Search Results

Search found 6253 results on 251 pages for 'apache2 ssl'.

Page 31/251 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

• Certificate Trusts Lists in IIS7

  - by BrettRobi

  I am trying to enable mutual authentication for my WebService hosted in IIS7. I have the server side cert setup and working but cannot figure out how to get a Certificate Trust List created and setup in IIS7 so that I can require and validate client side certificates. All of my client side certs are signed by my own root cert so I need to create a CTL that contains just my root cert and then have IIS validate client provided certs against the CTL. Can anyone shed some light on how to do this? IIS6 had a UI for assigning a CTL, but I can find nothing similar in IIS7. Update: I have now successfully used MakeCTL in wizard mode to create a CTL with a Friendly Name. However I don't have adsutil support on my IIS7 box so via other posts elsewhere I am trying to use the 'netsh http add sslcert' command to assign the CTL to my site. Before I could use this command I had to remove the existing SSL cert that was assigned to my site for server authentication. Then in my netsh command I specify the thumbprint of that very same SSL cert I removed, plus a made up appid, plus 'sslctlidentifier=MyCTL sslctlstorename=CA'. The resulting command is: netsh http add sslcert ipport=10.10.10.10:443 certhash=adfdffa988bb50736b8e58a54c1eac26ed005050 appid={ffc3e181-e14b-4a21-b022-59fc669b09ff} sslctlidentifier=MyCTL sslctlstorename=CA (the IP addr is munged), but I am getting this error: SSL Certificate add failed, Error: 1312 A specified logon session does not exist. It may already have been terminated. I am sure the error is related to the CTL options because if I remove them it works (though no CTL is assigned of course). Can anyone help me take this last step and make this work? UPDATE 01-07-2010: I never resolved this with IIS 7.0 and have since migrated our app to IIS 7.5 and am giving this another try. Per the response from Taras Chuhay I installed IIS6 Compatibility on my test server and tried the steps he documented using adsutil.vbs (which can also be found here). I immediately ran into this error: ErrNumber: -2147023584 Error trying to SET the Property: SslCtlIdentifier when running this command: adsutil.vbs set w3svc/1/SslCtlIdentifier MyFriendlyName I then went on to try the next adsutil.vbs command documented and it failed with the same error. I have verified that the CTL I created has a Friendly Name of MyFriendlyName and that it exists in the 'Intermediate Certification Authorities\Certificate Trust List' store of LocalComputer. So once again I am at a dead standstill. I don't know what else to try. Has anyone ever gotten CTL's to work with IIS7 or 7.5? Ever? Am I beating a DEAD horse. Google turns up nothing but my own posts and other similar stories. Update 2/23/10 - I've confirmed with Microsoft that this is a bug with IIS 7.5, but it does work with IIS 7. Check out this link for details: http://viisual.net/configuration/IIS7-CTLs.htm Update 6/08/10 - I can now confirm that KB981506 resolves this issue. There is a patch associated with this KB that must be applied to Server 2008 R2 machines to enable this functionality. Once that is installed all works flawlessly for me.

  Read the article

• CakePhp on IIS: How can I Edit URL Rewrite module for SSL Redirects

  - by AdrianB

  I've not dealt much with IIS rewrites, but I was able to import (and edit) the rewrites found throughout the cake structure (.htaccess files). I'll explain my configuration a little, then get to the meat of the problem. So my Cake php framework is working well and made possible by the url rewrite module 2.0 which I have successfully installed and configured for the site. The way cake is set up, the webroot folder (for cake, not iis) is set as the default folder for the site and exists inside the following hierarchy inetpub -wwwroot --cakePhp root ---application ----models ----views ----controllers ----WEBROOT // *** HERE *** ---cake core --SomeOtherSite Folder For this implementation, the url rewrite module uses the following rules (from the web.config file) ... <rewrite> <rules> <rule name="Imported Rule 1" stopProcessing="true"> <match url="^(.*)$" ignoreCase="false" /> <conditions logicalGrouping="MatchAll"> <add input="{REQUEST_FILENAME}" matchType="IsDirectory" negate="true" /> <add input="{REQUEST_FILENAME}" matchType="IsFile" negate="true" /> </conditions> <action type="Rewrite" url="index.php?url={R:1}" appendQueryString="true" /> </rule> <rule name="Imported Rule 2" stopProcessing="true"> <match url="^$" ignoreCase="false" /> <action type="Rewrite" url="/" /> </rule> <rule name="Imported Rule 3" stopProcessing="true"> <match url="(.*)" ignoreCase="false" /> <action type="Rewrite" url="/{R:1}" /> </rule> <rule name="Imported Rule 4" stopProcessing="true"> <match url="^(.*)$" ignoreCase="false" /> <conditions logicalGrouping="MatchAll"> <add input="{REQUEST_FILENAME}" matchType="IsDirectory" negate="true" /> <add input="{REQUEST_FILENAME}" matchType="IsFile" negate="true" /> </conditions> <action type="Rewrite" url="index.php?url={R:1}" appendQueryString="true" /> </rule> </rules> </rewrite> I've Installed my SSL certificate and created a site binding so that if i use the https:// protocol, everything is working fine within the site. I fear that attempts I have made at creating a rewrite are too far off base to understand results. The rules need to switch protocol without affecting the current set of rules which pass along url components to index.php (which is cake's entry point). My goal is this- Create a couple of rewrite rules that will [#1] redirect all user pages (in this general form http://domain.com/users/page/param/param/?querystring=value ) to use SSL and then [#2} direct all other https requests to use http (is this is even necessary?). [e.g. http://domain.com/users/login , http://domain.com/users/profile/uid:12345 , http://domain.com/users/payments?firsttime=true] ] to all use SSL [e.g. https://domain.com/users/login , https://domain.com/users/profile/uid:12345 , https://domain.com/users/payments?firsttime=true] ] Any help would be greatly appreciated.

  Read the article

• Running Apache and Tomcat together on different subdomains?

  - by Ritesh M Nayak

  Posted this on ServerFault but didn't get a response. Hoping I will have better luck on the Ubuntu site. I have been trying to get this working the whole of today. I have a server which resolves to the domain example.com . This is running Apache2 and Tomcat 6. The requirement is to direct requests to example.com to apache2 and app.example.com to Tomcat. I know I have to do a VirtualHost proxy pass for this to work. Here are the settings on my server. /etc/hosts file looks something like this 127.0.0.1 localhost localhost.localdomain example.com app.example.com I have two virtual host files for the different domains in /etc/apache2/sites-enabled /etc/apache2/sites-enabled/example.com looks like this <VirtualHost *:80> # Admin email, Server Name (domain name) and any aliases ServerAdmin webmaster@localhost ServerName example.com ServerAlias www.example.com DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> /etc/apache2/sites-enabled/app.example.com file looks like this <VirtualHost *:80> ServerName app.example.com ServerAlias www.app.example.com ProxyPreserveHost On ProxyPass / http://localhost:8080/ ProxyPassReverse / http://localhost:8080/ SetEnv force-proxy-request-1.0 1 SetEnv proxy-nokeepalive 1 </VirtualHost> mod_proxy and mod_rewrite are both enabled on the apache instance. I have a CNAME entry for both example.com and app.example.com. When accessing app.example.com, I get an 403 forbidden, saying I have no access to / on the server. What am I doing wrong?

  Read the article

• Trouble getting SSL to work with django + nginx + wsgi

  - by Kevin

  I've followed a couple of examples for Django + nginx + wsgi + ssl, but I can't get them to work. I simply get an error in my browser than I can't connect. I'm running two websites off the host. The config files are identical except for the ip addresses, server names, and directories. When neither use SSL, they work fine. When I try to listen on 443 with one of them, I can't connect to either. My config files are below, and any suggestions would be appreciated. server{ listen xxx.xxx.xxx.xxx:80; server_name sub.domain.com; access_log /home/django/logs/nginx_customerdb_http_access.log; error_log /home/django/logs/nginx_customerdb_http_error.log; location / { proxy_pass http://127.0.0.1:8080; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; client_max_body_size 10m; client_body_buffer_size 128k; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffers 32 4k; } location /site_media/ { alias /home/django/customerdb_site_media/; } location /admin-media/ { alias /home/django/django_admin_media/; } } server{ listen xxx.xxx.xxx.xxx:443; server_name sub.domain.com; access_log /home/django/logs/nginx_customerdb_http_access.log; error_log /home/django/logs/nginx_customerdb_http_error.log; ssl on; ssl_certificate sub.domain.com.crt; ssl_certificate_key sub.domain.com.key; ssl_prefer_server_ciphers on; location / { proxy_pass http://127.0.0.1:8080; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Protocol https; client_max_body_size 10m; client_body_buffer_size 128k; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffers 32 4k; } location /site_media/ { alias /home/django/customerdb_site_media/; } location /admin-media/ { alias /home/django/django_admin_media/; } } <VirtualHost *:8080> ServerName xxx.xxx.xxx.xxx ServerAlias xxx.xxx.xxx.xxx LogLevel warn ErrorLog /home/django/logs/apache_customerdb_error.log CustomLog /home/django/logs/apache_customerdb_access.log combined WSGIScriptAlias / /home/django/customerdb/apache/django.wsgi WSGIDaemonProcess customerdb_wsgi processes=4 threads=5 WSGIProcessGroup customerdb_wsgi SetEnvIf X-Forwarded-Protocol "^https$" HTTPS=on </VirtualHost> UDPATE: the existence of two sites (on separate IPs) on the host is the issue. if i delete the other site, the setting above mostly work. doing so also brings up another issue: chrome doesn't accept the site as secure saying that some content is not encrypted.

  Read the article

• Tomcat and ASP site under IIS6 with SSL

  - by Rafe

  I've been working on migrating our companies' website from it's original server to a new one and am having two different but possibly related problems. The box this is sitting on is a Windows 2003 server x64 running IIS 6. The Tomcat version is 5.5.x as it was the version the original deployment was built on. There are two other sites on the server one in plain HTML, another in PHP and the one I am trying to migrate is a combination of Java and ASP (the introductory/sign in pages being Java as well as many reports used for our clients and the administration pages being in ASP) First of all I can only access the site if I enter the ip followed by :8080 (xxx.xxx.xxx.xxx:8080). The original setup had an index.html file in the root of the site with a bit of javascript in the header that pointed the site to 'www.mysite.com/app/public' but if I try going directly to the site without the 8080 I get a 'page not found error' and the javascript redirector causes the same problem because it doesn't add the 8080 into the URL even though on the original site the 8080 wasn't present so I don't understand why it would need it now. The js redirect looks like this: <script language="JavaScript"> <!-- location.href = "/app/public/" location.replace("/app/public/"); //--> </script> When setting the site up I used the command line to unbind IIS from all of the ip's on the system (there are 12 ip's on this box) because I was led to believe Tomcat wanted to use localhost which wasn't accessible. I'm not sure if this was the right thing to do but I'm throwing it in for the sake of completeness. And actually, at this point trying to go to localhost from the server itself throws up a 'could not connect to localhost' error. If I go to localhost:8080 I get the tomcat welcome page. If I do localhost:8080/app/public I get the intro page to our website. So I'm not sure what I'm even looking at in this case, that is what the proper behavior should be. The second part of the problem is that if I do go to either the ip or localhost such as above (localhost:8080/app/public) and click on our login link it is supposed to transfer me to our login page yet instead I receive a 'could not connect' error and the url has changed to localhost:8443/app/secure. From my research I see that port 8443 is Tomcats SSL port and the server.xml alludes to it as follows: <Connector port="8080" maxHttpHeaderSize="8192" maxThreads="150" minSpareThreads="25" maxSpareThreads="75" enableLookups="false" redirectPort="8443" acceptCount="100" connectionTimeout="20000" disableUploadTimeout="true" /> I have an SSL certificate assigned to the site via IIS and was under the impression that by default Tomcat allowed IIS to handle secure connections but apparently something is munged because it's not working. There is another section in the server.xml that reads like this: <Connector port="8009" enableLookups="false" redirectPort="443" protocol="AJP/1.3" /> Which I'm not sure what it is for although port 443 is the SSL port that IIS uses so I'm confused as to what this is supposed to be doing. Another question I have is when does the isap_redirector actually come into play? How does it know when to try and serve pages through Tomcat and when not to? I've hunted around the 'net for an answer and have yet to find a clear dialogue on the subject. Anyone have any pointers as to where to look for a solution to all of this?

  Read the article

• Apache sends plain-text response when accessing SSL-enabled site without HTTPS

  - by animuson

  I've never encountered something such as this before. I was attempting to simply redirect the page to the HTTPS version if it determined that HTTPS was off, but instead it's displaying an HTML page rather than actually redirecting; and even odder, it's displaying it as text/plain! The VirtualHost Declaration (Sort of): ServerAdmin [email protected] DocumentRoot "/path/to/files" ServerName example.com SSLEngine On SSLCertificateFile /etc/ssh/certify/example.com.crt SSLCertificateKeyFile /etc/ssh/certify/example.com.key SSLCertificateChainFile /etc/ssh/certify/sub.class1.server.ca.pem <Directory "/path/to/files/"> AllowOverride All Options +FollowSymLinks DirectoryIndex index.php Order allow,deny Allow from all </Directory> RewriteEngine On RewriteCond %{HTTPS} off RewriteRule .* https://example.com:6161 [R=301] The Page Output: <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <html><head> <title>301 Moved Permanently</title> </head><body> <h1>Moved Permanently</h1> <p>The document has moved <a href="https://example.com:6161">here</a>.</p> <hr> <address>Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/1.0.0e DAV/2 Server at example.com Port 443</address> </body></html> I've tried moving the Rewrite stuff up above the SSL stuff hoping it'd do something and nothing happens. If I view the page with via HTTPS, it displays fine like it should. It's obviously detecting that I'm trying to rewrite the path, but it's not acting. The Apache error log does not indicate anything to me that might have gone wrong. When I remove the RewriteRules: <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <html><head> <title>400 Bad Request</title> </head><body> <h1>Bad Request</h1> <p>Your browser sent a request that this server could not understand.<br /> Reason: You're speaking plain HTTP to an SSL-enabled server port.<br /> Instead use the HTTPS scheme to access this URL, please.<br /> <blockquote>Hint: <a href="https://example.com/"><b>https://example.com/</b></a></blockquote></p> <p>Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.</p> <hr> <address>Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/1.0.0e DAV/2 Server at example.com Port 443</address> </body></html> I get the standard "you can't do this because you're not using SSL" response, which is also provided in text/plain rather than being rendered as HTML. This would make sense, it should only work for HTTPS-enabled connections, but I still want to redirect them to the HTTPS connection when it determines that it is not enabled. Thinking I could circumvent the system: I tried adding a ErrorDocument 400 https://example.com:6161 to the config file instead of using RewriteRules, and that just gave me a new message, still no cheese. <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <html><head> <title>302 Found</title> </head><body> <h1>Found</h1> <p>The document has moved <a href="https://example.com:6161">here</a>.</p> <hr> <address>Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/1.0.0e DAV/2 Server at example.com Port 443</address> </body></html> How can I force Apache to actually redirect rather than displaying a "301" page that shows HTML in plain-text format?

  Read the article

• Request Entity Too Large error while uploading files of more than 128KB over SSL

  - by tushar

  We have a web portal setup on Java spring framework. It running on tomcat app server. Portal is served through apache web server connected to tomcat through JK connector. Entire portal is HTTPS enabled using 443 port of apache. Apache version is : Apache/2.4.2 (Unix). it is the latest stable version of apache web server. Whenever we try to upload files more than 128 KB into the portal, We are facing 413 error: Request Entity Too Large The requested resource /teamleadchoachingtracking/doFileUpload does not allow request data with POST requests, or the amount of data provided in the request exceeds the capacity limit. In the apache error log we get the following errors: AH02018: request body exceeds maximum size (131072) for SSL buffer AH02257: could not buffer message body to allow SSL renegotiation to proceed We did search over google and there were suggestions to put SSLRenegBufferSize as some high value like 10MB. Based on these suggestions, we had put the following entry in virtualhost section of httpd config file: SSLRenegBufferSize 10486000 But still the error persists. Also we have specified SSLVerifyClient none, but still renegotiation is happening. This is a very inconsistent and frustrating error. Any help will be highly appreciated. Many thanks in advance.

  Read the article

• Django running on Apache+WSGI and apache SSL proxying

  - by Lessfoe

  Hi all, I'm trying to rewrite all requests for my Django server running on apache+WSGI ( inside my local network) and configured as the WSGI's wiki how to, except that I set a virtualhost for it. The server which from I want to rewrite requests is another apache server listening on port 80. I can manage it to work well if I don't try to enable SSL connection as the required way to connect. But I need all requests to Django server encrypted with SSL so I generally used this directive to achieve this ( on my public webserver ): Alias /dirname "/var/www/dirname" SSLVerifyClient none SSLOptions +FakeBasicAuth SSLRequireSSL AuthName "stuff name" AuthType Basic AuthUserFile /etc/httpd/djangoserver.passwd require valid-user # redirect all request to django.test:80 RewriteEngine On RewriteRule (.*)$ http://django.test/$1 [P] This configuration works if I try to load a specific page trough the external server from my browser. It is not working clicking my django application urls ( even tough the url seems correct when I put my mouse over). The url my public server is trying to serve use http ( instead of https ) and the directory "dirname" I specified on my apache configuration disappear, so it says that the page was not found. I think it depends on Django and its WSGI handler . Does anybody went trough my same problem? PS: I have already tried to modify the WSGI script . I'm Using Django 1.0.3, Apache 2.2 on a Fedora10 (inside), Apache 2.2 on the public server. Thanks in advance for your help. Fab

  Read the article

• How do I renew an expired Ubuntu OpenLDAP SSL Certificate

  - by Doug Symes

  We went through the steps of revoking an SSL Certificate used by our OpenLDAP server and renewing it but we are unable to start slapd. Here are the commands we used: openssl verify hostname_domain_com_cert.pem We got back that the certificate was expired but "OK" We revoked the certificate we'd been using: openssl ca -revoke /etc/ssl/certs/hostname_domain_com_cert.pem Revoking worked fine. We created the new Cert Request by passing it the key file as input: openssl req -new -key hostname_domain_com_key.pem -out newreq.pem We generated a new certificate using the newly created request file "newreq.pem" openssl ca -policy policy_anything -out newcert.pem -infiles newreq.pem We looked at our cn=config.ldif file and found the locations for the key and cert and placed the newly dated certificate in the needed path. Still we are unable to start slapd with: service slapd start We get this message: Starting OpenLDAP: slapd - failed. The operation failed but no output was produced. For hints on what went wrong please refer to the system's logfiles (e.g. /var/log/syslog) or try running the daemon in Debug mode like via "slapd -d 16383" (warning: this will create copious output). Below, you can find the command line options used by this script to run slapd. Do not forget to specify those options if you want to look to debugging output: slapd -h 'ldap:/// ldapi:/// ldaps:///' -g openldap -u openldap -F /etc/ldap/slapd.d/ Here is what we found in /var/log/syslog Oct 23 20:18:25 ldap1 slapd[2710]: @(#) $OpenLDAP: slapd 2.4.21 (Dec 19 2011 15:40:04) $#012#011buildd@allspice:/build/buildd/openldap-2.4.21/debian/build/servers/slapd Oct 23 20:18:25 ldap1 slapd[2710]: main: TLS init def ctx failed: -1 Oct 23 20:18:25 ldap1 slapd[2710]: slapd stopped. Oct 23 20:18:25 ldap1 slapd[2710]: connections_destroy: nothing to destroy. We are not sure what else to try. Any ideas?

  Read the article

• SSL on nginx + unicorn got "Error 102 (net::ERR_CONNECTION_REFUSED)"

  - by panggi

  I tried to deploy my app on EC2 (opened port: 22, 80, 443) App: Rails 3.2.2 Server: nginx 1.2.1 unicorn gem (latest) ubuntu 12.04 Deployer: Capistrano I tried to follow the instruction in Railscasts : http://railscasts.com/episodes/335-deploying-to-a-vps (Sorry, it's a Pro Episode) Anything fine with normal port 80 http but i got Error 102 after trying to use SSL, here is the nginx.conf content: upstream unicorn { server unix:/tmp/unicorn.frontend.sock fail_timeout=0; } server { server_name beta.sukeru.com; listen 443 default; root /home/deployer/apps/appname/current/public; ssl on; ssl_certificate server.crt; ssl_certificate_key server.key; ssl_session_timeout 5m; ssl_protocols SSLv2 SSLv3 TLSv1; ssl_ciphers HIGH:!aNULL:!MD5; ssl_prefer_server_ciphers on; location / { proxy_set_header Host $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Proto https; proxy_redirect off; proxy_pass http://unicorn; } error_page 500 502 503 504 /500.html; } In production.rb i set: config.force_ssl = true Can anyone give a solution for this? :)

  Read the article

• What is causing apache2 proxy error when forwarding to tomcat?

  - by Dark Star1

  I set up apache to proxy for tomcat but I am getting the following error when I target the page. I sometimes get a blank page or a 503: [Error] [Mon Dec 03 04:58:16 2012] [error] proxy: ap_get_scoreboard_lb(2) failed in child 29611 for worker proxy:reverse [Mon Dec 03 04:58:16 2012] [error] proxy: ap_get_scoreboard_lb(1) failed in child 29611 for worker https://localhost:8443/ [Mon Dec 03 04:58:16 2012] [error] proxy: ap_get_scoreboard_lb(0) failed in child 29611 for worker http://localhost:8080/ I have two vhosts configured on the vm as follows: [http host] <VirtualHost *:80> ServerName www.mysite.net ServerAlias mysite.net ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass / http://localhost:8080/ retry=0 ProxyPassReverse / http://localhost:8080/ retry=0 </VirtualHost> [ssl vhost] <VirtualHost *:443> ServerName www.mysite.net ServerAlias mysite.net ErrorLog /var/log/apache2/error.log LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On SSLEngine on SSLProxyEngine on SSLCertificateFile /etc/apache2/ssl/server.crt SSLCertificateKeyFile /etc/apache2/ssl/server.key ProxyRequests Off ProxyPreserveHost On ProxyPass / https://localhost:8443/ retry=0 ProxyPassReverse / https://localhost:8443/ retry=0 </VirtualHost> My system details are: Apache/2.2.22 (Ubuntu) mod_jk/1.2.32 mod_ssl/2.2.22 OpenSSL/1.0.1 mod proxy_http is also enabled.

  Read the article

• apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName

  - by user35402

  I keep getting this warning when I (re)start Apache. Restarting web server apache2 apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName ... waiting apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName [ OK ] This is the content of my etc/hosts file: #127.0.0.1 hpdtp-ubuntu910 #testproject.localhost localhost.localdomain localhost #127.0.1.1 hpdtp-ubuntu910 127.0.0.1 localhost 127.0.0.1 testproject.localhost 127.0.1.1 hpdtp-ubuntu910 # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts This is the content of my /etc/apache2/sites-enabled/000-default file: <VirtualHost *:80> ServerName testproject.localhost DocumentRoot "/home/morpheous/work/websites/testproject/web" DirectoryIndex index.php <Directory "/home/morpheous/work/websites/testproject/web"> AllowOverride All Allow from All </Directory> Alias /sf /lib/vendor/symfony/symfony-1.3.2/data/web/sf <Directory "/lib/vendor/symfony/symfony-1.3.2/data/web/sf"> AllowOverride All Allow from All </Directory> </VirtualHost> When I go to http://testproject.localhost, I get a blank page can anyone spot what I am doing wrong?

  Read the article

• Firefox is very slow when establish SSL sessions

  - by yanglei

  Using wireshark, I discovered that Firefox v3.0 gets stuck every time before "client key exchange, change cipher spec" stage when establishing a SSL session. Specifically, it takes 0.8~1.8 second before Firefox send "Client Key Exchange" request. This is unacceptable since our application is HTTPS only. I tested this on IE6 and IE8, both works well. Any clues? [Update] Finally, I found the reason of 1 ~ 2 seconds stuck by displaying all captured packets in Wireshark. After the "server hello" stage, Firefox makes a request to ocsp.verisign.com combined with an additional DNS lookup for that domain. Firefox must wait the revocation status from OCSP before entering the next stage of SSL. Depends on whether DNS cache is in effect, this process takes 1 ~ 2 seconds. A interesting observation is that the IP packet contains "client key exchange" has a high possibility to get lost and thus a TCP retransmission is necessary. When this happens, the process can take 3 seconds at worst. I'm not sure if this is a coincidence or a bug. Anyway, here is the result from Wireshark: (delta-time) 0.369296 src-ip dst-ip TCP [ACK] Seq=161 Ack=2741 Win=65340 Len=0 2.538835 src-ip dst-ip TLSv1 Client Key Exchange, Change Cipher Spec, Finished 2.987034 src-ip dst-ip TLSv1 [TCP Retransmission] Client Key Exchange, Change Cipher Spec, Finished The difference between Firefox and IE is this: Firefox 3 enables OCSP checking by default where as IE only supports it. So, there is no problem with both IE6 and IE8. This is indeed a "certificate revoke" problem. Thanks

  Read the article

• 403.4 won't redirect in IE7

  - by Jeremy Morgan

  I have a secured folder that requires SSL. I have set it up in IIS(6) to require SSL. We don't want the visitors to be greeted with the "must be secure connection" error, so I have modified the 403.4 error page to contain the following: function redirectToHttps() { var httpURL = window.location.hostname+window.location.pathname; var httpsURL = "https://" + httpURL ; window.location = httpsURL ; } redirectToHttps(); And this solution works great for every browser, but IE7. On any other browser, if you type in http://www.mysite.com/securedfolder it will automatically redirect you to https://www.mysite.com/securedfolder with no message or anything (the intended action). But in Internet Explorer 7 ONLY it will bring up a page that says The website declined to show this webpage Most Likely Causes: This website requires you to log in This is something we don't want of course. I have verified that javascript is enabled, and the security settings have no effect, even when I set them to the lowest level I get the same error. I'm wondering, has anyone else seen this before?

  Read the article

• How to change libcurl SSL backend from gnutls to openssl on Ubuntu server

  - by Jayesh

  I am getting gnutls specific errors in my Tornado webserver while processing Google OpenID SSL responses. One of the suggestions I got from Tornado mailing list is to try OpenSSL backend instead of gnutls. But it doesn't seem to be straightforward on Ubuntu server (11.10). On Ubuntu server, gnutls is provided by libcurl3-gnutls package and openssl curl support is provided by libcurl4-openssl-dev package. (I don't know why the later is named 4 and dev, but I couldn't find any other openssl+curl package in apt-cache search). I had libcurl3-gnutls installed by default, but not libcurl4-openssl-dev. So I installed the later and restarted Torando instances. But that didn't seem to work. I still got same gnutls errors. I found old discussions on curl mailing lists regarding the problems of supporting different SSL backends to libcurl, but didn't find exactly how is it done today. So far my guess is openssl is built into libcurl and gnutls is provided through separate package (that will explain why there is no libcurl3-openssl). But how do I make libcurl to pick up openssl backend and not gnutls? Is there some option in libcurl/pycurl API to do this? I tried uninstalling libcurl3-gnutls, but apt-get prompted that it will also remove python-pycurl along with it. So that won't do.

  Read the article

• InstantSSL's certificate no different than a self signed certificate under Nginx with an IP accessed address

  - by Absolute0

  I ordered an ssl certificate from InstantSSL and got the following pair of files: my_ip.ca-bundle, my_ip.crt I also previously generated my own key and crt files using openssl. I concatenated all the crt files: cat my_previously_generted.crt my_ip.ca_bundle my_ip.crt chained.crt And configured nginx as follows: server { ... listen 443; ssl on; ssl_certificate /home/dmsf/csr/chained.crt; ssl_certificate_key /home/dmsf/csr/csr.nopass.key; ... } I don't have a domain name as per the clients request. When I open the browser with https://my_ip chrome gives me this error: The site's security certificate is not trusted! You attempted to reach my_ip, but the server presented a certificate issued by an entity that is not trusted by your computer's operating system. This may mean that the server has generated its own security credentials, which Google Chrome cannot rely on for identity information, or an attacker may be trying to intercept your communications. You should not proceed, especially if you have never seen this warning before for this site.

  Read the article

• Is this a solution for having multiple SSL certificates on the same IP

  - by Saif Bechan

  I am running CentOS running on a VPS. I read some guides on having multiple SSL certificates on the same system, but I can not get the basics to work. The guide I got that makes the most sense to me is the doing the following. In CentOS I can make virtual NIC's. So I made 2 virtual NIC's to start with. 192.168.10.1, 192.168.10.2. Now I work in ISP manager Pro, so this is listening on my primary ip 1.1.1.1 For each website I have them listening on 192.168.10.1:80, 192.168.10.1:443 In the hosts file I made the following 2 entries 192.168.10.1 1st.com 192.168.10.2 2nd.com Now the strange thing is that when I browser to 1st.com I do not get the website located at 192.168.10.1, I get the website located at my prim IP 1.1.1.1 Should I do something like forwarding or routing for this setup to work? And the basic question: Will this setup even work? Are the SSL certificates based on the IP adress, or are the based on the host name, 1st.com and 2nd.com.

  Read the article

• SSL timeout on some sites, across all browsers, on Mac OS X Snow Leopard

  - by dansays

  For the past several weeks, I've been receiving "Error 7 (net::ERR_TIMED_OUT): The operation timed out" when I attempt to connect to either Twitter or Paypal via SSL. I get this specific error in Google Chrome, but the same problem occurs in both Safari and Firefox. Other sites work fine, and other computers on my network can access these two sites. I have no firewall settings that would prevent me from accessing these sites over port 443. I notice that both Twitter and Paypal both have "Verisign Class 3 Extended Validation SSL CA" certificates. It is unclear whether this is related to the problem. In an effort to troubleshoot, I attempted to open the test sites referenced on Verisign's root certificate support page, which worked fine. Just to be sure, I downloaded and installed the root package file and installed all included Verisign certificates. No joy. I feel like I've hit a dead end. Any ideas? Update the first: I also cannot connect to FedEx.com, who also has a Verisign Class 3 Extended Validation cert. Update the second: Aaaaaaand it fixed itself. I did nothing. Or, I did something that worked, but in a delayed fashion. Frustrating, but a win is a win. I'll take it.

  Read the article

• Local SSL connections are causing redirect loop (after Ubuntu update)

  - by codeinthehole

  Following a recent Ubuntu update, my local websites are no longer serving their pages over SSL. For example, my .htaccess file attempts to ensure /sign-in is always served over HTTPS: RewriteEngine On RewriteCond %{HTTPS} off RewriteCond %{REQUEST_URI} /sign-in RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI} [L,QSA,R=301] However when I make a request to /sign-in on the domain site2-local , I get the error "The page isn't redirecting properly" with the following in /var/log/apache2/error.log [Tue Jun 08 12:20:57 2010] [info] [client 127.0.1.1] Connection to child 0 established (server site1-local:443) [Tue Jun 08 12:20:57 2010] [info] Seeding PRNG with 656 bytes of entropy [Tue Jun 08 12:20:57 2010] [info] Initial (No.1) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:20:57 2010] [info] Subsequent (No.2) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:20:57 2010] [info] Subsequent (No.3) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:20:57 2010] [info] Subsequent (No.4) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:20:57 2010] [info] Subsequent (No.5) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:20:57 2010] [info] Subsequent (No.6) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:20:57 2010] [info] Subsequent (No.7) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:20:57 2010] [info] Subsequent (No.8) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:20:57 2010] [info] Subsequent (No.9) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:20:57 2010] [info] Subsequent (No.10) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:21:12 2010] [info] [client 127.0.1.1] (70007)The timeout specified has expired: SSL input filter read failed. [Tue Jun 08 12:21:12 2010] [info] [client 127.0.1.1] Connection closed to child 0 with standard shutdown (server site2-local:443) There is a connection to site1-local (another site on my machine which shares the certificate), which I don't understand. Anyone know what is causing this issue?

  Read the article

• "no MPM loaded", but I'm not even using mpm

  - by ezuk

  Running Apache2 on Ubuntu Precise64 in Vagrant. When I try to start it, it says: vagrant@precise64:/etc/apache2$ /etc/init.d/apache2 start * Starting web server apache2 * * The apache2 configtest failed. Output of config test was: AH00534: apache2: Configuration error: No MPM loaded. Action 'configtest' failed. The Apache error log may have more information. But the thing is, my /etc/apache2/apache2.conf file doesn't call for MPM anywhere! I would paste it here but it would make for a huge post... I tried looking up the error log, but I can't find that anywhere, either. Help?

  Read the article

• Oops, no RSA or DSA server certificate found for 'server.host.name:0'?

  - by Scott Warren

  I'm setting up a new web server that hosts a dozen virtual hosts on Ubuntu 12.4 using Apache 2.2.22 with one config file per site. I created all the configuration files all at once and ran a2ensite * to enable them all at once. When I reloaded the configuration it failed and after restarting apache I found the following error message in my error.log: Oops, no RSA or DSA server certificate found for 'server.host.name:0'?! Most of the results for this error message are years old that don't fix the problem or are bugs that have been fixed https://issues.apache.org/bugzilla/show_bug.cgi?id=31709

  Read the article

• HTTP SSL VPN Client? (alternative to Cisco's AnyConnect VPN)

  - by Ian Boyd

  Is there any free HTTP SSL VPN clients around, one that can act as an alternative to Cisco's own HTTP SSL VPN client (called AnyConnect)? The Cisco AnyConnect client has acknowledged problems, with no forthcoming solutions. Which is why I'm hoping for an alternative. Note: I'm only talking about the HTTP SSL VPN Client, not the HTTP SSL VPN Server. (If it were up to me they wouldn't be using Cisco at all, but it's not up to me.) Note: OpenVPN is a client that talks to their servers once you sign up for their service. It's not a generic VPN client. Note: ShrewSoft VPN is a client that uses IPsec and pre-shared keys, and was a good replacement for Cisco's old client - but not the new AnyConnect SSL VPN client. Note: Windows 7's VPN client fails to negotiate when presented with an SSL VPN connection. Note: I am looking for Windows clients only.

  Read the article

• Stopping an specify Apache instance

  - by user1435991

  I have two Apache instances setup in my server (Solaris 10): Instance 1: /etc/apache2 Instance 2: /etc/apache2-instance2 To start the instance 1, I execute the following command: /usr/apache2/bin/apachectl -f /etc/apache2/httpd.conf And instance 2: /usr/apache2/bin/apachectl -f /etc/apache2-instance2/httpd.conf Both instances run perfectly, however the problem comes when I want to stop the instances. I have not been able to find a parameter to indicate what instance I want to stop. if I execute this command: /usr/apache2/bin/apachectl -k stop It will stop always the Instance 1 (the default one). The only solution that I could find to stop the instance 2 was to do this: kill -TERM 'cat /var/run/apache2-instance2/httpd.pid' Is this the only way to do it? or what is the best solution? I remember that I did something similar in Ubuntu setting a the global variable APACHE_CONFDIR before calling apachectl

  Read the article

• The proxy server received an invalid response from an upstream server

  - by chandank

  I have tomcat server behind the apache. I am using mod_ssl and reverse proxy to the tomcat. All are running at default ports. The full error is as follow. ack Proxy Error The proxy server received an invalid response from an upstream server. The proxy server could not handle the request POST /pages/doeditpage.action. Reason: Error reading from remote server If I clean the browser cache the error goes away and comes back after few attempts. I test the same on Chrome/Firefox/IE on Windows platform. Wondering it works perfectly on Linux based Chrome/Firefox. I googled a lot there are few answers at stack overflow but I am not able to find my answer. Is this a server side problem? because so many browsers cant be wrong at same time on Windows.

  Read the article

• Plesk + Apache + PHP (FastCGI): Constant session permissions problems, conflicts between HTTP / HTTPS

  - by Hans Engel

  I've just moved a collection of sites over to a brand-new server, running Apache 2.2.3, PHP 5.3, and Plesk 10.1.1. I am having problems with file permissions on PHP sessions, which are being stored in /var/lib/php/session. I originally set the permissions like so for this folder: drwxrwx--- 2 apache psacln 8192 Mar 22 23:25 session This worked fine, for HTTP sessions. Files were being saved in that folder with these permissions: -rw------- 1 client1 psacln 0 Mar 22 23:24 sess_507... -rw------- 1 client2 psacln 0 Mar 22 23:25 sess_8o1... The problem, however, is that PHP scripts accessed via HTTPS do not seem to be run by the same client1 or client2 user. I deleted files in the session directory and accessed a login page via HTTPS to see how sessions were being saved when initiated via this protocol: -rw------- 1 apache apache 0 Mar 22 23:25 sess_507... So, for whatever reason, sessions initiated by clients browsing with HTTPS were being saved by apache:apache, while sessions from HTTP clients were saved with someclient:psacln. What I'd like to ask: How can I avoid this problem with session permissions? When sessions are created via unencrypted HTTP and a client visits an HTTPS portion of the site, permission errors are shown, since apache:apache tries to access the session save created by someclient:psacln. The converse is also true. Can I change the user which runs the Apache HTTPS server, via Plesk or the command line? If not, can I have PHP sessions save with rw-rw---- permissions, and then add apache to the psacln group? Any other suggestions on how to fix this issue?

  Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >