Search Results

Search found 11674 results on 467 pages for 'adding'.

Page 314/467 | < Previous Page | 310 311 312 313 314 315 316 317 318 319 320 321  | Next Page >

  • C-states and P-states : confounding factors for benchmarking

    - by Dave
    I was recently looking into a performance issue in the java.util.concurrent (JUC) fork-join pool framework related to particularly long latencies when trying to wake (unpark) threads in the pool. Eventually I tracked the issue down to the power & scaling governor and idle-state policies on x86. Briefly, P-states refer to the set of clock rates (speeds) at which a processor can run. C-states reflect the possible idle states. The deeper the C-state (higher numerical values) the less power the processor will draw, but the longer it takes the processor to respond and exit that sleep state on the next idle to non-idle transition. In some cases the latency can be worse than 100 microseconds. C0 is normal execution state, and P0 is "full speed" with higher Pn values reflecting reduced clock rates. C-states are P-states are orthogonal, although P-states only have meaning at C0. You could also think of the states as occupying a spectrum as follows : P0, P1, P2, Pn, C1, C2, ... Cn, where all the P-states are at C0. Our fork-join framework was calling unpark() to wake a thread from the pool, and that thread was being dispatched onto a processor at deep C-state, so we were observing rather impressive latencies between the time of the unpark and the time the thread actually resumed and was able to accept work. (I originally thought we were seeing situations where the wakee was preempting the waker, but that wasn't the case. I'll save that topic for a future blog entry). It's also worth pointing out that higher P-state values draw less power and there's usually some latency in ramping up the clock (P-states) in response to offered load. The issue of C-states and P-states isn't new and has been described at length elsewhere, but it may be new to Java programmers, adding a new confounding factor to benchmarking methodologies and procedures. To get stable results I'd recommend running at C0 and P0, particularly for server-side applications. As appropriate, disabling "turbo" mode may also be prudent. But it also makes sense to run with the system defaults to understand if your application exhibits any performance sensitivity to power management policies. The operating system power management sub-system typically control the P-state and C-states based on current and recent load. The scaling governor manages P-states. Operating systems often use adaptive policies that try to avoid deep C-states for some period if recent deep idle episodes proved to be very short and futile. This helps make the system more responsive under bursty or otherwise irregular load. But it also means the system is stateful and exhibits a memory effect, which can further complicate benchmarking. Forcing C0 + P0 should avoid this issue.

    Read the article

  • Issues with shooting in a HTML5 platformer game

    - by fnx
    I'm coding a 2D sidescroller using only JavaScript and HTML5 canvas, and in my game I have two problems with shooting: 1) Player shoots continous stream of bullets. I want that player can shoot only a single bullet even though the shoot-button is being held down. 2) Also, I get an error "Uncaught TypeError: Cannot call method 'draw' of undefined" when all the bullets are removed. My shooting code goes like this: When player shoots, I do game.bullets.push(new Bullet(this, this.scale)); and after that: function Bullet(source, dir) { this.id = "bullet"; this.width = 10; this.height = 3; this.dir = dir; if (this.dir == 1) { this.x = source.x + source.width - 5; this.y = source.y + 16; } if (this.dir == -1) { this.x = source.x; this.y = source.y + 16; } } Bullet.prototype.update = function() { if (this.dir == 1) this.x += 8; if (this.dir == -1) this.x -= 8; for (var i in game.enemies) { checkCollisions(this, game.enemies[i]); } // Check if bullet leaves the viewport if (this.x < game.viewX * 32 || this.x > (game.viewX + game.tilesX) * 32) { removeFromList(game.bullets, this); } } Bullet.prototype.draw = function() { // bullet flipping uses orientation of the player var posX = game.player.scale == 1 ? this.x : (this.x + this.width) * -1; game.ctx.scale(game.player.scale, 1); game.ctx.drawImage(gameData.getGfx("bullet"), posX, this.y); } I handle removing with this function: function removeFromList(list, object) { for (i in list) { if (object == list[i]) { list.splice(i, 1); break; } } } And finally, in the main game loop I have this: for (var i in game.bullets) { game.bullets[i].update(); game.bullets[i].draw(); } I have tried adding if (game.bullets.length > 0) to the main game loop before the above draw&update calls, but I still get the same error.

    Read the article

  • How to Remove Extensions From, and Force the Trailing Slash at the End of URLs?

    - by Kronbernkzion
    Example of current file structure: example.com/foo.php example.com/bar.html example.com/directory/ example.com/directory/foo.php example.com/directory/bar.html example.com/cgi-bin/directory/foo.cgi I would like to remove HTML, PHP and CGI extensions from, and then force the trailing slash at the end of URLs. So, it could look like this: example.com/foo/ example.com/bar/ example.com/directory/ example.com/directory/foo/ example.com/directory/bar/ example.com/cgi-bin/directory/foo/ I am very frustrated because I've searched for 17 hours straight for solution and visited more than a few hundred pages on various blogs and forums. I'm not joking. So I think I've done my research. Here is the code that sits in my .htaccess file right now: RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME}\.html -f RewriteRule ^(([^/]+/)*[^./]+)/$ $1.html RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} !(\.[a-zA-Z0-9]|/)$ RewriteRule (.*)$ /$1/ [R=301,L] As you can see, this code only removes .html (and I'm not very happy with it because I think it could be done a lot simpler). I can remove the extension from PHP files when I rename them to .html through .htaccess, but that's not what I want. I want to remove it straight. This is the first thing I don't know how to do. The second thing is actually very annoying. My .htaccess file with code above, adds .html/ to every string entered after example.com/directory/foo/. So if I enter example.com/directory/foo/bar (obviously /bar doesn't exist since foo is a file), instead of just displaying message that page is not found, it converts it to example.com/directory/foo/bar.html/, then searches for a file for a few seconds and then displays the not found message. This, of course, is bad behavior. So, once again, I need the code in .htaccess to do the following things: Remove .html extension Remove .php extension Remove .cgi extension Force the trailing slash at the end of URLs Requests should behave correctly (no adding trailing slashes or extensions to strings if file or directory doesn't exist on server) Code should be as simple as possible I would very much appreciate any help. And to first person that gives me the solution, I'll send two $50 iTunes Store gift cards for US store. If this offends anyone, I am truly sorry and I apologize. Thanks in advance.

