Search Results

Search found 27151 results on 1087 pages for 'end to end'.

Page 315/1087 | < Previous Page | 311 312 313 314 315 316 317 318 319 320 321 322  | Next Page >

• big speed difference on a network link with and without VPN tunnel

  - by xirtyllo

  Scenario: We have a network link between two offices. The link is provided by a third party company through a VLAN on their network, but to us it is totally transparent -as if we had a simple ethernet cable going from one location to the other-. We have one router at each side of the link, with 3 VPN tunnels in between the two. The test: When I test the speed of the network link with the routers in place, with one laptop directly connected to the router on each side, I consistently get ~30/35Mbps. But if I take out the routers and I test the link connecting the laptops directly to the ethernet cable at each side, I consistently get ~85/88Mbps. It's quite a big performance hit, and I would tend to think that the VPN tunnels are responsible for the slow down. Is it normal that this configuration (two routers with three VPN tunnels between them) takes away so much bandwidth? More info: The encryption algorithm used for the VPN tunnels is AES128. The routers model is Zyxel USG200 and Zyxel USG1000, and their CPU, memory, and storage use is well within normal limits. The nominal bandwidth of the network link is 100Mbps. The network link in question is supplied by a third party company (the building in between our two offices). Basically it passes through their network as a VLAN, but the VLAN is completely transparent to us (e.g. no configuration required on our side, just like one single cable from end to end). Unfortunately (or maybe fortunately) I cannot directly test different routers configurations as I'm not the person in charge of it.

  Read the article

• When I log on to my company desktop, I log on to a domain. How is this domain name installed?

  - by learnerforever

  Hi, When I have to work on my machine in company, I have noticed that I log on to a domain (named on the basis of company name) and not really on that computer. From, what I understand, this has a few advantages, the primary being that I just need one password for the domain and can work through any of the machines in company. My questions are : What software on desktop/network have to be installed so that the desktop recognizes and gives me option of logging into a domain. I would guess that a software can be installed on desktop, and there we can configure the IP address of domain server of company and port number, which handles authentication. Is this correct? This takes me to another question that how are softwares installed on end machines in a company. Going to each machine physically and installing looks very unweildy from administrator point of view. An obvious solution would be to install softwares (and updates) over network. My question on this are: What protocols,keywords come into picture when administrator installs OS,softwares,updates from his administrator machine to end machine through network. Thanks,

  Read the article

• Using dnsmasq for accessing multiple nameservers assigned by DHCP

  - by Ash

  At my work desktop running openSUSE 11.4, I have a local network which gets its address, domain (work.site) and nameservers (10.100.1.1, 10.100.1.2) info through DHCP - which get written into /etc/resolv.conf I get to access the internet using the work network, and these 2 nameservers end up returning the entries for any public domain name lookups on the internet. I also have a private VPN that I end up connecting. The nameserver (10.111.1.1) and domain (private.site) are rarely bound to change for this network, but currently they're pushed by the openVPN client into networkmanager, and which also gets merged with the existing /etc/resolv.conf My resolv.conf ultimately ends up looking like this: search private.site work.site nameserver 127.0.0.1 nameserver 10.111.1.1 nameserver 10.100.1.1 As you can see the 2nd nameserver from my work network was pushed out because of the max 3 entry limitations. It is fine still, but would be a problem if that nameserver goes down for maintenance or something. So I found out that dnsmasq could help me here, and hence I setup dnsmasq just as a local DNS resolver without any DHCP support. So right now this is my /etc/dnsmasq.conf: resolv-file=/etc/resolv.conf server=/private.site/10.111.1.1 server=/1.111.10.in-addr.arpa/10.111.1.1 listen-address=127.0.0.1 bind-interfaces log-queries I've made dnsmasq get the list of nameservers from /etc/resolv.conf since NetworkManager seems to be updating this list correctly (for a max of 3 nameservers). I'm able to resolve the host names in both the networks correctly. So these are the questions I have: Is there a way I can make either NetworkManager or dhclient write out the list of nameservers somewhere else which I can make dnsmasq use as resolv-file ? How do I make dnsmasq use certain nameservers as the default for all queries ? Right now I notice that lookups for public domains on the internet are usually sent to both the nameservers - the one on work.site as well as private.site. It would be good if I can limit this only to work.site.

  Read the article

• Why is my cat5e cable not okay?

  - by torbengb

  My LAN cable seems to work (indicator LED lights up) but the computer can't find a connection. What's wrong? Setup: I had to run a network cable from a router in one room to a computer to another room, through a hole in the wall that was too small to pass the RJ-45 plug through. The plug was cut off and the cable passed through the wall. Then a new plug was crimped on using this detailed explanation. The connection didn't work because the (factory-made!) plug in the other end used a non-standard wire order. I crimped a new plug on again, using the exact same order of the factory-made plug. The LED indicator lights up on both ends, but the computer cannot find a connection. What can be wrong? How can I find out? I don't have a cable tester. By visually inspecting my new plug, I think it's good; the wire order matches the other end, and all wires are all the way inside the plug and reach the connector piece. I've used the cable before (with both factory-made ends) so i don't think that the cable itself has a defect.

  Read the article

• Switch Text Paragraphs in OpenOfficeOrg Writer mailmerge

  - by Glen S. Dalton

  I am using mailmerge to write the same letter with minor differenes to many peolpe. I experienced that switching text paragraphs depending on database values was not easy for me. I ended up putting huge text paragraphs into the database becaus switching did not really work for me. Actually I dont' understand how writer does it and maybe the boolean evaluation is buggy? There is some possibility making paragraphs invisible depending on database fields, but it was frustrating. After marking a paragraph as invisible (depending on a condition) it went invisible in the main document and did not come back, I lost the content. An example in pseudocode of what I want in my mailmerge document: {if [[balance]] 10} We owe you money. Please can you send your bank details. {end if} {if [[balance]] < -10} Please transfer the remaining amount to our banc account 123... {end if} Maybe this could be done with makros? But how to combine makros with mailmerge? Can you tell me what are the pitfalls and how to master them? I once did this with ms word, it was a lot easier. The normal mailmerge (including database fields in the letters) works fine for me in OpenOffice writer.

  Read the article

• hMail server - sending copy of an e-mail changing the sender

  - by Beggycev

  Dear All please help me with following request. I am using hMail server in a company(test.com) and have several hundred of guest e-mail accounts ([email protected]). I need to accomplish this: When any of the guest e-mails receives a message(either from internal or external sender) this e-mail(or its copy) is sent to another address "[email protected]" which is the same for all of these guest e-mails. But I need the sender to be identified as the [email protected] not as the original sender which happens when I use forwarding. I tried to prepare a simple VBS script using the OnAcceptMessage event to accomplish this. and it works on my testing machine without internet connectivity but not in the production environment. To be specific, if I send an e-mail to [email protected] in my test env it is delivered to the [email protected] with [email protected] being a sender. But in the production env the e-mail stays in the guest mailbox with the original sender. I am interested in any solution, using a rule in hMail or script, anything is welcome. Thank you for any help! The script: Sub OnAcceptMessage(oClient, oMessage) 'creating application object in order to perform operations as hMail server administrator Dim obApp Set obApp = CreateObject("hMailServer.Application") Dim adminLogin Dim adminPassword 'Enter actual values for administrator account and password 'CHANGE HERE: adminLogin = "Admin_login" adminPassword = "password" Call obApp.Authenticate(adminLogin, adminPassword) Dim addrStart 'Take first 5 characters of recipients address addrStart = Mid(oMessage.To, 1, 5) 'if the recipient's address start with "guest" if addrStart = "guest" then Dim recipient Dim recipientAddress 'enter name of the recipient and respective e-mail address() 'CHANGE HERE: recipient = "FINAL" recipientAddress = "[email protected]" 'change the sender and sender e-mail address to the guest oMessage.FromAddress = oMessage.To oMessage.From = oMessage.To & "<" & oMessage.To & ">" 'delete recipients and enter a new one - the actual mps and its e-mail from the variables set above oMessage.ClearRecipients() oMessage.AddRecipient recipient, recipientAddress 'save the e-mail oMessage.save end if End Sub

  Read the article

• Menu tab completion for recent history in zsh

  - by dat5h

  I am interested in a potential zle widget for zsh. Is there a way to build a widget that mimics the kill-completion selectable menu? Essentially I want to be able to press , tab in vi-command-mode, or maybe !-tab-completion at the shell and get a list of recent history (or related history compared what is already entered at the commandline) that allows me to scroll through it and possibly select a relevant function to call or compare similar calls. Looking through the manual I stumbled onto a similar widget that I have mapped like so: # tab completion history menu (vicmd) autoload -z history-beginning-search-menu zle -N history-beginning-search-menu-space-end history-beginning-search-menu bindkey -M vicmd "\t" history-beginning-search-menu-space-end # emacs binding could be "\e\t"? (I wouldn't know) Therefore, if I enter vicmd and hit tab when I enter something like "grep", then I get a list of all grep calls in history. It also asks me for the list-number and it will perform the numbered item in history. If I enter a space and then try this, it lists ALL of my history history. This is fairly close to what I want, but there are some problems. For example, 1) it prints the entire list of relevant history and does not check the number of lines of the screen so it could easily blow up the space on the terminal; 2) when I type in numbers for selecting an item in history it does not show me the numbers I type, so I may make a mistake and have to start over again; 3) I would love to be able to hook in appearance tweaks. I was wondering if there exists more updated version of this widget or if there is any way to look at the source for kill-completion or history-beginning-search-menu to see if I could think of a way to do it.

  Read the article

• Computer speakers receive radio station signal

  - by squircle

  I have a set of Logitech 5.1 speakers where each speaker and the source plug into the subwoofer. I'm using a Griffin Firewave with output from my MacBook Pro, and output from my custom-built desktop with a switch in the middle (built it myself out of an old Belkin A/B parallel switch). Recently, I've noticed that I can hear a local Punjabi radio station being picked up by my speakers, and the volume of this interference increases as I increase the volume of the speakers. I'm fairly sure that this radio station is at the low-end of the FM spectrum, below 90MHz (or it may be at the high end, above 105MHz, my memory isn't infallible). It gets quite annoying as I can't put my audio very loud without the interference. I've tried to put a ferrite core on the input cable just before the 3.5mm jacks plug into the subwoofer. I don't know if putting the same core around all three of the cables (green, black, orange) would negate the effects, but I'm assuming not. There has been no change. Is there any reason why this would be happening? I'm assuming the interference is coming somewhere between the FireWave and the subwoofer, because the noise gets amplified with volume increases. If anybody has any suggestions, I'd be grateful!

  Read the article

• Create new folder for new sender name and move message into new folder

  - by Dave Jarvis

  Background I'd like to have Outlook 2010 automatically move e-mails into folders designated by the person's name. For example: Click Rules Click Manage Rules & Alerts Click New Rule Select "Move messages from someone to a folder" Click Next The following dialog is shown: Problem The next part usually looks as follows: Click people or public group Select the desired person Click specified Select the desired folder Question How would you automate those problematic manual tasks? Here's the logic for the new rule I'd like to create: Receive a new message. Extract the name of the sender. If it does not exist, create a new folder under Inbox Move the new message into the folder assigned to that person's name I think this will require a VBA macro. Related Links http://www.experts-exchange.com/Software/Office_Productivity/Groupware/Outlook/A_420-Extending-Outlook-Rules-via-Scripting.html http://msdn.microsoft.com/en-us/library/office/ee814735.aspx http://msdn.microsoft.com/en-us/library/office/ee814736.aspx http://stackoverflow.com/questions/11263483/how-do-i-trigger-a-macro-to-run-after-a-new-mail-is-received-in-outlook http://en.kioskea.net/faq/6174-outlook-a-macro-to-create-folders http://blogs.iis.net/robert_mcmurray/archive/2010/02/25/outlook-macros-part-1-moving-emails-into-personal-folders.aspx Update #1 The code might resemble something like: Public WithEvents myOlApp As Outlook.Application Sub Initialize_handler() Set myOlApp = CreateObject("Outlook.Application") End Sub Private Sub myOlApp_NewMail() Dim myInbox As Outlook.MAPIFolder Dim myItem As Outlook.MailItem Set myInbox = myOlApp.GetNamespace("MAPI").GetDefaultFolder(olFolderInbox) Set mySenderName = myItem.SenderName On Error GoTo ErrorHandler Set myDestinationFolder = myInbox.Folders.Add(mySenderName, olFolderInbox) Set myItems = myInbox.Items Set myItem = myItems.Find("[SenderName] = " & mySenderName) myItem.Move myDestinationFolder ErrorHandler: Resume Next End Sub Update #2 Split the code as follows: Sent a test message and nothing happened. The instructions for actually triggering a message when a new message arrives are a little light on details (for example, no mention is made regarding ThisOutlookSession and how to use it). Thank you.

  Read the article

• Resize Debian in VirtualBox

  - by Poni

  I have a VM with one HD of size 3GB and I'd like to enlarge its HD to 7GB. So I execute this command on the host (while guest is shutdown): VBoxManage modifyhd debian.vdi --resize 7168 Then I run the guest, Debian 6, and then: smith@debian6:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 2.8G 2.6G 60M 98% / tmpfs 61M 0 61M 0% /lib/init/rw udev 57M 160K 57M 1% /dev tmpfs 61M 0 61M 0% /dev/shm smith@debian6:~$ sudo parted /dev/sda print Model: ATA VBOX HARDDISK (scsi) Disk /dev/sda: 3221MB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 3035MB 3034MB primary ext3 boot 2 3036MB 3220MB 185MB extended 5 3036MB 3220MB 185MB logical linux-swap(v1) smith@debian6:~$ cat /proc/partitions major minor #blocks name 8 0 3145728 sda 8 1 2962432 sda1 8 2 1 sda2 8 5 180224 sda5 So, no automatic resizing (detection) of the HD/partition (while VirtualBox, in the host, shows it's 7GB now). Ok... Then I do: smith@debian6:~$ sudo resize2fs /dev/sda1 resize2fs 1.41.12 (17-May-2010) The filesystem is already 740608 blocks long. Nothing to do! smith@debian6:~$ sudo parted GNU Parted 2.3 Using /dev/sda Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) select /dev/sda1 Using /dev/sda1 (parted) resize WARNING: you are attempting to use parted to operate on (resize) a file system. parted's file system manipulation code is not as robust as what you'll find in dedicated, file-system-specific packages like e2fsprogs. We recommend you use parted only to manipulate partition tables, whenever possible. Support for performing most operations on most types of file systems will be removed in an upcoming release. Partition number? 1 Start? 0 End? [3034MB]? Here I'm stuck. At the above parted it asks me to resize to 3GB. No point in that, right.. What should I do in order to enlarge this partition?

  Read the article

• Plesk wildcard subdomain not working

  - by avdgaag

  I'm trying to set up a wildcard subdomain on my VPS. Ultimately I want to end up with this: main site: my.domain.tld subdomain: sub1.my.domain.tld - should end up serving my.domain.tld/sub1 I am using plesk 8.6. I have created a DNS A record pointing at my VPS' IP. I have then restarted the DNS server and waited up to 24 hours. But trying ping sub1.my.domain.tld results in an unknown host error. So I know there's more stuff involved, configuring apache etc. But so far, I cannot even get the subdomain working at all, let alone serve up the right content. I have also tried a CNAME record, to no effect. I have also tried creating a regular subdomain with a fixed name, which also does not work. Pre-configured subdomains DO work, like ftp.my.domain.tld or mail.my.domain.tld. I am clearly missing something here, but my hosting provider charges a small fortune for any support request not involving hardware physically burning down, so I'm hesitant to ask them. Any ideas?

  Read the article

• stunnel client uses improper SNI when talking to Apache

  - by Huckle

  I have stunnel listening on port 80 and acting as a client connecting to Apache listening on port 443. Configuration is below. What I'm finding is that if I attempt to connect to localhost:80 the connection is fine but if I connect to 127.0.0.1:80 When I check Apache's logs it indicates that stunnel is using localhost as the SNI both times, but the HTTP request lists localhost in one case and 127.0.0.1 in another. Is it possible to tell stunnel to either use whatever is in the HTTP request or to somehow configure two clients each with different SNI values? stunnel.conf: debug = 7 options = NO_SSLv2 [xmlrpc-httpd] client = yes accept = 80 connect = 443 Apache error.log: [error] Hostname localhost provided via SNI and hostname 127.0.0.1 provided via HTTP are different Apache access.log: "GET / HTTP/1.1" 200 2138 "-" "Wget/1.13.4 (linux-gnu)" "GET / HTTP/1.1" 400 743 "-" "Wget/1.13.4 (linux-gnu)" wget: $wget -d localhost ---request begin--- GET / HTTP/1.1 User-Agent: Wget/1.13.4 (linux-gnu) Accept: */* Host: localhost Connection: Keep-Alive ---request end--- $wget -d 127.0.0.1 ---request begin--- GET / HTTP/1.1 User-Agent: Wget/1.13.4 (linux-gnu) Accept: */* Host: 127.0.0.1 Connection: Keep-Alive ---request end--- edit: Apache Config Nothing out of the ordinary, it's just a virtual host listening to 443 <VirtualHost *:443>

  Read the article

• how to correctly mount fat32 partition in Ubuntu in order to preserve case

  - by Dean

  I've found there are couple of problems might be related how my FAT32 partition was mounted. I hope you can help me to solve the problem. I also included the command I used to help others when they find this post, sorry to those might feel I should use less space. I've the following file structures on my disk dean@notebook:~$ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x08860886 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 13 5737 45978624 7 HPFS/NTFS /dev/sda3 5738 10600 39062047+ 83 Linux /dev/sda4 10601 19457 71143852+ 5 Extended /dev/sda5 10601 11208 4883728+ 82 Linux swap / Solaris /dev/sda6 11209 15033 30720000 b W95 FAT32 /dev/sda7 15033 19457 35537920 7 HPFS/NTFS In the etc/fstab I've got UUID=91c57a65-dc53-476b-b219-28dac3682d31 / ext4 defaults 0 1 UUID=BEA2A8AFA2A86D99 /media/NTFS ntfs-3g quiet,defaults,locale=en_US.utf8,umask=0 0 0 UUID=0C0C-9BB3 /media/FAT32 vfat user,auto,utf8,fmask=0111,dmask=0000,uid=1000 0 0 /dev/sda5 swap swap sw 0 0 /dev/sda1 /media/sda1 ntfs nls=iso8859-1,ro,noauto,umask=000 0 0 /dev/sda2 /media/sda2 ntfs nls=iso8859-1,ro,noauto,umask=000 0 0 I checked my id using id and I've got dean@notebook:~$ id uid=1000(dean) gid=1000(dean) groups=4(adm),20(dialout),24(cdrom),46(plugdev),103(fuse),104(lpadmin),115(admin),120(sambashare),1000(dean) I don't know why with these settings I still have problem of using svn like in this one Thank you for your help!

  Read the article

• Chef: nested data bag data to template file returns "can't convert String into Integer"

  - by Dalho Park

  I'm creating simple test recipe with a template and data bag. What I'm trying to do is creating a config file from data bag that has simple nested information, but I receive error "can't convert String into Integer" Here are my setting file 1) recipe/default.rb data1 = data_bag_item( 'mytest', 'qa' )['test'] data2 = data_bag_item( 'mytest', 'qa' ) template "/opt/env/test.cfg" do source "test.erb" action :create_if_missing mode 0664 owner "root" group "root" variables({ :pepe1 = data1['part.name'], :pepe2 = data2['transport.tcp.ip2'] }) end 2)my data bag named "mytest" $knife data bag show mytest qa id: qa test: part.name: L12 transport.tcp.ip: 111.111.111.111 transport.tcp.port: 9199 transport.tcp.ip2: 222.222.222.222 3)template file test.erb part.name=<%= @pepe1 % transport.tcp.binding=<%= @pepe2 % Error reurns when I run chef-client on my server, [2013-06-24T19:50:38+00:00] DEBUG: filtered backtrace of compile error: /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in []',/var/chef/cache/cookbooks/config_test/recipes/default.rb:19:inblock in from_file',/var/chef/cache/cookbooks/config_test/recipes/default.rb:12:in from_file' [2013-06-24T19:50:38+00:00] DEBUG: filtered backtrace of compile error: /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in[]',/var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in block in from_file',/var/chef/cache/cookbooks/config_test/recipes/default.rb:12:infrom_file' [2013-06-24T19:50:38+00:00] DEBUG: backtrace entry for compile error: '/var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in `[]'' [2013-06-24T19:50:38+00:00] DEBUG: Line number of compile error: '19' Recipe Compile Error in /var/chef/cache/cookbooks/config_test/recipes/default.rb TypeError can't convert String into Integer Cookbook Trace: /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in []' /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:inblock in from_file' /var/chef/cache/cookbooks/config_test/recipes/default.rb:12:in `from_file' Relevant File Content: /var/chef/cache/cookbooks/config_test/recipes/default.rb: 12: template "/opt/env/test.cfg" do 13: source "test.erb" 14: action :create_if_missing 15: mode 0664 16: owner "root" 17: group "root" 18: variables({ 19 :pepe1 = data1['part.name'], 20: :pepe2 = data2['transport.tcp.ip2'] 21: }) 22: end 23: I tried many things and if I comment out "pepe1 = data1['part.name'],", then :pepe2 = data2['transport.tcp.ip2'] works fine. only nested data "part.name" cannot be set to @pepe1. Does anyone knows why I receive the errors? thanks,

  Read the article

• Emails from web site sometimes blank or gibberish

  - by John Gardeniers

  Our company has one web site with an online store based on osCommerce. The system sends emails for various reasons, such as password changes, order confirmations, etc., using PHP's mail() function. We occasionally have customers report that the email they received is either blank (email is plain text format) or gibberish (email is in HTML format). In the latter case it's really just HTML that's being displayed as raw text but of course the customers can't read it. In this case the first opening tag's <, and sometimes a few more characters, has gone missing. In an attempt to determine whether this was happening only for certain customers or email systems I configured the web site to send a CC of each message to a service account at my end. Those CC'd messages always arrive intact and display correctly in Outlook. For what it's worth, it seems to happen a little more frequently to Hotmail users but is certainly not limited to them. As the web site is on a shared (Debian) host there's precious little I can do about debugging things from that end, although if I made the right request I feel the hosting company staff would help me, even though they have limited resources to spend on such matters. Any suggestions on what else I might do to try and determine just why those emails are not being received correctly by some customers, yet a CC copy arrives just fine?

  Read the article

• Pasting formatted Excel range into Outlook message

  - by Steph

  Hi everyone, I am using Office 2007 and I would like to use VBA to paste a range of formatted Excel cells into an Outlook message and then mail the message. In the following code (that I lifted from various sources), it runs without error and then sends an empty message... the paste does not work. Can anyone see the problem and better yet, help with a solution? Thanks, -Steph Sub SendMessage(SubjectText As String, Importance As OlImportance) Dim objOutlook As Outlook.Application Dim objOutlookMsg As Outlook.MailItem Dim objOutlookRecip As Outlook.Recipient Dim objOutlookAttach As Outlook.Attachment Dim iAddr As Integer, Col As Integer, SendLink As Boolean 'Dim Doc As Word.Document, wdRn As Word.Range Dim Doc As Object, wdRn As Object ' Create the Outlook session. Set objOutlook = CreateObject("Outlook.Application") ' Create the message. Set objOutlookMsg = objOutlook.CreateItem(olMailItem) Set Doc = objOutlookMsg.GetInspector.WordEditor 'Set Doc = objOutlookMsg.ActiveInspector.WordEditor Set wdRn = Doc.Range wdRn.Paste Set objOutlookRecip = objOutlookMsg.Recipients.Add("[email protected]") objOutlookRecip.Type = 1 objOutlookMsg.Subject = SubjectText objOutlookMsg.Importance = Importance With objOutlookMsg For Each objOutlookRecip In .Recipients objOutlookRecip.Resolve ' Set the Subject, Body, and Importance of the message. '.Subject = "Coverage Requests" 'objDrafts.GetFromClipboard Next .Send End With Set objOutlookMsg = Nothing Set objOutlook = Nothing End Sub

  Read the article

• ProCurve network expansion

  - by Blue Warrior NFB

  I've hit a bit of a wall with our network scale-out. As it stands right now: We have five ProCurve 2910al switches connected as above, but with 10GbE connections (two CX4, two fiber). This fully populates the central switch above, there will be no more 10GbE Ethernet connections from that device. This group of switches is not stacked (no stack directive). Sometime in the next two or three months I'll need to add a sixth, and I'm not sure how deep of a hole I'm in. Ideally I'd replace the core switch with something more capable and has more 10GbE ports. However, that's a major outage and that requires special scheduling. The two edge switches connected via fiber have dual-port 10GbE cards in them, so I could physically put another switch on the far end of one of those. I don't know how much of a good or bad idea that would be though. Is that too many segments between end-points? Some config-excerpts: Running configuration: ; J9147A Configuration Editor; Created on release #W.14.49 hostname "REDACTED-SW01" time timezone 120 module 1 type J9147A module 2 type J9008A module 3 type J9149A no stack trunk B1 Trk3 Trunk trunk B2 Trk4 Trunk trunk A1 Trk11 Trunk trunk A2 Trk12 Trunk vlan 15 name "VM-MGMT" untagged Trk2,Trk5,Trk7 ip helper-address 10.1.10.4 ip address 10.1.11.1 255.255.255.0 tagged 37-40,Trk3-Trk4,Trk11-Trk12 jumbo ip proxy-arp exit

  Read the article

• Networking Home Office

  - by Matt

  I'm in the process of building an office in my garden. It's about 25m away from my house. I'd like to run a wired network connection to the office. I'd rather not go down the powerline route, as speeds don't seem great, and I'm likely to want to be moving a lot of data around on the internal network. I have an electrician who is running armoured electrical cable to the office, and is providing conduit for me to run network cable. My questions are: 1) What type of cable to run 2) How I terminate/connect it at both ends I could get something like armoured cat6 utp solid core (like this: http://www.netstoredirect.com/cat6-cable/289166-external-armoured-cat6-utp-solid-cable-price-per-metre.html) which seems fairly robust, but then I have to terminate it. Additionally, where the cable enters my house, there is about another 15m to where my router is situated. I also read this artice: http://www.audioholics.com/audio-video-cables/bjc-cat-network-cable-quality-interview which scared me into realising I don't know what I'm doing!! particularly with termination. Or I could get an "cat6 external patch cable" (e.g http://www.netstoredirect.com/rj45-network-cables/239231-external-cat6-utp-ldpe-rj45-patch-leads.html) and run that in the conduit, and work out how to terminate it at the house end. At the office end I guess I can just plug it into a switch. Any help? Thanks

  Read the article

• Router gets disconnected once I terminate my SIP application

  - by TacB0sS

  Hey, Here is an interesting one, I have a SIP VoIP application which is able to register to the PBX server, and I can invite and see the user call on the callee end receiving an Invite, and on the caller end I see the Ringing response... now here is interesting part, if I close my application with out any notification to the server my router disconnects and restart, after a short while (30 - 150 sec). I could fix that if I would complete the ACK BYE process, but I'm just wondering why does my router hangs up? any ideas? My Router is TNN-Siemens SL2-141, thought this might matter Update: this is what I found: SIP ALG allows two or more simultaneous VoIP phone calls made by VoIP clients through this router. which means that if I disable it I would not be able to do the testing I'm trying so badly to do, and since I don't have access to another router, I must handle it with the bug then... I can say that this never happened to me with one user connecting, but then again I didn't have anyone to invite then, I received from the SIP UAS 503 when I tried to invite an imaginary user. This bug only occur after I connected the second SIP UAC and invited it and closed the application. Adam.

  Read the article

• How to recover deleted NTFS partitions?

  - by Frank

  Last night I made a terrible mistake. I was reinstalling Windows and I accidentally deleted all the partitions on all my drives. I realized my mistake before I had created any partitions, so nothing has been written to any of the disks. I'm currently at my wits' end about what I'll do if I don't manage to recover the data. I have two 1TB drives and a 2TB. One of the 1TB was the drive I was supposed to be reformatting so nothing to be recovered there. I am currently in a Linux livecd. In this article http://support.microsoft.com/kb/245725 Microsoft advises to recreate the exact same partition but choose not to format it, and then recover the backup boot sector from the end of the ntfs volume. But none of the drives I want to recover are bootable drives. So does that mean I do not need to rewrite the boot sector? As in if I simply recreate a partition of the same size it will see all my data? Or would I be better off using the TestDisk utility? http://www.cgsecurity.org/wiki/TestDisk Please help, I'm desperate!!

  Read the article

• Vagrant up doesn't load chef configs and doesn't keep an error log

  - by la_f0ka

  I'm trying to set up a vagrant box and I'm running with all sort of troubles. Right now I'm getting a strange error message where it states there's a stack trace file with more info, but that file is no where to be found. This is the error: stdin: is not a tty [Sun, 16 Sep 2012 18:31:47 +0000] INFO: *** Chef 0.10.0 *** [Sun, 16 Sep 2012 18:31:48 +0000] INFO: Setting the run_list to ["recipe[apt]", "recipe[openssl]", "recipe[apache2]", "recipe[mysql]", "recipe[mysql::server]", "recipe[php]", "recipe[php::module_apc]", "recipe[php::module_curl]", "recipe[php::module_mysql]", "recipe[apache2::mod_php5]", "recipe[apache2::mod_rewrite]"] from JSON [Sun, 16 Sep 2012 18:31:48 +0000] INFO: Run List is [recipe[apt], recipe[openssl], recipe[apache2], recipe[mysql], recipe[mysql::server], recipe[php], recipe[php::module_apc], recipe[php::module_curl], recipe[php::module_mysql], recipe[apache2::mod_php5], recipe[apache2::mod_rewrite]] [Sun, 16 Sep 2012 18:31:48 +0000] INFO: Run List expands to [apt, openssl, apache2, mysql, mysql::server, php, php::module_apc, php::module_curl, php::module_mysql, apache2::mod_php5, apache2::mod_rewrite] [Sun, 16 Sep 2012 18:31:48 +0000] INFO: Starting Chef Run for natty.talifun.com [Sun, 16 Sep 2012 18:31:48 +0000] ERROR: Running exception handlers [Sun, 16 Sep 2012 18:31:48 +0000] ERROR: Exception handlers complete [Sun, 16 Sep 2012 18:31:48 +0000] FATAL: Stacktrace dumped to /tmp/vagrant-chef-1/chef-stacktrace.out [Sun, 16 Sep 2012 18:31:48 +0000] FATAL: NameError: wrong constant name Chef-symfony2Console Chef never successfully completed! Any errors should be visible in the output above. Please fix your recipes so that they properly complete. And this is what my vagrantfile looks like: Vagrant::Config.run do |config| config.vm.box = "ubuntu-1104-server-i386" config.vm.network :hostonly, "33.33.33.33" config.vm.forward_port 80, 8000 config.vm.share_folder "symfony.tests", "/var/www/symfony.tests", "data", :nfs => true config.vm.provision :chef_solo do |chef| chef.cookbooks_path = ["../my-recipes/cookbooks", "site-cookbooks"] chef.add_recipe "apt" chef.add_recipe "openssl" chef.add_recipe "apache2" chef.add_recipe "mysql" chef.add_recipe "mysql::server" chef.add_recipe "php" chef.add_recipe "php::module_apc" chef.add_recipe "php::module_curl" chef.add_recipe "php::module_mysql" chef.add_recipe "apache2::mod_php5" chef.add_recipe "apache2::mod_rewrite" chef.add_recipe "Symfony" chef.json = { :mysql => { :server_root_password => 'root', :bind_address => '127.0.0.1' } } end end

  Read the article

• how to cause linux system datetime to run faster than real world datetime?

  - by JamesThomasMoon1979

  Background I want to monitor a running linux system over several days. It's a custom gentoo build and with much custom software on board. This software has ongoing maintenance timers and cron scripts and other clock driven events. I need to verify these scheduled events are working. Problem Waiting for the system to step through daily and weekly activity is a long wait time. And modifying all clock-based timers on the system would be time consuming. Yet, I often want to test a system's end-to-end scheduled activities without waiting a week. Potential Solution Have the linux system under test appear to run through it's daily cycle of activity within just a few hours. My Question for Serverfault Is there a way to cause the system's time to run faster than real world time? My first thought is manipulating the ntp daemon to repeatedly and smoothly increment the clock . Any other ideas? And yes, I know this may have strange side affects. However, the system has no important or time critical interactions with systems outside of itself. And this may be a valuable testing technique.

  Read the article

• Linux centos trouble with egrep command in words folder

  - by seth

  i need the commands to list these things for a class but for the life of me i cannot figure it out if anyone could offer any insight on how to get so specific with the egrep command or just answer the questions it would be highly appreciated some i have already figured out but if they look wrong any corrections may help too List all words that have the letter a followed immediately by the letter z. egrep {a,}{z,} words List all words that have the letter a followed sometime later by the letter z (there must be at least one letter in between). Egrep {a,?,z} words List all words that start with the letter a and end with the letter z. egrep "^a.*z$" words List all five letter words that start with the letter a and end with the letter z. List all words that start with two capital letters followed immediately by at least one lower case letter. List all words with two consecutive a’s or i’s or u’s. Use {2} to denote “two consecutive” and the pipe character, |, to denote “or”. egrep [a|i|o] {2} words List all words that contain a q where the q is not immediately followed by a u. For instance, queen should not be in your list but Iraqi should be. List all entries in the file that contain at least one non-letter.

  Read the article

• Dual booting Linux/Win7, Grub refuses to load Win7

  - by JohnB

  Decided to give Linux Mint a try (Ubuntu's interface annoys me), so I installed it with the intention of dual booting with Windows 7. Installation went fine, but now I can only boot into Linux Mint. Grub lists two Windows 7 menu options, but selecting either of them causes an "unknown file system" error and dumps me into a Grub recovery prompt. There, I have to manually reset the root and prefix options, as they reset hd0,msdos6 when they should be hd0,msdos5. I ran Boot Repair twice, once to fix grub errors, once to rebuild the MBR, but it didn't fix anything. Here is the log: http://paste.ubuntu.com/1029675/ fdisk output: Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 1486249145 743021149 7 HPFS/NTFS/exFAT /dev/sda3 1486249982 1953523711 233636865 5 Extended /dev/sda5 1486249984 1945141247 229445632 83 Linux /dev/sda6 1945143296 1953523711 4190208 82 Linux swap / Solaris grub.cfg: ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 86184D18184D091F chainloader +1 } menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 56D84F84D84F60FB chainloader +1 } ### END /etc/grub.d/30_os-prober ### I have found a few similar troubleshooting guides so far, but so far no amount of updating/configuring Grub has been successful. Last resort is, I suppose, use the W7 recovery disc and start over. Thanks in advance! Linux Mint 13 Maya, 64-bit Windows 7 Home Edition, 64-bit

  Read the article

• SharePoint solution package not deploying to all front-ends

  - by Alex

  I have a WSP that contains a web part. It's being built using WSPBuilder. Most of the time, the WSP deploys perfectly. However, in two of our test environments (and sadly, in production, too) the WSP doesn't deploy properly to all the web front ends. The assemblies make it into the GAC, and the .webpart files get provisioned. The problem is that a tool part that the web part relies on for configuration simply fails to appear. I've determined that every time this has happened, it has been isolated to a single web front end. I've been able to resolve the issue by doing an stsadm -o deploysolution to re-deploy the solution, and in one instance it was resolved by the end user deactivating/reactivating the feature. Unfortunately, though, this has made it impossible to determine if the control isn't being deployed properly, or if it's some other issue. Any thoughts on this? Could it be a problem with the WSP, or is it likely to be environmental?

  Read the article

< Previous Page | 311 312 313 314 315 316 317 318 319 320 321 322  | Next Page >