Search Results

Search found 9125 results on 365 pages for 'boot disc'.

Page 32/365 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

• Minimum size of a boot partition on debian

  - by zebonaut

  I'm setting up an old box with Debian. First etch (4.0), because this is the last version that still had boot floppies, then the box is to be upgraded to lenny (5.0) and squeeze (6.0). Therefore, I will end up having a a couple of different kernel versions in the boot partition. If I don't want to be wasteful and if I end up needing a separate boot partition, how large should it be? I've used 10 MB long ago, but that was woody, and only one kernel in the boot partition, and this seems to be too small for what I want to do now.

  Read the article

• Boot log for Windows XP

  - by JasCav

  Where can I find a step-by-step boot log of my Windows XP machine? I'm looking for something akin to the boot log you would get in Linux (with what is running at what times, how long it is running, etc). I am specifically interested in the what is happening after I get out of initial boot phase (AKA, the Windows XP logo goes away and I move to the generic blue background, and as I log in as a user onto the machine).

  Read the article

• Windows 8 will only recognize the Blu-Ray drive, if the Windows 8 disc is present at boot time

  - by aceinthehole

  If I have the install disc in the Blu-Ray ROM drive at boot time and subsequently remove the disc and replace it with Blu-Ray media, everything functions as I’d expect. However, if I have no media present, or another disc in the drive at boot time, then Windows 8 does not seem to recognize that the Blu-Ray player is even present in the computer. It is not present in My Computer, the Device Manager does not show the player, and scanning for new hardware yields nothing. It seems that the driver is installed and working as expected, but what is it about having the Windows 8 install disc in the drive or not that would cause this kind of behavior?

  Read the article

• GA-P31-S3G motherboard usb flash drive boot

  - by user1048125

  I currently trying to understand if my motherboard supports booting from USB flash drive or not... In motherboard manual it written: "First/Second/Third Boot DeviceSpecifies the boot order from the available devices. Use the up or down arrow key to select adevice and press to accept. Options are: Floppy, LS120, Hard Disk, CDROM, ZIP,USB-FDD, USB-ZIP, USB-CDROM, USB-HDD, LAN, Disabled" Is there way to boot from 8GB USB flash drive?

  Read the article

• Install boot loader with no operating system on hard drive

  - by Jeet Robert

  I am trying to reset — or rather, install — a boot loader on my hard drive. I initially had a Linux distro installed, which I completely wiped out. Now, when I try to install Windows 7 from my USB, my machine says Missing operating System And when I don't boot with USB, it says "bootmgr is missing" So now I am wondering, how I can install a boot loader, so I can install Windows 7?

  Read the article

• How to Create Boot CD

  - by joe

  How to Create boot CD for Dual Booting System? Just consider I am having Windows and Ubuntu, Grup is boot loader. I just want to create Dual Boot CD for the same operation.

  Read the article

• ESXi 4 failed to find boot device

  - by phil

  I had exsi 3.5 running just fine, the upgrade to 4 failed ( i thought it would so everything is backed up ). but it did boot just could not import the data store So i did a fresh install of ESXi 4. Now it says failed to find boot device. Not sure why. i have wiped the disk, the controller is a adaptec 3405, it worked fine in 3.5 and when i upgrade to 4 it did boot. Now it just hangs at loading vfat. then the failed to find boot device. Any ideas?

  Read the article

• How to restore ubuntu boot loader

  - by jack

  Hi I recently installed Ubuntu. It lets me to use GParted to let me take free space from Windows XP partition. After installing Ubuntu, it nicely presents a boot menu that lets me to boot either UBuntu or XP. Now, my XP sucks and I need to remove/re-install it. Then how can I restore the boot menu of Ubuntu? Thank you.

  Read the article

• My PC fails to boot up

  - by hppavillion

  My HP Pavillion entertainment PC dv2000 does not boot up. When I press the power button it turns and reads the CD and all the lights turn up, but does not go into boot mode. What should I do? How do I troubleshoot a PC that won't even boot.

  Read the article

• Strange boot problems on 6 month old setup

  - by Balefire

  I've already exhausted my knowledge on this one, so forgive me if this post is a bit long. I built a computer 6 months ago for my wife and it worked fine until last week. Then it randomly shut down and would lock up while trying to boot on the boot screen. I cleared cmos and it allowed me to do startup recovery, but it "failed to fix the issue" so I reinstalled windows on the HD (moving the old install to windows_old). It worked, so I started installing drivers again, but then when I restarted to finalize installations it locked up again. This time, I took the hard drive and hooked it up to my computer, backed up all her files, and then formatted the hard drive before reinstalling it. (again had to clear cmos to let me boot from disk) It installed windows, I installed drivers, and it worked for a few hours but then died during startup again. So, then I got a new HD, cleared cmos, and installed clean again, with the same result as the time before, it worked for a few hours, installed windows updates, then crashed on the 3rd or 4th time turning it on. I decided next to try reinstalling and then going online to see if there were any updates for the BIOS or drivers on the Motherboard, but now I can't get it to even bring up the boot menu, so now I'm just left wondering was it the motherboard, or is it the CPU, or the RAM? The problem was strangely intermittent so I thought it had to be a software issue, since a hardware issue would ALWAYS fail to boot, right? But now it seems to be a hardware issue, because it's not bringing up anything. Any suggestions? System: Windows 7 64-bit 970A-DS3 Gigabyte Motherboard AMD Phenom II X4 955 Deneb 3.2GHz Quad core Proc GeForce GT 430 (Fermi) 1GB Video Card 500W PSU 2 x G.SKILL Ripjaws X Series 4GB 240-Pin DDR3 1600 RAM

  Read the article

• my HP desktop with Windows Vista wont boot

  - by John

  It continues to loop to a BSOD and I cant get a dos prompt or repair screen, I dont have recovery disks but I have brought up a window, black, with gray title bar that is labeled Edit Boot Options, below that it has Edit Windows boot options for: Windows Vista (TM) Home Premium Path: \WINDOWS\system32\winload.exe Partition:1 Hard Disk: 1549f232 and then it has a place to enter something starting with one of these [ and one or two lines down it has ] what do i enter in this space and is there something i can enter that would help solve my boot up issues

  Read the article

• How much data does windows write on boot

  - by soandos

  This question was inspired by Bob's comment to my answer here. On boot, windows writes files to the hard drive (I imagine this to be the case, as it has a way of detecting if the boot was previously interrupted by a hard power-off, and I am sure many other things). But assuming that there is a "smooth" boot, where there are no error, etc, and no logon scripts that run, and things like that, about how much (a few KB, a few MB, a few GB) data gets written to the drive? For simplicity's sake, assume that: hibernation is turned off windows 7 pagefile is turned off (does this matter right at boot, or only later?) How could one go about measuring this? Are there resources that have this information?

  Read the article

• Boot.ini on Windows Server 2003 R2

  - by Jason H.

  I have a Windows Server 2003 R2 with 48 GB of RAM; server has been running strong for quite some time. Recently our boot.ini was modified causing issues, most likely by our remote administrators. Now the server is only showing 14 GB of RAM. This has caused major performance issues for our end users. Our remote administrators have stated "we don't change the boot.ini settings(switches)". However, I know for a fact that all of the local administrators have not modified the switches (due to lack of permissions). The real question.. Is it possible to "audit" who has modified the boot.ini? If thats not possible, can the boot.ini be set via startup? Any help would be greatly appreciated. This is an ongoing issue that I would love to resolve.

  Read the article

• Windows 7: moved system partition, need to update boot partition

  - by Actorclavilis

  So, I have a decently standard Windows7/Ubuntu dual-boot setup, and (since Ubuntu is my usual operating system) I found I needed to grow my Ubuntu partition and shrink my W7 partition. Originally, my system (500G) looked like this: W7 Boot Partition (1.5G) Ubuntu (around 240G) W7 (same as Ubuntu) (on an extended partition, all by itself) Swap (rest of disk, around 16G) Now I'm no stranger to partitioning and filesystem tools, especially GParted, which I used on a Linux boot disk. After my partition editing, the partitions are laid out the same, except the Ubuntu partition is now 407G and the W7 partition is smaller to compensate. I had supposed, based on http://www.gparted.org/faq.php, that I would be able to run the W7 install disk in recovery mode and have it deal with the rearrangement, then possibly reinstall GRUB or something. Well, now the W7 install disk doesn't even see my W7 installation. All my files are there, the NTFS is perfectly clean, no problems there, but the install disk won't notice it. (Of course, the GRUB entry works fine but the W7 boot partition (which I didn't change) refuses to boot it.) So, basically, any ideas on how to fix this? I don't especially want to rerun the entire install procedure because I'll have a bunch of programs to reinstall (never mind redoing GRUB), but I fear that might be the only option. Thanks.

  Read the article

• Remove dual boot screen

  - by DoubleP90

  some time ago i bought an SSD and since i had to reinstall windows i bought windows 8 with it. I kept windows 7 on my old HDD and i installed Windows 8 on the SSD. For some time i had both, and a dual boot screen would allow me to switch between them. But now i deleted the windows 7 partition and merged it to the partition where i keep all my files, movies etc. But i still have the dual boot screen showing up with windows 8 and windows 7 options. How can i remove the dual boot screen and just make it boot to windows 8?

  Read the article

• How to remove GRUB from dual boot (Debian and Windows XP)

  - by All

  I have a computer witch cannot be boot from CD or USB. I have Debian and Windows XP with dual boot via GRUB. Now I want to uninstall Debian and GRUB and restore the Windows MBR. I can enter boot Debian and Windows OSes, but no boot from CD or USB for recovery. How can I remove GRUb and restore MBR from within Windows XP or Debian? NOTE: I asked this question before, but after accepting the answer, I found that Windows XP does not have fdisk command. However, I think it is too late to continue the discussion there; thus, I asked this brand new question.

  Read the article

• Dualboot 12.04/windows 7 After installation from USB reboot straight to Windows with no option to select ubuntu and no boot loader

  - by Alkatraz

  windows 7 home premium intel i5 2500k CPU ASUSP8Z68-V PRO Motherboard GeForce GTX 570 GPU corsair 120Gb SSD (windows 7 os) WD 1tb HDD I select the USB drive in the BIOS and boot to it and choose install. i select to manually configure partitions, partition the 200gb of unallocated space on my 1Tb HDD into 16Gb swap file 30Gb / extf4 and 154Gb /home extf4. I make sure that the boot loader is installed to corsair 120Gb SSD (where the windows boot is) and installation goes smoothly. When i reboot after install it runs through bios strait into windows. I have tried upwards of a dozen times and i have also tried with linuxmint. I have also redownloaded the ISO and used two different programs to create the live usb. the installation seems to go well as i can see the partitions i have created in the windows device manager after install http://imgur.com/Wp0V1 I currently run lubuntu on my laptop but it is not a dual boot. i'm assuming this is a boot loader issue and i am assuming that inside those partitioned files in my screenshot there is a working OS of ubuntu 12.04 i just have no way of getting to it.

  Read the article

• Grub menu will not show the first time I try to boot my ubuntu server 12.04 after it is shutdown for a long time

  - by user211477

  I am running into a booting issue after installing Ubuntu Server 12.04 LTS. Following is the symptom of the problem. SYSTEM DESCRIPTION: Dual core AMD Athlon 64 3 Disks: two SATA (out of which one is SSD) and one PATA. Using LVM for disk partition management. /boot is not under LVM rest of the partitions are. / is on the SSD BIOS boot sequence is correct and points to the disk with /boot and boot loader is installed on this disk. SYMPTOMS: POST messages Blinking cursor on first line then moves to second line Screen flickers then becomes black Everything is unresponsive, hard reboot POST messages will not show up on screen. Monitor displays powersave message Force shutdown machine again. Shutoff power to machine for a few minutes. Restart machine. POST message show up. Grub menu shows up Ubuntu server 12.04 boots normally. From now on Ubuntu server boots normally until machine is shutdown for a long time (for example, 30 mins) Repeat steps 1 through 13 once the machine is started after a long time. WHAT DID I TRY? I read several posts and have tried: radeon.modeset=0 setting the gfxmode edd=0 nolacpi boot-repair Nothing seems to work. In my search I did see only one post with this same symptom. Unfortunately, I am not being able to locate that post anymore. The interesting fact is that with this same machine configuration, if I install Ubuntu Desktop 12.04 then everything works fine. Any help will be appreciated.

  Read the article

• Ubuntu 13.04 boot into black screen, even after installing nvidia drivers, fail at: "Starting Reload cups, upon starting avahi-daemon..."

  - by Elad92

  I got a new machine with i7 4770k and gefore gtx660. I installed windows and then installed Ubuntu 13.04. In the installation everything went well, after the installation I again boot from the USB and choose try ubuntu, and installed boot-repair because windows automatically boot with no option for ubuntu. After I repaired the boot, I restarted and got into grub, when I chose Ubuntu I got message saying I'm running on low graphics mode and when I pressed ok the screen turned off. I couldn't do anything so I restarted and after reading this post: My computer boots to a black screen, what options do I have to fix it? I got into recovery, selected dpkg and repaired packages. Then I rebooted, and tried to press 'e' and change quiet splash to no splash and nomodeset but unfortunately both of them didn't work, and not the screen didn't get turned off, but I just saw a blank screen. So I rebooted again, entered the recovery, and this time I went to the root shell, and tried to install nvidia drivers from this guide here: http://www.howopensource.com/2012/10/install-nvidia-geforce-driver-in-ubuntu-12-10-12-04-using-ppa/ I rebooted and got the same black screen again (the screen didn't go off, just saw a blank screen). In the grub I see that the kernel is 3.8.0-25. I also checked that the usb files are not corrupted using the check CD from the ubuntu installation screen. I'm really frustrated, I don't know what else can I do. (If someone also knows how can I connect to wifi using the root shell it will be very appreciated, because when I choose the 'enable networking' it again booting me to a black screen. Thanks Edit After digging more, I again boot with nomodeset and saw where is it failing, this is the lines I saw: * Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated [OK] * Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated [fail] I searched for it in google and this is the closest result I got: http://ubuntuforums.org/showthread.php?t=2144261 i didn't find any way to solve it in the internet, from what I understand this is a problem with 13.04. If someone knows how to fix it I will be very grateful. Thanks Edit 2 - 23.6.13 As Mitch suggested, I disabled the avahi-daemon, and when I boot in nomodeset I get the following error: What else can be the problem?

  Read the article

• How do I get rid of the drive mount confirmation question for sshFS on boot?

  - by Dave M G

  With help from this site, I was able to set up an SSHFS connection between two computers on my LAN so that one auto mounts on the other at boot time. Everything works, but there is this annoying confirmation that comes up whenever I boot: An error occurred while mounting /home/dave/Mythbuntu. Press S to skip mounting or M or Manual recovery If I press S, then booting continues, and my drive is mounted as hoped, so it seems like even though I "skipped" it, maybe it tried again and succeeded later in the boot process. I followed the instructions here to set up "if up / if down" scripts, and here is my current /etc/fstab: sshfs#[email protected]:/home/mythbuntu /home/dave/Mythbuntu fuse auto,users,exec,uid=1000,gid=1000,allow_other,reconnect,transform_symlinks,BatchMode=yes 0 0 Although the mounting is working, this step of having to press S every time I boot is obviously kind of a hassle. How do I configure my computer so I don't have to do that, and so that my other computer will still automount?

  Read the article

• Dual booting windows 8/ubuntu 12.04.2, Grub doesn't appear and machine never boot in ubuntu

  - by black sensei

  i got a new ACER predator AG3620-UR308 which came with windows 8, so i wanted to run ubuntu 12.04.2 on it as a dual booting. To be honest, i've been doing dual booting for a while now so, i did the right thing. the box came with 2TB HDD. so i made 4 partitions with a raw partition just after the windows installation partition I always do manual installation so even if ubuntu didn't detect windows 8, it was ok for me. So i created swap area and finished the installation etc....Grub was install on the only drive there which is sda. After reboot, grub doesn't even come up.So it always boot in windows 8. I did repeat the installation process twice and yield same result. which is weird because this method always works for me so far.Even the laptop am using to write this post is a dual booting windows 7/ mint nadia installed the same way. Is there anything new in windows 8 that i didn't make provision for? Before starting the installation, all i read about was that , windows 8 should be installed first and ubuntu after. I went ahead and disable secure boot from the BIOS and enabled CSM (don't even know what it means) according to Acer custhelp site . I boot from USB and did fdisk -l bellow is the result: ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x8c361cb5 Device Boot Start End Blocks Id System /dev/sda1 1 3907029167 1953514583+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdb: 8178 MB, 8178892800 bytes 255 heads, 63 sectors/track, 994 cylinders, total 15974400 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0006a87e Device Boot Start End Blocks Id System /dev/sdb1 * 2048 15972351 7985152 b W95 FAT32 ubuntu@ubuntu:~$ Can anybody shed some light? thank you in advance EDIT Hey, i just did another trial with 13.04 this time and still no luck. bios: secure-boot: disabled enable CSM : always 1-delete previous ubuntu partition and swap area partition.now having free space 2- used usb installer to prepare usb with ubuntu-13.04-desktop-amd64.iso 3- rebooted : liveusb didnt detect windows 8, used something else 4-created partition ext4 for / 5-created partition for swap-area 6- default grub path is /dev/sda and clicked install Acer always boots into windows.

  Read the article

• How to boot into Live USB/CD with UEFI on latest Vaio S series?

  - by user76528

  I am unable to boot from USB/CD into a live Ubuntu session to proceed with install. Esc or F12 didn't work and I can't seem to be able to enter the bios settings. Sony Vaio S w/ Ivy Bridge (just one month old, Insyde H2O EFI?) I have read about: creating /EFI/boot on a fat16 stick http://ubuntuforums.org/showpost.php?p=12071096&postcount=2 installing rEFInd using the Alternate install CD (supposedly in order not to mess with W7 UEFI boot partition) It's pretty clear what I have to do afterwards http://askubuntu.com/a/157062 but I am at loss on how to simply boot into a Live Session then install. Thank you

  Read the article

• How do I boot to a windows recovery partition from GRUB in a Toshiba computer?

  - by Andy Groff

  This should be simple but I cannot figure out how to do it. I've been dual booting ubuntu and vista for a while. About 8 months ago, I realized my windows partition got corrupt and does not boot. This wasn't a problem since I didn't need it anyways, but now I do need windows. Using the disk manager I can see a partition called Toshiba System Volume which is 1.6 GB and one called HDD Recovery which is 7.8 GB. I assume the second one is what I need and i'm not sure what the first one is for. Anyways, how do I boot to this one? Is it a matter of configuring GRUB to boot to it? Once I do boot to it will it let me only reformat my windows partition, or is it going to restore the entire hard drive to factory condition? I assume I'll get the general windows installer which lets me choose the partition but, as you can probably tell, I've never used a recover partition. Should I burn the contents of the partition to a disk and boot to that? Sorry if this is obvious but I'm confused and cannot figure this out.

  Read the article

• Dual boot UEFI Windows 7 and Ubuntu 12.04 (both 64 bits). W7 entry doesn't appear in GRUB

  - by Joe

  After trying to install both OS during 2 days, I'm confused and getting mad... I have SSD 128 GB and HDD 500 GB both empty. My laptop is Asus K55VM. BIOS support UEFI. What I have done: Install new SSD (Samsung 830 128GB) Use GParted on liveCD to create new table of partitions (GPT) and create 3 partitions (in the SSD) for different purposes: Partition 1: 80 GB (w7); Partition 2: 30 GB (Ubuntu 12.04 -Just / -); Partition 3: 10 GB unused (for future extesion of the other partitions) Install Windows 7 (with UEFI) in Partition 1. This create: /dev/sda1 - 100 MB for System (UEFI boot I guess) - FAT32 /dev/sda2 - 100 MB aprox. for MSR /dev/sda3 - 79.800 MB aprox. for Windows7 data In this point everything works fine. I have W7. Now I install Ubuntu 12.04 amd64 (with UEFI) as follows: Install / in Partition 2 - /dev/sda4 30 GB ext4, and in the hdd I install /home and swap. I select bootloader in /dev/sda1 (where it's supposed to be the UEFI boot). I install updates and reboot. Problem: Now just appears grub menu with Ubuntu entries and not Windows 7. Alternative solution found: When I turn on laptop, before loading GRUB I press ESC key and appear BIOS boot, so I can select to boot the Windows partition, Ubuntu partition, DVD, USB, etc... but I think is not the best way to boot different OS. I've tried: sudo update-grub2 with no success. What can I do??

  Read the article

• How do I boot to a windows recovery partition from GRUB on a Toshiba computer?

  - by Andy Groff

  This should be simple but I cannot figure out how to do it. I've been dual booting ubuntu and vista for a while. About 8 months ago, I realized my windows partition got corrupt and does not boot. This wasn't a problem since I didn't need it anyways, but now I do need windows. Using the disk manager I can see a partition called Toshiba System Volume which is 1.6 GB and one called HDD Recovery which is 7.8 GB. I assume the second one is what I need and i'm not sure what the first one is for. Anyways, how do I boot to this one? Is it a matter of configuring GRUB to boot to it? Once I do boot to it will it let me only reformat my windows partition, or is it going to restore the entire hard drive to factory condition? I assume I'll get the general windows installer which lets me choose the partition but, as you can probably tell, I've never used a recover partition. Should I burn the contents of the partition to a disk and boot to that? Sorry if this is obvious but I'm confused and cannot figure this out.

  Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >