Search Results

Search found 11077 results on 444 pages for 'ip'.

Page 31/444 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

  • IP Masquerade and forwarding

    - by poelinca
    Hi all , i got a dedicated server running ubuntu server 10.10 with 3 ip adresses on the same eth card ( example: eth0 192.168.0.1 , eth0:0 188.78.45.0 , eth0:1 ... ) with a 3 virtual machines running ( virtualization technologi used is lxc but i don't think this matters too much ) . Now i need to redirect all ports opened ( using ufw to close/open ports ) from the ip 188.78.54.0 ( eth0:0 ) to a virtual machine ip ( let's say for example 192.168.2.3 ) , all requests made by a virtual machine should be redirected back to the virtual machine that made the request ( in this example 192.168.2.3 ) . Lets say the second vm has the ip 192.168.2.4 now i need to redirect all opened ports to from eth0:1 to this ip and viceversa . And so on and so on , what are the iptables/ufw rules to get this done ? and where to save them ( witch config file ) so they stay the same after reboot . In a few words redirect all requests comming from/to eth0:0 to a certan ip , all requests comming from/to eth0:1 to another ip ... Remember i'm saying all ports opened becouse they might be dynamicly changed . p.s. please excuse my bad english

    Read the article

  • iptables, forward traffic for ip not active on the host itself

    - by gucki
    I have kvm guest which's netword card is conntected to the host using a tap device. The tap device is part of a bridge on the host together with eth0 so it can access the public network. So far everything works, the guest can access the public network and it can be accessed from the public network. Now the kvm process on the host provides a vnc server for the guest which listens on 127.0.0.1:5901 on the host. Is there any way to make this vnc server accessible by the ip address which the guest is using (ex. 192.168.0.249), without interrupting the guest from using the same ip (port 5901 is not used by the guest)? It should also work when the guest is not using any ip address at all. So basically I just want to fake IP xx is on the host and only answer/ forward traffic to port 5901 to the host itself. I tried using this NAT rule on the host, but it doesn't work. Ip forwarding is enabled at the host. iptables -t nat -A PREROUTING -p tcp --dst 192.168.0.249 --dport 5901 -j DNAT --to-destination 127.0.0.1:5901 I assume this is because the IP 192.168.0.249 is not not bound to any interfaces and so no ARP requests for it get answered and so no packets for this IP arrive at the host. How can make it work? :)

    Read the article

  • iptables not allowing mysql connections to aliased ips?

    - by Curtis
    I have a fairly simple iptables firewall on a server that provides MySQL services, but iptables seems to be giving me very inconsistent results. The default policy on the script is as follows: iptables -P INPUT DROP I can then make MySQL public with the following rule: iptables -A INPUT -p tcp --dport 3306 -j ACCEPT With this rule in place, I can connect to MySQL from any source IP to any destination IP on the server without a problem. However, when I try to restrict access to just three IPs by replacing the above line with the following, I run into trouble (xxx=masked octect): iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.XXX.XXX.184 -j ACCEPT iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.XXX.XXX.196 -j ACCEPT iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.XXX.XXX.251 -j ACCEPT Once the above rules are in place, the following happens: I can connect to the MySQL server from the .184, .196 and .251 hosts just fine as long as am connecting to the MySQL server using it's default IP address or an IP alias in the same subnet as the default IP address. I am unable to connect to MySQL using IP aliases that are assigned to the server from a different subnet than the server's default IP when I'm coming from the .184 or .196 hosts, but .251 works just fine. From the .184 or .196 hosts, a telnet attempt just hangs... # telnet 209.xxx.xxx.22 3306 Trying 209.xxx.xxx.22... If I remove the .251 line (making .196 the last rule added), the .196 host still can not connect to MySQL using IP aliases (so it's not the order of the rules that is causing the inconsistent behavior). I know, this particular test was silly as it shouldn't matter what order these three rules are added in, but I figured someone might ask. If I switch back to the "public" rule, all hosts can connect to the MySQL server using either the default or aliased IPs (in either subnet): iptables -A INPUT -p tcp --dport 3306 -j ACCEPT The server is running in a CentOS 5.4 OpenVZ/Proxmox container (2.6.32-4-pve). And, just in case you prefer to see the problem rules in the context of the iptables script, here it is (xxx=masked octect): # Flush old rules, old custom tables /sbin/iptables --flush /sbin/iptables --delete-chain # Set default policies for all three default chains /sbin/iptables -P INPUT DROP /sbin/iptables -P FORWARD DROP /sbin/iptables -P OUTPUT ACCEPT # Enable free use of loopback interfaces /sbin/iptables -A INPUT -i lo -j ACCEPT /sbin/iptables -A OUTPUT -o lo -j ACCEPT # All TCP sessions should begin with SYN /sbin/iptables -A INPUT -p tcp ! --syn -m state --state NEW -j DROP # Accept inbound TCP packets (Do this *before* adding the 'blocked' chain) /sbin/iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow the server's own IP to connect to itself /sbin/iptables -A INPUT -i eth0 -s 208.xxx.xxx.178 -j ACCEPT # Add the 'blocked' chain *after* we've accepted established/related connections # so we remain efficient and only evaluate new/inbound connections /sbin/iptables -N BLOCKED /sbin/iptables -A INPUT -j BLOCKED # Accept inbound ICMP messages /sbin/iptables -A INPUT -p ICMP --icmp-type 8 -j ACCEPT /sbin/iptables -A INPUT -p ICMP --icmp-type 11 -j ACCEPT # ssh (private) /sbin/iptables -A INPUT -p tcp --dport 22 -m state --state NEW -s xxx.xxx.xxx.xxx -j ACCEPT # ftp (private) /sbin/iptables -A INPUT -p tcp --dport 21 -m state --state NEW -s xxx.xxx.xxx.xxx -j ACCEPT # www (public) /sbin/iptables -A INPUT -p tcp --dport 80 -j ACCEPT /sbin/iptables -A INPUT -p tcp --dport 443 -j ACCEPT # smtp (public) /sbin/iptables -A INPUT -p tcp --dport 25 -j ACCEPT /sbin/iptables -A INPUT -p tcp --dport 2525 -j ACCEPT # pop (public) /sbin/iptables -A INPUT -p tcp --dport 110 -j ACCEPT # mysql (private) /sbin/iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.xxx.xxx.184 -j ACCEPT /sbin/iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.xxx.xxx.196 -j ACCEPT /sbin/iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.xxx.xxx.251 -j ACCEPT Any ideas? Thanks in advance. :-)

    Read the article

  • Accessing SQL Server using an IP Address and Port Number ... Help!

    - by Mike
    I need to access an SQL Server that is on a machine behind a firewall and you access this machine using an ip address like 95.95.95.33:6930 (not the real ip address) ... But, you get my point that by accessing 95.95.95.33 on port 6930, the firewall routes the requests to that particular machine ... My question is ... How do you construct a connection string to access the machine at address 95.95.95.33:6930 and then further access the SQL Server on port 1433 or maybe a different port like 8484 ??? Thanks Mike

    Read the article

  • In TCPServer (Ruby) how can i get the IP/MAC from the client?

    - by a0rtega
    Hi, i want to get the IP Address of the client in a TCPServer in Ruby. And (if it is possible) the MAC Address. For example, a Time Server in Ruby, see the comment. tcpserver = TCPServer.new("", 80) if tcpserver puts "Listening" loop do socket = tcpserver.accept if socket Thread.new do puts "Connected from" + # HERE! How can i get the IP Address from the client? socket.write(Time.now.to_s) socket.close end end end end Thank you very much!

    Read the article

  • C# - How to detect all IP addresses from a LAN?

    - by SAMIR BHOGAYTA
    string strHostName = string.Empty; cmbIPAddress.Items.Clear(); // Getting Ip address of local machine... // First get the host name of local machine. strHostName = Dns.GetHostName(); // Then using host name, get the IP address list.. IPHostEntry ipEntry = Dns.GetHostByName(strHostName); IPAddress[] iparrAddr = ipEntry.AddressList; if (iparrAddr.Length 0) { for (int intLoop = 0; intLoop cmbIPAddress.Items.Add(iparrAddr[intLoop].ToString()); }

    Read the article

  • How to get ip address programactically on Debian based system?

    - by gc
    I'm trying to retrieve the ip address of the local machine in my program. The OS running is Ubuntu 8.10. I tried using gethostname() and gethostbyname to do it. All I can get is 127.0.1.1. I learned that it seems to be a Debian thing: This thread explained it. The content of my /etc/hosts file is also: 127.0.0.1 localhost 127.0.1.1 mymachine In this case, is there any other way to programactically (prefer C or C++) to get the ip address without modifying the system file on the machine? Thanks in advance. g.c.

    Read the article

  • How much effort does it take to spoof an Ip Address in a call to a webservice?

    - by Rory Becker
    I don't want to know how... Just how complicated.... I'm thinking of securing a webservice or 2 based on the incoming client ipaddress of the caller. Is this in any way secure? Surely if the IPaddress was being spoofed then the result would have to be sent back to the address that was being spoofed and therefore not reach the spoofer? Update: Ok so from what I can tell.... I should create a Gettoken() method which checks the IPaddress and passes out a cryptographically significant token with a timeout to any valid IP address. This is then required by any other method before any kind of side effect is allowed. Since an Attacker can't (likely) get the token without having a valid IP, he will be unable to validly call any of my "dangerous" webmethods ?

    Read the article

  • GRE keepalive with Linux and RouterOS

    - by eri
    I have a Linux host and couple of routerboadrs. I created a GRE tunnel, but Linux does not answer keepalive packages. Then router mark gre connection as unreachable, so I cant send to Linux host from router subnet. If linux sends something into tunnel (ping, etc.) - RouterOS mark connection as reacheble. Second and next packages routed nicely until one minute idle (no traffic). Tunnel in linux a make in this way: remote=x.x.x.x dev=gre21 network=10.21.0.0/16 ip tunnel add ${dev} mode gre remote ${remote} ttl 255 ip addr add 172.16.1.1/24 peer 172.16.1.21 dev ${dev} ip link set ${dev} up ip route add ${network} dev ${dev} And ip l: 14: gre21: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1476 qdisc noqueue state UNKNOWN link/gre 0.0.0.0 peer 109.60.170.15 How to set state "running"? How to keep alive tunnel? Ping in cron?

    Read the article

  • VPN, Tunneling to hide 'real IP' through my proxy server while showing the client IP on 'real' server side

    - by mickula
    I would like to hide my 'main server' behind the load balancer, call it 'proxy server' Although I use some closed-source software on 'main server' and it needs the client IP address to operate well. When I'm setting up some VPN connection, in that software it displays the IP address of my 'proxy server'. Is there any option to set up such tunneling or vpn to: not reveal IP of 'main server' show the IP of 'client' in 'application' on 'main server' I will be grateful for all your replies and ideas.

    Read the article

  • Make Apache to listen in multiple IPs

    - by Enrique Becerra
    Hi I'm in a big LAN, which is behind a proxy/firewall I'm working with an apache/php/mysql application, which is hosted in a small server besides my workstation. This server is connected to the LAN also and is behind the proxy: The server has a local IP assigned: 10.64.x.x Also, this server has a public IP assigned (or redirected from within the proxy/firewall) which is: 200.41.x.x I can't access public IP from LAN, but I can ping to the public IP from outside the building How should I configure Apache to listen also for public IP and open the 80 port for people accessing from outside the building?. It is set now to Listen 10.64.x.x:80 Thanks a lot in advance,

    Read the article

  • Network - Routers conflicting in my subnet

    - by Richard
    I have a router whose IP is 192.168.1.1 and I be experiencing conflict with another router on my subnet (which probably has 192.168.1.1 as IP too). I think when it tries to connect to the network, eventually taking the place of my router because when I try to access the config page of my router, which appears to me is a config page from another router that is not mine. Do you have any solution except to change the IP of my router to an IP not common? As I have set up the exclusivity that only my IP router? I work with dynamic IPs (wireless networking) and static (for wired). How do I? I just wanna to do some setting in my router that affects all other, so that doesn't conflicts anymore.

    Read the article

  • ftp connection problem, vsftp server, active mode

    - by Mark Szente
    I have a server that runs vsftpd to handle ftp connections. One of my users have a notebook with Total Commander and WinSCP installed. Both ftp clients fail right after the connection is established to the server and it tries to download the directory listing without any particular error message. The weird thing is: the notebook works perfectly ok with other ftp servers. My ftp server also works well with other clients. In fact, this user also has a pc running on the same LAN as the notebook and the pc works well with the ftp server. We use active ftp connection mode. Passive mode works well but is not an option at this point. I would post more technical details but I don't even know what this problem is related to. Anyway, below is the server side tcpdump for the failed connection attempt. There's no further communication between the client and the server after the last line of log. Thank you very much for any hint! 23:39:24.514852 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: S 1314489715:1314489715(0) win 65535 <mss 1460,nop,wscale 3,nop,nop,sackOK> 23:39:24.514896 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: S 2633658883:2633658883(0) ack 1314489716 win 5840 <mss 1460,nop,nop,sackOK,nop,wscale 2> 23:39:24.520842 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: . ack 1 win 62500 23:39:24.523803 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 1:21(20) ack 1 win 1460 23:39:24.546858 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 1:15(14) ack 21 win 62497 23:39:24.546902 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: . ack 15 win 1460 23:39:24.547247 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 21:55(34) ack 15 win 1460 23:39:24.762806 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: . ack 55 win 62493 23:39:30.415011 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 15:28(13) ack 55 win 62493 23:39:30.454116 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: . ack 28 win 1460 23:39:31.036283 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 55:78(23) ack 28 win 1460 23:39:31.053018 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 28:34(6) ack 78 win 62490 23:39:31.053042 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: . ack 34 win 1460 23:39:31.053268 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 78:97(19) ack 34 win 1460 23:39:31.068969 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 34:40(6) ack 97 win 62488 23:39:31.069148 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 97:112(15) ack 40 win 1460 23:39:31.069179 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 112:119(7) ack 40 win 1460 23:39:31.076981 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: . ack 119 win 62485 23:39:31.077010 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 119:177(58) ack 40 win 1460 23:39:31.114979 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 40:45(5) ack 177 win 62478 23:39:31.115164 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 177:186(9) ack 45 win 1460 23:39:31.180966 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 45:53(8) ack 186 win 62476 23:39:31.181066 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 186:216(30) ack 53 win 1460 23:39:31.213065 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 53:80(27) ack 216 win 62473 23:39:31.213180 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 216:267(51) ack 80 win 1460 23:39:31.251086 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 80:86(6) ack 267 win 62466 23:39:31.251498 IP 195.70.xx.xx.20 > 62.201.xx.xx.5001: S 2640780713:2640780713(0) win 5840 <mss 1460,sackOK,timestamp 2054371220 0,nop,wscale 2> 23:39:31.290979 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: . ack 86 win 1460 23:39:34.251489 IP 195.70.xx.xx.20 > 62.201.xx.xx.5001: S 2640780713:2640780713(0) win 5840 <mss 1460,sackOK,timestamp 2054374220 0,nop,wscale 2> 23:39:40.249625 IP 195.70.xx.xx.20 > 62.201.xx.xx.5001: S 2640780713:2640780713(0) win 5840 <mss 1460,sackOK,timestamp 2054380220 0,nop,wscale 2> 23:39:43.695108 IP 195.70.xx.xx.21 > 62.201.xx.xx.1057: P 2280716551:2280716588(37) ack 3838413728 win 5840 23:39:52.248791 IP 195.70.xx.xx.20 > 62.201.xx.xx.5001: S 2640780713:2640780713(0) win 5840 <mss 1460,sackOK,timestamp 2054392220 0,nop,wscale 2> 23:40:16.245159 IP 195.70.xx.xx.20 > 62.201.xx.xx.5001: S 2640780713:2640780713(0) win 5840 <mss 1460,sackOK,timestamp 2054416221 0,nop,wscale 2> 23:40:29.853685 IP 195.70.xx.xx.21 > 62.201.xx.xx.1057: FP 37:51(14) ack 1 win 5840 23:40:31.241951 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 267:304(37) ack 86 win 1460 23:40:31.381708 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: . ack 304 win 62462

    Read the article

  • how IP ban system works

    - by Remus Rigo
    hi all Can anyone tell me how the IP ban system works. I have Dynamic IP, every time i start my PC I have a different IP. I want to know how a site (like a chat system) knows my IP and it keeps me banned... thanks

    Read the article

  • Cloud services, Public IPs and SIP

    - by Guido N
    I'm trying to run a custom SIP software (which uses JAIN SIP 1.2) on a cloud box. What I'd really like is to have a real public IP aka which is listed by "ifconfig -a" command. This is because atm I don't want to write additional SIP code / add a SIP proxy in order to manage private IP addresses / address translation. I gave Amazon EC2 a go, but as reported here http://stackoverflow.com/questions/10013549/sip-and-ec2-elastic-ips it's not fit for purpose (they do a 1:1 NAT translation between the private IP of the box and its Elastic IP). Does anyone know of a cloud service that provides real static public IP addresses?

    Read the article

  • ftp connection problem, vsftp server, active mode

    - by Mark Szente
    I have a server that runs vsftpd to handle ftp connections. One of my users have a notebook with Total Commander and WinSCP installed. Both ftp clients fail right after the connection is established to the server and it tries to download the directory listing with the following error message: Timeout detected. Could not retrieve directory listing PORT command successful. Consider using PASV. Error listing directory '/'. The weird thing is: the notebook works perfectly ok with other ftp servers. My ftp server also works well with other clients. In fact, this user also has a pc running on the same LAN as the notebook and the pc works well with the ftp server. We use PORT ftp connection mode. Passive mode works well but is not an option at this point. I would post more technical details but I don't even know what this problem is related to. Anyway, below is the server side tcpdump for the failed connection attempt. There's no further communication between the client and the server after the last line of log. Thank you very much for any hint! 23:39:24.514852 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: S 1314489715:1314489715(0) win 65535 <mss 1460,nop,wscale 3,nop,nop,sackOK> 23:39:24.514896 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: S 2633658883:2633658883(0) ack 1314489716 win 5840 <mss 1460,nop,nop,sackOK,nop,wscale 2> 23:39:24.520842 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: . ack 1 win 62500 23:39:24.523803 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 1:21(20) ack 1 win 1460 23:39:24.546858 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 1:15(14) ack 21 win 62497 23:39:24.546902 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: . ack 15 win 1460 23:39:24.547247 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 21:55(34) ack 15 win 1460 23:39:24.762806 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: . ack 55 win 62493 23:39:30.415011 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 15:28(13) ack 55 win 62493 23:39:30.454116 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: . ack 28 win 1460 23:39:31.036283 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 55:78(23) ack 28 win 1460 23:39:31.053018 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 28:34(6) ack 78 win 62490 23:39:31.053042 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: . ack 34 win 1460 23:39:31.053268 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 78:97(19) ack 34 win 1460 23:39:31.068969 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 34:40(6) ack 97 win 62488 23:39:31.069148 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 97:112(15) ack 40 win 1460 23:39:31.069179 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 112:119(7) ack 40 win 1460 23:39:31.076981 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: . ack 119 win 62485 23:39:31.077010 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 119:177(58) ack 40 win 1460 23:39:31.114979 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 40:45(5) ack 177 win 62478 23:39:31.115164 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 177:186(9) ack 45 win 1460 23:39:31.180966 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 45:53(8) ack 186 win 62476 23:39:31.181066 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 186:216(30) ack 53 win 1460 23:39:31.213065 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 53:80(27) ack 216 win 62473 23:39:31.213180 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 216:267(51) ack 80 win 1460 23:39:31.251086 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: P 80:86(6) ack 267 win 62466 23:39:31.251498 IP 195.70.xx.xx.20 > 62.201.xx.xx.5001: S 2640780713:2640780713(0) win 5840 <mss 1460,sackOK,timestamp 2054371220 0,nop,wscale 2> 23:39:31.290979 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: . ack 86 win 1460 23:39:34.251489 IP 195.70.xx.xx.20 > 62.201.xx.xx.5001: S 2640780713:2640780713(0) win 5840 <mss 1460,sackOK,timestamp 2054374220 0,nop,wscale 2> 23:39:40.249625 IP 195.70.xx.xx.20 > 62.201.xx.xx.5001: S 2640780713:2640780713(0) win 5840 <mss 1460,sackOK,timestamp 2054380220 0,nop,wscale 2> 23:39:43.695108 IP 195.70.xx.xx.21 > 62.201.xx.xx.1057: P 2280716551:2280716588(37) ack 3838413728 win 5840 23:39:52.248791 IP 195.70.xx.xx.20 > 62.201.xx.xx.5001: S 2640780713:2640780713(0) win 5840 <mss 1460,sackOK,timestamp 2054392220 0,nop,wscale 2> 23:40:16.245159 IP 195.70.xx.xx.20 > 62.201.xx.xx.5001: S 2640780713:2640780713(0) win 5840 <mss 1460,sackOK,timestamp 2054416221 0,nop,wscale 2> 23:40:29.853685 IP 195.70.xx.xx.21 > 62.201.xx.xx.1057: FP 37:51(14) ack 1 win 5840 23:40:31.241951 IP 195.70.xx.xx.21 > 62.201.xx.xx.2241: P 267:304(37) ack 86 win 1460 23:40:31.381708 IP 62.201.xx.xx.2241 > 195.70.xx.xx.21: . ack 304 win 62462

    Read the article

  • Keep source IP after NAT

    - by John Miller
    Until today I used a cheapy router so I can share my internet connection and keep a webserver online too, while using NAT. Users IP ($_SERVER['REMOTE_ADDR']) was fine, I was seeing class A IPs of users. But as traffic grown up everyday, I had to install a Linux Server (Debian) to share my Internet Connection, because my old router couldn't keep the traffic anymore. I shared the internet via IPTABLES using NAT, but now, after forwarding port 80 to my webserver, now instead of seeing real users IP, I see my Gateway IP (Linux Internal IP) as any user IP Address. How to solve this issue? I edited my post, so I can paste the rules I'm currently using. #!/bin/sh #I made a script to set the rules #I flush everything here. iptables --flush iptables --table nat --flush iptables --delete-chain iptables --table nat --delete-chain iptables -F iptables -X # I drop everything as a general rule, but this is disabled under testing # iptables -P INPUT DROP # iptables -P OUTPUT DROP # these are the loopback rules iptables -A INPUT -i lo -j ACCEPT iptables -A OUTPUT -o lo -j ACCEPT # here I set the SSH port rules, so I can connect to my server iptables -A INPUT -p tcp --sport 513:65535 --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp --sport 22 --dport 513:65535 -m state --state ESTABLISHED -j ACCEPT # These are the forwards for 80 port iptables -t nat -A PREROUTING -p tcp -s 0/0 -d xx.xx.xx.xx --dport 80 -j DNAT --to 192.168.42.3:80 iptables -t nat -A POSTROUTING -o eth0 -d xx.xx.xx.xx -j SNAT --to-source 192.168.42.3 iptables -A FORWARD -p tcp -s 192.168.42.3 --sport 80 -j ACCEPT # These are the forwards for bind/dns iptables -t nat -A PREROUTING -p udp -s 0/0 -d xx.xx.xx.xx --dport 53 -j DNAT --to 192.168.42.3:53 iptables -t nat -A POSTROUTING -o eth0 -d xx.xx.xx.xx -j SNAT --to-source 192.168.42.3 iptables -A FORWARD -p udp -s 192.168.42.3 --sport 53 -j ACCEPT # And these are the rules so I can share my internet connection iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -A FORWARD -i eth0:1 -j ACCEPT If I delete the MASQUERADE part, I see my real IP while echoing it with PHP, but I don't have internet. How to do, to have internet and see my real IP while ports are forwarded too? ** xx.xx.xx.xx - is my public IP. I hid it for security reasons.

    Read the article

  • Using iptables to forward traffic destined for specific ip via specific interface

    - by shapeshifter
    I want to forward traffic destined for a specific ip from my internal network via a specific interface. I have two interfaces which are currently load balanced. I need all requests for a certain ip to go out via eth0 otherwise my external ip changes and sessions are dropped. eg. all requests from 10.1.1.1/24 to ip 11.22.33.44 on port 443 must go out via interface eth0. How can I do this with iptables?

    Read the article

  • Windows SMTP Server Outbound IP

    - by Josh
    I have a Windows 2008 server that has three IP bound to the NIC. I can select which IP Windows SMTP listens to, but I want to also set the IP address used when mail is sent. Where would I set which IP to use when sending email?

    Read the article

  • HTTP: can GET and POST requests from a same machine come from different IPs?

    - by NoozNooz42
    I'm pretty sure I remember reading --but cannot find back the links anymore-- about this: on some ISP (including at least one big ISP in the U.S.) it is possible to have a user's GET and POST request appearing to come from different IPs. (note that this is totally programming related, and I'll give an example below) I'm not talking about having your IP adress dynamically change between two requests. I'm talking about this: IP 1: 123.45.67.89 IP 2: 101.22.33.44 The same user makes a GET, then a POST, then a GET again, then a POST again and the servers see this: - GET from IP 1 - POST from IP 2 - GET from IP 1 - POST from IP 2 So altough it's the same user, the webserver sees different IPs for the GET and the POSTs. Surely seen that HTTP is a stateless protocol this is perfectly legit right? I'd like to find back the explanation as to how/why certain ISP have their networks configured such that this may happen. I'm asking because someone asked me to implement the following IP filter and I'm pretty sure it is fundamentally broken code (breaking havoc for at least one major american ISP users). Here's a Java servlet filter that is supposed to protect against some attacks. The reasoning is that: "For any session filter checks that IP address in the request is the same that was used when session was created. So in this case session ID could not be stolen for forming fake sessions." http://www.servletsuite.com/servlets/protectsessionsflt.htm However I'm pretty sure this is inherently broken because there are ISPs where you may see GET and POST coming from different IPs. Any info on this subject is very welcome.

    Read the article

  • ddclient - wont update Invalid Keyword for 'ip' =

    - by stueng
    /etc/ddclient.conf use=web, web=checkip.dyndns.org/, web-skip='IP Address' protocol=easydns ssl=yes server=members.easydns.com login=stueng password='****' home.***.** /var/log/syslog Jun 4 13:02:34 XBMCuntu ddclient[10554]: WARNING: file /var/cache/ddclient/ddclient.cache, line 3: Invalid Value for keyword 'ip' = '' Jun 4 13:02:34 XBMCuntu ddclient[10554]: WARNING: skipping update of home.***.** from <nothing> to 90.193.*.*. Jun 4 13:02:34 XBMCuntu ddclient[10554]: WARNING: last updated <never> but last attempt on Mon Jun 4 13:01:57 2012 failed. Jun 4 13:02:34 XBMCuntu ddclient[10554]: WARNING: Wait at least 5 minutes between update attempts. Help?

    Read the article

  • Sharing one static ip for both ftp and www service

    - by user11496
    Trying to figure out how to update the Zone record and configure webserver so that one application on the webserver is accessible by public. I'm completely not good at NS/DNS/NAT/firewall/routing/port forwarding/networking etc. "faraday" is the intranet name. Everyone within local network can access all applications hosted on "faraday". Hostname for webserver is "www", FTP server is "ftpserver". Both servers running RHEL4 OS. The goal is to allow anyone outside the company network (public) to access only one of the many applications on "faraday". Hope somebody can help me with some of the questions below, if not all. From zoneedit record, the static IP is used by FTP now. Can I use the same existing static IP - 219.95.10.100, for web service? Currently anyone who enter "http://www.abc.com.my" will be directed to "http://www.abc.com". I don't want this to change. Currently, no one else, except employee on local network, can access "faraday" web pages. How to configure so that when anyone type "http://thisapp.abc.com.my" on their web browser, the url will lead them to "http://faraday/thisapp" (application folder is /var/www/html/thisapp on RHEL4 web server). If possible, how to set the URL will continue to show "http://thisapp.abc.com.my" instead of "http://faraday/thisapp" How to limit/restrict user (those who are not from local network) so they only have access to "http://thisapp.abc.com.my", but not "http://faraday" or "http://faraday/anotherapp", etc. What's the configuration changes needed in /etc/httpd.conf on web server? Company domain name is "abc.com.my". Following is the zone records on www.zoneedit.com. Subdomain Type IP sdsl A 219.95.10.100 ftp CNAME sdsl.abc.com.my @ NS ns3.zoneedit.com @ NS ns7.zoneedit.com WebForward record: New Domain Destination Cloaked www.abc.com.my http://www.abc.com N On my local DNS server, there are 2 zone files: abc.com.my and pnmy.abc.com. > cat abc.com.my.zone ftp CNAME ftp.pnmy.abc.com. sdsl A 219.95.10.100 > cat pnmy.abc.com.zone ftp CNAME ftpserver ftpserver A 172.16.5.1 faraday CNAME www www A 172.16.5.2

    Read the article

  • Setup static Ip in virtual box

    - by Haris
    I have as issue i am Ubuntu desktop and i have installed virtual-box(4.1) ISSUE:- Ubuntu 11.10 desktop is my host operating system and on Virtual-box i installed Ubuntu server selecting bridge adapter as my first adapter by default my network interfaces file get ip address by dhcp server but i want to setup an static ip. by changing network interface file to static and gave some static ips my internet stop working on guest operating system(virtual-box - Ubuntu server). Can any one help me how can i setup static on virtual-box so that my internet will work too on my guest operating system. thanks in advance.

    Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >