Search Results

Search found 8782 results on 352 pages for 'pc'.

Page 307/352 | < Previous Page | 303 304 305 306 307 308 309 310 311 312 313 314  | Next Page >

• network will not work properly after having run TCP optimizer, but safe mode settings work perfectly. how to restore?

  - by michele

  I was experiencing some issues with my connection while playing online and I tried to optimize it by running TCP optimizer on my PC (Windows 7 64bit professional). I thought maybe the situation could improve. but it didn't. actually, I now get an extremely slow page loading time, probably due to a very low RWIN value of 1024. I understand that Windows 7 has a system to automatically adjust the RWIN value when needed. The setting from netsh is "normal" so I guess something else must be wrong. I tried every automatic tool out there to restore Windows' default values, but I had no success. I currently have what should be labeled as "default values" for everything TCP Optimizer initially changed, but the problem persists. The thing is, I just found out that running Windows in safe mode SOLVES the problem completely. The problem is that as soon as I reboot, I get the same issue all over again. So my question is: is there a way to use SAFE MODE network settings in NORMAL mode?

  Read the article

• pxe boot dos 7.x / 8.x on modern mainboard without floppy controller

  - by GitaarLAB

  How to pxe boot MS DOS 7.x / 8.x on a modern pc (mainboard without floppy controller) without using an external usb floppy drive? MS DOS 6.22 and earlier or other flavors pxe boot just fine on floppy-less hardware. But DOS 7.x and 8.x renders an error on boot: "Type the name of the Command Interpreter (e.g., C:\WINDOWS\COMMAND.COM) I read somewhere during research this was a rather unknown error, that started to become more common due to the advent of floppy-controller-less hardware. On some hardware (bios dependent) one could plug a usb-floppy-drive in the computer before booting (but that MIGHT also require it to be a "golden floppy drive" (as they where called back then). From a russian site (I read about a year ago and cannot find the hyperlink) MS-Dos versions 6.22 did some-kind of floppy-drive reset during initialization and since it couldn't connect to the floppy-host thus the error. How can I resolve this (without a physical external usb floppy)? Might there be some kind of virtual floppy-driver that could resolve this (for example to be loaded before the dos image loads)? Or could someone point me into the right direction (maybe even a hex-address and some further explanation or something)? I'm using syslinux by the way.

  Read the article

• Autologin 2 Windows users OR Login another user from the desktop

  - by fpdragon

  I'm using two windows users on my HTPC at the same time. One is just for watching videos and one for administration via remote. This setup is quite ideal for me since windows can handle multiple concurrent logins and the win "rdp concurrent hack" (Google). The problem is, I want both users to be logged in automatically when the pc was started. It shall be possible to watch tv and also the admin user shall be automatically logged in to start my scripts and other tasks, even if I haven't logged in via remote desktop manually. Later, when I want to admin my htpc I can just rdp connect the admin user without interrupting the video playback on the actual HTPC's screen and check my cleanup tasks, downloads, ... witch already executed for this admin user. But right now I found no solution to automatically login user A from a user B desktop and I also found no solution to autologin both users immediately at startup. As a workaround I have to fire up my other notebook machine and login one time with the remote user via rdp. From this time on the remote admin user is running concurrent with the main user in the background of the machine. The other workaround would be... after startup switch user from main user to admin user and then back again. But that also requires manual steps. I'm on a Windows 8 System right now but all infos for Win7 or XP would be also interesting. thanks a lot for all ideas. PS: just to prevent useless posts... don't tell me that only one user can be logged in to windows. ;)

  Read the article

• Looking for Remote Control that works with everything (even Windows 7 Media Center)

  - by T Reddy

  Using my Google-Fu, it seems that the most basic of things one gets with any DVR is the remote control. Had I known it would be difficult just to get a consumer IR receiver for Windows 7 I may not have bothered to build an HTPC. But too late, I already have the HTPC ready to go (minus the CETON card...) So I'm moving away from TiVo, I hate paying the monthly fees and my box is ancient. I'm looking for these solutions to my HTCP setup...I want to: Switch audio from HDMI to SPDIF via the remote control (i.e., switch from TV to Receiver) (as a side note, the built-in audio on the mobo has software to do this). Pressing the volume button on the remote will always change the TV's volume (or the Receiver's if possible) and NOT the PC's volume. The remote/receiver works well around 25 feet. Bonus if the IR Receiver can work with my existing TiVo remote (or other remotes laying around the house) I read a review of the Bluetooth TiVo remote...it sounds promising...but I'm not sure if it is great for Windows 7 HTPC?

  Read the article

• Issues regarding internet connectivity

  - by andySF

  Hello. My problem started when Yahoo Messenger stopped connecting. I've tried to see if Internet Explorer was working but will not load any page. The diagnostics of Internet Explorer says that is something wrong with my dns(using just ip of google or yahoo or my local webserver was not working). I use Windows 7 and at the moment i've had Internet Explorer 8 and after a lot of failing updates to ie9 I've successfully install the Romanian version of IE9(now i have ie8 after a system restore). Then I installed the service pack 1. I've done a lot of things and I will try to enumerate them, but my problem persists. Settings from Yahoo Messenger and Internet Explorer are OK. I've try to reset winsock and ip from netsh. I've scanned my pc with spybot, mallwarebytes, Trojan Remover(simplysup), Loaris Trojan Remover, Avast, Nod32, Kaspersky, Bitdefender,alot of registry cleaner including CCleaner and maybe others that I cannot remember now. I reset the registry permissions using subinacl. At a moment my files permissions was set jut to "trusted installer" and I've put the permission back to files and folders using the model of other windows 7 machine. I have try so many things that now i'm stuck in a loop using different security tools to check for problems. Oh, and my virtual machines are working just fine.(I'm using VirtualBox) Please Help. PS, Reinstalling Windows is not an option. Thank you!

  Read the article

• Supermicro X8SIL-F with Enermax Modu82+ 625W PSU booting issue

  - by Richard Whitman

  I am assembling a custom PC. The configuration is below: Motherboard: Supermicro X8SIL-F Processor: Intel Xeon 3430 Power Supply: Enermax Modu82+ 625W. Memory: Kingston KVR1333D3LQ8R9S/8GEC 8GBx1 installed in DimmA1 This power switch: Frozen CPU switch When I turn on the PSU, the motherboard tries to start itself before I even push the power switch. The following happens: The CPU fan rotates like once or twice, and then stops. After 1-2 seconds, the CPU fan tries to rotate again and stops after about one or two rotations. Finally, after another 1-2 seconds, it again starts and this time it rotates for about 3-4 seconds before stopping. If I pull out the Power switch, and turn on the PSU, again the MB turns on itself and the following happens: The CPU fan rotates like once or twice, and then stops. After 1-2 seconds, the CPU fan tries to rotate again and stops after about one or two rotations. Finally, after another 1-2 seconds, it again starts and the system boots properly I am sure there is nothing wrong with any of the components, because I have two sets of identical components (2 MBs, 2 CPUs, 2 PSUs, 2 switches and so on). And both of the systems show the same symptoms. Why is the MB booting up by itself? Why does it fail to boot when the Power Switch is installed? Is something wrong with the type of Power Switch I am using? PS: the power switch is installed correctly, I have double checked the MB manual to make sure its connecting the right pins.

  Read the article

• Safemode Startup Issues on Vista 64 Bit

  - by GnrlBzik

  Before i ask the question, let me point out that this is not a hardware issue. I have a clean install of vista on another hd that runs on same hardware, i am pretty sure its a corruption of a drive or a file, i presume it might be video driver. When windows wont start via normal boot i just get black screen after initial load up of os, so i boot into savemode, I end up having black screen with a mouse pointer visible, after initial load of os. The shut down button is responsive. Of course, I can install clean copy of os, and prior to that can retrieve all other files that i need by accessing hd itself, i can restore my pc from my external back up as well. Although i have all these options, i was wondering if there anything else i can do that can help me fix this issue. In save mode, it looks like I am capable of logging in after initial load of os, even though i cant see the process it self, i do see the mouse pointer. By visual memory i navigated to password field, and entered my password, hit enter, I get the loading mouse pointer, nothing really changes, same black screen and mouse pointer, but when i tried to access task manager for a second i got a safemode watermark at all four corners. Any help would be appriciated. Thank you in advance.

  Read the article

• TFTP Timing Out on Ubuntu VM

  - by valsidalv

  I'm running a Windows 7 PC with VMware installed which has my Ubuntu (10.04 Lucid Lynx). I recently installed a DHCP server and TFTP (Xinet tftpd) using these instructions. I've mapped a network drive so that my Windows has access to all the files in my VM through a 192.x.x.x IP address. I'm trying to throw some custom firmware onto a router. The router has its own built-in TFTP utility that will download the image. It successfully manages to do everything but it is slow because it writes it to flash memory. There is another method that is much quicker because it writes to RAM directly but it must use the TFTP server in Ubuntu. The issue I'm facing is that the Ubuntu TFTP transfer seems to be timing out. The transfer starts but never goes past ~60%. Here's my /etc/xinetd.d/tftp file (similar to a known working config): service tftp { protocol = udp port = 69 socket_type = dgram wait = yes user = nobody server = /usr/sbin/in.tftpd server_args = -s /home/user/tftp/ disable = no cps = 300 2 per_source = 60 } I've done some searching but can't find any parameters for this file to control timeout time or number of retries. The last two arguments (cps, per_source) and completely alien to me (can anyone explain). I have a few possible solutions but the easiest would be to get this TFTP server working. Can anyone help? Either with a timeout configuration or maybe even recommend a different TFTP server? Thanks!

  Read the article

• Need advise for choosing software\hardware for virtualization.

  - by Anatoly

  Currently we have these servers : Windows SBS 2003 premium on IBM X266 double Xeon F43, 2GB ram. DC, exchange (70 users), Mssql. Windows 2003 R2 32bit on IBM x3400 with double XEON E5310 and 4GB ram. Terminal server (40+ users), ERP application based on uniPaaS platform from Magicsoftware, and Pervasive sql. Ubuntu 8.04 (simple pc box) with squid proxy, GLPI system and PHPBB3 forum for internal use. Recently number of concurrent users on Terminal server passed 40 users in rush hours and it gets stuck frequently. Therefore we need an upgrade. I think about transfer all physical servers to virtual servers based on cluster of 2 physical servers for reducing downtime. I think we will grow till 50-60 concurrent terminal users in rush hours. I also plan to virtualize 10-15 Win XP/7 workstation (office,ERP etc), and there is a little probability for Asterisk\Hylafax for 100 users (if it possible on same VM). Also we need NAS storage for 2-3TB. What hardware upgrade/purchase we need for complete this task? Which VM solution is preferable VmWare or Hyper-V? What backup software should we choose? Acronis or something another? Thank you in advance.

  Read the article

• Home Sharing and Remote on iTunes causing firewall nags

  - by BoltClock

  It seems that enabling Home Sharing and/or hooking up my iPhone's Remote to iTunes causes Mac OS X Snow Leopard's firewall to freak out and keep nagging every time I launch iTunes to ask if I'd like it to accept incoming connections. If I turn off Home Sharing and forget all Remotes, the nag dialog no longer comes up. I could also disable the firewall, but I think that's a silly thing to do. iTunes is already in the firewall whitelist, so the only thing I know that could cause Mac OS X to nag is a bad application bundle code signature. I checked with this Terminal command: $ codesign -vvv /Applications/iTunes.app/ And sure enough, this is what it outputs: /Applications/iTunes.app/: a sealed resource is missing or invalid /Applications/iTunes.app/Contents/Resources/English.lproj/AutofillSettings.nib/objects.xib: resource added /Applications/iTunes.app/Contents/Resources/English.lproj/iTunesDJSettings.nib/objects.xib: resource added /Applications/iTunes.app/Contents/Resources/English.lproj/MobilePhonePrefs.nib/objects.xib: resource added /Applications/iTunes.app/Contents/Resources/English.lproj/MobilePhoneSetup.nib/objects.xib: resource added /Applications/iTunes.app/Contents/Resources/English.lproj/UniversalAccess.nib/objects.xib: resource added I've tried reinstalling iTunes as suggested by this answer, but Mac OS X still nags about incoming connections and the exact same output is generated when I run the above command again. On my PC, Windows Firewall has never nagged whenever I turn on Home Sharing and hook up Remote on my iPhone. Both computers use iTunes 9.2.1. My Mac runs Mac OS X 10.6.4. Is there anything special I need to do that I might have missed? Or how do I resolve the issue? EDIT: I've updated to iTunes 10, but the nags on my Mac are still there and only go away if I turn off Home Sharing and Remote. EDIT 2: I've updated to Remote 2.0 on my iPhone, but the firewall nags are persisting. Has anyone else had this firewall issue at all?

  Read the article

• Computer Freezes with "Bugcheck 0" on Windows 7. How do I figure out why?

  - by George Stocker

  After about 10 minutes of running, my computer will hang, exhibiting the following symptoms: Both monitors act as if there is no image being sent to them (on, but blacked out) The CAPS Lock key on the keyboard will not respond. The computer appears to still be running: CPU Fan is whirring. When I reboot, Windows says "The previous shutdown was unexpected." I've enabled the 'don't automatically restart' on an error, and asked the computer to make a memory dump whenever it crashes, but it hasn't done either. The problem is that there's no bugcheck for me to go off of, so there's no way for me to determine what the cause is (I think). Here are my system specs: Intel Core 2 Duo E6750 Gigabyte P35C-DS3R w/ 4.00 GB (DDR2 Ram) Nvidia 8800 GT Windows 7 I've tried running the Windows Memory checker, but the system also freezes when using that after about 10 minutes as well. How can I diagnose the problem with no bugcheck and no ability to run a memory checker? Update Running Memtest86 also causes the computer to crash (looks like it doesn't make it through a full pass - it was only running for about 10 minutes when the PC stopped responding).

  Read the article

• Having Trouble Ripping Some CD's

  - by James

  Hi, When I buy CD's I tend to rip them to FLAC right away. When ripping I use Foobar2000 or Exact Audio Copy and enable secure ripping which uses error correction. Recently I bought a 2 CD compilation album brand new but when I tried to rip the second CD on my laptop using Foobar2000 it struggled with the last 2 tracks and was unable to finish. EAC was also unable to get an accurate rip and reports read errors. Ripping in fast mode results in audible errors in the output track. I have tried another computer and having similar problems. I cannot see any damage to the disc and it has not been dropped or anything. The weird thing is that I had similar problems with a different album and different PC a while back. This other CD was a compilation disk so it was also right up to the CD capacity limit and again it was the last few tracks that would not rip. Dozens of other discs have ripped fine So I am wondering if the CD is simply defective, or whether it is something else. How common are defective CD's? Do some CD drives struggle with CD's of this capacity? Or Is this some kind of copy protection? I'm thinking of asking Amazon for a replacement but it would be annoying if I get the same problem again.

  Read the article

• Is this normal or does my AVG anitivirus have a virus? [closed]

  - by user390480

  Possible Duplicate: Computer is infected by a virus or a malware, what do I do now? [Note: This is not a duplicate and should not be closed as a duplicate as this is nothing like the other question. I am not asking if I have a virus, nor am I asking "what do I do now". I know that I have a virus and I know what to do. However, I am asking if these are normal AVG ads or if it has been taken over.] My Windows XP PC started acting strange and I am right now actually in Linux running off of a USB drive. I am running Avast under Linux and it has discovered some viruses on my XP drive. Some of the strange things happening in XP were: I could not get to Google.com My Hosts file was set to hidden and read only My Hosts file had an entry of ::1 And AVG had ads in it I've never seen before. Maybe it is normal but I Binged for AVG anti-virus and become.com but found no information. (The red lines and question mark are by me) Any thoughts?

  Read the article

• How can I wipe my iPod classic and fix any bad sectors on the hard drive without killing it?

