Search Results

Search found 8532 results on 342 pages for 'packet examples'.

Page 31/342 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

  • Server 2008/Windows 7/Samba Unspecified error 80004005

    - by ancillary
    I have a Samba share on a LAN with 2008 PDC/DNS. Smb authenticates with AD and I have several Win7 Machines that can connect fine. I recently added a couple of new computers to the LAN which were imaged the same way (same software, etc.; different hardware so different drivers) as the other machines and they have the same policies set. I can not get the new machines to connect to the samba share no matter what. I am always met with either Unspecified Error 0x80004005 or Network Path not found. I've turned off the firewall; set LANMAN auth to respond to NTLM only/send LM & NTLM responses/use NTLM session security if negotiated in Local Sec Policy SEcurity Options; tried both ip and hostname to connect. SMB log shows that authentication succeeds; but then connection is immediately killed by the client. tcpdump shows nothing remarkable except that when trying to connect from the client via hostname there is an unknown packet type error: ack 201 win 255 NBT Session Packet: Unknown packet type 0xABData: (41 bytes) Here's a couple of lines from that error: 11:18:37.964991 IP 001-client.domain.local.49372 > smb.domain.local.netbios-ssn: P 1670:2146(476) ack 201 win 255 NBT Session Packet: Unknown packet type 0xABData: (41 bytes) [000] AA 46 96 FA D5 99 33 75 0C C4 20 CE 26 42 F3 61 \252F\226\372\325\2313u \014\304 \316&B\363a [010] F0 8C FB 65 18 17 40 A5 DB 42 BB 94 37 53 92 EC \360\214\373e\030\027@\245 \333B\273\2247S\222\354 [020] 55 98 7F C4 AE 3D 6B 10 C4 U\230\177\304\256=k\020 \304 11:18:37.964998 IP smb.domain.local.netbios-ssn > 001-client.domain.local.49372: . ack 2146 win 100 Here's smb.conf just in case (though don't see how if other machines are working fine): [global] workgroup = MYDOMAIN realm = MYDOMAIN.LOCAL server string = domain|smb share interfaces = eth1 security = ADS password server = 192.168.1.3 log level = 2 log file = /var/log/samba/%m.log smb ports = 139 strict locking = no load printers = No local master = No domain master = No wins server = 192.168.1.3 wins support = Yes idmap uid = 500-10000000 idmap gid = 500-10000000 winbind separator = + winbind enum users = Yes winbind enum groups = Yes winbind use default domain = Yes [samba-share1] comment = SMB Share path = /home/share/smb/ valid users = @"MYDOMAIN+Domain Users" admin users = @"MYDOMAIN+Domain Admins" guest ok = no read only = No create mask = 0765 force directory mode = 0777 Any ideas what else I could try or look for? Or what might be the problem? Thanks.

    Read the article

  • QtOpenCl make errors. Please help.

    - by Skkard
    So I downloaded the ATI Stream SDK. I don't have a gpu now so I use the '-device cpu' and got the programs/examples in the OpenCl directory working by adding the directory to LD_LIBRARY_PATH etc. Now the problem is when installing QtOpenCl. configure script gives me: skkard@skkard-desktop:~/Applications/qt-labs-opencl$ ./configure This is the QtOpenCL configuration utility. Qt version ............. 4.6.2 qmake .................. /usr/bin/qmake OpenCL ................. yes OpenCL/OpenGL interop .. yes Extra QMAKE_CXXFLAGS ... Extra INCLUDEPATH ...... Extra LIBS ............. -lOpenCL QtOpenCL has been configured. Run '/usr/bin/make' to build. Make gives me: skkard@skkard-desktop:~/Applications/qt-labs-opencl$ make cd src/ && make -f Makefile make[1]: Entering directory `/home/skkard/Applications/qt-labs-opencl/src' cd opencl/ && make -f Makefile make[2]: Entering directory `/home/skkard/Applications/qt-labs-opencl/src/opencl' make[2]: Nothing to be done for `first'. make[2]: Leaving directory `/home/skkard/Applications/qt-labs-opencl/src/opencl' cd openclgl/ && make -f Makefile make[2]: Entering directory `/home/skkard/Applications/qt-labs-opencl/src/openclgl' make[2]: Nothing to be done for `first'. make[2]: Leaving directory `/home/skkard/Applications/qt-labs-opencl/src/openclgl' make[1]: Leaving directory `/home/skkard/Applications/qt-labs-opencl/src' cd examples/ && make -f Makefile make[1]: Entering directory `/home/skkard/Applications/qt-labs-opencl/examples' cd opencl/ && make -f Makefile make[2]: Entering directory `/home/skkard/Applications/qt-labs-opencl/examples/opencl' cd vectoradd/ && make -f Makefile make[3]: Entering directory `/home/skkard/Applications/qt-labs-opencl/examples/opencl/vectoradd' g++ -o vectoradd vectoradd.o qrc_vectoradd.o -L/usr/lib -L../../../lib -L../../../bin -lQtOpenCL -lQtGui -lQtCore -lpthread ../../../lib/libQtOpenCL.so: undefined reference to `clBuildProgram' ../../../lib/libQtOpenCL.so: undefined reference to `clSetCommandQueueProperty' ../../../lib/libQtOpenCL.so: undefined reference to `clEnqueueNDRangeKernel' ../../../lib/libQtOpenCL.so: undefined reference to `clSetKernelArg' ../../../lib/libQtOpenCL.so: undefined reference to `clEnqueueCopyBufferToImage' ../../../lib/libQtOpenCL.so: undefined reference to `clReleaseMemObject' ../../../lib/libQtOpenCL.so: undefined reference to `clFinish' ../../../lib/libQtOpenCL.so: undefined reference to `clEnqueueUnmapMemObject' ../../../lib/libQtOpenCL.so: undefined reference to `clGetMemObjectInfo' ../../../lib/libQtOpenCL.so: undefined reference to `clEnqueueReadImage' ../../../lib/libQtOpenCL.so: undefined reference to `clEnqueueMarker' ../../../lib/libQtOpenCL.so: undefined reference to `clRetainCommandQueue' ../../../lib/libQtOpenCL.so: undefined reference to `clGetCommandQueueInfo' ../../../lib/libQtOpenCL.so: undefined reference to `clEnqueueCopyImage' ../../../lib/libQtOpenCL.so: undefined reference to `clReleaseContext' ../../../lib/libQtOpenCL.so: undefined reference to `clRetainMemObject' ../../../lib/libQtOpenCL.so: undefined reference to `clReleaseEvent' ../../../lib/libQtOpenCL.so: undefined reference to `clEnqueueWriteBuffer' ../../../lib/libQtOpenCL.so: undefined reference to `clEnqueueCopyBuffer' ../../../lib/libQtOpenCL.so: undefined reference to `clEnqueueMapImage' ../../../lib/libQtOpenCL.so: undefined reference to `clEnqueueReadBuffer' ../../../lib/libQtOpenCL.so: undefined reference to `clUnloadCompiler' ../../../lib/libQtOpenCL.so: undefined reference to `clEnqueueBarrier' ../../../lib/libQtOpenCL.so: undefined reference to `clGetProgramBuildInfo' ../../../lib/libQtOpenCL.so: undefined reference to `clEnqueueWaitForEvents' ../../../lib/libQtOpenCL.so: undefined reference to `clRetainProgram' ../../../lib/libQtOpenCL.so: undefined reference to `clCreateContext' ../../../lib/libQtOpenCL.so: undefined reference to `clCreateImage3D' ../../../lib/libQtOpenCL.so: undefined reference to `clEnqueueMapBuffer' ../../../lib/libQtOpenCL.so: undefined reference to `clGetDeviceIDs' ../../../lib/libQtOpenCL.so: undefined reference to `clGetContextInfo' ../../../lib/libQtOpenCL.so: undefined reference to `clGetDeviceInfo' ../../../lib/libQtOpenCL.so: undefined reference to `clReleaseCommandQueue' ../../../lib/libQtOpenCL.so: undefined reference to `clGetSamplerInfo' ../../../lib/libQtOpenCL.so: undefined reference to `clGetPlatformIDs' ../../../lib/libQtOpenCL.so: undefined reference to `clGetSupportedImageFormats' ../../../lib/libQtOpenCL.so: undefined reference to `clGetPlatformInfo' ../../../lib/libQtOpenCL.so: undefined reference to `clWaitForEvents' ../../../lib/libQtOpenCL.so: undefined reference to `clGetEventInfo' ../../../lib/libQtOpenCL.so: undefined reference to `clGetEventProfilingInfo' ../../../lib/libQtOpenCL.so: undefined reference to `clGetImageInfo' ../../../lib/libQtOpenCL.so: undefined reference to `clCreateProgramWithBinary' ../../../lib/libQtOpenCL.so: undefined reference to `clReleaseSampler' ../../../lib/libQtOpenCL.so: undefined reference to `clCreateCommandQueue' ../../../lib/libQtOpenCL.so: undefined reference to `clGetKernelWorkGroupInfo' ../../../lib/libQtOpenCL.so: undefined reference to `clRetainEvent' ../../../lib/libQtOpenCL.so: undefined reference to `clRetainContext' ../../../lib/libQtOpenCL.so: undefined reference to `clCreateSampler' ../../../lib/libQtOpenCL.so: undefined reference to `clReleaseProgram' ../../../lib/libQtOpenCL.so: undefined reference to `clFlush' ../../../lib/libQtOpenCL.so: undefined reference to `clGetProgramInfo' ../../../lib/libQtOpenCL.so: undefined reference to `clCreateKernel' ../../../lib/libQtOpenCL.so: undefined reference to `clRetainKernel' ../../../lib/libQtOpenCL.so: undefined reference to `clEnqueueWriteImage' ../../../lib/libQtOpenCL.so: undefined reference to `clCreateBuffer' ../../../lib/libQtOpenCL.so: undefined reference to `clCreateKernelsInProgram' ../../../lib/libQtOpenCL.so: undefined reference to `clCreateProgramWithSource' ../../../lib/libQtOpenCL.so: undefined reference to `clReleaseKernel' ../../../lib/libQtOpenCL.so: undefined reference to `clRetainSampler' ../../../lib/libQtOpenCL.so: undefined reference to `clCreateImage2D' ../../../lib/libQtOpenCL.so: undefined reference to `clEnqueueCopyImageToBuffer' ../../../lib/libQtOpenCL.so: undefined reference to `clGetKernelInfo' collect2: ld returned 1 exit status make[3]: *** [vectoradd] Error 1 make[3]: Leaving directory `/home/skkard/Applications/qt-labs-opencl/examples/opencl/vectoradd' make[2]: *** [sub-vectoradd-make_default] Error 2 make[2]: Leaving directory `/home/skkard/Applications/qt-labs-opencl/examples/opencl' make[1]: *** [sub-opencl-make_default] Error 2 make[1]: Leaving directory `/home/skkard/Applications/qt-labs-opencl/examples' make: *** [sub-examples-make_default-ordered] Error 2 Tried it using the '-no-openclgl', but none of the examples etc are compiled. I'm using ubuntu 10.04 using the Qt which is installed from synaptic.

    Read the article

  • AddHandler not working?

    - by EdenMachine
    I can't figure out why my addhandler is not firing? In the Sub "CreateTagStyle" thd AddHandler is to firing when the LinkButton is clicked Is there some reason that addhandlers can't be adding at certain points of the page lifecycle? <%@ Page Title="" Language="VB" MasterPageFile="~/_Common/Admin.master" %> <script runat="server"> Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) End Sub Protected Sub RadGrid1_NeedDataSource(ByVal source As Object, ByVal e As Telerik.Web.UI.GridNeedDataSourceEventArgs) If Not e.IsFromDetailTable Then Dim forms As New MB.RequestFormPacket() RadGrid1.DataSource = forms.GetPackets() End If End Sub Protected Sub RadGrid1_DetailTableDataBind(ByVal source As Object, ByVal e As Telerik.Web.UI.GridDetailTableDataBindEventArgs) Select Case e.DetailTableView.Name Case "gtvForms" Dim PacketID As Guid = e.DetailTableView.ParentItem.GetDataKeyValue("ID") e.DetailTableView.DataSource = MB.RequestForm.GetRequestForms(PacketID) End Select End Sub Protected Sub RadGrid1_InsertCommand(ByVal source As Object, ByVal e As Telerik.Web.UI.GridCommandEventArgs) If IsValid Then Select Case TryCast(e.Item.NamingContainer.NamingContainer, GridTableView).Name Case "gtvPackets" Dim rtbName As RadTextBox = TryCast(e.Item.FindControl("rtbName"), RadTextBox) Dim IsActive As Boolean = TryCast(e.Item.FindControl("cbxIsActive"), CheckBox).Checked Dim packet As New MB.RequestFormPacket() packet.Name = rtbName.Text packet.IsActive = IsActive packet.Insert() e.Canceled = True e.Item.OwnerTableView.IsItemInserted = False RadGrid1.Rebind() System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "SuccessMessage('Request Form Packet has been added successfully.');", True) Case "gtvForms" Dim parentItem As GridDataItem = e.Item.OwnerTableView.ParentItem Dim rcbForms As RadComboBox = TryCast(e.Item.FindControl("rcbForms"), RadComboBox) Dim rf As New MB.RequestForm() rf.RequestFormPacketID = CType(parentItem.OwnerTableView.DataKeyValues(parentItem.ItemIndex)("ID"), Guid) rf.FormID = rcbForms.SelectedValue If MB.RequestFormPacket.HasItems(rf.RequestFormPacketID) Then rf.SortOrder = rf.MaxSortOrder + 1 Else rf.SortOrder = 0 End If rf.Insert() e.Canceled = True e.Item.OwnerTableView.IsItemInserted = False TryCast(e.Item.NamingContainer.NamingContainer, GridTableView).Rebind() End Select End If End Sub Protected Sub RadGrid1_UpdateCommand(ByVal source As Object, ByVal e As Telerik.Web.UI.GridCommandEventArgs) If IsValid Then Select Case TryCast(e.Item.NamingContainer, GridTableView).Name Case "gtvPackets" Dim PacketID As Guid = CType(CType(e.CommandSource, Button).NamingContainer, GridEditFormItem).GetDataKeyValue("ID") Dim Name As String = TryCast(e.Item.FindControl("rtbName"), RadTextBox).Text Dim Tags As String = TryCast(e.Item.FindControl("hdnTags"), HiddenField).Value Dim IsActive As Boolean = TryCast(e.Item.FindControl("cbxIsActive"), CheckBox).Checked Dim rfp As New MB.RequestFormPacket() rfp.Update(PacketID, Name, IsActive) Call MB.RequestFormPacketTag.Insert(PacketID, Tags) e.Item.Edit = False TryCast(e.Item.NamingContainer, GridTableView).Rebind() System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "SuccessMessage('Request Form Packet has been updated successfully.');", True) Case "gtvForms" Dim RequestFormID As Guid = CType(CType(e.CommandSource, Button).NamingContainer, GridEditFormItem).GetDataKeyValue("ID") Dim rcbForms As RadComboBox = TryCast(e.Item.FindControl("rcbForms"), RadComboBox) Dim rf As New MB.RequestForm() rf.Update(RequestFormID, rcbForms.SelectedValue) e.Item.Edit = False TryCast(e.Item.NamingContainer, GridTableView).Rebind() End Select End If End Sub Protected Sub RadGrid1_DeleteCommand(ByVal source As Object, ByVal e As Telerik.Web.UI.GridCommandEventArgs) Dim editedItem As GridEditableItem = TryCast(e.Item, GridEditableItem) Select Case CType(editedItem.Parent.Parent, GridTableView).Name Case "gtvPackets" Dim ID As Guid = CType(CType(e.CommandSource, ImageButton).NamingContainer, GridDataItem).GetDataKeyValue("ID") MB.RequestFormPacket.Delete(ID) System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "NotifyMessage('Request Form Packet has been deleted.');", True) Case "gtvForms" Dim ID As Guid = CType(CType(e.CommandSource, ImageButton).NamingContainer, GridDataItem).GetDataKeyValue("ID") MB.RequestForm.Delete(ID) System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "NotifyMessage('Request Form has been removed.');", True) End Select End Sub Protected Sub ibnItemUpArrow_Command(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.CommandEventArgs) Dim gtv As GridTableView = CType(CType(sender, ImageButton).NamingContainer.NamingContainer, GridTableView) Dim ID As Guid = New Guid(e.CommandArgument.ToString()) Call MB.RequestForm.MoveUp(ID) gtv.Rebind() End Sub Protected Sub ibnItemDownArrow_Command(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.CommandEventArgs) Dim gtv As GridTableView = CType(CType(sender, ImageButton).NamingContainer.NamingContainer, GridTableView) Dim ID As Guid = New Guid(e.CommandArgument.ToString()) Call MB.RequestForm.MoveDown(ID) gtv.Rebind() End Sub Protected Sub RadGrid1_RowDrop(ByVal sender As Object, ByVal e As Telerik.Web.UI.GridDragDropEventArgs) If String.IsNullOrEmpty(e.HtmlElement) Then If e.DraggedItems(0).OwnerGridID = RadGrid1.ClientID Then If e.DestDataItem IsNot Nothing Then Dim gtv As GridTableView = CType(e.DestDataItem.NamingContainer, GridTableView) For Each gdi As GridDataItem In e.DraggedItems Select Case gtv.Name Case "gtvForms" MB.RequestForm.DragAndDropReorder(gdi.GetDataKeyValue("ID"), e.DestDataItem.GetDataKeyValue("ID"), IIf(e.DropPosition = GridItemDropPosition.Above, True, False)) gtv.Rebind() End Select Next End If End If End If End Sub Protected Sub cbxAllowDragAndDrop_CheckedChanged(ByVal sender As Object, ByVal e As System.EventArgs) Dim cbx As CheckBox = CType(sender, CheckBox) If cbx.Checked Then RadGrid1.ClientSettings.AllowRowsDragDrop = True RadGrid1.ClientSettings.Selecting.AllowRowSelect = True RadGrid1.ClientSettings.Selecting.EnableDragToSelectRows = True Else RadGrid1.ClientSettings.AllowRowsDragDrop = False RadGrid1.ClientSettings.Selecting.AllowRowSelect = False RadGrid1.ClientSettings.Selecting.EnableDragToSelectRows = False End If End Sub Protected Sub ibnDisableToggleProcess_Click(ByVal sender As Object, ByVal e As System.Web.UI.ImageClickEventArgs) Dim ibn As ImageButton = CType(sender, ImageButton) Dim hdn As HiddenField = CType(ibn.NamingContainer.FindControl("hdnDisableProcessID"), HiddenField) Dim status As Boolean = MB.RequestFormPacket.ActivateToggle(New Guid(hdn.Value)) Dim gtv As GridTableView = CType(ibn.NamingContainer.NamingContainer, GridTableView) gtv.Rebind() System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "SuccessMessage('Process has been " & IIf(status, "Activated", "Deactivated") & ".');", True) End Sub Protected Function DisplayTagList(ByVal tags As IEnumerable(Of MB.RequestFormPacketTag)) As String Dim list As String = "" For Each t As MB.RequestFormPacketTag In tags list += "<span class=""tags"">" & t.Tag.Name & "</span>" Next Return list End Function Protected Sub RadGrid1_ItemDataBound(ByVal sender As Object, ByVal e As Telerik.Web.UI.GridItemEventArgs) Select Case e.Item.GetType.Name Case "GridEditFormInsertItem" 'do nothing Case "GridEditFormItem" Dim plh As PlaceHolder = CType(e.Item.FindControl("plhTags"), PlaceHolder) Dim hdn As HiddenField = CType(e.Item.FindControl("hdnTags"), HiddenField) If hdn IsNot Nothing Then Dim gefi As GridEditFormItem = e.Item Dim packet As MB.RequestFormPacket = gefi.DataItem For Each pt As MB.RequestFormPacketTag In packet.RequestFormPacketTags Call CreateTagStyle(plh, hdn, pt.Tag.Name) If hdn.Value = "" Then hdn.Value = "|" End If hdn.Value += pt.Tag.Name & "|" Next End If End Select End Sub Protected Sub btnAddTag_Click(ByVal sender As Object, ByVal e As System.EventArgs) Dim btnAddTag As Button = sender Dim rtbTags As RadTextBox = btnAddTag.NamingContainer.FindControl("rtbTags") Dim plhTags As PlaceHolder = btnAddTag.NamingContainer.FindControl("plhTags") Dim hdnTags As HiddenField = btnAddTag.NamingContainer.FindControl("hdnTags") Dim TagExists As Boolean = False rtbTags.Text = rtbTags.Text.ToUpper().Trim() Dim currentTags() As String = Split(hdnTags.Value, "|") For i As Integer = 1 To currentTags.Count - 2 Call CreateTagStyle(plhTags, hdnTags, currentTags(i)) Next If TagExists = False And String.IsNullOrEmpty(rtbTags.Text) = False Then Call CreateTagStyle(plhTags, hdnTags, rtbTags.Text) If String.IsNullOrEmpty(hdnTags.Value) Then hdnTags.Value = "|" End If hdnTags.Value += rtbTags.Text & "|" 'System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "highlightTag('" & lbn.ClientID & "');", True) End If rtbTags.Text = "" rtbTags.Focus() End Sub Public Sub RemoveTag(ByVal sender As Object, ByVal e As EventArgs) Response.End() Dim lbnSender As LinkButton = sender Dim plhTags As PlaceHolder = lbnSender.NamingContainer.FindControl("plhTags") Dim hdnTags As HiddenField = lbnSender.NamingContainer.FindControl("hdnTags") Response.Write(hdnTags.Value) Response.End() Dim TagExists As Boolean = False Dim currentTags() As String = Split(hdnTags.Value, "|") For i As Integer = 1 To currentTags.Count - 2 Call CreateTagStyle(plhTags, hdnTags, currentTags(i)) Next End Sub Protected Sub CreateTagStyle(ByVal plh As PlaceHolder, ByVal hdn As HiddenField, ByVal tagName As String) Dim lbn As New LinkButton() lbn.ID = "lbn_" & hdn.ClientID & "_" & tagName lbn.CssClass = "deleteCreateTag" lbn.Text = "X" AddHandler lbn.Click, AddressOf RemoveTag plh.Controls.Add(New LiteralControl("<div><span class=showTag>" & tagName & "</span>")) plh.Controls.Add(lbn) plh.Controls.Add(New LiteralControl("</div>")) End Sub </script> <asp:Content ID="Content1" ContentPlaceHolderID="head" Runat="Server"> <style type="text/css"> .tags { border:solid 1px #93AFE5; background-color:#F3F7F8; margin: 0px 2px 0px 2px; padding: 0px 4px 0px 4px; font-family:Verdana; font-size:10px; text-transform:uppercase; } </style> <script type="text/javascript"> function highlightTag(id) { $("#" + id).highlightFade({ color: '#FFFF99', speed: 2000, iterator: 'sinusoidal' }); } </script> </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server"> <telerik:RadAjaxManager ID="RadAjaxManager1" runat="server" DefaultLoadingPanelID="RadAjaxLoadingPanel1" EnableAJAX="false"> <AjaxSettings> <telerik:AjaxSetting AjaxControlID="RadGrid1"> <UpdatedControls> <telerik:AjaxUpdatedControl ControlID="RadGrid1" /> </UpdatedControls> </telerik:AjaxSetting> </AjaxSettings> </telerik:RadAjaxManager> <telerik:RadAjaxLoadingPanel ID="RadAjaxLoadingPanel1" runat="server" /> <telerik:RadTabStrip ID="RadTabStrip1" runat="server" Skin="WebBlue" style="position:relative;top:1px;" ValidationGroup="vgTabs"> <Tabs> <telerik:RadTab Text="Request Form Packets" Selected="true" ImageUrl="~/Admin/Images/Packet2.png" /> <telerik:RadTab Text="Request Forms" NavigateUrl="Forms.aspx" ImageUrl="~/Admin/Images/Forms.png" /> </Tabs> </telerik:RadTabStrip> <asp:ObjectDataSource ID="odsForms" runat="server" TypeName="MB.Form" SelectMethod="GetForms" /> <asp:Panel ID="pnlContent" runat="server" CssClass="ContentPanel"> <telerik:RadGrid ID="RadGrid1" runat="server" AllowPaging="True" AllowSorting="True" GridLines="None" OnNeedDataSource="RadGrid1_NeedDataSource" AllowAutomaticUpdates="true" AllowAutomaticDeletes="true" AllowAutomaticInserts="true" OnInsertCommand="RadGrid1_InsertCommand" OnUpdateCommand="RadGrid1_UpdateCommand" OnDeleteCommand="RadGrid1_DeleteCommand" OnRowDrop="RadGrid1_RowDrop" OnDetailTableDataBind="RadGrid1_DetailTableDataBind" OnItemDataBound="RadGrid1_ItemDataBound"> <%-----------------------------------------------------------%> <%------------------------- PACKETS -------------------------%> <%-----------------------------------------------------------%> <MasterTableView AutoGenerateColumns="False" DataKeyNames="ID" ClientDataKeyNames="ID" ShowHeadersWhenNoRecords="true" Name="gtvPackets" NoMasterRecordsText="There are currently no Request Form Packets" GroupLoadMode="Client" RetrieveNullAsDBNull="true" CommandItemDisplay="Top" AllowAutomaticUpdates="true" AllowAutomaticDeletes="true" AllowAutomaticInserts="true"> <RowIndicatorColumn> <HeaderStyle Width="20px"></HeaderStyle> </RowIndicatorColumn> <ExpandCollapseColumn> <HeaderStyle Width="20px"></HeaderStyle> </ExpandCollapseColumn> <CommandItemTemplate> <table width="100%"> <tr> <td class="AdminGridHeader">&nbsp;<img src="../Admin/Images/Packet2.png" align="absmiddle" width="16" height="16" />&nbsp;&nbsp;Request Form Packets</td> <td width="1%"><asp:CheckBox ID="cbxAllowDragAndDrop" runat="server" AutoPostBack="true" OnCheckedChanged="cbxAllowDragAndDrop_CheckedChanged" /></td> <td width="1%" nowrap="nowrap"><asp:Label AssociatedControlID="cbxAllowDragAndDrop" ID="Label1" runat="server" Text="Enable Drag and Drop Reordering" ToolTip="Drag and Drop Reordering applies only to Forms." /></td> <td align="right" width="1%"><asp:Button ID="btnAddPacket" Text="Create New Packet" runat="server" CommandName="InitInsert" /></td> </tr> </table> </CommandItemTemplate> <EditFormSettings> <EditColumn ButtonType="PushButton" HeaderStyle-Font-Bold="true" UniqueName="EditCommandColumn" /> </EditFormSettings> <EditItemStyle Font-Bold="true" BackColor="#FFFFCC" /> <Columns> <telerik:GridTemplateColumn HeaderText="Packet Name" UniqueName="PacketName" SortExpression="Name"> <ItemTemplate> <img src="../Admin/Images/Packet2.png" align="absmiddle" width="16" height="16" />&nbsp;&nbsp;<%#Eval("Name")%> </ItemTemplate> <EditItemTemplate> <telerik:RadTextBox runat="server" ID="rtbName" Width="300" Text='<%# Bind("Name") %>' /> <asp:RequiredFieldValidator ID="rfvName" runat="server" ErrorMessage="Required" ControlToValidate="rtbName" /> </EditItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderText="Tags" UniqueName="Tags"> <ItemTemplate> <%#DisplayTagList(Eval("RequestFormPacketTags"))%> </ItemTemplate> <EditItemTemplate> <asp:Panel ID="pnlAddTags" runat="server" DefaultButton="btnAddTag"> <table cellpadding="0" cellspacing="0"> <tr> <td> <telerik:RadTextBox ID="rtbTags" runat="server" Width="200" style="text-transform:uppercase;" /> <asp:RegularExpressionValidator ID="revTags" runat="server" ErrorMessage="Invalid Entry" ControlToValidate="rtbTags" Display="Dynamic" ValidationExpression="^[^<>`~!/@\#}$%:;)(_^{&*=|+]+$" ValidationGroup="vgTags" /> </td> <td> <asp:Button ID="btnAddTag" runat="server" ValidationGroup="vgTags" Text="Add" OnClick="btnAddTag_Click" /> </td> </tr> </table> </asp:Panel> <div id="divTags"> <asp:PlaceHolder id="plhTags" runat="server" /> <asp:HiddenField ID="hdnTags" runat="server" /> </div> </EditItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderTooltip="Disable" ItemStyle-Width="1%" ItemStyle-HorizontalAlign="Center" SortExpression="IsActive" UniqueName="IsActive" ReadOnly="true"> <ItemTemplate> <asp:ImageButton ID="ibnDisabledProcess" runat="server" ImageUrl="../Images/Icons/Stop.png" Width="16" OnClientClick="return window.confirm('Activate this Process?');" ToolTip="Click to activate this Request for Account use." Visible='<%#IIF(Eval("IsActive"),false,true) %>' OnClick="ibnDisableToggleProcess_Click" /> <asp:ImageButton ID="ibnEnabledProcess" runat="server" ImageUrl="../Images/Icons/Stop_disabled.png" Width="16" OnClientClick="return window.confirm('Deactivate this Process?');" ToolTip="Click to deactivate this Request for Account use." Visible='<%#IIF(Eval("IsActive"),true,false) %>' OnClick="ibnDisableToggleProcess_Click" /> <asp:HiddenField ID="hdnDisableProcessID" runat="server" Value='<%#Eval("ID") %>' /> </ItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderText="Is Active" UniqueName="IsActiveCheckbox" Display="false"> <EditItemTemplate> <asp:CheckBox ID="cbxIsActive" runat="server" Checked='<%# IIF(Eval("IsActive") Is DbNull.Value OrElse Eval("IsActive") = False,False,True) %>' /> </EditItemTemplate> </telerik:GridTemplateColumn> <telerik:GridEditCommandColumn ButtonType="ImageButton" EditText="Edit Admin" ItemStyle-Width="16" EditImageUrl="~/Images/edit-small.png" /> <telerik:GridButtonColumn ConfirmText="Do you really want to delete this Admin? WARNING: THIS CANNOT BE UNDONE!!" ConfirmDialogType="RadWindow" ConfirmTitle="Delete" ButtonType="ImageButton" CommandName="Delete" Text="Delete Admin" ImageUrl="~/Images/Delete.png" UniqueName="DeleteColumn"> <ItemStyle HorizontalAlign="Center" Width="16" /> </telerik:GridButtonColumn> </Columns> <DetailTables> <%-----------------------------------------------------------%> <%-------------------------- FORMS --------------------------%> <%-----------------------------------------------------------%> <telerik:GridTableView Name="gtvForms" AllowPaging="true" PagerStyle-Position="TopAndBottom" PageSize="20" AutoGenerateColumns="false" DataKeyNames="RequestFormPacketID,ID" runat="server" CommandItemDisplay="Top" Width="100%"> <ParentTableRelation> <telerik:GridRelationFields DetailKeyField="RequestFormPacketID" MasterKeyField="ID" /> </ParentTableRelation> <CommandItemTemplate> <table width="100%" class="AdminGridHeaders"> <tr> <td class="AdminGridHeaders"> &nbsp;<img src="../Admin/Images/Forms.png" align="absmiddle" width="16" height="16" />&nbsp;&nbsp;Forms </td> <td align="right"> <asp:Button ID="ibnAdd" runat="server" Text="Add Form" CommandName="InitInsert" /> </td> </tr> </table> </CommandItemTemplate> <EditFormSettings> <EditColumn ButtonType="PushButton" InsertText="Save" UpdateText="Update" CancelText="Cancel" /> </EditFormSettings> <EditItemStyle Font-Bold="true" BackColor="#FFFFCC" /> <Columns> <telerik:GridTemplateColumn HeaderText="Form Name" UniqueName="FormName"> <ItemTemplate> <img src="../Admin/Images/Forms.png" align="absmiddle" width="16" height="16" style="margin-right:4px;" /> <%#Eval("Form.Name")%> </ItemTemplate> <EditItemTemplate> <telerik:RadComboBox ID="rcbForms" runat="server" DataSourceID="odsForms" AppendDataBoundItems="true" DataTextField="Name" DataValueField="ID" SelectedValue='<%#Bind("FormID")%>'> <Items> <telerik:RadComboBoxItem Text="-- Select a Form --" Value="" /> </Items> </telerik:RadComboBox> <asp:RequiredFieldValidator ID="rfvForms" runat="server" ErrorMessage="Required" ControlToValidate="rcbForms" InitialValue="-- Select a Form --" Display="Dynamic" /> </EditItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderText="Test" ReadOnly="true" UniqueName="TestForm" HeaderStyle-Width="1%" ItemStyle-HorizontalAlign="Center"> <ItemTemplate> <asp:HyperLink ID="hypTestForm" runat="server" NavigateUrl='<%# "FormsPreview.aspx?fid=" & Eval("FormID").ToString() & "&test=true" %>' Target="_blank"><asp:Image ID="imgTestProcess" runat="server" ImageUrl="~/Admin/Images/Test.png" ImageAlign="AbsMiddle" ToolTip="Test Form" /></asp:HyperLink> </ItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderText="Header" SortExpression="Header" UniqueName="Header"> <ItemTemplate> <%#Eval("Form.Header")%>&nbsp; </ItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn ReadOnly="true" ItemStyle-HorizontalAlign="Center" HeaderStyle-Width="1%" HeaderStyle-Wrap="false" ItemStyle-Wrap="false" UniqueName="SortOrder"> <ItemTemplate> <asp:ImageButton ID="ibnItemUpArrow" runat="server" Width="16" height="16" ImageUrl="~/Admin/Images/ArrowUp.png" ImageAlign="AbsMiddle" Visible='<%#IIF(Eval("SortOrder") = 0,false,true) %>' CommandArgument='<%#Eval("ID") %>' OnCommand=

    Read the article

  • Ubuntu 9.10 RSA authentication: ssh fails, filezilla runs fine

    - by MariusPontmercy
    This is quite a mistery for me. I usually use passwordless RSA authentication to login into my remote *nix servers with ssh and sftp. Never had any problem until now. I cannot connect to an Ubuntu 9.10 machine: user@myclient$ ssh -i .ssh/Ganymede_key [email protected] [...] debug1: Host 'ganymede.server.com' is known and matches the RSA host key. debug1: Found key in /home/user/.ssh/known_hosts:14 debug2: bits set: 494/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: .ssh/Ganymede_key (0xb96a0ef8) debug2: key: .ssh/Ganymede_key ((nil)) debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: publickey debug1: Offering public key: .ssh/Ganymede_key debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Trying private key: .ssh/Ganymede_key debug1: read PEM private key done: type RSA debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password,keyboard-interactive debug2: we did not send a packet, disable method debug1: Next authentication method: keyboard-interactive debug2: userauth_kbdint debug2: we sent a keyboard-interactive packet, wait for reply debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 1 Then it falls back to password authentication. If I disable password authentication on the remote machine my connection attempt just fails with a "Permission denied (publickey)." state. Same thing for sftp from command line. The "funny" thing is that the exact same RSA key works like a charm with a Filezilla sftp session instead: 12:08:00 Trace: Offered public key from "/home/user/.filezilla/keys/Ganymede_key" 12:08:00 Trace: Offer of public key accepted, trying to authenticate using it. 12:08:01 Trace: Access granted 12:08:01 Trace: Opened channel for session 12:08:01 Trace: Started a shell/command 12:08:01 Status: Connected to ganymede.server.com 12:08:02 Trace: CSftpControlSocket::ConnectParseResponse() 12:08:02 Trace: CSftpControlSocket::ResetOperation(0) 12:08:02 Trace: CControlSocket::ResetOperation(0) 12:08:02 Status: Retrieving directory listing... 12:08:02 Trace: CSftpControlSocket::SendNextCommand() 12:08:02 Trace: CSftpControlSocket::ChangeDirSend() 12:08:02 Command: pwd 12:08:02 Response: Current directory is: "/root" 12:08:02 Trace: CSftpControlSocket::ResetOperation(0) 12:08:02 Trace: CControlSocket::ResetOperation(0) 12:08:02 Trace: CSftpControlSocket::ParseSubcommandResult(0) 12:08:02 Trace: CSftpControlSocket::ListSubcommandResult() 12:08:02 Trace: CSftpControlSocket::ResetOperation(0) 12:08:02 Trace: CControlSocket::ResetOperation(0) 12:08:02 Status: Directory listing successful Any thoughts? M

    Read the article

  • Ipsec config problem // openswan

    - by user90696
    I try to configure Ipsec on server with openswan as client. But receive error - possible, it's auth error. What I wrote wrong in config ? Thank you for answers. #1: STATE_MAIN_I2: sent MI2, expecting MR2 003 "f-net" #1: received Vendor ID payload [Cisco-Unity] 003 "f-net" #1: received Vendor ID payload [Dead Peer Detection] 003 "f-net" #1: ignoring unknown Vendor ID payload [ca917959574c7d5aed4222a9df367018] 003 "f-net" #1: received Vendor ID payload [XAUTH] 108 "f-net" #1: STATE_MAIN_I3: sent MI3, expecting MR3 003 "f-net" #1: discarding duplicate packet; already STATE_MAIN_I3 010 "f-net" #1: STATE_MAIN_I3: retransmission; will wait 20s for response 003 "f-net" #1: discarding duplicate packet; already STATE_MAIN_I3 003 "f-net" #1: discarding duplicate packet; already STATE_MAIN_I3 003 "f-net" #1: discarding duplicate packet; already STATE_MAIN_I3 010 "f-net" #1: STATE_MAIN_I3: retransmission; will wait 40s for response 031 "f-net" #1: max number of retransmissions (2) reached STATE_MAIN_I3. Possible authentication failure: no acceptable response to our first encrypted message 000 "f-net" #1: starting keying attempt 2 of at most 3, but releasing whack other side - Cisco ASA. parameters for my connection on our Linux server : VPN Gateway 8.*.*.* (Cisco ) Phase 1 Exchange Type Main Mode Identification Type IP Address Local ID 4.*.*.* (our Linux server IP) Remote ID 8.*.*.* (VPN server IP) Authentication PSK Pre Shared Key Diffie-Hellman Key Group DH 5 (1536 bit) or DH 2 (1024 bit) Encryption Algorithm AES 256 HMAC Function SHA-1 Lifetime 86.400 seconds / no volume limit Phase 2 Security Protocol ESP Connection Mode Tunnel Encryption Algorithm AES 256 HMAC Function SHA-1 Lifetime 3600 seconds / 4.608.000 kilobytes DPD / IKE Keepalive 15 seconds PFS off Remote Network 192.168.100.0/24 Local Network 1 10.0.0.0/16 ............... Local Network 5 current openswan config : # config setup klipsdebug=all plutodebug="control parsing" protostack=netkey nat_traversal=no virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off nhelpers=0 conn f-net type=tunnel keyexchange=ike authby=secret auth=esp esp=aes256-sha1 keyingtries=3 pfs=no aggrmode=no keylife=3600s ike=aes256-sha1-modp1024 # left=4.*.*.* leftsubnet=10.0.0.0/16 leftid=4.*.*.* leftnexthop=%defaultroute right=8.*.*.* rightsubnet=192.168.100.0/24 rightid=8.*.*.* rightnexthop=%defaultroute auto=add

    Read the article

  • Why RSA SSH authentication only works after console log-in?

    - by smorhaim
    I setup RSA authentication on one of my Ubuntu servers, however after every restart, I can't log-in via ssh RSA. In order to log-in with ssh I need to first log-in via console, then the RSA starts working. Why??? Below are my sshd config file as well as an output from the ssh -vv command before console log-in and after. . Before console log-in: debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /Users/smorhaim/.ssh/smorhaim (0x7ff8d8c242c0) debug2: key: /Users/smorhaim/.ssh/id_rsaadmin (0x7ff8d8c24cf0) debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /Users/smorhaim/.ssh/smorhaim debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey debug1: Offering RSA public key: /Users/smorhaim/.ssh/id_rsaadmin debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey debug2: we did not send a packet, disable method debug1: No more authentication methods to try. Permission denied (publickey). After console log-in: debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /Users/smorhaim/.ssh/smorhaim (0x7f91c14242c0) debug2: key: /Users/smorhaim/.ssh/id_rsaadmin (0x7f91c1424ae0) debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /Users/smorhaim/.ssh/smorhaim debug2: we sent a publickey packet, wait for reply debug1: Server accepts key: pkalg ssh-rsa blen 279 debug2: input_userauth_pk_ok: fp b1:d5:90:43:be:43:52:a9:7f:05:c7:04:86:57:b3:ff debug1: Authentication succeeded (publickey). Authenticated to 10.10.30.151 ([10.10.30.151]:22). sshd config: Port 22 Protocol 2 ListenAddress 10.10.30.151 UsePrivilegeSeparation yes SyslogFacility AUTHPRIV PermitRootLogin no PasswordAuthentication no ChallengeResponseAuthentication no UsePAM yes X11Forwarding yes

    Read the article

  • HTTP Upload Problems

    - by jfoster
    We are running a marketplace on ColdFusion8 and IIS with a widely geographically distributed user base and have been receiving complaints of issues with some HTTP uploads. Most of the complaints are coming from geographically distant locations from our main datacenter on the US east coast. I've attempted to upload the same 70MB file from a US West coast test server to both our main site and a backup running the same code on a different network route and I saw the same issues fairly consistently in both places, so I've ruled out the code, route, and internal network errors. I've also tested uploads using both the native cf upload tag and a third party tool called SaFileUp. I saw the same issues with both upload tools, so I also don't think this is necessarily a ColdFusion problem. I don't have any problems uploading the test file from the East coast to other east coast servers, so I'm beginning to think that the distance between our users and our equipment is a factor. I've also found that smaller files are more likely to succeed than large ones (< 10MB) I tried the test upload with both IE and FF and did notice a difference in the way that the browsers seemed to handle packet errors. IE seemed to have a tough time continuing an upload after dropped / bad packets, whereas FF seemed to have the ability to gracefully resume an upload after experiencing packet problems. Has anyone experienced similar issues? Is there anything we can do on our side to make uploads more forgiving to packet loss or resumable after an error? A different upload tool etc… Do we need upload servers in more than one location to shorten the network routes between clients and servers? Does anyone think that switching uploads to SSL will help (no layer7 packet sniffing may lead to a smoother upload). Thanks.

    Read the article

  • Windows AD DNS: Event ID 5504

    - by Chris_K
    Two of my AD controllers (both running DNS service) appear to be having a similar issue. Both are throwing lots of events in the DNS events that look like this: Event Type: Information Event Source: DNS Event Category: None Event ID: 5504 Date: 5/24/2010 Time: 11:51:38 AM User: N/A Computer: ALPHA Description: The DNS server encountered an invalid domain name in a packet from 76.74.137.6. The packet will be rejected. The event data contains the DNS packet. That will come with the same event, same time, with a packet from 76.74.137.7 as well. I know this is "Information" not an error, but since it is new and different it bothers me (yes, I fear unexplained change!) Both machines are running Windows 2003 R2 SP2. The DNS servers are not exposed to the internet. Both DNS servers are configured to use OpenDNS for Forwarders. For both servers, this started about a week ago. Any thoughts on: 1) should I be concerned? 2) how can I stop/fix this? To keep it interesting, I have a 3rd AD / DNS box. Same domain, different Active Directory site. Same forwarders, yet doesn't have this issue.

    Read the article

  • Iptables: "-p udp --state ESTABLISHED"

    - by chris_l
    Hi, let's look at these two iptables rules which are often used to allow outgoing DNS: iptables -A OUTPUT -p udp --sport 1024:65535 --dport 53 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -p udp --sport 53 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT My question is: How exactly should I understand the ESTABLISHED state in UDP? UDP is stateless. Here is my intuition - I'd like to know, if or where this is incorrect: The man page tells me this: state This module, when combined with connection tracking, allows access to the connection tracking state for this packet. --state ... So, iptables basically remembers the port number that was used for the outgoing packet (what else could it remember for a UDP packet?), and then allows the first incoming packet that is sent back within a short timeframe? An attacker would have to guess the port number (would that really be too hard?) About avoiding conflicts: The kernel keeps track of which ports are blocked (either by other services, or by previous outgoing UDP packets), so that these ports will not be used for new outgoing DNS packets within the timeframe? (What would happen, if I accidentally tried to start a service on that port within the timeframe - would that attempt be denied/blocked?) Please find all errors in the above text :-) Thanks, Chris

    Read the article

  • SSH into remote server using Public-private keys

    - by maria
    Hi, I have recently setup ssh on two linux machines (lets call them server-a, client-b). I have generated two ssh auth files on client-b machine using ssh key gen and can see both public and private files in .ssh dir. I have named them 'example' and 'example.pub'. Then I have added example.pub to sever-a's auth file. When I try to ssh into server-a it still requests a password authentication where as I want a password less login (private key on client-b is setup without password). When I try to ssh with '-v' .. get the following output: debug1: Next authentication method: publickey debug1: Trying private key: /Users/abc/.ssh/identity debug1: Offering public key: /Users/abc/.ssh/id_rsa debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Offering public key: /Users/abc/.ssh/id_dsa debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,keyboard-interactive debug2: we did not send a packet, disable method debug1: Next authentication method: keyboard-interactive debug2: userauth_kbdint debug2: we sent a keyboard-interactive packet, wait for reply debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 1 Password: Please help.

    Read the article

  • SSH multi-hop connections with netcat mode proxy

    - by aef
    Since OpenSSH 5.4 there is a new feature called natcat mode, which allows you to bind STDIN and STDOUT of local SSH client to a TCP port accessible through the remote SSH server. This mode is enabled by simply calling ssh -W [HOST]:[PORT] Theoretically this should be ideal for use in the ProxyCommand setting in per-host SSH configurations, which was previously often used with the nc (netcat) command. ProxyCommand allows you to configure a machine as proxy between you local machine and the target SSH server, for example if the target SSH server is hidden behind a firewall. The problem now is, that instead of working, it throws a cryptic error message in my face: Bad packet length 1397966893. Disconnecting: Packet corrupt Here is an excerpt from my ~/.ssh/config: Host * Protocol 2 ControlMaster auto ControlPath ~/.ssh/cm_socket/%r@%h:%p ControlPersist 4h Host proxy-host proxy-host.my-domain.tld HostName proxy-host.my-domain.tld ForwardAgent yes Host target-server target-server.my-domain.tld HostName target-server.my-domain.tld ProxyCommand ssh -W %h:%p proxy-host ForwardAgent yes As you can see here, I'm using the ControlMaster feature so I don't have to open more than one SSH connection per-host. The client machine I tested this with is an Ubuntu 11.10 (x86_64) and both proxy-host and target-server are Debian Wheezy Beta 3 (x86_64) machines. The error happens when I call ssh target-server. When I call it with the -v flag, here is what I get additionally: OpenSSH_5.8p1 Debian-7ubuntu1, OpenSSL 1.0.0e 6 Sep 2011 debug1: Reading configuration data /home/aef/.ssh/config debug1: Applying options for * debug1: Applying options for target-server.my-domain.tld debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: auto-mux: Trying existing master debug1: Control socket "/home/aef/.ssh/cm_socket/[email protected]:22" does not exist debug1: Executing proxy command: exec ssh -W target-server.my-domain.tld:22 proxy-host.my-domain.tld debug1: identity file /home/aef/.ssh/id_rsa type -1 debug1: identity file /home/aef/.ssh/id_rsa-cert type -1 debug1: identity file /home/aef/.ssh/id_dsa type -1 debug1: identity file /home/aef/.ssh/id_dsa-cert type -1 debug1: identity file /home/aef/.ssh/id_ecdsa type -1 debug1: identity file /home/aef/.ssh/id_ecdsa-cert type -1 debug1: permanently_drop_suid: 1000 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.0p1 Debian-3 debug1: match: OpenSSH_6.0p1 Debian-3 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8p1 Debian-7ubuntu1 debug1: SSH2_MSG_KEXINIT sent Bad packet length 1397966893. Disconnecting: Packet corrupt

    Read the article

  • Cisco IOS BVI ACL: Only allow established UDP

    - by George Bailey
    Related: Cisco IOS ACL: Don't permit incoming connections just because they are from port 80 I know we can use the established keyword for TCP.. but what can we do for UDP (short of replacing a Bridge or BVI with a NAT)? Answer I found out what "UDP has no connection" means. DNS uses UDP for example.. named (DNS server) is lisenting on port 53 nslookup (DNS client) starts listening on some random port and sends a packet to port 53 of the server and notes the source port in that packet. nslookup will retry 3 times if necessary. Also the packets are so small that it does not have to worry about them coming in the wrong order. If nslookup receives a response on that port that comes from the servers IP and port then it stops listening. If the server tried to send two responses (for example a response and a response to the retry) then the server would not care if either of them made it because the client has the job to retry. In fact.. unless ICMP 3/3 packet gets through the server would not know about a failure. This is different from TCP where you get connection closed or timed out errors. DNS allows for an easy retry from the client as well as small packets.. so UDP is an excellent choice because it is more efficient. In UDP you would see nslookup sends request named sends answer In TCP you would see nslookup's machine sends SYN named's machine sends SYN-ACK nslookup's machine sends ACK and the request named's machine sends the response That is much more than is necessary for a tiny DNS packet

    Read the article

  • server dosnt produce syn-ack

    - by steve
    I have a small program that take packets from the nfqueue . change the ip.dst to my server dst (and ttl), recalc checksum and return the packet to the nfqueue. The server and the client are linux and apache web server is run on the server and listen on port 80. i open telnet in the client to fake ip on port 80 . the packet is changed by my program and sent to the server, but the target server (the new dst ip) get the syn , but dosnt generate syn-ack (the server also belong to me , so i can see that it get the syn with checksum correct , but dosnt generate syn-ack). if i do the same , but with the real server ip as the dest, the tcp handshake is done correct (in this case i just change the ttl and checksum. The change that i did to the ttl is just a test to see that my checksum calc is ok). i compare the sys's , but didnt find and difference. Any idea? Ps. i saw this topic : Server not sending a SYN/ACK packet in response to a SYN packet and i set all flags the same , but this didnt help. Thank you

    Read the article

  • WOL doesn't work if set to anything other than `a` but this setting makes it boot all the time

    - by Elton Carvalho
    I manage a small "cluster" of 4 Xeon machines with Intel boards in my lab. They are all plugged to a 5-port 3-Com switch with static IP addresses like 10.0.0.x. They are all running OpenSuse 11.4 and their /home/ is served by one of the machines (node00) via NFS. They are plugged to an UPS that can keep them on for ca. 15 minutes, but there are lots of electric shortages due to "unscheduled maintenace" that are longer than this. So they end up being powered down without notice. If I set the BIOS to turn them on after power shortages, the issue is that they all boot at the same time and, if node00 decides to run fsck in the /home/ partition, it does not finish booting before the others try to NFS mount their /home/. I am trying to make wake on lan work, so I can choose to boot the NFS clients only after the server has successfully booted. The problem is that when I run ethtool I get an output like this: Supports Wake-on: pumbag Wake-on: g Theoretically, it is set to wake on MagicPacket(tm), according to the manual. But sending the WOL packet using wol -i 10.0.0.255 $MACADDR does not wake up the box after I shut it down with halt. The ethernet link led blinks after I send the packet, so it appears to be getting to the machine. However, if I set it up with ethtool -s eth1 wol bag, the machine always wakes up right after halting, even if I don't send the Magic packet. This means that the device can wake up with LAN activity, but seems to be ignoring the magic packet. Setting wol ag does not wake the box with the MagicPacket. Does setting wol a mean that it should boot with any broadcast message? How can I diagnose the issue of the machine not waking up with the MagicPacket even though I am sending it and it's set up to wake up with it? Thanks in advance!

    Read the article

  • Ubuntu 9.10 RSA authentication: ssh fails, filezilla runs fine

    - by MariusPontmercy
    This is quite a mistery for me. I usually use passwordless RSA authentication to login into my remote *nix servers with ssh and sftp. Never had any problem until now. I cannot connect to an Ubuntu 9.10 machine: user@myclient$ ssh -i .ssh/Ganymede_key [email protected] [...] debug1: Host 'ganymede.server.com' is known and matches the RSA host key. debug1: Found key in /home/user/.ssh/known_hosts:14 debug2: bits set: 494/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: .ssh/Ganymede_key (0xb96a0ef8) debug2: key: .ssh/Ganymede_key ((nil)) debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: publickey debug1: Offering public key: .ssh/Ganymede_key debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Trying private key: .ssh/Ganymede_key debug1: read PEM private key done: type RSA debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password,keyboard-interactive debug2: we did not send a packet, disable method debug1: Next authentication method: keyboard-interactive debug2: userauth_kbdint debug2: we sent a keyboard-interactive packet, wait for reply debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 1 Then it falls back to password authentication. If I disable password authentication on the remote machine my connection attempt just fails with a "Permission denied (publickey)." state. Same thing for sftp from command line. The "funny" thing is that the exact same RSA key works like a charm with a Filezilla sftp session instead: 12:08:00 Trace: Offered public key from "/home/user/.filezilla/keys/Ganymede_key" 12:08:00 Trace: Offer of public key accepted, trying to authenticate using it. 12:08:01 Trace: Access granted 12:08:01 Trace: Opened channel for session 12:08:01 Trace: Started a shell/command 12:08:01 Status: Connected to ganymede.server.com 12:08:02 Trace: CSftpControlSocket::ConnectParseResponse() 12:08:02 Trace: CSftpControlSocket::ResetOperation(0) 12:08:02 Trace: CControlSocket::ResetOperation(0) 12:08:02 Status: Retrieving directory listing... 12:08:02 Trace: CSftpControlSocket::SendNextCommand() 12:08:02 Trace: CSftpControlSocket::ChangeDirSend() 12:08:02 Command: pwd 12:08:02 Response: Current directory is: "/root" 12:08:02 Trace: CSftpControlSocket::ResetOperation(0) 12:08:02 Trace: CControlSocket::ResetOperation(0) 12:08:02 Trace: CSftpControlSocket::ParseSubcommandResult(0) 12:08:02 Trace: CSftpControlSocket::ListSubcommandResult() 12:08:02 Trace: CSftpControlSocket::ResetOperation(0) 12:08:02 Trace: CControlSocket::ResetOperation(0) 12:08:02 Status: Directory listing successful Any thoughts? M

    Read the article

  • TCP/UDP hole punching from and to the same NAT network

    - by Luc
    I was wondering if tcp/udp hole punching would still work when you are in the same network (behind a NAT), and what the packet's path would be. What happens when using hole punching on the same network, is that it will send a packet out with the same destination and source address. Only the source and destination port would differ. I imagine a router with NAT loopback enabled will handle this as it should, but how about other routers? Would they drop the packet, or would a router (the first?) from the ISP bounce the packet back after which it gets handled okay? I'm wondering because I was thinking about using this technique to circumvent a block between peers in a network (like a school network where clients can only access the internet, but any contact with each other is blocked). The only other option is to use a man in the middle as proxy (tunnel?). The disadvantage of this is that you have to have a server with significantly more bandwidth than one that would only do hole punching. Also the latency would increase significantly.

    Read the article

  • cisco asa + action drop issue

    - by ghp
    Have created a tunnel between 10.x.y.z network and 122.a.b.c ..the tunnel is up and active, but when I try the packet tracer output ..I get the ACTION as drop. I have also enabled same-security-traffic permit intra-interface. Can someone help me what does this drop mean? Result: input-interface: inside input-status: up input-line-status: up output-interface: outside output-status: up output-line-status: up Action: drop Drop-reason: (acl-drop) Flow is denied by configured rule Packet Tracer output @Shane Madden: please find below the packet tracer output. CASA5K-A# CASA5K-A# config t CASA5K-A(config)# packet-tracer input inside tcp 10.x.y.112 0 122.a.b.c 0 Phase: 1 Type: ROUTE-LOOKUP Subtype: input Result: ALLOW Config: Additional Information: in 0.0.0.0 0.0.0.0 outside Phase: 2 Type: ACCESS-LIST Subtype: Result: DROP Config: Implicit Rule Additional Information: Result: input-interface: inside input-status: up input-line-status: up output-interface: outside output-status: up output-line-status: up Action: drop Drop-reason: (acl-drop) Flow is denied by configured rule CASA5K-A(config)# ======================================================================== The access-group are as follows : access-group acl-inbound in interface outside access-group acl-outbound in interface inside and the access-list's are access-list acl-inbound extended permit tcp any any gt 1023 access-list acl-outbound extended permit ip object-group net-Source object net-dest

    Read the article

  • ErrorException [ Fatal Error ]: Class 'Controller' not found - Kohana 3.0.3 Error

    - by Asif
    Hi, I am (newbie) using Kohana V 3.0.3 and my directory structure is: pojectsys (kohana's system directory) parallel to htdocs directory C:\xampp\pojectsys and my application directory is in htdocs C:\xampp\htdocs\examples Inside C:\xampp\htdocs\examples\index.php, following variables have been set: $application = 'C:\xampp\htdocs\examples\application'; $system = 'C:\xampp\pojectsys'; Now when I am trying to execute http://lc.examples.com/ then Kohana returns error: ErrorException [ Fatal Error ]: Class 'Controller' not found for line 3 class Controller_Welcome extends Controller { Please help me to resolve this issue.

    Read the article

  • Installing my sdist from PyPI puts the files in the wrong places

    - by Tartley
    Hey. My problem is that when I upload my Python package to PyPI, and then install it from there using pip, my app breaks because it installs my files into completely different locations than when I simply install the exact same package from a local sdist. Installing from the local sdist puts files on my system like this: /Python27/ Lib/ site-packages/ gloopy-0.1.alpha-py2.7.egg/ (egg and install info files) data/ (images and shader source) doc/ (html) examples/ (.py scripts that use the library) gloopy/ (source) This is much as I'd expect, and works fine (e.g. my source can find my data dir, because they lie next to each other, just like they do in development.) If I upload the same sdist to PyPI and then install it from there, using pip, then things look very different: /Python27/ data/ (images and shader source) doc/ (html) Lib/ site-packages/ gloopy-0.1.alpha-py2.7.egg/ (egg and install info files) gloopy/ (source files) examples/ (.py scripts that use the library) This doesn't work at all - my app can't find its data files, plus obviously it's a mess, polluting the top-level /python27 directory with all my junk. What am I doing wrong? How do I make the pip install behave like the local sdist install? Is that even what I should be trying to achieve? Details I have setuptools installed, and also distribute, and I'm calling distribute_setup.use_setuptools() WindowsXP, Python2.7. My development directory looks like this: /gloopy /data (image files and GLSL shader souce read at runtime) /doc (html files) /examples (some scripts to show off the library) /gloopy (the library itself) My MANIFEST.in mentions all the files I want to be included in the sdist, including everything in the data, examples and doc directories: recursive-include data *.* recursive-include examples *.py recursive-include doc/html *.html *.css *.js *.png include LICENSE.txt include TODO.txt My setup.py is quite verbose, but I guess the best thing is to include it here, right? I also includes duplicate references to the same data / doc / examples directories as are mentioned in the MANIFEST.in, because I understand this is required in order for these files to be copied from the sdist to the system during install. NAME = 'gloopy' VERSION= __import__(NAME).VERSION RELEASE = __import__(NAME).RELEASE SCRIPT = None CONSOLE = False def main(): import sys from pprint import pprint from setup_utils import distribute_setup from setup_utils.sdist_setup import get_sdist_config distribute_setup.use_setuptools() from setuptools import setup description, long_description = read_description() config = dict( name=name, version=version, description=description, long_description=long_description, keywords='', packages=find_packages(), data_files=[ ('examples', glob('examples/*.py')), ('data/shaders', glob('data/shaders/*.*')), ('doc', glob('doc/html/*.*')), ('doc/_images', glob('doc/html/_images/*.*')), ('doc/_modules', glob('doc/html/_modules/*.*')), ('doc/_modules/gloopy', glob('doc/html/_modules/gloopy/*.*')), ('doc/_modules/gloopy/geom', glob('doc/html/_modules/gloopy/geom/*.*')), ('doc/_modules/gloopy/move', glob('doc/html/_modules/gloopy/move/*.*')), ('doc/_modules/gloopy/shapes', glob('doc/html/_modules/gloopy/shapes/*.*')), ('doc/_modules/gloopy/util', glob('doc/html/_modules/gloopy/util/*.*')), ('doc/_modules/gloopy/view', glob('doc/html/_modules/gloopy/view/*.*')), ('doc/_static', glob('doc/html/_static/*.*')), ('doc/_api', glob('doc/html/_api/*.*')), ], classifiers=[ 'Development Status :: 1 - Planning', 'Intended Audience :: Developers', 'License :: OSI Approved :: BSD License', 'Operating System :: Microsoft :: Windows', 'Programming Language :: Python :: 2.7', ], # see classifiers http://pypi.python.org/pypi?:action=list_classifiers ) config.update(dict( author='Jonathan Hartley', author_email='[email protected]', url='http://bitbucket.org/tartley/gloopy', license='New BSD', ) ) if '--verbose' in sys.argv: pprint(config) setup(**config) if __name__ == '__main__': main()

    Read the article

  • Clojure Box: Problem with classpath (noob question)

    - by Rainer
    Hello, I'm stuck with "Programming Clojure" on page 37 on a Windows 7 machine. After downloading the "examples" dir into "C:/clojure", I typed: user (require 'examples.introduction) and I got ; Evaluation aborted. java.io.FileNotFoundException: Could not locate examples/ introduction__init.class or examples/introduction.clj on classpath: (NO_SOURCE_FILE:0) My .emacs file looks like this: (setq swank-clojure-extra-classpaths (list "C:/Clojure")) The files in C:/Clojure are there (I triplechecked) Any help will be appreciated.

    Read the article

  • UML diagram for application architecture?

    - by fayer
    i'm trying to map my whole application in a UML diagram and i wonder what diagram type i should use. im not doing this in class level, rather from a bird eye's perspective. single application object (patterns: singleton)(examples: CodeIgniter application) that composes multiple module objects (patterns: singleton, facades)(examples: guestbook, addressbook) that compose multiple low level stand alone objects (examples: mysql mapper, doctrine mapper) that compose various 3rd and in-house libraries (examples: doctrine, solr, xml-parser) what UML diagram is suited for this kind of overview presentation? thanks

    Read the article

  • Exchange 2007 Email Error 451 4.7.0 Timeout waiting for client input

    - by HK1
    Our SBS 2008 server with Exchange 2007 started rejecting some (most) emails starting about 3 or 4 days ago. The return failure message looks something like this: The error that the other server returned was: 451 451 4.7.0 Timeout waiting for client input (state 18) I've rebooted our Sonicwall TZ-210 router and that doesn't make any difference. I think this problem has something to do with MTU (packet size) but I don't understand why the problem just started now. We haven't made any changes to our network infrastructure for weeks. If I ping our SonicWall (DSL connection, bridge mode) forcing unfragmented packets, I start getting packet dropouts at packet size 1320 or so. Maybe this is completely normal, I'm not sure. I haven't tried rebooting the DSL modem yet because I'm not on site. That's one of the next things I'll try.

    Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >