Search Results

Search found 21955 results on 879 pages for 'self host'.

Page 308/879 | < Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >

• Windows 8 Pro Hyper-V guest with no internet

  - by Perplexed

  Trying to get this working on my Windows 8 Pro machine. I created an External Switch Assigned the newly available adapter to a Guest machine with Win 2008 os. My host has internet connection. Host can ping Guest, Guest cannot ping Host. Guest has no internet connection. Pasting the ip of both host and guest. Your help appreciated. HOST ========================== Ethernet adapter vEthernet (EXTSW01): Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Hyper-V Virtual Ethernet Adapter #2 Physical Address. . . . . . . . . : 9C-B7-0F-0F-D7-D0 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::5434:a9fd:8611:d207%54(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.15(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Saturday, September 8, 2012 12:34:44 PM Lease Expires . . . . . . . . . . : Saturday, September 15, 2012 12:34:44 PM Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DHCPv6 IAID . . . . . . . . . . . : 916240141 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-DC-C9-2C-9C-B7-0D-0D-D7-D0 DNS Servers . . . . . . . . . . . : 64.71.255.999 NetBIOS over Tcpip. . . . . . . . : Enabled GUEST ========================== Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter Physical Address. . . . . . . . . : 00-15-5D-3F-0F-00 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::953f:ec5c:5d84:1b50%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.20(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 0.0.0.0 DHCPv6 IAID . . . . . . . . . . . : 234886493 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-DD-2F-29-0F-15-5E-00-0F-00 DNS Servers . . . . . . . . . . . : ::1 127.0.0.1 NetBIOS over Tcpip. . . . . . . . : Enabled

  Read the article

• Problem with keyboard layout when OS X 10.6.3 -> Fedora 13

  - by user20196

  Hi, I have VMware installed on Fedora 13 (host OS) /amd 64bit. When I log to it from console VMware works good. I wanted to start remotely from OS X 10.6.3, so I installed NX client. Everything is fine with the keyboard layout if I do not use VMware. When I try to run the guest OS on VMware my keyboard is cut off completely. The host and the guest OSes are setup for "us" layout and for "generic 105 keys" keyboard.

  Read the article

• Hyper-V Guests suddenly stopped working

  - by Anton Gogolev

  Hi! Here's my configuration: Windows Server 2008 R2 Standard as a host OS, and two guests VMs running the same exact OS. Yesterday, Trial Activation on all OSes has expired and quite naturally all machines shut down. I rearmed the host, but cannot log on to either guest VMs. From what I see, they start up normally (State is listed as Running) but CPU Usage seems to be stuck at 3% and when I connect to it all I see is black textmode screen with cursor blinking. One of my VMs has several snapshots, and when I revert back, it starts up normally. Moreover, "reference VM" (the one I cloned these two VMs from) starts up just normally. How can I troubleshoot this issue?

  Read the article

• Virtual Machine files on ramdisk doesn't run faster than on physical disk

  - by Landy

  I installed total 36G memory (4x8G + 2x2G) in the host (Windows 7) and I used ImDisk to create a 32G ramdisk and format it to NTFS file system. Then I copied the virtual machine (in VMware Workstation format) folder, including vmx, vmdk, etc... to the new created ram disk. Then I tried to power on it in VMware Workstation. What made me surprised is that the performance is not better than before. It cost almost the same time to power on the Windows 7 VM. I check the Resource Monitor in the Windows 7 host, and the statistics of CPU, disk, network are rather normal. The memory has reported 3000+ hard fault/sec when guest OS boot then drop to 0 after the guest powered on. Any idea about this issue? I had thought the performance of ramdisk will be better than physical disk in this case. Am I wrong? Thanks.

  Read the article

• Point example.com to webserver in DNS record

  - by ggstevens

  I have a Mac Mini Server (named Server) with the following DNS setup Primary Zone: example.com mysql-host.example.com machine (10.0.0.101) server.example.com machine (10.0.0.100) server.example.com nameserver (10.0.0.100) www.example.com machine (10.0.0.102) www.example.com is a linux box with Apache. How do I get both example.com and www.example.com to work. Right now, I can view my website with www.example.com only. I know there's nothing that points example.com to the IP, but when I create a machine record without a hostname I get an error (This machine record cannot be created without a host name.).

  Read the article

• How is DNS used by individual processes?

  - by atroon

  When resolving FQDNs or machine names to IP addresses on my local network (mycompany.internal) I can use dig on the command line (linux/mac) or nslookup (windows) to query the configured server and get a response. But trying to enter the FQDN or even just the machine name in a ping command or in a web browser results in 'Unknown Host' or DNS errors. Here's a sample, this one from the Mac: mac:~ atroon$ dig server.mycompany.internal ; <<>> DiG 9.6.0-APPLE-P2 <<>> server.mycompany.internal ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 5219 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;server.mycompany.internal. IN A ;; ANSWER SECTION: server.mycompany.internal. 1200 IN A 172.16.254.36 ;; Query time: 0 msec ;; SERVER: 172.16.254.8#53(172.16.254.8) ;; WHEN: Wed Dec 16 11:39:15 2009 ;; MSG SIZE rcvd: 55 mac:~ atroon$ ping server.mycompany.internal<br> ping: cannot resolve server.mycompany.internal: Unknown host I cannot for the life of me figure this one out. The DNS server is a SBS 2003 box which handles AD, some file/print, etc for a small company network. This issue happens to me about three times a week, and when I'm connected to the local network directly, the same switch as the server even. I can make any connection I want with IP addresses, I just can't make DNS work. Additionally, at the same time I'm experiencing this, other users are fine, which makes me think it's a problem on my Mac. But what sort of problem? How can dig send a query and get a reply, and ping say 'unknown host'? I'm posting here vs. serverfault because I think this is a local problem not a server problem...but if anyone can point me at the server, I guess we'll head down the street a domain or two.

  Read the article

• Rsync over ssh: "ERROR: module is read only" suddenly appeared

  - by user978548

  I've used from some time rsync/ssh to backup my shared host contents to my personal Synology NAS (212j for that matter), and it worked quite well. For information, I use a password-less ssh connection. 3 days ago, I updated my NAS software and since (or at least I believe it's since that), the backup won't work anymore. I get the following error on the host: rsync: writefd_unbuffered failed to write 4 bytes to socket [sender]: Broken pipe (32) ERROR: module is read only ..which I do not understand. beside that nothing changed that I know of in both source and destination that can be related to rsync or ssh, I did check a few things and all seems to be alright: I can still connect through ssh from the host to my NAS with the good user, so ssh stuff like keys haven't changed. I also have the correct file permissions on the NAS (I checked, and also tried to create files, directories, .. with the user used by rsync through ssh). I read here and there that the error means that I have to ensure that my rsyncd.conf have the right read only = no in it, but as far as I know, I never used rsyncd as well as I never configured anything for it and until now it worked like a charm.. I use the following command to do the backup: rsync -ab --recursive \ --files-from="$FILES_FROM" \ --backup-dir=backup_$SUFFIX \ --delete \ --filter='protect backup_*' \ $WDIRECTORY/ \ remote_backup:$REMOTE_BACKUP/ So I'm stuck and really can't figure out what happened. Edit: As suggested in comments, I also tried passing commands to ssh (but not from inside a ssh session), that worked as expected, and also tried a single rsync command, which didnt worked, failing just like the complete backup command. (sharedHost):hostuser:~ > touch test.txt (sharedHost):hostuser:~ > rsync test.txt remote_backup:backups/test.txt ERROR: module is read only rsync error: syntax or usage error (code 1) at main.c(1034) [Receiver=3.0.8] rsync: connection unexpectedly closed (9 bytes received so far) [sender] rsync error: error in rsync protocol data stream (code 12) at io.c(601) [sender=3.0.7] and (sharedHost):hostuser:~ > ssh remote_backup 'touch /abs_path_to_backups/backups/test2.txt && echo "ProoF" > /abs_path_to_backups/backups/test2.txt' (sharedHost):hostuser:~ > ssh remote_backup 'cat /abs_path_to_backups/backups/test2.txt' ProoF

  Read the article

• tracd multiple projects+nginx reverse proxy

  - by Xeross

  I am trying to setup nginx with a reverse proxy to tracd, however I only want to use 1 tracd. Now first here's my config for this domain server { listen 80; server_name bugs.XXXXXXXX.com; access_log /var/log/nginx/XXXXXXXX-bugtracker.access.log proxy; location / { rewrite ^/bugtracker/(.*)$ /$1; rewrite ^/bugtracker$ /; proxy_pass http://127.0.0.1:81/bugtracker/; proxy_redirect default; proxy_set_header Host $host; } location ~ /\.ht { deny all; } } As you can see there's the rewrite rules, because for some reason all the urls that tracd spews out are like /bugtracker/something. Now this is indeed caused by tracd just sending urls like it normally should however trac is at bugs.XXXXXXXX.com/ and not at bugs.XXXXXXXX.com/bugtracker. So how can I make tracd/trac display the (In this case) correct urls ?

  Read the article

• How can I restore VM on a new Hyper-V server?

  - by jaloplo

  Hi all, I was working gladly with my VM on my local Hyper-V server. But, after installing some updates on the host the system only show the famous blue screen. I couldn't start my host so I reinstalled it and configured as new Hyper-V server. My VM was in a another disk to prevent this happening but I don't know how to add it as a new VM on new server. In addition, this VM has various snapshots so, how can I add this VM to my new Hyper-V server? UPDATE: I can't do Export/Import because my server crashed before I can't do it.

  Read the article

• Secure Apache Virtual Hosts?

  - by Dr Hydralisk

  I am going to host a few small sites on VPS, and each of them are going to run my own custom PHP scripts. I am fairly certain that they are secure (did everything in the book, plus some of which is not in the book) to make sure they can't be exploited. But just to be safe I want to know how I could secure each of the virtual hosts so that they can't escape from there virtual host (if a hacker uploaded a shell they could not go above the www folder a legitimate user can't do in ftp no matter how many times they click ..) folder on Debian and Apache.

  Read the article

• Image Magick and Ghostscript

  - by user114671

  I mainly do web design but I host a few client sites on a Centos 5 VPS. A new client has asked me to host their site and I've been given the following configuration requirement: Apache 2.2.3 PHP 5.2.17 MySQL 5.0.77 Image Magick 6.5.1-0 (not as an Apache module) Ghostscript 8.7 Checking php_info() I have: Apache 2.2.3 PHP 5.2.14 MySQL 5.0.90 I don't have IM or GS listed. I expect that my versions of PHP and MySQL are similar enough to work, but how do I get my server set up to work with this client's site as well?

  Read the article

• mount dev, proc, sys in a chroot environment?

  - by Patrick

  I'm trying to create a Linux image with custom picked packages. I followed the guide here http://www.olpcnews.com/forum/index.php?topic=4766.0 However, when I tried to install some packages, it failed to configure due to missing the proc, sys, dev directories. So, I learned from other places that I need to "mount" the host proc, ... directories to my chroot environment. Though, I saw two syntax and am not sure which one to use. In host machine: mount --bind /proc <chroot dir>/proc and another syntax (in chroot envrionment): mount -t proc none /proc Which one should I use, and what are the difference? Edit: What I'm trying to do is to hand craft the packages I'm going to use on an XO laptop, because compiling packages takes really long time on the real XO hardware, if I can build all the packages I need and just flash the image to the XO, I can save time and space.

  Read the article

• set tap0 using virt-manager for bridged wireless

  - by DaveO

  After 3 days I finally have kvm guests working on the network via wireless (link below - thanks!): My network is 192.168.1.0/24 on the host: sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" sudo tunctl -t tap0 sudo ip link set tap0 up sudo ip addr add 192.168.1.25/24 dev tap0 sudo route add -host 192.168.1.30 dev tap0 sudo parprouted wlan0 tap0 on the guest: auto eth0 iface eth0 inet static address 192.168.1.30 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.25 and start the guest: sudo kvm /path/to/guest.img -net nic,macaddr=DE:AD:BE:EF:90:26 -net tap,ifname=tap0,script=no This works great and I can ping the local network and the internet back and forth between the guest. But how do I add these settings to the guest's xml config so I can start the guest via virt-manager with the same nic settings? ref: http://www.linuxquestions.org/questions/debian-26/kvm-wireless-bridge-network-691953/

  Read the article

• What emulator / VM software can I use to create a Win32-portable Linux Guest?

  - by Jotham

  Hi, I want to create a portable VM setup so that I can boot a Linux install regardless of which Windows XP / Windows 7 host machine I am on. I was looking at Qemu but it doesn't appear to have a relatively safe win32 build. Other things like VirtualBox require complete install on the host OS for performance reasons. I'm not so concerned about performance, I just want to run a few curses based applications. My ideal end goal would be a a memory stick of some size with a VM/Emulator I can boot on most WinXP/Windows 7 machines and access my own curses based applications (probably archlinux or debian). Any help would be appreciated. Regards,

  Read the article

• adding remote ssh printer as local printer

  - by guest

  I have SSH access to a remote host (FreeBSD) that has a printer set up. I do not have root access on that host or any other special user rights. Now I want to print directly from my laptop on that printer (Ubuntu 10.10). The problem is that I don't know how to "import" or whatever the the printer, as it needs authetification from my user account (print quota limitations). E-mailing me the files I want to print or scp them every time is a pain, ATM I pipe the PostScript output manually to a ssh command, but that's also a huge working overhead. E.g. when I want to print a foo.pdf pdftops '/path/to/foo.pdf' - | ssh user@remotehost 'lpr -P printername' So, does anyone know of a smooth way to shorten this procedure? Ideally I would just want to use a printername instead of the whole ssh command

  Read the article

• Accessing Windows from Linux/Mac by name using TCP/IP

  - by stevekuo

  What are some solutions to access Windows by its computer name from Linux and Mac using TCP/IP. That is, from terminal I want to be able to ping my Windows PCs using its host name. My setup is: Various machines running Ubuntu, Windows XP and OS X. Networked using a consumer grade wireless router which provides DHCP. The only DNS is the ISP's, which resolves Internet names and not local host names. The Windows machines can ping each other by name. The Ubuntu and OS X machines can only ping Windows by IP address (name doesn't work).

  Read the article

• How to specify a different ip address in virtual box guest os

  - by Nrew

  I am using Windows 7 as the host. And xp as guest. I've already check out this site: http://forums.virtualbox.org/viewtopic.php?f=3&t=17232 But the info is not complete. What do I need to set here, so that the guest would have another IP Address but can still connect to the internet. Because what I'm trying to accomplish here is to be able to try Team Viewer or Cross loop. With the host os and guest os. Because I only have one computer.

  Read the article

• Remote kill, upload, execute file

  - by Masoud M.

  I'm developing a program and I need to upload my xyz.exe file to many host machines and execute them frequently. I need a server-client tool to do it as below steps after an update signal from my PC: Those host machine should kill any running processes with name xyz.exe. Download my new xyz.exe. Then execute new xyz.exe. I know about some tools like PsExec, but I need a tools with better user-interface and more powerful. Is there any tool to do it ? UPDATE: The systems are in a same LAN, OS is windows (XP or 7), No full remote access is needed. I'm a developer and my program should run in remote hosts and I'm testing my application.

  Read the article

• Nginx Proxying to Multiple IP Addresses for CMS' Website Preview

  - by Matthew Borgman

  First-time poster, so bear with me. I'm relatively new to Nginx, but have managed to figure out what I've needed... until now. Nginx v1.0.15 is proxying to PHP-FPM v.5.3.10, which is listening at http://127.0.0.1:9000. [Knock on wood] everything has been running smoothly in terms of hosting our CMS and many websites. Now, we've developed our CMS and configured Nginx such that each supported website has a preview URL (e.g. http://[WebsiteID].ourcms.com/) where the site can be, you guessed it, previewed in those situations where DNS doesn't yet resolve to our server, etc. Specifically, we use Nginx's Map module (http://wiki.nginx.org/HttpMapModule) and a regular expression in the server_name of the CMS' server{ } block to 1) lookup a website's primary domain name from its preview URL and then 2) forward the request to the "matched" primary domain. The corresponding Nginx configuration: map $host $h { 123.ourcms.com www.example1.com; 456.ourcms.com www.example2.com; 789.ourcms.com www.example3.com; } and server { listen [OurCMSIPAddress]:80; listen [OurCMSIPAddress]:443 ssl; root /var/www/ourcms.com; server_name ~^(.*)\.ourcms\.com$; ssl_certificate /etc/nginx/conf.d/ourcms.com.chained.crt; ssl_certificate_key /etc/nginx/conf.d/ourcms.com.key; location / { proxy_pass http://127.0.0.1/; proxy_set_header Host $h; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } } (Note: I do realize that the regex in the server_name should be "tighter" for security reasons and match only the format of the website ID (i.e. a UUID in our case).) This configuration works for 99% of our sites... except those that have a dedicated IP address for an installed SSL certificate. A "502 Bad Gateway" is returned for these and I'm unsure as to why. This is how I think the current configuration works for any requests that match the regex (e.g. http://123.ourcms.com/): Nginx looks up the website's primary domain from the mapping, and as a result of the proxy_pass http://127.0.0.1 directive, passes the request back to Nginx itself, which since the proxied request has a hostname corresponding to the website's primary domain name, via the proxy_set_header Host $h directive, Nginx handles the request as if it was as direct request for that hostname. Please correct me if I'm wrong in this understanding. Should I be proxying to those website's dedicated IP addresses? I tried this, but it didn't seem to work? Is there a setting in the Proxy module that I'm missing? Thanks for the help. MB

  Read the article

• Configuring BIND to use VM's DNS for specific domain

  - by Srirangan

  I work on a project for which I use an Ubuntu server vm on an Ubuntu host. The VM runs all the services / webapps through haproxy and nginx and serves it on the domain (xyz.com). I manually modify my resolv.conf to use the VMs IP address as the nameserver and I can run my app on the host browser. The problem is I am modifying an auto-generated file (resolv.conf) and I need to do it each time. Is there a smart way to say: -- are you accessing xyz.com? -- if yes use VM's DNS server, else use the hosts

  Read the article

• Virtual environment firewall with CSF + iptables rules on VM?

  - by luison

  We are getting into virtualization with a Proxmox VE (OpenVZ + KVM) server. Our plan for firewall is to have CSF (http://configserver.com/cp/csf.html) running on the host machine as we've had a reasonable good experience with it in the past. Apart from that we plan simple firewall rules on the VM machines (mostly OpenVZ containers with same kernel) and maybe fail2ban simple specific rules. I would appreciate comments with anyone with similar experiences? I understand all traffic comes via the host machine so a combined firewall there with specific firewalling on the VM should work, alltough some iptables rules are hard to get to work on OpenVZ containers.

  Read the article

• WordPress 3.5 Multisite and nginx siteurl issues

  - by Florin Gogianu

  I'm setting up multisite on localhost in subdirectories. The problem is that when I'm trying to access the dashboard of a site I just created ( localhost/wptest/site/wp-admin ) I get "This webpage has a redirect loop" and when I try to access the actual website ( localhost/wptest/site ) the page loads but without assets, such as css. When I access the network dashboard, or the primary site dashboard on localhost/wptest everything is just fine. Also when I edit the permalink of the second site in the network dashboard, to be like this: localhost/site it also runs fine. How to make it work with the default permalink structure localhost/wptest/site? The wordpress files are in /usr/share/html/wptest The wp-config.php is as follows: define('WP_ALLOW_MULTISITE', true); define('MULTISITE', true); define('SUBDOMAIN_INSTALL', false); define('DOMAIN_CURRENT_SITE', 'localhost'); define('PATH_CURRENT_SITE', '/wptest/'); define('SITE_ID_CURRENT_SITE', 1); define('BLOG_ID_CURRENT_SITE', 1); And the server block / virtual host is like this: server { ##DM - uncomment following line for domain mapping listen 80 default_server; #server_name example.com *.example.com ; ##DM - uncomment following line for domain mapping #server_name_in_redirect off; access_log /var/log/nginx/example.com.access.log; error_log /var/log/nginx/example.com.error.log; root /usr/share/nginx/html/wptest; index index.html index.htm index.php; if (!-e $request_filename) { rewrite /wp-admin$ $scheme://$host$uri/ permanent; rewrite ^(/[^/]+)?(/wp-.*) $2 last; rewrite ^(/[^/]+)?(/.*\.php) $2 last; } location / { try_files $uri $uri/ /index.php?$args ; } location ~ \.php$ { try_files $uri /index.php; include fastcgi_params; fastcgi_pass unix:/var/run/php5-fpm.sock; } location ~* ^.+\.(ogg|ogv|svg|svgz|eot|otf|woff|mp4|ttf|rss|atom|jpg|jpeg|gif|png|ico|zip|tgz|gz|rar|bz2|doc|xls|exe|ppt|tar|mid|midi|wav|bmp|rtf)$ { access_log off; log_not_found off; expires max; } location = /robots.txt { access_log off; log_not_found off; } location ~ /\. { deny all; access_log off; log_not_found off; } } And finally here's an error log: 2013/06/29 08:05:37 [error] 4056#0: *52 rewrite or internal redirection cycle while internally redirecting to "/index.php", client: 127.0.0.1, server: example.com, request: "GET /nginx HTTP/1.1", host: "localhost"

  Read the article

• Sending emails with remote mail server in ASP.NET blocked by Windows firewall?

  - by Dave

  I want to migrate a web application from a Windows Server 2003 to a Windows Server 2008 R2. All works fine except sending emails from the application. If I configure the application to use the smtp server on "localhost" it works, but changing it to the "real" host name (e.g. mail.example.org) no mail is sent. The error message says, that the remote server needs a secure connection or smtp authentication. But since it works when using "localhost" instead of the host name I doubt that this is the problem. Also it's unlikely a problem with the mail server, I also tried it with another one. So for me it seems like the firewall is blocking the outgoing connection to the mail server. I tried to open port 25, but it still did not work. Maybe I just did it the wrong way.

  Read the article

• Virtual firewall to protect hypervisor

  - by manutenfruits

  I am running an Ubuntu Server 12.10 as a single host connected to a NATed router connected using PPPoE to a optical fiber modem. This server is meant to be accessed from the Internet, but also to be used from the LAN as a SVN, MySQL and what not... The issue is that the router is not customizable enough to serve, so I was thinking about creating a virtual pfSense firewall using KVM inside of the server itself, removing the need of the router. Is this possible? Can the host ignore and block all traffic coming to itself, but not for the firewall? I am aware this is not the most desirable environment, I accept suggestions based on budget!

  Read the article

• Windows 7 will not install a root certificate

  - by Farseeker

  I have a web service that uses a self-signed certificate, so I need to install the certificate as a Trusted Root so that I can avoid all the security errors that having a self-signed certificate brings with it. Using Windows 7, I'm going to: Start > Internet Explorer > Run as Administrator > Tools > Internet Options > Content > Certificates > Trusted Root Certification Authorities > Import > (select file) > Next > OK, and Windows reports Import Successful However, the import is NOT successful. The certificate does not show in the list of trusted roots, and certificate errors still show up. If I import the certificate into the Trusted Publishers container, it imports correctly, but this does not solve my security errors. Any ideas?

  Read the article

< Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >