Search Results

Search found 804 results on 33 pages for 'dylan wan'.

Page 31/33 | < Previous Page | 27 28 29 30 31 32 33  | Next Page >

• DNS NS and domain clarification

  - by thejartender

  I am really trying to get my home web server up and I don't seem to be succeeding. My web server withing my host system is running my web application and is viewable at the current isp ip 88.89.190.171 over WAN indicating that the webapp is fine and that router ports are forwarded. I have set up a DNS on this system with a single name server in the network and I manage to ping it with ping ns.thejarbar.org I have registered this private name server at my current hosting provider. My domain (thejarbar.org) is obviously registered and I have pointed it to my name server. My question here is if it is simply a matter of waiting on propagation for me to be able to ping my domain? Another way of asking this is if the fact that my name server is discoverable indicates that I have set it up correctly to be used? I have tested with dig and dig -x on my host and have A records for the name server. The server is not the Authorative server so I am concerned that this may be the reason why my site is not discoverable. Is there anything else I may need to so still? I only have one ns. currently, but should this succeed I will be purchasing a more stable secondary system to host my development applications. This is my best chance at getting work (freelance development) due to illness) and this I feel is the last step I need to succeed. Please note that this is temporarily a home server and I will most likely be using it as part of a professional setup very soon I will likely have to repeat this question therefore in a prefessional context in a few weeks as nothing will be different other than the fact that I am going to have a server running elsewhere. I am using bind9 and Ubuntu 12.10 and my records are: $TTL 3D @ IN SOA ns.thejarbar.org. email. ( 13112012 28800 3600 604800 38400 ); thejarbar.org. IN A 10.0.0.42 @ IN NS ns.thejarbar,org. yuccalaptop IN A 10.0.0.19 ns IN A 10.0.0.42 gw IN A 10.0.0.138 www IN CNAME thejarbar.org. $TTL 3D 0.0.10.in-addr.arpa. IN SOA ns.thejarbar.org. email. ( 13112012 28800 3600 604800 38400 ); 0.0.10.in-addr.arpa. IN NS ns.thejarbar.org. 42 IN PTR thejarbar.org. 19 IN PTR yuccalaptop.thejarbar.org. 138 IN PTR gw.thejarbar.org. My localhost IP is 10.0.0.42 I wish for this to be my host and name server.

  Read the article

• FTP not listing files behind firewall (setsockopt (ignored): Permission denied)

  - by KennyDs

  We are developing a Magento application that has a module that works with FTP. Today we deployed this on the testing environment which is setup in the following way: Gateway server which has the following iptables rules: # iptables -L -n -v Chain INPUT (policy ACCEPT 2 packets, 130 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 165 13720 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED Chain FORWARD (policy ACCEPT 7 packets, 606 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- eth1 eth0 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 15 965 ACCEPT all -- eth0 eth1 0.0.0.0/0 0.0.0.0/0 0 0 REJECT all -- eth1 eth1 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT 126 packets, 31690 bytes) pkts bytes target prot opt in out source destination These are set at runtime via the following bash script: #!/bin/sh PATH=/usr/sbin:/sbin:/bin:/usr/bin # # delete all existing rules. # iptables -F iptables -t nat -F iptables -t mangle -F iptables -X # Always accept loopback traffic iptables -A INPUT -i lo -j ACCEPT # Allow established connections, and those not coming from the outside iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth1 -o eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow outgoing connections from the LAN side. iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT # Masquerade. iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE # Don't forward from the outside to the inside. iptables -A FORWARD -i eth1 -o eth1 -j REJECT # Enable routing. echo 1 > /proc/sys/net/ipv4/ip_forward The gateway server is connected to the WAN via eth1 and is connected to the internal network via eth0. One of the servers from eth1 has the following problem when trying to list files over ftp: $ ftp -vd myftpserver.com Connected to myftpserver.com 220 Welcome to MY FTP Server ftp: setsockopt: Bad file descriptor Name (myftpserver.com:magento): XXXXXXXX ---> USER XXXXXXXX 331 User XXXXXXXX, password please Password: ---> PASS XXXX 230 Password Ok, User logged in ---> SYST 215 UNIX Type: L8 Remote system type is UNIX. Using binary mode to transfer files. ftp> ls ftp: setsockopt (ignored): Permission denied ---> PORT 192,168,19,15,135,75 421 Service not available, remote server has closed connection When I try listing the files in passive mode, same result. When I run the same command on the gateway server, everything works fine so I believe that the issue is happening because of the iptables rules not forwarding properly. Does anyone have an idea which rule I need to add to make this work?

  Read the article

• What the best way to achieve RPO of zero and lowest possible RTO (less than 15 minutes) with SQL 2008 R2?

  - by Adrian Hope-Bailie

  We are running a payments (EFT transaction processing) application which is processing high volumes of transactions 24/7 and are currently investigating a better way of doing DB replication to our disaster recovery site. Our current and previous strategies have included using both DoubleTake and Redgate to replicate data to a warm stand-by. DoubleTake is the supported solution from the payments software vendor however their (DoubleTake's) support in South Africa is very poor. We had a few issues and simply couldn't ever resolve them so we had to give up on DoubleTake. We have been using Redgate to manually read the data from the primary site (via queries) and write to the DR site but this is: A bad solution Getting the software vendor hot and bothered whenever we have support issues as it has a tendency to interfere with the payment application which is very DB intensive. We recently upgraded the whole system to run on SQL 2008 R2 Enterprise which means we should probably be looking at using some of the built-in replication features. The server has 2 fairly large databases with a mixture of tables containing highly volatile transactional data and pretty static configuration data. Replication would be done over a WAN link to a separate physical site and needs to achieve the following objectives. RPO: Zero loss - This is transactional data with financial impact so we can't lose anything. RTO: Tending to zero - The business depends on our ability to process transactions every minute we are down we are losing money I have looked at a few of the other questions/answers but none meet our case exactly: SQL Server 2008 failover strategy - Log shipping or replication? How to achieve the following RTO & RPO with logshipping only using SQL Server? What is the best of two approaches to achieve DB Replication? My current thinking is that we should use mirroring but I am concerned that for RPO:0 we will need to do delayed commits and this could impact the performance of the primary DB which is not an option. Our current DR process is to: Stop incoming traffic to the primary site and allow all in-flight transaction to complete. Allow the replication to DR to complete. Change network routing to route to DR site. Start all applications and services on the secondary site (Ideally we can change this to a warmer stand-by whereby the applications are already running but not processing any transactions). In other words the DR database needs to, as quickly as possible, catch up with primary and be ready for processing as the new primary. We would then need to be able to reverse this when we are ready to switch back. Is there a better option than mirroring (should we be doing log-shipping too) and can anyone suggest other considerations that we should keep in mind?

  Read the article

• Routing between 2 different subnets on 2 different interfaces in SonicOS

  - by Chris1499

  I'm having a bit of a problem allowing traffic between two of my subnets. Here's the structure I've built. The X0 interface has our windows server on it and it handles DHCP/DNS, etc. X1 has the WAN connection. The Sonicwall is handling DHCP on X2. The X3 interface is connected to a different vlan on the 48 port switch. The Sonicwall is handling DHCP on this network as well. So here's what i want to do. The network on X2 is for our guest wireless; i don't want it to be able to access any of the other networks, just the internet, so i that all blocked in the firewall. No issues there. The X3 network is going to be for programmable controllers, and needs to be able to access the X0 network where our computers are. This is where my problem is. I'm not able to get between the 192.168.2.xxx and the 192.168.1.xxx on interfaces X0 and X3 respectively. I have these rules set up in the firewall. The Lan Primary Subnet is the 192.168.2.0 on X0. So if i'm not mistaken, this will allow traffic between the two through the firewall. Now this is where I'm a little confused. Do i need to use NAT to get the traffic from X0 to go to X3 (and vice versa), or a static route, or both? Currently i have both, though i doubt they're done correctly (also in screenshot). I've tried to ping between the two without luck. Any advice, or if you see what's wrong with my setup, is much appreciated. If you need some more information, let me know. Thanks all! EDIT: So i found that i don't neither either NAT or a static route, that the setting in the firewall is enough. I can now ping from the 192.168.1.xxx network, however i can't access the server on the 192.168.2.xxx network. When i try to access i get "An error occured while reconnecting to Z: to server Microsoft Windows Network: The local device name is already in use. This connection has not been restored. What am i missing?

  Read the article

• What router hardware or software should be used when multiple public IPs are routed into the same LAN?

  - by lcbrevard

  I am looking for recommendations to replace a set of consumer grade (Linksys, Netgear, Belkin) routers with something that can handle more traffic while routing more than one static public IP into the same LAN address space. We have a block of static public IPs, 5 usable, with Comcast Business. Currently four of them are in use for: General office access Web server Mail and DNS servers Download and backup web server for separate business All systems (a mixture of physical and virtual) are in the same LAN address space (10.x.y.0/24) to enable easy access between them inside the office. There are 30 or more systems in use depending on which virtual machines are currently active. We have a mixture of Windows, Linux, FreeBSD, and Solaris. Currently a separate consumer grade router is used for each of the four static addresses, with its WAN address set to the specific static address and a different gateway address for each: uses 10.x.y.1 - various ports are forwarded to various LAN IPs on systems with gateway 10.x.y.1 uses 10.x.y.254 - port 80 is forwarded to a server with gateway 10.x.y.254 uses 10.x.y.253 - ports for mail and dns are forwarded to a server with gateway 10.x.y.253 uses 10.x.y.252 - ports as needed are forwarded to server with gateway 10.x.y.252 Only router 1. is allowed to serve DHCP and address reservation based on the MAC is used for most of the internal "server" IP addresses so they are at fixed values. [Some are set static due to limitations in the address reservation capabilities of router 1.] And, yes, this really does work! But... I am looking for: better DHCP with more capable address reservation higher capacity so I don't have to periodically power cycle the routers One obvious improvement would be to have a real DHCP server and not use a consumer grade router for that purpose. I am torn between buying a "professional" router such as Cisco or Juniper or Sonic Wall verus learning to configure some spare hardware to perform this function. The price goes up extremely rapidly with capabilities for commercial routers! Worse, some routers require licensing based on the number of clients - a disaster in our environment with so many virtual machines. Sorry for such a long posting but I am getting tired of having to power cycle routers and deal with shifting IP addresses afterwards!

  Read the article

• Is there a way to replicate a very large file shares in real-time?

  - by fsckin

  I have an hourly cron job that copies about 40GB of data from a source folder into a new folder with the hour appended on the end. When it's done, the job prunes anything older than 24 hours. This data changes very often during work hours and is on a samba file share. Here's how the folder structure looks: \server\Version.1 \server\Version.2 \server\Version.3 ... \server\Version.24 The contents of each new folder compared to the last one usually doesn't change very much, since this is a hourly job. Now you might be thinking that I'm an idiot for setting dreaming this up. Truth is, I just found out. It's actually been used for years and is so incredibly simple, anyone could delete the ENTIRE 40GB share (imagine that dialog spooling up... deleting thousands and thousands of files) and it would actually be faster to restore by moving the latest copy back to the source than it took to delete. Brilliant! Now to top this off, I need to efficiently replicate this 960GB of "mostly similar" data to a remote server over WAN link, with the replication happening as close to real-time as possible -- think hot spare, disaster recovery, etc. My first thought was rsync. Total failure. Rsync sees it sees a deletion of the folder that is 24 hours old and the addition of a new folder with 30GB of data to sync! I also looked at rdiff-backup and unison, they both appear to use similar algorithms and do not keep enough meta-data to do this intelligently. Best thing that I can find "out of the box" to do this is Windows Server "Distributed Filesystem Replication" which uses "Remote Differential Compression" -- After reading the background information on how this works, it actually looks like exactly what I need. Problem: Both servers are running Linux. D'oh! One approach to this I'm looking at is this, say it's 5AM and the cron job finishes: New Version.5 folder arrives at on local server SSH to remote server and copy Version.4 to Version.5 Run rsync on the local server pushing changes to the remote server. Rsync finally knows to do a differential copy between Version.4 and Version.5 Is there a smarter way to replicate Samba shares as close to real-time as possible? Anything out there that does "Remote Differential Compression" on Linux?

  Read the article

• Find only physical network adapters with WMI Win32_NetworkAdapter class

  - by Mladen Prajdic

  WMI is Windows Management Instrumentation infrastructure for managing data and machines. We can access it by using WQL (WMI querying language or SQL for WMI). One thing to remember from the WQL link is that it doesn't support ORDER BY. This means that when you do SELECT * FROM wmiObject, the returned order of the objects is not guaranteed. It can return adapters in different order based on logged-in user, permissions of that user, etc… This is not documented anywhere that I've looked and is derived just from my observations. To get network adapters we have to query the Win32_NetworkAdapter class. This returns us all network adapters that windows detect, real and virtual ones, however it only supplies IPv4 data. I've tried various methods of combining properties that are common on all systems since Windows XP. The first thing to do to remove all virtual adapters (like tunneling, WAN miniports, etc…) created by Microsoft. We do this by adding WHERE Manufacturer!='Microsoft' to our WMI query. This greatly narrows the number of adapters we have to work with. Just on my machine it went from 20 adapters to 5. What was left were one real physical Realtek LAN adapter, 2 virtual adapters installed by VMware and 2 virtual adapters installed by VirtualBox. If you read the Win32_NetworkAdapter help page you'd notice that there's an AdapterType that enumerates various adapter types like LAN or Wireless and AdapterTypeID that gives you the same information as AdapterType only in integer form. The dirty little secret is that these 2 properties don't work. They are both hardcoded, AdapterTypeID to "0" and AdapterType to "Ethernet 802.3". The only exceptions I've seen so far are adapters that have no values at all for the two properties, "RAS Async Adapter" that has values of AdapterType = "Wide Area Network" and AdapterTypeID = "3" and various tunneling adapters that have values of AdapterType = "Tunnel" and AdapterTypeID = "15". In the help docs there isn't even a value for 15. So this property was of no help. Next property to give hope is NetConnectionId. This is the name of the network connection as it appears in the Control Panel -> Network Connections. Problem is this value is also localized into various languages and can have different names for different connection. So both of these properties don't help and we haven't even started talking about eliminating virtual adapters. Same as the previous one this property was also of no help. Next two properties I checked were ConfigManagerErrorCode and NetConnectionStatus in hopes of finding disabled and disconnected adapters. If an adapter is enabled but disconnected the ConfigManagerErrorCode = 0 with different NetConnectionStatus. If the adapter is disabled it reports ConfigManagerErrorCode = 22. This looked like a win by using (ConfigManagerErrorCode=0 or ConfigManagerErrorCode=22) in our condition. This way we get enabled (connected and disconnected adapters). Problem with all of the above properties is that none of them filter out the virtual adapters installed by virtualization software like VMware and VirtualBox. The last property to give hope is PNPDeviceID. There's an interesting observation about physical and virtual adapters with this property. Every virtual adapter PNPDeviceID starts with "ROOT\". Even VMware and VirtualBox ones. There were some really, really old physical adapters that had PNPDeviceID starting with "ROOT\" but those were in pre win XP era AFAIK. Since my minimum system to check was Windows XP SP2 I didn't have to worry about those. The only virtual adapter I've seen to not have PNPDeviceID start with "ROOT\" is the RAS Async Adapter for Wide Area Network. But because it is made by Microsoft we've eliminated it with the first condition for the manufacturer. Using the PNPDeviceID has so far proven to be really effective and I've tested it on over 20 different computers of various configurations from Windows XP laptops with wireless and bluetooth cards to virtualized Windows 2008 R2 servers. So far it always worked as expected. I will appreciate you letting me know if you find a configuration where it doesn't work. Let's see some C# code how to do this: ManagementObjectSearcher mos = null;// WHERE Manufacturer!='Microsoft' removes all of the // Microsoft provided virtual adapters like tunneling, miniports, and Wide Area Network adapters.mos = new ManagementObjectSearcher(@"SELECT * FROM Win32_NetworkAdapter WHERE Manufacturer != 'Microsoft'");// Trying the ConfigManagerErrorCode and NetConnectionStatus variations // proved to still not be enough and it returns adapters installed by // the virtualization software like VMWare and VirtualBox// ConfigManagerErrorCode = 0 -> Device is working properly. This covers enabled and/or disconnected devices// ConfigManagerErrorCode = 22 AND NetConnectionStatus = 0 -> Device is disabled and Disconnected. // Some virtual devices report ConfigManagerErrorCode = 22 (disabled) and some other NetConnectionStatus than 0mos = new ManagementObjectSearcher(@"SELECT * FROM Win32_NetworkAdapter WHERE Manufacturer != 'Microsoft' AND (ConfigManagerErrorCode = 0 OR (ConfigManagerErrorCode = 22 AND NetConnectionStatus = 0))");// Final solution with filtering on the Manufacturer and PNPDeviceID not starting with "ROOT\"// Physical devices have PNPDeviceID starting with "PCI\" or something else besides "ROOT\"mos = new ManagementObjectSearcher(@"SELECT * FROM Win32_NetworkAdapter WHERE Manufacturer != 'Microsoft' AND NOT PNPDeviceID LIKE 'ROOT\\%'");// Get the physical adapters and sort them by their index. // This is needed because they're not sorted by defaultIList<ManagementObject> managementObjectList = mos.Get() .Cast<ManagementObject>() .OrderBy(p => Convert.ToUInt32(p.Properties["Index"].Value)) .ToList();// Let's just show all the properties for all physical adapters.foreach (ManagementObject mo in managementObjectList){ foreach (PropertyData pd in mo.Properties) Console.WriteLine(pd.Name + ": " + (pd.Value ?? "N/A"));}   That's it. Hope this helps you in some way.

  Read the article

• Integrating Windows Form Click Once Application into SharePoint 2007 &ndash; Part 2 of 4

  - by Kelly Jones

  In my last post, I explained why we decided to use a Click Once application to solve our business problem. To quickly review, we needed a way for our business users to upload documents to a SharePoint 2007 document library in mass, set the meta data, set the permissions per document, and to do so easily. Let’s look at the pieces that make up our solution.  First, we have the Windows Form application.  This app is deployed using Click Once and calls SharePoint web services in order to upload files and then calls web services to set the meta data (SharePoint columns and permissions).  Second, we have a custom action.  The custom action is responsible for providing our users a link that will launch the Windows app, as well as passing values to it via the query string.  And lastly, we have the web services that the Windows Form application calls.  For our solution, we used both out of the box web services and a custom web service in order to set the column values in the document library as well as the permissions on the documents. Now, let’s look at the technical details of each of these pieces.  (All of the code is downloadable from here: )   Windows Form application deployed via Click Once The Windows Form application, called “Custom Upload”, has just a few classes in it: Custom Upload -- the form FileList.xsd -- the dataset used to track the names of the files and their meta data values SharePointUpload -- this class handles uploading the file SharePointUpload uses an HttpWebRequest to transfer the file to the web server. We had to change this code from a WebClient object to the HttpWebRequest object, because we needed to be able to set the time out value.  public bool UploadDocument(string localFilename, string remoteFilename) { bool result = true; //Need to use an HttpWebRequest object instead of a WebClient object // so we can set the timeout (WebClient doesn't allow you to set the timeout!) HttpWebRequest req = (HttpWebRequest)WebRequest.Create(remoteFilename); try { req.Method = "PUT"; req.Timeout = 60 * 1000; //convert seconds to milliseconds req.AllowWriteStreamBuffering = true; req.Credentials = System.Net.CredentialCache.DefaultCredentials; req.SendChunked = false; req.KeepAlive = true; Stream reqStream = req.GetRequestStream(); FileStream rdr = new FileStream(localFilename, FileMode.Open, FileAccess.Read); byte[] inData = new byte[4096]; int bytesRead = rdr.Read(inData, 0, inData.Length); while (bytesRead > 0) { reqStream.Write(inData, 0, bytesRead); bytesRead = rdr.Read(inData, 0, inData.Length); } reqStream.Close(); rdr.Close(); System.Net.HttpWebResponse response = (HttpWebResponse)req.GetResponse(); if (response.StatusCode != HttpStatusCode.OK && response.StatusCode != HttpStatusCode.Created) { String msg = String.Format("An error occurred while uploading this file: {0}\n\nError response code: {1}", System.IO.Path.GetFileName(localFilename), response.StatusCode.ToString()); LogWarning(msg, "2ACFFCCA-59BA-40c8-A9AB-05FA3331D223"); result = false; } } catch (Exception ex) { LogException(ex, "{E9D62A93-D298-470d-A6BA-19AAB237978A}"); result = false; } return result; } The class also contains the LogException() and LogWarning() methods. When the application is launched, it parses the query string for some initial values.  The query string looks like this: string queryString = "Srv=clickonce&Sec=N&Doc=DMI&SiteName=&Speed=128000&Max=50"; This Srv is the path to the server (my Virtual Machine is name “clickonce”), the Sec is short for security – meaning HTTPS or HTTP, the Doc is the shortcut for which document library to use, and SiteName is the name of the SharePoint site.  Speed is used to calculate an estimate for download speed for each file.  We added this so our users uploading documents would realize how long it might take for clients in remote locations (using slow WAN connections) to download the documents. The last value, Max, is the maximum size that the SharePoint site will allow documents to be.  This allowed us to give users a warning that a file is too large before we even attempt to upload it. Another critical piece is the meta data collection.  We organized our site using SharePoint content types, so when the app loads, it gets a list of the document library’s content types.  The user then select one of the content types from the drop down list, and then we query SharePoint to get a list of the fields that make up that content type.  We used both an out of the box web service, and one that we custom built, in order to get these values. Once we have the content type fields, we then add controls to the form.  Which type of control we add depends on the data type of the field.  (DateTime pickers for date/time fields, etc)  We didn’t write code to cover every data type, since we were working with a limited set of content types and field data types. Here’s a screen shot of the Form, before and after someone has selected the content types and our code has added the custom controls:     The other piece of meta data we collect is the in the upper right corner of the app, “Users with access”.  This box lists the different SharePoint Groups that we have set up and by checking the boxes, the user can set the permissions on the uploaded documents. All of this meta data is collected and submitted to our custom web service, which then sets the values on the documents on the list.  We’ll look at these web services in a future post. In the next post, we’ll walk through the Custom Action we built.

  Read the article

• The first day of JavaOne is already over!

  - by delabassee

  In the past Sunday used to be a more relaxing day with ‘just’ some JavaOne activities going on. Sunday used to be a soft day to prepare yourself for an exhausting week. This is now over as JavaOne is expanding; Sunday is now an integral part of the conference. One of the side effect of this extra day is that some activities related to JavaOne and OpenWorld such as MySQL Connect are being push to start a day earlier on Saturday (can you spot the pattern here?). On the GlassFish front, Sunday was a very busy day! It started at the Moscone Center with the annual GlassFish Community Event where the Java EE 7 and GF 4 roadmaps were presented and discussed. During the event, different GlassFish users such as ZeroTurnaround (the JRebel guys), Grupo RBS and IDR Solutions shared their views on GF, why they like GF but also what could be improved. The event was also a forum for the GF community to exchange with some of the key Java EE / GlassFish Oracle Executives and the different GF team members. The Strategy keynote and the Technical keynote were held in the Masonic Auditorium later in the after-noon. Oracle executives have presented the plans for Java SE, Java FX and Java EE. As on-demand replays will be available soon, I will not summarize several hours of content but here are some personal takeaways from those keynotes. Modularity Modularity is a big deal. We know by now that Project Jigsaw will not be ready for Java SE 8 but in any case, it is already possible (and encouraged) to test Jigsaw today. In the future, Java EE plan to rely on the modularity features provided by Java SE, so Project Jigsaw is also relevant for Java EE developers. Shorter term, to cover some of the modular requirements, Java SE will adopt the approach that was used for Java EE 6 and the notion of Profiles. This approach does not define a module system per say; Profiles is a way to clearly define different subsets of Java SE to fulfill different needs (e.g. the full JRE is not required for a headless application). The introduction of different Profiles, from the Base profile (10mb) to the Full Profile (+50mb), has been proposed for Java SE 8. Embedded Embedded is a strong theme going forward for the Java Plaform. There is now a dedicated program : Java Embedded @ JavaOne Java by nature (e.g. platform independence, built-in security, ability easily talks to any back-end systems, large set of skills available on the market, etc.) is probably the most suited platform for the Internet of Things. You can quickly be up-to-speed and develop services and applications for that space just by using your current Java skills. All you need to start developing on ARM is a 35$ Raspberry Pi ARM board (25$ if you are cheap and can live without an ethernet connection) and the recently released JDK for Linux/ARM. Obviously, GlassFish runs on Raspberry Pi. If you wan to go further in the embedded space, you should take a look Java SE Embedded, an optimized, low footprint, Java environment that support the major embedded architectures (ARM, PPC and x86). Finally, Oracle has recently introduced Java Embedded Suite, a new solution that brings modern middleware capabilities to the embedded space. Java Embedded Suite is an optimized solution that leverage Java SE Embedded but also GlassFish, Jersey and JavaDB to deploy advanced value added capabilities (eg. sensor data filtering and) deeper in the network, closer to the devices. JavaFX JavaFX is going strong! Starting from Java SE 7u6, JavaFX is bundled with the JDK. JavaFX is now available for all the major desktop platforms (Windows, Linux and Mac OS X). JavaFX is now also available, in developer preview, for low end device running Linux/ARM. During the keynote, JavaFX was shown running on a Raspberry Pi! And as announced during the keynote, JavaFX should be fully open-sourced by the end of the year; contributions are welcome!. There is a strong momentum around JavaFX, it’s the ideal client solution for the Java platform. A client layer that works perfectly with GlassFish on the back-end. If you were not convince by JavaFX, it’s time to reconsider it! As an old Chinese proverb say “One tweet is worth a thousand words!” HTML5, Project Avatar and Java EE 7 HTML5 got a lot of airtime too, it was covered during the Java EE 7 section of the keynote. Some details about Project Avatar, Oracle’s incubator project for a TSA (Thin Server Architecture) solution, were diluted and shown during the keynote. On the tooling side, Project Easel running on NetBeans 7.3 beta was demo’ed, including a cool NetBeans debugging session running in Chrome! HTML 5, Project Avatar and Java EE 7 deserve separate posts... Feedback We need your feedback! There are many projects, JSRs and products cooking : GlassFish 4, Project Jigsaw, Concurrency Utilities for Java EE (JSR 236), OpenJFX, OpenJDK to name just a few. Those projects, those specifications will have a profound impact on the Java platform for the years to come! So if you have the opportunity, download, install, learn, tests them and give feedback! Remember, you can "Make the Future Java!" Finally, the traditional GlassFish Party at the Thirsty Bear concluded the first JavaOne day. This party is another place where the community can freely exchange with the GlassFish team in a more relaxed, more friendly (but sometime more noisy) atmosphere. Arun has posted a set of pictures to reflect the atmosphere of the keynotes and the GlassFish party. You can find more details on the others Java EE and GlassFish activities here.

  Read the article

• Computer Networks UNISA - Chap 8 &ndash; Wireless Networking

  - by MarkPearl

  After reading this section you should be able to Explain how nodes exchange wireless signals Identify potential obstacles to successful transmission and their repercussions, such as interference and reflection Understand WLAN architecture Specify the characteristics of popular WLAN transmission methods including 802.11 a/b/g/n Install and configure wireless access points and their clients Describe wireless MAN and WAN technologies, including 802.16 and satellite communications The Wireless Spectrum All wireless signals are carried through the air by electromagnetic waves. The wireless spectrum is a continuum of the electromagnetic waves used for data and voice communication. The wireless spectrum falls between 9KHZ and 300 GHZ. Characteristics of Wireless Transmission Antennas Each type of wireless service requires an antenna specifically designed for that service. The service’s specification determine the antenna’s power output, frequency, and radiation pattern. A directional antenna issues wireless signals along a single direction. An omnidirectional antenna issues and receives wireless signals with equal strength and clarity in all directions The geographical area that an antenna or wireless system can reach is known as its range Signal Propagation LOS (line of sight) uses the least amount of energy and results in the reception of the clearest possible signal. When there is an obstacle in the way, the signal may… pass through the object or be obsrobed by the object or may be subject to reflection, diffraction or scattering. Reflection – waves encounter an object and bounces off it. Diffraction – signal splits into secondary waves when it encounters an obstruction Scattering – is the diffusion or the reflection in multiple different directions of a signal Signal Degradation Fading occurs as a signal hits various objects. Because of fading, the strength of the signal that reaches the receiver is lower than the transmitted signal strength. The further a signal moves from its source, the weaker it gets (this is called attenuation) Signals are also affected by noise – the electromagnetic interference) Interference can distort and weaken a wireless signal in the same way that noise distorts and weakens a wired signal. Frequency Ranges Older wireless devices used the 2.4 GHZ band to send and receive signals. This had 11 communication channels that are unlicensed. Newer wireless devices can also use the 5 GHZ band which has 24 unlicensed bands Narrowband, Broadband, and Spread Spectrum Signals Narrowband – a transmitter concentrates the signal energy at a single frequency or in a very small range of frequencies Broadband – uses a relatively wide band of the wireless spectrum and offers higher throughputs than narrowband technologies The use of multiple frequencies to transmit a signal is known as spread-spectrum technology. In other words a signal never stays continuously within one frequency range during its transmission. One specific implementation of spread spectrum is FHSS (frequency hoping spread spectrum). Another type is known as DSS (direct sequence spread spectrum) Fixed vs. Mobile Each type of wireless communication falls into one of two categories Fixed – the location of the transmitted and receiver do not move (results in energy saved because weaker signal strength is possible with directional antennas) Mobile – the location can change WLAN (Wireless LAN) Architecture There are two main types of arrangements Adhoc – data is sent directly between devices – good for small local devices Infrastructure mode – a wireless access point is placed centrally, that all devices connect with 802.11 WLANs The most popular wireless standards used on contemporary LANs are those developed by IEEE’s 802.11 committee. Over the years several distinct standards related to wireless networking have been released. Four of the best known standards are also referred to as Wi-Fi. They are…. 802.11b 802.11a 802.11g 802.11n These four standards share many characteristics. i.e. All 4 use half duplex signalling Follow the same access method Access Method 802.11 standards specify the use of CSMA/CA (Carrier Sense Multiple Access with Collision Avoidance) to access a shared medium. Using CSMA/CA before a station begins to send data on an 802.11 network, it checks for existing wireless transmissions. If the source node detects no transmission activity on the network, it waits a brief period of time and then sends its transmission. If the source does detect activity, it waits a brief period of time before checking again. The destination node receives the transmission and, after verifying its accuracy, issues an acknowledgement (ACT) packet to the source. If the source receives the ACK it assumes the transmission was successful, – if it does not receive an ACK it assumes the transmission failed and sends it again. Association Two types of scanning… Active – station transmits a special frame, known as a prove, on all available channels within its frequency range. When an access point finds the probe frame, it issues a probe response. Passive – wireless station listens on all channels within its frequency range for a special signal, known as a beacon frame, issued from an access point – the beacon frame contains information necessary to connect to the point. Re-association occurs when a mobile user moves out of one access point’s range and into the range of another. Frames Read page 378 – 381 about frames and specific 802.11 protocols Bluetooth Networks Sony Ericson originally invented the Bluetooth technology in the early 1990s. In 1998 other manufacturers joined Ericsson in the Special Interest Group (SIG) whose aim was to refine and standardize the technology. Bluetooth was designed to be used on small networks composed of personal communications devices. It has become popular wireless technology for communicating among cellular telephones, phone headsets, etc. Wireless WANs and Internet Access Refer to pages 396 – 402 of the textbook for details.

  Read the article

• What's New in Oracle VM VirtualBox 4.2?

  - by Fat Bloke

  A year is a long time in the IT industry. Since the last VirtualBox feature release, which was a little over a year ago, we've seen: new releases of cool new operating systems, such as Windows 8, ChromeOS, and Mountain Lion; we've seen a myriad of new Linux releases from big Enterprise class distributions like Oracle 6.3, to accessible desktop distros like Ubuntu 12.04 and Fedora 17; and we've also seen the spec of a typical PC or laptop double in power. All of these events have influenced our new VirtualBox version which we're releasing today. Here's how... Powerful hosts  One of the trends we've seen is that as the average host platform becomes more powerful, our users are consistently running more and more vm's. Some of our users have large libraries of vm's of various vintages, whilst others have groups of vm's that are run together as an assembly of the various tiers in a multi-tiered software solution, for example, a database tier, middleware tier, and front-ends.  So we're pleased to unveil a more powerful VirtualBox Manager to address the needs of these users: VM Groups Groups allow you to organize your VM library in a sensible way, e.g.  by platform type, by project, by version, by whatever. To create groups you can drag one VM onto another or select one or more VM's and choose Machine...Group from the menu bar. You can expand and collapse groups to save screen real estate, and you can Enter and Leave a group (think iPad navigation here) by using the right and left arrow keys when groups are selected. But groups are more than passive folders, because you can now also perform operations on groups, rather than all the individual VMs. So if you have a multi-tiered solution you can start the whole stack up with just one click. Autostart Many VirtualBox users run dedicated services in their VMs, for example, running a Wiki. With these types of VM workloads, you really want the VM start up when the host machine boots up. So with 4.2 we've introduced a cross-platform Auto-start mechanism to allow you to treat VMs as host services. Headless VM Launching With VM's such as web servers, wikis, and other types of server-class workloads, the Console of the VM is pretty much redundant. For some time now VirtualBox has offered a separate launch mechanism for these VM's, namely the command-line interface commands VBoxHeadless or VBoxManage startvm ... --type headless commands. But with 4.2 we also allow you launch headless VMs from the Manager. Simply hold down Shift when launching the VM from the Manager.  It's that easy. But how do you stop a headless VM? Well, with 4.2 we allow you to Close the VM from the Manager. (BTW best to use the ACPI Shutdown method which allows the guest VM to close down gracefully.) Easy VM Creation For our expert users, the  New VM Wizard was a little tiresome, so now there's a faster 2-click VM creation mode. Just Hide the description when creating a new VM. Powerful VMs  As the hosts have become more powerful, so are the guests that are running inside them. Here are some of the 4.2 features to accommodate them: Virtual Network Interface Cards  With 4.2, it's now possible to create VMs with up to 36 NICs, when using the ICH9 chipset emulation. But with great power comes great responsibility (didn't Obi-Wan say something similar?), and so we have also introduced bandwidth limiting to prevent a rogue VM stealing the whole pipe. VLAN tagging Some of our users leverage VLANs extensively so we've enhanced the E1000 NICs to support this.  Processor Performance If you are running a CPU which supports Nested Paging (aka EPT in the Intel world) such as most of the Core i5 and i7 CPUs, or are running an AMD Bulldozer or later, you should see some performance improvements from our work with these processors. And while we're talking Processors, we've added support for some of the more modern VIA CPUs too. Powerful Automation Because VirtualBox runs atop a fully blown operating system, it makes sense to leverage the capabilities of the host to run scripts that can drive the guest VMs. Guest Automation was introduced in a prior release but with 4.2 we've revamped the APIs to allow a richer and more powerful set of operations to be executed by the guest. Check out the IGuest APIs in the VirtualBox Programming Guide and Reference (SDK). Powerful Platforms  All the hardcore engineering that has gone into 4.2 has been done for a purpose and that is to deliver a fast and powerful engine that can run almost any x86 OS because of the integrity of the virtualization. So we're pleased to add support for these platforms: Mac OS X "Mountain Lion"  Windows 8 Windows Server 2012 Ubuntu 12.04 (“Precise Pangolin”) Fedora 17 Oracle Linux 6.3  Here's the proof: We don't have time to go into the myriad of smaller improvements such as support for burning audio CDs from a guest, bi-directional clipboard control,  drag-and-drop of files into Linux guests, etc. so we'll leave that as an exercise for the user as soon as you've downloaded from the Oracle or community site and taken a peek at the User Guide. So all in all, a pretty solid release, one that we hope you'll enjoy discovering. - FB 

  Read the article

• W7 routing - traffic not going to default gateway

  - by Ian Macintosh

  I have a really strange Windows 7 IPv4 routing issue that I can't get to the bottom of. The summary of the issue is that the default gateway is set to 192.168.254.253, but that it is actually using a default gateway of 192.168.254.254. Here's a network diagram: .-,( ),-. .-( )-. .-----( internet )----.--------------------------. | '-( ).-' | | | '-.( ).-' | | v v v .------------. .------. .------. | 10mb Fibre | | ADSL | | ADSL | '------------' '------' '------' | | | | | | v v v .---------------------. .--------------------. .--------------------. | Juniper Box | | Draytek DSL Router | | Draytek DSL Router | |---------------------| |--------------------| |--------------------| | (public IP address) | | 172.16.0.x | | 172.16.0.x | '---------------------' '--------------------' '--------------------' | | | | | .-------------------' | v v v .-------------------------. .-----------------. | Draytek Dual WAN Router | | Untangle GW | |-------------------------| |-----------------| | 192.168.254.254 | | 192.168.254.253 | '-------------------------' '-----------------' | | | | | v v =================================== LAN =================================== | | | | v v .----------------. .----------------. | Windows 7 W/S | | Windows 7 W/S | |----------------| |----------------| | 192.168.254.38 | | 192.168.254.77 | '----------------' '----------------' This is a recently (a few weeks ago) converted fibre site with the original 2 DSL lines still attached and running. An Untangle (firewall) was installed with the fibre line. Here is the affected PC network configuration: C:\>ipconfig /allcompartments /all Windows IP Configuration ============================================================================== Network Information for Compartment 1 (ACTIVE) ============================================================================== Host Name . . . . . . . . . . . . : COMP36 Primary Dns Suffix . . . . . . . : XXXXXX.local Node Type . . . . . . . . . . . . : Broadcast IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : XXXXXX.local Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : XXXXXX.local Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller #2 Physical Address. . . . . . . . . : C8-9C-DC-33-F1-65 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::3925:86a5:7066:ab92%15(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.254.38(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 22 August 2012 10:20:32 Lease Expires . . . . . . . . . . : 30 August 2012 10:20:31 Default Gateway . . . . . . . . . : 192.168.254.253 DHCP Server . . . . . . . . . . . : 192.168.254.200 DHCPv6 IAID . . . . . . . . . . . : 315137244 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-4A-17-8D-10-78-D2-74-2F-8A DNS Servers . . . . . . . . . . . : 192.168.254.200 Primary WINS Server . . . . . . . : 192.168.254.200 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter isatap.XXXXXX.local: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : XXXXXX.local Description . . . . . . . . . . . : Microsoft ISATAP Adapter Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes The routing table: C:\>route print =========================================================================== Interface List 15...c8 9c dc 33 f1 65 ......Realtek PCIe GBE Family Controller #2 1...........................Software Loopback Interface 1 10...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 11...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.254.253 192.168.254.38 10 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.254.0 255.255.255.0 On-link 192.168.254.38 266 192.168.254.38 255.255.255.255 On-link 192.168.254.38 266 192.168.254.255 255.255.255.255 On-link 192.168.254.38 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.254.38 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.254.38 266 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 15 266 fe80::/64 On-link 15 266 fe80::3925:86a5:7066:ab92/128 On-link 1 306 ff00 ::/8 On-link 15 266 ff00::/8 On-link =========================================================================== Persistent Routes: None And the strange routing as demonstrated by tracert: C:\>tracert -d www.bbc.co.uk Tracing route to www.bbc.net.uk [212.58.246.95] over a maximum of 30 hops: 1 1 ms 1 ms <1 ms 192.168.254.254 2 1 ms 1 ms 1 ms 172.16.0.254 3 17 ms 18 ms 16 ms XXXXXXXXXXXXXXX 4 18 ms 19 ms 19 ms XXXXXXXXXXXXXXX 5 22 ms 22 ms 22 ms XXXXXXXXXXXXXXX 6 22 ms 21 ms 22 ms XXXXXXXXXXXXXXX 7 21 ms 21 ms 22 ms 217.41.169.109 8 30 ms 32 ms 57 ms 109.159.251.227 9 46 ms 39 ms 35 ms 109.159.251.137 10 27 ms 66 ms 30 ms 109.159.254.116 ^C However, when done from another Windows 7 workstation: C:\Users\administrator>ipconfig /allcompartments /all Windows IP Configuration ============================================================================== Network Information for Compartment 1 (ACTIVE) ============================================================================== Host Name . . . . . . . . . . . . : PABX-BACKUP Primary Dns Suffix . . . . . . . : XXXXXX.local Node Type . . . . . . . . . . . . : Broadcast IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : XXXXXX.local Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : XXXXXX.local Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 8C-89-A5-94-43-84 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::9479:1c11:6f9f:ae0b%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.254.77(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 15 August 2012 08:27:18 Lease Expires . . . . . . . . . . : 27 August 2012 08:27:31 Default Gateway . . . . . . . . . : 192.168.254.253 DHCP Server . . . . . . . . . . . : 192.168.254.200 DHCPv6 IAID . . . . . . . . . . . : 244091301 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-16-C2-79-BE-8C-89-A5-94-43-84 DNS Servers . . . . . . . . . . . : 192.168.254.200 Primary WINS Server . . . . . . . : 192.168.254.200 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter isatap.XXXXXX.local: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : XXXXXX.local Description . . . . . . . . . . . : Microsoft ISATAP Adapter Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Local Area Connection* 9: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft 6to4 Adapter Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes C:\Users\administrator> And finally, doing a tracert from the 2nd workstation yields expected results: C:\Users\administrator>tracert -d www.bbc.co.uk Tracing route to www.bbc.net.uk [212.58.244.67] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.254.253 2 1 ms 1 ms 1 ms 141.0.xxx.xxx 3 2 ms 2 ms 2 ms 141.0.xxx.xxx 4 7 ms 2 ms 2 ms 109.204.xxx.xxx 5 2 ms 2 ms 2 ms 95.177.0.7 6 3 ms 2 ms 2 ms 95.177.0.9 7 30 ms 2 ms 2 ms 95.177.0.2 8 2 ms 2 ms 2 ms 195.66.224.103 9 ^C As expected, it is routing via .253, and the 2nd hop is the inside interface of the Juniper NTU. I've not inspected the traffic yet. In particular, I was going to look for ICMP redirects, though why there would be an ICMP redirect at all is not really sensible? .254 used to be the default gateway before the fibre was installed. Any ideas? Doesn't make sense to me why there should be this routing issue :( The Draytek Dual WAN Router was rebooted, the PC was rebooted. The PC had the network disabled and then re-enabled. All the standard stuff when Windows looses the plot. Hopefully somebody recognises the symptoms! PS: Sorry for the long post, but I didn't want to leave something potentially relevant out. PPS: No iSCSI involved on/at this or any other workstation so Windows 7 routing traffic through the gateway for local addresses isn't the issue.

  Read the article

• Rails AtomFeedBuilder Entry :Url option appears in url tag but not in link tag

  - by Nick

  Hello, I'm using the AtomFeedHelper and everything is working fine except for one feed where I need to link each entry to a URL which is not the default polymorphic_url for the record. Per the documentation I've specified an :url option for the entry. This correctly renders a <url> tag in the atom node but the <link rel="alternate" still points to the default polymorphic_url. Looking at the source and the documentation I don't understand why this is happening. Here's an example builder: atom_feed do |feed| feed.title("Reports") feed.updated(@reports.first.created_at) for report in @reports content = report.notes feed.entry(report) do |entry| entry.title(report.title) entry.content(content, :type => 'html') entry.url("http://myhost/page/") entry.updated(report.updated_at.strftime("%Y-%m-%dT%H:%M:%SZ")) entry.author do |author| author.name(report.user.username) end end end end Here's an example of a problem node: <entry> <id>tag:molly.recargo.com,2005:SiteReport/2</id> <published>2010-03-30T13:11:07-07:00</published> <updated>2010-03-30T13:11:07-07:00</updated> <link rel="alternate" type="text/html" href="http://myhost/site_reports/2"/> <title>Test Title</title> <content type="html">Test Content</content> <url>http://myhost/page/</url> <updated>2010-03-30T13:11:07Z</updated> <author> <name>Author</name> </author> </entry> I wan the href value in the link tag to match the value in the url tag but it does not. When I look at the source listed for entry here http://api.rubyonrails.org/classes/ActionView/Helpers/AtomFeedHelper/AtomFeedBuilder.html I'd assume that this line would work correctly: @xml.link(:rel => 'alternate', :type => 'text/html', :href => options[:url] || @view.polymorphic_url(record)) Confused. Has anyone encountered this before? Thanks all!

  Read the article

• How to use Selenium Grid???

  - by user300591

  Hi All, I'm researching Selenium and have a seminar for my group... I meet many troubles with this I use C# language and write a demo SeleniumExample.dll Then i start selenium RC and NUnit and run it with nUnit to see the test report. I read testdata from xml. Here's the SeleniumExample.dll: using System; using System.Xml; using System.Text; using System.Text.RegularExpressions; using System.Threading; using NUnit.Framework; using Selenium; namespace SeleniumExample { public class Success_Login { //User defined private string strURL = "http://newtours.demoaut.com/ mercurywelcome.php"; private string[] strBrowser = new string[3] { "*iehta", "*firefox", "*safari" }; // System defined private ISelenium selenium; private StringBuilder verificationErrors ; [SetUp] public void SetupTest() { selenium = new DefaultSelenium("localhost", 4444, this.strBrowser[0], this.strURL); selenium.Start(); verificationErrors = new StringBuilder(); } [TearDown] public void TeardownTest() { try { selenium.Stop(); } catch (Exception) { // Ignore errors if unable to close the browser } Assert.AreEqual("", verificationErrors.ToString()); } [Test] public void Success_LoginTest() { try { XmlDocument doc = new XmlDocument(); XmlNode docNode; doc.Load("XMLFile1.xml"); docNode = doc["TestCase"]; foreach (XmlNode node in docNode) { selenium.Open("/"); selenium.Type("userName", node["username"].InnerText); selenium.Type("password", node["password"].InnerText); selenium.Click("login"); selenium.WaitForPageToLoad("30000"); Assert.AreEqual("Find a Flight: Mercury Tours:", selenium.GetTitle()); } } catch (AssertionException e) { verificationErrors.Append(e.Message); } } } } Now I wan to have a demo that using Selenium Grid (SG) but i dont know how to do. I read document and understand the way SG works. I install SG and install Ant1.8. The tests will communicate with Selenium Hub. Actually, I just understand the theory i dont know how to make the tests communicate with Selenium Hub and how to make Selenium Hub control Selenium RC. I am a new for Selenium. If anyone know this, please help me. I appreciate it so much. THANKS, Hoang

  Read the article

• Auto populate input based on file name with AngularJS

  - by LouieV

  I am playing around with AngularJS and have not been able to solve this problem. I have a view that has a form to upload a file to a node server. So far I have manage to do this using some directives and a service. I allow the user to send a custom name to the POST data if they desire. What I wan to accomplish is that when the user selects a file the filename models auto populates. My view looks like: <div> <input file-model="phpFile" type="file"> <input name="filename" type="text" ng-model="filename"> <button ng-click="send()">send</button> </div> file-model is my directive that allows the file to be assigned to a scope. myApp.directive('fileModel', ['$parse', function($parse) { return { restrict: 'A', link: function(scope, element, attrs) { var model = $parse.(attrs.fileModel); var modelSetter = model.assign; element.bind('change', function() { scope.$apply(function() { modelSetter(scope, element[0].files[0]); }); }); } }]); The service: myApp.service('fileUpload', ['$http', function($http){ this.uploadFileToUrl = function(file, uploadUrl, optionals) { var fd = new FormData(); fd.append('file', file); for (var key in file) { fd.append(key, file[key]); } for(var i = 0; i < optionals.length; i++){ fd.append(optionals[i].name, optionals[i].data); } }); }]); Here as you can see I pass the file, append its properties, and append any optional properties. In the controller is where I am having the troubles. I have tried $watch and using the file-model but I get the same error either way. myApp.controller('AddCtrl', function($scope, $location, PEberry, fileUpload){ //$scope.$watch(function() { // return $scope.phpFile; //},function(newValue, oldValue) { // $scope.filename = $scope.phpFile.name; //}, true); // if ($scope.phpFiles) { // $scope.filename = $scope.phpFiles.name; // } $scope.send = function() { var uploadUrl = "/files"; var file = $scope.phpFile; //var opts = [{ name: "uname", data: file.name }] fileUpload.uploadFileToUrl(file, uploadUrl); }; }); Thank you for your help!

  Read the article

• display image and run script for fifteen seconds

  - by Ryan Max

  This is very similar to a question I asked the other day but my page code has become significantly more complicated and I need to revisit it. I've been using the following code: $('#myLink').click(function() { $('#myImg').attr('src', 'newImg.jpg'); setTimeout(function() { $('#myImg').attr('src', 'oldImg.jpg'); }, 15000); }); To replace an image for a set period of time (15 seconds) when the link is clicked, then after 15 seconds, revert to the original image. However now, I'd like to run a snippet of javascript as well when the link is clicked (in addition to replacing the image), and only when the link is clicked (it's related to the 15 second image) and then have the js code disappear as well after the 15 seconds...however I'm not sure how to have jquery send js code into the page...Basically I just want jQuery to "echo" this code onto the page underneath the 15 second while I am there, but I don't know how jquery formats this "echo". Does this question make sense? interval = 500; imgsrc = "webcam/image.jpg"; function Refresh() { tmp = new Date(); tmp = "?" + tmp.getTime(); document.images["image1"].src = imgsrc + tmp; setTimeout("Refresh()", interval); } Refresh(); It's script for a webcam. Basically it takes a new picture every half a second and replaces it on the page. You must forgive me, I'm new to jquery, I don't know how to make this script work in a jquery context. i'm sorry, I'm explaining badly. This is what I need to happen, step by step: 1) User comes to the page and there is a static image that says "Click here to view webcam" 2) User clicks image 3) Image is replaced by live webcam image, which is refreshed every .5 seconds by the second script in my question. 4) After 15 seconds the live webcam reverts back to the static image saying "click here to view webcam" It is ONLY during that 15 second interval that I wan the webcam refresh script running, otherwise it's wasting bandwidth on an element that isn't even shown. Sorry for the confusion.

  Read the article

• Local and global variables in javascript

  - by caramel1991

  Today,I started to code a page that prompt the user to choose their PC spec,and the code is as follow <html> <title>Computer Specification Chooser</title> <head> <script type="text/javascript"> var compSpec = document.compChooser; function processorUnavailable_onclick() { alert("Sorry that processor speed is currently unavailable"); compSpec.processor[2].checked = true; } </script> </head> <body> <form name="compChooser"> <p>Tick all components you wan included on your computer</p> <p> DVD-ROM <input type="checkbox" name="chkDVD" value="DVD-ROM" /> <br /> CD-ROM <input type="checkbox" name="chkCD" value="CD-ROM" /> <br /> Zip Drive <input type="checkbox" name="chkZIP" value="ZIP DRIVE" /> </p> <p> Select the processor speed you require <br /> <input type="radio" name="processor" value="3.8" /> 3.8 GHZ <input type="radio" name="processor" value="4.8" onclick="processorUnavailable_onclick()" /> 4.8 GHZ <input type="radio" name="processor" value="6" /> 6 GHZ </p> <input type="button" name="btnCheck" value="Check Form" /> </form> </body> </html> The problem I'm facing is on the function that I've tie to the event handler,when I try to choose the radio button of the processor value 4.8 GHZ,yes it alert me with the message inside the function,but after that,it doest not execute the next statement inside the function,that is to check the next processor value 6 GHZ. I've try my effort to change it and test on it,and find out when I set the var compSpec = document.compChooser as a local variable inside the function instead of a global variable,the next statement could be executed. But I thought for a global variable,it is accessible in everywhere on the page and also inside a function.But why now I can't accesses it inside my function??Any idea?? Besides,I stumble upon a weird article while googling,it says that when a global variable is created,it is added to window object.I just curious why this happen??And what's the benefits and uses of it?? THANK YOU

  Read the article

• Quetion regarding local and global variable in javascript

  - by caramel1991

  Today,I started to code a page that prompt the user to choose their PC spec,and the code is as follow <html> <title>Computer Specification Chooser</title> <head> <script type="text/javascript"> var compSpec = document.compChooser; function processorUnavailable_onclick() { alert("Sorry that processor speed is currently unavailable"); compSpec.processor[2].checked = true; } </script> </head> <body> <form name="compChooser"> <p>Tick all components you wan included on your computer</p> <p> DVD-ROM <input type="checkbox" name="chkDVD" value="DVD-ROM" /> <br /> CD-ROM <input type="checkbox" name="chkCD" value="CD-ROM" /> <br /> Zip Drive <input type="checkbox" name="chkZIP" value="ZIP DRIVE" /> </p> <p> Select the processor speed you require <br /> <input type="radio" name="processor" value="3.8" /> 3.8 GHZ <input type="radio" name="processor" value="4.8" onclick="processorUnavailable_onclick()" /> 4.8 GHZ <input type="radio" name="processor" value="6" /> 6 GHZ </p> <input type="button" name="btnCheck" value="Check Form" /> </form> </body> </html> The problem I'm facing is on the function that I've tie to the event handler,when I try to choose the radio button of the processor value 4.8 GHZ,yes it alert me with the message inside the function,but after that,it doest not execute the next statement inside the function,that is to check the next processor value 6 GHZ,I've try my effort to change it and test on it,and find out when I set the var compSpec = document.compChooser as a local variable inside the function instead of a global variable,the next statement could be executed.But I thought for a global variable,it is accessible in everywhere on the page and also inside a function.But why now I can't accesses it inside my function??Any idea??Besides,I stumble upon a weird article while googling,it says that when a global variable is created,it is added to window object.I just curious why this happen??And what's the benefits and uses of it??THANK YOU

  Read the article

• How to bridge Debian guest VM to VPN via Cisco AnyConnect Client running on Windows Vista host

  - by bgoodr

  I am running Cisco Anyconnect VPN Client version 2.5.3054 on a laptop running Windows Vista Home Premium (version 6.0.6002) Service Pack 2. I am running the VMware Player version 4.0.2 build-591240. The host operating system running under VMware Player is Debian 6.0.2.1 i386. The laptop is connected to a wireless connection, and I can browse the web from Windows Vista using Firefox just fine. I am able to boot into the Debian VM and open up a browser and access websites on the WAN from within the VM just fine. I can ping real Linux hosts on my LAN via: ping <lan_system>.local where <lan_system> is the hostname returned from uname -a on that system on my LAN. From a DOS CMD shell, I am able to ping hosts that exist on the remote network served by the Cisco AnyConnect Client's VPN network (and without the .local suffix applied as above): ping <remote_system> However, from within the Debian VM, I expect to be able to also ping those same remote hosts (<remote_system>) that are tunnelled over the VPN set up by Cisco AnyConnect Client. Let's say that I can ping a <remote_system> called flubber from a DOS CMD prompt just fine. When I execute Linux ping command from inside the Debian VM via: ping flubber It returns immediately with this output: ping: unknown host flubber For reference since I suspect it will be useful, here is the output of the route print command from the DOS CMD prompt: route print =========================================================================== Interface List 30 ...00 05 9a 3c 7a 00 ...... Cisco AnyConnect VPN Virtual Miniport Adapter for Windows 11 ...00 1b 9e c4 de e5 ...... Atheros AR5007EG Wireless Network Adapter 26 ...00 50 56 c0 00 01 ...... VMware Virtual Ethernet Adapter for VMnet1 28 ...00 50 56 c0 00 08 ...... VMware Virtual Ethernet Adapter for VMnet8 1 ........................... Software Loopback Interface 1 12 ...02 00 54 55 4e 01 ...... Teredo Tunneling Pseudo-Interface 13 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 32 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #4 27 ...00 00 00 00 00 00 00 e0 isatap.{E5292CF6-4FBB-4320-806D-A6B366769255} 17 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 20 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #8 22 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #10 24 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #11 25 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #12 29 ...00 00 00 00 00 00 00 e0 isatap.{C3852986-5053-4E2E-BE60-52EA2FCF5899} 41 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #14 =========================================================================== At the top window border of the VM, clicking on Virtual Machine, then clicking on Virtual Machine Settings, then clicking on Network Adapter, I have these two options checked: [X] Bridged: Connected directly to the physical Network [X] Replicate physical network connection state [ ] NAT: used to share the hosts's IP address [ ] Host-only: A private network shared with the host [ ] LAN segment: [ ] <LAN Segments...> <Advanced> I've toyed with the other options such as NAT and Host-only but that had no effect. Is there some way to allow the VM to access those <remote_system>'s?

  Read the article

• Weird networking problem ( Linksys, Windows 7 )

  - by Rohit Nair

  Okay it's a bit tough to figure out where to start from, but here is the basic summary of the issue: During general internet usage, there are times when any attempt to visit a website stalls at "Waiting for somedomain.com". This problem occurs in Firefox, IE and Chrome. No website will load, INCLUDING the router configuration page at 192.168.1.1. Curiously, ping works fine, and other network apps such as MSN Messenger continue to work and I can send and receive messages. Disconnecting and reconnecting to the wireless network seems to fix the problem for a bit, but there are times when it relapses into not loading after every 2-3 http requests. Restarting the router seems to fix the issue, but it can crop up hours or days later. I have a CCNA cert and I know my way around the Windows family of operating systems, so I'm going to list all the things I've tried here. Other computers on the network seem to suffer the same problem, which makes me think it might be a specific problem with something in Win7. The random nature of this issue makes it a bit difficult to confirm, but I can definitely say that I have experienced this on the following systems: Windows 7 64-bit on my desktop Windows Vista 32-bit on my desktop ( the desktop has 2 wireless NICs and the problem existed on both ) Windows Vista 32-bit on my laptop ( both with wireless and wired ) Windows XP SP3 on another laptop ( both wireless and wired ) Using Wireshark to sniff packets seemed to indicate that although HTTP requests were being SENT out, no packets were coming in to respond to the HTTP request. However, other network apps continued to work i.e I would still receive IMs on Windows Live Messenger. Disabling IPV6 had no effect. Updating router firmware to the latest stock firmware by Linksys had no effect. Switching to dd-wrt firmware had no effect. By "no effect" I mean that although the restart required by firmware updates fixed the problem at the time, it still came back. A couple of weeks back, after a LOT of googling and flipping of various options, I figured it might be a case of router slowdown ( http://www.dd-wrt.com/wiki/index.php/Router%5FSlowdown ) caused by the fact that I occasionally run a torrent client. I tried changing the configuration as suggested in that router slowdown link, and restarted the router. However I have not run the torrent client for 12 days now, and yet I still randomly experience this problem. Currently the computer I am using is running Windows 7 64-bit. I would just like to reiterate some of the reasons that I was confused by the issue. Even the router config page at 192.168.1.1 would not load, indicating that it's not a problem with the WAN link, but probably a router issue or a local computer issue. For some reason, disconnecting and reconnecting to the wireless network immediately seems to fix the problem. Updating the router firmware, even switching to open source firmware did nothing. So it seemed to be a computer issue. On the other hand, I have not seen any mass outrage of people having networking problems with Windows 7 and Linksys routers, especially a problem of this sort, and I have tweaked every network setting I could think of. Although HTTP seems to have trouble, ping works fine, DNS lookups work fine, other networking apps work fine. However if I disconnect from Windows Live Messenger and try to reconnect, it fails to reconnect. So although it could receive data over the existing TCP/IP connection, trying to start a new one failed? Does anyone have any further ideas on debugging or fixing this issue? I am reasonably certain there are no viruses or other malicious apps on my network, and I am also reasonably certain that nobody is accessing my router without my consent. Router: Linksys WRT54G2 1.0 running dd-wrt firmware Wireless Card: Alfa AWUS036H OS: Windows 7 64-bit EDIT: I tried switching to a clean wireless channel free from interference, but the problem still persisted. I tried connecting directly with a cable, but the problem still persisted. Signed A very confused and bewildered geek whose knowledge seems to be useless in the face of this frustrating network issue.

  Read the article

• Debian, 6rd tunnel, and connection troubles

  - by Chris B

  Long story short I am having issues with IPv6 using a 6rd tunnel with my ISP, charter business. They offer a 6rd tunnel that I think I have properly set up, but the server doesn’t reply to every ipv6 request. When the server has the network interfaces idle with no traffic for about 10 minutes, then IPv6 stops accepting inbound connections. to re-allow it, I must go into the server, and make it do a outbound ipv6 connection (normally a ping) to start it back up. Whats weird though i that if I run iptraf when its not working, it still shows a inbound ipv6 packet… the server is just not replying, and I can’t figure out why. Also, if I try to access my server over IPv6 from a house about 1 mile away on the same ISP, it is never able to connect. it always times out, but again the iptraf shows a ipv6 inbound packet. Again, it just does not reply. To test if my server is accessible through IPv6 I always have to use my vzw 4g phone (they use IPv6) or ipv6proxy dot net. Here is all of the configuration information my ISP gives on there tunnel server: 6rd Prefix = 2602:100::/32 Border Relay Address = 68.114.165.1 6rd prefix length = 32 IPv4 mask length = 0 Here is my /etc/network/interfaces for ipv6 (used x's to block real addresses) auto charterv6 iface charterv6 inet6 v4tunnel address 2602:100:189f:xxxx::1 netmask 32 ttl 64 gateway ::68.114.165.1 endpoint 68.114.165.1 local 24.159.218.xxx up ip link set mtu 1280 dev charterv6 here is my iptables config filter :INPUT DROP [0:0] :fail2ban-ssh – [0:0] :OUTPUT ACCEPT [0:0] :FORWARD DROP [0:0] :hold – [0:0] -A INPUT -p tcp -m tcp —dport 22 -j fail2ban-ssh -A INPUT -m state —state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m multiport -j ACCEPT —dports 80,443,25,465,110,995,143,993,587,465,22 -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m tcp —dport 10000 -j ACCEPT -A INPUT -p tcp -m tcp —dport 5900:5910 -j ACCEPT -A fail2ban-ssh -j RETURN -A INPUT -p icmp -j ACCEPT COMMIT and last here is my ip6tables firewall config filter :INPUT DROP [1653:339023] :FORWARD DROP [0:0] :OUTPUT ACCEPT [60141:13757903] :hold – [0:0] -A INPUT -m state —state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m multiport —dports 80,443,25,465,110,995,143,993,587,465,22 -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m tcp —dport 10000 -j ACCEPT -A INPUT -p tcp -m tcp —dport 5900:5910 -j ACCEPT -A INPUT -p ipv6-icmp -j ACCEPT COMMIT So Summary: 1.iptraf always shows IPv6 traffic, so its always making it to the server 2.server stops replying on ipv6 after no traffic for awhile (10 minutesish) until a outbound connection is made, then the process repeats. 3.server is NEVER accessable vi same ISP (yet iptraf still shows ipv6 request) Notes: When I try to access it from the same ISP from across town, even with iptables and ip6tables allowing ALL inbound traffic, this is what iptraf shows. IPv6 (92 bytes) from 97.92.18.xxx to 24.159.218.xxx on eth0 ICMP dest unrch (port) (120 bytes) from 24.159.218.xxx to 97.92.18.xxx on eth1 its strange, like its trying to forward to LAN? (eth1 is LAN, eth0 is WAN) even with the IPv6 address being set in the hosts file to the servers domain name. With iptables set up normally with the above configurations it only says this: IPv6 (100 bytes) from 97.92.18.xxx to 24.159.218.xxx on eth0 Im REALLY stuck on this, and any help would be GREATLY appreciated.

  Read the article

• Cisco ASA (Client VPN) to LAN - through second VPN to second LAN

  - by user50855

  We have 2 site that is linked by an IPSEC VPN to remote Cisco ASAs: Site 1 1.5Mb T1 Connection Cisco(1) 2841 Site 2 1.5Mb T1 Connection Cisco 2841 In addition: Site 1 has a 2nd WAN 3Mb bonded T1 Connection Cisco 5510 that connects to same LAN as Cisco(1) 2841. Basically, Remote Access (VPN) users connecting through Cisco ASA 5510 needs access to a service at the end of Site 2. This is due to the way the service is sold - Cisco 2841 routers are not under our management and it is setup to allow connection from local LAN VLAN 1 IP address 10.20.0.0/24. My idea is to have all traffic from Remote Users through Cisco ASA destined for Site 2 to go via the VPN between Site 1 and Site 2. The end result being all traffic that hits Site 2 has come via Site 1. I'm struggling to find a great deal of information on how this is setup. So, firstly, can anyone confirm that what I'm trying to achieve is possible? Secondly, can anyone help me to correct the configuration bellow or point me in the direction of an example of such a configuration? Many Thanks. interface Ethernet0/0 nameif outside security-level 0 ip address 7.7.7.19 255.255.255.240 interface Ethernet0/1 nameif inside security-level 100 ip address 10.20.0.249 255.255.255.0 object-group network group-inside-vpnclient description All inside networks accessible to vpn clients network-object 10.20.0.0 255.255.255.0 network-object 10.20.1.0 255.255.255.0 object-group network group-adp-network description ADP IP Address or network accessible to vpn clients network-object 207.207.207.173 255.255.255.255 access-list outside_access_in extended permit icmp any any echo-reply access-list outside_access_in extended permit icmp any any source-quench access-list outside_access_in extended permit icmp any any unreachable access-list outside_access_in extended permit icmp any any time-exceeded access-list outside_access_in extended permit tcp any host 7.7.7.20 eq smtp access-list outside_access_in extended permit tcp any host 7.7.7.20 eq https access-list outside_access_in extended permit tcp any host 7.7.7.20 eq pop3 access-list outside_access_in extended permit tcp any host 7.7.7.20 eq www access-list outside_access_in extended permit tcp any host 7.7.7.21 eq www access-list outside_access_in extended permit tcp any host 7.7.7.21 eq https access-list outside_access_in extended permit tcp any host 7.7.7.21 eq 5721 access-list acl-vpnclient extended permit ip object-group group-inside-vpnclient any access-list acl-vpnclient extended permit ip object-group group-inside-vpnclient object-group group-adp-network access-list acl-vpnclient extended permit ip object-group group-adp-network object-group group-inside-vpnclient access-list PinesFLVPNTunnel_splitTunnelAcl standard permit 10.20.0.0 255.255.255.0 access-list inside_nat0_outbound_1 extended permit ip 10.20.0.0 255.255.255.0 10.20.1.0 255.255.255.0 access-list inside_nat0_outbound_1 extended permit ip 10.20.0.0 255.255.255.0 host 207.207.207.173 access-list inside_nat0_outbound_1 extended permit ip 10.20.1.0 255.255.255.0 host 207.207.207.173 ip local pool VPNPool 10.20.1.100-10.20.1.200 mask 255.255.255.0 route outside 0.0.0.0 0.0.0.0 7.7.7.17 1 route inside 207.207.207.173 255.255.255.255 10.20.0.3 1 crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto dynamic-map outside_dyn_map 20 set security-association lifetime seconds 288000 crypto dynamic-map outside_dyn_map 20 set security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set reverse-route crypto map outside_map 20 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto map outside_dyn_map 20 match address acl-vpnclient crypto map outside_dyn_map 20 set security-association lifetime seconds 28800 crypto map outside_dyn_map 20 set security-association lifetime kilobytes 4608000 crypto isakmp identity address crypto isakmp enable outside crypto isakmp policy 20 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 group-policy YeahRightflVPNTunnel internal group-policy YeahRightflVPNTunnel attributes wins-server value 10.20.0.9 dns-server value 10.20.0.9 vpn-tunnel-protocol IPSec password-storage disable pfs disable split-tunnel-policy tunnelspecified split-tunnel-network-list value acl-vpnclient default-domain value YeahRight.com group-policy YeahRightFLVPNTunnel internal group-policy YeahRightFLVPNTunnel attributes wins-server value 10.20.0.9 dns-server value 10.20.0.9 10.20.0.7 vpn-tunnel-protocol IPSec split-tunnel-policy tunnelspecified split-tunnel-network-list value YeahRightFLVPNTunnel_splitTunnelAcl default-domain value yeahright.com tunnel-group YeahRightFLVPN type remote-access tunnel-group YeahRightFLVPN general-attributes address-pool VPNPool tunnel-group YeahRightFLVPNTunnel type remote-access tunnel-group YeahRightFLVPNTunnel general-attributes address-pool VPNPool authentication-server-group WinRadius default-group-policy YeahRightFLVPNTunnel tunnel-group YeahRightFLVPNTunnel ipsec-attributes pre-shared-key *

  Read the article

• Cisco ASA 5505 site to site IPSEC VPN won't route from multiple LANs

  - by franklundy

  Hi I've set up a standard site to site VPN between 2 ASA 5505s (using the wizard in ASDM) and have the VPN working fine for traffic between Site A and Site B on the directly connected LANs. But this VPN is actually to be used for data originating on LAN subnets that are one hop away from the directly connected LANs. So actually there is another router connected to each ASA (LAN side) that then route to two completely different LAN ranges, where the clients and servers reside. At the moment, any traffic that gets to the ASA that has not originated from the directly connected LAN gets sent straight to the default gateway, and not through the VPN. I've tried adding the additional subnets to the "Protected Networks" on the VPN, but that has no effect. I have also tried adding a static route to each ASA trying to point the traffic to the other side, but again this hasn't worked. Here is the config for one of the sites. This works for traffic to/from the 192.168.144.x subnets perfectly. What I need is to be able to route traffic from 10.1.0.0/24 to 10.2.0.0/24 for example. ASA Version 8.0(3) ! hostname Site1 enable password ** encrypted names name 192.168.144.4 Site2 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.144.2 255.255.255.252 ! interface Vlan2 nameif outside security-level 0 ip address 10.78.254.70 255.255.255.252 (this is a private WAN circuit) ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! passwd ** encrypted ftp mode passive access-list inside_access_in extended permit ip any any access-list outside_access_in extended permit icmp any any echo-reply access-list outside_1_cryptomap extended permit ip 192.168.144.0 255.255.255.252 Site2 255.255.255.252 access-list inside_nat0_outbound extended permit ip 192.168.144.0 255.255.255.252 Site2 255.255.255.252 pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-603.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 access-group inside_access_in in interface inside access-group outside_access_in in interface outside route outside 0.0.0.0 0.0.0.0 10.78.254.69 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout uauth 0:05:00 absolute dynamic-access-policy-record DfltAccessPolicy aaa authentication ssh console LOCAL http server enable http 0.0.0.0 0.0.0.0 outside http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto map outside_map 1 match address outside_1_cryptomap crypto map outside_map 1 set pfs crypto map outside_map 1 set peer 10.78.254.66 crypto map outside_map 1 set transform-set ESP-3DES-SHA crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 no crypto isakmp nat-traversal telnet timeout 5 ssh 0.0.0.0 0.0.0.0 outside ssh timeout 5 console timeout 0 management-access inside threat-detection basic-threat threat-detection statistics port threat-detection statistics protocol threat-detection statistics access-list group-policy DfltGrpPolicy attributes vpn-idle-timeout none username enadmin password * encrypted privilege 15 tunnel-group 10.78.254.66 type ipsec-l2l tunnel-group 10.78.254.66 ipsec-attributes pre-shared-key * ! ! prompt hostname context

  Read the article

• Weird Network Behavior of Home Router

  - by Stilgar

  First of all I would like to apologize because what you are going to read will be long and confusing but I am fighting this issue for 3 days now and am out of ideas. At home I have the following setup 50Mbps Internet connects into a home router A 2 desktop computers connect to router A via standard FTP LAN cables including one where the cable is ~20m long. a second router B connects to router A via standard FTP LAN cable X (~20m long). several devices connect to the wireless network of router B and there are a couple of desktop computers connected to it through FTP LAN cables. For some reason computers connected to router B when it is connected via cable X have very slow Internet connection. It is like 5 times slower than what is expected. This is the actual problem I am trying to solve. Interesting facts If a computer is connected to cable X directly instead of through router B the Internet speed is just fine (up to the 50Mbps I get from the ISP). Tested with two computers. I have tried replacing router B with another router C and the problem persists. If I connect router B via another cable to the same ports with the same settings everything seems to work fine and computers connected to router B have quite fast Internet I have tested mainly via Speedtest.net but I have also achieved similar speeds when downloading a file The upload speed is quite higher than the download speed in all cases. Note that my ISP usually has higher upload speed (unless it manages to hit the 50Mbps cap) It seems like the speed when connecting through router B with cable X is reduced 4-5 times no matter what the original speed is. For example via router B I get 10Mbps speed to local servers where I get 50Mbps when connected on router A. If I use a distant server where the ISP is only able to provide 25Mbps I get 4-5Mbps on router B. WiFi is slower than LAN on both routers (which is normal) but the reduced speed is reduced proportionally for WiFi. In addition the upload speed is normally higher from the ISP and it is also reduced proportionally. I have tried two different network configurations. One where I have NAT behind NAT where router B connects to router A via the WAN port and has its own DHCP. Second where router B connects to router A via standard LAN port and has DHCP disabled. In this configuration router B serves as a switch and the Network Gateway for computers connected to router B is the internal IP address of router A. Both configurations work just fine but both manifest the reduced speed issue. pings seem to work just fine As far as I can tell none of the cables is crossed The RJ45 setup for cable X orange orange-white brown brow-white blue blue-white green green-white This is a big problem for me since cable X passes through walls and floors and is very hard to replace. I also may have gotten some of the facts wrong because I am almost going crazy with this issue and testing includes going several floors up and down the staircase. One hypothesis I came up with is that the cable is defective in such a way that the voltage from the router affects its performance. When it is connected to a computer it performs just fine but the router has less power. Related hypothesis includes the cable being affected by electricity cables in the walls when the voltage is low. (I know nothing about electricity) So any ideas what to do, what to test or what the issue may be?

  Read the article

• DNS lookups failing somewhere between firewall and router

  - by TessellatingHeckler

  we have a setup of ADSL line - Cisco 837 ADSL router - Zyxel ZyWall 35 firewall/NAT - Switch == Intel load balanced NICS in a server. It has been fine for years, suddenly DNS resolution stopped working on the server. No changes that I know of, so I can't work backwards from there. It was configured with the ISP's DNS servers, neither network device does DNS relaying. Wireshark shows the request go out but nothing comes back. The server networking stack seems OK though, because if we query an internal DNS server on a remote site, that works. I can logon to the Cisco, and DNS resolves OK from the command line. I can logon to the ZyWall, and DNS does not resolve from the command line. So the problem seems to be the firewall, patch cable or router, yes? On the router: interface Ethernet0 ip address aaa.bbb.ccc.ddd 255.255.255.ddd ip tcp adjust-mss 1450 hold-queue 100 out On the firewall: DNS server set to 8.8.8.8 (Google's), DNS traffic allowed LAN-WAN. What else should I look for? Update: Following This guide I've got traffic logging on the Cisco. I have also got access to a public DNS server which I can run tcpdump on to see things from the other side. And as per the below comments, I've tested with Dig and see that DNS over TCP works, and over UDP does not. Currently: DNS request from the server using TCP shows up in the firewall log, and in the Cisco log, and in tcpdump on the DNS server, the answer comes back, it works fine. DNS request from the server using UDP shows up in the firewall log, and in the Cisco log, does NOT show in tcpdump on the DNS server, times out. DNS request from the cisco (using UDP) does show up in tcpdump on the DNS server, answer received, works fine. Ping requests from the server and the cisco to the DNS server show up in tcpdump on the DNS server. DNS request from the server using UDP does show up on the firewall. Summary: TCP seems fine throughought. UDP works over the ADSL and to the Cisco, and it works from the server to the Cisco, but it doesn't cross the Cisco properly, it seems. I did see the Cisco showing as connected at 10Mb/full-duplex internally, and the firewall showing as 100Mb/full-duplex externally. I have forced the firewall to 10Mb and rebooted both devices. That seemed to help get UDP traffic (server-firewall-cisco) instead of (server-firewall), but did not fix it. Update: Sanitized Cisco config: version 12.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname cisco ! logging queue-limit 100 enable secret 5 {password} enable password 7 {password} ! ip subnet-zero ip domain name example.org ip name-server {nameserver_IP} ! ! ip audit notify log ip audit po max-events 100 no ftp-server write-enable ! interface Ethernet0 ip address {Inside_public_IP} 255.255.255.248 ip tcp adjust-mss 1460 hold-queue 100 out ! interface ATM0 no ip address no atm ilmi-keepalive pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto ! interface Dialer1 ip unnumbered Ethernet0 encapsulation ppp dialer pool 1 dialer idle-timeout 0 dialer persistent no cdp enable ppp chap hostname {ADSL_Username} ppp chap password 7 {ADSL_Password} ! ip classless ip route 0.0.0.0 0.0.0.0 Dialer1 no ip http server no ip http secure-server ! access-list 23 permit {IP} dialer-list 1 protocol ip permit no cdp run snmp-server enable traps tty ! {con, vty} end

  Read the article

< Previous Page | 27 28 29 30 31 32 33  | Next Page >