  - by Sam Meldrum

  My iPod never finishes syncing and only syncs audio, not pictures or video. Any ideas as to how I can fix it? My iPod classic 160GB worked well for a couple of years. I used to sync a lot of photos at full resolution to it, but this recently stopped working after I moved to Windows 7. iTunes is on latest version - 9.1.1.12 iPod software is up to date - 1.1.2 Windows 7 is fully up to date and patched The symptoms are that the iPod will start to sync, all audio (music and podcasts will sync successfully) but the syncing will then just appear to continue - itunes message: Syncing iPod. Do not Disconnect. This sync never completes - I have left it trying for days. I have tried resetting the iPod using the Restore button, whereupon it restarts sync from default options and again will sync audio, but nothing else. I suspect that something has gone wrong on the hard-drive - either a bad sector or some corrupt data. Is there a process I can go through to fix this? E.g. SpinRite or a format? If so how do I go about formatting an iPod and will it be recognised as an iPod after format and work as normal? Any advice on what to try next much appreciated? Update I have eliminated problems with the files, PC or iTunes as they sync fine to other iPods. I have also eliminated the cable by trying different cables which work with other iPods. What I'd really like to know is if there is any way to more fundamentally wipe the iPod safely, attempt to repair any bad sectors on the hard drive and then start from scratch. Anyone ever managed this?

  Read the article

• Hyper-V: Dedicated NIC for Guests VMs

  - by TheLizardKing

  I have two NIC cards and created a private virtual network for my virtual machines and unchecked "Allow management operating system to share this network adapter" which basically turns my Guest NIC into this sorta shell of a NIC card on the host machine and the only thing checked in it's properties is "Microsoft Virtual Network Switch Protocol" which I am fine with. Everything works and everything is connected. My issue is that for some reason my guest (Ubuntu Server with legacy network drivers) is not talking properly to my DHCP server. Specifically my DHCP server reserves the guest's IP address using it's MAC address but the guest isn't picking it up. It's picking up any old IP it can get and I can't even ping the hostname from another PC on the network but it pings fine if I use the IP. I see the guest showing up in my DHCP table but I can't get the reservation to stick. Is there some reason it's only partially communicating with my DHCP server? Pinging it's hostname on itself reveals it's using 127.0.0.1 instead of it's network IP. Is this an issue with the legacy drivers used in Hyper-V?

  Read the article

• Is having a [high-end] video card important on a server?

  - by Patrick

  My application is quite interactive application with lots of colors and drag-and-drop functionality, but no fancy 3D-stuff or animations or video, so I only used plain GDI (no GDI Plus, No DirectX). In the past my applications ran in desktops or laptops, and I suggested my customers to invest in a decent video card, with: a minimum resolution of 1280x1024 a minimum color depth of 24 pixels X Megabytes of memory on the video card Now my users are switching more and more to terminal servers, therefore my question: What is the importance of a video card on a terminal server? Is a video card needed anyway on the terminal server? If it is, is the resolution of the remote desktop client limited to the resolutions supported by the video card on the server? Can the choice of a video card in the server influence the performance of the applications running on the terminal server (but shown on a desktop PC)? If I start to make use of graphical libraries (like Qt) or things like DirectX, will this then have an influence on the choice of video card on the terminal server? Are calculations in that case 'offloaded' to the video card? Even on the terminal server? Thanks.

  Read the article

• Ubuntu 12.04/12.10 can't detect windows or any other partitions(Asus z77 UEFI BIOS)

  - by user971155

  I've recently completed tinkering my new pc(motherboard ASUS z77 with UEFI BIOS) and unfortunately not everything works quite well. After installing windows 7 ultimate on a single primary partition(SATA drive) I decided to allocate one more logical partition for additional needs. When I tried doing it with the manager - it said that it couldn't allocate requested size even though I certainly asked for much less than it was available. I thought that it might have been a windows issue and proceded to installing Ubuntu 12.10 x64. When the graphical interface loaded it showed me a message stating that it can't find any other operating system on the drive. When I used custom partioning option it showed me none of my current partions(including that with windows). However, when I boot with "Try Ubuntu" feature it does find them ! I find it weird though. Here's what the console present me with: ubuntu@ubuntu:~$ sudo os-prober /dev/sda1:Windows 7 (loader):Windows:chain ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 640.1 GB, 640135028736 bytes 255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00072b98 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 100020223 49906688 7 HPFS/NTFS/exFAT /dev/sda3 100022270 1250263039 575120385 5 Extended /dev/sda4 566669312 1250263039 341796864 83 Linux I also tried creating partitions from disk utility which results in error: , Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/sda, start=51211402240, size=1923000000, type=0x83 Entering MS-DOS parser (offset=0, size=640135028736) MSDOS_MAGIC found looking at part 0 (offset 1048576, size 104857600, type 0x07) new part entry looking at part 1 (offset 105906176, size 51104448512, type 0x07) new part entry looking at part 2 (offset 51211402240, size 588923274240, type 0x05) Entering MS-DOS extended parser (offset=51211402240, size=588923274240) readfrom = 51211402240 MSDOS_MAGIC found Exiting MS-DOS extended parser looking at part 3 (offset 290134687744, size 349999988736, type 0x83) new part entry Exiting MS-DOS parser MSDOS partition table detected containing partition table scheme = 1 got it Error: Can't have overlapping partitions. ped_disk_new() failed Here's what I get when I try to install the system i.stack.imgur.com/pjlb9.png, i.stack.imgur.com/g1lXN.png P.S. It's strange that I even can't create any more partitions neither with disk-utility nor with windows 7 native tools

  Read the article

• DPMS does not work: the monitor is not switched off

  - by bortzmeyer

  I have a monitor which was properly switched off by my Debian PC when unused. I attached it to another machine and, this times, it is never switched off. In /etc/X11/xorg.conf, I have: Section "Monitor" Identifier "Generic Monitor" Option "DPMS" It is recognized when X11 starts: (II) Loading extension DPMS ... (II) VESA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display ... (**) Option "dpms" (**) VESA(0): DPMS enabled The operating system is Debian stable "lenny". The graphics card is: 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrate d Graphics Controller (rev 02) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device 2a6f Flags: bus master, fast devsel, latency 0, IRQ 5 Memory at fe900000 (32-bit, non-prefetchable) [size=512K] I/O ports at b080 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at fe800000 (32-bit, non-prefetchable) [size=1M] Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-Capabilities: [d0] Power Management version 2 X11 is: X.Org X Server 1.4.2 Release Date: 11 June 2008 X Protocol Version 11, Revision 0 Build Operating System: Linux Debian (xorg-server 2:1.4.2-10.lenny2) Current Operating System: Linux ludwigVII 2.6.26-2-686 #1 SMP Sun Jun 21 04:57:3 8 UTC 2009 i686 Build Date: 08 June 2009 09:12:57AM

  Read the article

• Recommend a free temperature-monitoring utility for cores + video card, on Vista?

  - by smci

  Looking for your recommendations for a free temperature-monitoring utility, for my PC (Core 2) and graphics card for Vista. (Question reposted with the hyperlinks now I have 10 reputation). I don't want all the geeky details, I don't overclock, I don't see the need to mess with my fan speeds or motherboard settings, I just want something fairly basic to help with basic troubleshooting of intermittent overheats on video card and/or mobo: must run on Windows Vista (yes, don't laugh). ideally displays temperature when minimized to toolbar, and/or: automatically alerts me when temperature on either core or the video card exceeds a threshold ideally measures temperature of video card and system as well, not just the cores. HDD temperature is not necessary I think. logging is nice, graphs are also nice portability to Linux and Mac is nice Apparently Everest is the best paid option, but I'm not prepared to spend $40. I found the following free options, but no head-to-head at-a-glance comparison: CoreTemp (only does cores, not video card?) Open Hardware Monitor (nice graphs, displays when minimized to toolbar, no alerts) RealTemp (has alerts, works minimized, lightweight install) HWMonitor (no alerts, CNET: "[free version is] simple but effective") from CPUID CPUCool (not free: 21-day trialware, then $18) SpeedFan from Almico (too geeky, detail overload; CNET: "most users won't be able to make head or tail of the data this utility provides") Motherboard Monitor (CNET: not recommended, requires expert knowledge of your mobo, dangerous) Intel Thermal Analysis Tool (only does cores, not video card? has logging) Useful discussions I found: hardwarecanucks.com , superuser.com 1, 2 , forums.techarena.in (Update: I downloaded Real Temp 3.60 and it meets all my needs, the customizable alert temperature is great. Open Hardware Monitor seems to be the other one that mostly meets my needs, except no alerts; but it is portable. I tried SpeedFan but the interface is very cluttered, too much unnecessary detail (needs a Basic/Advanced mode and a revamp of the interface.) The answer to my underlying issue is nVidia Geforce LE 7500 video card which runs very hot.)

  Read the article

• Linux/hostapd: AP can ping clients, clients can access internet, can't access www@wlan1 with more than 5-6 packets at once

  - by mhambra

  Please edit the title, can't make it sound better. -- OP. Hi all, I have a Wifi USB dongle in a PC, that serves as an AP for laptop. wlan1: 192.168.2.1, netmask 255.255.255.0, routed: route add -net 192.168.2.0 netmask 255.255.255.0 gw 192.168.2.1 ping 192.168.2.2 (laptop): ping was ok for lot of packets. Now, I try to access 192.168.2.1:80/myindex.html (apache) from laptop, and can see that own 1kb test page. But, trying to access 192.168.2.1:80/my.jpg, I see the following: GET /my.jpg HTTP/1.1 200 OK <jpg header, about a kilobyte> <TCP packet retransmisson> <TCP packet retransmisson> <end of stream> It seems to be a hostapd's problem (networked stuff worked fine with Ad-Hoc), but it may be also forwarding/routing problem too. What to google for? Even more strange, SSH to that host works fine.

  Read the article

• Any program to help me check whether an ethernet channel can support full-length VLAN packet?

  - by Jimm Chen

  Sometimes, I have to face such a situation that I need to quickly and explicitly know whether a full length VLAN packet can traverse between two RJ45 ports. Yes, I mean 802.1Q ethernet frame with Etype=81 00 (diagram below). What I can do now is: Get two Windows PCs, for each PC, intall Intel Gigabit NIC and Intel specific driver to create a virtual NIC, with VLAN ID=3 assigned. Then connect the two PCs to each of the two RJ45 port. Finally execute ping to generate a full-length ethernet packet. ping -f -l 1472 <dest-IP> This way, I can be sure that the sent packet has the maximum "IP data payload" of 1500 bytes(8 bytes of ICMP header and 1472 bytes of ICMP data). If the ping gets reply, I know that the ethernet channel support full-length VLAN packet. From my experiment, some home switch or broad band routers(e.g. Linksys WRT54G) does not support full-length VLAN packet switching, so only ping -f -l 1468 succeeds. You see, I have to use an expensive Intel NIC to carry on that test, quite inconvenient. You know, for most laptop today, they do not equip an Intel NIC, and, even it is an Intel NIC, Intel VLAN driver, Intel has limitations on the models on which VLAN driver can be installed. So, my question is: Is there a small program that can let me send a full-length VLAN packet without installing a dedicated VLAN driver? Or better, the program has a stock feature that does the very job for my situation. Windows programs preferred, Linux solution welcome. Simpler the program, the better. Thank you.

  Read the article

• Windows Phone sync error when syncing with iTunes on different Hard Drive

  - by njallam

  I have my iTunes library file on a separate hard drive (which I believe may be the cause of the problem) and I have been trying to use it to synchronize with my Windows Phone. I would like to first note that if I set up my phone to synchronize with 'Windows Libraries', then it works fine. This is however not ideal as I have categorised my music and made playlists etc, on iTunes. When I first link my Windows Phone to the Windows Phone App (for desktop) and select iTunes from the above selection, I get the following error message: After searching that error, I found the following forum threads: Fix for error 8300300B when trying to sync Lumia 920 Windows 8 Phone in PC? Error code 8300300B on Windows Phone 8 while trying to sync I've tried the workarounds described in the above threads, however, they did not work for me. If I ignore that error message, I see the expected interface, along with all of my iTunes library's media, however the 'Sync' button is greyed out. I have tried some other things to try and fix this: Removing the app's AppData folder Uninstalling, reinstalling Using the full-screen modern app (does not allow for iTunes syncing)

  Read the article

• DNS Issue- Nameserver Issue

  - by Master-Man

  I setup new server on centos 5.3 and configure dns and hostnam using WHM. I also register my new nameservers with my domain registrar with ns1.example.com and ns2.example.com. But i am unable to ping hostname and NS. ping pc2.example.com or ping ns1.example.com I received the below email from server. IMPORTANT: Do not ignore this email. Your hostname (pc2.example.com) could not be resolved to an IP address. This means that /etc/hosts is not set up correctly, and/or there is no dns entry for pc2.example.com. Please be sure that the contents of /etc/hosts are configured correctly, and also that there is a correct 'A' entry for the domain in the zone file. Some or all of these problems can be caused by /etc/resolv.conf being setup incorrectly. Please check that file if you believe everything else is correct. You may be able to automatically correct this problem by using the 'Add an A entry for your hostname' option under 'Dns Functions' in your Web Host Manager. When I issue the command root@pc[~]# host pc2.example.com I receive the below error that Host pc2.example.com not found: 3(NXDOMAIN) I added A entries for hostname and Nameservers but nothing replies. Its almost more than 72 hours for setting & registering nameservers and dns configurations. thanks,

  Read the article

• Self-connecting printers

  - by Martin Cerny

  Hello, I work as an administrator in a small company using XP Professional on all computers and two servers with Win 2003 Server. Recently a very unusual problam occured one of the computers keeps connecting to all the printers on the network it doesn't matter if it's an administrator or Domain User as soon as somebody logs in the commputer connects all the printers. The printers are either installed on local computers or on the server and shared. There is no log-on script connecting the printers, I install them manualy and none of the other computers shows such behaviour. We have a printer which is installed on two computers and both of them share it (I'm moving it to Server from a small PC which shared it up to now, but some computers still use the old connection), meaning this specific computer connects to one of the printer two times and it can't use either of the connections. How to prevent this self-connecting to all printers (none of the other computers has this problem). If I delte them from the "Printers" folder everything works fine untill I reconnect and the Folder is once again full of all the printers we have. I solved the smaller problem, computer is now capable of printing on all of the printers (it seems there have been some registry issues), after cleaning the registry and reinstalling the printer it seems to work just fine. But the second thing prevails, the computer connects to all the printers in the network (when I remove one/multiple it is reconnected right after the next log-in by any user).

  Read the article

• What is the correct way to move a file?

  - by Joe McDonald

  We had an issue at my work where I cut and pasted some files. Immediately when I did it, a ton of files were lost. I've been working in IT for 10+ years. I know how to cut and paste a file. Well, when it went up to my managers as to why the files were lost, they deemed it to my cut and paste that caused all the problems and asked why in the world someone as knowledgeable as me would ever cut and paste a file, and didn't I know that was totally the wrong way to move a file? The correct way to move a file is to drag the file. When cutting and pasting, it moves that 1+ GB file (on the server) to the clipboard (on my PC), which, obviously, will cause problems. Dragging a file never hits the clipboard. Be honest, I don't believe that for a minute. I believe when I cut and paste text, it goes to the clipboard. I've seen it in the old versions of windows. But when right clicking on 100+ files that equals 1+ GB, I can't believe that all that data is copied immediately out of whatever share I'm on at the server across my wireless on my laptop to my local clipboard to just go back to the server to another share. It seems they would build some logic in the server OS or my local OS (more likely my local OS) that would say when copying files, don't perform the move action until I click paste and if the files are staying local to where they were before, just move them. So, who's right?

  Read the article

< Previous Page | 303 304 305 306 307 308 309 310 311 312 313 314  | Next Page >