Search Results

Search found 1691 results on 68 pages for 'brand'.

Page 32/68 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

• CPU fan making noise. heat sink or replace...

  - by user32185

  CPU fan is making noise ...i figured out reasons: Cable is hitting the fan causing a vibration. And may be also CPU fan is loose causing vibration... suggest options... i cleaned the fan ...but found that there is no heatsink compound /paste between processor and the fan..is it ok ..should i apply heat sink compound. How to correct the cable vibration... My processor is p4 2.4 ghz motherboard intel 845gvsr if i have to buy new fan ..which brand should i go for ..and estimated cost ?!

  Read the article

• HDMI connection does not support HDCP

  - by mroggi

  Hi, My problem: error message when playing blu-ray movies stating that the HDCP encryption could not be established. My setup: A new projector (EPSON EMP TW700) with a HDCP-compliant HDMI port a PC with a brand-new graphics adapter (Sapphire HD 4350 512MB DDR2) supporting HDCP Connection made with a DVI cable (it's installed in my wall) and a DVI-HDMI adapter to connect the projector Latest drivers and software My questions: What can I do to establish the HDCP connection? Would it help to use the HDMI output of the graphics adapter instead of the DVI (could it be that the HDCP chip is only supported on HDMI?) Any other ideas? I am very thankful for any hint.

  Read the article

• Cross-Forest Trust

  - by cdalley

  I am looking at testing a cross-domain trust we can have two domain controllers (with different forests and domain names) setup so we can move everyone onto the new domain. We do NOT run exchange on site and we do not have any links to O365 to AD currently. Onto the problem: I have setup two DCs in a Virtual Machine: They are on the same network 192.168.0.* The Windows 2003 server: Name: OLDSRVR "Clone" of our current Domain Controller IP: 192.168.0.1 Domain: internal.test.com The Windows 2012 server: Name: ADCTEST01 Brand new domain setup from scratch separate to internal.test.com Domain: internal.test2.com IP: 192.168.0.2 OLDSRVR can only see ADCTEST if it has dynamic IP set. If I set a static IP it cannot see it. If I try using the dynamic IP and try to join it gets to the end then complains "??The trust relationship between this workstation and the primary domain failed" Any ideas?

  Read the article

• HD read error while booting linux

  - by sidharth sharma

  I have been dual booting windows 7 and ubuntu on my laptop since the past 3 years and all was working fine until I started getting logs like ata1.00: status: { DRDY ERR } ata1.00: error: { UNC } ata1.00: configured for UDMA/133 sd 0:0:0:0: [sda] Unhandled sense code sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense key: Medium Error [Current][discreptor] I figured it was a hardware problem and ignored it as long as I could until the HD crashed on me. Then I got a brand new HD and put on windows and ubuntu afresh on it but the problem still persists. Any Help?

  Read the article

• Help accessing Beagle over serial with Minicom/GTKTerm

  - by mrgordon

  I am trying to access a brand new Beagle Board from Ubuntu or Mac over serial using the setup seen here: http://specialcomp.com/beagleboard/RevC1.htm I got Minicom and GTKTerm installed on the Ubuntu box. I set up the correct baud rate, turned off flow control, and have tried ttyUSB0 and ttyS0. Once minicom is configured properly, I should just see the init text from the board appear if I have minicom open in terminal while I plug in the board, correct? dmesg shows ttyUSB0 on the computer has been connected to ttyS0 on the beagle.

  Read the article

• How can I check the location of perl and CPAN files?

  - by Rob

  I constantly have to set up new servers for an employer of mine for an exact purpose of his, and as such they all have to be set up in exactly the same way. So I've created a script in PHP that I run from my own box to automatically send over all the relevant files, compile everything, run updates, and everything else. However, for some reason these brand new servers come with perl, which is fine, but they have perl installed in different locations. This makes it a pain for me to copy over Config.pm for CPAN without going in and finding the location manually. Is there perhaps some command I'm unaware of that will hunt down the precise location? If it helps, usually the servers are CentOS 5

  Read the article

• Intel RAID0 on Windows 8 not Displaying Correct Media Type

  - by kobaltz

  I have my primary C Drive which consists of 2 Intel 120GB SSD Drives in a RAID0. I have a clean install of Windows 8 Pro, latest MEI software, latest RST software, latest Intel Toolbox. Prior to this I had installed Windows 8 Pro as an upgrade. When I went into the Optimize Drives while in the Upgrade installation, it showed the Media Types as Solid State Drives. However, now since I am in a brand new install, it is showing the Media Type as Hard Disk Drive. I am worried about this because of the trim not working properly. Before when in the upgrade, it showed SSD as the media type and the Optimize option would perform a manual trim. Unfortunately, my search credentials on Google are so common to many other things (ie Raid0, SSD, Windows 8, Media Type) that all I am finding are useless topics. Before, (found on random site) it showed the Media Type as below

  Read the article

• Burn iTunes playlist to Audio Image

  - by MikeHoss

  I have Snow Leopard on an early model MacBook Pro. The CD Drive has been giving me fits the last few months -- I stick a blank CD in it, and it claims it's bad and spits it out. I can go through a pile of brand-new CD's and it will choose 1 out of 7 that it wants to use, even though all the CD's come from the same package. The rejected CD's work fine on a Linux machine I have. I need to burn an audio CD from iTunes and my thought was: Burn playlist to audio CD Image file (Red Book image?) Copy ISO file to Linux Machine Use Linux machine to burn audio image to a CD But looking around, it doesn't seem that iTunes on OSX will support this. I was wondering if anyone else has accomplished this.

  Read the article

• Problems with Black Box KVM

  - by MrWizard54

  I just recieved a shipment of equipment orderd by my predicessor that includes brand new Dell Optiplex 990 computers, with standard mice and keyboards. Also included were Black Box ServSwitch Secure KVMs. I've worked with KVMs before and hypothetically they should be the easiest thing in the world to deal with, plug it all together, push the button, go. However, for the life of me I can't get the computers to recognize the mouse or keyboard when plugged into the KVM. We've seen this with multiple KVMs across the order. Any one know what I'm missing? Computers are all Dell 990 with Windows 7.

  Read the article

• smartOS HPC config suggestion

  - by Andrew B.

  I'm configuring a brand new HPC server and am interested in using SmartOS because of it's virtualization control and zfs features. Does this configuration make sense for a SmartOS HPC, or would you recommend an alternative? System Specs: 2x 8-core xeon 384 GB RAM 30 TB HDs with 2x512GB SSDs Uses: - zfs for serving data to different vms, and over the network; 1 SSD for L2ARC and 1 for ZIL - typically 1-2 ubuntu instances running R and custom C/C++ code My biggest concerns as a newbie to SmartOS and ZFS are: (1) will I get near-metal performance from ubuntu running on SmartOS if it is the only active vm? (2) how do I serve data from the global zfs pool to the containers and other network devices?

  Read the article

• File corruption

  - by firesoul

  Recently, almost every file I try to copy into my HDDs gets corrupted. When writing to the disk, some portion of the file is replaced by random bytes (Checked using Diff apps) There's no problem reading existing files. I'm pretty sure it's not the HDD, becasue I've tried another HDD (a brand new 1TB WD) and the problem still remains. I have an AMD Athlon 64 X2 CPU, an ASUS M2NE motherboard, 2 WD SATA II HDDs (320GB + 1TB) and 3GB of Corsair RAM. My OS is Windows 7 (64 bit) Now, what could be the cause of this? If it's the motherboard, can it be fixed by using a PCI SATA card?

  Read the article

• Best way to deploy my node.js app on a Varnish/Nginx server

  - by Saif Bechan

  I am about to deploy a brand new node.js application, and I need some help setting this up. The way my setup is right now is as follows. I have Varnish running on external_ip:80 I have Nginx behind running on internal_ip:80 Both are listening on port 80, one internal port, one external. NOTE: the node.js app runs on WebSockets Now I have the my new node.js application that will listen on port 8080. Can I have varnish set up that it is in front of both nginx and node.js. Varnish has to proxy the websocket to port 8080, but then the static files such as css, js, etc has to go trough port 80 to nignx. Nginx does not support websockets out of the box, else I would so a setup like: varnish - nignx - node.js

  Read the article

• FreeNAS/ZFS/Raid-Z slightly different disks

  - by muskratt

  I'm considering using FreeNAS and "recycling" some of my older 1TB disks. Two are the exact same model Western Digital while another is Seagate and the fourth is Samsung. Typically, since all disks are not equal, I'll create my arrays on a Windows-based server 1GB undersized to prevent a replacement disk not being large enough. Dell is notorious for sending replacement SATA disks of different brand---knock on wood, no problems yet. Since not all drives are created equally and they can vary a few MBs, is there a way to make the the FreeNas/ZFS/Raid-Z function in the same way I do for my Windows-based servers above? Thanks

  Read the article

• Another "Trouble copying music files from HD to 16GB thumb drive"

  - by Ron

  I have a brand new HP Quad Core - 6GB Ram - running 64-bit Windows 7. Running Norton Internet 2010. I try copying music files from HD to 16 GB thumbdrive and get blue screen after a few files have transfered over to thumbdrive. Computer blinks once and boom - blue screen and then reboots. This is really aggravating. I stopped anti-virus, pulled other USB attached devices - still does same thing. Any solutions out there?

  Read the article

• Fresh Apache install can't be connected to

  - by Wayne M

  I've got to be missing something here. I have a brand new CentOS server with a LAMP install on it. My domain host (GoDaddy) has the server's IP address configured as the "A Record". Since the server will host subdomains I have enabled NameVirtualHost and set up a virtual host pointing to the web app on the server. I haven't touched anything else in Apache, and it's listening on Port 80 like it should be. However, I can't connect to the server either by DNS or by IP address. I've set up several servers exactly like this one and never run into this before. What could be causing this? Did someone on the host set up a firewall or something that blocks port 80? As I said, I can't connect to the server via anything, but it's a barebones box with LAMP installed on it.

  Read the article

• Windows 7 clean install, freezes when starting programs

  - by madmaze

  Hello Everyone, I have a problem on a brand new Windows 7 Lenovo T510 intel I5/4gb ram. When I got the Laptop, right off the bat i noticed that it would freeze up often on th most simple tasks. After a while I got fed up and reinstalled. All that is installed currently is AVG/Firefox/Office. I Rebooted after installing those things and when I try to open Firefox it freezes just trying to open. Ive tried a few other things and it freezes all the time. Any Ideas what it could be?

  Read the article

• iPhone not detected by mac

  - by George

  My Mac doesn't recognize my iPhone when I plug it. Here is the configuration: (basically everything is updated) 10.6.4 mac system (Snow Leopard) XCode version 3.2.5 iTunes 10.1.2 iPhone 4 , 16 GB, iOS version 4.2.1 I tested for a few days with no problems but now it does not recognize it anymore. My provisioning profiles are brand new. It's not detected in iTunes, nor in the XCode Organizer. First it told me that there is no provisioned iOS Device connected. I deleted the iPhone from the Organizer and hoped it would get recognized again, but that didn't happen. I tried restart everything (Mac/iTunes/XCode/iPhone), but nothing worked. Do you have any ideas? I would be more interested in making it work with XCode right now. I don't really care about music and stuff.

  Read the article

• Java Development in Linux

  - by Zac

  I'm a developer and am brand new to Linux (Ubuntu): I'm wondering what the "best practices dictate" for what FHS directories to install various tools to. Things I'll be installing: Eclipse & plugins GlassFish SVN ...etc. I see that /opt is for holding additional ("optional") software packages, but also see /usr as a place for utils and apps. In another post a user recommended I create an entire partition for /srv alone, and to do my staging there (I assume he meant that /srv is where GlassFish and other servers should go?). So basically: what FHS directories do Linux developers use for which type of tools? Thanks for any input here

  Read the article

• further troubleshooting on a p8z77 motherboard

  - by Journeyman Geek

  I just bought a brand now asus p8z77 motherboard with a intel 3770. Its currently not booting - the system powers up for half a second and then powers down, and the CPU error light shines. I've tried switching ram between slots, switching PSUs, updating the bios (which can be done sans processor or ram on this model). Power: The 8 pin power connector is definitely in place correctly, and I've tried swapping PSUs between a new seasonic m12, and a known good cheapie PSU Ram: Ram is in the recommended slot for single stick operation, and tried swapping between the two sticks of DDR3 I have. Processor: Its installed correctly as far as I can tell, no obvious bent pins on the motherboard. At this point I'm guessing I'll need to RMA something. Are there any 'definitive' tests I can try, short of swapping CPU and motherboard that would let me know it is the CPU? Can I actually trust the error light on the motherboard?

  Read the article

• Windows 7 Natively on Mac OS X Bootcamp, Airport Wifi Unable To Connect

  - by Goober

  I am using a brand new MacBook Pro. I am running a copy of Windows 7 natively via bootcamp (No use of Virtual Machine Software at all). However the only way I can get Windows to connect to the internet is via ethernet, as opposed to the Macs Airport card picking up the wireless. It just refuses to connect, and gives me a limited access status. Any ideas!? I've run Windows XP natively via bootcamp and I had a few issues with the network constantly dropping out, however I blamed that on the drivers and the general shiteness of XP.... Help greatly appreciated.

  Read the article

• Converting or playing a .264 video file?

  - by Dan

  I recently bought a Chinese brand DVR (to record security cams). The DVR exports the video files with a ".264" extension. This is my first time ever dealing with this video format. Anyhow I've been trying to convert the videos to any other format so it will be easier to watch the videos. The problem is that I could only find one program that can convert and play those files which is Elecard studio something, and even that Elecard studio thing is having trouble with these files, some of them are just making it crash so I can't convert them. I've tried to find some other programs but I couldn't find anything that can actually play those files. How can I play or convert these files to another format?

  Read the article

• 'DNS service isn't responding' in windows 7

  - by pradeeptp

  Hi All, I bought a brand new Dell Studio 1558 just last week. It has windows 7 home premium 64-bit installed on it. My friend who is occupying the adjacent room has a laptop with windows XP. Both of us are connecting to the same wireless router of the hotel. My friend is able to connect to the wireless network without any trouble, but when I try to connect, I get the error "DNS service isn't responding". I met two more people in the same hotel with win XP laptop and they too dont have any problem. I have gone to possibly all the forums and website but I haven't been able to fix this error :(. I have done all the basic troubleshooting but I have no luck yet. Pls help. Following is one forum where the problem seem to have been trouble shooted but not for all. http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/eeb84518-903d-46d1-9398-80cf211878d7

  Read the article

• VMware - Broadcom 1000Gbps NIC does not link at 100Mbps to a Cisco switch port

  - by Spirit

  Today we've stumbled on a very awkward situation with our VMWare Server. The server is with ESX 3.5 that has a 1Gbps NIC. We bought a brand new managed Cisco Linksys switch with 10/100Mbps interface ports but when we plugged the cable in one of the ports the link simply does not wanted to activate :S... Does anyone with more VMware experience have ever had similar problem? From what I know is that 1Gbps NICs are backwards compatible with 100Mbps switches. This is what we've tryed so far but with no success: Tryed: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004089 Tryed to modify the /etc/modules.conf folowing the guide from this article http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=813 After the changes I have restarted the networking services using # service network restart, # service mgmt-vmware restart and # service vmware-vpxa restart It seems that no matter how many times, or whatever approach/method (GUI or Shell) we try to change the speed and duplex of the network adapter and to force it to 100mbps it only accepts 1Gbps .. I am starting to go nuts :@

  Read the article

• Fresh install of Xenserver 6.2 , cannot load tools in Guest Win7

  - by Erik

  I've just started testing the XenServer 6.2 offering.. it's awesome so far.. I've event loaded all the patches and hot fixes, and started a windows 7 guest image. I want to install tools, but whenever I click the install tools boxes.. I'm taken to my VM console and nothing loads. It's a brand new guest, and most of the advice is for those with previous versions of tools loaded. Any ideas how to fix this?

  Read the article

• Does my DLink DNS-323 need to reside on a "192.168.0.0/24" subnet?

  - by Raymond

  I've installed two brand new 2-tib drives in the DLink and plugged it in to my network. I set my router's static address table to include the MAC address of the device; however it doesn't ever "show up." Do I need to use the custom software to administer this device? Do I need to use a "192.168.0.0/24" network in order for this device to work (asking because it states that if DHCP isn't detected, it will default to an address in that range; and my network is not in that range).

  Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >