Search Results

Search found 6301 results on 253 pages for 'cd man'.

Page 32/253 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

  • Ruby 1.9.3 - Bundler - Graylog2

    - by Arenstar
    im having a strange problem with bundler. Using ruby 1.8 the following works fine however not with 1.9 it always results in Could not find rake-0.9.2.2 in any of the sources Run `bundle install` to install missing gems. i dont understand why, but it functions correctly with rvm. I can not however use rvm, this is not a solution to my problem Install Ruby cd /usr/local/src wget http://ftp.ruby-lang.org/pub/ruby/1.9/ruby-1.9.3-p194.tar.gz tar xzf ruby-1.9.3-p194.tar.gz && cd ruby-1.9.3-p194 ./configure --prefix=/opt/lp/ruby-1.9.3-test make all && make install Install Graylog cd /usr/local/src wget https://github.com/downloads/Graylog2/graylog2-web-interface/graylog2-web-interface-0.9.6p1.tar.gz tar xzf graylog2-web-interface-0.9.6p1.tar.gz cd graylog2-web-interface-0.9.6p1 Setup Graylog cd /usr/local/src/graylog2-web-interface-0.9.6p1 sed -i "3 i gem 'thin', '~> 1.3.1'" Gemfile /opt/lp/ruby-1.9.3-test/bin/gem install bundle /opt/lp/ruby-1.9.3-test/bin/bundle install --path vendor/bundle --binstubs Begin the Test cd /usr/local/src/graylog2-web-interface-0.9.6p1 /opt/lp/ruby-1.9.3/bin/bundle exec bin/rake #Could not find rake-0.9.2.2 in any of the sources #Run `bundle install` to install missing gems. cd /usr/local/src/graylog2-web-interface-0.9.6p1 /opt/lp/ruby-1.9.3/bin/bundle exec bin/thin -e production -S test.sock -c . -R config.ru start #Could not find rake-0.9.2.2 in any of the sources #Run `bundle install` to install missing gems. Where am i going wrong?

    Read the article

  • How to Find Out Who Made an ISO Disk?

    - by Qwertyfshag
    If a file is saved using Microsoft word or some other type of program, you can right click on the file to find the properties, which will indicate the computer that created the file. Is there anyway to find out who created an ISO disk image on a CD or DVD? I assume that there should be no meta data on the disk because an ISO disk image should be an exact duplicate of the original. Is my assumption correct? To illustrate with an example, let's say you found a CD at a cafe or something. You decide to look at the CD with your computer. You find out that it is an "Ubuntu live CD" that was obviously created from an ISO file. Is there any way to find out who burned the CD? Or, on the flip side, let's say you were the one that burned the "Ubuntu live CD" and you lost it. Would somebody be able to know that it was you who made the CD? Can they get any info about the maker?

    Read the article

  • How can I tell what error grub has when I can't read what it's saying?

    - by RolandiXor - The Ice Man
    Grub won't allow me to get into any systems on my HP dv7 (it runs 12.10). As the screen is broken, I can't read what the error is. Nothing works, not even the recovery mode. It gives me some error about "cannot find" (I think) and Press any (I guess key?) When a press a key I'm dropped back to the menu. At the moment I'm trying all the recovery options I know. However, it would be great if someone could tell me how to know what error grub is facing from a live cd or something (maybe a log file or something could help)? NB: I can view the filesystem from a liveCD, and I did check the filesystem - it was clean.

    Read the article

  • Using Windows 8 with Bootcamp?

    - by Farhad Yusufali
    I am trying to install Windows 8 using Bootcamp on OSX Mountain Lion. I need a bootable CD. Does the bootable CD have to be the size of the ISO image or can it be smaller (since it only contains the installer)? If it does not in fact have to be the size of the ISO image, what's the minimum required size of the CD I insert into my drive to create a bootable CD? (i.e. the minimum size of a bootable USB is 8GB)

    Read the article

  • I added __git_ps1 to my PS1 in .bash_profile, now I'm getting (master) for all folders that aren't git repos.

    - by Matthew
    I'm on a Mac (10.6.5). Here's an example of what's going wrong: [m@m ~ (master)]$ cd ~/Documents [m@m ~/Documents (master)]$ cd ~/Applications [m@m ~/Applications (master)]$ cd ~/Library [m@m ~/Library (master)]$ cd ~/Sites/somesite [m@m ~/Sites/somerepo (FEATURE_SOMEFEATURE)]$ Here's the relevant contents of my .bash_profile: source ~/.git-completion.bash PS1='[\u@\h \w$(__git_ps1 " (%s)")]\$ ' I'm using the standard git-completion script - I just copied it to my home directory.

    Read the article

  • Why is the meaning of “ours” and “theirs” reversed with git-svn

    - by Marc Liyanage
    I use git-svn and I noticed that when I have to fix a merge conflict after performing a git svn rebase, the meaning of the --ours and --theirs options to e.g. git checkout is reversed. That is, if there's a conflict and I want to keep the version that came from the SVN server and throw away the changes I made locally, I have to use ours, when I would expect it to be theirs. Why is that? Example: mkdir test cd test svnadmin create svnrepo svn co file://$PWD/svnrepo svnwc cd svnwc echo foo > test.txt svn add test.txt svn ci -m 'svn commit 1' cd .. git svn clone file://$PWD/svnrepo gitwc cd svnwc echo bar > test.txt svn ci -m 'svn commit 2' cd .. cd gitwc echo baz > test.txt git commit -a -m 'git commit 1' git svn rebase git checkout --ours test.txt cat test.txt # shows "bar" but I expect "baz" git checkout --theirs test.txt cat test.txt # shows "baz" but I expect "bar"

    Read the article

  • Can I have a shell alias evaluate a history substitution command?

    - by Brandon
    I'm trying to write an alias for cd !!:1, which takes the 2nd word of the previous command, and changes to the directory of that name. For instance, if I type rails new_project cd !!:1 the second line will cd into the "new_project" directory. Since !!:1 is awkward to type (even though it's short, it requires three SHIFTed keys, on opposite sides of of the keyboard, and then an unSHIFTed version of the key that was typed twice SHIFTed), I want to just type something like cd- but since the !!:1 is evaluated on the command line, I (OBVIOUSLY) can't just do alias cd-=!!:1 or I'd be saving an alias that contained "new_project" hard-coded into it. So I tried alias cd-='!!:1' The problem with this is that the !!:1 is NEVER evaluated, and I get a message that no directory named !!:1 exists. How can I make an alias where the history substitution is evaluated AT THE TIME I ISSUE THE ALIAS COMMAND, not when I define the alias, and not never? (I've tried this in both bash and zsh, and get the same results in both.)

    Read the article

  • Perl: Compare and edit underlying structure in hash

    - by Mahfuzur Rahman Pallab
    I have a hash of complex structure and I want to perform a search and replace. The first hash is like the following: $VAR1 = { abc => { 123 => ["xx", "yy", "zy"], 456 => ["ab", "cd", "ef"] }, def => { 659 => ["wx", "yg", "kl"], 456 => ["as", "sd", "df"] }, mno => { 987 => ["lk", "dm", "sd"] }, } and I want to iteratively search for all '123'/'456' elements, and if a match is found, I need to do a comparison of the sublayer, i.e. of ['ab','cd','ef'] and ['as','sd','df'] and in this case, keep only the one with ['ab','cd','ef']. So the output will be as follows: $VAR1 = { abc => { 123 => ["xx", "yy", "zy"], 456 => ["ab", "cd", "ef"] }, def => { 659 => ["wx", "yg", "kl"] }, mno => { 987 => ["lk", "dm", "sd"] }, } So the deletion is based on the substructure, and not index. How can it be done? Thanks for the help!! Lets assume that I will declare the values to be kept, i.e. I will keep 456 = ["ab", "cd", "ef"] based on a predeclared value of ["ab", "cd", "ef"] and delete any other instance of 456 anywhere else. The search has to be for every key. so the code will go through the hash, first taking 123 = ["xx", "yy", "zy"] and compare it against itself throughout the rest of the hash, if no match is found, do nothing. If a match is found, like in the case of 456 = ["ab", "cd", "ef"], it will compare the two, and as I have said that in case of a match the one with ["ab", "cd", "ef"] would be kept, it will keep 456 = ["ab", "cd", "ef"] and discard any other instances of 456 anywhere else in the hash, i.e. it will delete 456 = ["as", "sd", "df"] in this case.

    Read the article

  • How can invoke a shell to make a new environment to run a make inside another make?

    - by WilliamKF
    I would like in my GNUmakefile to have a target rule that invokes a new shell and then with the clean slate of the new shell invokes a new make. What is the syntax to do this? I tried this but it didn't work: .PHONY: setup setup: shell cd myDir; make; cd .. It gets infinite repeat of the following error: make[1]: Entering directory `/disk4/home/user/parent' shell cd myDir; make; cd .. /bin/sh: shell: command not found make[1]: Entering directory `/disk4/home/user/parent' shell cd myDir; make; cd .. /bin/sh: shell: command not found [...]

    Read the article

  • case-insensitive matching in xpath?

    - by Ethan
    For example, for the xml below <CATALOG> <CD title="Empire Burlesque"/> <CD title="empire burlesque"/> <CD title="EMPIRE BURLESQUE"/> <CD title="EmPiRe BuRLeSQuE"/> <CD title="Others"/> <CATALOG> How to match the first 4 records with xpath like //CD[@title='empire burlesque']. Is there xpath function to do this? Other solutions like PHP function are also accepted.

    Read the article

  • gitk without X11 [closed]

    - by svnpenn
    It has been noted here that Tcl/Tk, and in turn gitk now require X11 under Cygwin. Having run it before and after this change it seems like extreme overkill. I use gitk very lightly, mostly sticking to simply command line git. How could I go about using gitk without X11, perhaps manually installing old version of Tcl/Tk? After some tinkering, I came up with this script that allows gitk without X11 #!/bin/sh # Requires Cygwin packages: git, make, mingw64-i686-gcc-core, wget # Install Tcl wget prdownloads.sf.net/tcl/tcl8.5.12-src.tar.gz tar xf tcl8.5.12-src.tar.gz cd tcl8.5.12/win ./configure --host i686-w64-mingw32 make install cd - # Install Tk wget prdownloads.sf.net/tcl/tk8.5.12-src.tar.gz tar xf tk8.5.12-src.tar.gz cd tk8.5.12/win ./configure --host i686-w64-mingw32 make install cd - # Install gitk cd /usr/local/bin wget raw.github.com/git/git/master/gitk-git/gitk chmod 700 gitk echo 'cygpath -m "$1" | xargs -I% wish85 % -- ${@:3}' > wish cd -

    Read the article

  • Vim: `cd` to path stored in variable

    - by tsyu80
    I'm pretty new to vim, and I'm having a hard time understanding some subtleties with vim scripting. Specifically, I'm having trouble working with commands that expect an unquoted-string (is there a name for this?). For example cd some/unquoted/string/path The problem is that I'd like to pass a variable, but calling let pathname = 'some/path' cd pathname will try to change the current directory to 'pathname' instead of 'some/path'. One way around this is to use let cmd = 'cd ' . pathname execute cmd but this seems a bit roundabout. This StackOverflow question actually uses cd with a variable, but it doesn't work on my system ("a:path" is treated as the path as described above). I'm using cd as a specific example, but this behavior isn't unique to cd; for example, the edit command also behaves this way. (Is there a name for this type of command?)

    Read the article

  • Installed Perl DBI Module Can't Be Found

    - by Russell C.
    I'm trying to setup a Perl development environment on my Mac laptop and have been having a really hard time getting it working. I thought I had everything configured correctly but when I try to run a sample script it is reporting errors with the DBI module and can't access the DB. Here is what is reported in the Apache error logs: [Fri Apr 30 23:11:33 2010] [error] [client 127.0.0.1] Can't locate DBI.pm in @INC (@INC contains: /Library/Perl/Updates/5.10.0/darwin-thread-multi-2level /Library/Perl/Updates/5.10.0 /System/Library/Perl/5.10.0/darwin-thread-multi-2level /System/Library/Perl/5.10.0 /Library/Perl/5.10.0/darwin-thread-multi-2level /Library/Perl/5.10.0 /Network/Library/Perl/5.10.0/darwin-thread-multi-2level /Network/Library/Perl/5.10.0 /Network/Library/Perl /System/Library/Perl/Extras/5.10.0/darwin-thread-multi-2level /System/Library/Perl/Extras/5.10.0 .) at main.pm line 5. I downloaded and installed both modules manually to work with MAMP using the following commands as specified in this forum post: For DBI 1. cd /Library/Perl/DBI-1.611 2. sudo Perl Makefile.PL 3. sudo make 4. sudo make install For DBD 1. cd /Library/Perl/DBD-mysql-4.014 2. sudo Perl Makefile.PL --mysql_config=/Applications/MAMP/Library/bin/mysql_config 3. sudo make 4. sudo make install What I noticed while running the above commands is that the files seems to be getting installed in the '/opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/' directory which doesn't seem to be one of the search directories that Apache mentions in the error at the beginning of this post. Here is what I'm seeing during the install: $ sudo make install Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/DBI.bundle Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/dbipport.h Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/DBIXS.h Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/dbixs_rev.h Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/Driver.xst Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/Driver_xst.h Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/TASKS.pod Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBD/DBM.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBD/File.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBD/Gofer.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/Changes.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/DBD.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/Profile.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/ProxyServer.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/PurePerl.pm Installing /opt/local/share/man/man3/DBD::DBM.3pm Installing /opt/local/share/man/man3/DBD::File.3pm Installing /opt/local/share/man/man3/DBD::Gofer.3pm Installing /opt/local/share/man/man3/DBI.3pm Installing /opt/local/share/man/man3/DBI::DBD.3pm Installing /opt/local/share/man/man3/DBI::Profile.3pm Installing /opt/local/share/man/man3/DBI::ProxyServer.3pm Installing /opt/local/share/man/man3/DBI::PurePerl.3pm Installing /opt/local/share/man/man3/TASKS.3pm Installing /opt/local/bin/dbiprof Installing /opt/local/bin/dbiproxy Writing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/.packlist Appending installation info to /opt/local/lib/perl5/5.8.9/darwin-2level/perllocal.pod My question is, what am I doing wrong and how can I either 1) Get Apache to look in the right directory where the DBD & DBI modules are installed or 2) Update the way I'm installing the module to install them into one of the search directories. I honestly don't know what option makes more sense and could use guidance on that as well. As you can probably tell I'm pretty lost at the moment. Please help!!!

    Read the article

  • How can I install Perl's DBI on Mac OS X so Apache can find it?

    - by Russell C.
    I'm trying to setup a Perl development environment on my Mac laptop and have been having a really hard time getting it working. I thought I had everything configured correctly but when I try to run a sample script it is reporting errors with the DBI module and can't access the DB. Here is what is reported in the Apache error logs: [Fri Apr 30 23:11:33 2010] [error] [client 127.0.0.1] Can't locate DBI.pm in @INC (@INC contains: /Library/Perl/Updates/5.10.0/darwin-thread-multi-2level /Library/Perl/Updates/5.10.0 /System/Library/Perl/5.10.0/darwin-thread-multi-2level /System/Library/Perl/5.10.0 /Library/Perl/5.10.0/darwin-thread-multi-2level /Library/Perl/5.10.0 /Network/Library/Perl/5.10.0/darwin-thread-multi-2level /Network/Library/Perl/5.10.0 /Network/Library/Perl /System/Library/Perl/Extras/5.10.0/darwin-thread-multi-2level /System/Library/Perl/Extras/5.10.0 .) at main.pm line 5. I downloaded and installed both modules manually to work with MAMP using the following commands as specified in this forum post: For DBI 1. cd /Library/Perl/DBI-1.611 2. sudo Perl Makefile.PL 3. sudo make 4. sudo make install For DBD 1. cd /Library/Perl/DBD-mysql-4.014 2. sudo Perl Makefile.PL --mysql_config=/Applications/MAMP/Library/bin/mysql_config 3. sudo make 4. sudo make install What I noticed while running the above commands is that the files seems to be getting installed in the '/opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/' directory which doesn't seem to be one of the search directories that Apache mentions in the error at the beginning of this post. Here is what I'm seeing during the install: $ sudo make install Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/DBI.bundle Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/dbipport.h Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/DBIXS.h Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/dbixs_rev.h Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/Driver.xst Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/Driver_xst.h Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/TASKS.pod Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBD/DBM.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBD/File.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBD/Gofer.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/Changes.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/DBD.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/Profile.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/ProxyServer.pm Installing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/DBI/PurePerl.pm Installing /opt/local/share/man/man3/DBD::DBM.3pm Installing /opt/local/share/man/man3/DBD::File.3pm Installing /opt/local/share/man/man3/DBD::Gofer.3pm Installing /opt/local/share/man/man3/DBI.3pm Installing /opt/local/share/man/man3/DBI::DBD.3pm Installing /opt/local/share/man/man3/DBI::Profile.3pm Installing /opt/local/share/man/man3/DBI::ProxyServer.3pm Installing /opt/local/share/man/man3/DBI::PurePerl.3pm Installing /opt/local/share/man/man3/TASKS.3pm Installing /opt/local/bin/dbiprof Installing /opt/local/bin/dbiproxy Writing /opt/local/lib/perl5/site_perl/5.8.9/darwin-2level/auto/DBI/.packlist Appending installation info to /opt/local/lib/perl5/5.8.9/darwin-2level/perllocal.pod My question is, what am I doing wrong and how can I either 1) Get Apache to look in the right directory where the DBD & DBI modules are installed or 2) Update the way I'm installing the module to install them into one of the search directories. I honestly don't know what option makes more sense and could use guidance on that as well. As you can probably tell I'm pretty lost at the moment. Please help!!! Thanks in advance.

    Read the article

  • IE 11 Developer Tools - changing console target to a different frameset or iframe

    - by vladimirl
    Originally posted on: http://geekswithblogs.net/vladimirl/archive/2013/10/25/ie-11-developer-tools---changing-console-target-to-a.aspxTo change current console iframe/frameset type this into console command line where "contentIFrame" in the iframe/frameset name (there should not be quotes around the iframe name):console.cd(contentIFrame);To return to the top level window, use cd() with no argument:console.cd();It took me some time to find out that this was possible in IE 11 Developer tools. Everything is so much easier in Chrome. No drama. Sometimes I feel that I hate IE more and more. Reference (http://msdn.microsoft.com/en-us/library/ie/dn255006(v=vs.85).aspx#console_in):All script entered in the command line executes in the global scope of the currently selected window. If your webpage is built with a frameset or iframes, those frames load their own documents in their own windows.To target the window of a frameset frame or an iframe, use the cd() command, with the frame/iframe's name or ID attribute as the argument. For example, you have a frame with the name microsoftFrame and you're loading the Microsoft homepage in it.JavaScriptcd(microsoftFrame); Current window: www.microsoft.com/en-us/default.aspx Important  Note that there were no quotes around the name of the frame. Only pass the unquoted name or ID value as the parameter.To return to the top level window, use cd() with no argument.

    Read the article

  • Using virt-install to mount multiple cdrom drives/images

    - by Dana the Sane
    I would like to create a windows xp guest from the windows xp upgrade cd I have, along with one of a few full versions I have around. However, when I reach the stage in the installer where I am prompted to insert a full version cd, the installer can't find it, i.e.: Setup could not read the CD you inserted, or the CD is not a valid Windows CD.. Is there a work-around for this?, my Googling didn't uncover anything. I've tried various combinations of mounting .iso files and specifying disks, such as: $sudo virt-install --accelerate --connect qemu:///system -n xpsp1 -r 2048 --disk ./vm/winxp_sp1.iso,device=cdrom --disk ./vm/windows.qcow2,size=12 --vnc --noautoconsole --os-type windows --os-variant winxp --vcpus 2 -c /dev/cdrom --check-cpu If I try to specify multiple cdrom drives, I receive an error: virt-install --accelerate --connect qemu:///system -n xpsp1 -r 2048 --disk ./vm/winxp_sp1.iso,device=cdrom --disk /dev/cdrom,device=cdrom --disk ./vm/windows.qcow2,size=12 --vnc --noautoconsole --os-type windows --os-variant winxp --vcpus 2 --check-cpu Starting install... ERROR IDE CDROM must use 'hdc', but target in use.

    Read the article

  • Errors while updating Ubuntu 13.10

    - by santiago
    When I execute the updater it always throws the same error saying: Failed to download repository information. Check your internet connection. And when I run the sudo apt-get update I get these lines at the end: W: Failed to fetch cdrom://Ubuntu 13.10 Saucy Salamander - Release i386 (20131016.1)/dists/saucy/main/binary-i386/Packages Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs W: Failed to fetch cdrom://Ubuntu 13.10 Saucy Salamander - Release i386 (20131016.1)/dists/saucy/restricted/binary-i386/Packages Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs W: Failed to fetch http://ppa.launchpad.net/tiheum/equinox/ubuntu/dists/saucy/main/source/Sources 404 Not Found W: Failed to fetch http://ppa.launchpad.net/tiheum/equinox/ubuntu/dists/saucy/main/binary-i386/Packages 404 Not Found E: Some index files failed to download. They have been ignored, or old ones used instead

    Read the article

  • Macbook won't read disk

    - by Gracie
    I have a macbook that I erased the original iOS on to restart with Ubuntu but when I put in my home burned disk it doesn't read it correctly and makes loud clicking noises. I burned it on a TDK CD-R80 700 MB CD from Windows 7 and even did the confirm to make sure it burned correctly. It has never read CDs like that before, so it's weird. Should I just make another CD? Or is there something wrong with the Macbook.

    Read the article

  • Macbook Pro Hard Drive won't shop up on disk startup

    - by Kristal
    I have a macbook pro from 2007. It came with an installation CD for 10.4.8. The first problem is that it won't even recognize the installation CD even though the CD seems perfectly fine. So I used another installation CD just to get me to the Disc Utility dialogue box. I went through the steps to erase the hard drive. However when I attempted to reboot the machine using Disc Startup there was no option for me to select the hard drive. Of course, since I don't have the appropriate installation disk in it won't let me install anything. What are my options? Do I need to ask Apple to send me a new installation CD for this computer? And why wouldn't the hard drive show up in the Startup options?

    Read the article

  • PHP remote development workflow: git, symfony and hudson

    - by user2022
    I'm looking to develop a website and all the work will be done remotely (no local dev server). The reason for this is that my shared hosting company a2hosting has a specific configuration (symfony,mysql,git) that I don't want to spend time duplicating when I can just ssh and develop remotely or through netbeans remote editing features. My question is how can I use git to separate my site into three areas: live, staging and dev. Here's my initial thought: public_html (live site and git repo) testing: a mirror of the site used for visual tests (full git repo) dev/ticket# : git branches of public_html used for features and bug fixes (full git repo) Version Control with git: Initial setup: cd public_html git init git add * git commit -m ‘initial commit of the site’ cd .. git clone public_html testing mkdir dev Development: cd /dev git clone ../testing ticket# all work is done in ./dev/ticket#, then visit www.domain.com/dev/ticket# to visually test make granular commits as necessary until dev is done git push origin master:ticket# if the above fails: merge latest testing state into current dev work: git merge origin/master then try the push again mark ticket# as ready for integration integration and deployment process: cd ../../testing git merge ticket# -m "integration test for ticket# --no-ff (check for conflicts ) run hudson tests visit www.domain.com/testing for visual test if all tests pass: if this ticket marks the end of a big dev sprint: make a snapshot with git tag git push --tags origin else git push origin cd ../public_html git checkout -f (live site should have the latest dev from ticket#) else: revert the merge: git checkout master~1; git commit -m "reverting ticket#" update ticket# that testing failed with the failure details Snapshots: Each major deployment sprint should have a standard name and should be tracked. Method: git tag Naming convention: TBD Reverting site to previous state If something goes wrong, then revert to previous snapshot and debug the issue in dev with a new ticket#. Once the bug is fixed, follow the deployment process again. My questions: Does this workflow make sense, if not, any recommendations Is my approach for reverting correct or is there a better way to say 'revert to before x commit'

    Read the article

  • Ubuntu 12.04 Install - Black Screen - No Grub - Have run Boot Repair Disk

    - by Pat
    Day 4 of my purgatory. History: Had problems with live CD at first, had to set the "nomodeset" option ... and then it worked fine. Installed Ubuntu "Alongside" Windows XP from live CD (NOT wubi) Upon reboot after installation, I get the BIOS ... and then a black screen. If I hit shift after the BIOS screen I get text that says "loading GRUB ..", but then no GRUB ... just a black screen. What I have tried to do: Total re-installation ... 3 times now. Also tried with wubi, same black screen. Have gone back to the normal (non-wubi) install. After installation, I tried re-booting the live cd ... and trying to change GRUB file using: sudo gedit /etc/default/grub ... to "nomodeset" and "timeout=10" ... but won't let me save my changes because I'm using the live cd "in memory" system and don't have permissions to the disks (I think). I tried logging in ... but it won't let me. I then read many posts on this site. I'm stuck. This morning, I ran the "boot repair disk". Results here: http://paste.ubuntu.com/1132333/ What I think is wrong: Since I can get the live CD to run (perfectly) with the "nomodeset" option, I think all I need to do is get to GRUB to change that ... but I can't get to GRUB. Appreciate any advice. Pat Day 5 ... I downloaded "Super Grub 2 Disk" from: http://www.supergrubdisk.org/super-grub2-disk/ This looks promising. I can boot the disk and it brings me to a GRUB program that allows me to: 1) Boot to Windows ... which works 2) Boot to Ubuntu ... which does NOT work When I choose boot to Ubuntu, I get lines across the screen which is an obvious video card problem. Likely because I need to set the "nomodeset" option. So, I attempted to use super grub2 to edit the grub file ... but it is TOTALLY different than the Ubuntu grub file ... and I don't know where to put the "nomodeset" option. Still stuck ... The bottom line is that: 1) I need to edit /etc/default/grub on sda(1) ... which is my boot drive ... to add the "nomodeset" option 2) To do that I need to get into grub ... but, I can't. Holding down shift just echo's "loading grub .." and then takes me to a black screen 3) I can boot to the live CD by setting nomodeset .... but I cannot access the hard disk as root ... I can't save my changes! Can anyone tell me how to login as root for the filesystem from the live CD ... so I can edit the grub file on the HARD DISK ... and then run update-grub??

    Read the article

  • Cannot dual Windows XP and Ubuntu

    - by Fabio Machado
    I am new to Ubuntu and at the moment I am trying to get Ubuntu 12.10 to one of my machines. The machine is a Pentium 4 @ 3.06, 2Gb RAM, 200GB Hard Drive and a NVidia GeForce 8800 GT. A few days ago, I tried Ubuntu without installing and it worked perfectly. Yesterday, I decided to formatted the hard drive and divide my hard drive into four partitions: 1 for the XP, 1 for Ubuntu, 1 for swamp and 1 where I will have my documents. Everything went great, I installed XP and then Ubuntu but I did something wrong on the partition window (Ubunto partion window) that I ended up without boot loader. This morning, I formatted everything again, installed XP and when I went to install Ubuntu (with the same DVD as before) the problems started. First, I had a black screen with a msg written with white text saying something like: unable to find a medium containing a live file system. After I burned another CD and tried again, I got stuck at the red dots (loading screen). I then went online and I read somewhere that it could be the CD, so I checked the integrity of the CD and everything was fine. I also unplugged all USBs connected to the computer and nothing changed. I goggled further options to try to solve my problem and some users suggested that people having these types of problems should try the alternate installation, which if I am not wrong is for networks. I then tried to install and yes the installation process was different from the normal CD, but it did get stuck on a page where it was doing something, like: ...finding ethd0 and it was stuck on the 100%. I tried USB installation as well and it also got stuck at the red dots (I do not have USB 3.0 on the computer in question). I have burned 5 different CD's and all at low speed. I checked the integrity and all are fine. I downloaded other distribution as well as other versions of Ubuntu and I still cannot install or even run the Live CD of Ubuntu or any other distribution. What is really annoying me is that everything was working perfectly before, when I first tried to install Ubuntu. Anyway, any help is welcome. Edit: My boot load is normal, no errors and all the hardware is working fine. I forgot to mention that after the loading screen (red dots) gets stuck, the DVD drive and the hard drive goes into idle state. I also restored the default values of the BIOS and no luck.

    Read the article

  • Usb Live No hardisk

    - by sergey simeonov
    Ok so i own a toshiba laptop , and the thing is my hdd went bad,but i had a usb flash drive with i live cd Ubuntu on it. Now i dont have and hdd plugged in my laptop im only with a flashdrive. My question is how much memory does this live cd support cause my flash drive is 32 gigs and after about 1.5 gigs of downloads a screen shows up and tells me that i dont have enough space left. the other thing is i dont have money to get a hdd right now so i wanna use this flash drive for now but can i somehow customize the cd thru the live edition so i could have programs that i need after restarts i tried with Customization Live Cd but when i run it , it stops and in my terminal it says could not execute not enough space. So if anyone can tell me what can i do with this problem im having with space on my live Usb ubuntu.

    Read the article

  • Double root folder vs single root folder

    - by Tomas
    On my Linux box, in bash, I have access to a "double root" folder denoted by two forward slashes: tomas:~ $ cd / tomas:/ $ ls bin/ cdrom@ ... tomas:/ $ cd // tomas:// $ ls bin/ cdrom@ ... The content of the folder and its subfolder is identical to the "normal" single slash root. The double slash does not go away when I access its subfolders. The annomaly does not repeat itself with three or more slashes; these are simple synonyms for the root: tomas:// $ cd home/tomas tomas://home/tomas $ cd /// tomas:/ $ cd //// tomas:/ $ What kindof place is it? Is it a bug? Can anyone explain the annomaly?

    Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >