Search Results

Search found 8850 results on 354 pages for 'xp'.

Page 308/354 | < Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >

• USB device goes to "Unknown device" randomly

  - by ILovePaperTowels

  We have a kiosk that uses a bio scanner from m2sys (usb device). It scans your palm to recognize you. Every so often, maybe 1-3 times a day, the bio scanner will become an unknown device. We are unable to see any patterns or commonalities. When we unplug and plug it back in, it becomes available again. We have custom software that uses the bio scanner's software to communicate with it. We've added a crap load of logging on everything but there doesn't seem to be any pattern of when the thing shuts off. We have these devices deployed to multiple locations (100+) and they are all seeing the issues but we can not reproduce it here, at the main office. I've evaluated the software and I don't see anything. I'm thinking it's a driver or hardware issue (but we can't reproduce the issues here in the main office) or maybe environmental interference of some sort like from scan guns, automatic doors, microwaves or something else. Any ideas would be welcome. I'm looking for possible causes of the usb device becoming unknown or ways to figure out what the cause is. no other usb devices have this issue, only the scanner We've contacted the manufacturer and they blame our software We're getting help from Microsoft, but they haven't found anything OS is embedded XP http://www.m2sys.com/palm-vein-reader.htm

  Read the article

• Windows typeperf and pound signs.

  - by Weegee

  I'm currently trying to use typeperf to access some Windows performance counters. Unfortunately, a few of the instances I'm trying to check are of the format service#1. The command typeperf "\\server\Process(service#1)\Working Set Peak" is unfortunately returning the data for \\server\Process(service)\Working Set Peak rather than the data for the instance service#1. This holds true for any of the services that have pound signs in the counter string. Does anyone know of a method to get around this problem? Sample output: I:\>typeperf -s server "\Process(service#1)\Working Set" "(PDH-CSV 4.0)","\\server\Process(service)\Working Set" "10/08/2009 09:37:29.070","1643274240.000000" "10/08/2009 09:37:30.070","1643274240.000000" "10/08/2009 09:37:31.070","1643274240.000000" The command completed successfully. I:\>typeperf -s server "\Process(service#2)\Working Set" "(PDH-CSV 4.0)","\\server\Process(service)\Working Set" "10/08/2009 09:37:39.273","1643274240.000000" "10/08/2009 09:37:40.273","1643274240.000000" "10/08/2009 09:37:41.273","1643274240.000000" "10/08/2009 09:37:42.273","1643274240.000000" "10/08/2009 09:37:43.273","1643274240.000000" The command completed successfully. I can confirm in PerfMon that the Working Set value "1643274240.000000" is incorrect for both service#1 and service#2. I am running Windows XP Service Pack 2, but a co-worker who is running Windows Server 2003 was having the same troubles.

  Read the article

• Allow access from outside network with dmz and iptables

  - by Ivan

  I'm having a problem with my home network. So my setup is like this: In my Router (using Ubuntu desktop v11.04), I installed squid proxy as my transparent proxy. So I would like to use dyndns to my home network so I could be access my server from the internet, and also I installed CCTV camera and I would like to enable watching it from internet. The problem is I cannot access it from outside the net. I already set DMZ in my modem to my router ip. My first guess is because i'm using iptables to redirect all inside network to use squid. And not allow from outside traffic to my inside network. Here is my iptables script: #!/bin/sh # squid server IP SQUID_SERVER="192.168.5.1" # Interface connected to Internet INTERNET="eth0" # Interface connected to LAN LAN_IN="eth1" # Squid port SQUID_PORT="3128" # Clean old firewall iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X # Load IPTABLES modules for NAT and IP conntrack support modprobe ip_conntrack modprobe ip_conntrack_ftp # For win xp ftp client #modprobe ip_nat_ftp echo 1 > /proc/sys/net/ipv4/ip_forward # Setting default filter policy iptables -P INPUT DROP iptables -P OUTPUT ACCEPT # Unlimited access to loop back iptables -A INPUT -i lo -j ACCEPT iptables -A OUTPUT -o lo -j ACCEPT # Allow UDP, DNS and Passive FTP iptables -A INPUT -i $INTERNET -m state --state ESTABLISHED,RELATED -j ACCEPT # set this system as a router for Rest of LAN iptables --table nat --append POSTROUTING --out-interface $INTERNET -j MASQUERADE iptables --append FORWARD --in-interface $LAN_IN -j ACCEPT # unlimited access to LAN iptables -A INPUT -i $LAN_IN -j ACCEPT iptables -A OUTPUT -o $LAN_IN -j ACCEPT # DNAT port 80 request comming from LAN systems to squid 3128 ($SQUID_PORT) aka transparent proxy iptables -t nat -A PREROUTING -i $LAN_IN -p tcp --dport 80 -j DNAT --to $SQUID_SERVER:$SQUID_PORT # if it is same system iptables -t nat -A PREROUTING -i $INTERNET -p tcp --dport 80 -j REDIRECT --to-port $SQUID_PORT # DROP everything and Log it iptables -A INPUT -j LOG iptables -A INPUT -j DROP If you know where did I miss, please advice me. Thanks for all your help and I really appreciate it.

  Read the article

• Batch copy gives errors, xcopy works fine

  - by ndm13

  I am writing a general file backup program. It searches the drive for files matching a set of types and then writes them to a folder on the desktop. I wrote it using xcopy on Windows XP but upon learning that xcopy was deprecated in favor of robocopy in Vista and newer, still wanting to maintain compatibility I decided to switch to the non-deprecated copy. This is where the problems begin. I'm trying to fix the copy routine. I thought I had everything sorted out, but it doesn't copy anything. My output is zero files copied for every iteration. Original Code using xcopy: for /r %%a in (*.bmp *.dds *.gif *.jpg *.jpeg *.png *.psd *.pspimage *.tga *.thm *.tif *.tiff) do ( echo f | xcopy "%%a" "%HOMEDRIVE%%HOMEPATH%\Desktop\LDR\Images\Bitmap\%%~nxa" /q /y /g /c ) Revised (broken) Code using copy: for /r %%a in (*.bmp *.dds *.gif *.jpg *.jpeg *.png *.psd *.pspimage *.tga *.thm *.tif *.tiff) do ( copy "%%a" "%HOMEDRIVE%%HOMEPATH%\Desktop\LDR\Images\Bitmap\%%~nxa" /d /y /z ) Output: The system cannot find the path specified. 0 files copied. I know that it seems everyone uses either xcopy or robocopy but can anyone help with copy? Note: I'm using Batch to keep it very lightweight and command-line accessible.

  Read the article

• PDF to HTML - batch converter - most reliable and accurate free AND paid for software?

  - by therobyouknow

  I'm look for either a free or paid-for (about 50$/40pounds) BATCH PDF to HTML converter to convert several PDF files at once. Needs to be able to handle vectored and bitmap images within the file, outputting both as jpegs referenced by the html pages. I've tried iorigsoft paid-for PDF to HTML - problems it seems to hang or just go idle, and the stuff it actually converts have broken links - the wrong name is used for constituent chapters as html. Also tried application from intrapdf.com but this crashes near the beginning of the conversion, consitently. Update: intrapdf works on my Windows XP machine but not on my Windows 7 machine. The only glitch is with the framed index contents html - the graphics in the page do not display in the page in the frame - but if you open the frame only in a new tab then you can see them. That might be a browser glitch in chrome only. This solution is good enough for me - given that I've already spent the money (I had spent before I asked) but I can't accept my own answer as this does not work on Windows 7. Looked at opensource tools but they look equally flakey or use old PDF versions. Need it on Windows 7 32bit home. Thoughts?

  Read the article

• Can't resolve offline file conflicts

  - by Bryan

  We use roaming profiles on our Server 2008 R2 domain, with folder redirection for 'desktop', 'my documents' and 'application data'. But as our network is split across two sites, we have one file server at each site, which are configured to use domain based DFS namespaces and DFS replication to keep things in sync. The DFS path for the replication folder is as follows: \\domain\folderredirection$\<username>\<redirected-folder-name> The real paths are \\site-1-server\folderredirection$\<username>\<redirected-folder-name> and \\site-2-server\folderredirection$\<username>\<redirected-folder-name> As our users all switch between sites (sometimes several time per day), our folder redirection policy has to redirect to the DFS roots rather than hardcoded to a specific server. Both DFS and DFS-R have been proven to be working perfectly. On our laptops, we use offline files for the redirected folders, and this also works fine, however the problem is as follows: When conflicts occur in offline files, it is impossible to resolve the conflicts. I'm given the usual conflict resolution options (i.e. 'Ignore', 'Keep Both', 'Keep network' and 'Keep local'), however, not one of these options will resolve any conflict, yet no error is produced. We only use offline files on laptops, which have either Windows XP Professional or Windows 7 Professional installed. The problem is not specific to any one laptop, it affects every laptop and every conflicting file in exactly the same way. I would have thought the set up we have is common for companies that have multiple sites, so I'm hoping someone will have seen this before?

  Read the article

• Domain joined computer unable to access servers through VPN

  - by kscott

  Our servers are in a virtual off site hosting center, our office has a vpn connection to the data center, but for reasons I don't understand we also have to connect to the Citrix Access Gateway (CAG) client in order to access the servers. I am a programmer with rather limited ops knowledge including a weak grasp of networking and terminology. Bear with me. I was just given a new laptop, which is a 64 bit Windows 7 system unlike my previous 32 bit Windows XP desktop which was able to connect without issue. My laptop has been joined to the domain so that I login with my AD credentials, I am able to connect to the CAG and get authenticated, and after doing this I can ping our servers and they resolve to the correct internal IP addresses, but I am unable to use remote desktop to the servers, connect to SQL servers through my local SQL Management Studio, navigate to them through the file system, or view any of our internal intranet websites. All of which I was able to do previously. I have tried turning off my Windows firewall and the problem remains, the DNS servers are set to the correct IPs of our domain controllers, and the ops guys here are a little stumped. Does any one have any suggestions?

  Read the article

• Limiting bandwith on an Windows 7 machine

  - by Mihai Damian

  I need to limit the bandwidth on my Windows 7 x64 machine. In the past (on XP) I've been able to use NetLimiter for similar tasks. However for some reason I can't get it to work anymore. For lower limits the bandwidth tests are able to exceed the limit by 10-50%; higher limits seem to be ignored completely and the bandwidth tests report download speeds of over 10 times the speed I set. I'm using speedtest.net and some similar service from my ISP for these tests. Anyway, I don't necessarily need a program as complex as NetLimiter since I only need to throttle my machine's bandwidth, not a specific program's. In case you are wondering why in the world I'd want to cripple my Internet speed, there is a funny story behind this. Long story short, my modem gets random disconnects. Tech support comes in, says my Internet speed is abnormally high and I must be using some tools to somehow make it go faster than it's supposed to and this messes up my modem. I check the connection with another computer and it seems that my PC is the only one in my network that gets abnormal speeds. I reinstall my OS, speed looks normal at first, after I install the batch of 50 or so updates, it goes back to abnormally high speeds and the disconnect problems are not solved. Now I don't have a clue if the explanation the tech team gave me was just a strategy to lay the blame on someone else, but I was trying to give them the benefit of the doubt and see what happens if I really reduce my speed to their specification. Any help appreciated.

  Read the article

• Why can't Logman start?

  - by Bill Paetzke

  I'm setting up my first logman counter. But it's not working! There is some file or folder permissions problem. Or maybe I wrote the create-counter statement wrong. Here's my counter commands: logman create counter BillTest -si 30 -v nnnnnn -max 200 -o "C:\Temp" -c "\Processor(*)\*" "\Memory(*)\*" "\LogicalDisk(*)\*" logman start BillTest The first command works. It says counter creation successful. The second command fails: Collection "BillTest" did not start, check the application event log for any errors Here's the error in the Event Viewer: The service was unable to open the log file C:\Temp_000001.blg for log BillTest and will be stopped. Check the log folder for existence, spelling, permissions, and ensure that no other logs or applications are writing to this log file. You can reenter the log file name using the configuration program. This log will not be started. The error returned is: Access is denied. I verified that C:\Temp exists. I'm not a permissions guru, but I did set all the accounts in the security tab of that folder to "full control." Still, the logman start command failed with the same error. I noticed that it was trying to write to C:\Temp_000001.blg instead of C:\Temp\000001.blg. That might be part of the problem. So, I tried to update my counter to "C:\Temp\" instead of "C:\Temp", but that failed with a path-invalid error. Also, all the examples I saw online used did not put a trailing slash. So, no dice there. I tried this on my machine (Windows XP) and my dev server (Windows Server 2003). Both failed with the same error. How can I fix this?

  Read the article

• Remote Desktop Printing With Color

  - by philibertperusse

  Our ACCPACC administration software runs on an off-site dedicated hosted computer, running Windows 2003 Server with a completely different NT DOMAIN. We have many users connecting to that computer remotely to perform administrative tasks such as printing cheques, printing invoices, printing POs, packing slips and so on. Basically the setup is that we are all connecting using Remote Desktop Protocol (local computers are Mac OS.X, XP SP3, Vista and Windows 7). At our office we have a DOCUCOLOR 242 printer. When printing from the ACCPACC software, it prints to the local printer in our office. This is because we are using RDP features to connect printer ressources to the remote computer. This almost works now. I had to install the printer driver software on the remote 2003 Server for the printer sharing to work. Now, everyone is able to print black and white but color is out. NOTES: Normal users on that Windows 2003 server are running as part of a Group Policy Object to restrict what can be done. I took one of these normal users and gave him all domain administrator rights, no effect still B&W only. I took this account and moved it OUT of GPO policies, as a normal account instead, no effect still B&W only. It seems only MY account (which is domain administrator AND a normal account not part of the GPO objects) can actually print with color. This is the account that was used for installing the printer driver software. How can I manage to get everyone to print in color? Any suggestions as to what to try next?

  Read the article

• COMPAQ Tower No Signal to monitor

  - by Lancelot

  Hi there, I have had some troubles with this: I received a compaq tower: Compaq Presario SR1224NX Onboard VGA Windows XP SP2 from a friend. It was given to me on condition i give her the files back. My plan was to turn this into an Ubuntu Server. It booted up no problems even with the ubuntu live disc. After a normal shutdown(not unpluggin the power cord and not doing a hard shutdown with the power button), it would not restart even after SEVERAL attempts. I realized the light next to the power supply would flash very rapidly. I researched and found out it was one of two things: a dead power supply or the cables to the motherboard and to the disks etc. Thus i checked to ensure the cables were fine(and they were). I purchased a Power Supply (this one has 400 watts, the initial had 250) and installed it. The tower now boots. It booted into the live disk and everything. After a normal shutdown, it now restarts but is not sending signal to my monitor. I have tried several monitors in which i assure work perfectly but not with this tower(i recall it did show display after replacing the power supply). The monitors are ACER. This is different than most "no Signal" problems since i am not using an external Video Card, this is onboard VGA. Thanks!

  Read the article

• EEE PC dropbox server running 24/7

  - by microspino

  I'd like to create a mini dropbox and print server on a small soho network of 5 users (all of them use windows XP desktops). The device need to run 24/7 or at least 12/7 (I can accept just workday hours too but the other two options would be better). Dropbox mini server: I mean I will have a 90gb dropbox on every computer on my network LAN syncing with It and the one onto It syncing to the web. Print Server: I have Samsung SCX 4521F (fax/print/scan/copy), Samsung ML2010, HP Laser jet P1006, HP Color Laserjet CP1215, HP Office jet pro K8600, HP Design jet 500. All of them now are connected using little print servers and I want to get rid of them hooking everything to this mini server. The fax/print/scan/copy machine need to stay connected to a PC to make me able to use the software that comes with It. The mini server would save me on this too. Fax/Scan server: since I have the above mentioned fax/print/scan/copy machine I would like to make people use It from/to their computers through the mini server. I thought to a recent EEEBOX machine because I heard good things about ATOM cpus and because It seems that a recent BIOS version could switch It off and on autonomously. I'd like to listen some advice from You. Best of all would be: If You have something similar running for a long time If You disagree with this hardware choice and If You would suggest some other device. If You see any issues with my printing setup Anything else ;) My budget is from Zero (using right sw to build something on top on a old PC) to 500€ max.

  Read the article

• TV-out worked, now doesn't. May the problem be the cable, TV, driver, OS, graphic card?

  - by Petruza

  I have a CRT TV hooked to the PC, which once worked great, now doesn't. I can't consider getting a newer TV, this one is used in an MAME arcade cabinet so it has to be a CRT for best old school look and feel. It's connected through the TV-out connector of my graphic card. When it worked, I had Windows XP, the same PC and the same card. Now I have windows 7, not sure if the OS switch caused the malfunction as I don't use the TV-out all the time. Can it be an upgrade of the Nvidia driver? I thought it may be the S-video to RCA cable, but tried 3 different cables and neither worked. In fact, one of them, that unlike the other two, has a single RCA output connector instead of two, behaves differently, although it doesn't work, but it does the following: When I open the NVidia settings panel, or when I change a setting and click Apply then the TV flashes for a split second and you can see the windows screen, but then it goes back to blank. So any clues what can be failing here, and some advice? Possible failures, please comment on the one you suspect the most: NVidia driver version Windows version Cable Graphic card's TV out other?

  Read the article

• Upgrade Nokia Maps from v2 to v3 fails

  - by ssollinger

  I'm trying to install Nokia Maps 3.0 on my Nokia N82, without much success. I believe other similar Nokia phones have the same problem. My phone is connected through USB in "PC Suite" mode, and the latest firmware available for N82 is installed. I currently have Maps 2.0 installed. I'm installing from a Windows XP PC, and tried the update first from within Ovi Suite (latest version) and from Nokia Maps Updater (latest version). In both cases it detects that there is an update available (Maps 3.0), downlowds it and starts the install. On my phone, I then get the following error message: Unable to install. Component is built in. And on the PC I get the error Error Cannot update maps application. The installation failed or was cancelled on the phone (18). I found an entry for Maps in the App. manager and deleted it (and turned phone off and on again afterwards), but this didn't make any difference (and I don't think it changed the version of Maps installed either). This is the release version of Maps 3.0, not the beta. I found the problem mentioned many times on various web sites, but couldn't find a solution anywhere. Has anybody any ideas how to get the upgrade from Maps 2.0 to Maps 3.0 to work?

  Read the article

• Encryption setup for Linux NAS?

  - by Daniel

  There's a bazillion hard disk encryption HOWTOs, but somehow I can't find one that actually does what I want. Which is: I have a home NAS running Ubuntu, which is being accessed by a Linux and a Win XP client. (Hopefully MacOS X soon...) I want to setup encryption for home dirs on the NAS so that: It does not interfere with the boot process (since the NAS it tucked away in a cupboard), the home dirs should be accessible as a regular file system on the client(s) (e.g. via SMB), it is easy to use by 'normal' people, (so it does not require SSH-ing to the NAS, mount the encrypted partition on command line, then connecting via SMB, and finally umount the partition after being done. I can't explain that to my mom, or in fact to anyone.) does not store the encryption key the NAS itself, encrypts file meta-data and content (i.e. safe against the 'RIAA' attack, where an intruder should not be able to identify which songs are in your MP3 collection). What I hoped to do was use Samba + PAM. The idea was that on connecting to the SMB server, I'd have to enter the password on the client, which sends it to the server for authentication, which would use the password to mount the encrpytion partition, and would unmount it again when the session was closed. Turns out that doesn't really work, because SMB does not transmit the password in the plain and hence I can't configure PAM to use the incoming password to mount the encrypted patition. So... anything I'm overlooking? Is there any way in which I can use the password entered on the client (e.g. on SMB connect) to initiate mounting the encrypted dir on the server?

  Read the article

• Copy a harddrive from a failed desktop machine using a second working one. [closed]

  - by MrEyes

  Heres the scenario: I have PC-A, an old PC that runs Windows XP but now refuses to boot due to a failed motherboard (or maybe PSU). This PC has a single 80gb IDE drive. I also have PC-B, running Windows Vista, this is working fine. I want to copy all the data off PC-As HDD onto PC-B. To do this I have taken the HDD out of PC-A and connected it as a slave to PC-B. PC-B now boots and sees the additional drive. However, when I attempt to access/copy user folders (i.e. Documents and Settings/[username]/*) I am told that I cannot access the folders due to user permissions. I am doing this under an adminstrator account on PC-B. So the question is, how can I "backup" the data? Preferably without making any changes to the drive contents. The reason for this is that it is possible that PC-A is failing due to a bad PSU, so I intend to replace it before writing off the machine. However I would feel much happier if I had a backup of the data on the HDD.

  Read the article

• Media Center - TV constantly pauses 1/2 second then plays 1 second

  - by Bob

  I have a problem watching TV in Media Center. The TV constantly pauses 1/2 second then plays 1 second, pauses 1/2 second, plays 1 second - it is constant and does not vary. I know the problem is Media Center because I can use Pinnacle's TVCenterPro and there is no skipping/pausing. I was using cable, and switched to DirecTV (satellite). Trying to do "Set up TV signal" in Media Center seems to be what broke it. I get an error "IR Hardware not detected." I can use the remote to "try again" - so the IR hardware works fine (Media Center's remote/sensor). I tried plugging the IR Blaster into both ports, and I tried a different USB port for the IR receiver. I can't complete the setup. Media Center was playing it okay before I tried to run setup. (I ran setup to try to do recording with Media Center.) Pinnacle PCTV 800i HD PCI card, ATI Radeon HD 3200 Graphics, Windows XP SP3 Media Center Edition, AMD Athlon Dual Core 2.5 GHz, 1.75 GB RAM.

  Read the article

• Iterating through folders and files in batch file?

  - by Will Marcouiller

  Here's my situation. A project has as objective to migrate some attachments to another system. These attachments will be located to a parent folder, let's say "Folder 0" (see this question's diagram for better understanding), and they will be zipped/compressed. I want my batch script to be called like so: BatchScript.bat "c:\temp\usd\Folder 0" I'm using 7za.exe as the command line extraction tool. What I want my batch script to do is to iterate through the "Folder 0"'s subfolders, and extract all of the containing ZIP files into their respective folder. It is obligatory that the files extracted are in the same folder as their respective ZIP files. So, files contained in "File 1.zip" are needed in "Folder 1" and so forth. I have read about the FOR...DO command on Windows XP Professional Product Documentation - Using Batch Files. Here's my script: @ECHO OFF FOR /D %folder IN (%%rootFolderCmdLnParam) DO FOR %zippedFile IN (*.zip) DO 7za.exe e %zippedFile I guess that I would also need to change the actual directory before calling 7za.exe e %zippedFile for file extraction, but I can't figure out how in this batch file (through I know how in command line, and even if I know it is the same instruction "cd"). Anyone's help is gratefully appreciated.

  Read the article

• How to set up a serial connection to a Windows 7 computer

  - by oli_arborum

  I need to set up a "dial in" connection to a Windows 7 (Ultimate) computer via a serial null-modem cable to be able to connect from a Windows XP client to that computer and exchange data over IP. Question 1: How do I do that? I did neither find the information via Google nor in the MSDN. Seems like no one tried ever before... ;-) I already managed to install a legacy modem device called "Communications cable between two computers" and found the menu entry "New Incoming Connection..." in Network and Internet Network Connections. When I finish this wizard I get the message that the "Routing and Remote Access service" cannot be started. In the event viewer I see the following error messages: "The currently configured authentication provider failed to load and initialize successfully. The requested name is valid, but no data of the requested type was found." (Source: RemoteAccess, EventID: 20152) "The Routing and Remote Access service terminated with service-specific error The requested name is valid, but no data of the requested type was found." (Source: Service Control Manager, EventID: 7024) The Windows 7 installation is "naked", i.e. no additional software or services are installed. Question 2: Am I on the right path to set up the connection? Question 3: How can I get the Routing and Remote Access service running?

  Read the article

• Windows, never "lose focus" of the current window

  - by Mazura

  I want the task bar to light up orange and never lose focus to anything. If I'm installing something and then go play a game at some point it will drop out to the finished instillation. Also, if installing multiple programs at once my 'next' button can all of sudden become "click here to install this crappy toolbar" of another program's install. Of course there are settings for some programs to not "lose focus" or "stay on top" but I really want windows to handle it. If its somehow an exe called say, Taskswtich.exe, I could possibly use Process Blocker however I'm assuming its part of a function call or some such. For XP I found this: How to disable auto focus of opened Windows applications? but what about Windows7? And this old post Preventing applications from stealing focus with a bunch of long answers that say "no". I'd appreciate this not being merged with a 4 year old question. I'd like to avoid 3rd party software. This is 2014, don't we know how to hack windows yet?

  Read the article

• None of usb-controllers are working after a crash

  - by Cray

  So I have a GA-p35-DS4 mboard with a Q6600, running windows7-x64. After a random crash with a bluescreen (not caused by anything particular as I recall), none of the usb-controllers are working. (And none of the devices connected to those usb ports). All the controllers are showed up in the device manager, but every one has a warning-icon (as they are not functioning properly). The windows identifies them correctly, it shows exactly the model of each controller, and it says that the driver is installed. Now, when I try to reinstall the driver (Update driver menu item in the device manager), it tries to find it, finds the driver, but quits saying that the driver was found but could not be installed. Additionally, it displays "This operation requires an interactive window station", whatever that means... Now get this, the same thing happens with a new pci-usb controller card! It is found (actually each time the machine starts, it is found as new hardware), but trying to install drivers leads nowhere, I am getting the same message about an interactive window station. (tried to install drivers from the acoompanying CD) I have tried deleting those devices from device manager and let windows find them again, but that leads to same results. None of the ports on this extension card work either. This should not be a hardware problem, a usb keyboard connected to the builtin usb controller works in bios, and even in another OS running the same computer (old xp installation) What to do? Will I have to reinstall? Can deleting infcache.1 help? Is there some way to let windows remove all old drivers and try to find all hardware again, this time only looking for drivers on a windows install disk or something?

  Read the article

• How to configure SCSI hard drives and RAID for Poweredge 2850 web server

  - by Saul

  I'm trying to set up a Poweredge 2850 as a web server, but as a server novice it's causing me some confusion. Its a virgin install so no data to be lost as yet, so I'd like to get the best arrangement for setting up Windows Server 2008. The box will run IIS, a mail and FTP server. The current physical arrangement of the hot swap drives is 1 73GB 3 146GB 5 blank 0 73GB 2 146GB 4 146GB (but flashes green, amber off) When I enter the PERC config screens on boot up I've got Raid Ch- 0 ID 0 ONLIN A00-00 1 ONLIN A00-01 2 ONLIN A01-00 3 ONLIN A01-01 4 HOTSP I think that drives 0 and 1 are set to RAID 1 and drives 2 and 3 are also set to RAID 1, certainly I can see 2 logical drives, both raid 1 of 69880MB and 139900MB Now what I think I am getting here is that the 2 73GB drives mirror each other and the 2 146GB drives mirror 2? so by my noob thinking if a drive fails I can pull it, insert and new one and it will reduplicate from its matching pair? I think the flashing amber probably indicates a failing drive in slot 4, should that just be binned? What confuses me coming from a home user XP background is that when I load up Windows Server 2008 OS under my computer I only see a C drive of about 70GB capacity. i.e wheres the 146GB drive? Any advice appreciated

  Read the article

• How can I make Cygwin open a new window each time I use a Window 7 keyboard shortcut?

  - by Michael Gundlach

  [Update: The short answer is, if an application in the 3rd thing on your taskbar, press WindowsKey+Shift+3 to open a new instance. Hooray!] I have Chrome and Cygwin on my taskbar. Chrome's shortcut is Ctrl-Alt-C (as set through right clicking the icon and putting Ctrl-Alt-C into Chrome - Properties - Shortcut Key). Cygwin's shortcut is Ctrl-Alt-T. When I press Ctrl-Alt-C, I get a new Chrome window. Great! It's as if I had shift-clicked on the Chrome icon. When I press Ctrl-Alt-T, I get a Cygwin window the first time, but after that I just get focused on the Cygwin window. As if I had simply clicked on the Cygwin icon and not shift-clicked. As if Cygwin wasn't able to have more than one instance open. I can still shift-click the icon to get more instances. I've tried with different keys than Ctrl-Alt-T and got the same behavior. Strangely, I've twice managed to get it into a state (via just clearing and setting the shortcut key over and over) where a shortcut WOULD open multiple instances -- but it was Ctrl-Alt-G both times, which doesn't make sense to my brain which has been trained to use Ctrl-Alt-T for years. Ctrl-Alt-G usually behaves just as poorly as Ctrl-Alt-T, except for the two times when magically it started behaving properly. So I'm thinking this is a Windows 7 bug (which has existed since Windows XP at least), but I'm hoping someone knows something I don't :)

  Read the article

• Physical-to-virtual for personal use

  - by Journeyman Geek

  One of my current projects involves reducing the number of old computers lying around. So far, the office systems have been downsized from 5 to 2. One system which had no data on it was dumped entirely, while three other identical boxes were consolidated into to one (I swap hard drives as needed and they just work(tm)). I want to make further cuts. The physical systems in question all run windows xp sp3, and were old Pentium 4s with 256 MB of RAM. Currently, I have got a VirtualBox running on another system. My intention is to migrate all services to that. We can assume that disk space and RAM on the host is not an issue. I'd rather not go with a client-server physical-to-virtual (P2V) method like what VirtualBox uses now. I have a few specific concerns as well - specifically whether I'd need to reactivate or sysprep for dissimilar hardware first. An offline tool for imaging (Windows or Linux) would not be an issue since the drives could be mounted onto another system I have anyway or I could use a LiveCD. What would be my options for P2V conversion, and what would I need to keep in mind when doing this?

  Read the article

• Vista WHS Client stopped resolving local names

  - by andrewcr

  I’m running Windows Home Server PP2 in my home, with 3 client computers: two XP and one Vista. I have a router that provides my local DHCP and the server has a static IP address. The other day the Vista machine hung, and on reboot stopped resolving local names. It will show the green home server client icon in the system tray, but if I attempt to log in to the console, I get a “This computer cannot connect to your home server” message. If I ping the server name from the command line, it does not resolve, and gives a “could not find host” message. Oddly enough, if I browse the network, I can see the server, but double clicking on it fails. The other machines on the local network have no problems seeing the server, and the Vista machine has no problems resolving names from the internet, it just can’t see any local machines. I’m aware that I can work around this by adding entries to my HOSTS file (it does work), but I’d like this to work the way it’s “supposed” to. I’m an experienced computer user and developer, but not a networking whiz. Can anyone tell me how local name resolution is supposed to work in my environment and/or suggest ways to troubleshoot this? Thanks, Andy

  Read the article

< Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >