Search Results

Search found 9370 results on 375 pages for 'wcf rest contrib'.

Page 308/375 | < Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >

  • Lead, Follow, or Get out of the way

    - by Daniel Moth
    This is one of the sayings (attributed to Thomas Paine) that totally resonated with me from the first time I heard it, which was only 3 years ago during some training course at work: "Lead, Follow, or Get out of the way" You'll find many books with this title and you'll find it quoted by politicians and other leaders in various countries at various times... the quote is open to interpretation and works on many levels. To set the tone of what this means to me, I'll use a simple micro example: In any given conversation, you are either leading it or following it, at different times/snapshots of the conversation. If you are not willing or able to lead it, and you are not willing or able to follow it, then you should depart. The bad alternative which this guidance encourages you NOT to do is to stick around and obstruct progress by not following, not leading, and simply complaining or trying to derail the discussion in no particular direction. The same pattern applies at your position/role at work. Either follow your management/leadership team, or try to lead them to what you think is a better place, or change jobs. Don't stick around complaining about the direction things are going, while not actively trying to either change things or make peace with it. In the previous paragraph you can replace the word "your management" with "the people reporting to you" and the guidance still holds. Either lead your direct reports to where you think they should go, or follow their lead, or change jobs. Complaining about folks not taking direction while doing nothing is not a maintainable state. To me this quote is not about a permanent state, it is not about some people always leading and some always following: It is about a role/hat that anybody can play/wear at any given moment. One minute I am leading you, the next I am following you, and the next we are both following someone else and so on... When there is disagreement, debate the different directions for as long as it takes for you to be comfortable that you can either follow or lead. If you don't become comfortable with either of those, get out of the way. Something to remember is that it is impossible to learn how to lead well, without learning how to follow well (probably deserves its own blog entry)... Things go wrong when someone thinks that they must always be leading, or when everybody wants to follow and nobody steps up to lead... Things go wrong when more than one person wants to lead and they don't try to reach agreement on a shared direction, stubbornly sticking to their guns pulling the rest of the team in multiple directions... Things go wrong when more than one person wants to lead and after numerous and lengthy discussions, none of them decides to follow or get out of the way... Things go wrong when people don't want to lead, don't want to follow, and insist on sticking around... While there are a few ways things that can go wrong as enumerated in the previous paragraph, the most common one in my experience is the last one I mentioned. You'll recognize these folks as the ones that always complain about everything that is wrong with their company/product but do nothing about it. Every time you hear someone giving feedback on how something is wrong or suboptimal, ask them "So now that you identified the problem, what do you think the solution is and what are you doing to drive us to that solution?" The next time things start going wrong, step up and remind everyone: Lead, Follow, or Get out of the way. For more perspectives, and for input to help you form your own interpretation, search the web for this phrase to see in what contexts it is being used (bing, google). Finally, regardless of your political views, I hope you can appreciate if only as an example this perspective of someone leading by actually getting out of the way. Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • Access Control Service: Transitioning between Active and Passive Scenarios

    - by Your DisplayName here!
    As I mentioned in my last post, ACS features a number of ways to transition between protocol and token types. One not so widely known transition is between passive sign ins (browser) and active service consumers. Let’s see how this works. We all know the usual WS-Federation handshake via passive redirect. But ACS also allows driving the sign in process yourself via specially crafted WS-Federation query strings. So you can use the following URL to sign in using LiveID via ACS. ACS will then redirect back to the registered reply URL in your application: GET /login.srf?   wa=wsignin1.0&   wtrealm=https%3a%2f%2faccesscontrol.windows.net%2f&   wreply=https%3a%2f%2fleastprivilege.accesscontrol.windows.net%3a443%2fv2%2fwsfederation&   wp=MBI_FED_SSL&   wctx=pr%3dwsfederation%26rm%3dhttps%253a%252f%252froadie%252facs2rp%252frest%252f The wsfederation bit in the wctx parameter indicates, that the response to the token request will be transmitted back to the relying party via a POST. So far so good – but how can an active client receive that token now? ACS knows an alternative way to send the token request response. Instead of doing the redirect back to the RP, it emits a page that in turn echoes the token response using JavaScript’s window.external.notify. The URL would look like this: GET /login.srf?   wa=wsignin1.0&   wtrealm=https%3a%2f%2faccesscontrol.windows.net%2f&   wreply=https%3a%2f%2fleastprivilege.accesscontrol.windows.net%3a443%2fv2%2fwsfederation&   wp=MBI_FED_SSL&   wctx=pr%3djavascriptnotify%26rm%3dhttps%253a%252f%252froadie%252facs2rp%252frest%252f ACS would then render a page that contains the following script block: <script type="text/javascript">     try{         window.external.Notify('token_response');     }     catch(err){         alert("Error ACS50021: windows.external.Notify is not registered.");     } </script> Whereas token_response is a JSON encoded string with the following format: {   "appliesTo":"...",   "context":null,   "created":123,   "expires":123,   "securityToken":"...",   "tokenType":"..." } OK – so how does this all come together now? As an active client (Silverlight, WPF, WP7, WinForms etc). application, you would host a browser control and use the above URL to trigger the right series of redirects. All the browser controls support one way or the other to register a callback whenever the window.external.notify function is called. This way you get the JSON string from ACS back into the hosting application – and voila you have the security token. When you selected the SWT token format in ACS – you can use that token e.g. for REST services. When you have selected SAML, you can use the token e.g. for SOAP services. In the next post I will show how to retrieve these URLs from ACS and a practical example using WPF.

    Read the article

  • Can't update scala on Gentoo

    - by xhochy
    As I wanted to test Scala 2.9.2 on my gentoo system I tried updated the package but ended up with this error. I can't figure out where the problem may be: Calculating dependencies ...... done! >>> Verifying ebuild manifests >>> Jobs: 0 of 1 complete, 1 running Load avg: 0.23, 0.16, 0.20 >>> Emerging (1 of 1) dev-lang/scala-2.9.2 >>> Jobs: 0 of 1 complete, 1 running Load avg: 0.23, 0.16, 0.20 >>> Failed to emerge dev-lang/scala-2.9.2, Log file: >>> Jobs: 0 of 1 complete, 1 running Load avg: 0.23, 0.16, 0.20 >>> '/var/tmp/portage/dev-lang/scala-2.9.2/temp/build.log' >>> Jobs: 0 of 1 complete, 1 running Load avg: 0.23, 0.16, 0.20 >>> Jobs: 0 of 1 complete, 1 running, 1 failed Load avg: 0.23, 0.16, 0.20 >>> Jobs: 0 of 1 complete, 1 failed Load avg: 0.23, 0.16, 0.20 * Package: dev-lang/scala-2.9.2 * Repository: gentoo * Maintainer: [email protected] * USE: amd64 elibc_glibc kernel_linux multilib userland_GNU * FEATURES: sandbox [01m[31;06m!!! ERROR: Couldn't find suitable VM. Possible invalid dependency string. Due to jdk-with-com-sun requiring a target of 1.7 but the virtual machines constrained by virtual/jdk-1.6 and/or this package requiring virtual(s) jdk-with-com-sun[0m * Unable to determine VM for building from dependencies: NV_DEPEND: virtual/jdk:1.6 java-virtuals/jdk-with-com-sun !binary? ( dev-java/ant-contrib:0 ) app-arch/xz-utils >=dev-java/java-config-2.1.9-r1 source? ( app-arch/zip ) >=dev-java/ant-core-1.7.0 dev-java/ant-nodeps >=dev-java/javatoolkit-0.3.0-r2 >=dev-lang/python-2.4 * ERROR: dev-lang/scala-2.9.2 failed (setup phase): * Failed to determine VM for building. * * Call stack: * ebuild.sh, line 93: Called pkg_setup * scala-2.9.2.ebuild, line 43: Called java-pkg-2_pkg_setup * java-pkg-2.eclass, line 53: Called java-pkg_init * java-utils-2.eclass, line 2187: Called java-pkg_switch-vm * java-utils-2.eclass, line 2674: Called die * The specific snippet of code: * die "Failed to determine VM for building." * * If you need support, post the output of `emerge --info '=dev-lang/scala-2.9.2'`, * the complete build log and the output of `emerge -pqv '=dev-lang/scala-2.9.2'`. !!! When you file a bug report, please include the following information: GENTOO_VM= CLASSPATH="" JAVA_HOME="" JAVACFLAGS="" COMPILER="" and of course, the output of emerge --info * The complete build log is located at '/var/tmp/portage/dev-lang/scala-2.9.2/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/dev-lang/scala-2.9.2/temp/die.env'. * Working directory: '/var/tmp/portage/dev-lang/scala-2.9.2' * S: '/var/tmp/portage/dev-lang/scala-2.9.2/work/scala-2.9.2-sources' * Messages for package dev-lang/scala-2.9.2: * Unable to determine VM for building from dependencies: * ERROR: dev-lang/scala-2.9.2 failed (setup phase): * Failed to determine VM for building. * * Call stack: * ebuild.sh, line 93: Called pkg_setup * scala-2.9.2.ebuild, line 43: Called java-pkg-2_pkg_setup * java-pkg-2.eclass, line 53: Called java-pkg_init * java-utils-2.eclass, line 2187: Called java-pkg_switch-vm * java-utils-2.eclass, line 2674: Called die * The specific snippet of code: * die "Failed to determine VM for building." * * If you need support, post the output of `emerge --info '=dev-lang/scala-2.9.2'`, * the complete build log and the output of `emerge -pqv '=dev-lang/scala-2.9.2'`. * The complete build log is located at '/var/tmp/portage/dev-lang/scala-2.9.2/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/dev-lang/scala-2.9.2/temp/die.env'. * Working directory: '/var/tmp/portage/dev-lang/scala-2.9.2' * S: '/var/tmp/portage/dev-lang/scala-2.9.2/work/scala-2.9.2-sources' The following eix output may help: % eix java-virtuals/jdk-with-com-sun [I] java-virtuals/jdk-with-com-sun Available versions: 20111111 {{ELIBC="FreeBSD"}} Installed versions: 20111111(16:08:51 18/04/12)(ELIBC="-FreeBSD") Homepage: http://www.gentoo.org Description: Virtual ebuilds that require internal com.sun classes from a JDK Both virtual jdks 1.6 and 1.7 are installed: % eix virtual/jdk [I] virtual/jdk Available versions: (1.4) ~1.4.2-r1[1] (1.5) 1.5.0 ~1.5.0-r3[1] (1.6) 1.6.0 1.6.0-r1 (1.7) (~)1.7.0 Installed versions: 1.6.0-r1(1.6)(23:22:48 10/11/12) 1.7.0(1.7)(23:21:09 10/11/12) Description: Virtual for JDK [1] "java-overlay" /var/lib/layman/java-overlay

    Read the article

  • 12.04 making BCM4313 card work with aircrack-ng?

    - by Charles Forest
    I'm a real Linux Noob, just started using it (this month) and until now i had no issues. now i'm trying to set-up aircrack-ng on my laptop, but it seems like it's using the worst card possible (or almost) there is a TON of tutorial on this card (seems to be hell to set-up) i have tryed some, but i ended up uninstalling my drivers, messing with my desktops, and ended by having no more "X" to close my windows (i have no clue how i ended there) i just re-installed my linux (took me 2 hours to setup everything again), but now i'm a bit "Scared" to try tutorials randomly again. Right now it says the driver is wl, wich is not the one i want (AFAIK it's not supported) i'm not sure what kind of informations are needed, but here's what i think could be usefull. lspci -knn 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: agpgart-intel 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel modules: iTCO_wdt 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel modules: i2c-i801 01:00.0 3D controller [0302]: NVIDIA Corporation GF108 [GeForce GT 540M] [10de:0df4] (rev a1) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb WIRELESS CARD 02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Wistron NeWeb Corp. Device [185f:051a] Kernel driver in use: wl Kernel modules: wl, bcma, brcmsmac REST... 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: r8169 Kernel modules: r8169 04:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: xhci_hcd Also, if i'm "screwed" with my hardware, just tell me.

    Read the article

  • Good DBAs Do Baselines

    - by Louis Davidson
    One morning, you wake up and feel funny. You can’t quite put your finger on it, but something isn’t quite right. What now? Unless you happen to be a hypochondriac, you likely drag yourself out of bed, get on with the day and gather more “evidence”. You check your symptoms over the next few days; do you feel the same, better, worse? If better, then great, it was some temporal issue, perhaps caused by an allergic reaction to some suspiciously spicy chicken. If the same or worse then you go to the doctor for some health advice, but armed with some data to share, and having ruled out certain possible causes that are fixed with a bit of rest and perhaps an antacid. Whether you realize it or not, in comparing how you feel one day to the next, you have taken baseline measurements. In much the same way, a DBA uses baselines to gauge the gauge health of their database servers. Of course, while SQL Server is very willing to share data regarding its health and activities, it has almost no idea of the difference between good and bad. Over time, experienced DBAs develop “mental” baselines with which they can gauge the health of their servers almost as easily as their own body. They accumulate knowledge of the daily, natural state of each part of their database system, and so know instinctively when one of their databases “feels funny”. Equally, they know when an “issue” is just a passing tremor. They see their SQL Server with all of its four CPU cores running close 100% and don’t panic anymore. Why? It’s 5PM and every day the same thing occurs when the end-of-day reports, which are very CPU intensive, are running. Equally, they know when they need to respond in earnest when it is the first time they have heard about an issue, even if it has been happening every day. Nevertheless, no DBA can retain mental baselines for every characteristic of their systems, so we need to collect physical baselines too. In my experience, surprisingly few DBAs do this very well. Part of the problem is that SQL Server provides a lot of instrumentation. If you look, you will find an almost overwhelming amount of data regarding user activity on your SQL Server instances, and use and abuse of the available CPU, I/O and memory. It seems like a huge task even to work out which data you need to collect, let alone start collecting it on a regular basis, managing its storage over time, and performing detailed comparative analysis. However, without baselines, though, it is very difficult to pinpoint what ails a server, just by looking at a single snapshot of the data, or to spot retrospectively what caused the problem by examining aggregated data for the server, collected over many months. It isn’t as hard as you think to get started. You’ve probably already established some troubleshooting queries of the type SELECT Value FROM SomeSystemTableOrView. Capturing a set of baseline values for such a query can be as easy as changing it as follows: INSERT into BaseLine.SomeSystemTable (value, captureTime) SELECT Value, SYSDATETIME() FROM SomeSystemTableOrView; Of course, there are monitoring tools that will collect and manage this baseline data for you, automatically, and allow you to perform comparison of metrics over different periods. However, to get yourself started and to prove to yourself (or perhaps the person who writes the checks for tools) the value of baselines, stick something similar to the above query into an agent job, running every hour or so, and you are on your way with no excuses! Then, the next time you investigate a slow server, and see x open transactions, y users logged in, and z rows added per hour in the Orders table, compare to your baselines and see immediately what, if anything, has changed!

    Read the article

  • Personal Financial Management – The need for resuscitation

    - by Salil Ravindran
    Until a year or so ago, PFM (Personal Financial Management) was the blue eyed boy of every channel banking head. In an age when bank account portability is still fiction, PFM was expected to incentivise customers to switch banks. It still is, in some emerging economies, but if the state of PFM in matured markets is anything to go by, it is in a state of coma and badly requires resuscitation. Studies conducted around the year show an alarming decline and stagnation in PFM usage in mature markets. A Sept 2012 report by Aite Group – Strategies for PFM Success shows that 72% of users hadn’t used PFM and worse, 58% of them were not kicked about using it. Of the rest who had used it, only half did on a bank site. While there are multiple reasons for this lack of adoption, some are glaringly obvious. While pretty graphs and pie charts are important to provide a visual representation of my income and expense, it is simply not enough to encourage me to return. Static representation of data without any insightful analysis does not help me. Budgeting and Cash Flow is important but when I have an operative account, a couple of savings accounts, a mortgage loan and a couple of credit cards help me with what my affordability is in specific contexts rather than telling me I just busted my budget. Help me with relative importance of each budget category so that I know it is fine to go over budget on books for my daughter as against going over budget on eating out. Budget over runs and spend analysis are post facto and I am informed of my sins only when I return to online banking. That too, only if I decide to come to the PFM area. Fundamentally, PFM should be a part of my banking engagement rather than an analysis tool. It should be contextual so that I can make insight based decisions. So what can be done to resuscitate PFM? Amalgamation with banking activities – In most cases, PFM tools are integrated into online banking pages and they are like chapter 37 of a long story. PFM needs to be a way of banking rather than a tool. Available balances should shift to Spendable Balances. Budget and goal related insights should be integrated with transaction sessions to drive pre-event financial decisions. Personal Financial Guidance - Banks need to think ground level and see if their PFM offering is really helping customers achieve self actualisation. Banks need to recognise that most customers out there are non-proficient about making the best value of their money. Customers return when they know that they are being guided rather than being just informed on their finance. Integrating contextual financial offers and financial planning into PFM is one way ahead. Yet another way is to help customers tag unwanted spending thereby encouraging sound savings habits. Mobile PFM – Most banks have left all those numbers on online banking. With access mostly having moved to devices and the success of apps, moving PFM on to devices will give it a much needed shot in the arm. This is not only about presenting the same wine in a new bottle but also about leveraging the power of the device in pushing real time notifications to make pre-purchase decisions. The pursuit should be to analyse spend, budgets and financial goals real time and push them pre-event on to the device. So next time, I should know that I have over run my eating out budget before walking into that burger joint and not after. Increase participation and collaboration – Peer group experiences and comments are valued above those offered by the bank. Integrating social media into PFM engagement will let customers share and solicit their financial management experiences with their peer group. Peer comparisons help benchmark one’s savings and spending habits with those of the peer group and increases stickiness. While mature markets have gone through this learning in some way over the last one year, banks in maturing digital banking economies increasingly seem to be falling into this trap. Best practices lie in profiling and segmenting customers, being where they are and contextually guiding them to identify and achieve their financial goals. Banks could look at the likes of Simple and Movenbank to draw inpiration from.

    Read the article

  • Grub Rescue Unknown Filesystem Error. Grub Corrupted or Filesystem?

    - by nightcrawler
    Now it has happened twice & have been pulling my hairs now... I have installed xubuntu on my external hardisk & have been using it for about 3 months. It has three partitions, one of 500 mb mounted at /boot, 2nd one of 48gb mounted at / & the rest (out of 160gb) is ntfs partition....used as normal external storage. The last storage supposedly acts as a buffer b/w Linux distributions & Win platform, buffer in the sense that it provides a universal channel for data transfers. I have constantly used this external hardisk for data transfers b/w win7 laptop & xubuntu (on this external hd) without any hassle. However, on of my desktops where I have ubuntu I (for the first time) attached this external drive which let me do data transfers where all three partitions properly mounted....but then nasty thing occurred the same that occurred before. I (as usual) tried booting via this external hd (one having xubuntu, one having being formerly used under Ubuntu) I got error Now I am totally devastated because similar thing happened ~6months before when I had fedora 17 in my external hd (instead of xubuntu) & after it was used under ubuntu the same happened...i didn't reported it because I already had planned towards debian instead of rpm! The mystery is that as long as I don't attach this external hd under ubuntu the data never** corrupts whereas under win xp/7 I can use it as a normal usb storage of coarse linux partitions aren’t available under win platforms... **From corrupts I mean hd fails to boot with the error mentioned however cant say whether data within remains untouched? It seems that my grub & or MBR is corrupted. Please sir guide me to solve this issue also why I cant attach & use linux external hds under linux platform Disk /dev/sdc: 160.0 GB, 160041884672 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581806 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004e7d0 Device Boot Start End Blocks Id System /dev/sdc1 * 2048 976895 487424 83 Linux /dev/sdc2 978942 96874495 47947777 5 Extended /dev/sdc3 96874496 312575999 107850752 7 HPFS/NTFS/exFAT /dev/sdc5 978944 94726143 46873600 83 Linux /dev/sdc6 94728192 96874495 1073152 82 Linux swap / Solaris I can recall for sure that have seen a thread here when a similar problem occurred & in response someone gave solution of how to mount (now invisible) partitions & recover important data in them. I have misplaced that URL so if any can guide me thither because my important documents resides in / partition What I already have done: Without success I have tried this & related solutions What I plan to do: I believe that filesystem has corrupted & would you recommend solution like this provided I cant recall whether my /boot (500mb) partition was ext4 or ext2 though I am sure that my / (48gb) partition was ext4 UPDATE 1 Attached my external hd under Ubuntu ran followinf command as root grub-install /dev/sdc where /dev/sdc was my external hd containing corrupted xubuntu....it reported all done! I re-ran fdisk -l but to my disappointment it reported Disk /dev/sdc: 160.0 GB, 160041884672 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581806 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1b6b9167 Disk /dev/sdc doesn't contain a valid partition table ...& now I can't even access its ntfs partition (former /dev/sdc3) please help? UPDATE 2 TestDisk (by cgsecurity) failed at founding any partition table :( TestDisk 6.13, Data Recovery Utility, November 2011 Christophe GRENIER <[email protected]> http://www.cgsecurity.org Disk /dev/sdc - 160 GB / 149 GiB - CHS 19457 255 63 Partition Start End Size in sectors

    Read the article

  • Nokia Lumia 920 Windows Phone 8 Announcement

    - by Tim Murphy
    Today Nokia and Microsoft had an event to officially introduce the Lumia 920.  Below is a rundown of some of the things I found interesting. As a person who likes photography there was a lot to drool over.  The main feature that caught my attention was PureView with its optical stabilization.  This alone should improve the majority of you pictures.  Add to that the SmartShoot Object remover that uses multiple images to remove unwanted people or objects that move through your picture and you never have to accept reality again. For the most part the lenses concept introduced in Windows Phone 8 just makes the usability of leveraging camera better.  Of course that is Microsoft’s selling point.  One lens that caught my attention was the Bing lens.  I have to say it is about time that we can take pictures and use them to search for answers using Bing. There were a couple of features shown that involved augmented reality.  One was similar to the yapf application that is already in the market which overlays restaurants and other destination over live camera views.  The other was using the navigation directions with a live view. Then you get down to some of the physical features of the Lumia 920.  The one that got the most stage time is that it has a great 2000mah battery which can be charged wirelessly.  They also pointed out the improved glare reduction of the 4.5 in. curved glass screen.  This hardware improvement is improved further with software that detects glare conditions and adjusts the display attributes to enhance viewing ease. Adding to the wireless cool factor of the Lumia 920 is the general NFC capabilities.  This was demonstrated with NFC docking stations as well as JBL speakers and headphones. There was one more hardware feature that I applauded.  The super sensitive touch screen did away with one of my pet peeves with capacitive touch screens.  You will never have to remove you gloves to operate your phone again.  The mittens that they did the demo with looked more like boxing gloves. I was disappointed with Joe Belfiore said that they were only going to show a couple of new features of the Windows Phone 8 and would hear more at future events.  One of the things he did show is the ability to customize which buttons you preferred as defaults in IE10.  For example you could have the folders button where the refresh button normally is.  He also showed that at long last you can natively take screenshots on your phone.  Hopefully he will be back quickly to give us the rest of the features. The most disappointing part of the event was that we never found out when they would be released or how much they would cost.  Let’s hope this comes soon.  Even with these couple of items still left on my wish list I can’t wait to get my hands on a Lumia 920.  del.icio.us Tags: Windows Phone,Windows Phone 8,Nokia,Lumia,Lumia 920,Microsoft

    Read the article

  • Generate texture for a heightmap

    - by James
    I've recently been trying to blend multiple textures based on the height at different points in a heightmap. However i've been getting poor results. I decided to backtrack and just attempt to recreate one single texture from an SDL_Surface (i'm using SDL) and just send that into opengl. I'll put my code for creating the texture and reading the colour values. It is a 24bit TGA i'm loading, and i've confirmed that the rest of my code works because i was able to send the surfaces pixels directly to my createTextureFromData function and it drew fine. struct RGBColour { RGBColour() : r(0), g(0), b(0) {} RGBColour(unsigned char red, unsigned char green, unsigned char blue) : r(red), g(green), b(blue) {} unsigned char r; unsigned char g; unsigned char b; }; // main loading code SDLSurfaceReader* reader = new SDLSurfaceReader(m_renderer); reader->readSurface("images/grass.tga"); // new texture unsigned char* newTexture = new unsigned char[reader->m_surface->w * reader->m_surface->h * 3 * reader->m_surface->w]; for (int y = 0; y < reader->m_surface->h; y++) { for (int x = 0; x < reader->m_surface->w; x += 3) { int index = (y * reader->m_surface->w) + x; RGBColour colour = reader->getColourAt(x, y); newTexture[index] = colour.r; newTexture[index + 1] = colour.g; newTexture[index + 2] = colour.b; } } unsigned int id = m_renderer->createTextureFromData(newTexture, reader->m_surface->w, reader->m_surface->h, RGB); // functions for reading pixels RGBColour SDLSurfaceReader::getColourAt(int x, int y) { Uint32 pixel; Uint8 red, green, blue; RGBColour rgb; pixel = getPixel(m_surface, x, y); SDL_LockSurface(m_surface); SDL_GetRGB(pixel, m_surface->format, &red, &green, &blue); SDL_UnlockSurface(m_surface); rgb.r = red; rgb.b = blue; rgb.g = green; return rgb; } // this function taken from SDL documentation // http://www.libsdl.org/cgi/docwiki.cgi/Introduction_to_SDL_Video#getpixel Uint32 SDLSurfaceReader::getPixel(SDL_Surface* surface, int x, int y) { int bpp = m_surface->format->BytesPerPixel; Uint8 *p = (Uint8*)m_surface->pixels + y * m_surface->pitch + x * bpp; switch (bpp) { case 1: return *p; case 2: return *(Uint16*)p; case 3: if (SDL_BYTEORDER == SDL_BIG_ENDIAN) return p[0] << 16 | p[1] << 8 | p[2]; else return p[0] | p[1] << 8 | p[2] << 16; case 4: return *(Uint32*)p; default: return 0; } } I've been stumped at this, and I need help badly! Thanks so much for any advice.

    Read the article

  • Virtualized data centre&ndash;Part three: Architecture

    - by marc dekeyser
    Having the basics (like discussed in the previous articles) is all good and well, but how do we get started on this?! It can be quite daunting after all!   From my own point of view I can absolutely confirm your worries and concerns, but also tell you that it is not as hard as it seems! Deciding on what kind of motherboard to buy, processor and how much memory is an activity you will spend quite some time doing research on. And that is not even mentioning storage! All in all it comes down to setting you expectations and your budget. Probably adjusting your expectations according to your budget :). Processors As a rule of thumb you want VT-D (virtualization) technology built in to the processor allowing you to have 64 bit machines running on your host. Memory The more the better! If you are building a home lab don’t bother with ECC unless you are going to run machines that absolutely should be on all the time and your comfort depends on it! Motherboard Depends on what you are going to do with storage: If you are going the NAS way then the number of SATA port/RAID capabilities do not really matter. If you decide to have a single server with lots of dedicated storage it obviously matters how much SATA ports you will have, alternatively you could use a RAID controller (but these set you back a pretty penny if you want one. DELL 6i’s are usually available for a good bargain if you can find one!). Easiest is to get one with a built-in graphics card (on-board) as you are just adding more heat, power usage and possible points of failure. Networking Just like your choice of motherboard the networking side tends to depend on how you want to go. A single virtualization  host with local storage can usually get away with having a single network card, a cluster or server which uses iSCSI storage tends to have more than one teamed up :). Storage The dreaded beast from the dark! The horror which lives in the forest! The most difficult decision you are going to make in the building of your lab. Why you might ask? Simple my friend, having the right choice of storage can make or break your virtualization solution. The performance of you storage choice will have an important impact on the responsiveness of your virtual machines and the deployment of new machines. It also makes a run with your budget! If you decide to go the NAS route you will be dropping a lot more money than if you would be having just a bunch of disks sitting in a server and manually distributing the virtual machines over the disks. Platform I’m a Microsoftee so Hyper-V is a dead giveaway for me. If you are interested in using VMware I won’t stop you but the rest of my posts will be oriented on Server 2012 Hyper-V (aka 3.0)! What did I use? Before someone asks me this in the comments I’ll give you a quick run down of what I am using. - Intel 2.4 quad core processors (i something something) - 24 GB DDR3 Memory - Single disk in each server (might look at this as I move the servers to 2012) - Synology DS1812+ NAS - 3 network interfaces where possible - HP1800 procurve managed switch I decided to spring for the NAS as I will also be using it for backups and media storage (which is working out quite nicely with my Xbox 360 I must say). At the time of building my 2 boxes (over a year and a half ago) these set me back about 900 euros each so I can image you can build the same or better for a lower price. Next article will be diagramming what I want to achieve and starting a build on the Hyper V 3.0 cluster!

    Read the article

  • Antenna Aligner Part 7: Connecting the dots

    - by Chris George
    The app is basically ready, so I eagerly started to sort out creating the application entry in iTunes Connect. It's mostly intuitive actually, although I did have to create yet another icon for iTunes sized 512x512 pixels, damn lucky I did the original graphics as vector! It took me longer to write the application description than anything else, I'm so not a tech author! I didn't like the way you have to 'make up' an SKU (Stock Keeping Unit) number. I have to do some googling to find out that it really doesn't matter what it is! It should be more obvious what to do from the actual website itself. That aside, the rest of it was actually fairly straightforward. As well as the details of the application, iPhone and iPad screenshots were also required. This posed somewhat of a problem. The iPhone ones were easy (as I have one!), but I do not (yet) own an iPad . So I thought I'd leave the iPad screenshots out for now. Once the application details were sorted, I moved onto the rights and pricing. At the start of the project I had made the decision that I wouldn't charge any more than the lowest amount £0.59. I believe there is a market for this, but as my first foray into app development I didn't want to take the mick. I did realise, however, that I had built my app with a developer certificate and provisioning profile. This was fairly quickly corrected, and again Nomad made this very easy to switch over to the distribution certificate and provisioning profile. With a sense of excitement I cracked open iTunes connect and clicked the upload button ... ...slight snag... . when the Nomad project was started, Apple allowed uploads of these binaries via iTunes Connect. But this is no longer possible, the only upload path is via the Application Loader available from the Apple Developer program. This itself has one limitation, it only runs on a mac! D'OH!!!  Actually my language was somewhat more colourful when this fact came to light. After picking my laptop up off the floor and putting it back together... ok only joking, but I did nearly throw it out of frustration!... I started to consider the options; I briefly entertained the idea of buying a cheap mac from ebay... no, that defeats the whole object of what I'm doing, plus my wife wouldn't be impressed there are some guys out there in the interweb who will upload your app for a small fee...but I don't really like the idea of giving some faceless email address my apple developer login details, as well as my app binary! find some willing friend with a mac who would kindly let me use it... obviously this is the only sensible option. In the meantime, I informed the Nomad team about this slight 'issue' and they are currently investigating possible solutions...

    Read the article

  • It happens only at Devoxx ...

    - by arungupta
    After attending several Java conferences world wide, this was my very first time at Devoxx. Here are some items I found that happens only at Devoxx ... Pioneers of theater-style seating - This not only provides comfortable seating for each attendee but the screens are very clearly visible to everybody in the room. Intellectual level of attendees is very high - Read more explanation on the Java EE 6 lab blog. In short, a lab, 1/3 of the content delivered at Devoxx 2011, could not be completed at other developer days in more than 1/3 the time. Snack box for lunches - Even though this suits well to the healthy lifestyle of multiple-snacks-during-a-day style but leaves attendees hungry sooner in the day. The longer breaks before the next snack in the evening does not help at all. Fortunately, Azure cupcakes and Android ice creams turned out to be handy. I finally carried my own apple :-) Wrist band instead of lanyard - The good part about this is that once tied to your hand then you are less likely to forget in your room. But OTOH you are a pretty much a branded conference attendee all through out the city. It was cost effective as it costed 20c as opposed to 1 euro for the lanyard. Live streaming from theater #8 (the biggest room) on parleys.com All talks recorded and released on parleys.com over next year. This allows attendees to not to miss any session and watch replay at their own leisure. Stephan promised to start sharing the sessions by mid December this year. No need to pre-register for a session - This is true for most of the conferences but bigger rooms (+ overflow room for key sessions) provide sufficient space for all those who want to attend the session. And of course all sessions are available on parleys.com anyway! Community votes on whiteboard - Devoxx attendees gets a chance to vote on topics ranging from their favorite non-Java language, operating system, or love from Oracle. Captured pictures at the end of Day 2 are shown below. Movie on the last but one night - This year it was The Adventures of Tintin and was lots of fun. Fries with mayo - This is a typical Belgian thing. Guys going in ladies room to avoid the long queues ... wow! Tweet wall everywhere and I mean literally everywhere, in rooms, hallways, front desk, and other places. The tweet picking algorithm was not very clear as I never saw my tweet appear on the wall ;-) You can also watch it at wall.devoxx.com. Cozy speaker dinner with great food and wine List of parallel and upcoming sessions displayed on the screen - This makes the information more explicit with the attendees. REST API with multiple mobile clients - This API is also used by some other conferences as well. And there always is iphone.devoxx.com. Steering committee members were recognized multiple times. The committee members were clearly identifiable wearing red hoodies. The wireless SSID was intuitive "Devoxx" but hidden to avoid some crap from Microsoft Windows. All of 9000 addresses were used up most of the times with each attendee having multiple devices. A 1 GB fibre optic cable was stretched to Metropolis to support the required network bandwidth. Stephan is already planning to upgrade the equipment and have a better infrastructure next year. Free water, soda, juice in a cooler Kinect connected to TV screens so that attendees can use their hands to browse through the list of sesssions. #devoxxblog, #devoxxwomen, #devoxxfrance, #devoxxgreat, #devoxxsuggestions And Devoxx attendees are called Devoxxians ... how cool is that ? :-) What other things do you think happen only at Devoxx ? And now the pictures from the community whiteboard: And a more complete album (including bigger pics of community votes) is available below:

    Read the article

  • Controlling soft errors and false alarms in SSIS

    - by Jim Giercyk
    If you are like me, you dread the 3AM wake-up call.  I would say that the majority of the pages I get are false alarms.  The alerts that require action often require me to open an SSIS package, see where the trouble is and try to identify the offending data.  That can be very time-consuming and can take quite a chunk out of my beauty sleep.  For those reasons, I have developed a simple error handling scenario for SSIS which allows me to rest a little easier.  Let me first say, this is a high level discussion; getting into the nuts and bolts of creating each shape is outside the scope of this document, but if you have an average understanding of SSIS, you should have no problem following along. In the Data Flow above you can see that there is a caution triangle.  For the purpose of this discussion I am creating a truncation error to demonstrate the process, so this is to be expected.  The first thing we need to do is to redirect the error output.  Double-clicking on the Query shape presents us with the properties window for the input.  Simply set the columns that you want to redirect to Redirect Row in the dropdown box and hit Apply. Without going into a dissertation on error handling, I will just note that you can decide which errors you want to redirect on Error and on Truncation.  Therefore, to override this process for a column or condition, simply do not redirect that column or condition. The next thing we want to do is to add some information about the error; specifically, the name of the package which encountered the error and which step in the package wrote the record to the error table.  REMEMBER: If you redirect the error output, your package will not fail, so you will not know where the error record was created without some additional information.    I added 3 columns to my error record; Severity, Package Name and Step Name.  Severity is just a free-form column that you can use to note whether an error is fatal, whether the package is part of a test job and should be ignored, etc.  Package Name and Step Name are system variables. In my package I have created a truncation situation, where the firstname column is 50 characters in the input, but only 4 characters in the output.  Some records will pass without truncation, others will be sent to the error output.  However, the package will not fail. We can see that of the 14 input rows, 8 were redirected to the error table. This information can be used by another step or another scheduled process or triggered to determine whether an error should be sent.  It can also be used as a historical record of the errors that are encountered over time.  There are other system variables that might make more sense in your infrastructure, so try different things.  Date and time seem like something you would want in your output for example.  In summary, we have redirected the error output from an input, added derived columns with information about the errors, and inserted the information and the offending data into an error table.  The error table information can be used by another step or process to determine, based on the error information, what level alert must be sent.  This will eliminate false alarms, and give you a head start when a genuine error occurs.

    Read the article

  • Rebuilding CoasterBuzz, Part II: Hot data objects

    - by Jeff
    This is the second post, originally from my personal blog, in a series about rebuilding one of my Web sites, which has been around for 12 years. More: Part I: Evolution, and death to WCF After the rush to get moving on stuff, I temporarily lost interest. I went almost two weeks without touching the project, in part because the next thing on my backlog was doing up a bunch of administrative pages. So boring. Unfortunately, because most of the site's content is user-generated, you need some facilities for editing data. CoasterBuzz has a database full of amusement parks and roller coasters. The entities enjoy the relationships that you would expect, though they're further defined by "instances" of a coaster, to define one that has moved between parks as one, with different names and operational dates. And of course, there are pictures and news items, too. It's not horribly complex, except when you have to account for a name change and display just the newest name. In all previous versions, data access was straight SQL. As so much of the old code was rooted in 2003, with some changes in 2008, there wasn't much in the way of ORM frameworks going on then. Let me rephrase that, I mostly wasn't interested in ORM's. Since that time, I used a little LINQ to SQL in some projects, and a whole bunch of nHibernate while at Microsoft. Through all of that experience, I have to admit that these frameworks are often a bigger pain in the ass than not. They're great for basic crud operations, but when you start having all kinds of exotic relationships, they get difficult, and generate all kinds of weird SQL under the covers. The black box can quickly turn into a black hole. Sometimes you end up having to build all kinds of new expertise to do things "right" with a framework. Still, despite my reservations, I used the newer version of Entity Framework, with the "code first" modeling, in a science project and I really liked it. Since it's just a right-click away with NuGet, I figured I'd give it a shot here. My initial effort was spent defining the context class, which requires a bit of work because I deviate quite a bit from the conventions that EF uses, starting with table names. Then throw some partial querying of certain tables (where you'll find image data), and you're splitting tables across several objects (navigation properties). I won't go into the details, because these are all things that are well documented around the Internet, but there was a minor learning curve there. The basics of reading data using EF are fantastic. For example, a roller coaster object has a park associated with it, as well as a number of instances (if it was ever relocated), and there also might be a big banner image for it. This is stupid easy to use because it takes one line of code in your repository class, and by the time you pass it to the view, you have a rich object graph that has everything you need to display stuff. Likewise, editing simple data is also, well, simple. For this goodness, thank the ASP.NET MVC framework. The UpdateModel() method on the controllers is very elegant. Remember the old days of assigning all kinds of properties to objects in your Webforms code-behind? What a time consuming mess that used to be. Even if you're not using an ORM tool, having hydrated objects come off the wire is such a time saver. Not everything is easy, though. When you have to persist a complex graph of objects, particularly if they were composed in the user interface with all kinds of AJAX elements and list boxes, it's not just a simple matter of submitting the form. There were a few instances where I ended up going back to "old-fashioned" SQL just in the interest of time. It's not that I couldn't do what I needed with EF, it's just that the efficiency, both my own and that of the generated SQL, wasn't good. Since EF context objects expose a database connection object, you can use that to do the old school ADO.NET stuff you've done for a decade. Using various extension methods from POP Forums' data project, it was a breeze. You just have to stick to your decision, in this case. When you start messing with SQL directly, you can't go back in the same code to messing with entities because EF doesn't know what you're changing. Not really a big deal. There are a number of take-aways from using EF. The first is that you write a lot less code, which has always been a desired outcome of ORM's. The other lesson, and I particularly learned this the hard way working on the MSDN forums back in the day, is that trying to retrofit an ORM framework into an existing schema isn't fun at all. The CoasterBuzz database isn't bad, but there are design decisions I'd make differently if I were starting from scratch. Now that I have some of this stuff done, I feel like I can start to move on to the more interesting things on the backlog. There's a lot to do, but at least it's fun stuff, and not more forms that will be used infrequently.

    Read the article

  • Getting the number of fragments which passed the depth test

    - by Etan
    In "modern" environments, the "NV Occlusion Query" extension provides a method to get the number of fragments which passed the depth test. However, on the iPad / iPhone using OpenGL ES, the extension is not available. What is the most performant approach to implement a similar behaviour in the fragment shader? Some of my ideas: Render the object completely in white, then count all the colors together using a two-pass shader where first a vertical line is rendered and for each fragment the shader computes the sum over the whole row. Then, a single vertex is rendered whose fragment sums all the partial sums of the first pass. Doesn't seem to be very efficient. Render the object completely in white over a black background. Downsample recursively, abusing the hardware linear interpolation between textures until being at a reasonably small resolution. This leads to fragments which have a greyscale level depending on the number of white pixels where in their corresponding region. Is this even accurate enough? Use mipmaps and simply read the pixel on the 1x1 level. Again the question of accuracy and if it is even possible using non-power-of-two textures. The problem wit these approaches is, that the pipeline gets stalled which results in major performance issues. Therefore, I'm looking for a more performant way to accomplish my goal. Using the EXT_OCCLUSION_QUERY_BOOLEAN extension Apple introduced EXT_OCCLUSION_QUERY_BOOLEAN in iOS 5.0 for iPad 2. "4.1.6 Occlusion Queries Occlusion queries use query objects to track the number of fragments or samples that pass the depth test. An occlusion query can be started and finished by calling BeginQueryEXT and EndQueryEXT, respectively, with a target of ANY_SAMPLES_PASSED_EXT or ANY_SAMPLES_PASSED_CONSERVATIVE_EXT. When an occlusion query is started with the target ANY_SAMPLES_PASSED_EXT, the samples-boolean state maintained by the GL is set to FALSE. While that occlusion query is active, the samples-boolean state is set to TRUE if any fragment or sample passes the depth test. When the occlusion query finishes, the samples-boolean state of FALSE or TRUE is written to the corresponding query object as the query result value, and the query result for that object is marked as available. If the target of the query is ANY_SAMPLES_PASSED_CONSERVATIVE_EXT, an implementation may choose to use a less precise version of the test which can additionally set the samples-boolean state to TRUE in some other implementation dependent cases." The first sentence hints on a behavior which is exactly what I'm looking for: getting the number of pixels which passed the depth test in an asynchronous manner without much performance loss. However, the rest of the document describes only how to get boolean results. Is it possible to exploit this extension to get the pixel count? Does the hardware support it so that there may be hidden API to get access to the pixel count? Other extensions which could be exploitable would be debugging features like the number of times the fragment shader was invoked (PSInvocations in DirectX - not sure if something simila is available in OpenGL ES). However, this would also result in a pipeline stall.

    Read the article

  • SharePoint For Newbie Developers: Code Scope

    - by Mark Rackley
    So, I continue to try to come up with diagrams and information to help new SharePoint developers wrap their heads around this SharePoint beast, especially when those newer to development are on my team. To that end, I drew up the below diagram to help some of our junior devs understand where/when code is being executed in SharePoint at a high level. Note that I say “High Level”… This is a simplistic diagram that can get a LOT more complicated if you want to dive in deeper.  For the purposes of my lesson it served its purpose well. So, please no comments from you peanut gallery about information 3 levels down that’s missing unless it adds to the discussion.  Thanks So, the diagram below details where code is executed on a page load and gives the basic flow of the page load. There are actually many more steps, but again, we are staying high level here. I just know someone is still going to say something like “Well.. actually… the dlls are getting executed when…”  Anyway, here’s the diagram with some information I like to point out: Code Scope / Where it is executed So, looking at the diagram we see that dlls and XSL are executed on the server and that JavaScript/jQuery are executed on the client. This is the main thing I like to point out for the following reasons: XSL (for the most part) is faster than JavaScript I actually get this question a lot. Since XSL is executed on the server less data is getting passed over the wire and a beefier machine (hopefully) is doing the processing. The outcome of course is better performance. When You are using jQuery and making Web Service calls you are building XML strings and sending them to the server, then ALL the results come back and the client machine has to parse through the XML and use what it needs and ignore the rest (and there is a lot of garbage that comes back from SharePoint Web Service calls). XSL and JavaScript cannot work together in the same scope Let me clarify. JavaScript can send data back to SharePoint in postbacks that XSL can then use. XSL can output JavaScript and initiate JavaScript variables.  However, XSL cannot call a JavaScript method to get a value and JavaScript cannot directly interact with XSL and call its templates. They are executed in there scope only. No crossing of boundaries here. So, what does this all mean? Well, nothing too deep. This is just some basic fundamental information that all SharePoint devs need to understand. It will help you determine what is the best solution for your specific development situation and it will help the new guys understand why they get an error when trying to call a JavaScript Function from within XSL.  Let me know if you think quick little blogs like this are helpful or just add to the noise. I could probably put together several more that are similar.  As always, thanks for stopping by, hope you learned something new.

    Read the article

  • Head in the Clouds

    - by Tony Davis
    We're just past the second anniversary of the launch of Windows Azure. A couple of years' experience with Azure in the industry has provided some obvious success stories, but has deflated some of the initial marketing hyperbole. As a general principle, Azure seems to work well in providing a Service-Oriented Architecture for services in enterprises that suffer wide fluctuations in demand. Instead of being obliged to provide hardware sufficient for the occasional peaks in demand, one can hire capacity only when it is needed, and the cost of hosting an application is no longer a capital cost. It enables companies to avoid having to scale out hardware for peak periods only to see it underused for the rest of the time. A customer-facing application such as a concert ticketing system, which suffers high demand in short, predictable bursts of activity, is a great example of an application that would work well in Azure. However, moving existing applications to Azure isn't something to be done on impulse. Unless your application is .NET-based, and consists of 'stateless' components that communicate via queues, you are probably in for a lot of redevelopment work. It makes most sense for IT departments who are already deep in this .NET mindset, and who also want 'grown-up' methods of staging, testing, and deployment. Azure fits well with this culture and offers, as a bonus, good Visual Studio integration. The most-commonly stated barrier to porting these applications to Azure is the problem of reconciling the use of the cloud with legislation for data privacy and security. Putting databases in the cloud is a sticky issue for many and impossible for some due to compliance and security issues, the need for direct control over data, and so on. In the face of feedback from the early adopters of Azure, Microsoft has broadened the architectural choices to cater for a wide range of requirements. As well as SQL Azure Database (SAD) and Azure storage, the unstructured 'BLOB and Entity-Attribute-Value' NoSQL storage alternative (which equates more closely with folders and files than a database), Windows Azure offers a wide range of storage options including use of services such as oData: developers who are programming for Windows Azure can simply choose the one most appropriate for their needs. Secondly, and crucially, the Windows Azure architecture allows you the freedom to produce hybrid applications, where only those parts that need cloud-based hosting are deployed to Azure, whereas those parts that must unavoidably be hosted in a corporate datacenter can stay there. By using a hybrid architecture, it will seldom, if ever, be necessary to move an entire application to the cloud, along with personal and financial data. For example that we could port to Azure only put those parts of our ticketing application that capture and process tickets orders. Once an order is captured, the financial side can be processed in our own data center. In short, Windows Azure seems to be a very effective way of providing services that are subject to wide but predictable fluctuations in demand. Have you come to the same conclusions, or do you think I've got it wrong? If you've had experience with Azure, would you recommend it? It would be great to hear from you. Cheers, Tony.

    Read the article

  • Rebuilding CoasterBuzz, Part IV: Dependency injection, it's what's for breakfast

    - by Jeff
    (Repost from my personal blog.) This is another post in a series about rebuilding one of my Web sites, which has been around for 12 years. I hope to relaunch soon. More: Part I: Evolution, and death to WCF Part II: Hot data objects Part III: The architecture using the "Web stack of love" If anything generally good for the craft has come out of the rise of ASP.NET MVC, it's that people are more likely to use dependency injection, and loosely couple the pieces parts of their applications. A lot of the emphasis on coding this way has been to facilitate unit testing, and that's awesome. Unit testing makes me feel a lot less like a hack, and a lot more confident in what I'm doing. Dependency injection is pretty straight forward. It says, "Given an instance of this class, I need instances of other classes, defined not by their concrete implementations, but their interfaces." Probably the first place a developer exercises this in when having a class talk to some kind of data repository. For a very simple example, pretend the FooService has to get some Foo. It looks like this: public class FooService {    public FooService(IFooRepository fooRepo)    {       _fooRepo = fooRepo;    }    private readonly IFooRepository _fooRepo;    public Foo GetMeFoo()    {       return _fooRepo.FooFromDatabase();    } } When we need the FooService, we ask the dependency container to get it for us. It says, "You'll need an IFooRepository in that, so let me see what that's mapped to, and put it in there for you." Why is this good for you? It's good because your FooService doesn't know or care about how you get some foo. You can stub out what the methods and properties on a fake IFooRepository might return, and test just the FooService. I don't want to get too far into unit testing, but it's the most commonly cited reason to use DI containers in MVC. What I wanted to mention is how there's another benefit in a project like mine, where I have to glue together a bunch of stuff. For example, when I have someone sign up for a new account on CoasterBuzz, I'm actually using POP Forums' new account mailer, which composes a bunch of text that includes a link to verify your account. The thing is, I want to use custom text and some other logic that's specific to CoasterBuzz. To accomplish this, I make a new class that inherits from the forum's NewAccountMailer, and override some stuff. Easy enough. Then I use Ninject, the DI container I'm using, to unbind the forum's implementation, and substitute my own. Ninject uses something called a NinjectModule to bind interfaces to concrete implementations. The forum has its own module, and then the CoasterBuzz module is loaded second. The CB module has two lines of code to swap out the mailer implementation: Unbind<PopForums.Email.INewAccountMailer>(); Bind<PopForums.Email.INewAccountMailer>().To<CbNewAccountMailer>(); Piece of cake! Now, when code asks the DI container for an INewAccountMailer, it gets my custom implementation instead. This is a lot easier to deal with than some of the alternatives. I could do some copy-paste, but then I'm not using well-tested code from the forum. I could write stuff from scratch, but then I'm throwing away a bunch of logic I've already written (in this case, stuff around e-mail, e-mail settings, mail delivery failures). There are other places where the DI container comes in handy. For example, CoasterBuzz does a number of custom things with user profiles, and special content for paid members. It uses the forum as the core piece to managing users, so I can ask the container to get me instances of classes that do user lookups, for example, and have zero care about how the forum handles database calls, configuration, etc. What a great world to live in, compared to ten years ago. Sure, the primary interest in DI is around the "separation of concerns" and facilitating unit testing, but as your library grows and you use more open source, it starts to be the glue that pulls everything together.

    Read the article

  • The Future of Air Travel: Intelligence and Automation

    - by BobEvans
    Remember those white-knuckle flights through stormy weather where unexpected plunges in altitude result in near-permanent relocations of major internal organs? Perhaps there’s a better way, according to a recent Wall Street Journal article: “Pilots of a Honeywell International Inc. test plane stayed on their initial flight path, relying on the company's latest onboard radar technology to steer through the worst of the weather. The specially outfitted Boeing 757 barely shuddered as it gingerly skirted some of the most ferocious storm cells over Fort Walton Beach and then climbed above the rest in zero visibility.” Or how about the multifaceted check-in process, which might not wreak havoc on liver location but nevertheless makes you wonder if you’ve been trapped in some sort of covert psychological-stress test? Another WSJ article, called “The Self-Service Airport,” says there’s reason for hope there as well: “Airlines are laying the groundwork for the next big step in the airport experience: a trip from the curb to the plane without interacting with a single airline employee. At the airport of the near future, ‘your first interaction could be with a flight attendant,’ said Ben Minicucci, chief operating officer of Alaska Airlines, a unit of Alaska Air Group Inc.” And in the topsy-turvy world of air travel, it’s not just the passengers who’ve been experiencing bumpy rides: the airlines themselves are grappling with a range of challenges—some beyond their control, some not—that make profitability increasingly elusive in spite of heavy demand for their services. A recent piece in The Economist illustrates one of the mega-challenges confronting the airline industry via a striking set of contrasting and very large numbers: while the airlines pay $7 billion per year to third-party computerized reservation services, the airlines themselves earn a collective profit of only $3 billion per year. In that context, the anecdotes above point unmistakably to the future that airlines must pursue if they hope to be able to manage some of the factors outside of their control (e.g., weather) as well as all of those within their control (operating expenses, end-to-end visibility, safety, load optimization, etc.): more intelligence, more automation, more interconnectedness, and more real-time awareness of every facet of their operations. Those moves will benefit both passengers and the air carriers, says the WSJ piece on The Self-Service Airport: “Airlines say the advanced technology will quicken the airport experience for seasoned travelers—shaving a minute or two from the checked-baggage process alone—while freeing airline employees to focus on fliers with questions. ‘It's more about throughput with the resources you have than getting rid of humans,’ said Andrew O'Connor, director of airport solutions at Geneva-based airline IT provider SITA.” Oracle’s attempting to help airlines gain control over these challenges by blending together a range of its technologies into a solution called the Oracle Airline Data Model, which suggests the following steps: • To retain and grow their customer base, airlines need to focus on the customer experience. • To personalize and differentiate the customer experience, airlines need to effectively manage their passenger data. • The Oracle Airline Data Model can help airlines jump-start their customer-experience initiatives by consolidating passenger data into a customer data hub that drives realtime business intelligence and strategic customer insight. • Oracle’s Airline Data Model brings together multiple types of data that can jumpstart your data-warehousing project with rich out-of-the-box functionality. • Oracle’s Intelligent Warehouse for Airlines brings together the powerful capabilities of Oracle Exadata and the Oracle Airline Data Model to give you real-time strategic insights into passenger demand, revenues, sales channels and your flight network. The airline industry aside, the bullet points above offer a broad strategic outline for just about any industry because the customer experience is becoming pre-eminent in each and there is simply no way to deliver world-class customer experiences unless a company can capture, manage, and analyze all of the relevant data in real-time. I’ll leave you with two thoughts from the WSJ article about the new in-flight radar system from Honeywell: first, studies show that a single episode of serious turbulence can wrack up $150,000 in additional costs for an airline—so, it certainly behooves the carriers to gain the intelligence to avoid turbulence as much as possible. And second, it’s back to that top-priority customer-experience thing and the value that ever-increasing levels of intelligence can deliver. As the article says: “In the cabin, reporters watched screens showing the most intense parts of the nearly 10-mile wide storm, which churned some 7,000 feet below, in vibrant red and other colors. The screens also were filled with tiny symbols depicting likely locations of lightning and hail, which can damage planes and wreak havoc on the nerves of white-knuckle flyers.”  (Bob Evans is senior vice-president, communications, for Oracle.)  

    Read the article

  • Viewport / Camera Calculation in 2D Game

    - by Dave
    we have a 2D game with some sprites and tiles and some kind of camera/viewport, that "moves" around the scene. so far so good, if we wouldn't had some special behaviour for your camera/viewport translation. normally you could stick the camera to your player figure and center it, resulting in a very cheap, undergraduate, translation equation, like : vec_translation -/+= speed (depending in what keys are pressed. WASD as default.) buuuuuuuuuut, we want our player figure be able to actually reach the bounds, when the viewport/camera has reached a maximum translation. we came up with the following solution (only keys a and d are the shown here, the rest is just adaption of calculation or maybe YOUR super-cool and elegant solution :) ): if(keys[A]) { playerX -= speed; if(playerScreenX <= width / 2 && tx < 0) { playerScreenX = width / 2; tx += speed; } else if(playerScreenX <= width / 2 && (tx) >= 0) { playerScreenX -= speed; tx = 0; if(playerScreenX < 0) playerScreenX = 0; } else if(playerScreenX >= width / 2 && (tx) < 0) { playerScreenX -= speed; } } if(keys[D]) { playerX += speed; if(playerScreenX >= width / 2 && (-tx + width) < sceneWidth) { playerScreenX = width / 2; tx -= speed; } if(playerScreenX >= width / 2 && (-tx + width) >= sceneWidth) { playerScreenX += speed; tx = -(sceneWidth - width); if(playerScreenX >= width - player.width) playerScreenX = width - player.width; } if(playerScreenX <= width / 2 && (-tx + width) < sceneWidth) { playerScreenX += speed; } } i think the code is rather self explaining: keys is a flag container for currently active keys, playerX/-Y is the position of the player according to world origin, tx/ty are the translation components vital to background / npc / item offset calculation, playerOnScreenX/-Y is the actual position of the player figure (sprite) on screen and width/height are the dimensions of the camera/viewport. this all looks quite nice and works well, but there is a very small and nasty calculation error, which in turn sums up to some visible effect. let's consider following piece of code: if(playerScreenX <= width / 2 && tx < 0) { playerScreenX = width / 2; tx += speed; } it can be translated into plain english as : if the x position of your player figure on screen is less or equal the half of your display / camera / viewport size AND there is enough space left LEFT of your viewport/camera then set players x position on screen to width half, increase translation (because we subtract the translation from something we want to move). easy, right?! doing this will create a small delta between playerX and playerScreenX. after so much talking, my question appears now here at the bottom of this document: how do I stick the calculation of my player-on-screen to the actual position of the player AND having a viewport that is not always centered aroung the players figure? here is a small test-case in processing: http://pastebin.com/bFaTauaa thank you for reading until now and thank you in advance for probably answering my question.

    Read the article

  • How to fix: Ubuntu 12.04 reboots after loading with elilo

    - by Casey
    I have an HP p6-2120 with CPU: AMD A6-3620 APU with Radeon Graphics RAM: 6GB BIOS: HO2_710.ROM v7.10 [AMI v7.10 4/19/2012] Disk: SATA1 (/dev/sda) - 1 TB (windows) Disk: SATA2 (/dev/sdb) - 1 TB partitioned using "parted -a optimal /dev/sdb" as follows: .. 1049KB 201MB FAT32 boot flag set .. 201MB 60GB ext2 (/) .. 68GB 78GB linux-swap(v1) (swap) .. 78GB 790GB ext4 (/home) .. - rest is "free" space reserved for other purposes (eventually) ubuntu: 12.04.1 LTS [specifically: Release 12.04 (precise) 64-bit] kernel: linux 3.2.0-29-generic I created a bootable EFI USB from the ISO (64-bit) which I downloaded. I can run and install from the USB without any problems. The BIOS is an EFI bios that appears to be capable of booting in either EFI or Legacy mode. Initially, I did the "standard" install with NOTHING on disk2, and let the installer configure everything. The net result of this was that when I started the computer and forced it into "boot" menu mode, it DOES NOT recognize SATA2 as an EFI drive, and when I attempt to "legacy" boot from it, I get the message "ERROR: No Boot Disk has been detected." The "standard" install created one large partition that consumed the entire disk. At that point, I manually partitioned the disk (using sudo parted -a optimal /dev/sdb) as described above. I selected the "other" install, and changed the /dev/sdb1 to "bios_grub", /dev/sdb2 as "/" (ext4), /dev/sdb3 as swap, and /dev/sdb4 as "/home". [Note: fearing that possibly elilo did not recognize ext4, I switched /dev/sdb2 to ext2 and re-insalled] The net result was that the install appeared to trash the /dev/sdb1 partition so that it was NOT readable by anything. I re-formated /dev/sdb1 as FAT32 and set the boot flag. I repeated the install ignoring the messages about no bios_grub partition. After several attempts to get GRUB2 to work, I switched to elilo. I downloaded the most recent version and copied it (elilo-3.14-ia64.efi) to /dev/sdb1/efi/boot/bootx64.efi. (The BIOS boot loader did not recognize it either as elilo-3.14.ia64.efi or as elilo.efi. Based on the advice in one of the web-pages I found, I renamed it to bootx64.efi. This worked.) In that same directory (/efi/boot), I copied the file pointed to the link in /dev/sdb2/vmlinuz to /efi/boot/vmlinuz, and the file pointed to the link in /dev/sdb2/initrd.img to /efi/boot/initrd.img. I created an elilo.conf file as follows: timeout=5000 prompt default=linux-boot image=vmlinuz label=linux-boot read-only initrd=initrd.img root=/dev/sdb2 The /efi/boot directory contains 4 files: bootx64.efi elilo.conf vmlinuz initrd.img When I power-cycle the computer and force the boot menu, drive2 shows up as an EFI bootable drive. When I select it, I get the elilo prompt. Pressing , it appears to load the kernal (I have tried it with verbose=5, and there is a long string of messages with the final one a command line to load the kernel and a series of several dots that fly by) then the screen goes blank, and it reboots the computer. [Note: I have also tried substituting the UUID as found in the /etc/fstab of the installed system for the root directory. This had no effect.] This is a brief synopsis of several nights of fiddling with this. I would deeply appreciate any help you can give.

    Read the article

  • Introduction to WebCenter Personalization: &ldquo;The Conductor&rdquo;

    - by Steve Pepper
    There are some new faces in the town of WebCenter with the latest 11g PS3 release.  A new component has introduced itself as "Oracle WebCenter Personalization", a.k.a WCP, to simplify delivery of a personalized experience and content to end users.  This posting reviews one of the primary components within WCP: "The Conductor". The Conductor: This ain't just an ordinary cloud... One of the founding principals behind WebCenter Personalization was to provide an open client-side API that remains independent of the technology invoking it, in addition to independence from the architecture running it.  The Conductor delivers this, and much, much more. The Conductor is the engine behind WebCenter Personalization that allows flow-based documents, called "Scenarios", to be managed and executed on the server-side through a well published and RESTful api.      The Conductor also supports an extensible model for custom provider integration that can be easily invoked within a Scenario to promote seamless integration with existing business assets. Introducing the Scenario Conductor Scenarios are declarative offline-authored documents using the custom Personalization JDeveloper bundle included with WebCenter.  A Scenario contains one (or more) statements that can: Create variables that are scoped to the current execution context Iterate over collections, or loop until a specific condition is met Execute one or more statements when a condition is met Invoke other scenarios that exist within the same namespace Invoke a data provider that integrates with custom applications Once a variable is assigned within the Scenario's execution context, it can be referenced anywhere within the same Scenario using the common Expression Language syntax used in J2EE web containers. Scenarios are then published and tested to the Integrated WebLogic Server domain, or published remotely to other domains running WebCenter Personalization. Various Client-side Models The Conductor server API is built upon RESTful services that support a wide variety of clients able to communicate over HTTP.  The Conductor supports the following client-side models: REST:  Popular browser-based languages can be used to manage and execute Conductor Scenarios.  There are other public methods to retrieve configured provider metadata that can be used by custom applications. The Conductor currently supports XML and JSON for it's API syntax. Java: WebCenter Personalization delivers a robust and light-weight java client with the popular Jersey framework as it's foundation.  It has never been easier to write a remote java client to manage remote RESTful services. Expression Language (EL): Allow the results of Scenario execution to control your user interface or embed personalized content using the session-scoped managed bean.  The EL client can also be used in straight JSP pages with minimal configuration. Extensible Provider Framework The Conductor supports a pluggable provider framework for integrating custom code with Scenario execution.  There are two types of providers supported by the Conductor: Function Provider: Function Providers are simple java annotated classes with static methods that are meant to be served as utilities.  Some common uses would include: object creation or instantiation, data transformation, and the like.  Function Providers can be invoked using the common EL syntax from variable assignments, conditions, and loops. For example:  ${myUtilityClass:doStuff(arg1,arg2))} If you are familiar with EL Functions, Function Providers are based on the same concept. Data Provider: Like Function Providers, Data Providers are annotated java classes, but they must adhere to a much more strict object model.  Data Providers have access to a wealth of Conductor services, such as: Access to namespace-scoped configuration API that can be managed by Oracle Enterprise Manager, Scenario execution context for expression resolution, and more.  Oracle ships with three out-of-the-box data providers that supports integration with: Standardized Content Servers(CMIS),  Federated Profile Properties through the Properties Service, and WebCenter Activity Graph. Useful References If you are looking to immediately get started writing your own application using WebCenter Personalization Services, you will find the following references helpful in getting you on your way: Personalizing WebCenter Applications Authoring Personalized Scenarios in JDeveloper Using Personalization APIs Externally Implementing and Calling Function Providers Implementing and Calling Data Providers

    Read the article

  • Non-blocking I/O using Servlet 3.1: Scalable applications using Java EE 7 (TOTD #188)

    - by arungupta
    Servlet 3.0 allowed asynchronous request processing but only traditional I/O was permitted. This can restrict scalability of your applications. In a typical application, ServletInputStream is read in a while loop. public class TestServlet extends HttpServlet {    protected void doGet(HttpServletRequest request, HttpServletResponse response)         throws IOException, ServletException {     ServletInputStream input = request.getInputStream();       byte[] b = new byte[1024];       int len = -1;       while ((len = input.read(b)) != -1) {          . . .        }   }} If the incoming data is blocking or streamed slower than the server can read then the server thread is waiting for that data. The same can happen if the data is written to ServletOutputStream. This is resolved in Servet 3.1 (JSR 340, to be released as part Java EE 7) by adding event listeners - ReadListener and WriteListener interfaces. These are then registered using ServletInputStream.setReadListener and ServletOutputStream.setWriteListener. The listeners have callback methods that are invoked when the content is available to be read or can be written without blocking. The updated doGet in our case will look like: AsyncContext context = request.startAsync();ServletInputStream input = request.getInputStream();input.setReadListener(new MyReadListener(input, context)); Invoking setXXXListener methods indicate that non-blocking I/O is used instead of the traditional I/O. At most one ReadListener can be registered on ServletIntputStream and similarly at most one WriteListener can be registered on ServletOutputStream. ServletInputStream.isReady and ServletInputStream.isFinished are new methods to check the status of non-blocking I/O read. ServletOutputStream.canWrite is a new method to check if data can be written without blocking.  MyReadListener implementation looks like: @Overridepublic void onDataAvailable() { try { StringBuilder sb = new StringBuilder(); int len = -1; byte b[] = new byte[1024]; while (input.isReady() && (len = input.read(b)) != -1) { String data = new String(b, 0, len); System.out.println("--> " + data); } } catch (IOException ex) { Logger.getLogger(MyReadListener.class.getName()).log(Level.SEVERE, null, ex); }}@Overridepublic void onAllDataRead() { System.out.println("onAllDataRead"); context.complete();}@Overridepublic void onError(Throwable t) { t.printStackTrace(); context.complete();} This implementation has three callbacks: onDataAvailable callback method is called whenever data can be read without blocking onAllDataRead callback method is invoked data for the current request is completely read. onError callback is invoked if there is an error processing the request. Notice, context.complete() is called in onAllDataRead and onError to signal the completion of data read. For now, the first chunk of available data need to be read in the doGet or service method of the Servlet. Rest of the data can be read in a non-blocking way using ReadListener after that. This is going to get cleaned up where all data read can happen in ReadListener only. The sample explained above can be downloaded from here and works with GlassFish 4.0 build 64 and onwards. The slides and a complete re-run of What's new in Servlet 3.1: An Overview session at JavaOne is available here. Here are some more references for you: Java EE 7 Specification Status Servlet Specification Project JSR Expert Group Discussion Archive Servlet 3.1 Javadocs

    Read the article

  • Bowing to User Experience

    As a consumer of geeky news it is hard to check my Google Reader without running into two or three posts about Apples iPad and in particular the changes to the developer guidelines which seemingly restrict developers to using Apples Xcode tool and Objective-C language for iPad apps. One of the alternatives to Objective-C affected, is MonoTouch, an option with some appeal to me as it is based on the Mono implementation of C#. Seemingly restricted is the key word here, as far as I can tell, no official announcement has been made about its fate. For more details around MonoTouch for iPhone OS, check out Miguel de Icazas post: http://tirania.org/blog/archive/2010/Apr-28.html. These restrictions have provoked some outrage as the perception is that Apple is arrogantly restricting developers freedom to create applications as they choose and perhaps unwittingly shortchanging iPhone/iPad users who wont benefit from these now never-to-be-made great applications. Apples response has mostly been to say they are concentrating on providing a certain user experience to their customers, and to do this, they insist everyone uses the tools they approve. Which isnt a surprising line of reasoning given Apple restricts the hardware used and content of the apps already. The vogue term for this approach is curated, as in a benevolent museum director selecting only the finest artifacts for display or a wise gardener arranging the plants in a garden just so. If this is what a curated experience is like it is hard to argue that consumers are not responding. My iPhone is probably the most satisfying piece of technology I own. Coming from the Razr, it really was an revolution in how the form factor, interface and user experience all tied together. While the curated approach reinvented the smart phone genre, it is easy to forget that this is not a new approach for Apple. Macbooks and Macs are Apple hardware that run Apple software. And theyve been successful, but not quite in the same way as the iPhone or iPad (based on early indications). Why not? Well a curated approach can only be wildly successful if the curator a) makes the right choices and b) offers choices that no one else has. Although its advantages are eroding, the iPhone was different from other phones, a unique, focused, touch-centric experience. The iPad is an attempt to define another category of computing. Macs and Macbooks are great devices, but are not fundamentally a different user experience than a PC, you still have windows, file folders, mouse and keyboard, and similar applications. So the big question for Apple is can they hold on to their market advantage, continuing innovating in user experience and stay on top? Or are they going be like Xerox, and the rest of the world says thank you for the windows metaphor, now let me implement that better? It will be exciting to watch, with Android already a viable competitor and Microsoft readying Windows Phone 7. And to close the loop back to the restrictions on developing for iPhone OS. At this point the main target appears to be Adobe and Adobe Flash. Apples calculation is that a) they dont need those developers or b) the developers they want will learn Apples stuff anyway. My guess is that they are correct; that as much as I like the idea of developers having more options, I am not going to buy a competitors product to spite Apple unless that product is just as usable. For a non-technical consumer, I dont know that this conversation even factors into the buying decision. If it did, wed be talking about how Microsoft is trying to retake a slice of market share from the behemoth that is Linux.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Class design issue

    - by user2865206
    I'm new to OOP and a lot of times I become stumped in situations similar to this example: Task: Generate an XML document that contains information about a person. Assume the information is readily available in a database. Here is an example of the structure: <Person> <Name>John Doe</Name> <Age>21</Age> <Address> <Street>100 Main St.</Street> <City>Sylvania</City> <State>OH</State> </Address> <Relatives> <Parents> <Mother> <Name>Jane Doe</Name> </Mother> <Father> <Name>John Doe Sr.</Name> </Father> </Parents> <Siblings> <Brother> <Name>Jeff Doe</Name> </Brother> <Brother> <Name>Steven Doe</Name> </Brother> </Siblings> </Relatives> </Person> Ok lets create a class for each tag (ie: Person, Name, Age, Address) Lets assume each class is only responsible for itself and the elements directly contained Each class will know (have defined by default) the classes that are directly contained within them Each class will have a process() function that will add itself and its childeren to the XML document we are creating When a child is drawn, as in the previous line, we will have them call process() as well Now we are in a recursive loop where each object draws their childeren until all are drawn But what if only some of the tags need to be drawn, and the rest are optional? Some are optional based on if the data exists (if we have it, we must draw it), and some are optional based on the preferences of the user generating the document How do we make sure each object has the data it needs to draw itself and it's childeren? We can pass down a massive array through every object, but that seems shitty doesnt it? We could have each object query the database for it, but thats a lot of queries, and how does it know what it's query is? What if we want to get rid of a tag later? There is no way to reference them. I've been thinking about this for 20 hours now. I feel like I am misunderstanding a design principle or am just approaching this all wrong. How would you go about programming something like this? I suppose this problem could apply to any senario where there are classes that create other classes, but the classes created need information to run. How do I get the information to them in a way that doesn't seem fucky? Thanks for all of your time, this has been kicking my ass.

    Read the article

< Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >