Search Results

Search found 47090 results on 1884 pages for 'linux ubuntu customize'.

Page 31/1884 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

  • Packet loss with Broadcom wireless and Ubuntu

    - by stevemegson
    I have a machine with Ubuntu 9.04 and a Broadcom BCM4306 wireless card which has been running quite happily for many months with the b43legacy driver that's suggested by Hardware Drivers. Suddenly, I'm now seeing crippling packet loss, varying between 30% and 90% when pinging the router. My WinXP machine is still quite happy even when sat next to the Ubuntu box, so I assume that it's not some new source of interference. What else is likely to have changed? How should I go about diagnosing and fixing this?

    Read the article

  • Grub install fails while installing Ubuntu on RAID

    - by Warren Pena
    I'm trying to install Ubuntu 9.10 using the alternate install CD, but I keep getting stuck. I get through the first few steps of the install process easily enough (telling it what partition to install to, what user ID and password to create, time zone, etc.), but then it suddenly pops up a menu asking me what the next step in the install process is. It has "Install the GRUB boot loader on a hard disk" selected by default. When I select it, it goes to another screen with a progress bar and a label "Installing the 'grub2' package." The progress bar gets to 16%, and then I get returned to the same menu. No matter how many times I try to install grub, the exact same thing happens. I'm trying to install Ubuntu on a two disk RAID-1 array. This is the RAID card I'm using: http://www.siig.com/ViewProduct.aspx?pn=SC-SAER12-S2. Any ideas what may be causing this to happen and how I can fix it? Thanks!

    Read the article

  • Ubuntu Server 12.04 LTS on Hyper-V 2012

    - by user137533
    I have the following scenario: Hyper-V 2012 server core installation. On top of this i created a virtual machine on which i tried installing Ubuntu Server 12.04 which should not have any compatibility issues according to what Microsoft and Ubuntu are saying (although it is not officially supported). I start, run the installation and everything is ok, no problems detecting the network device or the hard drive (unlike debian which didn't even detect the hard drive). Once the installation is complete it asks me to reboot, it unmounts the "dvd drive" and reboots. Once it tries to start again i get the following error: Boot failure. Reboot and Select proper Boot device or Insert Boot Media in the selected Boot device. It seems to not be booting up from the virtual hard drive. The hard drive is set up in SCSI mode, nothing mounted on the IDE controller (no iso image or anything else. Does anyone have any ideas on what i can do to solve this?

    Read the article

  • Ubuntu VM Guest - Samba Service Not Accessible from VM Host via Hostname

    - by phalacee
    I have a Windows 7 Workstation with a Ubuntu 10.10 VM running in Virtual Box 3.2.12 r68302. I recently updated Samba and winbind, and since the update, I am unable to access the machine via it's hostname (\mystique) from the VM Host. I can access it by the "Host-only" IP (\192.168.56.101) and the DHCP Assigned IP address (\10.1.1.20) and I can connect to the webserver on the machine via it's hostname (http://mystique/). As stated, accessing this machine via it's hostname worked fine prior to the update, but has since stopped working. I have added the hostname to the smb.conf for the netbios name, to no avail. My smb.conf [global] section looks like this: workgroup = NETWORK netbios name = Mystique server string = %h server (Samba, Ubuntu) dns proxy = no log file = /var/log/samba/log.%m max log size = 1000 syslog = 0 panic action = /usr/share/samba/panic-action %d encrypt passwords = true passdb backend = tdbsam obey pam restrictions = yes unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes map to guest = bad user usershare allow guests = yes

    Read the article

  • Persuading openldap to work with SSL on Ubuntu with cn=config

    - by Roger
    I simply cannot get this (TLS connection to openldap) to work and would appreciate some assistance. I have a working openldap server on ubuntu 10.04 LTS, it is configured to use cn=config and most of the info I can find for TLS seems to use the older slapd.conf file :-( I've been largely following the instructions here https://help.ubuntu.com/10.04/serverguide/C/openldap-server.html plus stuff I've read here and elsewhere - which of course could be part of the problem as I don't totally understand all of this yet! I have created an ssl.ldif file as follows; dn:cn=config add: olcTLSCipherSuite olcTLSCipherSuite: TLSV1+RSA:!NULL add: olcTLSCRLCheck olcTLSCRLCheck: none add: olcTLSVerifyClient olcTLSVerifyClient: never add: olcTLSCACertificateFile olcTLSCACertificateFile: /etc/ssl/certs/ldap_cacert.pem add: olcTLSCertificateFile olcTLSCertificateFile: /etc/ssl/certs/my.domain.com_slapd_cert.pem add: olcTLSCertificateKeyFile olcTLSCertificateKeyFile: /etc/ssl/private/my.domain.com_slapd_key.pem and I import it using the following command line ldapmodify -x -D cn=admin,dc=mydomain,dc=com -W -f ssl.ldif I have edited /etc/default/slapd so that it has the following services line; SLAPD_SERVICES="ldap:/// ldapi:/// ldaps:///" And everytime I'm making a change, I'm restarting slapd with /etc/init.d/slapd restart The following command line to test out the non TLS connection works fine; ldapsearch -d 9 -D cn=admin,dc=mydomain,dc=com -w mypassword \ -b dc=mydomain,dc=com -H "ldap://mydomain.com" "cn=roger*" But when I switch to ldaps using this command line; ldapsearch -d 9 -D cn=admin,dc=mydomain,dc=com -w mypassword \ -b dc=mydomain,dc=com -H "ldaps://mydomain.com" "cn=roger*" This is what I get; ldap_url_parse_ext(ldaps://mydomain.com) ldap_create ldap_url_parse_ext(ldaps://mydomain.com:636/??base) ldap_sasl_bind ldap_send_initial_request ldap_new_connection 1 1 0 ldap_int_open_connection ldap_connect_to_host: TCP mydomain.com:636 ldap_new_socket: 3 ldap_prepare_socket: 3 ldap_connect_to_host: Trying 127.0.0.1:636 ldap_pvt_connect: fd: 3 tm: -1 async: 0 TLS: can't connect: A TLS packet with unexpected length was received.. ldap_err2string ldap_sasl_bind(SIMPLE): Can't contact LDAP server (-1) Now if I check netstat -al I can see; tcp 0 0 *:www *:* LISTEN tcp 0 0 *:ssh *:* LISTEN tcp 0 0 *:https *:* LISTEN tcp 0 0 *:ldaps *:* LISTEN tcp 0 0 *:ldap *:* LISTEN I'm not sure if this is significant as well ... I suspect it is; openssl s_client -connect mydomain.com:636 -showcerts CONNECTED(00000003) 916:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:s23_lib.c:188: I think I've made all my certificates etc OK and here are the results of some checks; If I do this; certtool -e --infile /etc/ssl/certs/ldap_cacert.pem I get Chain verification output: Verified. certtool -e --infile /etc/ssl/certs/mydomain.com_slapd_cert.pem Gives "certtool: the last certificate is not self signed" but it otherwise seems OK? Where have I gone wrong? Surely getting openldap to run securely on ubuntu should be easy and not require a degree in rocket science! Any ideas?

    Read the article

  • How to add higher video resolution in Ubuntu 10.04 (UNR on EEE1101HA)

    - by lexu
    I picked up an ASUS EEE 1101HA with Windows 7 and installed UBUNTU 10.04 Netbook Remix (dual boot). Ubuntu runs fine, but it doesn't recognize that the notebook LCD is 1388x768 and thus only offers 1024x768 and 800x600 as monitor resolution. So .. how can I tell it about that higher resolution? (Have root pwd & vi, una-bash-ed to use both.. ) UPDATE there is currently (early May 2010) no video-driver for the Intel GMA500 "Poulsbo" => no solution exists for now.

    Read the article

  • Dropbox won't connect on Ubuntu 10.10 (Waiting For Connection)

    - by slhck
    I run Ubuntu 10.10 (2.6.35-25) on an x86 machine and try to install Dropbox by downloading the latest .deb file from the website. Now, first it will install dropbox-nautilus (requiring me to restart Nautilus before that) and then ask me to start Dropbox itself. The Dropbox client opens and indefinitely waits for a connection as there is a connection error. Of course, I don't use a proxy server and I'm writing this post from this very machine, so there's no problem with the internet connection. I'm not using a firewall (at least not that I know of, the Ubuntu installation is relatively untouched so far). Does anybody have some pointers?

    Read the article

  • Upgrading Ubuntu hardy to Ruby 1.8.7

    - by Simone Carletti
    My server is running Ubuntu Hardy and Ruby 1.8.6 installed using aptitude. I'd like to upgrade to Ruby 1.8.7 but, unfortunately, the Ruby package includes Ruby 1.8.7 starting from Ubuntu Intrepid. I read a couple of tutorials about how to upgrade to Ruby 1.8.7 and I found at least 3 different way to accomplish this task: backports installation from source installation from source and multiple versions I'm a bit confused. How do you recommend to upgrade to Ruby 1.8.7 taking into consideration I don't need multiple Ruby versions on the same server? I'd like to cleanly replace the existing Ruby 1.8.6 with Ruby 1.8.7.

    Read the article

  • Ubuntu Server 10.04 Heavy Network Traffic causes disconnect

    - by K Vaughan
    I'm currently running a headless Ubuntu 10.04 server. Installed is the LAMP stack, Joomla, Virtualbox, phpvirtualbox, webmin and proFTP.. It resolves the IP address so I can access it remotely (either the apache2 webserver or the FTP) using DDClient. Any packages installed have been installed using apt-get. Webmin, although discouraged in Ubuntu Server, is used mostly to administer the webserver aspect. This issue also appeared when I was using Ubuntu Server 10.10. After periods of heavy network traffic, whether local or remote, the connect drops. I'm talking specifically about the transfer of files via FTP, SCP or Samba (the latter of which I seldom use). There is no response to ping or ssh. I can't FTP to the server nor can I load the website. There are times when the server has been on for a few days and everything runs fine because I haven't accessed it much, if at all (thus not much network traffic). I've gone through a few hardware changes although I don't believe this has cause the issue: this has been happening long before I made any changes. At first I thought it was my ISP-provided router blocking traffic because of some kind of misconfiguration (perhaps assuming it was some kind of DoS attack). I've changed routers and still found no success. I've checked syslog, dmesg and kern.log for warnings but have uncovered none. I've ran memtest via the GRUB2 menu at boot and once it turned up 4 errors. I ran again with individual sticks of RAM in various slots and everything turned up fine. I've looked through the BIOS settings and everything looks fine. I've tried unplugging unnecessary pieces of hardware (other internal hard drives, CD drives, floppy, PCI cards, etc). Any help or tips on how I can even begin to troubleshoot this would be very much appreciated. Please note that i've only started playing with servers as a hobby so my knowledge wouldn't be the most refined. I'm comfortable with command line and have the initiative to know how to look up something I can't do. Unfortunately I can't seem to find any issues like this. Additionally: If a solution can't be found some assistance to write a script that will cause the server to reboot automatically if, after x minutes, it gets no response to pinging somewhere like google. Admittedly that's not the cleanest solution should my internet end up going down but I can't think of what else to do.

    Read the article

  • Command line is horribly slow in Ubuntu Server

    - by hekevintran
    I am running Ubuntu Server on VirtualBox. I am not using X Windows, only the command line. It looks like it is redrawing the screen for every line that causes the screen to shift down. In other words if there is empty space on the screen below the current line, it works normally, but if the current line is at the bottom of the screen, when the system moves to the next line it refreshes the whole screen line by line. This causes the system to run very slowly because I have to wait for the whole screen to refresh for every line and it hits the CPU at 90%. I installed Debian Lenny in VirtualBox and it didn't do this. Why does Ubuntu Server redraw the screen for each line? Is there a way to make this behaviour go away?

    Read the article

  • How to fully use the 4G in my Laptop under Ubuntu 9.10 - 32-bit

    - by jfmessier
    I have a Toshiba A100, which I upgraded to 4G of RAM. The hardware startup indeed shows 4G of RAM, and I recently installed Windows 7, just to see how it behaves on it. So far so good, it displays 4G of RAM. Not that I tried to use it all, but it displays it. Previously under XP, I also would see 4G of RAM. But under Ubuntu 9.10 (32 or 64 bits), it only displays 2.9 G of RAM. And my kernel is the "pae" compiled one, which is supposed to do the trick to work around the 32-bit CPU limitation. How can I get Ubuntu to fully use my 4G of RAM ?

    Read the article

  • Screenshot shows black area with dual monitors on Ubuntu

    - by Hollister
    When using the built-in window screenshot function on Ubuntu (alt-printscreen) with dual monitors, a black rectangle covers about the top third of the captured window (or that area is not captured). When capturing the entire screen (printscreen), the left monitor shows the same size rectangle, but it doesn't cover the window, but pushes it down. It's as if the capture is using the smaller monitor's dimensions, and is not aware of the larger monitor. Here are the images: Window capture: http://moby.to/8d69hp Screen capture: http://moby.to/v99gqs When using the command line, I get this error: $ gnome-screenshot --window (gnome-screenshot:8522): GdkPixbuf-CRITICAL **: gdk_pixbuf_composite: assertion `dest_y >= 0 && dest_y + dest_height <= dest->height' failed System info: Ubuntu 10.04.2 LTS (Lucid) Linux 2.6.32-32-generic Left monitor (laptop) 1280x800 Right monitor (external) 1920x1080 Is there a way to get this to work? Edit: this does not happen with one monitor or when the monitors are mirrored.

    Read the article

  • How to turn off the unity launch bar in ubuntu 11.10

    - by user22106
    I would like to use the unity option in ubuntu but without the unity sidebar. I've seen how I can select to use just gnome from the login screen but there are some things I like about the unity interface. E.g. From what I've seen I like the integrated application menu with the ubuntu menu up the top that unity option comes with. So I really just want to turn the launch bar off. Any help would be appreciated. Cheers, Ben

    Read the article

  • Ubuntu Lucid: Erratic screen behaviour after boot

    - by fgysin
    In short: about 50% of the time I have a screwed up monitor setup after reboot. About 50% it is totally correct. Now the longer version: I updated my machine from 9.04 to 10.04 (via 9.10). At first I run into some monitor problems (I have a 3-monitor setup) because of the known bug in the new xserver driver for xinerama. This messes up behaviour if the mouse goes either left or above the screen number 0, i.e. I had to make my left-most monitor screen 0. Everything worked out fine finally, I got my 3-monitor setup back with xinerama enabled to get one big desktop streched over 3 screens. Now the fun part: Every time I start up my machine only one of the 3 monitors gets a signal and is woken up: it only recognizes the left-most monitor (screen 0) and crams all the desktop stuff into this one screen. If I go into nvidia settings I only see one physical device although all 3 are connected and have power. When I look into the xorg.conf I can still see my old setup with 3 devices, 3 screens, xinerama active etc... But I was totally unable to get 3 montitors to work. (I tried unplugging monitors, reconfiguring whole nvidia setup, ...) But it gets even better: When I restart my machine (i.e. choose the restart option from the Ubuntu menu) it shuts down and tries to restart. The restart then gets stuck after showing the Ubuntu splash screen with the 'loading bar' (the moving dots thingy) and I am forced to kill the machine by cutting power. But after the power cut the machine boots up normally and suddenly I get my 3 monitor setup back up working. That is until the next time I shut down and start up, where it all starts over again and I only have one monitor... (see above) I really have a hard time seeing where the error is. It must be that the restart boot somehow differs from the 'normal' boot. But the fact that it gets stuck and I need to cut power which then basically triggers a 'normal' boot does not really support this theory... My setup (please tell me if you need further info): 3 monitors as 3 screens as one desktop (with xinerama) 2 nvidia cards where screen 0 and 1 are on card 0 and screen 2 is on card 1 Ubuntu 10.04 Lucid Lynx (updated from 9.10, 9.04, ....) I would appreciate every idea on the subject, at the moment I really don't have any clue what to do...

    Read the article

  • Change Ubuntu 11 scrollbars back to the old style

    - by EMP
    The question: I've installed Ubuntu 11.04 and the new scrollbars in Nautilus, GEdit, etc. are driving me insane! How do I go back to the old (Ubuntu 10.10 and earlier) scrollbars? The explanation (for those who haven't upgraded yet): In the Natty Nautilus you can't actually see a scrollbar normally. Instead you mouse over to where it should be (to the left of the border) and then it appears, but it doesn't appear under the mouse pointer! Instead it appears to the side (to the right of the border), so starting to scroll is now a fairly involved mouse manoeuvre. I don't know what UX genius came up with this, but I want none of it.

    Read the article

  • How to install mod_wsgi 3.1 on Ubuntu 9.10

    - by pthulin
    I have a Python 3 web app so mod_wsgi < 3.1 doesn't cut it for me. However, on my Ubuntu 9.10 installation there doesn't seem to be a package for mod_wsgi 3.1. Is there an alternative repository that has a package for mod_wsgi 3.1? There's a new Ubuntu release not so long from now, will it contain mod_wsgi 3.1? Some other distro ready with mod_wsgi 3.1 to recommend? Maybe my best bet is to compile it myself? From a quick google it looks like I only need the python and apache dev packages installed. Thanks!

    Read the article

  • Increase text size in Ubuntu 10.04 due to having large resolution/monitors

    - by Sridhar Ratnakumar
    I have 24" dual monitors with 1920x1080 resolution on both of them. Consequently the text appears so small. I use the following text-intensive applications frequently: Web browser (Google Chrome) IDE (Komodo) Terminal (Gnome Terminal) Email (Thunderbird) I can configure text size on IDE, Terminal and Email. But for Chrome, it is not a good idea to set proportional font size because often one wants to see the entire (not just proportional fonts) site to be zoomed. So I am asking: Is it possible to increase DPI in Ubuntu (much like on Windows) so as to increase the text size across all apps? OR Is it possible to set permanent 'zoom' in Google Chrome, using a third-party extension maybe? I am using Ubuntu 10.04 (Lucid Lynx)

    Read the article

  • Memory cache Ubuntu 9.10 server x86 doesn't work as expected

    - by Matthijs
    We're using an Ubuntu 9.10 server to transfer Ghost-image files. We configured it only with Samba. And the DOS-clients connect to Samba. The latest updates are installed and so far the servers is running fine. When we image 10 pc's with the same image of 2 files of 2GB there's no disk activity. Everything is loaded in the RAM. There's 4GB in the server. But when we use 2 pc's with 2 different image files of 500 MB (8x) files then there's a lot of continuous disk activity. The speed is lower. So it seems that Ubuntu doesn't cache more then one big file. Are there settings to change this behaviour?

    Read the article

  • Order files in Ubuntu server in alpha order?

    - by Josh Sherick
    I have a PHP script that is for personal use that goes through a folder and lists all the pictures in the folder. The pictures are pages from a book, so it is important that they be in order. They are named so that in alphabetical order, they are also in the correct page order. I had it running on my Mac OS server, and it worked fine, listing them in order because Mac OS apparently keeps files alphabetically. Now, since I've switched to Ubuntu, it is listing them in a seemingly random order. Is there any way to order files in Ubuntu server so that they are in alphabetical order?

    Read the article

  • autobench in ubuntu 8.10

    - by mamathahl
    Hi, I'm using ubuntu 8.10. I want to do benchmarking using autobench. I could install httperf by the command sudo apt-get install httperf I thought I should be installing autobench in the same way using apt-get. But the package was not found. Can anybody please suggest me what should I be doing in order make this "autobench" command work for me in ubuntu? Any help in this regard will be appreciated. Thanks in advance.

    Read the article

  • Virtual machine on ubuntu

    - by MITHIYA MOIZ
    I have configured virtual machine on ubuntu with the help of below article, https://help.ubuntu.com/9.04/serverguide/C/libvirt.html I managed to finish all the part except the major portion getting virtual host to talk to real network, Which I guess should be done only via bridge interface. Via virtual machine manager I try to choose any interface it gives me interface not bridged When I try to bridge the interceface eth0 as below auto br0 iface br0 inet static address 192.168.0.223 network 192.168.0.0 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off I cannot communicate with this interface to network, host server looses all the communication to network. But when I remote bridge interface from /etc/network/interfaces And configure eth0 as below it works fine The primary network interface auto eth0 iface eth0 inet static address 192.168.0.223 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 dns-nameservers 62.215.6.51 gateway 192.168.0.1 how can i setup bridge interface correctly and how would my /etc/netwrok/interfaces file would look a like.

    Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >