Search Results

Search found 9338 results on 374 pages for 'fedora 15'.

Page 311/374 | < Previous Page | 307 308 309 310 311 312 313 314 315 316 317 318  | Next Page >

• boot issues - long delay, then "gave up waiting for root device"

  - by chazomaticus

  I've had this issue on and off for about two years now. I noticed it on a new (custom built) machine running 10.04 when that first came out, but then it went away until a few months ago. I've gone through a number of hard drive changes but I can't say specifically what if anything I changed hardware-wise to make it stop or start happening. I had assumed upgrading to a modern Ubuntu version would fix the issue, so I installed 12.04 beta on a spare partition last night, but it's still happening. Here's the issue. After grub loads and I select a kernel to boot, the screen goes blank save for a blinking cursor. It sits in this state for many long minutes before it finally gives up and gives me an initramfs shell with the message gave up waiting for root device (and lists the /dev/disk/by-uuid/... path it was waiting for) but no other specific diagnostic information. Now, here's the tricky part. For one, the problem is intermittent - sometimes it progresses from the blinking cursor to the Ubuntu splash boot screen in a few seconds, and once it gets that far it always continues booting fine. The really bizarre thing is that I can "force" it to "find" the root device by repeatedly pressing the space bar and hitting the machine's power button. If I tap those enough, eventually I will notice the hard drive light coming on, at which point it will always continue the boot process after a few seconds. Interestingly, if I wait slightly too long before pressing the power button (30s?), as soon as I press it I get the gave up waiting message and the initramfs shell. I've tried setting up /etc/fstab (and the grub menu.lst or whatever it's called nowadays) to use device names (e.g. /dev/sda1) instead of UUIDs, but I get the same effect just with the device name, not UUID, in the error message. I should also mention that when I boot to Windows 7, there is no issue. It boots slowly all the time just by virtue of being Windows, but it never hangs indefinitely. This would seem to indicate it's a problem in Ubuntu, not the hardware. It's pretty annoying to have to babysit the computer every time it boots. Any ideas? I'm at a loss. Not even sure how to diagnose the issue. Thanks! EDIT: Here's some dmesg output from 10.04. The 15 second gap is where it was doing nothing. I pressed the power button and space bar a few times, and the stuff at 16 seconds happened. Not sure what any of it means. [ 1.320250] scsi18 : ahci [ 1.320294] scsi19 : ahci [ 1.320320] ata19: SATA max UDMA/133 abar m8192@0xfd4fe000 port 0xfd4fe100 ir q 18 [ 1.320323] ata20: SATA max UDMA/133 abar m8192@0xfd4fe000 port 0xfd4fe180 ir q 18 [ 1.403886] usb 2-4: new high speed USB device using ehci_hcd and address 4 [ 1.562558] usb 2-4: configuration #1 chosen from 1 choice [ 16.477824] ata16: SATA link down (SStatus 0 SControl 300) [ 16.477843] ata19: SATA link down (SStatus 0 SControl 300) [ 16.477857] ata3: SATA link down (SStatus 0 SControl 300) [ 16.477895] ata15: SATA link down (SStatus 0 SControl 300) [ 16.477906] ata20: SATA link down (SStatus 0 SControl 300) [ 16.477977] ata17: SATA link down (SStatus 0 SControl 300) [ 16.478003] ata12: SATA link down (SStatus 0 SControl 300) [ 16.478046] ata13: SATA link down (SStatus 0 SControl 300) [ 16.478063] ata14: SATA link down (SStatus 0 SControl 300) [ 16.478108] ata11: SATA link down (SStatus 0 SControl 300) [ 16.478123] ata18: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 16.478127] ata6: SATA link down (SStatus 0 SControl 300) [ 16.478157] ata5: SATA link down (SStatus 0 SControl 300) [ 16.478193] ata18.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 After that, it took its sweet time, and I had to keep hitting space bar to coax it along. Here's some more dmesg output from a little later in the boot process: [ 17.982291] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00 :13.0/usb5/5-2/5-2:1.0/input/input4 [ 17.982335] generic-usb 0003:046E:5506.0002: input,hidraw1: USB HID v1.10 Key board [BTC USB Multimedia Keyboard] on usb-0000:00:13.0-2/input0 [ 18.005211] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00 :13.0/usb5/5-2/5-2:1.1/input/input5 [ 18.005274] generic-usb 0003:046E:5506.0003: input,hiddev96,hidraw2: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:13.0-2/input1 [ 22.484906] EXT4-fs (sda6): INFO: recovery required on readonly filesystem [ 22.484910] EXT4-fs (sda6): write access will be enabled during recovery [ 22.548542] EXT4-fs (sda6): recovery complete [ 22.549074] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 32.516772] Adding 20482832k swap on /dev/sda5. Priority:-1 extents:1 across:20482832k [ 32.742540] udev: starting version 151 [ 33.002004] Bluetooth: Atheros AR30xx firmware driver ver 1.0 [ 33.008135] parport_pc 00:09: reported by Plug and Play ACPI [ 33.008186] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 33.012076] lp: driver loaded but no devices found [ 33.037271] ppdev: user-space parallel port driver [ 33.090256] lp0: using parport0 (interrupt-driven). Any clues in there?

  Read the article

• Embedded Spark 2010 Summer Challenge

  - by Valter Minute

  If you have a good idea for a cool embedded device based on Windows Embedded 7 and some free time to work on it you can partecipate to the Embedded Spark 2010 Summer Challenge. Just submit a short paper describing your idea and, if your idea is one of the 75 selected by the judges, you’ll receive some hardware to put your idea in practice and a chance to attend ESC Boston for free and win 15.000 dollars. The latest challenge has been won by Marco Bodoira, a fellow Italian embedded developer, so I hope to see many Italian developers (and non developers) presenting their ideas and project for this new challenge! You can find rules, ideas, forums and all the information you need at the challenge web site: http://www.embeddedspark.com/

  Read the article

• Is Cygwin or Windows Command Prompt preferable for getting a consistent terminal experience for development?

  - by Paul Hazen

  The question: Which is better, installing cygwin or one of its cousins on all my windows machines to have a consistent terminal experience across all my development machines, or becoming well trained in the skill of mentally switching from linux terminal to windows command prompt? Systems I use: OSX Lion on a Macbook Air Windows 8 on a desktop Windows 7 on the same desktop Fedora 16 on the same desktop What I'm trying to accomplish Configure an entirely consistent (or consistent enough) terminal experience across all my machines. "enough" in this context is clearly subjective. Please be clear in your answer why the configuration you suggest is consistent enough. One more thing to keep in mind: While I do write a lot of code intended to run on Windows (actually code that runs on Windows Phone which necessitates a windows machine), I also write a lot of Java code, and prefer to do so in vim. I test a local repo in Java on my windows machine, and push to another test machine running ubuntu later in the development stage. When I push to the ubuntu machine, I'm exclusively in terminal, since I'm accessing it via SSH. Summary, with more accurate question: Is there a good way to accomplish what I'm trying to do, or is it better to get accustomed to remembering different commands based on the system I'm on? Which (if either) is considered "best practice" by the development community? Alternatively, for a consistent development experience, would it be better to write all my code SSHed into another machine, and move things to windows for compile / build only when I needed to? That seems like too much work... but could be a solution. Update: While there are insightful responses below, I have yet to hear an answer that talks about why any given solution is superior. Cygwin/GnuWin32 is certainly a way to accomplish a similar experience on all platforms, but since I'm just learning all things command line, I don't want to set myself up to do a lot of relearning/unlearning in the future. Cygwin/GnuWin32 has its peculiarities I would imagine, and being aware of how that set up works on Windows is a learning curve. Additionally, using Cygwin/GnuWin32 robs me of learning the benefits of PowerShell. As a newcomer to working in a command line, which path should I choose to minimize having to relearn/unlearn things in the future? or as my first paragraph poses: [is it better to use Cygwin] ...or [become] well trained in the skill of mentally switching from linux terminal to windows command prompt?

  Read the article

• Top Questions and Answers for Pluging into Oracle Database as a Service

  - by David Swanger

  Yesterday we hosted a comprehensive online forum that shared a comprehensive path to help your organization design, deploy, and deliver a Database as a Service cloud. If you missed the online forum, you can watch it on demand by registering here. We received numerous questions.  Below are highlights of the most informative: DBaaS requires a lengthy and careful design efforts. What is the minimum requirements of setting up a scaled-down environment and test it out? You should have an OEM 12c environment for DBaaS administration and then a target database deployment platform that has the key characteristics of what your production environment will look like. This could be a single server or it could be a small pool of hosts if your production DBaaS will be larger and you want to test a more robust / real world configuration with Zones and Pools or DR capabilities for example. How does this benefit companies having their own data center? This allows companies to transform their internal IT to a service delivery model for the database. The benefits to the company are significant cost savings, improved business agility and reduced risk. The benefits to the consumers (internal) of services if much fast provisioning, and response to change in business requirements. From a deployment perspective, is DBaaS's job solely DBA's job? The best deployment model enables the DBA (or end-user) to control the entire process. All resources required to deploy the service are pre-provisioned, and there are no external dependencies (on network, storage, sysadmins teams). The service is created either via a self-service portal or by the DBA. The purpose of self service seems to be that the end user does not rely on the DBA. I just need to give him a template. He decides how much AMM he needs. Why shall I set it one by one. That doesn't seem to be the purpose of self service. Most customers we have worked with define a standardized service catalog, with a few (2 to 5) different classes of service. For each of these classes, there is a pre-defined deployment template, and the user has the ability to select from some pre-defined service sizes. The administrator only has to create this catalog once. Each user then simply selects from the options offered in the catalog.  Looking at DBaaS service definition, it seems to be no different from a service definition provided by a well defined DBA team. Why do you attribute it to DBaaS? There are a couple of perspectives. First, some organizations might already be operating with a high level of standardization and a higher level of maturity from an ITIL or Service Management perspective. Their journey to DBaaS could be shorter and their Service Definition will evolve less but they still might need to add capabilities such as Self Service and Metering/Chargeback. Other organizations are still operating in highly siloed environments with little automation and their formal Service Definition (if they have one) will be a lot less mature today. Therefore their future state DBaaS will look a lot different from their current state, as will their Service Definition. How database as a service impact or help with "Click to Compute" or deploying "Database in cloud infrastructure" DBaaS enables Click to Compute. Oracle DBaaS can be implemented using three architecture models: Oracle Multitenant 12c, native consolidation using Oracle Database and consolidation using virtualization in infrastructure cloud. As Deploy session showed, you get higher consolidating density and efficiency using Multitenant and higher isolation using infrastructure cloud. Depending upon your business needs, DBaaS can be implemented using any of these models. How exactly is the DBaaS different from the traditional db? Storage/OS/DB all together to 'transparently' provide service to applications? Will there be across-databases access by application/user. Some key differences are: 1) The services run on a shared platform. 2) The services can be rapidly provisioned (< 15 minutes). 3) The services are dynamic and can be relocated, grown, shrunk as needed to meet business needs without disruption and rapidly. 4) The user is able to provision the services directly from a standardized service catalog.. With 24x7x365 databases its difficult to find off peak hrs to do basic admin tasks such as gathering stats, running backups, batch jobs. How does pluggable database handle this and different needs/patching downtime of apps databases might be serving? You can gather stats in Oracle Multitenant the same way you had been in regular databases. Regarding patching/upgrading, Oracle Multitenant makes patch/upgrade very efficient in that you can pre-provision a new version/patched multitenant db in a different ORACLE_HOME and then unplug a PDB from its CDB and plug it into the newer/patched CDB in seconds.  Thanks for all the great questions!  If you'd like to learn more and missed the online forum, you can watch it on demand here.

  Read the article

• How can I set my screen resolution to match my TV?

  - by Scott Severance

  I have a computer in my classroom that's connected to an LG smart TV (that's actually not so smart. I wouldn't recommend buying one.). For the touch interface, the TV wants a resolution of 1920x1080 at 60Hz. However, I can't seem to set the computer to that resolution. The display settings only offer 1024x768 and 640x480. The computer dual boots with Windows XP, where widescreen options are available in approximately the required size, but the exact resolution -- or even aspect ratio-- isn't available in XP either. I tried the following command: xrandr -s 1920x1080 -r 60 The response was: Size 1920x1080 not found in available modes Back in the old days, the solution would be to edit xorg.conf. However, since that file no longer exists, and I haven't found up-to-date info, I don't know what else to do. If it helps, this machine will never be connected to a different display, so resolution flexibility isn't important. Here's the output of lshw: *-display:0 description: VGA compatible controller product: 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 03 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:42 memory:fe800000-febfffff memory:d0000000-dfffffff ioport:ecd8(size=8) *-display:1 UNCLAIMED description: Display controller product: 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 03 width: 64 bits clock: 33MHz According to the system settings, my graphics driver is unknown and my "experience" is standard. This is 64-bit Ubuntu 12.04 (Precise) Note: There are a number of similar questions to this one, but they didn't include any answers that helped me. Update After posting this question, I noticed one in the sidebar that I hadn't found through search but which appeared to contain the answer. Based on that question, I created the /etc/X11/xorg.conf file below: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "dbe" Load "dri" Load "record" Load "extmod" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "LG" ModelName "Smart TV" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "DRI" # [<bool>] #Option "ColorKey" # <i> #Option "VideoKey" # <i> #Option "FallbackDebug" # [<bool>] #Option "Tiling" # [<bool>] #Option "LinearFramebuffer" # [<bool>] #Option "Shadow" # [<bool>] #Option "SwapbuffersWait" # [<bool>] #Option "TripleBuffer" # [<bool>] #Option "XvMC" # [<bool>] #Option "XvPreferOverlay" # [<bool>] #Option "DebugFlushBatches" # [<bool>] #Option "DebugFlushCaches" # [<bool>] #Option "DebugWait" # [<bool>] #Option "HotPlug" # [<bool>] #Option "RelaxedFencing" # [<bool>] Identifier "Card0" Driver "intel" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 #SubSection "Display" # Viewport 0 0 # Depth 1 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 4 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 8 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 15 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 16 #EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" "1920x1080" EndSubSection EndSection According to /var/log/Xorg.0.log, my settings aren't being applied. In fact, I wonder if the config file is even being read. [ 1209.083] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 1209.084] (==) intel(0): RGB weight 888 [ 1209.084] (==) intel(0): Default visual is TrueColor [ 1209.084] (II) intel(0): Integrated Graphics Chipset: Intel(R) G41 [ 1209.084] (--) intel(0): Chipset: "G41" [ 1209.084] (**) intel(0): Relaxed fencing enabled [ 1209.084] (**) intel(0): Wait on SwapBuffers? enabled [ 1209.084] (**) intel(0): Triple buffering? enabled [ 1209.084] (**) intel(0): Framebuffer tiled [ 1209.084] (**) intel(0): Pixmaps tiled [ 1209.084] (**) intel(0): 3D buffers tiled [ 1209.084] (**) intel(0): SwapBuffers wait enabled [ 1209.084] (==) intel(0): video overlay key set to 0x101fe [ 1209.172] (II) intel(0): Output VGA1 using monitor section Monitor0 [ 1209.260] (II) intel(0): EDID for output VGA1 [ 1209.260] (II) intel(0): Printing probed modes for output VGA1 [ 1209.260] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 1209.260] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 1209.260] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 1209.260] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz) [ 1209.260] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz) [ 1209.260] (II) intel(0): Output VGA1 connected [ 1209.260] (II) intel(0): Using user preference for initial modes [ 1209.260] (II) intel(0): Output VGA1 using initial mode 1024x768 [ 1209.260] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 1209.260] (II) intel(0): Kernel page flipping support detected, enabling [ 1209.260] (==) intel(0): DPI set to (96, 96)

  Read the article

• To refund or not to refund this client?

  - by Mahalia Samuels

  I'd really appreciate your advice on an ongoing project. I presented my client with a proposal and design samples which he approved, and he paid in full instead of the 50% upfront deposit as I'd given him a generous discount. He was then slow in furnishing me with some of the content, but once we did, he expected the website to be finished immediately which was not possible. Because he needed it done urgently, we agreed to try to get it done about 10 working days after the content was provided, but the developer who was helping me let me down. The next week, I completed the website myself and uploaded it to the server on a Friday afternoon. He then calls and texts me on following Sunday while I'm at church to say it's not online (there was probably a problem with his browser). The next morning, I received an email from him demanding a full refund within two days because he couldn't see the website (even though it was live, and I tested it on multiple browsers, a different computer and my phone), and he called me shouting at me because he couldn't access it. Finally when he was able to access it, he was unhappy with a certain detail regarding the slideshow which I began fixing and which was done the next day. He then referred me to another website and said he wanted it to look similar but not identical to it in terms of the layout. He also now wanted to add more features which were not in the original design. I got a designer to work on a new design which I sent to him for review, which if approved would be completed by 15 October, and he approved it last Thursday. He then called me yesterday to say that he wanted to change the design - he only approved it out of impatience. He now wants the website to be more similar to the other website he referred me to and he wants it done before the 15th! Then, he says to me that other people have done websites for him in three days - website's he's complained to me about for lacking dimension because they were just premium themes, whereas we'd designed and coded from scratch. I'm thinking of finishing the website but refunding him in full (or at least the refundable 50%) less domain registration and other non-refundable amounts, just to avoid further escalation of this matter and having him call me next week and say he wants to change it again. These are the applicable terms and conditions as laid out in the agreement: Total amount due for this project is Amount A. Client shall pay Consultant a deposit of Amount B (50% of total amount due for project) in advance before any work commences on the Project. The balance is due within 7 working days of completion of project. Deposit is non-refundable. Should client opt to host elsewhere, applicable transferral fee of Amount C will apply. Estimated project completion time frame is 14 to 30 days from the date Client furnishes Consultant with Brief and all other required media and data, provided that Client has made payment to secure the project. Consultant will make every effort to meet agreed upon due dates. The Client should be aware that failure to submit required information or materials, or last minute changes and excessive changes may cause subsequent delays. Client delays could result in significant delays in delivery of finished work. Major changes in client input or direction or brief will be charged at normal rates. Any work the Client wishes Consultant to create, which is not specified in the attached Proposal will be considered an additional service. Client agrees to pay Consultant for any additional expenses or additional services not included in the attached quotation and proposal if requested by the Client. Web design credit in the name of the Consultant, and link to Consultant’s website shall be placed on the footer of the final Website. Either party may terminate this Agreement by giving 7 days written notice to the other of such termination. In the event that Work is postponed or terminated at the request of the Client, Consultant shall have the right to bill pro rata at full rates for work completed through the date of that request, while reserving all rights under this Agreement. If additional payment is due, this shall be payable within seven days of the Client's written notification to stop work. In the event of termination, the Client shall also pay any expenses incurred by Consultant and the Consultant shall own all rights to the Work. Advice please?

  Read the article

• WEBLOGIC 12C HANDS-ON BOOTCAMP

  - by agallego

    Oracle PartnerNetwork | Account | Feedback   JOIN THE ORACLE WEBLOGIC PARTNER COMMUNITY AND ATTEND A WEBLOGIC 12C HANDS-ON BOOTCAMP Dear partner As a valued partner we would like to invite you for the WebLogic Partner Community and our WebLogic 12c hands-on Bootcamps – free of charge! Please first login at http://partner.oracle.com and then visit: WebLogic Partner Community. (If you need support with your account please contact the Oracle Partner Business Center). The goal of the WebLogic Partner Community is to provide you with the latest information on Oracle's offerings and to facilitate the exchange of experience within community members. Register Now FREE Assessment vouchers to become certified and WebLogic Server 12c 200 new Features and Training Connect and Network   WebLogic Blogs   WebLogic on Facebook   WebLogic on LinkedIn   WebLogic on Twitter   WebLogic on Oracle Mix WebLogic 12c hands-on Workshops We offer free3 days hands-on WebLogic 12c workshops for Oracle partners who want to become Application Grid Specialized: Register Here! Country Date Location Registration   Germany  3-5 April 2012 Oracle Düsseldorf Click here   France  24-26 April 2012 Oracle Colombes Click here   Spain 08-10 May 2012  Oracle Madrid  Click here   Netherlands  22-24 May 2012  Oracle Amsterdam  Click here   United Kingdom  06-08 June 2012  Oracle Reading  Click here   Italy  19-21 June 2012  Oracle Cinisello Balsamo  Click here   Portugal  10-12 July 2012  Oracle Lisbon  Click here Skill requirements Attendees need to have the following skills as this is required by the product-set and to make sure they get the most out of the training: Basic knowledge in Java and JavaEE Understanding the Application Server concept Basic knowledge in older releases of WebLogic Server would be beneficial Member of WebLogic Partner Community for registration please vist http://www.oracle.com/partners/goto/wls-emea Hardware requirements Every participant works on his own notebook. The minimal hardware requirements are: 4Gb physical RAM (we will boot the image with 2Gb RAM)  dual core CPU 15 GB HD Software requirements Please install Oracle VM VirtualBox 4.1.8 Follow-up and certification  With the workshop registration you agree to the following next steps Follow-up training attend and pass the Oracle Application Grid Certified Implementation Specialist Registration For details and registration please visit Register Here Free WebLogic Certification (Free assessment voucher to become certified) For all WebLogic experts, we offer free vouchers worth $195 for the Oracle Application Grid Certified Implementation Specialist assessment. To demonstrate your WebLogic knowledge you first have to pass the free online assessment Oracle Application Grid PreSales Specialist. For free vouchers, please send an e-mail with the screenshot of your Oracle Application Grid PreSales certirficate to [email protected] including your Name, Company, E-mail and Country. Note: This offer is limited to partners from Europe Middle East and Africa. Partners from other countries please contact your Oracle partner manager. WebLogic Specialization To become specialized in Application Grid, please make sure that you access the: Application Grid Specialization Guide Application Grid Specialization Checklist If you have any questions please contact the Oracle Partner Business Center. Oracle WebLogic Server 12c Key New Capabilities Java EE 6 and Developer Productivity Simplified Deployment and Management with Virtualization Integrated Traffic Management Enhanced High Availability and Disaster Recovery Much Higher Performance For more information please visit: Presentation from the WebLogic 12c launch Technical Presentation from the WebLogic 12c launch WebLogic OTN Website WebLogic 12c Virtual Conference Environment WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea (OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Best regards, Jürgen Kress WebLogic Partner Adoption EMEA Tel. +49 89 1430 1479 E-Mail: [email protected]   Copyright © 2012, Oracle and/or its affiliates. All rights reserved. Contact PBC | Legal Notices and Terms of Use | Privacy Statement Oracle Corporation - Worldwide Headquarters, 500 Oracle Parkway, OPL - E-mail Services, Redwood Shores, CA 94065, United States Your privacy is important to us. You can login to your account to update your e-mail subscriptions or you can opt-out of all Oracle Marketing e-mails at any time. Please note that opting-out of Marketing communications does not affect your receipt of important business communications related to your current relationship with Oracle such as Security Updates, Event Registration notices, Account Management and Support/Service communications.

  Read the article

• What's My Problem? What's Your Problem?

  - by Jacek Ziabicki

  Software installers are not made for building demo environments. I can say this much after 12 years (on and off) of supporting my fellow sales consultants with environments for software demonstrations. When we release software, we include installation programs and procedures that are designed for use by our clients – to build a production environment and a limited number of testing, training and development environments. Different Objectives Your priorities when building an environment for client use vs. building a demo environment are very different. In a production environment, security, stability, and performance concerns are paramount. These environments are built on a specific server and rarely, if ever, moved to a different server or different network address. There is typically just one application running on a particular server (physical or virtual). Once built, the environment will be used for months or years at a time. Because of security considerations, the installation program wants to make these environments very specific to the organization using the software and the use case, encoding a fully qualified name of the server, or even the IP address on the network, in the configuration. So you either go through the installation procedure for each environment, or learn how to clone and reconfigure the software as a separate instance to build all your non-production environments. This may not matter much if the installation is as simple as clicking on the Setup program. But for enterprise applications, you have a number of configuration settings that you need to get just right – so whether you are installing from scratch or reconfiguring an existing installation, this requires both time and expertise in the particular piece of software. If you need a setup of several applications that are integrated to talk to one another, it is a whole new level of complexity. Now you need the expertise in all of the applications involved (plus the supporting technology products), and in addition to making each application work, you also have to configure the integration endpoints. Each application needs the URLs and credentials to call the integration layer, and the integration must be able to call each application. Then you have to make sure that each app has the right data so a business process initiated in one application can continue in the next. And, you will need to check that each application has the correct version and patch level for the integration to work. When building demo environments, your #1 concern is agility. If you can get away with a small number of long-running environments, you are lucky. More likely, you may get a request for a dedicated environment for a demonstration that is two weeks away: how quickly can you make this available so we still have the time to build the client-specific data? We are running a hands-on workshop next month, and we’ll need 15 instances of application X environment so each student can have a separate server for the exercises. We cannot connect to our data center from the client site, the client’s security policy won’t allow our VPN to go through – so we need a portable environment that we can bring with us. Our consultants need to be able to work at the hotel, airport, and the airplane, so we really want an environment that can run on a laptop. The client will need two playpen environments running in the cloud, accessible from their network, for a series of workshops that start two weeks from now. We have seen all of these scenarios and more. Here you would be much better served by a generic installation that would be easy to clone. Welcome to the Wonder Machine The reason I started this blog is to share a particular design of a demo environment, a special way to install software, that can address the above requirements, even for integrated setups. This design was created by a team at Oracle Utilities Global Business Unit, and we are using this setup for most of our demo environments. In a bout of modesty we called it the Wonder Machine. Over the next few posts – think of it as a novel in parts – I will tell you about the big idea, how it was implemented and what you can do with it. After we have laid down the groundwork, I would like to share some tips and tricks for users of our Wonder Machine implementation, as well as things I am learning about building portable, cloneable environments. The Wonder Machine is by no means a closed specification, it is under active development! I am hoping this blog will be of interest to two groups of readers – the users of the Wonder Machine we have built at Oracle Utilities, who want to get the most out of their demo environments and be able to reconfigure it to their needs – and to people who need to build environments for demonstration, testing, training, development and would like to make them cloneable and portable to maximize the reuse of their effort. Surely we are not the only ones facing this problem? If you can think of a better way to solve it, or if you can help us improve on our concept, I will appreciate your comments!

  Read the article

• Removing AppPrincipals from Office365

  - by Sahil Malik

  SharePoint, WCF and Azure Trainings: more information So here is an annoying issue. If I have your AppPrincipal and secret, I can party as you! But as we go through our usual dev cycles, we create these ApplicationIDs. Hell Visual Studio will create them for us, to make things easy!The problem is, many a developer, and some a ITOgre, may leave these AppPrincipalIds sitting there and not clean them up when they are done playing. You can look for currently registered App Principals at https://yourtenant/_layouts/15/appprincipals.aspx The problem is, that URL shows you App Principals registered AND currently in use. Currently NOT in use App Principals are NOT shown on that page. The same issue applies on premises also, even though here I am talking specifically about Office 365. Getting rid of these in On-Prem is easy, just use the Object model (server side). Read full article ....

  Read the article

• A Knights Tale

  - by Phil Factor

  There are so many lessons to be learned from the story of Knight Capital losing nearly half a billion dollars as a result of a deployment gone wrong. The Knight Capital Group (KCG N) was an American global financial services firm engaging in market making, electronic execution, and institutional sales and trading. According to the recent order (File No.3.15570) against Knight Capital by U.S. Securities and Exchange Commission?, Knight had, for many years used some software which broke up incoming “parent” orders into smaller “child” orders that were then transmitted to various exchanges or trading venues for execution. A tracking ‘cumulative quantity’ function counted the number of ‘child’ orders and stopped the process once the total of child orders matched the ‘parent’ and so the parent order had been completed. Back in the mists of time, some code had been added to it  which was excuted if a particular flag was set. It was called ‘power peg’ and seems to have had a similar design and purpose, but, one guesses, would have shared the same tracking function. This code had been abandoned in 2003, but never deleted. In 2005, The tracking function was moved to an earlier point in the main process. It would seem from the account that, from that point, had that flag ever been set, the old ‘Power Peg’ would have been executed like Godzilla bursting from the ice, making child orders without limit without any tracking function. It wasn’t, presumably because the software that set the flag was removed. In 2012, nearly a decade after ‘Power Peg’ was abandoned, Knight prepared a new module to their software to cope with the imminent Retail Liquidity Program (RLP) for the New York Stock Exchange. By this time, the flag had remained unused and someone made the fateful decision to reuse it, and replace the old ‘power peg’ code with this new RLP code. Had the two actions been done together in a single automated deployment, and the new deployment tested, all would have been well. It wasn’t. To quote… “Beginning on July 27, 2012, Knight deployed the new RLP code in SMARS in stages by placing it on a limited number of servers in SMARS on successive days. During the deployment of the new code, however, one of Knight’s technicians did not copy the new code to one of the eight SMARS computer servers. Knight did not have a second technician review this deployment and no one at Knight realized that the Power Peg code had not been removed from the eighth server, nor the new RLP code added. Knight had no written procedures that required such a review.” (para 15) “On August 1, Knight received orders from broker-dealers whose customers were eligible to participate in the RLP. The seven servers that received the new code processed these orders correctly. However, orders sent with the repurposed flag to the eighth server triggered the defective Power Peg code still present on that server. As a result, this server began sending child orders to certain trading centers for execution. Because the cumulative quantity function had been moved, this server continuously sent child orders, in rapid sequence, for each incoming parent order without regard to the number of share executions Knight had already received from trading centers. Although one part of Knight’s order handling system recognized that the parent orders had been filled, this information was not communicated to SMARS.” (para 16) SMARS routed millions of orders into the market over a 45-minute period, and obtained over 4 million executions in 154 stocks for more than 397 million shares. By the time that Knight stopped sending the orders, Knight had assumed a net long position in 80 stocks of approximately $3.5 billion and a net short position in 74 stocks of approximately $3.15 billion. Knight’s shares dropped more than 20% after traders saw extreme volume spikes in a number of stocks, including preferred shares of Wells Fargo (JWF) and semiconductor company Spansion (CODE). Both stocks, which see roughly 100,000 trade per day, had changed hands more than 4 million times by late morning. Ultimately, Knight lost over $460 million from this wild 45 minutes of trading. Obviously, I’m interested in all this because, at one time, I used to write trading systems for the City of London. Obviously, the US SEC is in a far better position than any of us to work out the failings of Knight’s IT department, and the report makes for painful reading. I can’t help observing, though, that even with the breathtaking mistakes all along the way, that a robust automated deployment process that was ‘all-or-nothing’, and tested from soup to nuts would have prevented the disaster. The report reads like a Greek Tragedy. All the way along one wants to shout ‘No! not that way!’ and ‘Aargh! Don’t do it!’. As the tragedy unfolds, the audience weeps for the players, trapped by a cruel fate. All application development and deployment requires defense in depth. All IT goes wrong occasionally, but if there is a culture of defensive programming throughout, the consequences are usually containable. For financial systems, these defenses are required by statute, and ignored only by the foolish. Knight’s mistakes weren’t made by just one hapless sysadmin, but were progressive errors by an  IT culture spanning at least ten years.  One can spell these out, but I think they’re obvious. One can only hope that the industry studies what happened in detail, learns from the mistakes, and draws the right conclusions.

  Read the article

• Managing text-maps in a 2D array on to be painted on HTML5 Canvas

  - by weka

  So, I'm making a HTML5 RPG just for fun. The map is a <canvas> (512px width, 352px height | 16 tiles across, 11 tiles top to bottom). I want to know if there's a more efficient way to paint the <canvas>. Here's how I have it right now. How tiles are loaded and painted on map The map is being painted by tiles (32x32) using the Image() piece. The image files are loaded through a simple for loop and put into an array called tiles[] to be PAINTED on using drawImage(). First, we load the tiles... and here's how it's being done: // SET UP THE & DRAW THE MAP TILES tiles = []; var loadedImagesCount = 0; for (x = 0; x <= NUM_OF_TILES; x++) { var imageObj = new Image(); // new instance for each image imageObj.src = "js/tiles/t" + x + ".png"; imageObj.onload = function () { console.log("Added tile ... " + loadedImagesCount); loadedImagesCount++; if (loadedImagesCount == NUM_OF_TILES) { // Onces all tiles are loaded ... // We paint the map for (y = 0; y <= 15; y++) { for (x = 0; x <= 10; x++) { theX = x * 32; theY = y * 32; context.drawImage(tiles[5], theY, theX, 32, 32); } } } }; tiles.push(imageObj); } Naturally, when a player starts a game it loads the map they last left off. But for here, it an all-grass map. Right now, the maps use 2D arrays. Here's an example map. [[4, 1, 4, 1, 4, 1, 4, 1, 4, 1, 4, 1, 1, 1, 1, 1], [1, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 1, 1, 1, 1, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 1, 13, 13, 1, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 1, 13, 13, 1, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 1, 13, 13, 1, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 1, 1, 1, 1, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 13, 13, 13, 1, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 13, 13, 11, 11, 11, 13, 13, 13, 13, 13, 13, 13, 1], [13, 13, 13, 1, 1, 1, 1, 1, 1, 1, 13, 13, 13, 13, 13, 1], [1, 1, 1, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 1, 1, 1]]; I get different maps using a simple if structure. Once the 2d array above is return, the corresponding number in each array will be painted according to Image() stored inside tile[]. Then drawImage() will occur and paint according to the x and y and times it by 32 to paint on the correct x-y coordinate. How multiple map switching occurs With my game, maps have five things to keep track of: currentID, leftID, rightID, upID, and bottomID. currentID: The current ID of the map you are on. leftID: What ID of currentID to load when you exit on the left of current map. rightID: What ID of currentID to load when you exit on the right of current map. downID: What ID of currentID to load when you exit on the bottom of current map. upID: What ID of currentID to load when you exit on the top of current map. Something to note: If either leftID, rightID, upID, or bottomID are NOT specific, that means they are a 0. That means they cannot leave that side of the map. It is merely an invisible blockade. So, once a person exits a side of the map, depending on where they exited... for example if they exited on the bottom, bottomID will the number of the map to load and thus be painted on the map. Here's a representational .GIF to help you better visualize: As you can see, sooner or later, with many maps I will be dealing with many IDs. And that can possibly get a little confusing and hectic. The obvious pros is that it load 176 tiles at a time, refresh a small 512x352 canvas, and handles one map at time. The con is that the MAP ids, when dealing with many maps, may get confusing at times. My question Is this an efficient way to store maps (given the usage of tiles), or is there a better way to handle maps? I was thinking along the lines of a giant map. The map-size is big and it's all one 2D array. The viewport, however, is still 512x352 pixels. Here's another .gif I made (for this question) to help visualize: Sorry if you cannot understand my English. Please ask anything you have trouble understanding. Hopefully, I made it clear. Thanks.

  Read the article

• Synergy - easy share of keyboard and mouse between multiple computers

  Did you ever have the urge to share one set of keyboard and mouse between multiple machines? If so, please read on... Using multiple machines Honestly, as a software craftsman it is my daily business to run multiple machines - either physical or virtual - to be able to solve my customers' requirements. Recent hardware equipment allows this very easily. For laptops it's a no-brainer to attach a second or even a third screen in order to extend your native display. This works quite handy and in my case I used to attached two additional screens - one via HD15 connector, the other via HDMI. But... as it's a laptop and therefore a mobile unit there are slight restrictions. Detaching and re-attaching all cables when changing locations is one of them but hardware limitations, too. After all, it's a laptop and not a workstation. I guess, that anyone working in IT (or ICT) has more than one machine at their workplace or their home office and at least I find it quite annoying to have multiple sets of keyboard and mouse conquering my remaining space on my desk. Despite the ugly looks of all those cables and whatsoever 'chaos of distraction' I prefer a more clean solution and working environment. This allows me to actually focus on my work and tasks to do rather than to worry about choosing the right combination of keyboard/mouse. My current workplace is a patch work of various pieces of hardware (approx. 2-3 years): DIY desktop on Ubuntu 12.04 64-bit, Core2 Duo (E7400, 2.8GHz), 4GB RAM, 2x 250GB HDD, nVidia GPU 512MB Dell Inspiron 1525 on Windows 8 64-bit, 4GB RAM, 200GB HDD HP Compaq 6720s on Windows Vista 32-bit, Core2 Duo (T5670, 1.8GHz), 2GB RAM, 160GB HDD Mac mini on Mac OS X 10.7, Core i5 (2.3 GHz), 2GB RAM, 500GB HDD I know... Not the latest and greatest but a decent combination to work with. New system(s) is/are already on the shopping list but I live in the 'wrong' country to buy computer hardware. So, the next trip abroad will provide me with some new stuff. Using multiple operating systems The list of hardware above already names different operating systems, and actually I have only one preference: Linux. But still my job as a software craftsman for Visual FoxPro and .NET development requires other OSes, too. Not a big deal, it's just like this. Additionally to those physical machines, there are a bunch of virtual machines around. Most of them running either Windows XP or Windows 7. Since years I have the practice that each development for one customer is isolated into its own virtual machine and environment. This keeps it clean and version-safe. But as you can easily imagine with that setup there are a couple of constraints referring to keyboard and mouse. Usually, those systems require their own pieces of hardware attached. As stated, I don't like clutter on my desk's surface, so a cross-platform solution has to come in here. In the past, I tried it with various applications, hardware or network protocols like X11, RDP, NX, TeamViewer, RAdmin, KVM switch, etc. but the problem in this case is that they either allow you to remotely connect to the other system or exclusively 'bind' your peripherals to the active system. Not optimal after all. Synergy to the rescue Quote from their website: "Synergy lets you easily share your mouse and keyboard between multiple computers on your desk, and it's Free and Open Source. Just move your mouse off the edge of one computer's screen on to another. You can even share all of your clipboards. All you need is a network connection. Synergy is cross-platform (works on Windows, Mac OS X and Linux)." Yep, that's it! All I need for my setup here... Actually, I couldn't believe it myself that I didn't stumble over synergy earlier but 'Get over it' and there we go. And despite the fact that it is Open Source, no, it's also for free. Donations for the developers are very welcome and recently they introduced Synergy Premium. A possibility to buy so-called premium votes that can be used to put more weight / importance on specific issues or bugs that you would like the developers to look into. Installation and configuration Simply download the installation packages for your systems of choice, run the installer and enter some minor information about your network setup. I chose my desktop machine for the role of the Synergy server and configured my screen setup as follows: The screen setup allows you currently to build or connect up to 15 machines. The number of screens can be higher as those machine might have multiple screens physically attached. Synergy takes this into the overall calculations and simply works as expected. I tried it for fun with a second monitor each connected to both laptops to have a total number of 6 active screens. No flaws after all - stunning! All the other machines are configured as clients like so: Side note: The screenshot was taken on Windows 8 and pasted via clipboard into Gimp running on Ubuntu. Resume Synergy is now definitely in my box of tools for my daily work, and amongst the first pieces of software I install after the operating system. It just simplifies my life and cleans my desk. Never again without Synergy!Now, only waiting for an Android version to integrate my Galaxy Tab 10.1, too. ;-) Please, check out that superb product and enjoy sharing one keyboard, one mouse and one clipboard between your various machines and operating systems.

  Read the article

• Is IE9 a modern browser?

  - by TATWORTH

  At http://people.mozilla.com/~prouget/ie9/ there is a very provocative article entitled "Is IE9 a modern browser?". There is a rebuttal by Tim Sneath at http://blogs.msdn.com/b/tims/archive/2011/02/15/a-modern-browser.aspx that is well worth a look. Certainly IE9 is already superior to its predecessors. My comment on the matter is that those that consider IE9 to be non-standards compliant, should submit tests to the W3C to demonstrate the non-compliance. Upon acceptance by the W3C, all the competing browsers can then be re-tested. I prefer objective tests to subjective opinion. I have used IE9 and on some sites such as Hotmail, it is noticeably faster. I have so far been unable to apply the promised IE9 lockout of spyware cookies. With Firefox, I just instal NoScript and never enable spyware sites.

  Read the article

• How to return older Thunderbird version?

  - by Holger

  today at startup my Tb (not precisely sure what version it was) asked if it should check compatibility of the lightning calendar addon. That is to say it displayed in a list windows the only item: lightning and said it was not compatible. Choices were "check" or "don't" check compatibility. I clicked on check and after nothing happened for several minutes on "cancel". So, now my Tb is upgraded to 15.0 and Lightning isn't there anymore. It never asked me to upgrade anyway and I urgently need my calendar now. Any suggestions warmly welcome! Holger

  Read the article

• Exadata?????????INSERT?UPDATE

  - by Liu Maclean(???)

  Hybrid Columnar Compression??????Exadata?????????????,??????????(advanced compression)??,Hybrid columnar compression (HCC) ???Exadata????????HCC???????????CU(compression unit?????),??CU??????????,?????????????????????????,???CU????block??????????????? ???????INSERT/UPDATE??,??????????????,????UPDATE/INSERT???HCC?????????????????? hybrid columnar compression???????????????(bulk initial load)??,??????(direct load)??ALTER TABLE MOVE, IMPDP???????(append INSERT),??HCC??????????????????????? ???????????????????,?????????CU????????? ??????????????HCC?????????????for OLTP?????? ????????: SQL*Plus: Release 11.2.0.2.0 Production on Wed Sep 12 06:14:53 2012 Copyright (c) 1982, 2010, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production With the Partitioning, Automatic Storage Management, OLAP, Data Mining and Real Application Testing options SQL> grant dba to scott; Grant succeeded. SQL> conn scott/oracle Connected. SQL> SQL> create table hcc_maclean tablespace users compress for query high as select * from dba_objects; Table created. 1* select rowid,owner,object_name,dbms_rowid.rowid_block_number(rowid) from hcc_maclean where owner='MACLEAN' SQL> / ROWID OWNER OBJECT_NAME DBMS_ROWID.ROWID_BLOCK_NUMBER(ROWID) ------------------------------ ------------------------------ -------------------- ------------------------------------ AAAThuAAEAAAHTJAOI MACLEAN SALES 29897 AAAThuAAEAAAHTJAOJ MACLEAN MYCUSTOMERS 29897 AAAThuAAEAAAHTJAOK MACLEAN MYCUST_ARCHIVE 29897 AAAThuAAEAAAHTJAOL MACLEAN MYCUST_QUERY 29897 AAAThuAAEAAAHTJAOh MACLEAN COMPRESS_QUERY 29897 AAAThuAAEAAAHTJAOi MACLEAN UNCOMPRESS 29897 AAAThuAAEAAAHTJAOj MACLEAN CHAINED_ROWS 29897 AAAThuAAEAAAHTJAOk MACLEAN COMPRESS_QUERY1 29897 8 rows selected. select dbms_rowid.rowid_block_number(rowid),dbms_rowid.rowid_relative_fno(rowid) from hcc_maclean where owner='MACLEAN'; session A: update hcc_maclean set OBJECT_NAME=OBJECT_NAME||'DBM' where rowid='AAAThuAAEAAAHTJAOI'; session B: update hcc_maclean set OBJECT_NAME=OBJECT_NAME||'DBM' where rowid='AAAThuAAEAAAHTJAOJ'; SQL> select sid,wait_event_text,BLOCKER_SID from v$wait_chains; SID WAIT_EVENT_TEXT BLOCKER_SID ---------- ---------------------------------------------------------------- ----------- 13 enq: TX - row lock contention 136 136 SQL*Net message from client ????session A block B,????HCC???update row??CU?????CU?????? SQL> alter system checkpoint; System altered. SQL> / System altered. SQL> alter system dump datafile 4 block 29897 2 ; Block header dump: 0x010074c9 Object id on Block? Y seg/obj: 0x1386e csc: 0x00.1cad7e itc: 3 flg: E typ: 1 - DATA brn: 0 bdba: 0x10074c8 ver: 0x01 opc: 0 inc: 0 exflg: 0 Itl Xid Uba Flag Lck Scn/Fsc 0x01 0xffff.000.00000000 0x00000000.0000.00 C--- 0 scn 0x0000.001cabfa 0x02 0x000a.00a.00000430 0x00c051a7.0169.17 ---- 1 fsc 0x0000.00000000 0x03 0x0000.000.00000000 0x00000000.0000.00 ---- 0 fsc 0x0000.00000000 avsp=0x14 tosp=0x14 r0_9ir2=0x0 mec_kdbh9ir2=0x0 76543210 shcf_kdbh9ir2=---------- 76543210 flag_9ir2=--R----- Archive compression: Y fcls_9ir2[0]={ } 0x16:pti[0] nrow=1 offs=0 0x1a:pri[0] offs=0x30 block_row_dump: tab 0, row 0, @0x30 tl: 8016 fb: --H-F--N lb: 0x2 cc: 1 ==>??CU??ITL 0x02 nrid: 0x010074ca.0 col 0: [8004] Compression level: 02 (Query High) Length of CU row: 8004 kdzhrh: ------PC CBLK: 1 Start Slot: 00 NUMP: 01 PNUM: 00 POFF: 7984 PRID: 0x010074ca.0 CU header: CU version: 0 CU magic number: 0x4b445a30 CU checksum: 0xf8faf86e CU total length: 8694 CU flags: NC-U-CRD-OP ncols: 15 nrows: 995 algo: 0 CU decomp length: 8487 len/value length: 100111 row pieces per row: 1 num deleted rows: 1 deleted rows: 904, START_CU: ????????????row?????: SQL> select DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN','AAAThuAAEAAAHTJAOk') from dual; DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN','AAATHUAAEAAAHTJAOK' -------------------------------------------------------------------------------- 4 COMP_NOCOMPRESS CONSTANT NUMBER := 1;COMP_FOR_OLTP CONSTANT NUMBER := 2;COMP_FOR_QUERY_HIGH CONSTANT NUMBER := 4;COMP_FOR_QUERY_LOW CONSTANT NUMBER := 8;COMP_FOR_ARCHIVE_HIGH CONSTANT NUMBER := 16;COMP_FOR_ARCHIVE_LOW CONSTANT NUMBER := 32; COMP_RATIO_MINROWS CONSTANT NUMBER := 1000000;COMP_RATIO_ALLROWS CONSTANT NUMBER := -1; ?????????????,??COMP_FOR_QUERY_HIGH?4,COMP_FOR_QUERY_LOW ?8 ?????????GET_COMPRESSION_TYPE??rowid????????4?????COMP_FOR_QUERY_HIGH????: SQL> update hcc_maclean set OBJECT_NAME=OBJECT_NAME||'DBM' where owner='MACLEAN'; 8 rows updated. SQL> commit; Commit complete. SQL> select DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN',rowid) from HCC_MACLEAN where owner='MACLEAN'; DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN',ROWID) ------------------------------------------------------------------ 1 1 1 1 1 1 1 1 8 rows selected. ??????????????COMPRESSION_TYPE?COMP_FOR_QUERY_HIGH???COMP_NOCOMPRESS,????????compress for query high????????????????? ?11g????????????????????HCC??????????? ALTER TABLE MOVE???????????????????HCC??? SQL> ALTER TABLE hcc_MACLEAN move COMPRESS FOR ARCHIVE HIGH; Table altered. SQL> select DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN',rowid) from HCC_MACLEAN where owner='MACLEAN'; DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN',ROWID) ------------------------------------------------------------------ 16 16 16 16 16 16 16 16 8 rows selected.

  Read the article

• My own personal use of Oracle Linux

  - by wcoekaer

  It always is easier to explain something with examples... Many people still don't seem to understand some of the convenient things around using Oracle Linux and since I personally (surprise!) use it at home, let me give you an idea. I have quite a few servers at home and I also have 2 hosted servers with a hosted provider. The servers at home I use mostly to play with random Linux related things, or with Oracle VM or just try out various new Oracle products to learn more. I like the technology, it's like a hobby really. To be able to have a good installation experience and use an officially certified Linux distribution and not waste time trying to find the right libraries, I, of course, use Oracle Linux. Now, at least I can get a copy of Oracle Linux for free (even if I was not working for Oracle) and I can/could use that on as many servers at home (or at my company if I worked elsewhere) for testing, development and production. I just go to http://edelivery.oracle.com/linux and download the version(s) I want and off I go. Now, I also have the right (and not because I am an employee) to take those images and put them on my own server and give them to someone else, I in fact, just recently set up my own mirror on my own hosted server. I don't have to remove oracle-logos, I don't have to rebuild the ISO images, I don't have to recompile anything, I can just put the whole binary distribution on my own server without contract. Perfectly free to do so. Of course the source code of all of this is there, I have a copy of the UEK code at home, just cloned from https://oss.oracle.com/git/?p=linux-2.6-unbreakable.git. And as you can see, the entire changelog, checkins, merges from Linus's tree, complete overview of everything that got changed from kernel to kernel, from patch to patch, errata to errata. No obfuscating, no tar balls and spending time with diff, or go read bug reports to find out what changed (seems silly to me). Some of my servers are on the external network and I need to be current with security errata, but guess what, no problem, my servers are hooked up to http://public-yum.oracle.com which is open, free, and completely up to date, in a consistent, reliable way with any errata, security or bugfix. So I have nothing to worry about. Also, not because I am an employee. Anyone can. And, with this, I also can, and have, set up my own mirror site that hosts these RPMs. both binary and source rpms. Because I am free to get them and distribute them. I am quite capable of supporting my servers on my own, so I don't need to rely on the support organization so I don't need to have a support subscription :-). So I don't need to pay. Neither would you, at least not with Oracle Linux. Another cool thing. The hosted servers came (unfortunately) with Centos installed. While Centos works just fine as is, I tend to prefer to be current with my security errata(reliably) and I prefer to just maintain one yum repository instead of 2, I converted them over to Oracle Linux as well (in place) so they happily receive and use the exact same RPMs. Since Oracle Linux is exactly the same from a user/application point of view as RHEL, including files like /etc/redhat-release and no changes from .el. to .centos. I know I have nothing to worry about installing one of the RHEL applications. So, OL everywhere makes my life a lot easier and why not... Next! Since I run Oracle VM and I have -tons- of VM's on my machines, in some cases on my big WOPR box I have 15-20 VMs running. Well, no problem, OL is free and I don't have to worry about counting the number of VMs, whether it's 1, or 4, or more than 10 ... like some other alternatives started doing... and finally :) I like to try out new stuff, not 3 year old stuff. So with UEK2 as part of OL6 (and 6.3 in particular) I can play with a 3.0.x based kernel and it just installs and runs perfectly clean with OL6, so quite current stuff in an environment that I know works, no need to toy around with an unsupported pre-alpha upstream distribution with libraries and versions that are not compatible with production software (I have nothing against ubuntu or fedora or opensuse... just not what I can rely on or use for what I need, and I don't need a desktop). pretty compelling. I say... and again, it doesn't matter that I work for Oracle, if I was working elsewhere, or not at all, all of the above would still apply. Student, teacher, developer, whatever. contrast this with $349 for 2 sockets and oneguest and selfsupport per year to even just get the software bits.

  Read the article

• Mounting ddrescue image after recovery (in over my head)

  - by BorgDomination

  I'm having problems mounting the recovery image. I've tried to mount the image multiple ways. quark@DS9 ~ $ sudo mount -t ext4 /media/jump1/1recover/sdb1.img /mnt mount: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so quark@DS9 ~ $ sudo mount -r -o loop /media/jump1/1recover/sdb1.img recover mount: you must specify the filesystem type quark@DS9 ~ $ sudo mount /media/jump1/1recover/sdb1.img mnt mount: you must specify the filesystem type It doesn't even give me detailed information on the file I just made, nautilus says it's 160gb. quark@DS9 ~ $ file /media/jump1/1recover/sdb1.img /media/jump1/1recover/sdb1.img: data quark@DS9 ~ $ mmls /media/jump1/1recover/sdb1.img Cannot determine partition type I'm not sure what I'm doing wrong or if I started this process incorrectly from the beginning. I've outlined what I've done so far below. I'm clueless, I'd appreciate if someone had some input for me. What I have done from the beginning My laptop has two hard drives. One has the dual boot Win7 / Linux Mint system files. Secondary one contained my /home folder. The laptop was jarred and the /home disk was broken. I tried a LiveCD recovery, it failed. Wouldn't even load a Live session with the disk installed. So I turned to ddrescue. quark@DS9 ~ $ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009fc18 Device Boot Start End Blocks Id System /dev/sda1 * 2048 112642047 56320000 7 HPFS/NTFS/exFAT /dev/sda2 138033152 312580095 87273472 83 Linux /dev/sda3 112644094 138033151 12694529 5 Extended /dev/sda5 112644096 132173823 9764864 83 Linux /dev/sda6 132175872 138033151 2928640 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdb: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002a8ea Device Boot Start End Blocks Id System /dev/sdb1 * 63 312576704 156288321 83 Linux Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xed6d054b Device Boot Start End Blocks Id System /dev/sdc1 63 1953520064 976760001 7 HPFS/NTFS/exFAT sda - 160g internal, holds all system files and all computer functions. sdb - 160g internal, BROKEN, contains about 140g of data I'd like to recover. sdc - 1T external, contains recovery image. Only place that has space to do all this. From this site, https://apps.education.ucsb.edu/wiki/Ddrescue I used this script to create an image of the broken hard drive. I changed the destination to the external USB drive. #!/bin/sh prt=sdb1 src=/dev/$prt dst=/media/jump1/1recover/$prt.img log=$dst.log sudo time ddrescue --no-split $src $dst $log sudo time ddrescue --direct --max-retries=3 $src $dst $log sudo time ddrescue --direct --retrim --max-retries=3 $src $dst $log Everything looked like it came off without a hitch: quark@DS9 ~ $ sudo bash recover1 Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 0 B, errsize: 0 B, errors: 0 Current status rescued: 160039 MB, errsize: 4096 B, current rate: 35588 B/s ipos: 3584 B, errors: 1, average rate: 22859 kB/s opos: 3584 B, time from last successful read: 0 s Finished 12.78user 1060.42system 1:56:41elapsed 15%CPU (0avgtext+0avgdata 4944maxresident)k 312580958inputs+0outputs (1major+601minor)pagefaults 0swaps Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 160039 MB, errsize: 4096 B, errors: 1 Current status rescued: 160039 MB, errsize: 1024 B, current rate: 0 B/s ipos: 1536 B, errors: 1, average rate: 13 B/s opos: 1536 B, time from last successful read: 1.3 m Finished 0.00user 0.00system 3:43.95elapsed 0%CPU (0avgtext+0avgdata 4944maxresident)k 238inputs+0outputs (3major+374minor)pagefaults 0swaps Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 160039 MB, errsize: 1024 B, errors: 1 Current status rescued: 160039 MB, errsize: 1024 B, current rate: 0 B/s ipos: 1536 B, errors: 1, average rate: 0 B/s opos: 1536 B, time from last successful read: 3.7 m Finished 0.00user 0.00system 3:43.56elapsed 0%CPU (0avgtext+0avgdata 4944maxresident)k 8inputs+0outputs (0major+376minor)pagefaults 0swaps It looks like, from where I'm standing it worked perfectly. Here's the log: # Rescue Logfile. Created by GNU ddrescue version 1.14 # Command line: ddrescue --direct --retrim --max-retries=3 /dev/sdb1 /media/jump1/1recover/sdb1.img /media/jump1/1recover/sdb1.img.log # current_pos current_status 0x00000600 + # pos size status 0x00000000 0x00000400 + 0x00000400 0x00000400 - 0x00000800 0x254314FC00 + I'm not sure how to proceed. Does this mean all of my data is lost???????? Appreciate ANY input!

  Read the article

• Question about server usage, big community platform

  - by Json

  I’m working on a community platform writen in PHP, MySQL. I have some questions about the server usage maybe someone can help me out. The community is based on JQuery with many ajax requests to update content. It makes 5 - 10 AJAX(Json, GET, POST) requests every 5 seconds, the requests fetch user data like user notifications and messages by doing mySQL queries. I wonder how a server will handle this when there are for more than 5000 users online. Then it will be 50.000 requests every 5 seconds, what kind of server you need to handle this? Or maybe even more, when there are 15.000 users online, 150.000 requests every 5 seconds. My webserver have the following specs. Xeon Quad 2048MB 5000GB traffic Will it be good enough, and for how many users? Anyone can help me out or know where to find such information, like make a calculation?

  Read the article

• Display not using xorg.conf?

  - by mark kirby

  How can I force my PC to use the xorg.conf file ? I have it set up correctly and it is located at etc/x11/xorg.conf but it is ignored by at start up, I know the file is valid as I created it using nvidia-settings. I just do not know why it is been ignored. Thanks for any help Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Vestel 40 FHD_LCD-TV" HorizSync 15.0 - 46.0 VertRefresh 49.0 - 61.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 650" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-0" Option "metamodes" "1920x1080_60 +0+0" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Install Oracle Enterprise Linux 5 on VMWare

  - by TUFEKCIOGLU,FATIH

  In this article, we will try to install Install Oracle Enterprise Linux 5 on VMWare. To make the installation easier, I will show the screenshots of the whole steps. 1.   2.   3.   4.   5.   6. 7. 8.   9.   10.   11.   12.   13.   14.   15.   16.   17.   18.   19.   20.   21.   22.   23.   24.   25.   26.   27.   28.   29.   30.   31.   32.   33.   34.   35.   36.   37.   38.   39.   40.   41.   42.   43.   44.   45.   46.   47.   48.   49.   50.   51.   52.   53.   54.   55.   56.   57.   58.   59.   60.   61.   62.   The installation is completed, Thanks, Fatih Tufekcioglu  

  Read the article

• Redirect Google crawler to different robots.txt via .htaccess

  - by user3474818

  I have googled for the answer all day and still couldn't find an answer. I have a virtual subdomain www.static.example.com which is a mirror site of www.example.com. It means I have just one root folder for subdomain and domain aswell. I want to redirect crawlers to different robots.txt file - robots_static.txt when they see .static in url in which I will forbid indexing via /disallow command. I want to do this because I have duplicated content in Google search results. Subdomain is showing the exact same content as the main domain. Does anyone know how could I achieve that crawlers sees robots_static.txt instead of robots.txt? What I have managed to find so far is this: RewriteCond %{HTTP_HOST} ^www.static.*$ [NC] RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /.*robots\.txt.*\ HTTP/ [NC] RewriteRule ^robots\.txt /robots_static.txt [NC,L] but when I check in webmaster tools, it still sees robots.txt as my robots file instead of robots_static.txt, so it crawls and index everything twice. What did I do wrong? Thanks EDIT: This is my .htaccess file ## # @package Joomla # @copyright Copyright (C) 2005 - 2013 Open Source Matters. All rights reserved. # @license GNU General Public License version 2 or later; see LICENSE.txt ## ## # READ THIS COMPLETELY IF YOU CHOOSE TO USE THIS FILE! # # The line just below this section: 'Options +FollowSymLinks' may cause problems # with some server configurations. It is required for use of mod_rewrite, but may already # be set by your server administrator in a way that dissallows changing it in # your .htaccess file. If using it causes your server to error out, comment it out (add # to # beginning of line), reload your site in your browser and test your sef url's. If they work, # it has been set by your server administrator and you do not need it set here. ## ## Can be commented out if causes errors, see notes above. Options +FollowSymLinks ## Mod_rewrite in use. RewriteEngine On RewriteEngine On RewriteCond %{HTTP_HOST} !^www\. RewriteRule ^(.*)$ http://www.%{HTTP_HOST}/$1 [R=301,L] RewriteCond %{HTTP_HOST} ^www.static.*$ [NC] RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /.*robots\.txt.*\ HTTP/ [NC] RewriteRule ^robots\.txt /robots_static.txt [NC,L] ## Begin - Rewrite rules to block out some common exploits. # If you experience problems on your site block out the operations listed below # This attempts to block the most common type of exploit `attempts` to Joomla! # # Block out any script trying to base64_encode data within the URL. RewriteCond %{QUERY_STRING} base64_encode[^(]*\([^)]*\) [OR] # Block out any script that includes a <script> tag in URL. RewriteCond %{QUERY_STRING} (<|%3C)([^s]*s)+cript.*(>|%3E) [NC,OR] # Block out any script trying to set a PHP GLOBALS variable via URL. RewriteCond %{QUERY_STRING} GLOBALS(=|\[|\%[0-9A-Z]{0,2}) [OR] # Block out any script trying to modify a _REQUEST variable via URL. RewriteCond %{QUERY_STRING} _REQUEST(=|\[|\%[0-9A-Z]{0,2}) # Return 403 Forbidden header and show the content of the root homepage RewriteRule .* index.php [F] # ## End - Rewrite rules to block out some common exploits. ## Begin - Custom redirects # # If you need to redirect some pages, or set a canonical non-www to # www redirect (or vice versa), place that code here. Ensure those # redirects use the correct RewriteRule syntax and the [R=301,L] flags. # ## End - Custom redirects ## # Uncomment following line if your webserver's URL # is not directly related to physical file paths. # Update Your Joomla! Directory (just / for root). ## # RewriteBase / RewriteCond %{THE_REQUEST} ^GET.*index\.php [NC] RewriteCond %{THE_REQUEST} !/system/.* RewriteRule (.*?)index\.php/*(.*) /$1$2 [R=301,L] RewriteCond %{THE_REQUEST} ^GET ## Begin - Joomla! core SEF Section. # RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization}] # # If the requested path and file is not /index.php and the request # has not already been internally rewritten to the index.php script RewriteCond %{REQUEST_URI} !^/index\.php # and the request is for something within the component folder, # or for the site root, or for an extensionless URL, or the # requested URL ends with one of the listed extensions RewriteCond %{REQUEST_URI} /component/|(/[^.]*|\.(php|html?|feed|pdf|vcf|raw))$ [NC] # and the requested path and file doesn't directly match a physical file RewriteCond %{REQUEST_FILENAME} !-f # and the requested path and file doesn't directly match a physical folder RewriteCond %{REQUEST_FILENAME} !-d # internally rewrite the request to the index.php script RewriteRule .* index.php [L] # ## End - Joomla! core SEF Section. <FilesMatch "\.(ico|pdf|flv|jpg|ttf|jpg|jpeg|png|gif|js|css|swf)$"> Header set Expires "Wed, 15 Apr 2020 20:00:00 GMT" Header set Cache-Control "public" </FilesMatch> <ifModule mod_headers.c> Header set Connection keep-alive </ifModule> ########## Begin - Remove Etags # FileETag none # ########## End - Remove Etags

  Read the article

• Quadratic Programming with Oracle R Enterprise

  - by Jeff Taylor-Oracle

       I wanted to use quadprog with ORE on a server running Oracle Solaris 11.2 on a Oracle SPARC T-4 server For background, see: Oracle SPARC T4-2 http://docs.oracle.com/cd/E23075_01/ Oracle Solaris 11.2 http://www.oracle.com/technetwork/server-storage/solaris11/overview/index.html quadprog: Functions to solve Quadratic Programming Problems http://cran.r-project.org/web/packages/quadprog/index.html Oracle R Enterprise 1.4 ("ORE") 1.4 http://www.oracle.com/technetwork/database/options/advanced-analytics/r-enterprise/ore-downloads-1502823.html Problem: path to Solaris Studio doesn't match my installation: $ ORE CMD INSTALL quadprog_1.5-5.tar.gz * installing to library \u2018/u01/app/oracle/product/12.1.0/dbhome_1/R/library\u2019 * installing *source* package \u2018quadprog\u2019 ... ** package \u2018quadprog\u2019 successfully unpacked and MD5 sums checked ** libs /opt/SunProd/studio12u3/solarisstudio12.3/bin/f95 -m64   -PIC  -g  -c aind.f -o aind.o bash: /opt/SunProd/studio12u3/solarisstudio12.3/bin/f95: No such file or directory *** Error code 1 make: Fatal error: Command failed for target `aind.o' ERROR: compilation failed for package \u2018quadprog\u2019 * removing \u2018/u01/app/oracle/product/12.1.0/dbhome_1/R/library/quadprog\u2019 $ ls -l /opt/solarisstudio12.3/bin/f95 lrwxrwxrwx   1 root     root          15 Aug 19 17:36 /opt/solarisstudio12.3/bin/f95 -> ../prod/bin/f90 Solution: a symbolic link: $ sudo mkdir -p /opt/SunProd/studio12u3 $ sudo ln -s /opt/solarisstudio12.3 /opt/SunProd/studio12u3/ Now, it is all good: $ ORE CMD INSTALL quadprog_1.5-5.tar.gz * installing to library \u2018/u01/app/oracle/product/12.1.0/dbhome_1/R/library\u2019 * installing *source* package \u2018quadprog\u2019 ... ** package \u2018quadprog\u2019 successfully unpacked and MD5 sums checked ** libs /opt/SunProd/studio12u3/solarisstudio12.3/bin/f95 -m64   -PIC  -g  -c aind.f -o aind.o /opt/SunProd/studio12u3/solarisstudio12.3/bin/ cc -xc99 -m64 -I/usr/lib/64/R/include -DNDEBUG -KPIC  -xlibmieee  -c init.c -o init.o /opt/SunProd/studio12u3/solarisstudio12.3/bin/f95 -m64  -PIC -g  -c -o solve.QP.compact.o solve.QP.compact.f /opt/SunProd/studio12u3/solarisstudio12.3/bin/f95 -m64  -PIC -g  -c -o solve.QP.o solve.QP.f /opt/SunProd/studio12u3/solarisstudio12.3/bin/f95 -m64   -PIC  -g  -c util.f -o util.o /opt/SunProd/studio12u3/solarisstudio12.3/bin/ cc -xc99 -m64 -G -o quadprog.so aind.o init.o solve.QP.compact.o solve.QP.o util.o -xlic_lib=sunperf -lsunmath -lifai -lsunimath -lfai -lfai2 -lfsumai -lfprodai -lfminlai -lfmaxlai -lfminvai -lfmaxvai -lfui -lfsu -lsunmath -lmtsk -lm -lifai -lsunimath -lfai -lfai2 -lfsumai -lfprodai -lfminlai -lfmaxlai -lfminvai -lfmaxvai -lfui -lfsu -lsunmath -lmtsk -lm -L/usr/lib/64/R/lib -lR installing to /u01/app/oracle/product/12.1.0/dbhome_1/R/library/quadprog/libs ** R ** preparing package for lazy loading ** help *** installing help indices   converting help for package \u2018quadprog\u2019     finding HTML links ... done     solve.QP                                html      solve.QP.compact                        html  ** building package indices ** testing if installed package can be loaded * DONE (quadprog) ====== Here is an example from http://cran.r-project.org/web/packages/quadprog/quadprog.pdf > require(quadprog) > Dmat <- matrix(0,3,3) > diag(Dmat) <- 1 > dvec <- c(0,5,0) > Amat <- matrix(c(-4,-3,0,2,1,0,0,-2,1),3,3) > bvec <- c(-8,2,0) > solve.QP(Dmat,dvec,Amat,bvec=bvec) $solution [1] 0.4761905 1.0476190 2.0952381 $value [1] -2.380952 $unconstrained.solution [1] 0 5 0 $iterations [1] 3 0 $Lagrangian [1] 0.0000000 0.2380952 2.0952381 $iact [1] 3 2 Here, the standard example is modified to work with Oracle R Enterprise require(ORE) ore.connect("my-name", "my-sid", "my-host", "my-pass", 1521) ore.doEval(   function () {     require(quadprog)   } ) ore.doEval(   function () {     Dmat <- matrix(0,3,3)     diag(Dmat) <- 1     dvec <- c(0,5,0)     Amat <- matrix(c(-4,-3,0,2,1,0,0,-2,1),3,3)     bvec <- c(-8,2,0)    solve.QP(Dmat,dvec,Amat,bvec=bvec)   } ) $solution [1] 0.4761905 1.0476190 2.0952381 $value [1] -2.380952 $unconstrained.solution [1] 0 5 0 $iterations [1] 3 0 $Lagrangian [1] 0.0000000 0.2380952 2.0952381 $iact [1] 3 2 Now I can combine the quadprog compute algorithms with the Oracle R Enterprise Database engine functionality: Scale to large datasets Access to tables, views, and external tables in the database, as well as those accessible through database links Use SQL query parallel execution Use in-database statistical and data mining functionality

  Read the article

• Is software support an option for your career?

  - by Maria Sandu

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 If you have a technical background, why should you choose a career in support? We have invited Serban to answer these questions and to give us an overview of one of the biggest technical teams in Oracle Romania. He’s been with Oracle for 7 years leading the local PeopleSoft Financials & Supply Chain Support team. Back in 2013 Serban started building a new support team in Romania – Fusion HCM. His current focus is building a strong support team for Fusion HCM, latest solution for Business HR Professionals from Oracle. The solution is offered both on Premise (customer site installation) but more important as a Cloud offering – SaaS.  So, why should a technical person choose Software Support over other technical areas?  “I think it is mainly because of the high level of technical skills required to provide the best technical solutions to our customers. Oracle Software Support covers complex solutions going from Database or Middleware to a vast area of business applications (basically covering any needs that a large enterprise may have). Working with such software requires very strong skills both technical and functional for the different areas, going from Finance, Supply Chain Management, Manufacturing, Sales to other very specific business processes. Our customers are large enterprises that already have a support layer inside their organization and therefore the Oracle Technical Support Engineers are working with highly specialized staff (DBA’s, System/Application Admins, Implementation Consultants). This is a very important aspect for our engineers because they need to be highly skilled to match our customer’s specialist’s expectations”.  What’s the career path in your team? “Technical Analysts joining our teams have a clear growth path. The main focus is to become a master of the product they will support. I think one need 1 or 2 years to reach a good level of understanding the product and delivering optimal solutions because of the complexity of our products. At a later stage, engineers can choose their professional development areas based on the business needs and preferences and then further grow towards as technical expert or a management role. We have analysts that have more than 15 years of technical expertise and they still learn and grow in technical area. Important fact is, due to the expansion of the Romanian Software support center, there are various management opportunities. So, if you want to leverage your experience and if you want to have people management responsibilities Oracle Software Support is the place to be!”  Our last question to Serban was about the benefits of being part of Oracle Software Support. Here is what he said: “We believe that Oracle delivers “State of the art” Support level to our customers. This is not possible without high investment in our staff. We commit from the start to support any technical analyst that joins us (being junior or very senior) with any training needs they have for their job. We have various technical trainings as well as soft-skills trainings required for a customer facing professional to be successful in his role. Last but not least, we’re aiming to make Oracle Romania SW Support a global center of excellence which means we’re investing a lot in our employees.”  If you’re looking for a job where you can combine your strong technical skills with customer interaction Oracle Software Support is the place to be! Send us your CV at [email protected]. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• How can I estimate the entropy of a password?

  - by Wug

  Having read various resources about password strength I'm trying to create an algorithm that will provide a rough estimation of how much entropy a password has. I'm trying to create an algorithm that's as comprehensive as possible. At this point I only have pseudocode, but the algorithm covers the following: password length repeated characters patterns (logical) different character spaces (LC, UC, Numeric, Special, Extended) dictionary attacks It does NOT cover the following, and SHOULD cover it WELL (though not perfectly): ordering (passwords can be strictly ordered by output of this algorithm) patterns (spatial) Can anyone provide some insight on what this algorithm might be weak to? Specifically, can anyone think of situations where feeding a password to the algorithm would OVERESTIMATE its strength? Underestimations are less of an issue. The algorithm: // the password to test password = ? length = length(password) // unique character counts from password (duplicates discarded) uqlca = number of unique lowercase alphabetic characters in password uquca = number of uppercase alphabetic characters uqd = number of unique digits uqsp = number of unique special characters (anything with a key on the keyboard) uqxc = number of unique special special characters (alt codes, extended-ascii stuff) // algorithm parameters, total sizes of alphabet spaces Nlca = total possible number of lowercase letters (26) Nuca = total uppercase letters (26) Nd = total digits (10) Nsp = total special characters (32 or something) Nxc = total extended ascii characters that dont fit into other categorys (idk, 50?) // algorithm parameters, pw strength growth rates as percentages (per character) flca = entropy growth factor for lowercase letters (.25 is probably a good value) fuca = EGF for uppercase letters (.4 is probably good) fd = EGF for digits (.4 is probably good) fsp = EGF for special chars (.5 is probably good) fxc = EGF for extended ascii chars (.75 is probably good) // repetition factors. few unique letters == low factor, many unique == high rflca = (1 - (1 - flca) ^ uqlca) rfuca = (1 - (1 - fuca) ^ uquca) rfd = (1 - (1 - fd ) ^ uqd ) rfsp = (1 - (1 - fsp ) ^ uqsp ) rfxc = (1 - (1 - fxc ) ^ uqxc ) // digit strengths strength = ( rflca * Nlca + rfuca * Nuca + rfd * Nd + rfsp * Nsp + rfxc * Nxc ) ^ length entropybits = log_base_2(strength) A few inputs and their desired and actual entropy_bits outputs: INPUT DESIRED ACTUAL aaa very pathetic 8.1 aaaaaaaaa pathetic 24.7 abcdefghi weak 31.2 H0ley$Mol3y_ strong 72.2 s^fU¬5ü;y34G< wtf 88.9 [a^36]* pathetic 97.2 [a^20]A[a^15]* strong 146.8 xkcd1** medium 79.3 xkcd2** wtf 160.5 * these 2 passwords use shortened notation, where [a^N] expands to N a's. ** xkcd1 = "Tr0ub4dor&3", xkcd2 = "correct horse battery staple" The algorithm does realize (correctly) that increasing the alphabet size (even by one digit) vastly strengthens long passwords, as shown by the difference in entropy_bits for the 6th and 7th passwords, which both consist of 36 a's, but the second's 21st a is capitalized. However, they do not account for the fact that having a password of 36 a's is not a good idea, it's easily broken with a weak password cracker (and anyone who watches you type it will see it) and the algorithm doesn't reflect that. It does, however, reflect the fact that xkcd1 is a weak password compared to xkcd2, despite having greater complexity density (is this even a thing?). How can I improve this algorithm? Addendum 1 Dictionary attacks and pattern based attacks seem to be the big thing, so I'll take a stab at addressing those. I could perform a comprehensive search through the password for words from a word list and replace words with tokens unique to the words they represent. Word-tokens would then be treated as characters and have their own weight system, and would add their own weights to the password. I'd need a few new algorithm parameters (I'll call them lw, Nw ~= 2^11, fw ~= .5, and rfw) and I'd factor the weight into the password as I would any of the other weights. This word search could be specially modified to match both lowercase and uppercase letters as well as common character substitutions, like that of E with 3. If I didn't add extra weight to such matched words, the algorithm would underestimate their strength by a bit or two per word, which is OK. Otherwise, a general rule would be, for each non-perfect character match, give the word a bonus bit. I could then perform simple pattern checks, such as searches for runs of repeated characters and derivative tests (take the difference between each character), which would identify patterns such as 'aaaaa' and '12345', and replace each detected pattern with a pattern token, unique to the pattern and length. The algorithmic parameters (specifically, entropy per pattern) could be generated on the fly based on the pattern. At this point, I'd take the length of the password. Each word token and pattern token would count as one character; each token would replace the characters they symbolically represented. I made up some sort of pattern notation, but it includes the pattern length l, the pattern order o, and the base element b. This information could be used to compute some arbitrary weight for each pattern. I'd do something better in actual code. Modified Example: Password: 1234kitty$$$$$herpderp Tokenized: 1 2 3 4 k i t t y $ $ $ $ $ h e r p d e r p Words Filtered: 1 2 3 4 @W5783 $ $ $ $ $ @W9001 @W9002 Patterns Filtered: @P[l=4,o=1,b='1'] @W5783 @P[l=5,o=0,b='$'] @W9001 @W9002 Breakdown: 3 small, unique words and 2 patterns Entropy: about 45 bits, as per modified algorithm Password: correcthorsebatterystaple Tokenized: c o r r e c t h o r s e b a t t e r y s t a p l e Words Filtered: @W6783 @W7923 @W1535 @W2285 Breakdown: 4 small, unique words and no patterns Entropy: 43 bits, as per modified algorithm The exact semantics of how entropy is calculated from patterns is up for discussion. I was thinking something like: entropy(b) * l * (o + 1) // o will be either zero or one The modified algorithm would find flaws with and reduce the strength of each password in the original table, with the exception of s^fU¬5ü;y34G<, which contains no words or patterns.

  Read the article

• ADF Partner Community News Session - Open Invitation: "ADF as a basis of Fusion Apps - the biggest ADF project ever (in English)"

  - by Frank Nimphius

  After a successful guest performance of Ted Farrell in 2011, this year's international ADF speaker to speak during an ADF News session is Chris Muir from Oracle.  ADF News Session - Friday September 14, 8:30 AM - 9.00 AM (CET) - Topic: ADF as a basis of Fusion Apps - the biggest ADF project ever (in English) +++ this webcast will be conducted in English +++ dial-in numbers conc. ADF News Session, Sep. 14 2012 You are invited to join the next ADF News Session, that is going to take place September 14 2012 speaker:  Chris Muir / Oracle time:         8:30 AM (CET) duration:  30 minutes topic:        ADF as a basis of Fusion Apps - the biggest ADF project ever (in English) dial-in webconf: https://oraclemeetings.webex.com conf ID:      595 484 157 confkey:    123456 Please enter your name and an abbreviation of you company name when dialing in (please don´t use blanks and special characters). Please notice that this information will be visible to all participants of the webcast. Thank you. dial-in telco:           +49 (0)69 2222 16 106 or +49 (0)800 66 485 15           ConfCode: 208 503 9           SecurityPasscode: 112233  Other toll-free dial in numbers for EMEA countries are listed below (information is supplied without liability): Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} table.MsoTableGrid {mso-style-name:"Table Grid"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-priority:59; mso-style-unhide:no; border:solid windowtext 1.0pt; mso-border-alt:solid windowtext .5pt; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-border-insideh:.5pt solid windowtext; mso-border-insidev:.5pt solid windowtext; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Austria 0800005967 Belgium 080048331 Croatia 0800222323 Czech Republic 800701080 Denmark  80889099 Estonia 8000111325 Egypt 08000000213 Finland 0800112073 France 0805632866 Greece 00800127897 Hungary 0680011201 Iceland 8008779 Ireland 1800932479 Israel 1809452571 Italy 800897629 Latvia 80002397 Luxembourg 80026598 Netherlands 08000235028 Norway 80010796 Poland 8001213557 Portugal 800814990 Romania 0800895563 Russia 81080029351012 Saudi Arabia 8008444320 Slovak Republic 0800001586 Slovenia 080080466 South Africa 0800980961 Spain 800098600 Sweden 856619465 Switzerland 0800650026 Turkey 00800 44632129 Ukraine 0800500166 United Arab Emirates 8000440344 United Kingdom 08006948154  

  Read the article

< Previous Page | 307 308 309 310 311 312 313 314 315 316 317 318  | Next Page >