Search Results

Search found 1565 results on 63 pages for 'ati mobility radeon'.

Page 32/63 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

• How do I hookup a dual video card Crossfire rig to a single monitor?

  - by Alexed

  I just received a new Alienware box preinstalled with two nice shiny ATI 6950 graphics cards. My goal is to use both of them to give me really good resolution and frame rate on my single monitor. There's zero documentation with the Alienware box and nothing I can find online. Do I just plug the monitor into one of the cards, and expect the two cards to do magic internally? The ATI Crossfire website indicates a need for an "external crossfirex connection cable". Do I need to buy one of these? If so, what kind of cable is it? The AMD Catalyst Control Center shows the second card as "Linked" but when I go to the AMD Overdrive section, the second card is at zero temperature, and clock, suggesting it's not actually doing anything. What do I need to do to make use of both cards? Is it something that doesn't kick in until I do something graphically intensive?

  Read the article

• I have problem with pc. Random reboots with post hyper transport sync flood error

  - by user29867

  I have problem with my pc. Random reboots with post "hyper transport sync flood" error. It happens completely random. Most times i watch movie, some times when i play a game, even when i browse internet. My spec are as follow: MB ASUS M4A78-E CPU Phenom II 940 Sapphire Radeon hd4850 Vapor-X RAM OCZ DDR2 PC2-8500 kit 2x2GB PSU CM Real Power M520W CASE CM Centurion 590 Temps of MB, CPU and 4850 are in normal range. MB is hooter, around 60-70°C under load, Radeon 60-65°C under load (playing game for couple hours). CPU dos not past 50-55°C. So i think its not a cooling problem, CM case is pretty good, and have a lots of fans. I try with this memmory: TWIN2X4096-6400C5DHX same problem.

  Read the article

• Xen VGA passthrough: is it possible to have dual GPU's with single monitor

  - by user489481

  I hate dual-booting between Windows when I want to play a game and Linux when I need to work. I don't fancy running Linux in a VM and Wine almost never works for me. So, I'm thinking about buying a new mainboard and CPU that is compatible with Xen's VGA passthrough and HVM virtualization. I want to be able to switch between the Linux Dom0 and Windows DomU with ease, but the problem is I need two GPU's and have only one monitor. Right now I have a nVidia GTX 260 in my PC, but I also have a Radeon 4850 sitting in my closet that I was going to sell. My question is, can I salvage the Radeon card to run the Dom0 and have the nVidia card run the DomU while having some kind of device/software to connect them a single monitor? Power supply and airflow issues aside. If not, what would you suggest? Is this even possible?

  Read the article

• Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe driver tg3 will not install?

  - by Pete

  aries@aries-laptop:~$ sudo ifconfig eth0 up eth0: ERROR while getting interface flags: No such device aries@aries-laptop:~$ lspci -nn 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1705] 00:01.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:9641] 00:01.1 Audio device [0403]: ATI Technologies Inc Device [1002:1714] 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:1709] 00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:170b] 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] Device [1022:7800] (rev 40) 00:12.0 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7807] (rev 11) 00:12.2 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7808] (rev 11) 00:13.0 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7807] (rev 11) 00:13.2 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7808] (rev 11) 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] Device [1022:780b] (rev 13) 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] Device [1022:780d] (rev 01) 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] Device [1022:780e] (rev 11) 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:780f] (rev 40) 00:16.0 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7807] (rev 11) 00:16.2 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7808] (rev 11) 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1700] (rev 43) 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1701] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1702] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1703] 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1704] 00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1718] 00:18.6 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1716] 00:18.7 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1719] 01:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe [14e4:16b5] (rev 10) 01:00.1 SD Host controller [0805]: Broadcom Corporation Device [14e4:16bc] (rev 10) 01:00.2 System peripheral [0880]: Broadcom Corporation Device [14e4:16be] (rev 10) 01:00.3 System peripheral [0880]: Broadcom Corporation Device [14e4:16bf] (rev 10) 02:00.0 Network controller [0280]: Broadcom Corporation Device [14e4:4358]

  Read the article

• Why can't I run Compiz?

  - by jasoncruz98

  I installed Ubuntu 11.10 on my laptop. The main reason I switched to Ubuntu is because I wanted to use Compiz. The first thing I did was to go to Additional Drivers and install ATI/AMD Proprietary FGRLX Graphics Driver. There was also another one available, ATI/AMD Proprietary FGRLX Graphics Driver (post-release updates), but I didn't install that one, because it basically meant the same thing to me as the one I already installed. Next, I went to the ubuntuguide.org Oneiric Wiki http://ubuntuguide.org/wiki/Ubuntu:Oneiric#Compiz_Fusion So I followed the instructions there and ran this command in terminal: sudo apt-get install compiz compizconfig-settings-manager compiz-fusion-plugins-main compiz-fusion-plugins-extra emerald librsvg2-common But then, the terminal window said that the package "emerald" could not be found. So, I ran this command instead: sudo apt-get install compiz compizconfig-settings-manager compiz-fusion-plugins-main compiz-fusion-plugins-extra After that, I installed Fusion Icon by running this command: sudo apt-get install fusion-icon I restarted my computer, searched for Compiz Config Settings Manager, and clicked on it. Then, I activated Wobbly Windows. I logged off and logged back on again, but there was no wobbly windows effect. So I tried clicking on Fusion Icon, but it never started. Can someone please tell me what I did wrong here? Because I see everyone seems to be able to run Compiz except me. I really need to start Compiz, or else I think I'm going to uninstall Ubuntu.

  Read the article

• Low-level GPU code and Shader Compilation

  - by ktodisco

  Bear with me, because I will raise several questions at once. I still feel, though, that overall this can be treated as one question that may be answered succinctly. I recently dove into solidifying my understanding of the assembly language, low-level memory operations, CPU structure, and program optimizations. This also sparked my interest in how higher-level shading languages, GLSL and HLSL in particular, are compiled and optimized, as well as what formats they are reduced to before machine code is generated (assuming they are not converted directly into machine code). After a bit of research into this, the best resource I've found is this presentation from ATI about the compilation of and optimizations for HLSL. I also found sample ARB assembly code. This sort of addressed my original curiosity, but it raised several other questions. The assembler code in the ATI presentation seems like it contains instructions specifically targeted for the GPU, but is this merely a hypothetical example created for the purpose of conceptual understanding, or is this code really generated during shader compilation? If so, is it possible to inspect it, or even write it in place of the higher-level syntax? My initial searches for an answer to the last question tell me that this may be disallowed, but I have not dug too deep yet. Also, along the same lines, are GLSL shader programs compiled into ARB assembly code before machine code is generated, and is it possible to write direct ARB assembly? Lastly, and perhaps what I am most interested in finding out: are there comprehensive resources on shader compilation and low-level GPU code? I have been unable to find any thus far. I ask simply because I am curious :)

  Read the article

• How do I nstall MS Office 2010 via WINE?

  - by Emeris

  I am trying to install MS Office 2010 on Ubuntu 12.04 on my new MacBook Pro (15"). I already read and followed every existing threads on forums and followed every existing tutorial, but my problem seem unique so far, since whichever solution I try, the problem remains. When I launch PlayOnLinux, two boxes appear one after the other (before the latest upgrade of Ubuntu of last week, the second box did not appear, only the first one did); the first one tells me: Error: PlayOnLinux is unable to find 32-bits OpenGL libraries. You might encounter problem with your games." When I close this window, a second one pops up, stating: Error: PlayOnLinux cannot find 7z. You should install it to use PlayOnLinux. Of course, I tried purging PlayOnLinux (uninstalling it and re-installing it). I also tried other versions of PlayOnLinux. Nothing matters: the problem remains. I did not succeed so far to install 32-bits OpenGL libraries, since I have a Radeon graphics card (which seems to be unusual) and I just cannot find these libraries. Once the two "error" boxes are closed, PlayOnLinux is open, but does not seem to work properly; when I try to install Microsoft Office 2010, nothing happens. When I try to close PlayOnLinux, it is even worse: Unity seems unable to close it (I even had a frozen screen when trying to xkill it through the terminal). I am looking forward to any tips that could help. P.S.: 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series]

  Read the article

• double screen in ubuntu 12.04?

  - by johan

  I am using ubuntu 12.04 and my video card is ATI Radeon 5000. I cannot use double screen (extended version). I get this error The selected configuration for displays could not be applied requested position/size for CRTC 148 is outside the allowed limit: position=(1280, 0), size=(1280, 768), maximum=(1440, 1440) I tried all display settings but it does not work. Some outputs from the system settings: root@ubuntu:~# lshw -C display *-display description: VGA compatible controller product: Madison [Radeon HD 5000M Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:46 memory:e0000000-efffffff memory:f0020000-f003ffff ioport:d000(size=256) memory:f0000000-f001ffff root@ubuntu:~# aticonfig --initial Uninitialised file found, configuring. Using /etc/X11/xorg.conf Saving back-up to /etc/X11/xorg.conf.original-0 root@ubuntu:~# cat /etc/X11/xorg.conf Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection I would appreciate any suggestions how to solve the problem. Thank you

  Read the article

• how can I get 32-bit program to run on 64-bit Ubuntu?

  - by Carol

  Sorry to be asking this, but I have read quite a few posts and articles a lot of places wrt the issue I am having, to no avail. I am trying to get a Second Life Viewer (Firestorm) to run, and just keep getting the '64-bit error message' it throws. I have installed every 32-lib I can find, still doesn't work. I think I am surely missing some setting somewhere, or running Firestorm from the wrong place, or something, but I have no idea what. FWIW, Firestorm loads but doesn't behave right in the 32-bit version, either. I have actually tried several linux distros, 32 and 64-bit. Mint 32-bit runs it straight off, and Mint 64-bit throws the '64-bit error'. openSUSE, any version, won't run it at all. Oh, and all the other SL viewers I have tried behave the same way. I am beginning to wonder if my set-up just doesn't like linux. Here is my system info: CPU: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz (2661 MHz) Memory: 4026 MB OS Version: Linux 3.2.0-29-generic-pae #46-Ubuntu SMP Fri Jul 27 17:25:43 UTC 2012 i686 Graphics Card Vendor: ATI Technologies Inc. Graphics Card: ATI Radeon HD 5700 Series I appreciate any help anyone can give me! Thanks so much! Carol :)

  Read the article

• Can't shutdown Ubuntu (Wubi Installation)

  - by zsgre3nd3s7

  I downloaded Ubuntu 12.04 using Wubi. The installation went correctly and everything was working fine until I tried to shutdown. I clicked shutdown and then Ubuntu started shutdown, but as soon as I saw the Ubuntu logo with blank dots under, it froze. I had to perform a hard shutdown. After booting my computer back and going into Ubuntu, I tried shutting it down again but this time it took me on a black page with lots and lots of log writing on the screen and after a little while, it stopped writing stuff. I was able to input characters using the keyboard and everything, but it never shutdown. I had to perform a hard shutdown again. Now it always gives me a Ubuntu logo and freezes. What should I do? I know hard shutdowns are bad and want to avoid them. Is there anyway to make shutdowns work? I tried a reboot and it also froze on the Ubuntu logo. Sony VAIO Model E SVE17115FDB Laptop. Graphic card - AMD RADEON HD 7650M (and it installed correctly in Ubuntu). BIOS - H2O Bios. Processor - Intel i7-3612QM. Edit: I only installed the AMD/ATI proprietary drivers FGLRX, not the AMD/ATI post release drivers because they keep showing an error message. Here is jockey.log. Edit 2: Here is the log that i mentioned before that appeared on my screen, it appeared after i tried reinstalling my AMD driver but failed so i reinstalled the other one. Sorry for the quality i took those pictures with my phone.

  Read the article

• Why are my videos playing speeded up with no audio, but work fine if I log in as a guest?

  - by Martins Kruze

  Since the start of this week I have been experiencing a glitch in the multimedia on my Samsung R518 laptop. I have 2 problems: Videos in every player are speeded up around 2 or 4 times (including youtube.com (both HTML5 and flash variants), any other video on the web and videos on my laptop played by Totem Media Player), exception is VLC player, but 2nd problem does concern even that. There is no sound - simple as that (with or without headphones plugged in). These all problems are now, and has not seen before, I upgraded to Ubuntu 10.10 after it was possible, and from start I didn't have anything from this - it just started in this week. I haven't even putted new software in. I have more or less solved the question (kind of) - I just logged in as a guest - and it all works, but when I make a new user - it does not. Please help me. Some stats below: sudo lshw -c sound *-multimedia description: Audio device product: RV710/730 vendor: ATI Technologies Inc physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:48 memory:cfeec000-cfeeffff *-multimedia description: Audio device product: 82801I (ICH9 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:47 memory:fc200000-fc203fff sudo lshw -c video *-display description: VGA compatible controller product: M92 LP [Mobility Radeon HD 4300 Series] vendor: ATI Technologies Inc physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:46 memory:d0000000-dfffffff ioport:2000(size=256) memory:cfef0000-cfefffff memory:cfe00000-cfe1ffff

  Read the article

• Fix for poor hd playback for 11.04 upwards

  - by mark kirby

  Hi guys ive seen loads of posts on this site about poor 720/1080p playback in recent ubuntu versions I had this problem and fixed it so I thought id share it with everyone.... 1 install mplayer 2 install smplayer frontend {in software center} 3 open smplayer 4 go to "OPTIONS" then "PREFRENCES" then "GENRAL" 5 if you have a nvidia card choose "OUTPUT DRIVER" and select "VDPAU" {for ATI or AMD choose xv (0 - ATI Radeon AVIVO video) I dont know if this will work as my card is nvidia but it should) 6 go to performance on the left hand side and set both local and streaming cache to 99999 (this may also fix dvd playback if you set that cache aswell} 7 check the box for "ALLOW HARD FRAME DROP" and set "LOOP FILTER" to skip only on HD 8 Set the "THREDS FOR DECODING OPTION TO THE NUMBER OF CORES YOUR CPU HAS IF YOU HAVE MORE THAN ONE CPU ADD UP ALL THE CORES FOR BEST PERFORMANCE" 9 Enjoy you HD movies again on ubuntu...... I have a pretty avrage machine heres my spec.... 2x Pentium 4 ht 3 ghz Stock dell power and motherboard GFORCE 310 HDMI 24 inch full HD tv as a monitor so any one with dule core cpu should have no problems getting this to work. hope this helps someone out.

  Read the article

• Dell Upgrade to 12.04 LTS No wifi, graphic card driver and bluetooth Problem?

  - by Mattlinux1

  (Dell inspiron m5040 Upgrade to 12.04 LTS from 11.10 wifi wont work and has two bluetooth icons?) Old title of post! No Wifi/Bluetooth Problem. "Both Fixed", see below comments for bluetooth fix and see bottom answer for wifi fix. My online upgrade of 12.04 LTS, was installed to my laptop the Dell inspiron m5040, when it was done i found that my wifi did not even get picked up anymore and i now have two bluetooth icons at the top?? So what i have been doing for now is at the boot screen. I hit the use previous linux version, this works fine but also has the two bluetooth at the top. Is very thankful for any answers for this fix, Thank You. Ok bluetooth problem solved by – fossfreedom answer by deleting the other bluetooth program running in software center. Now the other problem is Wifi: just have to restart system as it works in previous linux version boot opt, but on the first boot screen opt run ubuntu it will not pick up wifi drivers. Broadcom 802.11 Linux STA wireless driverfor use with Broadcom's BCM4311-, BCM4312-, BCM4313-, BCM4321-,BCM4322-, BCM43224-, and BCM43225-, BCM43227- and BCM43228-basedhardware. And 3D-accelerated proprietary graphics driver for ATI cards. This driver is required to fully utilise the 3D potential of some ATI graphics cards, as well as provide 2D acceleration of newer cards. will not instill is there anyway for me to make a copy of the drivers via usb HDD and then put them on new upgraded version.

  Read the article

• How to help FGLRX detect a device

  - by user113416

  I have HD 4850 card, Ubuntu 12.10 and installed legacy drivers using makson96 ppa. The issue is, that FGLRX can not detect my device and loads vesa bios. I had the same problem on ubuntu 11.10, 12.04 versions. I want to manually help fglrx find a matching device to load as it shoudld do. It is interesting, why does fglrx search for a device in a PCI:0@1:0:1 Bus? in xorg.cof different bus is indicated: Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Radeon HD 4800 Series OpenGL version string: 3.3.11653 Compatibility Profile Context Here is a part of my xorg log: [ 3.846] (II) VESA: driver for VESA chipsets: vesa [ 3.846] (II) FBDEV: driver for framebuffer: fbdev [ 3.846] (++) using VT number 7 [ 3.846] (WW) Falling back to old probe method for fglrx [ 3.883] (II) Loading PCS database from /etc/ati/amdpcsdb [ 3.883] (--) Assigning device section with no busID to primary device [ 3.883] (--) Chipset Supported AMD Graphics Processor (0x9442) found [ 3.884] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found [ 3.884] (II) AMD Video driver is running on a device belonging to a group targeted for this release [ 3.884] (II) AMD Video driver is signed [ 3.884] (II) fglrx(0): pEnt->device->identifier=0xb7791d8f [ 3.884] (WW) Falling back to old probe method for vesa [ 3.884] (WW) Falling back to old probe method for fbdev Thanks in advance.

  Read the article

• Laptop runs HOT after 12.10 upgrade!

  - by dinkelk

  I was running 12.04 for 6 months, my laptop ran almost silently and cool enough to hold on my lap. I updated to 12.10 and now my computer gets too hot to hold on my lap and the fan is constantly running on full blast. This is the output of sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +84.0°C (crit = +99.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +84.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +74.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +72.0°C (high = +86.0°C, crit = +100.0°C) Core 2: +75.0°C (high = +86.0°C, crit = +100.0°C) Core 3: +84.0°C (high = +86.0°C, crit = +100.0°C) radeon-pci-0100 Adapter: PCI adapter temp1: +76.0°C I have an HP Pavilion dv6, i7, amd radeon graphics. Please let me know if you need additional information. What could be different between the two Ubuntu additions that caused such a drastic change? Edit 1: Per @Paul's suggestion, I ran htop to try to narrow down the problem. Here is the result! This is about 10 minutes after boot-up, htop, yakuake, and a chrome page with 1 tab opened to this question are all that I have manually opened. The most taxing program to the CPU is htop itself. I think that the problem must lie elsewhere; my temps are already up to ~65C for the CPU and ~69C for the GPU, with nearly 0% CPU usage.

  Read the article

• Ubuntu sound volume is 40% lower than in Windows

  - by ncomx

  I have 2x 2.1 speakers connected to the computer where I have Ubuntu 12.04 installed. On the software side I've set all the volume controls to 100% with the alsamixer program. The speakers have their own volume control, maintaining those at the same level, and switching between Ubuntu and Windows (XP and 7), on windows the output volume is at least 40% higher, even when having the windows volume control at 50% (without touching the speakers volume control) it's still much higher than the sound on Ubuntu. Why can this be happening? Are there some alternative sound drivers (other than the default ones) I could test to see if it makes a difference? some info about the card: root:$ cat /proc/asound/cards 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xfbff4000 irq 55 1 [Generic ]: HDA-Intel - HD-Audio Generic HD-Audio Generic at 0xfbcfc000 irq 56 root:$ lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 02:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cayman/Antilles HDMI Audio [Radeon HD 6900 Series] I think the one i am using is the Intel one, the other seems to be from the vga card which is an ati radeon 6950. Running gstreamer-properties and switching between alsa, oss, ossv4 and pulseaudio doesn't seem to make any difference.

  Read the article

• OUCH! Laptop running SUPER HOT after 12.10 upgrade!

  - by dinkelk

  I was running 12.04 for 6 months, my laptop ran almost silently and cool enough to hold on my lap. I updated to 12.10 and now my computer gets too hot to hold on my lap and the fan is constantly running on full blast. This is the output of sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +84.0°C (crit = +99.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +84.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +74.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +72.0°C (high = +86.0°C, crit = +100.0°C) Core 2: +75.0°C (high = +86.0°C, crit = +100.0°C) Core 3: +84.0°C (high = +86.0°C, crit = +100.0°C) radeon-pci-0100 Adapter: PCI adapter temp1: +76.0°C I have an HP Pavilion dv6, i7, amd radeon graphics. Please let me know if you need additional information. What could be different between the two Ubuntu editions that caused such a drastic change? Edit 1: Per @Paul's suggestion, I ran htop to try to narrow down the problem. Here is the result! (left side of terminal) (right side of terminal) This is about 10 minutes after boot-up, htop, yakuake, and a chrome page with 1 tab opened to this question are all that I have manually opened. The most taxing program to the CPU is htop itself. I think that the problem must lie elsewhere; my temps are already up to ~65C for the CPU and ~69C for the GPU, with nearly 0% CPU usage.

  Read the article

• Randomly Freezes - How Can I Diagnose the Problem?

  - by j0rd4n

  At random times, Ubuntu 10.04 freezes, and I have to do a hard shutdown. It was upgraded from 9.10 which didn't freeze. First, is this is common problem with a quick answer, and if not, what can I do to diagnose it? I've tried checking application/kernel logs, but nothing gives me a clue as to what caused the problem. My guess, is that since the OS froze, no logs could be updated. Ideas? SOLUTION: Solved it. My particular problem was my graphics card (integrated Radeon 9000 series). netconsole revealed I was getting the error: "reserve failed for wait". After trial-and-error, I manually configured my video card and disabled hardware acceleration. Completely fixed the issue. Here is what I did: Manually Created xorg.conf Ubuntu automatically configures xorg.conf and doesn't use a file. To edit this file, you have to tell Ubuntu to explicitly create one and then edit it. Here are the steps: Restart system Hold Shift as GRUB boots Select root terminal in GRUB login menu Execute: X -config xorg.conf.new Copy: cp xorg.conf.new /etc/X11/xorg.conf Disable Hardware Acceleration The following is specific to my Radeon card, but I'm sure other cards have a similar setup. Edit xorg.conf Find "Device" section for graphics card Uncomment "NoAccel" option and set to "True" Save + reboot Hope that helps.

  Read the article

• How can I extend the desktop onto an external monitor/projector?

  - by hellocatfood

  I've plugged in a projector into my laptop and I'm attempting to extend the desktop onto it (so that I can run a full screen app on the projector and have the controls on my laptop). I'm able to mirror the screens effectively (it does this by default) but I can't extend it. When I untick "Mirror screens" and press apply it asks me to log out and then back in again but it goes back to mirroring the screens. I'm able to extend desktop on to my external monitor at home, just not this projector. Is there a manual way or other way to do this other that through Monitors setting? My computer model is Dell Studio 1555: Pentium Dual Core T4300(2.1GHz,800MHz,1MB), 4096MB 800MHz DDR2 Dual Channel, 512 MB ATI Mobility RADEON HD 4570 using the ATI proprietary driver. My screen resolution is 1366x768 (16:9) The projector that it wont connect properly is a Hitachi CPX3. That page specifies that it's especially designed for projectors that use 16:10 aspect ratio, but considering my external monitor at home uses 4:3 should the differences in aspect ratio matter or be causing this error?

  Read the article

• Random compositing lag

  - by user1020567

  My laptop specs: 512 mb of RAM, out of which 64 mb are shared with an integrated GPU - ATI Radeon Xpress 200 M. Intel 1,6 Ghz Celeron M single-core processor. I've spent months trying to figure out why compositing and effects sometimes lag on any distro I try. Now I've come to realise that no matter what drivers I try (the default ones work for me on pretty much any linux) compositing lag is random. When I used Ubuntu 10.10, for example, sometimes window compositing would lag and sometimes it wouldn't. The PC is able to render those effects so hardware is not the problem. It's completely random and unpredictable - sometimes when I turn on the computer the effects lag horribly and sometimes it's completely smooth. I've also checked startup items and there doesn't seem to be any unnecessary entries. I also tried building my own OS with Arch Linux and the problem persists there, therefore I can only assume that it's a driver issue of some sort. By default there are lots of drivers supplied with linux distributions. Could it be that they're in the way? The ones that I need are ati/radeon (or both? What's the difference between them?) and there seem to be a lot of others... What should I do?

  Read the article

• Using onboard and pci-e graphics card at the same time

  - by Endle

  Hello wonderful people. I know there are several other posts with similar questions. I also know how to use Google. I also have read up on posts discussing bumblebee, crossfire, ati catylist and many other interesting topics. I would just like someone to give me advice on how to use the onboard and pci-e graphics at the same time. I know the computer is capable of doing this. It works in Windows. I can use the VGA and DVI onboard port and the HDMI port of the add on card all at the same time. Works great in Windows 7, In Ubuntu, it seems only one or the other will work. I can use any combination of two displays on either adapter: VGA and HDMI..HDMI and DVI..so forth and so on. I have started experimenting with xorg.conf files, but have not been able to get any of them to work. Here is my last attempt at writing an xorg.conf file: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" LeftOf "Screen0" Screen 2 "Screen2" LeftOf "Screen1" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Device" Identifier "Onboard Video" Driver "radeon" BusID "PCI:01:05.0" EndSection Section "Device" Identifier "Graphics Card" Driver "radeon" BusID "PCI:02:00.0" EndSection Section "Monitor" Identifier "CRT2" Option "VendorName" "ViewSonic" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "DVI1" VendorName "ACR" ModelName "P224W" Option "DPMS" EndSection Section "Monitor" Identifier "DVI2" Option "VendorName" "Acer" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Screen" Identifier "Screen0" Device "Onboard Video" Monitor "CRT2" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1280x1024" EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Graphics Card" Monitor "DVI1" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1920x1080" EndSubSection

  Read the article

• How do I configure an Intel HD Graphics 4000?

  - by derabbink

  First off, please note that last night I already posted this question to a launchpad mailing list, so this could be considered a cross post. However, I think this is a better place to ask the same question The question: How can I configure my Ubuntu 12.04, with upgraded kernel (3.6), to use the Intel HD Graphics 4000 adapter? (Intel HD 4000 is the standard of 3rd gen Intel Core i7 (Ivy Bridge) graphics adapter) Some output: $ glxinfo name of display: :0 X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 154 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 12 Current serial number in output stream: 12 $ cat /etc/X11/xorg.conf this is probably the farthest from what it should be Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Module" Load "glx" EndSection $ lspci I only listed the line I think are relevant. If you want more info in order to help me, please comment :) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 16:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler XT [AMD Radeon HD 6700M Series] 16:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Turks HDMI Audio [Radeon HD 6000 Series]

  Read the article

• Ubuntu 12.04 gets overheated, whereas I have no heating problems on Windows 7 whatsoever

  - by G K

  I bought a new laptop which came pre-installed with Windows 7. I love working on Ubuntu and hence installed it. I can work on Windows for 6 hours at a stretch and feel the laptop being only slightly warm, but 15 minutes into running Ubuntu and my laptop is too hot. The battery also drains out very quickly on Ubuntu. 1.5 hrs of backup on Ubuntu compared to 5-6 hrs on Windows. I previously owned a Dell Inspiron N5010 and everything ran smoothly on that. No heating issues. It came with intel i3 processor. So I'm wondering whether this problem has something to do with the processor? (AMD A8) Specs: HP Pavilion G6-2005AX Laptop (APU Quad Core A8/ 4GB/ 500GB/ Win7 HB/ 1.5GB Graph) 1 GB AMD Radeon HD 7670M Dedicated 512 MB AMD Radeon HD 7640G Graphics Integrated Is there any fix for this problem? Thanks in advance. Edit: I've installed ATI proprietary drivers suggested by Ubuntu.

  Read the article

• Strawberry Perl command line question

  - by Nano HE

  I replaced ActivePerl with Strawberry Perl on my WinXP last week. I found I must run my Perl script with the command of perl myperl.pl; otherwise I only need run myperl.pl before install Strawberry. How can I only run myperl.pl as before? I checked my environment configuration as below. C:\> Path C:\Program Files\ActiveState Komodo Edit 5\;C:\Perl\site\bin;C:\Perl\bin;C:\Perl\bin\;C:\Program Files\CodeSynthesis XSD 3.2\bin\;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem; C:\Program Files\ATI Technologies\ATI Control Panel;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Common Files\Thunder Network\KanKan \Codecs;C:\strawberry\c\bin;C:\strawberry\perl\bin` Strawberry Perl path already listed in the Path value after install successfully. Anything I missed? Thank you for your suggestion.

  Read the article

• Perl execution from command line question

  - by Nano HE

  I replaced ActivePerl with Strawberry Perl on my WinXP last week. I found I must run my Perl script with the command of perl myperl.pl; otherwise I only need run myperl.pl before install Strawberry. How can I only run myperl.pl as before? I checked my environment configuration as below. C:\> Path C:\Program Files\ActiveState Komodo Edit 5\;C:\Perl\site\bin;C:\Perl\bin;C:\Perl\bin\;C:\Program Files\CodeSynthesis XSD 3.2\bin\;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem; C:\Program Files\ATI Technologies\ATI Control Panel;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Common Files\Thunder Network\KanKan \Codecs;C:\strawberry\c\bin;C:\strawberry\perl\bin` Strawberry Perl path already listed in the Path value after install successfully. Anything I missed? Thank you for your suggestion.

  Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >