sharepoint upgrade - Page 312

Networking lost after update from Debian Wheezy to Jessie

- by Charaf

I am currently setting a Virtual Machine for development purposes. I did a big part of this configuration under Wheezy, but I need some debs that were available only on Jessie. So, I've updated the sources.list and did a dist-upgrade. Everything went well, but after the reboot, I noticed that I lost all the networking. Repositories are unreachable, as well as a simple ping google.fr returns nothing. What can I do to quickly restore networking so that I can continue my working. I have a poor connexion and can not afford to download the whole install DVDs. root@vm~# ifconfig lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:65536 Metric 1 RX packets:452 errors:0 dropped:0 overruns:0 frame:0 TX packets:452 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:164238 (160.3 KiB) TX bytes:164238 (160.3 KiB) root@vm~# I am running VMware 1.0.1 build 1379776 and the last update of Jessie (debian 3.14.4-1) Please help. Thanks.

Read the article

Chipset fan on the frtiz - compressed air hasn't fixed anything - is there anything I can do?

- by Anthony

Yesterday, my computer started to make an annoying whining noise. Knowing that this is likely a fan issue, I opened the case and proceeded to determine which fan was causing the issue. I got some compressed air and tried cleaning out the dust around it (and the rest of the computer while I was at it). This hasn't seemed to fix the issue. Now, if it were just any fan, I would probably just replace the fan - they're relatively cheap after all. However, this is a special fan. Aside: For what its worth, I feel bad that the graphics card blocks part of the fan, but it is the only slot the graphics card fits, so I had no choice. After pulling out my motherboard user guide, it looks like this is a fan placed directly on top of the chipset. To be perfectly honest, I have no clue what the purpose of the chipset is - but it sounds important. After some quick research, I see that it is responsible for providing the bridge between my CPU, RAM and graphics, among other things. Just a quick search at Newegg tells me that chipset fans can be purchased at pretty reasonable prices (< 20 dollars). Is it practical to replace this fan? It is an old computer as computers go and I wouldn't be terribly upset to upgrade the motherboard and processor, so perhaps this is a sign. Hardware Specs: Motherboard: Asus A8N-E Chipset: NVIDIA nForce4 Ultra

Read the article

Are applications optimized for XenApp?

- by damitamit

Our IT dept are about to deploy virtualized apps using Citrix XenApp. One of these apps will be Dynamics AX 4.0 SP2, a ERP client (which I develop on). They have supposedly reached a roadblock because an external 'Dynamics AX Consultant' has told our IT Dept that Dynamics 4 will not work optimally on Citrix and will run very slow because it is not optimized for Citrix. We have it running in a Test environment now and seems ok. They have been told that the only 'solution' is to upgrade to Dynamics AX 2009 where supposedly this problem as been fixed. (not a small task for my team!) When I heard about this, I was quite surprised. From my brief knowledge of Citrix, I thought it would be application independent. How does the citrix app virtualization work, in that a particular app would work better than others on citrix? Would the speed of the virtualized app not just depend on the resources/network connection the citrix server has? FYI, Dynamics AX is a 3-tier client/server system, so the client will be accessing a AOS application server, which then accesses the database. Please enlighten me :)

Read the article

How to transfer Windows Vista disk image to new machine

- by Mike Hobbs

I'm trying to upgrade a user's machine to some better hardware. I know of Easy Transfer, but I'd rather not have to reinstall all the programs that are already present. (Some of which are no longer available, anyway). Instead, I'm trying to transfer the entire disk image from one machine to the other, but I ran into issues. If I copy the partition image over to the new machine using Clonezilla, I get errors on boot saying that I need to insert the Vista install disk and run repair. I do that, but it then says that it is unable to repair whatever it is that's broken. Next, I tried to sysprep the old machine before creating the image, but sysprep fails saying that it encountered some sort of system error. Should it be possible to sysprep any arbitrary machine, or does it only work on a relatively clean install? Could it be a missing driver that is tripping me up? The new machine is a fairly stock desktop that shouldn't need any special drivers beyond what's already present in standard Vista. Are there any foolproof methods for doing this sort of thing?

Read the article

update from debian lenny to squeeze

- by Daniel

I'm trying to update from debian lenny to squeeze on my 64bit root server and did the following so far: modifying sources.list apt-get update apt-get upgrade apt-get install linux-image-2.6-amd64 The last step leads to the following error-output: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: linux-image-2.6-amd64: Depends: linux-image-2.6.32-5-amd64 but it is not going to be installed E: Broken packages UPDATE: here's my sources.list deb ftp://mirror.hetzner.de/debian/packages squeeze main contrib non-free deb ftp://mirror.hetzner.de/debian/security squeeze/updates main contrib non-free deb http://ftp.de.debian.org/debian squeeze main non-free contrib deb-src http://ftp.de.debian.org/debian squeeze main non-free contrib deb http://security.debian.org/ squeeze/updates main contrib non-free deb-src http://security.debian.org/ squeeze/updates main contrib non-free How can I fix that safely? thx

Read the article

32 core (each physical core) 2.2 GhZ or 12 core (6 physical cores) 3.0GHZ?

- by Tejaswi Rana

I am working on a multithreaded application (Forex trading app built on C#) and had the client upgrade from the 12 core 3.0GHZ machine (Intel) to a 32 core 2.2 Ghz machine (AMD). The PassMark benchmark results were significantly higher when using multicores doing Integer, Floating and other calculations while for a single core calculation it was a bit slower than the pack (others that were being compared to with similar config as the 12 core one). Oh it also comes with 64 GB RAM (4 times as the other one) and a much faster SSD. So after configuring and running the application on that machine, not only did it not perform as well, it was significantly slower. We're talking about 30seconds - 1 minute slower on an app that usually completes processing within 5-20 secs. The application uses MAX DEGREE of PARALLELISM (TPL) which I've tried setting to number of cores and also half of that. I've also tried running single threaded and without setting any limits in parallel threading. While it may be the hardware has some issues, I am wondering if the CPU processing speed is the issue. I can overclock to 3.0 GHZ. But is that even a good idea? Server Info - AMD http://www.passmark.com/forum/showthread.php?4013-AMD-Dual-6272-performance-is-60-lower-than-benchmarks Seems that benchmark was wrong to start with - officially. Intel i7 3930k OS (same in both) Windows 7 Professional 64-bit

Read the article

Migrate Domain from Server 2008 R2 to Small Business Server 2011

- by josecortesp

I'm looking for some advice here, rather than the big how to do it I'm looking for what do to I have this home server, quad core and 4 GB of ram (I really can't afford more right now). With a Windows Serve 2008 R2 With ActiveDirectory and a Hyper-V-Virtual machine with SharePoint, TFS and a couple of more thigs. I have a least 10 remote users, all of them joined a Hamachi VPN (working great by the way). But I want to migrate that to a Small Business Server 2011 Standard. I tried to make a VM to join the domain and then promote that VM, back up it and then format the physical server, boot up the VM, Promote the Phisical and then erase the VM, but I can't do that because of SBS requiring a least 4 GB of ram to install (so I can't give all the 4 GB of physical ram to a VM). I was thinking in using a laptop (All the clients are laptop) as a temporal server, join the domain, promote it, then format the server and install SBS on the server and do all again. I really need some advice. Thanks in advance. BTW, I know that the software I'm using is kindda expensive, and I can't afford more hardware. I have access to MS downloads by a University partnership so I have all this software for free.

Read the article

cPanel web servers mounting home partition to a NAS or SAN

- by Scott

I currently have 2 cPanel web servers that are little 1RU dual cpu quad core xeons. They have a lot of resources for processing and handling web requests, and never exceed more than 10% cpu usage. They also have plenty of RAM. The problem is though that they both have RAID 1 160Gb SAS hard disk drives in them that are 75% full, and growing by the day. I didnt think that the amount of disk usage would be so high, but due to the nature of the sites hosted, this has become an issue. The easy fix would be just to upgrade the hard drives to something bigger (probably not of the SAS variety), but I am thinking of keeping the current machines as "processing servers" and buying a central "storage server" with about 12TB of storage. The /home/ partition on each of the 1RU servers would be mounted to a NAS or SAN point on this central storage server. My questions are: - Has anyone got a cPanel setup where they mount /home/ to a NAS or SAN elsewhere? If so, can you provide details as to what you did and how it went :) - Any recommendations on networking? Is gigabit ethernet enough? Is TCP/IP going to be a noticable performance problem? Anyone used a TOE key? - Anyone benchmarked or had any performance issues with SAN over NAS? Any help greatly appreciated. Scott

Read the article

Streaming to PS3 with NAS and built-in dlna server?

- by philt

With consumer-grade hardware, is it possible to successfully stream 1080p mp4 videos to a PS3? I have a linksys router that can only do 10/100. The PS3 is wired to it with cat5e cable, and the PS3 itself supports gigabit ethernet. I would upgrade the router and get one that supports gigabit ethernet if it could handle streaming like this. It currently does work with minor jerkiness streaming from my mac to the PS3, but fast-forward/reverse and "goto" (equivalent of scene selection) take forever and/or fail completely. And streaming from my mac of course requires the mac to be on at all times. When I put the movies on an external USB drive and connect to the PS3 directly, it performs flawlessly. Fast forward and everything works great. So I was thinking about getting a NAS, but I don't know if any inexpensive NAS (i.e. Buffalo Linkstation Live, WD My Book World Edition, D-Link DNS-321, etc.) can actually deliver the performance necessary to do this, even with gigabit ethernet?

Read the article

IIS 7.5 error 500 in fastcgi module after upgrading wordpress to 3.0.2

- by Maniac13

I am running multiple wordpress blogs on the following setup: Server 2008 R2; IIS 7.5; PHP 5.3.3; MySQL 5.0.7; I upgraded my wordpress install from 2.9.2 to 3.0.2 (on 2 different sites) today and the upgrade went fine. I can serve .php pages without errors, log into the admin system etc. I can browse my blog by going directly to mywebsite.com/index.php, but when I try to go to mywebsite.com (without the index.php) I get he below 500 error. I reset IIS, removed and re-attached the default document, but I am running out of ideas. Please if anyone has a solution for this that would be great. This is the 500 error I am getting: Error Summary HTTP Error 500.0 - Internal Server Error The page cannot be displayed because an internal server error has occurred. Detailed Error Information Module FastCgiModule Notification ExecuteRequestHandler Handler PHP FastCGI Error Code 0x00000000 Requested URL http://mywebsite.com:80/index.php Physical Path D:\mywebsite.com\index.php Logon Method Anonymous Logon User Anonymous Thanks Stephan

Read the article

Need help diagnosing my machine

- by Tom Collins

I have something that just slows my computer to a crawl sometimes. Not running anything big. Yesterday all I had running (besides background apps) were Firefox & Windows Explorer and could barely even switch screens. Nothing showing up in the task manager as hogging CPUs. I have all non-essential services stopped (MySQl & MSSQL) unless I need them. I made some restore points not long ago, but they disappeared. This is a development mach with a LOT of apps installed, so I really, really do not want to re-install Windows. So, what I'm looking for are ideas or tools I can use to help diagnose this problem. The only clues I have is this started right after I installed Office 2013 (with Office 2010 still installed as well) installed Visual Studio 2012 (also keeping 2010 as a co-install) and installed MSSQL 2012 (upgrade from 2008, no co-install) Also, computer runs fine in Safe Mode. I've just ran out of ideas of what to check. Any help / suggestions would much appreciated. Thanks P.S. I'm running Win 7 Pro (x64). Office is also 64 bit. Visual Studio & MSSQL are 64 bit if that option was available (not sure).

Read the article

Kubuntu: apt-get install of php5-dev: libtool version mismatch?

- by pinkgothic

(Warning, clueless-newbism ahead.) Background info: I'm actually trying to install/upgrade xdebug. sudo pecl install xdebug yields: downloading xdebug-2.0.5.tgz ... Starting to download xdebug-2.0.5.tgz (289,234 bytes) ............................................................done: 289,234 bytes 67 source files, building running: phpize sh: phpize: not found ERROR: `phpize' failed A quick google tells me that phpize is a part of a package called php5-dev, so off I ran to install that. My problem is that using sudo apt-get install php5-dev fails with this output: sudo apt-get install php5-dev Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: php5-dev: Conflicts: libtool (>= 2.2) but 2.2.6a-4 is to be installed E: Broken packages 2.2.6a-4 is greater than 2.2, so I'm not sure why it's hanging itself up at that point. I'm guessing the fact that it's not entirely numeric is throwing apt-get off? I can probably install xdebug manually (though I've never done this before, so picture me with a deer clueless-newb in headlights look here, violently shaking my head and begging for a simpler solution) rather than via pecl / aptitude, but is there a way I can make aptitude install php5-dev despite the bogus 'broken package' claim? Is it even bogus, or am I misreading the error message? Alternatively: Could I install phpize in some other way (e.g. via pear or pecl)?

Read the article

Kubuntu: apt-get install of php5-dev: libtool version mismatch?

- by pinkgothic

(Warning, clueless-newbism ahead.) Background info: I'm actually trying to install/upgrade xdebug. sudo pecl install xdebug yields: downloading xdebug-2.0.5.tgz ... Starting to download xdebug-2.0.5.tgz (289,234 bytes) ............................................................done: 289,234 bytes 67 source files, building running: phpize sh: phpize: not found ERROR: `phpize' failed A quick google tells me that phpize is a part of a package called php5-dev, so off I ran to install that. My problem is that using sudo apt-get install php5-dev fails with this output: sudo apt-get install php5-dev Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: php5-dev: Conflicts: libtool (>= 2.2) but 2.2.6a-4 is to be installed E: Broken packages 2.2.6a-4 is greater than 2.2, so I'm not sure why it's hanging itself up at that point. I'm guessing the fact that it's not entirely numeric is throwing apt-get off? I can probably install xdebug manually (though I've never done this before, so picture me with a deer clueless-newb in headlights look here, violently shaking my head and begging for a simpler solution) rather than via pecl / aptitude, but is there a way I can make aptitude install php5-dev despite the bogus 'broken package' claim? Is it even bogus, or am I misreading the error message? Alternatively: Could I install phpize in some other way (e.g. via pear or pecl)?

Read the article

TV-out worked, now doesn't. May the problem be the cable, TV, driver, OS, graphic card?

- by Petruza

I have a CRT TV hooked to the PC, which once worked great, now doesn't. I can't consider getting a newer TV, this one is used in an MAME arcade cabinet so it has to be a CRT for best old school look and feel. It's connected through the TV-out connector of my graphic card. When it worked, I had Windows XP, the same PC and the same card. Now I have windows 7, not sure if the OS switch caused the malfunction as I don't use the TV-out all the time. Can it be an upgrade of the Nvidia driver? I thought it may be the S-video to RCA cable, but tried 3 different cables and neither worked. In fact, one of them, that unlike the other two, has a single RCA output connector instead of two, behaves differently, although it doesn't work, but it does the following: When I open the NVidia settings panel, or when I change a setting and click Apply then the TV flashes for a split second and you can see the windows screen, but then it goes back to blank. So any clues what can be failing here, and some advice? Possible failures, please comment on the one you suspect the most: NVidia driver version Windows version Cable Graphic card's TV out other?

Read the article

SBS 2003 stops to respond often due to limited memory

- by Sanoj

I have a Windows SBS 2003 Std that regularly stops to respond (crashes), in about every 20th day. The only thing I can see in the logs (the one that are mailed to the administrator) is that used memory increases with about 30MB/day. The process that uses more and more memory is sqlservr. We don't have much installed on the server; a Point-Of-Sale-system that uses Pervasive SQL as database and an Accounting application. We just have 2GB of RAM and I could upgrade to 4GB but I think that this just delay the problem. When the server stops to respond, the screen saver cannot be deactivated, no DNS-look-ups is working so the client's can't access Internet. And applications on the server do not reply. And we have to press the power-button to restart the server. For the moment it has an uptime of 19 days and have 2 345MB in memory use (idle) and sqlservr is using 819 MB. So I guess it will crash soon. Is there any solution to this problem? Could I limit sqlservr to some memory?

Read the article

SQL Server Installation: Is it 32 or 64 bit?

- by CapBBeard

Recently I was performing an OS upgrade on one of our DB servers, moving from Server 2003 to Server 2008. The DBMS is SQL Server 2005. While reinstalling SQL on the new Windows installation, I went to another of our DB servers to verify a couple of settings. Now, I always thought this second server was Server 2003 x64 + SQL 2005 x64 (from what I'd been told), but I now have my doubts about this. I now suspect that it is in fact only 32 bit SQL, however I'd like to verify this. Here's some details: The OS is definitely 64 bit. xp_msver shows Platform as NT INTEL X86 SELECT @@VERSION shows Microsoft SQL Server 2005 - 9.00.4035.00 (Intel X86)... However sqlservr.exe is not shown with '* 32' in taskmgr, does anyone know why this is the case, if it is in fact 32 bit as claimed? Despite this, it does seem to be running out of the x86 program files folder. If I do the same checks on a confirmed 64 bit installation, it does give back the expected 64 bit readings, which can only prove that this server in question is only running in 32 bit. Now, that being the case, the question arises about how much memory this '32 bit' install can use. Task manager reports about 3.5GB memory usage for sqlservr.exe (The server has 16GB physical). I suspect that AWE has not been configured at all, and therefore the server will be significantly under-utilised (remembering that the OS is 64 bit) if SQL is simply using a 32bit address space. Is this assumption correct? I feel the server should have SQL reinstalled as 64 bit in order to fully utilise the hardware platform, however it is currently heavily in production; this will be no easy task. I suspect we may just have to configure AWE correctly and let it be for the time being (Unless this is a bad idea?). I apologise that this question is a little vague/lost; I'm no SQL expert, just trying to get a handle on what's going on here.

Read the article

linux mint VIA sound issue

- by user2699451

So I installed linux Mint 15 "Olivia" 64 bit on my Mecer W550EU laptop I have HD Audio with a VIA chipset charles-W55xEU charles # lsmod | grep snd snd_hda_codec_hdmi 36913 1 snd_hda_codec_via 51018 1 snd_hda_intel 39619 5 snd_hda_codec 136453 3 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel snd_hwdep 13602 1 snd_hda_codec snd_pcm 97451 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel snd_page_alloc 18710 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 snd_seq_midi_event 14899 1 snd_seq_midi snd_rawmidi 30180 1 snd_seq_midi snd_seq 61554 2 snd_seq_midi_event,snd_seq_midi snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi snd_timer 29425 2 snd_pcm,snd_seq snd 68876 19 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_via,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device soundcore 12680 1 snd And my sound card charles-W55xEU charles # aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: VT1802 Analog [VT1802 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 2: VT1802 HP [VT1802 HP] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 and my audio device charles-W55xEU charles # lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High `Definition Audio Controller (rev 04)` Subsystem: CLEVO/KAPOK Computer Device 0550 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at f7c10000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Sometimes when I boot up, soundworks, other times it doenst, it is completely random, so far, no-one on xchat linux help or linux mint forums was able to help me, I have always had issues with sound on VIA chipsets I have: sudo apt-get upgrade && apt-get install mint-meta-cinnamon it seemed to help but after 2-3 reboots, the problem came back, btw, everytime I checked, pulse audio is selected to Duplex Audio Input & Output and alsa mixer is always unmuted!

Read the article

Struggling to set-up NLB cluster

- by Chris W

I'm trying to set up NLB on a couple of Windows 2008 R2 virtual servers running on top of Hyper V R2. The servers each have a single vNIC for LAN access (and a second vNIC for SAN access). I'm setting up the cluster to use Multicast mode. The vNICs are each set to allow MAC spoofing. Essentially I'm finding that i can add SERVER1 as a host and it will pick up and respond to the cluster IP from a remote subnet. If I then 'stop' the node in NLB manager it still responds when I would expect it to stop answering on that IP. If I recreate the cluster and add SERVER2 as the first host, the wizard completes correctly and an IPCONFIG on the server shows that it now has the cluster IP but I can't ping the cluster IP from a remote subnet but I can from another machine on the same subnet. As a final test - with both servers in the cluster, pinging from another machine on the same subnet I still get a response from the cluster IP when both nodes are stopped according to the NLB manager. The two VMs are sat on the same physical blade and are built up exactly the same as they'll be used as SharePoint web front end servers. I'm at a loss as to what could be wrong with the second VM that prevents it taking on the address just as the sole node in the cluster, never mind the strange behaviour of the cluster when I stop/start nodes.

Read the article

Upgrading openSUSE 11.1 with Plesk Panel 9.3 to PHP 5.3

- by Jonathan Hogervorst

Hello, I'm running a VPS with openSUSE 11.1 (i586). On the VPS is Parallels Plesk Panel 9.3.0 installed. The current PHP-version is PHP 5.2.11. I want to upgrade PHP to PHP 5.3, but I can't find good instructions on how to do this. If I check for updates in Zypper, it says this is the latest release. In the Plesk Updates isn't an update either, both via the webbased interface and the command line interface. On Software.openSUSE.org I can find packages for PHP 5.3.1 in both the server:php/server_apache_openSUSE_11.1-repo and the server:php/openSUSE_11.1-repo (can't post the link because I'm a newbie here). But if I add one of those to Zypper, I still don't see an update. Is there here somebody who knows how to do this? And is it completely safe to update that way? I don't want to end up with a broken VPS... Thanks! Jonathan

Read the article

How to install port versions of perl modules for perl5.14 in freebsd 9.0

- by jm666

Trying to use perl5.14 on Freebsd with port based p5-modules. uname -impr 9.0-RELEASE amd64 amd64 ALTQ delete all installed ports, start with a clean system # pkg_delete -a # rm -rf /var/db/pkg /var/db/ports /usr/local installing portmaster, checking /etc/make.conf (here is only WITHOUT_X11=YES). Now installing perl. # portmaster -g --force-config lang/perl5.14 # perl -v This is perl 5, version 14, subversion 2 (v5.14.2) built for amd64-freebsd-multi Now perl modules from the ports, # portmaster -g devel/p5-Moose #install Moose and its deps check with pkg_info and got zilion errors like: # pkg_info pkg_info: corrupted record (pkgdep line without argument), ignoring dpendecy check with portmaster - showing dependecies on perl5.12 #portmaster --check-depends Checking p5-Class-C3-0.24 ===>>> lang/perl5.12 is listed as a dependency ===>>> but there is no installed version ===>>> Delete this dependency data? y/n [n] when tried # perl-after-upgrade -f got: Fixed 0 packages (0 files moved, 0 files modified) In short: i got installed Moose into /usr/local/lib/perl5/site_perl/5.14.2/ but all its dependencies into /usr/local/lib/perl5/site_perl/5.12.4/ Yes, it is possible fix this with: # portmaster p5- what reinstall all installed p5-packages once again, now correctly for the 5.14 but it is terrible installing them twice... Questions: What is the correct way install p5-MODULES from ports with installed perl5.14 in an clean system? How to fix wrong dependency data on perl5.12 without the need install and reinstall them again What i'm doing wrong? Ps: know perlbrew and/or Local::lib - but for this case - want port versions.

Read the article

Windows installation repair option not showing up

- by Jason

I'm trying to repair an existing Windows XP installation. Following the instructions from http://www.microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/doug92.mspx this should work: - 1.When the Press any key to boot from CD message is displayed on your screen, press a key to start your computer from the Windows XP CD. - 2.Press ENTER when you see the message To setup Windows XP now, and then press ENTER displayed on the Welcome to Setup screen. - 3.Do not choose the option to press R to use the Recovery Console. - 4.In the Windows XP Licensing Agreement, press F8 to agree to the license agreement. - 5.Make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP. - 6.Follow the instructions on the screen to complete Setup. On step 5 pressing R does nothing and there is nothing on the screen saying it would. When I just select to install I get a message that a previous installation is there and proceeding will destroy it and installed applications, I can optionally select a directory other than c:/windows, and I can optionally format before continuing. I had tried to go from SP2-SP3. It failed, and then I couldn't get to Safe Mode. I put the SP1 disk back in to do a repair, and I don't see that option. (I don't have an SP2 boot/install disk, I just have the non-boot upgrade package.)

Read the article

Debian apache2 restart fault after some updates

- by Ripeed

can anyone give me an advice with this please: I run update on my debian server by Webmin. After updating some apache2 and etc. It shows update fail. After that I cant start apache2. I must run netstat -ltnp | grep ':80' Then kill pid kill -9 1047 and now i can start apache2 When I started it first time after update some websites on fastCGI wont work I must change them in ISPconfig3 to mod-PHP and now works NOW - I cant restart apache without kill pid. In log of ISP I see Unable to open logs (98)Address already in use: make_sock: could not bind to address [::]:80 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down In log of some website I see [emerg] (13)Permission denied: mod_fcgid: can´t lock process table in pid 19264 Do you thing it will be solution update everithing by: apt-get update and apt-get upgrade to complete all updates? I have little scare if I do that then next errors will occur. If I look at apache log i see error: Debian Python version mismatch, expected '2.6.5+', found '2.6.6' But that was there before that problem before. Thanks A LOT for help.

Read the article

Upgrading Visio 2000 to Visio 2007

- by dirtside

I have Microsoft Visio 2000 SR 1, and recently purchased Microsoft Office Visio Standard 2007 with the understanding (supported by the product info and some other research) that I'd be able to upgrade. However, when I install 2007, it tells me it can't find a previous install of Visio, but... it's right there! Here's the exact message: "Setup can't find a version of Microsoft Office on your computer. If Office is installed on a disk or network share, click the browse button to select the appropriate disk or share... (etc.)" No matter which directory or drive I pick (various Office installs, the old Visio install, various subdirectories) it gives the following message: "The path you have chosen does not point at a qualifying upgradeable product. Click 'Retry' to try again or 'Cancel' to quit setup." Any ideas? This is a legit copy of Visio 2007 (purchased from Amazon) and the copy of Visio 2000 is legit as well. I'm not sure what exactly the installer is looking for that it would consider a "qualifying upgradeable product". A specific file?

Read the article

samba "username map" stopped to work

- by Kris_R

It was time to upgrade our group server (new HDs, problems with old installation of DRBD, etc..). Going as usually for CentOS i upgraded whole system from 6.3 to 6.4 The later one came with samba 3.6 as the old one was 3.5. I transferred most of users by copying /etc/password, /etc/shadow and samba accounts with pdbedit. Homes were on nfs-drive. The translation of unix accounts to samba accounts are located in /etc/samba/smbusers. Strangely enough on some windows clients there was problem to connect to samba-shares. In one case the only thing that worked was, instead of giving windows name, to use the unix account. In another one, it was possible to mount network drive and to open it in Windows Explorer, however other applications like "Total commander" at the attempt of opening this drive gave the message "Cannot connect to z:" (sometimes at this moment user/pass were requested). The smb.conf has following entries: [global] security = user passdb backend = tdbsam username map = /etc/samba/smbusers ... [Kris] comment = Kris's Private path = /SMB/Users/Kris writeable = yes read only = no browseable = yes users = krisr printable = no security mask = 0777 force security mode = 0 directory security mask = 0777 force directory security mode = 0 force create mode = 0775 force directory mode = 6775 The smbusers: # Unix_name = SMB_name1 SMB_name2 ... krisr = Kris Of course testparm runs without any errors. I was used from samba 3.5 to outputs of form Mapped user Kris to krisr. Nothing like this happens now. Just message check_sam_security: Couldn't find user Kris in passdb. I read on web that some guys had problem with 3.6 and security = ADS, but these were not helpful for me. I'm seriously thinking about downgrading back to samba 3.5 but before this step I wanted to ask if somebody knows the solution of these problems. p.s. i've asked this question at serverfault but no answer came. Maybe I have more luck with this forum. Sorry for duplicate if any of you reads both.

Read the article

Sun T5120: Memory issue with 8GB DIMMs, "Unsupported memory configuration"

- by watain

Search Results

Search found 8856 results on 355 pages for 'sharepoint upgrade'.

Page 312/355 | < Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319 | Next Page >

- by Charaf

- by Anthony

- by damitamit

- by Mike Hobbs

- by Daniel

- by Tejaswi Rana

- by josecortesp

- by Scott

- by philt

- by Maniac13

- by Tom Collins

- by pinkgothic

- by pinkgothic

- by Petruza

- by Sanoj

- by CapBBeard

- by user2699451

- by Chris W

- by Jonathan Hogervorst

- by jm666

- by Jason

- by Ripeed

- by dirtside

- by Kris_R

- by watain

< Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319 | Next Page >