mr foo bar - Page 311 - Developer IT

how to check whether xml file has access or not in c#?

- by mouna

i am saving dafault values in an xml file. if i dont have access to the xml file i should show message in the status bar

Xcode save image to camera roll

I am new to Xcode (using 4.3) and am not sure how to save an image to the device's camera roll. All that I have done so far is an IBAction for the button to save the image (the button resides in the top right of the navigation bar. This tutorial (http://www.youtube.com/watch?v=sSdwjQUXA2Y) is EXACTLY what I would like to be able to do but the code is too blurry to read properly. Any help would be greatly appreciated.

Read the article

Show progress without using an image

- by Jon1

I would like to design a progress bar, without using an image (eg animated gif...). Can this be done with just html css and jquery? trying to be creative here :) Update: the progress percentage cannot be determined, so it has to be a loop

Read the article

Text extra aliased(jagged) in IE - looks terrible - but OK in FF and Chrome

- by jon

I am building a website - http://www.efficaxdevelopment.com As you can see when you load the page(in IE) the text on the page that isn't an image or the menu looks terrible, while in FF and Chrome the text looks fine. you can view the source on the page and the css is here http://www.efficaxdevelopment.com/styles/mainstyle.css Also, the sliding bar over the menu appears a few pixels left of where it appears in FF and IE. Any ideas?

Read the article

Yet another div height question

- by cf_PhillipSenn

Over the years, I've struggled with this. This year, there might be a solution. I need a header, content and footer. I would like the footer to be at the bottom of the page, the header at the top, and the content in between. I would like the content to have a scroll bar. Q: Is that too much to ask?

Read the article

Open Source or Low Cost Layer 7 ("Content") Switch?

- by Rob

I have several web servers that host a number of different applications and web sites. I want to make it easy to host apps or parts of web sites on different servers (e.g. example.com/foo might be on one physical server and example.com/bar might be on another). We do this Apache redirects right now, but that gets messy fast and in any case we have other problems we want to solve, such as throttling requests from individual clients, and reducing dependency on specific physical hosts. Is there an open source or low cost layer 7 switch that would be suitable for this sort of task? I was hoping to find something like a stripped down Linux VMware guest/appliance built for this purpose, but haven't seen anything suitable out there so far.

Read the article

Top 20 Daily Deal Sites In India

- by Damodhar

If you have never heard of Groupon recently, you probably are not working in the tech industry because it is all over the blogosphere. After all, growing from zero to US$1.35 billion valuation in 18 months is pretty AMAZING. Inspired by this, the following bunch of Groupon clone’s are already rising in India. Definitely this business model is emerging and changes the way online shopping happens in India. SnapDeal SnapDeal features a Best deals Coupons at an unbeatable price on the best stuff to do, see, eat, and buy in our city. It provides vouchers and discounts in all the major cities like Delhi, Mumbai, Chennai and Bangalore. KhojGuru Exclusive Discount coupons from hundreds of brands and retailers. These discounts can be easily downloaded as an SMS on to the mobile phone or their print out can be taken. MyDala A platform which gets us great deals in our city.Leveraging the “power of group buying”. Group buying happens when like minded people come together to get deals that we can never get on our own as individuals. SoSasta Great place which would not only tell us about the hidden treasures of our city — but also made them affordable to us at the end of the month. DealsAndYou Deals and You is a group buying portal that features a daily deal on the best stuff in some of India’s leading cities. AajKaCatch Its concept is to provide you the most unique, useful and qualitative product at a very low price. So you can now shop without the hassles of clustered products. BindassBargain Bindaas Bargain offers a new deal every day! Great stuff ranging from cool gadgets, home theatres, luxury watches, smash games. MasthiDeals It get you a great deal on a great stuff to do, eat, buy or see in your city. They have a team of about 25 wonderful people working in Chennai office working side by side with folks in MasthiDeal’s other cities. Koovs Founded by a team of IIT alumni who have brought in their expertise from the internet industry. Koovs is a Bangalore based start up and one point solution for all your desires. Taggle It brings you a variety of offers from some of the most respected brands in the country.This website uses collective buying to create a win-win for local businesses and their customers. BuzzInTown Buzzintown.com is a portal owned by Wortal Inc. There are a US headquartered company, with a presence pan-India through their India subsidiary, managed by a vastly experienced set of global leaders from the media, entertainment and technology industries. BuyThePrice It lines up the best win – win deals for both consumers and vendors and also ensures that each of the orders are dispatched in the shortest time possible. 24HoursLoot 24hoursLoot is an online store for selling a new t-shirt (sometime other products) everyday at deep discounted price in limited quantity/stock. DealMagic Customers get exposure to the best their city has to offer, at unbeatable prices (50-90% off). We never feature more than one business on our website on any given day, so we have to be very very selective on who gets featured. Dealivore ICUMI Technologies Pvt Ltd is the company operating the Dealivore service. Founded in December 2009, ICUMI is privately owned and funded. LootMore An online store that exclusively focuses on selling cool quality stuff at cheap prices. Here you’ll always find the latest and greatest brands at prices you can afford. Foodome The deals features the best coupons at an unbeatable price on restaurants, fine dining on where to spend your birthday party.They provide coupon only in Chennai as of now. Top Online Shopping Sites- Nation Wide ebay.in eBay is The World’s Online Marketplace, enabling trade on a local, national and international basis. With a diverse and passionate community of individuals and small businesses, eBay offers an online platform where millions of items are traded each day. FutureBazzar Future Group, led by its founder and Group CEO, Mr. Kishore Biyani, is one of India’s leading business houses with multiple businesses spanning across the consumption space. TradeUs Launched in July 2009 and in a short span of time it has turned into one of India’s foremost shopping portals setting the Indian e-commerce abode aflame. BigShoeBazzar (BSB) is the largest online authorized shoe store in South Asia. Croma Promoted by Infiniti Retail Ltd, a 100% subsidiary of Tata Sons.One of the world’s leading retailers, ensuring that you buy nothing but the best. This article titled,Top 20 Daily Deal Sites In India, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

Read the article

Java Logger API

- by Koppar

This is a more like a tip rather than technical write up and serves as a quick intro for newbies. The logger API helps to diagnose application level or JDK level issues at runtime. There are 7 levels which decide the detailing in logging (SEVERE, WARNING, INFO, CONFIG, FINE, FINER, FINEST). Its best to start with highest level and as we narrow down, use more detailed logging for a specific area. SEVERE is the highest and FINEST is the lowest. This may not make sense until we understand some jargon. The Logger class provides the ability to stream messages to an output stream in a format that can be controlled by the user. What this translates to is, I can create a logger with this simple invocation and use it add debug messages in my class: import java.util.logging.*; private static final Logger focusLog = Logger.getLogger("java.awt.focus.KeyboardFocusManager"); if (focusLog.isLoggable(Level.FINEST)) { focusLog.log(Level.FINEST, "Calling peer setCurrentFocusOwner}); LogManager acts like a book keeper and all the getLogger calls are forwarded to LogManager. The LogManager itself is a singleton class object which gets statically initialized on JVM start up. More on this later. If there is no existing logger with the given name, a new one is created. If there is one (and not yet GC’ed), then the existing Logger object is returned. By default, a root logger is created on JVM start up. All anonymous loggers are made as the children of the root logger. Named loggers have the hierarchy as per their name resolutions. Eg: java.awt.focus is the parent logger for java.awt.focus.KeyboardFocusManager etc. Before logging any message, the logger checks for the log level specified. If null is specified, the log level of the parent logger will be set. However, if the log level is off, no log messages would be written, irrespective of the parent’s log level. All the messages that are posted to the Logger are handled as a LogRecord object.i.e. FocusLog.log would create a new LogRecord object with the log level and message as its data members). The level of logging and thread number are also tracked. LogRecord is passed on to all the registered Handlers. Handler is basically a means to output the messages. The output may be redirected to either a log file or console or a network logging service. The Handler classes use the LogManager properties to set filters and formatters. During initialization or JVM start up, LogManager looks for logging.properties file in jre/lib and sets the properties if the file is provided. An alternate location for properties file can also be specified by setting java.util.logging.config.file system property. This can be set in Java Control Panel ? Java ? Runtime parameters as -Djava.util.logging.config.file = <mylogfile> or passed as a command line parameter java -Djava.util.logging.config.file = C:/Sunita/myLog The redirection of logging depends on what is specified rather registered as a handler with JVM in the properties file. java.util.logging.ConsoleHandler sends the output to system.err and java.util.logging.FileHandler sends the output to file. File name of the log file can also be specified. If you prefer XML format output, in the configuration file, set java.util.logging.FileHandler.formatter = java.util.logging.XMLFormatter and if you prefer simple text, set set java.util.logging.FileHandler.formatter =java.util.logging.SimpleFormatter Below is the default logging Configuration file: ############################################################ # Default Logging Configuration File # You can use a different file by specifying a filename # with the java.util.logging.config.file system property. # For example java -Djava.util.logging.config.file=myfile ############################################################ ############################################################ # Global properties ############################################################ # "handlers" specifies a comma separated list of log Handler # classes. These handlers will be installed during VM startup. # Note that these classes must be on the system classpath. # By default we only configure a ConsoleHandler, which will only # show messages at the INFO and above levels. handlers= java.util.logging.ConsoleHandler # To also add the FileHandler, use the following line instead. #handlers= java.util.logging.FileHandler, java.util.logging.ConsoleHandler # Default global logging level. # This specifies which kinds of events are logged across # all loggers. For any given facility this global level # can be overriden by a facility specific level # Note that the ConsoleHandler also has a separate level # setting to limit messages printed to the console. .level= INFO ############################################################ # Handler specific properties. # Describes specific configuration info for Handlers. ############################################################ # default file output is in user's home directory. java.util.logging.FileHandler.pattern = %h/java%u.log java.util.logging.FileHandler.limit = 50000 java.util.logging.FileHandler.count = 1 java.util.logging.FileHandler.formatter = java.util.logging.XMLFormatter # Limit the message that are printed on the console to INFO and above. java.util.logging.ConsoleHandler.level = INFO java.util.logging.ConsoleHandler.formatter = java.util.logging.SimpleFormatter ############################################################ # Facility specific properties. # Provides extra control for each logger. ############################################################ # For example, set the com.xyz.foo logger to only log SEVERE # messages: com.xyz.foo.level = SEVERE Since I primarily use this method to track focus issues, here is how I get detailed awt focus related logging. Just set the logger name to java.awt.focus.level=FINEST and change the default log level to FINEST. Below is a basic sample program. The sample programs are from http://www2.cs.uic.edu/~sloan/CLASSES/java/ and have been modified to illustrate the logging API. By changing the .level property in the logging.properties file, one can control the output written to the logs. To play around with the example, try changing the levels in the logging.properties file and notice the difference in messages going to the log file. Example --------KeyboardReader.java------------------------------------------------------------------------------------- import java.io.*; import java.util.*; import java.util.logging.*; public class KeyboardReader { private static final Logger mylog = Logger.getLogger("samples.input"); public static void main (String[] args) throws java.io.IOException { String s1; String s2; double num1, num2, product; // set up the buffered reader to read from the keyboard BufferedReader br = new BufferedReader (new InputStreamReader (System.in)); System.out.println ("Enter a line of input"); s1 = br.readLine(); if (mylog.isLoggable(Level.SEVERE)) { mylog.log (Level.SEVERE,"The line entered is " + s1); } if (mylog.isLoggable(Level.INFO)) { mylog.log (Level.INFO,"The line has " + s1.length() + " characters"); } if (mylog.isLoggable(Level.FINE)) { mylog.log (Level.FINE,"Breaking the line into tokens we get:"); } int numTokens = 0; StringTokenizer st = new StringTokenizer (s1); while (st.hasMoreTokens()) { s2 = st.nextToken(); numTokens++; if (mylog.isLoggable(Level.FINEST)) { mylog.log (Level.FINEST, " Token " + numTokens + " is: " + s2); } } } } ----------MyFileReader.java---------------------------------------------------------------------------------------- import java.io.*; import java.util.*; import java.util.logging.*; public class MyFileReader extends KeyboardReader { private static final Logger mylog = Logger.getLogger("samples.input.file"); public static void main (String[] args) throws java.io.IOException { String s1; String s2; // set up the buffered reader to read from the keyboard BufferedReader br = new BufferedReader (new FileReader ("MyFileReader.txt")); s1 = br.readLine(); if (mylog.isLoggable(Level.SEVERE)) { mylog.log (Level.SEVERE,"ATTN The line is " + s1); } if (mylog.isLoggable(Level.INFO)) { mylog.log (Level.INFO, "The line has " + s1.length() + " characters"); } if (mylog.isLoggable(Level.FINE)) { mylog.log (Level.FINE,"Breaking the line into tokens we get:"); } int numTokens = 0; StringTokenizer st = new StringTokenizer (s1); while (st.hasMoreTokens()) { s2 = st.nextToken(); numTokens++; if (mylog.isLoggable(Level.FINEST)) { mylog.log (Level.FINEST,"Breaking the line into tokens we get:"); mylog.log (Level.FINEST," Token " + numTokens + " is: " + s2); } } //end of while } // end of main } // end of class ----------MyFileReader.txt------------------------------------------------------------------------------------------ My first logging example -------logging.properties------------------------------------------------------------------------------------------- handlers= java.util.logging.ConsoleHandler, java.util.logging.FileHandler .level= FINEST java.util.logging.FileHandler.pattern = java%u.log java.util.logging.FileHandler.limit = 50000 java.util.logging.FileHandler.count = 1 java.util.logging.FileHandler.formatter = java.util.logging.SimpleFormatter java.util.logging.ConsoleHandler.level = FINEST java.util.logging.ConsoleHandler.formatter = java.util.logging.SimpleFormatter java.awt.focus.level=ALL ------Output log------------------------------------------------------------------------------------------- May 21, 2012 11:44:55 AM MyFileReader main SEVERE: ATTN The line is My first logging example May 21, 2012 11:44:55 AM MyFileReader main INFO: The line has 24 characters May 21, 2012 11:44:55 AM MyFileReader main FINE: Breaking the line into tokens we get: May 21, 2012 11:44:55 AM MyFileReader main FINEST: Breaking the line into tokens we get: May 21, 2012 11:44:55 AM MyFileReader main FINEST: Token 1 is: My May 21, 2012 11:44:55 AM MyFileReader main FINEST: Breaking the line into tokens we get: May 21, 2012 11:44:55 AM MyFileReader main FINEST: Token 2 is: first May 21, 2012 11:44:55 AM MyFileReader main FINEST: Breaking the line into tokens we get: May 21, 2012 11:44:55 AM MyFileReader main FINEST: Token 3 is: logging May 21, 2012 11:44:55 AM MyFileReader main FINEST: Breaking the line into tokens we get: May 21, 2012 11:44:55 AM MyFileReader main FINEST: Token 4 is: example Invocation command: "C:\Program Files (x86)\Java\jdk1.6.0_29\bin\java.exe" -Djava.util.logging.config.file=logging.properties MyFileReader References Further technical details are available here: http://docs.oracle.com/javase/1.4.2/docs/guide/util/logging/overview.html#1.0 http://docs.oracle.com/javase/1.4.2/docs/api/java/util/logging/package-summary.html http://www2.cs.uic.edu/~sloan/CLASSES/java/

Read the article

Why Software Sucks...and What You Can Do About It – book review

- by DigiMortal

How do our users see the products we are writing for them and how happy they are with our work? Are they able to get their work done without fighting with cool features and crashes or are they just switching off resistance part of their brain to survive our software? Yeah, the overall picture of software usability landscape is not very nice. Okay, it is not even nice. But, fortunately, Why Software Sucks...and What You Can Do About It by David S. Platt explains everything. Why Software Sucks… is book for software users but I consider it as a-must reading also for developers and specially for their managers whose politics often kills all usability topics as soon as they may appear. For managers usability is soft topic that can be manipulated the way it is best in current state of project. Although developers are not UI designers and usability experts they are still very often forced to deal with these topics and this is how usability problems start (of course, also designers are able to produce designs that are stupid and too hard to use for users, but this blog here is about development). I found this book to be very interesting and funny reading. It is not humor book but it explains you all so you remember later very well what you just read. It took me about three evenings to go through this book and I am still enjoying what I found and how author explains our weird young working field to end users. I suggest this book to all developers – while you are demanding your management to hire or outsource usability expert you are at least causing less pain to end users. So, go and buy this book, just like I did. And… they thanks to mr. Platt :) There is one book more I suggest you to read if you are interested in usability - Don't Make Me Think: A Common Sense Approach to Web Usability, 2nd Edition by Steve Krug. Editorial review from Amazon Today’s software sucks. There’s no other good way to say it. It’s unsafe, allowing criminal programs to creep through the Internet wires into our very bedrooms. It’s unreliable, crashing when we need it most, wiping out hours or days of work with no way to get it back. And it’s hard to use, requiring large amounts of head-banging to figure out the simplest operations. It’s no secret that software sucks. You know that from personal experience, whether you use computers for work or personal tasks. In this book, programming insider David Platt explains why that’s the case and, more importantly, why it doesn’t have to be that way. And he explains it in plain, jargon-free English that’s a joy to read, using real-world examples with which you’re already familiar. In the end, he suggests what you, as a typical user, without a technical background, can do about this sad state of our software—how you, as an informed consumer, don’t have to take the abuse that bad software dishes out. As you might expect from the book’s title, Dave’s expose is laced with humor—sometimes outrageous, but always dead on. You’ll laugh out loud as you recall incidents with your own software that made you cry. You’ll slap your thigh with the same hand that so often pounded your computer desk and wished it was a bad programmer’s face. But Dave hasn’t written this book just for laughs. He’s written it to give long-overdue voice to your own discovery—that software does, indeed, suck, but it shouldn’t. Table of contents Acknowledgments xiii Introduction Chapter 1: Who’re You Calling a Dummy? Where We Came From Why It Still Sucks Today Control versus Ease of Use I Don’t Care How Your Program Works A Bad Feature and a Good One Stopping the Proceedings with Idiocy Testing on Live Animals Where We Are and What You Can Do Chapter 2: Tangled in the Web Where We Came From How It Works Why It Still Sucks Today Client-Centered Design versus Server-Centered Design Where’s My Eye Opener? It’s Obvious—Not! Splash, Flash, and Animation Testing on Live Animals What You Can Do about It Chapter 3: Keep Me Safe The Way It Was Why It Sucks Today What Programmers Need to Know, but Don’t A Human Operation Budgeting for Hassles Users Are Lazy Social Engineering Last Word on Security What You Can Do Chapter 4: Who the Heck Are You? Where We Came From Why It Still Sucks Today Incompatible Requirements OK, So Now What? Chapter 5: Who’re You Looking At? Yes, They Know You Why It Sucks More Than Ever Today Users Don’t Know Where the Risks Are What They Know First Milk You with Cookies? Privacy Policy Nonsense Covering Your Tracks The Google Conundrum Solution Chapter 6: Ten Thousand Geeks, Crazed on Jolt Cola See Them in Their Native Habitat All These Geeks Who Speaks, and When, and about What Selling It The Next Generation of Geeks—Passing It On Chapter 7: Who Are These Crazy Bastards Anyway? Homo Logicus Testosterone Poisoning Control and Contentment Making Models Geeks and Jocks Jargon Brains and Constraints Seven Habits of Geeks Chapter 8: Microsoft: Can’t Live With ’Em and Can’t Live Without ’Em They Run the World Me and Them Where We Came From Why It Sucks Today Damned if You Do, Damned if You Don’t We Love to Hate Them Plus ça Change Growing-Up Pains What You Can Do about It The Last Word Chapter 9: Doing Something About It 1. Buy 2. Tell 3. Ridicule 4. Trust 5. Organize Epilogue About the Author

Read the article

Can't run init script on boot after another init script

- by Colin McQueen

I have three init scripts and the Broker init script runs fine, but when I try to run the Consumer init script and then the Data Collector init script, the only process that is running is the Broker. I added the symbolic links to the run levels using update-rc.d for each script and I also changed the number prefixes in the symbolic links to try and run the scripts in the proper order but that did not work. I am able to run the scripts from the terminal and they work fine but they need to all be started on boot. Any ideas as to why my other scripts are not running? Also inside my Consumer and Data Collector I am running: su user1 -c 'java -jar foo.jar' to start the services. Also the Consumer Java class sits and waits for a message from the queue, so the Java code does not stop until I specify the stop argument for the init script. The Broker has to start first, then the Consumer, then the Data Collector. Adding the symbolic links for the runlevels: sudo update-rc.d Broker defaults 10 90 sudo update-rc.d Consumer defaults 15 85 sudo update-rc.d DataCollector defaults 20 80

Read the article

An Alphabet of Eponymous Aphorisms, Programming Paradigms, Software Sayings, Annoying Alliteration

- by Brian Schroer

Malcolm Anderson blogged about “Einstein’s Razor” yesterday, which reminded me of my favorite software development “law”, the name of which I can never remember. It took much Wikipedia-ing to find it (Hofstadter’s Law – see below), but along the way I compiled the following list: Amara’s Law: We tend to overestimate the effect of a technology in the short run and underestimate the effect in the long run. Brook’s Law: Adding manpower to a late software project makes it later. Clarke’s Third Law: Any sufficiently advanced technology is indistinguishable from magic. Law of Demeter: Each unit should only talk to its friends; don't talk to strangers. Einstein’s Razor: “Make things as simple as possible, but not simpler” is the popular paraphrase, but what he actually said was “It can scarcely be denied that the supreme goal of all theory is to make the irreducible basic elements as simple and as few as possible without having to surrender the adequate representation of a single datum of experience”, an overly complicated quote which is an obvious violation of Einstein’s Razor. (You can tell by looking at a picture of Einstein that the dude was hardly an expert on razors or other grooming apparati.) Finagle's Law of Dynamic Negatives: Anything that can go wrong, will—at the worst possible moment. - O'Toole's Corollary: The perversity of the Universe tends towards a maximum. Greenspun's Tenth Rule: Any sufficiently complicated C or Fortran program contains an ad hoc, informally-specified, bug-ridden, slow implementation of half of Common Lisp. (Morris’s Corollary: “…including Common Lisp”) Hofstadter's Law: It always takes longer than you expect, even when you take into account Hofstadter's Law. Issawi’s Omelet Analogy: One cannot make an omelet without breaking eggs - but it is amazing how many eggs one can break without making a decent omelet. Jackson’s Rules of Optimization: Rule 1: Don't do it. Rule 2 (for experts only): Don't do it yet. Kaner’s Caveat: A program which perfectly meets a lousy specification is a lousy program. Liskov Substitution Principle (paraphrased): Functions that use pointers or references to base classes must be able to use objects of derived classes without knowing it Mason’s Maxim: Since human beings themselves are not fully debugged yet, there will be bugs in your code no matter what you do. Nils-Peter Nelson’s Nil I/O Rule: The fastest I/O is no I/O. Occam's Razor: The simplest explanation is usually the correct one. Parkinson’s Law: Work expands so as to fill the time available for its completion. Quentin Tarantino’s Pie Principle: “…you want to go home have a drink and go and eat pie and talk about it.” (OK, he was talking about movies, not software, but I couldn’t find a “Q” quote about software. And wouldn’t it be cool to write a program so great that the users want to eat pie and talk about it?) Raymond’s Rule: Computer science education cannot make anybody an expert programmer any more than studying brushes and pigment can make somebody an expert painter. Sowa's Law of Standards: Whenever a major organization develops a new system as an official standard for X, the primary result is the widespread adoption of some simpler system as a de facto standard for X. Turing’s Tenet: We shall do a much better programming job, provided we approach the task with a full appreciation of its tremendous difficulty, provided that we respect the intrinsic limitations of the human mind and approach the task as very humble programmers. Udi Dahan’s Race Condition Rule: If you think you have a race condition, you don’t understand the domain well enough. These rules didn’t exist in the age of paper, there is no reason for them to exist in the age of computers. When you have race conditions, go back to the business and find out actual rules. Van Vleck’s Kvetching: We know about as much about software quality problems as they knew about the Black Plague in the 1600s. We've seen the victims' agonies and helped burn the corpses. We don't know what causes it; we don't really know if there is only one disease. We just suffer -- and keep pouring our sewage into our water supply. Wheeler’s Law: All problems in computer science can be solved by another level of indirection... Except for the problem of too many layers of indirection. Wheeler also said “Compatibility means deliberately repeating other people's mistakes.”. The Wrong Road Rule of Mr. X (anonymous): No matter how far down the wrong road you've gone, turn back. Yourdon’s Rule of Two Feet: If you think your management doesn't know what it's doing or that your organisation turns out low-quality software crap that embarrasses you, then leave. Zawinski's Law of Software Envelopment: Every program attempts to expand until it can read mail. Zawinski is also responsible for “Some people, when confronted with a problem, think 'I know, I'll use regular expressions.' Now they have two problems.” He once commented about X Windows widget toolkits: “Using these toolkits is like trying to make a bookshelf out of mashed potatoes.”

Read the article

BPM Suite 11gR1 Released

- by Manoj Das

This morning (April 27th, 2010), Oracle BPM Suite 11gR1 became available for download from OTN and eDelivery. If you have been following our plans in this area, you know that this is the release unifying BEA ALBPM product, which became Oracle BPM10gR3, with the Oracle stack. Some of the highlights of this release are: BPMN 2.0 modeling and simulation Web based Process Composer for BPMN and Rules authoring Zero-code environment with full access to Oracle SOA Suite’s rich set of application and other adapters Process Spaces – Out-of-box integration with Web Center Suite Process Analytics – Native process cubes as well as integration with Oracle BAM You can learn more about this release from the documentation. Notes about downloading and installing Please note that Oracle BPM Suite 11gR1 is delivered and installed as part of SOA 11.1.1.3.0, which is a sparse release (only incremental patch). To install: Download and install SOA 11.1.1.2.0, which is a full release (you can find the bits at the above location) Download and install SOA 11.1.1.3.0 During configure step (using the Fusion Middleware configuration wizard), use the Oracle Business Process Management template supplied with the SOA Suite11g (11.1.1.3.0) If you plan to use Process Spaces, also install Web Center 11.1.1.3.0, which also is delivered as a sparse release and needs to be installed on top of Web Center 11.1.1.2.0 Some early feedback We have been receiving very encouraging feedback on this release. Some quotes from partners are included below: “I just attended a preview workshop on BPM Studio, Oracle's BPMN 2.0 tool, held by Clemens Utschig Utschig from Oracle HQ. The usability and ease to get started are impressive. In the business view analysts can intuitively start modeling, then developers refine in their own, more technical view. The BPM Studio sets itself apart from pure play BPMN 2.0 tools by being seamlessly integrated inside a holistic SOA / BPM toolset: BPMN models are placed in SCA-Composites in SOA Suite 11g. This allows to abstract away the complexities of SOA integration aspects from business process aspects. For UIs in BPMN tasks, you have the richness of ADF 11g based Frontends. With BPM Studio we architects have a new modeling and development IDE that gives us interesting design challenges to grasp and elaborate, since many things BPMN 2.0 are different from good ol' BPEL. For example, for simple transformations, you don't use BPEL "assign" any more, but add the transformation directly to the service call. There is much less XPath involved. And, there is no translation from model to BPEL code anymore, so the awkward process model to BPEL roundtrip, which never really worked as well as it looked on marketing slides, is obsolete: With BPMN 2.0 "the model is the code". Now, these are great times to start the journey into BPM! Some tips: Start Projects smoothly, with initial processes being not overly complex and not using the more esoteric areas of BPMN, to manage the learning path and to stay successful with each iteration. Verify non functional requirements by conducting performance and load tests early. As mentioned above, separate all technical integration logic into SOA Suite or Oracle Service Bus. And - share your experience!” Hajo Normann, SOA Architect - Oracle ACE Director - Co-Leader DOAG SIG SOA "Reuse of components across the Oracle 11G Fusion Middleware stack, like for instance a Database Adapter, is essential. It improves stability and predictability of the solution. BPM just is one of the components plugging into the stack and reuses all other components." Mr. Leon Smiers, Oracle Solution Architect, Capgemini “I had the opportunity to follow a hands-on workshop held by Clemens for Oracle partners and I was really impressed of the overall offering of BPM11g. BPM11g allows the execution of BPMN 2.0 processes, without having to transform/translate them first to BPEL in order to be executable. The fact that BPMN uses the same underlying service infrastructure of SOA Suite 11g has a lot of benefits for us already familiar with SOA Suite 11g. BPMN is just another SCA component within a SCA composite and can (re)use all the existing components like Rules, Human Workflow, Adapters and Mediator. I also like the fact that BPMN runs on the same service engine as BPEL. By that all known best practices for making a BPEL process reliable are valid for BPMN processes as well. Last but not least, BPMN is integrated into the superior end-to-end tracing of SOA Suite 11g. With BPM11g, Oracle offers a very competitive product which will have a big effect on the IT market. Clemens and Jürgen: Thanks for the great workshop! I’m really looking forward to my first project using Oracle BPM11g!” Guido Schmutz, Technology Manager / Oracle ACE Director for Fusion Middleware and SOA, Company: Trivadis Some earlier feedback were summarized in this post.

Read the article

VSNewFile: A Visual Studio Addin to More Easily Add New Items to a Project

- by InfinitiesLoop

My first Visual Studio Add-in! Creating add-ins is pretty simple, once you get used to the CommandBar model it is using, which is apparently a general Office suite extensibility mechanism. Anyway, let me first explain my motivation for this. It started out as an academic exercise, as I have always wanted to dip my feet in a little VS extensibility. But I thought of a legitimate need for an add-in, at least in my personal experience, so it took on new life. But I figured I can’t be the only one who has felt this way, so I decided to publish the add-in, and host it on GitHub (VSNewFile on GitHub) hoping to spur contributions. Adding Files the Built-in Way Here’s the problem I wanted to solve. You’re working on a project, and it’s time to add a new file to the project. Whatever it is – a class, script, html page, aspx page, or what-have-you, you go through a menu or keyboard shortcut to get to the “Add New Item” dialog. Typically, you do it by right-clicking the location where you want the file (the project or a folder of it): This brings up a dialog the contains, well, every conceivable type of item you might want to add. It’s all the available item templates, which can result in anywhere from a ton to a veritable sea of choices. To be fair, this dialog has been revamped in Visual Studio 2010, which organizes it a little better than Visual Studio 2008, and adds a search box. It also loads noticeably faster. To me, this dialog is just getting in my way. If I want to add a JavaScript script to my project, I don’t want to have to hunt for the script template item in this dialog. Yes, it is categorized, and yes, it now has a search box. But still, all this UI to swim through when all I need is a new file in the project. I will name it. I will provide the content, I don’t even need a ‘template’. VS kind of realizes this. In the add menu in a class library project, for example, there is a “Add Class…” choice. But all this really does is select that project item from the dialog by default. You still must wait for the dialog, see it, and type in a name for the file. How is that really any different than hitting F2 on an existing item? It isn’t. Adding Files the Hack Way What I often find myself doing, just to avoid going through this dialog, is to copy and paste an existing file, rename it, then “CTRL-A, DEL” the content. In a few short keystrokes I’ve got my new file. Even if the original file wasn’t the right type, it doesn’t matter – I will rename it anyway, including the extension. It works well enough if the place I am adding the file to doesn’t have much in it already. But if there are a lot of files at that level, it sucks, because the new file will have the name “Copy of xyz”, causing it to be moved into the ‘C’ section of the alphabetically sorted items, which might be far, far away from the original file (and so I tend to try and copy a file that starts with ‘C’ *evil grin*). Using ‘Export Template’ To be completely fair I should at least mention this feature. I’m not even sure if this is new in VS 2010 or not (I think so). But it allows you to export a project item or items, including potential project references required by it. Then it becomes a new item in the available ‘installed templates’. No doubt this is useful to help bootstrap new projects. But that still requires you to go through the ‘New Item’ dialog. Adding Files with VSNewFile So hopefully I have sufficiently defined the problem and got a few of you to think, “Yeah, me too!”… What VSNewFile does is let you skip the dialog entirely by adding project items directly to the context menu. But it does a bit more than that, so do read on. For example, to add a new class, you can right-click the location and pick that option. A new .cs file is instantly added to the project, and the new item is selected and put into the ‘rename’ mode immediately. The default items available are shown here. But you can customize them. You can also customize the content of each template. To do so, you create a directory in your documents folder, ‘VSNewFile Templates’. In there, you drop the templates you want to use, but you name them in a particular way. For example, here’s a template that will add a new item named “Add TITLE”. It will add a project item named “SOMEFILE.foo” (or ‘SOMEFILE1.foo’ if that exists, etc). The format of the file name is: <ORDER>_<KEY>_<BASE FILENAME>_<ICON ID>_<TITLE>.<EXTENTION> Where: <ORDER> is a number that lets you determine the order of the items in the menu (relative to each other). <KEY> is a case sensitive identifier different for each template item. More on that later. <BASE FILENAME> is the default name of the file, which doesn’t matter that much, since they will be renaming it anyway. <ICON ID> is a number the dictates the icon used for the menu item. There are a huge number of built-in choices. More on that later. <TITLE> is the string that will appear in the menu. And, the contents of the file are the default content for the item (the ‘template’). The content of the file can contain anything you want, of course. But it also supports two tokens: %NAMESPACE% and %FILENAME%, which will be replaced with the corresponding values. Here is the content of this sample: testing Namespace = %NAMESPACE% Filename = %FILENAME% I kind went back and forth on this. I could have made it so there’d be an XML or JSON file that defines the templates, instead of cramming all this data into the filename itself. I like the simplicity of this better. It makes it easy to customize since you can literally just throw these files around, copy them from someone else, etc, without worrying about merge data into a central description file, in whatever format. Here’s our new item showing up: Practical Use One immediate thing I am using this for is to make it easier to add very commonly used scripts to my web projects. For example, uh, say, jQuery? :) All I need to do is drop jQuery-1.4.2.js and jQuery-1.4.2.min.js into the templates folder, provide the order, title, etc, and then instantly, I can now add jQuery to any project I have without even thinking about “where is jQuery? Can I copy it from that other project?” Using the KEY There are two reasons for the ‘key’ portion of the item. First, it allows you to turn off the built-in, default templates, which are: FILE = Add File (generic, empty file) VB = Add VB Class CS = Add C# Class (includes some basic usings) HTML = Add HTML page (includes basic structure, doctype, etc) JS = Add Script (includes an immediately-invoking function closure) To turn one off, just include a file with the name “_<KEY>”. For example, to turn off all the items except our custom one, you do this: The other reason for the key is that there are new Visual Studio Commands created for each one. This makes it possible to bind a keyboard shortcut to one of them. So you could, for example, have a keyboard combination that adds a new web page to your website, or a new CS class to your class library, etc. Here is our sample item showing up in the keyboard bindings option. Even though the contents of the template directory may change from one launch of Visual Studio to the next, the bindings will remain attached to any item with a particular key, thanks to it taking care not to lose keyboard bindings even though the commands are completely recreated each time. The Icon Face ID Visual Studio uses a Microsoft Office style add-in mechanism, I gather. There are a predetermined set of built-in icons available. You can use your own icons when developing add-ins, of course, but I’m no designer. I just wanted to find appropriate-ish icons for the built-in templates, and allow you to choose from an existing built-in icon for your own. Unfortunately, there isn’t a lot out there on the interwebs that helps you figure out what the built-in types are. There’s an MSDN article that describes at length a way to create a program that lists all the icons. But I don’t want to write a program to figure them out! Just show them to me! Sheesh :) Thankfully, someone out there felt the same way, and uses a novel hack to get the icons to show up in an outlook toolbar. He then painstakingly took screenshots of them, one group at a time. It isn’t complete though – there are tens of thousands of icons. But it’s good enough. If anyone has an exhaustive list, please let me, and the rest of the add-in community know. Icon Face ID Reference Installing the Add-in It will work with Visual Studio 2008 and Visual Studio 2010. Just unzip the release into your Documents\Visual Studio 20xx\Addins folder. It contains the binary and the Visual Studio “.addin” file. For example, the path to mine is: C:\Users\InfinitiesLoop\Documents\Visual Studio 2010\Addins Conclusion So that’s it! I hope you find it as useful as I have. It’s on GitHub, so if you’re into this kind of thing, please do fork it and improve it! Reference: VSNewFile on GitHub VSNewFile release on GitHub Icon Face ID Reference

Read the article

Integrating NetBeans for Raspberry Pi Java Development

- by speakjava

Raspberry Pi IDE Java Development The Raspberry Pi is an incredible device for building embedded Java applications but, despite being able to run an IDE on the Pi it really pushes things to the limit. It's much better to use a PC or laptop to develop the code and then deploy and test on the Pi. What I thought I'd do in this blog entry was to run through the steps necessary to set up NetBeans on a PC for Java code development, with automatic deployment to the Raspberry Pi as part of the build process. I will assume that your starting point is a Raspberry Pi with an SD card that has one of the latest Raspbian images on it. This is good because this now includes the JDK 7 as part of the distro, so no need to download and install a separate JDK. I will also assume that you have installed the JDK and NetBeans on your PC. These can be downloaded here. There are numerous approaches you can take to this including mounting the file system from the Raspberry Pi remotely on your development machine. I tried this and I found that NetBeans got rather upset if the file system disappeared either through network interruption or the Raspberry Pi being turned off. The following method uses copying over SSH, which will fail more gracefully if the Pi is not responding. Step 1: Enable SSH on the Raspberry Pi To run the Java applications you create you will need to start Java on the Raspberry Pi with the appropriate class name, classpath and parameters. For non-JavaFX applications you can either do this from the Raspberry Pi desktop or, if you do not have a monitor connected through a remote command line. To execute the remote command line you need to enable SSH (a secure shell login over the network) and connect using an application like PuTTY. You can enable SSH when you first boot the Raspberry Pi, as the raspi-config program runs automatically. You can also run it at any time afterwards by running the command: sudo raspi-config This will bring up a menu of options. Select '8 Advanced Options' and on the next screen select 'A$ SSH'. Select 'Enable' and the task is complete. Step 2: Configure Raspberry Pi Networking By default, the Raspbian distribution configures the ethernet connection to use DHCP rather than a static IP address. You can continue to use DHCP if you want, but to avoid having to potentially change settings whenever you reboot the Pi using a static IP address is simpler. To configure this on the Pi you need to edit the /etc/network/interfaces file. You will need to do this as root using the sudo command, so something like sudo vi /etc/network/interfaces. In this file you will see this line: iface eth0 inet dhcp This needs to be changed to the following: iface eth0 inet static address 10.0.0.2 gateway 10.0.0.254 netmask 255.255.255.0 You will need to change the values in red to an appropriate IP address and to match the address of your gateway. Step 3: Create a Public-Private Key Pair On Your Development Machine How you do this will depend on which Operating system you are using: Mac OSX or Linux Run the command: ssh-keygen -t rsa Press ENTER/RETURN to accept the default destination for saving the key. We do not need a passphrase so simply press ENTER/RETURN for an empty one and once more to confirm. The key will be created in the file .ssh/id_rsa.pub in your home directory. Display the contents of this file using the cat command: cat ~/.ssh/id_rsa.pub Open a window, SSH to the Raspberry Pi and login. Change directory to .ssh and edit the authorized_keys file (don't worry if the file does not exist). Copy and paste the contents of the id_rsa.pub file to the authorized_keys file and save it. Windows Since Windows is not a UNIX derivative operating system it does not include the necessary key generating software by default. To generate the key I used puttygen.exe which is available from the same site that provides the PuTTY application, here. Download this and run it on your Windows machine. Follow the instructions to generate a key. I remove the key comment, but you can leave that if you want. Click "Save private key", confirm that you don't want to use a passphrase and select a filename and location for the key. Copy the public key from the part of the window marked, "Public key for pasting into OpenSSH authorized_keys file". Use PuTTY to connect to the Raspberry Pi and login. Change directory to .ssh and edit the authorized_keys file (don't worry if this does not exist). Paste the key information at the end of this file and save it. Logout and then start PuTTY again. This time we need to create a saved session using the private key. Type in the IP address of the Raspberry Pi in the "Hostname (or IP address)" field and expand "SSH" under the "Connection" category. Select "Auth" (see the screen shot below). Click the "Browse" button under "Private key file for authentication" and select the file you saved from puttygen. Go back to the "Session" category and enter a short name in the saved sessions field, as shown below. Click "Save" to save the session. Step 4: Test The Configuration You should now have the ability to use scp (Mac/Linux) or pscp.exe (Windows) to copy files from your development machine to the Raspberry Pi without needing to authenticate by typing in a password (so we can automate the process in NetBeans). It's a good idea to test this using something like: scp /tmp/foo [email protected]:/tmp on Linux or Mac or pscp.exe foo pi@raspi:/tmp on Windows (Note that we use the saved configuration name instead of the IP address or hostname so the public key is picked up). pscp.exe is another tool available from the creators of PuTTY. Step 5: Configure the NetBeans Build Script Start NetBeans and create a new project (or open an existing one that you want to deploy automatically to the Raspberry Pi). Select the Files tab in the explorer window and expand your project. You will see a build.xml file. Double click this to edit it. This file will mostly be comments. At the end (but within the </project> tag) add the XML for <target name="-post-jar">, shown below Here's the code again in case you want to use cut-and-paste: <target name="-post-jar"> <echo level="info" message="Copying dist directory to remote Pi"/> <exec executable="scp" dir="${basedir}"> <arg line="-r"/> <arg value="dist"/> <arg value="[email protected]:NetBeans/CopyTest"/> </exec> </target> For Windows it will be slightly different: <target name="-post-jar"> <echo level="info" message="Copying dist directory to remote Pi"/> <exec executable="C:\pi\putty\pscp.exe" dir="${basedir}"> <arg line="-r"/> <arg value="dist"/> <arg value="pi@raspi:NetBeans/CopyTest"/> </exec> </target> You will also need to ensure that pscp.exe is in your PATH (or specify a fully qualified pathname). From now on when you clean and build the project the dist directory will automatically be copied to the Raspberry Pi ready for testing.

Read the article

JavaScript local alias pattern

- by Bertrand Le Roy

Here’s a little pattern that is fairly common from JavaScript developers but that is not very well known from C# developers or people doing only occasional JavaScript development. In C#, you can use a “using” directive to create aliases of namespaces or bring them to the global scope: namespace Fluent.IO { using System; using System.Collections; using SystemIO = System.IO; In JavaScript, the only scoping construct there is is the function, but it can also be used as a local aliasing device, just like the above using directive: (function($, dv) { $("#foo").doSomething(); var a = new dv("#bar"); })(jQuery, Sys.UI.DataView); This piece of code is making the jQuery object accessible using the $ alias throughout the code that lives inside of the function, without polluting the global scope with another variable. The benefit is even bigger for the dv alias which stands here for Sys.UI.DataView: think of the reduction in file size if you use that one a lot or about how much less you’ll have to type… I’ve taken the habit of putting almost all of my code, even page-specific code, inside one of those closures, not just because it keeps the global scope clean but mostly because of that handy aliasing capability.

Read the article

What groupware/project-management apps (preferably self-hosted webapp) do you recommend for a small dev shop?

- by HedgeMage

I run a small Drupal consulting shop and we've been trying different groupware solutions for what seems like ages, yet nothing we've found seems to be a good fit. We don't need CRM-overkill such as SugarCRM offers -- it's just too much for our small size. We do need git integration (at a minimum, an easy way to associate commits with issues) Time tracking on configurable or 15m increments per-project issue tracking billing (incl. recurring billing for support contracts, etc) some sort of per-project notes/wiki for things like login credentials, client contact info, etc. Contact logging (Client foo called at 2:20pm and asked to add bar to the spec, signed addendum with pricing due to client NLT CoB today, to be returned by CoB tomorrow) Open source solutions are greatly preferred to closed ones Most of all, it should be very efficient to use. Several solutions just fell out of use here because they required too many clicks for simple, frequent tasks like logging time spent on an issue or noting a call from a client. It shouldn't take 20 minutes to make a note. Edit: I almost forgot to mention: we're a mixed Linux/Mac shop with no Windows users.

Read the article

BIND9 server not responding to external queries

- by Twitchy

I have set up a BIND server on my dedicated box which I want to host a nameserver for my domain on. When I use dig @202.169.196.59 nzserver.co.nz locally on the server I get the following response... ; <<>> DiG 9.8.1-P1 <<>> @202.169.196.59 nzserver.co.nz ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 43773 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 2, ADDITIONAL: 2 ;; QUESTION SECTION: ;nzserver.co.nz. IN A ;; ANSWER SECTION: nzserver.co.nz. 3600 IN A 202.169.196.59 ;; AUTHORITY SECTION: nzserver.co.nz. 3600 IN NS ns2.nzserver.co.nz. nzserver.co.nz. 3600 IN NS ns1.nzserver.co.nz. ;; ADDITIONAL SECTION: ns1.nzserver.co.nz. 3600 IN A 202.169.196.59 ns2.nzserver.co.nz. 3600 IN A 202.169.196.59 ;; Query time: 0 msec ;; SERVER: 202.169.196.59#53(202.169.196.59) ;; WHEN: Sat Oct 27 15:40:45 2012 ;; MSG SIZE rcvd: 116 Which is good, and is the output I want. But when simply using dig nzserver.co.nz I get... ; <<>> DiG 9.8.1-P1 <<>> nzserver.co.nz ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 16970 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;nzserver.co.nz. IN A ;; Query time: 308 msec ;; SERVER: 202.169.192.61#53(202.169.192.61) ;; WHEN: Sat Oct 27 17:09:12 2012 ;; MSG SIZE rcvd: 32 And if I use dig @202.169.196.59 nzserver.co.nz on another linux machine I get... ; <<>> DiG 9.7.3 <<>> @202.169.196.59 nzserver.co.nz ; (1 server found) ;; global options: +cmd ;; connection timed out; no servers could be reached Am I doing something wrong here? Port 53 is definitely open. /etc/bind/named.conf.options options { directory "/var/cache/bind"; forwarders { 202.169.192.61; 202.169.206.10; }; listen-on { 202.169.196.59; }; }; /etc/bind/named.conf.local zone "nzserver.co.nz" { type master; file "/etc/bind/nzserver.co.nz.zone"; }; /etc/bind/nzserver.co.nz.zone ; BIND db file for nzserver.co.nz $ORIGIN nzserver.co.nz. @ IN SOA ns1.nzserver.co.nz. mr.steven.french.gmail.com. ( 2012102606 28800 7200 864000 3600 ) NS ns1.nzserver.co.nz. NS ns2.nzserver.co.nz. MX 10 mail.nzserver.co.nz. @ IN A 202.169.196.59 * IN A 202.169.196.59 ns1 IN A 202.169.196.59 ns2 IN A 202.169.196.59 www IN A 202.169.196.59 mail IN A 202.169.196.59

Read the article

Building Simple Workflows in Oozie

- by dan.mcclary

Introduction More often than not, data doesn't come packaged exactly as we'd like it for analysis. Transformation, match-merge operations, and a host of data munging tasks are usually needed before we can extract insights from our Big Data sources. Few people find data munging exciting, but it has to be done. Once we've suffered that boredom, we should take steps to automate the process. We want codify our work into repeatable units and create workflows which we can leverage over and over again without having to write new code. In this article, we'll look at how to use Oozie to create a workflow for the parallel machine learning task I described on Cloudera's site. Hive Actions: Prepping for Pig In my parallel machine learning article, I use data from the National Climatic Data Center to build weather models on a state-by-state basis. NCDC makes the data freely available as gzipped files of day-over-day observations stretching from the 1930s to today. In reading that post, one might get the impression that the data came in a handy, ready-to-model files with convenient delimiters. The truth of it is that I need to perform some parsing and projection on the dataset before it can be modeled. If I get more observations, I'll want to retrain and test those models, which will require more parsing and projection. This is a good opportunity to start building up a workflow with Oozie. I store the data from the NCDC in HDFS and create an external Hive table partitioned by year. This gives me flexibility of Hive's query language when I want it, but let's me put the dataset in a directory of my choosing in case I want to treat the same data with Pig or MapReduce code. CREATE EXTERNAL TABLE IF NOT EXISTS historic_weather(column 1, column2) PARTITIONED BY (yr string) STORED AS ... LOCATION '/user/oracle/weather/historic'; As new weather data comes in from NCDC, I'll need to add partitions to my table. That's an action I should put in the workflow. Similarly, the weather data requires parsing in order to be useful as a set of columns. Because of their long history, the weather data is broken up into fields of specific byte lengths: x bytes for the station ID, y bytes for the dew point, and so on. The delimiting is consistent from year to year, so writing SerDe or a parser for transformation is simple. Once that's done, I want to select columns on which to train, classify certain features, and place the training data in an HDFS directory for my Pig script to access. ALTER TABLE historic_weather ADD IF NOT EXISTS PARTITION (yr='2010') LOCATION '/user/oracle/weather/historic/yr=2011'; INSERT OVERWRITE DIRECTORY '/user/oracle/weather/cleaned_history' SELECT w.stn, w.wban, w.weather_year, w.weather_month, w.weather_day, w.temp, w.dewp, w.weather FROM ( FROM historic_weather SELECT TRANSFORM(...) USING '/path/to/hive/filters/ncdc_parser.py' as stn, wban, weather_year, weather_month, weather_day, temp, dewp, weather ) w; Since I'm going to prepare training directories with at least the same frequency that I add partitions, I should also add that to my workflow. Oozie is going to invoke these Hive actions using what's somewhat obviously referred to as a Hive action. Hive actions amount to Oozie running a script file containing our query language statements, so we can place them in a file called weather_train.hql. Starting Our Workflow Oozie offers two types of jobs: workflows and coordinator jobs. Workflows are straightforward: they define a set of actions to perform as a sequence or directed acyclic graph. Coordinator jobs can take all the same actions of Workflow jobs, but they can be automatically started either periodically or when new data arrives in a specified location. To keep things simple we'll make a workflow job; coordinator jobs simply require another XML file for scheduling. The bare minimum for workflow XML defines a name, a starting point, and an end point: <workflow-app name="WeatherMan" xmlns="uri:oozie:workflow:0.1"> <start to="ParseNCDCData"/> <end name="end"/> </workflow-app> To this we need to add an action, and within that we'll specify the hive parameters Also, keep in mind that actions require <ok> and <error> tags to direct the next action on success or failure. <action name="ParseNCDCData"> <hive xmlns="uri:oozie:hive-action:0.2"> <job-tracker>localhost:8021</job-tracker> <name-node>localhost:8020</name-node> <configuration> <property> <name>oozie.hive.defaults</name> <value>/user/oracle/weather_ooze/hive-default.xml</value> </property> </configuration> <script>ncdc_parse.hql</script> </hive> <ok to="WeatherMan"/> <error to="end"/> </action> There are a couple of things to note here: I have to give the FQDN (or IP) and port of my JobTracker and NameNode. I have to include a hive-default.xml file. I have to include a script file. The hive-default.xml and script file must be stored in HDFS That last point is particularly important. Oozie doesn't make assumptions about where a given workflow is being run. You might submit workflows against different clusters, or have different hive-defaults.xml on different clusters (e.g. MySQL or Postgres-backed metastores). A quick way to ensure that all the assets end up in the right place in HDFS is just to make a working directory locally, build your workflow.xml in it, and copy the assets you'll need to it as you add actions to workflow.xml. At this point, our local directory should contain: workflow.xml hive-defaults.xml (make sure this file contains your metastore connection data) ncdc_parse.hql Adding Pig to the Ooze Adding our Pig script as an action is slightly simpler from an XML standpoint. All we do is add an action to workflow.xml as follows: <action name="WeatherMan"> <pig> <job-tracker>localhost:8021</job-tracker> <name-node>localhost:8020</name-node> <script>weather_train.pig</script> </pig> <ok to="end"/> <error to="end"/> </action> Once we've done this, we'll copy weather_train.pig to our working directory. However, there's a bit of a "gotcha" here. My pig script registers the Weka Jar and a chunk of jython. If those aren't also in HDFS, our action will fail from the outset -- but where do we put them? The Jython script goes into the working directory at the same level as the pig script, because pig attempts to load Jython files in the directory from which the script executes. However, that's not where our Weka jar goes. While Oozie doesn't assume much, it does make an assumption about the Pig classpath. Anything under working_directory/lib gets automatically added to the Pig classpath and no longer requires a REGISTER statement in the script. Anything that uses a REGISTER statement cannot be in the working_directory/lib directory. Instead, it needs to be in a different HDFS directory and attached to the pig action with an <archive> tag. Yes, that's as confusing as you think it is. You can get the exact rules for adding Jars to the distributed cache from Oozie's Pig Cookbook. Making the Workflow Work We've got a workflow defined and have collected all the components we'll need to run. But we can't run anything yet, because we still have to define some properties about the job and submit it to Oozie. We need to start with the job properties, as this is essentially the "request" we'll submit to the Oozie server. In the same working directory, we'll make a file called job.properties as follows: nameNode=hdfs://localhost:8020 jobTracker=localhost:8021 queueName=default weatherRoot=weather_ooze mapreduce.jobtracker.kerberos.principal=foo dfs.namenode.kerberos.principal=foo oozie.libpath=${nameNode}/user/oozie/share/lib oozie.wf.application.path=${nameNode}/user/${user.name}/${weatherRoot} outputDir=weather-ooze While some of the pieces of the properties file are familiar (e.g., JobTracker address), others take a bit of explaining. The first is weatherRoot: this is essentially an environment variable for the script (as are jobTracker and queueName). We're simply using them to simplify the directives for the Oozie job. The oozie.libpath pieces is extremely important. This is a directory in HDFS which holds Oozie's shared libraries: a collection of Jars necessary for invoking Hive, Pig, and other actions. It's a good idea to make sure this has been installed and copied up to HDFS. The last two lines are straightforward: run the application defined by workflow.xml at the application path listed and write the output to the output directory. We're finally ready to submit our job! After all that work we only need to do a few more things: Validate our workflow.xml Copy our working directory to HDFS Submit our job to the Oozie server Run our workflow Let's do them in order. First validate the workflow: oozie validate workflow.xml Next, copy the working directory up to HDFS: hadoop fs -put working_dir /user/oracle/working_dir Now we submit the job to the Oozie server. We need to ensure that we've got the correct URL for the Oozie server, and we need to specify our job.properties file as an argument. oozie job -oozie http://url.to.oozie.server:port_number/ -config /path/to/working_dir/job.properties -submit We've submitted the job, but we don't see any activity on the JobTracker? All I got was this funny bit of output: 14-20120525161321-oozie-oracle This is because submitting a job to Oozie creates an entry for the job and places it in PREP status. What we got back, in essence, is a ticket for our workflow to ride the Oozie train. We're responsible for redeeming our ticket and running the job. oozie -oozie http://url.to.oozie.server:port_number/ -start 14-20120525161321-oozie-oracle Of course, if we really want to run the job from the outset, we can change the "-submit" argument above to "-run." This will prep and run the workflow immediately. Takeaway So, there you have it: the somewhat laborious process of building an Oozie workflow. It's a bit tedious the first time out, but it does present a pair of real benefits to those of us who spend a great deal of time data munging. First, when new data arrives that requires the same processing, we already have the workflow defined and ready to run. Second, as we build up a set of useful action definitions over time, creating new workflows becomes quicker and quicker.

Read the article

Evil DRY

- by StefanSteinegger

DRY (Don't Repeat Yourself) is a basic software design and coding principle. But there is just no silver bullet. While DRY should increase maintainability by avoiding common design mistakes, it could lead to huge maintenance problems when misunderstood. The root of the problem is most probably that many developers believe that DRY means that any piece of code that is written more then once should be made reusable. But the principle is stated as "Every piece of knowledge must have a single, unambiguous, authoritative representation within a system." So the important thing here is "knowledge". Nobody ever said "every piece of code". I try to give some examples of misusing the DRY principle. Code Repetitions by Coincidence There is code that is repeated by pure coincidence. It is not the same code because it is based on the same piece of knowledge, it is just the same by coincidence. It's hard to give an example of such a case. Just think about some lines of code the developer thinks "I already wrote something similar". Then he takes the original code, puts it into a public method, even worse into a base class where none had been there before, puts some weird arguments and some if or switch statements into it to support all special cases and calls this "increasing maintainability based on the DRY principle". The resulting "reusable method" is usually something the developer not even can give a meaningful name, because its contents isn't anything specific, it is just a bunch of code. For the same reason, nobody will really understand this piece of code. Typically this method only makes sense to call after some other method had been called. All the symptoms of really bad design is evident. Fact is, writing this kind of "reusable methods" is worse then copy pasting! Believe me. What will happen when you change this weird piece of code? You can't say what'll happen, because you can't understand what the code is actually doing. So better don't touch it anymore. Maintainability just died. Of course this problem is with any badly designed code. But because the developer tried to make this method as reusable as possible, large parts of the system get dependent on it. Completely independent parts get tightly coupled by this common piece of code. Changing on the single common place will have effects anywhere in the system, a typical symptom of too tight coupling. Without trying to dogmatically (and wrongly) apply the DRY principle, you just had a system with a weak design. Now you get a system which just can't be maintained anymore. So what can you do against it? When making code reusable, always identify the generally reusable parts of it. Find the reason why the code is repeated, find the common "piece of knowledge". If you have to search too far, it's probably not really there. Explain it to a colleague, if you can't explain or the explanation is to complicated, it's probably not worth to reuse. If you identify the piece of knowledge, don't forget to carefully find the place where it should be implemented. Reusing code is never worth giving up a clean design. Methods always need to do something specific. If you can't give it a simple and explanatory name, you did probably something weird. If you can't find the common piece of knowledge, try to make the code simpler. For instance, if you have some complicated string or collection operations within this code, write some general-purpose operations into a helper class. If your code gets simple enough, its not so bad if it can't be reused. If you are not able to find anything simple and reasonable, copy paste it. Put a comment into the code to reference the other copies. You may find a solution later. Requirements Repetitions by Coincidence Let's assume that you need to implement complex tax calculations for many countries. It's possible that some countries have very similar tax rules. These rules are still completely independent from each other, since every country can change it of its own. (Assumed that this similarity is actually by coincidence and not by political membership. There might be basic rules applying to all European countries. etc.) Let's assume that there are similarities between an Asian country and an African country. Moving the common part to a central place will cause problems. What happens if one of the countries changes its rules? Or - more likely - what happens if users of one country complain about an error in the calculation? If there is shared code, it is very risky to change it, even for a bugfix. It is hard to find requirements to be repeated by coincidence. Then there is not much you can do against the repetition of the code. What you really should consider is to make coding of the rules as simple as possible. So this independent knowledge "Tax Rules in Timbuktu" or wherever should be as pure as possible, without much overhead and stuff that does not belong to it. So you can write every independent requirement short and clean. DRYing try-catch and using Blocks This is a technical issue. Blocks like try-catch or using (e.g. in C#) are very hard to DRY. Imagine a complex exception handling, including several catch blocks. When the contents of the try block as well as the contents of the individual catch block are trivial, but the whole structure is repeated on many places in the code, there is almost no reasonable way to DRY it. try { // trivial code here using (Thingy thing = new thingy) { //trivial, but always different line of code } } catch(FooException foo) { // trivial foo handling } catch (BarException bar) { // trivial bar handling } catch { // trivial common handling } finally { // trivial finally block } The key here is that every block is trivial, so there is nothing to just move into a separate method. The only part that differs from case to case is the line of code in the body of the using block (or any other block). The situation is especially interesting if the many occurrences of this structure are completely independent: they appear in classes with no common base class, they don't aggregate each other and so on. Let's assume that this is a common pattern in service methods within the whole system. Examples of Evil DRYing in this situation: Put a if or switch statement into the method to choose the line of code to execute. There are several reasons why this is not a good idea: The close coupling of the formerly independent implementation is the strongest. Also the readability of the code and the use of a parameter to control the logic. Put everything into a method which takes a delegate as argument to call. The caller just passes his "specific line of code" to this method. The code will be very unreadable. The same maintainability problems apply as for any "Code Repetition by Coincidence" situations. Enforce a base class to all the classes where this pattern appears and use the template method pattern. It's the same readability and maintainability problem as above, but additionally complex and tightly coupled because of the base class. I would call this "Inheritance by Coincidence" which will not lead to great software design. What can you do against it: Ideally, the individual line of code is a call to a class or interface, which could be made individual by inheritance. If this would be the case, it wouldn't be a problem at all. I assume that it is no such a trivial case. Consider to refactor the error concept to make error handling easier. The last but not worst option is to keep the replications. Some pattern of code must be maintained in consistency, there is nothing we can do against it. And no reason to make it unreadable. Conclusion The DRY-principle is an important and basic principle every software developer should master. The key is to identify the "pieces of knowledge". There is code which can't be reused easily because of technical reasons. This requires quite a bit flexibility and creativity to make code simple and maintainable. It's not the problem of the principle, it is the problem of blindly applying a principle without understanding the problem it should solve. The result is mostly much worse then ignoring the principle.

Read the article

Web API, JavaScript, Chrome & Cross-Origin Resource Sharing

- by Brian Lanham

The team spent much of the week working through this issues related to Chrome running on Windows 8 consuming cross-origin resources using Web API. We thought it was resolved on day 2 but it resurfaced the next day. We definitely resolved it today though. I believe I do not fully understand the situation but I am going to explain what I know in an effort to help you avoid and/or resolve a similar issue. References We referenced many sources during our trial-and-error troubleshooting. These are the links we reference in order of applicability to the solution: Zoiner Tejada JavaScript and other material from -> http://www.devproconnections.com/content1/topic/microsoft-azure-cors-141869/catpath/windows-azure-platform2/page/3 WebDAV Where I learned about “Accept” –> http://www-jo.se/f.pfleger/cors-and-iis? IT Hit Tells about NOT using ‘*’ –> http://www.webdavsystem.com/ajax/programming/cross_origin_requests Carlos Figueira Sample back-end code (newer) –> http://code.msdn.microsoft.com/windowsdesktop/Implementing-CORS-support-a677ab5d (older version) –> http://code.msdn.microsoft.com/CORS-support-in-ASPNET-Web-01e9980a Background As a measure of protection, Web designers (W3C) and implementers (Google, Microsoft, Mozilla) made it so that a request, especially a JSON request (but really any URL), sent from one domain to another will only work if the requestee “knows” about the requester and allows requests from it. So, for example, if you write a ASP.NET MVC Web API service and try to consume it from multiple apps, the browsers used may (will?) indicate that you are not allowed by showing an “Access-Control-Allow-Origin” error indicating the requester is not allowed to make requests. Internet Explorer (big surprise) is the odd-hair-colored step-child in this mix. It seems that running locally at least IE allows this for development purposes. Chrome and Firefox do not. In fact, Chrome is quite restrictive. Notice the images below. IE shows data (a tabular view with one row for each day of a week) while Chrome does not (trust me, neither does Firefox). Further, the Chrome developer console shows an XmlHttpRequest (XHR) error. Screen captures from IE (left) and Chrome (right). Note that Chrome does not display data and the console shows an XHR error. Why does this happen? The Web browser submits these requests and processes the responses and each browser is different. Okay, so, IE is probably the only one that’s truly different. However, Chrome has a specific process of performing a “pre-flight” check to make sure the service can respond to an “Access-Control-Allow-Origin” or Cross-Origin Resource Sharing (CORS) request. So basically, the sequence is, if I understand correctly: 1)Page Loads –> 2)JavaScript Request Processed by Browser –> 3)Browsers Prepares to Submit Request –> 4)[Chrome] Browser Submits Pre-Flight Request –> 5)Server Responds with HTTP 200 –> 6)Browser Submits Request –> 7)Server Responds with Data –> 8)Page Shows Data This situation occurs for both GET and POST methods. Typically, GET methods are called with query string parameters so there is no data posted. Instead, the requesting domain needs to be permitted to request data but generally nothing more is required. POSTs on the other hand send form data. Therefore, more configuration is required (you’ll see the configuration below). AJAX requests are not friendly with this (POSTs) either because they don’t post in a form. How to fix it. The team went through many iterations of self-hair removal and we think we finally have a working solution. The trial-and-error approach eventually worked and we referenced many sources for the information. I indicate those references above. There are basically three (3) tasks needed to make this work. Assumptions: You are using Visual Studio, Web API, JavaScript, and have Cross-Origin Resource Sharing, and several browsers. 1. Configure the client Joel Cochran centralized our “cors-oriented” JavaScript (from here). There are two calls including one for GET and one for POST function(url, data, callback) { console.log(data); $.support.cors = true; var jqxhr = $.post(url, data, callback, "json") .error(function(jqXhHR, status, errorThrown) { if ($.browser.msie && window.XDomainRequest) { var xdr = new XDomainRequest(); xdr.open("post", url); xdr.onload = function () { if (callback) { callback(JSON.parse(this.responseText), 'success'); } }; xdr.send(data); } else { console.log(">" + jqXhHR.status); alert("corsAjax.post error: " + status + ", " + errorThrown); } }); }; The GET CORS JavaScript function (credit to Zoiner Tejada) function(url, callback) { $.support.cors = true; var jqxhr = $.get(url, null, callback, "json") .error(function(jqXhHR, status, errorThrown) { if ($.browser.msie && window.XDomainRequest) { var xdr = new XDomainRequest(); xdr.open("get", url); xdr.onload = function () { if (callback) { callback(JSON.parse(this.responseText), 'success'); } }; xdr.send(); } else { alert("CORS is not supported in this browser or from this origin."); } }); }; The POST CORS JavaScript function (credit to Zoiner Tejada) Now you need to call these functions to get and post your data (instead of, say, using $.Ajax). Here is a GET example: corsAjax.get(url, function(data) { if (data !== null && data.length !== undefined) { // do something with data } }); And here is a POST example: corsAjax.post(url, item); Simple…except…you’re not done yet. 2. Change Web API Controllers to Allow CORS There are actually two steps here. Do you remember above when we mentioned the “pre-flight” check? Chrome actually asks the server if it is allowed to ask it for cross-origin resource sharing access. So you need to let the server know it’s okay. This is a two-part activity. a) Add the appropriate response header Access-Control-Allow-Origin, and b) permit the API functions to respond to various methods including GET, POST, and OPTIONS. OPTIONS is the method that Chrome and other browsers use to ask the server if it can ask about permissions. Here is an example of a Web API controller thus decorated: NOTE: You’ll see a lot of references to using “*” in the header value. For security reasons, Chrome does NOT recognize this is valid. [HttpHeader("Access-Control-Allow-Origin", "http://localhost:51234")] [HttpHeader("Access-Control-Allow-Credentials", "true")] [HttpHeader("Access-Control-Allow-Methods", "ACCEPT, PROPFIND, PROPPATCH, COPY, MOVE, DELETE, MKCOL, LOCK, UNLOCK, PUT, GETLIB, VERSION-CONTROL, CHECKIN, CHECKOUT, UNCHECKOUT, REPORT, UPDATE, CANCELUPLOAD, HEAD, OPTIONS, GET, POST")] [HttpHeader("Access-Control-Allow-Headers", "Accept, Overwrite, Destination, Content-Type, Depth, User-Agent, X-File-Size, X-Requested-With, If-Modified-Since, X-File-Name, Cache-Control")] [HttpHeader("Access-Control-Max-Age", "3600")] public abstract class BaseApiController : ApiController { [HttpGet] [HttpOptions] public IEnumerable<foo> GetFooItems(int id) { return foo.AsEnumerable(); } [HttpPost] [HttpOptions] public void UpdateFooItem(FooItem fooItem) { // NOTE: The fooItem object may or may not // (probably NOT) be set with actual data. // If not, you need to extract the data from // the posted form manually. if (fooItem.Id == 0) // However you check for default... { // We use NewtonSoft.Json. string jsonString = context.Request.Form.GetValues(0)[0].ToString(); Newtonsoft.Json.JsonSerializer js = new Newtonsoft.Json.JsonSerializer(); fooItem = js.Deserialize<FooItem>(new Newtonsoft.Json.JsonTextReader(new System.IO.StringReader(jsonString))); } // Update the set fooItem object. } } Please note a few specific additions here: * The header attributes at the class level are required. Note all of those methods and headers need to be specified but we find it works this way so we aren’t touching it. * Web API will actually deserialize the posted data into the object parameter of the called method on occasion but so far we don’t know why it does and doesn’t. * [HttpOptions] is, again, required for the pre-flight check. * The “Access-Control-Allow-Origin” response header should NOT NOT NOT contain an ‘*’. 3. Headers and Methods and Such We had most of this code in place but found that Chrome and Firefox still did not render the data. Interestingly enough, Fiddler showed that the GET calls succeeded and the JSON data is returned properly. We learned that among the headers set at the class level, we needed to add “ACCEPT”. Note that I accidentally added it to methods and to headers. Adding it to methods worked but I don’t know why. We added it to headers also for good measure. [HttpHeader("Access-Control-Allow-Methods", "ACCEPT, PROPFIND, PROPPA... [HttpHeader("Access-Control-Allow-Headers", "Accept, Overwrite, Destin... Next Steps That should do it. If it doesn’t let us know. What to do next? * Don’t hardcode the allowed domains. Note that port numbers and other domain name specifics will cause problems and must be specified. If this changes do you really want to deploy updated software? Consider Miguel Figueira’s approach in the following link to writing a custom HttpHeaderAttribute class that allows you to specify the domain names and then you can do it dynamically. There are, of course, other ways to do it dynamically but this is a clean approach. http://code.msdn.microsoft.com/windowsdesktop/Implementing-CORS-support-a677ab5d

Read the article

Naming conventions: camelCase versus underscore_case ? what are your thoughts about it? [closed]

- by poelinca

I've been using underscore_case for about 2 years and I recently switched to camelCase because of the new job (been using the later one for about 2 months and I still think underscore_case is better suited for large projects where there are alot of programmers involved, mainly because the code is easier to read). Now everybody at work uses camelCase because (so they say) the code looks more elegant . What are you're thoughts about camelCase or underscore_case p.s. please excuse my bad english Edit Some update first: platform used is PHP (but I'm not expecting strict PHP platform related answers , anybody can share their thoughts on which would be the best to use , that's why I came here in the first place) I use camelCase just as everibody else in the team (just as most of you recomend) we use Zend Framework which also recommends camelCase Some examples (related to PHP) : Codeigniter framework recommends underscore_case , and honestly the code is easier to read . ZF recomends camelCase and I'm not the only one who thinks ZF code is a tad harder to follow through. So my question would be rephrased: Let's take a case where you have the platform Foo which doesn't recommend any naming conventions and it's the team leader's choice to pick one. You are that team leader, why would you pick camelCase or why underscore_case? p.s. thanks everybody for the prompt answers so far

Read the article

SUPINFO International University in Mauritius

Since a while I'm considering to pick up my activities as a student and I'd like to get a degree in Computer Science. Personal motivation I mean after all this years as a professional software (and database) developer I have the personal urge to complete this part of my education. Having various certifications by Microsoft and being awarded as an Microsoft Most Valuable Professional (MVP) twice looks pretty awesome on a resume but having a "proper" degree would just complete my package. During the last couple of years I already got in touch with C-SAC (local business school with degree courses), the University of Mauritius and BCS, the Chartered Institute for IT to check the options to enroll as an experienced software developer. Quite frankly, it was kind of alienating to receive that feedback: Start from scratch! No seriously? Spending x amount of years to sit for courses that might be outdated and form part of your daily routine? Probably being in an awkward situation in which your professional expertise might exceed the lecturers knowledge? I don't know... but if that's path to walk... Well, then I might have to go for it. SUPINFO International University Some weeks ago I was contacted by the General Manager, Education Recruitment and Development of Medine Education Village, Yamal Matabudul, to have a chat on how the local IT scene, namely the Mauritius Software Craftsmanship Community (MSCC), could assist in their plans to promote their upcoming campus. Medine went into partnership with the French-based SUPINFO International University and Mauritius will be the 36th location world-wide for SUPINFO. Actually, the concept of SUPINFO is very likely to the common understanding of an apprenticeship in Germany. Not only does a student enroll into the programme but will also be placed into various internships as part of the curriculum. It's a big advantage in my opinion as the person stays in touch with the daily procedures and workflows in the real world of IT. Statements like "We just received a 'crash course' of information and learned new technology which is equivalent to 1.5 months of lectures at the university" wouldn't form part of the experience of such an education. Open Day at the Medine Education Village Last Saturday, Medine organised their Open Day and it was the official inauguration of the SUPINFO campus in Mauritius. It's now listed on their website, too - but be warned, the site is mainly in French language although the courses are all done in English. Not only was it a big opportunity to "hang out" on the campus of Medine but it was great to see the first professional partners for their internship programme, too. Oh, just for the records, IOS Indian Ocean Software Ltd. will also be among the future employers for SUPINFO students. More about that in an upcoming blog entry. Open Day at Medine Education Village - SUPINFO International University in Mauritius Mr Alick Mouriesse, President of SUPINFO, arrived the previous day and he gave all attendees a great overview of the roots of SUPINFO, the general development of the educational syllabus and their high emphasis on their partnerships with local IT companies in order to assist their students to get future jobs but also feel the heartbeat of technology live. Something which is completely missing in classic institutions of tertiary education in Computer Science. And since I was on tour with my children, as usual during weekends, he also talked about the outlook of having a SUPINFO campus in Mauritius. Apart from the close connection to IT companies and providing internships to students, SUPINFO clearly works on an international level. Meaning students of SUPINFO can move around the globe and can continue their studies seamlessly. For example, you might enroll for your first year in France, then continue to do 2nd and 3rd year in Canada or any other country with a SUPINFO campus to earn your bachelor degree, and then live and study in Mauritius for the next 2 years to achieve a Master degree. Having a chat with Dale Smith, Expand Technologies, after his interesting session on Technological Entrepreneurship - TechPreneur More questions by other craftsmen of the Mauritius Software Craftsmanship Community And of course, this concept works in any direction, giving Mauritian students a huge (!) opportunity to live, study and work abroad. And thanks to this, Medine already announced that there will be new facilities near Cascavelle to provide dormitories and other facilities to international students coming to our island. Awesome! Okay, but why SUPINFO? Well, coming back to my original statement - I'd like to get a degree in Computer Science - SUPINFO has a process called Validation of Acquired Experience (VAE) which is tailor-made for employees in the field of IT, and allows you to enroll in their course programme. I already got in touch with their online support chat but was only redirected to some FAQs on their website, unfortunately. So, during the Open Day I seized the opportunity to have an one-on-one conversation with Alick Mouriesse, and he clearly encouraged me to gather my certifications and working experience. SUPINFO does an individual evaluation prior to their assignment regarding course level, and hopefully my chances of getting some modules ahead of studies are looking better than compared to the other institutes. Don't get me wrong, I don't want to go down the easy route but why should someone sit for "Database 101" or "Principles of OOP" when applying and preaching database normalisation and practicing Clean Code Developer are like flesh and blood? Anyway, I'll be off to get my transcripts of certificates together with my course assignments from the old days at the university. Yes, I studied Applied Chemistry for a couple of years before intersecting into IT and software development particularly... ;-)

Read the article

I have a problem with a AE1200 Cisco/Linksys Wireless-N USB adapter having stopped working after I ran the update manager in Ubuntu 12.04

- by user69670

Here is the problem, I use a Cisco/Linksys AE1200 wireless network adapter to connect my desktop to a public wifi internet connection. I use ndiswrapper to use the windows driver and it had been working fine for me untill I ran the update manager overnight a few days ago. When I woke up it was asking for the normal computer restart to implement the changes but after rebooting the computer, the wireless adapter did not work, the status light on the adapter did not light up even though ubuntu recognizes it is there and according to ndiswrapper the drivers are loaded and the hardware is present. the grep command is being a bitch for some unknown reason today so this will be long sorry Output from "lspci": 00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI Radeon Xpress 200 Host Bridge (rev 01) 00:01.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS480 PCI Bridge 00:12.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB600 Non-Raid-5 SATA 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI0) 00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI1) 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI2) 00:13.3 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI3) 00:13.4 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI4) 00:13.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB Controller (EHCI) 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 13) 00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB600 IDE 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB600 PCI to LPC Bridge 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RC410 [Radeon Xpress 200] 02:02.0 Communication controller: Conexant Systems, Inc. HSF 56k Data/Fax Modem 02:03.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster 02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Output from "lsusb": Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 009: ID 13b1:0039 Linksys AE1200 802.11bgn Wireless Adapter [Broadcom BCM43235] Bus 003 Device 002: ID 045e:0053 Microsoft Corp. Optical Mouse Bus 004 Device 002: ID 1043:8006 iCreate Technologies Corp. Flash Disk 32-256 MB Output from "ifconfig": eth0 Link encap:Ethernet HWaddr 00:19:21:b6:af:7c UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:20 Base address:0xb400 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:13232 errors:0 dropped:0 overruns:0 frame:0 TX packets:13232 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1084624 (1.0 MB) TX bytes:1084624 (1.0 MB) Output from "iwconfig": lo no wireless extensions. eth0 no wireless extensions. Output from "lsmod": Module Size Used by nls_iso8859_1 12617 1 nls_cp437 12751 1 vfat 17308 1 fat 55605 1 vfat uas 17828 0 usb_storage 39646 1 nls_utf8 12493 1 udf 84366 1 crc_itu_t 12627 1 udf snd_ca0106 39279 2 snd_ac97_codec 106082 1 snd_ca0106 ac97_bus 12642 1 snd_ac97_codec snd_pcm 80845 2 snd_ca0106,snd_ac97_codec rfcomm 38139 0 snd_seq_midi 13132 0 snd_rawmidi 25424 2 snd_ca0106,snd_seq_midi bnep 17830 2 parport_pc 32114 0 bluetooth 158438 10 rfcomm,bnep ppdev 12849 0 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq snd 62064 11 snd_ca0106, snd_ac97_codec,snd_pcm,snd_rawj9fe snd_ca0106,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd snd_page_alloc 14108 2 snd_ca0106,snd_pcm sp5100_tco 13495 0 i2c_piix4 13093 0 radeon 733693 3 ttm 65344 1 radeon drm_kms_helper 45466 1 radeon drm 197692 5 radeon,ttm,drm_kms_helper i2c_algo_bit 13199 1 radeon mac_hid 13077 0 shpchp 32325 0 ati_agp 13242 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp usbhid 41906 0 hid 77367 1 usbhid 8139too 23283 0 8139cp 26759 0 pata_atiixp 12999 1 Output from "sudo lshw -C network": *-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: 5 bus info: pci@0000:02:05.0 logical name: eth0 version: 10 serial: 00:19:21:b6:af:7c size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 10 0bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=64 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:20 ioport:b400(size=256) memory:ff5fdc00-ff5fdcff Output from "iwlist scan": lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. Output from "lsb_release -d": Ubuntu 12.04 LTS Output from "uname -mr": 3.2.0-24-generic-pae i686 Output from "sudo /etc/init.d/networking restart": * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... [ OK ]

Read the article

Highly scalable and dynamic "rule-based" applications?

- by Prof Plum

For a large enterprise app, everyone knows that being able to adjust to change is one of the most important aspects of design. I use a rule-based approach a lot of the time to deal with changing business logic, with each rule being stored in a DB. This allows for easy changes to be made without diving into nasty details. Now since C# cannot Eval("foo(bar);") this is accomplished by using formatted strings stored in rows that are then processed in JavaScript at runtime. This works fine, however, it is less than elegant, and would not be the most enjoyable for anyone else to pick up on once it becomes legacy. Is there a more elegant solution to this? When you get into thousands of rules that change fairly frequently it becomes a real bear, but this cannot be that uncommon of a problem that someone has not thought of a better way to do this. Any suggestions? Is this current method defensible? What are the alternatives? Edit: Just to clarify, this is a large enterprise app, so no matter which solution works, there will be plenty of people constantly maintaining its rules and data (around 10). Also, The data changes frequently enough to say that some sort of centralized server system is basically a must.

Read the article

Oracle Fusion Middleware 11g next launch phase - what a week of product releases! Feedback from our

- by Jürgen Kress

Product releases: SOA Suite 11gR1 Patch Set 2 (PS2) BPM Suite 11gR1 Released Oracle JDeveloper 11g (11.1.1.3.0) (Build 5660) Oracle WebLogic Server 11gR1 (10.3.3) Oracle JRockit (4.0) Oracle Tuxedo 11gR1 (11.1.1.1.0) Enterprise Manager 11g Grid Control Release 1 (11.1.0.1.0) for Linux x86/x86-64 All Oracle Fusion Middleware 11gR1 Software Download BPM Suite 11gR1 Released by Manoj Das Oracle BPM Suite 11gR1 became available for download from OTN and eDelivery. If you have been following our plans in this area, you know that this is the release unifying BEA ALBPM product, which became Oracle BPM10gR3, with the Oracle stack. Some of the highlights of this release are: BPMN 2.0 modeling and simulation Web based Process Composer for BPMN and Rules authoring Zero-code environment with full access to Oracle SOA Suite’s rich set of application and other adapters Process Spaces – Out-of-box integration with Web Center Suite Process Analytics – Native process cubes as well as integration with Oracle BAM You can learn more about this release from the documentation. Notes about downloading and installing Please note that Oracle BPM Suite 11gR1 is delivered and installed as part of SOA 11.1.1.3.0, which is a sparse release (only incremental patch). To install: Download and install SOA 11.1.1.2.0, which is a full release (you can find the bits at the above location) Download and install SOA 11.1.1.3.0 During configure step (using the Fusion Middleware configuration wizard), use the Oracle Business Process Management template supplied with the SOA Suite11g (11.1.1.3.0) If you plan to use Process Spaces, also install Web Center 11.1.1.3.0, which also is delivered as a sparse release and needs to be installed on top of Web Center 11.1.1.2.0 SOA Suite 11gR1 Patch Set 2 (PS2) released by Demed L'Her We just released SOA Suite 11gR1 Patch Set 2 (PS2)! You can download it as usual from: OTN (main platforms only) eDelivery (all platforms) 11gR1 PS2 is delivered as a sparse installer, that is to say that it is meant to be applied on the latest full install (11gR1 PS1). That’s great for existing PS1 users who simply need to apply the patch and run the patch assistant – but an extra step for new users who will first need to download SOA Suite 11gR1 PS1 (in addition to the PS2 patch). What’s in that release? Bug fixes of course but also several significant new features. Here is a short selection of the most significant ones: Spring component (for native Java extensibility and integration) SOA Partitions (to organize and manage your composites) Direct Binding (for transactional invocations to and from Oracle Service Bus) HTTP binding (for those of you trying to do away with SOAP and looking for simple GET and POST) Resequencer (for ordering out-of-order messages) WS Atomic Transactions (WS-AT) support (for propagation of transactions across heterogeneous environments) Check out the complete list of new features in PS2 for more (including links to the documentation for the above)! But maybe even more importantly we are also releasing Oracle Service Bus 11gR1 and BPM Suite 11gR1 at the same time – all on the same base platform (WebLogic Server 10.3.3)! (NB: it might take a while for all pages and caches to be updated with the new content so if you don’t find what you need today, try again soon!) Are you Systems Integrations and Independent Software Vendors ready to adopt and to deliver? Make sure that you become trained: Local training calendars Register for the SOA Partner Community & Webcast www.oracle.com/goto/emea/soa What is your feedback? Who installed the software? please feel free to share your experience at http://twitter.com/soacommunity #soacommunity Technorati Tags: SOA partner community ACE Directoris SOA Suite PS2 BPM11g First feedback from our ACE Directors and key Partners: Now, these are great times to start the journey into BPM! Hajo Normann Reuse of components across the Oracle 11G Fusion Middleware stack, BPM just is one of the components plugging into the stack and reuses all other components. Mr. Leon Smiers With BPM11g, Oracle offers a very competitive product which will have a big effect on the IT market. Guido Schmutz We have real BPMN 2.0, which get's executed. No more transformation from business models to executable models - just press the run button... Torsten Winterberg Oracle BPM Suite 11g brings Out-of-box integration with WebCenter Suite and Oracle ADF development framework. Andrejus Baranovskis With the release of BPM Suite 11g, Oracle has defined new standards for Business Process platforms. Geoffroy de Lamalle With User Messaging Service you can let Soa Suite 11g do all your Messaging Edwin Biemond

Search Results

Search found 11261 results on 451 pages for 'mr foo bar'.

Page 311/451 | < Previous Page | 307 308 309 310 311 312 313 314 315 316 317 318 | Next Page >

- by mouna

- by user1470914

- by Jon1

- by jon

- by cf_PhillipSenn

- by Rob

- by Damodhar

- by Koppar

- by DigiMortal

- by Colin McQueen

- by Brian Schroer

- by Manoj Das

- by InfinitiesLoop

- by speakjava

- by Bertrand Le Roy

- by HedgeMage

- by Twitchy

- by dan.mcclary

- by StefanSteinegger

- by Brian Lanham

- by poelinca

- by user69670

- by Prof Plum

- by Jürgen Kress

< Previous Page | 307 308 309 310 311 312 313 314 315 316 317 318 | Next Page >