    Read the article

  • Pretty URL in ADF Faces of JDeveloper 11.1.2.2

    - by Frank Nimphius
    Many features planned for Oracle JDeveloper 12c find their way into current releases of Oracle JDeveloper 11g R1 and JDeveloper 11g R2. One example of such a feature is "pretty URL" - or "clean URL" as the Oracle JDeveloper 11g R2 (11.1.2.2) documentation puts it. "A.2.3.24 Clean URLs Historically, ADF Faces has used URL parameters to hold information, such as window IDs and state. However, URL parameters can prevent search engines from recognizing when URLs are actually the same, and therefore interfere with analytics. URL parameters can also interfere with bookmarking. By default, ADF Faces removes URL parameters using the HTML5 History Management API. If that API is unavailable, then session cookies are used.You can also manually configure how URL parameters are removed using the context parameter oracle.adf.view.rich.prettyURL.OPTIONS. Set the parameter to off so that no parameters are removed. Set the parameter to useHistoryApi to only use the HTML5 History Management API. If a browser does not support this API, then no parameters will be removed. Set the parameter to useCookies to use session cookies to remove parameters. If the browser does not support cookies, then no parameters will be removed." See: http://docs.oracle.com/cd/E26098_01/web.1112/e16181/ap_config.htm#ADFUI12856 So basically, what this part in the documentation says is: In JDeveloper 11g R2 (11.1.2.2), Oracle ADF Faces automatically removes its internally used dynamic parameters from the URL You can influence the setting with the prettyURL.OPTIONS context option, which however is not recommended you to do because the default behavior is able to detect if the browser client supports HTML 5 History management or not. In the latter case it the uses a session cookie and if this doesn't work, falls back to the "old" URL parameter adding. The information that is not so explicit and clearly mentioned in the documentation is that this is only for ADF Faces parameters (such as _afrLoop, Adf-Window-Id, etc.), but not the ADF controller token (_adf.ctrl-state)! Removing the ADF controller token is an enhancement request that will be implemented in Oracle JDeveloper 12c

    Read the article

  • Handy Generic JQuery Functions

    - by Steve Wilkes
    I was a bit of a late-comer to the JQuery party, but now I've been using it for a while it's given me a host of options for adding extra flair to the client side of my applications. Here's a few generic JQuery functions I've written which can be used to add some neat little features to a page. Just call any of them from a document ready function. Apply JQuery Themeroller Styles to all Page Buttons   The JQuery Themeroller is a great tool for creating a theme for a site based on colours and styles for particular page elements. The JQuery.UI library then provides a set of functions which allow you to apply styles to page elements. This function applies a JQuery Themeroller style to all the buttons on a page - as well as any elements which have a button class applied to them - and then makes the mouse pointer turn into a cursor when you mouse over them: function addCursorPointerToButtons() {     $("button, input[type='submit'], input[type='button'], .button") .button().css("cursor", "pointer"); } Automatically Remove the Default Value from a Select Box   Required drop-down select boxes often have a default option which reads 'Please select...' (or something like that), but once someone has selected a value, there's no need to retain that. This function removes the default option from any select boxes on the page which have a data-val-remove-default attribute once one of the non-default options has been chosen: function removeDefaultSelectOptionOnSelect() {     $("select[data-val-remove-default='']").change(function () {         var sel = $(this);         if (sel.val() != "") { sel.children("option[value='']:first").remove(); }     }); } Automatically add a Required Label and Stars to a Form   It's pretty standard to have a little * next to required form field elements. This function adds the text * Required to the top of the first form on the page, and adds *s to any element within the form with the class editor-label and a data-val-required attribute: function addRequiredFieldLabels() {     var elements = $(".editor-label[data-val-required='']");     if (!elements.length) { return; }     var requiredString = "<div class='editor-required-key'>* Required</div>";     var prependString = "<span class='editor-required-label'> * </span>"; var firstFormOnThePage = $("form:first");     if (!firstFormOnThePage.children('div.editor-required-key').length) {         firstFormOnThePage.prepend(requiredString);     }     elements.each(function (index, value) { var formElement = $(this);         if (!formElement.children('span.editor-required-label').length) {             formElement.prepend(prependString);         }     }); } I hope those come in handy :)

    Read the article

  • Exchange 2010, Exchange 2003 Mail Flow issue

    - by Ryan Roussel
    While performing the initial Exchange 2010 deployment for a customer migrating from Exchange 2003, I ran into an issue with mail flow between the two environments.  The Exchange 2003 mailboxes could send to Exchange 2010, as well as to and from the internet.  Exchange 2010 mailboxes could send and receive to the internet, however they could not send to Exchange 2003 mailboxes.   After scouring the internet for a solution, it seemed quite a few people were experiencing this issue with no resolution to be found, or at least not easily.  After many attempts of manually deleting and recreating the routing group connectors,  I finally lucked onto the answer in an obscure comment left to another blogger.   If inheritable permissions are not allowed on the Exchange 2003 object in the Active Directory schema, exchange server authentication cannot be achieved between the servers.   It seems when Blackberry Enterprise Server gets added to 2003 environments, a lot of Admins get tricky and add the BES Admin user explicitly to the server object  to allow  inheritance down from there to all mailboxes.  The problem is they also coincidently turn off inheritance to the server object itself from its parent containers.  You can re-establish inheritance without overwriting the existing ACL however so that the BES Admin can remain in the server object ACL.   By re-establishing inheritance to the 2003 server object, mail flow was instantly restored between the servers.    To re-establish inheritance: 1. Open ASDIedit by adding the snap-in to a MMC (should be included on your 2008 server where Exchange 2010 is installed) 2. Navigate to Configuration > Services > Microsoft Exchange > Exchange Organization > Administrative Groups > First Administrative Group > Servers 3. In the right pane, right click on the CN=Server Name of your Exchange 2003 Server, select properties 4. Navigate to the Security tab, hit advanced toward the bottom. 5. Check the checkbox that reads “include inheritable permissions” toward the bottom of the dialogue box.

    Read the article

  • Workflow 4.5 is Awesome, cant wait for 5.0!

    - by JoshReuben
    About 2 years ago I wrote a blog post describing what I would like to see in Workflow vnext: http://geekswithblogs.net/JoshReuben/archive/2010/08/25/workflow-4.0---not-there-yet.aspx At the time WF 4.0 was a little rough around the edges – the State Machine was on codeplex and people were simulating state machines with Flowcharts. Last year I built a near- realtime machine management system using WF 4.0.1 – its managing the internal operations of this device: http://landanano.com/products/commercial   Well WF 4.5 has come a long way – many of my gripes have been addressed: C# expressions - no more VB 'AndAlso' clauses state machine awesomeness - can query current state many designer improvements - Document Outline is so much more succinct than Designer! Separate WCF Service Contract interfaces and ability to generate activities from contract operations ability to rehydrate to updated flow definitions via DynamicUpdateMap and WorkflowIdentity you can read about the new features here: http://msdn.microsoft.com/en-us/library/hh305677(VS.110).aspx   2013 could be the year of Workflow evangelism for .NET, as it comes together as the DSL language. Eg on Azure it could be used to graphically orchestrate between WebRoles, WorkerRoles and AppFabric Queues and the ServiceBus – that would be grand.   Here’s a list of things I’d like to see in Workflow 5.0: Stronger Parallelism support for true multithreaded workflows . A Workflow executes on a single thread – wouldn’t it be great if we had the ability to model TPL DataFlow? Parallel is not really parallel, just allows AsyncCodeActivity.     support for recursion an ExpressionTree activity with an editor design surface a math activity pack return of application level protocol (3.51 WF services) – automatically expose a state machine as a WCF service with bookmark Receive activities generated from OperationContract automatically placed in state transition triggers. A new HTML5 ActivityDesigner control – support with different CSS3  skinnable hooks,  remote connectivity (had to roll my own) A data flow view – crucial to understanding the big picture Ability to refactor a Sequence to custom activity in a separate .xaml file – like Expression Blend does for UserControl state machine global error handling - if all states goto an error state, you quickly get visual spagetti. Now you could nest a state machine, but what if you want an application level protocol whereby each state exposes certain WCF ops. DSL RAD editing - Make the Document Outline into a DSL editor for adding activities  – For WF to really succeed as a higher level of abstraction, It needs to be more productive than raw coding - drag & drop on the designer is currently too slow compared to just typing code. Extensible Wizard API - for pluggable WF editor experience other execution models beyond Sequence, Flowchart & StateMachine: SSIS, Behavior Trees,  Wolfram Model tool – surprise us! improvements to Designer debugging API - SourceLocation is tied to XAML file line number and char position, and ModelService access seems convoluted - why not leverage WPF LogicalTreeHelper / VisualTreeHelper ? Workflow Team , keep on rocking!

    Read the article

  • Getting Started Plugging into the "Find in Projects" Dialog

    - by Geertjan
    In case you missed it amidst all the code in yesterday's blog entry, the "Find in Projects" dialog is now pluggable. I think that's really cool. The code yesterday gives you a complete example, but let's break it down a bit and deconstruct down to a very simple hello world scenario. We'll end up with as many extra tabs in the "Find in Projects" dialog as we need, for example, three in this case:  And clicking on any of those extra tabs will, in this simple example, simply show us this: Once we have that, we'll be able to continue adding small bits of code over the next few blog entries until we have something more useful. So, in this blog entry, you'll literally be able to display "Hello World" within a new tab in the "Find in Projects" dialog: import javax.swing.JComponent; import javax.swing.JLabel; import org.netbeans.spi.search.provider.SearchComposition; import org.netbeans.spi.search.provider.SearchProvider; import org.netbeans.spi.search.provider.SearchProvider.Presenter; import org.openide.NotificationLineSupport; import org.openide.util.lookup.ServiceProvider; @ServiceProvider(service = SearchProvider.class) public class ExampleSearchProvider1 extends SearchProvider { @Override public Presenter createPresenter(boolean replaceMode) { return new ExampleSearchPresenter(this); } @Override public boolean isReplaceSupported() { return false; } @Override public boolean isEnabled() { return true; } @Override public String getTitle() { return "Demo Extension 1"; } public class ExampleSearchPresenter extends SearchProvider.Presenter { private ExampleSearchPresenter(ExampleSearchProvider1 sp) { super(sp, true); } @Override public JComponent getForm() { return new JLabel("Hello World"); } @Override public SearchComposition composeSearch() { return null; } @Override public boolean isUsable(NotificationLineSupport nls) { return true; } } } That's it, not much code, works fine in NetBeans IDE 7.2 Beta, and is easier to digest than the big chunk from yesterday. If you make three classes like the above in a NetBeans module, and you install it, you'll have three new tabs in the "Find in Projects" dialog. The only required dependencies are Dialogs API, Lookup API, and Search in Projects API. Read the javadoc linked above and then in next blog entries we'll continue to build out something like the sample you saw in yesterday's blog entry.

    Read the article

  • A sample Memento pattern: Is it correct?

    - by TheSilverBullet
    Following this query on memento pattern, I have tried to put my understanding to test. Memento pattern stands for three things: Saving state of the "memento" object for its successful retrieval Saving carefully each valid "state" of the memento Encapsulating the saved states from the change inducer so that each state remains unaltered Have I achieved these three with my design? Problem This is a zero player game where the program is initialized with a particular set up of chess pawns - the knight and queen. Then program then needs to keep adding set of pawns or knights and queens so that each pawn is "safe" for the next one move of every other pawn. The condition is that either both pawns should be placed, or none of them should be placed. The chessboard with the most number of non conflicting knights and queens should be returned. Implementation I have 4 classes for this: protected ChessBoard (the Memento) private int [][] ChessBoard; public void ChessBoard(); protected void SetChessBoard(); protected void GetChessBoard(int); public Pawn This is not related to memento. It holds info about the pawns public enum PawnType: int { Empty = 0, Queen = 1, Knight = 2, } //This returns a value that shown if the pawn can be placed safely public bool IsSafeToAddPawn(PawnType); public CareTaker This corresponds to caretaker of memento This is a double dimentional integer array that keeps a track of all states. The reason for having 2D array is to keep track of how many states are stored and which state is currently active. An example: 0 -2 1 -1 2 0 - This is current state. With second index 0/ 3 1 - This state has been saved, but has been undone private int [][]State; private ChessBoard [] MChessBoard; //This gets the chessboard at the position requested and assigns it to originator public ChessBoard GetChessBoard(int); //This overwrites the chessboard at given position public void SetChessBoard(ChessBoard, int); private int [][]State; public PlayGame (This is the originator) private bool status; private ChessBoard oChessBoard; //This sets the state of chessboard at position specified public SetChessBoard(ChessBoard, int); //This gets the state of chessboard at position specified public ChessBoard GetChessBoard(int); //This function tries to place both the pawns and returns the status of this attempt public bool PlacePawns(Pawn);

    Read the article

  • OData &ndash; The easiest service I can create

    - by Jon Dalberg
    I wanted to create an OData service with the least amount of code so I fired up Visual Studio and got cracking. I decided to serve up a list of naughty words and make them read-only. Create a new web project. I created an empty MVC 2 application but MVC is not required for OData. Add a new WCF Data Service to the project. I named mine NastyWords.svc since I’m serving up a list of nasty words. Add a class to expose via the service: NastyWord 1: [DataServiceKey("Word")] 2: public class NastyWord 3: { 4: public string Word { get; set; } 5: }   I need to be able to uniquely identify instances of NastyWords for the DataService so I used the DataServiceKey attribute with the “Word” property as the key. I could have added an “ID” property which would have uniquely identified them and would then not need the “DataServiceKey” attribute because the DataService would apply some reflection and heuristics to guess at which property would be the unique identifier. However, the words themselves are unique so adding an “ID” property would be redundantly repetitive. Then I created a data source to expose my NastyWord objects to the service. This is just a simple class with IQueryable<T> properties exposing the entities for my service: 1: public class NastyWordsDataSource 2: { 3: private static IList<NastyWord> words = new List<NastyWord> 4: { 5: new NastyWord{ Word="crap"}, 6: new NastyWord{ Word="darn"}, 7: new NastyWord{ Word="hell"}, 8: new NastyWord{ Word="shucks"} 9: }; 10:   11: public NastyWordsDataSource() 12: { 13: NastyWords = words.AsQueryable(); 14: } 15:   16: public IQueryable<NastyWord> NastyWords { get; private set; } 17: }   Now I can go to the NastyWords.svc class and tell it which data source to use and which entities to expose: 1: public class NastyWords : DataService<NastyWordsDataSource> 2: { 3: // This method is called only once to initialize service-wide policies. 4: public static void InitializeService(DataServiceConfiguration config) 5: { 6: config.SetEntitySetAccessRule("*", EntitySetRights.AllRead); 7: config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; 8: } 9: }   Compile and browse to my NastWords.svc and weep with joy Now I can query my service just like any other OData service. Next time, I’ll modify this service to allow updates to sent so I can build up my list of nasty words. Enjoy!

    Read the article

  • Java: How to manage UDP client-server state

    - by user92947
    I am trying to write a Java application that works similar to MapReduce. There is a server and several workers. Workers may come and go as they please and the membership to the group has a soft-state. To become a part of the group, the worker must send a UDP datagram to the server, but to continue to be part of the group, the worker must send the UDP datagram to the server every 5 minutes. In order to accommodate temporary errors, a worker is allowed to miss as many as two consecutive periodic UDP datagrams. So, the server must keep track of the current set of workers as well as the last time each worker had sent a UDP datagram. I've implemented a class called WorkerListener that implements Runnable and listens to UDP datagrams on a particular UDP port. Now, to keep track of active workers, this class may maintain a HashSet (or HashMap). When a datagram is received, the server may query the HashSet to check if it is a new member. If so, it can add the new worker to the group by adding an entry into the HashSet. If not, it must reset a "timer" for the worker, noting that it has just heard from the corresponding worker. I'm using the word timer in a generic sense. It doesn't have to be a clock of sorts. Perhaps this could also be implemented using int or long variables. Also, the server must run a thread that continuously monitors the timers for the workers to see that a client that times out on two consecutive datagram intervals, it is removed from the HashSet. I don't want to do this in the WorkerListener thread because it would be blocking on the UDP datagram receive() function. If I create a separate thread to monitor the worker HashSet, it would need to be a different class, perhaps WorkerRegistrar. I must share the HashSet with that thread. Mutual exclusion must also be implemented, then. My question is, what is the best way to do this? Pointers to some sample implementation would be great. I want to use the barebones JDK implementation, and not some fancy state maintenance API that takes care of everything, because I want this to be a useful demonstration for a class that I am teaching. Thanks

    Read the article

  • WebCenter Customer Spotlight: SICE

    - by me
    Author: Peter Reiser - Social Business Evangelist, Oracle WebCenter  Solution SummarySociedad Ibérica de Construcciones Eléctricas, S.A. (SICE) is a Spanish company specializes in engineering and technology integration for intelligent transport systems and environmental control systems. They had a large quantity of engineering and environmental planning documents  which they wanted to manage, classify and integrate with their existing enterprise resource planning (ERP) system. SICE adapted  Oracle WebCenter Content to classify and manage more than 30 different types, defined a security plan to ensure the integrity and recovery of various document types and integrated the document management solution with SICE’s third-party enterprise resource planning (ERP) system. SICE  accelerated time to market for all projects, minimized time required to identify and recover documents  and achieved greater efficiency in all operations. Company Overview Created in 1921, Sociedad Ibérica de Construcciones Eléctricas, S.A. (SICE) currently specializes in engineering and technology integration for intelligent transport systems and environmental control systems. It has more than 2,500 employees, with operations in Spain and various locations in Latin America, the United States, Africa, and Australia. Business Challenges They had a large quantity of engineering and environmental planning documents generated in research and projects which they wanted to manage, classify and integrate with their existing enterprise resource planning (ERP) system. Solution Deployed SICE worked with the Oracle Partner ABAST Solutions to evaluate and choose the best document management system, ultimately selecting Oracle WebCenter Content over other options including  Documentum, SharePoint, OpenText, and Alfresco.They adapted Oracle WebCenter Content to classify and manage more than 30 different types, defined a security plan to ensure the integrity and recovery of various document types and integrated the document management solution  with SICE’s third-party enterprise resource planning (ERP) system to accelerate incorporation with the documentation system and ensure integrity ERP system data. Business Results SICE  accelerated time to market for all projects by releasing reports and information that support and validate engineering projects, stored all documents in a single repository with organizationwide accessibility, minimizing time required to identify and recover documents needed for reports to initiate and execute engineering and building projects. Overall they achieved greater efficiency in all operations, including technical and impact report development and construction documentation management. “The correct and efficient management of information is vital to our environmental management activity. Oracle WebCenter Content  serves as a basis for knowledge management practices, with the objective of adding greater value to everything that we do.” Manuel Delgado, IT Project Engineering, Sociedad Ibérica de Construcciones Eléctricas, S.A Additional Information SICE Customer Snapshot Oracle WebCenter Content

    Read the article

  • Unknown C# keywords: params

    - by Chris Skardon
    Often overlooked, and (some may say) unloved, is the params keyword, but it’s an awesome keyword, and one you should definitely check out. What does it do? Well, it lets you specify a single parameter that can have a variable number of arguments. You what? Best shown with an example, let’s say we write an add method: public int Add(int first, int second) { return first + second; } meh, it’s alright, does what it says on the tin, but it’s not exactly awe-inspiring… Oh noes! You need to add 3 things together??? public int Add(int first, int second, int third) { return first + second + third; } oh yes, you code master you! Overloading a-plenty! Now a fourth… Ok, this is starting to get a bit ridiculous, if only there was some way… public int Add(int first, int second, params int[] others) { return first + second + others.Sum(); } So now I can call this with any number of int arguments? – well, any number > 2..? Yes! int ret = Add(1, 2, 3); Is as valid as: int ret = Add(1, 2, 3, 4); Of course you probably won’t really need to ever do that method, so what could you use it for? How about adding strings together? What about a logging method? We all know ToString can be an expensive method to call, it might traverse every node on a class hierarchy, or may just be the name of the type… either way, we don’t really want to call it if we can avoid it, so how about a logging method like so: public void Log(LogLevel level, params object[] objs) { if(LoggingLevel < level) return; StringBuilder output = new StringBuilder(); foreach(var obj in objs) output.Append((obj == null) ? "null" : obj.ToString()); return output; } Now we only call ‘ToString’ when we want to, and because we’re passing in just objects we don’t have to call ToString if the Logging Level isn’t what we want… Of course, there are a multitude of things to use params for…

    Read the article

  • Where I missed boot.properties.?

    - by Dyade, Shailesh M
    Today one of my customer was trying to start the WebLogic Server ( Production Instance) , though he was trying to start the server in a standard way, but it was failing due to below error :   ####<Oct 22, 2012 12:14:43 PM BST> <Warning> <Security> <BanifB1> <> <main> <> <> <> <1350904483998> <BEA-090066> <Problem handling boot identity. The following exception was generated: weblogic.security.internal.encryption.EncryptionServiceException: weblogic.security.internal.encryption.EncryptionServiceException: [Security:090219]Error decrypting Secret Key java.security.ProviderException: setSeed() failed> And it started failing into below causes. ####<Oct 22, 2012 12:16:45 PM BST> <Critical> <WebLogicServer> <BanifB1> <AdminServer> <main> <<WLS Kernel>> <> <> <1350904605837> <BEA-000386> <Server subsystem failed. Reason: java.lang.AssertionError: java.lang.reflect.InvocationTargetException java.lang.AssertionError: java.lang.reflect.InvocationTargetException weblogic.security.internal.encryption.EncryptionServiceException: weblogic.security.internal.encryption.EncryptionServiceException: [Security:090219]Error decrypting Secret Key java.security.ProviderException: setSeed() failed weblogic.security.internal.encryption.EncryptionServiceException: [Security:090219]Error decrypting Secret Key java.security.ProviderException: setSeed() failed at weblogic.security.internal.encryption.JSafeSecretKeyEncryptor.decryptSecretKey(JSafeSecretKeyEncryptor.java:121) Customer was facing this issue without any changes in the system, it was stable suddenly started seeing this issue last night. When we checked, customer was manually entering the username and password, config.xml had the entries encrypted However when verified, customer had the boot.properties at the Servers/AdminServer/security folder and DomainName/security didn't have this file. Adding boot.properies fixed the issue. Regards Shailesh Dyade 

    Read the article

  • Managing Regulated Content in WebCenter: USDM and Oracle Offer a New Part 11 Compliant Solution for Life Sciences

    - by Michael Snow
    Guest post today provided by Oracle partner, USDM  Regulated Content in WebCenterUSDM and Oracle offer a new Part 11 compliant solution for Life Sciences (White Paper) Life science customers now have the ability to take advantage of all of the benefits of Oracle’s WebCenter Content, a global leader in Enterprise Content Management.   For the past year, USDM has been developing best practice compliance solutions to meet regulated content management requirements for 21 CFR Part 11 in WebCenter Content. USDM has been an expert in ECM for life sciences since 1999 and in 2011, certified that WebCenter was a 21CFR Part 11 compliant content management platform (White Paper).  In addition, USDM has built Validation Accelerators Packs for WebCenter to enable life science organizations to quickly and cost effectively validate this world class solution.With the Part 11 certification, Oracle’s WebCenter now provides regulated life science organizations  the ability to manage REGULATORY content in WebCenter, as well as the ability to take advantage of ALL of the additional functionality of WebCenter, including  a complete, open, and integrated portfolio of portal, web experience management, content management and social networking technology.  Here are a few screen shot examples of Part 11 functionality included in the product: E-Sign, E-Sign Rendor, Meta Data History, Audit Trail Report, and Access Reporting. Gone are the days that life science companies have to spend millions of dollars a year to implement, maintain, and validate ECM systems that no longer meet the ever changing business and regulatory requirements.  Life science companies now have the ability to use WebCenter Content, an ECM system with a substantially lower cost of ownership and unsurpassed functionality.Oracle has been #1 in life sciences because of their ability to develop cost effective, easy-to-use, scalable solutions which help increase insight and efficiency to drive growth for their customers.  Adding a world class ECM solution to this product portfolio allows life science organizations the chance to get rid of costly ECM systems that no longer meet their needs and use WebCenter, part of the Oracle Fusion Technology stack, with their other leading enterprise applications.USDM provides:•    Expertise in Life Science ECM Business Processes•    Prebuilt Life Science Configuration in WebCenter •    Validation Accelerator Packs for WebCenterUSDM is very proud to support Oracle’s expanding commitment to Life Sciences…. For more information please contact:  [email protected] Oracle will be exhibiting at DIA 2012 in Philadelphia on June 25-27. Stop by our booth (#2825) to learn more about the advantages of a centralized ECM strategy and see the Oracle WebCenter Content solution, our 21 CFR Part 11 compliant content management platform.

    Read the article

  • Assessing Relative Maintainability

    - by João Bragança
    We (a contractor, actually) are implementing an off the shelf system to replace a legacy homegrown system for the core domain of the company (designing widgets). Unfortunately both systems will have to run concurrently for some time, as the product just isn't ready yet. Also, the decision was made to only migrate some of the widgets from the legacy system, based on date of last sale activity. Later on a new requirement came down: certain people in the company, most of them outside of the widget development context, want to search all widgets. The search results screen has 3 pieces of data: a GUID, a human readable id that is searchable, and a brief description (may need to be searchable in the future). In the widget details, there will be multiple screens. These screens align very well along SOA / bounded context lines - a screen for marketing data, a screen for sales history, etc. UML ahead! I am probably using the wrong kind of arrows here so please forgive me. The current solution - which is not in production yet - is something like the following: Both systems will be queried and the controller will merge the results. The new system has its own proprietary query language (we've alleviated this a bit with a LINQ provider). It also puts a lot of data on the wire. 15 search results typically run about 60k of unintelligible SOAP-wrapped xml. So I would prefer to avoid querying this system directly. These two systems publish events to help us integrate with other systems, mainly an ERP system. One of these events contains all the data necessary for the search screen. I proposed the following alternative: However I am being told that 'adding another database' will create more maintenance down the road. However, I believe this to be false, as I had to add a relatively simple feature that took several hours longer than anticipated because of this merging code. I want to get a feel for which system is more maintainable in the long run. I personally have not had the burden of maintaining any large system. I want something more than my gut. Specifically I'd like to know if having more, specialized physical databases is more or less maintainable than having less larger physical databases.

    Read the article

  • Building a Solaris 11 repository without network connection

    - by user12611852
    Solaris 11 has been released and is a fantastic new iteration of Oracle's rock solid, enterprise operating system.  One of the great new features is the repository based Image Packaging system.  IPS not only introduces new cloud based package installation services, it is also integrated with our zones, boot environment and ZFS file systems to provide a safe, easy and fast way to perform system updates. My customers typically don't have network access and, in fact, can't connect to any network until they have "Authority to connect."  It's useful, however, to build up a Solaris 11 system with additional software using the new Image Packaging System and locally stored repository. The Solaris 11 documentation describes how to create a locally stored repository with full explanations of what the commands do. I'm simply providing the quick and dirty steps.  The easiest way is to download the ISO image, burn to a DVD and insert into your DVD drive.  Then as root: pkg set-publisher -G '*' -g file:///cdrom/sol11repo_full/repo solaris Now you can to install software using the GUI package manager or the pkg commands.  If you would like something more permanent (or don't have a DVD drive), however, it takes a little more work. After installing Solaris 11, download (on another system perhaps) the two files that make up the Solaris 11 repository from our download site Sneaker-net the files to your Solaris 11 system Unzip and cat the two files together to create one large ISO image. The file is about 6.9 GB in size zfs create rpool/export/repoSolaris11 zfs set atime=off rpool/export/repoSolaris11 zfs set compression=on rpool/export/repoSolaris11 (save some space) lofiadm -a sol-11-1111-repo-full.iso /dev/lofi/1 mount -F hsfs /dev/lofi/1 /mnt You could stop here and set the publisher to point to the /mnt/repo location, however, this mount will not be persistent across reboots. Copy the repository from the mounted ISO image to a permanent, on disk location. rsync -aP /mnt/repo /export/repoSolaris11 pkgrepo -s /export/repoSolaris11 refresh pkg set-publisher -G '*' -g /export/repoSolaris11/repo solaris You now have a locally installed repository for adding additional software packages for Solaris 11.  The documentation also takes you through publishing your repository on the network so that others can access it.

    Read the article

  • On the art of self-promotion

    - by Tony Davis
    I attended Brent Ozar's Building the Fastest SQL Servers session at Tech Ed last week, and found myself engulfed in a 'perfect storm' of excellent technical and presentational skills coupled with an astute awareness of the value of promoting one's work. I spend a lot of time at such events talking to developers and DBAs about the value of blogging and writing articles, and my impression is that some could benefit from a touch less modesty and a little more self-promotion. I sense a reticence in many would-be writers. Is what I have to say important enough? Haven't far more qualified and established commentators, MVPs and so on, already said it? While it's a good idea to pick reasonably fresh and interesting topics, it's more important not to let such fears lead to writer's block. In the eyes of any future employer, your published writing is an extension of your resume. They will not care that a certain MVP knows how to solve problem x, but they will be very interested to see that you have tackled that same problem, and solved it in your own way, and described the process in your own voice. In your current job, your writing is one of the ways you can express to your peers, and to the organization as a whole, the value of what you contribute. Many Developers and DBAs seem to rely on the idea that their work will speak for itself, and that their skill shines out from it. Unfortunately, this isn't always true. Many Development DBAs, for example, will be painfully aware of the massive effort involved in tuning and adding resilience to rapidly developed applications. However, others in the organization who are unaware of what's involved in getting an application that is 'done' ready for production may dismiss such efforts as fussiness or conservatism. At the dark end of the development cycle, chickens come home to roost, but their droppings tend to land on those trying to clear up the mess. My advice is this: next time you fix a bug or improve the resilience or performance of a database or application, make sure that you use team meetings, informal discussions and so on to ensure that people understand what the problem was and what you had to do to fix it. Use your blog to describe, generally, the process you adopted, the resources you used and the insights that came from your work. Encourage your colleagues to do the same. By spreading the art of self-promotion to everyone involved in an IT project, we get a better idea of the extent of the work and the value of the contribution of all the team members. As always, we'd love to hear what you think. This very week, Simple-talk launches its new blogging platform. If any of this has moved you to 'throw your hat into the ring', drop us a mail at [email protected]. Cheers, Tony.

    Read the article

  • Got Samba, Got PyNeighbourhood but still no connection. What else do I need?

    - by Frank A
    I am sure I had already hit post before but then could only find it by backing through browser. Was it deleted? is the question too dumb, sorry that I do not know the right jargon just trying to get answers to my problem anyway have reworded stuff a bit This seems to be a number one requirement for lots of people and 2 months on from setting up my Ubuntu pc, I am still unable to get a lasting connection in either direction. Adding a windows pc to a network is so easy... just a few clicks and get on with using it all. Using all command approaches and modifying configuration files is hardly user friendly. Googling brings up thousands of solutions but mostly they are too techy or assume the user is fully aware of how to use Linux. I do realise that their must be a lot of flavours for connecting to networks. So far I have installed Samba and fiddled with its config file. The day I did all that it worked from XP to Ubuntu. When I came back two days later to transfer my data over it would not connect. Although the the share does show up in Windows (XP) My Network Places. Today I installed PyNeighbourhood and this shows the Ubuntu box and all of the shares I had created at some point on Ubuntu and it even shows this under the XP workgroup name. But instructions on setting the connection up seem to relate to an earlier version and nothing seems to work there either. (I unshared most of those test folders but they still show up her but that is another question. When I click on mount- I can only click on one on the Ubuntu machine, there is one with no name so I assume this to be my attempt to add one XP Shared drive using ipaddress, I get errors. (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", mount error(6): No such device or address Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) OK tried to find the manual referred to... only an old comment that manual would be produced for future versions. I saw in another thread that Winbind is needed as well or at least I assume as well? Totally lost again? Please help, what else needs to be installed to connect to win pcs on the network.

    Read the article

  • Unable to ping inside or outside network with default gateway 0.0.0.0

    - by agentroadkill
    I've been around here before and I could usually piece together everything to more or less get myself up and running, but this time I'm truly stumped. I'm trying to connect my new 14.04 install to a network, and I'm forced to be behind my college's router. Now I've tested the vary cable that is right now plugged into my Ubuntu box on a Windows, Mac OS X, and even my friend's Ubuntu 14.04 box, and they all connect no problem. I've been trying to track this down for about two days, but every time I get close to it, the bug jumps to some other piece of my connection. Anyway, as it sits ifconfig -a gives: eth2 Lninkencap:Ethernet HWaddr:00:1f:bc:08:31:1d inet addr:10.32.51.51 Bcast:10.32.51.155 Mask: 255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 RX bytes:0 TX bytes:0 as well as the local loopback, but I'm assuming that is not an issue here. sudo dhclient -v eth2 returns: Listening on LPF/<hardware address of my integrated NIC, above> Sending on <same> Sending on Socket/fallback DHCPREQUEST of 10.32.51.51 on eth2 to 255.255.255.255 port 67 (xid=0x6f4a66ba) <two more lines of same> DHCPDISCOVER on eth2 to 255.255.255.255 port 67 interval 3 (xid=0x156f9fb4) <many more of above with varying intervals> No DHCPOFFERS received. Trying recorded lease 10.32.51.51 RTNETLINK answers: File exists bound: renewal in <large number> seconds If I then try ping 8.8.8.8, I get: connect: Network is unreachable /etc/resolv.conf only contains the two lines telling you not to edit it, while /etc/network/interfaces only has the loopback interface block in it. I've tried commenting out the "option rfc3442" line in /etc/dhcp/dhclient.conf which seemed to fix this issue for many people, as well as adding the line send vendor-class-indentifier "MSFT5.0" to dhclient.conf as well to tell the router I'm a windows box, in case they don't like Linux. Finally, route -n reveals: Destination Gateway Genmask Flags Metric Ref Use Iface 10.32.51.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 I would like to apologize in advance for the doubtless butchered text alignment, but I'm obviously typing this all by hand, reading from the terminal as I type commands. I'm hoping this is an interesting problem, and not something I blithely stumbled past in my (apparent) over-confidence. TIA! Quick addendum before posting: The activity light on the ethernet port are lit and one blinks during boot, but they rarely (and seemingly randomly) do so afterwards (both are dark) even while running dhclient in the foreground. When I had the Ubuntu box tethered to my MacBook earlier, I got what looked like a normal power/uplink blinking pattern, but was unable to ping one from the other.

    Read the article

  • Why does my ID3DXSprite appear to be incorrectly scaled?

    - by Bjoern
    I am using D3D9 for rendering some simple things (a movie) as the backmost layer, then on top of that some text messages, and now wanted to add some buttons to that. Before adding the buttons everything seemed to have worked fine, and I was using a ID3DXSprite for the text as well (ID3DXFont), now I am loading some graphics for the buttons, but they seem to be scaled to something like 1.2 times their original size. In my test window I centered the graphic, but it being too big it just doesnt fit well, for example the client area is 640x360, the graphic is 440, so I expect 100 pixel on left and right, left side is fine [I took screenshot and "counted" the pixels in photoshop], but on the right there is only about 20 pixels) My rendering code is very simple (I am omitting error checks, et cetera, for brevity) // initially viewport was set to width/height of client area // clear device m_d3dDevice->Clear( 0, NULL, D3DCLEAR_TARGET|D3DCLEAR_STENCIL|D3DCLEAR_ZBUFFER, D3DCOLOR_ARGB(0,0,0,0), 1.0f, 0 ); // begin scene m_d3dDevice->BeginScene(); // render movie surface (just two triangles to which the movie is rendered) m_d3dDevice->SetRenderState(D3DRS_ALPHABLENDENABLE,false); m_d3dDevice->SetSamplerState( 0, D3DSAMP_MAGFILTER, D3DTEXF_LINEAR ); // bilinear filtering m_d3dDevice->SetSamplerState( 0, D3DSAMP_MINFILTER, D3DTEXF_LINEAR ); // bilinear filtering m_d3dDevice->SetTextureStageState( 0, D3DTSS_COLORARG1, D3DTA_TEXTURE ); m_d3dDevice->SetTextureStageState( 0, D3DTSS_COLORARG2, D3DTA_DIFFUSE ); //Ignored m_d3dDevice->SetTextureStageState( 0, D3DTSS_COLOROP, D3DTOP_SELECTARG1 ); m_d3dDevice->SetTexture( 0, m_movieTexture ); m_d3dDevice->SetStreamSource(0, m_displayPlaneVertexBuffer, 0, sizeof(Vertex)); m_d3dDevice->SetFVF(Vertex::FVF_Flags); m_d3dDevice->DrawPrimitive(D3DPT_TRIANGLELIST, 0, 2); // render sprites m_sprite->Begin(D3DXSPRITE_ALPHABLEND | D3DXSPRITE_SORT_TEXTURE | D3DXSPRITE_DO_NOT_ADDREF_TEXTURE); // text drop shadow m_font->DrawText( m_playerSprite, m_currentMessage.c_str(), m_currentMessage.size(), &m_playerFontRectDropShadow, DT_RIGHT|DT_TOP|DT_NOCLIP, m_playerFontColorDropShadow ); // text m_font->DrawText( m_playerSprite, m_currentMessage.c_str(), m_currentMessage.size(), &m_playerFontRect, DT_RIGHT|DT_TOP|DT_NOCLIP, m_playerFontColorMessage ) ); // control object m_sprite->Draw( m_texture, 0, 0, &m_vecPos, 0xFFFFFFFF ); // draws a few objects like this m_sprite->End() // end scene m_d3dDevice->EndScene(); What did I forget to do here? Except for the control objects (play button, pause button etc which are placed on a "panel" which is about 440 pixels wide) everything seems fine, the objects are positioned where I expect them, but just too big. By the way I loaded the images using D3DXCreateTextureFromFileEx (resizing wnidow, and reacting to lost device, etc, works fine too). For experimenting, I added some code to take an identity matrix and scale is down on the x/y axis to 0.75f, which then gave me the expected result for the controls (but also made the text smaller and out of position), but I don't know why I would need to scale anything. My rendering code is so simple, I just wanted to draw my 2D objects 1;1 the size they came from the file... I am really very inexperienced in D3D, so the answer might be very simple...

    Read the article

  • Creating a shared library that might be used with desktop applications and web projects

    - by dreza
    I have been involved in a number of MVC.NET and c# desktop projects in our company over the last year or so while also managing to kept my nose poked into other projects (in a read-only learning capacity of course). From this I've noticed that across the various projects and teams there is a-lot of functionality that has been well designed against good interfaces and abstractions. Because we tend to like our own work at times, I noticed a couple of projects had the exact same class, method copied into it as it had obviously worked on one and so was easily moved to a new project (probably by the same developer who originally wrote it) I mentioned this fact in one of our programmer meetings we have occasionally and suggested we pull some of this functionality into a core company library that we can build up over time and use across multiple projects. Everyone agreed and I started looking into this possibility. However, I've come across a stumbling block pretty early on. Our team primarily focuses on MVC at the moment and we have projects mainly in 2.0 but are starting to branch to 3.0. We also have a number of desktop applications that might benefit from some shared classes and basic helper methods. Initially when creating this DLL I included some shared classes that could be used across any project type (Web, Client etc) but then I started looking at adding some shared modules that would be useful in our MVC applications only. However this meant I had to include a reference to some Microsoft Web DLL's in order to leverage some of the classes I was creating (at this stage MVC 2.0). Now my issue is that we have a shared DLL that has references to web specific libraries that could also possibly be used in a client application. Not only that, our DLL referenced initially MVC 2.0 and we will eventually move onto MVC 3.0 for all projects. But alot of the classes in this library I expect to still be relevant to MVC 3 etc Our code within this DLL is separated into it's own namespaces such as: CompanyDLL.Primitives CompanyDLL.Web.Mvc CompanyDLL.Helpers etc etc So, my questions are: Is it OK to do a shared library like this, or if we have web specific features in it should we create a separate web DLL only targeted at a specific framework or MVC version? If it's OK, what kind of issues might we face when using the library that references MVC 2 in a MVC 3 project for example. I would be thinking that we might run into some sort of compatibility issue, or even issues where the developers using the library doesn't realize they need MVC 2.0 libraries. They might only want to use some of the generic classes etc The concept seemed like a good idea at the time, but I'm starting to think maybe it's not really a practical solution. But the number of times I've seen copied classes and methods across projects because they are proven tested code is a bit unnerving to be perfectly honest!

    Read the article

  • Why would I learn C++11, having known C and C++?

    - by Shahbaz
    I am a programmer in C and C++, although I don't stick to either language and write a mixture of the two. Sometimes having code in classes, possibly with operator overloading, or templates and the oh so great STL is obviously a better way. Sometimes use of a simple C function pointer is much much more readable and clear. So I find beauty and practicality in both languages. I don't want to get into the discussion of "If you mix them and compile with a C++ compiler, it's not a mix anymore, it's all C++" I think we all understand what I mean by mixing them. Also, I don't want to talk about C vs C++, this question is all about C++11. C++11 introduces what I think are significant changes to how C++ works, but it has introduced many special cases that change how different features behave in different circumstances, placing restrictions on multiple inheritance, adding lambda functions, etc. I know that at some point in the future, when you say C++ everyone would assume C++11. Much like when you say C nowadays, you most probably mean C99. That makes me consider learning C++11. After all, if I want to continue writing code in C++, I may at some point need to start using those features simply because my colleagues have. Take C for example. After so many years, there are still many people learning and writing code in C. Why? Because the language is good. What good means is that, it follows many of the rules to create a good programming language. So besides being powerful (which easy or hard, almost all programming languages are), C is regular and has few exceptions, if any. C++11 however, I don't think so. I'm not sure that the changes introduced in C++11 are making the language better. So the question is: Why would I learn C++11? Update: My original question in short was: "I like C++, but the new C++11 doesn't look good because of this and this and this. However, deep down something tells me I need to learn it. So, I asked this question here so that someone would help convince me to learn it." However, the zealous people here can't tolerate pointing out a flaw in their language and were not at all constructive in this manner. After the moderator edited the question, it became more like a "So, how about this new C++11?" which was not at all my question. Therefore, in a day or too I am going to delete this question if no one comes up with an actual convincing argument. P.S. If you are interested in knowing what flaws I was talking about, you can edit my question and see the previous edits.

    Read the article

  • Syncing client and server CRUD operations using json and php

    - by Justin
    I'm working on some code to sync the state of models between client (being a javascript application) and server. Often I end up writing redundant code to track the client and server objects so I can map the client supplied data to the server models. Below is some code I am thinking about implementing to help. What I don't like about the below code is that this method won't handle nested relationships very well, I would have to create multiple object trackers. One work around is for each server model after creating or loading, simply do $model->clientId = $clientId; IMO this is a nasty hack and I want to avoid it. Adding a setCientId method to all my model object would be another way to make it less hacky, but this seems like overkill to me. Really clientIds are only good for inserting/updating data in some scenarios. I could go with a decorator pattern but auto generating a proxy class seems a bit involved. I could use a generic proxy class that uses a __call function to allow for original object data to be accessed, but this seems wrong too. Any thoughts or comments? $clientData = '[{name: "Bob", action: "update", id: 1, clientId: 200}, {name:"Susan", action:"create", clientId: 131} ]'; $jsonObjs = json_decode($clientData); $objectTracker = new ObjectTracker(); $objectTracker->trackClientObjs($jsonObjs); $query = $this->em->createQuery("SELECT x FROM Application_Model_User x WHERE x.id IN (:ids)"); $query->setParameters("ids",$objectTracker->getClientSpecifiedServerIds()); $models = $query->getResults(); //Apply client data to server model foreach ($models as $model) { $clientModel = $objectTracker->getClientJsonObj($model->getId()); ... } //Create new models and persist foreach($objectTracker->getNewClientObjs() as $newClientObj) { $model = new Application_Model_User(); .... $em->persist($model); $objectTracker->trackServerObj($model); } $em->flush(); $resourceResponse = $objectTracker->createResourceResponse(); //Id mappings will be an associtave array representing server id resources with client side // id. //This method Dosen't seem to flexible if we want to return additional data with each resource... //Would have to modify the returned data structure, seems like tight coupling... //Ex return value: //[{clientId: 200, id:1} , {clientId: 131, id: 33}];

    Read the article

  • C Minishell Command Expansion Printing Gibberish

    - by Optimus_Pwn
    I'm writing a unix minishell in C, and am at the point where I'm adding command expansion. What I mean by this is that I can nest commands in other commands, for example: $> echo hello $(echo world! ... $(echo and stuff)) hello world! ... and stuff I think I have it working mostly, however it isn't marking the end of the expanded string correctly, for example if I do: $> echo a $(echo b $(echo c)) a b c $> echo d $(echo e) d e c See it prints the c, even though I didn't ask it to. Here is my code: msh.c - http://pastebin.com/sd6DZYwB expand.c - http://pastebin.com/uLqvFGPw I have a more code, but there's a lot of it, and these are the parts that I'm having trouble with at the moment. I'll try to tell you the basic way I'm doing this. Main is in msh.c, here it gets a line of input from either the commandline or a shellfile, and then calls processline (char *line, int outFD, int waitFlag), where line is the line we just got, outFD is the file descriptor of the output file, and waitFlag tells us whether or not we should wait if we fork. When we call this from main we do it like this: processline (buffer, 1, 1); In processline, we allocate a new line: char expanded_line[EXPANDEDLEN]; We then call expand, in expand.c: expand(line, expanded_line, EXPANDEDLEN); In expand, we copy the characters literally from line to expanded_line until we find a $(, which then calls: static int expCmdOutput(char *orig, char *new, int *oldl_ind, int *newl_ind) orig is line, and new is expanded line. oldl_ind and newl_ind are the current positions in the line and expanded line, respectively. Then we pipe, and recursively call processline, passing it the nested command(for example, if we had "echo a $(echo b)", we would pass processline "echo b"). This is where I get confused, each time expand is called, is it allocating a new chunk of memory EXPANDEDLEN long? If so, this is bad because I'll run out of stack room really quickly(in the case of a hugely nested commandline input). In expand I insert a null character at the end of the expanded string, so why is it printing past it? If you guys need any more code, or explanations, just ask. Secondly, I put the code in pastebin because there's a ton of it, and in my experience people don't like it when I fill up several pages with code. Thanks.

    Read the article

< Previous Page | 310 311 312 313 314 315 316 317 318 319 320 321  | Next Page >