Search Results

Search found 4297 results on 172 pages for 'low kian seong'.

Page 31/172 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

• The Power to Control Power

  - by speakjava

  I'm currently working on a number of projects using embedded Java on the Raspberry Pi and Beagle Board.  These are nice and small, so don't take up much room on my desk as you can see in this picture. As you can also see I have power and network connections emerging from under my desk.  One of the (admittedly very minor) drawbacks of these systems is that they have no on/off switch.  Instead you insert or remove the power connector (USB for the RasPi, a barrel connector for the Beagle).  For the Beagle Board this can potentially be an issue; with the micro-SD card located right next to the connector it has been known for people to eject the card when trying to power off the board, which can be quite serious for the hardware. The alternative is obviously to leave the boards plugged in and then disconnect the power from the outlet.  Simple enough, but a picture of underneath my desk shows that this is not the ideal situation either. This made me think that it would be great if I could have some way of controlling a mains voltage outlet using a remote switch or, even better, from software via a USB connector.  A search revealed not much that fit my requirements, and anything that was close seemed very expensive.  Obviously the only way to solve this was to build my own.Here's my solution.  I decided my system would support both control mechanisms (remote physical switch and USB computer control) and be modular in its design for optimum flexibility.  I did a bit of searching and found a company in Hong Kong that were offering solid state relays for 99p plus shipping (£2.99, but still made the total price very reasonable).  These would handle up to 380V AC on the output side so more than capable of coping with the UK 240V supply.  The other great thing was that being solid state, the input would work with a range of 3-32V and required a very low current of 7.5mA at 12V.  For the USB control an Arduino board seemed the obvious low-cost and simple choice.  Given the current requirments of the relay, the Arduino would not require the additional power supply and could be powered just from the USB.Having secured the relays I popped down to Homebase for a couple of 13A sockets, RS for a box and an Arduino and Maplin for a toggle switch.  The circuit is pretty straightforward, as shown in the diagram (only one output is shown to make it as simple as possible).  Originally I used a 2 pole toggle switch to select the remote switch or USB control by switching the negative connections of the low voltage side.  Unfortunately, the resistance between the digital pins of the Arduino board was not high enough, so when using one of the remote switches it would turn on both of the outlets.  I changed to a 4 pole switch and isolated both positive and negative connections. IMPORTANT NOTE: If you want to follow my design, please be aware that it requires working with mains voltages.  If you are at all concerned with your ability to do this please consult a qualified electrician to help you.It was a tight fit, especially getting the Arduino in, but in the end it all worked.  The completed box is shown in the photos. The remote switch was pretty simple just requiring the squeezing of two rocker switches and a 9V battery into the small RS supplied box.  I repurposed a standard stereo cable with phono plugs to connect the switch box to the mains outlets.  I chopped off one set of plugs and wired it to the rocker switches.  The photo shows the RasPi and the Beagle board now controllable from the switch box on the desk. I've tested the Arduino side of things and this works fine.  Next I need to write some software to provide an interface for control of the outlets.  I'm thinking a JavaFX GUI would be in keeping with the total overkill style of this project.

  Read the article

• Stale statistics on a newly created temporary table in a stored procedure can lead to poor performance

  - by sqlworkshops

  When you create a temporary table you expect a new table with no past history (statistics based on past existence), this is not true if you have less than 6 updates to the temporary table. This might lead to poor performance of queries which are sensitive to the content of temporary tables.I was optimizing SQL Server Performance at one of my customers who provides search functionality on their website. They use stored procedure with temporary table for the search. The performance of the search depended on who searched what in the past, option (recompile) by itself had no effect. Sometimes a simple search led to timeout because of non-optimal plan usage due to this behavior. This is not a plan caching issue rather temporary table statistics caching issue, which was part of the temporary object caching feature that was introduced in SQL Server 2005 and is also present in SQL Server 2008 and SQL Server 2012. In this customer case we implemented a workaround to avoid this issue (see below for example for workarounds).When temporary tables are cached, the statistics are not newly created rather cached from the past and updated based on automatic update statistics threshold. Caching temporary tables/objects is good for performance, but caching stale statistics from the past is not optimal.We can work around this issue by disabling temporary table caching by explicitly executing a DDL statement on the temporary table. One possibility is to execute an alter table statement, but this can lead to duplicate constraint name error on concurrent stored procedure execution. The other way to work around this is to create an index.I think there might be many customers in such a situation without knowing that stale statistics are being cached along with temporary table leading to poor performance.Ideal solution is to have more aggressive statistics update when the temporary table has less number of rows when temporary table caching is used. I will open a connect item to report this issue.Meanwhile you can mitigate the issue by creating an index on the temporary table. You can monitor active temporary tables using Windows Server Performance Monitor counter: SQL Server: General Statistics->Active Temp Tables. The script to understand the issue and the workaround is listed below:set nocount onset statistics time offset statistics io offdrop table tab7gocreate table tab7 (c1 int primary key clustered, c2 int, c3 char(200))gocreate index test on tab7(c2, c1, c3)gobegin trandeclare @i intset @i = 1while @i <= 50000begininsert into tab7 values (@i, 1, ‘a’)set @i = @i + 1endcommit trangoinsert into tab7 values (50001, 1, ‘a’)gocheckpointgodrop proc test_slowgocreate proc test_slow @i intasbegindeclare @j intcreate table #temp1 (c1 int primary key)insert into #temp1 (c1) select @iselect @j = t7.c1 from tab7 t7 inner join #temp1 t on (t7.c2 = t.c1)endgodbcc dropcleanbuffersset statistics time onset statistics io ongo–high reads as expected for parameter ’1'exec test_slow 1godbcc dropcleanbuffersgo–high reads that are not expected for parameter ’2'exec test_slow 2godrop proc test_with_recompilegocreate proc test_with_recompile @i intasbegindeclare @j intcreate table #temp1 (c1 int primary key)insert into #temp1 (c1) select @iselect @j = t7.c1 from tab7 t7 inner join #temp1 t on (t7.c2 = t.c1)option (recompile)endgodbcc dropcleanbuffersset statistics time onset statistics io ongo–high reads as expected for parameter ’1'exec test_with_recompile 1godbcc dropcleanbuffersgo–high reads that are not expected for parameter ’2'–low reads on 3rd execution as expected for parameter ’2'exec test_with_recompile 2godrop proc test_with_alter_table_recompilegocreate proc test_with_alter_table_recompile @i intasbegindeclare @j intcreate table #temp1 (c1 int primary key)–to avoid caching of temporary tables one can create a constraint–but this might lead to duplicate constraint name error on concurrent usagealter table #temp1 add constraint test123 unique(c1)insert into #temp1 (c1) select @iselect @j = t7.c1 from tab7 t7 inner join #temp1 t on (t7.c2 = t.c1)option (recompile)endgodbcc dropcleanbuffersset statistics time onset statistics io ongo–high reads as expected for parameter ’1'exec test_with_alter_table_recompile 1godbcc dropcleanbuffersgo–low reads as expected for parameter ’2'exec test_with_alter_table_recompile 2godrop proc test_with_index_recompilegocreate proc test_with_index_recompile @i intasbegindeclare @j intcreate table #temp1 (c1 int primary key)–to avoid caching of temporary tables one can create an indexcreate index test on #temp1(c1)insert into #temp1 (c1) select @iselect @j = t7.c1 from tab7 t7 inner join #temp1 t on (t7.c2 = t.c1)option (recompile)endgoset statistics time onset statistics io ondbcc dropcleanbuffersgo–high reads as expected for parameter ’1'exec test_with_index_recompile 1godbcc dropcleanbuffersgo–low reads as expected for parameter ’2'exec test_with_index_recompile 2go

  Read the article

• Cannot get ATI Drivers installed

  - by bittoast67

  I am trying to install the Catalyst driver. The best I can get is a strange resolution problem and firefox acts all wonkt. The worst I have gotten is low graphics mode in which I just reinstall Ubuntu. I have a HP Pavilion Dv7 laptop. With Radeon 3200 HD. I plan to try again with a fresh install of Ubuntu 12.4.3 as I have heard its the most compatible. This is what I have done: I have tried just the easy way of going to synaptic and installing the drivers that way. the fglrx package (not the fglrx update). And if memory serves I think that boots me into low graphics mode. So, fresh install of Ubuntu and tried again. I have done everything a couple times from this site (http://wiki.cchtml.com/index.php/Ubuntu_Precise_Installation_Guide) following every instruction to a T. That gets me something, such as a lowered fan speed and a much cooler computer, but I also lose most of my resolution. And displays says its the best resolution I can get. I also have a very screwy firefox. Using this method I can see AMD Catalyst Control Center in my dash (two of them really one administrator and one not) but when I try to open it it says no amd driver detected. So again, ubuntu reinstall. I have tried the GUI method from the Legacy driver I got from AMD's site. It runs through smoothly and at the very end after I exit the installer it gives me an error. I have also tried various other methods using terminal, as well as various different drivers (the one from the amd's site and the one suggested in the above link for my graphics card) both to no avail. When I try the method in the link on number 2, and I get the super low res and screwy fire fox. I type in, fglrxinfo ,and get a badrequest error. I have yet to type in fglrxinfo and get anything like what I am supposed to. UPDATE: I am now currently reinstalling Ubuntu 12.4. I tried the above mentioned link - thank you very much!- just to see on the previously failed driver attempt by following the purge commands. And to no avail when typing fglrxinfo I still get the badrequest thing. I will update again after a try with a true fresh install. Thanks again!! UPDATE: Alright everyone. Still no go. I have done everything word per word in the provided tutorial. I have rebooted my computer again to a fucked up resolution and this is what I get when typing fglrxinfo: $ fglrxinfo X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 153 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 12 Current serial number in output stream: 12 I would like to add that when installing this file: fglrx_8.970-0ubuntu1_amd64.deb I got this: Building initial module for 3.8.0-29-generic Error! Bad return status for module build on kernel: 3.8.0-29-generic (x86_64) Consult /var/lib/dkms/fglrx/8.970/build/make.log for more information. update-initramfs: deferring update (trigger activated) Processing triggers for ureadahead ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.8.0-29-generic Processing triggers for libc-bin ... ldconfig deferred processing now taking place Any ideas? Anyone? I cant for the life of me figure out what I am doing wrong.

  Read the article

• How to analyze 'dbcc memorystatus' result in SQL Server 2008

  - by envykok

  Currently i am facing a sql memory pressure issue. i have run 'dbcc memorystatus', here is part of my result: Memory Manager KB VM Reserved 23617160 VM Committed 14818444 Locked Pages Allocated 0 Reserved Memory 1024 Reserved Memory In Use 0 Memory node Id = 0 KB VM Reserved 23613512 VM Committed 14814908 Locked Pages Allocated 0 MultiPage Allocator 387400 SinglePage Allocator 3265000 MEMORYCLERK_SQLBUFFERPOOL (node 0) KB VM Reserved 16809984 VM Committed 14184208 Locked Pages Allocated 0 SM Reserved 0 SM Committed 0 SinglePage Allocator 0 MultiPage Allocator 408 MEMORYCLERK_SQLCLR (node 0) KB VM Reserved 6311612 VM Committed 141616 Locked Pages Allocated 0 SM Reserved 0 SM Committed 0 SinglePage Allocator 1456 MultiPage Allocator 20144 CACHESTORE_SQLCP (node 0) KB VM Reserved 0 VM Committed 0 Locked Pages Allocated 0 SM Reserved 0 SM Committed 0 SinglePage Allocator 3101784 MultiPage Allocator 300328 Buffer Pool Value Committed 1742946 Target 1742946 Database 1333883 Dirty 940 In IO 1 Latched 18 Free 89 Stolen 408974 Reserved 2080 Visible 1742946 Stolen Potential 1579938 Limiting Factor 13 Last OOM Factor 0 Page Life Expectancy 5463 Process/System Counts Value Available Physical Memory 258572288 Available Virtual Memory 8771398631424 Available Paging File 16030617600 Working Set 15225597952 Percent of Committed Memory in WS 100 Page Faults 305556823 System physical memory high 1 System physical memory low 0 Process physical memory low 0 Process virtual memory low 0 Procedure Cache Value TotalProcs 11382 TotalPages 430160 InUsePages 28 Can you lead me to analyze this result ? Is it a lot execute plan have been cached causing the memory issue or other reasons?

  Read the article

• Parsing a file in C

  - by sfactor

  I need parse through a file and do some processing into it. The file is a text file and the data is a variable length data of the form "PP1004181350D001002003..........". So there will be timestamps if there is PP so 1004181350 is 2010-04-08 13:50. The ones where there are D are the data points that are three separate data each three digits long, so D001002003 has three coordonates of 001, 002 and 003. Now I need to parse this data from a file for which I need to store each timestamp into a array and the corresponding datas into arrays that has as many rows as the number of data and three rows for each co-ordinate. The end array might be like TimeStamp[1] = "135000", low[1] = "001", medium[1] = "002", high[1] = "003" TimeStamp[2] = "135015", low[2] = "010", medium[2] = "012", high[2] = "013" TimeStamp[3] = "135030", low[3] = "051", medium[3] = "052", high[3] = "043" .... The question is how do I go about doing this in C? How do I go through this string looking for these patterns? Note: Here the seconds value in timestamp is added on our own as it is known at each data comes after 15 seconds.

  Read the article

• what is the best way to stream a audio file to website users/listners

  - by Naveen Chamikara Gamage

  I'm developing a music site which will stream audio files stored in a server to users, audio files will be played through flash player placed in a webpage.. As I heard I need to use a streaming media server for streaming audio files ( like 2mb to 3mb in size).. Do I need to use one? I found some streaming media server softwares like http://www.icecast.org - but as in their documentation, It is used for streaming radio stations and live streaming purposes, but I just need to stream audio files faster and in low size (low bandwidth) with good quality.. I heard I need to encode the audio files first and then send them to listeners and in their end audio files need to be decoded again. Is that true? How can I do that? if I need to use a special web server, where should I host my files? Any good hosting providers? if I host audio files in a normal web server, they will use HTTP or TCP to deliver my audio files to users/ listners but I found that HTTP and TCP are not good ways to use for multi media purposes like streaming audio and video files, and they are used for delivering HTML and stuff. I found I should use RSTP or UDP for streaming audio files.. What should I use? I know that .MP3 files has much better quality than the other formats but it also gives huge size to the audio files.. which format should I use for audio files? Most of the best quality audio files are more than 7mb so I'm planning to convert them my self using a software so I could get low size files with some level of good quality. If I'm converting my audio files what is the good BITRATE I should use for my files? Any known best softwares for converting audio files while keeping quality in a good level? Note** - I know that I will not need complex requirements at the beginning of the site but I wanted to what are the best ways like they are using for soundcloud.com

  Read the article

• How to hide zero values in bar3 plot in MATLAB

  - by Doresoom

  I've got a 2-D histogram (the plot is 3D - several histograms graphed side by side) that I've generated with the bar3 plot command. However, all the zero values show up as flat squares in the x-y plane. Is there a way I can prevent MATLAB from displaying the values? I already tried replacing all zeros with NaNs, but it didn't change anything about the plot. Here's the code I've been experimenting with: x1=normrnd(50,15,100,1); %generate random data to test code x2=normrnd(40,13,100,1); x3=normrnd(65,12,100,1); low=min([x1;x2;x3]); high=max([x1;x2;x3]); y=linspace(low,high,(high-low)/4); %establish consistent bins for histogram z1=hist(x1,y); z2=hist(x2,y); z3=hist(x3,y); z=[z1;z2;z3]'; bar3(z) As you can see, there are quite a few zero values on the plot. Closing the figure and re-plotting after replacing zeros with NaNs seems to change nothing: close z(z==0)=NaN; bar3(z)

  Read the article

• Perl cron job stays running

  - by Dylan

  I'm currently using a cron job to have a Perl script that tells my Arduino to cycle my aquaponics system and all is well, except the Perl script doesn't die as intended. Here is my cron job: */15 * * * * /home/dburke/scripts/hal/bin/main.pl cycle And below is my Perl script: #!/usr/bin/perl -w # Sample Perl script to transmit number # to Arduino then listen for the Arduino # to echo it back use strict; use Device::SerialPort; use Switch; use Time::HiRes qw ( alarm ); $|++; # Set up the serial port # 19200, 81N on the USB ftdi driver my $device = '/dev/arduino0'; # Tomoc has to use a different tty for testing #$device = '/dev/ttyS0'; my $port = new Device::SerialPort ($device) or die('Unable to open connection to device');; $port->databits(8); $port->baudrate(19200); $port->parity("none"); $port->stopbits(1); my $lastChoice = ' '; my $pid = fork(); my $signalOut; my $args = shift(@ARGV); # Parent must wait for child to exit before exiting itself on CTRL+C $SIG{'INT'} = sub { waitpid($pid,0) if $pid != 0; exit(0); }; # What child process should do if($pid == 0) { # Poll to see if any data is coming in print "\nListening...\n\n"; while (1) { my $incmsg = $port->lookfor(9); # If we get data, then print it if ($incmsg) { print "\nFrom arduino: " . $incmsg . "\n\n"; } } } # What parent process should do else { if ($args eq "cycle") { my $stop = 0; sleep(1); $SIG{ALRM} = sub { print "Expecting plant bed to be full; please check.\n"; $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2\n"; $stop = 1; }; $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1\n"; print "Waiting for plant bed to fill...\n"; alarm (420); while ($stop == 0) { sleep(2); } die "Done."; } else { sleep(1); my $choice = ' '; print "Please pick an option you'd like to use:\n"; while(1) { print " [1] Cycle [2] Relay OFF [3] Relay ON [4] Config [$lastChoice]: "; chomp($choice = <STDIN>); switch ($choice) { case /1/ { $SIG{ALRM} = sub { print "Expecting plant bed to be full; please check.\n"; $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2\n"; }; $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1\n"; print "Waiting for plant bed to fill...\n"; alarm (420); $lastChoice = $choice; } case /2/ { $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2"; $lastChoice = $choice; } case /3/ { $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1"; $lastChoice = $choice; } case /4/ { print "There is no configuration available yet. Please stab the developer."; } else { print "Please select a valid option.\n\n"; } } } } } Why wouldn't it die from the statement die "Done.";? It runs fine from the command line and also interprets the 'cycle' argument fine. When it runs in cron it runs fine, however, the process never dies and while each process doesn't continue to cycle the system it does seem to be looping in some way due to the fact that it ups my system load very quickly. If you'd like more information, just ask. EDIT: I have changed to code to: #!/usr/bin/perl -w # Sample Perl script to transmit number # to Arduino then listen for the Arduino # to echo it back use strict; use Device::SerialPort; use Switch; use Time::HiRes qw ( alarm ); $|++; # Set up the serial port # 19200, 81N on the USB ftdi driver my $device = '/dev/arduino0'; # Tomoc has to use a different tty for testing #$device = '/dev/ttyS0'; my $port = new Device::SerialPort ($device) or die('Unable to open connection to device');; $port->databits(8); $port->baudrate(19200); $port->parity("none"); $port->stopbits(1); my $lastChoice = ' '; my $signalOut; my $args = shift(@ARGV); # Parent must wait for child to exit before exiting itself on CTRL+C if ($args eq "cycle") { open (LOG, '>>log.txt'); print LOG "Cycle started.\n"; my $stop = 0; sleep(2); $SIG{ALRM} = sub { print "Expecting plant bed to be full; please check.\n"; $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2\n"; $stop = 1; }; $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1\n"; print "Waiting for plant bed to fill...\n"; print LOG "Alarm is being set.\n"; alarm (420); print LOG "Alarm is set.\n"; while ($stop == 0) { print LOG "In while-sleep loop.\n"; sleep(2); } print LOG "The loop has been escaped.\n"; die "Done."; print LOG "No one should ever see this."; } else { my $pid = fork(); $SIG{'INT'} = sub { waitpid($pid,0) if $pid != 0; exit(0); }; # What child process should do if($pid == 0) { # Poll to see if any data is coming in print "\nListening...\n\n"; while (1) { my $incmsg = $port->lookfor(9); # If we get data, then print it if ($incmsg) { print "\nFrom arduino: " . $incmsg . "\n\n"; } } } # What parent process should do else { sleep(1); my $choice = ' '; print "Please pick an option you'd like to use:\n"; while(1) { print " [1] Cycle [2] Relay OFF [3] Relay ON [4] Config [$lastChoice]: "; chomp($choice = <STDIN>); switch ($choice) { case /1/ { $SIG{ALRM} = sub { print "Expecting plant bed to be full; please check.\n"; $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2\n"; }; $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1\n"; print "Waiting for plant bed to fill...\n"; alarm (420); $lastChoice = $choice; } case /2/ { $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2"; $lastChoice = $choice; } case /3/ { $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1"; $lastChoice = $choice; } case /4/ { print "There is no configuration available yet. Please stab the developer."; } else { print "Please select a valid option.\n\n"; } } } } }

  Read the article

• Force windows video driver reload. Is it possible at all?

  - by somemorebytes

  Hi there, Some drivers use parameters written in the registry to configure themselves when they get loaded at boot time. I can modify those values and then reboot, but I would like to know if it is possible to force the driver reload, making the changes effective without rebooting. Specifically, I am talking about the video driver (nvidia). I read somewhere, that calling through pINvoke() [User32.ll]::ChangeDisplaySettings() with a 640x480x8bits resolution,(which is so low that it should not be supported by a modern driver) will force windows to load the "Standard VGA driver", and making another call with the current resolution will load the nvidia driver again. This does not work though. At least in Windows 7, even if the low res is not displayed as "supported" the system reduces the screen to a little square in the center of the screen, showing the low res wihtout unloading the nvidia driver. So, is there any .NET/Win32 API, service to restart, or any way at all to force a video driver reload? Perhaps programatically disabling the device (as you could do from the Device Manager) and reenabling it again? Any idea? Thanks a lot.

  Read the article

• parse a special xml in python

  - by zhaojing

  I have s special xml file like below: <alarm-dictionary source="DDD" type="ProxyComponent"> <alarm code="402" severity="Alarm" name="DDM_Alarm_402"> <message>Database memory usage low threshold crossed</message> <description>dnKinds = database type = quality_of_service perceived_severity = minor probable_cause = thresholdCrossed additional_text = Database memory usage low threshold crossed </description> </alarm> ... </alarm-dictionary> I know in python, I can get the "alarm code", "severity" in tag alarm by: for alarm_tag in dom.getElementsByTagName('alarm'): if alarm_tag.hasAttribute('code'): alarmcode = str(alarm_tag.getAttribute('code')) And I can get the text in tag message like below: for messages_tag in dom.getElementsByTagName('message'): messages = "" for message_tag in messages_tag.childNodes: if message_tag.nodeType in (message_tag.TEXT_NODE, message_tag.CDATA_SECTION_NODE): messages += message_tag.data But I also want to get the value like dnkind(database), type(quality_of_service), perceived_severity(thresholdCrossed) and probable_cause(Database memory usage low threshold crossed ) in tag description. That is, I also want to parse the content in the tag in xml. Could anyone help me with this? Thanks a lot!

  Read the article

• Where to find new Micro-BTX (uBTX) motherboards? Or should I just replace the box?

  - by John Rudy

  OK, so I'm guessing that it's dead. It's not my machine, and the owner is on a very fixed (IE, none) income. I'm generous, but I'm not that generous, since I already gave him what (at the time) was a fully functional and fairly well-equipped machine. (Aside from the mobo and proc, almost nothing else in it was stock. I'd taken it up to 3GB of RAM, upgraded the hard drive, added a decent video card, installed a wireless adapter, running Vista, etc.) According to further research, the machine uses a Micro-BTX (uBTX) motherboard, and since it's an AMD Athlon64, the AM2 socket. So I'm looking at a few options, and am wondering what's the best route to take? Find an AM2 socket uBTX mobo. I can't find them new online anywhere, leading me to believe that this is an obsolete form factor/chip combination. I don't want a refurb or a system pull because, quite honestly, once I deal with this mess, I don't want to go through it again in another year or two. Find an Intel uBTX mobo and a (relatively -- hah, I still want at least a dual-core) inexpensive Intel CPU. At this point, the only things stock in the machine would be the case and the PSU. :) Buy a bare-bones kit (mobo/proc/PSU/case, sometimes even RAM) from somewhere like CompUSA/TigerDirect or Fry's and move all of the other hardware over. This makes life difficult because the copy of Vista is an upgrade, tied to the copy of XP which shipped on the Gateway, which is OEM and won't install on the new box. :) If I change the CPU brand (AMD to Intel), will I need to reinstall Windows, or can it just be reactivated? Where can I actually find a new, in-box, not system pull, not refurb AM2 uBTX mobo? Do they even exist anymore? What kind of money are we talking (US dollars)? The end goal is to get the machine functional again as cheaply as humanly possible. If it were my own machine, I wouldn't even be asking this, I'd be custom-building a new one. However, it's not mine, I'm shelling out of pocket for the fix (plus the work), and thus want to keep that end price low-low-low.

  Read the article

• Running out of LowMem with Ubuntu PAE Kernel and 32GB of RAM

  - by magneticMonster

  I'm running a Java data import process on a 32-bit Ubuntu 10 PAE kernel machine. After running the process for a while, the oom-killer zaps my Java process. After some Googling and digging through docs, it looks like the system is running out of LowMem. I started the process for the third time and am watching free -lm show me Low: 464 386 77 with the free value (77MB) slowly decreasing. Why am I running out of lowmem and how do I increase it? Some details: $ cat /proc/sys/vm/lowmem_reserve_ratio 256 256 32 $ free -lm total used free shared buffers cached Mem: 32086 24611 7475 0 0 24012 Low: 464 407 57 High: 31621 24204 7417 -/+ buffers/cache: 598 31487 Swap: 2047 0 2047

  Read the article

• in HFT trading should I upgrade from Windows Server 2008 R2 to Windows Server 2012?

  - by javapowered

  I'm using HP DL360p Gen8 + Windows Server 2008 R2 for HFT trading. That means that every 10 microseconds is important for me. I do understand that if I need everything to be so fast I probably should consider using Linux. But in this post I want to compare only Windows Server 2008 R2 and Windows Server 2012. I've found in internet couple articles that suggest how to tune Windows Server 2012 for low latency http://msdn.microsoft.com/library/windows/hardware/jj248719 http://technet.microsoft.com/en-us/library/hh831415.aspx Most part of optimizations from these articles apply only to Windows Server 2012 and can not be used on Windows Server 2008 R2. So now I think that as I can optimize Windows Server 2012 for low latency, probaly I should upgrade? After optimizations how much faster windows server 2012 would be (ideally in microseconds :)?

  Read the article

• Remote Desktop closes with Fatal Error (Error Code: 5)

  - by Swinders

  We have one PC (Windows XP SP3) that we can not log onto using a Remote Desktop session. Logging on to the PC directly (sitting in front of it using the connected keyboard and monitor) work fine. From a second PC (tried a number of different ones but all Windows XP SP3) I run 'mstsc' and type in PC name to connect to. This shows the login box which we can enter the correct login details and click OK. Within a few second we get an error: Title: Fatal Error (Error Code:5) Error: Your Remote Desktop session is about to end. This computer might be low on virtual memory. Close your other programs, and then try connecting to the remote computer again. If the problem continues, contact your network administrator or technical support. None of the computers we are using are low on memory (2Gb+) and we let windows manage the virtual memory side of things. We do not see this with any other PC and do use Remote Desktop in meeting rooms to connect to user PCs with no problems.

  Read the article

• IIS7 URL Rewrite for URL with &rsquo;

  - by blizz

  I'm trying to redirect the following URL in IIS7 using the URL Rewrite module: Category/Cat-3/Objectives-of-Pre-Maintenance/WHAT&rsquo;S-THE-STORY-ON-LOW-CARB-DIETS-AND-EXERCISE-.aspx but for the life of me I can not get it. I tried replacing the &rsquo; with an actual single quote, and that worked fine! But for the purpose of this redirect, I need the HTML code for the quote, and not the quote itself. Here is the rule from web config: <rule name="Redirect" patternSyntax="ECMAScript" stopProcessing="true"> <match url="^Category/Cat-3/Objectives-of-Pre-Maintenance/WHAT&amp;rsquo;S-THE-STORY-ON-LOW-CARB-DIETS-AND-EXERCISE-\.aspx" /> <conditions> <add input="{HTTP_HOST}" pattern="www.example.com" /> </conditions> <action type="Redirect" url="http://www.example.com/redirecturl/" appendQueryString="false" /> </rule> Any ideas would be very helpful! Thanks

  Read the article

• Memory Troubles with UIImagePicker

  - by Dan Ray

  I'm building an app that has several different sections to it, all of which are pretty image-heavy. It ties in with my client's website and they're a "high-design" type outfit. One piece of the app is images uploaded from the camera or the library, and a tableview that shows a grid of thumbnails. Pretty reliably, when I'm dealing with the camera version of UIImagePickerControl, I get hit for low memory. If I bounce around that part of the app for a while, I occasionally and non-repeatably crash with "status:10 (SIGBUS)" in the debugger. On low memory warning, my root view controller for that aspect of the app goes to my data management singleton, cruises through the arrays of cached data, and kills the biggest piece, the image associated with each entry. Thusly: - (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"Low Memory Warning" message:@"Cleaning out events data" delegate:nil cancelButtonTitle:@"All right then." otherButtonTitles:nil]; [alert show]; [alert release]; NSInteger spaceSaved; DataManager *data = [DataManager sharedDataManager]; for (Event *event in data.eventList) { spaceSaved += [(NSData *)UIImagePNGRepresentation(event.image) length]; event.image = nil; spaceSaved -= [(NSData *)UIImagePNGRepresentation(event.image) length]; } NSString *titleString = [NSString stringWithFormat:@"Saved %d on event images", spaceSaved]; for (WondrMark *mark in data.wondrMarks) { spaceSaved += [(NSData *)UIImagePNGRepresentation(mark.image) length]; mark.image = nil; spaceSaved -= [(NSData *)UIImagePNGRepresentation(mark.image) length]; } NSString *messageString = [NSString stringWithFormat:@"And total %d on event and mark images", spaceSaved]; NSLog(@"%@ - %@", titleString, messageString); // Relinquish ownership any cached data, images, etc that aren't in use. } As you can see, I'm making a (poor) attempt to eyeball the memory space I'm freeing up. I know it's not telling me about the actual memory footprint of the UIImages themselves, but it gives me SOME numbers at least, so I can see that SOMETHING'S happening. (Sorry for the hamfisted way I build that NSLog message too--I was going to fire another UIAlertView, but realized it'd be more useful to log it.) Pretty reliably, after toodling around in the image portion of the app for a while, I'll pull up the camera interface and get the low memory UIAlertView like three or four times in quick succession. Here's the NSLog output from the last time I saw it: 2010-05-27 08:55:02.659 EverWondr[7974:207] Saved 109591 on event images - And total 1419756 on event and mark images wait_fences: failed to receive reply: 10004003 2010-05-27 08:55:08.759 EverWondr[7974:207] Saved 4 on event images - And total 392695 on event and mark images 2010-05-27 08:55:14.865 EverWondr[7974:207] Saved 4 on event images - And total 873419 on event and mark images 2010-05-27 08:55:14.969 EverWondr[7974:207] Saved 4 on event images - And total 4 on event and mark images 2010-05-27 08:55:15.064 EverWondr[7974:207] Saved 4 on event images - And total 4 on event and mark images And then pretty soon after that we get our SIGBUS exit. So that's the situation. Now my specific questions: THE time I see this happening is when the UIPickerView's camera iris shuts. I click the button to take the picture, it does the "click" animation, and Instruments shows my memory footprint going from about 10mb to about 25mb, and sitting there until the image is delivered to my UIViewController, where usage drops back to 10 or 11mb again. If we make it through that without a memory warning, we're golden, but most likely we don't. Anything I can do to make that not be so expensive? Second, I have NSZombies enabled. Am I understanding correctly that that's actually preventing memory from being freed? Am I subjecting my app to an unfair test environment? Third, is there some way to programmatically get my memory usage? Or at least the usage for a UIImage object? I've scoured the docs and don't see anything about that.

  Read the article

• linux ssh -X graphical applications will not start when system load is high

  - by Chrisv

  So I am using ssh -X to access a server. I am at a Xubuntu desktop accessing a Ubuntu server that is in the next room. Usually everything works fine, but when the system load gets high, any graphical applications I have freeze and fail to be restarted. This happens even if the process that is causing the high load has been niced to a low priority with "nice -n 19". And even though the system load is high, the command line works fine with no delay, and other applications I have running on the server (e.g. virtual machines) run fine. But any graphical application running through X dies. When the graphical applications fail they usually give out an error message that suggests a time-out. It seems that something connected to X has a low priority and times out. But what is it, and how does one fix it?

  Read the article

• Lack of Virtual Memory - confusion

  - by Wesley

  Specs ahead of time: AMD Athlon XP 2400+ @ 2.00 GHz / 1 GB PC-3200 DDR RAM / 160 GB IDE HDD / 128 MB GeForce 6200 AGP / FIC AM37 / 350W PSU / Windows XP Pro SP3 So, XP has pop-ups saying that I am low on virtual memory. However, I have a program called SmartRAM (part of Advanced SystemCare by IObit) and it displays CPU & Page File Usage and Free Physical and Virtual Memory. That program shows that I have at least 2000 MB free virtual memory on my machine when the XP pop-ups say that I'm low on virtual memory. First off, would a complete lack of virtual memory cause my computer to freeze? Secondly, how can I solve this lack of virtual memory? (A complete reformat is possible but can't be done immediately...) Thanks in advance.

  Read the article

• sound volume increase beyond 100% whenever possible on linux

  - by fakedrake

  Some audio output from files or streams is too low. It is obvious that hardware is able to play the same sounds but louder but because of the data it just plays it at some low level even at 100% volume. Vlc can generally increase the volume of a file up to 200%. Is there a way to do the same thing VLC does system-wide and if possible for an arbitrary v percentage value. If there is no application that does this, where should i look into for libs to do it myself or what code should i modify(eg code in the alsamixer) thank you

  Read the article

• Strategy and AI for the game 'Proximity'

  - by smci

  'Proximity' is a strategy game of territorial domination similar to Othello, Go and Risk. Two players, uses a 10x12 hex grid. Game invented by Brian Cable in 2007. Seems to be a worthy game for discussing a) optimal strategy then b) how to build an AI Strategies are going to be probabilistic or heuristic-based, due to the randomness factor, and the high branching factor (starts out at 120). So it will be kind of hard to compare objectively. A compute time limit of 5s per turn seems reasonable. Game: Flash version here and many copies elsewhere on the web Rules: here Object: to have control of the most armies after all tiles have been placed. Each turn you received a randomly numbered tile (value between 1 and 20 armies) to place on any vacant board space. If this tile is adjacent to any ally tiles, it will strengthen each tile's defenses +1 (up to a max value of 20). If it is adjacent to any enemy tiles, it will take control over them if its number is higher than the number on the enemy tile. Thoughts on strategy: Here are some initial thoughts; setting the computer AI to Expert will probably teach a lot: minimizing your perimeter seems to be a good strategy, to prevent flips and minimize worst-case damage like in Go, leaving holes inside your formation is lethal, only more so with the hex grid because you can lose armies on up to 6 squares in one move low-numbered tiles are a liability, so place them away from your main territory, near the board edges and scattered. You can also use low-numbered tiles to plug holes in your formation, or make small gains along the perimeter which the opponent will not tend to bother attacking. a triangle formation of three pieces is strong since they mutually reinforce, and also reduce the perimeter Each tile can be flipped at most 6 times, i.e. when its neighbor tiles are occupied. Control of a formation can flow back and forth. Sometimes you lose part of a formation and plug any holes to render that part of the board 'dead' and lock in your territory/ prevent further losses. Low-numbered tiles are obvious-but-low-valued liabilities, but high-numbered tiles can be bigger liabilities if they get flipped (which is harder). One lucky play with a 20-army tile can cause a swing of 200 (from +100 to -100 armies). So tile placement will have both offensive and defensive considerations. Comment 1,2,4 seem to resemble a minimax strategy where we minimize the maximum expected possible loss (modified by some probabilistic consideration of the value ß the opponent can get from 1..20 i.e. a structure which can only be flipped by a ß=20 tile is 'nearly impregnable'.) I'm not clear what the implications of comments 3,5,6 are for optimal strategy. Interested in comments from Go, Chess or Othello players. (The sequel ProximityHD for XBox Live, allows 4-player -cooperative or -competitive local multiplayer increases the branching factor since you now have 5 tiles in your hand at any given time, of which you can only play one. Reinforcement of ally tiles is increased to +2 per ally.)

  Read the article

• Raid0 performance degradation?

  - by davy8

  Not sure if this belongs here or on SuperUser, feel free to move as appropriate. I've noticed the performance on my RAID0 setup seems to have degraded over the past months. The throughput is fine, but I think the random access time has increased or something. In use I generally see about 1-5mb/sec when loading stuff in Visual Studio and other apps and it doesn't seem like the CPU is bottlenecking as the CPU utilization is pretty low. I don't recall what Access Time used to be, but HD Tune is reporting 12.6ms Read throughput is showing as averaging about 125MB/sec so it should be great for sequential reads. Defrag daily and it shows fragmentation levels low, so that shouldn't be an issue. Additional info, Windows 7 x64, Intel raid controller on mobo, WD Black 500GB (I think 32mb cache) x2.

  Read the article

• Raid0 performance degradation?

  - by davy8

  Not sure if this belongs here or on SuperUser, feel free to move as appropriate. I've noticed the performance on my RAID0 setup seems to have degraded over the past months. The throughput is fine, but I think the random access time has increased or something. In use I generally see about 1-5mb/sec when loading stuff in Visual Studio and other apps and it doesn't seem like the CPU is bottlenecking as the CPU utilization is pretty low. I don't recall what Access Time used to be, but HD Tune is reporting 12.6ms Read throughput is showing as averaging about 125MB/sec so it should be great for sequential reads. Defrag daily and it shows fragmentation levels low, so that shouldn't be an issue. Additional info, Windows 7 x64, Intel raid controller on mobo, WD Black 500GB (I think 32mb cache) x2.

  Read the article

• What causes winsock 10055 errors? How should I troubleshoot?

  - by Tom Kerr

  I'm investigating some issues with winsock 10055 errors on a chain of custom applications (some of which we control, some not) and was hoping to get some advice on techniques to troubleshoot the problem. No buffer space available. An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. From research, non-paged pool and ports seem to be the only resources which can cause this error. Is there another resource which might cause 10055 errors? Currently, we have perfmon counters setup on the applications and non-paged pool usage looks low in most circumstances. Open TCP connections looks low and I am unaware of another way to monitor ports. Since it only happens in production, we are unable to use more invasive counters. Is there some other tool or procedure you would recommend to diagnose which application is causing the issue?

  Read the article

• Round-Robin DNS in mobile networks

  - by k7k0

  After reading load distribution alternatives and giving my limited skills on the area I'm biased toward round-robin DNS strategy. From what I understood, one key aspect of DNS Round-Robin is setting a low TTL value, avoiding caching. My main concern is that all my traffic comes from mobile networks, almost 30% of that comes from t-mobile 3G. Some questions: 1) Is there a chance that almost all clients on the same mobile network will be redirected to the same IP in the TTL frame? That would kill the distribution technique. 2) If I choose a really low TTL (zero or one). That impacts directly over client performance? It does a DNS miss every time or it's a setting that only impacts on DNS servers? Any help would be much appreciated. Thanks

  Read the article

• Find optimal strategy and AI for the game 'Proximity'?

  - by smci

  'Proximity' is a strategy game of territorial domination similar to Othello, Go and Risk. Two players, uses a 10x12 hex grid. Game invented by Brian Cable in 2007. Seems to be a worthy game for discussing a) optimal algorithm then b) how to build an AI. Strategies are going to be probabilistic or heuristic-based, due to the randomness factor, and the insane branching factor (20^120). So it will be kind of hard to compare objectively. A compute time limit of 5s per turn seems reasonable. Game: Flash version here and many copies elsewhere on the web Rules: here Object: to have control of the most armies after all tiles have been placed. Each turn you received a randomly numbered tile (value between 1 and 20 armies) to place on any vacant board space. If this tile is adjacent to any ally tiles, it will strengthen each tile's defenses +1 (up to a max value of 20). If it is adjacent to any enemy tiles, it will take control over them if its number is higher than the number on the enemy tile. Thoughts on strategy: Here are some initial thoughts; setting the computer AI to Expert will probably teach a lot: minimizing your perimeter seems to be a good strategy, to prevent flips and minimize worst-case damage like in Go, leaving holes inside your formation is lethal, only more so with the hex grid because you can lose armies on up to 6 squares in one move low-numbered tiles are a liability, so place them away from your main territory, near the board edges and scattered. You can also use low-numbered tiles to plug holes in your formation, or make small gains along the perimeter which the opponent will not tend to bother attacking. a triangle formation of three pieces is strong since they mutually reinforce, and also reduce the perimeter Each tile can be flipped at most 6 times, i.e. when its neighbor tiles are occupied. Control of a formation can flow back and forth. Sometimes you lose part of a formation and plug any holes to render that part of the board 'dead' and lock in your territory/ prevent further losses. Low-numbered tiles are obvious-but-low-valued liabilities, but high-numbered tiles can be bigger liabilities if they get flipped (which is harder). One lucky play with a 20-army tile can cause a swing of 200 (from +100 to -100 armies). So tile placement will have both offensive and defensive considerations. Comment 1,2,4 seem to resemble a minimax strategy where we minimize the maximum expected possible loss (modified by some probabilistic consideration of the value ß the opponent can get from 1..20 i.e. a structure which can only be flipped by a ß=20 tile is 'nearly impregnable'.) I'm not clear what the implications of comments 3,5,6 are for optimal strategy. Interested in comments from Go, Chess or Othello players. (The sequel ProximityHD for XBox Live, allows 4-player -cooperative or -competitive local multiplayer increases the branching factor since you now have 5 tiles in your hand at any given time, of which you can only play one. Reinforcement of ally tiles is increased to +2 per ally.)

  Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >