Search Results

Search found 1812 results on 73 pages for 'amd radeon'.

Page 31/73 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

  • Fan not detected by lm-sensors

    - by OrangeTux
    My fan is blowing hard, while my cpu temperature is 32 degrees I tried a lot of things to control my fan. Changed grub file GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi= pci=noacpi" _ GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=\"Linux\"" Ran sensors-detect : To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO) Unloading i2c-dev... OK Unloading i2c-i801... OK Unloading cpuid... OK Ran sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +34.0°C (crit = +90.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +34.0°C (high = +80.0°C, crit = +90.0°C) Core 2: +34.0°C (high = +80.0°C, crit = +90.0°C) Ran sudo start module-init-tools and sudo start module-init-tools module-init-tools stop/waiting As you can see my fan isn't detected. Running fancontrol gives me this: Loading configuration from /etc/fancontrol ... Error: Can't read configuration file Can you help me, please? I cannot use my laptop now in class. Thanks in advance. My system 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5400 Series] 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)

    Read the article

  • Installation problem ubuntu 12.04 with hp Pavilion dv4 3006tx laptop

    - by akeeb
    I am trying to install ubuntu 12.04 in my laptop containing model is HP Pavilion dv4 3006 tx , it has 1GB Graphics card( Video Graphics AMD Radeon HD 6750M (1 GB DDR5) ). Installation process is taken by my laptop but there are problem when rebooting it . When i want to open ubuntu as my operating system it does't open , my laptop Display turn off . more info about my pc configuration pls visit: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c02780984&jumpid=reg_R1002_USEN#A1 Collapse this comment

    Read the article

  • How to enable multiple displays with Catalyst drivers in Ubuntu 13.04?

    - by Lokitez
    First, I installed Ubuntu 13.04. I have an ATI Radeon HD 7850. The open source drivers allowed multiple displays, but were horrendously laggy (even opening a browser window took several seconds). When I installed the Catalyst proprietary drivers, performance was perfect. The only problem is that trying to enable dual-monitors in the Catalyst center was grayed out and in the Ubuntu settings resulted in the resolution error. Is there any way around this?

    Read the article

  • *Un*installing with Ubuntu Software Center (Centre) doesn't work on 64-bit 12.04.1

    - by likethesky
    Not sure if I'm doing something wrong, or if the .deb package I'm installing is broken in some way (I've built it, using NetBeans 7.2), or if indeed this is a bug in Software Center. When I install this particular 32-bit .deb on Ubuntu 10.04 LTS--all updates applied--(where it was built), GDebi shows it and has an 'Uninstall' button next to it. So it works fine to uninstall it there, via the GDebi GUI. However, when I install it on 12.04.1 LTS--all updates applied--it installs fine, but then does not show up in Ubuntu Software Center as available to be uninstalled. No combination of searching finds it. However, I can from the command line, do sudo apt-get purge javafxapplication1 and it finds it and deletes it. The same thing happens when I build a 64-bit .deb and attempt to install it to the same (64-bit AMD) or a different 64-bit Ubuntu 12.04.1 system. So it seems to be isolated to this NetBeans-generated .deb and the 64-bit AMD build (though I haven't tried it on a 32-bit 12.04.1 install yet). These are all on VirtualBox VMs, btw, if that matters. Any way to 'clean up' my Software Center and see if it's something I've done to get it in this state? Could this behavior be due to how this particular .deb has been built? (It doesn't have an 'Installed-Size' control field, so I do get the "Package is of bad quality" warning when I install it--which I do by clicking 'Ignore and install' button.) If you want all the gory details about why this happening--a bug has been reported against NetBeans for this behavior here: http://javafx-jira.kenai.com/browse/RT-25486 (EDIT: Just to be clear, the app installs fine, runs fine, all works as intended--I just can't get that 'bad package' message to go away, and now... I also can't uninstall it via Software Center, but rather, need to use sudo apt-get purge to uninstall it, after it installs. /END EDIT) Thanks for any pointers. I'm happy to report this as a bug against Ubuntu Software Center/Centre too, if that's what it seems to be, just tell me where to do so (a link). I'm a relative Ubuntu, NetBeans, and JavaFX newbie, though a long-time programmer. If I report it as a bug, I'll try it on the 32-bit build of 12.04.1 as well. Also, if I should add any more detail to the bug reported against NetBeans above, let me know--or feel free to add it yourself to the bug report above, if you would like. Thanks again!

    Read the article

  • Minecraft running slow after 13.10 upgrade

    - by user204279
    What to took for when Minecraft is running slow (~10 FPS) after a simple Ubuntu upgrade (from 13.04 to 13.10) without any manual change in the hardware/software graphic configuration and in the Minecraft configuration? Before the upgrade, it was running very well everytime (~60 FPS constantly). Any help? lspci | grep "VGA compatible controller" 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Whistler [Radeon HD 6730M/6770M/7690M XT] (rev ff)

    Read the article

  • Ubuntu 12.04 freeze on Ctrl+ALT+F1

    - by user93800
    I have Radeon card connected over HDMI to my TV. To resolve bug with HDMI-sound, I switch between virtual terminal and GNOME desktop each time the TV is switched on with CTRL+ALT+F1 and after console appear with CTRL+ALT+F7. It's ugly, but its worked for me. Since yesterday I got system freezes on CTRL+ALT+F1 - no reaction on keyboard, mouse pointer disappear at all, GNOME desktop still displayed. Probably has nothing to do with HDMI. Any suggestion how to resolve it?

    Read the article

  • Lag when recording with xvidcap?

    - by quangtruong1985
    I used Xvidcap to record my desktop, but the quality of video was too bad (it lagged so much). I also tried with all output formats that xvidcap support, increase the frame-per-second as much as possible and the quality always at 100% but nothing changed. Click to see my video on Youtube Im using 11.04 (unity) with compiz enabled. My card is ATI/AMD Mobility 5450 and all drivers were installed and activated. Please help me! Regards.

    Read the article

  • Misaligned Display on Resume

    - by Shaun Killingbeck
    I have an odd issue with my laptop display when resuming from suspend. When I have an additional monitor connected there is no issue. However without an additional monitor connected, after resuming only the left 10% of the laptop screen (just enough to show the Unity Launcher and a bit more) is visibly working, although strangely in a screenshot this same 10% is shown on the right hand side of the screenshot: I ran xrandr --verbose before and after resume, and the only difference (using diff) was: 2c2 < LVDS connected 1366x768+0+0 (0x98) normal (normal left inverted right x axis y axis) 344mm x 194mm --- > LVDS connected 1366x768+1280+0 (0x98) normal (normal left inverted right x axis y axis) 344mm x 194mm This seems to suggest the screen position has been shifted by 1280 horizontally, the width of the second monitor I use. Indeed, running the command xrandr --output LVDS --pos 0x0 does bring the screen back to normal. However, I don't want to have to run this command every time, I'd prefer to cure the source of the problem than just correct the symptoms. Any ideas on how to get Ubuntu to keep the display configuration settings from before suspend when it resumes? or why it changes at all? Heres some technical details that might be pertinent: HP Pavilion DV6 Laptop Ubuntu 13.04 AMD Radeon HD 6400M Series AMD Radeon HD 6520G Using proprietary flgrx-updates driver and amdcccle (Catalyst Control Center) (Unfortunately the open source driver causes my laptop to run even hotter than it already does, otherwise I'd use that) The contents of Xorg.conf: Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[0]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "0-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x768" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x768" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "1-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "1280 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1366x768" EndSection Section "Monitor" Identifier "1-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1280x1024" EndSection Section "Device" Identifier "amdcccle-Device[0]-0" Driver "fglrx" Option "Monitor-LVDS" "1-LVDS" Option "Monitor-CRT1" "1-CRT1" BusID "PCI:0:1:0" EndSection Section "Device" Identifier "amdcccle-Device[0]-1" Driver "fglrx" Option "Monitor-LVDS" "1-LVDS" BusID "PCI:0:1:0" Screen 1 EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Screen" Identifier "amdcccle-Screen[0]-0" Device "amdcccle-Device[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Virtual 2646 2646 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[0]-1" Device "amdcccle-Device[0]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

    Read the article

  • Byobu not displaying correct CPU temptrature

    - by aserwin
    I have an AMD FX 8120 proccy that is overclocked to 4100Mhz. Since the overclocking, Byobu and other temprature reading apps (Conky, etc) do not read the temprature accurately. I can see the correct temp in the bios, and with no overclocking everything inside of Gnome reads correctly. Why should this be? It is (seemingly) obviously an issue with Ubuntu (or perhaps Gnome?). Has anyone else experienced this?

    Read the article

  • Live CD has black screen HP DV6

    - by Shaun Killingbeck
    Attempting to install/try ubuntu (11.10, 12.04) on my new laptop, using a liveCD (and tried USB). I get the purple screen (with the man/keyboard at the bottom) and after that the screen flashes bright white before going black. Ubuntu continues to load in the background, with login sound etc but the screen is off. I have tried as many different solutions as I could find including: using nomodestep, xforcevesa, i915.modeset=0, and also now i915.modeset=1 in boot options (seperately): varying consequences, but either I end up at a blinking cursor with no prompt, a command line (startx fails: no screen found), or the original blank screen again Tried booting from VirtualBox - it crashes at the same place the screen would go blank when using a CD/USB tried 11.04: I don't have this problem BUT when trying to install, I get a ubi-partman error 141 (possibly down to the three partitions that came on my laptop... not sure why HP needed there own separate partition for HP Tools...) Model: HP Pavillion DV6 6B08SA Processor: AMD Quad-Core A6-3410MX APU with Radeon HD 6545G2 Dual Graphics (1.6 GHZ 4 MB L2 cache ) Chipset: AMD RS880M Any help would be greatly appreciated. I just want to be able to partition the drive and install Ubuntu. I'm assuming the issue is graphics card related, although I have no confirmation of that. Update: Tried the ?orkarounds on https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen - set gfxpayload=text changed nothing, removing splash did nothing and setting vesafb.nonsense=1 did nothing either. I'd like to be able to collect some log information somehow, but I can't get to a command line from the liveCD. tried using the latest 12.04 beta, same issue tried nomodeset without splash or quiet. get the following (tail of) output before it freezes on that screen: * Starting configure network device security [OK] * Starting configure network device [OK] [ 25.720899] ieee80211 phy0: w1_ops_config: change monitor mode: false (implement) [ 25.720923] ieee80211 phy0: w1_ops_config: change power-save mode: false (implement) * Starting restore sound card(s') mixer state(s) [fail] [ 25.721849] ieee80211 phy0: w1_ops_bss_info_changed: qos enabled: false (implement) * Stopping save kernel messages [OK] * Starting bluetooth [OK] * PulseAudio configured for per-user sessions saned disabled; edit /etc/default/saned [ 25.988016] hci_cmd_timer: hci0 command tx timeout [ 26.207225] bad LUN (0:1) [ 26.223735] bad target number (1:0) [ 26.252111] bad target number (2:0) [ 26.272170] bad target number (3:0) [ 26.300154] bad target number (4:0) [ 26.328162] bad target number (5:0) [ 26.344180] bad target number (6:0) [ 26.368142] bad target number (7:0) * Checking battery state... [OK] * Stopping System V runlevel capability [OK] Does this give any indication of the problem? the false (implement) messages also reappear when I press the power button to ask it to shutdown, followed by a [fail] status for killing remaining processes.

    Read the article

  • Ubuntu 12.04 Overheating HP Pavillion dm4 3011tx

    - by gevvek
    I have tried installing Ubuntu 12.04 on my HP Pavilion dm4 3011tx and after a few minutes the fans start to work very fast and my laptop starts to heat up; The CPU temperature got up to 70 degrees and was still rising before I turned the computer off. I installed the graphics drivers for my AMD Raedon graphics and tried switching to the integrated graphics but that didn't make a difference I have also tried Fedora and Linux Mint and they do the same thing. Can anyone help?

    Read the article

  • Freeze after 'init-bottom' script before installation starts on a Lenovo G475

    - by NikitaBaksalyar
    I'm trying to install Ubuntu 11.04 x86 on a Lenovo G475 laptop (based on AMD Fusion), but installation freezes after loading ends on a splash screen. I've tried to run installation without quiet and splash parameters - but result is the same: installation freeze after running "init-bottom" script. I thought that it can be because of BIOS settings, but I've also tried to change them several times without any result.

    Read the article

  • No suspend on lid closing on a Samsung Series 5 14" NP530U4BI

    - by dmeu
    Ok, i realize I am not the only one, but I will try to provide all info possible to make it exemplary as possible and narrow down the error sources. I have a fresh install of Ubuntu 12.04 and the suspend worked fine upon having it freshly installed but now it does not anymore. The suspend option from the system power button on the top right works fine. Things I did do which I don't know if they are related: Install and remove againthe FGLRX drivers (Radeon graphic card) Install Jupiter power managment (shutting it down is not changin anything) Plug in and out an external display The configuration I know of is well set: In System Settings/Power all is set to suspend when closing lid Double checked with dconf-editor, everything set to suspend So, from here on I don't know how to proceed.. what are common problems that cause this error? EDIT: My computer model is: Samsung Series 5 14" NP530U4BI $ sudo lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04) 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Thames [Radeon 7500M/7600M Series] 02:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6230 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller 04:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller

    Read the article

  • What are the advantages of mainframes?

    - by Scott Weinstein
    The downsides of Mainframes is well trodden ground; expensive, legacy, dwindling community, etc. I'm not particularly interested in the downsides, but I am curious if there are any benefits to mainframe hardware/software over the current Intel/AMD & Linux/Windows environment. I've been told that MFs are particularly good (and better than current servers) at heavy I/O loads. Is this still true?

    Read the article

  • Facebook video is too choppy to watch.

    - by Greg Pauline
    Using firefox and chrome on an Acer Aspire 5100 with an AMD Turion 64 MK36 processor with 2GB of RAM and an ATI Radeon Xpress 110 Graphics card. I had a problem viewing Vimeo and youtube that has now been resolved with the help of this website. But now I find that trying to watch Facebook videos from family and friends is impossible due to the terrible choppy frame rate and near freezing of the browser window. Any idea what is going on and how to fix it?

    Read the article

  • apt-get command problem

    - by Ramesh Khadka
    I am using Ubuntu 12.04 32 bit in hp pavilion dv6 laptop (AMD Processor) after upgrade and reboot, the desktop doesn't start and at cui (cltr + alt + f1) I login to my user and following error shows: apt-config :/lib/i386-linux-gnu/lib.so.6:version 'GLIBC_2.17' NOT FOUND (required by /usr/lib/i386-linux-gnu/libstdc++.so.6) when I type sudo apt-get command same error shows up and apt-get command doesn't work. All I have is character user interface. please help me.

    Read the article

  • Screen will not load in 11.04 alpha 3

    - by Saad Inam
    After updating from 10.10, there were no problems everything updated fine. I restarted the computer and selected Ubuntu from the boot menu but nothing came. it only shows a a black screen and it allows me to type. I have a feeling that this might be to do with the graphics driver, but how would i get a driver if nothing shows? I have ati radeon 5450 which runs with Catalyst Control Center on Windows. How can fix this?

    Read the article

  • Heating up problem in ubuntu 11.10 in vaio laptop

    - by shubham
    So i have the power top log and as you can see the two application touchpad and pci are just sucking so any solutions to this problem i am using i5 with ati graphic card if it its relevant 43.7% (365.8) PS/2 keyboard/mouse/touchpad interrupt 16.9% (141.3) [sky2@pci:0000:04:00.0] <interrupt> 12.3% (102.8) chrome 6.3% ( 52.8) compiz 6.1% ( 51.4) [Rescheduling interrupts] <kernel IPI> 5.8% ( 48.7) [radeon] <interrupt> 1.6% ( 13.6) [kernel scheduler] Load balancing tick 1.4% ( 11.7) kworker/0:1 1.2% ( 9.9) ubuntuone-syncd 0.9% ( 7.7) Xorg 0.7% ( 5.6) kworker/0:0

    Read the article

  • SIMD Extensions for the Database Storage Engine

    - by jchang
    For the last 15 years, Intel and AMD have been progressively adding special purpose extensions to their processor architectures. The extensions mostly pertain to vector operations with Single Instruction, Multiple Data (SIMD) concept. The reasoning was that achieving significant performance improvement over each successive generation for the general purpose elements had become extraordinarily difficult. On the other hand, SIMD performance could be significantly improved with special purpose registers...(read more)

    Read the article

  • Why does switching users completely hang my system every time?

    - by Stéphane
    I have a fresh install of 11.04 64bit, with 2 administrator accounts and 4 normal accounts. The 4 normal accounts (the kids' accounts) don't have passwords, they can login simply by clicking on their names. When any of the users -- either admin or normal -- tries to switch to another account by clicking in the top-right corner of the screen and selecting another user, the screen goes black and the entire system locks up. Even CTRL+ALT+F1 through F7 does nothing. This is reproducible 100% of the time on this system. I can ssh into the box when the console locks up, and by running top, I see that Xorg is consuming about 100% of the CPU. Looking at the output of "ps axfu" in bash while the system is in this "locked up" state, here is the lightdm and X process tree: USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1153 0.0 0.1 183508 4292 ? Ssl Dec26 0:00 lightdm root 2187 0.4 4.6 265976 164168 tty7 Ss+ 00:43 0:21 \_ /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch stephane 2612 0.0 0.3 266400 10736 ? Ssl 01:52 0:00 \_ /usr/bin/gnome-session --session=ubuntu stephane 2650 0.0 0.0 12264 276 ? Ss 01:52 0:00 | \_ /usr/bin/ssh-agent /usr/bin/dbus-launch --exit-with-session /usr/bin/gnome-session --session=ubuntu stephane 2703 0.8 3.0 562068 106548 ? Sl 01:52 0:08 | \_ compiz stephane 2801 0.0 0.0 4264 584 ? Ss 01:52 0:00 | | \_ /bin/sh -c /usr/bin/compiz-decorator stephane 2802 0.0 0.3 265744 13772 ? Sl 01:52 0:00 | | \_ /usr/bin/unity-window-decorator ...cut... root 3024 80.6 0.3 107928 13088 tty8 Rs+ 01:53 12:34 \_ /usr/bin/X :1 -auth /var/run/lightdm/root/:1 -nolisten tcp vt8 -novtswitch That last process, pid #3024 in this case, is what has the CPU pegged. In case it matters (I suspect it might) here is what I think may be the relevant information for my video card, taken from /var/log/Xorg.0.log: [ 3392.653] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libglx.so [ 3392.653] (II) Module glx: vendor="FireGL - AMD Technologies Inc." [ 3392.653] compiled for 6.9.0, module version = 1.0.0 ... [ 3392.655] (II) LoadModule: "fglrx" [ 3392.655] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so [ 3392.672] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." [ 3392.672] compiled for 1.4.99.906, module version = 8.88.7 [ 3392.672] Module class: X.Org Video Driver ... [ 3392.759] (==) fglrx(0): ATI 2D Acceleration Architecture enabled [ 3392.759] (--) fglrx(0): Chipset: "AMD Radeon HD 6410D" (Chipset = 0x9644) Lastly: I did see this posting: Change user on 11.10 hangs system ...but I checked, and the libpam-smbpass package isn't installed on this system.

    Read the article

  • Motherboard and Processor sync error panic and killing init

    - by pradeep
    I have installed Ubuntu 12.04LTS for the first time and this has problems while working. the system hangs out and panic error showing the message that motherboard and processor not syncing and attempted to kill init. I have a Gigabyte GA-MA74GMT-S2(AM3) board AMD Phenom II X2 555 processor 4gb ddr3 ram with L6 cache I would like to know why is this problem happening. this is a separate installation and system is also having windows7 running as a separate installation. need help fixing this.

    Read the article

  • Ubuntu boots to orange screen after install

    - by musicalfish8
    I have a problem in which I boot my computer and everything works normally, I see a purple screen with various partitions to select such as my Windows 7 and Ubuntu partitions. When I select the Ubuntu one, my computer boots to an orangish screen and plays what sounds like a drum sound once. Then nothing happens and I have to reboot my computer because the computer is stuck at this orange screen. EDIT: My hardware is: Asus M5A97 motherboard AMD Phenom II 630 processor MSI r6670 MD1GD5 GPU TrendNet TEW-641PC Wireless Card

    Read the article

  • Ubuntu 11.10 won't start after system update

    - by ShiroGeek
    Well i have a big problem with ubuntu 11.10 i really really like it but unfortunately whenever i make the update it simply freezes on the violet screen at the beginning without any writing :S I've reinstalled it three times Here is my comp Config Core2Duo 4Go of RAM Ati Radeon HD 5770 1Go ( something idk tells me it come from its driver but not sure) Ubuntu 11.10 64 Bits Windows 7 also installed 6Go of SWAP TWo dedicated ubuntu partitions one mounted as / And the other one as /home Thanks a lot

    Read the article

  • is it normal for ubuntu 11.10 to use 1 GB of memory?

    - by robert
    On my older system i ran the 32 bit version of Ubuntu with 4 GB of ram and noticed it rarely come near 1 gig of usage.I have my new system running with the 64 bit version.The new system is a quad core with 8 GB of ram and Ubuntu is using 1 gig now.Is this normal?I have run top and noticed certain processes such as compiz,xorg and lightdm seeming to be using a lot.I also upgraded in my new system with an msi radeon hd6450 graphics card that s supposed to have 2 gigs on it.

    Read the article

  • Ubuntu 12.10 running slow

    - by andrew
    I pasted syslog and perhaps anyone can see trouble that might need attention. It is running too slow for what I would suspect. Opening apps and web pages just takes forever. http://paste.ubuntu.com/1303211/ System Specs: Oct 24 12:42:55 ubuntu kernel: [ 1.369735] powernow-k8: Found 1 AMD V140 Processor (1 cpu cores) (version 2.20.00) http://en.wikipedia.org/wiki/List_of_AMD_Phenom_microprocessors#.22Champlain.22_.2845_nm.2C_Single-core.29_2

    Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >