Search Results

Search found 9715 results on 389 pages for 'servers'.

Page 312/389 | < Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319  | Next Page >

• sql 2008 disk layout on a budget this is for database mirroring

  - by user22215

  Guys I'm rolling out a SQL database server that will be used to back Sharepoint 2007. Right now I need some advice on my disk layout. I have two Dell servers that are configured a little differently in terms of storage. The principle server will be using a combination of local storage and san storage. I have to work with what I have the organization is currently all allocated on san storage it was like pulling teeth to even get what I have to work with now. My disk setup on the principle is as follows: raid 1 for OS raid 10 for logs raid 10 fiber on san for high IO databases raid 10 sata on san for content databases My question in regards to the principle server is where should I place the temp db? I thought about placing it on the fiber raid 10 which will be hosting my high IO Sharepoint SSP databases my only other choice is to move it to the raid 1 os partition which I’m sure you guys will be against. Now let’s talk about the mirror server it is not connected to the san it is all local 6 15k SAS drives. Now my question is the same do I put tempdb on the os partition or do I leave the os partition and use a single raid 10 for everything? Any help you can provide is much appreciated.

  Read the article

• Has anyone used tools like (Chef, Salt, Puppet, CfEngine) to configure a 2008 Win Server with Sql?

  - by Development 4.0

  I have been looking into tools to automate the creation of servers. For two different reasons: Production Development machines I love the idea of the immutable server. I have seen the tools demoed and used successfully on *nix boxes running Rails or Lamp etc. Has anyone found a good way to do this in the Microsoft stack? I would like to get in on the fun and create scripts that will install Windows, patch it according to specification, deploy Sql Server create scripts to build out a database and just for fun deploy SharePoint and configure it, and then deploy a SharePoint solution to it. I can get part of the way, install Windows manually, install Sql Server manually, use Powershell to do all the configuration and setup. Install SharePoint and configure part of it, then powershell for the rest of the configuration and deploying a solution. I would love to have the ability to run one script though, or at least one unified process. I can, and have mostly used VM template images and then instantiated them, but the creation of the template is usually a manual step.

  Read the article

• Setup Entourage for Exchange via HTTP communication

  - by Johandk

  Our ISP set up a hosted exchange server for all our mail. I've setup all our Outlook users with no problems. We have two people using Mac OSX Leopard and Entourage. Entourage has the option of adding an Exchange account, but I have no idea how to tell it to connect to exchange via HTTP. Heres an excerpt from the client setup docs the hosting company sent me for Outlook: 1 .Go to control panel 2. Select ‘Mail’ 3. Select ‘Email accounts’ Under the E-mail tab select ‘New’ Select ‘Manually configure server settings......’ - click next Select ‘Microsoft Exchange’ – click next Complete details as below with Microsoft Exchange Server as: [server address] Do not select ‘Check Name’. Instead select ‘More Settings’. Go to the Connection tab, and select the bottom option ‘Connect to Microsoft Exchange using HTTP’. And then select the ‘Exchange Proxy Settings’ button. Enter Proxy server for Exchange Check Only connect to proxy servers that have this principal name in their certificate, Enter msstd:[servername] Proxy Authentication - select Basic Authentication Select OK, and again, so that you return to the main screen. Now select ‘Check Name’. Enter Username and Password: The username should now be the full name and underlined. If so select next, and then finish. Next time you open Outlook, enter username and password Any help GREATLY appreciated.

  Read the article

• APC Smart UPS network shutdown issue

  - by Rob Clarke

  Here is a bit about our setup: We have 2x Smart-UPS RT 6000 XL units with network management cards We are running Powerchute from a network server Powerchute is connected to the management cards of both UPSs UPSs are set to do a graceful shutdown via Powerchute when the battery duration is under 20 minutes We also have a command file that runs with Powerchute Although our setup is redundant we do not have an equal load on each server due to APC switches for single power devices The problem is that as we do not have an equal load on each server the batteries drain at different rates. This means that the UPSs both get to the specified low battery duration at completely different times. The problem here is that UPS 1 may have run down to 5 minutes and is in desperate need of initiating a Powerchute shutdown - UPS 2 still has 25 minutes of runtime so no shutdown is initiated. Consequently UPS 1 goes down and takes all the servers with and then shuts down UPS 2 as well! What we need to happen are 1 of either 2 things: Powerchute initiates the shutdown as soon as either UPS reaches the 20 minutes low battery duration setting - and doesnt wait for both The UPS with the heavier load expends its entire battery but does not shutdown both UPSs and lets the load be switched across to the UPS that still has runtime remaining. That way when the UPS that still has runtime reaches its low battery duration it can proceed with the graceful shutdown via Powerchute. Hope that makes sense, any help is greatly appreciated!

  Read the article

• Connection timeout when trying to SSH

  - by dan

  The other day I tried to connect to my remote server via SSH as i always have. But now when I try to connect it just times out after about 60 seconds. I run service ssh start Which tells me that Job is already running: ssh. I then ran $netstat -tnlp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:993 0.0.0.0:* LISTEN 1972/dovecot tcp 0 0 0.0.0.0:995 0.0.0.0:* LISTEN 1972/dovecot tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 2030/mysqld tcp 0 0 0.0.0.0:110 0.0.0.0:* LISTEN 1972/dovecot tcp 0 0 0.0.0.0:143 0.0.0.0:* LISTEN 1972/dovecot tcp 0 0 0.0.0.0:10000 0.0.0.0:* LISTEN 2157/perl tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 3028/sshd tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN 2273/master tcp6 0 0 :::80 :::* LISTEN 2618/apache2 tcp6 0 0 :::21 :::* LISTEN 2291/proftpd: (acce tcp6 0 0 :::22 :::* LISTEN 3028/sshd I am able to access subdomains on my site, and FTP, but don't have the ability to SSH or even ping remotely. Any thoughts?

  Read the article

• AuthBasicProvider: failover not working when the first LDAP is down?

  - by quanta

  I've been trying to setup redundant LDAP servers with Apache 2.2.3. /etc/httpd/conf.d/authn_alias.conf <AuthnProviderAlias ldap master> AuthLDAPURL ldap://192.168.5.148:389/dc=domain,dc=vn?cn AuthLDAPBindDN cn=anonymous,ou=it,dc=domain,dc=vn AuthLDAPBindPassword pa$$w0rd </AuthnProviderAlias> <AuthnProviderAlias ldap slave> AuthLDAPURL ldap://192.168.5.199:389/dc=domain,dc=vn?cn AuthLDAPBindDN cn=anonymous,ou=it,dc=domain,dc=vn AuthLDAPBindPassword pa$$w0rd </AuthnProviderAlias> /etc/httpd/conf.d/authz_ldap.conf # # mod_authz_ldap can be used to implement access control and # authenticate users against an LDAP database. # LoadModule authz_ldap_module modules/mod_authz_ldap.so <IfModule mod_authz_ldap.c> <Location /> AuthBasicProvider master slave AuthzLDAPAuthoritative Off AuthType Basic AuthName "Authorization required" AuthzLDAPMemberKey member AuthUserFile /home/setup/svn/auth-conf AuthzLDAPSetGroupAuth user require valid-user AuthzLDAPLogLevel error </Location> </IfModule> If I understand correctly, mod_authz_ldap will try to search users in the second LDAP if the first server is down or OpenLDAP on it is not running. But in practice, it does not happen. Tested by stopping LDAP on the master, I get the "500 Internal Server Error" when accessing to the Subversion repository. The error_log shows: [11061] auth_ldap authenticate: user quanta authentication failed; URI / [LDAP: ldap_simple_bind_s() failed][Can't contact LDAP server] Did I misunderstand?

  Read the article

• Using "route add" to tell my computer to use a direct ethernet connexion instead of wifi ?

  - by TheSamFrom1984

  2 PCs are involved. Both are connected to the internet via Wifi on the same router. I can ping to/from each other and share folders flawlessly, but I'd like to be able to set a direct Ethernet link between them to speed up file transfers AND keep the Wifi connections (no gateway). So I plugged my RJ45 cable, and set up the connection. It works, but the PCs are only using this connection if one of them if disconnected from the Wifi. PC1 local address is 192.168.0.7 on its ethernet interface, and 192.168.1.21 on the wifi one. PC2 local address is 192.168.0.6 on its ethernet interface, and 192.168.1.22 on the wifi one. My question is : I'd like to using the route add command to tell PC1 to use the Ethernet interface when it needs to connect with PC2, by specifying "IF 2" at the end of the route add command. How can I do this ? I don't know what to put in the "gateway" parameter of the command, and everything I tried returns "the parameter is incorrect" (i don't know which one). ipconfig /all on PC1 : Windows IP Configuration Host Name . . . . . . . . . . . . : Sam-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : NETGEAR WG111v3 54Mbps Wireless USB 2.0 Adapter Physical Address. . . . . . . . . : 00-22-3F-DA-51-56 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::1d33:60b:476c:d396%12(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.1.21(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : vendredi 27 novembre 2009 15:38:48 Lease Expires . . . . . . . . . . : dimanche 29 novembre 2009 07:33:04 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DHCPv6 IAID . . . . . . . . . . . : 301998655 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-7E-58-EA-00-1A-4D-59-B2-71 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 00-1A-4D-59-B2-71 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::f598:c3a0:df8d:706e%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 234887757 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-7E-58-EA-00-1A-4D-59-B2-71 DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled

  Read the article

• DNS something is wrong?

  - by Nickolas R.

  Hello I am configuring bind9 on a server with two network interfaces, one is connected to the LAN and the other is connected to the Internet through NAT so bind is not faced directly to the Internet. Everything seems to work fine, clients can do both forward and reverse lookups but somethings seems strange. On the server if i try to ping www.google.com one time, a great amount of network activity is genereated, alot more that one would expect so i decided to sniff the traffic with tcpdump. When loading the dump into Wireshark i can see about 250 entries with "Standard query A" and "Standard query response" Here a some of the entries from the dump DNS Standard query A www.google.com DNS Standard query A blackhole-1.iana.org DNS Standard query A blackhole-2.iana.org DNS Standard query response DNS Standard query A ns2.isc-sns.com DNS Standard query A ns1.isc-sns.net DNS Standard query A ns3.isc-sns.info DNS Standard query response PTR b.iana-servers.net RRSIG DNS Standard query A auth2.dns.cogentco.com DNS Standard query A ns1.crsnic.net DNS Standard query A ns2.nsiregistry.net DNS Standard query A ns3.verisign-grs.net DNS Standard query A ns4.verisign-grs.net DNS Standard query PTR 79.52.19.199.in-addr.arpa I do not have too much experince with DNS yet, but i am pretty sure that something is wrong. Anybody that have an idea of whats is going on?

  Read the article

• apache name virtual host - two domains and SSL

  - by Tom

  I'm trying to setup Apache(2.2.3) to run two websites with SSL using both different domains and IP addresses. Both websites run fine on port 80 but when I tried to enable SSL for website2 I get a ssl_error_bad_cert_domain error; website2 picks up the SSL cert for website1. Here is my setup in httpd.conf: # Website1 NameVirtualHost 192.168.10.1:80 <VirtualHost 192.168.10.1:80> DocumentRoot /var/www/html ServerName www.website1.org </VirtualHost> NameVirtualHost 192.168.10.1:443 <VirtualHost 192.168.10.1:443> SSLEngine On SSLCertificateFile conf/ssl/website1.cer SSLCertificateKeyFile conf/ssl/website1.key </VirtualHost> # Website2 NameVirtualHost 192.168.10.2:80 <VirtualHost 192.168.10.2:80> DocumentRoot /var/www/html/chart ServerName www.website2.org </VirtualHost> NameVirtualHost 192.168.10.2:443 <VirtualHost 192.168.10.2:443> SSLEngine On SSLCertificateFile conf/ssl/website2.cer SSLCertificateKeyFile conf/ssl/website2.key </VirtualHost> Update: In answer to Shane (this wouldn't fit in comment box) here is the output from apachectl -S: VirtualHost configuration: 192.168.10.2:80 is a NameVirtualHost default server www.website2.org (/etc/httpd/conf/httpd.conf:1033) port 80 namevhost www.website2.org (/etc/httpd/conf/httpd.conf:1033) 192.168.10.2:443 is a NameVirtualHost default server bogus_host_without_reverse_dns (/etc/httpd/conf/httpd.conf:1040) port 443 namevhost bogus_host_without_reverse_dns (/etc/httpd/conf/httpd.conf:1040) 192.168.10.1:80 is a NameVirtualHost default server www.website1.org (/etc/httpd/conf/httpd.conf:1017) port 80 namevhost www.website1.org (/etc/httpd/conf/httpd.conf:1017) 192.168.10.1:443 is a NameVirtualHost default server bogus_host_without_reverse_dns (/etc/httpd/conf/httpd.conf:1024) port 443 namevhost bogus_host_without_reverse_dns (/etc/httpd/conf/httpd.conf:1024) wildcard NameVirtualHosts and _default_ servers: _default_:443 192.168.10.1 (/etc/httpd/conf.d/ssl.conf:81) Syntax OK

  Read the article

• How to configure VirtualBox server for performance at home

  - by BluJai

  I currently have two physical Ubuntu Server 10.10 servers at home: one serves as our firewall/router/DHCP/VPN server and the other performs double-duty as a file server and a VirtualBox host for an Ubuntu Desktop 10.10 machine which I use from remote connections (via NoMachine) for many thin-client purposes which are irrelevant to my question. What I'd like to accomplish is to consolidate the two physical machines into one which is a dedicated VirtualBox host (most likely running Ubuntu Server 10.10). Note that I'd like to stick with VirtualBox (if possible) because I'm most comfortable with it and use it on a daily basis at both home and work. Specifically, I plan to have one VM set up as file server, another as the firewall/router/DHCP/VPN (or possibly split those a bit) and a third, which is the only current VM (already VirtualBox), which is the thin-client host. My question comes down to performance and/or recommendations about the file server VM. The file server hosts about 6 terabytes of data across 4 drives. What I'd like to do is use raw disk access from the VM directly to the existing disks. However, I'm curious what performance advantage/disadvantage that would have as compared to using shared folders from the VM host and basically just have the whole drive served as a shared folder to the VM which would then serve it to the other machines on the network. I don't know if virtual disks would even work in this scenario and I certainly wouldn't want a drive to be filled with just a single file which is 1.5 TB (disk image). To add understanding of context, but not to get additional advice, I want to virtualize these machines because I intend to regularly use the snapshot capabilities of VirtualBox for the system disks (which will be virtual drives) of the VMs and I have some physical space/power needs to address (as I mentioned, this is at home).

  Read the article

• Explorer.exe not starting after login on Windows Server 2003 (Terminal Services and console)

  - by Pepperoni Icecream

  When users login to a Windows Server 2003 R2 running Terminal Services they have a blank desktop. Upon inspection, explorer.exe is not running. When I login as administrator, using either RDP or to the console, I am having the same issue. I can pull up the taskman and start explorer.exe manually. I have another Terminal Server setup exactly the same way (same apps, settings, GPO, etc . . .) the only difference is we deployed Symantec Endpoint Client 11.0.5 on Friday. For some reason the working Terminal Server is still on 11.0.4, but the suspect server received the 11.0.5 client upgrade. I checked the eventviewer for any relevant explorer.exe entries to no avail. It seems that if SEP is preventing explorer.exe from starting at login it would do the same for the domain admin starting explorer.exe from the taskman. I disabled the SEP client and services on the server and issued smc -stop and tried logging in again. Still no explorer.exe. So I'm not sure if the client upgrade is relevant but it is worth mentioning since that was the last system change. The 2 servers are members of a NLB group. I took the bad terminal server out of the group until the issue is resolved. Actually stopped the host using NLB manager Any help is appreciated.

  Read the article

• OpenVPN connected but not internet access on the client

  - by Stefan

  I've setup OpenVPN following this tutorial, and everything works fine except that I don't have an internet connection on the client while connected to VPN. http://www.howtoforge.com/internet-and-lan-over-vpn-using-openvpn-linux-server-windows-linux-clients-works-for-gaming-and-through-firewalls My VPS server config is as follows (Ubuntu): dev tun proto udp port 1194 ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/server.crt key /etc/openvpn/easy-rsa/keys/server.key dh /etc/openvpn/easy-rsa/keys/dh1024.pem user nobody group nogroup server 10.8.0.0 255.255.255.0 persist-key persist-tun status /var/log/openvpn-status.log verb 3 client-to-client push "redirect-gateway local def1" #set the dns servers push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" log-append /var/log/openvpn comp-lzo plugin /usr/lib/openvpn/openvpn-auth-pam.so common-auth My client config is as follows (Windows 7): dev tun client proto udp remote XXX.XXX.XXX.XXX 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert stefan.crt key stefan.key comp-lzo verb 3 auth-user-pass redirect-gateway local def1 I've turned off the firewall on the server for testing purposes (it doesn't help), and tried both wired and wireless connecting on the client. I've tried many Google results... but nothing seems to help. Can you help me? Thanks so far...

  Read the article

• Postfix relay gives error 450 while it should be 550

  - by dieter-be

  Hi, we use postfix to do relaying. We get several messages like the following in /var/log/mail (slightly edited) Apr 13 13:30:29 linserver postfix/smtpd[1064]: NOQUEUE: reject: RCPT from unknown[$ip]: 450 4.1.1 <[email protected]>: Recipient address rejected: undeliverable address: host domain.be [$ip] said: 550 <[email protected]>: Recipient address rejected: User unknown in virtual mailbox table (in reply to RCPT TO command); from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<BLUESTREAK.domain.local> Now, when the master mail servers gives a 550, claiming that the user does not exist, I want the relay to also give a 550 back. What happens now is that it seems to return a 450, causing clients to keep messages queued, keep trying and only notify users after a certain period has passed. According to what I could find, the soft_bounce could cause this. But we have not enabled this option (and by default it's off according to postfix docs) It might also have something to do with the *_reject_code postconf values. Especially since the log message complains the unknown ip. But as you can see in the postconf output below, smtpd_sender_restrictions and smtpd_client_restrictions are empty. So even if it would try to do any restrictions there, 550 is the "worst" error going on, so that's what I expect to be returned to the client. postconf: http://sprunge.us/JYgB Thanks, Dieter

  Read the article

• Windows Share authentication from Active Directory Linux login

  - by Kenny

  I'm using Active Directory to log into RHEL. To do this, I followed the steps outlined here: http://www.markwilson.co.uk/blog/2007/05/using-active-directory-to-authenticate-users-on-a-linux-computer.htm I'd like to be able to read data from Windows Servers shared folders without being prompted for a password. On Windows I log into an AD domain, and when I access windows file shares on a server on the LAN (also part of the AD domain) my I can just access them with no authentication step. I've used SMBclient on Linux to access these shares, but it asks for my password. I would like to be able to script access to the data on the shares, but I can't if there's a password prompt in the way. Well, I could, but it's not how I want to do it. Now, since I'm logged in using my active directory username & password, can't I just access the shares without jumping that extra hoop? I know I can mount the share using something like: //192.168.0.5/share /mnt/windows cifs auto,username=steve,password=secret,rw 0 0 but access will depend who is logged in... each user logging in should have their own unique AD access privelages. Thanks for reading!

  Read the article

• Windows 2008 R2 AWS CloudFormation Elastic beanstalk configuration

  - by Webmonger

  I'm looking for some configuration advice. I have a need for a load balanced windows environment with shared media across all instances that are hosting the app. The best explanation i can give is that there will be multiple Windows 2008 server with IIS hosting the app going through an ELB to load balance. Users must be able to upload content (images, video etc...) to the site that will be hosted. When a user uploads media it needs to be kept on a shared location so all windows IIS instances can access the files, I can't host the files on S3 because of the app architecture so they need to be in a place where all IIS server will have access. In addition I need to run an update each IIS server instance that updates a local memory cache when SQL data is updated. I was thinking of a configuration like this: [ELB] - [Win 2008 IIS (multiple servers)] - [Win 2008 File & SQL Server(possibly RDS?)] Does this configuration make sense? If not could you provide an idea of how I should configure it. Thanks in advance

  Read the article

• Forward Apache to Django dev server

  - by Alex Jillard

  I'm trying to get apache to forward all requests on port 80 to 127.0.0.1:8000, which is where the django dev server runs. I think I have it forwarding properly, but there must be an issue with 127.0.0.1:8000 not being run by apache? I'm running the django dev server in an ubuntu vmware instance, and I'd other people in the office to see the apps in development without having to promote anything to our actual dev/staging servers. Right now the virtual machine picks up an IP for itself, and when I point a browser to that url with the defualt apache config, I get the default apache page. I've since changed the httpd.conf file to the following to try and get it to forward the requests to the django dev server: ServerName localhost <Proxy *> Order deny,allow Allow from all </Proxy> <VirtualHost *> ServerName localhost ServerAdmin [email protected] ProxyRequests off ProxyPass * http://127.0.0.1:8000 </VirtualHost> All I get are 404s with this, and in error.log I get the following (192.168.1.101 is the IP of my computer 192.168.1.142 is the IP of the virtual machine): [Mon Mar 08 08:42:30 2010] [error] [client 192.168.1.101] File does not exist: /htdocs

  Read the article

• Problems with X11GraphicsDevice on Suse 11

  - by Daniel

  Hi, On servers running Suse 11 I'm experiencing hangups in sun.awt.X11GraphicsDevice.getDoubleBufferVisuals(Native Method) when connecting via Citrix (and setting DISPLAY to localhost:11.0). Running exactly the same code in exactly the same environment, excepth through Exceed (with DISPLAY set to my workstation's IP) it runs like clockwork. The error is not intermittent, it happens every time Reinstalling the OS does not help Can not reproduce it on Suse 10 This is what the main thread stack looks like: [junit] "main" prio=10 tid=0x0000000040112000 nid=0x6acc runnable [0x00002b9f909ae000] [junit] java.lang.Thread.State: RUNNABLE [junit] at sun.awt.X11GraphicsDevice.getDoubleBufferVisuals(Native Method) [junit] at sun.awt.X11GraphicsDevice.makeDefaultConfiguration(X11GraphicsDevice.java:208) [junit] at sun.awt.X11GraphicsDevice.getDefaultConfiguration(X11GraphicsDevice.java:182) [junit] - locked <0x00002b9fed6b8e70 (a java.lang.Object) [junit] at sun.awt.X11.XToolkit.(XToolkit.java:92) [junit] at java.lang.Class.forName0(Native Method) [junit] at java.lang.Class.forName(Class.java:169) [junit] at java.awt.Toolkit$2.run(Toolkit.java:834) [junit] at java.security.AccessController.doPrivileged(Native Method) [junit] at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:826) [junit] - locked <0x00002b9f94b8ada0 (a java.lang.Class for java.awt.Toolkit) [junit] at java.awt.Toolkit.getEventQueue(Toolkit.java:1676) [junit] at java.awt.EventQueue.invokeLater(EventQueue.java:954) [junit] at javax.swing.SwingUtilities.invokeLater(SwingUtilities.java:1264) ... Has anyone experienced something similar? Could this be a problem in Suse 11's display handling? I'm thankful for any input at this point - I'm fresh out of ideas :)

  Read the article

• what web based tool, to allow a non-technical user to manage authorized keys files on a Linux (fedora/centos/ubuntu/debian) server

  - by Tom H

  (Edit: clarification below) We have a number of groups of developers that change frequently, and a security policy to require individual logins to servers using rsa or dsa public keys, which is achieved via the standard method of adding id_dsa.pub to their authorized keys file. I am using chef to sync the user accounts across machines, however our previous method of using webmin to manage the user passwords is not designed for key based auth, and hence is not easy to use for non-technical users. The developers are logging in from the WAN using ssh, they can either provide their own key, or an administrator will send them a private key. The development machines are located in the cloud and we have a single server available to host the master set of accounts. Obviously I could deploy ldap or other centralised authentication system, but that seems a bit over blown when webmin worked well for the simple case. It is easy to achieve synchronised users, groups and passwords across a bunch of low security development boxes using webmin clustered users and groups. However looking at the currently installed webmin it is not so easy to create the authorized keys as it is to create user accounts and passwords. (its possible, but its not easy - some functionality is in the usermin module, or would required some tedious steps) Ideally I'd like a web interface that is pretty much dedicated to creating users and groups, and can generate key pairs on the fly, and can accepted pasted in public keys to add to the users authorized keys file. If the tool sync'ed the users and keys as well, that would be great, but I can use chef to do that part if the accounts are created correctly on the "master" server.

  Read the article

• Linux Scheduler (not using all cores on multi-core machine) RHEL6

  - by User512

  I'm seeing strange behavior on one of my servers (running RHEL 6). There seems to be something wrong with the scheduler. Here's the test program I'm using: #include <stdio.h> #include <unistd.h> #include <stdlib.h> void RunClient(int i) { printf("Starting client %d\n", i); while (true) { } } int main(int argc, char** argv) { for (int i = 0; i < 4; ++i) { pid_t p_id = fork(); if (p_id == -1) { perror("fork"); } else if (p_id == 0) { RunClient(i); exit(0); } } return 0; } This machine has a lot more than 4 cores so we'd expect all processes to be running at 100%. When I check on top, the cpu usage varies. Sometimes it's split (100%, 33%, 33%, 33%), other times it's split (100%, 100%, 50%, 50%). When I try this test on another server of ours (running RHEL 5), there are no issues (it's 100%, 100%, 100%, 100%) as expected. What's causing this and how can I fix it? Thanks

  Read the article

• Name resolution not working with ipv6 on centos

  - by jolivier

  I just installed CentOs 6.3 on a server to be installed in a data center, but cannot get name resolution / curl to work. I know this is because of it trying to use ipv6, since ping google.com works, curl -4 google.com works, but not curl google.com. I removed the ipv6 adress from the interface and it does not change anything. This is very problematic since most system tools like yum fail at name resolution currently. Browsers like Firefox work because they might be using another tool for name resolution than the one use by curl. I managed to fix this on workstations by completely disabling ipv6 following tutorials like this one / hardcoding name resolution in /etc/hosts. But since I am here configuring a server which will be later installed in a remote data center, I would like not to mess up, understand what is going on and fix it properly. Besides, I will face the same issue with more servers to come so I would really appreciate your help in understanding this problem and how to solve it. I would be happy to provide more information if needed to help understand what is going on. The current network configuration is a small enterprise network, with a DNS server (let's call it A) configured once a long time ago. dig google.com and dig -4 google.com are both refused by the A DNS. But this is also true for my workstation on which curl is working (and yes they both use the same A DNS server). Indeed this faulty server and my workstation have multiple nameservers in /etc/resolv.conf, and the second one is working fine for both of them, so if I remove A from my resolv.conf everything works fine! Regards, Olivier

  Read the article

• How can I parse/ transform text log data before it gets captured in SCOM 2007 R2?

  - by Abs

  I'm pretty much a noob with System Center Operations Manager 2007, and I'm probably missing something pretty basic, but I'm stumped anyway. We're setting up monitoring on some of our servers, and we'd like to capture data from some plain text log files (e.g. DNS debug logs, DHCP logs). It looks to me like I can set up a generic text file monitoring rule and get events captured into the main Ops Manager database, but my understanding is that the whole line of text from the plain text log gets captured as one field. In an ideal world, we'd be able to parse or transform that log file data to make it easier to query later. Is this possible? Is it easy? Do I have to buy expensive 3rd-party software to do it? One more thing: it would be even better if there was a way to stuff this data into the Audit Collection Services (ACS) database instead of the main one, but I'll take what I can get. Any help would be greatly appreciated.

  Read the article

• How use DNS server to create simple HA (High availability) of my website?

  - by marc22

  Welcome, How can i use DNS server to create simple HA (High availability) of website ? For example if my web-server ( for better understanding i use internal IP in real it will be other hosting companies) 192.168.0.120 :80 (is offline) traffic go to 192.168.0.130 :80 You have right, i use bad word "hight avability" of course i was thinking about failover. Using few IP in A records is good for simple load-balancing. But not in case, if i want notice user about failure (for example display page, Oops something is wrong without our server, we working on it) against "can't establish connection". I was thinking about setting up something like this 2 DNS servers, one installed on www server Both have low TTL on my domain, set up 2 ns records first for DNS with my apache server second to other dns If user try connect he will get ip of www server using first dns, if that dns is offline (probably www server is also down) so it will try second NS record, what will point to another dns, that dns will point to "backup" page. That's what i would like to do. If You have other idea please share. Reverse proxy is not option, because IP of server can change, or i can use other country for backup.

  Read the article

• how to design pound -> varnish -> jboss for ha + loadbalancing

  - by andreash

  Hello, I'm planning a new infrastructure for our web application. We have two JBossAS5 servers, running in a cluster. Session state will be replicated via JBoss Cache. In front of that, there should be some cache, to speed up delivery of static elements. However, most of the traffic to our app will be via HTTPS. So far, I had been thinking of two Varnish caches in front of the JBossASs, each being configured for loadbalancing to the two JBossASs via round-robin. Since Varnish doesn't handle HTTPS, then there would need to be two pound proxies in front of the Varnishs, dealing with the HTTPS. The two pounds would be made high-available with Heartbeat/LinuxHA. The traffic to www.example.com would then be going through our firewall, from there to the virtual IP of the pounds, from there to the Varnishs, and from there to the JBossASs. Question 1: Does this make sense? Or is it overly complicated, and the same goal can be reached with simpler methods? Question 2: If my layout is fine, how do I configure the pound - Varnish step? Should I a) make the Varnish service high-available through Heartbeat/LinuxHA as well and direct traffic from pound to the virtual IP of the Varnishs, or should I rather b) Configure two independent Varnishs and use load-balancing in pound to address the different Varnishs? Thanks a lot for your insight! Andreas.

  Read the article

• Move postfix maildir files from one mail server to another

  - by Tauren

  I have a new mail server configured as described in this howto: http://howtoforge.com/virtual-users-domains-postfix-courier-mysql-squirrelmail-ubuntu-9.10 I also have an ancient mail server configured very similarly (using the same HOWTO, just for Fedora Core 6, if I recall correctly). Earlier today I had to switch from the old server to the new one, and the old one is no longer online. However, after I had migrated everything and switched it all over, I discovered a bunch of undelivered mail in the queue. It got delivered to the local mailboxes on the old server, so now there are a bunch of messages on it that I'd like to move to the new server. The new server has already received new messages, so I need to merge the files together somehow. For each user with an email of [email protected], there are files like this on both servers: /home/vmail/customer.com/username/maildirsize /home/vmail/customer.com/username/courierpop3dsizelist /home/vmail/customer.com/username/new/1271481177.Vca01I6006bM580357.mailhost.mydomain.com Can I simply copy the hundreds of files in the various new directories on the old server to the corresponding new directories on the new server? Will the maildirsize and courierpop3dsizelist files get updated automatically, or do I need to do something to update them?

  Read the article

• How can I manage AWS VPC ssh access accounts and keys across multiple instances?

  - by deitch

  I am setting up a standard AWS VPC structure: a public subnet some private subnets, hosts on each, ELB, etc. Operational network access will be via either an ssh bastion host or an openvpn instance. Once on the network (bastion or openvpn), admins use ssh to access the individual instances. From what I can tell all of the docs seem to depend on a single user with sudo rights and a single public ssh key. But is that really best practice? Isn't it much better to have each user access each host under their own name? So I can deploy accounts and ssh public keys to each server, but that rapidly gets unmanageable. How do people recommend managing user accounts? I've looked at: IAM: It doesn't like like IAM has a method for automatically distributing accounts and ssh keys to VPC instances. IAM via LDAP: IAM doesn't have an LDAP API LDAP: set up my own LDAP servers (redundant, of course). Bit of a pain to manage, still better than managing on every host, especially as we grow. Shared ssh key: rely on the VPN/bastion to track user activities. I don't love it, but... What do people recommend? NOTE: I moved this over from accidentally posting in StackOverflow.

  Read the article

< Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319  | Next Page >