Search Results

Search found 9748 results on 390 pages for 'virt manager'.

Page 312/390 | < Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319  | Next Page >

• Ubuntu 12.04 on VMware Player loses network configuration

  - by d4ryl3

  I've been having this issue for 2 weeks now with my VMware Player-hosted Ubuntu 12.04. I only use it for my LAMP stack. I've had no issues with it before until about 2 weeks ago when it almost always (once per day at least) loses its network configuration. On boot it shows: Waiting for network configuration... Waiting up to 60 more seconds for network configuration... Booting system without full network configuration... Then when I do ifconfig -a it doesn't show an IP Address and couldn't get online. The only resolutions I've found so far was either to reinstall VMware Tools or use the VMware Player installer and choose Repair. This is frustrating to me because even when the issue was resolved after doing either of the steps I mentioned, the IP Address gets changed. Then I'd have to update the Remote Configuration of my IDE (Netbeans) and my database manager. What could possible cause this? Please help. Thank you. Additional details: I'm using a laptop with Windows 7 and connected to the office WiFi, which is unrestricted as far as I know. Thanks again.

  Read the article

• Video card not detected on Lenovo T410 in Linux

  - by wich

  I have a T410 with an nVidia NVS 3100M, this is not a hybrid system, there is no Optimus. (No option in the BIOS for Optimus, lspci in linux as well as the Windows device manager only show the nVidia) Using lspci I see the GPU as a present device, however, I can not, for the life of me, get any video driver to work that will let me start an X session, every time X craps out with the error (EE) No devices detected. I have tried the nVidia binary blob, (with nvidia-config, made sure no nvidia support in the kernel), I have tried nouveau, I have tried nv, I have even tried generic vesa, nothing will work. When I compare the dmesg that I get when loading the nvidia kernel module, I see that it is missing some lines compared with another system that also has an nvidia card, specifically the line mentioning the GPU name (3100M) is not there. I have checked every option in the BIOS, there is nothing to control except for the BIOS video output port, which is set to the LCD panel. I have no idea anymore what the problem may be, or even how I can diagnose this problem further. Any help will be appreciated.

  Read the article

• run as dialog always pops up

  - by user12006

  I recently got some malware on a machine that I don't use for much (partly intentional). I've cleaned it, but now everytime I open any .exe the 'Run As' dialog pops up asking me which user I want to use to run the program. What causes this, and what's the fix for it? edit My process to remove the malware was as such: Disconnected from the network Deleted DisableTaskMgr reg key Inspected with Process Explorer and Task Manager and noticed that all applications were being run within another executable located in Documents and Settings...\Temp\Some.exe The system tray application was also in Documents and Settings...\Temp\SomeOther.exe I suspected that a service was in place as the system tray application would restart if it was killed, but couldn't find any service that I didn't recognize. Removed permissions from Some.exe and SomeOther.exe (on those files only) Restarted and deleted Some.exe and SomeOther.exe Deleted startup entries that were created Ran AVG Free and Windows Defender to remove anything else (they would be killed immediately before the two .exe's were removed) Cleaned registry via CCleaner note that system restores would finish saying something to the effect of 'couldn't restore system: there were no changes made'. I attempted to restore to a week ago, and I only got the malware yesterday.

  Read the article

• Google Chrome does not launch after some months without using it in Windows XP/Seven

  - by kokbira

  Well, I have in computers I use with Windows XP or Seven more than one browser installed on them, generally Internet Explorer 8, Firefox 4, Opera 11 and Google Chrome. I often use Firefox, but I want to use Google Chrome sometimes because I have a lot of addons and webapps on it. The issue is: when I try to execute Chrome after some months without using it, it does not function. Using Proccess Explorer or Task Manager, I can see that there is not any Google proccesses running. Then I reinstall it and all functions. But if I do not use it for some months again, it will not function... Is it an update problem? Must I use Chrome everyday or is there another way to avoid that issue? PS: I installed English and Portuguese last versions (how to get the version numbers when it does not execute?), not at the same time, and it continues to do not launch... PS2: There is a running Google Update proccess that is launched in startup: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run    Name:            Google Update    Type:            REG_SZ    Data:            "C:\Users\Ubirajara\AppData\Local\Google\Update\GoogleUpdate.exe" /c

  Read the article

• Windows Remote Desktop (RDP/MSTSC) fails with Error Code: 5

  - by BryCoBat

  I have 2 Windows XP boxen: A (running XP SP3) and B (running XP SP2). I'm using Remote Desktop to connect from A to B. When I connect, I get the login screen (which is slow to respond to keyboard/mouse input), and after logging in, I get the following: Fatal Error (Error Code: 5) Your Remote Desktop session is about to end. This computer might be low on virtual memory. Close your other programs, and then try connecting to the remote computer again. If the problem continues, contact your network administrator or technical support. I've seen one way to (sometimes) get in by opening a second RDP session to the same box [1], and if I wait long enough sometimes it will go ahead and log in anyway. Is there something broken/missing on the PC I'm trying to remote in to? Edited in reply to djangofan: There's nobody listed under "Lock pages in memory". When the double login trick works, a glance at Task Manager shows plenty of free memory, 800MB available out of 1.5 GB. (Performance tab, Physical memory) For what it's worth, this happens consistently after a reboot. What sort of exact info would be useful? There's very little remaining installed on that machine that's not Windows + Office... [1] found at http://www.fdcservers.net/vbulletin/archive/index.php/t-1580.html

  Read the article

• Can't connect to Sql Server 2008 named instance

  - by eidylon

  I just installed Sql 2008 Express on a new server running Windows Server 2008. I know Sql is working properly, because I can connect to the db fine locally, on the server. I cannot connect to it from a client machine though, neither by IP address nor by machine name (iporname\instance). I know I have the correct IP address, because I am RDCing into the server to perform all this configuration and setup, and if I ping the server name, it is resolving to the correct IP address as well. On the server, I have set up an inbound firewall exception allowing all traffic on any port on any protocol to sqlservr.exe. In SSMS, in server > Properties > Connections Allow remote connections to this server is enabled. In Sql Server Configuration Manager, TCP/IP is enabled in both the Protocols for <instance> and the Client Protocols sections. I looked in the Windows logs, but don't see anything about connections being denied or dropped. As far as I can see, I have everything set right, but cannot connect from a client machine. The client CAN connect to other Sql 2008 Express servers okay, so I know the client configuration is correct. Any ideas where else I can look for info of what/where/how this connection is dropping, greatly apprecaited! The error being returned by the client is: **TITLE: Connect to Server** Cannot connect to [MY.IP.ADD.RSS]\[MYINSTNAME]. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)

  Read the article

• Blank desktop when logging into a Virtualized Windows 2008 Terminal Server?

  - by Rachel

  We have a Virtualized Terminal Server running Windows Server 2008. When the admin user logs in, everything is fine. When anyone else logs in, their desktop and start menu is blank (they have the taskbar, start button, and quick launch links though). If I go into Windows Explorer, I can see icons in their desktop folder (although the icon image is missing and it is just displaying the generic icon), but can't run any of them. If I login with a user that is part of the Administrator group in Active directory, I get the same behavior except I can launch the programs found in the Desktop Folder of Windows Explorer. I cannot drag these items out onto the desktop though - The cursor doesn't allow me to drop them. From Task Manager I can see that explorer.exe and dwm.exe are both running. The Authenticated Users and Interactive groups are both under the Users group, along with our network's Domain Users group. Does anyone know why this is happening and how I can fix it? Also, not sure if it's related but about 1 in every 3 logins just hangs at a completely blank blue screen (no start button, taskbar, or quick launch buttons) and needs to be disconnected / reset by an admin. Edit I just noticed that the desktop itself doesn't even respond to click events. It's almost like the entire desktop is missing. At first I thought it didn't respond to right-click events because of an AD policy, but then I noticed if you open the Start Menu and click the desktop, the start menu doesn't shut like it should

  Read the article

• what's the difference between a Volume and a Partition in Windows 7 diskpart

  - by user170232

  I was trying to follow the Intel guide for setting up iRST (Intel Rapid Start Technology) on my new laptop. The Intel manual says you need to create a *Volume that is as big or bigger than your available memory, set it to a specific id (id=84), then go into the iRST tool and adjust some settings. Looking at the disk manager on the laptop, I see there is already a Partition labeled as "Hibernation Partition" which is a little bigger than the memory in my system. So it looks like iRST was already set up...BUT, it's a Partition, not a Volume. Here's what the manual says to do: (from: http://download.intel.com/support/motherboards/desktop/sb/rapid_start_technology_user_guide.pdf) diskpart list disk select disk x (where x is the disk to use, there's only one disk in this laptop) create partition primary size=X000 (where X000 is the size to create) detail disk (which lists details for the disk. This is where i get hung up) select volume Z (where Z is the *partition you created previously) ** it says the 'detail disk' command will list the volume #, but it doesn't. ** 'detail disk' only lists two "volumes" for Recovery and OS. ** if i do 'list partition', i see the 8 GB *partition labeled as "Hibernation Partition") ** so I can't continue with the following steps: set id=84 override exit The reason I went looking for the manual is because when iRST is enabled in the BIOS, the system won't resume from sleep. When it's disabled, it works fine, but the system goes into (legacy?) Hibernation mode and takes a while to come out of Hibernation. the iRST is supposed to resume from deep sleep very quickly. So, what's the difference between a Volume and a Partition? Should I delete the Hibernation Partition and create a Hibernation Volume? Anyone have any ideas? (if it matters, this is on a Dell XPS 13 with BIOS A08) Thanks! J

  Read the article

• Installed Paragon HFS+ for Windows 8, now my pc won't recognize the external firewire drive

  - by Steve

  I'm not incredibly knowledgeable about computers and I really need some help. Just got a Seagate external firewire drive this morning. I downloaded the necessary pc driver (Paragon HFS+ for Windows 8) through their website per the instructions that came with the drive. After installation, I restarted and the pc recognized the firewire drive just fine. About three hours into copying files from my pc to the firewire drive, it gave me an error and told me the files couldn't be copied. When I clicked to get out of the message, the computer crashed. After an hour of it trying to repair itself in safe mode, it restored me to an earlier version before the system crashed. Here's my current dilemma: The Paragon HFS+ is still showing up in my programs as installed, but the Device Manager is not recognizing the drive. When I try to uninstall and reinstall Paragon, it interrupts me with a message saying "The setup must update files or services that cannot be updated while the system is running" and basically gives me the finger. I have no idea what to do now, as it won't let me uninstall and reinstall Paragon, and I have no idea why it crashed my computer in the first place. Is there possibly another Mac - PC firewire driver I can try downloading instead? I really don't know what I'm doing and any help would be greatly appreciated.

  Read the article

• Trying to backup system state on server 2003 sp2, getting "Faulting application vssvc.exe - system state backup failed" in applciation log

  - by IT_Fixr

  Trying to backup system state on Windows Server 2003 (SP2), getting "Faulting application vssvc.exe - system state backup failed" in application log. Volume shadow copy creation: Attempt 1. "MSDEWriter" has reported an error 0x800423f2. This is part of System State. The volume shadow copy operation can be retried. "Event Log Writer" has reported an error 0x800423f2. This is part of System State. The volume shadow copy operation can be retried. "Registry Writer" has reported an error 0x800423f2. This is part of System State. The volume shadow copy operation can be retried. "COM+ REGDB Writer" has reported an error 0x800423f2. This is part of System State. The volume shadow copy operation can be retried. "Removable Storage Manager" has reported an error 0x0. This is part of System State. The backup cannot continue. Error returned while creating the volume shadow copy:800423f2 Aborting Backup.

  Read the article

• Xvnc4 started from xinetd only displays empty gray X screen

  - by Scott Thomason

  Hi. I'm attempting to setup an Ubuntu 10.10 box so that anyone can connect to port 5900 and be greeted by the gdm login manager. To do so, I added a vnc entry in /etc/services and I am starting Xvnc4 using this xinetd config file: service vnc { protocol = tcp socket_type = stream wait = no user = nobody server = /usr/bin/Xvnc server_args = -geometry 1000x700 -depth 24 -broadcast -inetd -once -securitytypes None } This kind of works...I can start multiple sessions all to port 5900, and I get an X screen. The problem is that I only get an empty, gray X screen with no applications started. I know when you run vncserver from the command line it will look to your ~/.vnc/ directory for your passwd and xstartup files, and I think what I want to do is put "gnome-session" into the xstart file. However, which xstartup file? The running user is "nobody" who obviously doesn't have a ~/.vnc/ directory. I tried a /root/.vnc/xstartup file and a ~scott/.vnc/xstartup file and it doesn't look like they were even read. I changed the xinetd vnc service so that it would "strace" Xvnc4. I looked thru all the "open" lines and didn't get a clue as to what file it was trying to read for xstart. Can anyone help? I just want a terminal server where the user is presented with a gdm login screen.

  Read the article

• Display stretches 4:3 ratios; Adds scrolling to other ratios

  - by Matt

  I have a dual monitor setup. Normally, they both display at 1680x1050. They have been setup this way for about a year. I'm using Windows XP Professional 2003 x64 SP2. Today, out of nowhere, one of the monitors kicked back to a lower resolution. I was not playing with any configuration at the time.. in fact all I had done was close a window (maybe a browser). But the thing is that the resolution is still preserved partially by the fact that the screen will scroll when you move the mouse. So it's like looking through a 1024x768 window into a 1680x1050 world. The monitor itself does not appear to be damaged, because I also have it connected to my netbook (via KVM) and higher resolutions work fine. I tried uninstalling/reinstalling the drivers to no avail. System restore doesn't help either. I'm unsure of the exact ATI card I'm using.. Device Manager lists it as "Radeon X300/X550/X1050". There is no Catalyst Control Center software installed. I tried to install it, but there doesn't seem to be a way to install it by itself ... it forces you to install another driver, which breaks both of my displays, forcing me to go into safe mode and run system restore again. Any ideas? Thanks EDIT: After playing around more, I discovered that the "scrolling" behavior is only present for aspect ratios that are not 4:3. For 4:3 ratios, it just stretches out to fit the wide screen. My monitor's native ratio is 16:9 .. what could be causing it to think it needs to scroll?

  Read the article

• Does Hyper-V support SCSI Pass-through discs in a Server 2003 R2 VM?

  - by Peter Bernier

  I'm running into some difficulties getting pass-through disks to be accessible to a Hyper-v server 2003 r2 virtual machine. Host OS : Server 2008 R2 full w/Hyper-V role Guest OS : Server 2003 R2 (Windows Home Server) The guest's OS disk is a pass-through disk on the IDE controller (not the best solution, but I can live with it). My storage disks will be pass-through disks on the SCSI controller. I'm able to see all of the disks that I'll be using for the VM on the host without issue. The problem that I'm having is that I can't seem to get the guest OS to be able to 'see' the storage drives (as pass-through disks on the SCSI controller). Here's what I'm doing : On the host, the storage drive is set to 'Offline' just like the OS disk (this is required for pass-through to work). In the VM, the storage drive is on the SCSI controller. Hyper-V Integration Tools are installed in guest. That's as far as I'm able to get. I don't see the drive in Computer Management, or in Windows Explorer (I've tried with an unformatted disk, as well as after formatting a partition). I am able to see a removable device that lists the disk's model number in the Guest, but I can't seem to access the storage. (I get an entry in Device Manager that needs drivers, but nothing on the Integration Tools disc works..) Trouble-shooting steps I've tried : If put the pass-through drive on the IDE controller, I can see it in the Guest. If put the storage drive 'Online' in the host and create a VHD on it on the SCSI controller, I can see it in the Guest. I suppose I could create a fixed-size VHD that consumes the entire disk, but I'd rather not have that overhead. I've also extracted the contents of the Integration Tools drivers (x86 and amd64) and tried pointing the disk controller to each of those, with no luck. Can anyone offer suggestions as to how I can get this to work properly?

  Read the article

• How to monitor process hogging CPU on a remote server

  - by sergeb

  I have a remotely hosted (virtual, VMware) dedicated server (Windows 2008 Server Web edition w/ SP1) that I can only connect to over Remote Desktop. Lately, a process hogs CPU for ~40 minutes most every day (at a random hour) and brings all web sites on the server down. While this is going on I also cannot connect using Remote Desktop to investigate on what is that process... Promptly after 40 min I can RD and the first thing I see on the Perf Monitor is that there was something topping the CPU at 100% and stops just before I'm able to RD... I'm aware of the beginning and end of this for I have monitors setup that email me up/down status of the web sites but I'm locked out while this is happening - can't RD to the server until it's over (and too late to see the Task Manager/Process Explorer picture). What is the best way/tool to setup on the server to continuously monitor all processes so when this happens I login and "replay" it to find the process causing this trouble? (I have no control over the virtual/VMware setup for it is hosted by a 3rd-party but I have most full control over my dedicated machine) Thanks in advance!

  Read the article

• Toshiba laptop cd drive read causes OS to totally freeze

  - by Fujishiro

  Okay I'll try to write an understandable summary. Forgive me if I'll fail with that attempt though. So. There is a Toshiba Satellite notebook. Got Windows 7 x86 Professional (OEM) installed on it, everything is fine (okay.. somewhat). The problem. If you put an audio or any kind of disc into the drive, something starts to eat the PC. Back then when the owner told me about this, he put an audio disc into the lappy. Winamp caused the IO load, 100%. Tried taskkill, taskkill /T, tried powershell, EVERYTHING. You just can NOT kill winamp or anything which becomes the blocker at that time. Even if you kill almost everything, laptop won't do a clear shutdown. Also I tried to use the force switch at 'shutdown' from cmd, but no use. (So: At these times you can use the laptop, but the blocker/explorer/disc becomes gray as a non-responding app. You can try to kill them, but that won't work, nor you can shutdown the machine). (Also tried using PID, but no use. For the highest IO I used the "select columns" from Task Manager and enabled the IO columns.) My first hunch was the problematic disc, autoplay and it tries to read tries to read (still shouldn't kill the PC). Disabled autoplay, removed winamp. Tried other software, etc. Everything was ok. Few days later the owner tried to put a disc into the machine and it started to reproduce the same symptoms but with a totally different disc. Uhm what to know. Virus is not an option, protected by BitDefender (valid license) and Spybot. Thanks if you have ANY idea about this strange problem. ps.: For now, the owner uses Daemon tools + Blindwrite as an alternative for those apps which wouldnt start without the disc.

  Read the article

• Ubuntu server PPTPD with OS X clients Problems

  - by Nakedsteve

  I'm trying to get a PPTP server running on a ubuntu server, but I've run into some issues with it. I followed this guide on how to set up pptpd on my server, and everything went smooth, but when I try to connect with my mac, it gives me this error: Here's my configuration: Does anyone have any idea as to what I'm doing wrong here? Update: Here's what the pptpd.log has to say about it: steve@debian:~$ sudo tail /var/log/pptpd.log sudo: unable to resolve host debian Sep 3 21:46:43 debian pptpd[2485]: MGR: Manager process started Sep 3 21:46:43 debian pptpd[2485]: MGR: Maximum of 11 connections available Sep 3 21:46:43 debian pptpd[2485]: MGR: Couldn't create host socket Sep 3 21:46:43 debian pptpd[2485]: createHostSocket: Address already in use Sep 3 21:46:56 debian pptpd[2486]: CTRL: Client 192.168.1.101 control connection started Sep 3 21:46:56 debian pptpd[2486]: CTRL: Starting call (launching pppd, opening GRE) Sep 3 21:46:56 debian pptpd[2486]: GRE: read(fd=6,buffer=204d0,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Sep 3 21:46:56 debian pptpd[2486]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Sep 3 21:46:56 debian pptpd[2486]: CTRL: Reaping child PPP[2487] Sep 3 21:46:56 debian pptpd[2486]: CTRL: Client 192.168.1.101 control connection finished My pptpd options are: asyncmap 0 noauth crtscts lock hide-password modem debug proxyarp lcp-echo-interval 30 lcp-echo-failure 4 nopix

  Read the article

• How to stop a ICMP attack?

  - by cumhur onat

  We are under a heavy icmp flood attack. Tcpdump shows the result below. Altough we have blocked ICMP with iptables tcpdump still prints icmp packets. I've also attached iptables configuration and "top" result. Is there any thing I can do to completely stop icmp packets? [root@server downloads]# tcpdump icmp -v -n -nn tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes 03:02:47.810957 IP (tos 0x0, ttl 49, id 16007, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 124, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.811559 IP (tos 0x0, ttl 49, id 16010, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 52, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.811922 IP (tos 0x0, ttl 49, id 16012, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 122, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.812485 IP (tos 0x0, ttl 49, id 16015, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 126, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.812613 IP (tos 0x0, ttl 49, id 16016, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 122, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.812992 IP (tos 0x0, ttl 49, id 16018, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 122, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.813582 IP (tos 0x0, ttl 49, id 16020, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 52, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.814092 IP (tos 0x0, ttl 49, id 16023, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 120, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.814233 IP (tos 0x0, ttl 49, id 16024, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 120, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.815579 IP (tos 0x0, ttl 49, id 16025, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 50, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.815726 IP (tos 0x0, ttl 49, id 16026, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 50, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.815890 IP (tos 0x0, ttl 49, id 16027, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 iptables configuration: [root@server etc]# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ofis tcp -- anywhere anywhere tcp dpt:mysql ofis tcp -- anywhere anywhere tcp dpt:ftp DROP icmp -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination DROP icmp -- anywhere anywhere Chain ofis (2 references) target prot opt source destination ACCEPT all -- OUR_OFFICE_IP anywhere DROP all -- anywhere anywhere top: top - 03:12:19 up 400 days, 15:43, 3 users, load average: 1.49, 1.67, 2.61 Tasks: 751 total, 3 running, 748 sleeping, 0 stopped, 0 zombie Cpu(s): 8.2%us, 1.0%sy, 0.0%ni, 87.9%id, 2.1%wa, 0.1%hi, 0.7%si, 0.0%st Mem: 32949948k total, 26906844k used, 6043104k free, 4707676k buffers Swap: 10223608k total, 0k used, 10223608k free, 14255584k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 36 root 39 19 0 0 0 R 100.8 0.0 17:03.56 ksoftirqd/11 10552 root 15 0 11408 1460 676 R 5.7 0.0 0:00.04 top 7475 lighttpd 15 0 304m 22m 15m S 3.8 0.1 0:05.37 php-cgi 1294 root 10 -5 0 0 0 S 1.9 0.0 380:54.73 kjournald 3574 root 15 0 631m 11m 5464 S 1.9 0.0 0:00.65 node 7766 lighttpd 16 0 302m 19m 14m S 1.9 0.1 0:05.70 php-cgi 10237 postfix 15 0 52572 2216 1692 S 1.9 0.0 0:00.02 scache 1 root 15 0 10372 680 572 S 0.0 0.0 0:07.99 init 2 root RT -5 0 0 0 S 0.0 0.0 0:16.72 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.06 ksoftirqd/0 4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 5 root RT -5 0 0 0 S 0.0 0.0 1:10.46 migration/1 6 root 34 19 0 0 0 S 0.0 0.0 0:01.11 ksoftirqd/1 7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 8 root RT -5 0 0 0 S 0.0 0.0 2:36.15 migration/2 9 root 34 19 0 0 0 S 0.0 0.0 0:00.19 ksoftirqd/2 10 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/2 11 root RT -5 0 0 0 S 0.0 0.0 3:48.91 migration/3 12 root 34 19 0 0 0 S 0.0 0.0 0:00.20 ksoftirqd/3 13 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/3 uname -a [root@server etc]# uname -a Linux thisis.oursite.com 2.6.18-238.19.1.el5 #1 SMP Fri Jul 15 07:31:24 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux arp -an [root@server downloads]# arp -an ? (77.92.136.194) at 00:25:90:04:F0:90 [ether] on eth0 ? (192.168.0.2) at 00:25:90:04:F0:91 [ether] on eth1 ? (77.92.136.193) at 00:23:9C:0B:CD:01 [ether] on eth0

  Read the article

• Ubuntu 10.04 Server on Hyper-V Server R2 has sluggish install and command line

  - by Paul Hobart

  I've installed Ubuntu Server 10.04 (64 bit) on a Hyper-V Server R2. I've encountered two issues that I think are related: Very slow install Very slow command prompt The text-mode installer goes through a series of text-based prompt windows. It takes 7-10 seconds for each of these windows to draw on the screen. The end result is that every time I answer a prompt and hit enter I wait for 15 seconds while the screen redraws line by line. I can literally see each line of text being drawn (like the old 300 baud modems days). Once done installing, scrolling on the command line is super slow. For instance, if a simple command, like "ls", causes the screen to scroll, it will scroll very slowly. This happens on a fresh install. The server functions as a LAMP server and an OpenSSH server, but that's it (I don't even have any Virtual Hosts set up yet). AND this only happens on the Virtual Machine console. I access the console through Hyper-V Manager and don't have this problem on any of my other Virtual Machines. Also, this problem does NOT happen when accessing a shell through OpenSSH. How can I improve this performance issue?

  Read the article

• Boot loop that I cannot bypass

  - by lonewaft

  Recently, on a laptop that I've used for a while, I had a strange issue where OS files were corrupted (device manager) and Windows 8 was hung after the login screen, so I reinstalled Windows 7 over the existing Windows 8 installation, and it worked for a couple days. Today, when I tried to use my laptop, it was stuck on a boot loop. Right after the BIOS screen, it would show a flashing underscore, then restart the computer, again and again until I removed the battery. I tried booting to a windows 7 install CD, but the same flashing underscore - reboot sequence happened when I tried. I tried moving the boot priority around (HDD first, CD/DVD first, even USB first) but nothing changed. After about an hour of tinkering with it, I listened to the HDD sounds, and it sounded like the HDD was trying to spin up, but failing (whining noise increasing in frequency that stopped and started in sync with the system restarting). I am planning to replace the HDD, but I'm still confused as to why a faulty HDD would stop the laptop from booting to my install DVD (tried it on a different computer, it booted from that CD fine). Anybody here have any idea why this might be happening?

  Read the article

• Is there a way to "burn" audio to an ISO? (as an audio CD)

  - by Sootah

  I have an audiobook that I've downloaded via their download manager, and it's loaded into their cutesy little audio program that they force you to use. I can play the book just fine using their proprietary software, and while it's annoying when using my PC, it's utterly UNBEARABLE when I try to listen to it on my Blackberry. The program is INSANELY slow, it literally takes around 30 seconds to switch between tracks, so if I've forgotten where I am in the book it takes me around 15 minutes to finally get to where I was at. I've looked everywhere on how to transcode the book to .MP3, but evidently with their current format it's either extremely convoluted (and I have no desire to dick around with installing some older version of the codec, getting a different transcoding app, and then wrestling with getting it to actually work). Since I'm able to burn a copy of the book to an audio CD, I figure the best way to go about this is to just make the CDs and then rip them off of those to .MP3. In order to avoid wasting two hours, not to mention 14 CD-R's, I was wondering if there's a way to "burn" to an .ISO instead of an actual CD-R. I currently have SlySoft's Virtual CloneDrive installed, so I can mount .ISO's easily enough, but now I want to actually create an ISO via the CD burning process. Just in case I've not explained myself very well, here is an overview of what I intend to do: "Burn" a set of Audio CD .ISOs from the audiobook (hopefully I can do this using Windows Media Player, otherwise I'll be forced to use the audiobook app) Mount an .ISO in Virtual CloneDrive Rip the audio tracks on the mounted .ISO to .MP3s Repeat steps 2-3 until the entire book is in .MP3 format Copy .MP3s to my Blackberry so that I'm not driven insane every time I want to listen to the book in the car, and be able to use Winamp when listening on my computer EDIT: I'd suppose a rather concise way to put it is that I need something that will emulate a CD-R drive, so that you can select it as the output drive in whatever app your burning the audio CD from. (I'd suppose that when you "insert a blank CD-R" the app would then ask you what file to save to)

  Read the article

• SQL Server on Linux

  - by TimothyAWiseman

  For a particular project that is coming up, I am trying to expand my knowledge of Linux, so I am going to set up a Linux system at home. Rather than dual booting, I am thinking about putting SQL Server on a Windows Virtual Machine with Linux as the host at least until this project is over when I will probably switch back to Linux. So, I have a couple of different, but interrelated questions: How well does this work? This is only a test machine at home, so I can easily accept a fair bit of degradation, but if it is going to be a horrible reduction in performance I will dual boot instead. Is there a particular virtual machine manager I should look at to go this route? Since this is my personal machine, price is an issue but I am quite happy to pay a reasonable amount. And finally, given the choice of VMM, is there a particular Linux Distro I should be looking at? [This has been cross posted at Ask.SqlServerCentral.com . I think it may be appropriate at both sites. ]

  Read the article

• LDAP not showing secondary groups

  - by Sandy Dolphinaura

  Currently, I have a LDAP server (running ClearOS if that makes any difference) containing a database of users. So, I went and setup LDAP on a couple of my debian VMs, using libpam-ldapd and I discovered this odd problem. My group/user mapping would show up when running getent group but the secondary groups would not show up when running id . Here is my /etc/nslcd.conf # /etc/nslcd.conf # nslcd configuration file. See nslcd.conf(5) # for details. # The user and group nslcd should run as. uid nslcd gid nslcd # The location at which the LDAP server(s) should be reachable. uri ldaps://10.3.0.1 # The search base that will be used for all queries. base dc=pnet,dc=sandyd,dc=me # The LDAP protocol version to use. #ldap_version 3 # The DN to bind with for normal lookups. binddn cn=manager,ou=internal,dc=pnet,dc=sandyd,dc=me bindpw Me29Dakyoz8Wn2zI # The DN used for password modifications by root. #rootpwmoddn cn=admin,dc=example,dc=com # SSL options ssl on tls_reqcert never # The search scope. #scope sub #filter group (&(objectClass=group)(gidNumber=*)) map group uniqueMember member

  Read the article

• Intel DriverInstall issue on HP ProLiant server DL580G5

  - by TomTom

  Given: A HP ProLiant server to be used for Hyper-V server (R 2) Problem: The server has a HP NC364T quad port card, which actually is an Intel 1000 Pro adapter. We are stuck getting this adapter properly working. We need to get it working with: 2 trunks of 2 ports each one of them fully vlan "aware" (without filtering anything - so that Hyper-V can do the VLAN filtering). So far we did: Install the server Install latest PSP. Problem here - tool does not work to set up teaming. We tried to install the latest ProWin pack from Intel - the drivers there are a LOT more current (26th of Marrch 2010, 9.13.41.0). The intalled driver (Microsoft) is ancient (march 2009, 9.13.4.10) A driver update fails both on command line (pnputil) as well as the PortLock device manager executable. No informatoin is provided. the ANS toolset can not create teams (fails with error - again, no reason provided), I know of no logs and the event log has no information either. Questions: What are the best drivers to use? How do we actually install them? How can we then set up teaming and how do we set up the VLAN behavior wanted?

  Read the article

• Simple P2V help from Linux to Windows

  - by Ke

  Hi, I have two OS's installed on different drives in my PC. One linux (Centos 5.4) and one windows 7. Its getting tiresome to constantly have to stop and restart the PC when I want to use either OS. I would very much like to use Windows 7 as my host OS and access my linux OS from within Windows. However, im having trouble deciphering exactly how to do this (many of the articles seem confusing and a bit overkill) From what i have seen its possible to use VMWare converter to convert the physical linux image to a virtual image so that I can use it in windows. As im having problems understanding how this is done, I would really appreciate a step by step guide (for a newbie), or any simple tutorials that you can point me at. Some questions beforehand: 1) My linux image is around 80gb, do i need to take this into consideration? The linux drive is around 180gb in total. All my other drives are NTFS non writeable in linux (as I use them in windows and ntfs is dodgy in linux), so probably not possible to move the image over to my ntfs drives 2) Can I just zip the linux files up somehow and transfer it to windows to create the p2v? 3) Is it possible to do the P2V conversion while I am logged into windows. I can see the actual linux drive loaded in disk manager, but windows doesnt read linux file systems so im confused as to how to access the linux drive if this is possible. 4) Or will i need to do the whole p2v conversion inside linux? Cheers, any help is much appreciated Ke (a confused p2v newbie)

  Read the article

• Google Play Music Not Adding MP3s On-Demand

  - by J0e3gan

  My recent attempts to add music on-demand to Google Play Music have yielded nothing - no "Processing music..." or "Added __ of __" messages, just nothing. Previously I could add music on-demand; and nothing has changed on the machine from which I successfully added music previously, from which I have tried to add music on-demand recently. What could be hampering my ability to add music on-demand? WHAT I'VE TRIED: Right after I started using GPM, I briefly found that I could not add music (on-demand), but the problem went away after a logout/login. This time a logout/login has not helped. Dragging & dropping or browsing to folders or files to add has made no difference either. Nor has waiting ridiculously long for GPM to show signs of life after adding music on-demand seemed to work. Digging deeper, I read a related Google Play Help article and followed its suggestions... ran the Google Play Music Manager troubleshooter = no errors or warnings double checked my available storage = 8 GB free double checked supported file types = MP3 is still supported (of course) ..., but the problem remains. UPDATE: I found that if I configure GPM to automatically upload music added to specific folders, it strangely does add automatically what it will not add on-demand.

  Read the article

< Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319  | Next Page >