Search Results

Search found 29064 results on 1163 pages for 'network management'.

Page 310/1163 | < Previous Page | 306 307 308 309 310 311 312 313 314 315 316 317  | Next Page >

• Is it possible to cause artificial network packet loss or latency?

  - by nbolton

  I'm trying to reproduce some issues on a deployed application where the MSSQL server and client are running in two separate machines. I think there may be network issues between the two machines, so I'd like to try and reproduce these conditions on two Hyper-V virtual machines (on the same virtual server). Of course, the network for these virtual machines is "local" so it's actually far from the conditions in a live environment. Is there a program I can run on either virtual machine which will degrade the network performance? Or maybe any other work arounds? For example, one way to reproduce the conditions may be to run the VMs on separate Hyper-V servers in geographically dispersed locations (so the SQL traffic goes over VPN or something) -- but this is a little long winded I think. There must be a simpler way.

  Read the article

• Can a network interface be configured to have a default gateway for UDP packets?

  - by Vaibhav

  It is quite possible that my question may not make a lot of sense. I apologize, but I am not a networking guy, and that's my excuse. To elaborate, WikiPedia defines "Default Gateway" as a node on a "TCP/IP" network. And the way it works is that if a network interface is sending a packet to an IP address not present on its subnet, it sends it out to the default gateway (which then knows what to do with that packet). Is this true if a UDP packet (datagram) is involved? I mean, if my network interface is sending a UDP packet to an IP address that is not present on its subnet, would it automatically send it to the Default Gateway as well?

  Read the article

• How to reduce the windows network browsing broadcast timeout or disable this function?

  - by Moi42

  Hello everyone. My residential network is make of 300 vlans (one per room). To browse them we are using a wins server. My problem is that when I try to browse the network, windows first tries to find the neighborhood using some broadcast, and only then does it query the wins server. This "broadcast period" lasts exactly 30 seconds and is very annoying. Can I reduce it, or can I completely disable this broadcast network discovery feature from my system? Thank you for your answers.

  Read the article

• Windows 7 Built-In VPN - How to access network shares, printers, etc.?

  - by mbrion

  After I have successfully connected to a Windows 7 box via the built-in VPN: how do I access shares, shared printers, network appliances, etc.? So, call me bad at googling, but: I can find dozens of articles on "How to Set up a VPN Connection" and "How to connect to a VPN" for Windows 7... but I can't find a single article on how to access resources after connecting. I have a home VPN set up in Windows 7; I was able to connect to it from my friend's Windows 7 machine last night. I expected to be able to UNC into my shares; I also expected to be able to go to "Start Computer" and Click "Network" on the left side, and then see all of the devices on my home network (while the VPN was connected). Am I missing something obvious? How do I make this happen?

  Read the article

• Windows 7 Built-In VPN - How to access network shares, printers, etc.?

  - by Mike Brion

  After I have successfully connected to a Windows 7 box via the built-in VPN: how do I access shares, shared printers, network appliances, etc.? So, call me bad at googling, but: I can find dozens of articles on "How to Set up a VPN Connection" and "How to connect to a VPN" for Windows 7... but I can't find a single article on how to access resources after connecting. I have a home VPN set up in Windows 7; I was able to connect to it from my friend's Windows 7 machine last night. I expected to be able to UNC into my shares; I also expected to be able to go to "Start Computer" and Click "Network" on the left side, and then see all of the devices on my home network (while the VPN was connected). Am I missing something obvious? How do I make this happen?

  Read the article

• Windows 7 Built-In VPN - How to access network shares, printers, etc.?

  - by mbrion

  After I have successfully connected to a Windows 7 box via the built-in VPN: how do I access shares, shared printers, network appliances, etc.? So, call me bad at googling, but: I can find dozens of articles on "How to Set up a VPN Connection" and "How to connect to a VPN" for Windows 7... but I can't find a single article on how to access resources after connecting. I have a home VPN set up in Windows 7; I was able to connect to it from my friend's Windows 7 machine last night. I expected to be able to UNC into my shares; I also expected to be able to go to "Start Computer" and Click "Network" on the left side, and then see all of the devices on my home network (while the VPN was connected). Am I missing something obvious? How do I make this happen?

  Read the article

• Why can't I access a webserver through a load balancer on my local network?

  - by Karptonite

  When I try to use curl (or wget, lynx, etc) to connect from a server on our local network to our website, which is on a local server behind a CoyotePoint load balancer, curl fails. Ping does not have this problem. When I curl directly to any of the servers behind that load balancer (from and to the same local network), I also have no problem. It doesn't matter whether the local server I'm curling from is behind the load balancer or not. Does anyone have any idea why I can't access my webserver through the load balancer on my local network?

  Read the article

• How do I turn a Wi-Fi "hotspot" into a local wired network?

  - by Max Schmeling

  Here's the situation: In a remote "office" I have a computer with no network connection, that I need to network with when I'm at this remote office. There is a wireless network where this computer is, but no wireless adapter in the computer. I have a laptop running Windows 7 that can connect to the wireless, and the computer is running Windows Vista. What is the best way to get them both connected? I know I can buy a USB wireless adapter or something for the computer, but is there an easy way to do it with what I've got?

  Read the article

• How can I prevent Windows 7 from automatically changing the firewall settings (turning it back on) when changing network location?

  - by YpeDeg

  By default, the firewall is turned on on all my workstations. I want to disable it. That works just fine. However, if Windows thinks there is a change in the Network Location, the "Set Network Location" dialog appears. At that point my Firewall is still disabled. When my users click on any of the three options "Work", "Home" or "Public", Windows immediately changes the firewall settings and turns it back on. Is it possible to stop Windows 7 from automatically turning the firewall back on when you change the Network Location? If yes, how could I perform this task?

  Read the article

• Nginx works on my linux machine but is not accessible from other computers in my local network

  - by crooveck

  In my LAN network I have a server with Scientific Linux (RedHat or Fedora based distro), I've done yum install nginx but the welcome page is not accessible from other computers in my network. When I do telnet open localhost 80 and then GET / HTTP/1.0 I get some html code from nginx, so it's running for sure. But when I want to connect remotly, doing telnet open 192.168.3.130 80 I get: Trying 192.168.3.130... telnet: Unable to connect to remote host: No route to host So I assume that there is something wrong with my network settings, maybe iptables or something else? Next step, I turned off iptables: service iptables stop and it helped, now I can connect remotely using telnet. So I think, I need to fix my iptables rules. I did some googling and found this rule -A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT but it still didn't allow me to connect remotely when iptables is up. Can someone please help me setting a proper iptables configuration?

  Read the article

• How do I automate the handling of a problem (no network device found) in Ubuntu 10.04 w/ preseed?

  - by user61183

  I have a preseed file that is doing some automation for an installation of Ubuntu 10.04. At the point where the network hardware is auto-detected, however, it fails to find hardware and displays a message, "No network interfaces detected". To make a long story short, I don't care if it can detect my network interface. How do I do one of the following: Skip that step alltogether. Handle the error page automagically. PS. I found somewhere where it suggested this: netcfg/no_interfaces seen true That didn't work. Thanks

  Read the article

• How does communication between 2 computers in a single network happen?

  - by learner

  Lets say I and my friend connect our computers with a LAN cable. I ping my friend with his IP address. How does it work? Since we are in the same network, we don't even need IP addresses, do we? Isn't IP addressing only relevant in case of inter-network communication? What will the ping command do with his IP address? How will it eventually find his physical address (NIC address)? (no ARP here, because that would involve a router at the edge of the network, which doesn't apply here). Am I wrong somewhere?

  Read the article

• How to access network shares, printers, etc.through Windows 7 Built-In VPN?

  - by mbrion

  After I have successfully connected to a Windows 7 box via the built-in VPN: how do I access shares, shared printers, network appliances, etc.? So, call me bad at googling, but: I can find dozens of articles on "How to Set up a VPN Connection" and "How to connect to a VPN" for Windows 7... but I can't find a single article on how to access resources after connecting. I have a home VPN set up in Windows 7; I was able to connect to it from my friend's Windows 7 machine last night. I expected to be able to UNC into my shares; I also expected to be able to go to "Start Computer" and Click "Network" on the left side, and then see all of the devices on my home network (while the VPN was connected). Am I missing something obvious? How do I make this happen?

  Read the article

• Windows 7,find who accessed my computer on network?

  - by pg2012

  It seems something tried to delete root c:/ folders on my computer and it did started delete process alphabetical order. Not sure what is cause. any known virus? We have company network edition of antivirus running, and full scan did not found any virus activity. That makes me suspious about someone on company network attempt to delete? can this possible? If it is how do we know from windows server that who accessed my computer over network?

  Read the article

• OSI Model

  - by kaleidoscope

  The Open System Interconnection Reference Model (OSI Reference Model or OSI Model) is an abstract description for layered communications and computer network protocol design. In its most basic form, it divides network architecture into seven layers which, from top to bottom, are the Application, Presentation, Session, Transport, Network, Data Link, and Physical Layers. It is therefore often referred to as the OSI Seven Layer Model. A layer is a collection of conceptually similar functions that provide services to the layer above it and receives service from the layer below it. Description of OSI layers: Layer 1: Physical Layer ·         Defines the electrical and physical specifications for devices. In particular, it defines the relationship between a device and a physical medium. ·         Establishment and termination of a connection to a communications medium. ·         Participation in the process whereby the communication resources are effectively shared among multiple users. ·         Modulation or conversion between the representation of digital data in user equipment and the corresponding signals transmitted over a communications channel. Layer 2: Data Link Layer ·         Provides the functional and procedural means to transfer data between network entities. ·         Detect and possibly correct errors that may occur in the Physical Layer. The error check is performed using Frame Check Sequence (FCS). ·         Addresses is then sought to see if it needs to process the rest of the frame itself or whether to pass it on to another host. ·         The Layer is divided into two sub layers: The Media Access Control (MAC) layer and the Logical Link Control (LLC) layer. ·         MAC sub layer controls how a computer on the network gains access to the data and permission to transmit it. ·         LLC layer controls frame synchronization, flow control and error checking.   Layer 3: Network Layer ·         Provides the functional and procedural means of transferring variable length data sequences from a source to a destination via one or more networks. ·         Performs network routing functions, and might also perform fragmentation and reassembly, and report delivery errors. ·         Network Layer Routers operate at this layer—sending data throughout the extended network and making the Internet possible.   Layer 4: Transport Layer ·         Provides transparent transfer of data between end users, providing reliable data transfer services to the upper layers. ·         Controls the reliability of a given link through flow control, segmentation/de-segmentation, and error control. ·         Transport Layer can keep track of the segments and retransmit those that fail. Layer 5: Session Layer ·         Controls the dialogues (connections) between computers. ·         Establishes, manages and terminates the connections between the local and remote application. ·         Provides for full-duplex, half-duplex, or simplex operation, and establishes checkpointing, adjournment, termination, and restart procedures. ·         Implemented explicitly in application environments that use remote procedure calls. Layer 6: Presentation Layer ·         Establishes a context between Application Layer entities, in which the higher-layer entities can use different syntax and semantics, as long as the presentation service understands both and the mapping between them. The presentation service data units are then encapsulated into Session Protocol data units, and moved down the stack. ·         Provides independence from differences in data representation (e.g., encryption) by translating from application to network format, and vice versa. The presentation layer works to transform data into the form that the application layer can accept. This layer formats and encrypts data to be sent across a network, providing freedom from compatibility problems. It is sometimes called the syntax layer. Layer 7: Application Layer ·         This layer interacts with software applications that implement a communicating component. ·         Identifies communication partners, determines resource availability, and synchronizes communication. o       When identifying communication partners, the application layer determines the identity and availability of communication partners for an application with data to transmit. o       When determining resource availability, the application layer must decide whether sufficient network or the requested communication exists. o       In synchronizing communication, all communication between applications requires cooperation that is managed by the application layer. Technorati Tags: Kunal,OSI,Networking

  Read the article

• Delivering SOA Governance with EAMS and Oracle Enterprise Repository by Link Consulting Team

  - by JuergenKress

  In the last 12 years Link Consulting has been making its presence in specific areas such as Governance and Architecture, both in terms of practices and methodologies, products, know-how and technological expertise. The Enterprise Architecture Management System - Oracle Enterprise Edition (EAMS - OER Edition) is the result of this experience and combines the architecture management solution with OER in order to deliver a product specialized for SOA Governance that gathers the better of two worlds in solution that enables SOA Governance projects, initiatives and programs. Enterprise Architecture Management System Enterprise Architecture Management System (EAMS), is an automation based solution that enables the efficient management of Enterprise Architectures. The solution uses configured enterprise repositories and takes advantages of its features to provide automation capabilities to the users. EAMS provides capabilities to create/customize/analyze repository data, architectural blueprints, reports and analytic charts. Oracle Enterprise Repository Oracle Enterprise Repository (OER) is one of the major and central elements of the Oracle SOA Governance solution. Oracle Enterprise Repository provides the tools to manage and govern the metadata for any type of software asset, from business processes and services to patterns, frameworks, applications, components, and models. OER maps the relationships and inter-dependencies that connect those assets to improve impact analysis, promote and optimize their reuse, and measure their impact on the bottom line. It provides the visibility, feedback, controls, and analytics to keep your SOA on track to deliver business value. The intense focus on automation helps to overcome barriers to SOA adoption and streamline governance throughout the lifecycle. Core capabilities of the OER include: Asset Management Asset Lifecycle Management Usage Tracking Service Discovery Version Management Dependency Analysis Portfolio Management EAMS - OER Edition The solution takes the advantages and features from both products and combines them in a symbiotic tool that enhances the quality of SOA Governance Initiatives and Programs. EAMS is able to produce a vast number of outputs by combining its analytical engine, SOA-specific configurations and the assets in OER and other related tools, catalogs and repositories. The configurations encompass not only the extendable parametrization of the metadata but also fully configurable blueprints, PowerPoint reports, charts and queries. The SOA blueprints The solution comes with a set of predefined architectural representations that help the organization better perceive their SOA landscape. More blueprints can be easily created in order to accommodate the organizations needs in terms of detail, audience and metadata. Charts & Dashboards The solution encompasses a set of predefined charts and dashboards that promote a more agile way to control and explore the assets. Time Based Visualization All representations are time bound, and with EAMS - OER you can truly govern SOA with a complete view of the Past, Present and Future; The solution delivers Gap Analysis, a project oriented approach while taking into consideration the As-Was, As-Is an To-Be. Time based visualization differentiating factors: Extensive automation and maintenance of architectural representations Organization wide solution. Easy access and navigation to and between all architectural artifacts and representations. Flexible meta-model, customization and extensibility capabilities. Lifecycle management and enforcement of the time dimension over all the repository content. Profile based customization. Comprehensive visibility Architectural alignment Friendly and striking user interfaces For more information on EAMS visit us here. For more information on SOA visit us here. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: Link Consulting,OER,OSR,SOA Governance,SOA Community,Oracle SOA,Oracle BPM,BPM Community,OPN,Jürgen Kress

  Read the article

• collectd does not work

  - by bery

  I have installed collectd-5.0.0 on Fedora12 server and would like to run its service for receiving data from clients. I have enabled network plugin and rddtool plugin as commented: collectd.conf in server: BaseDir "/opt/collectd/var/lib/collectd" LoadPlugin "logfile" LoadPlugin network LoadPlugin rrdtool <Plugin network> Listen "192.168.8.37" "25826" </Plugin> collectd.conf in client: LoadPlugin logfile LoadPlugin cpu LoadPlugin network LoadPlugin memory <Plugin network> Server"192.168.8.37" "25826" </Plugin> collectd.log in server: [2011-08-03 02:36:04] Exiting normally. [2011-08-03 02:36:04] rrdtool plugin: Shutting down the queue thread. [2011-08-03 02:36:04] network plugin: Stopping receive thread. [2011-08-03 02:36:04] network plugin: Stopping dispatch thread. [2011-08-03 02:37:11] Initialization complete, entering read-loop. collectd.log in client: [2011-08-02 17:31:44] Initialization complete, entering read-loop. results thst execute netstat on server: netstat -ulpn | grep 25826 udp 0 0 192.168.8.37:25826 0.0.0.0:* 4744/collectd problem: but there is noting in "/opt/collectd/var/lib/collectd/" on ser yes,I move the port number of "25826" as your propose(But I think this is the default port for coolectd).there is no rdd files recived on server. collectd.log in client collectd [2011-08-03 10:01:36] plugin_read_thread: Handling memory'. [2011-08-03 10:01:36] plugin_read_thread: Handlingcpu'. [2011-08-03 10:01:36] plugin_dispatch_values: time = 1312380096.431; interval = 10.000; host = uml; plugin = memory; plugin_instance = ; type = memory; type_instance = used; [2011-08-03 10:01:36] plugin_dispatch_values: time = 1312380096.431; interval = 10.000; host = uml; plugin = cpu; plugin_instance = 0; type = cpu; type_instance = user; [2011-08-03 10:01:36] uc_update: uml/memory/memory-used: ds[0] = 280412160.000000 [2011-08-03 10:01:36] plugin: plugin_write: Writing values via network. [2011-08-03 10:01:36] uc_update: uml/cpu-0/cpu-user: ds[0] = 0.100008 [2011-08-03 10:01:36] plugin: plugin_write: Writing values via network. [2011-08-03 10:01:36] plugin_dispatch_values: time = 1312380096.431; interval = 10.000; host = uml; plugin = memory; plugin_instance = ; type = memory; type_instance = buffered; [2011-08-03 10:01:36] plugin_dispatch_values: time = 1312380096.431; interval = 10.000; host = uml; plugin = cpu; plugin_instance = 0; type = cpu; type_instance = nice; [2011-08-03 10:01:36] uc_update: uml/memory/memory-buffered: ds[0] = 344182784.000000 [2011-08-03 10:01:36] plugin: plugin_write: Writing values via network. [2011-08-03 10:01:36] uc_update: uml/cpu-0/cpu-nice: ds[0] = 0.000000 [2011-08-03 10:01:36] plugin: plugin_write: Writing values via network. [2011-08-03 10:01:36] network plugin: flush_buffer: send_buffer_fill = 1340 [2011-08-03 10:01:36] network plugin: network_send_buffer: buffer_len = 1340 ... [2011-08-03 10:01:36] plugin_read_thread: Next read of the cpu plugin at 1312380106.429064774. collectd.log in server collectd: [2011-08-03 20:18:08] type = network [2011-08-03 20:18:08] type = rrdtool [2011-08-03 20:18:08] network plugin: sockent_open: node = 192.168.8.37; service = 25826; [2011-08-03 20:18:08] fd = 3; calling bind' [2011-08-03 20:18:08] Done parsing/opt/collectd//share/collectd/types.db' [2011-08-03 20:18:08] interval_g = 10; [2011-08-03 20:18:08] timeout_g = 2; [2011-08-03 20:18:08] hostname_g = localhost.localdomain; [2011-08-03 20:18:08] Initialization complete, entering read-loop. It looks like, data is sending but doesn't be recived. Where is the mistake?

  Read the article

• Connecting Linux to WatchGuard Firebox SSL (OpenVPN client)

  Recently, I got a new project assignment that requires to connect permanently to the customer's network through VPN. They are using a so-called SSL VPN. As I am using OpenVPN since more than 5 years within my company's network I was quite curious about their solution and how it would actually be different from OpenVPN. Well, short version: It is a disguised version of OpenVPN. Unfortunately, the company only offers a client for Windows and Mac OS which shouldn't bother any Linux user after all. OpenVPN is part of every recent distribution and can be activated in a couple of minutes - both client as well as server (if necessary). WatchGuard Firebox SSL - About dialog Borrowing some files from a Windows client installation Initially, I didn't know about the product, so therefore I went through the installation on Windows 8. No obstacles (and no restart despite installation of TAP device drivers!) here and the secured VPN channel was up and running in less than 2 minutes or so. Much appreciated from both parties - customer and me. Of course, this whole client package and my long year approved and stable installation ignited my interest to have a closer look at the WatchGuard client. Compared to the original OpenVPN client (okay, I have to admit this is years ago) this commercial product is smarter in terms of file locations during installation. You'll be able to access the configuration and key files below your roaming application data folder. To get there, simply enter '%AppData%\WatchGuard\Mobile VPN' in your Windows/File Explorer and confirm with Enter/Return. This will display the following files: Application folder below user profile with configuration and certificate files From there we are going to borrow four files, namely: ca.crt client.crt client.ovpn client.pem and transfer them to the Linux system. You might also be able to isolate those four files from a Mac OS client. Frankly, I'm just too lazy to run the WatchGuard client installation on a Mac mini only to find the folder location, and I'm going to describe why a little bit further down this article. I know that you can do that! Feedback in the comment section is appreciated. Configuration of OpenVPN (console) Depending on your distribution the following steps might be a little different but in general you should be able to get the important information from it. I'm going to describe the steps in Ubuntu 13.04 (Raring Ringtail). As usual, there are two possibilities to achieve your goal: console and UI. Let's what it is necessary to be done. First of all, you should ensure that you have OpenVPN installed on your system. Open your favourite terminal application and run the following statement: $ sudo apt-get install openvpn network-manager-openvpn network-manager-openvpn-gnome Just to be on the safe side. The four above mentioned files from your Windows machine could be copied anywhere but either you place them below your own user directory or you put them (as root) below the default directory: /etc/openvpn At this stage you would be able to do a test run already. Just in case, run the following command and check the output (it's the similar information you would get from the 'View Logs...' context menu entry in Windows: $ sudo openvpn --config client.ovpn Pay attention to the correct path to your configuration and certificate files. OpenVPN will ask you to enter your Auth Username and Auth Password in order to establish the VPN connection, same as the Windows client. Remote server and user authentication to establish the VPN Please complete the test run and see whether all went well. You can disconnect pressing Ctrl+C. Simplifying your life - authentication file In my case, I actually set up the OpenVPN client on my gateway/router. This establishes a VPN channel between my network and my client's network and allows me to switch machines easily without having the necessity to install the WatchGuard client on each and every machine. That's also very handy for my various virtualised Windows machines. Anyway, as the client configuration, key and certificate files are located on a headless system somewhere under the roof, it is mandatory to have an automatic connection to the remote site. For that you should first change the file extension '.ovpn' to '.conf' which is the default extension on Linux systems for OpenVPN, and then open the client configuration file in order to extend an existing line. $ sudo mv client.ovpn client.conf $ sudo nano client.conf You should have a similar content to this one here: dev tunclientproto tcp-clientca ca.crtcert client.crtkey client.pemtls-remote "/O=WatchGuard_Technologies/OU=Fireware/CN=Fireware_SSLVPN_Server"remote-cert-eku "TLS Web Server Authentication"remote 1.2.3.4 443persist-keypersist-tunverb 3mute 20keepalive 10 60cipher AES-256-CBCauth SHA1float 1reneg-sec 3660nobindmute-replay-warningsauth-user-pass auth.txt Note: I changed the IP address of the remote directive above (which should be obvious, right?). Anyway, the required change is marked in red and we have to create a new authentication file 'auth.txt'. You can give the directive 'auth-user-pass' any file name you'd like to. Due to my existing OpenVPN infrastructure my setup differs completely from the above written content but for sake of simplicity I just keep it 'as-is'. Okay, let's create this file 'auth.txt' $ sudo nano auth.txt and just put two lines of information in it - username on the first, and password on the second line, like so: myvpnusernameverysecretpassword Store the file, change permissions, and call openvpn with your configuration file again: $ sudo chmod 0600 auth.txt $ sudo openvpn --config client.conf This should now work without being prompted to enter username and password. In case that you placed your files below the system-wide location /etc/openvpn you can operate your VPNs also via service command like so: $ sudo service openvpn start client $ sudo service openvpn stop client Using Network Manager For newer Linux users or the ones with 'console-phobia' I'm going to describe now how to use Network Manager to setup the OpenVPN client. For this move your mouse to the systray area and click on Network Connections => VPN Connections => Configure VPNs... which opens your Network Connections dialog. Alternatively, use the HUD and enter 'Network Connections'. Network connections overview in Ubuntu Click on 'Add' button. On the next dialog select 'Import a saved VPN configuration...' from the dropdown list and click on 'Create...' Choose connection type to import VPN configuration Now you navigate to your folder where you put the client files from the Windows system and you open the 'client.ovpn' file. Next, on the tab 'VPN' proceed with the following steps (directives from the configuration file are referred): General Check the IP address of Gateway ('remote' - we used 1.2.3.4 in this setup) Authentication Change Type to 'Password with Certificates (TLS)' ('auth-pass-user') Enter User name to access your client keys (Auth Name: myvpnusername) Enter Password (Auth Password: verysecretpassword) and choose your password handling Browse for your User Certificate ('cert' - should be pre-selected with client.crt) Browse for your CA Certificate ('ca' - should be filled as ca.crt) Specify your Private Key ('key' - here: client.pem) Then click on the 'Advanced...' button and check the following values: Use custom gateway port: 443 (second value of 'remote' directive) Check the selected value of Cipher ('cipher') Check HMAC Authentication ('auth') Enter the Subject Match: /O=WatchGuard_Technologies/OU=Fireware/CN=Fireware_SSLVPN_Server ('tls-remote') Finally, you have to confirm and close all dialogs. You should be able to establish your OpenVPN-WatchGuard connection via Network Manager. For that, click on the 'VPN Connections => client' entry on your Network Manager in the systray. It is advised that you keep an eye on the syslog to see whether there are any problematic issues that would require some additional attention. Advanced topic: routing As stated above, I'm running the 'WatchGuard client for Linux' on my head-less server, and since then I'm actually establishing a secure communication channel between two networks. In order to enable your network clients to get access to machines on the remote side there are two possibilities to enable that: Proper routing on both sides of the connection which enables both-direction access, or Network masquerading on the 'client side' of the connection Following, I'm going to describe the second option a little bit more in detail. The Linux system that I'm using is already configured as a gateway to the internet. I won't explain the necessary steps to do that, and will only focus on the additional tweaks I had to do. You can find tons of very good instructions and tutorials on 'How to setup a Linux gateway/router' - just use Google. OK, back to the actual modifications. First, we need to have some information about the network topology and IP address range used on the 'other' side. We can get this very easily from /var/log/syslog after we established the OpenVPN channel, like so: $ sudo tail -n20 /var/log/syslog Or if your system is quite busy with logging, like so: $ sudo less /var/log/syslog | grep ovpn The output should contain PUSH received message similar to the following one: Jul 23 23:13:28 ios1 ovpn-client[789]: PUSH: Received control message: 'PUSH_REPLY,topology subnet,route 192.168.1.0 255.255.255.0,dhcp-option DOMAIN ,route-gateway 192.168.6.1,topology subnet,ping 10,ping-restart 60,ifconfig 192.168.6.2 255.255.255.0' The interesting part for us is the route command which I highlighted already in the sample PUSH_REPLY. Depending on your remote server there might be multiple networks defined (172.16.x.x and/or 10.x.x.x). Important: The IP address range on both sides of the connection has to be different, otherwise you will have to shuffle IPs or increase your the netmask. {loadposition content_adsense} After the VPN connection is established, we have to extend the rules for iptables in order to route and masquerade IP packets properly. I created a shell script to take care of those steps: #!/bin/sh -eIPTABLES=/sbin/iptablesDEV_LAN=eth0DEV_VPNS=tun+VPN=192.168.1.0/24 $IPTABLES -A FORWARD -i $DEV_LAN -o $DEV_VPNS -d $VPN -j ACCEPT$IPTABLES -A FORWARD -i $DEV_VPNS -o $DEV_LAN -s $VPN -j ACCEPT$IPTABLES -t nat -A POSTROUTING -o $DEV_VPNS -d $VPN -j MASQUERADE I'm using the wildcard interface 'tun+' because I have multiple client configurations for OpenVPN on my server. In your case, it might be sufficient to specify device 'tun0' only. Simplifying your life - automatic connect on boot Now, that the client connection works flawless, configuration of routing and iptables is okay, we might consider to add another 'laziness' factor into our setup. Due to kernel updates or other circumstances it might be necessary to reboot your system. Wouldn't it be nice that the VPN connections are established during the boot procedure? Yes, of course it would be. To achieve this, we have to configure OpenVPN to automatically start our VPNs via init script. Let's have a look at the responsible 'default' file and adjust the settings accordingly. $ sudo nano /etc/default/openvpn Which should have a similar content to this: # This is the configuration file for /etc/init.d/openvpn## Start only these VPNs automatically via init script.# Allowed values are "all", "none" or space separated list of# names of the VPNs. If empty, "all" is assumed.# The VPN name refers to the VPN configutation file name.# i.e. "home" would be /etc/openvpn/home.conf#AUTOSTART="all"#AUTOSTART="none"#AUTOSTART="home office"## ... more information which remains unmodified ... With the OpenVPN client configuration as described above you would either set AUTOSTART to "all" or to "client" to enable automatic start of your VPN(s) during boot. You should also take care that your iptables commands are executed after the link has been established, too. You can easily test this configuration without reboot, like so: $ sudo service openvpn restart Enjoy stable VPN connections between your Linux system(s) and a WatchGuard Firebox SSL remote server. Cheers, JoKi

  Read the article

• OpenIndiana (illumos): vmxnet3 interface lost on reboot

  - by protomouse

  I want my VMware vmxnet3 interface to be brought up with DHCP on boot. I can manually configure the NIC with: # ifconfig vmxnet3s0 plumb # ipadm create-addr -T dhcp vmxnet3s0/v4dhcp But after creating /etc/dhcp.vmxnet3s0 and rebooting, the interface is down and the logs show: Aug 13 09:34:15 neumann vmxnet3s: [ID 654879 kern.notice] vmxnet3s:0: getcapab(0x200000) -> no Aug 13 09:34:15 neumann vmxnet3s: [ID 715698 kern.notice] vmxnet3s:0: stop() Aug 13 09:34:17 neumann vmxnet3s: [ID 654879 kern.notice] vmxnet3s:0: getcapab(0x200000) -> no Aug 13 09:34:17 neumann vmxnet3s: [ID 920500 kern.notice] vmxnet3s:0: start() Aug 13 09:34:17 neumann vmxnet3s: [ID 778983 kern.notice] vmxnet3s:0: getprop(TxRingSize) -> 256 Aug 13 09:34:17 neumann vmxnet3s: [ID 778983 kern.notice] vmxnet3s:0: getprop(RxRingSize) -> 256 Aug 13 09:34:17 neumann vmxnet3s: [ID 778983 kern.notice] vmxnet3s:0: getprop(RxBufPoolLimit) -> 512 Aug 13 09:34:17 neumann nwamd[491]: [ID 605049 daemon.error] 1: nwamd_set_unset_link_properties: dladm_set_linkprop failed: operation not supported Aug 13 09:34:17 neumann vmxnet3s: [ID 654879 kern.notice] vmxnet3s:0: getcapab(0x20000) -> no Aug 13 09:34:17 neumann nwamd[491]: [ID 751932 daemon.error] 1: nwamd_down_interface: ipadm_delete_addr failed on vmxnet3s0: Object not found Aug 13 09:34:17 neumann nwamd[491]: [ID 819019 daemon.error] 1: nwamd_plumb_unplumb_interface: plumb IPv4 failed for vmxnet3s0: Operation not supported on disabled object Aug 13 09:34:17 neumann nwamd[491]: [ID 160156 daemon.error] 1: nwamd_plumb_unplumb_interface: plumb IPv6 failed for vmxnet3s0: Operation not supported on disabled object Aug 13 09:34:17 neumann nwamd[491]: [ID 771489 daemon.error] 1: add_ip_address: ipadm_create_addr failed on vmxnet3s0: Operation not supported on disabled object Aug 13 09:34:17 neumann nwamd[491]: [ID 405346 daemon.error] 9: start_dhcp: ipadm_create_addr failed for vmxnet3s0: Operation not supported on disabled object I then tried disabling network/physical:nwam in favour of network/physical:default. This works, the interface is brought up but physical:default fails and my network services (e.g. NFS) refuse to start. # ifconfig -a lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 vmxnet3s0: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:1: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:2: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:3: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:4: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:5: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:6: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:7: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:8: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1 inet6 ::1/128 vmxnet3s0: flags=20002000840<RUNNING,MULTICAST,IPv6> mtu 9000 index 2 inet6 ::/0 # cat /var/svc/log/network-physical\:default.log [ Aug 16 09:46:39 Enabled. ] [ Aug 16 09:46:41 Executing start method ("/lib/svc/method/net-physical"). ] [ Aug 16 09:46:41 Timeout override by svc.startd. Using infinite timeout. ] starting DHCP on primary interface vmxnet3s0 ifconfig: vmxnet3s0: DHCP is already running [ Aug 16 09:46:43 Method "start" exited with status 96. ] NFS server not running: # svcs -xv network/nfs/server svc:/network/nfs/server:default (NFS server) State: offline since August 16, 2012 09:46:40 AM UTC Reason: Service svc:/network/physical:default is not running because a method failed. See: http://illumos.org/msg/SMF-8000-GE Path: svc:/network/nfs/server:default svc:/milestone/network:default svc:/network/physical:default Reason: Service svc:/network/physical:nwam is disabled. See: http://illumos.org/msg/SMF-8000-GE Path: svc:/network/nfs/server:default svc:/milestone/network:default svc:/network/physical:nwam Reason: Service svc:/network/nfs/nlockmgr:default is disabled. See: http://illumos.org/msg/SMF-8000-GE Path: svc:/network/nfs/server:default svc:/network/nfs/nlockmgr:default See: man -M /usr/share/man -s 1M nfsd Impact: This service is not running. I'm new to the world of Solaris, so any help solving would be much appreciated. Thanks!

  Read the article

• How to set foreground Window from Powershell event subscriber action

  - by guillermooo

  I have a FileSystemWatcher instance running in the background of my PoSh session watching for changes to text files. A PoSh event subscriber is attached to this event and, when fired, it launches a console program by calling Start-Process. This program steals de focus from the current foreground window (my PoSh console). Calling SetForegroundWindow from the PoSh event subscriber to return the focus to my PoSh console doesn't work. SwitchToThisWindow does work most of the time, but according to the MSDN docs, it shoulnd't be used. Can I prevent Start-Process from stealing the focus in this situation or set it back from the event subscriber to the window that had it before this event is fired?

  Read the article

• DirectoryServicesCOMException when working with System.DirectoryServices.AccountManagement

  - by antik

  I'm attempting to determine whether a user is a member of a given group using System.DirectoryServices.AccountManagment. I'm doing this inside a SharePoint WebPart in SharePoint 2007 on a 64-bit system. Project targets .NET 3.5 Impersonation is enabled in the web.config. The IIS Site in question is using an IIS App Pool with a domain user configured as the identity. I am able to instantiate a PrincipalContext as such: PrincipalContext pc = new PrincipalContext(ContextType.Domain) Next, I try to grab a principal: using (PrincipalContext pc = new PrincipalContext(ContextType.Domain)) { GroupPrincipal group = GroupPrincipal.FindByIdentity(pc, "MYDOMAIN\somegroup"); // snip: exception thrown by line above. } Both the above and UserPrincipal.FindByIdentity with a user SAM throw a DirectoryServicesCOMException: "Logon failure: Unknown user name or bad password" I've tried passing in a complete SAMAccountName to either FindByIdentity (in the form of MYDOMAIN\username) or just the username with no change in behavior. I've tried executing the code with other credentials using both the HostingEnvironment.Impersonate and SPSecurity.RunWithElevatedPrivileges approaches and also experience the same result. I've also tried instantiating my context with the domain name in place: Principal Context pc = new PrincipalContext(ContextType.Domain, "MYDOMAIN"); This throws a PrincipalServerDownException: "The server could not be contacted." I'm working on a reasonably hardened server. I did not lock the system down so I am unsure exactly what has been done to it. If there are credentials I need to allocate to my pool identity's user or in the domain security policy in order for these to work, I can configure the domain accordingly. Are there any settings that would be preventing my code from running? Am I missing something in the code itself? Is this just not possible in a SharePoint web? EDIT: Given further testing, my code functions correctly when tested in a Console application targeting .NET 4.0. I targeted a different framework because I didn't have AccountManagement available to me in the console app when targeting .NET 3.5 for some reason. using (PrincipalContext pc = new PrincipalContext(ContextType.Domain)) using (UserPrincipal adUser = UserPrincipal.FindByIdentity(pc, "MYDOMAIN\joe.user")) using (GroupPrincipal adGroup = GroupPrincipal.FindByIdentity(pc, "MYDOMAIN\user group")) { if (adUser.IsMemberOf(adGroup)) { Console.WriteLine("User is a member!"); } else { Console.WriteLine("User is NOT a member."); } } What varies in my SharePoint environment that might prohibit this function from executing?

  Read the article

• -[UIImage drawInRect:] / CGContextDrawImage() not releasing memory?

  - by sohocoke

  I wanted to easily blend a UIImage on top of another background image, so wrote a category method for UIImage, adapted from http://stackoverflow.com/questions/1309757/blend-two-uiimages : - (UIImage *) blendedImageOn:(UIImage *) backgroundImage { NSAutoreleasePool* pool = [[NSAutoreleasePool alloc] init]; UIGraphicsBeginImageContext(backgroundImage.size); CGRect rect = CGRectMake(0, 0, backgroundImage.size.width, backgroundImage.size.height); [backgroundImage drawInRect:rect]; [self drawInRect:rect]; UIImage* blendedImage = UIGraphicsGetImageFromCurrentImageContext(); UIGraphicsEndImageContext(); [pool release]; return blendedImage; } Unfortunately my app that uses the above method to load around 20 images and blend them with background and gloss images (so probably around 40 calls), is being jettisoned on the device. An Instruments session revealed that calls to malloc stemming from the calls to drawInRect: are responsible for the bulk of the memory usage. I tried replacing the drawInRect: messages with equivalent function calls to the function CGContextDrawImage but it didn't help. The AutoReleasePool was added after I found the memory usage problem; it also didn't make a difference. I'm thinking this is probably because I'm not using graphics contexts appropriately. Would calling the above method in a loop be a bad idea because of the number of contexts I create? Or did I simply miss something?

  Read the article

• Mike Cohn-style burndown charts in JIRA

  - by Fuzzy Purple Monkey

  We use Jira/Greenhopper for our project planning/tracking. The built-in graphs are great, but when a new issue/story is added during a project, the whole burn-down graph moves up rather than increasing the part of the graph when the issue was added. Ideally I'd like to generate a Mike Cohn-style burndown graph, which shows a hump when new issues are added. Does anyone know of any plugins that support this, or been able to extract this data directly from the database?

  Read the article

• Database Memory :: MySql Innodb how much storage memory allocation for empty field vs not empty fie

  - by Yosef

  Hi, I new in database, and dont know how and when mysql allocate memory space. In MySql Innodb how much storage memory allocation for empty field (no string inserted) vs not empty field? Other form of my question: When memory allocated space In MySql Innodb for varchar/text field in time of table creation or when data inserted inside field? Thank you, Yosef

  Read the article

• Extending GroupPrincipal and Members property

  - by Paolo Tedesco

  I want to extend the GroupPrincipal class to handle some custom properties: using System.DirectoryServices.AccountManagement; [DirectoryRdnPrefix("CN")] [DirectoryObjectClass("group")] public class MyGroupPrincipal : GroupPrincipal { // ... } How could I override the Members property for MyGroupPrincipal so that if it has a member that is a group an instance of MyGroupPrincipal and not of GroupPrincipal is returned? I would like to write e.g. MyGroupPrincipal group = GetGroup(); foreach (var m in group.Members) { if (m is MyGroupPrincipal) { // always fails: m is a normal GroupPrincipal // do something } }

  Read the article

< Previous Page | 306 307 308 309 310 311 312 313 314 315 316 317  | Next Page >