, could I stream internet access from the PC to the Mac via the wireless network? Or could I buy a USB wireless card for the Mac so that it can connect to both my private network and the dorm network? If I build a private wired network: (second choice) Then both the PC and the Mac will connect to the internet wirelessly, which means I cannot take advantage of the faster download speeds.

    Read the article

  • Broadcom HT1100 SATA controller not working properly with 1TB drives

    - by Jeff C
    I've been using RHEL distro's for several years and always managed to find the answers until now. I know this is more of a hardware issue, but I've been working on this for over a week and trust Linux and the IT community to help more then HP. I have CentOS 6.3 installed on an HP ProLiant DL145 G3 server with the BroadCom HT1100 IO controller and ServerWorks SATA Controller MMIO BIOS v3.0.0015.6 Firmware. This controller does not support large drives fully. Here's what I've tried and the results; Stock setup - Freezes on the ServerWorks POST screen. Can't even enter CMOS without disconnecting the drives. If I simply disconnect the SATA cables before it gets to the ServerWorks screen and reconnect afterwards I can boot from a CD, USB, PXE fine. However fiddling with cables at ever boot isn't practical. If I enter the BIOS config I can set it to not try booting the drives but leave the controller enabled. This lets me boot normally but the drives are not visible in the OS (live CDs or USB installed). I used method #2 to install and update CentOS. I have the /boot partition on a USB drive (everything else is on the SATA drives in software RAID1) hoping that would work around the issue but I get this Kernel panic - not syncing:Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.32-279.9.1.el6.x86_6 #1 Call Trace: [<ffffffff814fd6ba>] ? panic+0xa0/0x168 [<ffffffff81070c22>] ? do_exit+0x862/0x870 [<ffffffff8117cdb5>] ? fput+0x25/0x30 [<ffffffff81070c88>] ? do_group_exit+0x58/0xd0 [<ffffffff81070d17>] ? sys_exit_group+0x17/0x20 [<ffffffff8100b0f2>] ? system_call_fastpath+0x16/0x1b panic occured, switching back to text console I'm sure it should be possible to talk to the drives without the BIOS boot check since the BIOS doesn't see them in method #2 either, their disconnected when it checks, but Linux sees them fine. If anyone could help figure out how I would greatly appreciate it! The other possible option I've come across is a complex firmware update. Tyan has a few boards on their website with the HT1100 and a ServerWorks v3.0.0015.7 update which says "adds support for TB drives" in the release notes. If someone could help me get the Tyan SATA firmware into the HP ROM file so I could just reflash that would also be very much appreciated. Thanks for any help you guys can offer!

    Read the article

  • Unable to burn Windows ISO from Fedora

    - by user331947
    First of all, English is not my native tongue, so apologies for any mistakes. My computer recently started prompting that it can't launch Windows successfully. So I just choose start Windows normally. Then, I found that the startup freezes at the Windows screen (before the login prompt). I have tried rebooting several times and get the same results. So I just gave up. After few days, I tried to boot up my laptop again. This time it got to the desktop, but it's extremely slow and the icons on my Desktop don't show up. I decided to format the Windows partition and reinstall a new one. (It is usually faster that way since I kept my 400GB+ data on aother partition and programs and the rest in the same partition as Windows). The thing is I get the Windows disc at the moment (Traveling aboard). But I have a Windows 7 disc image on my hard disk. So, I downloaded Ubuntu 14.04 LTS, made a Live USB, and then try to burn the image from Ubuntu. But the program just freezes and I don't know why. I tried several times and it's still the same. So I tried using Fedora instead, just to see if it will work. The Disk Image Writer report something like this. Error unmounting /dev/dm-0: Command-line `umount "/dev/dm-0"' exited with non-zero exit status 32: umount: /: target is busy (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1).) (udisks-error-quark, 14) Also, I tried installing linux on the windows partition. The installation program freezes (both Ubuntu and Fedora). So, I thought that maybe something are wrong with my hard disk. I seek the solution on the internet and found that gparted can be used to format a partition. And it also froze at "Searching /dev/sda/ partition ...". I'm using Lenovo Y570. Spec below. http://www.notebookreview.com/notebookreview/lenovo-ideapad-y570-review-a-lenovo-bestseller/3/ Can anyone suggest a next step in diagnosing and fixing this problem? Thanks in advance.

    Read the article

  • Thunderbird 3: can't change column width?

    - by rumtscho
    I recently installed Thunderbird 3.0.3. Just noticed a suboptimal UI setting: in the upper pane, which lists the e-mails in the current folder, the Date column is about 200px wide. So when I keep the window at 480x600, all I see in a row is: | tree icon | favourites icon | attachment icon | read icon | junk icon | Date and time, followed by 5cm whitespace | ... | P Where "P" is the first letter of the name of the sender. And the "..." is actually shown this way, I have no idea which column it is meant to be. But I don't see neither the sender, nor the message subject, which makes scrolling a folder for a certain mail rather pointless. I see these when I maximize the window, actually the columns are then not only bigger, they are arranged in another sequence. But I feel that holding a mail client permanently maximised at 1600x1200 is a waste of screen real estate. My naive solution attempt was to try to go with the mouse cursor to the right edge of the date column and try to shrink it by moving the cursor left while holding down the left mouse button. Not only is this default behaviour for all resizable columns I've ever encountered in GUIs, the cursor actually turns into a horizontal double-headed arrow. But pulling has no effect at all. I cannot make a wide column narrow, and I cannot make the narrow columns wide. I didn't find anything in the preferences either. So can please somebody explain how to get the columns arranged sensibly? Edit: I found out that I only have the problem when I drag the Thunderbird window to a GridMove screen area. It gets automatically resized, but doesn't notice the resize event or something, so the column width remains the same as under a maximized window. First making the window narrow using the mouse helps with column width, but the width of the mail pane is still too wide (rows don't reflow). Anyway, this seems to be a bug caused by the combination of the two applications and not a configuration problem, so I guess I'll have to live with it.

    Read the article

  • Fedora 11 System - Failed Hard Drive Removed, and Boot gets GRUB Hard Disk Error

    - by Mindful
    Greetings, I have a machine with a 120GB ATA drive that has what I thought to be non-essential data on it. I also have a 320GB SATA hard drive with the OS/Application/Files (good data I want to keep). My 120GB ATA is failing I believe, as my computer kept slowing to a halt. However, when I move the drive from BIOS my computer will not start, says "GRUB Hard Disk Error". I know that my Fedora system has an LVM setup. I am looking to just remove the 120GB drive from "the mix", and just have one hard drive. How do I recover ? Thank you. I have access to a Linux Live CD right now and can make any changes. However, it won't boot into my OS - it fails. UPDATE: here's my Grub.Conf # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd1,0) # kernel /vmlinuz-version ro root=/dev/VolGroup00/LogVol00 # initrd /initrd-version.img #boot=/dev/sda1 default=0 timeout=5 splashimage=(hd1,0)/grub/splash.xpm.gz hiddenmenu title Fedora (2.6.30.10-105.2.23.fc11.i686.PAE) root (hd1,0) kernel /vmlinuz-2.6.30.10-105.2.23.fc11.i686.PAE ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.30.10-105.2.23.fc11.i686.PAE.img title Fedora (2.6.30.9-102.fc11.i686.PAE) root (hd1,0) kernel /vmlinuz-2.6.30.9-102.fc11.i686.PAE ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.30.9-102.fc11.i686.PAE.img title Fedora (2.6.27.24-170.2.68.fc10.i686.PAE) root (hd1,0) kernel /vmlinuz-2.6.27.24-170.2.68.fc10.i686.PAE ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.24-170.2.68.fc10.i686.PAE.img title Fedora (2.6.27.24-170.2.68.fc10.i686) root (hd1,0) kernel /vmlinuz-2.6.27.24-170.2.68.fc10.i686 ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.24-170.2.68.fc10.i686.img title Fedora (2.6.27.21-170.2.56.fc10.i686) root (hd1,0) kernel /vmlinuz-2.6.27.21-170.2.56.fc10.i686 ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.21-170.2.56.fc10.i686.img title Fedora (2.6.27.19-170.2.35.fc10.i686) root (hd1,0) kernel /vmlinuz-2.6.27.19-170.2.35.fc10.i686 ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.19-170.2.35.fc10.i686.img title Upgrade to Fedora 10 (Cambridge) kernel /upgrade/vmlinuz preupgrade repo=hd::/var/cache/yum/preupgrade stage2=http://chi-10g-1-mirror.fastsoft.net/pub/linux/fedora/linux/releases/10/Fedora/i386/os/images/install.img ks=hd:UUID=f11769ba-29bc-46de-8c40-a949720a438e:/upgrade/ks.cfg initrd /upgrade/initrd.img title Win rootnoverify (hd0,0) chainloader +1

    Read the article

  • What issues ensue from having multiple versions of Office installed?

    - by Michael Sorens
    My ultimate question is embodied in the title but I thought it might be helpful to others if I detail what instigated my inquiry and my examination of the problem. To me, the first rule of software updates is Primum non nocere -- first, do no harm. So with my Windows 7 system containing both Office 2003 and Office 2010 I blithely proceeded to install this month's updates from Microsoft, containing updates for both versions of Office. While Microsoft officially does not recommend running multiple versions (see, for example, Running Multiple Versions of Microsoft Excel it is possible; I have had two versions installed for a year or more and have never run into an issue before. One thing that is always mentioned is installation order, i.e., the one you want to open files by default should be installed last. I wanted 2010 as my default so I had indeed installed 2003 first then, years later, 2010. So with this round of Windows updates, either it installed patches to 2010 before 2003, knocking out the file association, or the 2003 patch was more comprehensive, in the sense of touching the file association while the 2010 did not. In any case, after updates, double-clicking a .xls file opened 2003 rather than 2010. Web search indicated either: Use the file associations control panel to re-associate .xls files with the correct version of excel. I looked at this first, but it showed what seemed to be an unversioned "Excel" associated with .xls files so I did not check further. (This turned out to be an error on my part; more later.) Re-install versions in the desired order; I find this unreasonable. Run the repair option of the Office installer on the desired version; still seems more work than one should need. Run excel from the command line with "/regserver" on the one to be the default and "/unregserver" on the other. Good idea, but further search indicated that neither 2007 nor 2010 support "/regserver" contrary to some posts (e.g. Default Program With Multiple Versions Installed). Since this was a Windows Update issue and Microsoft provides free support for such, I inquired there as well, but succeeded only in getting the suggestion to uninstall all other versions, period; not acceptable to me. What worked for me was going back to the file associations control panel and manually selected the Office 2010 version of Excel. While it appeared no different in the control panel, it did fix the double-click issue. So if all it takes is this simple fix after an update, I can live with that. What I am wondering is: Has anyone seen any other problems related to having multiple versions of Office installed?

    Read the article

  • ISPconfig3 + CentOS 6.2 , confused on how to move forward after initial install?

    - by Damainman
    I installed ISPCONFIG3 on centos 6.2 using the great guide on howtoforge.com. Everything is up and running and I can access ISPCONFIG via a browser. However I am not sure how to move forward with the initial setup so I can setup the very first account and get my website live. Details: Only have 1 server, the centos+ispconfig is running on a virtual machine of XEN XCP. I setup the server name to be server1.mydomain.com. I only have 2 usable ips. I plan to use them as follows: xx.xx.xx.01 : For my website and the websites of all accounts I add. xx.xx.xx.02 : For ns1.mydomain.com and ns2.mydomain.com (Yea I know they should be different ips at different locations, but this is what I have to work with at the moment.... ) I registered the nameservers at my registrar with the .02 ip. I want to use bind and ISPconfig to run the DNS on my server itself and not via my registrar. Right now if I go to the .01 IP it shows the centos+apache successful install page. So to break it down basically I am not sure where to start when it comes to: (What to consider and what to do to setup the first domain on the server) Telling bind to use the name server domains with .02. Setting up my First website(which will be my main website) in ISPconfig so mydomain.com resolves properly to my server. Make it so when you go to the .01 IP, it either redirects or shows the contents of my main website. (If this can't be done, then any advice is appreciated) Making sure that when I add a new domain, it automatically puts in the proper information for the domain so it points to the right mail, database, dns, entry. If I overlooked a tutorial then please feel free to let me know, and any advice would be greatly appreciated. Some of the tutorials I found were not specific to doing everything on only one server with Centos+Apache+Bind. Right now all I did was install centos and install ISPconfig3. Trying to move forward correctly so I don't mess up everything I did by not knowing what to do. Thank you in advance!!

    Read the article

< Previous Page | 303 304 305 306 307 308 309 310 311 312 313 314  | Next Page >