Search Results

Search found 9058 results on 363 pages for 'length'.

Page 312/363 | < Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319  | Next Page >

• Basic OpenVPN setup not working

  - by WalterJ89

  I am attempting to connect 2 win7 (x64+ x32) computers (there will be 4 in total) using OpenVPN. Right now they are on the same network but the intention is to be able to access the client remotely regardless of its location. The Problem I am having is I am unable to ping or tracert between the two computers. They seem to be on different subnets even though I have the mask set to 255.255.255.0. The server ends up as 10.8.0.1 255.255.255.252 and the client 10.8.0.6 255.255.255.252. And a third ends up as 10.8.0.10. I don't know if this a Windows 7 problem or something I have wrong in my config. Its a very simple set up, I'm not connecting two LANs. this is the server config (removed all the extra lines because it was too ugly) port 1194 proto udp dev tun ca keys/ca.crt cert keys/server.crt key keys/server.key # This file should be kept secret dh keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt client-to-client duplicate-cn keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 6 this is the client config client dev tun proto udp remote thisdomainis.random.com 1194 resolv-retry infinite nobind persist-key persist-tun ca keys/ca.crt cert keys/client.crt key keys/client.key ns-cert-type server comp-lzo verb 6 Is there anything I missed in this? keys are all correct and the vpn's connect fine, its just the subnet or route issue. Thank You EDIT it seems on the server the openvpn-status.log has the routes for the client SERVER OpenVPN CLIENT LIST Updated,Wed May 19 18:26:32 2010 Common Name,Real Address,Bytes Received,Bytes Sent,Connected Since client,192.168.10.102:50517,19157,20208,Wed May 19 17:38:25 2010 ROUTING TABLE Virtual Address,Common Name,Real Address,Last Ref 10.8.0.6,client,192.168.10.102:50517,Wed May 19 17:38:56 2010 GLOBAL STATS Max bcast/mcast queue length,0 END Also this is from the client.log file: Which seems to be correct C:\WINDOWS\system32\route.exe ADD 10.8.0.0 MASK 255.255.255.0 10.8.0.5 Another EDIT 'route print' on the server shows the route: Destination Mask Gateway Interface 10.8.0.0 255.255.255.0 10.8.0.2 10.8.0.1 the same on the client shows 10.8.0.0 255.255.255.0 10.8.0.5 10.8.0.6 So the routes are there.. what can the problem be? Is there anything wrong with my configs? Why would OpenVPN be having problems communicating?

  Read the article

• What is good usage scenario for Rackspace Cloud Files CDN (powered by AKAMAI) [closed]

  - by Andrew Smith

  I have just setup my website as static page via Rackspace CDN / Akamai. www.example.co.uk is an alias for d9771e6f24423091aebc-345678991111238fabcdef6114258d0e1.r61.cf3.rackcdn.com. d9771e6f24423091aebc-345678991111238fabcdef6114258d0e1.r61.cf3.rackcdn.com is an alias for a61.rackcdn.com. a61.rackcdn.com is an alias for a61.rackcdn.com.mdc.edgesuite.net. a61.rackcdn.com.mdc.edgesuite.net is an alias for a63.dscg10.akamai.net. a63.dscg10.akamai.net has address 63.166.98.41 a63.dscg10.akamai.net has address 63.166.98.40 a63.dscg10.akamai.net has IPv6 address 2001:428:4c02::cda8:ecb9 a63.dscg10.akamai.net has IPv6 address 2001:428:4c02::cda8:ed09 The HTTP header: HTTP/1.0 200 OK Last-Modified: Fri, 19 Oct 2012 23:27:41 GMT ETag: fdf9e14b77def799e09e8ce815a521da X-Timestamp: 1350689261.23382 Content-Type: text/html X-Trans-Id: tx457979be3bd746c2b4e5403a1189cdbc Cache-Control: public, max-age=900 Expires: Sat, 27 Oct 2012 22:18:56 GMT Date: Sat, 27 Oct 2012 22:03:56 GMT Content-Length: 7124 Connection: keep-alive I am wondering, if it's really the fastest solution to power the website? By investigating it thru http://www.just-ping.com/ it seems, that from many places the ping is very high, and during quick investigation I found that they use GeoIP to resolve addresses based on WHOIS, which is not accurate and because of that from many places the ping is above 300ms (for example, if ISP is in balgladore and request is routed to bangladore even if it's 300ms, for period of 1 month), while by just using Amazon Web Services and Route 53 Anycast DNS servers and only 4 EC2 instances it seems that for example India is always below 100ms, while using Akamai it goes above 300ms in some cases, and this is because Route 53 is using BGP. By quickly checking the Akamai, it seems that they are not getting feedback from the traffic - the high ping stays constant even if I keep downloading large files and videos, which is opposite to what they say on their website. They state, that they optimize the performance by taking feedback from the requests, while it seems they just use GeoIP with per City resolution (which are mostly big cities). Because of this, AWS with Route 53 / Anycast DNS seems to be much more reliable, as well EdgeCast which is using BGP, but I dont know how much does it cost to deploy static website. Actually, I dont know if EdgeCast is not a lie, because from isolated places there are many errors - so their performance is at the cost of quality of delivery, because of BGP switching the routes during transfer of large files. So I was wondering, what is really Akamai good for, because they dont seem to pose any strength in any field in what I do understand now, except they offer some software based WAF on their website, but what I really care about is the core distribiution, so the question is? Is really Akamai good for Videos? For static websites? ??? I found so far AWS most usable with most consistent ping and stable transfers.

  Read the article

• Concatenation of a 2 second silence audio with a normal audio not working

  - by user1665130

  I have a code for concatenation of files using ffmpeg.Here silence.wav is a mute audio file with 2 seconds length. I need to prepend this mut audio file to REC00096_Jun-06-2014 16.47.28.wav. I tried the folowing code. ffmpeg -i D:\vishnu\silence.wav -i D:\vishnu\REC00096_Jun-06-2014 16.47.28.wav \-filter_complex '[0:0][1:0][2:0][3:0]concat=n=2:v=0:a=1[out]' \-map '[out]' output.wav Following is the error i am getting. D:\vishnu>ffmpeg -i silence.wav -i "D:\vishnu\REC00096_Jun-06-2014 16.47.28.wav" -filter_complex '[0:0][1:0][2:0][3:0]concat=n=2:v=0:a=1[out]' -map '[out]' outp ut.wav ffmpeg version N-59036-g5d8e4f6 Copyright (c) 2000-2013 the FFmpeg developers built on Dec 12 2013 22:01:01 with gcc 4.8.2 (GCC) configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-av isynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enab le-iconv --enable-libass --enable-libbluray --enable-libcaca --enable-libfreetyp e --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --ena ble-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-l ibopus --enable-librtmp --enable-libschroedinger --enable-libsoxr --enable-libsp eex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo-aa cenc --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavp ack --enable-libx264 --enable-libxavs --enable-libxvid --enable-zlib libavutil 52. 58.100 / 52. 58.100 libavcodec 55. 45.101 / 55. 45.101 libavformat 55. 22.100 / 55. 22.100 libavdevice 55. 5.102 / 55. 5.102 libavfilter 3. 92.100 / 3. 92.100 libswscale 2. 5.101 / 2. 5.101 libswresample 0. 17.104 / 0. 17.104 libpostproc 52. 3.100 / 52. 3.100 Input #0, wav, from 'silence.wav': Metadata: encoder : Lavf55.22.100 Duration: 00:00:02.02, bitrate: 4234 kb/s Stream #0:0: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 44100 Hz, 5.1, s16, 4 233 kb/s Guessed Channel Layout for Input Stream #1.0 : mono Input #1, wav, from 'D:\vishnu\REC00096_Jun-06-2014 16.47.28.wav': Duration: 00:00:08.04, bitrate: 384 kb/s Stream #1:0: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 24000 Hz, mono, s16, 384 kb/s [wav @ 036f5e40] Invalid stream specifier: '[out]'. Last message repeated 1 times Stream map ''[out]'' matches no streams. D:\vishnu>

  Read the article

• Innodb Queries Slow

  - by user105196

  I have redHat 5.3 (Tikanga) with Mysql 5.0.86 configued with RIAD 10 HW, I run an application inquiries from Mysql/InnoDB and MyIsam tables, the queries are super fast,but some quires on Innodb tables sometime slow down and took more than 1-3 seconds to run and these queries are simple and optimized, this problem occurred just on innodb tables in different time with random queries. Why is this happening only to Innodb tables? the below is the Innodb status and some Mysql variables: show innodb status\G ************* 1. row ************* Status: 120325 10:54:08 INNODB MONITOR OUTPUT Per second averages calculated from the last 19 seconds SEMAPHORES OS WAIT ARRAY INFO: reservation count 22943, signal count 22947 Mutex spin waits 0, rounds 561745, OS waits 7664 RW-shared spins 24427, OS waits 12201; RW-excl spins 1461, OS waits 1277 TRANSACTIONS Trx id counter 0 119069326 Purge done for trx's n:o < 0 119069326 undo n:o < 0 0 History list length 41 Total number of lock structs in row lock hash table 0 LIST OF TRANSACTIONS FOR EACH SESSION: ---TRANSACTION 0 0, not started, process no 29093, OS thread id 1166043456 MySQL thread id 703985, query id 5807220 localhost root show innodb status FILE I/O I/O thread 0 state: waiting for i/o request (insert buffer thread) I/O thread 1 state: waiting for i/o request (log thread) I/O thread 2 state: waiting for i/o request (read thread) I/O thread 3 state: waiting for i/o request (write thread) Pending normal aio reads: 0, aio writes: 0, ibuf aio reads: 0, log i/o's: 0, sync i/o's: 0 Pending flushes (fsync) log: 0; buffer pool: 0 132777 OS file reads, 689086 OS file writes, 252010 OS fsyncs 0.00 reads/s, 0 avg bytes/read, 0.00 writes/s, 0.00 fsyncs/s INSERT BUFFER AND ADAPTIVE HASH INDEX Ibuf: size 1, free list len 366, seg size 368, 62237 inserts, 62237 merged recs, 52881 merges Hash table size 8850487, used cells 3698960, node heap has 7061 buffer(s) 0.00 hash searches/s, 0.00 non-hash searches/s LOG Log sequence number 15 3415398745 Log flushed up to 15 3415398745 Last checkpoint at 15 3415398745 0 pending log writes, 0 pending chkp writes 218214 log i/o's done, 0.00 log i/o's/second BUFFER POOL AND MEMORY Total memory allocated 4798817080; in additional pool allocated 12342784 Buffer pool size 262144 Free buffers 101603 Database pages 153480 Modified db pages 0 Pending reads 0 Pending writes: LRU 0, flush list 0, single page 0 Pages read 151954, created 1526, written 494505 0.00 reads/s, 0.00 creates/s, 0.00 writes/s No buffer pool page gets since the last printout ROW OPERATIONS 0 queries inside InnoDB, 0 queries in queue 1 read views open inside InnoDB Main thread process no. 29093, id 1162049856, state: waiting for server activity Number of rows inserted 77675, updated 85439, deleted 0, read 14377072495 0.00 inserts/s, 0.00 updates/s, 0.00 deletes/s, 0.00 reads/s END OF INNODB MONITOR OUTPUT 1 row in set, 1 warning (0.02 sec) read_buffer_size = 128M sort_buffer_size = 256M tmp_table_size = 1024M innodb_additional_mem_pool_size = 20M innodb_log_file_size=10M innodb_lock_wait_timeout=100 innodb_buffer_pool_size=4G join_buffer_size = 128M key_buffer_size = 1G can any one help me ?

  Read the article

• Apache/2.2.20 (Ubuntu 11.10) gzip compression won't work on php pages, content is chunked

  - by FamousInteractive

  I'm running into a problem with a new production server whereto I'm transferring projects. The HTML output of the PHP applications isn't compressed by the Apache mod_deflate module. Other resources, as stylesheet and javascript files, even html pages, which are served with the same Content-type (text/html) as the PHP output, are compressed! The projects use the following rules (from HTML5 boilerplate) in the .htaccess: <IfModule mod_deflate.c> # Force deflate for mangled headers developer.yahoo.com/blogs/ydn/posts/2010/12/pushing-beyond-gzipping/ <IfModule mod_setenvif.c> <IfModule mod_headers.c> SetEnvIfNoCase ^(Accept-EncodXng|X-cept-Encoding|X{15}|~{15}|-{15})$ ^((gzip|deflate)\s*,?\s*)+|[X~-]{4,13}$ HAVE_Accept-Encoding RequestHeader append Accept-Encoding "gzip,deflate" env=HAVE_Accept-Encoding </IfModule> </IfModule> # HTML, TXT, CSS, JavaScript, JSON, XML, HTC: <IfModule filter_module> FilterDeclare COMPRESS FilterProvider COMPRESS DEFLATE resp=Content-Type $text/html FilterProvider COMPRESS DEFLATE resp=Content-Type $text/css FilterProvider COMPRESS DEFLATE resp=Content-Type $text/plain FilterProvider COMPRESS DEFLATE resp=Content-Type $text/xml FilterProvider COMPRESS DEFLATE resp=Content-Type $text/x-component FilterProvider COMPRESS DEFLATE resp=Content-Type $application/javascript FilterProvider COMPRESS DEFLATE resp=Content-Type $application/json FilterProvider COMPRESS DEFLATE resp=Content-Type $application/xml FilterProvider COMPRESS DEFLATE resp=Content-Type $application/xhtml+xml FilterProvider COMPRESS DEFLATE resp=Content-Type $application/rss+xml FilterProvider COMPRESS DEFLATE resp=Content-Type $application/atom+xml FilterProvider COMPRESS DEFLATE resp=Content-Type $application/vnd.ms-fontobject FilterProvider COMPRESS DEFLATE resp=Content-Type $image/svg+xml FilterProvider COMPRESS DEFLATE resp=Content-Type $image/x-icon FilterProvider COMPRESS DEFLATE resp=Content-Type $application/x-font-ttf FilterProvider COMPRESS DEFLATE resp=Content-Type $font/opentype FilterChain COMPRESS FilterProtocol COMPRESS DEFLATE change=yes;byteranges=no </IfModule> </IfModule> We have a testing machine that runs the same Apache, OS and PHP version. On that machine the compression works just fine on the PHP output. I've checked and compared Apache and PHP config files, all the same as far as I can tell. I've tried several manners of outputting the content of the PHP, using output buffering or just plain echoing the content. Same thing, no compression. Example response headers of a PHP output: HTTP/1.1 200 OK Date: Wed, 25 Apr 2012 23:30:59 GMT Server: Apache Accept-Ranges: bytes Expires: Thu, 19 Nov 1981 08:52:00 GMT Cache-Control: public Pragma: no-cache Vary: User-Agent Keep-Alive: timeout=5, max=98 Connection: Keep-Alive Transfer-Encoding: chunked Content-Type: text/html; charset=utf-8 Example of response headers on a css file: HTTP/1.1 200 OK Date: Wed, 25 Apr 2012 23:30:59 GMT Server: Apache Last-Modified: Mon, 04 Jul 2011 19:12:36 GMT Vary: Accept-Encoding,User-Agent Content-Encoding: gzip Cache-Control: public Expires: Fri, 25 May 2012 23:30:59 GMT Content-Length: 714 Keep-Alive: timeout=5, max=100 Connection: Keep-Alive Content-Type: text/css; charset=utf-8 Does anyone has a clue or experienced the same "problem"? thanks!

  Read the article

• long access times and errors in iis application

  - by Jens Olsson

  Hi, I am having an issue with an IIS application (details of environment at the end of the message). The web site works great most of the time and I cannot reproduce any error in our test system. On the live system however with on averare of 5-15 requests per second I have a problem with that some requests (about 0.05%) will take over 300 seconds to complete. The other requests complete withing 5-10 seconds. It seem like if all the errornous requests end up with a Timer_EntityBody error in the error log. I have never seen this as an end user but I guess that they will receive some kind of error message. I am trying to find out what can be causing this errornous behaviour. Any ideas are welcome. I have read something about that there can be an MTU issue if ICMP and MTU protocols are blocked in the firewall. Does that sound reasonable? I have also read about updating to IIS 7 should do the trick. Does it sound reasonable? I think that the problem has another cause but I have no idea of what. I have tried running hte perormance monitor, monitoring for database locks and active transaction counts. I can see some of these in the perfmon log for the MSSQL server (another machine) for example: Active transactions is sometimes peaking and sometimes for long periods Lock waits per seconds is sometimes peaking Transactions per second is sometimes peaking Page IO Latch wait is sometimes peaking Lock wait time (ms) is sometimes peaking But I cannot see that any of these correlate to the errors in the IIS error log. On the IIS server machine I can also see with perfmon that some values peak a few times during a day: Request execution time Avg disk queue length I can neither see that any of these correlate to the errors in the IIS error log. In the below code I have anonymized by replacing some parts with HIDDEN The following can be seen in the access log 2010-10-01 08:35:05 W3SVC1301873091 **HIDDEN** POST /**HIDDEN**/Modules/BalanceModule.aspx - 80 - **HIDDEN** Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.1;+.NET+CLR+2.0.50727;+.NET+CLR+3.0.4506.2152;+.NET+CLR+3.5.30729;+.NET4.0C;+.NET4.0E) ASP.NET_SessionId=**HIDDEN** 400 0 64 0 2241 127799 At the same time the following can be seen in the error log: 2010-10-01 08:35:05 **HIDDEN** 1999 **HIDDEN** 80 HTTP/1.0 POST /**HIDDEN**/Modules/BalanceModule.aspx - 1301873091 Timer_EntityBody Test+Pool I can tell the following about the environment: Server: Windows Server 2003 x64 SP2 running on VMWare HTTP Server: IIS v6.0 with ASP.NET 2.0.50727 Antivirus: Trend Micro OfficeScan (Is it a good idea to have this on a server?)

  Read the article

• How to enjoy DVD on Apple iPad

  - by user44251

  I believe many people spent a sleepless night yesterday waiting for the new Apple Tablet to come, just a few days ago or perhaps longer I noticed fierce debate about it, its name, size, capacity, processor, main features, price etc. And now, they can take a long breath with the new Apple Tablet named iPad officially released on 28, January, 2010 (Beijing Time). But I know a new battle just begins. iPad, sounds somewhat like iPod and it really shares some similarities in terms of shape like smart, light and portable. It has a 9.7-inch, LED-backlit, IPS display with a remarkable precise Multi-Touch screen. And yet, at just 1.5 lbs and 0.5 inches thin, it's easy to carry and use everywhere. It can greatly facilitates your experience with the web, emails, photos and videos. Right now, it can run almost 140.000 of the apps on the Apple store. It can even run the apps you have downloaded for your iPhone or iPod touch. But so far, I haven't seen any possibility that it can work with DVD, probability there is no built-in DVD-ROM or DVD player which can play DVD directly. As Apple iPad states, the video formats supported are MPEG-4 (MP4, M4V), H.264, MOV etc and audio formats accepted are AAC, Proteceted AAC, MP3, AIFF and WAV etc, those are formats that are commonly used with iMac. This could really a hard nut to crack if you want to watch your favourite DVD on this magic Apple iPad. But don't worry, there is still way out, you just need a few steps for ripping and importing DVD movies to Apple iPad with a simple application DVD to iPad converter What's on DVD to iPad Converter for Mac DVD to iPad converter for Mac is a powerful and professional application designed for the newly released Apple iPad which can rip, convert your DVD contents to Apple iPad compatible MPEG-4 (MP4, M4V), H.264, MOV etc, and other popular file formats like AVI, WMV, MPG, MKV, VOB, 3GP, FLV etc can also be converted so that you can put on your portable devices like iPod, iPhone, iRiver, BlackBerry etc. Besides, it can also extract audio from DVD videos and save as MP3, AIFF, AAC, WAV etc. Mac DVD to iPad converter has also been enhanced that can run both on PowerPC and Intel (Snow Leopard included). It can offer versatile editing features which allows you to make your own DVD videos. For example, you can cut your DVD to whatever length you like by Trim, crop off unwanted parts from DVD clips by Crop, add special effect like Gray, Emboss and Old film to make your videos more artistic. Besides, its built-in merging feature and batch mode allows you to join several DVD clips into a single one and do batch conversion. And more features can be expected if you afford a few minutes to try.

  Read the article

• Google Chrome and Firefox Rendering

  - by user13503

  When attempting to visit sites running javascript, Google Chrome and Firefox often fail to render them properly. For example, when hitting google.com/codesearch results, I just get a blank page. http://img340.imageshack.us/img340/8527/200910071518.png This rendering problem happens in both browsers on a machine running Windows XP Professional x64. Internet explorer is able to render the page just fine. Also, controls on other pages sometimes fail to respond, for example in Google Docs. Has anyone encountered this issue before in Chrome/Firefox? Do they share a common installation of the V8 javascript engine? I'm baffled by this issue. Here's the source code for the image above that Chrome loads when attempting to retrieve the page: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"><html><head><script>function a(c){this.t={};this.tick=function(d,e,b){var f=b?b:(new Date).getTime();this.t[d]=[f,e]};this.tick("start",null,c)}var g=new a;window.jstiming={Timer:a,load:g};try{window.jstiming.pt=window.external.pageT}catch(h){}; </script><title></title><script language="javascript" src="/codesearch/js/CachedFile/F1A2CB189D0FCB1FF201C42BF6A5447C.cache.js"></script></head><body><iframe src="javascript:''" id="__gwt_historyFrame" style="width:0;height:0;border:0"></iframe><script>if(window.jstiming){window.jstiming.a={};window.jstiming.c=1;function k(a,d,f){var b=a.t[d];if(!b)return undefined;b=a.t[d][0];if(f!=undefined)var h=f;else h=a.t.start[0];return b-h}window.jstiming.report=function(a,d,f){var b="";if(window.jstiming.pt){b+="&srt="+window.jstiming.pt;delete window.jstiming.pt}try{if(window.external&&window.external.tran)b+="&tran="+window.external.tran}catch(h){}if(a.b)b+="&"+a.b;var e=a.t,p=e.start,l=[],i=[];for(var c in e)if(!(c=="start"))if(!(c.indexOf("_")==0)){var j= e[c][1];if(j)e[j]&&i.push(c+"."+k(a,c,e[j][0]));else p&&l.push(c+"."+k(a,c))}delete e.start;if(d)for(var m in d)b+="&"+m+"="+d[m];var n=[f?f:"http://csi.gstatic.com/csi","?v=3","&s="+(window.jstiming.sn?window.jstiming.sn:"codesearch")+"&action=",a.name,i.length?"&it="+i.join(",")+b:b,"&rt=",l.join(",")].join(""),g=new Image,o=window.jstiming.c++;window.jstiming.a[o]=g;g.onload=g.onerror=function(){delete window.jstiming.a[o]};g.src=n;g=null;return n}}; </script></body></html> Thanks, Steve

  Read the article

• Make mod_wsgi use python2.7.2 instead of python2.6?

  - by guron

  i am running Ubuntu 10.04.1 LTS and it came pre-packed with python2.6 but i need to replace it with python2.7.2. (The reason is simple, 2.7 has a lot of features backported from 3 ) i had installed python2.7.2 using ./configure make make altinstall the altinstall option installed it, without touching the system default version, to /usr/local/lib/python2.7 and placed the interpreter in /usr/local/bin/python2.7 Then to help mod_wsgi find python2.7 i added the following to /etc/apache2/sites-available/wsgisite WSGIPythonHome /usr/local i start apache and run a test wsgi app BUT i am greeted by python 2.6.5 and not Python2.7 Later i replaced the default python simlink to point to python 2.7 ln -f /usr/local/bin/python2.7 /usr/bin/python Now typing 'python' on the console opens python2.7 but somehow mod_wsgi still picks up python2.6 Next i tried, PATH=/usr/local/bin:$PATH export PATH then do a quick restart apache, but yet again its python2.6 !! Here is my $PATH /usr/local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games contents of /etc/apache2/sites-available/wsgisite WSGIPythonHome /usr/local <VirtualHost *:80> ServerName wsgitest.local DocumentRoot /home/wwwhost/pydocs/wsgi <Directory /home/wwwhost/pydocs/wsgi> Order allow,deny Allow from all </Directory> WSGIScriptAlias / /home/wwwhost/pydocs/wsgi/app.wsgi </VirtualHost> app.wsgi import sys def application(environ, start_response): status = '200 OK' output = sys.version response_headers = [('Content-type', 'text/plain'), ('Content-Length', str(len(output)))] start_response(status, response_headers) return [output] Apache error.log 'import site' failed; use -v for traceback [Sun Jun 19 00:27:21 2011] [info] mod_wsgi (pid=23235): Initializing Python. [Sun Jun 19 00:27:21 2011] [notice] Apache/2.2.14 (Ubuntu) mod_wsgi/2.8 Python/2.6.5 configured -- resuming normal operations [Sun Jun 19 00:27:21 2011] [info] Server built: Nov 18 2010 21:20:56 [Sun Jun 19 00:27:21 2011] [info] mod_wsgi (pid=23238): Attach interpreter ''. [Sun Jun 19 00:27:21 2011] [info] mod_wsgi (pid=23239): Attach interpreter ''. [Sun Jun 19 00:27:31 2011] [info] mod_wsgi (pid=23238): Create interpreter 'wsgitest.local|'. [Sun Jun 19 00:27:31 2011] [info] [client 192.168.1.205] mod_wsgi (pid=23238, process='', application='wsgitest.local|'): Loading WSGI script '/home/wwwhost/pydocs/$ [Sun Jun 19 00:27:50 2011] [info] mod_wsgi (pid=23239): Create interpreter 'wsgitest.local|'. Has anybody ever managed to make mod_wsgi run on a non-system default version of python ?

  Read the article

• Successfully concatenating multiple videos

  - by wiseguydigital

  My mission is to create videos out of old web slideshows. To start with I have jpegs and audio files that worked as Flash slideshows in an old system, structured such as this: Audio structure my_audio_1.mp3 (this file is a 3 second mp3 of silence) my_audio_2.mp3 my_audio_3.mp3 my_audio_4 etc... roughly 30 mp3s per slideshow Image structure my_image_1.jpg (this acts as the opening slide) my_image_2.jpg my_image_3.jpg my_image_4. etc... roughly 30 images per slideshow. As there are almost 100 slideshows that must be converted to video, I have created a web-based interface using PHP to automate the process, that sits on a local system and attempts to combine the files using shell_exec(). The process uses the following workflow: Loop through each slide and make an avi or mpeg. So for instance my_mini_video_2.avi would be a video that consists of my_image_2.jpg and has a soundtrack of my_audio_2.mp3. This slide would last the length of my_audio_2.mp3. Join / stitch / concat all of the mini videos to create the final video (Using a combination of cat and either mencoder or ffmpeg (I have also tried avimerge but to no avail). Transcode the new 'master' video to various formats such as flv etc. I thought this would be simple and have been close on many occasions but it still won't work. I can't get past stage 2 as I can't get a perfect 'master' video. I have now experimented with Mencoder, FFMpeg and seem to have been through every combination I can think of. The problem is that the audio and visuals never sync, no matter what I try. Also, I have even tried created audio-less mini videos, joining the MP3s into one long MP3 using both cat and mp3wrap and then assigning the new long MP3 as the audio track, but this always produces either a very short file or a badly slowed down file and makes the female voiceover sound like a male boxer!!! There appears to be no problems at all with the original files. Does anybody have any experience in producing a video successfully from the same kind of starting point? Or any ideas on what I may be doing wrong? As an example: If I create silent mini-videos, and stitch them together into 'temp-master.mpg' and then join the MP3s together into single MP3 called 'temp-master-audio.mp3', the audio file's duration is 09:10 and the video file's duration is 08:35. They should be the same and the audio will seem sloooow. I haven't posted code as I have written lots and lots of combinations.

  Read the article

• How to use jQuery Date Range Picker plugin in asp.net

  - by alaa9jo

  I stepped by this page: http://www.filamentgroup.com/lab/date_range_picker_using_jquery_ui_16_and_jquery_ui_css_framework/ and let me tell you,this is one of the best and coolest daterangepicker in the web in my opinion,they did a great job with extending the original jQuery UI DatePicker.Of course I made enhancements to the original plugin (fixed few bugs) and added a new option (Clear) to clear the textbox. In this article I well use that updated plugin and show you how to use it in asp.net..you will definitely like it. So,What do I need? 1- jQuery library : you can use 1.3.2 or 1.4.2 which is the latest version so far,in my article I will use the latest version. 2- jQuery UI library (1.8): As I mentioned earlier,daterangepicker plugin is based on the original jQuery UI DatePicker so that library should be included into your page. 3- jQuery DateRangePicker plugin : you can go to the author page or use the modified one (it's included in the attachment),in this article I will use the modified one. 4- Visual Studio 2005 or later : very funny :D,in my article I will use VS 2008. Note: in the attachment,I included all CSS and JS files so don't worry. How to use it? First thing,you will have to include all of the CSS and JS files into your page like this: <script src="Scripts/jquery-1.4.2.min.js" type="text/javascript"></script> <script src="Scripts/jquery-ui-1.8.custom.min.js" type="text/javascript"></script> <script src="Scripts/daterangepicker.jQuery.js" type="text/javascript"></script> <link href="CSS/redmond/jquery-ui-1.8.custom.css" rel="stylesheet" type="text/css" /> <link href="CSS/ui.daterangepicker.css" rel="stylesheet" type="text/css" /> <style type="text/css"> .ui-daterangepicker { font-size: 10px; } </style> Then add this html: <asp:TextBox ID="TextBox1" runat="server" Font-Size="10px"></asp:TextBox><asp:Button ID="SubmitButton" runat="server" Text="Submit" OnClick="SubmitButton_Click" /> <span>First Date:</span><asp:Label ID="FirstDate" runat="server"></asp:Label> <span>Second Date:</span><asp:Label ID="SecondDate" runat="server"></asp:Label> As you can see,it includes TextBox1 which we are going to attach the daterangepicker to it,2 labels to show you later on by code on how to read the date from the textbox and set it to the labels Now we have to attach the daterangepicker to the textbox by using jQuery (Note:visit the author's website for more info on daterangerpicker's options and how to use them): <script type="text/javascript"> $(function() { $("#<%= TextBox1.ClientID %>").attr("readonly", "readonly"); $("#<%= TextBox1.ClientID %>").attr("unselectable", "on"); $("#<%= TextBox1.ClientID %>").daterangepicker({ presetRanges: [], arrows: true, dateFormat: 'd M, yy', clearValue: '', datepickerOptions: { changeMonth: true, changeYear: true} }); }); </script> Finally,add this C# code: protected void SubmitButton_Click(object sender, EventArgs e) { if (TextBox1.Text.Trim().Length == 0) { return; } string selectedDate = TextBox1.Text; if (selectedDate.Contains("-")) { DateTime startDate; DateTime endDate; string[] splittedDates = selectedDate.Split("-".ToCharArray(), StringSplitOptions.RemoveEmptyEntries); if (splittedDates.Count() == 2 && DateTime.TryParse(splittedDates[0], out startDate) && DateTime.TryParse(splittedDates[1], out endDate)) { FirstDate.Text = startDate.ToShortDateString(); SecondDate.Text = endDate.ToShortDateString(); } else { //maybe the client has modified/altered the input i.e. hacking tools } } else { DateTime selectedDateObj; if (DateTime.TryParse(selectedDate, out selectedDateObj)) { FirstDate.Text = selectedDateObj.ToShortDateString(); SecondDate.Text = string.Empty; } else { //maybe the client has modified/altered the input i.e. hacking tools } } } This is the way on how to read from the textbox,That's it!. FAQ: 1-Why did you add this code?: <style type="text/css"> .ui-daterangepicker { font-size: 10px; } </style> A:For two reasons: 1)To show the Daterangepicker in a smaller size because it's original size is huge 2)To show you how to control the size of it. 2- Can I change the theme? A: yes you can,you will notice that I'm using Redmond theme which you will find it in jQuery UI website,visit their website and download a different theme,you may also have to make modifications to the css of daterangepicker,it's all yours. 3- Why did you add a font size to the textbox? A: To make the design look better,try to remove it and see by your self. 4- Can I register the script at codebehind? A: yes you can 5- I see you have added these two lines,what they do? $("#<%= TextBox1.ClientID %>").attr("readonly", "readonly"); $("#<%= TextBox1.ClientID %>").attr("unselectable", "on"); A:The first line will make the textbox not editable by the user,the second will block the blinking typing cursor from appearing if the user clicked on the textbox,you will notice that both lines are necessary to be used together,you can't just use one of them...for logical reasons of course. Finally,I hope everyone liked the article and as always,your feedbacks are always welcomed and if anyone have any suggestions or made any modifications that might be useful for anyone else then please post it at at the author's website and post a reference to your post here.

  Read the article

• How to Animate Text and Objects in PowerPoint 2010

  - by DigitalGeekery

  Are you looking for an eye catching way to keep your audience interested in your PowerPoint presentations? Today we’ll take a look at how to add animation effects to objects in PowerPoint 2010. Select the object you wish to animate and then click the More button in the Animation group of the Animation tab.   Animations are grouped into four categories. Entrance effects, Exit effects, Emphasis effects, and Motion Paths. You can get a Live Preview of how the animation will look by hovering your mouse over an animation effect.   When you select a Motion Path, your object will move along the dashed path line as shown on the screen. (This path is not displayed in the final output) Certain aspects of the Motion Path effects are editable. When you apply a Motion Path animation to an object, you can select the path and drag the end to change the length or size of the path. The green marker along the motion path marks the beginning of the  path and the red marks the end. The effects can be rotated by clicking and the bar near the center of the effect.   You can display additional effects by choosing one of the options at the bottom. This will pop up a Change Effect window. If you have Preview Effect checked at the lower left you can preview the effects by single clicking.   Apply Multiple Animations to an Object Select the object and then click the Add Animation button to display the animation effects. Just as we did with the first effect, you can hover over to get a live preview. Click to apply the effect. The animation effects will happen in the order they are applied. Animation Pane You can view a list of the animations applied to a slide by opening the Animation Pane. Select the Animation Pane button from the Advanced Animation group to display the Animation Pane on the right. You’ll see that each animation effect in the animation pane has an assigned number to the left.    Timing Animation Effects You can change when your animation starts to play. By default it is On Click. To change it, select the effect in the Animation Pane and then choose one of the options from the Start dropdown list. With Previous starts at the same time as the previous animation and After Previous starts after the last animation. You can also edit the duration that the animations plays and also set a delay.   You can change the order in which the animation effects are applied by selecting the effect in the animation pane and clicking Move Earlier or Move Later from the Timing group on the Animation tab. Effect Options If the Effect Options button is available when your animation is selected, then that particular animation has some additional effect settings that can be configured. You can access the Effect Option by right-clicking on the the animation in the Animation Pane, or by selecting Effect Options on the ribbon.   The available options will vary by effect and not all animation effects will have Effect Options settings. In the example below, you can change the amount of spinning and whether the object will spin clockwise or counterclockwise.   Under Enhancements, you can add sound effects to your animation. When you’re finished click OK.   Animating Text Animating Text works the same as animating an object. Simply select your text box and choose an animation. Text does have some different Effect Options. By selecting a sequence, you decide whether the text appears as one object, all at once, or by paragraph. As is the case with objects, there will be different available Effect Options depending on the animation you choose. Some animations, such as the Fly In animation, will have directional options.   Testing Your Animations Click on the Preview button at any time to test how your animations look. You can also select the Play button on the Animation Pane. Conclusion Animation effects are a great way to focus audience attention on important points and hold viewers interest in your PowerPoint presentations. Another cool way to spice up your PPT 2010 presentations is to add video from the web. What tips do you guys have for making your PowerPoint presentations more interesting? Similar Articles Productive Geek Tips Center Pictures and Other Objects in Office 2007 & 2010Preview Before You Paste with Live Preview in Office 2010Embed True Type Fonts in Word and PowerPoint 2007 DocumentsHow to Add Video from the Web in PowerPoint 2010Add Artistic Effects to Your Pictures in Office 2010 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials

  Read the article

• If You Could Cut Your Meeting Times in ½ Would You?

  - by Brian Dayton

                  I know it sounds like a big promise. And what I'm thinking about may not cut a :60 minute meeting into :30 minutes, but it could make meetings and interactions up to 2X more productive. How? Social Media for the Enterprise, Not Social Media In the Enterprise Bear with me. I'm not talking about whether or not workers should or shouldn't have access to Facebook on corporate networks. That topic has been discussed @ length. I'm also not talking about the direct benefits of Social Networking tools like Presence (the ability to see someone online and ask a question in real-time), blogs, RSS feeds or external tools like Twitter. The Un-Measurable Benefits Would you do something that you believe will have a positive effect--but can't be measured? It's impossible to quantify the effectiveness of a meeting. However, what I am talking about would be more of a byproduct of all of the social networking tools above. Here's the hypothesis: As I've gotten more and more busy with work, family, travel and kids--and the same has happened to my friends and family--I'm less and less connected. But by introducing Facebook to my life I've not only made connections with longtime friends whom I haven't spoken to in years--but I've increased the pace and quality of interactions, on and offline, with close friends who I see and speak to every week. In some cases it even enhances the connections and interactions with those I see or speak to every day. The same holds true in an organization. Especially a larger one with highly matrixed organizational structures. You work with people on a project, new people come in with each different project and a disproportionate amount of time is spent getting oriented and staying current. Going back to the initial value proposition--making meetings shorter/more effective--a large amount of time is spent: -          At Project Kick-off: Meeting and understanding team member's histories, goals & roles -          Ongoing: Summarizing events since the last meeting or update email In my personal, Facebook life today I know that: -          My best friend from college - has been stranded in India for 5 days because of the volcano in Iceland and is now only 250 miles from home -          One of my co-workers started conference calls at 6:30 this morning -          My wife wasn't terribly pleased with my painting skills in our new bathroom (disclosure: she told me this face to face too) Strengthening Weak Links A recent article in CIO Magazine, Three Dangerous Social Media Misconceptions (Kristen Burnham, March 12, 2010) calls out the #1 misconception as follows: 1. "Face-to-face relationships are far more valuable than virtual ones." While some level of physical interaction will always add value to relationships, Gartner says that come 2020, most relationships and teams will be based on "weak links"--that is, you may not have personally met a contact, but you'll know of or may have interacted with him via social sites like Facebook, LinkedIn and Twitter. The sooner your enterprise adopts these tools, the sooner your employees will learn them, and the sooner you'll begin to cultivate these relationships-of-the-future.   I personally believe that it's not an either/or choice between face-to-face and virtual interactions. In fact, I'll be as bold as saying it doesn't matter. I can point to two extremely valuable work relationships that I've had over the past 5 years: -          I shared an office with one of them -          I met the other person, face-to-face, only once Both relationships were very productive. The dynamics were similar. The communication tactics differed immensely. What does matter is the quality, frequency and relevance of interactions. Still sound like too much? An over-promise? Stay tuned for my next post The Gap Between Facebook and LinkedIn. I'll also connect some of the dots with where Oracle Applications and technologies are headed.        

  Read the article

• Computer Networks UNISA - Chap 12 &ndash; Networking Security

  - by MarkPearl

  After reading this section you should be able to Identify security risks in LANs and WANs and design security policies that minimize risks Explain how physical security contributes to network security Discuss hardware and design based security techniques Understand methods of encryption such as SSL and IPSec, that can secure data in storage and in transit Describe how popular authentication protocols such as RADIUS< TACACS,Kerberos, PAP, CHAP, and MS-CHAP function Use network operating system techniques to provide basic security Understand wireless security protocols such as WEP, WPA and 802.11i Security Audits Before spending time and money on network security, examine your networks security risks – rate and prioritize risks. Different organizations have different levels of network security requirements. Security Risks Not all security breaches result from a manipulation of network technology – there are human factors that can play a role as well. The following categories are areas of considerations… Risks associated with People Risks associated with Transmission and Hardware Risks associated with Protocols and Software Risks associated with Internet Access An effective security policy A security policy identifies your security goals, risks, levels of authority, designated security coordinator and team members, responsibilities for each team member, and responsibilities for each employee. In addition it specifies how to address security breaches. It should not state exactly which hardware, software, architecture, or protocols will be used to ensure security, nor how hardware or software will be installed and configured. A security policy must address an organizations specific risks. to understand your risks, you should conduct a security audit that identifies vulnerabilities and rates both the severity of each threat and its likelihood of occurring. Security Policy Content Security policy content should… Policies for each category of security Explain to users what they can and cannot do and how these measures protect the networks security Should define what confidential means to the organization Response Policy A security policy should provide for a planned response in the event of a security breach. The response policy should identify the members of a response team, all of whom should clearly understand the the security policy, risks, and measures in place. Some of the roles concerned could include… Dispatcher – the person on call who first notices the breach Manager – the person who coordinates the resources necessary to solve the problem Technical Support Specialist – the person who focuses on solving the problem Public relations specialist – the person who acts as the official spokesperson for the organization Physical Security An important element in network security is restricting physical access to its components. There are various techniques for this including locking doors, security people at access points etc. You should identify the following… Which rooms contain critical systems or data and must be secured Through what means might intruders gain access to these rooms How and to what extent are authorized personnel granted access to these rooms Are authentication methods such as ID cards easy to forge etc. Security in Network Design The optimal way to prevent external security breaches from affecting you LAN is not to connect your LAN to the outside world at all. The next best protection is to restrict access at every point where your LAN connects to the rest of the world. Router Access List – can be used to filter or decline access to a portion of a network for certain devices. Intrusion Detection and Prevention While denying someone access to a section of the network is good, it is better to be able to detect when an attempt has been made and notify security personnel. This can be done using IDS (intrusion detection system) software. One drawback of IDS software is it can detect false positives – i.e. an authorized person who has forgotten his password attempts to logon. Firewalls A firewall is a specialized device, or a computer installed with specialized software, that selectively filters or blocks traffic between networks. A firewall typically involves a combination of hardware and software and may reside between two interconnected private networks. The simplest form of a firewall is a packet filtering firewall, which is a router that examines the header of every packet of data it receives to determine whether that type of packet is authorized to continue to its destination or not. Firewalls can block traffic in and out of a LAN. NOS (Network Operating System) Security Regardless of the operating system, generally every network administrator can implement basic security by restricting what users are authorized to do on a network. Some of the restrictions include things related to Logons – place, time of day, total time logged in, etc Passwords – length, characters used, etc Encryption Encryption is the use of an algorithm to scramble data into a format that can be read only by reversing the algorithm. The purpose of encryption is to keep information private. Many forms of encryption exist and new ways of cracking encryption are continually being invented. The following are some categories of encryption… Key Encryption PGP (Pretty Good Privacy) SSL (Secure Sockets Layer) SSH (Secure Shell) SCP (Secure CoPy) SFTP (Secure File Transfer Protocol) IPSec (Internet Protocol Security) For a detailed explanation on each section refer to pages 596 to 604 of textbook Authentication Protocols Authentication protocols are the rules that computers follow to accomplish authentication. Several types exist and the following are some of the common authentication protocols… RADIUS and TACACS PAP (Password Authentication Protocol) CHAP and MS-CHAP EAP (Extensible Authentication Protocol) 802.1x (EAPoL) Kerberos Wireless Network Security Wireless transmissions are particularly susceptible to eavesdropping. The following are two wireless network security protocols WEP WPA

  Read the article

• 6 Interesting Facts About NASA’s Mars Rover ‘Curiosity’

  - by Gopinath

  Humans quest for exploring the surrounding planets to see whether we can live there or not is taking new shape today. NASA’s Mars probing robot, Curiosity, blasted off today on its 9 months journey to reach Mars and explore it for the possibilities of life there. Scientist says that Curiosity is one most advanced rover ever launched to probe life on other planets. Here is the launch video and some analysis by a news reporter Lets look at the 6 interesting facts about the mission 1. It’s as big as a car Curiosity is the biggest ever rover ever launched by NASA to probe life on outer planets. It’s as big as a car and almost double the size of its predecessor rover Spirit. The length of Curiosity is around 9 feet 10 inches(3 meters), width is 9 feet 1 inch (2.8 meters) and height is 7 feet (2.1 meters). 2. Powered by Plutonium – Lasts 24×7 for 23 months The earlier missions of NASA to explore Mars are powered by Solar power and that hindered capabilities of the rovers to move around when the Sun is hiding. Due to dependency of Sun the earlier rovers were not able to traverse the places where there is no Sun light. Curiosity on the other hand is equipped with a radioisotope power system that generates electricity from the heat emitted by plutonium’s radioactive decay. The plutonium weighs around 10 pounds and can generate power required for operating the rover close to 23 weeks. The best part of the new power system is, Curiosity can roam around in darkness, light and all year around. 3. Rocket powered backpack for a science fiction style landing The Curiosity is so heavy that NASA could not use parachute and balloons to air-drop the rover on the surface of Mars like it’s previous missions. They are trying out a new science fiction style air-dropping mechanism that is similar to sky crane heavy-lift helicopter. The landing of the rover begins first with entry into the Mars atmosphere protected by a heat shield. At about 6 miles to the surface, the heat shield is jettisoned and a parachute is deployed to glide the rover smoothly. When the rover touches 3 miles above the surface, the parachute is jettisoned and the eight motors rocket backpack is used for a smooth and impact free landing as shown in the image. Here is an animation created by NASA on the landing sequence. If you are interested in getting more detailed information about the landing process check this landing sequence picture available on NASA website 4. Equipped with Star Wars style laser gun Hollywood movie directors and novelist always imagined aliens coming to earth with spaceships full of laser guns and blasting the objects which comes on their way. With Curiosity the equations are going to change. It has a powerful laser gun equipped in one of it’s arms to beam laser on rocks to vaporize them. This is not part of any assault mission Curiosity is expected to carry out, the laser gun is will be used to carry out experiments to detect life and understand nature. 5. Most sophisticated laboratory powered by 10 instruments Around 10 state of art instruments are part of Curiosity rover and the these 10 instruments form a most advanced rover based lab ever built by NASA. There are instruments to cut through rocks to examine them and other instruments will search for organic compounds. Mounted cameras can study targets from a distance, arm mounted instruments can study the targets they touch. Microscopic lens attached to the arm can see and magnify tiny objects as tiny as 12.5 micro meters. 6. Rover Carrying 1.24 million names etched on silicon Early June 2009 NASA launched a campaign called “Send Your Name to Mars” and around 1.24 million people registered their names through NASA’s website. All those 1.24 million names are etched on Silicon chips mounted onto Curiosity’s deck. If you had registered your name in the campaign may be your name is going to reach Mars soon. Curiosity On Web If you wish to follow the mission here are few links to help you NASA’s Curiosity Web Page Follow Curiosity on Facebook Follow @MarsCuriosity on Twitter Artistic Gallery Image of Mars Rover Curiosity A printable sheet of Curiosity Mission [pdf] Images credit: NASA This article titled,6 Interesting Facts About NASA’s Mars Rover ‘Curiosity’, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• Tweaking a few URL validation settings on ASP.NET v4.0

  - by Carlyle Dacosta

  ASP.NET has a few default settings for URLs out of the box. These can be configured quite easily in the web.config file within the  <system.web>/<httpRuntime> configuration section. Some of these are: <httpRuntime maxUrlLength=”<number here>”. This number should be an integer value (defaults to 260 characters). The value must be greater than or equal to zero, though obviously small values will lead to an un-useable website. This attribute gates the length of the Url without query string. <httpRuntime maxQueryStringLength=”<number here>”. This number should be an integer value (defaults to 2048 characters). The value must be greater than or equal to zero, though obviously small values will lead to an un-useable website. <httpRuntime requestPathInvalidCharacters=”List of characters you need included in ASP.NETs validation checks”. By default the characters are “<,>,*,%,&,:,\,?”. However once can easily change this by setting by modifying web.config. Remember, these characters can be specified in a variety of formats. For example, I want the character ‘!’ to be included in ASP.NETs URL validation logic. So I set the following: <httpRuntime requestPathInvalidCharacters=”<,>,*,%,&,:,\,?,!”. A character could also be specified in its xml encoded form. ‘&lt;;’ would mean the ‘<’ sign). I could specify the ‘!’ in its xml encoded unicode format such as requestPathInvalidCharacters=”<,>,*,%,&,:,\,?,$#x0021;” or I could specify it in its unicode encoded form or in the “<,>,*,%,&,:,\,?,%u0021” format. The following settings can be applied at Root Web.Config level, App Web.config level, Folder level or within a location tag: <location path="some path here"> <system.web> <httpRuntime maxUrlLength="" maxQueryStringLength="" requestPathInvalidChars="" .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } If any of the above settings fail request validation, an Http 400 “Bad Request” HttpException is thrown. These can be easily handled on the Application_Error handler on Global.asax.   Also, a new attribute in <httpRuntime /> called “relaxedUrlToFileSystemMapping” has been added with a default of false. <httpRuntime … relaxedUrlToFileSystemMapping="true|false" /> When the relaxedUrlToFileSystemMapping attribute is set to false inbound Urls still need to be valid NTFS file paths. For example Urls (sans query string) need to be less than 260 characters; no path segment within a Url can use old-style DOS device names (LPT1, COM1, etc…); Urls must be valid Windows file paths. A url like “http://digg.com/http://cnn.com” should work with this attribute set to true (of course a few characters will need to be unblocked by removing them from requestPathInvalidCharacters="" above). Managed configuration for non-NTFS-compliant Urls is determined from the first valid configuration path found when walking up the path segments of the Url. For example, if the request Url is "/foo/bar/baz/<blah>data</blah>", and there is a web.config in the "/foo/bar" directory, then the managed configuration for the request comes from merging the configuration hierarchy to include the web.config from "/foo/bar". The value of the public property HttpRequest.PhysicalPath is set to [physical file path of the application root] + "REQUEST_URL_IS_NOT_A_VALID_FILESYSTEM_PATH". For example, given a request Url like "/foo/bar/baz/<blah>data</blah>", where the application root is "/foo/bar" and the physical file path for that root is "c:\inetpub\wwwroot\foo\bar", then PhysicalPath would be "c:\inetpub\wwwroot\foo\bar\ REQUEST_URL_IS_NOT_A_VALID_FILESYSTEM_PATH". Carl Dacosta ASP.NET QA Team

  Read the article

• Trace File Source Adapter

  The Trace File Source adapter is a useful addition to your SSIS toolbox.  It allows you to read 2005 and 2008 profiler traces stored as .trc files and read them into the Data Flow.  From there you can perform filtering and analysis using the power of SSIS. There is no need for a SQL Server connection this just uses the trace file. Example Usages Cache warming for SQL Server Analysis Services Reading the flight recorder Find out the longest running queries on a server Analyze statements for CPU, memory by user or some other criteria you choose Properties The Trace File Source adapter has two properties, both of which combine to control the source trace file that is read at runtime. SQL Server 2005 and SQL Server 2008 trace files are supported for both the Database Engine (SQL Server) and Analysis Services. The properties are managed by the Editor form or can be set directly from the Properties Grid in Visual Studio. Property Type Description AccessMode Enumeration This property determines how the Filename property is interpreted. The values available are: DirectInput Variable Filename String This property holds the path for trace file to load (*.trc). The value is either a full path, or the name of a variable which contains the full path to the trace file, depending on the AccessMode property. Trace Column Definition Hopefully the majority of you can skip this section entirely, but if you encounter some problems processing a trace file this may explain it and allow you to fix the problem. The component is built upon the trace management API provided by Microsoft. Unfortunately API methods that expose the schema of a trace file have known issues and are unreliable, put simply the data often differs from what was specified. To overcome these limitations the component uses  some simple XML files. These files enable the trace column data types and sizing attributes to be overridden. For example SQL Server Profiler or TMO generated structures define EventClass as an integer, but the real value is a string. TraceDataColumnsSQL.xml  - SQL Server Database Engine Trace Columns TraceDataColumnsAS.xml    - SQL Server Analysis Services Trace Columns The files can be found in the %ProgramFiles%\Microsoft SQL Server\100\DTS\PipelineComponents folder, e.g. "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsSQL.xml" "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml" If at runtime the component encounters a type conversion or sizing error it is most likely due to a discrepancy between the column definition as reported by the API and the actual value encountered. Whilst most common issues have already been fixed through these files we have implemented specific exception traps to direct you to the files to enable you to fix any further issues due to different usage or data scenarios that we have not tested. An example error that you can fix through these files is shown below. Buffer exception writing value to column 'Column Name'. The string value is 999 characters in length, the column is only 111. Columns can be overridden by the TraceDataColumns XML files in "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml". Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Finally you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Trace File Source transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations. Please note that the Microsoft Trace classes used in the component are not supported on 64-bit platforms. To use the Trace File Source on a 64-bit host you need to ensure you have the 32-bit (x86) tools available, and the way you execute your package is setup to use them, please see the help topic 64-bit Considerations for Integration Services for more details. Downloads Trace Sources for SQL Server 2005 -- Trace Sources for SQL Server 2008 Version History SQL Server 2008 Version 2.0.0.382 - SQL Sever 2008 public release. (9 Apr 2009) SQL Server 2005 Version 1.0.0.321 - SQL Server 2005 public release. (18 Nov 2008) -- Screenshots

  Read the article

• SQL SERVER – PAGEIOLATCH_DT, PAGEIOLATCH_EX, PAGEIOLATCH_KP, PAGEIOLATCH_SH, PAGEIOLATCH_UP – Wait Type – Day 9 of 28

  - by pinaldave

  It is very easy to say that you replace your hardware as that is not up to the mark. In reality, it is very difficult to implement. It is really hard to convince an infrastructure team to change any hardware because they are not performing at their best. I had a nightmare related to this issue in a deal with an infrastructure team as I suggested that they replace their faulty hardware. This is because they were initially not accepting the fact that it is the fault of their hardware. But it is really easy to say “Trust me, I am correct”, while it is equally important that you put some logical reasoning along with this statement. PAGEIOLATCH_XX is such a kind of those wait stats that we would directly like to blame on the underlying subsystem. Of course, most of the time, it is correct – the underlying subsystem is usually the problem. From Book On-Line: PAGEIOLATCH_DT Occurs when a task is waiting on a latch for a buffer that is in an I/O request. The latch request is in Destroy mode. Long waits may indicate problems with the disk subsystem. PAGEIOLATCH_EX Occurs when a task is waiting on a latch for a buffer that is in an I/O request. The latch request is in Exclusive mode. Long waits may indicate problems with the disk subsystem. PAGEIOLATCH_KP Occurs when a task is waiting on a latch for a buffer that is in an I/O request. The latch request is in Keep mode. Long waits may indicate problems with the disk subsystem. PAGEIOLATCH_SH Occurs when a task is waiting on a latch for a buffer that is in an I/O request. The latch request is in Shared mode. Long waits may indicate problems with the disk subsystem. PAGEIOLATCH_UP Occurs when a task is waiting on a latch for a buffer that is in an I/O request. The latch request is in Update mode. Long waits may indicate problems with the disk subsystem. PAGEIOLATCH_XX Explanation: Simply put, this particular wait type occurs when any of the tasks is waiting for data from the disk to move to the buffer cache. ReducingPAGEIOLATCH_XX wait: Just like any other wait type, this is again a very challenging and interesting subject to resolve. Here are a few things you can experiment on: Improve your IO subsystem speed (read the first paragraph of this article, if you have not read it, I repeat that it is easy to say a step like this than to actually implement or do it). This type of wait stats can also happen due to memory pressure or any other memory issues. Putting aside the issue of a faulty IO subsystem, this wait type warrants proper analysis of the memory counters. If due to any reasons, the memory is not optimal and unable to receive the IO data. This situation can create this kind of wait type. Proper placing of files is very important. We should check file system for the proper placement of files – LDF and MDF on separate drive, TempDB on separate drive, hot spot tables on separate filegroup (and on separate disk), etc. Check the File Statistics and see if there is higher IO Read and IO Write Stall SQL SERVER – Get File Statistics Using fn_virtualfilestats. It is very possible that there are no proper indexes on the system and there are lots of table scans and heap scans. Creating proper index can reduce the IO bandwidth considerably. If SQL Server can use appropriate cover index instead of clustered index, it can significantly reduce lots of CPU, Memory and IO (considering cover index has much lesser columns than cluster table and all other it depends conditions). You can refer to the two articles’ links below previously written by me that talk about how to optimize indexes. Create Missing Indexes Drop Unused Indexes Updating statistics can help the Query Optimizer to render optimal plan, which can only be either directly or indirectly. I have seen that updating statistics with full scan (again, if your database is huge and you cannot do this – never mind!) can provide optimal information to SQL Server optimizer leading to efficient plan. Checking Memory Related Perfmon Counters SQLServer: Memory Manager\Memory Grants Pending (Consistent higher value than 0-2) SQLServer: Memory Manager\Memory Grants Outstanding (Consistent higher value, Benchmark) SQLServer: Buffer Manager\Buffer Hit Cache Ratio (Higher is better, greater than 90% for usually smooth running system) SQLServer: Buffer Manager\Page Life Expectancy (Consistent lower value than 300 seconds) Memory: Available Mbytes (Information only) Memory: Page Faults/sec (Benchmark only) Memory: Pages/sec (Benchmark only) Checking Disk Related Perfmon Counters Average Disk sec/Read (Consistent higher value than 4-8 millisecond is not good) Average Disk sec/Write (Consistent higher value than 4-8 millisecond is not good) Average Disk Read/Write Queue Length (Consistent higher value than benchmark is not good) Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All of the discussions of Wait Stats in this blog is generic and varies from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

  Read the article

• SQL SERVER – LCK_M_XXX – Wait Type – Day 15 of 28

  - by pinaldave

  Locking is a mechanism used by the SQL Server Database Engine to synchronize access by multiple users to the same piece of data, at the same time. In simpler words, it maintains the integrity of data by protecting (or preventing) access to the database object. From Book On-Line: LCK_M_BU Occurs when a task is waiting to acquire a Bulk Update (BU) lock. LCK_M_IS Occurs when a task is waiting to acquire an Intent Shared (IS) lock. LCK_M_IU Occurs when a task is waiting to acquire an Intent Update (IU) lock. LCK_M_IX Occurs when a task is waiting to acquire an Intent Exclusive (IX) lock. LCK_M_S Occurs when a task is waiting to acquire a Shared lock. LCK_M_SCH_M Occurs when a task is waiting to acquire a Schema Modify lock. LCK_M_SCH_S Occurs when a task is waiting to acquire a Schema Share lock. LCK_M_SIU Occurs when a task is waiting to acquire a Shared With Intent Update lock. LCK_M_SIX Occurs when a task is waiting to acquire a Shared With Intent Exclusive lock. LCK_M_U Occurs when a task is waiting to acquire an Update lock. LCK_M_UIX Occurs when a task is waiting to acquire an Update With Intent Exclusive lock. LCK_M_X Occurs when a task is waiting to acquire an Exclusive lock. LCK_M_XXX Explanation: I think the explanation of this wait type is the simplest. When any task is waiting to acquire lock on any resource, this particular wait type occurs. The common reason for the task to be waiting to put lock on the resource is that the resource is already locked and some other operations may be going on within it. This wait also indicates that resources are not available or are occupied at the moment due to some reasons. There is a good chance that the waiting queries start to time out if this wait type is very high. Client application may degrade the performance as well. You can use various methods to find blocking queries: EXEC sp_who2 SQL SERVER – Quickest Way to Identify Blocking Query and Resolution – Dirty Solution DMV – sys.dm_tran_locks DMV – sys.dm_os_waiting_tasks Reducing LCK_M_XXX wait: Check the Explicit Transactions. If transactions are very long, this wait type can start building up because of other waiting transactions. Keep the transactions small. Serialization Isolation can build up this wait type. If that is an acceptable isolation for your business, this wait type may be natural. The default isolation of SQL Server is ‘Read Committed’. One of my clients has changed their isolation to “Read Uncommitted”. I strongly discourage the use of this because this will probably lead to having lots of dirty data in the database. Identify blocking queries mentioned using various methods described above, and then optimize them. Partition can be one of the options to consider because this will allow transactions to execute concurrently on different partitions. If there are runaway queries, use timeout. (Please discuss this solution with your database architect first as timeout can work against you). Check if there is no memory and IO-related issue using the following counters: Checking Memory Related Perfmon Counters SQLServer: Memory Manager\Memory Grants Pending (Consistent higher value than 0-2) SQLServer: Memory Manager\Memory Grants Outstanding (Consistent higher value, Benchmark) SQLServer: Buffer Manager\Buffer Hit Cache Ratio (Higher is better, greater than 90% for usually smooth running system) SQLServer: Buffer Manager\Page Life Expectancy (Consistent lower value than 300 seconds) Memory: Available Mbytes (Information only) Memory: Page Faults/sec (Benchmark only) Memory: Pages/sec (Benchmark only) Checking Disk Related Perfmon Counters Average Disk sec/Read (Consistent higher value than 4-8 millisecond is not good) Average Disk sec/Write (Consistent higher value than 4-8 millisecond is not good) Average Disk Read/Write Queue Length (Consistent higher value than benchmark is not good) Read all the post in the Wait Types and Queue series. Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All the discussion of Wait Stats in this blog is generic and varies from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

  Read the article

• Tweaking a few URL validation settings on ASP.NET v4.0

  - by Carlyle Dacosta

  ASP.NET has a few default settings for URLs out of the box. These can be configured quite easily in the web.config file within the  <system.web>/<httpRuntime> configuration section. Some of these are: <httpRuntime maxUrlLength=”<number here>” This number should be an integer value (defaults to 260 characters). The value must be greater than or equal to zero, though obviously small values will lead to an un-useable website. This attribute gates the length of the Url without query string. <httpRuntime maxQueryStringLength=”<number here>”. This number should be an integer value (defaults to 2048 characters). The value must be greater than or equal to zero, though obviously small values will lead to an un-useable website. <httpRuntime requestPathInvalidCharacters=”List of characters you need included in ASP.NETs validation checks” /> By default the characters are “<,>,*,%,&,:,\,?”. However once can easily change this by setting by modifying web.config. Remember, these characters can be specified in a variety of formats. For example, I want the character ‘!’ to be included in ASP.NETs URL validation logic. So I set the following: <httpRuntime requestPathInvalidCharacters=”<,>,*,%,&,:,\,?,!”. A character could also be specified in its xml encoded form. ‘&lt;;’ would mean the ‘<’ sign). I could specify the ‘!’ in its xml encoded unicode format such as requestPathInvalidCharacters=”<,>,*,%,&,:,\,?,$#x0021;” or I could specify it in its unicode encoded form or in the “<,>,*,%,&,:,\,?,%u0021” format. The following settings can be applied at Root Web.Config level, App Web.config level, Folder level or within a location tag: <location path="some path here"> <system.web> <httpRuntime maxUrlLength="" maxQueryStringLength="" requestPathInvalidChars="" /> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } If any of the above settings fail request validation, an Http 400 “Bad Request” HttpException is thrown. These can be easily handled on the Application_Error handler on Global.asax.   Also, a new attribute in <httpRuntime /> called “relaxedUrlToFileSystemMapping” has been added with a default of false. <httpRuntime … relaxedUrlToFileSystemMapping="true|false" /> When the relaxedUrlToFileSystemMapping attribute is set to false inbound Urls still need to be valid NTFS file paths. For example Urls (sans query string) need to be less than 260 characters; no path segment within a Url can use old-style DOS device names (LPT1, COM1, etc…); Urls must be valid Windows file paths. A url like “http://digg.com/http://cnn.com” should work with this attribute set to true (of course a few characters will need to be unblocked by removing them from requestPathInvalidCharacters="" above). Managed configuration for non-NTFS-compliant Urls is determined from the first valid configuration path found when walking up the path segments of the Url. For example, if the request Url is "/foo/bar/baz/<blah>data</blah>", and there is a web.config in the "/foo/bar" directory, then the managed configuration for the request comes from merging the configuration hierarchy to include the web.config from "/foo/bar". The value of the public property HttpRequest.PhysicalPath is set to [physical file path of the application root] + "REQUEST_URL_IS_NOT_A_VALID_FILESYSTEM_PATH". For example, given a request Url like "/foo/bar/baz/<blah>data</blah>", where the application root is "/foo/bar" and the physical file path for that root is "c:\inetpub\wwwroot\foo\bar", then PhysicalPath would be "c:\inetpub\wwwroot\foo\bar\ REQUEST_URL_IS_NOT_A_VALID_FILESYSTEM_PATH".

  Read the article

• System locking up with suspicious messages about hard disk

  - by Chris Conway

  My system has started behaving strangely, intermittently locking up. I see messages like the following in syslog: Nov 18 22:22:00 claypool kernel: [ 3428.078156] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Nov 18 22:22:00 claypool kernel: [ 3428.078163] ata3.00: irq_stat 0x40000000 Nov 18 22:22:00 claypool kernel: [ 3428.078167] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00 Nov 18 22:22:00 claypool kernel: [ 3428.078182] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 Nov 18 22:22:00 claypool kernel: [ 3428.078184] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) Nov 18 22:22:00 claypool kernel: [ 3428.078188] ata3.00: status: { DRDY } Nov 18 22:22:00 claypool kernel: [ 3428.080887] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Nov 18 22:22:00 claypool kernel: [ 3428.080890] ata3.00: irq_stat 0x40000000 Nov 18 22:22:00 claypool kernel: [ 3428.080893] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00 Nov 18 22:22:00 claypool kernel: [ 3428.080905] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 Nov 18 22:22:00 claypool kernel: [ 3428.080906] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) Nov 18 22:22:00 claypool kernel: [ 3428.080910] ata3.00: status: { DRDY } And then this: Nov 18 23:13:56 claypool kernel: [ 6544.000798] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Nov 18 23:13:56 claypool kernel: [ 6544.000804] ata1.00: failed command: FLUSH CACHE EXT Nov 18 23:13:56 claypool kernel: [ 6544.000814] ata1.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 Nov 18 23:13:56 claypool kernel: [ 6544.000815] res 40/00:00:00:4f:c2/00:00:00:00:00/40 Emask 0x4 (timeout) Nov 18 23:13:56 claypool kernel: [ 6544.000819] ata1.00: status: { DRDY } Nov 18 23:13:56 claypool kernel: [ 6544.000825] ata1: hard resetting link Nov 18 23:14:01 claypool kernel: [ 6549.360324] ata1: link is slow to respond, please be patient (ready=0) Nov 18 23:14:06 claypool kernel: [ 6554.008091] ata1: COMRESET failed (errno=-16) Nov 18 23:14:06 claypool kernel: [ 6554.008103] ata1: hard resetting link Nov 18 23:14:11 claypool kernel: [ 6559.372246] ata1: link is slow to respond, please be patient (ready=0) Nov 18 23:14:16 claypool kernel: [ 6564.020228] ata1: COMRESET failed (errno=-16) Nov 18 23:14:16 claypool kernel: [ 6564.020235] ata1: hard resetting link Nov 18 23:14:21 claypool kernel: [ 6569.380109] ata1: link is slow to respond, please be patient (ready=0) Nov 18 23:14:31 claypool kernel: [ 6579.460243] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Nov 18 23:14:31 claypool kernel: [ 6579.486595] ata1.00: configured for UDMA/133 Nov 18 23:14:31 claypool kernel: [ 6579.486601] ata1.00: retrying FLUSH 0xea Emask 0x4 Nov 18 23:14:31 claypool kernel: [ 6579.486939] ata1.00: device reported invalid CHS sector 0 Nov 18 23:14:31 claypool kernel: [ 6579.486952] ata1: EH complete Nov 18 23:17:01 claypool CRON[3910]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Nov 18 23:17:01 claypool CRON[3908]: (CRON) error (grandchild #3910 failed with exit status 1) Nov 18 23:17:01 claypool postfix/sendmail[3925]: fatal: open /etc/postfix/main.cf: No such file or directory Nov 18 23:17:01 claypool CRON[3908]: (root) MAIL (mailed 1 byte of output; but got status 0x004b, #012) Nov 18 23:39:01 claypool CRON[4200]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm) There are no messages marked after 23:39. When I next tried to use the machine, it would not return from the screensaver (blank screen), nor switch to another terminal, and I had to hard reboot it. [UPDATE] The output of smartctl is here. I had trouble getting this, because / is being mounted read-only (?!), which prevents most applications from running. Also, it may not be related, but I have the following worrying messages in dmesg: [ 10.084596] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 10.098477] i2c i2c-0: nForce2 SMBus adapter at 0x600 [ 10.098483] ACPI: resource nForce2_smbus [io 0x0700-0x073f] conflicts with ACPI region SM00 [??? 0x00000700-0x0000073f flags 0x30] [ 10.098486] ACPI: This conflict may cause random problems and system instability [ 10.098487] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.098509] i2c i2c-1: nForce2 SMBus adapter at 0x700 [ 10.112570] Linux agpgart interface v0.103 [ 10.155329] atk: Resources not safely usable due to acpi_enforce_resources kernel parameter [ 10.161506] it87: Found IT8712F chip at 0x290, revision 8 [ 10.161517] it87: VID is disabled (pins used for GPIO) [ 10.161527] it87: in3 is VCC (+5V) [ 10.161528] it87: in7 is VCCH (+5V Stand-By) [ 10.161560] ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI region ECRE [??? 0x00000290-0x000002af flags 0x45] [ 10.161562] ACPI: This conflict may cause random problems and system instability [ 10.161564] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [UPDATE 2] I swapped in a new SATA cable, per Phil's suggestion. The current output of smartctl is here, if it helps. [UPDATE 3] I don't think the cable fixed it. The system hasn't locked up yet, but my media player crashed a few minutes ago and I have the following in the syslog: Nov 20 16:07:17 claypool kernel: [ 2294.400033] ata1: link is slow to respond, please be patient (ready=0) Nov 20 16:07:47 claypool kernel: [ 2324.084581] ata1: COMRESET failed (errno=-16) Nov 20 16:07:47 claypool kernel: [ 2324.084588] ata1: limiting SATA link speed to 1.5 Gbps Nov 20 16:07:47 claypool kernel: [ 2324.084592] ata1: hard resetting link I get the following response from smartctl: $ sudo smartctl -a /dev/sda [sudo] password for chris: sudo: Can't open /var/lib/sudo/chris/0: Read-only file system smartctl 5.40 2010-03-16 r3077 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Device: /0:0:0:0 Version: scsiModePageOffset: response length too short, resp_len=47 offset=50 bd_len=46 >> Terminate command early due to bad response to IEC mode page A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

  Read the article

• ASP.NET List Control

  - by Ricardo Peres

  Today I developed a simple control for generating lists in ASP.NET, something that the base class library does not contain; it allows for nested lists where the list item types and images can be configured on a list by list basis. Since it was a great fun to develop, I'd like to share it here. Here is the code: [ParseChildren(true)] [PersistChildren(false)] public class List: WebControl { public List(): base("ul") { this.Items = new List(); this.ListStyleType = ListStyleType.Auto; this.ListStyleImageUrl = String.Empty; this.CommonCssClass = String.Empty; this.ContainerCssClass = String.Empty; } [DefaultValue(ListStyleType.Auto)] public ListStyleType ListStyleType { get; set; } [DefaultValue("")] [UrlProperty("*.png;*.gif;*.jpg")] public String ListStyleImageUrl { get; set; } [DefaultValue("")] [CssClassProperty] public String CommonCssClass { get; set; } [DefaultValue("")] [CssClassProperty] public String ContainerCssClass { get; set; } [Browsable(false)] [PersistenceModeAttribute(PersistenceMode.InnerProperty)] public List Items { private set; get; } protected override void Render(HtmlTextWriter writer) { String cssClass = String.Join(" ", new String [] { this.CssClass, this.ContainerCssClass }); if (cssClass.Trim().Length != 0) { this.CssClass = cssClass; } if (String.IsNullOrEmpty(this.ListStyleImageUrl) == false) { this.Style[ HtmlTextWriterStyle.ListStyleImage ] = String.Format("url('{0}')", this.ResolveClientUrl(this.ListStyleImageUrl)); } if (this.ListStyleType != ListStyleType.Auto) { switch (this.ListStyleType) { case ListStyleType.Circle: case ListStyleType.Decimal: case ListStyleType.Disc: case ListStyleType.None: case ListStyleType.Square: this.Style [ HtmlTextWriterStyle.ListStyleType ] = this.ListStyleType.ToString().ToLower(); break; case ListStyleType.LowerAlpha: this.Style [ HtmlTextWriterStyle.ListStyleType ] = "lower-alpha"; break; case ListStyleType.LowerRoman: this.Style [ HtmlTextWriterStyle.ListStyleType ] = "lower-roman"; break; case ListStyleType.UpperAlpha: this.Style [ HtmlTextWriterStyle.ListStyleType ] = "upper-alpha"; break; case ListStyleType.UpperRoman: this.Style [ HtmlTextWriterStyle.ListStyleType ] = "upper-roman"; break; } } base.Render(writer); } protected override void RenderChildren(HtmlTextWriter writer) { foreach (ListItem item in this.Items) { this.writeItem(item, this, 0); } base.RenderChildren(writer); } private void writeItem(ListItem item, Control control, Int32 depth) { HtmlGenericControl li = new HtmlGenericControl("li"); control.Controls.Add(li); if (String.IsNullOrEmpty(this.CommonCssClass) == false) { String cssClass = String.Join(" ", new String [] { this.CommonCssClass, this.CommonCssClass + depth }); li.Attributes [ "class" ] = cssClass; } foreach (String key in item.Attributes.Keys) { li.Attributes[key] = item.Attributes [ key ]; } li.InnerText = item.Text; if (item.ChildItems.Count != 0) { HtmlGenericControl ul = new HtmlGenericControl("ul"); li.Controls.Add(ul); if (String.IsNullOrEmpty(this.ContainerCssClass) == false) { ul.Attributes["class"] = this.ContainerCssClass; } if ((item.ListStyleType != ListStyleType.Auto) || (String.IsNullOrEmpty(item.ListStyleImageUrl) == false)) { if (String.IsNullOrEmpty(item.ListStyleImageUrl) == false) { ul.Style[HtmlTextWriterStyle.ListStyleImage] = String.Format("url('{0}');", this.ResolveClientUrl(item.ListStyleImageUrl)); } if (item.ListStyleType != ListStyleType.Auto) { switch (this.ListStyleType) { case ListStyleType.Circle: case ListStyleType.Decimal: case ListStyleType.Disc: case ListStyleType.None: case ListStyleType.Square: ul.Style[ HtmlTextWriterStyle.ListStyleType ] = item.ListStyleType.ToString().ToLower(); break; case ListStyleType.LowerAlpha: ul.Style [ HtmlTextWriterStyle.ListStyleType ] = "lower-alpha"; break; case ListStyleType.LowerRoman: ul.Style [ HtmlTextWriterStyle.ListStyleType ] = "lower-roman"; break; case ListStyleType.UpperAlpha: ul.Style [ HtmlTextWriterStyle.ListStyleType ] = "upper-alpha"; break; case ListStyleType.UpperRoman: ul.Style [ HtmlTextWriterStyle.ListStyleType ] = "upper-roman"; break; } } } foreach (ListItem childItem in item.ChildItems) { this.writeItem(childItem, ul, depth + 1); } } } } [Serializable] [ParseChildren(true, "ChildItems")] public class ListItem: IAttributeAccessor { public ListItem() { this.ChildItems = new List(); this.Attributes = new Dictionary(); this.Text = String.Empty; this.Value = String.Empty; this.ListStyleType = ListStyleType.Auto; this.ListStyleImageUrl = String.Empty; } [DefaultValue(ListStyleType.Auto)] public ListStyleType ListStyleType { get; set; } [DefaultValue("")] [UrlProperty("*.png;*.gif;*.jpg")] public String ListStyleImageUrl { get; set; } [DefaultValue("")] public String Text { get; set; } [DefaultValue("")] public String Value { get; set; } [Browsable(false)] public List ChildItems { get; private set; } [Browsable(false)] public Dictionary Attributes { get; private set; } String IAttributeAccessor.GetAttribute(String key) { return (this.Attributes [ key ]); } void IAttributeAccessor.SetAttribute(String key, String value) { this.Attributes [ key ] = value; } } [Serializable] public enum ListStyleType { Auto = 0, Disc, Circle, Square, Decimal, LowerRoman, UpperRoman, LowerAlpha, UpperAlpha, None } SyntaxHighlighter.config.clipboardSwf = 'http://alexgorbatchev.com/pub/sh/2.0.320/scripts/clipboard.swf'; SyntaxHighlighter.brushes.CSharp.aliases = ['c#', 'c-sharp', 'csharp']; SyntaxHighlighter.all();

  Read the article

• jQuery Datatable in MVC &hellip; extended.

  - by Steve Clements

  There are a million plugins for jQuery and when a web forms developer like myself works in MVC making use of them is par-for-the-course!  MVC is the way now, web forms are but a memory!! Grids / tables are my focus at the moment.  I don’t want to get in to righting reems of css and html, but it’s not acceptable to simply dump a table on the screen, functionality like sorting, paging, fixed header and perhaps filtering are expected behaviour.  What isn’t always required though is the massive functionality like editing etc you get with many grid plugins out there. You potentially spend a long time getting everything hooked together when you just don’t need it. That is where the jQuery DataTable plugin comes in.  It doesn’t have editing “out of the box” (you can add other plugins as you require to achieve such functionality). What it does though is very nicely format a table (and integrate with jQuery UI) without needing to hook up and Async actions etc.  Take a look here… http://www.datatables.net I did in the first instance start looking at the Telerik MVC grid control – I’m a fan of Telerik controls and if you are developing an in-house of open source app you get the MVC stuff for free…nice!  Their grid however is far more than I require.  Note: Using Telerik MVC controls with your own jQuery and jQuery UI does come with some hurdles, mainly to do with the order in which all your jQuery is executing – I won’t cover that here though – mainly because I don’t have a clear answer on the best way to solve it! One nice thing about the dataTable above is how easy it is to extend http://www.datatables.net/examples/plug-ins/plugin_api.html and there are some nifty examples on the site already… I however have a requirement that wasn’t on the site … I need a grid at the bottom of the page that will size automatically to the bottom of the page and be scrollable if required within its own space i.e. everything above the grid didn’t scroll as well.  Now a CSS master may have a great solution to this … I’m not that master and so didn’t! The content above the grid can vary so any kind of fixed positioning is out. So I wrote a little extension for the DataTable, hooked that up to the document.ready event and window.resize event. Initialising my dataTable ( s )… $(document).ready(function () {   var dTable = $(".tdata").dataTable({ "bPaginate": false, "bLengthChange": false, "bFilter": true, "bSort": true, "bInfo": false, "bAutoWidth": true, "sScrollY": "400px" });   My extension to the API to give me the resizing….   // ********************************************************************** // jQuery dataTable API extension to resize grid and adjust column sizes // $.fn.dataTableExt.oApi.fnSetHeightToBottom = function (oSettings) { var id = oSettings.nTable.id; var dt = $("#" + id); var top = dt.position().top; var winHeight = $(document).height(); var remain = (winHeight - top) - 83; dt.parent().attr("style", "overflow-x: auto; overflow-y: auto; height: " + remain + "px;"); this.fnAdjustColumnSizing(); } This is very much is debug mode, so pretty verbose at the moment – I’ll tidy that up later! You can see the last call is a call to an existing method, as the columns are fixed and that normally involves so CSS voodoo, a call to adjust those sizes is required. Just above is the style that the dataTable gives the grid wrapper div, I got that from some firebug action and stick in my new height. The –83 is to give me the space at the bottom i require for fixed footer!   Finally I hook that up to the load and window resize.  I’m actually using jQuery UI tabs as well, so I’ve got that in the open event of the tabs.   $(document).ready(function () { var oTable; $("#tabs").tabs({ "show": function (event, ui) { oTable = $('div.dataTables_scrollBody>table.tdata', ui.panel).dataTable(); if (oTable.length > 0) { oTable.fnSetHeightToBottom(); } } }); $(window).bind("resize", function () { oTable.fnSetHeightToBottom(); }); }); And that all there is too it.  Testament to the wonders of jQuery and the immense community surrounding it – to which I am extremely grateful. I’ve also hooked up some custom column filtering on the grid – pretty normal stuff though – you can get what you need for that from their website.  I do hide the out of the box filter input as I wanted column specific, you need filtering turned on when initialising to get it to work and that input come with it!  Tip: fnFilter is the method you want.  With column index as a param – I used data tags to simply that one.

  Read the article

• How to propagate http response code from back-end to client

  - by Manoj Neelapu

  Oracle service bus can be used as for pass through casses. Some use cases require propagating the http-response code back to the caller. http://forums.oracle.com/forums/thread.jspa?messageID=4326052&#4326052 is one such example we will try to accomplish in this tutorial.We will try to demonstrate this feature using Oracle Service Bus (11.1.1.3.0. We will also use commons-logging-1.1.1, httpcomponents-client-4.0.1, httpcomponents-core-4.0.1 for writing the client to demonstrate.First we create a simple JSP which will always set response code to 304.The JSP snippet will look like <%@ page language="java"     contentType="text/xml;     charset=UTF-8"        pageEncoding="UTF-8" %><%      System.out.println("Servlet setting Responsecode=304");    response.setStatus(304);    response.flushBuffer();%>We will now deploy this JSP on weblogic server with URI=http://localhost:7021/reponsecode/For this JSP we will create a simple Any XML BS We will also create proxy service as shown below Once the proxy is created we configure pipeline for the proxy to use route node, which invokes the BS(JSPCaller) created in the first place. So now we will create a error handler for route node and will add a stage. When a HTTP BS sends a request, the JSP sends the response back. If the response code is not 200, then the http BS will consider that as error and the above configured error handler is invoked. We will print $outbound to show the response code sent by the JSP. The next actions. To test this I had create a simple clientimport org.apache.http.Header;import org.apache.http.HttpEntity;import org.apache.http.HttpHost;import org.apache.http.HttpResponse;import org.apache.http.HttpVersion;import org.apache.http.client.methods.HttpGet;import org.apache.http.conn.ClientConnectionManager;import org.apache.http.conn.scheme.PlainSocketFactory;import org.apache.http.conn.scheme.Scheme;import org.apache.http.conn.scheme.SchemeRegistry;import org.apache.http.impl.client.DefaultHttpClient;import org.apache.http.impl.conn.tsccm.ThreadSafeClientConnManager;import org.apache.http.params.BasicHttpParams;import org.apache.http.params.HttpParams;import org.apache.http.params.HttpProtocolParams;import org.apache.http.util.EntityUtils;/** * @author MNEELAPU * */public class TestProxy304{    public static void main(String arg[]) throws Exception{     HttpHost target = new HttpHost("localhost", 7021, "http");     // general setup     SchemeRegistry supportedSchemes = new SchemeRegistry();     // Register the "http" protocol scheme, it is required     // by the default operator to look up socket factories.     supportedSchemes.register(new Scheme("http",              PlainSocketFactory.getSocketFactory(), 7021));     // prepare parameters     HttpParams params = new BasicHttpParams();     HttpProtocolParams.setVersion(params, HttpVersion.HTTP_1_1);     HttpProtocolParams.setContentCharset(params, "UTF-8");     HttpProtocolParams.setUseExpectContinue(params, true);     ClientConnectionManager connMgr = new ThreadSafeClientConnManager(params,              supportedSchemes);     DefaultHttpClient httpclient = new DefaultHttpClient(connMgr, params);     HttpGet req = new HttpGet("/HttpResponseCode/ProxyExposed");     System.out.println("executing request to " + target);     HttpResponse rsp = httpclient.execute(target, req);     HttpEntity entity = rsp.getEntity();     System.out.println("----------------------------------------");     System.out.println(rsp.getStatusLine());     Header[] headers = rsp.getAllHeaders();     for (int i = 0; i < headers.length; i++) {         System.out.println(headers[i]);     }     System.out.println("----------------------------------------");     if (entity != null) {         System.out.println(EntityUtils.toString(entity));     }     // When HttpClient instance is no longer needed,      // shut down the connection manager to ensure     // immediate deallocation of all system resources     httpclient.getConnectionManager().shutdown();     }}On compiling and executing this we see the below output in STDOUT which clearly indicates the response code was propagated from Business Service to Proxy serviceexecuting request to http://localhost:7021----------------------------------------HTTP/1.1 304 Not ModifiedDate: Tue, 08 Jun 2010 16:13:42 GMTContent-Type: text/xml; charset=UTF-8X-Powered-By: Servlet/2.5 JSP/2.1----------------------------------------  

  Read the article

• Sublime text 2 syntax highlighter?

  - by BigSack

  I have coded my first custom syntax highlighter for sublime text 2, but i don't know how to install it. It is based on notepad++ highlighter found here https://70995658-a-62cb3a1a-s-sites.googlegroups.com/site/lohanplus/files/smali_npp.xml?attachauth=ANoY7criVTO9bDmIGrXwhZLQ_oagJzKKJTlbNDGRzMDVpFkO5i0N6hk_rWptvoQC1tBlNqcqFDD5NutD_2vHZx1J7hcRLyg1jruSjebHIeKdS9x0JCNrsRivgs6DWNhDSXSohkP1ZApXw0iQ0MgqcXjdp7CkJJ6pY_k5Orny9TfK8UWn_HKFsmPcpp967NMPtUnd--ad-BImtkEi-fox2tjs7zc5LabkDQ%3D%3D&attredirects=0&d=1 <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>fileTypes</key> <array> <string>smali</string> </array> <dict> <key>Word1</key> <string>add-double add-double/2addr add-float add-float/2addr add-int add-int/2addr add-int/lit16 add-int/lit8 add-long add-long/2addr aget aget-boolean aget-byte aget-char aget-object aget-short aget-wide and-int and-int/2addr and-int/lit16 and-int/lit8 and-long and-long/2addr aput aput-boolean aput-byte aput-char aput-object aput-short aput-wide array-length check-cast cmp-long cmpg-double cmpg-float cmpl-double cmpl-float const const-class const-string const-string-jumbo const-wide const-wide/16 const-wide/32 const-wide/high16 const/16 const/4 const/high16 div-double div-double/2addr div-float div-float/2addr div-int div-int/2addr div-int/lit16 div-int/lit8 div-long div-long/2addr double-to-float double-to-int double-to-long execute-inline fill-array-data filled-new-array filled-new-array/range float-to-double float-to-int float-to-long goto goto/16 goto/32 if-eq if-eqz if-ge if-gez if-gt if-gtz if-le if-lez if-lt if-ltz if-ne if-nez iget iget-boolean iget-byte iget-char iget-object iget-object-quick iget-quick iget-short iget-wide iget-wide-quick instance-of int-to-byte int-to-char int-to-double int-to-float int-to-long int-to-short invoke-direct invoke-direct-empty invoke-direct/range invoke-interface invoke-interface/range invoke-static invoke-static/range invoke-super invoke-super-quick invoke-super-quick/range invoke-super/range invoke-virtual invoke-virtual-quick invoke-virtual-quick/range invoke-virtual/range iput iput-boolean iput-byte iput-char iput-object iput-object-quick iput-quick iput-short iput-wide iput-wide-quick long-to-double long-to-float long-to-int monitor-enter monitor-exit move move-exception move-object move-object/16 move-object/from16 move-result move-result-object move-result-wide move-wide move-wide/16 move-wide/from16 move/16 move/from16 mul-double mul-double/2addr mul-float mul-float/2addr mul-int mul-int/2addr mul-int/lit8 mul-int/lit16 mul-long mul-long/2addr neg-double neg-float neg-int neg-long new-array new-instance nop not-int not-long or-int or-int/2addr or-int/lit16 or-int/lit8 or-long or-long/2addr rem-double rem-double/2addr rem-float rem-float/2addr rem-int rem-int/2addr rem-int/lit16 rem-int/lit8 rem-long rem-long/2addr return return-object return-void return-wide rsub-int rsub-int/lit8 sget sget-boolean sget-byte sget-char sget-object sget-short sget-wide shl-int shl-int/2addr shl-int/lit8 shl-long shl-long/2addr shr-int shr-int/2addr shr-int/lit8 shr-long shr-long/2addr sparse-switch sput sput-boolean sput-byte sput-char sput-object sput-short sput-wide sub-double sub-double/2addr sub-float sub-float/2addr sub-int sub-int/2addr sub-int/lit16 sub-int/lit8 sub-long sub-long/2addr throw throw-verification-error ushr-int ushr-int/2addr ushr-int/lit8 ushr-long ushr-long/2addr xor-int xor-int/2addr xor-int/lit16 xor-int/lit8 xor-long xor-long/2addr</string> </dict> <dict> <key>Word2</key> <string>v0 v1 v2 v3 v4 v5 v6 v7 v8 v9 v10 v11 v12 v13 v14 v15 v16 v17 v18 v19 v20 v21 v22 v23 v24 v25 v26 v27 v28 v29 v30 v31 v32 v33 v34 v35 v36 v37 v38 v39 v40 v41 v42 v43 v44 v45 v46 v47 v48 v49 v50 p0 p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30</string> </dict> <dict> <key>Word3</key> <string>array-data .catch .catchall .class .end .end\ local .enum .epilogue .field .implements .line .local .locals .parameter .prologue .registers .restart .restart\ local .source .subannotation .super</string> </dict> <dict> <key>Word4</key> <string>abstract bridge constructor declared-synchronized enum final interface native private protected public static strictfp synchronized synthetic system transient varargs volatile</string> </dict> <dict> <key>Word4</key> <string>(&quot;0)&quot;0</string> </dict> <dict> <key>Word5</key> <string>.method .annotation .sparse-switch .packed-switch</string> </dict> <dict> <key>word6</key> <string>.end\ method .end\ annotation .end\ sparse-switch .end\ packed-switch</string> </dict> <dict> <key>word7</key> <string>&quot; ( ) , ; { } &gt;</string> </dict> <key>uuid</key> <string>27798CC6-6B1D-11D9-B8FA-000D93589AF6</string> </dict> </plist>

  Read the article

< Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319  | Next Page >