Search Results

Search found 3341 results on 134 pages for 'prompt'.

Page 31/134 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

• UEFI/GPT Win 7 Load Failure in Dual Boot and no GRUB2 [Ubuntu 12.04]

  - by cristian_jordache

  Configuration: MBB: ASRock X79 Extreme6 Win 7 installed on a INTEL 40GB SSD (GPT partitioned) Ubuntu 14.04 on a CORSAIR 30GB SSD (Ext4 and SWAP) I had Windows 7 installed previously in UEFI mode, using 3 partitions (GPT) and works fine if left alone. In UEFI BIOS settings I can see sometimes a "Windows Boot Manager" and other times (?) a "UEFI Intel" entry for INTEL HDD and Windows will boot properly selecting the one available at that time. I installed Ubuntu 14.04 after Win 7 w/o changing any UEFI BIOS settings and it works fine only if the BIOS is set w/ the Ubuntu partition as the first drive to boot, in AHCI mode. If both SSD drives are connected, the Win7 Intel boot drive can be chosen as first boot device but only as an "AHCI Intel drive" (No "Windows Boot Manager" nor "UEFI Intel device" options available in BIOS Boot menu) and Win7 will not load properly as long as the Ubuntu Crucial SSD is NOT PHYSICALLY DISCONNECTED. Windows will try, start booting for few seconds but will fail replacing Win7 logo and that startup animation with w/ the "old" white progress bar and then and will notify that there is a issue and prompt the user to try to Load Win 7 in Normal Mode again or try a Recovery Mode to fix it. If I let Windows INTEL HDD boot via BIOS/UEFI - Windows Boot manager selection, I may see the purple screen of Grub2 loaded for a while, but there's no selection for Ubuntu or Windows and/or then machine is not booting, showing a black screen and a small command prompt cursor blinking on top. So far the only option I see to have Ubuntu boot side by side w/ Win 7 is to reformat the Win7 SDD and set it boot in legacy BIOS mode with a MBR instead of GPT. Per my understanding this is a quite complex issue to fix (Rod Smith's answer was pretty helpful: UEFI boot on my Asus k52f) but any other suggestions are welcome. I find a bit odd that I can boot properly Windows7 SSD or an Ubuntu DVD using a DVD drive set in UEFI-BIOS in "AHCI mode" and w/ using "UEFI/Windows Boot Manager" booting option but I cannot boot a secondary SSD-HDD w/ Ubuntu having the same BIOS/UEFI Boot configuration. Looks like plugging the second SSD [the Ubuntu partition] is interfering with boot options in UEFI-BIOS.

  Read the article

• Want to Run OS Commands From WLST?

  - by Bala Kothandaraman

  If you spend a lot of time with WLST in the interactive mode, I am sure you have opened another command prompt/shell to check something at the OS file system level. If you wonder whether can execute an OS command from within WLST prompt, the answer is "Yes". This is very convenient similar to how you can execute OS commands from within "Vi" editor. In fact this feature is not from WLST but from underlying Jython. There is "os" module in Jython that provides a unified interface to a number of operating system functions. There is "system" function in the "os" module that can take a OS command as a string input and returns either "0" or "1" depends on whether the command was successful or failed. So this feature can also be used with scripting mode where the return code can be verified for further processing in the script. For eg. os.system(r'dir c:\bea') can list the contents of the bea folder under c drive. Notice the use of the preceding 'r' for escaping the entire string.

  Read the article

• SQL SERVER – Weekly Series – Memory Lane – #049

  - by Pinal Dave

  Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Two Connections Related Global Variables Explained – @@CONNECTIONS and @@MAX_CONNECTIONS @@CONNECTIONS Returns the number of attempted connections, either successful or unsuccessful since SQL Server was last started. @@MAX_CONNECTIONS Returns the maximum number of simultaneous user connections allowed on an instance of SQL Server. The number returned is not necessarily the number currently configured. Query Editor – Microsoft SQL Server Management Studio This post may be very simple for most of the users of SQL Server 2005. Earlier this year, I have received one question many times – Where is Query Analyzer in SQL Server 2005? I wrote small post about it and pointed many users to that post – SQL SERVER – 2005 Query Analyzer – Microsoft SQL SERVER Management Studio. Recently I have been receiving similar question. OUTPUT Clause Example and Explanation with INSERT, UPDATE, DELETE SQL Server 2005 has a new OUTPUT clause, which is quite useful. OUTPUT clause has access to insert and deleted tables (virtual tables) just like triggers. OUTPUT clause can be used to return values to client clause. OUTPUT clause can be used with INSERT, UPDATE, or DELETE to identify the actual rows affected by these statements. OUTPUT clause can generate a table variable, a permanent table, or temporary table. Even though, @@Identity will still work with SQL Server 2005, however I find the OUTPUT clause very easy and powerful to use. Let us understand the OUTPUT clause using an example. Find Name of The SQL Server Instance Based on database server stored procedures has to run different logic. We came up with two different solutions. 1) When database schema is very much changed, we wrote completely new stored procedure and deprecated older version once it was not needed. 2) When logic depended on Server Name we used global variable @@SERVERNAME. It was very convenient while writing migrating script which depended on the server name for the same database. Explanation of TRY…CATCH and ERROR Handling With RAISEERROR Function One of the developers at my company thought that we can not use the RAISEERROR function in new feature of SQL Server 2005 TRY… CATCH. When asked for an explanation he suggested SQL SERVER – 2005 Explanation of TRY… CATCH and ERROR Handling article as excuse suggesting that I did not give example of RAISEERROR with TRY…CATCH. We all thought it was funny. Just to keep records straight, TRY… CATCH can sure use RAISEERROR function. Different Types of Cache Objects Serveral kinds of objects can be stored in the procedure cache: Compiled Plans: When the query optimizer finishes compiling a query plan, the principal output is compiled plan. Execution contexts: While executing a compiled plan, SQL Server has to keep track of information about the state of execution. Cursors: Cursors track the execution state of server-side cursors, including the cursor’s current location within a resultset. Algebrizer trees: The Algebrizer’s job is to produce an algebrizer tree, which represents the logic structure of a query. Open SSMS From Command Prompt – sqlwb.exe Example This article is written by request and suggestion of Sr. Web Developer at my organization. Due to the nature of this article most of the content is referred from Book On-Line. sqlwbcommand prompt utility which opens SQL Server Management Studio. Squib command does not run queries from the command prompt. sqlcmd utility runs queries from command prompt, read for more information. 2008 Puzzle – Solution – Computed Columns Datatype Explanation Just a day before I wrote article SQL SERVER – Puzzle – Computed Columns Datatype Explanation which was inspired by SQL Server MVP Jacob Sebastian. I suggest that before continuing this article read the original puzzle question SQL SERVER – Puzzle – Computed Columns Datatype Explanation.The question was if the computed column was of datatype TINYINT how to create a Computed Column of datatype INT? 2008 – Find If Index is Being Used in Database It is very often I get a query that how to find if any index is being used in the database or not. If any database has many indexes and not all indexes are used it can adversely affect performance. If the number of indices are higher it reduces the INSERT / UPDATE / DELETE operation but increase the SELECT operation. It is recommended to drop any unused indexes from table to improve the performance. 2009 Interesting Observation – Execution Plan and Results of Aggregate Concatenation Queries If you want to see what’s going on here, I think you need to shift your point of view from an implementation-centric view to an ANSI point of view. ANSI does not guarantee processing the order. Figure 2 is interesting, but it will be potentially misleading if you don’t understand the ANSI rule-set SQL Server operates under in most cases. Implementation thinking can certainly be useful at times when you really need that multi-million row query to finish before the backup fire off, but in this case, it’s counterproductive to understanding what is going on. SQL Server Management Studio and Client Statistics Client Statistics are very important. Many a times, people relate queries execution plan to query cost. This is not a good comparison. Both parameters are different, and they are not always related. It is possible that the query cost of any statement is less, but the amount of the data returned is considerably larger, which is causing any query to run slow. How do we know if any query is retrieving a large amount data or very little data? 2010 I encourage all of you to go through complete series and write your own on the subject. If you write an article and send it to me, I will publish it on this blog with due credit to you. If you write on your own blog, I will update this blog post pointing to your blog post. SQL SERVER – ORDER BY Does Not Work – Limitation of the View 1 SQL SERVER – Adding Column is Expensive by Joining Table Outside View – Limitation of the View 2 SQL SERVER – Index Created on View not Used Often – Limitation of the View 3 SQL SERVER – SELECT * and Adding Column Issue in View – Limitation of the View 4 SQL SERVER – COUNT(*) Not Allowed but COUNT_BIG(*) Allowed – Limitation of the View 5 SQL SERVER – UNION Not Allowed but OR Allowed in Index View – Limitation of the View 6 SQL SERVER – Cross Database Queries Not Allowed in Indexed View – Limitation of the View 7 SQL SERVER – Outer Join Not Allowed in Indexed Views – Limitation of the View 8 SQL SERVER – SELF JOIN Not Allowed in Indexed View – Limitation of the View 9 SQL SERVER – Keywords View Definition Must Not Contain for Indexed View – Limitation of the View 10 SQL SERVER – View Over the View Not Possible with Index View – Limitations of the View 11 SQL SERVER – Get Query Running in Session I was recently looking for syntax where I needed a query running in any particular session. I always remembered the syntax and ha d actually written it down before, but somehow it was not coming to mind quickly this time. I searched online and I ended up on my own article written last year SQL SERVER – Get Last Running Query Based on SPID. I felt that I am getting old because I forgot this really simple syntax. Find Total Number of Transaction on Interval In one of my recent Performance Tuning assignments I was asked how do someone know how many transactions are happening on a server during certain interval. I had a handy script for the same. Following script displays transactions happened on the server at the interval of one minute. You can change the WAITFOR DELAY to any other interval and it should work. 2011 Here are two DMV’s which are newly introduced in SQL Server 2012 and provides vital information about SQL Server. DMV – sys.dm_os_volume_stats – Information about operating system volume DMV – sys.dm_os_windows_info – Information about Operating System SQL Backup and FTP – A Quick and Handy Tool I have used this tool extensively since 2009 at numerous occasion and found it to be very impressive. What separates it from the crowd the most – it is it’s apparent simplicity and speed. When I install SQLBackupAndFTP and configure backups – all in 1 or 2 minutes, my clients are always impressed. Quick Note about JOIN – Common Questions and Simple Answers In this blog post we are going to talk about join and lots of things related to the JOIN. I recently started office hours to answer questions and issues of the community. I receive so many questions that are related to JOIN. I will share a few of the same over here. Most of them are basic, but note that the basics are of great importance. 2012 Importance of User Without Login Question: “In recent version of SQL Server we can create user without login. What is the use of it?” Great question indeed. Let me first attempt to answer this question but after reading my answer I need your help. I want you to help him as well with adding more value to it. Preserve Leading Zero While Coping to Excel from SSMS Earlier I wrote two articles about how to efficiently copy data from SSMS to Excel. Since I wrote that post there are plenty of interest generated on this subject. There are a few questions I keep on getting over this subject. One of the question is how to get the leading zero preserved while copying the data from SSMS to Excel. Well it is almost the same way as my earlier post SQL SERVER – Excel Losing Decimal Values When Value Pasted from SSMS ResultSet. The key here is in EXCEL and not in SQL Server. Solution – 2 T-SQL Puzzles – Display Star and Shortest Code to Display 1 Earlier on this blog we had asked two puzzles. The response from all of you is nothing but Amazing. I have received 350+ responses. Many are valid and many were indeed something I had not thought about it. I strongly suggest you read all the puzzles and their answers here - trust me if you start reading the comments you will not stop till you read every single comment. Seriously trust me on it. Personally I have learned a lot from it. Identify Most Resource Intensive Queries – SQL in Sixty Seconds #028 – Video http://www.youtube.com/watch?v=TvlYy-TGaaA Importance of User Without Login – T-SQL Demo Script Earlier I wrote a blog post about SQL SERVER – Importance of User Without Login and my friend and SQL Expert Vinod Kumar has written excellent follow up blog post about Contained Databases inside SQL Server 2012. Now lots of people asked me if I can also explain the same concept again so here is the small demonstration for it. Let me show you how login without user can help. Before we continue on this subject I strongly recommend that you read my earlier blog post here. In following demo I am going to demonstrate following situation. Login using the System Admin account Create a user without login Checking Access Impersonate the user without login Checking Access Revert Impersonation Give Permission to user without login Impersonate the user without login Checking Access Revert Impersonation Clean up Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Persistence problem when installing USB Ubuntu variant using Windows

  - by Derek Redfern

  I'm part of a project called One2One2Go - we're developing a Live USB Ubuntu variant for use in schools in Somerville, MA. We have the project files compiled into an iso, and when installed using the native Ubuntu Startup Disk Creator, the USB works fine. When installed using a tool on a Windows machine (LiLi at linuxliveusb.com or liveusb-creator at fedorahosted.org/liveusb-creator), the USB works, but does not have persistence. This happens even if the creator is specifically set to allocate an area for persistent files. When comparing files on sticks created in Windows or Ubuntu, the one file that is different is syslinux/syslinux.cfg. I have printed the contents of the file below: Installed on Windows: DEFAULT nomodset LABEL debug menu label ^debug kernel /casper/vmlinuz append boot=casper xforcevesa initrd=/casper/initrd.gz -- LABEL nomodset menu label ^nomodset kernel /casper/vmlinuz append boot=casper quiet splash nomodset initrd=/casper/initrd.gz -- LABEL memtest menu label ^Memory test kernel /install/memtest append - LABEL hd menu label ^Boot from first hard disk localboot 0x80 append - PROMPT 0 TIMEOUT 1 Installed on Ubuntu: DEFAULT nomodset LABEL debug menu label ^debug kernel /casper/vmlinuz append noprompt cdrom-detect/try-usb=true persistent boot=casper xforcevesa initrd=/casper/initrd.gz -- LABEL nomodset menu label ^nomodset kernel /casper/vmlinuz append noprompt cdrom-detect/try-usb=true persistent boot=casper quiet splash nomodset initrd=/casper/initrd.gz -- LABEL memtest menu label ^Memory test kernel /install/memtest append - LABEL hd menu label ^Boot from first hard disk localboot 0x80 append - PROMPT 0 TIMEOUT 1 For troubleshooting reasons, I changed the Windows-created syslinux.cfg to match the one created by Ubuntu and persistence worked on it. I think the problem is that on the stick created by Windows, there is no "persistent" flag, but I don't know why. Is this a problem with our disk image or with the creator? How would I go about fixing this problem? Thanks in advance for your help. Derek Redfern

  Read the article

• xcopy file, suppress &ldquo;Does xxx specify a file name&hellip;&rdquo; message

  - by MarkPearl

  Today we had an interesting problem with file copying. We wanted to use xcopy to copy a file from one location to another and rename the copied file but do this impersonating another user. Getting the impersonation to work was fairly simple, however we then had the challenge of getting xcopy to work. The problem was that xcopy kept prompting us with a prompt similar to the following… Does file.xxx specify a file name or directory name on the target (F = file, D = directory)? At which point we needed to press ‘Y’. This seems to be a fairly common challenge with xcopy, as illustrated by the following stack overflow link… One of the solutions was to do the following… echo f | xcopy /f /y srcfile destfile This is fine if you are running from the command prompt, but if you are triggering this from c# how could we daisy chain a bunch of commands…. The solution was fairly simple, we eventually ended up with the following method… public void Copy(string initialFile, string targetFile) { string xcopyExe = @"C:\windows\system32\xcopy.exe"; string cmdExe = @"C:\windows\system32\cmd.exe"; ProcessStartInfo p = new ProcessStartInfo(); p.FileName = cmdExe; p.Arguments = string.Format(@"/c echo f | {2} {0} {1} /Y", initialFile, targetFile, xcopyExe); Process.Start(p); } Where we wrapped the commands we wanted to chain as arguments and instead of calling xcopy directly, we called cmd.exe passing xcopy as an argument.

  Read the article

• Out of space despite lots of free space remaining

  - by Kristian Thomsen

  When upgrading Ubuntu from 11.10 to 12.04 I discovered an unexpected problem. The upgrade was stopped because there wasn't enough free space for the installation. I managed to free some space and do the upgrade but now a prompt appears after logging in saying I'm out of space. This prompt asks me if I want to examine the problem. The "Disk Usage Analyser" is opened. In the top it says: Total filesystem capacity: 47.0 GB (used: 13.5 GB available: 33.4 GB) Folder -- Usage -- Size / -- 100% -- 12.5 GB usr -- 44.8 % -- 5.6 GB home -- 30.3 % -- 3.8 GB lib -- 13.0 % -- 1.6 GB var -- 9.1 % -- 1.1 GB boot 2.5 % 309.5 GB and a lot of small contributors like: etc, opt, sbin, bin etc. I do not really understand this problem since the analyser in the top says that I have 33.4 GB left in this file system. What can I do to make Ubuntu use the remaining space? Running df -i in the terminal gives: Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda7 610800 576874 33926 95% / udev 213451 563 212888 1% /dev tmpfs 218524 486 218038 1% /run none 218524 3 218521 1% /run/lock none 218524 7 218517 1% /run/shm /dev/sda8 2264752 16371 2248381 1% /home What does this mean?

  Read the article

• Screen lock broken when using separate x screens

  - by Wolf

  For some reason, the screen lock appears to be broken when I use separate x screens (it works fine if I use twin view or just one monitor, though). If I wait for the screen to lock (or if I tell it to lock), it fades to black, showing only the mouse cursor. However, when I move the mouse to bring up the password prompt, nothing happens, the screens remain completely blank. Furthermore, it would appear that the screen lock never activated in the first place, for two reasons: one, if I blindly enter my password and press enter, nothing happens; and two, if I press ctrl+alt+delete and then enter it logs me out (which shouldn't happen if the password prompt is there, right), losing any progress I have on any of the open programs (meaning, not a very friendly option for a programmer ;) ). So yeah, does anyone know why this is happening, and how to fix it? Thanks! Notes: I am using Ubuntu 11.10 64 bit. I am using gnome-classic, but the same problem occurs when I use unity. I do not have xscreensaver, nor do I have any screen savers running (except, I guess for the default blank one).

  Read the article

• How to get OpenSSH to use ksshaskpass under KDE?

  - by Guss

  When using a GNOME desktop on Ubuntu, if I use OpenSSH client to connect to another computer (running from the gnome-terminal), I get a single graphic popup asking for my private key's pass-phrase. After that I no longer need to enter my pass-phrase as it is cached by the SSH agent. Under KDE it doesn't work like that - when I start ssh from konsole, I get a text prompt for my pass-phrase every single time, even though ssh-agent is running. If I run ssh-add from the terminal then I can enter my pass-phrase on the terminal and it will be stored by ssh-agent and I won't get any more pass-phrase prompts, while if I run ssh-add the KRunner graphical command line ("Run" dialog) then I get a graphical prompt with the same behavior. The problem is I have to remember running ssh-add every time I log in to the desktop. How can I get ssh to behave under KDE, the same as it does on GNOME - the first time the pass-phrase is needed, pop up a graphical dialog and store the pass-phrase in the agent. I've installed ksshaskpass, but that didn't change anything.

  Read the article

• Trying to install flash player on ubuntu 12.04

  - by Eric

  I am having trouble installing this program. I do not know how to locate the browser plugins directory, or change the directory in the terminal. Installation instructions Installing using the plugin tar.gz: Unpack the plugin tar.gz and copy the files to the appropriate location. Save the plugin tar.gz locally and note the location the file was saved to. Launch terminal and change directories to the location the file was saved to. Unpack the tar.gz file. Once unpacked you will see the following: + libflashplayer.so + /usr Identify the location of the browser plugins directory, based on your Linux distribution and Firefox version Copy libflashplayer.so to the appropriate browser plugins directory. At the prompt type: cp libflashlayer.so <BrowserPluginsLocation> Copy the Flash Player Local Settings configurations files to the /usr directory. At the prompt type: sudo cp -r usr/* /usr Installing the plugin using RPM: - As root, enter in terminal: rpm -Uvh <rpm_package_file> - Click Enter key and follow prompts Installing the standalone player Unpack the tar.gz file To execute the standalone player Double-click, or enter in terminal: ./flashplayer

  Read the article

• [SOLVED]Another version of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel

  - by kazim sardar mehdi

  Another version of this product is already installed.  Installation of this version cannot continue.  To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel I tried to install a new version of windows services that packed into 1 setup.msi and encounter the above mentioned error. To resolve it I tried google read lots of but then find the following article MSIEXEC - The power user's install steps to solve the error: 1. Execute the following command from command prompt: msiexec /i program_name.msi /lv logfile.log where program_name.msi is the new version /lv is log Verbose output   2. open up the logfile.log in the editor 3. find the GUID in it I found it like the following Product Code from property table before transforms: '{GUID}' 4. Above mentioned article suggest  to search it in the registry but to find the uninstall command. Try if you like to see it in the registry. you need to search twice to to get there there you I tried the following command as it mentioned in the above mentioned article but it didn’t work for me. so I keep digging until I got Windows 7 and Windows Installer Error “Another installation is in progress” It mentioned the use of msizap.exe 5.   by combining the commands from both the articles I able to uninstall the service successfully execute the following command from the visual studio command prompt if you already have installed or get it from Microsoft website http://msdn.microsoft.com/en-us/library/aa370523%28VS.85%29.aspx   msizap.exe TWP {GUID} it did the trick and removed the installed service successfully

  Read the article

• How do I boot into console mode (redux)

  - by Leo Simon

  I'm running Ubuntu 12.04. This question was asked some time ago How do I disable the boot splash screen? but the answers didn't work for me. The standard way to boot into console mode used to be to edit /etc/default/grub and set GRUB_CMDLINE_LINUX_DEFAULT="text" This worked fine until I ran the fix proposed in https://help.ubuntu.com/community/SoundTroubleshootingProcedure in order to get sound to work. Since then, I have disabled the boot-splash-screen, but I can avoid what I presume is the lightdm login prompt screen. All I want to do is disable this gui and be prompted with a console login prompt. (Shouldnt be so hard should it???) I read in three 33416 mentioned above that there was a bug in lightdm (it wasn't recognizing "text" properly as an option for GRUB_CMDLINE_LINUX_DEFAULT.) But this discussion happened more than a year ago, and it's surely been fixed. Yet my lightdm is uptodate (so I'm told when I try to update it with apt-get). As suggested in one of the above, I tried sudo update-rc.d -f lightdm remove which resulted in a hung machine. I managed to recover using recovery mode, but now I still get the gui again. Another suggestion is to edit /etc/init/lightdm.override. I've done this and set it to "manual" as suggested, but lightdm simply ignores this. Could somebody suggest how to proceed please? Thanks very much, Leo

  Read the article

• Why does 12.04 upgrade abort with out of space error when I have lots of it?

  - by Kristian Thomsen

  When upgrading Ubuntu from 11.10 to 12.04 I discovered an unexpected problem. The upgrade was stopped because there wasn't enough free space for the installation. I managed to free some space and do the upgrade but now a prompt appears after logging in saying I'm out of space. This prompt asks me if I want to examine the problem. The "Disk Usage Analyser" is opened. In the top it says: Total filesystem capacity: 47.0 GB (used: 13.5 GB available: 33.4 GB) Folder -- Usage -- Size / -- 100% -- 12.5 GB usr -- 44.8 % -- 5.6 GB home -- 30.3 % -- 3.8 GB lib -- 13.0 % -- 1.6 GB var -- 9.1 % -- 1.1 GB boot 2.5 % 309.5 GB and a lot of small contributors like: etc, opt, sbin, bin etc. I do not really understand this problem since the analyser in the top says that I have 33.4 GB left in this file system. What can I do to make Ubuntu use the remaining space? Running df -i in the terminal gives: Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda7 610800 576874 33926 95% / udev 213451 563 212888 1% /dev tmpfs 218524 486 218038 1% /run none 218524 3 218521 1% /run/lock none 218524 7 218517 1% /run/shm /dev/sda8 2264752 16371 2248381 1% /home The output of df -h Filesystem Size Used Avail Use% Mounted on /dev/sda7 9,3G 7,8G 1,1G 88% / udev 993M 4,0K 993M 1% /dev tmpfs 401M 884K 400M 1% /run none 5,0M 0 5,0M 0% /run/lock none 1003M 152K 1002M 1% /run/shm /dev/sda8 35G 4,0G 29G 13% /home /dev/sda2 101G 64G 37G 64% /media/A2C8E28BC8E25CD3 Running sudo fdisk -l gives Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000080 Device Boot Start End Blocks Id System /dev/sda1 63 96389 48163+ de Dell Utility /dev/sda2 * 98304 210434488 105168092+ 7 HPFS/NTFS/exFAT /dev/sda3 210436094 312576704 51070305+ f W95 Ext'd (LBA) /dev/sda5 306279288 312576704 3148708+ dd Unknown /dev/sda6 210436096 214341631 1952768 82 Linux swap / Solaris /dev/sda7 214343680 233873407 9764864 83 Linux /dev/sda8 233875456 306278399 36201472 83 Linux Partition table entries are not in disk order

  Read the article

• Cannot restart Ubuntu after replacing Unity with Gnome and purging lightdm

  - by OtagoHarbour

  I am running Ubuntu 11.10. I used the directions here to replace Unity with Gnome. It seemed to work fine until the end of step 2 when I rebooted the computer. When I chose the default option, I just got a black screen. When I choose the restore option and then "Restore normal boot" I get Starting load fallback graphics devices [fail] Starting GNOME Display Manager [ok] Starting Userspace bootsplash [ok] Stopping GNOME Display Manager [ok] Stopping Userspace bootsplash [ok] Starting web server apach22 [fail] (among a lot of OKs) It finally gets to Stopping System V runlevel compatibility [ok] where it hangs. I left it overnight and just had a blank screen when I checked it in the morning. I can "Drop to root shell prompt" and "Drop to root shell prompt with networking". I did see here that one should be able to fix the problem by choosing remount and then doing apt-get install lightdm I tried this as root shell with and without networking and got the message Err http://us.archive.ubuntu.com/ubuntu/ oneric-updates/main lightdm i386 1.0.6-0ubuntu1.7 Could not resolve 'us.archive.ubuntu.com/ubuntu' What is the best way to resolve this problem? Thanks, Peter.

  Read the article

• No Visual studio template information found. See application log in Event viewer for more details

  - by sathya

  I tried installing the .NET Framework 4.0 and ASP.NET MVC 2 Framework through the web platform installer. It took a long time and finally i had a restart in between for .NET 4 installation and after that due to my system hang problems had to do a couple of restarts. And after that tried installing the ASP.NET MVC 2 alone and it succeeded. (During this time i had all my VS instances closed).  I am having VS 2008 SP1. And finally after opening VS 2008 and clicking on new project it said the above error no template info found. and i dint have even a single template in the new project template selection window. So these are the steps that i did for recovering the same.  Start Menu --> Microsoft Visual Studio 2008 --> Visual Studio Tools. Right-click over the Visual Studio Command Prompt shortcut and make sure you select Run as Administrator. Once the VS Command Prompt comes up, execute the command 1. "devenv /installvstemplates" 2. "devenv /resetsettings"  And that worked out. No Visual studio template information found. See application log in Event viewer for more detail

  Read the article

• Ways to dynamically render a real world 3d environment in Unity3D

  - by Jake M

  Using Unity3D and C# I am attempting to display a 3d version of a real world location. Inside my Unity3D app, the user will specify the GPS coordinates of a location, then my app will have to generate a 3d plane(anything doesn't have to be a plane) of that location. The plane will show a 500 metre by 500 metre 3d snapshot of that location. How would you suggest I achieve this in Unity3D? What methodology would you use to achieve this? NOTE: I understand that this is a very difficult endevour(to render real world locations dynamically in Unity3d) so I expect to perform many actions to achieve this. I just don't know of all the technologies out there and which would be best for my needs For example: Suggested methodology 1: Prompt user to specify GPS coords Use Google earth API and HTTP to programmatically obtain a .khm file describing that location(Not sure if google earth provides that capability does it?) Unzip the .khm so I have the .dae file Convert that file to a .3ds file using ??? third party converter(is there a converter that exists?) Import .3ds into Unity3D at runtime as a plane(is this possible)? Suggested methodology 2: Prompt user to specify GPS coords Use Google earth API and HTTP to programmatically obtain a .khm file describing that location(Not sure if google earth provides that capability does it?) Unzip the .khm so I have the .dae file Parse .dae file using my own C# parser I will write(do you think its possible to write a .dae parser that can parse the .dae into an array of Vector3 that describe the height map of that location?) Dynamically create a plane in Unity3D and populate it with my array/list of Vector3 points(is it possible to create a plane this way?) Maybe I am meant to create a mesh instead of a plane? Can you think of any other ways I could render a real world 3d environment in Unity3D?

  Read the article

• sqlplus: Running "set lines" and "set pagesize" automatially

  - by katsumii

  This is a followup to my previous entry. Using the full tty real estate with sqlplus (INOUE Katsumi @ Tokyo) 'rlwrap' is widely used for adding 'sqlplus' the history function and command line editing. Here's another but again kludgy implementation. First this is the alias. alias sqlplus="rlwrap -z ~/sqlplus.filter sqlplus" And this is the file content. #!/usr/bin/env perl use lib ($ENV{RLWRAP_FILTERDIR} or "."); use RlwrapFilter; use POSIX qw(:signal_h); use strict; my $filter = new RlwrapFilter; $filter -> prompt_handler(\&prompt); sigprocmask(SIG_UNBLOCK, POSIX::SigSet->new(28)); $SIG{WINCH} = 'winchHandler'; $filter -> run; sub winchHandler { $filter -> input_handler(\&input); sigprocmask(SIG_UNBLOCK, POSIX::SigSet->new(28)); $SIG{WINCH} = 'winchHandler'; $filter -> run; } sub input { $filter -> input_handler(undef); return `resize |sed -n "1s/COLUMNS=/set linesize /p;2s/LINES=/set pagesize /p"` . $_; } sub prompt { if ($_ =~ "SQL> ") { $filter -> input_handler(\&input); $filter -> prompt_handler(undef); } return $_; } I hope I can compare these 2 implementations after testing more and getting some feedbacks.

  Read the article

• PyGTK/Quickly Add string to ListStore

  - by AllRadioisDead

  I'm trying to build an application that will prompt the user for a string, and then add that string to a Scrolling Listview object using quickly and PyGTK. I've been following this tutorial: http://developer.ubuntu.com/resources/app-developer-cookbook/multimedia/creating-a-simple-media-player/ When I hit the add button, the prompt comes up properly and I'm able to enter the string. The column appears correctly but the list ends up being blank. What am I doing wrong? import gettext from gettext import gettext as _ gettext.textdomain('spiderweb') from gi.repository import Gtk # pylint: disable=E0611 import logging logger = logging.getLogger('spiderweb') from spiderweb_lib import Window from spiderweb.AboutSpiderwebDialog import AboutSpiderwebDialog from spiderweb.PreferencesSpiderwebDialog import PreferencesSpiderwebDialog from quickly import prompts from quickly.widgets.dictionary_grid import DictionaryGrid import os # See spiderweb_lib.Window.py for more details about how this class works class SpiderwebWindow(Window): __gtype_name__ = "SpiderwebWindow" def finish_initializing(self, builder): # pylint: disable=E1002 """Set up the main window""" super(SpiderwebWindow, self).finish_initializing(builder) self.AboutDialog = AboutSpiderwebDialog self.PreferencesDialog = PreferencesSpiderwebDialog # Code for other initialization actions should be added here. self.supported_web_formats = [".net",".html", ".com"] def on_addbutton_clicked(self, widget, data=None): #let the user choose a path with the directory chooser response, string = prompts.string("Enter a string", "Please enter string:", "Sample Text") #make certain the user said ok before working if response == Gtk.ResponseType.OK: #make a list of the supported media files media_files = Gtk.ListStore(str) #add a dictionary to the list of media files media_files.append({"String":string}) #remove any children in scrolled window for c in self.ui.scrolledwindow1.get_children(): self.ui.scrolledwindow1.remove(c) #create the grid with list of dictionaries #only show the File column media_grid = DictionaryGrid(media_files, keys=["File"]) #show the grid, and add it to the scrolled window media_grid.show_all() self.ui.scrolledwindow1.add(media_grid)

  Read the article

• The better way to ask for input?

  - by Skippy

  I am wondering which is the best way to go with java code. I need to create a class with simple prompts for input.. I have tried using both classes and cannot work out the particular benefits for each. Is this because I am still in the early stages of programming or are there situations that will occur as it becomes more complex?? import java.util.Scanner; public class myClass { Scanner stdin = new Scanner(System.in); public String getInput(String prompt) { System.out.print(prompt); return stdin.nextLine(); } ... or import java.io.*; public class myClass { public static void main(String[] args) throws IOException { BufferedReader stdin = new BufferedReader (new InputStreamReader (System.in)); System.out.print("Input something: "); String name = stdin.readLine(); I know these examples are showing different methods within these classes, but thought this might serve well for the discussion. I'm really not sure which site is the best to ask this on.

  Read the article

• Cannot find GRUB - Ubuntu/Windows 8 dual-boot

  - by ubeatlenine

  Hello Ubuntu community, I find myself in an interesting situation. I have a Dell Inspiron 531 with Windows Vista. Recently my brother decided it would be a good idea to overwrite Vista with the Windows 8 consumer preview. Since we have had this PC for a very long time, we have long since lost the Vista CD, and according to the Windows 8 preview website you cannot recover your previous OS without it. I thought this would be a good opportunity to try out Ubuntu (since we obviously cannot keep the preview as an OS), but it appears that Ubuntu 11.10 Desktop is not compatible with Win8. Ubuntu doesn't run from the LiveUSB I made, instead it freezes on the loading screen and then disintegrates into black and white stripes. I blamed this failure on Ubuntu not being compatible with win8 yet and tried to install Ubuntu from the USB on a partition made from the remaining space on my hard drive - about 100GB. However the installer crashed while loading modules and told me I didn't have enough disk space. Since then, I have not been able to load either Ubuntu or Windows, BIOS is shifted over to the left of my screen, and I always get the same message: error: unknown filesystem grub rescue> typing "ls" at the prompt gives me the following: (hd0) (hd0,msdos7) (hd0,msdos6) (hd0,msdos5) (hd0,msdos2) (hd0,msdos1) does this mean I have multiple partitions running windows on my computer? Is it possible to recover Vista without the disk? Are all of my problems stemming from Ubuntu not being compatible with Win8 preview? (I realize the majority of my questions are about Windows, but seeing as the prompt I get is for grub I thought I would ask here first.) Any insight anyone has on this predicament would be greatly appreciated.

  Read the article

• Part 14: Execute a PowerShell script

  In the series the following parts have been published Part 1: Introduction Part 2: Add arguments and variables Part 3: Use more complex arguments Part 4: Create your own activity Part 5: Increase AssemblyVersion Part 6: Use custom type for an argument Part 7: How is the custom assembly found Part 8: Send information to the build log Part 9: Impersonate activities (run under other credentials) Part 10: Include Version Number in the Build Number Part 11: Speed up opening my build process template Part 12: How to debug my custom activities Part 13: Get control over the Build Output Part 14: Execute a PowerShell script Part 15: Fail a build based on the exit code of a console application With PowerShell you can add powerful scripting to your build to for example execute a deployment. If you want more information on PowerShell, please refer to http://technet.microsoft.com/en-us/library/aa973757.aspx For this example we will create a simple PowerShell script that prints “Hello world!”. To create the script, create a new text file and name it “HelloWorld.ps1”. Add to the contents of the script: Write-Host “Hello World!” To test the script do the following: Open the command prompt To run the script you must change the execution policy. To do this execute in the command prompt: powershell set-executionpolicy remotesigned Now go to the directory where you have saved the PowerShell script Execute the following command powershell .\HelloWorld.ps1 In this example I use a relative path, but when the path to the PowerShell script contains spaces, you need to change the syntax to powershell "& '<full path to script>' " for example: powershell "& ‘C:\sources\Build Customization\SolutionToBuild\PowerShell Scripts\HellloWorld.ps1’ " In this blog post, I create a new solution and that solution includes also this PowerShell script. I want to create an argument on the Build Process Template that holds the path to the PowerShell script. In the Build Process Template I will add an InvokeProcess activity to execute the PowerShell command. This InvokeProcess activity needs the location of the script as an argument for the PowerShell command. Since you don’t know the full path at the build server of this script, you can either specify in the argument the relative path of the script, but it is hard to find out what the relative path is. I prefer to specify the location of the script in source control and then convert that server path to a local path. To do this conversion you can use the ConvertWorkspaceItem activity. So to complete the task, open the Build Process Template CustomTemplate.xaml that we created in earlier parts, follow the following steps Add a new argument called “DeploymentScript” and set the appropriate settings in the metadata. See Part 2: Add arguments and variables  for more information. Scroll down beneath the TryCatch activity called “Try Compile, Test, and Associate Changesets and Work Items” Add a new If activity and set the condition to "Not String.IsNullOrEmpty(DeploymentScript)" to ensure it will only run when the argument is passed. Add in the Then branch of the If activity a new Sequence activity and rename it to “Start deployment” Click on the activity and add a new variable called DeploymentScriptFilename (scoped to the “Start deployment” Sequence Add a ConvertWorkspaceItem activity on the “Start deployment” Sequence Add a InvokeProcess activity beneath the ConvertWorkspaceItem activity in the “Start deployment” Sequence Click on the ConvertWorkspaceItem activity and change the properties DisplayName = Convert deployment script filename Input = DeploymentScript Result = DeploymentScriptFilename Workspace = Workspace Click on the InvokeProcess activity and change the properties Arguments = String.Format(" ""& '{0}' "" ", DeploymentScriptFilename) DisplayName = Execute deployment script FileName = "PowerShell" To see results from the powershell command drop a WriteBuildMessage activity on the "Handle Standard Output" and pass the stdOutput variable to the Message property. Do the same for a WriteBuildError activity on the "Handle Error Output" To publish it, check in the Build Process Template This leads to the following result We now go to the build definition that depends on the template and set the path of the deployment script to the server path to the HelloWorld.ps1. (If you want to see the result of the PowerShell script, change the Logging verbosity to Detailed or Diagnostic). Save and run the build. A lot of the deployment scripts you have will have some kind of arguments (like username / password or environment variables) that you want to define in the Build Definition. To make the PowerShell configurable, you can follow the following steps. Create a new script and give it the name "HelloWho.ps1". In the contents of the file add the following lines: param (         $person     ) $message = [System.String]::Format(“Hello {0}!", $person) Write-Host $message When you now run the script on the command prompt, you will see the following So lets change the Build Process Template to accept one parameter for the deployment script. You can of course make it configurable to add a for-loop that reads through a collection of parameters but that is out of scope of this blog post. Add a new Argument called DeploymentScriptParameter In the InvokeProcess activity where the PowerShell command is executed, modify the Arguments property to String.Format(" ""& '{0}' '{1}' "" ", DeploymentScriptFilename, DeploymentScriptParameter) Check in the Build Process Template Now modify the build definition and set the Parameter of the deployment to any value and run the build. You can download the full solution at BuildProcess.zip. It will include the sources of every part and will continue to evolve.

  Read the article

• How to Get All the Windows 8 Editions on One Install Disk

  - by Taylor Gibb

  There are a lot of different versions of Windows, but you probably didn’t know that short of the Enterprise edition, the disc or image that you own contains all versions for that architecture. Read on to see how we can use them to make a universal Windows 8 install disc. Things You Will Need A x86 Version of Windows 8 A x64 Version of Windows 8 A x86 Version of Windows 8 Enterprise A x64 Version of Windows 8 Enterprise A Windows 8 PC Note: While we will use all the images above you don’t really need the Enterprise Edition. You could always leave out parts of the tutorial if you know what you are doing, if you are not comfortable with that and still want to follow through you could always grab the Enterprise evaluation images that are available for free to the public, on MSDN. Getting Started To get started you will need to Download the Windows 8 ADK from Microsoft. Once downloaded go ahead and install it, you will only need the Deployment tools so be sure to uncheck the rest of the options. Lastly you will also need to create the following folder structure on the root of your C:\ drive to make things a bit easier. C:\Windows8Root C:\Windows8Root\x86 C:\Windows8Root\x64 C:\Windows8Root\Enterprisex86 C:\Windows8Root\Enterprisex64 C:\Windows8Root\Temp C:\Windows8Root\Final OK lets get started. Making The Image The first thing we need to do is create a base image, so mount the x86 version of Windows 8 and copy its files to: C:\Windows8Root\Final Now move the install.wim file from: C:\Windows8Root\Final\sources To: C:\Windows8Root\x86 Next go ahead and copy the install.wim file from the other 3 images, Windows 8 x64, Windows 8 Enterprise x86 and Windows 8 Enterprise x64 to the respective folders in Windows8Root, the install.wim file can be located at: D:\sources\install.wim Note: The above assumes that the images are always mounted at drive D. Remember that each install.wim is different so don’t copy them to the wrong directories or the rest of the tutorial wont work. Next switch to the Metro Start Screen and open the Deployment and Imaging Tools Environment. Note: If you are not a local administrator on your PC, you will need to right-click on it and choose to run it as an administrator. Now run the following commands: Dism /Export-Image /SourceImageFile:c:\Windows8Root\x86\install.wim /SourceIndex:2 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8″ /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\x86\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Pro” /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\x86\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Pro with Media Center” /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\Enterprisex86\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Enterprise” /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\x64\install.wim /SourceIndex:2 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8″ /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\x64\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Pro” /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\x64\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Pro with Media Center” /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\Enterprisex64\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Enterprise” /compress:maximum Next navigate to: C:\Windows8Root\sources\ And create a new text file. You will need to call it: EI.cfg Then edit it to look like the following: The last thing we need to do is work some magic to get Windows Media Center added to the WMC editions of Windows 8. For that I have written a little script to make it easier for everybody, you can grab it here. Once you have downloaded it extract it. In order to use it right-click in the bottom left hand corner of the screen, and open an elevated command prompt. Then go ahead and paste the following into the command prompt window. powershell.exe -ExecutionPolicy Unrestricted -File C:\Users\Taylor\Documents\HTGWindows8Converter.ps1 Note: You will need to replace the path to the script, another thing to note is that if the path you replace it with has spaces you will need to enclose the path in quotes. The script should kick off straight away and has some progress bars you can watch while it does its thing. Half way through another Window will pop open, which will start creating your final ISO image. When its complete, close the command prompt and you should have an ISO image on the root of your C drive called: HTGWindows8.iso That’s all there is to it. 7 Ways To Free Up Hard Disk Space On Windows HTG Explains: How System Restore Works in Windows HTG Explains: How Antivirus Software Works

  Read the article

• Unable to sign in. How to debug?

  - by Dmitriy Budnik

  I had to reboot system with reset button. After reboot I can't sign in. When I enter my password It seems like X-server just restarts. I can sing in as guest and also I can sign in in text TTY. Here is first 150 lines of my lightdm.log: [+0.04s] DEBUG: Logging to /var/log/lightdm/lightdm.log [+0.04s] DEBUG: Starting Light Display Manager 1.2.1, UID=0 PID=1070 [+0.04s] DEBUG: Loaded configuration from /etc/lightdm/lightdm.conf [+0.04s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager [+0.04s] DEBUG: Registered seat module xlocal [+0.04s] DEBUG: Registered seat module xremote [+0.04s] DEBUG: Adding default seat [+0.04s] DEBUG: Starting seat [+0.04s] DEBUG: Starting new display for automatic login as user dmytro [+0.04s] DEBUG: Starting local X display [+3.64s] DEBUG: X server :0 will replace Plymouth [+3.66s] DEBUG: Using VT 7 [+3.66s] DEBUG: Activating VT 7 [+3.66s] DEBUG: Logging to /var/log/lightdm/x-0.log [+3.66s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0 [+3.66s] DEBUG: Launching X Server [+3.66s] DEBUG: Launching process 1154: /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none [+3.66s] DEBUG: Waiting for ready signal from X server :0 [+3.66s] DEBUG: Acquired bus name org.freedesktop.DisplayManager [+3.66s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0 [+10.78s] DEBUG: Got signal 10 from process 1154 [+10.78s] DEBUG: Got signal from X server :0 [+10.78s] DEBUG: Stopping Plymouth, X server is ready [+10.80s] DEBUG: Connecting to XServer :0 [+10.80s] DEBUG: Automatically logging in user dmytro [+10.80s] DEBUG: Started session 1303 with service 'lightdm-autologin', username 'dmytro' [+13.22s] DEBUG: Session 1303 authentication complete with return value 0: Success [+13.26s] DEBUG: Autologin user dmytro authorized [+13.27s] DEBUG: Autologin using session ubuntu [+14.44s] DEBUG: Dropping privileges to uid 1000 [+14.48s] DEBUG: Restoring privileges [+14.49s] DEBUG: Dropping privileges to uid 1000 [+14.49s] DEBUG: Writing /home/dmytro/.dmrc [+14.61s] DEBUG: Restoring privileges [+14.81s] DEBUG: Starting session ubuntu as user dmytro [+14.81s] DEBUG: Session 1303 running command /usr/sbin/lightdm-session gnome-session --session=ubuntu [+15.76s] DEBUG: New display ready, switching to it [+15.76s] DEBUG: Activating VT 7 [+15.76s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session0 [+16.63s] DEBUG: Session 1303 exited with return value 0 [+16.63s] DEBUG: User session quit [+16.63s] DEBUG: Stopping display [+16.63s] DEBUG: Sending signal 15 to process 1154 [+17.19s] DEBUG: Process 1154 exited with return value 0 [+17.19s] DEBUG: X server stopped [+17.19s] DEBUG: Removing X server authority /var/run/lightdm/root/:0 [+17.19s] DEBUG: Releasing VT 7 [+17.19s] DEBUG: Display server stopped [+17.19s] DEBUG: Display stopped [+17.19s] DEBUG: Active display stopped, switching to greeter [+17.19s] DEBUG: Switching to greeter [+17.19s] DEBUG: Starting new display for greeter [+17.19s] DEBUG: Starting local X display [+17.19s] DEBUG: Using VT 7 [+17.19s] DEBUG: Logging to /var/log/lightdm/x-0.log [+17.19s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0 [+17.19s] DEBUG: Launching X Server [+17.19s] DEBUG: Launching process 1563: /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch [+17.19s] DEBUG: Waiting for ready signal from X server :0 [+17.48s] DEBUG: Got signal 10 from process 1563 [+17.48s] DEBUG: Got signal from X server :0 [+17.48s] DEBUG: Connecting to XServer :0 [+17.48s] DEBUG: Starting greeter [+17.48s] DEBUG: Started session 1575 with service 'lightdm', username 'lightdm' [+17.61s] DEBUG: Session 1575 authentication complete with return value 0: Success [+17.61s] DEBUG: Greeter authorized [+17.61s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log [+17.68s] DEBUG: Session 1575 running command /usr/lib/lightdm/lightdm-greeter-session /usr/sbin/unity-greeter [+20.86s] DEBUG: Greeter connected version=1.2.1 [+20.86s] DEBUG: Greeter connected, display is ready [+20.86s] DEBUG: New display ready, switching to it [+20.86s] DEBUG: Activating VT 7 [+20.86s] DEBUG: Stopping greeter display being switched from [+24.90s] DEBUG: Greeter start authentication for dmytro [+24.90s] DEBUG: Started session 1746 with service 'lightdm', username 'dmytro' [+25.10s] DEBUG: Session 1746 got 1 message(s) from PAM [+25.10s] DEBUG: Prompt greeter with 1 message(s) [+31.87s] DEBUG: Continue authentication [+33.75s] DEBUG: Session 1746 authentication complete with return value 7: Authentication failure [+33.75s] DEBUG: Authenticate result for user dmytro: Authentication failure [+33.75s] DEBUG: Greeter start authentication for dmytro [+33.75s] DEBUG: Session 1746: Sending SIGTERM [+33.75s] DEBUG: Started session 2264 with service 'lightdm', username 'dmytro' [+33.75s] DEBUG: Session 2264 got 1 message(s) from PAM [+33.75s] DEBUG: Prompt greeter with 1 message(s) [+36.41s] DEBUG: Continue authentication [+36.53s] DEBUG: Session 2264 authentication complete with return value 0: Success [+36.53s] DEBUG: Authenticate result for user dmytro: Success [+36.54s] DEBUG: User dmytro authorized [+36.54s] DEBUG: Greeter requests session ubuntu [+36.54s] DEBUG: Using session ubuntu [+36.54s] DEBUG: Stopping greeter [+36.54s] DEBUG: Session 1575: Sending SIGTERM [+37.41s] DEBUG: Greeter closed communication channel [+37.41s] DEBUG: Session 1575 exited with return value 0 [+37.41s] DEBUG: Greeter quit [+37.42s] DEBUG: Dropping privileges to uid 1000 [+37.42s] DEBUG: Restoring privileges [+37.43s] DEBUG: Dropping privileges to uid 1000 [+37.43s] DEBUG: Writing /home/dmytro/.dmrc [+38.35s] DEBUG: Restoring privileges [+40.37s] DEBUG: Starting session ubuntu as user dmytro [+40.37s] DEBUG: Session 2264 running command /usr/sbin/lightdm-session gnome-session --session=ubuntu [+40.39s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session1 [+50.78s] DEBUG: Session 2264 exited with return value 0 [+50.78s] DEBUG: User session quit [+50.78s] DEBUG: Stopping display [+50.78s] DEBUG: Sending signal 15 to process 1563 [+51.53s] DEBUG: Process 1563 exited with return value 0 [+51.53s] DEBUG: X server stopped [+51.53s] DEBUG: Removing X server authority /var/run/lightdm/root/:0 [+51.53s] DEBUG: Releasing VT 7 [+51.53s] DEBUG: Display server stopped [+51.53s] DEBUG: Display stopped [+51.53s] DEBUG: Active display stopped, switching to greeter [+51.53s] DEBUG: Switching to greeter [+51.53s] DEBUG: Starting new display for greeter [+51.53s] DEBUG: Starting local X display [+51.53s] DEBUG: Using VT 7 [+51.53s] DEBUG: Logging to /var/log/lightdm/x-0.log [+51.53s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0 [+51.53s] DEBUG: Launching X Server [+51.53s] DEBUG: Launching process 2894: /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch [+51.53s] DEBUG: Waiting for ready signal from X server :0 [+51.75s] DEBUG: Got signal 10 from process 2894 [+51.75s] DEBUG: Got signal from X server :0 [+51.75s] DEBUG: Connecting to XServer :0 [+51.75s] DEBUG: Starting greeter [+51.75s] DEBUG: Started session 2898 with service 'lightdm', username 'lightdm' [+51.76s] DEBUG: Session 2898 authentication complete with return value 0: Success [+51.76s] DEBUG: Greeter authorized [+51.76s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log [+51.76s] DEBUG: Session 2898 running command /usr/lib/lightdm/lightdm-greeter-session /usr/sbin/unity-greeter [+53.26s] DEBUG: Greeter connected version=1.2.1 [+53.26s] DEBUG: Greeter connected, display is ready [+53.26s] DEBUG: New display ready, switching to it [+53.26s] DEBUG: Activating VT 7 [+53.26s] DEBUG: Stopping greeter display being switched from [+54.17s] DEBUG: Greeter start authentication for dmytro [+54.17s] DEBUG: Started session 3152 with service 'lightdm', username 'dmytro' [+54.18s] DEBUG: Session 3152 got 1 message(s) from PAM [+54.18s] DEBUG: Prompt greeter with 1 message(s) [+58.61s] DEBUG: Continue authentication [+58.65s] DEBUG: Session 3152 authentication complete with return value 0: Success [+58.65s] DEBUG: Authenticate result for user dmytro: Success [+58.66s] DEBUG: User dmytro authorized [+58.66s] DEBUG: Greeter requests session ubuntu [+58.66s] DEBUG: Using session ubuntu [+58.66s] DEBUG: Stopping greeter [+58.66s] DEBUG: Session 2898: Sending SIGTERM How can I fix it? What other .log files could possibly give me a clue? Update: Possibly it's duplicate of Desktop login fails, terminal works

  Read the article

• Package Manager Console For More Than Managing Packages

  - by Steve Michelotti

  Like most developers, I prefer to not have to pick up the mouse if I don’t have to. I use the Executor launcher for almost everything so it’s extremely rare for me to ever click the “Start” button in Windows. I also use shortcuts keys when I can so I don’t have to pick up the mouse. By now most people know that the Package Manager Console that comes with NuGet is PowerShell embedded inside of Visual Studio. It is based on its PowerConsole predecessor which was the first (that I’m aware of) to embed PowerShell inside of Visual Studio and give access to the Visual Studio automation DTE object. It does this through an inherent $dte variable that is automatically available and ready for use. This variable is also available inside of the NuGet Package Manager console. Adding a new class file to a Visual Studio project is one of those mundane tasks that should be easier. First I have to pick up the mouse. Then I have to right-click where I want it file to go and select “Add –> New Item…” or “Add –> Class…”   If you know the Ctrl+Shift+A shortcut, then you can avoid the mouse for adding a new item but you have to manually assign a shortcut for adding a new class. At this point it pops up a dialog just so I can enter the name of the class I want. Since this is one of the most common tasks developers do, I figure there has to be an easier way and a way that avoids picking up the mouse and popping up dialogs. This is where your embedded PowerShell prompt in Visual Studio comes in. The first thing you should do is to assign a keyboard shortcut so that you can get a PowerShell prompt (i.e., the Package Manager console) quickly without ever picking up the mouse. I assign “Ctrl+P, Ctrl+M” because “P + M” stands for “Package Manager” so it is easy to remember:   At this point I can type this command to add a new class: PM> $dte.ItemOperations.AddNewItem("Code\Class", "Foo.cs") which will result in the class being added: At this point I’ve satisfied my original goal of not having to pick up a mouse and not having the “Add New Item” dialog pop up. However, having to remember that $dte method call is not very user-friendly at all. The best thing to do is to make this a re-usable function that always loads when Visual Studio starts up. There is a $profile variable that you can use to figure out where that location is for your machine: PM> $profile C:\Users\steve.michelotti\Documents\WindowsPowerShell\NuGet_profile.ps1 If the NuGet_profile.ps1 file does not already exist, you can just create it yourself and place it in the directory. Now you can put a function inside like this: 1: function addClass($className) 2: { 3: if ($className.EndsWith(".cs") -eq $false) { 4: $className = $className + ".cs" 5: } 6: 7: $dte.ItemOperations.AddNewItem("Code\Class", $className) 8: } Since it’s in the NuGet_profile.ps1 file, this function will automatically always be available for me after starting Visual Studio. Now I can simply do this: PM> addClass Foo At this point, we have a *very* nice developer experience. All I did to add a new class was: “Ctrl-P, Ctrl-M”, then “addClass Foo”. No mouse, no pop up dialogs, no complex commands to remember. In fact, PowerShell gives you auto-completion as well. If I type “addc” followed by [TAB], then intellisense pops up: You can see my custom function appear in intellisense above. Now I can type the next letter “c” and [TAB] to auto-complete the command. And if that’s still too many key strokes for you, then you can create your own PowerShell custom alias for your function like this: PM> Set-Alias addc addClass PM> addc Foo While all this is very useful, I did run into some issues which prompted me to make even further customization. This command will add the new class file to the current active directory. Depending on your context, this may not be what you want. For example, by convention all view model objects go in the “Models” folder in an MVC project. So if the current document is in the Controllers folder, it will add your class to that folder which is not what you want. You want it to always add it to the “Models” folder if you are adding a new model in an MVC project. For this situation, I added a new function called “addModel” which looks like this: 1: function addModel($className) 2: { 3: if ($className.EndsWith(".cs") -eq $false) { 4: $className = $className + ".cs" 5: } 6: 7: $modelsDir = $dte.ActiveSolutionProjects[0].UniqueName.Replace(".csproj", "") + "\Models" 8: $dte.Windows.Item([EnvDTE.Constants]::vsWindowKindSolutionExplorer).Activate() 9: $dte.ActiveWindow.Object.GetItem($modelsDir).Select([EnvDTE.vsUISelectionType]::vsUISelectionTypeSelect) 10: $dte.ItemOperations.AddNewItem("Code\Class", $className) 11: } First I figure out the path to the Models directory on line #7. Then I activate the Solution Explorer window on line #8. Then I make sure the Models directory is selected so that my context is correct when I add the new class and it will be added to the Models directory as desired. These are just a couple of examples for things you can do with the PowerShell prompt that you have available in the Package Manager console. As developers we spend so much time in Visual Studio, why would you not customize it so that you can work in whatever way you want to work?! The next time you’re not happy about the way Visual Studio makes you do a particular task – automate it! The sky is the limit.

  Read the article

• GRUB is not Booting Correctly

  - by msknapp

  I have a PC with three hard disks. Windows 7 is installed on the first, Ubuntu 14.04 is installed on the third. After I re-booted, it went straight to Windows 7. So I tried explicitly telling my PC to boot using the third hard disk, but that just takes me to the grub rescue prompt. I followed Scott Severence's instructions here to try and recover. Essentially, I updated grub, reinstalled grub, and then updated it again. After re-booting, absolutely nothing had changed. So instead I tried using the boot-repair tool. In the past it had failed for me, saying that I had programs running and it could not unmount drives, when I was running nothing. I never figured out how to solve that problem, but it went away when I bought another hard drive and used that for my Ubuntu installation, I don't know why. In any case, I ran the boot-repair tool and this time it said it was successful. First time for everything right? I re-booted, only to be taken straight to the grub rescue prompt. So I changed my BIOS settings to use the third hard disk for boot start up. That is the same hard drive where I have Ubuntu and grub installed, and the same one that the grub-repair tool told me to use. It still took me straight to the grub rescue prompt. So I went from not being able to boot Ubuntu, to not being able to boot either OS installed on my system. Thanks boot-repair! Boot repair gave me this URL for future troubleshooting: http://paste.ubuntu.com/8131669 When I try to boot from the third hard disk, this is my console: Loading Operating System ... error: attempt to read or write outside of disk 'hd0'. Entering rescue mode... grub rescue> grub rescue> set cmdpath=(hd0) prefix=(hd0,gpt2)/boot/grub root=hd0,gpt2 grub rescue> ls (hd0) (hd0,gpt3) (hd0,gpt2) (hd0,gpt1) (hd1) (hd2) (hd2,gpt2) (hd2,gpt1) (hd3) Those values look correct to me. I have also experimented with changing some of those values, but 'insmod normal' always throws the same error. Somebody please tell me how to fix this. I have tried everything, reinstalling grub, and running boot-repair. =========================== Update: I think the problem might be that the ubuntu installer did not partition my hard disk correctly. I booted from live USB and then launched gparted and looked at how it partitioned things. This is what gparted says: Partition, File System, Size, Used, Unused, Flags /dev/sda1 (!), unknown, 1.00 MiB, ---, ---, bios_grub /dev/sda2, ext4, 2.71 TiB, 47.30 GiB, 2.67 TiB, /dev/sda3, linux-swap, 16.00 GiB, 0.00 B, 16.00 GiB, So that first line looks problematic. It is supposed to be the /boot partition. However, it was given only 1 MiB? I am assuming that MiB is actually supposed to mean megabyte, no idea why that 'i' is there. It also says the file system is unknown. I read the answer by andrew here, and he says he had to do a custom install, explicitly configuring the boot partition. So I think that maybe Ubuntu's installer has a bug in it, where it does not set up the boot partition correctly if you are not installing on the first hard disk in your computer. I am going to try reinstalling with a custom partition scheme. I read elsewhere (askubuntu won't let me post another link) that I don't even need a /boot partition any more. So instead of following Andrew's instructions ver batim, I'm first going to try having just two partitions: one for /, and another for my 16GB swap space. Both as primary partitions. The first will be formatted as ext4. If that doesn't work, I may try again using /boot. ======================== So I did my custom install with no /boot partition, and it did not work. When I rebooted, I had an error message saying that some address did not exist. So for the hundredth time, I booted from the live USB, and ran boot-repair. Now I get this message GPT detected. Please create a BIOS-Boot partition (>1MB, unformatted filesystem, bios_grub flag). This can be performed via tools such as Gparted. Then try again. I feel like I'm running in circles and nobody will help me.

  Read the article

• How to install Oracle Weblogic Server using OS-specific Package installer?(Windows)

  - by PratikS -- Oracle

  Note: OS-specific Package installer As the name suggests the installer is platform specific. It is meant for installation with a 32bit JVM only. Both SUN and JROCKIT 32 bit JDKs come bundled with "OS-specific Package installer", so no need to install the JDK in advance. There are three different ways of installing Oracle Weblogic Server: Graphical mode Console mode Silent mode For Windows: 1) Graphical mode:Installer: wls_<version>_win32.exe (E.g. wls1036_win32.exe)Steps to Install:1) Log in to the Windows system.2) Go to the directory that contains the installation program.3) Double-click the installation file.(wls1036_win32.exe)As soon as you double-click on the installation file you wold see the following screens: Once the installation preparation is complete you will see the welcome screen:  Click Next If there are existing Middleware Home Directories it will list all of them. You may either select an  existing Middleware Home Directory or create a new one. Note: It is always recommended to have one Middleware Home Directory per installation, so I'll select "Create a new Middleware Home" Click Next If you want to register for Security updates enter  your My Oracle Support credentials or else un-check the box, it will prompt to bypass click Yes and then click Next.  Click Next Again Click Next Click Next to All Users to access the Oracle Weblogic Server Installation.  Click Next ( Make sure the more then 1289.8 MB of space is available in the Middleware Home) Wait for the installation to complete. Click Done. And the installation is complete. 2) Console mode: Log in to the target Windows system. Open a command prompt window. Go to the directory that contains the installation program. Launch the installation by entering the name of the installation program.  C:\Documents and Settings\username>d:D:\>cd D:\WLS-InstallerD:\WLS-Installer>dir Volume in drive D is Data Volume Serial Number is 123A-4567 Directory of D:\WLS-Installer07/04/2012  08:02 AM    <DIR>          .07/04/2012  08:02 AM    <DIR>          ..07/04/2012  08:02 AM       859,548,533 wls1036_win32.exe               1 File(s)    859,548,533 bytes               2 Dir(s)  34,745,683,968 bytes freeD:\WLS-Installer>wls1036_win32.exe -mode=console A new prompt will open and you may continue with the installation as follows:  Extracting .................................................................................................... Done<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Welcome:--------This installer will guide you through the installation of WebLogic 10.3.6.0.Type "Next" or enter to proceed to the next prompt.  If you want to change dataentered previously, type "Previous".  You may quit the installer at any time bytyping "Exit".Enter [Exit][Next]>Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Middleware Home Directory:--------------------------------- ->1¦* Create a new Middleware Home   2¦D:\WLS\bea816   3¦D:\WLS\bea923   4¦D:\WLS\bea1033   5¦D:\WLS\bea1032 Enter index number to select OR [Exit][Previous][Next]>Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Middleware Home Directory:---------------------------------    "Middleware Home" = [Enter new value or use default "C:\Oracle\Middleware"]Enter new Middleware Home OR [Exit][Previous][Next]> D:\WLS1036<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Middleware Home Directory:---------------------------------    "Middleware Home" = [D:\WLS1036]Use above value or select another option:    1 - Enter new Middleware Home    2 - Change to default [C:\Oracle\Middleware]Enter option number to select OR [Exit][Previous][Next]>Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.   1¦Email:[]   2¦Support Password:[]   3¦Receive Security Update:[Yes]Enter index number to select OR [Exit][Previous][Next]> 3<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.    "Receive Security Update:" = [Enter new value or use default "Yes"]Enter [Yes][No]? No<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.    "Receive Security Update:" = [Enter new value or use default "Yes"]    ** Do you wish to bypass initiation of the configuration manager and    **  remain uninformed of critical security issues in your configuration?Enter [Yes][No]? Yes<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.   1¦Email:[]   2¦Support Password:[]   3¦Receive Security Update:[No]Enter index number to select OR [Exit][Previous][Next]>Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Register for Security Updates:------------------------------Provide your email address for security updates and  to initiate configuration manager.   1¦Email:[]   2¦Support Password:[]   3¦Receive Security Update:[No]Enter index number to select OR [Exit][Previous][Next]>Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Install Type:--------------------Select the type of installation you wish to perform. ->1¦Typical    ¦  Install the following product(s) and component(s):    ¦ - WebLogic Server    ¦ - Oracle Coherence   2¦Custom    ¦  Choose software products and components to install and perform optional    ¦configuration.Enter index number to select OR [Exit][Previous][Next]>Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Product Installation Directories:----------------------------------------Middleware Home Directory: [D:\WLS1036]Product Installation Directories:   1¦WebLogic Server: [D:\WLS1036\wlserver_10.3]   2¦Oracle Coherence: [D:\WLS1036\coherence_3.7]Enter index number to select OR [Exit][Previous][Next]>Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Shortcut Location:-------------------------    *The installer creates shortcuts to Oracle components, samples, and tools.    *As a user with administrative privileges, you can specify where these    *shortcuts are created. ->1¦"All Users" Start Menu folder (recommended)    ¦For some installations, this setting may limit the automatic creation of    ¦server shortcuts for users without administrative privileges. Refer to the    ¦documentation for more information.   2¦Local user's Start Menu folder    ¦Select this option if you need to ensure that other profiles registered on    ¦this machine will not have access to these shortcuts.Enter index number to select OR [Exit][Previous][Next]>Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Choose Shortcut Location:-------------------------    *Are you sure you wish to create the shortcuts in the selected location?    *    *"All Users" Start Menu folder (recommended)    *For some installations, this setting may limit the automatic creation of    *server shortcuts for users without administrative privileges. Refer to the    *documentation for more information. ->1¦Yes.   2¦No, Go back to the previous screen and make another choice.Enter index number to select OR [Exit][Previous][Next]>Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->The following Products and JDKs will be installed:--------------------------------------------------    WebLogic Platform 10.3.6.0    +----WebLogic Server    ¦    +----Core Application Server    ¦    +----Administration Console    ¦    +----Configuration Wizard and Upgrade Framework    ¦    +----Web 2.0 HTTP Pub-Sub Server    ¦    +----WebLogic SCA    ¦    +----WebLogic JDBC Drivers    ¦    +----Third Party JDBC Drivers    ¦    +----WebLogic Server Clients    ¦    +----WebLogic Web Server Plugins    ¦    +----UDDI and Xquery Support    ¦    +----Evaluation Database    +----Oracle Coherence    ¦    +----Coherence Product Files    +----JDKs         +----SUN SDK 1.6.0_29         +----Oracle JRockit 1.6.0_29 SDK    *Estimated size of installation: 1,289.8 MBEnter [Exit][Previous][Next]>Next<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Installing files..0%          25%          50%          75%          100%[------------|------------|------------|------------][***************************************************]<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Installing JDK....0%          25%          50%          75%          100%[------------|------------|------------|------------][***************************************************]Performing String Substitutions...<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Configuring OCM...0%          25%          50%          75%          100%[------------|------------|------------|------------][***************************************************]Creating Domains...<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->Installation CompleteCongratulations! Installation is complete.Press [Enter] to continue or type [Exit]>...Finish installation. Press any key to close this window... Note: All the inputs are in Bold 3) Silent mode: Coming soon...

  Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >