Search Results

Search found 11003 results on 441 pages for 'usb storage'.

Page 312/441 | < Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319  | Next Page >

  • Best practice Raid groups for EqualLogic PS6510X

    - by 20th Century Boy
    We are thinking about purchasing 4 x EqualLogic PS6510X SANs (the Sumo boxes). Each has 48 x 600GB 10k SAS drives. They will be stacked to form a logical pool of storage (all in the same location). I understand that when you create a RAID group its done on a "per box" basis. So one box could be Raid 50, another Raid 10 etc. My question is, should I make one box a "performance" box ie Raid 10, and the other boxes "standard" ie Raid50? How do people configure their EQL arrays in the real world?

    Read the article

  • Can one build a single disk RAID 1 array?

    - by Core Xii
    I have an Nvidia hardware RAID 1 array and need to reformat. But I don't have any spare storage media, so I need to get along with the 2 disks in the array. I figured I'd do as follows: Delete the array, so I have 2 separate but identical disks, A and B, with my files Put disk B aside Reformat disk A, build RAID 1 array with it, install Windows XP Put disk B back in Boot to Windows on disk A, copy my files from disk B to disk A Add disk B to the RAID 1 array, rebuild array And now I'd have a new RAID 1 array, fresh install and all my files intact (the ones I copied). Here are the parts I'm unsure about: Can I build a RAID 1 array using just one disk, then add the other one later? Can Windows on disk A see disk B and allow me to copy my files over?

    Read the article

  • Restoring using SyncBack without profiles

    - by Thomas Matthews
    I backed up my internal hard drive (C:) using SyncBack onto an external (USB) hard drive with maximum compression. I then performed a clean install of Windows Vista onto the computer. I forgot to copy the SyncBack logs before the clean install. And now when ever I try to restore a directory, the RAR/ZIP files are copied to the system hard drive instead of extracting their contents to the hard drive. Also, SyncBack is not traversing the folders during the Restore process. How can I tell SyncBack to expand the compressed files? I am running the freeware version of SyncBack. I have to create new log files (unless SyncBack put them somewhere on the external drive). My alternative is to write a program that traverses the folders on the external drive and extracts files from the RAR/ZIP files. I am using Windows Vista, Service Pack 2, and the data size prior to backup was about 200 GB. (The backup process took over 72 hours due to "hiccups").

    Read the article

  • setting up/installing/configuring nginx LEMP stack on fresh VPS server

    - by Grant Tailor
    I need some help in settingup/installing and configuring nginx LEMP stack on a fresh new VPS I have. The specs of the CentOS 5.7 VPS are 2GB DDR3 ECC RAM(4GB burst), 1 core 1.5Ghz(3Ghz burst) and 100GB RAID 10 storage, unmetered bandwidth @ 100Mpbs all for a whopping $25/month(unbeatable, yeah I know :) Anyways I have followed this LEMP (will also need MySQL and PHP) stack guide on linode http://library.linode.com/lemp-guides/centos-5 but basically what I want is to be able to host multiple website on this webserver after everything is setup. I am used to using DirectAdmin control panel on other server and want to have things setup so I can host multiple websites - mostly wordpress and drupal themes. Lets say 10 websites on this nginx web server. So can someone please help me on what I need to do to take "full" advantage of nginx power and performance, while been able to easily manage these multiple websites (wordpress and drupal themes)?

    Read the article

  • is a mini PCIe SSD worth it?

    - by Narcolapser
    Question: Is getting a mini-PCIe worth investing in? Info: I have a an Acer Aspire 1 n270. It has this mini PCIe slot that is just sitting there empty. I would like to change this, and I would like to speed up my boot time. So I've been considering getting a mini-PCIe SSD. They are about the same price as faster same size drives of the 2.5" variation. The advantage of the mini-PCIe card is that I can have my HDD still. So I have good boot time, but still have the storage of my HDD. What I want to know is: will this allow me to spin down the HDD more often allowing me to save power? Will the OS (Ubuntu 10.04 LTS) see them as separate drives? Is there anything that the mini-PCIe slot could be better used for? Thanks. ~n

    Read the article

  • BSOD on windows 7 with SSD during boot after improper shutdown

    - by Bob
    I have a BSOD on windows 7 with SSD during boot after improper shutdown (while windows animation logo is moving). The computer restart imediatly after BSOD, and windows proposes to launch startup repair (if i do it, it takes +-5min and fixes the problem : computer starts normally). However, after any new improper shutdown, i got the same problem. Remarks: If i unplug, re-plug the SSD whyle system is shutdown, i have the same problem. If i reproduce the situation with old HDD, i havn't the problem Previously, i had a different problem: BSOD when waking up after sleep, which was fixed by installing drivers (ethernet, usb, graphic card) I have made ram chech and ssd check and found no problems Starting with safe mode after improper shutdown causes a BSOD at loading of classpnp.sys Configuration: System: HP compaq 8510p SSD: OCZ vertex-2 2.5 Boot options: SATA native mode - Enable, HDD transalation mode - LBA-assisted

    Read the article

  • syntax error in sql query?

    - by user1550588
    I want to create some tables in database so for that i wright some queries to create table. but i got an error "there was a syntax error in your sql statement". I check all my queries but i am not able to find what syntax i wright wrong. here i attached my sql queries please told me what is wrong with queries. Thanks in advance. CREATE TABLE "WATER&SEWAGE" { "CUSTOMER_ID" VARCHAR, "POTABLE_WATER" VARCHAR, "HOT_WATER" VARCHAR, "SAFETY" VARCHAR, "T/P_VALVE+EXT" VARCHAR, "HEATER_TYPE" VARCHAR, "GAS_VENT_CONDITION" VARCHAR, "FIRE_BOX_CONDITION" VARCHAR, "PRESSURE" VARCHAR, "BACK_FLOW" VARCHAR, "PLUMBING_CONDITION" VARCHAR, "CABINET_CONDITION" VARCHAR, "3_COMP_SINK" VARCHAR, "WATER_HEATER" VARCHAR, "CLEAN_OUT_CONDITION" VARCHAR, "FLOOR_DRAIN" VARCHAR, "FLOOR_SINK" VARCHAR, "MAINTANANCE" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "TIME_AND_TETMPERATURE_REL" ("CUSTOMER_ID" INTEGER, "THERMOMTE_AVAILABLE" VARCHAR, "THERMO_TYPE" VARCHAR, "COLD_TEMP" VARCHAR, "FOOD_TYPE1" VARCHAR, "PROPER_COOLING" VARCHAR, "FOOD_TYPE2" VARCHAR, "COMPLIANCE" VARCHAR, "FOOD_TYPE3" VARCHAR, "TPHC" VARCHAR, "HACCP" VARCHAR, "HOT_HOLDING_TEMP" VARCHAR, "FOOD_TYPE4" VARCHAR, "HOT_TEMP" VARCHAR, "FOOD_TYPE5" VARCHAR, "IMPROPER_REHEATING" VARCHAR, "FOOD_TYPE6" VARCHAR, "FOOD_OUT_OF_TEMP" VARCHAR, "WRITTEN_PLAN_FILES" VARCHAR, "EMPLOYEE_KNOWLEDGE" VARCHAR, "TIME_KEEPING_METHODS" VARCHAR, "HACCP_METHODS" VARCHAR, "CALIBRATION" VARCHAR, "COOKING_TEMP" VARCHAR, "EQUIP_CONDITION" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "PROTECTION_FROM_CONTAMINATION" ("FOOD_ADULTERATION" VARCHAR, "FOOD_SPOILAGE" VARCHAR, "CONTAMINATION" VARCHAR, "FOOD_STORAGE" VARCHAR, "REFRIGRATORS" VARCHAR, "FREEZER" VARCHAR, "FIFO" VARCHAR, "DRY" VARCHAR, "DISHWASHING_CHEMICALS" VARCHAR, "CLEANING" VARCHAR, "SANITIZER" VARCHAR, "SUPPLY_EQUIPMENT" VARCHAR, "PESTICIDES" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR, "CUSTOMER_ID" INTEGER) CREATE TABLE "PHYSICAL_FACILITIES_2" ("CUSTOMER_ID" VARCHAR, "CEILING" VARCHAR, "WINDOWS" VARCHAR, "SPOILS_STORAGE" VARCHAR, "DOORS" VARCHAR, "PERSONAL_LOCKERS" VARCHAR, "FLOORS" VARCHAR, "CONDITION" VARCHAR, "HANDICAP" VARCHAR, "SELF_CLOSING_ROOM" VARCHAR, "TOILETS" VARCHAR, "TOILET_PAPER" VARCHAR, "TOILET_CONDITION" VARCHAR, "VENTILATION_CONDITION" VARCHAR, "MENS" VARCHAR, "MEN'S_VENTILATION" VARCHAR, "MEN'S_FLOOR_DRAWN" VARCHAR, "MEN'S_TOILET_STALLS" VARCHAR, "MEN'S_HAND_SINK" VARCHAR, "MEN'S_TOWELS" VARCHAR, "WOMEN'S" VARCHAR, "WOMEN'S_VENTILATION" VARCHAR, "WOMEN'S_FLOOR_DRAWN" VARCHAR, "WOMEN'S_TOILET_STALLS" VARCHAR, "WOMEN'S_HAND_SINK" VARCHAR, "WOMEN'S_TOWELS" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "PHYSICAL_FACILITIES_1" ("CUSTOMER_ID" VARCHAR, "LIGHTNING" VARCHAR, "KITCHEN" VARCHAR, "STORAGE" VARCHAR, "REFRIGRATION" VARCHAR, "JANITORIAL" VARCHAR, "INTERIOR" VARCHAR, "FIXTURE" VARCHAR, "FOOTCANDLES_1" VARCHAR, "FOOTCANDLES_2" VARCHAR, "FOOTCANDLES_3" VARCHAR, "FOOTCANDLES_4" VARCHAR, "FOOTCANDLES_5" VARCHAR, "EXTERIOR" VARCHAR, "WINDOWS" VARCHAR, "GLASS" VARCHAR, "SCREEN" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "PEST_CONTROL" ("CUSTOMER_ID" VARCHAR, "WALL/CEILING_PIPES" VARCHAR, "SANITATION" VARCHAR, "DOORS" VARCHAR, "SELF_CLOSING" VARCHAR, "RODENT_PROOF" VARCHAR, "VERMIN_PROOFING" VARCHAR, "FOUNDATION" VARCHAR, "ATTIC_VENTS" VARCHAR, "WINDOWS" VARCHAR, "TYPE_SCREENS" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "GENERAL_FOOD_SAFETY_REQ" ("CUSTOMER_ID" VARCHAR, "APPROVED_METHODS" VARCHAR, "DEFROST" VARCHAR, "FROZEN_FOOD" VARCHAR, "FOOD_WASHING" VARCHAR, "PRODUCE_1" VARCHAR, "FRUITS" VARCHAR, "GRAINS" VARCHAR, "VEGETABLES" VARCHAR, "SEPERATE_FROM_CONT" VARCHAR, "RAW" VARCHAR, "PRODUCE_2" VARCHAR, "STORED_BULK" VARCHAR, "STORAGE" VARCHAR, "FIFO" VARCHAR, "REFRIGRATAION" VARCHAR, "STORAGE_TEMP" VARCHAR, "HUMIDITY" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "FOOD_SAFETY_CERTIFICATION" ("CUSTOMER_ID" INTEGER,"OWNER" VARCHAR,"MANAGER" VARCHAR,"EMPLOYEE" VARCHAR,"NAME1" VARCHAR,"NAT'L_REGISTRY1" VARCHAR,"PROMETRIC1" VARCHAR,"SERVESAFE1" VARCHAR,"EXPIRATION1" VARCHAR,"NAME2" VARCHAR,"NAT'L_REGISTRY2" VARCHAR,"PROMETRIC2" VARCHAR,"SERVESAFE2" VARCHAR,"EXPIRATION2" VARCHAR,"COMMENTS" VARCHAR,"FOOD_TEMP" VARCHAR,"DISHWASHER" VARCHAR,"DANGER_ZONE" VARCHAR,"COOLING_FOODS" VARCHAR,"THAWING" VARCHAR,"REHEATING" VARCHAR,"THERMOMETERS" VARCHAR,"FIFO" VARCHAR,"HANDWASH" VARCHAR,"COOKING_TEMP" VARCHAR,"FOOD_POISONING_TYPES" VARCHAR,"EVEDENCE_PHOTOS" VARCHAR) CREATE TABLE "FOOD_FROM_APPROVED_SOURCES" ("CUSTOMER_ID" VARCHAR, "RECEIPTS" VARCHAR, "DELIVERY_DOOR" VARCHAR, "AIR_CURTAIN" VARCHAR, "VELOCITY" VARCHAR, "OFF_LOAD" VARCHAR, "INSPECTS" VARCHAR, "RODENTS" VARCHAR, "WARNING" VARCHAR, "SHELL_FISH" VARCHAR, "GULF_OYSTER" VARCHAR, "FOOD_OUT_OF_TEMP" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTO" VARCHAR) CREATE TABLE "FOOD_FACILITY_SITE_FACTS" ("CUSTOMER_ID" INTEGER PRIMARY KEY AUTOINCREMENT NOT NULL UNIQUE,"DBA" VARCHAR,"DISTRICT" VARCHAR,"CITY" VARCHAR,"ZIPCODE" VARCHAR,"ADDRESS" VARCHAR,"SEAT_NO" VARCHAR,"PHONE_NO" VARCHAR,"OWNER" VARCHAR,"PERSON_IN_CHARGE" VARCHAR,"WEBSITE" VARCHAR,"EMAIL" VARCHAR,"FACILITY_TYPE" VARCHAR,"SQ_FOOTAGE" VARCHAR,"NO_OF_SEATS" VARCHAR,"ALCOHOL_SALES" VARCHAR,"LTD_PREP" VARCHAR,"BUSINESS_LICENCE_NO" VARCHAR,"EXPIRATION" VARCHAR,"COMMENTS" VARCHAR,"EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "FOOD_DISPLAY_SELF_SERVICE" ("CUSTOMER_ID" VARCHAR, "SELF_SERVICE" VARCHAR, "LIDS" VARCHAR, "UTENSILS" VARCHAR, "HOW_OFTEN_CHANGED" VARCHAR, "SCOOP" VARCHAR, "SNEEZ_GUARD" VARCHAR, "DISHES" VARCHAR, "CROSS" VARCHAR, "SENITATION" VARCHAR, "MAINTANANCE" VARCHAR, "MECHANICAL_CONDITION" VARCHAR, "SERVICE_OF_UTENSIL" VARCHAR, "TIME" VARCHAR, "PRPER_FOOD_LABELING" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "EQUIPMENT/UTENSILS/LINES" ("CUSTOMER_ID" VARCHAR, "STORED_DISHES" VARCHAR, "CUPS" VARCHAR, "DAMAGED_DISHES" VARCHAR, "UTENSILS" VARCHAR, "LINES" VARCHAR, "COOLING_EQUIPMENT" VARCHAR, "COOK_WARE_STORAGE" VARCHAR, "CONDITION" VARCHAR, "STORAGE_LOCATION" VARCHAR, "NAPKINS" VARCHAR, "SANITATION" VARCHAR, "ADEQUATE_CAPACITY" VARCHAR, "HAZARDS" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "EMPLOYEE_HEALTH_AND_HYGENE" ("CSTOMER_ID" INTEGER, "COMUNICABLE_DIESEASE" VARCHAR, "WIPING_BAGS" VARCHAR, "DISCHARGE" VARCHAR, "LOCKERS" VARCHAR, "PROPER_HAND_WASH" VARCHAR, "RESTROOM_CONDITION" VARCHAR, "HANDWASH_STATION" VARCHAR, "HAIR_RESTRAINT" VARCHAR, "GLOVES_USED" VARCHAR, "WOUND_CARE" VARCHAR, "FOOD_SAMPLE_TESTING" VARCHAR, "GARMENT_CONDITION" VARCHAR, "HEALTH" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "DISH&WARE_WASHING" ("CUSTOMER_ID" INTEGER, "TYPE_OF_COMPARTMENT_SINK" VARCHAR, "PLUMBING_ISSUE1" VARCHAR, "QUATERNARY_AMMONIA" VARCHAR, "IODINE" VARCHAR, "HOT_WTR_SANIT_TEMP" VARCHAR, "PLUMBING_ISSUE2" VARCHAR, "HOT_WATER" VARCHAR, "TEMP" VARCHAR, "DISHWASHER_TYPE" VARCHAR, "WAQLL_CONDITION" VARCHAR, "SANITIZER_LEVELS" VARCHAR, "CHLORINE" VARCHAR, "SINK_OR_DISHWASHER" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR) CREATE TABLE "CORRECTIVE_ACTIONS" ("CUSTOMER_ID" VARCHAR, "CORRECTIVE_ACTIONS" VARCHAR) CREATE TABLE "CONSUMER_ADVISORY" ("CUSTOMER_ID" VARCHAR, "TRUTH_IN_MENU" VARCHAR, "MAJOR_CHAIN" VARCHAR, "TRANS_FAT" VARCHAR, "SCHOOL" VARCHAR, "PROHIBITED" VARCHAR, "CALORIES" VARCHAR, "COMMENTS" VARCHAR, "EVEDINCE_PHOTOS" VARCHAR) CREATE TABLE "COMPLAINS&ENFORCEMENTS" ("CUSTOMER_ID" VARCHAR, "PLAN_SUBMITTED" VARCHAR, "APPROVEL" VARCHAR, "CERTIFICATE_OF_OCCU" VARCHAR, "PRIOR_INSPEK_REPORT" VARCHAR, "LAST_INSPECTION_DATE" VARCHAR, "PERMIT_STATUS" VARCHAR, "POSTED" VARCHAR, "EXPIRATION" VARCHAR, "PERMIT_DISPLAYED" VARCHAR, "INSPECTION_REPORT_POSTING" VARCHAR, "COMMENTS" VARCHAR, "EVIDENCE_PHOTOS" VARCHAR)

    Read the article

  • Drive Shows No Files But Half Space Gone

    - by Chance Robertson
    I have a 500 GB USB drive. When I go to Windows Explorer or Finder, the drive shows that about half the drive is free. However, when I open either drive in Windows 7 or OS X, no files how up. I have tried to look at the files through the command line and nothing shows. A while back, I hooked it up to my MacBookPro and there was a quick message that said the drive was not ejected properly, blah, blah. And of course I did not read the message and hit OK. It there any way to get back my files from the drive?

    Read the article

  • NVRAM for journals on Linux?

    - by symcbean
    I've been thinking about ways of speeding up disk I/O, and one of the bottlenecks I keep coming back to is the journal. There's an obvious benefit to using an SSD for the journal - over and above just write caching unless of course I just disable the journal with the write cache (after all devicemapper doesn't seem to support barriers). In order to get the benefits from using a BB write cache on the controller, then I'd need to disable journalling - but then the OS should try to fsck the system after an outage. Of course if the OS knows what's in the batter-backed memory then it could use it as the journal - but that means it must be exposed as a block device and only be under the control of the operating system. However I've not been able to find a suitable low-cost device (no, write-levelling for Flash is not adequate for a journal, at least one which uses Smartmedia). While there's no end of flash devices, disk/array controllers with BB write caches, so far I've not found anything which just gives me non-volatile memory addressable as a block storage device.

    Read the article

  • How to backup and restore ESXi 4 settings?

    - by Arek
    How can I backup all settings of free VMWare ESXi 4? I configured the host - VMs, Storage, Networking, Resource Allocation and all other settings available in vSphere Client. It consumed quite a lot of time, but works pretty well. Now I want to backup all the settings "just in case" to easily reinstall ESXi 4 if something goes really wrong. I don't ask "how to backup VMs" (so please don't point me to Ghetto-VCB script). I need to backup and restore just ESXi4 host's settings.

    Read the article

  • Disk image of a Windows 2000 NTFS hard drive

    - by Federico
    Hi, I need to create a disk image from a Windows 2000, NTFS formatted, hard drive. This image has to be used to create backup hard drives to replace the original disk in case an emergency situation arises. This is a medical equipment, so I cannot physically disconnect the disk because I would violate the warranty of the equipment. This machine has a DVD R/W, ethernet and USB 2.0 access, and we have the rights to install any application I want in the Windows 2000 system. 1) Is there any way to do this without installing any new software in the Windows 2000 system, so it is the least invasive as possible? 2) If we have to install a software to do the backup, which software do you recommend? Any hint will be greatly appreciated. Thanks in advance, Federico

    Read the article

  • Set up DPM to use hardware VSS Provider with EMC Clariion SAN

    - by Ryan
    We recently purchased an EMC Clariion AX4 SAN and we're using it to provide storage for our Hyper-V virtual machines. I've already got the servers registered with it and configured the failover cluster CSV's, etc. I'm wanting to figure out what I have to do to set up the VSS Provider for the SAN, so that Microsoft Data Protection Manager can use it to backup the virtual machines. I'm new when it comes to Clariion SAN's, so I have no idea how to set up the VSS provider. I downloaded something from Powerlink that was labeled VSS Provider and installed it on one of the machines connected to the SAN. It had something to do with a Solutions Enabler (I don't know what that is), but it doesn't really seem like it did anything. I read something that suggested I'd need to have Navisphere Manager to use the VSS Provider on the AX4, but we didn't purchase that - we're just using Navisphere Express. Can anyone help me figure out how to get the VSS Provider up and running?

    Read the article

  • Using the same VPC image on multiple workstations

    - by justSteve
    I haven't used an VMs before so brand new to the party. I'm running Win7 off an honest to goodness MSDN license so OS licensing is not an issue. I'd like to think that I could create a VPC image on a USB/eSATA hard drive and move that drive from one Win7-based workstation/laptop to another and I'd have the same services/desktop/computing environment at all of them. I'm a developer working against the IIS7/SQL08 stack with VS10 so i'm working with apps and services as deeply embedded with the OS as you can get. Should I expect to be able to pull this off? thx

    Read the article

  • How can I get a data usage/access log for an external hard-drive?

    - by Vittorio Vittori
    Hello, I'm working in an office with many people and sometimes I leave my external hard drive with my personal data inside. I would to know if there is some way to see if my hard disk was used during my absence. I'm not the computer administrator, so I can't use exclusive file permissions and I would really like to know hard disk is opened from another computer. I am using a Mac. Does exist some other way to protect personal data on usb device like an hard-drive? If yes can you write some link to possible guides? I hope there is some ploy!!

    Read the article

  • Checking for orphaned snapshots - ESXi5

    - by Tim Alexander
    So we had some issues with our passive mail node over the weekend doing vmtools updates and to resolve a problem we had to revert to a snapshot and then reseed all the databases across. All in all everything seemed fine, the server works and CCR copy status is running fine. I used the "Delete All" option this morning to remove the snapshot and the process according to vCenter has completed with no errors and no "Needs Consolidation" flag. This all seems fine until I check the Datastore that holds the VM on our SAN and I can clearly see snapshots that are pretty big [see attached image]. These do not seem to be changing size and the data modified is around the time the works were started for the vmtools update. Does this possibly mean that at some stage, possibly during reversion or hard resetting of the VM, that they have become orphaned? Are there any methods to check orphaned status of snapshots? We are running ESXi5.0 Update 1 with storage provide by an EMC SAN. Enterprise plus is the license level.

    Read the article

  • What can I do with .chk files in FOUND.000 folders?

    - by Svish
    Just discovered I have gotten a FOUND.000 folder on my usb drive. I guess from running chkdsk once. It has three files in it: FILE0000.CHK FILE0001.CHK FILE0002.CHK What exactly can I do with these files? What are my options? Are they lost files? Are they garbage? Can I use them for anything at all? Or will I just have to delete them?

    Read the article

  • Can I use the voice & SMS features of my GSM SIM through my laptop?

    - by i..
    My laptop (a Lenovo T410s) has an internal GSM modem (device manager calls it a Qualcomm Gobi 2000 HS-USB Modem 9205) that I'm currently using a regular (voice, data, text, etc) 3G SIM in. The data functionality works great through the Lenovo software & Windows 7 but I was wondering if I can use the other features (specifically voice & SMS) through Windows. Is it posisble to use the non-data features of my 3G SIM through my Qualcomm GSM modem? If so, what software is available to this end? If not, where is the restriction? (e.g. hardware, OS, driver, software) Thanks!

    Read the article

  • What's the best way to mitigate NFS and sudo?

    - by user225874
    Quick background: We have 40 workstations running Linux. NFS is used extensively for bulk data storage and home directories. This allows users to roam freely will relatively transparent file systems. This is an educational environment where postdocs and students have successfully pulled off a coup of sorts. All have gained root on their individual workstations by grooming a technophobic PI who thinks IT people are evil. If I so much as suggest chroot or sudo restrictions, I'll find myself working out of a broom closet. With that in mind, what's the best way to mitigate something like this below? $ hostname workstation1 $ whoami john $ sudo su jane $ whoami jane $ cp -R /home/nfs/jane /mnt/thumbdrive/

    Read the article

  • Using PC or Mac keyboard as Bluetooth keyboard for iPad?

    - by Kevin Hakanson
    I would like to use my computer keyboard (USB) as a Bluetooth keyboard for my iPad, while I am using it with my computer. I was hoping their was an "app for that" that I could run on either Mac or Windows. I imagine how it would work: It would have to emulate a Bluetooth keyboard, and be able to pair with the iPad. Then, when you give focus to this app, it transmits keystrokes from your built-in keyboard out over the Bluetooth connection. Seems simple, but I can't seem to find anything definitive on Google. Has anybody done this? I figure this is cheaper that buying a Apple iPad Keyboard Dock or a Apple Wireless Keyboard from the Apple Store. Also, it's one less item on my desk, which gets cluttered enough with one keyboard.

    Read the article

  • MySQL keeps crashing OS server.. Please help adjust my.ini!

    - by TruMan1
    I have MySQL 5.0 installed on a Windows 2008 machine (3GB RAM). My server crashes on a regular basis (almost once a day) with this error: Changed limits: max_open_files: 2048 max_connections: 800 table_cache: 619 I did not use the heavy InnoDB .ini file, although I am rethinking that I should have? I am worried that big configuration changes will make my current sites stop working. What should I do? Here is my current ini settings: default-character-set=latin1 default-storage-engine=INNODB max_connections=800 query_cache_size=84M table_cache=1520 tmp_table_size=30M thread_cache_size=38 myisam_max_sort_file_size=100G myisam_sort_buffer_size=30M key_buffer_size=129M read_buffer_size=64K read_rnd_buffer_size=256K sort_buffer_size=256K innodb_additional_mem_pool_size=6M innodb_flush_log_at_trx_commit=1 innodb_log_buffer_size=3M innodb_buffer_pool_size=250M innodb_log_file_size=50M innodb_thread_concurrency=10

    Read the article

  • Is it possible create a 4TB bootable partition in the x86 edition of Windows Server 2003 Enterprise?

    - by Giffyguy
    I'd like to find out if there is any way to accomplish this, since it would benifit my storage server greatly. I am using a Promise FastTrak 8660 and five Seagate ST31000340NS 1TB drives in a RAID 5 array. I figure that if the x86 ENTERPRISE edition of Server 2003 can handle 64GB of RAM, it should have no problem supporting larger HDD volumes as well. I've read (somewhere...) that the Windows Server operating systems are not limited to the standard 2TB like Windows XP and 2000 are. I'm hoping it's something that just needs to be turned on, similar to the way PAE works for the 4GB RAM limit in x86 servers.

    Read the article

  • Decompressing Files on an NTFS Volume from Linux

    - by amphetamachine
    I recently did something stupid on my dual-boot laptop, where I compressed the entire volume to make room for a Linux partition. For some reason, Windows let me compress C:\ntldr. Now I need to get it uncompressed in order for Windows to boot. Here are some of the operating restrictions I have: I do not have access to the BIOS. I cannot boot from CD/USB/floppy. (I installed Linux through PXE) It does not have network access. Is there were some way to specify that the ntfs-3g driver shouldn't compress files even if it thinks it should (if the directory is compressed) when mounting the volume? Or, is there a way to modify the attributes of a directory using ntfstools?

    Read the article

  • Can't initialize drive in Windows 7

    - by Abe
    I have a 2.5" laptop harddrive that I plugged into my laptop through a SATA to USB cable. It's powered by an adapter to a normal wall-plug. I want to use it as an external harddrive. It wouldn't initialize (Device is not ready), so as suggested in some instructions I found I uninstalled the drivers, unplugged it and plugged it back in. That worked, and I initialized the drive and formatted it. However I unplugged it after that and a few days later the same strategy does not work and I can't figure out how to use the drive. I can't initialize it and it doesn't show up in my computer.

    Read the article

  • Free MPEG cutting/cropping/editing tool

    - by Stijn Sanders
    I'm looking for a free tool to cut MPEG's that are created by recording from a USB cable receiver. There are a number of applications that do this, and some are free, but most of them take the video and audio decoded and pass them into a codec again to write the final output. I already have the MPEG's encoded the way I like, so what I need is a tool that can strip the beginning and the ending of the recording before and optionally commercial breaks, by rearranging the data within the file, not re-encoding it. Now I'm using some old software that came with the cable-receiver, but this actually re-encodes the video when exporting. I've tried VirtualDub but had major trouble getting the audio and video streams to stay in sync (and this was also re-encoding)... I found this which comes pretty close, but doesn't allow much accuracy in selecting cut positions.

    Read the article

  • Ubuntu 9.10: switch in KVM, mouse is detected but not usable immediately

    - by CarlF
    I use a KVM switch to jump between my tower and laptop, both placed on my desk. With Ubuntu 9.04 this worked perfectly. In 9.10, when I switch to the tower, then back to the laptop, the mouse is detected (as shown by /var/log/messages) but moving it has no effect. If I use Ctrl-Alt-F1 to switch to the TTY, then Alt-F7 back to Xorg, the mouse starts working. The tower is running Windows 7, but that shouldn't matter. Sometimes, but not other times, the USB keyboard on the KVM switch is also not usable and I have to use the laptop's built-in keyboard to switch to the TTY. The laptop has two monitors, the built-in and an external. It's (obviously) the external panel that is attached via the KVM switch. Any suggestions? Report to Canonical as a bug?

    Read the article

< Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319  | Next Page >