Search Results

Search found 10661 results on 427 pages for 'move semantics'.

Page 307/427 | < Previous Page | 303 304 305 306 307 308 309 310 311 312 313 314  | Next Page >

  • Grounded in Dublin

    - by Mike Dietrich
    Friday's hands-on workshop in the Oracle office in Dublin was quite good fun for everybody - except for Mick who has just recognized that his Ryanair flight back to Cork has been canceled (So I hope you've returned home well!) and me as my flights back to Munich via London City had been canceled as well. It's always good to have somebody in the workshop from Air Lingus so I've got hourly information what's going in in the Irish airspace (and now I know that the system dealing with such situations is an well prepared Oracle database which runs just like a switch watch - Thanks again for all your support!!! Was great to talk to you!!!). But to be honest, there are worse places to be grounded for a few days than Dublin. At least it gave me the chance to do something which I never had time enough before when visiting Oracle Ireland: a bit of sightseeing. When I've realized that nothing seems to move over the weekend I started organizing my travel back yesterday. It was no fun at all because there's no single system to book such a travel. Figuring out all possibilities and options going back to Munich was the first challange. Irish Ferries webpage was moaning with all the unexpected load (currently it's fully down). Hotel booking websites showed vacancies in Holyhead but didn't let me book. And calling them just reveiled that there are no rooms left. Haven't stayed overnight in a train station for quite a while ;-) The website of VirginTrains puzzled me with offering a seat at an enormous price for a train ride from Holyhead to London Euston (Thanks, Sir Richard Branson!) just to tell me after I booked a ticket that there are no seats left (but I traveled German railsways a few weeks ago from Düsseldorf to Frankfurt sitting on the floor as well). Eurostar's website let me choose tickets through the tunnel to tell me in the final step that the ticket cannot be confirmed as there are no seats left - but the next check again showed bookable seats - must be a database from some other vendor which has no proper row level locking ... hm ...?! Finally the TGV page for the speed train to Stuttgart and then the ICE to Munich was not allowing searches for quite a while - but ultimately ... after 4.5 hours of searching, waiting, sending credit card information again and again ... So if you have a few spare fingers please keep them crossed :-) And good luck to all my colleagues traveling back from the Exadata training in Berlin. As Mike Appleyard, my colleague from the UK presales team wrote: "Dublin and Berlin aren't too bad a place to get stuck... ;-)"

    Read the article

  • An easy way to create Side by Side registrationless COM Manifests with Visual Studio

    - by Rick Strahl
    Here's something I didn't find out until today: You can use Visual Studio to easily create registrationless COM manifest files for you with just a couple of small steps. Registrationless COM lets you use COM component without them being registered in the registry. This means it's possible to deploy COM components along with another application using plain xcopy semantics. To be sure it's rarely quite that easy - you need to watch out for dependencies - but if you know you have COM components that are light weight and have no or known dependencies it's easy to get everything into a single folder and off you go. Registrationless COM works via manifest files which carry the same name as the executable plus a .manifest extension (ie. yourapp.exe.manifest) I'm going to use a Visual FoxPro COM object as an example and create a simple Windows Forms app that calls the component - without that component being registered. Let's take a walk down memory lane… Create a COM Component I start by creating a FoxPro COM component because that's what I know and am working with here in my legacy environment. You can use VB classic or C++ ATL object if that's more to your liking. Here's a real simple Fox one: DEFINE CLASS SimpleServer as Session OLEPUBLIC FUNCTION HelloWorld(lcName) RETURN "Hello " + lcName ENDDEFINE Compile it into a DLL COM component with: BUILD MTDLL simpleserver FROM simpleserver RECOMPILE And to make sure it works test it quickly from Visual FoxPro: server = CREATEOBJECT("simpleServer.simpleserver") MESSAGEBOX( server.HelloWorld("Rick") ) Using Visual Studio to create a Manifest File for a COM Component Next open Visual Studio and create a new executable project - a Console App or WinForms or WPF application will all do. Go to the References Node Select Add Reference Use the Browse tab and find your compiled DLL to import  Next you'll see your assembly in the project. Right click on the reference and select Properties Click on the Isolated DropDown and select True Compile and that's all there's to it. Visual Studio will create a App.exe.manifest file right alongside your application's EXE. The manifest file created looks like this: xml version="1.0" encoding="utf-8"? assembly xsi:schemaLocation="urn:schemas-microsoft-com:asm.v1 assembly.adaptive.xsd" manifestVersion="1.0" xmlns:asmv1="urn:schemas-microsoft-com:asm.v1" xmlns:asmv2="urn:schemas-microsoft-com:asm.v2" xmlns:asmv3="urn:schemas-microsoft-com:asm.v3" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#" xmlns:co.v1="urn:schemas-microsoft-com:clickonce.v1" xmlns:co.v2="urn:schemas-microsoft-com:clickonce.v2" xmlns="urn:schemas-microsoft-com:asm.v1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" assemblyIdentity name="App.exe" version="1.0.0.0" processorArchitecture="x86" type="win32" / file name="simpleserver.DLL" asmv2:size="27293" hash xmlns="urn:schemas-microsoft-com:asm.v2" dsig:Transforms dsig:Transform Algorithm="urn:schemas-microsoft-com:HashTransforms.Identity" / dsig:Transforms dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1" / dsig:DigestValuepuq+ua20bbidGOWhPOxfquztBCU=dsig:DigestValue hash typelib tlbid="{f10346e2-c9d9-47f7-81d1-74059cc15c3c}" version="1.0" helpdir="" resourceid="0" flags="HASDISKIMAGE" / comClass clsid="{af2c2811-0657-4264-a1f5-06d033a969ff}" threadingModel="Apartment" tlbid="{f10346e2-c9d9-47f7-81d1-74059cc15c3c}" progid="simpleserver.SimpleServer" description="simpleserver.SimpleServer" / file assembly Now let's finish our super complex console app to test with: using System; using System.Collections.Generic; using System.Text; namespace ConsoleApplication1 {     class Program     {         static voidMain(string[] args)         { Type type = Type.GetTypeFromProgID("simpleserver.simpleserver",true); dynamic server = Activator.CreateInstance(type); Console.WriteLine(server.HelloWorld("rick")); Console.ReadLine(); } } } Now run the Console Application… As expected that should work. And why not? The COM component is still registered, right? :-) Nothing tricky about that. Let's unregister the COM component and then re-run and see what happens. Go to the Command Prompt Change to the folder where the DLL is installed Unregister with: RegSvr32 -u simpleserver.dll      To be sure that the COM component no longer works, check it out with the same test you used earlier (ie. o = CREATEOBJECT("SimpleServer.SimpleServer") in your development environment or VBScript etc.). Make sure you run the EXE and you don't re-compile the application or else Visual Studio will complain that it can't find the COM component in the registry while compiling. In fact now that we have our .manifest file you can remove the COM object from the project. When you run run the EXE from Windows Explorer or a command prompt to avoid the recompile. Watch out for embedded Manifest Files Now recompile your .NET project and run it… and it will most likely fail! The problem is that .NET applications by default embeds a manifest file into the compiled EXE application which results in the externally created manifest file being completely ignored. Only one manifest can be applied at a time and the compiled manifest takes precedency. Uh, thanks Visual Studio - not very helpful… Note that if you use another development tool like Visual FoxPro to create your EXE this won't be an issue as long as the tool doesn't automatically add a manifest file. Creating a Visual FoxPro EXE for example will work immediately with the generated manifest file as is. If you are using .NET and Visual Studio you have a couple of options of getting around this: Remove the embedded manifest file Copy the contents of the generated manifest file into a project manifest file and compile that in To remove an embedded manifest in a Visual Studio project: Open the Project Properties (Alt-Enter on project node) Go down to Resources | Manifest and select | Create Application without a Manifest   You can now add use the external manifest file and it will actually be respected when the app runs. The other option is to let Visual Studio create the manifest file on disk and then explicitly add the manifest file into the project. Notice on the dialog above I did this for app.exe.manifest and the manifest actually shows up in the list. If I select this file it will be compiled into the EXE and be used in lieu of any external files and that works as well. Remove the simpleserver.dll reference so you can compile your code and run the application. Now it should work without COM registration of the component. Personally I prefer external manifests because they can be modified after the fact - compiled manifests are evil in my mind because they are immutable - once they are there they can't be overriden or changed. So I prefer an external manifest. However, if you are absolutely sure nothing needs to change and you don't want anybody messing with your manifest, you can also embed it. The option to either is there. Watch for Manifest Caching While working trying to get this to work I ran into some problems at first. Specifically when it wasn't working at first (due to the embedded schema) I played with various different manifest layouts in different files etc.. There are a number of different ways to actually represent manifest files including offloading to separate folder (more on that later). A few times I made deliberate errors in the schema file and I found that regardless of what I did once the app failed or worked no amount of changing of the manifest file would make it behave differently. It appears that Windows is caching the manifest data for a given EXE or DLL. It takes a restart or a recompile of either the EXE or the DLL to clear the caching. Recompile your servers in order to see manifest changes unless there's an outright failure of an invalid manifest file. If the app starts the manifest is being read and caches immediately. This can be very confusing especially if you don't know that it's happening. I found myself always recompiling the exe after each run and before making any changes to the manifest file. Don't forget about Runtimes of COM Objects In the example I used above I used a Visual FoxPro COM component. Visual FoxPro is a runtime based environment so if I'm going to distribute an application that uses a FoxPro COM object the runtimes need to be distributed as well. The same is true of classic Visual Basic applications. Assuming that you don't know whether the runtimes are installed on the target machines make sure to install all the additional files in the EXE's directory alongside the COM DLL. In the case of Visual FoxPro the target folder should contain: The EXE  App.exe The Manifest file (unless it's compiled in) App.exe.manifest The COM object DLL (simpleserver.dll) Visual FoxPro Runtimes: VFP9t.dll (or VFP9r.dll for non-multithreaded dlls), vfp9rENU.dll, msvcr71.dll All these files should be in the same folder. Debugging Manifest load Errors If you for some reason get your manifest loading wrong there are a couple of useful tools available - SxSTrace and SxSParse. These two tools can be a huge help in debugging manifest loading errors. Put the following into a batch file (SxS_Trace.bat for example): sxstrace Trace -logfile:sxs.bin sxstrace Parse -logfile:sxs.bin -outfile:sxs.txt Then start the batch file before running your EXE. Make sure there's no caching happening as described in the previous section. For example, if I go into the manifest file and explicitly break the CLSID and/or ProgID I get a detailed report on where the EXE is looking for the manifest and what it's reading. Eventually the trace gives me an error like this: INFO: Parsing Manifest File C:\wwapps\Conf\SideBySide\Code\app.EXE.     INFO: Manifest Definition Identity is App.exe,processorArchitecture="x86",type="win32",version="1.0.0.0".     ERROR: Line 13: The value {AAaf2c2811-0657-4264-a1f5-06d033a969ff} of attribute clsid in element comClass is invalid. ERROR: Activation Context generation failed. End Activation Context Generation. pinpointing nicely where the error lies. Pay special attention to the various attributes - they have to match exactly in the different sections of the manifest file(s). Multiple COM Objects The manifest file that Visual Studio creates is actually quite more complex than is required for basic registrationless COM object invokation. The manifest file can be simplified a lot actually by stripping off various namespaces and removing the type library references altogether. Here's an example of a simplified manifest file that actually includes references to 2 COM servers: xml version="1.0" encoding="utf-8"? assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0" assemblyIdentity name="App.exe" version="1.0.0.0" processorArchitecture="x86" type="win32" / file name="simpleserver.DLL" comClass clsid="{af2c2811-0657-4264-a1f5-06d033a969ff}" threadingModel="Apartment" progid="simpleserver.SimpleServer" description="simpleserver.SimpleServer" / file file name = "sidebysidedeploy.dll" comClass clsid="{EF82B819-7963-4C36-9443-3978CD94F57C}" progid="sidebysidedeploy.SidebysidedeployServer" description="SidebySideDeploy Server" threadingModel="apartment" / file assembly Simple enough right? Routing to separate Manifest Files and Folders In the examples above all files ended up in the application's root folder - all the DLLs, support files and runtimes. Sometimes that's not so desirable and you can actually create separate manifest files. The easiest way to do this is to create a manifest file that 'routes' to another manifest file in a separate folder. Basically you create a new 'assembly identity' via a named id. You can then create a folder and another manifest with the id plus .manifest that points at the actual file. In this example I create: App.exe.manifest A folder called App.deploy A manifest file in App.deploy All DLLs and runtimes in App.deploy Let's start with that master manifest file. This file only holds a reference to another manifest file: App.exe.manifest xml version="1.0" encoding="UTF-8" standalone="yes"? assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0" assemblyIdentity name="App.exe" version="1.0.0.0" processorArchitecture="x86" type="win32" / dependency dependentAssembly assemblyIdentity name="App.deploy" version="1.0.0.0" type="win32" / dependentAssembly dependency assembly   Note this file only contains a dependency to App.deploy which is another manifest id. I can then create App.deploy.manifest in the current folder or in an App.deploy folder. In this case I'll create App.deploy and in it copy the DLLs and support runtimes. I then create App.deploy.manifest. App.deploy.manifest xml version="1.0" encoding="UTF-8" standalone="yes"? assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0" assemblyIdentity name="App.deploy" type="win32" version="1.0.0.0" / file name="simpleserver.DLL" comClass clsid="{af2c2811-0657-4264-a1f5-06d033a969ff}" threadingModel="Apartment" progid="simpleserver.SimpleServer" description="simpleserver.SimpleServer" / file file name="sidebysidedeploy.dll" comClass clsid="{EF82B819-7963-4C36-9443-3978CD94F57C}" threadingModel="Apartment" progid="sidebysidedeploy.SidebysidedeployServer" description="SidebySideDeploy Server" / file assembly   In this manifest file I then host my COM DLLs and any support runtimes. This is quite useful if you have lots of DLLs you are referencing or if you need to have separate configuration and application files that are associated with the COM object. This way the operation of your main application and the COM objects it interacts with is somewhat separated. You can see the two folders here:   Routing Manifests to different Folders In theory registrationless COM should be pretty easy in painless - you've seen the configuration manifest files and it certainly doesn't look very complicated, right? But the devil's in the details. The ActivationContext API (SxS - side by side activation) is very intolerant of small errors in the XML or formatting of the keys, so be really careful when setting up components, especially if you are manually editing these files. If you do run into trouble SxsTrace/SxsParse are a huge help to track down the problems. And remember that if you do have problems that you'll need to recompile your EXEs or DLLs for the SxS APIs to refresh themselves properly. All of this gets even more fun if you want to do registrationless COM inside of IIS :-) But I'll leave that for another blog post…© Rick Strahl, West Wind Technologies, 2005-2011Posted in COM  .NET  FoxPro   Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Forbes Announcing The World’s Top 20 Billionaires

    - by Suganya
    Forbes company recently conducted a survey to figure out the world’s Billionaires list and has released it listing the top 20 names of the Billionaires. The company says that for the third time in the last three years the world has a new richest man for this year. So it means that Bill Gates was beaten up by someone else in world. Who is the new richest man in the world?   Forbes.Com announced the richest man in world and this time it is not Bill Gates. But it is Carlos Slim Helu who is into Telecom industry. Carlos lives in Mexico and he had the third richest man’s place last year. Having shown a Net worth of $ 53.5 Billion, Carlos has increased $18.5 Billion in a year. Carlos swooped on the privatization of Mexico’s national telephone service during the last decade and now has achieved the world’s first richest man. Following Carlos, in the second position is Bill Gates with the Nett worth of $53 Billion. As Bill Gates requires no great introduction, lets move on to the next place. The third place is occupied by Warren Buffett followed by Mukesh Ambani and Lakshmi Mittal in fourth and fifth places respectively. The top 20 names of world’s richest people, their occupation and the Nett worth that they hold are S.No Name Nett Worth (in $ Billion) Source of Income 1 Carlos Slim Helu 53.5 Telecom 2 Bill Gates 53 Microsoft 3 Warren Buffett 47 Investments 4 Mukesh Ambani 29 Petrochemical, Oil and Gas 5 Lakshmi Mittal 28.7 Steel 6 Lawrence Ellison 28 Oracle 7 Bernard Arnault 27.5 Luxury Goods 8 Eike Batista 27 Mining, Oil 9 Amancio Ortega 25 Fashion, Retail 10 Karl Albrecht 23.5 Supermarkets 11 Ingvar Kamprad and Family 23 IKEA 12 Christy Walton and Family 22.5 Wal-Mart 13 Stefan Persson 22.4 H & M 14 Li Ka-shing 21 Diversified 15 Jim C. Walton 20.7 Wal-Mart 16 Alice Walton 20.6 Wal-Mart 17 Liliane Bettencourt 20 L’Oreal 18 S. Robson Walton 19.8 Wal-Mart 19 Prince Alwaleed bin Talal Alsaud 19.4 Diversified 20 David Thomson and Family 19 Thomson Reuters   Source: Forbes and Image Credit : kevindooley Join us on Facebook to read all our stories right inside your Facebook news feed.

    Read the article

  • Metro: Introduction to CSS 3 Grid Layout

    - by Stephen.Walther
    The purpose of this blog post is to provide you with a quick introduction to the new W3C CSS 3 Grid Layout standard. You can use CSS Grid Layout in Metro style applications written with JavaScript to lay out the content of an HTML page. CSS Grid Layout provides you with all of the benefits of using HTML tables for layout without requiring you to actually use any HTML table elements. Doing Page Layouts without Tables Back in the 1990’s, if you wanted to create a fancy website, then you would use HTML tables for layout. For example, if you wanted to create a standard three-column page layout then you would create an HTML table with three columns like this: <table height="100%"> <tr> <td valign="top" width="300px" bgcolor="red"> Left Column, Left Column, Left Column, Left Column, Left Column, Left Column, Left Column, Left Column, Left Column </td> <td valign="top" bgcolor="green"> Middle Column, Middle Column, Middle Column, Middle Column, Middle Column, Middle Column, Middle Column, Middle Column, Middle Column </td> <td valign="top" width="300px" bgcolor="blue"> Right Column, Right Column, Right Column, Right Column, Right Column, Right Column, Right Column, Right Column, Right Column </td> </tr> </table> When the table above gets rendered out to a browser, you end up with the following three-column layout: The width of the left and right columns is fixed – the width of the middle column expands or contracts depending on the width of the browser. Sometime around the year 2005, everyone decided that using tables for layout was a bad idea. Instead of using tables for layout — it was collectively decided by the spirit of the Web — you should use Cascading Style Sheets instead. Why is using HTML tables for layout bad? Using tables for layout breaks the semantics of the TABLE element. A TABLE element should be used only for displaying tabular information such as train schedules or moon phases. Using tables for layout is bad for accessibility (The Web Content Accessibility Guidelines 1.0 is explicit about this) and using tables for layout is bad for separating content from layout (see http://CSSZenGarden.com). Post 2005, anyone who used HTML tables for layout were encouraged to hold their heads down in shame. That’s all well and good, but the problem with using CSS for layout is that it can be more difficult to work with CSS than HTML tables. For example, to achieve a standard three-column layout, you either need to use absolute positioning or floats. Here’s a three-column layout with floats: <style type="text/css"> #container { min-width: 800px; } #leftColumn { float: left; width: 300px; height: 100%; background-color:red; } #middleColumn { background-color:green; height: 100%; } #rightColumn { float: right; width: 300px; height: 100%; background-color:blue; } </style> <div id="container"> <div id="rightColumn"> Right Column, Right Column, Right Column, Right Column, Right Column, Right Column, Right Column, Right Column, Right Column </div> <div id="leftColumn"> Left Column, Left Column, Left Column, Left Column, Left Column, Left Column, Left Column, Left Column, Left Column </div> <div id="middleColumn"> Middle Column, Middle Column, Middle Column, Middle Column, Middle Column, Middle Column, Middle Column, Middle Column, Middle Column </div> </div> The page above contains four DIV elements: a container DIV which contains a leftColumn, middleColumn, and rightColumn DIV. The leftColumn DIV element is floated to the left and the rightColumn DIV element is floated to the right. Notice that the rightColumn DIV appears in the page before the middleColumn DIV – this unintuitive ordering is necessary to get the floats to work correctly (see http://stackoverflow.com/questions/533607/css-three-column-layout-problem). The page above (almost) works with the most recent versions of most browsers. For example, you get the correct three-column layout in both Firefox and Chrome: And the layout mostly works with Internet Explorer 9 except for the fact that for some strange reason the min-width doesn’t work so when you shrink the width of your browser, you can get the following unwanted layout: Notice how the middle column (the green column) bleeds to the left and right. People have solved these issues with more complicated CSS. For example, see: http://matthewjamestaylor.com/blog/holy-grail-no-quirks-mode.htm But, at this point, no one could argue that using CSS is easier or more intuitive than tables. It takes work to get a layout with CSS and we know that we could achieve the same layout more easily using HTML tables. Using CSS Grid Layout CSS Grid Layout is a new W3C standard which provides you with all of the benefits of using HTML tables for layout without the disadvantage of using an HTML TABLE element. In other words, CSS Grid Layout enables you to perform table layouts using pure Cascading Style Sheets. The CSS Grid Layout standard is still in a “Working Draft” state (it is not finalized) and it is located here: http://www.w3.org/TR/css3-grid-layout/ The CSS Grid Layout standard is only supported by Internet Explorer 10 and there are no signs that any browser other than Internet Explorer will support this standard in the near future. This means that it is only practical to take advantage of CSS Grid Layout when building Metro style applications with JavaScript. Here’s how you can create a standard three-column layout using a CSS Grid Layout: <!DOCTYPE html> <html> <head> <style type="text/css"> html, body, #container { height: 100%; padding: 0px; margin: 0px; } #container { display: -ms-grid; -ms-grid-columns: 300px auto 300px; -ms-grid-rows: 100%; } #leftColumn { -ms-grid-column: 1; background-color:red; } #middleColumn { -ms-grid-column: 2; background-color:green; } #rightColumn { -ms-grid-column: 3; background-color:blue; } </style> </head> <body> <div id="container"> <div id="leftColumn"> Left Column, Left Column, Left Column, Left Column, Left Column, Left Column, Left Column, Left Column, Left Column </div> <div id="middleColumn"> Middle Column, Middle Column, Middle Column, Middle Column, Middle Column, Middle Column, Middle Column, Middle Column, Middle Column </div> <div id="rightColumn"> Right Column, Right Column, Right Column, Right Column, Right Column, Right Column, Right Column, Right Column, Right Column </div> </div> </body> </html> When the page above is rendered in Internet Explorer 10, you get a standard three-column layout: The page above contains four DIV elements: a container DIV which contains a leftColumn DIV, middleColumn DIV, and rightColumn DIV. The container DIV is set to Grid display mode with the following CSS rule: #container { display: -ms-grid; -ms-grid-columns: 300px auto 300px; -ms-grid-rows: 100%; } The display property is set to the value “-ms-grid”. This property causes the container DIV to lay out its child elements in a grid. (Notice that you use “-ms-grid” instead of “grid”. The “-ms-“ prefix is used because the CSS Grid Layout standard is still preliminary. This implementation only works with IE10 and it might change before the final release.) The grid columns and rows are defined with the “-ms-grid-columns” and “-ms-grid-rows” properties. The style rule above creates a grid with three columns and one row. The left and right columns are fixed sized at 300 pixels. The middle column sizes automatically depending on the remaining space available. The leftColumn, middleColumn, and rightColumn DIVs are positioned within the container grid element with the following CSS rules: #leftColumn { -ms-grid-column: 1; background-color:red; } #middleColumn { -ms-grid-column: 2; background-color:green; } #rightColumn { -ms-grid-column: 3; background-color:blue; } The “-ms-grid-column” property is used to specify the column associated with the element selected by the style sheet selector. The leftColumn DIV is positioned in the first grid column, the middleColumn DIV is positioned in the second grid column, and the rightColumn DIV is positioned in the third grid column. I find using CSS Grid Layout to be just as intuitive as using an HTML table for layout. You define your columns and rows and then you position different elements within these columns and rows. Very straightforward. Creating Multiple Columns and Rows In the previous section, we created a super simple three-column layout. This layout contained only a single row. In this section, let’s create a slightly more complicated layout which contains more than one row: The following page contains a header row, a content row, and a footer row. The content row contains three columns: <!DOCTYPE html> <html> <head> <style type="text/css"> html, body, #container { height: 100%; padding: 0px; margin: 0px; } #container { display: -ms-grid; -ms-grid-columns: 300px auto 300px; -ms-grid-rows: 100px 1fr 100px; } #header { -ms-grid-column: 1; -ms-grid-column-span: 3; -ms-grid-row: 1; background-color: yellow; } #leftColumn { -ms-grid-column: 1; -ms-grid-row: 2; background-color:red; } #middleColumn { -ms-grid-column: 2; -ms-grid-row: 2; background-color:green; } #rightColumn { -ms-grid-column: 3; -ms-grid-row: 2; background-color:blue; } #footer { -ms-grid-column: 1; -ms-grid-column-span: 3; -ms-grid-row: 3; background-color: orange; } </style> </head> <body> <div id="container"> <div id="header"> Header, Header, Header </div> <div id="leftColumn"> Left Column, Left Column, Left Column, Left Column, Left Column, Left Column, Left Column, Left Column, Left Column </div> <div id="middleColumn"> Middle Column, Middle Column, Middle Column, Middle Column, Middle Column, Middle Column, Middle Column, Middle Column, Middle Column </div> <div id="rightColumn"> Right Column, Right Column, Right Column, Right Column, Right Column, Right Column, Right Column, Right Column, Right Column </div> <div id="footer"> Footer, Footer, Footer </div> </div> </body> </html> In the page above, the grid layout is created with the following rule which creates a grid with three rows and three columns: #container { display: -ms-grid; -ms-grid-columns: 300px auto 300px; -ms-grid-rows: 100px 1fr 100px; } The header is created with the following rule: #header { -ms-grid-column: 1; -ms-grid-column-span: 3; -ms-grid-row: 1; background-color: yellow; } The header is positioned in column 1 and row 1. Furthermore, notice that the “-ms-grid-column-span” property is used to span the header across three columns. CSS Grid Layout and Fractional Units When you use CSS Grid Layout, you can take advantage of fractional units. Fractional units provide you with an easy way of dividing up remaining space in a page. Imagine, for example, that you want to create a three-column page layout. You want the size of the first column to be fixed at 200 pixels and you want to divide the remaining space among the remaining three columns. The width of the second column is equal to the combined width of the third and fourth columns. The following CSS rule creates four columns with the desired widths: #container { display: -ms-grid; -ms-grid-columns: 200px 2fr 1fr 1fr; -ms-grid-rows: 1fr; } The fr unit represents a fraction. The grid above contains four columns. The second column is two times the size (2fr) of the third (1fr) and fourth (1fr) columns. When you use the fractional unit, the remaining space is divided up using fractional amounts. Notice that the single row is set to a height of 1fr. The single grid row gobbles up the entire vertical space. Here’s the entire HTML page: <!DOCTYPE html> <html> <head> <style type="text/css"> html, body, #container { height: 100%; padding: 0px; margin: 0px; } #container { display: -ms-grid; -ms-grid-columns: 200px 2fr 1fr 1fr; -ms-grid-rows: 1fr; } #firstColumn { -ms-grid-column: 1; background-color:red; } #secondColumn { -ms-grid-column: 2; background-color:green; } #thirdColumn { -ms-grid-column: 3; background-color:blue; } #fourthColumn { -ms-grid-column: 4; background-color:orange; } </style> </head> <body> <div id="container"> <div id="firstColumn"> First Column, First Column, First Column </div> <div id="secondColumn"> Second Column, Second Column, Second Column </div> <div id="thirdColumn"> Third Column, Third Column, Third Column </div> <div id="fourthColumn"> Fourth Column, Fourth Column, Fourth Column </div> </div> </body> </html>   Summary There is more in the CSS 3 Grid Layout standard than discussed in this blog post. My goal was to describe the basics. If you want to learn more than you can read through the entire standard at http://www.w3.org/TR/css3-grid-layout/ In this blog post, I described some of the difficulties that you might encounter when attempting to replace HTML tables with Cascading Style Sheets when laying out a web page. I explained how you can take advantage of the CSS 3 Grid Layout standard to avoid these problems when building Metro style applications using JavaScript. CSS 3 Grid Layout provides you with all of the benefits of using HTML tables for laying out a page without requiring you to use HTML table elements.

    Read the article

  • The best, in the West

    - by Fatherjack
    As many of you know, I run the SQL South West user group and we are currently in full flow preparing to stage the UK’s second SQL Saturday. The SQL Saturday spotlight is going to fall on Exeter in March 2013. We have full-day session on Friday 8th with some truly amazing speakers giving their insights and experience into some vital areas of working with SQL Server: Dave Ballantyne and Dave Morrison – TSQL and internals Christian Bolton and Gavin Payne – Mission critical data platforms on Windows Server 2012 Denny Cherry – SQL Server Security André Kamman – Powershell 3.0 for SQL Server Administrators and Developers Mladen Prajdic – From SQL Traces to Extended Events – The next big switch. A number of people have claimed that the choice is too good and they’d have trouble selecting just one session to attend. I can see how this is a problem but hope that they make their minds up quickly. The venue is a bespoke conference suite in the centre of Exeter but has limited capacity so we are working on a first-come first-served basis. All the session details and booking and travel information can be found on our user group website. The Saturday will be a day of free, 50 minute sessions on all aspects SQL Server from almost 30 different speakers. If you would like to submit a session then get a move on as submissions close on 8th January 2013 (That’s less than a month away). We are really interested in getting new speakers started so we have a lightning talk session where you can come along and give a small talk (anywhere from 5 to 15 minutes long) about anything connected with SQL Server as a way to introduce you to what it’s like to be a speaker at an event. Details on registering to attend and to submit a session (Lightning talks need to be submitted too please) can be found on our SQL Saturday pages. This is going to be the biggest and best bespoke SQL Server conference to ever take place this far South West in the UK and we aim to give everyone who comes to either day a real experience of the South West so we have a few surprises for you on the day.

    Read the article

  • Older SAS1 hardware Vs. newer SAS2 hardware

    - by user12620172
    I got a question today from someone asking about the older SAS1 hardware from over a year ago that we had on the older 7x10 series. They didn't leave an email so I couldn't respond directly, but I said this blog would be blunt, frank, and open so I have no problem addressing it publicly. A quick history lesson here: When Sun first put out the 7x10 family hardware, the 7410 and 7310 used a SAS1 backend connection to a JBOD that had SATA drives in it. This JBOD was not manufactured by Sun nor did Sun own the IP for it. Now, when Oracle took over, they had a problem with that, and I really can’t blame them. The decision was made to cut off that JBOD and it’s manufacturer completely and use our own where Oracle controlled both the IP and the manufacturing. So in the summer of 2010, the cut was made, and the 7410 and 7310 had a hardware refresh and now had a SAS2 backend going to a SAS2 JBOD with SAS2 drives instead of SATA. This new hardware had two big advantages. First, there was a nice performance increase, mostly due to the faster backend. Even better, the SAS2 interface on the drives allowed for a MUCH faster failover between cluster heads, as the SATA drives were the bottleneck on the older hardware. In September of 2010 there was a major refresh of the rest of the 7000 hardware, the controllers and the other family members, and that’s where we got today’s current line-up of the 7x20 series. So the 7x20 has always used the new trays, and the 7410 and 7310 have used the new SAS2 trays since last July of 2010. Now for the bad news. People who have the 7410 and 7310 from BEFORE the July 2010 cutoff have the models with SAS1 HBAs in them to connect to the older SAS1 trays. Remember, that manufacturer cut all ties with us and stopped making the JBOD, so there’s just no way to get more of them, as they don’t exist. There are some options, however. Oracle support does support taking out the SAS1 HBAs in the old 7410 and 7310 and put in newer SAS2 HBAs which can talk to the new trays. Hey, I didn’t say it was a great option, I just said it’s an option. I fully realize that you would then have a SAS1 JBOD full of SATA drives that you could no longer connect. I do know a client that did this, and took the SAS1 JBOD and connected it to another server and formatted the drives and is using it as a plain, non-7000 JBOD. This is not supported by Oracle support. The other option is to just keep it as-is, as it works just fine, but you just can’t expand it. Then you can get a newer 7x20 series, and use the built-in ZFSSA replication feature to move the data over. Now you can use the newer one for your production data and use the older one for DR, snaps and clones.

    Read the article

  • Toorcon14

    - by danx
    Toorcon 2012 Information Security Conference San Diego, CA, http://www.toorcon.org/ Dan Anderson, October 2012 It's almost Halloween, and we all know what that means—yes, of course, it's time for another Toorcon Conference! Toorcon is an annual conference for people interested in computer security. This includes the whole range of hackers, computer hobbyists, professionals, security consultants, press, law enforcement, prosecutors, FBI, etc. We're at Toorcon 14—see earlier blogs for some of the previous Toorcon's I've attended (back to 2003). This year's "con" was held at the Westin on Broadway in downtown San Diego, California. The following are not necessarily my views—I'm just the messenger—although I could have misquoted or misparaphrased the speakers. Also, I only reviewed some of the talks, below, which I attended and interested me. MalAndroid—the Crux of Android Infections, Aditya K. Sood Programming Weird Machines with ELF Metadata, Rebecca "bx" Shapiro Privacy at the Handset: New FCC Rules?, Valkyrie Hacking Measured Boot and UEFI, Dan Griffin You Can't Buy Security: Building the Open Source InfoSec Program, Boris Sverdlik What Journalists Want: The Investigative Reporters' Perspective on Hacking, Dave Maas & Jason Leopold Accessibility and Security, Anna Shubina Stop Patching, for Stronger PCI Compliance, Adam Brand McAfee Secure & Trustmarks — a Hacker's Best Friend, Jay James & Shane MacDougall MalAndroid—the Crux of Android Infections Aditya K. Sood, IOActive, Michigan State PhD candidate Aditya talked about Android smartphone malware. There's a lot of old Android software out there—over 50% Gingerbread (2.3.x)—and most have unpatched vulnerabilities. Of 9 Android vulnerabilities, 8 have known exploits (such as the old Gingerbread Global Object Table exploit). Android protection includes sandboxing, security scanner, app permissions, and screened Android app market. The Android permission checker has fine-grain resource control, policy enforcement. Android static analysis also includes a static analysis app checker (bouncer), and a vulnerablity checker. What security problems does Android have? User-centric security, which depends on the user to grant permission and make smart decisions. But users don't care or think about malware (the're not aware, not paranoid). All they want is functionality, extensibility, mobility Android had no "proper" encryption before Android 3.0 No built-in protection against social engineering and web tricks Alternative Android app markets are unsafe. Simply visiting some markets can infect Android Aditya classified Android Malware types as: Type A—Apps. These interact with the Android app framework. For example, a fake Netflix app. Or Android Gold Dream (game), which uploads user files stealthy manner to a remote location. Type K—Kernel. Exploits underlying Linux libraries or kernel Type H—Hybrid. These use multiple layers (app framework, libraries, kernel). These are most commonly used by Android botnets, which are popular with Chinese botnet authors What are the threats from Android malware? These incude leak info (contacts), banking fraud, corporate network attacks, malware advertising, malware "Hackivism" (the promotion of social causes. For example, promiting specific leaders of the Tunisian or Iranian revolutions. Android malware is frequently "masquerated". That is, repackaged inside a legit app with malware. To avoid detection, the hidden malware is not unwrapped until runtime. The malware payload can be hidden in, for example, PNG files. Less common are Android bootkits—there's not many around. What they do is hijack the Android init framework—alteering system programs and daemons, then deletes itself. For example, the DKF Bootkit (China). Android App Problems: no code signing! all self-signed native code execution permission sandbox — all or none alternate market places no robust Android malware detection at network level delayed patch process Programming Weird Machines with ELF Metadata Rebecca "bx" Shapiro, Dartmouth College, NH https://github.com/bx/elf-bf-tools @bxsays on twitter Definitions. "ELF" is an executable file format used in linking and loading executables (on UNIX/Linux-class machines). "Weird machine" uses undocumented computation sources (I think of them as unintended virtual machines). Some examples of "weird machines" are those that: return to weird location, does SQL injection, corrupts the heap. Bx then talked about using ELF metadata as (an uintended) "weird machine". Some ELF background: A compiler takes source code and generates a ELF object file (hello.o). A static linker makes an ELF executable from the object file. A runtime linker and loader takes ELF executable and loads and relocates it in memory. The ELF file has symbols to relocate functions and variables. ELF has two relocation tables—one at link time and another one at loading time: .rela.dyn (link time) and .dynsym (dynamic table). GOT: Global Offset Table of addresses for dynamically-linked functions. PLT: Procedure Linkage Tables—works with GOT. The memory layout of a process (not the ELF file) is, in order: program (+ heap), dynamic libraries, libc, ld.so, stack (which includes the dynamic table loaded into memory) For ELF, the "weird machine" is found and exploited in the loader. ELF can be crafted for executing viruses, by tricking runtime into executing interpreted "code" in the ELF symbol table. One can inject parasitic "code" without modifying the actual ELF code portions. Think of the ELF symbol table as an "assembly language" interpreter. It has these elements: instructions: Add, move, jump if not 0 (jnz) Think of symbol table entries as "registers" symbol table value is "contents" immediate values are constants direct values are addresses (e.g., 0xdeadbeef) move instruction: is a relocation table entry add instruction: relocation table "addend" entry jnz instruction: takes multiple relocation table entries The ELF weird machine exploits the loader by relocating relocation table entries. The loader will go on forever until told to stop. It stores state on stack at "end" and uses IFUNC table entries (containing function pointer address). The ELF weird machine, called "Brainfu*k" (BF) has: 8 instructions: pointer inc, dec, inc indirect, dec indirect, jump forward, jump backward, print. Three registers - 3 registers Bx showed example BF source code that implemented a Turing machine printing "hello, world". More interesting was the next demo, where bx modified ping. Ping runs suid as root, but quickly drops privilege. BF modified the loader to disable the library function call dropping privilege, so it remained as root. Then BF modified the ping -t argument to execute the -t filename as root. It's best to show what this modified ping does with an example: $ whoami bx $ ping localhost -t backdoor.sh # executes backdoor $ whoami root $ The modified code increased from 285948 bytes to 290209 bytes. A BF tool compiles "executable" by modifying the symbol table in an existing ELF executable. The tool modifies .dynsym and .rela.dyn table, but not code or data. Privacy at the Handset: New FCC Rules? "Valkyrie" (Christie Dudley, Santa Clara Law JD candidate) Valkyrie talked about mobile handset privacy. Some background: Senator Franken (also a comedian) became alarmed about CarrierIQ, where the carriers track their customers. Franken asked the FCC to find out what obligations carriers think they have to protect privacy. The carriers' response was that they are doing just fine with self-regulation—no worries! Carriers need to collect data, such as missed calls, to maintain network quality. But carriers also sell data for marketing. Verizon sells customer data and enables this with a narrow privacy policy (only 1 month to opt out, with difficulties). The data sold is not individually identifiable and is aggregated. But Verizon recommends, as an aggregation workaround to "recollate" data to other databases to identify customers indirectly. The FCC has regulated telephone privacy since 1934 and mobile network privacy since 2007. Also, the carriers say mobile phone privacy is a FTC responsibility (not FCC). FTC is trying to improve mobile app privacy, but FTC has no authority over carrier / customer relationships. As a side note, Apple iPhones are unique as carriers have extra control over iPhones they don't have with other smartphones. As a result iPhones may be more regulated. Who are the consumer advocates? Everyone knows EFF, but EPIC (Electrnic Privacy Info Center), although more obsecure, is more relevant. What to do? Carriers must be accountable. Opt-in and opt-out at any time. Carriers need incentive to grant users control for those who want it, by holding them liable and responsible for breeches on their clock. Location information should be added current CPNI privacy protection, and require "Pen/trap" judicial order to obtain (and would still be a lower standard than 4th Amendment). Politics are on a pro-privacy swing now, with many senators and the Whitehouse. There will probably be new regulation soon, and enforcement will be a problem, but consumers will still have some benefit. Hacking Measured Boot and UEFI Dan Griffin, JWSecure, Inc., Seattle, @JWSdan Dan talked about hacking measured UEFI boot. First some terms: UEFI is a boot technology that is replacing BIOS (has whitelisting and blacklisting). UEFI protects devices against rootkits. TPM - hardware security device to store hashs and hardware-protected keys "secure boot" can control at firmware level what boot images can boot "measured boot" OS feature that tracks hashes (from BIOS, boot loader, krnel, early drivers). "remote attestation" allows remote validation and control based on policy on a remote attestation server. Microsoft pushing TPM (Windows 8 required), but Google is not. Intel TianoCore is the only open source for UEFI. Dan has Measured Boot Tool at http://mbt.codeplex.com/ with a demo where you can also view TPM data. TPM support already on enterprise-class machines. UEFI Weaknesses. UEFI toolkits are evolving rapidly, but UEFI has weaknesses: assume user is an ally trust TPM implicitly, and attached to computer hibernate file is unprotected (disk encryption protects against this) protection migrating from hardware to firmware delays in patching and whitelist updates will UEFI really be adopted by the mainstream (smartphone hardware support, bank support, apathetic consumer support) You Can't Buy Security: Building the Open Source InfoSec Program Boris Sverdlik, ISDPodcast.com co-host Boris talked about problems typical with current security audits. "IT Security" is an oxymoron—IT exists to enable buiness, uptime, utilization, reporting, but don't care about security—IT has conflict of interest. There's no Magic Bullet ("blinky box"), no one-size-fits-all solution (e.g., Intrusion Detection Systems (IDSs)). Regulations don't make you secure. The cloud is not secure (because of shared data and admin access). Defense and pen testing is not sexy. Auditors are not solution (security not a checklist)—what's needed is experience and adaptability—need soft skills. Step 1: First thing is to Google and learn the company end-to-end before you start. Get to know the management team (not IT team), meet as many people as you can. Don't use arbitrary values such as CISSP scores. Quantitive risk assessment is a myth (e.g. AV*EF-SLE). Learn different Business Units, legal/regulatory obligations, learn the business and where the money is made, verify company is protected from script kiddies (easy), learn sensitive information (IP, internal use only), and start with low-hanging fruit (customer service reps and social engineering). Step 2: Policies. Keep policies short and relevant. Generic SANS "security" boilerplate policies don't make sense and are not followed. Focus on acceptable use, data usage, communications, physical security. Step 3: Implementation: keep it simple stupid. Open source, although useful, is not free (implementation cost). Access controls with authentication & authorization for local and remote access. MS Windows has it, otherwise use OpenLDAP, OpenIAM, etc. Application security Everyone tries to reinvent the wheel—use existing static analysis tools. Review high-risk apps and major revisions. Don't run different risk level apps on same system. Assume host/client compromised and use app-level security control. Network security VLAN != segregated because there's too many workarounds. Use explicit firwall rules, active and passive network monitoring (snort is free), disallow end user access to production environment, have a proxy instead of direct Internet access. Also, SSL certificates are not good two-factor auth and SSL does not mean "safe." Operational Controls Have change, patch, asset, & vulnerability management (OSSI is free). For change management, always review code before pushing to production For logging, have centralized security logging for business-critical systems, separate security logging from administrative/IT logging, and lock down log (as it has everything). Monitor with OSSIM (open source). Use intrusion detection, but not just to fulfill a checkbox: build rules from a whitelist perspective (snort). OSSEC has 95% of what you need. Vulnerability management is a QA function when done right: OpenVas and Seccubus are free. Security awareness The reality is users will always click everything. Build real awareness, not compliance driven checkbox, and have it integrated into the culture. Pen test by crowd sourcing—test with logging COSSP http://www.cossp.org/ - Comprehensive Open Source Security Project What Journalists Want: The Investigative Reporters' Perspective on Hacking Dave Maas, San Diego CityBeat Jason Leopold, Truthout.org The difference between hackers and investigative journalists: For hackers, the motivation varies, but method is same, technological specialties. For investigative journalists, it's about one thing—The Story, and they need broad info-gathering skills. J-School in 60 Seconds: Generic formula: Person or issue of pubic interest, new info, or angle. Generic criteria: proximity, prominence, timeliness, human interest, oddity, or consequence. Media awareness of hackers and trends: journalists becoming extremely aware of hackers with congressional debates (privacy, data breaches), demand for data-mining Journalists, use of coding and web development for Journalists, and Journalists busted for hacking (Murdock). Info gathering by investigative journalists include Public records laws. Federal Freedom of Information Act (FOIA) is good, but slow. California Public Records Act is a lot stronger. FOIA takes forever because of foot-dragging—it helps to be specific. Often need to sue (especially FBI). CPRA is faster, and requests can be vague. Dumps and leaks (a la Wikileaks) Journalists want: leads, protecting ourselves, our sources, and adapting tools for news gathering (Google hacking). Anonomity is important to whistleblowers. They want no digital footprint left behind (e.g., email, web log). They don't trust encryption, want to feel safe and secure. Whistleblower laws are very weak—there's no upside for whistleblowers—they have to be very passionate to do it. Accessibility and Security or: How I Learned to Stop Worrying and Love the Halting Problem Anna Shubina, Dartmouth College Anna talked about how accessibility and security are related. Accessibility of digital content (not real world accessibility). mostly refers to blind users and screenreaders, for our purpose. Accessibility is about parsing documents, as are many security issues. "Rich" executable content causes accessibility to fail, and often causes security to fail. For example MS Word has executable format—it's not a document exchange format—more dangerous than PDF or HTML. Accessibility is often the first and maybe only sanity check with parsing. They have no choice because someone may want to read what you write. Google, for example, is very particular about web browser you use and are bad at supporting other browsers. Uses JavaScript instead of links, often requiring mouseover to display content. PDF is a security nightmare. Executible format, embedded flash, JavaScript, etc. 15 million lines of code. Google Chrome doesn't handle PDF correctly, causing several security bugs. PDF has an accessibility checker and PDF tagging, to help with accessibility. But no PDF checker checks for incorrect tags, untagged content, or validates lists or tables. None check executable content at all. The "Halting Problem" is: can one decide whether a program will ever stop? The answer, in general, is no (Rice's theorem). The same holds true for accessibility checkers. Language-theoretic Security says complicated data formats are hard to parse and cannot be solved due to the Halting Problem. W3C Web Accessibility Guidelines: "Perceivable, Operable, Understandable, Robust" Not much help though, except for "Robust", but here's some gems: * all information should be parsable (paraphrasing) * if not parsable, cannot be converted to alternate formats * maximize compatibility in new document formats Executible webpages are bad for security and accessibility. They say it's for a better web experience. But is it necessary to stuff web pages with JavaScript for a better experience? A good example is The Drudge Report—it has hand-written HTML with no JavaScript, yet drives a lot of web traffic due to good content. A bad example is Google News—hidden scrollbars, guessing user input. Solutions: Accessibility and security problems come from same source Expose "better user experience" myth Keep your corner of Internet parsable Remember "Halting Problem"—recognize false solutions (checking and verifying tools) Stop Patching, for Stronger PCI Compliance Adam Brand, protiviti @adamrbrand, http://www.picfun.com/ Adam talked about PCI compliance for retail sales. Take an example: for PCI compliance, 50% of Brian's time (a IT guy), 960 hours/year was spent patching POSs in 850 restaurants. Often applying some patches make no sense (like fixing a browser vulnerability on a server). "Scanner worship" is overuse of vulnerability scanners—it gives a warm and fuzzy and it's simple (red or green results—fix reds). Scanners give a false sense of security. In reality, breeches from missing patches are uncommon—more common problems are: default passwords, cleartext authentication, misconfiguration (firewall ports open). Patching Myths: Myth 1: install within 30 days of patch release (but PCI §6.1 allows a "risk-based approach" instead). Myth 2: vendor decides what's critical (also PCI §6.1). But §6.2 requires user ranking of vulnerabilities instead. Myth 3: scan and rescan until it passes. But PCI §11.2.1b says this applies only to high-risk vulnerabilities. Adam says good recommendations come from NIST 800-40. Instead use sane patching and focus on what's really important. From NIST 800-40: Proactive: Use a proactive vulnerability management process: use change control, configuration management, monitor file integrity. Monitor: start with NVD and other vulnerability alerts, not scanner results. Evaluate: public-facing system? workstation? internal server? (risk rank) Decide:on action and timeline Test: pre-test patches (stability, functionality, rollback) for change control Install: notify, change control, tickets McAfee Secure & Trustmarks — a Hacker's Best Friend Jay James, Shane MacDougall, Tactical Intelligence Inc., Canada "McAfee Secure Trustmark" is a website seal marketed by McAfee. A website gets this badge if they pass their remote scanning. The problem is a removal of trustmarks act as flags that you're vulnerable. Easy to view status change by viewing McAfee list on website or on Google. "Secure TrustGuard" is similar to McAfee. Jay and Shane wrote Perl scripts to gather sites from McAfee and search engines. If their certification image changes to a 1x1 pixel image, then they are longer certified. Their scripts take deltas of scans to see what changed daily. The bottom line is change in TrustGuard status is a flag for hackers to attack your site. Entire idea of seals is silly—you're raising a flag saying if you're vulnerable.

    Read the article

  • WPF vs. WinForms - a Delphi programmer's perspective?

    - by Robert Oschler
    I have read most of the major threads on WPF vs. WinForms and I find myself stuck in the unfortunate ambivalence you can fall into when deciding between the tried and true previous tech (Winforms), and it's successor (WPF). I am a veteran Delphi programmer of many years that is finally making the jump to C#. My fellow Delphi programmers out there will understand that I am excited to know that Anders Hejlsberg, of Delphi fame, was the architect behind C#. I have a strong addiction to Delphi's VCL custom components, especially those involved in making multi-step Wizards and components that act as a container for child components. With that background, I am hoping that those of you that switched from Delphi to C# can help me with my WinForms vs. WPF decision for writing my initial applications. Note, I am very impatient when coding and things like full fledged auto-complete and proper debugger support can make or break a project for me, including being able to find readily available information on API features and calls and even more so, workarounds for bugs. The SO threads and comments in the early 2009 date range give me great concern over WPF when it comes to potential frustrations that could mar my C# UI development coding. On the other hand, spending an inordinate amount of time learning an API tech that is, even if it is not abandoned, soon to be replaced (WinForms), is equally troubling and I do find the GPU support in WPF tantalizing. Hence my ambivalence. Since I haven't learned either tech yet I have a rare opportunity to get a fresh start and not have to face the big "unlearning" curve I've seen people mention in various threads when a WinForms programmer makes the move to WPF. On the other hand, if using WPF will just be too frustrating or have other major negative consequences for an impatient RAD developer like myself, then I'll just stick with WinForms until WPF reaches the same level of support and ease of use. To give you a concrete example into my psychology as a programmer, I used VB and subsequently Delphi to completely avoid altogether the very real pain of coding with MFC, a Windows UI library that many developers suffered through while developing early Windows apps. I have never regretted my luck in avoiding MFC. It would also be comforting to know if Anders Hejlsberg had a hand in the architecture of WPF and/or WinForms, and if there are any disparities in the creative vision and ease of use embodied in either code base. Finally, for the Delphi programmers again, let me know how much "IDE schock" I'm in for when using WPF as opposed to WinForms, especially when it comes to debugger support. Any job market comments updated for 2011 would be appreciated too. -- roschler

    Read the article

  • .NET Reflector Pro Coming…

    The very best software is almost always originally the creation of a single person. Readers of our 'Geek of the Week' will know of a few of them.  Even behemoths such as MS Word or Excel started out with one programmer.  There comes a time with any software that it starts to grow up, and has to move from this form of close parenting to being developed by a team.  This has happened several times within Red-Gate: SQL Refactor, SQL Compare, and SQL Dependency Tracker, not to mention SQL Backup, were all originally the work of a lone coder, who subsequently handed over the development to a structured team of programmers, test engineers and usability designers. Because we loved .NET Reflector when Lutz Roeder wrote and nurtured it, and, like many other .NET developers, used it as a development tool ourselves, .NET Reflector's progress from being the apple of Lutz's eye to being a Red-Gate team-based development  seemed natural.  Lutz, after all, eventually felt he couldn't afford the time to develop it to the extent it deserved. Why, then, did we want to take on .NET Reflector?  Different people may give you different answers, but for us in the .NET team, it just seemed a natural progression. We're always very surprised when anyone suggests that we want to change the nature of the tool since it seems right just as it is. .NET Reflector will stay very much the tool we all use and appreciate, although the new version will support .NET 4, and will have many improvements in the accuracy of its decompiling. Whilst we've made a lot of improvements to Reflector, the radical addition, which we hope you'll want to try out as well, is '.NET Reflector Pro'. This is an extension to .NET Reflector that allows the debugging of decompiled code using the Visual Studio debugger. It is an add-in, but we'll be charging for it, mainly because we prefer to live indoors with a warm meal, rather than outside in tents, particularly when the winter's been as cold as this one has. We're hoping (we're even pretty confident!) that you'll share our excitement about .NET Reflector Pro. .NET Reflector Pro integrates .NET Reflector into Visual Studio, allowing you to seamlessly debug into third-party code and assemblies, even if you don't have the source code for them. You can now treat decompiled assemblies much like your own code: you can step through them and use all the debugging techniques that you would use on your own code. Try the beta now. span.fullpost {display:none;}

    Read the article

  • Built-in GZip/Deflate Compression on IIS 7.x

    - by Rick Strahl
    IIS 7 improves internal compression functionality dramatically making it much easier than previous versions to take advantage of compression that’s built-in to the Web server. IIS 7 also supports dynamic compression which allows automatic compression of content created in your own applications (ASP.NET or otherwise!). The scheme is based on content-type sniffing and so it works with any kind of Web application framework. While static compression on IIS 7 is super easy to set up and turned on by default for most text content (text/*, which includes HTML and CSS, as well as for JavaScript, Atom, XAML, XML), setting up dynamic compression is a bit more involved, mostly because the various default compression settings are set in multiple places down the IIS –> ASP.NET hierarchy. Let’s take a look at each of the two approaches available: Static Compression Compresses static content from the hard disk. IIS can cache this content by compressing the file once and storing the compressed file on disk and serving the compressed alias whenever static content is requested and it hasn’t changed. The overhead for this is minimal and should be aggressively enabled. Dynamic Compression Works against application generated output from applications like your ASP.NET apps. Unlike static content, dynamic content must be compressed every time a page that requests it regenerates its content. As such dynamic compression has a much bigger impact than static caching. How Compression is configured Compression in IIS 7.x  is configured with two .config file elements in the <system.WebServer> space. The elements can be set anywhere in the IIS/ASP.NET configuration pipeline all the way from ApplicationHost.config down to the local web.config file. The following is from the the default setting in ApplicationHost.config (in the %windir%\System32\inetsrv\config forlder) on IIS 7.5 with a couple of small adjustments (added json output and enabled dynamic compression): <?xml version="1.0" encoding="UTF-8"?> <configuration> <system.webServer> <httpCompression directory="%SystemDrive%\inetpub\temp\IIS Temporary Compressed Files"> <scheme name="gzip" dll="%Windir%\system32\inetsrv\gzip.dll" staticCompressionLevel="9" /> <dynamicTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/x-javascript" enabled="true" /> <add mimeType="application/json" enabled="true" /> <add mimeType="*/*" enabled="false" /> </dynamicTypes> <staticTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/x-javascript" enabled="true" /> <add mimeType="application/atom+xml" enabled="true" /> <add mimeType="application/xaml+xml" enabled="true" /> <add mimeType="*/*" enabled="false" /> </staticTypes> </httpCompression> <urlCompression doStaticCompression="true" doDynamicCompression="true" /> </system.webServer> </configuration> You can find documentation on the httpCompression and urlCompression keys here respectively: http://msdn.microsoft.com/en-us/library/ms690689%28v=vs.90%29.aspx http://msdn.microsoft.com/en-us/library/aa347437%28v=vs.90%29.aspx The httpCompression Element – What and How to compress Basically httpCompression configures what types to compress and how to compress them. It specifies the DLL that handles gzip encoding and the types of documents that are to be compressed. Types are set up based on mime-types which looks at returned Content-Type headers in HTTP responses. For example, I added the application/json to mime type to my dynamic compression types above to allow that content to be compressed as well since I have quite a bit of AJAX content that gets sent to the client. The UrlCompression Element – Enables and Disables Compression The urlCompression element is a quick way to turn compression on and off. By default static compression is enabled server wide, and dynamic compression is disabled server wide. This might be a bit confusing because the httpCompression element also has a doDynamicCompression attribute which is set to true by default, but the urlCompression attribute by the same name actually overrides it. The urlCompression element only has three attributes: doStaticCompression, doDynamicCompression and dynamicCompressionBeforeCache. The doCompression attributes are the final determining factor whether compression is enabled, so it’s a good idea to be explcit! The default for doDynamicCompression='false”, but doStaticCompression="true"! Static Compression is enabled by Default, Dynamic Compression is not Because static compression is very efficient in IIS 7 it’s enabled by default server wide and there probably is no reason to ever change that setting. Dynamic compression however, since it’s more resource intensive, is turned off by default. If you want to enable dynamic compression there are a few quirks you have to deal with, namely that enabling it in ApplicationHost.config doesn’t work. Setting: <urlCompression doDynamicCompression="true" /> in applicationhost.config appears to have no effect and I had to move this element into my local web.config to make dynamic compression work. This is actually a smart choice because you’re not likely to want dynamic compression in every application on a server. Rather dynamic compression should be applied selectively where it makes sense. However, nowhere is it documented that the setting in applicationhost.config doesn’t work (or more likely is overridden somewhere and disabled lower in the configuration hierarchy). So: remember to set doDynamicCompression=”true” in web.config!!! How Static Compression works Static compression works against static content loaded from files on disk. Because this content is static and not bound to change frequently – such as .js, .css and static HTML content – it’s fairly easy for IIS to compress and then cache the compressed content. The way this works is that IIS compresses the files into a special folder on the server’s hard disk and then reads the content from this location if already compressed content is requested and the underlying file resource has not changed. The semantics of serving an already compressed file are very efficient – IIS still checks for file changes, but otherwise just serves the already compressed file from the compression folder. The compression folder is located at: %windir%\inetpub\temp\IIS Temporary Compressed Files\ApplicationPool\ If you look into the subfolders you’ll find compressed files: These files are pre-compressed and IIS serves them directly to the client until the underlying files are changed. As I mentioned before – static compression is on by default and there’s very little reason to turn that functionality off as it is efficient and just works out of the box. The one tweak you might want to do is to set the compression level to maximum. Since IIS only compresses content very infrequently it would make sense to apply maximum compression. You can do this with the staticCompressionLevel setting on the scheme element: <scheme name="gzip" dll="%Windir%\system32\inetsrv\gzip.dll" staticCompressionLevel="9" /> Other than that the default settings are probably just fine. Dynamic Compression – not so fast! By default dynamic compression is disabled and that’s actually quite sensible – you should use dynamic compression very carefully and think about what content you want to compress. In most applications it wouldn’t make sense to compress *all* generated content as it would generate a significant amount of overhead. Scott Fortsyth has a great post that details some of the performance numbers and how much impact dynamic compression has. Depending on how busy your server is you can play around with compression and see what impact it has on your server’s performance. There are also a few settings you can tweak to minimize the overhead of dynamic compression. Specifically the httpCompression key has a couple of CPU related keys that can help minimize the impact of Dynamic Compression on a busy server: dynamicCompressionDisableCpuUsage dynamicCompressionEnableCpuUsage By default these are set to 90 and 50 which means that when the CPU hits 90% compression will be disabled until CPU utilization drops back down to 50%. Again this is actually quite sensible as it utilizes CPU power from compression when available and falling off when the threshold has been hit. It’s a good way some of that extra CPU power on your big servers to use when utilization is low. Again these settings are something you likely have to play with. I would probably set the upper limit a little lower than 90% maybe around 70% to make this a feature that kicks in only if there’s lots of power to spare. I’m not really sure how accurate these CPU readings that IIS uses are as Cpu usage on Web Servers can spike drastically even during low loads. Don’t trust settings – do some load testing or monitor your server in a live environment to see what values make sense for your environment. Finally for dynamic compression I tend to add one Mime type for JSON data, since a lot of my applications send large chunks of JSON data over the wire. You can do that with the application/json content type: <add mimeType="application/json" enabled="true" /> What about Deflate Compression? The default compression is GZip. The documentation hints that you can use a different compression scheme and mentions Deflate compression. And sure enough you can change the compression settings to: <scheme name="deflate" dll="%Windir%\system32\inetsrv\gzip.dll" staticCompressionLevel="9" /> to get deflate style compression. The deflate algorithm produces slightly more compact output so I tend to prefer it over GZip but more HTTP clients (other than browsers) support GZip than Deflate so be careful with this option if you build Web APIs. I also had some issues with the above value actually being applied right away. Changing the scheme in applicationhost.config didn’t show up on the site  right away. It required me to do a full IISReset to get that change to show up before I saw the change over to deflate compressed content. Content was slightly more compressed with deflate – not sure if it’s worth the slightly less common compression type, but the option at least is available. IIS 7 finally makes GZip Easy In summary IIS 7 makes GZip easy finally, even if the configuration settings are a bit obtuse and the documentation is seriously lacking. But once you know the basic settings I’ve described here and the fact that you can override all of this in your local web.config it’s pretty straight forward to configure GZip support and tweak it exactly to your needs. Static compression is a total no brainer as it adds very little overhead compared to direct static file serving and provides solid compression. Dynamic Compression is a little more tricky as it does add some overhead to servers, so it probably will require some tweaking to get the right balance of CPU load vs. compression ratios. Looking at large sites like Amazon, Yahoo, NewEgg etc. – they all use Related Content Code based ASP.NET GZip Caveats HttpWebRequest and GZip Responses © Rick Strahl, West Wind Technologies, 2005-2011Posted in IIS7   ASP.NET  

    Read the article

  • WPF vs. WinForms - a Delphi programmer's perspective?

    - by Robert Oschler
    Hello all. I have read most of the major threads on WPF vs. WinForms and I find myself stuck in the unfortunate ambivalence you can fall into when deciding between the tried and true previous tech (Winforms), and it's successor (WPF). I am a veteran Delphi programmer of many years that is finally making the jump to C#. My fellow Delphi programmers out there will understand that I am excited to know that Anders Hejlsberg, of Delphi fame, was the architect behind C#. I have a strong addiction to Delphi's VCL custom components, especially those involved in making multi-step Wizards and components that act as a container for child components. With that background, I am hoping that those of you that switched from Delphi to C# can help me with my WinForms vs. WPF decision for writing my initial applications. Note, I am very impatient when coding and things like full fledged auto-complete and proper debugger support can make or break a project for me, including being able to find readily available information on API features and calls and even more so, workarounds for bugs. The SO threads and comments in the early 2009 date range give me great concern over WPF when it comes to potential frustrations that could mar my C# UI development coding. On the other hand, spending an inordinate amount of time learning an API tech that is, even if it is not abandoned, soon to be replaced (WinForms), is equally troubling and I do find the GPU support in WPF tantalizing. Hence my ambivalence. Since I haven't learned either tech yet I have a rare opportunity to get a fresh start and not have to face the big "unlearning" curve I've seen people mention in various threads when a WinForms programmer makes the move to WPF. On the other hand, if using WPF will just be too frustrating or have other major negative consequences for an impatient RAD developer like myself, then I'll just stick with WinForms until WPF reaches the same level of support and ease of use. To give you a concrete example into my psychology as a programmer, I used VB and subsequently Delphi to completely avoid altogether the very real pain of coding with MFC, a Windows UI library that many developers suffered through while developing early Windows apps. I have never regretted my luck in avoiding MFC. It would also be comforting to know if Anders Hejlsberg had a hand in the architecture of WPF and/or WinForms, and if there are any disparities in the creative vision and ease of use embodied in either code base. Finally, for the Delphi programmers again, let me know how much "IDE schock" I'm in for when using WPF as opposed to WinForms, especially when it comes to debugger support. Any job market comments updated for 2011 would be appreciated too. -- roschler

    Read the article

  • The right way of using index.html

    - by Jeyekomon
    I have quite a lot of issues I'd like to hear your opinion on, so I hope I'll manage to explain it well enough. I should also note that I'm beginner equipped only with the knowledge of HTML and CSS so although I'm almost sure that there is a simple solution using powerful PHP, it won't help me. Let's say that I have my personal blog on the address example.com/blog.html and there are links to several sub-blogs example.com/blog/math.html, example.com/blog/coding.html etc. So my root folder contains blog.html and blog folder, the blog folder itself contains files math.html and coding.html. First of all, I learned (from Google Webmasters Tools) that for SEO and aesthetical purposes it's good to unify example.com.com and example.com/index.html by adding _rel="canonical"_ attribute into the source of the index.html. Using a couple of other tricks (like linking to ../ and ./) I got rid of the ugly index.html appearing in my web addresses. And now I wonder if this trick can be used not only for the root folder but for any folder? I mean, I would move my blog.html into the blog folder, rename it into the index.html and add rel="canonical" to unify example.com/blog/index.html with example.com/blog/. This trick would change the address of my blog from example.com/blog.html into example.com/blog/. Not finished! I'm also experiencing problems with the google robot indexing my folders. So when I type site:example.com/ into the google search, the link to my folder example.com/blog/ with raw files, icons etc. appears among the other results. I guess there are also other ways how to fix it, but IMHO the change mentioned above would do the trick too - the index.html in the blog folder would preserve the user from viewing the actual raw content of that folder, there would appear only the right link example.com/blog/ in the google search and (I hope that) _rel="canonical"_ would make the second, unwanted link example.com/blog/index.html not to appear in the search results. So my questions are: Is it a good practice to have the index.html file in every subfolder or is it intended to be only in the root folder? Are there any disadvantages or problems that may occur when using the second, "index in every folder" method? Which one of the two ways of structuring the website described above would you prefer?

    Read the article

  • SQL SERVER – WRITELOG – Wait Type – Day 17 of 28

    - by pinaldave
    WRITELOG is one of the most interesting wait types. So far we have seen a lot of different wait types, but this log type is associated with log file which makes it interesting to deal with. From Book On-Line: WRITELOG Occurs while waiting for a log flush to complete. Common operations that cause log flushes are checkpoints and transaction commits. WRITELOG Explanation: This wait type is usually seen in the heavy transactional database. When data is modified, it is written both on the log cache and buffer cache. This wait type occurs when data in the log cache is flushing to the disk. During this time, the session has to wait due to WRITELOG. I have recently seen this wait type’s persistence at my client’s place, where one of the long-running transactions was stopped by the user causing it to roll back. In the future, I will see if I could re-create this situation once again on my machine to validate the relation. Reducing WRITELOG wait: There are several suggestions to reduce this wait stats: Move Transaction Log to Separate Disk from mdf and other files. Avoid cursor-like coding methodology and frequent committing of statements. Find the most active file based on IO stall time based on the script written over here. You can also use fn_virtualfilestats to find IO-related issues using the script mentioned over here. Check the IO-related counters (PhysicalDisk:Avg.Disk Queue Length, PhysicalDisk:Disk Read Bytes/sec and PhysicalDisk :Disk Write Bytes/sec) for additional details. Read about them over here. There are two excellent resources by Paul Randal, I suggest you understand the subject from those videos. The links to videos are here and here. Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All the discussion of Wait Stats in this blog is generic and varies from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

    Read the article

  • Resolving IIS7 HTTP Error 500.19 - Internal Server Error

    - by fatherjack
    LiveJournal Tags: RedGate Tools,SQL Server,Tips and Tricks How To The requested page cannot be accessed because the related configuration data for the page is invalid. As part of my work recently I was moving SQL Monitor from the bespoke XSP web server to be hosted on IIS instead. This didn't go smoothly. I was lucky to be helped by Red Gate's support team (http://twitter.com/kickasssupport). I had SQL Monitor installed and working fine on the XSP site but wanted to move to IIS so I reinstalled the software and chose the IIS option. This wasn't possible as IIS wasn't installed on the server. I went to Control Panel, Windows features and installed IIS and then returned to the SQL Monitor installer. Everything went as planned but when I browsed the site I got a huge error with the message "HTTP Error 500.19 - Internal Server Error The requested page cannot be accessed because the related configuration data for the page is invalid." All links that I could find suggested it was a permissions issue, based on the directory where the config file was stored. I changed this any number of times and also tried the altering its location. Nothing resolved the error. It was only when I was trying the installation again that I read through the details from Red Gate and noted that they referred to ASP settings that I didn't have. Essentially I was seeing this. I had installed IIS using the default settings and that DOESN'T include ASP. When this dawned on me I went back through the windows components installation process and ticked the ASP service within the IIS role. Completing this and going back to the IIS management console I saw something like this; so many more options! When I clicked on the Authentication icon this time I got the option to not only enable Anonymous Authentication but also ASP.NET Impersonation (which is disabled by default). Once I had enabled this the SQL Monitor website worked without error. I think the HTTP Error 500.19 is misleading in this case and at the very least should be able to recognise if the ASP service is installed or not and then to include a hint that it should be. I hope this helps some people and avoids wasting as much of your time as it did mine. Let me know if it helps you.

    Read the article

  • Multiple Monitors

    - by mroberts
    At my workplace .Net developers get pretty much the same equipment. A decent Dell workstation / Desktop, mine is a Dell Precision 390. One dual core 2.40 GHz. Eight GB RAM. Windows 7 Enterprise 64-bit. Two Dell 20.1 Monitors. I'm happy with this.  The machine is about 3 years old but still runs with some decent speed. New developers are getting a Dell workstation with dual quad processors. I just put in a request for myself and three other developers for an upgraded video card and two additional monitors, for a total of four monitors per person.  We suggested this card, BTW, mainly for the cost.  The move from one monitor to two was fantastic (one might even say life (or work) changing) and truly did increase productivity. Now what about going from 2 monitors to 4?  I'm sure the change is not as dramatic as one to two, but I can't help but to think four monitors is better than two.  But if four is better than two, should we have asked for six?!? Also what about mixing monitor types?  Right now my monitors are the older square type vs. wide-screen.  It's been rumored that we will be getting monitors out of current stock and they will be 22 inch wide-screens.  I understand this, recession and all.  2-20 inch square monitors with 2-22 inch wide-screen monitors...hmmmmm.  I'm thinking I'd rather get 2 additional 17 inch square monitors to put on each side of my 20's. Also, a question was raised about the layout of four monitors. By default, my thought was I'll just put them all on my desk, kinda in a line. I've heard others say they want to stack them in a 2 x 2 square. BTW, loving multi monitor support in Visual studio 2010! I’d love some comments on your experience with one, two, four, or however many monitors from a developers perspective.

    Read the article

  • Replacing “if”s with your own number system

    - by Michael Williamson
    During our second code retreat at Red Gate, the restriction for one of the sessions was disallowing the use of if statements. That includes other constructs that have the same effect, such as switch statements or loops that will only be executed zero or one times. The idea is to encourage use of polymorphism instead, and see just how far it can be used to get rid of “if”s. The main place where people struggled to get rid of numbers from their implementation of Conway’s Game of Life was the piece of code that decides whether a cell is live or dead in the next generation. For instance, for a cell that’s currently live, the code might look something like this: if (numberOfNeighbours == 2 || numberOfNeighbours == 3) { return CellState.LIVE; } else { return CellState.DEAD; } The problem is that we need to change behaviour depending on the number of neighbours each cell has, but polymorphism only allows us to switch behaviour based on the type of a value. It follows that the solution is to make different numbers have different types: public interface IConwayNumber { IConwayNumber Increment(); CellState LiveCellNextGeneration(); } public class Zero : IConwayNumber { public IConwayNumber Increment() { return new One(); } public CellState LiveCellNextGeneration() { return CellState.DEAD; } } public class One : IConwayNumber { public IConwayNumber Increment() { return new Two(); } public CellState LiveCellNextGeneration() { return CellState.LIVE; } } public class Two : IConwayNumber { public IConwayNumber Increment() { return new ThreeOrMore(); } public CellState LiveCellNextGeneration() { return CellState.LIVE; } } public class ThreeOrMore : IConwayNumber { public IConwayNumber Increment() { return this; } public CellState LiveCellNextGeneration() { return CellState.DEAD; } } In the code that counts the number of neighbours, we use our new number system by starting with Zero and incrementing when we find a neighbour. To choose the next state of the cell, rather than inspecting the number of neighbours, we ask the number of neighbours for the next state directly: return numberOfNeighbours.LiveCellNextGeneration(); And now we have no “if”s! If C# had double-dispatch, or if we used the visitor pattern, we could move the logic for choosing the next cell out of the number classes, which might feel a bit more natural. I suspect that reimplementing the natural numbers is still going to feel about the same amount of crazy though.

    Read the article

  • Oracle SQL Developer is for Oracle Database

    - by thatjeffsmith
    What is Oracle SQL Developer? Well, according to this document on OTN… What is SQL Developer? Date: May 2014 Oracle SQL Developer is the Oracle Database IDE. A free graphical user interface, Oracle SQL Developer allows database users and administrators to do their database tasks in fewer clicks and keystrokes. A productivity tool, SQL Developer’s main objective is to help the end user save time and maximize the return on investment in the Oracle Database technology stack. Ok, sounds pretty straightforward. Where does the confusion lie then? Some People Use SQL Developer to Connect to 3rd Party Databases SQL Developer allows you to register 3rd party database JDBC drivers. The 3rd party being a company OTHER than Oracle that makes a database product. You know who they are (SAP, MSFT, IBM, etc.) Registering 3rd party JDBC drivers in SQL Developer But maybe you don’t understand why we support these types of connections? It’s for one driving reason. To Help You Migrate to Oracle Database Yes, you get a worksheet and a tree to query and browse those systems. But, the real meat and bones there are around our migration projects and our translation scratch editor. At the end of the day, it’s there so you can move your data from say Sybase ASE to Oracle Database. On a side note, the migration technology was previously available in a separate application, the Migration Workbench. The technology and the awesome people behind it were folded into SQL Developer. So when asked what SQL Developer is, I say it’s the Database IDE and the official 3rd party database migration to Oracle platform. So anyways, when you ask for better support for another 3rd party provider, we deliver that support based on that business driver. If another 3rd party database jdbc driver is introduced, it’s because we have a lot of customers migrating from that platform. We’re not adding it to make it easier for you to work with SQL Server on your Mac. But, if you find that useful – that is cool. It’s just not why we’ve got the support for SQL Server connections in SQL Developer.

    Read the article

  • SQL SERVER – 4 Tips for ETL Software IDE Developers

    - by pinaldave
    In a previous blog, I introduced the notion of Semantic Types. To an end-user, a seamlessly integrated semantic typing engine significantly increases the ease of use of an ETL IDE (integrated development environment, or developer studio). This led me to think about other ease-of-use issues I have encountered while building ETL applications. When I get stumped while programming, I find myself asking the variations on these questions: “How do I…?” “Now what?” “Why isn’t this working?” “Why do I have to redo the work I just did?” It seems to me that a good ETL IDE will anticipate these questions and seek to answer them before they are even asked. So here are my tips to help software vendors build developer IDEs that actually make development easier. How do I…? While developing an ETL application, have you ever asked yourself: “How do I set up the connection to my SQL Server database?”,“How do I import my table definitions from Access?”, etc. An easy answer might be “read the manual” but sometimes product manuals are not robust or easily accessible. So, integrating robust how-to instructions directly into your ETLstudio would help users get the information they need at the time they need it. Now what? IDEs in general know where you last clicked or performed an action using an input device such as a keyboard; so they should be able to reasonably predict the design context you are in and suggest the next steps accordingly. Context-sensitive suggestions based on the state of the user’s work will help users move forward in ETL application development. Why isn’t this working? Or why do I have to wait till I compile to be told about a critical design issue? If an ETL IDE is smart enough to signal to users what in their design structures is left to be completed or has been completed incorrectly, then the developer can spend much less time in the designàcompileàerror-correct loop. Just-in-time validation helps users detect and correct programming errors earlier in the ETL development life cycle. Why do I have to redo the work I just did? In ETL development, schemas, transformation rules, connectivity objects, etc., can be reused in various situations. Using mouse-clicks to build and manage libraries of reusable design objects implies that the application development effort should decrease over time and as the library acquires more objects. I met a great company at SQL Pass that is trying to address many of these usability issues. Check them out at www.expressor-software.com. What other ease-of-use suggestions do you have for ETL software vendors? Please post your valuable comments. ?Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Best Practices, Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: ETL

    Read the article

  • [MISC GEEKERY] Lucid Lynx to Come Loaded with Ubuntu One Music Store

    - by Vivek
    Ubuntu 10.04 (code name Lucid Lynx) will come loaded with the Ubuntu One music store. Rhythmbox will have the Ubuntu One music store integrated in it. It’ll also allow users to download purchased music to their local machine. Ubuntu One Music Store Users will be able to access Ubuntu One music store from the sidebar of Rhythmbox. The music store is a web page that opens in the Rhythmbox player. There are albums listed on the home page of the Ubuntu One music store page. Ubuntu One music store is powered by 7digital, which is a leading digital B2B media delivery company based in London and operating globally. Canonical, the company behind Ubuntu, has partnered with 7digital to bring the music store to it’s users, integrating it with Rhythmbox and it’s cloud storage service UbuntuOne which was launched last year. The home screen of the Ubuntu One music store displays popular albums and functionality to browse and search. You can search for Artists, Tracks, Albums, or a combination of all three. Users will also be able to browse the store alphabetically, or based on different music genres. Once you select a specific artist, all their available albums are arranged in a grid. Once an album is selected, you’ll will be able to download specific songs or the whole album. You’ll also be allowed to preview different songs for 60 seconds. You’ll be able to buy tracks using a credit card or with PayPal. The purchased tracks will be visible under Library \ Purchased from Ubuntu One. The downloaded tracks are also synced with your UbuntuOne account. This means that you’ll be able to access your tracks from any where on the web. The default UbuntuOne account comes with 2 GB free storage, however, you can also purchase additional space if you need it.   All the music is in mp3 format which is not supported by default in Ubuntu. However, you can get mp3 playback functionality using GStreamer multimedia framework. Conclusion All in all the Ubuntu One music store is a positive move to enhance the user experience and also increase the popularity of Canonical in bringing Ubuntu closer to regular users. This would also provide Canonical to make some revenue in collaboration with 7digital. Ubuntu One Music Store Wiki Similar Articles Productive Geek Tips Install GIMP 2.7.1 on Lucid Lynx using PPAExaile 0.3.0 is a Music Player for UbuntuHow to install Spotify in Ubuntu 9.10 using WineAdding extra Repositories on UbuntuSpeed Up Amarok With Large Music Collections TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi LocPDF is a Visual PDF Search Tool

    Read the article

  • A couple of nice features when using OracleTextSearch

    - by kyle.hatlestad
    If you have your UCM/URM instance configured to use the Oracle 11g database as the search engine, you can be using OracleTextSearch as the search definition. OracleTextSearch uses the advanced features of Oracle Text for indexing and searching. This includes the ability to specify metadata fields to be optimized for the search index, fast rebuilding, and index optimization. If you are on 10g of UCM, then you'll need to load the OracleTextSearch component that is available in the CS10gR35UpdateBundle component on the support site (patch #6907073). If you are on 11g, no component is needed. Then you specify the search indexer name with the configuration flag of SearchIndexerEngineName=OracleTextSearch. Please see the docs for other configuration settings and setup instructions. So I thought I would highlight a couple of other unique features available with OracleTextSearch. The first is the Drill Down feature. This feature allows you to specify specific metadata fields that will break down the results of that field based on the total results. So in the above graphic, you can see how it broke down the extensions and gives a count for each. Then you just need to click on that link to then drill into that result. This setting is perfect for option list fields and ones with a distinct set of values possible. By default, it will use the fields Type, Security Group, and Account (if enabled). But you can also specify your own fields. In 10g, you can use the following configuration entry: DrillDownFields=xWebsiteObjectType,dExtension,dSecurityGroup,dDocType And in 11g, you can specify it through the Configuration Manager applet. Simply click on the Advanced Search Design, highlight the field to filter, click Edit, and check 'Is a filter category'. The other feature you get with OracleTextSearch are search snippets. These snippets show the occurrence of the search term in context of their usage. This is very similar to how Google displays its results. If you are on 10g, this is enabled by default. If you are on 11g, you need to turn on the feature. The following configuration entry will enable it: OracleTextDisableSearchSnippet=false Once enabled, you can add the snippets to your search results. Go to Change View -> Customize and add a new search result view. In the Available Fields in the Special section, select Snippet and move it to the Main or Additional Information. If you want to include the snippets with the Classic results, you can add the idoc variable of <$srfDocSnippet$> to display them. One caveat is that this can effect search performance on large collections. So plan the infrastructure accordingly.

    Read the article

  • Resources such as libraries, engines and frameworks to make Javacript-based MMORTS? [closed]

    - by hhh
    I am looking for resources outlined to make a MMORTS with Javascript as the client-side, probably just a simple canvas for the frontend. The guy in the video here mentions that JavaScript is one of the most misunderstood language -- and I do believe that. I think one can make quite cool games with it in the future. So I am now proactively looking for resources and perhaps some ideas. My first idea contained Node.js, C and NetBSD/bozohttpd (or the-4-7-chars' *ix-thing with green-logo -thing, move the q here) but I acknowledge my beginner -style approach -- this issue is broad and not only for one person to make it all-the-time-improved project! So I think perfect for community to tinker. Some games and examples possibly easy to make into MMORTS BrowserQuest here under MPL 2.0 and its content licensed under CC-BY-SA 3.0 (source here) [proprietary] LoU here and built with JS/Qooxdoo/c#/Windows-Server/ISS/etc, source. MY ANSWER BEGINS HERE TO BE MOVED BELOW, REQUIRING RE-OPENING. PLEASE, VOTE TO OPEN IT -- HELP US TO TINKER! My answer Generic Is there an MMO-related research body? Although about Android, certain things also appropriate with JS -game: Are there any 2D gaming libraries/frameworks/engines for Android? Why is it so hard to develop a MMO? Browser based MMO Architecture MMO architecture - Highly Scalable with Reporting capabilities What are the Elements of an MMO Game? Is this the right architecture for our MMORPG mobile game? Looking for architectures to develop massive multiplayer game server Information on seamless MMO server architecture Game-mechanics (search) Question sounding like about LoU: What are the different ways to balance an online multiplayer game where user spend different amounts of time online? Building an instance system What are the different ways to balance an online multiplayer game where user spend different amounts of time online? Hosting is it possible to make a MMO starting with scalable hosting? Should I keep login server apart from game server? MMO techniques, algorithms and resources for keeping bandwidth low? MMO Proxy Server Javascript and Client-based things What do I need to do a MMORTS in JavaScript with small amount of Developers? How to update the monsters in my MMO server using Node.js and Socket.IO Are there any good html 5 mmo design tutorials? Networking Loadbalancing Questions Something about TCP, routers, NAT, etc: How do I start writing an MMO game server? Who does the AI calculations in an MMO? They need someone more knowledgable to work with, a lot of cases where the same words mean different things. Data Structures What data structure should I use for a Diablo/WoW-style talent tree? Game Engine Need an engine for MMO mockup Helper sites http://www.gamedev.net/page/index.html

    Read the article

  • SQL SERVER – Implementing IF … THEN in SQL SERVER with CASE Statements

    - by Pinal Dave
    Here is the question I received the other day in email. “I have business logic in my .net code and we use lots of IF … ELSE logic in our code. I want to move the logic to Stored Procedure. How do I convert the logic of the IF…ELSE to T-SQL. Please help.” I have previously received this answer few times. As data grows the performance problems grows more as well. Here is the how you can convert the logic of IF…ELSE in to CASE statement of SQL Server. Here are few of the examples: Example 1: If you are logic is as following: IF -1 < 1 THEN ‘TRUE’ ELSE ‘FALSE’ You can just use CASE statement as follows: -- SQL Server 2008 and earlier version solution SELECT CASE WHEN -1 < 1 THEN 'TRUE' ELSE 'FALSE' END AS Result GO -- SQL Server 2012 solution SELECT IIF ( -1 < 1, 'TRUE', 'FALSE' ) AS Result; GO If you are interested further about how IIF of SQL Server 2012 works read the blog post which I have written earlier this year . Well, in our example the condition which we have used is pretty simple but in the real world the logic can very complex. Let us see two different methods of how we an do CASE statement when we have logic based on the column of the table. Example 2: If you are logic is as following: IF BusinessEntityID < 10 THEN FirstName ELSE IF BusinessEntityID > 10 THEN PersonType FROM Person.Person p You can convert the same in the T-SQL as follows: SELECT CASE WHEN BusinessEntityID < 10 THEN FirstName WHEN BusinessEntityID > 10 THEN PersonType END AS Col, BusinessEntityID, Title, PersonType FROM Person.Person p However, if your logic is based on multiple column and conditions are complicated, you can follow the example 3. Example 3: If you are logic is as following: IF BusinessEntityID < 10 THEN FirstName ELSE IF BusinessEntityID > 10 AND Title IS NOT NULL THEN PersonType ELSE IF Title = 'Mr.' THEN 'Mister' ELSE 'No Idea' FROM Person.Person p You can convert the same in the T-SQL as follows: SELECT CASE WHEN BusinessEntityID < 10 THEN FirstName WHEN BusinessEntityID > 10 AND Title IS NOT NULL THEN PersonType WHEN Title = 'Mr.' THEN 'Mister' ELSE 'No Idea' END AS Col, BusinessEntityID, Title, PersonType FROM Person.Person p I hope this solution is good enough to convert the IF…ELSE logic to CASE Statement in SQL Server. Let me know if you need further information about the same. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Function, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

  • SQLAuthority News – Book Review – Beginning T-SQL 2008 by Kathi Kellenberger

    - by pinaldave
    Beginning T-SQL 2008 by Kathi Kellenberger Amazon Link Detail Review: Beginning T-SQL 2008 is one of the best books on the market if you are just beginning to work with Microsoft SQL, or have a little bit of experience and need to learn more quickly. Each chapter of the book introduces a new subject, and builds upon topics covered in previous chapters.  The author of the book, Kathi Kellenberger understands that you need to form a solid foundation of knowledge before moving on to new topics, and sets up each subject nicely.  Because the chapters move in an orderly progression, you continue to use skills you learned earlier. One of the best features of Beginning T-SQL 2008 is that each chapter has multiple examples and exercises.  Many books introduce a topic and then never go back to it.  This book gives enough examples that you will be familiar with the subject when you come across it in real life.  The exercises at the end of the chapter mean that you will be using the skills you learned – and there is no better way to cement a subject in your brain. The book also includes discussions of the common errors that programmers will come across, how to avoid them, and how to fix them if they happen.  Ms. Kellenberger understands that not only do mistakes happen, but they are bound to happen if you aren’t trained properly.  Mistakes are part of the learning process! The book begins by discussions relational theory, so that programmers will understand the way T-SQL works from the ground up.  It also walks readers through writing accurate queries, combining set-based and procedural processing, embedding logic in stored functions, and so much more. Overall, the main goal of Beginning T-SQL 2008 is to introduce novices to SQL programming, and quickly familiarize them with the basics of running the program.  The book is written with the idea that readers will not know any of the technical terms or vocabulary.  However, if you are a little more familiar with SQL and looking to become better, you will still find this book very helpful. Ratting: 4.5+ Stars Summary: I must recommend Beginning T-SQL 2008 highly enough.  If you are going to buy any beginners guide to Transect-SQL, this is the one you should spend your money on.  You can save yourself a lot of time and effort later by using this very affordable manual to learn the basics, which will allow you to become an expert much faster. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Book Review, SQLAuthority News, T SQL, Technology

    Read the article

  • Best of "The Moth" 2010

    - by Daniel Moth
    It is the time again (like in 2004, 2005, 2006, 2007, 2008, 2009) to look back at my blog for the past year and identify areas of interest that seem to be more prominent than others. After doing so, representative posts follow in my top 5 list (in random order). 1. This was the year where I had to move for the first time since 2004 my blog engine (blogger.com –> dasBlog), host provider (zen –> godaddy), web server technology and OS (apache on Linux –> IIS on Windows Server). My goal was not to break any permalinks or the look and feel of this website. A series of posts covered how I achieved that goal, culminating in a tool for others to use if they wanted to do the same: Tool to convert blogger.com content to dasBlog. Going forward I aim to be sharing more small code utilities like that one… 2. At work I am known for being fairly responsive on email, and more importantly never dropping email balls on the floor. This is due to my email processing system, which I shared here: Processing Email in Outlook. I will be sharing more tips with regards to making the best of the Office products. 3. There is no doubt in my mind that this is the year people will remember as the one where Microsoft finally fights back in the mobile space. Even though the new platform means my Windows Mobile book sales will dwindle :-), I am ecstatic about Windows Phone 7 both as a consumer and as a developer. On the release day, to get you started I shared the top 10 Windows Phone 7 developer resources. I will be sharing my tips from my experience in writing code for and consuming this new platform… 4. For my HPC developer friends using Visual Studio, I shared Slides and code for MPI Cluster Debugger and also gave you all the links you need for getting started with Dryad and DryadLINQ from MSR. Expect more from me on cluster development in the coming year… 5. Still in the HPC space, but actually also in the game and even mainstream development, the big disruption and opportunity comes in the form of GPGPU and, on the Microsoft platform, (currently) DirectCompute. Expect more from me on gpgpu development in the coming year… Subscribe via the link on the left to stay tuned for 2011… I wish you a very Happy New Year (with whatever definition of happiness works for you)! Comments about this post welcome at the original blog.

    Read the article

  • Four Emerging Payment Stories

    - by David Dorf
    The world of alternate payments has been moving fast of late.  Innovation in this area will help both consumers and retailers, but probably hurt the banks (at least that's the plan).  Here are four recent news items in this area: Dwolla, a start-up in Iowa, is trying to make credit cards obsolete.  Twelve guys in Des Moines are using $1.3M they raised to allow businesses to skip the credit card networks and avoid the fees.  Today they move about $1M a day across their network with an average transaction size of $500. Instead of charging merchants 2.9% plus $.30 per transaction, Dwolla charges a quarter -- yep, that coin featuring George Washington. Dwolla (Web + Dollar = Dwolla) avoids the credit networks and connects directly to bank accounts using the bank's ACH network.  They are signing up banks and merchants targeting both B2B and C2B as well as P2P payments.  They leverage social networks to notify people they have a money transfer, and also have a mobile app that uses GPS location. However, all is not rosy.  There have been complaints about unexpected chargebacks and with debit fees being reduced by the big banks, the need is not as pronounced.  The big banks are working on their own network called clearXchange that could provide stiff competition. VeriFone just bought European payment processor Point for around $1B.  By itself this would not have caught my attention except for the fact that VeriFone also announced the acquisition of GlobalBay earlier this month.  In addition to their core business of selling stand-beside payment terminals, with GlobalBay they get employee-operated mobile selling tools and with Point they get a very big payment processing platform. MasterCard and Intel announced a partnership around payments, starting with PayPass, MasterCard's new payment technology.  Intel will lend its expertise to add additional levels of security, which seems to be the biggest barrier for consumer adoption.  Everyone is scrambling to get their piece of cash transactions, which still represents 85% of all transactions. Apple was awarded another mobile payment patent further cementing the rumors that the iPhone 5 will support NFC payments.  As usual, Apple is upsetting the apple cart (sorry) by moving control of key data from the carriers to Apple.  With Apple's vast number of iTunes accounts, they have a ready-made customer base to use the payment infrastructure, which I bet will slowly transition people away from credit cards and toward cheaper ACH.  Gary Schwartz explains the three step process Apple is taking to become a payment processor. Below is a picture I drew representing payments in the retail industry. There's certainly a lot of innovation happening.

    Read the article

< Previous Page | 303 304 305 306 307 308 309 310 311 312 313 314  | Next Page >