Search Results

Search found 2774 results on 111 pages for 'adapter'.

Page 31/111 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

  • AR9485 wireless card loses ability to connect after hibernation

    - by DrewDiezel
    This has happened twice now, the first time it happened I just reinstalled Ubuntu. The only things that I've been messing with in terms of networking, have been restarting the network-manager service after I resume from hibernate (because it never works right after resume, but restarting the service fixes that), and changing my mac address with ifconfig wlan0 down && ifconfig wlan0 hw ether 11:22:33:44:55 && ifconfig wlan0 up. using tail | dmesg returns a bunch of attempts to connect, saying something like authenticating ... okay you're connected! now I'm going to just disconnect because I feel like it. (reason=3). Any ideas? If it helps maybe I'll add a picture of the tail|dmesg output later. My wireless drivers are as follows: Atheros AR9485 Wireless Network Adapter Hamachi Network Interface Microsoft Virtual Wifi Miniport Adapter Realtek PCIe GBE Family Controller VirtualBox Host-Only Ethernet Adapter Here is a pastebin of some terminal outputs that could help. Also, the reddit thread has a few answers, for anyone curious. It's located here. It is entirely possible that it's just my school wifi blocking out my laptop, and my home wifi sucks. Wifi does work at places other than my home and school, however my phone can connect to both places. Here is a pastebin of the results of the wireless-info script.

    Read the article

  • DHCP settings out of range Internet shuts off after a few minutes

    - by user263115
    I recently upgraded from windows eight to windows 8.1 I do not know if this has anything to do with anything I have a 64 bit OS. My Internet goes off by itself every 5 minutes even though my wireless icon at the lower right of the screen still shows connected I had an error message in the last event in it said that might DHCP settings were out of range. I get my internet at my house through a wireless portable hotspot through my smart phone. But i haven't ever had any problems before and i only have this problem on this network. If i turn airplane mode on and reset my network card, the internet will come back to life but soon die. i don't experience this problem while on a different network or if i'm on WiFi. This s really annoying please help Windows IP Configuration Host Name . . . . . . . . . . . . : NastyMcnastyJr Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TeamViewer VPN Adapter Physical Address. . . . . . . . . : 00-FF-5D-13-26-21 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter Local Area Connection* 11: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter Physical Address. . . . . . . . . : F6-B7-E2-50-09-38 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter SAMMY McNASTY: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11n Network Adapter Physical Address. . . . . . . . . : F4-B7-E2-50-09-38 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::3107:66bc:cf1f:c776%4(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.43.3(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Friday, November 1, 2013 9:50:20 PM Lease Expires . . . . . . . . . . : Saturday, November 2, 2013 12:56:46 AM Default Gateway . . . . . . . . . : 192.168.43.1 DHCP Server . . . . . . . . . . . : 192.168.43.1 DHCPv6 IAID . . . . . . . . . . . : 83146722 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-F1-98-B4-20-89-84-84-61-BB DNS Servers . . . . . . . . . . . : 192.168.43.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Ethernet: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet Physical Address. . . . . . . . . : 20-89-84-84-61-BB DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Log Name: System Source: Microsoft-Windows-UserPnp Date: 10/26/2013 7:52:23 PM Event ID: 20003 Task Category: (7005) Level: Information Keywords: User: SYSTEM Computer: NastyMcnastyJr Description: Driver Management has concluded the process to add Service vwifibus for Device Instance ID PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 with the following status: 0. Event Xml: 20003 0 4 7005 0 0x8000000000000000 5118 System NastyMcnastyJr vwifibus \SystemRoot\system32\DRIVERS\vwifibus.sys PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 false true 0 Log Name: System Source: Microsoft-Windows-UserPnp Date: 10/19/2013 3:29:12 PM Event ID: 20001 Task Category: (7005) Level: Information Keywords: User: SYSTEM Computer: NastyMcnastyJr Description: Driver Management concluded the process to install driver netbc64.inf_amd64_0df63b5297d0f820\netbc64.inf for Device Instance ID PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 with the following status: 0x0. Event Xml: 20001 0 4 7005 0 0x8000000000000000 2015 System NastyMcnastyJr netbc64.inf_amd64_0df63b5297d0f820\netbc64.inf 6.30.223.102 Microsoft PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 {4D36E972-E325-11CE-BFC1-08002BE10318} false false false 0x0 Broadcom 802.11n Network Adapter Log Name: System Source: Microsoft-Windows-DNS-Client Date: 11/2/2013 12:24:59 AM Event ID: 1014 Task Category: (1014) Level: Warning Keywords: (268435456) User: NETWORK SERVICE Computer: NastyMcnastyJr Description: Name resolution for the name www.google.com timed out after none of the configured DNS servers responded. Event Xml: 1014 0 3 1014 0 0x4000000010000000 34771 System NastyMcnastyJr www.google.com 128 02000000C0A82B01000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

    Read the article

  • DataRelation Insert and ForeignKey

    - by Steve
    Guys, I have a winforms application with two DataGridViews displaying a master-detail relationship from my Person and Address tables. Person table has a PersonID field that is auto-incrementing primary key. Address has a PersonID field that is the FK. I fill my DataTables with DataAdapter and set Person.PersonID column's AutoIncrement=true and AutoIncrementStep=-1. I can insert records in the Person DataTable from the DataGridView. The PersonID column displays unique negative values for PersonID. I update the database by calling DataAdapter.Update(PersonTable) and the negative PersonIDs are converted to positive unique values automatically by SQL Server. Here's the rub. The Address DataGridView show the address table which has a DataRelation to Person by PersonID. Inserted Person records have the temporary negative PersonID. I can now insert records into Address via DataGridView and Address.PersonID is set to the negative value from the DataRelation mapping. I call Adapter.Update(AddressTable) and the negative PersonIDs go into the Address table breaking the relationship. How do you guys handle primary/foreign keys using DataTables and master-detail DataGridViews? Thanks! Steve EDIT: After more googling, I found that SqlDataAdapter.RowUpdated event gives me what I need. I create a new command to query the last id inserted by using @@IDENTITY. It works pretty well. The DataRelation updates the Address.PersonID field for me so it's required to Update the Person table first then update the Address table. All the new records insert properly with correct ids in place! Adapter = new SqlDataAdapter(cmd); Adapter.RowUpdated += (s, e) => { if (e.StatementType != StatementType.Insert) return; //set the id for the inserted record SqlCommand c = e.Command.Connection.CreateCommand(); c.CommandText = "select @@IDENTITY id"; e.Row[0] = Convert.ToInt32( c.ExecuteScalar() ); }; Adapter.Fill(this); SqlCommandBuilder sb = new SqlCommandBuilder(Adapter); sb.GetDeleteCommand(); sb.GetUpdateCommand(); sb.GetInsertCommand(); this.Columns[0].AutoIncrement = true; this.Columns[0].AutoIncrementSeed = -1; this.Columns[0].AutoIncrementStep = -1;

    Read the article

  • multithreading with database

    - by Darsin
    I am looking out for a strategy to utilize multithreading (probably asynchronous delegates) to do a synchronous operation. I am new to multithreading so i will outline my scenario first. This synchronous operation right now is done for one set of data (portfolio) based on the the parameters provided. The (psudeo-code) implementation is given below: public DataSet DoTests(int fundId, DateTime portfolioDate) { // Get test results for the portfolio // Call the database adapter method, which in turn is a stored procedure, // which in turns runs a series of "rule" stored procs and fills a local temp table and returns it back. DataSet resultsDataSet = GetTestResults(fundId, portfolioDate); try { // Do some local processing on the results DoSomeProcessing(resultsDataSet); // Save the results in Test, TestResults and TestAllocations tables in a transaction. // Sets a global transaction which is provided to all the adapter methods called below // It is defined in the Base class StartTransaction("TestTransaction"); // Save Test and get a testId int testId = UpdateTest(resultsDataSet); // Adapter method, uses the same transaction // Update testId in the other tables in the dataset UpdateTestId(resultsDataSet, testId); // Update TestResults UpdateTestResults(resultsDataSet); // Adapter method, uses the same transaction // Update TestAllocations UpdateTestAllocations(resultsDataSet); // Adapter method, uses the same transaction // It is defined in the base class CommitTransaction("TestTransaction"); } catch { RollbackTransaction("TestTransaction"); } return resultsDataSet; } Now the requirement is to do it for multiple set of data. One way would be to call the above DoTests() method in a loop and get the data. I would prefer doing it in parallel. But there are certain catches: StartTransaction() method creates a connection (and transaction) every time it is called. All the underlying database tables, procedures are the same for each call of DoTests(). (obviously). Thus my question are: Will using multithreading anyway improve performance? What are the chances of deadlock especially when new TestId's are being created and the Tests, TestResults and TestAllocations are being saved? How can these deadlocked be handled? Is there any other more efficient way of doing the above operation apart from looping over the DoTests() method repeatedly?

    Read the article

  • Drivers for Atheros AR928X?

    - by Pato7
    I am new in Ubuntu and I had a big trouble with wifi. My ubuntu 12.10 doesn't detect my wifi card and I can't toggle the "activate wireless" option on the tasks bar (it is grey). I searched for drivers to make it work, but nothing worked for me. Can anyone give me a hand? Many thanks in advanced! lspci output 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV710 [Mobility Radeon HD 4500/5100 Series] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series] 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8057 PCI-E Gigabit Ethernet Controller (rev 10) 03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) 0c:03.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 0c:03.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 0c:03.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) lshw -c network output *-network descripción: Ethernet interface producto: 88E8057 PCI-E Gigabit Ethernet Controller fabricante: Marvell Technology Group Ltd. id físico: 0 información del bus: pci@0000:02:00.0 nombre lógico: eth0 versión: 10 serie: 00:24:be:83:b2:4f tamaño: 100Mbit/s capacidad: 1Gbit/s anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuración: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full ip=192.168.1.123 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s recursos: irq:45 memoria:d3520000-d3523fff ioport:c000(size=256) memoria:d3500000-d351ffff *-network DESACTIVADO descripción: Interfaz inalámbrica producto: AR928X Wireless Network Adapter (PCI-Express) fabricante: Atheros Communications Inc. id físico: 0 información del bus: pci@0000:03:00.0 nombre lógico: wlan0 versión: 01 serie: 2c:81:58:e6:b6:03 anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress msix bus_master cap_list ethernet physical wireless configuración: broadcast=yes driver=ath9k driverversion=3.5.0-18-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn recursos: irq:17 memoria:d2100000-d210ffff rfkill list all output 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes 1: sony-wifi: Wireless LAN Soft blocked: yes Hard blocked: no

    Read the article

  • Ubuntu: Failure to login with multiple video adapters

    - by tsilb
    Forgive my ignorance, for I am a complete linux noob. I have a computer with three video cards and six monitors. Works great on Windows. Trying to get it to run Ubuntu as well. It loads fine when I have it configured to run on one adapter; detects both screens, runs ok. But I want to turn the other 4 monitors on and run the whole thing as one extended desktop (one session, etc). So I downloaded and installed the newest ATI driver for Linux, which seems to work, kinda. I ran this to set up the screens: aticonfig --adapter=all --initial -f Now when I boot, Ubuntu seems to turn on all the screens (3 viewports, each with two cloned displays from what I can tell). When I enter my login info OR move the mouse off the main screen, the screens freeze and the kbd/ms become unresponsive. aticonfig generated xorg.conf included below. Have tried the following: aticonfig -initial -f - works, but only detects the primary adapter and 2 screens aticccle - Tells me I have to reboot after enabling the other cards. Then goes into above described freezing state. aticonfig --adapter=all --initial -f - see above Manually editing xorg.conf file with my limited knowledge - Was able to get two adapters running, but only the second adapter initialized while the primary stopped at the Ubuntu boot screen. Was unable to see the login prompt. Froze after I logged in blindly (was able to hear the login sound). Using generic "radeon" driver instead of ATI Proprietary driver with the above init attempts Toggling xinerama Various combinations of the above Hardware: Intel Core 2 Quad q6600 8GB DDR2 (3x) ATI Radeon HD 4680 5 monitors (21W, 21W, 22W Portrait, 22W Portrait, 19")and an HDTV (26"W, HDMI) in a horizontal arrangement I know next to nothing about Linux/Ubuntu aside from basic filesystem navigation, editing text files, and accessing my local and networked Windows stores and shares. Basically this is the most advanced thing I've had to do. I installed today. Please advise how to make this configuration work. my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen "aticonfig-Screen[1]-0" RightOf "aticonfig-Screen[0]-0" Screen "aticonfig-Screen[2]-0" RightOf "aticonfig-Screen[1]-0" Option "RenderAccel" "true" Option "AllowGLXWithComposite" "true" EndSection Section "Files" EndSection Section "Module" EndSection Section "ServerFlags" Option "Xinerama" "0" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[1]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[2]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "aticonfig-Device[1]-0" Driver "fglrx" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "aticonfig-Device[2]-0" Driver "fglrx" BusID "PCI:4:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[1]-0" Device "aticonfig-Device[1]-0" Monitor "aticonfig-Monitor[1]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[2]-0" Device "aticonfig-Device[2]-0" Monitor "aticonfig-Monitor[2]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

    Read the article

  • Static route works on one computer, not the other

    - by Dan
    I have been struggling with this for a couple days now, maybe I just need some people with a fresh perspective to figure out what the issue is. Basically I have a bunch of computers that are being routed through a specific gateway in order to access a web page that is hosted internally on a separate subnet. I set up static routes on all of the computers, and they all work... except one. Here's what a route print -4 looks like for a working computer (Windows 7): =========================================================================== Interface List 14...xx xx xx xx xx xx ......Broadcom 802.11n Network Adapter 11...xx xx xx xx xx xx ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Microsoft 6to4 Adapter 17...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.xxx.xxx.230 10.xxx.xxx.94 20 10.zzz.zzz.0 255.255.255.0 10.xxx.xxx.147 10.xxx.xxx.94 21 10.xxx.xxx.0 255.255.255.0 On-link 10.xxx.xxx.94 276 10.xxx.xxx.94 255.255.255.255 On-link 10.xxx.xxx.94 276 10.xxx.xxx.255 255.255.255.255 On-link 10.xxx.xxx.94 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.xxx.xxx.94 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.xxx.xxx.94 276 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 10.zzz.zzz.0 255.255.255.0 10.xxx.xxx.147 1 =========================================================================== And here's a route print -4 from the station that doesn't work (also Windows 7): =========================================================================== Interface List 10...xx xx xx xx xx xx ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft 6to4 Adapter 14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 16...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.xxx.xxx.230 10.xxx.xxx.132 276 10.zzz.zzz.0 255.255.255.0 10.xxx.xxx.147 10.xxx.xxx.132 21 10.xxx.xxx.0 255.255.255.0 On-link 10.xxx.xxx.132 276 10.xxx.xxx.132 255.255.255.255 On-link 10.xxx.xxx.132 276 10.xxx.xxx.255 255.255.255.255 On-link 10.xxx.xxx.132 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.xxx.xxx.132 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.xxx.xxx.132 276 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 10.zzz.zzz.0 255.255.255.0 10.xxx.xxx.147 1 =========================================================================== Both of these stations are running Windows 7. So essentially what I am trying to do here is route all traffic to the 10.zzz.zzz.0 subnet through the 10.xxx.xxx.147 gateway. Everything else should go through the 10.xxx.xxx.230 gateway. This is the intended behavior, and again it is working everywhere but that one station. I noticed that the Active Route metric costs differ between the two stations, but I am new to the routing table and I am not sure how that is impacting the behavior. I hope I have been able to explain the situation clearly. Any help would be much appreciated. I can provide any additional information if needed!

    Read the article

  • Why is OracleDataAdapter.Fill() Very Slow?

    - by John Gietzen
    I am using a pretty complex query to retrieve some data out of one of our billing databases. I'm running in to an issue where the query seems to complete fairly quickly when executed with SQL Developer, but does not seem to ever finish when using the OracleDataAdapter.Fill() method. I'm only trying to read about 1000 rows, and the query completes in SQL Developer in about 20 seconds. What could be causing such drastic differences in performance? I have tons of other queries that run quickly using the same function. Here is the code I'm using to execute the query: using Oracle.DataAccess.Client; ... public DataTable ExecuteExternalQuery(string connectionString, string providerName, string queryText) { DbConnection connection = null; DbCommand selectCommand = null; DbDataAdapter adapter = null; switch (providerName) { case "System.Data.OracleClient": case "Oracle.DataAccess.Client": connection = new OracleConnection(connectionString); selectCommand = connection.CreateCommand(); adapter = new OracleDataAdapter((OracleCommand)selectCommand); break; ... } DataTable table = null; try { connection.Open(); selectCommand.CommandText = queryText; selectCommand.CommandTimeout = 300000; selectCommand.CommandType = CommandType.Text; table = new DataTable("result"); table.Locale = CultureInfo.CurrentCulture; adapter.Fill(table); } finally { adapter.Dispose(); if (connection.State != ConnectionState.Closed) { connection.Close(); } } return table; } And here is the general outline of the SQL I'm using: with trouble_calls as ( select work_order_number, account_number, date_entered from work_orders where date_entered >= sysdate - (15 + 31) -- Use the index to limit the number of rows scanned and wo_status not in ('Cancelled') and wo_type = 'Trouble Call' ) select account_number, work_order_number, date_entered from trouble_calls wo where wo.icoms_date >= sysdate - 15 and ( select count(*) from trouble_calls repeat where wo.account_number = repeat.account_number and wo.work_order_number <> repeat.work_order_number and wo.date_entered - repeat.date_entered between 0 and 30 ) >= 1

    Read the article

  • Android ListView appears empty, but contains objects

    - by Lethjakman
    I'm having a really odd problem with my android listview. The listview is inside of a fragment, everything's compiling and I'm no longer getting a nullpointer error, but the listview is appearing empty. Even though it's appearing empty, the log is stating that the listview has 385 objects. I can't figure out why it's empty. I do get a blue fragment, and the listview is populated. Any ideas? How I set the adapter: ActivePackages = getList(); LayoutInflater inflater = (LayoutInflater) this.getSystemService(Context.LAYOUT_INFLATER_SERVICE); LinearLayout mContainer = (LinearLayout) inflater.inflate(R.layout.tab_frag1_layout, null); ListView activeList = (ListView) mContainer.findViewById(R.id.activelist); ArrayAdapter<String> adapter = new ArrayAdapter<String>(this, android.R.layout.simple_list_item_1, android.R.id.text1, ActivePackages); Log.i("valueof activeList",String.valueOf(activeList.getCount())); //returns 0 activeList.setAdapter(adapter); adapter.notifyDataSetChanged(); Log.i("valueof activeList",String.valueOf(activeList.getCount())); //returns 385. This is the xml for the fragment: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="match_parent" android:layout_height="match_parent" android:orientation="vertical" > <ListView android:id="@+id/activelist" android:layout_width="match_parent" android:layout_height="match_parent" android:background="#0073fd"> </ListView> </LinearLayout>

    Read the article

  • Zend file upload error

    - by jgnasser
    I am attempting to upload a file using Zend Framework 1.8 and I get some errors. Here is the code snippet: The form element: $element = new Zend_Form_Element_File('doc'); $element->setLabel('Upload an image:') ->setDestination('/path/to/my/upload/folder'); $element->addValidator('Count', false, 1); $element->addValidator('Size', false, 102400); $element->addValidator('Extension', false, 'jpg,png,gif,doc,docx,xls,xlsx,txt'); $this->addElement($element); The code for handling the upload: $adapter = new Zend_File_Transfer_Adapter_Http(); if (!$adapter->receive()) { $messages = $adapter->getMessages(); echo implode("\n", $messages); } This works fine and the file is uploaded but I get the error "The file 'doc' was illegal uploaded, possible attack". I managed to get past this problem by not creating a new Zend_File_Transfer_Adapter_Http() but instead using: $adapter = $form->doc->getTransferAdapter(); With this modification, the first error disappears but now I have an error saying I have provided 2 files instead of one (probably its reading the temp) and when I adjust the validator to accept two files I then get the arror saying "The file 'doc' was not found" and the upload now fails completely. Please help

    Read the article

  • What's the boost way to create a functor that binds out an argument

    - by Mordachai
    I have need for a function pointer that takes two arguments and returns a string. I would like to pass an adapter that wraps a function that takes one argument, and returns the string (i.e. discard one of the arguments). I can trivially build my own adapter, that takes the 2 arguments, calls the wrapped function passing just the one argument through. But I'd much rather have a simple way to create an adapter on the fly, if there is an easy way to do so in C++/boost? Here's some details to make this a bit more concrete: typedef boost::function<CString (int,int)> TooltipTextFn; class MyCtrl { public: MyCtrl(TooltipTextFn callback = boost::bind(&MyCtrl::GetCellText, this, _1, _2)) : m_callback(callback) { } // QUESTION: how to trivially wrapper GetRowText to conform to TooltipTextFn by just discarding _2 ?! void UseRowText() { m_callback = boost::bind(&MyCtrl::GetRowText, this, _1, ??); } private: CString GetCellText(int row, int column); CString GetRowText(int row); TooltipTextFn m_callback; } Obviously, I can supply a member that adapts GetRowText to take two arguments and only passes the first to GetRowText() itself. But is there already a boost binder / adapter that lets me do that?

    Read the article

  • .NET - Is there a way to programmatically fill all tables in a strongly-typed dataset?

    - by Mike Loux
    Hello, all! I have a SQL Server database for which I have created a strongly-typed DataSet (using the DataSet Designer in Visual Studio 2008), so all the adapters and select commands and whatnot were created for me by the wizard. It's a small database with largely static data, so I would like to pull the contents of this DB in its entirety into my application at startup, and then grab individual pieces of data as needed using LINQ. Rather than hard-code each adapter Fill call, I would like to see if there is a way to automate this (possibly via Reflection). So, instead of: Dim _ds As New dsTest dsTestTableAdapters.Table1TableAdapter.Fill(_ds.Table1) dsTestTableAdapters.Table2TableAdapter.Fill(_ds.Table2) <etc etc etc> I would prefer to do something like: Dim _ds As New dsTest For Each tableName As String In _ds.Tables Dim adapter as Object = <routine to grab adapter associated with the table> adapter.Fill(tableName) Next Is that even remotely doable? I have done a fair amount of searching, and I wouldn't think this would be an uncommon request, but I must be either asking the wrong question, or I'm just weird to want to do this. I will admit that I usually prefer to use unbound controls and not go with strongly-typed datasets (I prefer to write SQL directly), but my company wants to go this route, so I'm researching it. I think the idea is that as tables are added, we can just refresh the DataSet using the Designer in Visual Studio and not have to make too many underlying DB code changes. Any help at all would be most appreciated. Thanks in advance!

    Read the article

  • Zend_Auth and database session SaveHandler

    - by takeshin
    I have created Zend_Auth adapter implementing Zend_Auth_Adapter_Interface (similar to Pádraic's adapter) and created simple ACL plugin. Everything works fine with default session handler. So far, so good. As a next step I have created custom Session SaveHandler to persist session data in the database. My implementation is very similar to this one from parables-demo. Seems that everything is working fine. Session data are properly saved to the database, session objects are serialized, but authentication does not work when I enable this custom SaveHandler. I have debugged the authentication and all works fine up till the next request, when the authentication data are lost. I suspected, that is has something to do with the fact, that I use $adapter->write($object) instead $adapter->write($string), but the same happens with strings. I'm bootstrapping Zend_Application_Resource_Session in the first Bootstrap method, as early as possible. Does Zend_Auth need any extra configuration to persist data in the database? Why the authentity is being lost?

    Read the article

  • Zend_Auth and database SaveHandler

    - by takeshin
    I have created Zend_Auth adapter implementing Zend_Auth_Adapter_Interface (similar to Pádraic's adapter) and created simple ACL plugin. Everything works fine with default session handler. So far, so good. As a next step I have created custom Session SaveHandler to persist session data in the database. My implementation is very similar to this one from parables-demo. Seems that everything is working fine. Session data are properly saved to the database, session objects are serialized, but authentication does not work when I enable this custom SaveHandler. I have debugged the authentication and all works fine up till the next request, when the authentication data are lost. I suspected, that is has something to do with the fact, that I use $adapter->write($object) instead $adapter->write($string), but the same happens with strings. I'm bootstrapping Zend_Application_Resource_Session in the first Bootstrap method, as early as possible. Does Zend_Auth need any extra configuration to persist data in the database? Why the authentity is being lost?

    Read the article

  • How do you unit test new code that uses a bunch of classes that cannot be instantiated in a test har

    - by trendl
    I'm writing a messaging layer that should handle communication with a third party API. The API has a bunch of classes that cannot be easily (if at all) instantiated in a test harness. I decided to wrap each class that I need in my unit tests with an adapter/wrapper and expose the members I need through this adapter class. Often I need to expose the wrapped type as well which I do by exposing it as an object. I have also provided an interface for for each or the adapter classes to be able to use them with a mocking framework. This way I can substitute the classes in test for whatever I need. The downside is that I have a bunch of adapter classes that so far server no other reason but testing. For me this is a good reason by itself but others may find this not enough. Possibly, when I write an implementation for another third party vendor's API, I may be able to reuse much of my code and only provide the adapters specific to the vendor's API. However, this is a bit of a long shot and I'm not actually sure it will work. What do you think? Is this approach viable or am I writing unnecessary code that serves no real purpose? Let me say that I do want to write unit tests for my messaging layer and I do now know how to do it otherwise.

    Read the article

  • em1: watchdog timeout -- resetting virtualbox

    - by lightmanhk
    everyone. I try to configure network adapter of my freebsd on virtualbox machine. At first setting up, I got it right. However, after a couple of reboots, my VM gives me a error message: says "em1:Watchdog timeout -- resetting" I tried to google it, and there is no solution that works for me. The following is my network adapter of my VM: Apapter1: NAT Adapter2: Host-only Adapter vboxnet0 On my Virtualbox setting: Host-only networks: Adapter: IPv4 address: 192.168.56.10 IPv4 network mask: 255.255.255.0 On my FreeBSD VM /etc/rc.conf ifconfig_em0="DHCP" ifconfig_em1="inet 192.168.56.11 netmask 255.255.255.0" Moreover, strange thing is that, for example, if timeout error message show at ttyv0 , when I log in at different ttyv[1-9], the error message will not be shown. but in ttyv0, it still gives me the message. And, in term of functionality of em1, it does work. I have no clue about this problem. Hoping any one can give me a solution or suggestion. That will be great! Thanks a lot. Freebsd version: 9.0-RELEASE FreeBSD 9.0-RELEASE i386 Virtual box: 4.1.2 r73507

    Read the article

  • search a listview in Persian

    - by user3641353
    I have listview with textview which I use textview for search items in listview. It works true but just in English. I can not change the keyboard to Persian. Do you have any solution? this is my code: ArrayAdapter<String> adapter; String[] allMovesStr = {"??? ???? ????","?? ???? ????","?? ???? ????? ???????"}; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.all_moves); adapter = new ArrayAdapter<String>(this, android.R.layout.simple_list_item_1, allMovesStr); setListAdapter(adapter); EditText ed = (EditText) findViewById(R.id.inputSearch); ListView lv = (ListView) findViewById(android.R.id.list); lv.setTextFilterEnabled(true); ed.addTextChangedListener(new TextWatcher() { public void onTextChanged(CharSequence arg0, int arg1, int arg2, int arg3) { // TODO Auto-generated method stub } public void beforeTextChanged(CharSequence arg0, int arg1, int arg2, int arg3) { // TODO Auto-generated method stub } public void afterTextChanged(Editable arg0) { // vaghti kar bar harfi vared kard josteju mikone : AllMoves.this.adapter.getFilter().filter(arg0); } }); }

    Read the article

  • ZF2 - ServiceManager injecting into 84 tables... tedious

    - by Dominic Watson
    I originally made another thread about this a couple of months ago in regards to ZF2 injecting into tables with DI during Beta 1 and figured back then that it wasn't really possible. Now ZF2 has been released as version 2.0.0 and ServiceManager is defaulted to instead of DI I guess I have the same question now I'm refactoring. I've got 84 tables that need the DbAdapter injecting into them and I'm sure there has to be a better way as I'm replicating myself SO much. public function getServiceConfig() { return array( 'factories' => array( 'accountTable' => function ($sm) { $dbAdapter = $sm->get('Zend\Db\Adapter\Adapter'); $table = new Model\DbTable\AccountTable($dbAdapter); return $table; }, 'userTable' => function ($sm) { $dbAdapter = $sm->get('Zend\Db\Adapter\Adapter'); $table = new Model\DbTable\UserTable($dbAdapter); return $table; }, // another 82 tables of the above ) ) } With the EventsManager and ServiceManager I have no idea where I stand in getting my application's instances/resources. Thanks, Dom

    Read the article

  • Zend Framework How can I print a logged in user name from a Zend_Session_Namespace

    - by IrishStudent76
    Hi all I have created the following login controller for my site and it works fine in relation to logging users in a logging them out. The thing I want to do is echo the logged in users name into the FlashMessenger for the success page how ever as my code stands I only get the following message when redirected to the success page, "you have been successfully logged in as Array". Can I also ask the following does the line $session-user =$adaptergetResultArray('Password'); create an array of user information less the password value from the database. Many Thanks in advance, IrishStudent76 <?php class LoginController extends Zend_Controller_Action { public function init(){ $this->view->doctype('XHTML1_STRICT'); } // login action public function loginAction() { $form = new PetManager_Form_Login; $this->view->form = $form; /* check for valid input from the form and authenticate using adapter Add user record to session and redirect to the original request URL if present */ if ($this->getRequest()->isPost()) { if ($form->isValid($this->getRequest()->getPost())) { $values = $form->getValues(); $adapter = new PetManager_Auth_Adapter_Doctrine( $values['username'], $values['password'] ); $auth = Zend_Auth::getInstance(); $result = $auth->authenticate($adapter); if ($result->isValid()) { $session = new Zend_Session_Namespace('petmanager.auth'); $session->user = $adapter->getResultArray('Password'); if (isset($session->requestURL)) { $url = $session->requestURL; unset($session->requestURL); $this->_redirect($url); } else { $this->_helper->getHelper('FlashMessenger') ->addMessage('You have been successfully logged in as '.$session- >user); $this->_redirect('/login/success'); } } else { $this->view->message = 'You could not be logged in. Please try again.'; } } } } public function successAction() { if ($this->_helper->getHelper('FlashMessenger')->getMessages()) { $this->view->messages = $this->_helper ->getHelper('FlashMessenger') ->getMessages(); } else { $this->_redirect('/login'); } } public function logoutAction() { Zend_Auth::getInstance()->clearIdentity(); Zend_Session::destroy(); $this->_redirect('/'); } }

    Read the article

  • problem by displaying images stored in a MySQL database?

    - by user1400
    i have images in my blob field in database i use blow colde for displaying image but it does not show any pic , someone could tell me where is my wrong? this is my model: public function getListUser() { $select = $this->select() ->order('lastname DESC'); $adapter = new Zend_Paginator_Adapter_DbTableSelect ($select); return $adapter; } this my controller: $userModel = new Admin_Model_User(); $adapter = $userModel->getListUser(); $paginator = new Zend_Paginator ($adapter); $paginator->setItemCountPerPage(1); $page = $this->_request->getParam('page', 1); $paginator->setCurrentPageNumber($page); $this->view->paginator = $paginator; this my view code: <td style="width: 20%;"> <?php echo $this->lastname ?> </td> <td style="width: 20%;"><?php header("Content-type: image/gif"); print $this->image; ?></td>

    Read the article

  • Why from a virtualized Ubuntu system I can't discover the ip address of my router?

    - by AndreaNobili
    I am not into computer network and I have the following problem finding my router IP address. I have a Windows 8 PC on on which it is installed VmWare Workstation that virtualizes Linux Ubuntu. The network adapter settings of this Virtual Machine is setted as NAT. Now my problem is that if in the Windows 8 DOS shell I perform the ifconfig statment I obtain C:\Users\Andrea>ipconfig Configurazione IP di Windows Scheda Ethernet tap0: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: techub.lan Scheda Ethernet Connessione di rete Bluetooth: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: Scheda LAN wireless Connessione alla rete locale (LAN)* 11: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: Scheda LAN wireless Wi-Fi: Suffisso DNS specifico per connessione: DSL2750B Indirizzo IPv6 locale rispetto al collegamento . : fe80::89ff:6d12:49cf:4354%13 Indirizzo IPv4. . . . . . . . . . . . : 192.168.1.3 Subnet mask . . . . . . . . . . . . . : 255.255.255.0 Gateway predefinito . . . . . . . . . : 192.168.1.1 Scheda Ethernet Ethernet: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: Scheda Ethernet VMware Network Adapter VMnet1: Suffisso DNS specifico per connessione: Indirizzo IPv6 locale rispetto al collegamento . : fe80::edb3:8352:f954:2b0c%23 Indirizzo IPv4. . . . . . . . . . . . : 192.168.129.1 Subnet mask . . . . . . . . . . . . . : 255.255.255.0 Gateway predefinito . . . . . . . . . : Scheda Ethernet VMware Network Adapter VMnet8: Suffisso DNS specifico per connessione: Indirizzo IPv6 locale rispetto al collegamento . : fe80::d00b:8c6e:98b:f1ec%24 Indirizzo IPv4. . . . . . . . . . . . : 192.168.15.1 Subnet mask . . . . . . . . . . . . . : 255.255.255.0 Gateway predefinito . . . . . . . . . : Scheda Tunnel Teredo Tunneling Pseudo-Interface: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: Scheda Tunnel isatap.techub.lan: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: techub.lan Scheda Tunnel isatap.{5B95051D-79AB-4147-92CF-3A2E16698432}: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: Scheda Tunnel isatap.{340A5FAD-1597-402E-B658-29C37E8F7BC2}: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: Scheda Tunnel isatap.DSL2750B: Suffisso DNS specifico per connessione: DSL2750B Indirizzo IPv6 locale rispetto al collegamento . : fe80::5efe:192.168.1.3%26 Gateway predefinito . . . . . . . . . : So, looking at the previous output it appear clear that the default gateway (my router) is: 192.168.1.1, infact if I open it into a browser it apear to me the login mask to enter in the router settings.... Ok, if now I open the virtualized Ubuntu shell and perform the route command I obtain this output: andrea@andrea-virtual-machine:~$ route Tabella di routing IP del kernel Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.15.2 0.0.0.0 UG 0 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 eth0 192.168.15.0 * 255.255.255.0 U 1 0 0 eth0 So, here it say to me that the default gateway is 192.168.15.2 (that is not my router ip address), why? My idea is that it could depend by the NAT. Because my Windows system is connected using the wireless but in the virtualized Ubuntu I see that I am connected to a "wired network". So I think that the NAT virtualize a network adapter (or something like this) and that 192.168.15.2 could be the ip address of this network adapter... But it seems strange to me because, as you can see in the previous ipconfig output the VmWare network adapter addresses are: 192.168.129.1 and 192.168.15.1. So I have also 2 others doubts: 1) What device represents the 192.168.15.2 ip address that the virtualized Ubuntu see as Default gateway but that is not my router? 2) What exactly do the two VmWare network adapter that I have configured into my Windows 8 system? There is a way to discover my router ip from the virtualized Ubuntu system ? Tnx Andrea

    Read the article

  • JMS Step 6 - How to Set Up an AQ JMS (Advanced Queueing JMS) for SOA Purposes

    - by John-Brown.Evans
    JMS Step 6 - How to Set Up an AQ JMS (Advanced Queueing JMS) for SOA Purposes .jblist{list-style-type:disc;margin:0;padding:0;padding-left:0pt;margin-left:36pt} ol{margin:0;padding:0} .c17_6{vertical-align:top;width:468pt;border-style:solid;border-color:#000000;border-width:1pt;padding:5pt 5pt 5pt 5pt} .c5_6{vertical-align:top;border-style:solid;border-color:#000000;border-width:1pt;padding:0pt 5pt 0pt 5pt} .c6_6{vertical-align:top;width:156pt;border-style:solid;border-color:#000000;border-width:1pt;padding:5pt 5pt 5pt 5pt} .c15_6{background-color:#ffffff} .c10_6{color:#1155cc;text-decoration:underline} .c1_6{text-align:center;direction:ltr} .c0_6{line-height:1.0;direction:ltr} .c16_6{color:#666666;font-size:12pt} .c18_6{color:inherit;text-decoration:inherit} .c8_6{background-color:#f3f3f3} .c2_6{direction:ltr} .c14_6{font-size:8pt} .c11_6{font-size:10pt} .c7_6{font-weight:bold} .c12_6{height:0pt} .c3_6{height:11pt} .c13_6{border-collapse:collapse} .c4_6{font-family:"Courier New"} .c9_6{font-style:italic} .title{padding-top:24pt;line-height:1.15;text-align:left;color:#000000;font-size:36pt;font-family:"Arial";font-weight:bold;padding-bottom:6pt} .subtitle{padding-top:18pt;line-height:1.15;text-align:left;color:#666666;font-style:italic;font-size:24pt;font-family:"Georgia";padding-bottom:4pt} li{color:#000000;font-size:10pt;font-family:"Arial"} p{color:#000000;font-size:10pt;margin:0;font-family:"Arial"} h1{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:24pt;font-family:"Arial";font-weight:normal} h2{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:18pt;font-family:"Arial";font-weight:normal} h3{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:14pt;font-family:"Arial";font-weight:normal} h4{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:12pt;font-family:"Arial";font-weight:normal} h5{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:11pt;font-family:"Arial";font-weight:normal} h6{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:10pt;font-family:"Arial";font-weight:normal} This post continues the series of JMS articles which demonstrate how to use JMS queues in a SOA context. The previous posts were: JMS Step 1 - How to Create a Simple JMS Queue in Weblogic Server 11g JMS Step 2 - Using the QueueSend.java Sample Program to Send a Message to a JMS Queue JMS Step 3 - Using the QueueReceive.java Sample Program to Read a Message from a JMS Queue JMS Step 4 - How to Create an 11g BPEL Process Which Writes a Message Based on an XML Schema to a JMS Queue JMS Step 5 - How to Create an 11g BPEL Process Which Reads a Message Based on an XML Schema from a JMS Queue This example leads you through the creation of an Oracle database Advanced Queue and the related WebLogic server objects in order to use AQ JMS in connection with a SOA composite. If you have not already done so, I recommend you look at the previous posts in this series, as they include steps which this example builds upon. The following examples will demonstrate how to write and read from the queue from a SOA process. 1. Recap and Prerequisites In the previous examples, we created a JMS Queue, a Connection Factory and a Connection Pool in the WebLogic Server Console. Then we wrote and deployed BPEL composites, which enqueued and dequeued a simple XML payload. AQ JMS allows you to interoperate with database Advanced Queueing via JMS in WebLogic server and therefore take advantage of database features, while maintaining compliance with the JMS architecture. AQ JMS uses the WebLogic JMS Foreign Server framework. A full description of this functionality can be found in the following Oracle documentation Oracle® Fusion Middleware Configuring and Managing JMS for Oracle WebLogic Server 11g Release 1 (10.3.6) Part Number E13738-06 7. Interoperating with Oracle AQ JMS http://docs.oracle.com/cd/E23943_01/web.1111/e13738/aq_jms.htm#CJACBCEJ For easier reference, this sample will use the same names for the objects as in the above document, except for the name of the database user, as it is possible that this user already exists in your database. We will create the following objects Database Objects Name Type AQJMSUSER Database User MyQueueTable Advanced Queue (AQ) Table UserQueue Advanced Queue WebLogic Server Objects Object Name Type JNDI Name aqjmsuserDataSource Data Source jdbc/aqjmsuserDataSource AqJmsModule JMS System Module AqJmsForeignServer JMS Foreign Server AqJmsForeignServerConnectionFactory JMS Foreign Server Connection Factory AqJmsForeignServerConnectionFactory AqJmsForeignDestination AQ JMS Foreign Destination queue/USERQUEUE eis/aqjms/UserQueue Connection Pool eis/aqjms/UserQueue 2. Create a Database User and Advanced Queue The following steps can be executed in the database client of your choice, e.g. JDeveloper or SQL Developer. The examples below use SQL*Plus. Log in to the database as a DBA user, for example SYSTEM or SYS. Create the AQJMSUSER user and grant privileges to enable the user to create AQ objects. Create Database User and Grant AQ Privileges sqlplus system/password as SYSDBA GRANT connect, resource TO aqjmsuser IDENTIFIED BY aqjmsuser; GRANT aq_user_role TO aqjmsuser; GRANT execute ON sys.dbms_aqadm TO aqjmsuser; GRANT execute ON sys.dbms_aq TO aqjmsuser; GRANT execute ON sys.dbms_aqin TO aqjmsuser; GRANT execute ON sys.dbms_aqjms TO aqjmsuser; Create the Queue Table and Advanced Queue and Start the AQ The following commands are executed as the aqjmsuser database user. Create the Queue Table connect aqjmsuser/aqjmsuser; BEGIN dbms_aqadm.create_queue_table ( queue_table = 'myQueueTable', queue_payload_type = 'sys.aq$_jms_text_message', multiple_consumers = false ); END; / Create the AQ BEGIN dbms_aqadm.create_queue ( queue_name = 'userQueue', queue_table = 'myQueueTable' ); END; / Start the AQ BEGIN dbms_aqadm.start_queue ( queue_name = 'userQueue'); END; / The above commands can be executed in a single PL/SQL block, but are shown as separate blocks in this example for ease of reference. You can verify the queue by executing the SQL command SELECT object_name, object_type FROM user_objects; which should display the following objects: OBJECT_NAME OBJECT_TYPE ------------------------------ ------------------- SYS_C0056513 INDEX SYS_LOB0000170822C00041$$ LOB SYS_LOB0000170822C00040$$ LOB SYS_LOB0000170822C00037$$ LOB AQ$_MYQUEUETABLE_T INDEX AQ$_MYQUEUETABLE_I INDEX AQ$_MYQUEUETABLE_E QUEUE AQ$_MYQUEUETABLE_F VIEW AQ$MYQUEUETABLE VIEW MYQUEUETABLE TABLE USERQUEUE QUEUE Similarly, you can view the objects in JDeveloper via a Database Connection to the AQJMSUSER. 3. Configure WebLogic Server and Add JMS Objects All these steps are executed from the WebLogic Server Administration Console. Log in as the webLogic user. Configure a WebLogic Data Source The data source is required for the database connection to the AQ created above. Navigate to domain > Services > Data Sources and press New then Generic Data Source. Use the values:Name: aqjmsuserDataSource JNDI Name: jdbc/aqjmsuserDataSource Database type: Oracle Database Driver: *Oracle’ Driver (Thin XA) for Instance connections; Versions:9.0.1 and later Connection Properties: Enter the connection information to the database containing the AQ created above and enter aqjmsuser for the User Name and Password. Press Test Configuration to verify the connection details and press Next. Target the data source to the soa server. The data source will be displayed in the list. It is a good idea to test the data source at this stage. Click on aqjmsuserDataSource, select Monitoring > Testing > soa_server1 and press Test Data Source. The result is displayed at the top of the page. Configure a JMS System Module The JMS system module is required to host the JMS foreign server for AQ resources. Navigate to Services > Messaging > JMS Modules and select New. Use the values: Name: AqJmsModule (Leave Descriptor File Name and Location in Domain empty.) Target: soa_server1 Click Finish. The other resources will be created in separate steps. The module will be displayed in the list.   Configure a JMS Foreign Server A foreign server is required in order to reference a 3rd-party JMS provider, in this case the database AQ, within a local WebLogic server JNDI tree. Navigate to Services > Messaging > JMS Modules and select (click on) AqJmsModule to configure it. Under Summary of Resources, select New then Foreign Server. Name: AqJmsForeignServer Targets: The foreign server is targeted automatically to soa_server1, based on the JMS module’s target. Press Finish to create the foreign server. The foreign server resource will be listed in the Summary of Resources for the AqJmsModule, but needs additional configuration steps. Click on AqJmsForeignServer and select Configuration > General to complete the configuration: JNDI Initial Context Factory: oracle.jms.AQjmsInitialContextFactory JNDI Connection URL: <empty> JNDI Properties Credential:<empty> Confirm JNDI Properties Credential: <empty> JNDI Properties: datasource=jdbc/aqjmsuserDataSource This is an important property. It is the JNDI name of the data source created above, which points to the AQ schema in the database and must be entered as a name=value pair, as in this example, e.g. datasource=jdbc/aqjmsuserDataSource, including the “datasource=” property name. Default Targeting Enabled: Leave this value checked. Press Save to save the configuration. At this point it is a good idea to verify that the data source was written correctly to the config file. In a terminal window, navigate to $MIDDLEWARE_HOME/user_projects/domains/soa_domain/config/jms  and open the file aqjmsmodule-jms.xml . The foreign server configuration should contain the datasource name-value pair, as follows:   <foreign-server name="AqJmsForeignServer">         <default-targeting-enabled>true</default-targeting-enabled>         <initial-context-factory>oracle.jms.AQjmsInitialContextFactory</initial-context-factory>         <jndi-property>           <key> datasource </key>           <value> jdbc/aqjmsuserDataSource </value>         </jndi-property>   </foreign-server> </weblogic-jms> Configure a JMS Foreign Server Connection Factory When creating the foreign server connection factory, you enter local and remote JNDI names. The name of the connection factory itself and the local JNDI name are arbitrary, but the remote JNDI name must match a specific format, depending on the type of queue or topic to be accessed in the database. This is very important and if the incorrect value is used, the connection to the queue will not be established and the error messages you get will not immediately reflect the cause of the error. The formats required (Remote JNDI names for AQ JMS Connection Factories) are described in the section Configure AQ Destinations  of the Oracle® Fusion Middleware Configuring and Managing JMS for Oracle WebLogic Server document mentioned earlier. In this example, the remote JNDI name used is   XAQueueConnectionFactory  because it matches the AQ and data source created earlier, i.e. thin with AQ. Navigate to JMS Modules > AqJmsModule > AqJmsForeignServer > Connection Factories then New.Name: AqJmsForeignServerConnectionFactory Local JNDI Name: AqJmsForeignServerConnectionFactory Note: this local JNDI name is the JNDI name which your client application, e.g. a later BPEL process, will use to access this connection factory. Remote JNDI Name: XAQueueConnectionFactory Press OK to save the configuration. Configure an AQ JMS Foreign Server Destination A foreign server destination maps the JNDI name on the foreign JNDI provider to the respective local JNDI name, allowing the foreign JNDI name to be accessed via the local server. As with the foreign server connection factory, the local JNDI name is arbitrary (but must be unique), but the remote JNDI name must conform to a specific format defined in the section Configure AQ Destinations  of the Oracle® Fusion Middleware Configuring and Managing JMS for Oracle WebLogic Server document mentioned earlier. In our example, the remote JNDI name is Queues/USERQUEUE , because it references a queue (as opposed to a topic) with the name USERQUEUE. We will name the local JNDI name queue/USERQUEUE, which is a little confusing (note the missing “s” in “queue), but conforms better to the JNDI nomenclature in our SOA server and also allows us to differentiate between the local and remote names for demonstration purposes. Navigate to JMS Modules > AqJmsModule > AqJmsForeignServer > Destinations and select New.Name: AqJmsForeignDestination Local JNDI Name: queue/USERQUEUE Remote JNDI Name:Queues/USERQUEUE After saving the foreign destination configuration, this completes the JMS part of the configuration. We still need to configure the JMS adapter in order to be able to access the queue from a BPEL processt. 4. Create a JMS Adapter Connection Pool in Weblogic Server Create the Connection Pool Access to the AQ JMS queue from a BPEL or other SOA process in our example is done via a JMS adapter. To enable this, the JmsAdapter in WebLogic server needs to be configured to have a connection pool which points to the local connection factory JNDI name which was created earlier. Navigate to Deployments > Next and select (click on) the JmsAdapter. Select Configuration > Outbound Connection Pools and New. Check the radio button for oracle.tip.adapter.jms.IJmsConnectionFactory and press Next. JNDI Name: eis/aqjms/UserQueue Press Finish Expand oracle.tip.adapter.jms.IJmsConnectionFactory and click on eis/aqjms/UserQueue to configure it. The ConnectionFactoryLocation must point to the foreign server’s local connection factory name created earlier. In our example, this is AqJmsForeignServerConnectionFactory . As a reminder, this connection factory is located under JMS Modules > AqJmsModule > AqJmsForeignServer > Connection Factories and the value needed here is under Local JNDI Name. Enter AqJmsForeignServerConnectionFactory  into the Property Value field for ConnectionFactoryLocation. You must then press Return/Enter then Save for the value to be accepted. If your WebLogic server is running in Development mode, you should see the message that the changes have been activated and the deployment plan successfully updated. If not, then you will manually need to activate the changes in the WebLogic server console.Although the changes have been activated, the JmsAdapter needs to be redeployed in order for the changes to become effective. This should be confirmed by the message Remember to update your deployment to reflect the new plan when you are finished with your changes. Redeploy the JmsAdapter Navigate back to the Deployments screen, either by selecting it in the left-hand navigation tree or by selecting the “Summary of Deployments” link in the breadcrumbs list at the top of the screen. Then select the checkbox next to JmsAdapter and press the Update button. On the Update Application Assistant page, select “Redeploy this application using the following deployment files” and press Finish. After a few seconds you should get the message that the selected deployments were updated. The JMS adapter configuration is complete and it can now be used to access the AQ JMS queue. You can verify that the JNDI name was created correctly, by navigating to Environment > Servers > soa_server1 and View JNDI Tree. Then scroll down in the JNDI Tree Structure to eis and select aqjms. This concludes the sample. In the following post, I will show you how to create a BPEL process which sends a message to this advanced queue via JMS. Best regards John-Brown Evans Oracle Technology Proactive Support Delivery

    Read the article

  • OSS4 on Debian Squeeze

    - by mit
    Hi, I am trying to get OSS4 to work on a Debian Squeeze 64 bit machine with an usb sound adapter. There is no sound from this adapter at the present, although it worked just before on the previous installation. You can see the output of some commands here: $ sudo /etc/init.d/oss4-base restart Stopping Open Sound System: SNDCTL_MIX_EXTINFO: No such device or address done. Starting Open Sound System: done (OSS is already loaded). $ sudo /etc/init.d/oss4-base stop Stopping Open Sound System: SNDCTL_MIX_EXTINFO: No such device or address done. $ sudo /etc/init.d/oss4-base start Starting Open Sound System: done (OSS is already loaded). $ ossinfo Version info: OSS 4.2 (b 2002/201001250441) (0x00040100) GPL Platform: Linux/x86_64 2.6.32-5-xen-amd64 #1 SMP Fri Dec 10 17:41:50 UTC 2010 (pc11) Number of audio devices: 2 Number of audio engines: 2 Number of MIDI devices: 0 Number of mixer devices: 2 Device objects 0: osscore0 OSS core services 1: oss_hdaudio0 ATI HD Audio interrupts=0 (613) HD Audio controller ATI HD Audio Vendor ID 0x10024383 Subvendor ID 0x10192816 Codec 0: Not present 2: oss_usb0 USB audio core services 3: usb0d8c0126-0 USB sound device 4: usb0d8c0126-1 USB sound device 5: usb0d8c0126-2 USB sound device 6: usb0d8c0126-3 USB sound device MIDI devices (/dev/midi*) Mixer devices 0: (USB sound device )(Mixer 0 of device object 3) 1: USB sound device (Mixer 0 of device object 5) Audio devices (USB sound device play /dev/oss/usb0d8c0126-1/pcm0 ) (device index 0) USB sound device play /dev/oss/usb0d8c0126-3/pcm0 (device index 1) Nodes /dev/dsp -> /dev/oss/usb0d8c0126-1/pcm0 /dev/dsp_out -> /dev/oss/usb0d8c0126-1/pcm0 /dev/dsp_mmap -> /dev/oss/usb0d8c0126-1/pcm0 $ osstest Sound subsystem and version: OSS 4.2 (b 2002/201001250441) (0x00040100) Platform: Linux/x86_64 2.6.32-5-xen-amd64 #1 SMP Fri Dec 10 17:41:50 UTC 2010 *** Scanning sound adapter #-1 *** /dev/oss/usb0d8c0126-1/pcm0 (audio engine 0): USB sound device play - Device not present - Skipping *** Scanning sound adapter #-1 *** /dev/oss/usb0d8c0126-3/pcm0 (audio engine 1): USB sound device play - Performing audio playback test... /dev/oss/usb0d8c0126-3/pcm0: No such file or directory Can't open the device *** Some errors were detected during the tests *** $ ossxmix /dev/oss/usb0d8c0126-2/mix0: No such file or directory No mixers could be opened $ ossmix SNDCTL_MIX_EXTINFO: No such device or address ad@pc11:~$ man ossmix ad@pc11:~$ ossmix -a SNDCTL_MIX_EXTINFO: No such device or address ad@pc11:~$ man ossmix ad@pc11:~$ ossmix -D SNDCTL_MIX_EXTINFO: No such device or address ad@pc11:~$ ossmix -D 0 SNDCTL_MIX_EXTINFO: No such device or address ad@pc11:~$ man ossmix ad@pc11:~$ ossxmix /dev/oss/usb0d8c0126-2/mix0: No such file or directory No mixers could be opened How can I make oss sound work? I can add more information if necessary.

    Read the article

  • How to set up Mod_WSGI for Python on Ubuntu

    - by AutomatedTester
    Hi, I am trying to setup MOD_WSGI on my Ubuntu box. I have found steps that said I needed to do the following steps I found at http://ubuntuforums.org/showthread.php?t=833766 sudo apt-get install libapache2-mod-wsgi sudo a2enmod mod-wsgi sudo /etc/init.d/apache2 restart sudo gedit /etc/apache2/sites-available/default and update the Directory <Directory /var/www/> Options Indexes FollowSymLinks MultiViews ExecCGI AddHandler cgi-script .cgi AddHandler wsgi-script .wsgi AllowOverride None Order allow,deny allow from all </Directory> sudo /etc/init.d/apache2 restart Created test.wsgi with def application(environ, start_response): status = '200 OK' output = 'Hello World!' response_headers = [('Content-type', 'text/plain'), ('Content-Length', str(len(output)))] start_response(status, response_headers) return [output] Step 2 fails because it says it can't find mod-wsgi even though the apt-get found it. If I carry on with the steps the python app just shows as plain text in a browser. Any ideas what I have done wrong? EDIT: Results for questions asked automatedtester@ubuntu:~$ dpkg -l libapache2-mod-wsgi Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Description +++-======================================-======================================-============================================================================================ ii libapache2-mod-wsgi 2.5-1 Python WSGI adapter module for Apache automatedtester@ubuntu:~$ dpkg -s libapache2-mod-wsgi Package: libapache2-mod-wsgi Status: install ok installed Priority: optional Section: python Installed-Size: 376 Maintainer: Ubuntu MOTU Developers <[email protected]> Architecture: i386 Source: mod-wsgi Version: 2.5-1 Depends: apache2, apache2.2-common, libc6 (>= 2.4), libpython2.6 (>= 2.6), python (>= 2.5), python (<< 2.7) Suggests: apache2-mpm-worker | apache2-mpm-event Conffiles: /etc/apache2/mods-available/wsgi.load 06d2b4d2c95b28720f324bd650b7cbd6 /etc/apache2/mods-available/wsgi.conf 408487581dfe024e8475d2fbf993a15c Description: Python WSGI adapter module for Apache The mod_wsgi adapter is an Apache module that provides a WSGI (Web Server Gateway Interface, a standard interface between web server software and web applications written in Python) compliant interface for hosting Python based web applications within Apache. The adapter provides significantly better performance than using existing WSGI adapters for mod_python or CGI. Original-Maintainer: Debian Python Modules Team <[email protected]> Homepage: http://www.modwsgi.org/ automatedtester@ubuntu:~$ sudo a2enmod libapache2-mod-wsgi ERROR: Module libapache2-mod-wsgi does not exist! automatedtester@ubuntu:~$ sudo a2enmod mod-wsgi ERROR: Module mod-wsgi does not exist! FURTHER EDIT FOR RMYates automatedtester@ubuntu:~$ apache2ctl -t -D DUMP_MODULES apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName Loaded Modules: core_module (static) log_config_module (static) logio_module (static) mpm_worker_module (static) http_module (static) so_module (static) alias_module (shared) auth_basic_module (shared) authn_file_module (shared) authz_default_module (shared) authz_groupfile_module (shared) authz_host_module (shared) authz_user_module (shared) autoindex_module (shared) cgid_module (shared) deflate_module (shared) dir_module (shared) env_module (shared) mime_module (shared) negotiation_module (shared) python_module (shared) setenvif_module (shared) status_module (shared) Syntax OK automatedtester@ubuntu:~$

    Read the article

  • AIX: iscsi volumes disappear after reboot

    - by Dan
    We have an IBM P505 AIX box, with two internal disks and a defined iSCSI volume. The iSCSI volume is defined in it's own volume group, and is connected to an IBM iSCSI DS3300 disk array via the secondary onboard ethernet port (ie, we're not using a dedicated HBA, we're using the second onboard ethernet port for iSCSI exclusively.) When we reboot the AIX box, the iSCSI volume doesn't get mounted (which is fine; I've figured out that it fails to mount because AIX tries mounting it's volumes before starting the networking stack.) The problem is, after the server has booted it fails to redetect the iSCSI target as a physical disk. This means the volume group (iscsivg) can't go online. if I run cfgmgr -v to redetect the iscsi volume it successfully detects the iscsi target volume and creates a physical volume reference, but allocates it a different volume ID to what was defined before. eg - rootvg contains hdisk 0 and 1 iscsivg was originally defined with hdisk2 as the physical iSCSI volume. after reboot and running cfgmgr -v, AIX detects physical volumes hdisk0, hdisk11 and hdisk3. As there's no hdisk2, I can't varyon the iscsivg volume group. I can't seem any existing hdisk2 definition in the ODM. I can't easily add or change the definition of the physcial disk in the iscsivg volume group as it won't "varyon". Exporting the volume group deletes it completely, recreating the volume group by "importing" it from the reallocated disk makes it available again, but surely there's a better way? Can I force a specific hdisk drive designation for an iscsi target? How do you bring online iSCSI volumes after a reboot? I assume this "just works" with a dedicated HBA instead of a generic ethernet adapter? By the way, the iSCSI volume works fine once it's mounted; we only have problems getting it working - and only with AIX. The iSCSI array works fine with our Linux and Windows servers; ie the volumes get detected and remounted after boot time without any problems, using generic ethernet adapters. Here's some of the config from the AIX box: defined disks / devices: # lsdev hdisk0 Available 06-08-01-5,0 16 Bit LVD SCSI Disk Drive hdisk1 Available 06-08-01-8,0 16 Bit LVD SCSI Disk Drive hdisk3 Available Other iSCSI Disk Drive iscsi0 Available iSCSI Protocol Device scsi0 Available 06-08-00 PCI-X Dual Channel Ultra320 SCSI Adapter bus scsi1 Available 06-08-01 PCI-X Dual Channel Ultra320 SCSI Adapter bus ses0 Available 06-08-01-15,0 SCSI Enclosure Services Device sisscsia0 Available 06-08 PCI-X Dual Channel Ultra320 SCSI Adapter iscsi target definition in /etc/iscsi/targets: # IBM DS3300 disk array # port 1 on second controller 10.10.xx.xxx 3260 iqn.1992-01.com.lsi:1535.600a0b80005b0a7fxxxxxxxxxxxx physical volumes (after reimporting the volume group) # lspv hdisk0 0003b08a0d4936b6 rootvg active hdisk1 0003b08aaa5cb366 rootvg active hdisk3 0003b08a032d04bb iscsivg active

    Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >