Search Results

Search found 11110 results on 445 pages for 'ebs 12'.

Page 314/445 | < Previous Page | 310 311 312 313 314 315 316 317 318 319 320 321  | Next Page >

• [Mac OS X] Terratec Cinergy Hybrid T USB XS is not recognized anymore

  - by Gabble

  I have used Terratec Cinergy Hybrid T USB XS for years now, alongside with Elgato EyeTV software. I am a happy and completely satisfied user! Since a couple of weeks the USB sitck stopped working on my MacPro1,1 (OS version 10.6.3): EyeTV does not see any device attached, and actually, the green led on the stick stays off. 1) it is not a USB port fault: I have unplugged any other USB/Firewire device and tried with different USB ports, to no avail (any other USB devices work as expected on any port) 2) I have completely uninstalled EyeTV software, including preferences and system daemons/extensions, rebooted and reinstalled the latest EyeTV. No way. 3) reset the PRAM. Nope. 4) checked the Apple System Profiler - USB: No device attached, The MacPro does not see it at all. ============= I need to say that: a) the device worked as a charm even with the latest OS 10.6.x (so it's not a OS upgrade cause) b) I have plugged the Terratec Cinergy Hybrid T USB XS to my MacBook5,1 where EyeTV is not installed and was never installed: The green led on the stick turns on, the growl bubble pops up, and the device is perfectly recognized by the system. Apple System Profiler says (sorry, Italian language): Cinergy Hybrid T USB XS (2882): ID prodotto: 0x005e ID fornitore: 0x0ccd Versione: 1.10 Numero di serie: 061102005755 Velocità: Fino a 12 Mb/sec Produttore: TerraTec Electronic GmbH ID posizione: 0x04100000 Corrente disponibile (mA): 500 Corrente necessaria (mA): 500 At this point I am pretty sure the Terratec stick is not damaged and there is something wrong with my MacPro. I kindly ask you: Is there a way to force my MacPro recognize the USB device? What can I check? Is there something that caches USB connection that can be reset? A OS reinstall would be the very last resort for me… Thanks in advance for any help you will offer!

  Read the article

• Website does not resolve in browser but traceroute is successful

  - by Colum

  I am trying to figure out an issue. My internet is working fine, but this one website is not resolving. It works via a proxy, traceroute works: 1 192.168.1.1 (192.168.1.1) 4.205 ms 0.568 ms 0.510 ms 2 * * * 3 67.59.255.13 (67.59.255.13) 10.583 ms 7.949 ms 7.557 ms 4 67.59.255.61 (67.59.255.61) 10.256 ms 9.576 ms 13.083 ms 5 64.15.8.126 (64.15.8.126) 9.943 ms 11.929 ms 11.452 ms 6 64.15.0.217 (64.15.0.217) 14.655 ms 14.092 ms 13.771 ms 7 64.15.0.118 (64.15.0.118) 33.201 ms 34.875 ms 36.544 ms 8 xe-6-0-3.ar1.ord1.us.nlayer.net (69.31.111.169) 34.027 ms 34.957 ms 34.231 ms 9 ae1-30g.cr1.ord1.us.nlayer.net (69.31.111.133) 82.683 ms 35.138 ms 37.592 ms 10 xe-3-0-0.cr2.iad1.us.nlayer.net (69.22.142.26) 41.657 ms 34.063 ms 34.519 ms 11 ae2-30g.ar2.iad1.us.nlayer.net (69.31.31.186) 35.780 ms 36.361 ms 33.968 ms 12 as33597.xe-3-0-7.ar2.iad1.us.nlayer.net (69.31.30.230) 35.086 ms as33597.xe-3-0-7.ar2.iad1.us.nlayer.net (69.31.30.234) 38.031 ms as33597.xe-3-0-7.ar2.iad1.us.nlayer.net (69.31.30.230) 36.833 ms 13 cr1.iad2.inforelay.net (66.231.176.246) 32.595 ms cr2.iad1.inforelay.net (66.231.176.10) 31.771 ms cr1.iad2.inforelay.net (66.231.176.246) 32.622 ms 14 cr1.iad2.inforelay.net (66.231.176.246) 32.956 ms 33.625 ms !X 41.058 ms 15 * cr1.iad2.inforelay.net (66.231.176.246) 35.312 ms !X * 16 * cr1.iad2.inforelay.net (66.231.176.246) 32.814 ms !X * 17 cr1.iad2.inforelay.net (66.231.176.246) 35.459 ms !X * 53.137 ms !X Ping returns this: Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 Request timeout for icmp_seq 2 Request timeout for icmp_seq 3 Request timeout for icmp_seq 4 Request timeout for icmp_seq 5 Request timeout for icmp_seq 6 But what I can not figure out is why my browsers (Firefox, Safari, Opera) can not resolve the domain. I am on a Wifi connection. What could be the problem? BTW I am on a Mac (10.6.5)

  Read the article

• rsnapshot schedule overlapping, help with backup schedule

  - by Znarkus

  Hello, I have to following configuration. rsnapshot.conf interval halfhourly 4 interval hourly 6 interval twohourly 12 interval daily 7 interval weekly 4 crontab 0,30 * * * * /usr/bin/rsnapshot halfhourly >> /var/log/rsnapshot.halfhourly.log 2>&1 5 * * * * /usr/bin/rsnapshot hourly >> /var/log/rsnapshot.hourly.log 2>&1 10 */2 * * * /usr/bin/rsnapshot twohourly >> /var/log/rsnapshot.twohourly.log 2>&1 15 3 * * * /usr/bin/rsnapshot daily >> /var/log/rsnapshot.daily.log 2>&1 20 6 * * MON /usr/bin/rsnapshot weekly >> /var/log/rsnapshot.weekly.log 2>&1 Only halfhourly is running correctly now. hourly spits out this error: rsnapshot encountered an error! The program was invoked with these options: /usr/bin/rsnapshot hourly ---------------------------------------------------------------------------- ERROR: Lockfile /var/run/rsnapshot.pid exists and so does its process, can not continue To me it seems like my 5 min space between halfhourly and hourly is too small. Is this configuration crazy? I like having backups every thirty minutes, that will probably save my ass some day. Please help me make a decent backup schedule, that doesn't clog up the system, but creates frequent enough backups. Thank you.

  Read the article

• How can I wipe my iPod classic and fix any bad sectors on the hard drive without killing it?

  - by Sam Meldrum

  My iPod never finishes syncing and only syncs audio, not pictures or video - any ideas as to how I can fix it? My iPod classic 160GB worked well for a couple of years. I used to sync a lot of photos at full resolution to it, but this recently stopped working after I moved to Windows 7. iTunes is on latest version - 9.1.1.12 iPod software is up to date - 1.1.2 Windows 7 is fully up to date and patched The symptoms are that the iPod will start to sync, all audio (music and podcasts will sync successfully) but the syncing will then just appear to continue - itunes message: Syncing iPod. Do not Disconnect. This sync never completes - I have left it trying for days. I have tried resetting the iPod using the Restore button, whereupon it restarts sync from default options and again will sync audio, but nothing else. I suspect that something has gone wrong on the hard-drive - either a bad sector or some corrupt data. Is there a process I can go through to fix this? E.g. SpinRite or a format? If so how do I go about formatting an iPod and will it be recognised as an iPod after format and work as normal? Any advice on what to try next much appreciated? Update I have eliminated problems with the files, PC or iTunes as they sync fine to other iPods. I have also eliminated the cable by trying different cables which work with other iPods. What I'd really like to know is if there is any way to more fundamentally wipe the iPod safely, attempt to repair any bad sectors on the hard drive and then start from scratch. Anyone ever managed this?

  Read the article

• OpenVPN with MacOS X Client and same subnets in local and remote net.

  - by Daniel

  I have a homenetwork 192.168.1.0/24 with gteway 192.168.1.1 and a remote network with the same parameters. Now I want to create a OpenVPN tunnel between those networks. I have no problems with Windows, because Windows routes everything to 192.168.1.0/24 except 192.168.1.1 throught the tunnel. On MacOS X however I see the folling line in the Details window: 2010-05-10 09:13:01 WARNING: potential route subnet conflict between local LAN [192.168.1.0/255.255.255.0] and remote VPN [192.168.1.0/255.255.255.0] When I list the routes I get the following: Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.1.1 UGSc 13 3 en1 127 localhost UCS 0 0 lo0 localhost localhost UH 12 3589 lo0 169.254 link#5 UCS 0 0 en1 192.168.1 link#5 UCS 1 0 en1 192.168.1.1 0:1e:e5:f4:ec:7f UHLW 13 17 en1 1103 192.168.1.101 localhost UHS 0 0 lo0 192.168.6 192.168.6.5 UGSc 0 0 tun0 192.168.6.5 192.168.6.6 UH 1 0 tun0 My Interfaces are en1 - My local Wifi network tun0 - The tunnel interface As can be seen from the routes above there is no entry for 192.168.1.0/24 that routes the traffic through the tunnel interface. When I manually route a single IP like 192.168.1.16 over the tunnel gateway 192.168.6.6, this works. Q: How do I set up my routes in MacOS X for the same behaviour as on windows, to route everything except 192.168.1.1 through the tunnel, but leave the default gateway to be my local 192.168.1.1 ?

  Read the article

• Access keystore on Sun ONE Webserver 6.1 for 2048 bit key length SSL

  - by George Bailey

  We want to get 2048 bit key length CSR requests. The browser based GUI provides us with a 1024 bit CSR and I don't know how to change that. It seems that 1024 bit key lengths will no longer supported by SSL companies. (Lower cost options only support 2048 bit. Thawte who is much more expensive say they accept 1024 for only one or two year certificates, but not 3). The legacy systems in question are running Sun ONE Webserver 6.1. Upgrading would be time consuming and we would rather not have to do that right now. We will be phasing these out but it will take awhile, so... Got it!! http://middlewarekb.wordpress.com/2010/06/30/how-to-generate-2048-bit-keypair-using-sun-one-or-iplanet-6-1-servers/ It is for the same version webserver I am using. /opt/SUNWwbsvr/bin/https/admin/bin/certutil -R -s "CN=sub.domain.ext,OU=org unit,O=company name,L=city,ST=spelled state,C=US,E=email" -a -k rsa -g 2048 -v 12 -d /opt/SUNWwbsvr/alias -P https-sub.domain.ext-hostname- -Z SHA1 Previous efforts edited out.

  Read the article

• Event Log "Wake Source" when system wakes from sleep

  - by Doltknuckle

  So I've been troubleshooting sleep timers for our systems and have run across an interesting issue. I need a way to report how long a system was awake after a number of different inputs. Now, I've discovered that the System Log tracks wake and sleep events and even tells you the times that everything happens at. The thing is doesn't tell you is what triggered the wake event. It does give you a numerical code however. Here are some examples of what I am finding. Index : 2901 EntryType : Information InstanceId : 1 Message : The system has resumed from sleep. Sleep Time: 2010-10-01T23:20:06.097488100Z Wake Time: 2010-10-03T17:41:12.796400500Z Wake Source: 0 Category : (0) CategoryNumber : 0 Source : Microsoft-Windows-Power-Troubleshooter -- Index : 2841 EntryType : Information InstanceId : 1 Message : The system has resumed from sleep. Sleep Time: 2010-10-01T19:19:37.239789600Z Wake Time: 2010-10-01T21:28:48.921200800Z Wake Source: 4HID Keyboard Device Category : (0) CategoryNumber : 0 Source : Microsoft-Windows-Power-Troubleshooter So here's my question: Does anyone know what the different numerical codes for the "Wake Source" mean? I think "0" is a magic packet and "4" is a USB device. Does anyone have any idea if there is any documentation out there on this for Windows 7? Thanks in advance

  Read the article

• Rsync Push files from linux to windoes. ssh issue - connection refused

  - by piyush c

  For some reason I want to run a script to move files from Linux machine to Windows. I have installed cwRsync on my windows machine and able to connect to linux machine. When i execute following command: rsync -e "ssh -l "piyush"" -Wgovz --timeout 120 --delay-updates --remove-sent-files /usr/local/src/piyush/sync/* "[email protected]:/cygdrive/d/temp" Where 10.0.0.60 is my widows machine and I am running above command on Linux - CentOS 5.5. After running command I get following error message: ssh: connect to host 10.0.0.60 port 22: Connection refused rsync: connection unexpectedly closed (0 bytes received so far) [sender] rsync error: error in rsync protocol data stream (code 12) at io.c(463) [sender=2.6.8] [root@localhost sync]# ssh [email protected] ssh: connect to host 10.0.0.60 port 22: Connection refused I have modified my firewall settings on widows to allow all ports. I think this issue is due to SSH Daemon not present on my windows machine. So I tried installing OpenSSH on my machine and running ssh-agent but didn't helped. I tried similar command to run on my widows machine to pull files from Linux and its working fine. For some reason I want command for Linux machine so that I can embed it in a shell script. Can you suggest me if I am missing anything.

  Read the article

• Centos 5.xx Nagios sSMTP mail cannot be sent from nagios server, but works great from console

  - by adam

  I spent last 3 hours of reasearch on how to get nagios to work with email notifications, i need to send emails form work where the only accesible smtp server is the company's one. i managed to get it done from the console using: mail [email protected] working perfectly for the purpouse i set up ssmtp.conf so as: [email protected] mailhub=smtp.company.com:587 [email protected] AuthPass=mypassword FromLineOverride=YES useSTARTTLS=YES rewriteDomain=company.pl hostname=nagios UseTLS=YES i also edited the file /etc/ssmtp/revaliases so as: root:[email protected]:smtp.company.com:587 nagios:[email protected]:smtp.company.com:587 nagiosadmin:[email protected]:smtp.company.com:587 i also edited the file permisions for /etc/ssmtp/* so as: -rwxrwxrwx 1 root nagios 371 lis 22 15:27 /etc/ssmtp/revaliases -rwxrwxrwx 1 root nagios 1569 lis 22 17:36 /etc/ssmtp/ssmtp.conf and i assigned to proper groups i belive: cat /etc/group |grep nagios mail:x:12:mail,postfix,nagios mailnull:x:47:nagios nagios:x:2106:nagios nagcmd:x:2107:nagios when i send mail manualy, i recieve it on my priv box, but when i send mail from nagios the mail log says: Nov 22 17:47:03 certa-vm2 sSMTP[9099]: MAIL FROM:<[email protected]> Nov 22 17:47:03 certa-vm2 sSMTP[9099]: 550 You are not allowed to send mail from this address it says [email protected] and im not allowed to send mails claiming to be [email protected], its suppoused to be [email protected], what am i doing wrong? i ran out of tricks... kind regards Adam xxxx

  Read the article

• OpenVZ with brdiged interfaces and VLAN

  - by Deimosfr

  Hi, I've got a problem with OpenVZ with brdiged VLAN. Here is my configuration : +------+ +-------+ +-----------+ +---------+ br0 |VE101 | | | | OpenBSD |----->| Debian |------->| | | WAN |--->| Router | | OpenVZ | +------+ | | | Firewall |----->| br0 br1 | br1 +------+ +-------+ +-----------+ +---------+------->|VE102 | |br0 | | |VLAN br0.110 +------+ v +---------+ |VE103.110| +---------+ I can't make VLAN working on br0 (br0.110) and I would like to understand why. I don't have any switch so no problem with unmanageable switch. I've configured a VLAN interface on OpenBSD in /etc/hostname.vlan110 : inet 192.168.110.254 255.255.255.0 NONE vlan 110 vlandev sis1 And it seams working fine. I've also adapted my PF configuration to work with VLAN but I don't see any incoming traffic. On my Debian lenny, here is my interfaces configuration : # The loopback network interface auto lo iface lo inet loopback # br0 auto br0 iface br0 inet static address 192.168.100.1 netmask 255.255.255.0 gateway 192.168.100.254 network 192.168.100.0 broadcast 192.168.100.255 bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off # VLAN 110 auto br0.110 iface br0.110 inet static address 192.168.110.1 netmask 255.255.255.0 network 192.168.110.0 gateway 192.168.110.254 broadcast 192.168.110.255 pre-up vconfig add br0 110 post-down vconfig rem br0.110 It looks like ok, but when I start my VE, here is the message : ... Configure veth devices: veth103.0 Adding interface veth103.0 to bridge br0.110 on CT0 for VE103 can't add veth103.0 to bridge br0.110: Operation not supported VE start in progress... So I've got one error here. I've followed this documentation http://wiki.openvz.org/VLAN but it doesn't work. I've certainly missed something but I don't know why. Someone could help me please ? Thanks

  Read the article

• PHP-FPM issue on LEMP Stack and WordPress

  - by jw60660

  I'm very much a NGINX and Server Admin beginner. I used this tutorial to install NGINX / PHP / mySQL / WordPress: C3M Digital Tutorial In this tutorial the backend php-cgi setup is configured using fastcgi. php5-fpm was installed during this tutorial: apt-get install nginx-full php5-fpm php5 php5-mysql php5-apc php5-mysql php5-xsl php5-xmlrpc php5-sqlite php5-snmp php5-curl After reading that the NGINX configuration on the WordPress codec was more secure than most tutorials, I decided to use the codex configuration: WordPress NGINX configuration in Codex The Codex configuration uses php-fpm for backend php-cgi. When opening the browser I got a 502 Bad Gateway error. The error log was: "2012/06/10 21:18:27 [crit] 14009#0: *4 connect() to unix:/tmp/php-fpm.sock failed (2: No such file or directory) while connecting to upstream, client: 12.3.456.789, server: mywebsite.com, request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/tmp/php-fpm.sock:", hos t: "mywebsite.com"" In the main NGINX configuration file supplied by the codex I noticed the line starting "server unix:" in the upstream php block which point to the empty directory: # Upstream to abstract backend connection(s) for PHP. upstream php { server unix:/tmp/php-fpm.sock; # server 127.0.0.1:9000; } I checked the folder at /tmp and it was empty. Seems I missed configuring php-fpm to play with NGINX. Can someone point me in the right direction? Much appreciated!

  Read the article

• When I restart my LXC environment, the container does not re-bind to the IP address

  - by RoboTamer

  The IP does no longer respond to a remote ping With restart I mean: lxc-stop -n vm3 lxc-start -n vm3 -f /etc/lxc/vm3.conf -d -- /etc/network/interfaces auto lo iface lo inet loopback up route add -net 127.0.0.0 netmask 255.0.0.0 dev lo down route add -net 127.0.0.0 netmask 255.0.0.0 dev lo # device: eth0 auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address 192.22.189.58 netmask 255.255.255.248 gateway 192.22.189.57 broadcast 192.22.189.63 bridge_ports eth0 bridge_fd 0 bridge_hello 2 bridge_maxage 12 bridge_stp off post-up ip route add 192.22.189.59 dev br0 post-up ip route add 192.22.189.60 dev br0 post-up ip route add 192.22.189.61 dev br0 post-up ip route add 192.22.189.62 dev br0 -- /etc/lxc/vm3.conf lxc.utsname = vm3 lxc.rootfs = /var/lib/lxc/vm3/rootfs lxc.tty = 4 #lxc.pts = 1024 # pseudo tty instance for strict isolation lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 lxc.network.name = eth0 lxc.network.mtu = 1500 #lxc.cgroup.cpuset.cpus = 0 # security parameter lxc.cgroup.devices.deny = a # Deny all access to devices lxc.cgroup.devices.allow = c 1:3 rwm # dev/null lxc.cgroup.devices.allow = c 1:5 rwm # dev/zero lxc.cgroup.devices.allow = c 5:1 rwm # dev/console lxc.cgroup.devices.allow = c 5:0 rwm # dev/tty lxc.cgroup.devices.allow = c 4:0 rwm # dev/tty0 lxc.cgroup.devices.allow = c 4:1 rwm # dev/tty1 lxc.cgroup.devices.allow = c 4:2 rwm # dev/tty2 lxc.cgroup.devices.allow = c 1:9 rwm # dev/urandon lxc.cgroup.devices.allow = c 1:8 rwm # dev/random lxc.cgroup.devices.allow = c 136:* rwm # dev/pts/* lxc.cgroup.devices.allow = c 5:2 rwm # dev/pts/ptmx lxc.cgroup.devices.allow = c 254:0 rwm # rtc # mounts point lxc.mount.entry=proc /var/lib/lxc/vm3/rootfs/proc proc nodev,noexec,nosuid 0 0 lxc.mount.entry=devpts /var/lib/lxc/vm3/rootfs/dev/pts devpts defaults 0 0 lxc.mount.entry=sysfs /var/lib/lxc/vm3/rootfs/sys sysfs defaults 0 0

  Read the article

• Quad channel memory and compatibility

  - by balteo

  My motherboard has quad channel memory compatibility. There are 8 memory slots in all: 4 slots are black the other 4 slots are white. I currently have 4 memory modules of 1 GB each in the 4 white slots. That leaves me with 4 free memory slots. My question is: can I put 4 memory modules of 2 GB each in the 4 remaining slots or do I have to use modules of 1 GB all over? FYI here is the output of lshw: alpha description: Ordinateur Tour produit: Precision WorkStation 690 *-cpu:0 description: CPU produit: Intel(R) Xeon(R) CPU X5355 @ 2.66GHz *-memory description: Mémoire Système identifiant matériel: 1000 emplacement: Carte mère taille: 4GiB *-bank:0 description: FB-DIMM DDR2 FB-DIMM Synchrone 667 MHz (1,5 ns) produit: HYMP512F72CP8N3-Y5 fabriquant: Hynix Semiconductor (Hyundai Electronics) identifiant matériel: 0 numéro de série: 56737501 emplacement: DIMM 1 taille: 1GiB bits: 64 bits horloge: 667MHz (1.5ns) *-bank:1 description: FB-DIMM DDR2 FB-DIMM Synchrone 667 MHz (1,5 ns) produit: HYMP512F72CP8N3-Y5 fabriquant: Hynix Semiconductor (Hyundai Electronics) identifiant matériel: 1 numéro de série: 48115124 emplacement: DIMM 2 taille: 1GiB bits: 64 bits horloge: 667MHz (1.5ns) *-bank:2 description: FB-DIMM DDR2 FB-DIMM Synchrone 667 MHz (1,5 ns) produit: HYMP512F72CP8N3-Y5 fabriquant: Hynix Semiconductor (Hyundai Electronics) identifiant matériel: 2 numéro de série: 48115523 emplacement: DIMM 3 taille: 1GiB bits: 64 bits horloge: 667MHz (1.5ns) *-bank:3 description: FB-DIMM DDR2 FB-DIMM Synchrone 667 MHz (1,5 ns) produit: HYMP512F72CP8N3-Y5 fabriquant: Hynix Semiconductor (Hyundai Electronics) identifiant matériel: 3 numéro de série: 48115424 emplacement: DIMM 4 taille: 1GiB bits: 64 bits horloge: 667MHz (1.5ns) *-bank:4 description: FB-DIMM DDR2 FB-DIMM Synchrone 667 MHz (1,5 ns) [vide] fabriquant: FFFFFFFFFFFF identifiant matériel: 4 numéro de série: FFFFFFFF emplacement: DIMM 5 bits: 64 bits horloge: 667MHz (1.5ns) *-bank:5 description: FB-DIMM DDR2 FB-DIMM Synchrone 667 MHz (1,5 ns) [vide] fabriquant: FFFFFFFFFFFF identifiant matériel: 5 numéro de série: FFFFFFFF emplacement: DIMM 6 bits: 64 bits horloge: 667MHz (1.5ns) *-bank:6 description: FB-DIMM DDR2 FB-DIMM Synchrone 667 MHz (1,5 ns) [vide] fabriquant: FFFFFFFFFFFF identifiant matériel: 6 numéro de série: FFFFFFFF emplacement: DIMM 7 bits: 64 bits horloge: 667MHz (1.5ns) *-bank:7 description: FB-DIMM DDR2 FB-DIMM Synchrone 667 MHz (1,5 ns) [vide] fabriquant: FFFFFFFFFFFF identifiant matériel: 7 numéro de série: FFFFFFFF emplacement: DIMM 8 bits: 64 bits horloge: 667MHz (1.5ns) *-pci:0 description: Host bridge produit: 5000X Chipset Memory Controller Hub fabriquant: Intel Corporation identifiant matériel: 100 information bus: pci@0000:00:00.0 version: 12 bits: 32 bits horloge: 33MHz

  Read the article

• how i can identify which process is making UDP traffic on linux?

  - by boos

  my machine is continously making udp dns traffic request. what i need to know is the PID of the process generating this traffic. The normal way in TCP connection is to use netstat/lsof and get the process associated at the pid. Is UDP the connection is stateles, so, when i call netastat/lsof i can see it only if the UDP socket is opened and it's sending traffic. I have tried with lsof -i UDP and with nestat -anpue but i cant be able to find wich process is doing that request because i need to call lsof/netstat exactly when the udp traffic is sended, if i call lsof/netstat before/after the udp datagram is sended is impossible to view the opened UDP socket. call netstat/lsof exactly when 3/4 udp packet is sended is IMPOSSIBLE. how i can identify the infamous process ? I have already inspected the traffic to try to identify the sended PID from the content of the packet, but is not possible to identify it from the contect of the traffic. anyone can help me ? I'm root on this machine FEDORA 12 Linux noise.company.lan 2.6.32.16-141.fc12.x86_64 #1 SMP Wed Jul 7 04:49:59 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux

  Read the article

• Connection refused after installing vsftp on Ubuntu 8.04 with fail2ban

  - by Patrick

  I have been using an Ubuntu 8.04 server with fail2ban for a while now (12+ months) and using ftp over SSH without any problems. I have a new user that needs to put files onto the server from an IP modem. I have installed vsftp (sudo apt-get install vsftp) and everything installed correctly. I have created an ftp user on the server following this guide. Whenever I try to connect to the server with my ftp program (filezilla) I get an immediate response of: Connection attempt failed with "ECONNREFUSED - Connection refused by server". I have looked into fail2ban and cannot find any problems. The iptables setup is: Chain INPUT (policy ACCEPT) target prot opt source destination fail2ban-ssh tcp -- anywhere anywhere multiport dports ssh Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain fail2ban-ssh (1 references) target prot opt source destination RETURN all -- anywhere anywhere VSFTP config file (commented lines removed) listen=YES anonymous_enable=NO local_enable=YES write_enable=YES dirmessage_enable=YES xferlog_enable=YES connect_from_port_20=YES chown_uploads=YES chown_username=[username] secure_chroot_dir=/var/run/vsftpd pam_service_name=vsftpd rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key Any ideas on what is preventing access to the server?

  Read the article

• Corrupt install of Ruby?

  - by wilhelmtell

  I'm having issues requiring 'digest/sha1'. ~$ ./configure --prefix=$HOME/usr --program-suffix=19 --enable-shared ~$ make ~$ make install ~$ irb19 irb(main):001:0> require 'digest/sha1' LoadError: dlopen(/Users/matan/usr/lib/ruby19/1.9.1/i386-darwin9.8.0/digest/sha1.bundle, 9): Symbol not found: _rb_Digest_SHA1_Finish Referenced from: /Users/matan/usr/lib/ruby19/1.9.1/i386-darwin9.8.0/digest/sha1.bundle Expected in: flat namespace - /Users/matan/usr/lib/ruby19/1.9.1/i386-darwin9.8.0/digest/sha1.bundle from (irb):1:in `require' from (irb):1 from /Users/matan/usr/bin/irb19:12:in `<main>' irb(main):002:0> I know some standard modules require fine, while others don't. If i'd say require 'digest' then that works fine. Just a couple of days ago I uninstalled Ruby and re-installed it. When I first installed Ruby I installed it in a similar manner, from source prefixed at my local $HOME/usr directory. I tried removing each and every file make install installs, then re-installing, but that didn't help. Do you have an idea what the issue is and how to resolve it?

  Read the article

• install zenoss on ubuntu, raise No valid ZENHOME error

  - by bxshi

  I've added an user with name zenoss, and set export ZENHOME=/usr/local/zenoss in ~/.bashrc under /home/zenoss, and when using echo $ZENHOME, it could show /usr/local/zenoss When install zenoss, I switched to zenoss and then run install.sh under zenoss-4.2.0/inst, when it tries to run Tests, the error occured. ------------------------------------------------------- T E S T S ------------------------------------------------------- Running org.zenoss.utils.ZenPacksTest Tests run: 3, Failures: 0, Errors: 3, Skipped: 0, Time elapsed: 0.045 sec <<< FAILURE! Running org.zenoss.utils.ZenossTest Tests run: 3, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.71 sec Results : Tests in error: testGetZenPack(org.zenoss.utils.ZenPacksTest): No valid ZENHOME could be found. testGetPackPath(org.zenoss.utils.ZenPacksTest): No valid ZENHOME could be found. testGetAllPacks(org.zenoss.utils.ZenPacksTest): No valid ZENHOME could be found. Tests run: 6, Failures: 0, Errors: 3, Skipped: 0 [INFO] ------------------------------------------------------------------------ [INFO] Reactor Summary: [INFO] [INFO] Zenoss Core ....................................... SUCCESS [27.643s] [INFO] Zenoss Core Utilities ............................. FAILURE [12.742s] [INFO] Zenoss Jython Distribution ........................ SKIPPED [INFO] ------------------------------------------------------------------------ [INFO] BUILD FAILURE [INFO] ------------------------------------------------------------------------ [INFO] Total time: 40.586s [INFO] Finished at: Wed Sep 26 15:39:24 CST 2012 [INFO] Final Memory: 16M/60M [INFO] ------------------------------------------------------------------------ [ERROR] Failed to execute goal org.apache.maven.plugins:maven-surefire-plugin:2.8:test (default-test) on project utils: There are test failures. [ERROR] [ERROR] Please refer to /home/zenoss/zenoss-4.2.0/inst/build/java/java/zenoss-utils/target/surefire-reports for the individual test results.

  Read the article

• Per connection bandwidth limit

  - by Kyr

  Apparently, our server box running Windows Server 2008 R2 has a per connection bandwidth limit of 0.2 MB/s. Meaning, while one TCP connection can pull at max 0.2 MB/s, 60 parallel connections can pull 12 MB/s. We first noticed this when trying to checkout large SVN repository from this server. I used a simple Java application to test this, transferring data from server to workstation using variable number of threads (one connection per thread). Server part of the application simply writes 1 MB memory buffer to socket 100 times, so there is no disk involvement. Each connection topped at 0.2 MB/s. Same per connection limit was for only one as was for 60 parallel connections. The problem is that I have no idea from where this limit comes from. I have very little experience administrating Windows Server, so I was mostly trying to find something by googling. I have checked the following: Local Computer Policy QoS Packet Scheduler Limit reservable bandwidth: it's Not configured; Group Policy Management Console: we have two GOPs, but neiher has any Policy-based QoS defined; There isn't any bandwidth limiter program installed, as far as I can tell. We're using standard Windows Firewall. I can update this question with any additional information if needed.

  Read the article

• FTP not listing directory NcFTP PASV

  - by Jacob Talbot

  I am attempting to setup Multicraft on my server, all is running smoothly however the FTP won't allow anyone to connect from a remote FTP client, where net2ftp will work smoothly from a remote location. I have included the transcript from my FTP client, Transmit below to give you an idea of what's going on. I have disabled iptables as well, and still no luck either way. Transmit 4.1.7 (x86_64) Session Transcript [Version 10.8.2 (Build 12C54)] (21/10/12 11:23 PM) LibNcFTP 3.2.3 (July 23, 2009) compiled for UNIX 220: Multicraft 1.7.1 FTP server Connected to ateam.bn-mc.net. Cmd: USER jacob.9 331: Username ok, send password. Cmd: PASS xxxxxxxx 230: Login successful Cmd: TYPE A 200: Type set to: ASCII. Logged in to ateam.bn-mc.net as jacob.9. Cmd: SYST 215: UNIX Type: L8 Cmd: FEAT 211: Features supported: EPRT EPSV MDTM MLSD MLST type*;perm*;size*;modify*;unique*;unix.mode;unix.uid;unix.gid; REST STREAM SIZE TVFS UTF8 End FEAT. Cmd: OPTS UTF8 ON 200: OK Cmd: PWD 257: "/" is the current directory. Cmd: PASV Could not read reply from control connection -- timed out. (SReadline 1)

  Read the article

• Question About mk-table-checksum Results

  - by stevenmusumeche

  Hello, I have 1 master and 2 slaves. I am using MySQL 5.1.42 on all servers. I am attempting to use mk-table-checksum to verify that their data is in sync, but I am getting unexpected results on one of the slaves. First, I generate the checksums on the master like this: mk-table-checksum h=localhost --databases MYDB --tables {$table_list} --replicate=MYDB.mk_checksum --chunk-size=10M My understanding is that this runs the checksum queries on the master which then propagate via normal replication to the slaves. So, no locking is needed because the slaves will be at the same logical point in time when they run the checksum queries on themselves. Is this correct? Next, to verify that the checksums match, I run this on the master: mk-table-checksum --databases MYDB --replicate=IRC.mk_checksum --replicate-check 1 h=localhost,u=maatkit,p=xxxx If there are any differences, I repair the slaves like this: mk-table-sync --execute --verbose --replicate IRC.mk_checksum h=localhost,u=maatkit,p=xxxx After doing all of this, I repaired both slaves with mk-table-sync. However, everytime I run this sequence (after everything has already been repaired), one slave is perfectly in sync but one slave always has a few tables out of sync. I am 99.999% sure that the data on the slaves matches, since I repaired everything and the tables were not even updated on the master between runs of the checksum script. What would cause a few tables to always show out of sync on only one of the slaves? I am stuck. Here is the output: Differences on h=x.x.x.x,p=...,u=maatkit DB TBL CHUNK CNT_DIFF CRC_DIFF BOUNDARIES IRC product 10 0 1 product_id = 147377 AND product_id < 162085 IRC post_order_survey 0 0 1 1=1 IRC mk_heartbeat 0 0 1 1=1 IRC mailing_list 0 0 1 1=1 IRC honey_pot_log 0 0 1 1=1 IRC product 12 0 1 product_id = 176793 AND product_id < 191501 IRC product 18 0 1 product_id = 265041 IRC orders 26 0 1 order_id = 694472 IRC orders_product 6 0 1 op_id = 935375

  Read the article

• dovecot login issue with plain passwords

  - by user3028

  I am having an odd problem in dovecot, the first time I try to login via telnet dovecot gives a error, the second time it works, both within the same telnet session. This is the telnet session, note the 'BAD Error in IMAP command received by server' and the "a OK" just after that : telnet 192.168.1.2 143 * OK Waiting for authentication process to respond.. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE STARTTLS AUTH=PLAIN] Dovecot ready. a login someUserLogin supersecretpassword * BAD Error in IMAP command received by server. a login someUserLogin supersecretpassword a OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS] Logged in dovecot configuration >dovecot -n # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 3.5.0-34-generic x86_64 Ubuntu 12.04.2 LTS auth_debug = yes auth_verbose = yes disable_plaintext_auth = no login_trusted_networks = 192.168.1.0/16 mail_location = maildir:~/Maildir passdb { driver = pam } protocols = " imap" ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } This is the log file: Jul 3 12:27:51 linuxServer dovecot: auth: Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Jul 3 12:27:51 linuxServer dovecot: auth: Debug: auth client connected (pid=23499) Jul 3 12:28:06 linuxServer dovecot: auth: Debug: client in: AUTH#0111#011PLAIN#011service=imap#011secured#011no-penalty#011lip=192.168.1.2#011rip=192.169.1.3#011lport=143#011rport=50438#011resp=<hidden> Jul 3 12:28:06 linuxServer dovecot: auth-worker: Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Jul 3 12:28:06 linuxServer dovecot: auth-worker: Debug: pam(someUserLogin,192.169.1.3): lookup service=dovecot Jul 3 12:28:06 linuxServer dovecot: auth-worker: Debug: pam(someUserLogin,192.169.1.3): #1/1 style=1 msg=Password: Jul 3 12:28:06 linuxServer dovecot: auth: Debug: client out: OK#0111#011user=someUserLogin Jul 3 12:28:06 linuxServer dovecot: auth: Debug: master in: REQUEST#0111823473665#01123499#0111#0113a58da53e091957d3cd306ac4114f0b9 Jul 3 12:28:06 linuxServer dovecot: auth: Debug: passwd(someUserLogin,192.169.1.3): lookup Jul 3 12:28:06 linuxServer dovecot: auth: Debug: master out: USER#0111823473665#011someUserLogin#011system_groups_user=someUserLogin#011uid=1000#011gid=1000#011home=/home/someUserLogin Jul 3 12:28:06 linuxServer dovecot: imap-login: Login: user=<someUserLogin>, method=PLAIN, rip=192.169.1.3, lip=192.168.1.2, mpid=23503, secured

  Read the article

• Shorewall log question.

  - by Shikoru

  I have been getting various attempts to connect to ports on my shorewall firewall. The ports that I keep seeing connection attempts at are tcp 44444, tcp 44446, udp 55555 and every now and then some slight variation. I ran "netstat -a" and did not see anything listening on those ports. Is this something that I should be worried about or is it just some rouge computers out there? I have noticed alot of the ip addresses are from Spain and Mexico. May 25 18:39:35 Takkun kernel: [62516.626514] Shorewall:net2fw:DROP:IN=eth0 OUT= MAC=00:d0:b7:65:d4:13:34:ef:xx:xx:xx:81:08:00 SRC=200.124.9.113 DST=72.xxx.xxx.xxx LEN=48 TOS=0x00 PREC=0x00 TTL=112 ID=51796 DF PROTO=TCP SPT=2071 DPT=44446 WINDOW=16384 RES=0x00 SYN URGP=0 May 25 18:39:52 Takkun kernel: [62535.433285] Shorewall:net2fw:DROP:IN=eth0 OUT= MAC=00:d0:b7:65:d4:13:34:ef:xx:xx:xx:81:08:00 SRC=72.50.95.174 DST=72.xxx.xxx.xxx LEN=90 TOS=0x00 PREC=0x00 TTL=105 ID=31130 PROTO=UDP SPT=59505 DPT=55555 LEN=70 May 25 18:40:05 Takkun kernel: [62548.963413] Shorewall:net2fw:DROP:IN=eth0 OUT= MAC=00:d0:b7:65:d4:13:34:ef:xx:xx:xx:81:08:00 SRC=77.12.37.1 DST=72.xxx.xxx.xxx LEN=90 TOS=0x00 PREC=0x00 TTL=108 ID=9585 PROTO=UDP SPT=20401 DPT=55555 LEN=70 That is the jist of what im seeing.

  Read the article

• Monitor goes black for a few seconds

  - by privatehuff

  I have a Hanns G 28" monitor, Model # HG281D It has its issues (viewing angle sucks) but has been functional and solid, great for desktop stuff. Worked without any sign of any problems for 6-12 months. However, now the monitor "goes black" for about 2-3 seconds, almost like when you click "detect display" It does not turn off (power light does not go amber) The computer is completely unaffected and the video mode never changes when the picture returns. The computer is fully responsive and will keep playing music or taking my keypresses during the time I can't see anything. (it just happened and I kept typing, etc) It happens on multiple computers across several operating systems. (I have an 8-port iogear KVM switch that has several computers connected) But, it seems to happen only on certain computers. I have a hackintosh that does it, a windows 7 PC that does not, a lenovo laptop that does not, and my old ubuntu 8.10 box did not do it, but my new mint 8 box does do it. I've check the connections and tried changing out the power cable and the vga cable. Sometimes it won't happen for hours (or days) and sometimes it happens several times per hour. It was happening many months ago, did not happen for months, and has now started happening again. Does this make any sense? What could it be?

  Read the article

• How to tell statd to use portmap on a non-localhost ipadress?

  - by jneves

  How can I make statd connect to other IP address other than 127.0.0.1? I have a server that is connected to 2 different networks (one is public, another a private). I want it to provide a NFS share for only the private network. The host in an ubuntu 8.04. The private ip address is 192.168.1.202 I changed /etc/default/portmap to add: OPTIONS="-i 192.168.1.202" The command lsof -n | grep portmap returns: portmap 10252 daemon cwd DIR 202,0 4096 2 / portmap 10252 daemon rtd DIR 202,0 4096 2 / portmap 10252 daemon txt REG 202,0 15248 13461 /sbin/portmap portmap 10252 daemon mem REG 202,0 83708 32823 /lib/tls/i686/cmov/libnsl-2.7.so portmap 10252 daemon mem REG 202,0 1364388 32817 /lib/tls/i686/cmov/libc-2.7.so portmap 10252 daemon mem REG 202,0 31304 16588 /lib/libwrap.so.0.7.6 portmap 10252 daemon mem REG 202,0 109152 16955 /lib/ld-2.7.so portmap 10252 daemon 0u CHR 1,3 960 /dev/null portmap 10252 daemon 1u CHR 1,3 960 /dev/null portmap 10252 daemon 2u CHR 1,3 960 /dev/null portmap 10252 daemon 3u unix 0xecc8c3c0 4332992 socket portmap 10252 daemon 4u IPv4 4332993 UDP 192.168.1.202:sunrpc portmap 10252 daemon 5u IPv4 4332994 TCP 192.168.1.202:sunrpc (LISTEN) portmap 10252 daemon 6u REG 0,12 289 3821511 /var/run/portmap_mapping I defined in /etc/hosts the following: 192.168.1.202 server.local In /etc/default/nfs-common I changed STATDOPTS to: STATDOPTS="--name server.local" Yet when I run /etc/init.d/nfs-common start if fails to start. The log shows: Jun 8 06:37:44 cookwork-web1 rpc.statd[9723]: Version 1.1.2 Starting Jun 8 06:37:44 cookwork-web1 rpc.statd[9723]: Flags: Jun 8 06:37:44 cookwork-web1 rpc.statd[9723]: unable to register (statd, 1, udp). An strace -f rpc.statd -n server.local results in a lot of lines, including this one: sendto(9, "\200]3\362\0\0\0\0\0\0\0\2\0\1\206\240\0\0\0\2\0\0\0\1"..., 56, 0, {sa_family=AF_INET, sin_port=htons(111), sin_addr=inet_addr("127.0.0.1")}, 16) = 56

  Read the article

• iptables port forward + nginx redirect problem

  - by easthero

  Here is my network browser = proxy(iptables port forward) = nginx server proxy: 192.168.10.204, forward 192.168.10.204:22080 to 192.168.10.10:80 nginx server: 192.168.10.10 nginx version:0.7.65 debian testing in nginx settings, I set: server_name _; server_name_in_redirect off; because my server has no domain now, access 192.168.10.10/index.html or 192.168.10.10/foobar is ok then access 192.168.10.204:22080/index.html is ok but access 192.168.10.204:22080/foobar, nginx 301 redirect to http://192.168.10.204/foobar how to fix? thanks telnet 192.168.10.204 22080 Trying 192.168.10.204... Connected to 192.168.10.204. Escape character is '^]'. GET /index.html HTTP/1.1 Host: 192.168.10.10 HTTP/1.1 200 OK Server: nginx/0.7.65 Date: Fri, 28 May 2010 10:07:29 GMT Content-Type: text/html Content-Length: 12 Last-Modified: Fri, 28 May 2010 07:25:12 GMT Connection: keep-alive Accept-Ranges: bytes hello world telnet 192.168.10.204 22080 Trying 192.168.10.204... Connected to 192.168.10.204. Escape character is '^]'. GET /test2 HTTP/1.1 Host: 192.168.10.10 HTTP/1.1 301 Moved Permanently Server: nginx/0.7.65 Date: Fri, 28 May 2010 10:04:20 GMT Content-Type: text/html Content-Length: 185 Location: http://192.168.10.10/test2/ Connection: keep-alive <html> <head><title>301 Moved Permanently</title></head> <body bgcolor="white"> <center><h1>301 Moved Permanently</h1></center> <hr><center>nginx/0.7.65</center> </body> </html>

  Read the article

< Previous Page | 310 311 312 313 314 315 316 317 318 319 320 321  | Next Page >