Search Results

Search found 6520 results on 261 pages for 'sent'.

Page 31/261 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

  • WSASend() with more than one buffer - could complete incomplete?

    - by Poni
    Say I post the following WSASend call (Windows I/O completion ports without callback functions): void send_data() { WSABUF wsaBuff[2]; wsaBuff[0].len = 20; wsaBuff[1].len = 25; WSASend(sock, &wsaBuff[0], 2, ......); } When I get the "write_done" notification from the completion port, is it possible that wsaBuff[1] will be sent completely (25 bytes) yet wsaBuff[0] will be only partially sent (say 7 bytes)?

    Read the article

  • iphone problem receiving UDP packets

    - by SooDesuNe
    I'm using sendto() and recvfrom() to send some simple packets via UDP over WiFI. I've tried using two phones, and a simulator, the results I'm getting are: Packets sent from phones - recieved by simulator Packets sent from simulator - simulator recvfrom remains blocking. Packets sent from phones - other phone recvfrom remains blocking. I'm not sure how to start debugging this one, since the simulator/mac is able to receive the the packets, but the phones don't appear to be getting the message. A slight aside, do I need to keep my packets below the MTU for my network? Or is fragmentation handled by the OS or some other lower level software? UPDATE: I forgot to include the packet size and structure. I'm transmitting: typedef struct PacketForTransmission { int32_t packetTypeIdentifier; char data[64]; // size to fit my biggest struct } PacketForTransmission; of which the char data[64] is: typedef struct PacketHeader{ uint32_t identifier; uint32_t datatype; } PacketHeader; typedef struct BasePacket{ PacketHeader header; int32_t cardValue; char sendingDeviceID[41]; //dont forget to save room for the NULL terminator! } BasePacket; typedef struct PositionPacket{ BasePacket basePacket; int32_t x; int32_t y; } PositionPacket; sending packet is like: PositionPacket packet; bzero(&packet, sizeof(packet)); //fill packet with it's associated data PacketForTransmission transmissionPacket; transmissionPacket.packetTypeIdentifier = kPositionPacketType; memcpy(&transmissionPacket.data, (void*)&packet, sizeof(packet)); //put the PositionPacket into data[64] size_t sendResult = sendto(_socket, &transmissionPacket, sizeof(transmissionPacket), 0, [address bytes], [address length]); NSLog(@"packet sent of size: %i", sendResult); and recieving packets is like: while(1){ char dataBuffer[8192]; struct sockaddr addr; socklen_t socklen = sizeof(addr); ssize_t len = recvfrom(_socket, dataBuffer, sizeof(dataBuffer), 0, &addr, &socklen); //continues blocking here NSLog(@"packet recieved of length: %i", len); //do some more stuff }

    Read the article

  • sending data packet just before closing socket

    - by xopht
    Before disconnect the client, the server wants to send some info to the client - why do I(server) disconnect you(client). If I send packet to the info and close the client socket immediately, closesocket() returns -1 and if I use linger option to work closesocket() successfully, the info cannot be sent completely. How can I complete this and is it possible to know socket buffer is empty(means my packet sent all)? thx.

    Read the article

  • What is the proper HTTP response to send for requests that require SSL

    - by dasil003
    I'm designing an RESTful API where some calls are public over HTTP, and some require an API key and encryption over HTTPS. I'm deliberating on what response code should be sent if an HTTP request is sent to one of the private resources. So far the only one that jumps out at me is 412 - Precondition Failed, but the standard indicates that the precondition is imposed by the requester not the server. Is there an appropriate response code for this condition or do I just need to give in and do 400?

    Read the article

  • Server-based Chat

    - by daemonfire300
    Described on this scheme "Server Clients Scheme" I try to create a Silverlight / Server Application which has EventHandler/Triggers, which can do the following: Notice whether a message was sent to "it" (the server) Notice that the sent message is new "to all" "except" "the sender" Send "to all" ("except...") "new message can be downloaded" / or even the new messages How could this be done by using: ASP.NET and Silverlight?

    Read the article

  • Router Alert options on IGMPv2 packets

    - by Scakko
    I'm trying to forge an IGMPv2 Membership Request packet and send it on a RAW socket. The RFC 3376 states: IGMP messages are encapsulated in IPv4 datagrams, with an IP protocol number of 2. Every IGMP message described in this document is sent with an IP Time-to-Live of 1, IP Precedence of Internetwork Control (e.g., Type of Service 0xc0), and carries an IP Router Alert option [RFC-2113] in its IP header So the IP_ROUTER_ALERT flag must be set. I'm trying to forge the strict necessary of the packet (e.g. only the IGMP header & payload), so i'm using the setsockopt to edit the IP options. some useful variables: #define C_IP_MULTICAST_TTL 1 #define C_IP_ROUTER_ALERT 1 int sockfd = 0; int ecsockopt = 0; int bytes_num = 0; int ip_multicast_ttl = C_IP_MULTICAST_TTL; int ip_router_alert = C_IP_ROUTER_ALERT; Here's how I open the RAW socket: sock_domain = AF_INET; sock_type = SOCK_RAW; sock_proto = IPPROTO_IGMP; if ((ecsockopt = socket(sock_domain,sock_type,sock_proto)) < 0) { printf("Error %d: Can't open socket.\n", errno); return 1; } else { printf("** Socket opened.\n"); } sockfd = ecsockopt; Then I set the TTL and Router Alert option: // Set the sent packets TTL if((ecsockopt = setsockopt(sockfd, IPPROTO_IP, IP_MULTICAST_TTL, &ip_multicast_ttl, sizeof(ip_multicast_ttl))) < 0) { printf("Error %d: Can't set TTL.\n", ecsockopt); return 1; } else { printf("** TTL set.\n"); } // Set the Router Alert if((ecsockopt = setsockopt(sockfd, IPPROTO_IP, IP_ROUTER_ALERT, &ip_router_alert, sizeof(ip_router_alert))) < 0) { printf("Error %d: Can't set Router Alert.\n", ecsockopt); return 1; } else { printf("** Router Alert set.\n"); } The setsockopt of IP_ROUTER_ALERT returns 0. After forging the packet, i send it with sendto in this way: // Send the packet if((bytes_num = sendto(sockfd, packet, packet_size, 0, (struct sockaddr*) &mgroup1_addr, sizeof(mgroup1_addr))) < 0) { printf("Error %d: Can't send Membership report message.\n", bytes_num); return 1; } else { printf("** Membership report message sent. (bytes=%d)\n",bytes_num); } The packet is sent, but the IP_ROUTER_ALERT option (checked with wireshark) is missing. Am i doing something wrong? is there some other methods to set the IP_ROUTER_ALERT option? Thanks in advance.

    Read the article

  • cPanel's SMTP or google hosted SMTP ?

    - by praveen
    Hi, I'm wondering what mail servers I should use for sending mail through my website, avoiding them sent as spam. Hostgator SMTP google hosted SMTP I found that to avoid a mail sent as spam it should have the same host in "From:" and "Received". How to overcome this? Thanks

    Read the article

  • PHP: SUBMIT Type vs IMAGE Type

    - by sebb
    I have noticed that when using a SUBMIT type its name attribute gets passed via POST , while an IMAGE type button do not have this data sent, can any one clear this up for me? In both instances the NAME attribute is present at HTML level, but only the SUMBIT type has the NAME sent via POST....is this right?

    Read the article

  • Send <p> tags and simple HTML formatting through a form via PHP.

    - by Jonathan
    Hi, so I need the user to write a review about an article or book and send it to a DB via PHP but with some basic HTML formatting.. I mean, I have a form , when the user writes the review, the data is sent but without any kind of formatting, If the user want to write in a new line, the text is sent like plain text, I need to get also those new line breaks and simple stuff. I know how to use PHP and DB connection, I just need to know how to get those new line breakes and stuff..

    Read the article

  • A question is related to exception

    - by user217572
    * -[UIDeviceRGBColor size]: unrecognized selector sent to instance 0x31e520 2010-03-18 12:36:48.511 IChitMe[4012:207] Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '** -[UIDeviceRGBColor size]: unrecognized selector sent to instance 0x31e520' I'm getting this exception when I'm clicking on back button of UIToolBar

    Read the article

  • Debuggerproblem

    - by sudhakarilla
    I have problem .. i get debugerror i will used in json 2009-02-13 18:32:17.405 xxxxxxxx[1491:20b] * -[NsDecimalNumber length]: unrecognized selector sent to instance 0xc3f10ff0 2009-02-13 18:32:17.406 xxxxxxxx[1491:20b] Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '** -[NsDecimalNumber length ]: unrecognized selector sent to instance 0xc3f10ff0' 2009-02-13 18:32:17.406 xxxxxxxx[1491:20b] Stack: ( 2417225995, 2527100475, 2417255178, 2417248524, 2417248722, 22199, 9853, 816111650, 816149355, 2458333742, 2416728869, 2416729304, 827745792, 827745989, 816114848, 816160924, 9628, 9482 ) please send soluation...

    Read the article

  • form validation without reset

    - by Paulo Bueno
    Hi guys Is there a way to check the data sent by a form to a PHP page return to the form page WITHOUT resetting the data sent and show a error? The form has 20 fields and I need to check one of them on a bd. If it fails the user may be redirected to the form page with the form populated and displaying a error message on the field which is 'wrong'. I would like any advice of a technique instead of populating each field using PHP.

    Read the article

  • exim redirect mail to a script

    - by DevilWAH
    I am looking to set up a mail relay so that any mail sent to for example @example.com gets parsed be a PHP script. I know to do this for indervidual address I could do some thing like (from the following web site http://evolt.org/incoming_mail_and_php) Con figure an Aliases such as script: |/our/script.php then any emails sent to [email protected] will be passed to the script given.. but how can I make it that every email to @example.com is passed to the script? thank you

    Read the article

  • SDWebImage : setImageWithURL fails when used to set image of a UITableViewCell

    - by Chim
    When call setImageWithURL, it fails with following, [UIImageView setImageWithURL:placeholderImage:]: unrecognized selector sent to instance 0x149a20 2011-12-14 18:11:38.060 [781:707] Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[UIImageView setImageWithURL:placeholderImage:]: unrecognized selector sent to instance 0x149a20' I can confirm I have included SDWebImage project and required headers correctly as I can use the SDWebImageManager successfully. Following is the code where I called the UIImageView category method setImageWithURL NSURL* url = [NSURL URLWithString:@"www.abc.com/abc.png"]; [cell.imageView setImageWithURL:url placeholderImage:[UIImage imageNamed:@"abc.png"]];

    Read the article

  • Wait 30 seconds in order to allow a new action on PHP and MySQL ???

    - by DomingoSL
    Hello, in my web page a user fill a form who send information to a MySql database. One of the data inputs sent is a date/time, in the format date('l jS \of F Y h:i:s A'); (I can change the format as needed) So when the user submits the form i wanna check if the actual time/date is 30 seconds more than the sent time/date in order to allow or not the submission of the form. Thanks!

    Read the article

  • PHP Redirect after execution of code

    - by UmYeah
    I have a php page that takes in a bunch of url parameters and sends out an email. I am trying to have this page call another web page using the same url parameters, after the mail is sent. If I do the following, will my email be sent reliably? Is a redirect what I really want to do? Random code to send email... header('Location: http://www.othersite.com/' + $_SERVER["REQUEST_URI"]);

    Read the article

  • In OpenInviter, problems are there

    - by user275111
    I am able to retrieve Orkut contacts but when i send the message, the message is not being sent to the persons although it is showing -Invites sent successfully!. In Myspace-It is showing-Unable to get contacts ! when i try to get the contacts. Can somebody help me out?

    Read the article

  • Cisco VPN Client dropping connection

    - by IT Team
    Using Windows XP and Cisco VPN client version 5.0.4.xxx to connect to a remote customer site. We are able to establish the connection and start an RDP session, but within 1-2 minutes the connection drops and the VPN connection disconnects. The PC making the connection is on a DMZ which is NATed to a public IP address. If we move the PC directly onto the internet without being on the DMZ the connection works and we don't encounter any disconnects. We use a PIX 515E running 7.2.4 and don't have any problems with similar setups connecting to other customer sites from the DMZ. The VPN setup on the client side is pretty basic, using IPSec over TCP port 10000. Not sure what device they are using on the peer, but my guess would be an ASA. Any idea as to what the problem would be? Below is the logs from the VPN client when the problem occurs. The real IP address has been changed to: RemotePeerIP. 4 14:39:30.593 09/23/09 Sev=Info/4 CM/0x63100024 Attempt connection with server "RemotePeerIP" 5 14:39:30.593 09/23/09 Sev=Info/6 CM/0x6310002F Allocated local TCP port 1942 for TCP connection. 6 14:39:30.796 09/23/09 Sev=Info/4 IPSEC/0x63700008 IPSec driver successfully started 7 14:39:30.796 09/23/09 Sev=Info/4 IPSEC/0x63700014 Deleted all keys 8 14:39:30.796 09/23/09 Sev=Info/6 IPSEC/0x6370002C Sent 256 packets, 0 were fragmented. 9 14:39:30.796 09/23/09 Sev=Info/6 IPSEC/0x63700020 TCP SYN sent to RemotePeerIP, src port 1942, dst port 10000 10 14:39:30.796 09/23/09 Sev=Info/6 IPSEC/0x6370001C TCP SYN-ACK received from RemotePeerIP, src port 10000, dst port 1942 11 14:39:30.796 09/23/09 Sev=Info/6 IPSEC/0x63700021 TCP ACK sent to RemotePeerIP, src port 1942, dst port 10000 12 14:39:30.796 09/23/09 Sev=Warning/3 IPSEC/0xA370001C Bad cTCP trailer, Rsvd 26984, Magic# 63697672h, trailer len 101, MajorVer 13, MinorVer 10 13 14:39:30.796 09/23/09 Sev=Info/4 CM/0x63100029 TCP connection established on port 10000 with server "RemotePeerIP" 14 14:39:31.296 09/23/09 Sev=Info/4 CM/0x63100024 Attempt connection with server "RemotePeerIP" 15 14:39:31.296 09/23/09 Sev=Info/6 IKE/0x6300003B Attempting to establish a connection with RemotePeerIP. 16 14:39:31.296 09/23/09 Sev=Info/4 IKE/0x63000013 SENDING ISAKMP OAK AG (SA, KE, NON, ID, VID(Xauth), VID(dpd), VID(Frag), VID(Unity)) to RemotePeerIP 17 14:39:36.296 09/23/09 Sev=Info/4 IKE/0x63000021 Retransmitting last packet! 18 14:39:36.296 09/23/09 Sev=Info/4 IKE/0x63000013 SENDING ISAKMP OAK AG (Retransmission) to RemotePeerIP 19 14:39:41.296 09/23/09 Sev=Info/4 IKE/0x63000021 Retransmitting last packet! 20 14:39:41.296 09/23/09 Sev=Info/4 IKE/0x63000013 SENDING ISAKMP OAK AG (Retransmission) to RemotePeerIP 21 14:39:46.296 09/23/09 Sev=Info/4 IKE/0x63000021 Retransmitting last packet! 22 14:39:46.296 09/23/09 Sev=Info/4 IKE/0x63000013 SENDING ISAKMP OAK AG (Retransmission) to RemotePeerIP 23 14:39:51.328 09/23/09 Sev=Info/4 IKE/0x63000017 Marking IKE SA for deletion (I_Cookie=AEFC3FFF0405BBD6 R_Cookie=0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING 24 14:39:51.828 09/23/09 Sev=Info/4 IKE/0x6300004B Discarding IKE SA negotiation (I_Cookie=AEFC3FFF0405BBD6 R_Cookie=0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING 25 14:39:51.828 09/23/09 Sev=Info/4 CM/0x63100014 Unable to establish Phase 1 SA with server "RemotePeerIP" because of "DEL_REASON_PEER_NOT_RESPONDING" 26 14:39:51.828 09/23/09 Sev=Info/5 CM/0x63100025 Initializing CVPNDrv 27 14:39:51.828 09/23/09 Sev=Info/4 CM/0x6310002D Resetting TCP connection on port 10000 28 14:39:51.828 09/23/09 Sev=Info/6 CM/0x63100030 Removed local TCP port 1942 for TCP connection. 29 14:39:51.828 09/23/09 Sev=Info/6 CM/0x63100046 Set tunnel established flag in registry to 0. 30 14:39:51.828 09/23/09 Sev=Info/4 IKE/0x63000001 IKE received signal to terminate VPN connection 31 14:39:52.328 09/23/09 Sev=Info/6 IPSEC/0x63700023 TCP RST sent to RemotePeerIP, src port 1942, dst port 10000 32 14:39:52.328 09/23/09 Sev=Info/4 IPSEC/0x63700014 Deleted all keys 33 14:39:52.328 09/23/09 Sev=Info/4 IPSEC/0x63700014 Deleted all keys 34 14:39:52.328 09/23/09 Sev=Info/4 IPSEC/0x63700014 Deleted all keys 35 14:39:52.328 09/23/09 Sev=Info/4 IPSEC/0x6370000A IPSec driver successfully stopped Thank you for any help you can provide.

    Read the article

  • PPPTP VPN from Ubuntu cannot connect

    - by Andrea Polci
    I'm trying to configure under Linux (Kubuntu 9.10) a VPN I already use from Windows. I installed the network-manager-pptp package and added the vpn under Network Manager. These are the parameter under "advanced" button: Authentication Methods: PAP, CHAP, MSCHAP, SMCHAP2, EAP (I tried also with MSCHAP and MSCHAP2 only) Use MPPE Encryption: yes Crypto: Any Use stateful encryption: no Compression: Allow BSD compression: yes Allow Deflate compression: yes Allow TCP header compression: yes Send PPP echo packets: no When I try to connnect it doesn't work and this is what I get in the system log: 2010-04-08 13:53:47 pcelena NetworkManager <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'... 2010-04-08 13:53:47 pcelena NetworkManager <info> VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 4931 2010-04-08 13:53:47 pcelena NetworkManager <info> VPN service 'org.freedesktop.NetworkManager.pptp' just appeared, activating connections 2010-04-08 13:53:47 pcelena pppd[4932] Plugin /usr/lib/pppd/2.4.5//nm-pptp-pppd-plugin.so loaded. 2010-04-08 13:53:47 pcelena NetworkManager <info> VPN plugin state changed: 3 2010-04-08 13:53:47 pcelena pppd[4932] pppd 2.4.5 started by root, uid 0 2010-04-08 13:53:47 pcelena NetworkManager <info> VPN connection 'MYVPN' (Connect) reply received. 2010-04-08 13:53:47 pcelena NetworkManager SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) 2010-04-08 13:53:47 pcelena NetworkManager SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. 2010-04-08 13:53:47 pcelena pppd[4932] Using interface ppp0 2010-04-08 13:53:47 pcelena pppd[4932] Connect: ppp0 <--> /dev/pts/2 2010-04-08 13:53:47 pcelena pptp[4934] nm-pptp-service-4931 log[main:pptp.c:314]: The synchronous pptp option is NOT activated 2010-04-08 13:53:47 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 7 'Outgoing-Call-Request' 2010-04-08 13:53:47 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_disp:pptp_ctrl.c:858]: Received Outgoing Call Reply. 2010-04-08 13:53:47 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_disp:pptp_ctrl.c:897]: Outgoing call established (call ID 1, peer's call ID 14800). 2010-04-08 13:53:48 pcelena pppd[4932] CHAP authentication succeeded 2010-04-08 13:53:48 pcelena pppd[4932] CHAP authentication succeeded 2010-04-08 13:53:48 pcelena pppd[4932] LCP terminated by peer 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_disp:pptp_ctrl.c:929]: Call disconnect notification received (call id 14800) 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_disp:pptp_ctrl.c:788]: Received Stop Control Connection Request. 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 4 'Stop-Control-Connection-Reply' 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[callmgr_main:pptp_callmgr.c:258]: Closing connection (shutdown) 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 12 'Call-Clear-Request' 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[callmgr_main:pptp_callmgr.c:258]: Closing connection (shutdown) 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 12 'Call-Clear-Request' 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[call_callback:pptp_callmgr.c:79]: Closing connection (call state) 2010-04-08 13:53:48 pcelena pppd[4932] Modem hangup 2010-04-08 13:53:48 pcelena pppd[4932] Connection terminated. 2010-04-08 13:53:48 pcelena NetworkManager <info> VPN plugin failed: 1 2010-04-08 13:53:48 pcelena NetworkManager SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0) 2010-04-08 13:53:48 pcelena pppd[4932] Exit. 2010-04-08 13:53:48 pcelena NetworkManager <info> VPN plugin failed: 1 2010-04-08 13:53:48 pcelena NetworkManager <info> VPN plugin state changed: 6 2010-04-08 13:53:48 pcelena NetworkManager <info> VPN plugin state change reason: 0 2010-04-08 13:53:48 pcelena NetworkManager <WARN> connection_state_changed(): Could not process the request because no VPN connection was active. 2010-04-08 13:53:48 pcelena NetworkManager <info> Policy set 'Auto eth0' (eth0) as default for routing and DNS. 2010-04-08 13:54:01 pcelena NetworkManager <debug> [1270727641.001390] ensure_killed(): waiting for vpn service pid 4931 to exit 2010-04-08 13:54:01 pcelena NetworkManager <debug> [1270727641.001479] ensure_killed(): vpn service pid 4931 cleaned up Does anyone has suggestion on what can be the problem and how to make it work?

    Read the article

  • ssh authentication nfs

    - by user40135
    Hi all I would like to do ssh from machine "ub0" to another machine "ub1" without using passwords. I setup using nfs on "ub0" but still I am asked to insert a password. Here is my scenario: * machine ub0 and ub1 have the same user "mpiu", with same pwd, same userid, and same group id * the 2 servers are sharing a folder that is the HOME directory for "mpiu" * I did a chmod 700 on the .ssh * I created a key using ssh-keygene -t dsa * I did "cat id_dsa.pub authorized_keys". On this last file I tried also chmod 600 and chmod 640 * off course I can guarantee that on machine ub1 the user "shared_user" can see the same fodler that wes mounted with no problem. Below the content of my .ssh folder Code: authorized_keys id_dsa id_dsa.pub known_hosts After all of this calling wathever function "ssh ub1 hostname" I am requested my password. Do you know what I can try? I also UNcommented in the ssh_config file for both machines this line IdentityFile ~/.ssh/id_dsa I also tried ssh -i $HOME/.ssh/id_dsa mpiu@ub1 Below the ssh -vv Code: OpenSSH_5.1p1 Debian-3ubuntu1, OpenSSL 0.9.8g 19 Oct 2007 OpenSSH_5.1p1 Debian-3ubuntu1, OpenSSL 0.9.8g 19 Oct 2007 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to ub1 [192.168.2.9] port 22. debug1: Connection established. debug2: key_type_from_name: unknown key type '-----BEGIN' debug2: key_type_from_name: unknown key type '-----END' debug1: identity file /mirror/mpiu/.ssh/id_dsa type 2 debug1: Checking blacklist file /usr/share/ssh/blacklist.DSA-1024 debug1: Checking blacklist file /etc/ssh/blacklist.DSA-1024 debug1: Remote protocol version 2.0, remote software version lshd-2.0.4 lsh - a GNU ssh debug1: no match: lshd-2.0.4 lsh - a GNU ssh debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1p1 Debian-3ubuntu1 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,spki-sign-rsa debug2: kex_parse_kexinit: aes256-cbc,3des-cbc,blowfish-cbc,arcfour debug2: kex_parse_kexinit: aes256-cbc,3des-cbc,blowfish-cbc,arcfour debug2: kex_parse_kexinit: hmac-sha1,hmac-md5 debug2: kex_parse_kexinit: hmac-sha1,hmac-md5 debug2: kex_parse_kexinit: none,zlib debug2: kex_parse_kexinit: none,zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server-client 3des-cbc hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client-server 3des-cbc hmac-md5 none debug2: dh_gen_key: priv key bits set: 183/384 debug2: bits set: 1028/2048 debug1: sending SSH2_MSG_KEXDH_INIT debug1: expecting SSH2_MSG_KEXDH_REPLY debug1: Host 'ub1' is known and matches the RSA host key. debug1: Found key in /mirror/mpiu/.ssh/known_hosts:1 debug2: bits set: 1039/2048 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /mirror/mpiu/.ssh/id_dsa (0xb874b098) debug1: Authentications that can continue: password,publickey debug1: Next authentication method: publickey debug1: Offering public key: /mirror/mpiu/.ssh/id_dsa debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: password,publickey debug2: we did not send a packet, disable method debug1: Next authentication method: password mpiu@ub1's password: I hangs here!

    Read the article

  • How could I stop ssh offering a wrong key?

    - by Alvaro Maceda
    (This is a problem with ssh, not gitolite) I've configured gitolite on my home server (ubuntu 12.04 server, open-ssh). I want an special identityfile to administer the repositories, so I need to access throught ssh to my own host ussing two different identity keys. This is the content of my .ssh/config file: Host gitadmin.gammu.com User git IdentityFile /home/alvaro/.ssh/id_gitolite_mantra Host git.gammu.com User git IdentityFile /home/alvaro/.ssh/id_alvaro_mantra This is the content of my hosts file: # Git 127.0.0.1 gitadmin.gammu.com 127.0.0.1 git.gammu.com So I should be able to communicate with gitolite this way to access with the "normal" account: $ssh git.gammu.com and this way to access with the administrative account: $ssh gitadmin.gammu.com When I try to access with the normal account, all is ok: alvaro@mantra:~/.ssh$ ssh git.gammu.com PTY allocation request failed on channel 0 hello alvaro, this is gitolite 2.2-1 (Debian) running on git 1.7.9.5 the gitolite config gives you the following access: @R_ @W_ testing Connection to git.gammu.com closed. When I do the same with the administrative account: alvaro@mantra:~$ ssh gitadmin.gammu.com PTY allocation request failed on channel 0 hello alvaro, this is gitolite 2.2-1 (Debian) running on git 1.7.9.5 the gitolite config gives you the following access: @R_ @W_ testing Connection to gitadmin.gammu.com closed. It should show the administrative repository. If I launch ssh with verbose option: ssh -vvv gitadmin.gammu.com ... debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/alvaro/.ssh/id_alvaro_mantra (0x7f7cb6c0fbc0) debug2: key: /home/alvaro/.ssh/id_gitolite_mantra (0x7f7cb6c044d0) debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/alvaro/.ssh/id_alvaro_mantra debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Server accepts key: pkalg ssh-rsa blen 279 ... It's offering the key id_alvaro_mantra, and it should'nt!! The same happens when I specify the key with the -i option: ssh -i /home/alvaro/.ssh/id_gitolite_mantra -vvv gitadmin.gammu.com ... debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/alvaro/.ssh/id_alvaro_mantra (0x7fa365237f90) debug2: key: /home/alvaro/.ssh/id_gitolite_mantra (0x7fa365230550) debug2: key: /home/alvaro/.ssh/id_gitolite_mantra (0x7fa365231050) debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/alvaro/.ssh/id_alvaro_mantra debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Server accepts key: pkalg ssh-rsa blen 279 debug2: input_userauth_pk_ok: fp 36:b1:43:36:af:4f:00:e5:e1:39:50:7e:07:80:14:26 debug3: sign_and_send_pubkey: RSA 36:b1:43:36:af:4f:00:e5:e1:39:50:7e:07:80:14:26 debug1: Authentication succeeded (publickey). ... What the hell is happening??? I'm missing something, but I can't find what. These are the contents of my home dir: -rw-rw-r-- 1 alvaro alvaro 395 nov 14 18:00 authorized_keys -rw-rw-r-- 1 alvaro alvaro 326 nov 21 10:21 config -rw------- 1 alvaro alvaro 137 nov 20 20:26 environment -rw------- 1 alvaro alvaro 1766 nov 20 21:41 id_alvaromaceda.es -rw-r--r-- 1 alvaro alvaro 404 nov 20 21:41 id_alvaromaceda.es.pub -rw------- 1 alvaro alvaro 1766 nov 14 17:59 id_alvaro_mantra -rw-r--r-- 1 alvaro alvaro 395 nov 14 17:59 id_alvaro_mantra.pub -rw------- 1 alvaro alvaro 771 nov 14 18:03 id_developer_mantra -rw------- 1 alvaro alvaro 1679 nov 20 12:37 id_dos_pruebasgit -rw-r--r-- 1 alvaro alvaro 395 nov 20 12:37 id_dos_pruebasgit.pub -rw------- 1 alvaro alvaro 1679 nov 20 12:46 id_gitolite_mantra -rw-r--r-- 1 alvaro alvaro 397 nov 20 12:46 id_gitolite_mantra.pub -rw------- 1 alvaro alvaro 1675 nov 20 21:44 id_gitpruebas.es -rw-r--r-- 1 alvaro alvaro 408 nov 20 21:44 id_gitpruebas.es.pub -rw------- 1 alvaro alvaro 1679 nov 20 12:34 id_uno_pruebasgit -rw-r--r-- 1 alvaro alvaro 395 nov 20 12:34 id_uno_pruebasgit.pub -rw-r--r-- 1 alvaro alvaro 2434 nov 21 10:11 known_hosts There are a bunch of other keys which aren't offered... why id_alvaro_mantra is offered and not the other keys? I can't understand. I need some help, don't know where to look....

    Read the article

  • PPTP VPN from Ubuntu cannot connect

    - by Andrea Polci
    I'm trying to configure under Linux (Kubuntu 9.10) a VPN I already use from Windows. I installed the network-manager-pptp package and added the VPN under Network Manager. These are the parameters under "advanced" button: Authentication Methods: PAP, CHAP, MSCHAP, MSCHAP2, EAP (I also tried "MSCHAP, MSCHAP2") Use MPPE Encryption: yes Crypto: Any Use stateful encryption: no Allow BSD compression: yes Allow Deflate compression: yes Allow TCP header compression: yes Send PPP echo packets: no When I try to connnect it doesn't work and this is what I get in the system log: 2010-04-08 13:53:47 pcelena NetworkManager <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'... 2010-04-08 13:53:47 pcelena NetworkManager <info> VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 4931 2010-04-08 13:53:47 pcelena NetworkManager <info> VPN service 'org.freedesktop.NetworkManager.pptp' just appeared, activating connections 2010-04-08 13:53:47 pcelena pppd[4932] Plugin /usr/lib/pppd/2.4.5//nm-pptp-pppd-plugin.so loaded. 2010-04-08 13:53:47 pcelena NetworkManager <info> VPN plugin state changed: 3 2010-04-08 13:53:47 pcelena pppd[4932] pppd 2.4.5 started by root, uid 0 2010-04-08 13:53:47 pcelena NetworkManager <info> VPN connection 'MYVPN' (Connect) reply received. 2010-04-08 13:53:47 pcelena NetworkManager SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) 2010-04-08 13:53:47 pcelena NetworkManager SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. 2010-04-08 13:53:47 pcelena pppd[4932] Using interface ppp0 2010-04-08 13:53:47 pcelena pppd[4932] Connect: ppp0 <--> /dev/pts/2 2010-04-08 13:53:47 pcelena pptp[4934] nm-pptp-service-4931 log[main:pptp.c:314]: The synchronous pptp option is NOT activated 2010-04-08 13:53:47 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 7 'Outgoing-Call-Request' 2010-04-08 13:53:47 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_disp:pptp_ctrl.c:858]: Received Outgoing Call Reply. 2010-04-08 13:53:47 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_disp:pptp_ctrl.c:897]: Outgoing call established (call ID 1, peer's call ID 14800). 2010-04-08 13:53:48 pcelena pppd[4932] CHAP authentication succeeded 2010-04-08 13:53:48 pcelena pppd[4932] CHAP authentication succeeded 2010-04-08 13:53:48 pcelena pppd[4932] LCP terminated by peer 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_disp:pptp_ctrl.c:929]: Call disconnect notification received (call id 14800) 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_disp:pptp_ctrl.c:788]: Received Stop Control Connection Request. 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 4 'Stop-Control-Connection-Reply' 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[callmgr_main:pptp_callmgr.c:258]: Closing connection (shutdown) 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 12 'Call-Clear-Request' 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[callmgr_main:pptp_callmgr.c:258]: Closing connection (shutdown) 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 12 'Call-Clear-Request' 2010-04-08 13:53:48 pcelena pptp[4927] nm-pptp-service-4918 log[call_callback:pptp_callmgr.c:79]: Closing connection (call state) 2010-04-08 13:53:48 pcelena pppd[4932] Modem hangup 2010-04-08 13:53:48 pcelena pppd[4932] Connection terminated. 2010-04-08 13:53:48 pcelena NetworkManager <info> VPN plugin failed: 1 2010-04-08 13:53:48 pcelena NetworkManager SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0) 2010-04-08 13:53:48 pcelena pppd[4932] Exit. 2010-04-08 13:53:48 pcelena NetworkManager <info> VPN plugin failed: 1 2010-04-08 13:53:48 pcelena NetworkManager <info> VPN plugin state changed: 6 2010-04-08 13:53:48 pcelena NetworkManager <info> VPN plugin state change reason: 0 2010-04-08 13:53:48 pcelena NetworkManager <WARN> connection_state_changed(): Could not process the request because no VPN connection was active. 2010-04-08 13:53:48 pcelena NetworkManager <info> Policy set 'Auto eth0' (eth0) as default for routing and DNS. 2010-04-08 13:54:01 pcelena NetworkManager <debug> [1270727641.001390] ensure_killed(): waiting for vpn service pid 4931 to exit 2010-04-08 13:54:01 pcelena NetworkManager <debug> [1270727641.001479] ensure_killed(): vpn service pid 4931 cleaned up The error that sticks out here is "pppd[4932] LCP terminated by peer". Does anyone has suggestion on what can be the problem and how to make it work?

    Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >