Search Results

Search found 1323 results on 53 pages for 'in the zone'.

Page 31/53 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

• Ubuntu installation does not recognize previous partitions

  - by Hawkcannon

  I have been attempting to install Ubuntu (10.04, Lucid Lynx) on my computer. I wasn't ready to take the pure-Linux plunge yet, so I reserved a partition on which I would install Ubuntu. I ran the installer and answered the 'minor' questions (keyboard layout, time zone, etc.), but had trouble when I reached the partitioning. I have several partitions, but Ubuntu only saw one of them, which was not the ext3 partition that I had set up. I tried deleting the partition in hope that the installer would find and utilize the empty space, but it only saw the original partition. I do not have an external hard drive to use, and I cannot clear any existing partitions. Am I running the installer incorrectly, or is there a more serious problem?

  Read the article

• Ubuntu installation does not recognize previous partitions

  - by Hawkcannon

  I have been attempting to install Ubuntu (10.04, Lucid Lynx) on my computer. I wasn't ready to take the pure-Linux plunge yet, so I reserved a partition on which I would install Ubuntu. I ran the installer and answered the 'minor' questions (keyboard layout, time zone, etc.), but had trouble when I reached the partitioning. I have several partitions, but Ubuntu only saw one of them, which was not the ext3 partition that I had set up. I tried deleting the partition in hope that the installer would find and utilize the empty space, but it only saw the original partition. I do not have an external hard drive to use, and I cannot clear any existing partitions. Am I running the installer incorrectly, or is there a more serious problem?

  Read the article

• Windows Server 2008 R2 DNS Server Intermittently Unresponsive

  - by Ablue

  Throughout the day out DNS servers (2x Win 2k8 R2 servers) are unable to respond to requests. The requests that fail are all on the .root zone that are either cached or obtained from 1 of 5 DNS servers we forward to before going to root hints. At first I thought the DNS servers we were forwarding to were flaky. So I added some more in. Currently the forwarding list looks like ISP DNS 1 OPEN DNS 1 ISP DNS 2 OPEN DNS 2 ISP DNS 3 I have tried: Turning off root hints. Set record scavenging to 7 days. Using dnscmd /config /EnableEDNSProbes 0 as per this. Packet capture at the DNS server shows that there is a lot of query responses with server failure between lan clients and the local dns server; it does not appear to be forwarding those requests. So maybe a problem with caching? Anyhow, does anything have anything I can try to get this working?

  Read the article

• How to use private DNS to map private IP with "non registred" domain name

  - by PapelPincel

  I would like to use a private DNS (Route53 in our case) in order to map hosts to EC2 instance private IP addresse. The hosted zone we are using for testing is not declared in any registrar (company-test.com.). There are different servers (Nagios, Puppet, ActiveMQ ...) all hosted in ec2, that means their IP can change over time (restart, new instance launch...). That would be great if I can use DNS instead of clients' /etc/hosts for mapping private IP/internal domain name... The ActiveMQ server url is activemq.company-test.com and it maps to (A record) private IP address of the AMQ server. This url is only reachable by other ec2 owned by the same aws account. My question is how to configure ec2 instances so they could reach the ActiveMQ server WITHOUT having to buy a new domain company-test.com ?

  Read the article

• PowerDNS, updating serial

  - by Roland

  I recently wrote script that automatically enteres new Sub Domain records into the PDS mySql database. Now if I enter the entry mannually using Zone Admin my sub domain works 100%. Now if I add it using a simply SQL insert string eg "insert into records (domain_id, name,type,content,ttl,prio) values("; it does not work, I got told that I need to update the SOA serial which I do but it just does not want to take effect. I do the following date(Ymd)."01" and this does not work, any suggestions will be greatly appreciated

  Read the article

• Does Dynamic DNS require separate subdomains?

  - by kce

  Hello. I have a functioning DHCP/DNS (ISC Bind 9.6, DHCP 3.1.1) server running on Debian that I would like to add DynamicDNS functionality to. I have a pretty simple question: Does DynamicDNS require (or recommend) separate sub-domains? I have seen a few tutorials where the the clients that are acquiring their IP addresses and other networking information via DHCP are on a different sub-domain as the servers which are statically configured (both in terms of IP, and DNS). For example: All the clients are on ws.example.org and the servers on example.org. Right now all of our servers and clients are in the same domain (example.org) but spread across different zone files (because we have multiple subnets). The clients are configured with DHCP and the servers are configured statically. If I want to setup DynamicDNS for the clients should I use a separate sub-domain? What's the best practice here (and why or why not would it be a bad idea to do otherwise)? Thanks.

  Read the article

• SQL Server 2008 lincensing question relating to web servers

  - by Matty Brown

  We purchased SQL Server 2008 Standard licences last year under the server + device CAL licencing model. Since our server has 2 physical CPUs and only 46 clients, this option was by far the cheapest. Now we'd like to be able to query a small number of stored procedures from our Windows Server 2003 Web Edition server, which is in a seperate zone on our firewall. I think SQL Server 2008 Web Edition could be an option to us, but is it possible to replicate/mirror stored procedures and tables to such a server and would we be breaking any rules by doing so? Is this a form of multiplexing? Also, would replication/mirroring work both ways, if we were to want to write back data from the web server?

  Read the article

• ISC Bind support for GSS-TSIG DDNS Updates?

  - by netlinxman

  First, has anyone EVER configured ISC bind 9.5.0 OR greater with support for GSS-TSIG Dynamic DNS Updates AND gotten it to work? If so, what is the configuration that was used to make that happen? I feel close to having this working. I see that GSS cred passes w/o apparent error during the TKEY negotiation with an Active Directory DC and the BIND DNS server: client 192.168.0.30#52314: query gss cred: "DNS/[email protected]", GSS_C_ACCEPT, 4294967256 gss-api source name (accept) is [email protected] process_gsstkey(): dns_tsigerror_noerror client 192.168.0.30#52314: send But, when the Update is sent, it is refused: client 192.168.0.30#58330: update client 192.168.0.30#58330: updating zone 'example.com/IN': update failed: rejected by secure update (REFUSED) client 192.168.0.30#58330: send Does anyone have this working in the real world?

  Read the article

• Rainmeter customization issues, pretty basic

  - by user62865

  I'll admit it; I'm new to using Rainmeter. What I want to do is create two panels (one left, the other on the right) that mirror one another. One side I want to work for the Eastern US while the other for the UK. I want to keep digital clocks, the same style etc., on both sides with their respective time zone. On top of this I want to have weather reports for the whole day (Current weather and temp, morning, afternoon, and night) for each location. However, I have not been able to find any skins which allow this. For whatever reason every time I try to load a skin for a clock I can only load it for one clock of that type and I'm having the same issue with the weather skins. Could anyone please tell me what skins I should look at and how to get a mirrored look?

  Read the article

• How to configure bind9 to route to host's IP

  - by Greg

  I'm running apache and bind9 on the same server. I would like to set a master zone to route back to this very machine's IP address without explicitly specifying it. Is this possible? If I use 127.0.0.1 for the A record, then when another computer on the network does an nslookup for mydomain.local, bind of course just returns the loopback ip (127.0.0.1) -- not the IP of the server. Is there to way to tell it to just return the network IP address for the server itself, as defined in /etc/network/interfaces?

  Read the article

• Firewall to block traffic to specific websites

  - by Ctroy

  I have recently switched from MAC to Windows Vista. I used to have LittleSnitch on Mac where I can create filters and disable browsing to other websites. I mean, I can create filters so that LittleSnitch will not send traffic to specific websites like Google Analytics etc. However, I cannot find a similar software on Windows. I tried Zone Alarm firewall, but it doesn't let you add filters to stop traffic to specific websites. Are there any software available on windows which are similar to LittleSnitch?

  Read the article

• taskbar-free window manager

  - by 7vies

  I'm looking for a window manager that is not based on the "standard" taskbar (which I find a poor idea and I'm completely tired of). I'm aware of tiling window managers and improvements in last versions of operating systems, but I can't find what I need. I suppose that any window takes the whole screen (or can be tiled), and I imagine switching between windows like that: on a hotkey or mouse hot zone the screen becomes a task switcher where tasks are organized in a somewhat convenient manner. Well, it's a bit like a taskbar with autohide, but I think there could be some more convenient ideas than simply stacking icons and descriptions... It is also supposed to be lightweight enough, for example to run on a netbook. Any suggestions?

  Read the article

• Why is my NTP controlled computer clock two minutes ahead?

  - by Martin Liversage

  The clock in my computer is configured to be synchronized using NTP. To verify this I have tried two NTP clients using various NTP servers. My computer and the NTP clients are in complete agreement about the current time even across a wide range of NTP servers. I also have a GPS and my national phone company provides an accurate clock available by calling a specific phone number. Both my GPS and the phone company agrees on the current time. However, my computer is almost precisely two minutes (or 1 minute and 59 seconds) ahead of what I believe to be the "real" current time where I live. Why is my computer two minutes ahead? I realize that synchronizing clocks using the internet may not be entirely accurate as there is latency, but two minutes is a very long time on the internet. Is NTP really two minutes ahead? I'm running Windows 7 and live in the time zone UTC+1, but I don't think that is important in understanding my problem.

  Read the article

• APIPA ip address in server 2003 dns for (same as parent folder record) can anyone suggest why this i

  - by dasko

  have a server 2003 domain controller i have installed active directory integrated dns under the forward lookup zone for domain_name.local i see an APIPA ip address that is set for (same as parent folder) with ip number 169.x.x.x looks like (same as parent folder) Host A 169.x.x.x (apipa subnet range) problem is, from other forums that i have read, that this is due to dual nics and one on that is not getting a dynamic or static ip address BUT... I only have one nic in this server? where could this be coming from and could it mess up other settings or not allowing the DC to be contacted? i am just wondering what symptoms could arise due to the record being there. any help would be greatly appreciated thanks.

  Read the article

• Simple queries occasionally running very slowly

  - by Johan

  I have some very simple queries that occasionally run very slowly. The table viewed_sites has about 10 - 20 rows. Running EXPLAIN ANALYZE always gives a runtime of less than 3 milliseconds. When the query is run automatically (every 10 seconds) it occasionally takes over a second to run. The query: INSERT INTO ga.viewed_sites (site_id) VALUES ('gop2') The table: CREATE TABLE viewed_sites ( site_id character varying(4) NOT NULL, last_viewed timestamp with time zone DEFAULT now() NOT NULL ); The (occasional) log result: 2010-05-24 15:47:55 UTC LOG: duration: 1044.632 ms statement: INSERT INTO ga.viewed_sites (site_id) VALUES ('gop2') It's a horribly vague question, but what could be causing this? I suppose it comes down to CPU, RAM, HDD or some combination of the above. Postgresql 8.3, Ubuntu 8.04 Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz 2 GiB RAM

  Read the article

• Nginx Rate Limiting by Referrer?

  - by SteveEdson

  I've successfully set up rate limiting on IP addresses like so, limit_req_zone $binary_remote_addr zone=one:10m rate=1r/s; But I was wondering if its possible to do the same on referrers? For example, if a site gets placed in an iframe on a third party site, which generates too much traffic to handle. I can't find any nginx variables for the referrer anywhere. Is this possible? Or can the solution be achieved in a different way? Thanks.

  Read the article

• I can not watch any videos on youtube

  - by hamed

  I can not watch any videos on Youtube with any browser ( Chrome 20 , Firefox 13 , IE 8 ). I get this error An error accurred. Please try again later. My OS is Windows 7 (32bit) and the antivirus is zonealarm extreme security 10.1.079.000 . I installed flash player 11 but no success. I exited zone alarm to watch video, but no success again and error is the same. I don't know what's the problem . I searched a lot but didn't find the problem. I'd appreciate any idea.

  Read the article

• Blue screen - BCCode: 7F

  - by Joe

  I've recently bought a refurbished Toshiba Satellite A660 11M and I get the blue screen of death appearing fairly frequently now, and I can't seem to work out why or how to prevent/cure it. Firstly I thought it was due to Zone Alarm from what I read on the net, but then I thought it was a memory issue after it crashed whilst I was running Memtest. But after I ran Memtest a second time, it completed without any errors... Here are my computer specs - Toshiba Satellite A660 11M 500 GB hard disk 4 GB RAM Windows 7 Premium Nvidia GeForce GT 330M and here is more info regarding the crashes I keep getting - Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7600.2.0.0.768.3 Locale ID: 2057 Additional information about the problem: BCCode: 7f BCP1: 0000000000000008 BCP2: 0000000080050033 BCP3: 00000000000006F8 BCP4: FFFFF80003040EC0 OS Version: 6_1_7600 Service Pack: 0_0 Product: 768_1

  Read the article

• Hyper-V Server hvremote.wsf Script - ns lookup for DNS Verification test fails

  - by Vazgen

  I'm trying to connect my Hyper-V Server to a Windows 8 client for remote management. I have: Joined server to WORKGROUP Enabled Remote Management Set the server name Set a static IP Set the DNS servers to my ISPs DNS Servers (same as default DNS Servers on my Windows 8 remote management client) Set the correct time zone Created net user on server (net user /add admin password) Added user to special Administrators group on server (hvremote /add:admin) Granted anonymous dcom access on client using hvremote However, the "ns lookup for DNS verification" fails on both the client and server with the same error: Server: my.isps.server.name.net Address: 111.222.333.1 *** my.isps.server.name.net can't find 192.168.1.3: Non-existent domain Thanks for the help.

  Read the article

• Disk space mismatch on OS X Server (Leopard)

  - by John Gardeniers

  My Nagios system sent me an alert to inform me that the disk space on one of the drives on our OS X server is very low. When I run df /Volumes/Apps/ I get /dev/disk0s3 117209520 114932472 2277048 99% /Volumes/Apps When I run du -c /Volumes/Apps it reports 11489944 total Why might there be such a vast difference? Even more importantly, how do I find the problem and what can I do about it? I'm essentially just a Windows admin, so am well out of my comfort zone here. I use a Mac but I'm not a Mac admin in any real sense of the word.

  Read the article

• Use xrandr to set the absolute position of the screen?

  - by Eli

  I am running XFCE on Fedora 15. I use xrandr to set the secondary display (HDMI-0) to be to the right of the primary (DVI-0), however it is always at the top-right. Is it possible to set the absolute position of the display (e.g. DVI-0 at 0,0 and HDMI-0 at 1920,56), or even set the display to be at the bottom-right? I cannot modify the Xorg.conf, which would be the easy way, as that would mean generating an Xorg.conf file (there is none right now), and I do not know of any automated tool to do that (other than the fglrx driver). The reason why I need this is because I want to extend the XFCE panel accross both monitors, but with there being a 56-pixel-wide dead zone at the bottom I cannot do this.

  Read the article

• Configuring subdomains for a machine (Win2k8) in a lan

  - by RMS

  I am currently setting up a windows 2008 server to host a website with multiple subdomains, all accessible only within the lan. also, there is no active directory. what I did is : 1 - computer name : 'web' 2 - in IIS, I added a site binding as 'site1.web' to the default web site 3 - added DNS role to the server 4 - added 'web' as principal zone in direct lookup zones (default options) 5 - added CNAME 'site1' From a client machine, in tcpip config I added the ip address of 'web' to the DNS list in addition to the ISP DNS. (client machine ip is from DHCP) Now browsing to 'http://web' or 'http://site1.web' works correctly. My question is, is it possible throught additional steps in the server to have the websites accessible without requiring the DNS config in all the client machines ? thanks in advance

  Read the article

• Can I buy a wireless access point that also acts as a DNS nameserver?

  - by Brabster

  Hi, I was wondering if I buy a wireless access point/router that also acts as a DNS nameserver for DHCP clients. I can see the hostnames of my home devices in the DHCP clients table of the router I have, it doesn't seem like a great leap of the imagination to have a local nameserver on there, something like hostname.home that automatically publishes those entries to a local zone. But - I can't find one that does that. Is there a reason why this shouldn't/can't be done? Or is my Google-Fu just weak? Cheers,

  Read the article

• Location Services are always disabled in Mac OS X Lion

  - by rplusg

  A simple location services program was working fine on my machine and suddenly stopped working. Upon further exploring the problem, I realized that some process has disabled location services in System Preferences » Security & Privacy » Privacy. I checked Enable Location Services, but again it got disabled automatically. After some research I found that it's not just my program, even built-in system functions are also failing because of this problem for example System Preferences » Date & Time » Time Zone failed to get the current location. Every time I check Enable Location Services, I see the following error in the console logs: 16/10/12 11:23:15.636 AM [0x0-0x42042].com.apple.systempreferences: ERROR,Time,372059595.636,Function,"CLInternalSetLocationServicesEnabled",CLInternalSetLocationServicesEnabled failed 16/10/12 11:23:15.638 AM [0x0-0x42042].com.apple.systempreferences: STACK,Time,372059595.636,1 CoreLocation 0x00007fff8f9957be CLInternalSetLocationServicesEnabled + 110 Notes: WiFi is on I didn't install iOS Simulator I use Xcode Version 4.5 (4G182) I use Boot Camp and made my MacBook Pro dual boot (Mac OS X Lion and Windows 7) I do only Mac development but not iOS

  Read the article

• Point example.com to webserver in DNS record

  - by ggstevens

  I have a Mac Mini Server (named Server) with the following DNS setup Primary Zone: example.com mysql-host.example.com machine (10.0.0.101) server.example.com machine (10.0.0.100) server.example.com nameserver (10.0.0.100) www.example.com machine (10.0.0.102) www.example.com is a linux box with Apache. How do I get both example.com and www.example.com to work. Right now, I can view my website with www.example.com only. I know there's nothing that points example.com to the IP, but when I create a machine record without a hostname I get an error (This machine record cannot be created without a host name.).

  Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >