Search Results

Search found 10892 results on 436 pages for 'dual map'.

Page 312/436 | < Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319  | Next Page >

• Finding the file that is on a bad block on a HFS+ volume (debugfs for HFS+)

  - by Blair Zajac

  I have a drive in our iMac that has bad blocks, as booting from an Ubuntu 11.10 live CD and using ddrescue -f /dev/sda /dev/null finds them. I'd like to get the drive to remap them by writing to the blocks, say using hdparm --write-sector, but I don't want to do this without knowing what's in those blocks and finding the file that owns them, so I can restore the file from another source. I found fileXray but don't feel like spending $79 to map a block to a file and hfsdebug has been taken offline. Are there suggestions on a tool or technique to use? I looked at all the Ubuntu HFS+ packages to see if they could provide this info but nothing jumped out at me. BTW, I used Disk Utility to erase the empty space, but it didn't get any of the bad blocks to be remapped, according to smartctl -A.

  Read the article

• Free-flow Alternative to Powerpoint?

  - by Nick Klauer

  So I've been digging around the net trying to find a good set of alternatives to Powerpoint. Part of my interest is that I found one, Prezi, that I liked for it's free-form style. Part of the power of it was that I can zoom out and select any part of the presentation to continue from and it feels much like a mind map or association of thoughts. Are there any other tools that offer anything similar in vein to this way of presenting material? I'm looking for something that just pops differently than a death-by-powerpoint-style presentation, so I would be happy to find tools that help present information in more fluid styles. It doesn't have to mirror Prezi, and I wouldn't want that, but after seeing what Prezi does, I have to think there are other ways of presenting information to a group of people than one square slide at a time.

  Read the article

• Syntax of mac2vlan file in freeradius?

  - by Edik Mkoyan

  below is the content of mac2vlan file in freeradius When I uncomment this 00:01:02:03:04:05,VLAN1 it logs parsing error including configuration file /etc/raddb/modules/mac2vlan /etc/raddb/modules/mac2vlan[10]: Parse error after "00:01:02:03:04:05" Errors reading /etc/raddb/radiusd.conf what is the correct syntax? # -*- text -*- # # $Id$ # A simple file to map a MAC address to a VLAN. # # The file should be in the format MAC,VLAN # the VLAN name cannot have spaces in it, for example: # 00:01:02:03:04:05,VLAN1 # 03:04:05:06:07:08,VLAN2 # ... passwd mac2vlan { filename = ${confdir}/mac2vlan format = "*VMPS-Mac:=VMPS-VLAN-Name" delimiter = "," #}

  Read the article

• How to "ignore" username and password prompt in net use

  - by Mattisdada

  I have at the moment a logon.cmd script, that I'm using to map network drives to the users profile. It looks like this: ::Onboarding net use m: /delete net use m: \\BOB\onboarding ::Bookings net use n: /delete net use n: \\BOB\bookings ::Accounts net use j: /delete net use j: \\BOB\accounts It works fine up until it gets up to a folder that the current user cannot access, it then asks for a username and password instead of erroring and continuing. Notes: This very script used to work on another Samba PDC network, but I've moved it over to another server (Still Samba PDC) and now its breaking. Is there anyway for it to ignore the username/password prompt and just continue?

  Read the article

• SharePoint 2007: Moving main site, to be a subsite - How can urls be redirected/changed?

  - by program247365

  The setup: SharePoint 2007 (MOSS Enterprise) on WINSVR03/IIS6 One site collection, with one access mapping (http://mainsite) currently I'm moving the main SharePoint site, in our one site collection, to be a subsite in a new site collection. I'm using SharePoint Content Deployment Wizard to complete this task (http://spdeploymentwizard.codeplex.com/). The Question So the main site http://mainsite being moved has many subsites, etc. I want to be sure that urls like this: http://mainsite/subsite/doclib/doc1.docx map to and redirect to the new url: http://newsite/mainsite/subsite/doclib/doc1.docx ? And furthermore: I'm aware of this - http://rdacollaboration.codeplex.com/releases/view/28073 , however is it IIS7 only? That'd wouldn't work for me. Looking at this question - http://serverfault.com/questions/107537/dealing-with-moved-documents-and-sites-in-sharepoint is the only one I see that is similar. Would an IIS redirect of http://mainsite to http://newsite/mainsite work only for the root url?

  Read the article

• Network trials and tribulations

  - by MauiWowie

  Hi, I am in the process of setting up a small (two PC's, both running Windows 7) network using a D-link DI-604 router (which acts only as hub, it's not set up in any way). In the Network and 'Sharing Center' in 'Control Panel' I clicked 'Set up a New (Connection or) Network'. All went well up until the moment I attempted to connect one PC with the other (in the 'Connect' dialog I entered the other PC's IP, no pwd). I can use both PC's to connect to and browse the net though, so the router/hub does not seem to be the problem. And I must have done something right, because the other computer shows up in the 'Network Map'. Any and all help is much appreciated!

  Read the article

• How to configure autofs5 timeout on per-filesystem basis?

  - by Norman Ramsey

  Because of a show-stopping bug in Debian autofs 4, I just upgraded to autofs5. It is not honoring the timeout option in my auto.master file: /var/autofs/removable /etc/auto.removable --timeout=2 I use this map for thumb drives and so on; I don't want a general default timeout of 2 seconds. I did some digging and although the --timeout option worked in autofs 4, and it appears in some examples on the Web, it is not actually sanctioned (or even mentioned) in the documentation for the auto.master file. So I don't feel I can report the problem as a bug. How can I get autofs5 to timeout after 2 seconds only on designated filesystems? Update: I am using a Debian-packaged autofs5, version 5.0.4-3.2.

  Read the article

• NIS server setting problem in ubuntu

  - by Asma

  Hi, I set NFS for server-client that works properly. Now I am trying to set NIS server-client on same PC's. I am following the instruction from "SettingUpNISHowTo" from https://help.ubuntu.com/community/SettingUpNISHowTo link. But in step-10, "sudo /etc/init.d/nis restart".......it show error fail. If I try to use "ypcat passwd" to check......it shows error YPBINDPROC_DOMAIN: Domain not bound No such map passwd.byname. Reason: Can't bind to server which serves this domain Can anyone able to help me to get rid out from this problem? Is all the step in the document is proper to configure the NIS server? Thanks in advance.

  Read the article

• Rules to choose hardware for OLTP systems (sql server)

  - by Roman Pokrovskij

  Ok. We know database size, number of concurrent users, number of transactions per minute; should choose number of processors, RAID, RAM, mirroring and clustering. There are no exact rule.. but may be there are no rules at all? In my practice in every case I have "legacy" system, and after some inspections and interview I can form an opinion how hardware and design can be improved. But every time when I meet "absolutely" new system (I guess there are no new systems, but sometimes are such tasks) I can't say anything trustful. So I'm interesting how people deal with such tasks? They map task on theirs experience or have some base formulas?

  Read the article

• nginx howto correct the path from a back-end server redirect response under a virtual directory

  - by noname

  The following was my deployed servers: client ------ nginx proxy(example.com) ------ back-end server(192.168.1.20) The nginx proxy's external URL was configured under a virtual directory http://example.com/demo/ The back-end server was configure to http://192.168.1.20:8080/ the following was part of the nginx configure file: location /demo { proxy_pass http://192.168.1.20:8080/; proxy_redirect default; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } When the back-end server send a redirect response (HTTP CODE 302) with LOCATION head field "http://192.168.1.20/subdir/", the nginx map this LOCATION header field to "http://example.com/subdir/", not the disired "http://example.com/demo/subdir/"

  Read the article

• apache mod_proxy or mod_rewrite for hide a root of a webserver behind a path

  - by Giovanni Nervi

  I have 2 apache 2.2.21 one external and one internal, I need to map the internal apache behind a path in external apache, but I have some problems with absolute url. I tried these configurations: RewriteEngine on RewriteRule ^/externalpath/(.*)$ http://internal-apache.test.com/$1 [L,P,QSA] ProxyPassReverse /externalpath/ http://internal-apache.test.com/ or <Location /externalpath/> ProxyPass http://internal-apache.test.com/ ProxyPassReverse http://internal-apache.test.com/ </Location> My internal apache use absolute path for search resources as images, css and html and I can't change it now. Some suggestions? Thank you

  Read the article

• Bind dns server in Solaris 10 and win xp clients

  - by stevecomptech

  Hi, Added this in zone db file, i am running solaris 10 _ldap._tcp.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.mydomain.com. SRV 0 0 88 dc.mydomain.com. _ldap._tcp.dc._msdcs.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.dc._msdcs.mydomain.com. SRV 0 0 88 host.mydomain.com. Now i get this error when i try to join win xp to the domain The query was for the SRV record for _ldap._tcp.dc._msdcs.mydomain.com The following domain controllers were identified by the query: host.mydomain.com Common causes of this error include: Host (A) records that map the name of the domain controller to its IP addresses are missing or contain incorrect addresses. Domain controllers registered in DNS are not connected to the network or are not running. What do i need to change in order my win xp join the domain

  Read the article

• How can I connect to my Airport Extreme Shared Disk using Windows?

  - by matt ryan

  I have a shared disk attached to my Airport Extreme, which I can connect to remotely in OS X through the finder via command - k, and entering in the proper address: afp://test.dyndns.org:1111 1111 being the port I've reserved for the disk in the AE port mapping. This is such a great feature, but I don't always have access to a Mac. My question is how can I connect to this drive via Windows XP? Please note, that the shared drive is a Drobo FS and formatted to handle both Windows and Mac OS. I've tried mapping a network drive via My Computer - Tools - Map Network Drive and entering: \\test.dyndns.org:1111\Drobo-Name I've also tried Start - Run and entering the same, both with and without the port #.

  Read the article

• ata error: UnrecovData Handshk

  - by Aaron Digulla

  I just saw this message in my log (openSUSE 11.3, Linux 2.6.36.2): ata6.00: exception Emask 0x10 SAct 0x1 SErr 0x400100 action 0x6 frozen ata6.00: irq_stat 0x08000000, interface fatal error ata6: SError: { UnrecovData Handshk } ata6.00: failed command: WRITE FPDMA QUEUED ata6.00: cmd 61/58:00:9f:69:00/00:00:00:00:00/40 tag 0 ncq 45056 out res 40/00:04:9f:69:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error) ata6.00: status: { DRDY } ata6: hard resetting link ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata6.00: configured for UDMA/133 ata6: EH complete Two questions: Which disk caused the error? I search /sys and /proc but couldn't find a way to map ata6 to a device (/dev/sdaXY) When such an error happens, does Linux retry the disk operation? Or do I have a corrupt filesystem?

  Read the article

• Windows Server 2003 - passwordless access to \\myhost\ but not \\myhost.mydomain.net\

  - by Charles Duffy

  I have a Windows Server 2003 system on which passwordless access to local UNC paths is possible using the server's unqualified hostname or its IP address, but not via its FQDN -- even when the hosts file is used to map that FQDN directly to 127.0.0.1. That is: \\127.0.0.1\ - passwordless \\myhost\ - passwordless \\myhost.mydomain.com\ - brings up an authentication dialog Unfortunately, I have a local application trying to resolve UNC paths including the host's FQDN. I've tried resolving myhost.mydomain.com to 127.0.0.1 in both hosts and lmhosts, and calling ping myhost.mydomain.com at the command prompt gives the appearance that this resolution has taken effect; even so, attempting to open \\myhost.mydomain.com\ from Windows Explorer brings up a password prompt, while \\127.0.0.1\ does not. The system is using an OpenDirectory server (Apple's Kerberos+LDAP directory service) for authentication.

  Read the article

• Bind dns server in Solaris 10 and win xp clients

  - by stevecomptech

  Hi, Added this in zone db file, i am running solaris 10 _ldap._tcp.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.mydomain.com. SRV 0 0 88 dc.mydomain.com. _ldap._tcp.dc._msdcs.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.dc._msdcs.mydomain.com. SRV 0 0 88 host.mydomain.com. Now i get this error when i try to join win xp to the domain The query was for the SRV record for _ldap._tcp.dc._msdcs.mydomain.com The following domain controllers were identified by the query: host.mydomain.com Common causes of this error include: Host (A) records that map the name of the domain controller to its IP addresses are missing or contain incorrect addresses. Domain controllers registered in DNS are not connected to the network or are not running. What do i need to change in order my win xp join the domain

  Read the article

• Access my mac's local server from a windows machine

  - by Simon Davies

  I am running my test sites on my mac, but I would like be able to use my windows machine to also access this server and be able to write / read fiels form this server. I can access my sites on my windows by using the IP address 192.168.1.???. But I would like to be able to use my windows machine to also access the fiels and edit them. Any ideas much appreciated. Some details: Mac OSX SL file sharing set to on. Windows 7 (tried setting up network map using afp://192.... but nothing) Both machines are connected to a local network, with several other machine (windows) Thanks

  Read the article

• Issue with Capslock key on Laptop

  - by Mr New

  For some reason my laptop has a mind of its own and the Caps Lock tends to come on whenever it feels like it. I thought it was an software issue from that reasoning, but I later cleared the OS and then reinstalled it hoping to fix the problem, but it didn't. Not only does it do that it also comes on and off whenever the letters A, S, and left shift key are pushed. So I assummed it was a keyboard issue and that the keyboard needs to be replaced, but it has one of those touch pad cap lock buttons also, because even when I press that button it tends to not react. So how can that be fixed with a keyboard replacement or is that connected still? EDIT - I followed the direction with the following code in notepad and it didn't do the job: Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Keyboard Layout] “Scancode Map”=hex:00000000 00000000 0200000000 00003A00 00000000

  Read the article

• Using Folder Redirection GPO and Offline Files and Folders

  - by user132844

  I want to use Folder Redirection to redirect user's My Documents to a network share. First question is: What is best practices for mapping the drive? Should I use the profile tab in AD with the %username% variable, or a net use logon script, or something else? Second question is: How do I deal with laptops and syncing the network with the local storage? I want to have 2-way syncing so if they manually map their networked home drive and edit it from a different computer, it will sync the newer version to their My Documents folder the next time they connect their normal work computer. I also want to be sure that if they edit a file offline on their laptop while away from the office, that the network version syncs the changes the next time they connect that laptop. Please advise best practices for this scenario in a 2008 R2/Win7 environment. I am also interested in Mac clients for this environment, and while I am very Mac savvy, I would like to hear what others consider to be best practices for Mac network homedirs in a Win environment.

  Read the article

• Mapping an sFTP connection to a Windows drive?

  - by Nicolas

  I'm looking for a way to map an sFTP connection to a Windows (Vista) drive. In other words, a tool that would add a new drive (let's say N:) to my computer, that would directly point to my remote server via sFTP. That way, "N:\my_dir\file.txt" would actually be something like "/home/user/my_dir/file.txt" on the remote server. Reading the file on Windows would download it, and writing content in it would upload it...network transfers being made via sFTP. I'm aware of Novell NetDrive, but it has various issues with long filenames, and seems to corrupt UTF-8 files content depending on the BOM. Do you know about any reliable alternative ? Thanks ! Edit : I have complete control of the remote server, except that it's remote enough for me not to be able to physically access it.

  Read the article

• No virtual console on ubuntu 12.10

  - by Buzzzz

  When I try to do a ctr-alt f(1-6) in ubuntu 12.10 I only get a black screen with a blinking cursor but no login prompt. Any ideas on what could be wrong? It is a fresh install of 12.10 using a amd radeon 5850 graphics card. i have tried different things in my /etc/default/grub but at the moment I use the following: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash vga=normal" #GRUB_CMDLINE_LINUX="vga=0x0376" #RUB_CMDLINE_LINUX_DEFAULT="vga=0x014c" #GRUB_CMDLINE_LINUX="vga=0x014c" #GRUB_GFXPAYLOAD_LINUX=1600x1200x24 # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console

  Read the article

• Notification if SyncToy fails

  - by Joel Coehoorn

  I support a number of laptop users. In the past (before there were many laptops), each user's computer was set up so that their My Documents folder was mapped to a shared folder on the server. This worked very well for desktops, but has several obvious downsides for laptops (no files when you're off-site, etc). I'm exploring several alternatives for laptops to better map the shared drives, and SyncToy seems the best so far. I have a couple trial users set up so that it syncs automatically whenever they log in, along with a desktop icon they can click if they know they'll need something saved before the next login. My problem is that I'm concerned how I, as the maintainer of this system, can spot failures. I don't want my first indication of a problem to come after a user drops their laptop in a lake and it turns out nothing was synced for the last year. Any ideas?

  Read the article

• How come transparency in textures appears as white in 3ds Max?

  - by rFactor

  I have downloaded a free tree palm model that came with textures and a preview image. In the preview image the tree looks fine, but when I have deployed the textures to my scene, the leaves look green plus white, where white is the transparency area. Is there something I need to know about transparent textures? Both in the view-port and in the renderer all transparency appears as white. What could it be? Edit: The model I was talking about is implemented with two JPGs. One is textured and the other one is black-white where white represents transparency and is applied to the material in the opacity channel/map. The transparency seems to work somewhat, but there are white borders around the leaves. I think it's because the opacity channel does not properly filter out all white colors for some reason. It also seems that changing the blur affects it, but setting it to 0 does not remove it though (and makes it jaggy).

  Read the article

• de-assign alt + right arrow

  - by jcollum

  I'm trying to map View.NavigateBackward and View.NavigateBackward like so: View.NavigateBackward = Alt + LeftArrow View.NavigateForward = Alt + RightArrow Pretty simple to do in Visual Studio with the Keyboard Options dialog. OK so I've assigned the shortcuts and the NavigateBackward one is working. But NavigateForward, which used to be assigned to Edit.CompleteWord, is staying with its old assignment. I've checked that Edit.CompleteWord is assigned to 'Ctrl+K, W' but the Alt+RightArrow is still behaving as complete word. Is there something special about the arrow keys that I can't assign them? I want to do this so the mouse buttons behave the same in VS 2010 and my web browser. Works fine for the back button, but the forward button won't re-assign properly. Suggestions?

  Read the article

• script Disk Management configuration

  - by Joseph

  I have 10 workstations with large monitors that have USB slots and several card readers built in. The card readers cannot be disabled and will map to drive letters when I image the computers. I go into Disk Management and delete the drive mappings and add mappings to a single folder in C:\ with a folder for each slot. I have to do this because of scripts that run that are expecting specific letter drive mappings to network resources. Is there a way to script the deleting and adding of drive mappings instead of having to use the Disk Management GUI manually on each workstation? The workstations are running XP Professional.

  Read the article

< Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319  | Next Page >