Search Results

Search found 8165 results on 327 pages for '3d graphics'.

Page 309/327 | < Previous Page | 305 306 307 308 309 310 311 312 313 314 315 316  | Next Page >

  • Soft lockup after upgrade - cannot install from live CD

    - by nbm
    I dual-boot MacIntel Core 2 duo. nVidia graphics. Ran upgrade from ubuntu 13.10 to 14.04 (64 bit). On restart ran into {numbers} Bug: soft lockup - CPU#0 stuck for 22s! [swapper/0:1] Tried loading earlier kernel: same problem Tried re-installing ubuntu from a liveCD that has worked in the past: version 13.04. Same problem. Tried re-partitioning hard drive using Mac OS X disk utility and then installing ubuntu 14.04LTS from liveCD. Same problem. Not possible to verify liveCD disk (creates same "soft lockup" bug.) Tried installing from the liveCD with version 13.04 that I know works (that's how I got Ubuntu on this machine in the first place.) Same problem. I know this is not a hardware problem as OS X works just fine, I am using it right now on the same machine. I have been using various versions of Ubuntu for 2 years. Things I cannot do: Open a terminal Verify CD image Start ubuntu from CD (same soft lockup problem) This problem is similar to some other questions, none of which have been satisfactorily answered: Ubuntu 14.04 soft lockup on Vostro 3500 Cannot do fresh install of Ubuntu 13.04 while booting from DVD: "soft lockup" bug Live CD stalls when installing Ubuntu 13.10 UPDATE 6/11/14: Following some much-appreciated advice from bain (see below) I burned a 12.04LTS disk and started with kernel parameters: noapic, no1apic, acpi=off, nomodeset, elevator=deadline, and clocksource=jiffies. With all of these parameters I was able to load the 12.04LTS CD ("Try without installing"). It worked fine. However, as soon as I tried to install Ubuntu from the CD, my wired ethernet (eth0) connection would hang. There are already various askubuntu questions and bug reports about this problem, none of which had answers for me. (E.g., dhclient eth0 does nothing, none of the various reset commands does anything, manually setting IP &etc does nothing. I could reliably kill the ethernet connection by clicking "install ubuntu" every single time.) I could go ahead and install 12.04 without an internet connection, but the install would freeze after mostly completing (I tried several times.) There were some relevant error messages in the details of the install output script that, IIRC, had to do with searching for missing files and not being able to access eth0 (internet) to get them. To be honest I gave up at that point and I'm not sure I wrote those down. If I find some notes I will post them. At this point I no longer have Ubuntu on my system. I wiped the partitions and am using exclusively OS X. I am leaving this question in case it helps anyone else with similar problems. I love open source and I love Linux, and the next machine I get I will probably just build from Arch. At the moment I miss repositories and a lot of other things about Ubuntu, but the OS X terminal is 'nix, I can pretty much use all the open source apps I like, and while I am not a fan of the Apple software it gets the job done for me. Unlike Ubuntu, which can't even install. I realize this isn't necessarily a place for a soapbox speech, but when I first installed 12.04 several years ago there were already people in the community complaining that Canonical was going too "commercial". But I loved it. Several years later and all I've seen is Canonical adding more not-so-useful bells and whistles to Ubuntu while continually failing to fix basic problems on upgrades. With a dual-boot (and sometimes triple-boot) system it always took me some tweaking to get an upgrade to work, and to some extent that is okay. But at this point I feel like Canonical ought to just put a price tag on Ubuntu. All I see is more commercialism and advertising and product tie-ins, and ongoing problems do not get fixed. I am a big fan of open-source, not-for profit enterprise. I am also a big fan of for-profit enterprise, which certainly has its place and usefulness. I am not a fan of companies who pretend to be in favor of open source but really are just out to make a buck, and IMNSHO that is what Canonical has become. This is a great community and I wish you all the best, but my next install of Linux will not be Ubuntu.

    Read the article

  • How do I pass vertex and color positions to OpenGL shaders?

    - by smoth190
    I've been trying to get this to work for the past two days, telling myself I wouldn't ask for help. I think you can see where that got me... I thought I'd try my hand at a little OpenGL, because DirectX is complex and depressing. I picked OpenGL 3.x, because even with my OpenGL 4 graphics card, all my friends don't have that, and I like to let them use my programs. There aren't really any great tutorials for OpenGL 3, most are just "type this and this will happen--the end". I'm trying to just draw a simple triangle, and so far, all I have is a blank screen with my clear color (when I set the draw type to GL_POINTS I just get a black dot). I have no idea what the problem is, so I'll just slap down the code: Here is the function that creates the triangle: void CEntityRenderable::CreateBuffers() { m_vertices = new Vertex3D[3]; m_vertexCount = 3; m_vertices[0].x = -1.0f; m_vertices[0].y = -1.0f; m_vertices[0].z = -5.0f; m_vertices[0].r = 1.0f; m_vertices[0].g = 0.0f; m_vertices[0].b = 0.0f; m_vertices[0].a = 1.0f; m_vertices[1].x = 1.0f; m_vertices[1].y = -1.0f; m_vertices[1].z = -5.0f; m_vertices[1].r = 1.0f; m_vertices[1].g = 0.0f; m_vertices[1].b = 0.0f; m_vertices[1].a = 1.0f; m_vertices[2].x = 0.0f; m_vertices[2].y = 1.0f; m_vertices[2].z = -5.0f; m_vertices[2].r = 1.0f; m_vertices[2].g = 0.0f; m_vertices[2].b = 0.0f; m_vertices[2].a = 1.0f; //Create the VAO glGenVertexArrays(1, &m_vaoID); //Bind the VAO glBindVertexArray(m_vaoID); //Create a vertex buffer glGenBuffers(1, &m_vboID); //Bind the buffer glBindBuffer(GL_ARRAY_BUFFER, m_vboID); //Set the buffers data glBufferData(GL_ARRAY_BUFFER, sizeof(m_vertices), m_vertices, GL_STATIC_DRAW); //Set its usage glVertexAttribPointer(0, 3, GL_FLOAT, GL_FALSE, sizeof(Vertex3D), 0); glVertexAttribPointer(1, 4, GL_FLOAT, GL_TRUE, sizeof(Vertex3D), (void*)(3*sizeof(float))); //Enable glEnableVertexAttribArray(0); glEnableVertexAttribArray(1); //Check for errors if(glGetError() != GL_NO_ERROR) { Error("Failed to create VBO: %s", gluErrorString(glGetError())); } //Unbind... glBindVertexArray(0); } The Vertex3D struct is as such... struct Vertex3D { Vertex3D() : x(0), y(0), z(0), r(0), g(0), b(0), a(1) {} float x, y, z; float r, g, b, a; }; And finally the render function: void CEntityRenderable::RenderEntity() { //Render... glBindVertexArray(m_vaoID); //Use our attribs glDrawArrays(GL_POINTS, 0, m_vertexCount); glBindVertexArray(0); //unbind OnRender(); } (And yes, I am binding and unbinding the shader. That is just in a different place) I think my problem is that I haven't fully wrapped my mind around this whole VertexAttribArray thing (the only thing I like better in DirectX was input layouts D:). This is my vertex shader: #version 330 //Matrices uniform mat4 projectionMatrix; uniform mat4 viewMatrix; uniform mat4 modelMatrix; //In values layout(location = 0) in vec3 position; layout(location = 1) in vec3 color; //Out values out vec3 frag_color; //Main shader void main(void) { //Position in world gl_Position = vec4(position, 1.0); //gl_Position = projectionMatrix * viewMatrix * modelMatrix * vec4(in_Position, 1.0); //No color changes frag_color = color; } As you can see, I've disable the matrices, because that just makes debugging this thing so much harder. I tried to debug using glslDevil, but my program just crashes right before the shaders are created... so I gave up with that. This is my first shot at OpenGL since the good old days of LWJGL, but that was when I didn't even know what a shader was. Thanks for your help :)

    Read the article

  • What to leave when you're leaving

    - by BuckWoody
    There's already a post on this topic - sort of. I read this entry, where the author did a good job on a few steps, but I found that a few other tips might be useful, so if you want to check that one out and then this post, you might be able to put together your own plan for when you leave your job.  I once took over the system administrator (of which the Oracle and SQL Server servers were a part) at a mid-sized firm. The outgoing administrator had about a two- week-long scheduled overlap with me, but was angry at the company and told me "hey, I know this is going to be hard on you, but I want them to know how important I was. I'm not telling you where anything is or what the passwords are. Good luck!" He then quit that day. It took me about three days to find all of the servers and crack the passwords. Yes, the company tried to take legal action against the guy and all that, but he moved back to his home country and so largely got away with it. Obviously, this isn't the way to leave a job. Many of us have changed jobs in the past, and most of us try to be very professional about the transition to a new team, regardless of the feelings about a particular company. I've been treated badly at a firm, but that is no reason to leave a mess for someone else. So here's what you should put into place at a minimum before you go. Most of this is common sense - which of course isn't very common these days - and another good rule is just to ask yourself "what would I want to know"? The article I referenced at the top of this post focuses on a lot of documentation of the systems. I think that's fine, but in actuality, I really don't need that. Even with this kind of documentation, I still perform a full audit on the systems, so in the end I create my own system documentation. There are actually only four big items I need to know to get started with the systems: 1. Where is everything/everybody?The first thing I need to know is where all of the systems are. I mean not only the street address, but the closet or room, the rack number, the IU number in the rack, the SAN luns, all that. A picture here is worth a thousand words, which is why I really like Visio. It combines nice graphics, full text and all that. But use whatever you have to tell someone the physical locations of the boxes. Also, tell them the physical location of the folks in charge of those boxes (in case you aren't) or who share that responsibility. And by "where" in this case, I mean names and phones.  2. What do they do?For both the servers and the people, tell them what they do. If it's a database server, detail what each database does and what application goes to that, and who "owns" that application. In my mind, this is one of hte most important things a Data Professional needs to know. In the case of the other administrtors or co-owners, document each person's responsibilities.   3. What are the credentials?Logging on/in and gaining access to the buildings are things that the new Data Professional will need to do to successfully complete their job. This means service accounts, certificates, all of that. The first thing they should do, of course, is change the passwords on all that, but the first thing they need is the ability to do that!  4. What is out of the ordinary?This is the most tricky, and perhaps the next most important thing to know. Did you have to use a "special" driver for that video card on server X? Is the person that co-owns an application with you mentally unstable (like me) or have special needs, like "don't talk to Buck before he's had coffee. Nothing will make any sense"? Do you have service pack requirements for a specific setup? Write all that down. Anything that took you a day or longer to make work is probably a candidate here. This is my short list - anything you care to add? Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • The Dreaded Startup Repair Loop on Win 7

    - by HighAltitudeCoder
    For most people, upgrading to Windows 7 has been a relatively painless process.  Not me.  I am in the unlucky 1% or less who had a somewhat less pleasant experience.  First, I cloned my entire onto a larger (and much faster) solid state hard drive, only experiencing minimal problems. Then, I bought the Retail version of Windows 7 Ultimate, took a deep breath and... oh yeah, I almost forgot - BACK UP THE COMPUTER.  The next morning I upgraded to Win 7 and everything seemed fine, until... I rebooted the system, the nice Windows 7 launch graphics come up, it's about to launch and AWWW, are you kidding me?!?!  Back to the BIOS splash screen?  Next comes the sequence of failure - attempt repair - unable to repair - do you want to wipe your hard drive decisions. Because I purchased the retail version, a number is provided where I could call Microsoft Tech support.  When I did, they instructed me to click "Install" from my installation CD, which did not work.  When I tried the "Upgrade" option, it reaches an impasse, telling you that yoiu have a newer version of Win 7, and thus cannot Upgrade.  If you choose "Install" you willl lose everything... files, programs, EVERYTHING.  Or at least this is what it tells you.  I was not willing to take the risk. To make things worse, I had installed a new antivirus software application before I realized my system was unstable (Trend Micro Titanium Internet Security), and this was causing additional problems. One interesting thing, and the only saving grace as it turns out, was that my system WOULD successfully reboot into the OS if I chose to restart it, rather than shut it down.  If I chose to shut down, I would have to go through the loop again until I was given the option to restart. As it turned out, I needed to update my BIOS.  I assumed that since I had updated my BIOS a long time ago to settings that were stable under Windows Vista Ultimate x64, I incorrectly expected Win 7 to adopt the same settings and didn't expect there to be any problems.  WRONG. My BIOS had a setting to halt the boot cycle if various kinds of errors were detected.  Windows Vista didn't care about this, but forget it under Windows 7.  I turned immediately corrected that BIOS setting.  Next, there were the two separate BIOS settings: enable USB mouse and enable USB keyboard.  The only sequence of events that would work were to start my reboot process over from stratch with a hard-wired non-usb keyboard and mouse.  Whent the system booted under these settings, it doesn't detect any errors due to either the mouse or keyboard, and actually booted for the first time in a long while (let me tell ya, that's an amazing experience after fiddling with settings for two entire weekends!) Next step: leave your old mouse and keyboard connected, but also connect your other two devices (mouse, keyboard) that use USB connections.  During the boot cycle, the operating system will not fail due to missing requirements during startup, and it will then pick up the new drivers necessary to use your new hardware. If you think you are in the clear here, you are wrong.  The next VERY IMPORTANT step is to remember to change your settings in the BIOS upon next startup.  Specifically, yoiu will need ot change your BIOS to enable USB mouse and enable USB keyboard input.  If you don't, Windows will detect an incompatibility upon the next startup, and you will be stuck once again in the endless cycle of reboot/Startup Repair/reboot/Startup Repair, without ever reaching a successful boot. Here's the thing - the BIOS and the drivers registered in Win 7 need to match.  If they don't, you're going to lose another weekend worrying and fiddling, all the while wondering if you've permanently damaged your hard drive beyond repair. (Sigh).  In the end, things worked out.  I must note that it is saddening to see how many posts there are out there that recommend just doing a clean install, as if it's the only option.  How many countless poor souls have lost their data, their backups, their pictures and videos, all for nothing other than the fact that the person giving advice just didn't know what to do at that point? My advice to you, try having a look at your BIOS settings first and making sure Win 7 can find your BIOS settings, and also disabling in your BIOS anything that might halt your system boot-up process if it encounters errors.

    Read the article

  • SPARC T4 ??????: SPARC T4 ??????????!!

    - by user13138700
    ?? 2011 ? 9 ?? SPARC T4 CPU ???????? SPARC T4 ????????????????2011??10?????????????????????????? ????????????????????SPARC T4 ?????????????????????????????????????????????????????????? SPARC T4 CPU ???? SPARC T4 ?????????????????????????????????? ??????????????????????4/4, 4/5, 4/6 ? 3???????? Oracle Open World 2012 ???????? Oracle Open World 2012 Tokyo ?? Oracle ?????&????? ??? Oracle Solaris ????????????·????????? SPARC&Solaris ??????????????SPARC&Solaris ????????????????????????????????????????????????????????????????????????? Oracle OpenWorld Tokyo 2012 ???? URL http://www.oracle.com/openworld/jp-ja/index.html ?????? 7264 ??????????????? ????Oracle Open World 2012 Tokyo ?????????????????????????SPARC T4 ????? ????????????????? SPARC T4 ????????? SPARC T3 ????????(S2??)??????????????????????????(S3??)??????????????????? ???????" T " ???????????????(?)?????? SPARC T1/T2/T3 ???????????????????????????(????????)????????????????????????? ?SPARC T4 ????????????????????????????? ?SPARC T4 ???????DB?????????????????????????????? ???????????????? ????????????????????????????????????????????? ???? SPARC T3 ???????????????????????????2???????????? ????????????????????????????????????????????????????? ?????????????? SPARC T4 ????????????????????????????????????SPARC T4 ????????? SPARC T4 ??????????????????????????????????????????? ?????????????? T4 ??????????????????? SPARC ???????????????????????????????????????????????????????????????????&??????????? ?????????????????????????????????????????????????????????Web?????????????DB?????????????????????????????????????? (????????????) ???????????? SPARC T4 ????????????????????????????? < T4 ???????? > ??? SPARC ??(S3??)??? x5??????????????????? x2????????????????????? Crypto (?????)?????????? ?????????????????????????/???????????????? ?????? 1, 2,& 4 ??????????? < T4 ????? ??????? > 8x SPARC S3 ?? (64????/???) 4MB ?? L3 ????? (8???/16???) 8x9 ????? 4x DDR3 ??????????? @6.4Gbps 6x ?????????? @9.6Gbps 2x8 PCIe 2.0 (5GTS) 2x10Gb XAUI ??????? < S3???????????? > ALU : Arithmetic Logic Unit BRU : Branch Logic Unit FGU : Flouting-point Graphics Unit IRF : Integer Register File FRF : Flouting-point Register File WRF : Working Register File MMU : Memory Management Unit LSU : Load Store Unit Crypto(SPU) : Streaming Processing Unit TRU : Trap Logic Unit < S3????????? > ????? 8????/?? ?????? Out-of-Order ?? 16???????????????? ????????????? ???????????? ??????? ????????? 64???? ITLB ? 128???? DTLB 64KB 4??? L1 ?????????????? 128KB 8??? ???? L2 ????? < T4 ???????? vs T3 ???????? > T4 ????????????? Out-Of-Order ???? Pick ???????? In-Order ?? Pick ?????? Commit ??????? Out-Of-Order ?? Commit ?????? In-Order ?? < T4 ?????????? > ???????????vs????????????????????????????? ????????Active??????????????????? ???????????????????????? ??????????????????? < T4vsT1/T2/T3 ??????? > SPARC T4 ???? T3????????Web??????????? DB?????????????????????????????? ????????????????????SPARC T4 ?????&Solaris ?????????????(????????)??????????????????????????????????????????????????????????!!? ????Oracle Open World 2012 Tokyo ????????????????SPARC T4 ?????????????????????? 4/4, 4/5, 4/6 ?3????????????????????????????????????????????????????????????????????????????????????? ????????????????? URL http://www.oracle.com/openworld/jp-ja/exhibit/index.html

    Read the article

  • Dual head setup for Ubuntu 10.04.1 and Windows XP Pro with same hardware configuration

    - by mejpark
    Hello. I have a Dell OptiPlex 360 workstation at work, with 2 x ATI RV280 [Radeon 9200 PRO] graphics cards installed, which are attached to two identical 19" HII flat panel monitors. I'm using the open source Radeon driver with Ubuntu, and the proprietary drivers with Windows. The good news is that dual head configuration works for both OSes. The bad news is, I have to use a different hardware configuration for each OS to achieve this. Hardware config #1: Dual monitors work for Windows XP Pro like this: First display -> external VGA port Second display -> DVI input on gfx card Hardware config #2: Dual monitors work for Ubuntu 10.04.1 like this: First display -> VGA port on gfx card Second display -> DVI input on gfx card I connected up the displays according to Config #2 and booted up Windows, which resulted in a mirror image on both screens. I was unable to login, as the login box was not visible. I unplugged the VGA lead from gfx card and plugged it into the external VGA port (Config #1) - Windows dual head works again, but the VGA-connected screen is not recognised by Ubuntu and remains in standby mode. Is it possible to configure a dual head setup for Ubuntu using Config #1, or am I missing something? I tried setting up dual monitors using Config #1, this morning which didn't work. By default, there is no xorg.conf file in Ubuntu 10.04.1, so I generated one using: $ sudo X :2 -configure X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux harrier 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a34c1931-98d4-4a34-880c-c227a2936c4a ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.2.log", Time: Mon Sep 13 10:02:02 2010 List of video drivers: apm ark intel mach64 s3virge trident mga tseng ati nouveau neomagic i740 openchrome voodoo s3 i128 radeon siliconmotion nv ztv vmware v4l chips rendition savage sisusb tdfx geode sis r128 cirrus fbdev vesa (++) Using config file: "/home/michael/xorg.conf.new" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting. Xorg detected your mouse at device /dev/input/mice. Please check your config if the mouse is still not operational, as by default Xorg tries to autodetect the protocol. Xorg has configured a multihead system, please check your config. Your xorg.conf file is /home/michael/xorg.conf.new To test the server, run 'X -config /home/michael/xorg.conf.new' ddxSigGiveUp: Closing log $ sudo X -config /home/michael/xorg.conf.new Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. Please consult the The X.Org Foundation support at http://wiki.x.org for help. ddxSigGiveUp: Closing log I then booted Ubuntu in failsafe mode, dropped into root shell, and executed $ X -config /home/michael/xorg.conf.new again. The screen went blank and turned off, so I reset the machine. There must be a way round this. Any help to set up a dual head config for Ubuntu using Config #1 would be hugely appreciated. TIA, Mike

    Read the article

  • KVM/Libvirt bridged/routed networking not working on newer guest kernels

    - by SharkWipf
    I have a dedicated server running Debian 6, with Libvirt (0.9.11.3) and Qemu-KVM (qemu-kvm-1.0+dfsg-11, Debian). I am having a problem getting bridged/routed networking to work in KVM guests with newer kernels (2.6.38). NATted networking works fine though. Older kernels work perfectly fine as well. The host kernel is at version 3.2.0-2-amd64, the problem was also there on an older host kernel. The contents of the host's /etc/network/interfaces (ip removed): # Loopback device: auto lo iface lo inet loopback # bridge auto br0 iface br0 inet static address 176.9.xx.xx broadcast 176.9.xx.xx netmask 255.255.255.224 gateway 176.9.xx.xx pointopoint 176.9.xx.xx bridge_ports eth0 bridge_stp off bridge_maxwait 0 bridge_fd 0 up route add -host 176.9.xx.xx dev br0 # VM IP post-up mii-tool -F 100baseTx-FD br0 # default route to access subnet up route add -net 176.9.xx.xx netmask 255.255.255.224 gw 176.9.xx.xx br0 The output of ifconfig -a on the host: br0 Link encap:Ethernet HWaddr 54:04:a6:8a:66:13 inet addr:176.9.xx.xx Bcast:176.9.xx.xx Mask:255.255.255.224 inet6 addr: fe80::5604:a6ff:fe8a:6613/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:20216729 errors:0 dropped:0 overruns:0 frame:0 TX packets:19962220 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:14144528601 (13.1 GiB) TX bytes:7990702656 (7.4 GiB) eth0 Link encap:Ethernet HWaddr 54:04:a6:8a:66:13 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:26991788 errors:0 dropped:12066 overruns:0 frame:0 TX packets:19737261 errors:270082 dropped:0 overruns:0 carrier:270082 collisions:1686317 txqueuelen:1000 RX bytes:15459970915 (14.3 GiB) TX bytes:6661808415 (6.2 GiB) Interrupt:17 Memory:fe500000-fe520000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:6240133 errors:0 dropped:0 overruns:0 frame:0 TX packets:6240133 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6081956230 (5.6 GiB) TX bytes:6081956230 (5.6 GiB) virbr0 Link encap:Ethernet HWaddr 52:54:00:79:e4:5a inet addr:192.168.100.1 Bcast:192.168.100.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:225016 errors:0 dropped:0 overruns:0 frame:0 TX packets:412958 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:16284276 (15.5 MiB) TX bytes:687827984 (655.9 MiB) virbr0-nic Link encap:Ethernet HWaddr 52:54:00:79:e4:5a BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) vnet0 Link encap:Ethernet HWaddr fe:54:00:93:4e:68 inet6 addr: fe80::fc54:ff:fe93:4e68/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:607670 errors:0 dropped:0 overruns:0 frame:0 TX packets:5932089 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:83574773 (79.7 MiB) TX bytes:1092482370 (1.0 GiB) vnet1 Link encap:Ethernet HWaddr fe:54:00:ed:6a:43 inet6 addr: fe80::fc54:ff:feed:6a43/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:922132 errors:0 dropped:0 overruns:0 frame:0 TX packets:6342375 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:251091242 (239.4 MiB) TX bytes:1629079567 (1.5 GiB) vnet2 Link encap:Ethernet HWaddr fe:54:00:0d:cb:3d inet6 addr: fe80::fc54:ff:fe0d:cb3d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:9461 errors:0 dropped:0 overruns:0 frame:0 TX packets:665189 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:4990275 (4.7 MiB) TX bytes:49229647 (46.9 MiB) vnet3 Link encap:Ethernet HWaddr fe:54:cd:83:eb:aa inet6 addr: fe80::fc54:cdff:fe83:ebaa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1649 errors:0 dropped:0 overruns:0 frame:0 TX packets:12177 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:77233 (75.4 KiB) TX bytes:2127934 (2.0 MiB) The guest's /etc/network/interfaces, in this case running Ubuntu 12.04 (ip removed): # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 176.9.xx.xx netmask 255.255.255.248 gateway 176.9.xx.xx # Host IP pointopoint 176.9.xx.xx # Host IP dns-nameservers 8.8.8.8 8.8.4.4 The output of ifconfig -a on the guest: eth0 Link encap:Ethernet HWaddr 52:54:cd:83:eb:aa inet addr:176.9.xx.xx Bcast:0.0.0.0 Mask:255.255.255.255 inet6 addr: fe80::5054:cdff:fe83:ebaa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14190 errors:0 dropped:0 overruns:0 frame:0 TX packets:1768 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2614642 (2.6 MB) TX bytes:82700 (82.7 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:954 errors:0 dropped:0 overruns:0 frame:0 TX packets:954 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:176679 (176.6 KB) TX bytes:176679 (176.6 KB) Output of ping -c4 on the guest: PING google.nl (173.194.35.151) 56(84) bytes of data. 64 bytes from muc03s01-in-f23.1e100.net (173.194.35.151): icmp_req=1 ttl=55 time=14.7 ms From static.174.82.xx.xx.clients.your-server.de (176.9.xx.xx): icmp_seq=2 Redirect Host(New nexthop: static.161.82.9.176.clients.your-server.de (176.9.82.161)) 64 bytes from muc03s01-in-f23.1e100.net (173.194.35.151): icmp_req=2 ttl=55 time=15.1 ms From static.198.170.9.176.clients.your-server.de (176.9.170.198) icmp_seq=3 Destination Host Unreachable From static.198.170.9.176.clients.your-server.de (176.9.170.198) icmp_seq=4 Destination Host Unreachable --- google.nl ping statistics --- 4 packets transmitted, 2 received, +2 errors, 50% packet loss, time 3002ms rtt min/avg/max/mdev = 14.797/14.983/15.170/0.223 ms, pipe 2 The static.174.82.xx.xx.clients.your-server.de (176.9.xx.xx) is the host's IP. I have encountered this problem with every guest OS I've tried, that being Fedora, Ubuntu (server/desktop) and Debian with an upgraded kernel. I've also tried compiling the guest kernel myself, to no avail. I have no problem with recompiling a kernel, though the host cannot afford any downtime. Any ideas on this problem are very welcome. EDIT: I can ping the host from inside the guest.

    Read the article

  • Again WPA Connection problem even after changed to latest version ..please help

    - by Renjith G
    I am using hostapd, wireless tools with madwifi for my wireless ap in my board. The WEP, WPA-PSK connections and communications between my board with linux and my desktop PC, Windows XP SP2 (with Olitec USB wireless) are fine. But when I configured the WPA type, the connection seems established but shows the status "TKIP - Key Absent" in the security dialog box. Anyone faced this problem? Am attaching the conf files and the connection status. In the AP side am complaining . I am using the in built radius server conf with the hostapd 0.4.7 hostapd.conf interface=ath0 driver=madwifi logger_syslog=0 logger_syslog_level=0 logger_stdout=0 logger_stdout_level=0 debug=0 eapol_key_index_workaround=1 dump_file=/tmp/hostapd.dump.0.0 ssid=Renjith G wpa wpa=1 wpa_passphrase=mypassphrase wpa_key_mgmt=WPA-EAP wpa_pairwise=TKIP CCMP wpa_group_rekey=600 macaddr_acl=2 /* commented */ ieee8021x=1 /* commented */ eap_authenticator=1 own_ip_addr=172.16.25.1 nas_identifier=renjithg.com auth_server_addr=172.16.25.1 auth_server_port=1812 auth_server_shared_secret=key1 ca_cert=/flash1/ca.crt server_cert=/flash1/server.crt eap_user_file=/etc/hostapd.eap_user hostapd.eap_user "*@renjithg.com" TLS And the commands am using are wlanconfig ath0 create wlandev wifi0 wlanmode ap iwconfig ath0 essid Renjith channel 6 ifconfig ath0 192.168.25.1 netmask 255.255.255.0 up hostapd -ddd /etc/hostapd.conf Please correct if am wrong .. Also am getting the debug messages on my AP when am connecting in my windows machine through WPA ~/wlanexe # ./hostapd -ddd /etc/hostapd.conf Configuration file: /etc/hostapd.conf Line 18: obsolete eap_authenticator used; this has been renamed to eap_server madwifi_set_iface_flags: dev_up=0 Using interface ath0 with hwaddr 00:0b:6b:33:8c:30 and ssid 'Renjith G wpa' madwifi_set_ieee8021x: enabled=1 madwifi_configure_wpa: group key cipher=1 madwifi_configure_wpa: pairwise key ciphers=0xa madwifi_configure_wpa: key management algorithms=0x1 madwifi_configure_wpa: rsn capabilities=0x0 madwifi_configure_wpa: enable WPA= 0x1 madwifi_set_iface_flags: dev_up=1 madwifi_set_privacy: enabled=1 WPA: group state machine entering state GTK_INIT GMK - hexdump(len=32): 9c 77 cd 38 5a 60 3b 16 8a 22 90 e8 65 b3 c2 86 40 5c be c3 dd 84 3e df 58 1d 16 61 1d 13 d1 f2 GTK - hexdump(len=32): 02 78 d7 d3 5d 15 e3 89 9c 62 a8 fe 8a 0f 40 28 ba dc cd bc 07 f4 59 88 1c 08 84 2b 49 3d e2 32 WPA: group state machine entering state SETKEYSDONE madwifi_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1 Flushing old station entries madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3 Deauthenticate all stations l2_packet_receive - recvfrom: Network is down Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 Wireless event: cmd=0x8c04 len=20 madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state DISCONNECTED WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 < Register Fail < Register Fail Wireless event: cmd=0x8c04 len=20 madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state DISCONNECTED WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 NOW am getting the following error message with latest tools. *This is the latest error messages..please refer this only..* ~/wlanexe # ./hostapd -ddd /etc/hostapd.conf TLS: Trusted root certificate(s) loaded madwifi_set_iface_flags: dev_up=0 madwifi_set_privacy: enabled=0 BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits) Flushing old station entries madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 3) Could not connect to kernel driver. Deauthenticate all stations madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=2 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 2) madwifi_set_privacy: enabled=0 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=0 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=1 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=2 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=3 Using interface ath0 with hwaddr 00:0b:6b:33:8c:30 and ssid 'RenjithGwpa' SSID - hexdump_ascii(len=11): 52 65 6e 6a 69 74 68 47 77 70 61 RenjithGwpa PSK (ASCII passphrase) - hexdump_ascii(len=12): 6d 79 70 61 73 73 70 68 72 61 73 65 mypassphrase PSK (from passphrase) - hexdump(len=32): a6 55 3e 76 94 8b d9 81 a1 22 5e 24 29 83 33 86 11 a8 7e 93 19 7c a9 ab ab cc 12 58 37 e5 35 b6 RADIUS local address: 172.16.25.1:1024 madwifi_set_ieee8021x: enabled=1 madwifi_configure_wpa: group key cipher=1 madwifi_configure_wpa: pairwise key ciphers=0xa madwifi_configure_wpa: key management algorithms=0x1 madwifi_configure_wpa: rsn capabilities=0x0 madwifi_configure_wpa: enable WPA=0x1 WPA: group state machine entering state GTK_INIT (VLAN-ID 0) GMK - hexdump(len=32): [REMOVED] GTK - hexdump(len=32): [REMOVED] WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0) madwifi_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1 madwifi_set_privacy: enabled=1 madwifi_set_iface_flags: dev_up=1 ath0: Setup of interface done. l2_packet_receive - recvfrom: Network is down Wireless event: cmd=0x8b1a len=24 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09 Wireless event: cmd=0x8c04 len=20 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09 Data frame from not associated STA 00:0a:78:a0:0b:09 Data frame from not associated STA 00:0a:78:a0:0b:09 Wireless event: cmd=0x8c04 len=20 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09

    Read the article

  • Gratuitous CRLF in Subject: line - why is it there, and is it legal?

    - by MadHatter
    I'm running into a problem with a NAGIOS system sending emails to a popular email-to-SMS service. The email-to-SMS service takes emails with text in the Subject: line, and sends them on to the mobile number encoded in the To: field. So far so good. Sadly, sendmail (and postfix before it) seem to be inserting a gratuitous CRLF into the (necessarily long) Subject: line, and that's causing my SMS messages to be truncated at the CRLF if and only if the Subject: line contains one or more colons past the gratuitous CRLF. I am confident that the messages are being created correctly, but just to be sure, here's me creating a completely noddy test message to myself, with a long Subject: line: echo "foo" | mail -s "1234567 101234567 201234567 301234567 401234567 501234567 601234567 701234567 801234567 90123456789" [email protected] Note there's no extra colon in this Subject: line; all I'm doing here is showing that an extra CRLF is inserted on the wire. Here's the result of sudo ngrep -x port 25: 44 61 74 65 3a 20 46 72    69 2c 20 33 31 20 4d 61    Date: Fri, 31 Ma 79 20 32 30 31 33 20 31    30 3a 34 33 3a 35 35 20    y 2013 10:43:55 2b 30 31 30 30 0d 0a 54    6f 3a 20 72 65 61 70 65    +0100..To: reape 72 40 74 65 61 70 61 72    74 79 2e 6e 65 74 0d 0a    [email protected].. 53 75 62 6a 65 63 74 3a    20 31 32 33 34 35 36 37    Subject: 1234567 20 31 30 31 32 33 34 35    36 37 20 32 30 31 32 33     101234567 20123 34 35 36 37 20 33 30 31    32 33 34 35 36 37 20 34    4567 301234567 4 30 31 32 33 34 35 36 37    20 35 30 31 32 33 34 35    01234567 5012345 36 37 0d 0a 20 36 30 31    32 33 34 35 36 37 20 37    67.. 601234567 7 30 31 32 33 34 35 36 37    20 38 30 31 32 33 34 35    01234567 8012345 36 37 20 39 30 31 32 33    34 35 36 37 38 39 0d 0a    67 90123456789.. 55 73 65 72 2d 41 67 65    6e 74 3a 20 48 65 69 72    User-Agent: Heir 6c 6f 6f 6d 20 6d 61 69    6c 78 20 31 32 2e 34 20    loom mailx 12.4 37 2f 32 39 2f 30 38 0d    0a 4d 49 4d 45 2d 56 65    7/29/08..MIME-Ve 72 73 69 6f 6e 3a 20 31    2e 30 0d 0a 43 6f 6e 74    rsion: 1.0..Cont 65 6e 74 2d 54 79 70 65    3a 20 74 65 78 74 2f 70    ent-Type: text/p 6c 61 69 6e 3b 20 63 68    61 72 73 65 74 3d 75 73    lain; charset=us About half way down (marked in bold+italic), between the 501234567 and the 601234567 in the original Subject: header, you can see a CRLF being inserted (0x0d 0x0a, on the left-hand side hex dump, .. on the right-hand side plain text). The receiving MTA seems happy to post-process this, and when I look at the on-disc stored mail at the receiving end, I see only a LF (0x0a) in the Subject: line, and the line is parsed correctly and in its entirety by, eg, alpine. Nevertheless, the CRLF is there on the wire, and between me and the (excellent) email-to-SMS support people, we've established that these are the cause of the problem. So my question is: is it lawful for an MTA to insert a gratuitous CRLF on the wire? If it is, and I can prove it, then it's the email-to-SMS house's problem, because they are being intolerant. If it isn't, or it is but I can't prove it, then it becomes my problem, so an answer with references would be most useful. Edit: I can now come clean that the email-to-SMS service in question is kapow. Once this problem was explained to them, they got it, worked with me to develop and test a fix, and have deployed the fix. My long subject lines with colons in now get relayed correctly into SMSes. I don't normally trumpet individual companies, especially not on SF, but I thought it worthy of note that kapow Did The Right Thing. (Disclaimer: I have no connection with kapow except as a paying customer who's happy about the way they dealt with his problem.)

    Read the article

  • Dual head setup for Ubuntu 10.04.1 and Windows XP Pro with same hardware configuration

    - by mejpark
    I have a Dell OptiPlex 360 workstation at work, with 2 x ATI RV280 [Radeon 9200 PRO] graphics cards installed, which are attached to two identical 19" HII flat panel monitors. I'm using the open source Radeon driver with Ubuntu, and the proprietary drivers with Windows. The good news is that dual head configuration works for both OSes. The bad news is, I have to use a different hardware configuration for each OS to achieve this. Hardware config #1: Dual monitors work for Windows XP Pro like this: First display -> external VGA port Second display -> DVI input on gfx card Hardware config #2: Dual monitors work for Ubuntu 10.04.1 like this: First display -> VGA port on gfx card Second display -> DVI input on gfx card I connected up the displays according to Config #2 and booted up Windows, which resulted in a mirror image on both screens. I was unable to login, as the login box was not visible. I unplugged the VGA lead from gfx card and plugged it into the external VGA port (Config #1) - Windows dual head works again, but the VGA-connected screen is not recognised by Ubuntu and remains in standby mode. Is it possible to configure a dual head setup for Ubuntu using Config #1, or am I missing something? I tried setting up dual monitors using Config #1, this morning which didn't work. By default, there is no xorg.conf file in Ubuntu 10.04.1, so I generated one using: $ sudo X :2 -configure X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux harrier 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a34c1931-98d4-4a34-880c-c227a2936c4a ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.2.log", Time: Mon Sep 13 10:02:02 2010 List of video drivers: apm ark intel mach64 s3virge trident mga tseng ati nouveau neomagic i740 openchrome voodoo s3 i128 radeon siliconmotion nv ztv vmware v4l chips rendition savage sisusb tdfx geode sis r128 cirrus fbdev vesa (++) Using config file: "/home/michael/xorg.conf.new" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting. Xorg detected your mouse at device /dev/input/mice. Please check your config if the mouse is still not operational, as by default Xorg tries to autodetect the protocol. Xorg has configured a multihead system, please check your config. Your xorg.conf file is /home/michael/xorg.conf.new To test the server, run 'X -config /home/michael/xorg.conf.new' ddxSigGiveUp: Closing log $ sudo X -config /home/michael/xorg.conf.new Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. Please consult the The X.Org Foundation support at http://wiki.x.org for help. ddxSigGiveUp: Closing log I then booted Ubuntu in failsafe mode, dropped into root shell, and executed $ X -config /home/michael/xorg.conf.new again. The screen went blank and turned off, so

    Read the article

  • Add a small RAID card? Will it help overall stability and performance of my nine hard drives?

    - by Ray
    Hi, Will I get any extra genuine added performance and RAID stability if I insert a basic RAID card into a PCI-E x1 slot? I am considering the Adaptec 1220SA - 2 port SATA , pci-express (1x) , raid 0/1. Ok it only supports two SATA drives. Purpose is to help support the eight internal hard drives (1TB each), a DVD drive and an external e-SATA connected 2TB hard drive - by dealing with two of the internal hard drives. My current configuration of eight internal 1TB Barracuda (7200.12) SATA hard drives, one external 2TB SATA Western Digital Green Drive (e-SATA) and one DVD drive can already be supported by the Intel P55 & JMicron controllers on the ASUS motherboard : the Intel P55 (controls six HDD; configured as three x RAID 1), and the JMicron (controls two HDD as one RAID 1, as well as the DVD drive and the external SATA drive via the motherboard's e-SATA port (controlled by the JMicron)). Bigger picture details : I have an ASUS motherboard designed for the LGA1156 type processor and it includes the Intel P55 Express Chipset and JMicron. I am using the Intel Core i7-870 processor, and have 8GB DDR3 (1333) memory (four x 2GB Corsair DIMMs). Enough overall power. The power supply is more than sufficicient for the system. Corsair AX850. The system will never need the full 850 watts (future : second graphics card). The RAID card would provide hardware RAID 1 for two of the eight intrnal drives. It would either reduce the load on : the Intel P55 firmware RAID support, or replace the JMicron controller's RAID 1 set. I am busy installing the above configuration using Windows 7 Ultimate 64-bit as the OS. The RAID card is a last minute addition to the plan. Is it worth spending the extra R700 - R900 on the Adaptec 1220SA, or equivalent RAID card? I cannot afford to spend yet another R2000 - R3000 on a RAID card that would support many SATA2 hard drives, with a better RAID, example the RAID 5. My Issue & assumption : I am trusting that the Intel P55 chipset can properly handle six drives, configured as three * RAID 1. I am assuming that the JMicron can handle, using its RED SATA ports, one RAID-1 (two HDDs). The DVD drive connects to the JMicron optical SATA port 1 (white port 1). White port 2 is not used. The e-SATA connection is from the JMicron straight to, and through the motherboard - to an on-board (rear panel) e-SATA port. Am I being a little hopeful in only using the on-board Intel P55 and the JMicron? Is it a waste of money to install a RAID card that handles two SATA2 drives? OR Is it wisdom to take the pressure a little off the Intel P55? Obviously I am interested in data security, hence RAID 1, not RAID Zero. RAID 5 would be nice. The CPU, Intel Core i7-870 will provide the clout. Context to nine drives : I am using virtualisation with Windows 7 Ultimate. Bootable VMs. The operating system gets a mirror. Loaded apps gets a mirror. The current design data is kept in another mirror and Another mirror is back-up one and / or VM territory. Then the external 2TB drive (via e-SATA) is the next layer of data security and then finally, I use off-site data security. Thanks.

    Read the article

  • ubuntu 10.04; kvm bridged networking not working with public ip addresses

    - by senorsmile
    I have a dedicated hosted server box with ubuntu 10.04 64 bit installed. I would like to run kvm with ubuntu 8.04 installed for some php 5.2 compatible apps(they don't work right with php 5.3, the default in ubuntu 10.04). I installed KVM as instructed at https://help.ubuntu.com/community/KVM/Installation . I installed the vm using virt-manager. I never could figure out how use virt-install or any of those automated installers. I just installed it using the disc. I set up bridged networking as per https://help.ubuntu.com/community/KVM/Networking . However, the bridged connection doesn't work. Here's my /etc/network/interfaces on the host, running ubuntu 10.04. (with specific public ip blanked) auto lo iface lo inet loopback auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address xx.xx.xx.xx netmask 255.255.255.248 gateway xx.xx.xx.xa bridge_ports eth0 bridge_stp on bridge_fd 0 bridge_maxwait 10 ` Here's my /etc/network/interfaces on the guest, running ubuntu 8.04. auto lo iface lo inet loopback auto eth0 iface eth0 inet static address xx.xx.xx.xy netmask 255.255.255.248 gateway xx.xx.xx.xa The two vm's can communicate to each other. But, the guest vm can't access anyone in the real world. Here's my /etc/libvirt/qemu/store_804.xml <domain type='kvm'> <name>store_804</name> <uuid>27acfb75-4f90-a34c-9a0b-70a6927ae84c</uuid> <memory>2097152</memory> <currentMemory>2097152</currentMemory> <vcpu>2</vcpu> <os> <type arch='x86_64' machine='pc-0.12'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/store_804.img'/> <target dev='hda' bus='ide'/> </disk> <disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hdc' bus='ide'/> <readonly/> </disk> <interface type='bridge'> <mac address='52:54:00:26:0b:c6'/> <source bridge='br0'/> <model type='virtio'/> </interface> <console type='pty'> <target port='0'/> </console> <console type='pty'> <target port='0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes'/> <sound model='es1370'/> <video> <model type='cirrus' vram='9216' heads='1'/> </video> </devices> </domain> Any idea where I've gone wrong?

    Read the article

  • Only One GPU Detected in the Nvidia Quadra NVS 450

    - by Kyle Brandt
    I just built myself an new workstation and now only 2 of 3 monitors are working. I built the nvidia driver by downloading it and installing with ./Nvidia... Before when I ran nvidia-settings I saw two GPUs listed but now I only see one. Xorg Config (Not sure how I ended up with 3 devices in there): # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:39 PDT 2010 Section "ServerLayout" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+275, DFP-3: nvidia-auto-select +1680+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-3" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-3: nvidia-auto-select +1680+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "DFP-3: nvidia-auto-select +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection lscpi: 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) 00:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) 00:11.0 PIC: Intel Corporation 5520/5500 Physical and Link Layer Registers Port 1 (rev 13) 00:11.1 PIC: Intel Corporation 5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) 00:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:15.0 PIC: Intel Corporation 5520/5500/X58 Trusted Execution Technology Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 01:00.0 IDE interface: Device 1b4b:91a3 (rev 11) 02:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) 03:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:02.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 05:00.0 3D controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 06:00.0 VGA compatible controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 08:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 08:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0b:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

    Read the article

  • Installing chrome in Centos 6.2 (Final)

    - by usjes
    I need to install chrome in a dedicated centos server where I only access via ssh, it doesn't have X or any windows graphical stuff. I need it to be able to pack extensions using google-chrome --pack-extension. I tried adding this to /etc/yum.repos.d/google.repo [google-chrome] name=google-chrome - 32-bit baseurl=http://dl.google.com/linux/chrome/rpm/stable/i386 enabled=1 gpgcheck=1 gpgkey=https://dl-ssl.google.com/linux/linux_signing_key.pub And then yum install google-chrome-stable, but there's a huge list of dependencies problems: How can I install chrome without breaking anything else? UPDATE: Ok, I installed perl-CGI from .rpm because yum couldn't find it, now dependencies resolve and it show me this list of packages to install: Dependencies Resolved ============================================================================================================================================================================================================================================= Package Arch Version Repository Size ============================================================================================================================================================================================================================================= Installing: google-chrome-stable x86_64 19.0.1084.52-138391 google-chrome 35 M Installing for dependencies: ConsoleKit x86_64 0.4.1-3.el6 base 82 k ConsoleKit-libs x86_64 0.4.1-3.el6 base 17 k GConf2 x86_64 2.28.0-6.el6 base 964 k ORBit2 x86_64 2.14.17-3.1.el6 base 168 k bc x86_64 1.06.95-1.el6 base 110 k cdparanoia-libs x86_64 10.2-5.1.el6 base 47 k cups x86_64 1:1.4.2-44.el6_2.3 updates 2.3 M dbus x86_64 1:1.2.24-5.el6_1 base 207 k desktop-file-utils x86_64 0.15-9.el6 base 47 k ed x86_64 1.1-3.3.el6 base 72 k eggdbus x86_64 0.6-3.el6 base 91 k foomatic x86_64 4.0.4-1.el6_1.1 base 251 k foomatic-db noarch 4.0-7.20091126.el6 base 980 k foomatic-db-filesystem noarch 4.0-7.20091126.el6 base 4.4 k foomatic-db-ppds noarch 4.0-7.20091126.el6 base 19 M ghostscript x86_64 8.70-11.el6_2.6 updates 4.4 M ghostscript-fonts noarch 5.50-23.1.el6 base 751 k gstreamer x86_64 0.10.29-1.el6 base 764 k gstreamer-plugins-base x86_64 0.10.29-1.el6 base 942 k gstreamer-tools x86_64 0.10.29-1.el6 base 23 k iso-codes noarch 3.16-2.el6 base 2.4 M lcms-libs x86_64 1.19-1.el6 base 100 k libIDL x86_64 0.8.13-2.1.el6 base 83 k libXScrnSaver x86_64 1.2.0-1.el6 base 19 k libXfont x86_64 1.4.1-2.el6_1 base 128 k libXv x86_64 1.0.5-1.el6 base 21 k libfontenc x86_64 1.0.5-2.el6 base 24 k libgudev1 x86_64 147-2.40.el6 base 59 k libmng x86_64 1.0.10-4.1.el6 base 165 k libogg x86_64 2:1.1.4-2.1.el6 base 21 k liboil x86_64 0.3.16-4.1.el6 base 121 k libtheora x86_64 1:1.1.0-2.el6 base 129 k libvisual x86_64 0.4.0-9.1.el6 base 135 k libvorbis x86_64 1:1.2.3-4.el6_2.1 updates 168 k mailx x86_64 12.4-6.el6 base 234 k man x86_64 1.6f-29.el6 base 263 k mesa-libGLU x86_64 7.11-3.el6 base 201 k nvidia-graphics195.30-libs x86_64 195.30-120.el6 atrpms 13 M openjpeg-libs x86_64 1.3-7.el6 base 59 k pax x86_64 3.4-10.1.el6 base 69 k phonon-backend-gstreamer x86_64 1:4.6.2-20.el6 base 125 k polkit x86_64 0.96-2.el6_0.1 base 158 k poppler x86_64 0.12.4-3.el6_0.1 base 557 k poppler-data noarch 0.4.0-1.el6 base 2.2 M poppler-utils x86_64 0.12.4-3.el6_0.1 base 73 k portreserve x86_64 0.0.4-4.el6_1.1 base 22 k qt x86_64 1:4.6.2-20.el6 base 4.0 M qt-sqlite x86_64 1:4.6.2-20.el6 base 50 k qt-x11 x86_64 1:4.6.2-20.el6 base 12 M qt3 x86_64 3.3.8b-30.el6 base 3.5 M redhat-lsb x86_64 4.0-3.el6.centos base 24 k redhat-lsb-graphics x86_64 4.0-3.el6.centos base 12 k redhat-lsb-printing x86_64 4.0-3.el6.centos base 11 k sgml-common noarch 0.6.3-32.el6 base 43 k time x86_64 1.7-37.1.el6 base 26 k tmpwatch x86_64 2.9.16-4.el6 base 31 k xdg-utils noarch 1.0.2-17.20091016cvs.el6 base 58 k xml-common noarch 0.6.3-32.el6 base 9.5 k xorg-x11-font-utils x86_64 1:7.2-11.el6 base 75 k xz x86_64 4.999.9-0.3.beta.20091007git.el6 base 137 k xz-lzma-compat x86_64 4.999.9-0.3.beta.20091007git.el6 base 16 k Transaction Summary ============================================================================================================================================================================================================================================= Install 62 Package(s) Is it safe to continue and install all that or could I break something already installed?

    Read the article

  • Only One GPU Detected in the Nvidia Quadro NVS 450

    - by Kyle Brandt
    I just built myself an new workstation and now only 2 of 3 monitors are working. I built the nvidia driver by downloading it and installing with ./Nvidia... Before when I ran nvidia-settings I saw two GPUs listed but now I only see one. Xorg Config (Not sure how I ended up with 3 devices in there): # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:39 PDT 2010 Section "ServerLayout" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+275, DFP-3: nvidia-auto-select +1680+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-3" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-3: nvidia-auto-select +1680+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "DFP-3: nvidia-auto-select +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection lscpi: 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) 00:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) 00:11.0 PIC: Intel Corporation 5520/5500 Physical and Link Layer Registers Port 1 (rev 13) 00:11.1 PIC: Intel Corporation 5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) 00:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:15.0 PIC: Intel Corporation 5520/5500/X58 Trusted Execution Technology Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 01:00.0 IDE interface: Device 1b4b:91a3 (rev 11) 02:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) 03:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:02.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 05:00.0 3D controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 06:00.0 VGA compatible controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 08:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 08:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0b:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

    Read the article

  • How to diagnose and solve an erratic "HDCP Support Required"?

    - by Jom Orgstrom
    I am playing a digital tv broadcast on Windows Media Center for Windows 7. I built this system so it works with HDCP, and in fact I have been able to watch tv and bluray before with this same computer. However, I suddenly started getting an "HDCP Support Required" error from WMC. The entire message is as follows: HDCP Support Required High-bandwidth Digital Content Protection (HDCP) may not be supported by the current video card. Use an HDCP-compliant display, video card, and video driver. Or, connect using an analog connection such as component or VGA. Relevant specs are: CPU: Ivy Bridge Core i7-3770 Motherboard: Asus P8H77-I Memory: 16GB DDR3-1600 Graphics: Radeon HD 7850 (Driver by AMD, version 8.982.0.0 built on 2012/07/27) Display: Acer P243w connected by HDMI Sound: Roland Quad-Capture (It complains even when I use the bundled VIA HD Audio) TV Tuner: I-O Data GV-MC7/HZ3 OS: Windows 7 Professional SP1, Windows Update enabled. All patched and up to date. As you can see, there is nothing weird or old about my setup. I am also not doing anything strange, not doing any overclocking, weird system changes and so on. One thing that does happen from time to time, is that the display goes black for a few seconds (sometimes when watching media contents, sometimes when just using photoshop or Visual Studio). This happened with my previous setup as well, so I'd be inclined to think it is a display or cable issue (apart from the BD drive, these are the only things I kept from my previous setup to this one). But being a digital transfer, as far as I know, these things either work or not. Never erratically or with decreased quality. The thing is that sometimes I can watch the TV, sometimes not. This happens with recorded programs as well, so it's not a per-program thing. Sometimes rebooting helps, sometimes it doesn't. Sometimes unplugging and plugging back the HDMI connector helps, sometimes it doesn't. Sometimes doing so doesn't even turn the screen back on, so I have to reboot. Unfortunately, WMC's error message is quite unhelpful. I'd like to know exactly where the problem is, so I can solve it. I don't want to buy a brand new display just to then find out it was a registry setting that was misconfigured. I've tried looking at the system event viewer, but these errors don't show up at all in there. Other people who have this problem seem to have a setup that is not HDCP compliant, so I turn to you guys here. Anybody knows how to diagnose this problem? Edit: So I got the Cyberlink Blu-ray disc advisor. I ran it and told me everything was okay, except for the Video Connection Type, which showed as "Digital (without HDCP)". I then proceeded to unplug the power cable from the monitor, plugged it in again, ran the tool again, and now it's "Digital (with HDCP)". Needless to say, I can watch my TV and recorded programs on WMP again. I'm guessing that at some point, something may be slightly wrong with the HDCP setup, and Windows decides to reset the entire content protection path (which leads to the screen blanking out). Usually the reset succeeds, but sometimes it doesn't, so Windows defaults to turning HDCP off. There's no way to turn it back on, except by doing a hard reset of the display. I really want to know what the exact error was, so I can fix it. Is it the cable? is it the display? is it the video card? the driver? Also, is there any other way to try and turn HDCP on again without having to hard reset the display? Oh, questions, questions...

    Read the article

  • Computer not POSTing "randomly"?

    - by smoth190
    I have a custom built PC that is exhibiting some...odd... behavior, something I've never seen before. It was working fine one day, and the next day, it wouldn't start. Seeing as I wanted an upgrade anyway, I purchased a new motherboard that was compatible with all my parts. While replacing the motherboard, I accidentally damaged the CPU. Well, I wanted a new one anyway... so I got a new one. Seeing as I was replacing a ton of parts already, I bought a new PSU because the old one was super loud. When I slapped it all together, it starts up, lights, fans, drives, they all start. But I get no display from the monitor. No beeps, which I believe means it doesn't POST. I figured it was the RAM, because after removing the sound card and graphics card, there was nothing else that I hadn't replaced. When I remove both sticks of RAM, I get a continuous beeping, and according to the mobo handbook, means no RAM. So I think the mobo is functional, or atleast partly. I bought new RAM, but it still didn't work. I tried 3 monitors, with both VGA and DIV. So it's probably not the monitor, either. Now, let me get to the random part. Every 20 or so boots (I should also mention, for about 3 out of 5 boots I have to unplug the PC because it won't powerdown via the button), it will POST and I'll get display. Then, after about 2 or 3 resets, it won't work again. This confuses me so much, because even when I change nothing, it will/will not work. My thought is that maybe it has something to do with the RAM not clearing or something. I also reset the CMOS battery, incase that had anything to do with it, but no eval. I found some weird suggestion online about holding the power button for 30 seconds while it was unplugged. That did nothing, but I didn't expect it would... I've replaced just about the entire computer, and all the parts are compatible. Done about everything I can think of, but nothing has worked. Hopefully someone can help me here. And as I side note: When I do get my computer to boot, it says my hardware has changed and I have to re-activate windows. But it says I have to call Microsoft to do it. So I get this fancy automated voice that asks me to enter in a code into windows, then it asks me "How many computers have you activated with this copy of Windows?". Well, I had it on my computer before I replaced everything, so I said 1. Then he yelled at me for violating my 1-use license. I dunno what's going on there, do I have to re-purchase Windows 7? And they wonder why people pirate software... That's just a bonus question, though. Specs: 8GB of DDR2 RAM (Corsair) AMD CPU (I don't know what GHz or model because I can't find the box... (I think its 4 cores of 2.8Ghz) ASRock A785GM-LE Motherboard

    Read the article

  • Windows 7 is stuck at "Starting Windows" when I attempt to boot computer

    - by Eli
    Basically, whenever I turn on my computer, it gets to the Starting Windows phase and just stays there. The startup animation still plays, yet it gets nowhere. I have tried booting into safe mode, however it gets stuck at loading CLASSPNP.SYS. It then freezes there and doesn't continue booting. I have tried booting into recovery mode from the hard drive, and it freezes after displaying the background image. I have tried booting from a recovery CD, which works, and I was able to use system restore. However, using system restore did not fix it, and it still is stuck at the Starting Windows screen. I have tried booting a Windows CD (Windows 8 Retail Installer) to see if I could upgrade it to fix this issue, however that froze at a blank screen after it got past the boot logo. I have tried changing around the BIOS settings (including resetting), to no avail. I have tried re-plugging the internal PSU cables (this is a custom-built desktop), yet this has changed nothing. I can boot into a loopback Ubuntu install on the same drive, which works fine, other than the fact that it has issues with some of the USB ports and the network card. This system has worked fine for the past few months, completely stable, and nothing in the configuration has changed before this error started happening. Startup Repair on the Windows recovery CD doesn't find any issues. Unplugging my secondary hard drive or swapping around memory doesn't change anything. The hard drive itself is fine, it hasn't shown any signs of failure and once again, boots my other OS fine. If anyone could help with this, that would be great. I can't seem to find any possible solution to this. If it makes any difference, my system specs are as follows: AMD FX-8320 Gigabyte GA-970A-D3 4GB of DDR3 Radeon HD 6870 550w PSU I'd like to not have to reinstall Windows, for I have more than a terabyte of data that I would have to back up if that becomes the only option. EDIT: I have since tried the following: Tried the solution involving restoring files from RegBackup, which changed nothing. Tried testing everything with Hiren's boot CD, everything comes back as fine. Tried disabling everything unnecessary in the BIOS and unplugging everything unneeded, it still hangs. Tried swapping out every possible combination of RAM, it still has the same result. The RAM is not at fault it seems Tried every GPU I own (which is many!) and it still hangs at the exact same place. Tried minimizing the power consumption as much as possible, even using an old PCI graphics card. It still hangs at the same place in the same way, signifying that it's not the PSU at fault. Tried resetting the BIOS again, still nothing. Tried every possible combination of BIOS options, even downclocking everything, it still hangs in the same spot. Tried upgrading the BIOS from version FB to FD, which changed nothing. Based on this, I would conclude the motherboard to be at fault. Are there any other possibilities? I don't want to spend $150 for a new motherboard. EDIT 2: This is what it gets stuck at when I try to boot into safe mode: Note the slight graphical corruption at the top of the screen. No matter how I set up the system, this seems to be there. In addition, either it has stopped booting into safe mode now, or it takes upwards of 2+ hours, and I haven't left it running for that long.

    Read the article

  • LinkedIn API returns 'Unauthorized' response (PHP OAuth)

    - by Jim Greenleaf
    I've been struggling with this one for a few days now. I've got a test app set up to connect to LinkedIn via OAuth. I want to be able to update a user's status, but at the moment I'm unable to interact with LinkedIn's API at all. I am able to successfully get a requestToken, then an accessToken, but when I issue a request to the API, I see an 'unauthorized' error that looks something like this: object(OAuthException)#2 (8) { ["message:protected"]=> string(73) "Invalid auth/bad request (got a 401, expected HTTP/1.1 20X or a redirect)" ["string:private"]=> string(0) "" ["code:protected"]=> int(401) ["file:protected"]=> string(47) "/home/pmfeorg/public_html/dev/test/linkedin.php" ["line:protected"]=> int(48) ["trace:private"]=> array(1) { [0]=> array(6) { ["file"]=> string(47) "/home/pmfeorg/public_html/dev/test/linkedin.php" ["line"]=> int(48) ["function"]=> string(5) "fetch" ["class"]=> string(5) "OAuth" ["type"]=> string(2) "->" ["args"]=> array(2) { [0]=> string(35) "http://api.linkedin.com/v1/people/~" [1]=> string(3) "GET" } } } ["lastResponse"]=> string(358) " 401 1276375790558 0000 [unauthorized]. OAU:Bhgk3fB4cs9t4oatSdv538tD2X68-1OTCBg-KKL3pFBnGgOEhJZhFOf1n9KtHMMy|48032b2d-bc8c-4744-bb84-4eab53578c11|*01|*01:1276375790:xmc3lWhXJvLSUZh4dxMtrf55VVQ= " ["debugInfo"]=> array(5) { ["sbs"]=> string(329) "GET&http%3A%2F%2Fapi.linkedin.com%2Fv1%2Fpeople%2F~&oauth_consumer_key%3DBhgk3fB4cs9t4oatSdv538tD2X68-1OTCBg-KKL3pFBnGgOEhJZhFOf1n9KtHMMy%26oauth_nonce%3D7068001084c13f2ee6a2117.22312548%26oauth_signature_method%3DHMAC-SHA1%26oauth_timestamp%3D1276375790%26oauth_token%3D48032b2d-bc8c-4744-bb84-4eab53578c11%26oauth_version%3D1.0" ["headers_sent"]=> string(401) "GET /v1/people/~?GET&oauth_consumer_key=Bhgk3fB4cs9t4oatSdv538tD2X68-1OTCBg-KKL3pFBnGgOEhJZhFOf1n9KtHMMy&oauth_signature_method=HMAC-SHA1&oauth_nonce=7068001084c13f2ee6a2117.22312548&oauth_timestamp=1276375790&oauth_version=1.0&oauth_token=48032b2d-bc8c-4744-bb84-4eab53578c11&oauth_signature=xmc3lWhXJvLSUZh4dxMtrf55VVQ%3D HTTP/1.1 User-Agent: PECL-OAuth/1.0-dev Host: api.linkedin.com Accept: */*" ["headers_recv"]=> string(148) "HTTP/1.1 401 Unauthorized Server: Apache-Coyote/1.1 Date: Sat, 12 Jun 2010 20:49:50 GMT Content-Type: text/xml;charset=UTF-8 Content-Length: 358" ["body_recv"]=> string(358) " 401 1276375790558 0000 [unauthorized]. OAU:Bhgk3fB4cs9t4oatSdv538tD2X68-1OTCBg-KKL3pFBnGgOEhJZhFOf1n9KtHMMy|48032b2d-bc8c-4744-bb84-4eab53578c11|*01|*01:1276375790:xmc3lWhXJvLSUZh4dxMtrf55VVQ= " ["info"]=> string(216) "About to connect() to api.linkedin.com port 80 (#0) Trying 64.74.98.83... connected Connected to api.linkedin.com (64.74.98.83) port 80 (#0) Connection #0 to host api.linkedin.com left intact Closing connection #0 " } } My code looks like this (based on the FireEagle example from php.net): $req_url = 'https://api.linkedin.com/uas/oauth/requestToken'; $authurl = 'https://www.linkedin.com/uas/oauth/authenticate'; $acc_url = 'https://api.linkedin.com/uas/oauth/accessToken'; $api_url = 'http://api.linkedin.com/v1/people/~'; $callback = 'http://www.pmfe.org/dev/test/linkedin.php'; $conskey = 'Bhgk3fB4cs9t4oatSdv538tD2X68-1OTCBg-KKL3pFBnGgOEhJZhFOf1n9KtHMMy'; $conssec = '####################SECRET KEY#####################'; session_start(); try { $oauth = new OAuth($conskey,$conssec,OAUTH_SIG_METHOD_HMACSHA1,OAUTH_AUTH_TYPE_URI); $oauth->enableDebug(); if(!isset($_GET['oauth_token'])) { $request_token_info = $oauth->getRequestToken($req_url); $_SESSION['secret'] = $request_token_info['oauth_token_secret']; header('Location: '.$authurl.'?oauth_token='.$request_token_info['oauth_token']); exit; } else { $oauth->setToken($_GET['oauth_token'],$_SESSION['secret']); $access_token_info = $oauth->getAccessToken($acc_url); $_SESSION['token'] = $access_token_info['oauth_token']; $_SESSION['secret'] = $access_token_info['oauth_token_secret']; } $oauth->setToken($_SESSION['token'],$_SESSION['secret']); $oauth->fetch($api_url, OAUTH_HTTP_METHOD_GET); $response = $oauth->getLastResponse(); } catch(OAuthException $E) { var_dump($E); } I've successfully set up a connection to Twitter and one to Facebook using OAuth, but LinkedIn keeps eluding me. If anyone could offer some advice or point me in the right direction, I will be extremely appreciative!

    Read the article

  • Mac - Flash file not loaded in independent flash player

    - by Mugdha
    Hi, I am working on an independent application to play flash files on Mac. I have already done the same for Linux, and it works flawlessly but on mac for some reason flash is not drawing to my window. It is not throwing any kind of error too. I am using Flash player 10, that would mean that I am using the Core Graphics drawing model. I am able to send mouse events to flash and wrote a sample plugin to check if there was a problem in the context that I was sending, but my sample plugin draws properly to the window. I am getting a call for NPN_InvalidateRect twice and as a response I send an update Event back to flash. I drew a dummy rectangle to check that my context is correct. I have flipped the context to make the origin as top left corner. On doing right click on the debug version of the flash player it shows the following message: "Movie not loaded..." Can anyone give me any idea why is the content not being drawn? I would really appreciate the help, as I have been struggling with it for more than a month now. Here is a small log of the interaction that I have with flash: NPN_UserAgent Called NPN_GetValue Called with variable NPNVWindowNPObject; return NULL NPN_GetValue Called with variable NPNVWindowNPObject; return NULL NPN_GetValue Called with variable NPNVSupportsWindowless; return true NPN_SetValue Called for Variable - NPPVpluginTransparentBool; return true NPN_GetValue Called with variable NPNVsupportsCoreGraphicsBool; return true NPN_SetValue Called for Variable - NPNVpluginDrawingModel NPP_SetWindow (CoreGraphics): 0, window=0xebaa90, context=0xe4c930, window.x:0 window.y:22 window.width:480 window.height:270 NPP_HandleEvent(activateEvent) accepted:0 isActive: 1 NPP_HandleEvent(updateEvt) accepted: 1 NPN_UserAgent Called NPN_GetURLNotify Called with URL - javascript:top.location+"flashplugin_unique" NPN_GetValue Called with variable NPNVWindowNPObject; return NULL NPP_NewStream URL=/Users/mjain/Desktop/clock.swf MIME=application/x-shockwave-flash error=0 NPP_WriteReady responseURL=/Users/mjain/Desktop/clock.swf bytes=268435455 NPN_InvalidateRect Called NPP_Write responseURL=/Users/mjain/Desktop/clock.swf bytes=9925 total-delivered=9925/9925 NPP_WriteReady responseURL=/Users/mjain/Desktop/clock.swf bytes=268435455 NPP_DestroyStream responseURL=/Users/mjain/Desktop/clock.swf error=0 NPP_HandleEvent(updateEvt) accepted: 1 NPN_InvalidateRect Called NPP_HandleEvent(updateEvt) accepted: 1 NPP_NewStream URL=javascript:top.location+"flashplugin_unique" MIME=text/plain error=0 NPP_WriteReady responseURL=javascript:top.location+"flashplugin_unique" bytes=16000 NPN_UserAgent Called NPP_Write responseURL=javascript:top.location+"flashplugin_unique" bytes=52 total-delivered=52/52 NPP_WriteReady responseURL=javascript:top.location+"flashplugin_unique" bytes=16000 NPP_DestroyStream responseURL=javascript:top.location+"flashplugin_unique" error=0 NPP_URLNotify responseURL=javascript:top.location+"flashplugin_unique" reason=0 Thanks Mugdha.

    Read the article

  • Getting problem while capturing image through web cam in Java -OpenCV code.

    - by Chetan
    Hi.. I am developing Face detector using OpenCV library in java... I have written sample code for this,but it is giving Error while capturing image. can any one help please. Here is the code import java.awt.; import java.awt.event.; import java.awt.image.MemoryImageSource; import hypermedia.video.OpenCV; @SuppressWarnings("serial") public class FaceDetection extends Frame implements Runnable { ///Main method. public static void main(String[] args) { //System.out.println( "\nOpenCV face detection sample\n" ); new FaceDetection(); } // program execution frame rate (millisecond) final int FRAME_RATE = 1000/30; OpenCV cv = null; // OpenCV Object Thread t = null; // the sample thread // the input video stream image Image frame = null; // list of all face detected area Rectangle[] squares = new Rectangle[0]; //** Setup Frame and Object(s). FaceDetection() { super( "Face Detection" ); // OpenCV setup cv = new OpenCV(); //cv.capture(1, 1, 100); cv.capture( 320, 240 ); cv.cascade( OpenCV.CASCADE_FRONTALFACE_ALT ); // frame setup this.setBounds( 100, 100, cv.width, cv.height ); this.setBackground( Color.BLACK ); this.setVisible( true ); this.addKeyListener( new KeyAdapter() { public void keyReleased( KeyEvent e ) { if ( e.getKeyCode()==KeyEvent.VK_ESCAPE ) { // ESC : release OpenCV resources cv.dispose(); System.exit(0); } } } ); // start running program t = new Thread( this ); t.start(); } // Draw video frame and each detected faces area. public void paint( Graphics g ) { // draw image g.drawImage( frame, 0, 0, null ); // draw squares g.setColor( Color.RED ); for( Rectangle rect : squares ) g.drawRect( rect.x, rect.y, rect.width, rect.height ); } @SuppressWarnings("static-access") public void run() { while( t!=null && cv!=null ) { try { t.sleep( FRAME_RATE ); // grab image from video stream cv.read(); // create a new image from cv pixels data MemoryImageSource mis = new MemoryImageSource( cv.width, cv.height, cv.pixels(), 0, cv.width ); frame = createImage( mis ); // detect faces squares = cv.detect( 1.2f, 2, OpenCV.HAAR_DO_CANNY_PRUNING, 20, 20 ); // of course, repaint repaint(); } catch( InterruptedException e ) {;} } } } Error while starting capture : device 0

    Read the article

  • WPF Animation FPS vs. CPU usage - Am I expecting too much?

    - by Cory Charlton
    Working on a screen saver for my wife, http://cchearts.codeplex.com/, and while I've been able to improve FPS on lower end machines (switch from Path to StreamGeometry, use DrawingVisual instead of UserControl, etc) the CPU usage still seems very high. Here's some numbers I ran from a few 5 minute sampling periods: ~60FPS 35% average CPU on Core 2 Duo T7500 @ 2.2GHz, 3GB ram, NVIDIA Quadro NVS 140M (128MB), Vista [My dev laptop] ~40FPS 50% average CPU on Pentium D @ 3.4GHz, 1.5GB ram, Standard VGA Graphics Adapter (unknown), 2003 Server [A crappy desktop] I can understand the lower frame rate and higher CPU usage on the crappy desktop but it still seems pretty high and 35% on my dev laptop seems high as well. I'd really like to analyze the application to get more details but I'm having issues there as well so I'm wondering if I'm doing something wrong (never profiled WPF before). WPF Performance Suite: Process Launch Error Unable to attach to process: CCHearts.exe Do you want to kill it? This error message occurs when I click cancel after attempting launch. If I don't click cancel it sits there idle, I guess waiting to attach. Performance Explorer: Could not launch C:\Projects2\CC.Hearts\CC.Hearts\bin\Debug (USEVISUAL)\CCHearts.exe. Previous attempt to profile the application finished unsuccessfully. Please restart the application. Output Window from Performance: Profiling started. Profiling process ID 5360 (CCHearts). Process ID 5360 has exited. Data written to C:\Projects2\CC.Hearts\CCHearts100608.vsp. Profiling finished. PRF0025: No data was collected. Profiling complete. So I'm stuck wanting to improve performance but have no concrete way to determine where the bottleneck is. Have been relatively successful throwing darts at this point but I'm beyond that now :) PS: Screensaver is hosted at CodePlex if you want to look at the source and missed the link above. Edit: My RenderOptions darts... // NOTE: Grasping at straws here ;-) RenderOptions.SetBitmapScalingMode(newHeart, BitmapScalingMode.LowQuality); RenderOptions.SetCachingHint(newHeart, CachingHint.Cache); RenderOptions.SetEdgeMode(newHeart, EdgeMode.Aliased); I threw those a little while back and didn't see much difference (not sure if the bitmap scaling even comes into play). Really wish I could get profiling working to know where I should try to optimize. For now I assume there is some overhead in creating a new HeartVisual and the DrawingVisual contained inside. Maybe if I reset and reused the hearts (tossed them in a queue once they completed or something) I'd see an improvement. Shrug Throwing darts while blindfolder is always fun.

    Read the article

  • How I can add JScroll bar to NavigableImagePanel which is an Image panel with an small navigation vi

    - by Sarah Kho
    Hi, I have the following NavigableImagePanel, it is under BSD license and I found it in the web. What I want to do with this panel is as follow: I want to add a JScrollPane to it in order to show images in their full size and let the users to re-center the image using the small navigation panel. Right now, the panel resize the images to fit them in the current panel size. I want it to load the image in its real size and let users to navigate to different parts of the image using the navigation panel. Source code for the panel: import java.awt.AWTEvent; import java.awt.BorderLayout; import java.awt.Color; import java.awt.Dimension; import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.GraphicsEnvironment; import java.awt.Image; import java.awt.Point; import java.awt.Rectangle; import java.awt.RenderingHints; import java.awt.Toolkit; import java.awt.event.ComponentAdapter; import java.awt.event.ComponentEvent; import java.awt.event.MouseAdapter; import java.awt.event.MouseEvent; import java.awt.event.MouseMotionListener; import java.awt.event.MouseWheelEvent; import java.awt.event.MouseWheelListener; import java.awt.image.BufferedImage; import java.io.File; import java.io.IOException; import java.util.Arrays; import javax.imageio.ImageIO; import javax.swing.JFrame; import javax.swing.JOptionPane; import javax.swing.JPanel; import javax.swing.SwingUtilities; /** * @author pxt * */ public class NavigableImagePanel extends JPanel { /** * <p>Identifies a change to the zoom level.</p> */ public static final String ZOOM_LEVEL_CHANGED_PROPERTY = "zoomLevel"; /** * <p>Identifies a change to the zoom increment.</p> */ public static final String ZOOM_INCREMENT_CHANGED_PROPERTY = "zoomIncrement"; /** * <p>Identifies that the image in the panel has changed.</p> */ public static final String IMAGE_CHANGED_PROPERTY = "image"; private static final double SCREEN_NAV_IMAGE_FACTOR = 0.15; // 15% of panel's width private static final double NAV_IMAGE_FACTOR = 0.3; // 30% of panel's width private static final double HIGH_QUALITY_RENDERING_SCALE_THRESHOLD = 1.0; private static final Object INTERPOLATION_TYPE = RenderingHints.VALUE_INTERPOLATION_BILINEAR; private double zoomIncrement = 0.2; private double zoomFactor = 1.0 + zoomIncrement; private double navZoomFactor = 1.0 + zoomIncrement; private BufferedImage image; private BufferedImage navigationImage; private int navImageWidth; private int navImageHeight; private double initialScale = 0.0; private double scale = 0.0; private double navScale = 0.0; private int originX = 0; private int originY = 0; private Point mousePosition; private Dimension previousPanelSize; private boolean navigationImageEnabled = true; private boolean highQualityRenderingEnabled = true; private WheelZoomDevice wheelZoomDevice = null; private ButtonZoomDevice buttonZoomDevice = null; /** * <p>Defines zoom devices.</p> */ public static class ZoomDevice { /** * <p>Identifies that the panel does not implement zooming, * but the component using the panel does (programmatic zooming method).</p> */ public static final ZoomDevice NONE = new ZoomDevice("none"); /** * <p>Identifies the left and right mouse buttons as the zooming device.</p> */ public static final ZoomDevice MOUSE_BUTTON = new ZoomDevice("mouseButton"); /** * <p>Identifies the mouse scroll wheel as the zooming device.</p> */ public static final ZoomDevice MOUSE_WHEEL = new ZoomDevice("mouseWheel"); private String zoomDevice; private ZoomDevice(String zoomDevice) { this.zoomDevice = zoomDevice; } public String toString() { return zoomDevice; } } //This class is required for high precision image coordinates translation. private class Coords { public double x; public double y; public Coords(double x, double y) { this.x = x; this.y = y; } public int getIntX() { return (int)Math.round(x); } public int getIntY() { return (int)Math.round(y); } public String toString() { return "[Coords: x=" + x + ",y=" + y + "]"; } } private class WheelZoomDevice implements MouseWheelListener { public void mouseWheelMoved(MouseWheelEvent e) { Point p = e.getPoint(); boolean zoomIn = (e.getWheelRotation() < 0); if (isInNavigationImage(p)) { if (zoomIn) { navZoomFactor = 1.0 + zoomIncrement; } else { navZoomFactor = 1.0 - zoomIncrement; } zoomNavigationImage(); } else if (isInImage(p)) { if (zoomIn) { zoomFactor = 1.0 + zoomIncrement; } else { zoomFactor = 1.0 - zoomIncrement; } zoomImage(); } } } private class ButtonZoomDevice extends MouseAdapter { public void mouseClicked(MouseEvent e) { Point p = e.getPoint(); if (SwingUtilities.isRightMouseButton(e)) { if (isInNavigationImage(p)) { navZoomFactor = 1.0 - zoomIncrement; zoomNavigationImage(); } else if (isInImage(p)) { zoomFactor = 1.0 - zoomIncrement; zoomImage(); } } else { if (isInNavigationImage(p)) { navZoomFactor = 1.0 + zoomIncrement; zoomNavigationImage(); } else if (isInImage(p)) { zoomFactor = 1.0 + zoomIncrement; zoomImage(); } } } } /** * <p>Creates a new navigable image panel with no default image and * the mouse scroll wheel as the zooming device.</p> */ public NavigableImagePanel() { setOpaque(false); addComponentListener(new ComponentAdapter() { public void componentResized(ComponentEvent e) { if (scale > 0.0) { if (isFullImageInPanel()) { centerImage(); } else if (isImageEdgeInPanel()) { scaleOrigin(); } if (isNavigationImageEnabled()) { createNavigationImage(); } repaint(); } previousPanelSize = getSize(); } }); addMouseListener(new MouseAdapter() { public void mousePressed(MouseEvent e) { if (SwingUtilities.isLeftMouseButton(e)) { if (isInNavigationImage(e.getPoint())) { Point p = e.getPoint(); displayImageAt(p); } } } public void mouseClicked(MouseEvent e){ if (e.getClickCount() == 2) { resetImage(); } } }); addMouseMotionListener(new MouseMotionListener() { public void mouseDragged(MouseEvent e) { if (SwingUtilities.isLeftMouseButton(e) && !isInNavigationImage(e.getPoint())) { Point p = e.getPoint(); moveImage(p); } } public void mouseMoved(MouseEvent e) { //we need the mouse position so that after zooming //that position of the image is maintained mousePosition = e.getPoint(); } }); setZoomDevice(ZoomDevice.MOUSE_WHEEL); } /** * <p>Creates a new navigable image panel with the specified image * and the mouse scroll wheel as the zooming device.</p> */ public NavigableImagePanel(BufferedImage image) throws IOException { this(); setImage(image); } private void addWheelZoomDevice() { if (wheelZoomDevice == null) { wheelZoomDevice = new WheelZoomDevice(); addMouseWheelListener(wheelZoomDevice); } } private void addButtonZoomDevice() { if (buttonZoomDevice == null) { buttonZoomDevice = new ButtonZoomDevice(); addMouseListener(buttonZoomDevice); } } private void removeWheelZoomDevice() { if (wheelZoomDevice != null) { removeMouseWheelListener(wheelZoomDevice); wheelZoomDevice = null; } } private void removeButtonZoomDevice() { if (buttonZoomDevice != null) { removeMouseListener(buttonZoomDevice); buttonZoomDevice = null; } } /** * <p>Sets a new zoom device.</p> * * @param newZoomDevice specifies the type of a new zoom device. */ public void setZoomDevice(ZoomDevice newZoomDevice) { if (newZoomDevice == ZoomDevice.NONE) { removeWheelZoomDevice(); removeButtonZoomDevice(); } else if (newZoomDevice == ZoomDevice.MOUSE_BUTTON) { removeWheelZoomDevice(); addButtonZoomDevice(); } else if (newZoomDevice == ZoomDevice.MOUSE_WHEEL) { removeButtonZoomDevice(); addWheelZoomDevice(); } } /** * <p>Gets the current zoom device.</p> */ public ZoomDevice getZoomDevice() { if (buttonZoomDevice != null) { return ZoomDevice.MOUSE_BUTTON; } else if (wheelZoomDevice != null) { return ZoomDevice.MOUSE_WHEEL; } else { return ZoomDevice.NONE; } } //Called from paintComponent() when a new image is set. private void initializeParams() { double xScale = (double)getWidth() / image.getWidth(); double yScale = (double)getHeight() / image.getHeight(); initialScale = Math.min(xScale, yScale); scale = initialScale; //An image is initially centered centerImage(); if (isNavigationImageEnabled()) { createNavigationImage(); } } //Centers the current image in the panel. private void centerImage() { originX = (int)(getWidth() - getScreenImageWidth()) / 2; originY = (int)(getHeight() - getScreenImageHeight()) / 2; } //Creates and renders the navigation image in the upper let corner of the panel. private void createNavigationImage() { //We keep the original navigation image larger than initially //displayed to allow for zooming into it without pixellation effect. navImageWidth = (int)(getWidth() * NAV_IMAGE_FACTOR); navImageHeight = navImageWidth * image.getHeight() / image.getWidth(); int scrNavImageWidth = (int)(getWidth() * SCREEN_NAV_IMAGE_FACTOR); int scrNavImageHeight = scrNavImageWidth * image.getHeight() / image.getWidth(); navScale = (double)scrNavImageWidth / navImageWidth; navigationImage = new BufferedImage(navImageWidth, navImageHeight, image.getType()); Graphics g = navigationImage.getGraphics(); g.drawImage(image, 0, 0, navImageWidth, navImageHeight, null); } /** * <p>Sets an image for display in the panel.</p> * * @param image an image to be set in the panel */ public void setImage(BufferedImage image) { BufferedImage oldImage = this.image; this.image = image; //Reset scale so that initializeParameters() is called in paintComponent() //for the new image. scale = 0.0; firePropertyChange(IMAGE_CHANGED_PROPERTY, (Image)oldImage, (Image)image); repaint(); } /** * <p>resets an image to the centre of the panel</p> * */ public void resetImage() { BufferedImage oldImage = this.image; this.image = image; //Reset scale so that initializeParameters() is called in paintComponent() //for the new image. scale = 0.0; firePropertyChange(IMAGE_CHANGED_PROPERTY, (Image)oldImage, (Image)image); repaint(); } /** * <p>Tests whether an image uses the standard RGB color space.</p> */ public static boolean isStandardRGBImage(BufferedImage bImage) { return bImage.getColorModel().getColorSpace().isCS_sRGB(); } //Converts this panel's coordinates into the original image coordinates private Coords panelToImageCoords(Point p) { return new Coords((p.x - originX) / scale, (p.y - originY) / scale); } //Converts the original image coordinates into this panel's coordinates private Coords imageToPanelCoords(Coords p) { return new Coords((p.x * scale) + originX, (p.y * scale) + originY); } //Converts the navigation image coordinates into the zoomed image coordinates private Point navToZoomedImageCoords(Point p) { int x = p.x * getScreenImageWidth() / getScreenNavImageWidth(); int y = p.y * getScreenImageHeight() / getScreenNavImageHeight(); return new Point(x, y); } //The user clicked within the navigation image and this part of the image //is displayed in the panel. //The clicked point of the image is centered in the panel. private void displayImageAt(Point p) { Point scrImagePoint = navToZoomedImageCoords(p); originX = -(scrImagePoint.x - getWidth() / 2); originY = -(scrImagePoint.y - getHeight() / 2); repaint(); } //Tests whether a given point in the panel falls within the image boundaries. private boolean isInImage(Point p) { Coords coords = panelToImageCoords(p); int x = coords.getIntX(); int y = coords.getIntY(); return (x >= 0 && x < image.getWidth() && y >= 0 && y < image.getHeight()); } //Tests whether a given point in the panel falls within the navigation image //boundaries. private boolean isInNavigationImage(Point p) { return (isNavigationImageEnabled() && p.x < getScreenNavImageWidth() && p.y < getScreenNavImageHeight()); } //Used when the image is resized. private boolean isImageEdgeInPanel() { if (previousPanelSize == null) { return false; } return (originX > 0 && originX < previousPanelSize.width || originY > 0 && originY < previousPanelSize.height); } //Tests whether the image is displayed in its entirety in the panel. private boolean isFullImageInPanel() { return (originX >= 0 && (originX + getScreenImageWidth()) < getWidth() && originY >= 0 && (originY + getScreenImageHeight()) < getHeight()); } /** * <p>Indicates whether the high quality rendering feature is enabled.</p> * * @return true if high quality rendering is enabled, false otherwise. */ public boolean isHighQualityRenderingEnabled() { return highQualityRenderingEnabled; } /** * <p>Enables/disables high quality rendering.</p> * * @param enabled enables/disables high quality rendering */ public void setHighQualityRenderingEnabled(boolean enabled) { highQualityRenderingEnabled = enabled; } //High quality rendering kicks in when when a scaled image is larger //than the original image. In other words, //when image decimation stops and interpolation starts. private boolean isHighQualityRendering() { return (highQualityRenderingEnabled && scale > HIGH_QUALITY_RENDERING_SCALE_THRESHOLD); } /** * <p>Indicates whether navigation image is enabled.<p> * * @return true when navigation image is enabled, false otherwise. */ public boolean isNavigationImageEnabled() { return navigationImageEnabled; } /** * <p>Enables/disables navigation with the navigation image.</p> * <p>Navigation image should be disabled when custom, programmatic navigation * is implemented.</p> * * @param enabled true when navigation image is enabled, false otherwise. */ public void setNavigationImageEnabled(boolean enabled) { navigationImageEnabled = enabled; repaint(); } //Used when the panel is resized private void scaleOrigin() { originX = originX * getWidth() / previousPanelSize.width; originY = originY * getHeight() / previousPanelSize.height; repaint(); } //Converts the specified zoom level to scale. private double zoomToScale(double zoom) { return initialScale * zoom; } /** * <p>Gets the current zoom level.</p> * * @return the current zoom level */ public double getZoom() { return scale / initialScale; } /** * <p>Sets the zoom level used to display the image.</p> * <p>This method is used in programmatic zooming. The zooming center is * the point of the image closest to the center of the panel. * After a new zoom level is set the image is repainted.</p> * * @param newZoom the zoom level used to display this panel's image. */ public void setZoom(double newZoom) { Point zoomingCenter = new Point(getWidth() / 2, getHeight() / 2); setZoom(newZoom, zoomingCenter); } /** * <p>Sets the zoom level used to display the image, and the zooming center, * around which zooming is done.</p> * <p>This method is used in programmatic zooming. * After a new zoom level is set the image is repainted.</p> * * @param newZoom the zoom level used to display this panel's image. */ public void setZoom(double newZoom, Point zoomingCenter) { Coords imageP = panelToImageCoords(zoomingCenter); if (imageP.x < 0.0) { imageP.x = 0.0; } if (imageP.y < 0.0) { imageP.y = 0.0; } if (imageP.x >= image.getWidth()) { imageP.x = image.getWidth() - 1.0; } if (imageP.y >= image.getHeight()) { imageP.y = image.getHeight() - 1.0; } Coords correctedP = imageToPanelCoords(imageP); double oldZoom = getZoom(); scale = zoomToScale(newZoom); Coords panelP = imageToPanelCoords(imageP); originX += (correctedP.getIntX() - (int)panelP.x); originY += (correctedP.getIntY() - (int)panelP.y); firePropertyChange(ZOOM_LEVEL_CHANGED_PROPERTY, new Double(oldZoom), new Double(getZoom())); repaint(); } /** * <p>Gets the current zoom increment.</p> * * @return the current zoom increment */ public double getZoomIncrement() { return zoomIncrement; } /** * <p>Sets a new zoom increment value.</p> * * @param newZoomIncrement new zoom increment value */ public void setZoomIncrement(double newZoomIncrement) { double oldZoomIncrement = zoomIncrement; zoomIncrement = newZoomIncrement; firePropertyChange(ZOOM_INCREMENT_CHANGED_PROPERTY, new Double(oldZoomIncrement), new Double(zoomIncrement)); } //Zooms an image in the panel by repainting it at the new zoom level. //The current mouse position is the zooming center. private void zoomImage() { Coords imageP = panelToImageCoords(mousePosition); double oldZoom = getZoom(); scale *= zoomFactor; Coords panelP = imageToPanelCoords(imageP); originX += (mousePosition.x - (int)panelP.x); originY += (mousePosition.y - (int)panelP.y); firePropertyChange(ZOOM_LEVEL_CHANGED_PROPERTY, new Double(oldZoom), new Double(getZoom())); repaint(); } //Zooms the navigation image private void zoomNavigationImage() { navScale *= navZoomFactor; repaint(); } /** * <p>Gets the image origin.</p> * <p>Image origin is defined as the upper, left corner of the image in * the panel's coordinate system.</p> * @return the point of the upper, left corner of the image in the panel's coordinates * system. */ public Point getImageOrigin() { return new Point(originX, originY); } /** * <p>Sets the image origin.</p> * <p>Image origin is defined as the upper, left corner of the image in * the panel's coordinate system. After a new origin is set, the image is repainted. * This method is used for programmatic image navigation.</p>

    Read the article

  • Cannot run Android "Camera Preview" sample

    - by noisesolo
    The sample I'm referring to is: CameraPreview. The program simply force closes upon start up. I've also tried other camera demos that have the same problem. I'm trying to run the samples on my Nexus One and the emulator with the same problem on both. I'm not even sure if the emulator should be able to run them or not. Based on LogCat, the error is: 06-08 16:39:10.483: ERROR/AndroidRuntime(6726): Uncaught handler: thread main exiting due to uncaught exception 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): java.lang.RuntimeException: Fail to connect to camera service 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.hardware.Camera.native_setup(Native Method) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.hardware.Camera.<init>(Camera.java:110) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.hardware.Camera.open(Camera.java:90) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at com.example.android.apis.graphics.Preview.surfaceCreated(CameraPreview.java:69) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.view.SurfaceView.updateWindow(SurfaceView.java:454) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.view.SurfaceView.dispatchDraw(SurfaceView.java:287) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.view.ViewGroup.drawChild(ViewGroup.java:1529) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.view.ViewGroup.dispatchDraw(ViewGroup.java:1258) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.view.View.draw(View.java:6557) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.widget.FrameLayout.draw(FrameLayout.java:352) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.view.ViewGroup.drawChild(ViewGroup.java:1531) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.view.ViewGroup.dispatchDraw(ViewGroup.java:1258) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.view.View.draw(View.java:6557) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.widget.FrameLayout.draw(FrameLayout.java:352) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at com.android.internal.policy.impl.PhoneWindow$DecorView.draw(PhoneWindow.java:1830) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.view.ViewRoot.draw(ViewRoot.java:1349) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.view.ViewRoot.performTraversals(ViewRoot.java:1114) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.view.ViewRoot.handleMessage(ViewRoot.java:1633) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.os.Handler.dispatchMessage(Handler.java:99) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.os.Looper.loop(Looper.java:123) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at android.app.ActivityThread.main(ActivityThread.java:4363) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at java.lang.reflect.Method.invokeNative(Native Method) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at java.lang.reflect.Method.invoke(Method.java:521) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:860) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:618) 06-08 16:39:10.494: ERROR/AndroidRuntime(6726): at dalvik.system.NativeStart.main(Native Method) All I did to try out the sample was create a new Android 2.1update1 Project, named everything according to the supplied Java file, copied the Java file from the URL to the CameraPreview.java file, then run it. Am I supposed to do anything else? Any help would be appreciated. Thanks in advance.

    Read the article

  • 403 error after adding javascript to masterpage for sharepoint.

    - by Jeremy
    I am attempting to add highslide-with-html.js from http://highslide.com/ to my masterpage. I am receiving a 403 forbidden error when I use the provided masterpage. I have placed it in C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\LAYOUTS\1033. Test javascript files such as pirate.js which consists solely of alert("Arr!"); have loaded from the same directory. I have provided the code for the masterpage. When I do not reference the problem javascript file there is no 403 error. <%@ Master language="C#" %> <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <%@ Import Namespace="Microsoft.SharePoint" %> <%@ Register Tagprefix="SPSWC" Namespace="Microsoft.SharePoint.Portal.WebControls" Assembly="Microsoft.SharePoint.Portal, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %> <%@ Register Tagprefix="SharePoint" Namespace="Microsoft.SharePoint.WebControls" Assembly="Microsoft.SharePoint, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %> <%@ Register Tagprefix="WebPartPages" Namespace="Microsoft.SharePoint.WebPartPages" Assembly="Microsoft.SharePoint, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %> <%@ Register Tagprefix="PublishingWebControls" Namespace="Microsoft.SharePoint.Publishing.WebControls" Assembly="Microsoft.SharePoint.Publishing, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %> <%@ Register Tagprefix="PublishingNavigation" Namespace="Microsoft.SharePoint.Publishing.Navigation" Assembly="Microsoft.SharePoint.Publishing, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %> <%@ Register TagPrefix="wssuc" TagName="Welcome" src="~/_controltemplates/Welcome.ascx" %> <%@ Register TagPrefix="wssuc" TagName="DesignModeConsole" src="~/_controltemplates/DesignModeConsole.ascx" %> <%@ Register TagPrefix="PublishingVariations" TagName="VariationsLabelMenu" src="~/_controltemplates/VariationsLabelMenu.ascx" %> <%@ Register Tagprefix="PublishingConsole" TagName="Console" src="~/_controltemplates/PublishingConsole.ascx" %> <%@ Register TagPrefix="PublishingSiteAction" TagName="SiteActionMenu" src="~/_controltemplates/PublishingActionMenu.ascx" %> <html dir="<%$Resources:wss, multipages_direction_dir_value %>" runat="server" __expr-val-dir="ltr"> <head runat="server"> <meta name="GENERATOR" content="Microsoft SharePoint"> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"> <meta http-equiv="Expires" content="0"> <SharePoint:RobotsMetaTag runat="server" __designer:Preview="" __designer:Values="&lt;P N='InDesign' T='False' /&gt;&lt;P N='ID' T='ctl00' /&gt;&lt;P N='Page' ID='1' /&gt;&lt;P N='TemplateControl' ID='2' /&gt;&lt;P N='AppRelativeTemplateSourceDirectory' R='-1' /&gt;"/> <title id="onetidTitle"> <asp:ContentPlaceHolder id="PlaceHolderPageTitle" runat="server"/> </title> <Sharepoint:CssLink runat="server" __designer:Preview="&lt;link rel=&quot;stylesheet&quot; type=&quot;text/css&quot; href=&quot;/Style%20Library/en-US/Core%20Styles/Band.css&quot;/&gt; &lt;link rel=&quot;stylesheet&quot; type=&quot;text/css&quot; href=&quot;/Style%20Library/en-US/Core%20Styles/controls.css&quot;/&gt; &lt;link rel=&quot;stylesheet&quot; type=&quot;text/css&quot; href=&quot;/Style%20Library/zz1_blue.css&quot;/&gt; &lt;link rel=&quot;stylesheet&quot; type=&quot;text/css&quot; href=&quot;/_layouts/1033/styles/core.css&quot;/&gt; " __designer:Values="&lt;P N='InDesign' T='False' /&gt;&lt;P N='ID' T='ctl01' /&gt;&lt;P N='Page' ID='1' /&gt;&lt;P N='TemplateControl' ID='2' /&gt;&lt;P N='AppRelativeTemplateSourceDirectory' R='-1' /&gt;"/> <!--Styles used for positioning, font and spacing definitions--> <SharePoint:CssRegistration name="<% $SPUrl:~SiteCollection/Style Library/~language/Core Styles/Band.css%>" runat="server" __designer:Preview="&lt;link rel=&quot;stylesheet&quot; type=&quot;text/css&quot; href=&quot;/Style%20Library/en-US/Core%20Styles/Band.css&quot;/&gt; " __designer:Values="&lt;P N='Name' Bound='True' T='SPUrl:~SiteCollection/Style Library/~language/Core Styles/Band.css' /&gt;&lt;P N='InDesign' T='False' /&gt;&lt;P N='ID' T='ctl02' /&gt;&lt;P N='Page' ID='1' /&gt;&lt;P N='TemplateControl' ID='2' /&gt;&lt;P N='AppRelativeTemplateSourceDirectory' R='-1' /&gt;"/> <SharePoint:CssRegistration name="<% $SPUrl:~sitecollection/Style Library/~language/Core Styles/controls.css %>" runat="server" __designer:Preview="&lt;link rel=&quot;stylesheet&quot; type=&quot;text/css&quot; href=&quot;/Style%20Library/en-US/Core%20Styles/controls.css&quot;/&gt; " __designer:Values="&lt;P N='Name' Bound='True' T='SPUrl:~sitecollection/Style Library/~language/Core Styles/controls.css' /&gt;&lt;P N='InDesign' T='False' /&gt;&lt;P N='ID' T='ctl03' /&gt;&lt;P N='Page' ID='1' /&gt;&lt;P N='TemplateControl' ID='2' /&gt;&lt;P N='AppRelativeTemplateSourceDirectory' R='-1' /&gt;"/> <SharePoint:CssRegistration name="<% $SPUrl:~SiteCollection/Style Library/zz1_blue.css%>" runat="server" __designer:Preview="&lt;link rel=&quot;stylesheet&quot; type=&quot;text/css&quot; href=&quot;/Style%20Library/zz1_blue.css&quot;/&gt; " __designer:Values="&lt;P N='Name' Bound='True' T='SPUrl:~SiteCollection/Style Library/zz1_blue.css' /&gt;&lt;P N='InDesign' T='False' /&gt;&lt;P N='ID' T='ctl04' /&gt;&lt;P N='Page' ID='1' /&gt;&lt;P N='TemplateControl' ID='2' /&gt;&lt;P N='AppRelativeTemplateSourceDirectory' R='-1' /&gt;"/> <SharePoint:ScriptLink name="init.js" runat="server" __designer:Preview="&lt;script src=&quot;/_layouts/1033/init.js?rev=VhAxGc3rkK79RM90tibDzw%3D%3D&quot;&gt;&lt;/script&gt; " __designer:Values="&lt;P N='Name' T='init.js' /&gt;&lt;P N='InDesign' T='False' /&gt;&lt;P N='ID' T='ctl05' /&gt;&lt;P N='Page' ID='1' /&gt;&lt;P N='TemplateControl' ID='2' /&gt;&lt;P N='AppRelativeTemplateSourceDirectory' R='-1' /&gt;"/> <SharePoint:ScriptLink Name="highslide-with-html.js" runat="server" __designer:Error="Access to the path 'C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\Template\layouts\1033\highslide-with-html.js' is denied."/> <!--Placeholder for additional overrides--> <asp:ContentPlaceHolder id="PlaceHolderAdditionalPageHead" runat="server"/> </head> <body class="body" onload="javascript:_spBodyOnLoadWrapper();"> <WebPartPages:SPWebPartManager runat="server"/> <form runat="server" onsubmit="return _spFormOnSubmitWrapper();"> <table cellpadding="0" cellspacing="0" class="master"> <tr> <td height="100%" class="shadowLeft"> <div class="spacer"> </div> </td> <td valign="top"> <table cellpadding="0" cellspacing="0" width="100%" class="masterContent"> <tr style="height:0px"><td> <wssuc:DesignModeConsole id="IdDesignModeConsole" runat="server" __designer:Preview="&lt;span __designer:NonVisual=&quot;true&quot;&gt;[ DesignModeConsoleContainer &quot;DesignModeContainer&quot; ]&lt;/span&gt; " __designer:Values="&lt;P N='ID' ID='1' T='IdDesignModeConsole' /&gt;&lt;P N='TemplateControl' R='0' /&gt;"/></td></tr> <tr> <td colspan="2" class="authoringRegion"> <span class="siteActionMenu"> <PublishingSiteAction:SiteActionMenu runat="server" __designer:Preview=" &lt;!-- Begin Action Menu Markup --&gt; &lt;table height=100% class=&quot;ms-siteaction&quot; cellpadding=0 cellspacing=0&gt; &lt;tr&gt; &lt;td class=&quot;ms-siteactionsmenu&quot; id=&quot;siteactiontd&quot;&gt; &lt;span style=&quot;display:none&quot;&gt;&lt;menu type='ServerMenu' id=&quot;zz1_SiteActionsMenuMain&quot; largeIconMode=&quot;true&quot;&gt;&lt;ie:menuitem id=&quot;zz2_MenuItem_Create&quot; type=&quot;option&quot; iconSrc=&quot;/_layouts/images/Actionscreate.gif&quot; onMenuClick=&quot;window.location = '/_layouts/create.aspx';&quot; menuGroupId=&quot;100&quot;&gt;&lt;/ie:menuitem&gt;&lt;ie:menuitem id=&quot;zz3_MenuItem_Settings&quot; type=&quot;option&quot; iconSrc=&quot;/_layouts/images/ActionsSettings.gif&quot; onMenuClick=&quot;window.location = '/_layouts/settings.aspx';&quot; menuGroupId=&quot;100&quot;&gt;&lt;/ie:menuitem&gt;&lt;/menu&gt;&lt;/span&gt;&lt;div&gt;&lt;div&gt;&lt;span title=&quot;Open Menu&quot;&gt;&lt;div id=&quot;zz4_SiteActionsMenu_t&quot; class=&quot;&quot; onmouseover=&quot;MMU_PopMenuIfShowing(this);MMU_EcbTableMouseOverOut(this, true)&quot; hoverActive=&quot;ms-siteactionsmenuhover&quot; hoverInactive=&quot;&quot; onclick=&quot; MMU_Open(byid(''), MMU_GetMenuFromClientId('zz4_SiteActionsMenu'),event,false, null, 0);&quot; foa=&quot;MMU_GetMenuFromClientId('zz4_SiteActionsMenu')&quot; oncontextmenu=&quot;this.click(); return false;&quot; nowrap=&quot;nowrap&quot;&gt;&lt;a id=&quot;zz4_SiteActionsMenu&quot; accesskey=&quot;/&quot; href=&quot;#&quot; onclick=&quot;javascript:return false;&quot; style=&quot;cursor:pointer;white-space:nowrap;&quot; onfocus=&quot;MMU_EcbLinkOnFocusBlur(byid(''), this, true);&quot; onkeydown=&quot;MMU_EcbLinkOnKeyDown(byid(''), MMU_GetMenuFromClientId('zz4_SiteActionsMenu'), event);&quot; onclick=&quot; MMU_Open(byid(''), MMU_GetMenuFromClientId('zz4_SiteActionsMenu'),event,false, null, 0);&quot; oncontextmenu=&quot;this.click(); return false;&quot; menuTokenValues=&quot;MENUCLIENTID=zz4_SiteActionsMenu,TEMPLATECLIENTID=zz1_SiteActionsMenuMain&quot; serverclientid=&quot;zz4_SiteActionsMenu&quot;&gt;Site Actions&lt;img src=&quot;/_layouts/images/blank.gif&quot; border=&quot;0&quot; alt=&quot;Use SHIFT+ENTER to open the menu (new window).&quot;/&gt;&lt;/a&gt;&lt;img align=&quot;absbottom&quot; src=&quot;/_layouts/images/whitearrow.gif&quot; alt=&quot;&quot; /&gt;&lt;/div&gt;&lt;/span&gt;&lt;/div&gt;&lt;/div&gt; &lt;/td&gt; &lt;/tr&gt; &lt;/table&gt; &lt;!-- End Action Menu Markup --&gt; " __designer:Values="&lt;P N='TemplateControl' R='0' /&gt;"/> </span> <div class="sharepointLogin"> <!--Authentication for Authors only--> <table cellpadding="0" cellspacing="0" > <tr> <td class="ms-globallinks"> <SharePoint:DelegateControl ControlId="GlobalSiteLink1" Scope="Farm" runat="server" __designer:Preview="&lt;span style='padding-left:3px'&gt;&lt;/span&gt; &lt;a id=&quot;ctl00_ctl09_hlMySite&quot; href=&quot;http://litwaredemo:80/MySite/_layouts/MySite.aspx&quot;&gt;My Site&lt;/a&gt; &lt;span style='padding-left:4px;padding-right:3px'&gt;|&lt;/span&gt; " __designer:Values="&lt;P N='ControlId' T='GlobalSiteLink1' /&gt;&lt;P N='Scope' T='Farm' /&gt;&lt;P N='ID' T='ctl08' /&gt;&lt;P N='Page' ID='1' /&gt;&lt;P N='TemplateControl' ID='2' /&gt;&lt;P N='AppRelativeTemplateSourceDirectory' R='-1' /&gt;"/></td> <td class="ms-globallinks"> <SharePoint:DelegateControl ControlId="GlobalSiteLink2" Scope="Farm" runat="server" __designer:Preview="&lt;span id=&quot;ctl00_ctl11_MyLinksMenu&quot;&gt;&lt;span style=&quot;display:none&quot;&gt;&lt;menu type='ServerMenu' id=&quot;ctl00_ctl11_MyLinksMenuMenuTemplate&quot; largeIconMode=&quot;true&quot;&gt;&lt;/menu&gt;&lt;/span&gt;&lt;span title=&quot;Open Menu&quot;&gt;&lt;span id=&quot;ctl00_ctl11_MyLinksMenuMenu_t&quot; class=&quot;ms-SPLink ms-hovercellinactive&quot; onmouseover=&quot;MMU_PopMenuIfShowing(this);MMU_EcbTableMouseOverOut(this, true)&quot; hoverActive=&quot;ms-SPLink ms-hovercellactive&quot; hoverInactive=&quot;ms-SPLink ms-hovercellinactive&quot; onclick=&quot;javascript:FetchCallbackMenuItems(&amp;#39;ctl00_ctl11_MyLinksMenuMenuTemplate&amp;#39;); MMU_Open(byid('ctl00_ctl11_MyLinksMenuMenuTemplate'), MMU_GetMenuFromClientId('ctl00_ctl11_MyLinksMenuMenu'),event,true, null, 0);&quot; foa=&quot;MMU_GetMenuFromClientId('ctl00_ctl11_MyLinksMenuMenu')&quot; oncontextmenu=&quot;this.click(); return false;&quot; nowrap=&quot;nowrap&quot;&gt;&lt;a id=&quot;ctl00_ctl11_MyLinksMenuMenu&quot; accesskey=&quot;M&quot; href=&quot;#&quot; onclick=&quot;javascript:return false;&quot; style=&quot;cursor:pointer;white-space:nowrap;&quot; onfocus=&quot;MMU_EcbLinkOnFocusBlur(byid('ctl00_ctl11_MyLinksMenuMenuTemplate'), this, true);&quot; onkeydown=&quot;MMU_EcbLinkOnKeyDown(byid('ctl00_ctl11_MyLinksMenuMenuTemplate'), MMU_GetMenuFromClientId('ctl00_ctl11_MyLinksMenuMenu'), event);&quot; onclick=&quot;javascript:FetchCallbackMenuItems(&amp;#39;ctl00_ctl11_MyLinksMenuMenuTemplate&amp;#39;); MMU_Open(byid('ctl00_ctl11_MyLinksMenuMenuTemplate'), MMU_GetMenuFromClientId('ctl00_ctl11_MyLinksMenuMenu'),event,true, null, 0);&quot; oncontextmenu=&quot;this.click(); return false;&quot; menuTokenValues=&quot;MENUCLIENTID=ctl00_ctl11_MyLinksMenuMenu,TEMPLATECLIENTID=ctl00_ctl11_MyLinksMenuMenuTemplate&quot; serverclientid=&quot;ctl00_ctl11_MyLinksMenuMenu&quot;&gt;My Links&lt;img src=&quot;/_layouts/images/blank.gif&quot; border=&quot;0&quot; alt=&quot;Use SHIFT+ENTER to open the menu (new window).&quot;/&gt;&lt;/a&gt;&lt;img align=&quot;absbottom&quot; src=&quot;/_layouts/images/menudark.gif&quot; alt=&quot;&quot; /&gt;&lt;/span&gt;&lt;/span&gt;&lt;/span&gt;|" __designer:Values="&lt;P N='ControlId' T='GlobalSiteLink2' /&gt;&lt;P N='Scope' T='Farm' /&gt;&lt;P N='ID' T='ctl10' /&gt;&lt;P N='Page' ID='1' /&gt;&lt;P N='TemplateControl' ID='2' /&gt;&lt;P N='AppRelativeTemplateSourceDirectory' R='-1' /&gt;"/></td> <td class="ms-globallinks"> <wssuc:Welcome id="explitLogout" runat="server" __designer:Preview=" &lt;span style=&quot;display:none&quot;&gt;&lt;menu type='ServerMenu' id=&quot;zz5_ID_PersonalActionMenu&quot; largeIconMode=&quot;true&quot;&gt;&lt;ie:menuitem id=&quot;zz6_ID_PersonalInformation&quot; type=&quot;option&quot; iconSrc=&quot;/_layouts/images/menuprofile.gif&quot; onMenuClick=&quot;javascript:GoToPage('\u002f_layouts\u002fuserdisp.aspx?Force=True\u0026ID=' + _spUserId);return false;&quot; menuGroupId=&quot;100&quot;&gt;&lt;/ie:menuitem&gt;&lt;ie:menuitem id=&quot;zz7_ID_LoginAsDifferentUser&quot; type=&quot;option&quot; onMenuClick=&quot;javascript:LoginAsAnother('\u002f_layouts\u002fAccessDenied.aspx?loginasanotheruser=true', 0)&quot; menuGroupId=&quot;200&quot;&gt;&lt;/ie:menuitem&gt;&lt;ie:menuitem id=&quot;zz8_ID_RequestAccess&quot; type=&quot;option&quot; onMenuClick=&quot;window.location = '/_layouts/reqacc.aspx?type=list&amp;amp;name=%7B36F0105B%2D0F8E%2D4A22%2DBE90%2D716A51E97B5D%7D';&quot; menuGroupId=&quot;200&quot;&gt;&lt;/ie:menuitem&gt;&lt;ie:menuitem id=&quot;zz9_ID_Logout&quot; type=&quot;option&quot; onMenuClick=&quot;window.location = '/_layouts/SignOut.aspx';&quot; menuGroupId=&quot;200&quot;&gt;&lt;/ie:menuitem&gt;&lt;/menu&gt;&lt;/span&gt;&lt;span title=&quot;Open Menu&quot;&gt;&lt;div id=&quot;zz10_Menu_t&quot; class=&quot;ms-SPLink ms-SpLinkButtonInActive&quot; onmouseover=&quot;MMU_PopMenuIfShowing(this);MMU_EcbTableMouseOverOut(this, true)&quot; hoverActive=&quot;ms-SPLink ms-SpLinkButtonActive&quot; hoverInactive=&quot;ms-SPLink ms-SpLinkButtonInActive&quot; onclick=&quot; MMU_Open(byid(''), MMU_GetMenuFromClientId('zz10_Menu'),event,false, null, 0);&quot; foa=&quot;MMU_GetMenuFromClientId('zz10_Menu')&quot; oncontextmenu=&quot;this.click(); return false;&quot; nowrap=&quot;nowrap&quot;&gt;&lt;a id=&quot;zz10_Menu&quot; accesskey=&quot;L&quot; href=&quot;#&quot; onclick=&quot;javascript:return false;&quot; style=&quot;cursor:pointer;white-space:nowrap;&quot; onfocus=&quot;MMU_EcbLinkOnFocusBlur(byid(''), this, true);&quot; onkeydown=&quot;MMU_EcbLinkOnKeyDown(byid(''), MMU_GetMenuFromClientId('zz10_Menu'), event);&quot; onclick=&quot; MMU_Open(byid(''), MMU_GetMenuFromClientId('zz10_Menu'),event,false, null, 0);&quot; oncontextmenu=&quot;this.click(); return false;&quot; menuTokenValues=&quot;MENUCLIENTID=zz10_Menu,TEMPLATECLIENTID=zz5_ID_PersonalActionMenu&quot; serverclientid=&quot;zz10_Menu&quot;&gt;Welcome LitwareInc Administrator&lt;img src=&quot;/_layouts/images/blank.gif&quot; border=&quot;0&quot; alt=&quot;Use SHIFT+ENTER to open the menu (new window).&quot;/&gt;&lt;/a&gt;&lt;img align=&quot;absbottom&quot; src=&quot;/_layouts/images/menudark.gif&quot; alt=&quot;&quot; /&gt;&lt;/div&gt;&lt;/span&gt;&lt;script type=&quot;text/javascript&quot; language=&quot;javascript&quot;&gt;var _spUserId=1;&lt;/script&gt; &lt;a id=&quot;explitLogout_ExplicitLogin&quot; Href=&quot;_controltemplates/http://litwaredemo/_layouts/Authenticate.aspx&quot; style=&quot;display:none&quot;&gt;Sign In&lt;/a&gt; " __designer:Values="&lt;P N='ID' ID='1' T='explitLogout' /&gt;&lt;P N='TemplateControl' R='0' /&gt;"/></td> </tr> </table> </div> <div class="console"> <PublishingConsole:Console runat="server" __designer:Preview=" &lt;!-- Console --&gt; &lt;span id=&quot;ctl00_publishingContext1&quot;&gt;&lt;/span&gt; &lt;script type=&quot;text/javascript&quot; language=&quot;javascript&quot;&gt;if (document.getElementById('mpdmconsole')) { ShowConsoleBlockPaddingWithOverhang('mpLeftBackPadding', 'mpRightBackPadding', 'masterPageLeftOverhang', 'masterPageRightOverhang'); } &lt;/script&gt; &lt;!-- Console --&gt; " __designer:Values="&lt;P N='TemplateControl' R='0' /&gt;"/> </div> </td> </tr> <tr> <td colspan="2" > <table cellpadding="0" cellspacing="0" width="100%"> <tr> <td colspan="4" class="topArea"> <SharePoint:AspMenu ID="logoLinkId" runat="server" DataSourceID="SiteMapDataSourceRoot" StaticDisplayLevels="1" MaximumDynamicDisplayLevels="0" AccessKey="1" CssClass="logo" __designer:Preview="&lt;table id=&quot;zz12_logoLinkId&quot; class=&quot;logo&quot; cellpadding=&quot;0&quot; cellspacing=&quot;0&quot; border=&quot;0&quot;&gt; &lt;tr id=&quot;zz12_logoLinkIdn0&quot;&gt; &lt;td&gt;&lt;table cellpadding=&quot;0&quot; cellspacing=&quot;0&quot; border=&quot;0&quot; width=&quot;100%&quot;&gt; &lt;tr&gt; &lt;td style=&quot;white-space:nowrap;width:100%;&quot;&gt;&lt;a Href=&quot;/Pages/Default.aspx&quot; accesskey=&quot;1&quot; style=&quot;text-decoration:none;&quot;&gt;Home&lt;/a&gt;&lt;/td&gt; &lt;/tr&gt; &lt;/table&gt;&lt;/td&gt; &lt;/tr&gt; &lt;/table&gt;" __designer:Values="&lt;P N='ID' T='logoLinkId' /&gt;&lt;P N='MaximumDynamicDisplayLevels' T='0' /&gt;&lt;P N='DataSourceID' T='SiteMapDataSourceRoot' /&gt;&lt;P N='AccessKey' T='1' /&gt;&lt;P N='ControlStyle'&gt;&lt;P N='CssClass' ID='1' T='logo' /&gt;&lt;P N='Font' ID='2' /&gt;&lt;P N='IsEmpty' T='False' /&gt;&lt;/P&gt;&lt;P N='CssClass' R='1' /&gt;&lt;P N='Font' R='2' /&gt;&lt;P N='Page' ID='3' /&gt;&lt;P N='TemplateControl' ID='4' /&gt;&lt;P N='AppRelativeTemplateSourceDirectory' R='-1' /&gt;" __designer:Templates="&lt;Group Name=&quot;Item Templates&quot;&gt;&lt;Template Name=&quot;StaticItemTemplate&quot; Flags=&quot;D&quot; Content=&quot;&quot; /&gt;&lt;Template Name=&quot;DynamicItemTemplate&quot; Flags=&quot;D&quot; Content=&quot;&quot; /&gt;&lt;/Group&gt;"/> <PublishingNavigation:PortalSiteMapDataSource ID="SiteMapDataSourceRoot" Runat="server" SiteMapProvider="CombinedNavSiteMapProvider" EnableViewState="true" StartFromCurrentNode="true" StartingNodeOffset="0" ShowStartingNode="true" __designer:Preview="&lt;table cellpadding=4 cellspacing=0 style=&quot;font:messagebox;color:buttontext;background-color:buttonface;border: solid 1px;border-top-color:buttonhighlight;border-left-color:buttonhighlight;border-bottom-color:buttonshadow;border-right-color:buttonshadow&quot;&gt; &lt;tr&gt;&lt;td nowrap&gt;&lt;span style=&quot;font-weight:bold&quot;&gt;PortalSiteMapDataSource&lt;/span&gt; - SiteMapDataSourceRoot&lt;/td&gt;&lt;/tr&gt; &lt;tr&gt;&lt;td&gt;&lt;/td&gt;&lt;/tr&gt; &lt;/table&gt;" __designer:Values="&lt;P N='ID' T='SiteMapDataSourceRoot' /&gt;&lt;P N='SiteMapProvider' T='CombinedNavSiteMapProvider' /&gt;&lt;P N='StartFromCurrentNode' T='True' /&gt;&lt;P N='Page' ID='1' /&gt;&lt;P N='TemplateControl' ID='2' /&gt;&lt;P N='AppRelativeTemplateSourceDirectory' R='-1' /&gt;"/> <div class="topLinkBar"> <div class="topLink"> <PublishingVariations:VariationsLabelMenu id="labelmenu1" runat="server" __designer:Preview="&lt;span __designer:NonVisual=&quot;true&quot;&gt;&lt;table cellpadding=4 cellspacing=0 style=&quot;font:messagebox;color:buttontext;background-color:buttonface;border: solid 1px;border-top-color:buttonhighlight;border-left-color:buttonhighlight;border-bottom-color:buttonshadow;border-right-color:buttonshadow&quot;&gt; &lt;tr&gt;&lt;td nowrap&gt;&lt;span style=&quot;font-weight:bold&quot;&gt;VariationDataSource&lt;/span&gt; - LabelMenuDataSource&lt;/td&gt;&lt;/tr&gt; &lt;tr&gt;&lt;td&gt;&lt;/td&gt;&lt;/tr&gt; &lt;/table&gt;&lt;/span&gt; " __designer:Values="&lt;P N='ID' ID='1' T='labelmenu1' /&gt;&lt;P N='TemplateControl' R='0' /&gt;"/> </div> </div> </td> </tr> <tr class="topNavContainer"> <td class="topNavRoundLeft"> <div class="glassSpacerLeft" /> </td> <td valign="top" width="100%"> <SharePoint:AspMenu ID="GlobalNav" Runat="server" DataSourceID="SiteMapDataSource1" Orientation="Horizontal" StaticDisplayLevels="1" MaximumDynamicDisplayLevels="1" StaticSubMenuIndent="0" DynamicHorizontalOffset="0" DynamicVerticalOffset="-8" StaticEnableDefaultPopOutImage="false" ItemWrap="false" SkipLinkText="<%$Resources:cms,masterpages_skiplinktext%>" CssClass="topNav" __designer:Preview="&lt;table id=&quot;zz13_GlobalNav&quot; class=&quot;topNav&quot; cellpadding=&quot;0&quot; cellspacing=&quot;0&quot; border=&quot;0&quot;&gt; &lt;tr&gt; &lt;td title=&quot;Document Center site&quot; id=&quot;zz13_GlobalNavn0&quot;&gt;&lt;table class=&quot;topNavItem&quot; cellpadding=&quot;0&quot; cellspacing=&quot;0&quot; border=&quot;0&quot; width=&quot;100%&quot;&gt; &lt;tr&gt; &lt;td style=&quot;white-space:nowrap;&quot;&gt;&lt;a class=&quot;topNavItem&quot; Href=&quot;/Docs&quot; style=&quot;text-decoration:none;border-style:none;&quot;&gt;Document Center&lt;/a&gt;&lt;/td&gt; &lt;/tr&gt; &lt;/table&gt;&lt;/td&gt;&lt;td style=&quot;width:0px;&quot;&gt;&lt;/td&gt;&lt;td style=&quot;width:0px;&quot;&gt;&lt;/td&gt;&lt;td title=&quot;Company News Home&quot; id=&quot;zz13_GlobalNavn1&quot;&gt;&lt;table class=&quot;topNavItem&quot; cellpadding=&quot;0&quot; cellspacing=&quot;0&quot; border=&quot;0&quot; width=&quot;100%&quot;&gt; &lt;tr&gt; &lt;td style=&quot;white-space:nowrap;&quot;&gt;&lt;a class=&quot;topNavItem&quot; Href=&quot;/News/Pages/Default.aspx&quot; style=&quot;text-decoration:none;border-style:none;&quot;&gt;News&lt;/a&gt;&lt;/td&gt; &lt;/tr&gt; &lt;/table&gt;&lt;/td&gt;&lt;td style=&quot;width:0px;&quot;&gt;&lt;/td&gt;&lt;td style=&quot;width:0px;&quot;&gt;&lt;/td&gt;&lt;td title=&quot;Report Center&quot; id=&quot;zz13_GlobalNavn2&quot;&gt;&lt;table class=&quot;topNavItem&quot; cellpadding=&quot;0&quot; cellspacing=&quot;0&quot; border=&quot;0&quot; width=&quot;100%&quot;&gt; &lt;tr&gt; &lt;td style=&quot;white-space:nowrap;&quot;&gt;&lt;a class=&quot;topNavItem&quot; Href=&quot;/Reports/Pages/Default.aspx&quot; style=&quot;text-decoration:none;border-style:none;&quot;&gt;Reports&lt;/a&gt;&lt;/td&gt; &lt;/tr&gt; &lt;/table&gt;&lt;/td&gt;&lt;td style=&quot;width:0px;&quot;&gt;&lt;/td&gt;&lt;td style=&quot;width:0px;&quot;&gt;&lt;/td&gt;&lt;td title=&quot;The Search Center displays search results&quot; id=&quot;zz13_GlobalNavn3&quot;&gt;&lt;table class=&quot;topNavItem&quot; cellpadding=&quot;0&quot; cellspacing=&quot;0&quot; border=&quot;0&quot; width=&quot;100%&quot;&gt; &lt;tr&gt; &lt;td style=&quot;white-space:nowrap;&quot;&gt;&lt;a class=&quot;topNavItem&quot; Href=&quot;/SearchCenter/Pages/default.aspx&quot; style=&quot;text-decoration:none;border-style:none;&quot;&gt;Search&lt;/a&gt;&lt;/td&gt; &lt;/tr&gt; &lt;/table&gt;&lt;/td&gt;&lt;td style=&quot;width:0px;&quot;&gt;&lt;/td&gt;&lt;td style=&quot;width:0px;&quot;&gt;&lt;/td&gt;&lt;td title=&quot;Site Directory web&quot; id=&quot;zz13_GlobalNavn4&quot;&gt;&lt;table class=&quot;topNavItem&quot; cellpadding=&quot;0&quot; cellspacing=&quot;0&quot; border=&quot;0&quot; width=&quot;100%&quot;&gt; &lt;tr&gt; &lt;td style=&quot;white-space:nowrap;&quot;&gt;&lt;a class=&quot;topNavItem&quot; Href=&quot;/SiteDirectory/Pages/category.aspx&quot; style=&quot;text-decoration:none;border-style:none;&quot;&gt;Sites&lt;/a&gt;&lt;/td&gt; &lt;/tr&gt; &lt;/table&gt;&lt;/td&gt;&lt;td style=&quot;width:0px;&quot;&gt;&lt;/td&gt; &lt;/tr&gt; &lt;/table&gt;" __designer:Values="&lt;P N='ID' T='GlobalNav' /&gt;&lt;P N='DynamicHoverStyle'&gt;&lt;P N='CssClass' T='topNavFlyOutsHover' /&gt;&lt;P N='IsEmpty' T='False' /&gt;&lt;/P&gt;&lt;P N='DynamicMenuItemStyle'&gt;&lt;P N='CssClass' T='topNavFlyOutsItem' /&gt;&lt;P N='IsEmpty' T='False' /&gt;&lt;/P&gt;&lt;P N='DynamicMenuStyle'&gt;&lt;P N='CssClass' T='topNavFlyOuts' /&gt;&lt;P N='IsEmpty' T='False' /&gt;&lt;/P&gt;&lt;P N='DynamicVerticalOffset' T='-8' /&gt;&lt;P N='MaximumDynamicDisplayLevels' T='1' /&gt;&lt;P N='Orientation' E='0' /&gt;&lt;P N='SkipLinkText' Bound='True' T='Resources:cms,masterpages_skiplinktext' /&gt;&lt;P N='StaticEnableDefaultPopOutImage' T='False' /&gt;&lt;P N='StaticHoverStyle'&gt;&lt;P N='CssClass' T='topNavHover' /&gt;&lt;P N='IsEmpty' T='False' /&gt;&lt;/P&gt;&lt;P N='StaticMenuItemStyle'&gt;&lt;P N='CssClass' T='topNavItem' /&gt;&lt;P N='ItemSpacing' T='0px' /&gt;&lt;P N='IsEmpty' T='False' /&gt;&lt;/P&gt;&lt;P N='StaticSelectedStyle'&gt;&lt;P N='CssClass' T='topNavSelected' /&gt;&lt;P N='ItemSpacing' T='0px' /&gt;&lt;P N='IsEmpty' T='False' /&gt;&lt;/P&gt;&lt;P N='StaticSubMenuIndent' T='0px' /&gt;&lt;P N='DataSourceID' T='SiteMapDataSource1' /&gt;&lt;P N='ControlStyle'&gt;&lt;P N='CssClass' ID='1' T='topNav' /&gt;&lt;P N='Font' ID='2' /&gt;&lt;P N='IsEmpty' T='False' /&gt;&lt;/P&gt;&lt;P N='CssClass' R='1' /&gt;&lt;P N='Font' R='2' /&gt;&lt;P N='Page' ID='3' /&gt;&lt;P N='TemplateControl' ID='4' /&gt;&lt;P N='AppRelativeTemplateSourceDirectory' R='-1' /&gt;" __designer:Templates="&lt;Group Name=&quot;Item Templates&quot;&gt;&lt;Template Name=&quot;StaticItemTemplate&quot; Flags=&quot;D&quot; Content=&quot;&quot; /&gt;&lt;Template Name=&quot;DynamicItemTemplate&quot; Flags=&quot;D&quot; Content=&quot;&quot; /&gt;&lt;/Group&gt;"> <StaticMenuItemStyle CssClass="topNavItem" ItemSpacing="0"/> <StaticSelectedStyle CssClass="topNavSelected" ItemSpacing="0"/> <StaticHoverStyle CssClass="topNavHover"/> <DynamicMenuStyle CssClass="topNavFlyOuts" /> <DynamicMenuItemStyle CssClass="topNavFlyOutsItem" /> <DynamicHoverStyle CssClass="topNavFlyOutsHover"/> </SharePoint:AspMenu> <PublishingNavigation:PortalSiteMapDataSource ID="siteMapDataSource1" Runat="server" SiteMapProvider="CombinedNavSiteMapProvider" EnableViewState="true" StartFromCurrentNode="true" StartingNodeOffset="0" ShowStartingNode="false" TreatStartingNodeAsCurrent="true" TrimNonCurrentTypes="Heading" __designer:Preview="&lt;table cellpadding=4 cellspacing=0 style=&quot;font:messagebox;color:buttontext;background-color:buttonface;border: solid 1px;border-top-color:buttonhighlight;border-left-color:buttonhighlight;border-bottom-color:buttonshadow;border-right-color:buttonshadow&quot;&gt; &lt;tr&gt;&lt;td nowrap&gt;&lt;span style=&quot;font-weight:bold&quot;&gt;PortalSiteMapDataSource&lt;/span&gt; - siteMapDataSource1&lt;/td&gt;&lt;/tr&gt; &lt;tr&gt;&lt;td&gt;&lt;/td&gt;&lt;/tr&gt; &lt;/table&gt;" __designer:Values="&lt;P N='ID' T='siteMapDataSource1' /&gt;&lt;P N='SiteMapProvider' T='CombinedNavSiteMapProvider' /&gt;&lt;P N='StartFromCurrentNode' T='True' /&gt;&lt;P N='ShowStartingNode' T='False' /&gt;&lt;P N='TreatStartingNodeAsCurrent' T='True' /&gt;&lt;P N='TrimNonCurrentTypes' E='32' /&gt;&lt;P N='Page' ID='1' /&gt;&lt;P N='TemplateControl' ID='2' /&gt;&lt;P N='AppRelativeTemplateSourceDirectory' R='-1' /&gt;"/> </td> <td> <div class="search"> <asp:ContentPlaceHolder id="PlaceHolderSearchArea" runat="server"> <SPSWC:SearchBoxEx id="SearchBox" RegisterStyles="false" TextBeforeDropDown="" TextBeforeTextBox="<%$Resources:cms,masterpages_searchbox_label%>" TextBoxWidth="100" GoImageUrl="<% $SPUrl:~sitecollection/Style Library/Images/Search_Arrow.jpg %>" GoImageUrlRTL="<% $SPUrl:~sitecollection/Style Library/Images/Search_Arrow_RTL.jpg %>" UseSiteDefaults="true" DropDownMode = "HideScopeDD" SuppressWebPartChrome="true" runat="server" WebPart="true" __WebPartId="{7DECDCCA-FDA0-4739-8F0E-7B8DE48F0E0D}" __Preview="&lt;table TOPLEVEL border=&quot;0&quot; cellpadding=&quot;0&quot; cellspacing=&quot;0&quot; width=&quot;100%&quot;&gt; &lt;tr&gt; &lt;td&gt;&lt;table border=&quot;0&quot; cellpadding=&quot;0&quot; cellspacing=&quot;0&quot; width=&quot;100%&quot;&gt; &lt;tr class=&quot;ms-WPHeader&quot;&gt; &lt;td title=&quot;&quot; id=&quot;WebPart

    Read the article

< Previous Page | 305 306 307 308 309 310 311 312 313 314 315 316  | Next Page >