Search Results

Search found 1672 results on 67 pages for 'grub'.

Page 32/67 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

  • GRUB2 prompt instead of BURG boot screen after mistake during BURG installation

    - by Tomas Lycken
    I just installed BURG, but during the installation I made a mistake: after the package was installed, I got to some command-line based GUI for configuration, where I forgot to mark my (only) hard disk as the boot device before I hit OK. I tried to reinstall (apt-get purge burg && apt-get autoremove followed by apt-get install burg) but I wasn't able to get to the same screen again (I didn't find the GUI). When I now start my computer, I am taken to a GRUB2 prompt and no BURG (or GRUB2) boot menu is shown. Since I don't know any GRUB commands and I am helpless. How do I reinstall GRUB/BURG correctly? Update: I rebooted my computer, and got a BURG prompt (which appears to be the same thing as a GRUB prompt, but if there's a difference I wouldn't know it...). I have booted from a Live USB, but I don't know what to do next. The text above has been updated to reflect this new situation - for the original text, please see the previous versions of this post. (No answers were posted when this was edited...)

    Read the article

  • Create Windows Bootloader/Boot into Windows from Ubuntu

    - by Kincaid
    I have computer that dual-boots (or tri-boots) Windows 8 Release Preview, Windows 7, and Ubuntu 12.04. Grub boots between Windows 8 and Ubuntu; for which I use primarily. Recently, I have decided I wanted to remove Ubuntu, as I hardly used it. As a stupid mistake, I deleted the Ubuntu partition before changing the bootloader to replace Grub. Whenever I know boot the machine, it gives me the "grub-rescue" prompt -- I am unable to boot into either Windows (8 nor 7), nor Ubuntu (except via USB, of course). I do not have any Windows 7/8 recovery media, so that isn't an option. Please note that after I deleted the Ubuntu partition, I put the PC into hibernate, and then turned it on. This means the C:\ [Windows 8] drive cannot be mounted. I don't know if that is bad, but it definitely doesn't make things better. I am currently booting Ubuntu via USB, in an effort to restore the Windows bootloader solutions. I have looked into using boot-repair to solve the problem using the instructions here, although after attempting to apply the changes, it gave the error: "Please install the [mbr] packages. Then try again." I don't know why I'm getting this error; is there a way to install the 'mbr packages?' I honestly don't know what exactly they are, nor how to install them. Is there any options I have not yet exhausted to be able to boot back into Windows, in the case that there is a better way? In the end, I want to set the bootloader to boot into Windows 8, but booting into either Windows 7 or 8 is fine -- I can use EasyBCD from there. Is there a simple solution to this? I've checked BIOS, and I haven't been able to find a way to boot into Windows. Any help would be greatly appreciated.

    Read the article

  • Boot-repair commands not found in PATH or not executable

    - by Bram Meerten
    I recently had problems with my ubuntu partition (after the battery died), I managed to fix them by running ubuntu from usb and run gparted. It worked I can access my files on the partition by running ubuntu from usb. But when I restart the computer, after selecting ubuntu in Grub, I get a black screen with a white underscore. I googled the problem, and tried to solve it by setting nomodeset, but it didn't work. Next I wanted to try to fix Grub using boot-repair, I clicked on 'Recommended repair', it tells me to type the following commands in the terminal: sudo chroot "/mnt/boot-sav/sda5" apt-get install -fy sudo chroot "/mnt/boot-sav/sda5" dpkg --configure -a sudo chroot "/mnt/boot-sav/sda5" apt-get purge -y --force-yes grub-common But when running the second command, I get this error: dpkg: warning: 'sh' not found in PATH or not executable. dpkg: warning: 'rm' not found in PATH or not executable. dpkg: warning: 'tar' not found in PATH or not executable. dpkg: error: 3 expected programs not found in PATH or not executable. Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. I didn't edit /etc/environment (or any other files), this is what it looks like: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" RUNNING_UNDER_GDM="yes" I have no idea how to fix this. I'm running dualboot Ubuntu 12.04 and Windows 7, Windows boots fine.

    Read the article

  • Booting sequence. Ubuntu 12.04 installation and cohabitation with former OSes

    - by Stephane Rolland
    I am on the brink of installing Ubuntu 12.04 Precise Pengolin on the first primary partition of my hard-drive. (A day in History for me since I had always kept a MS windows at this first place). But I have some fears: This is my last computer available (In the past I used to have 2 or even 3 machines so I could always un/plug HDs for recovery operations and rescue) The current booting sequence is not straight forard. So as to explain the boot sequence let me briefly sum-up the history of this laptop computer. It was a dedicated Windows Vista computer. 1st and only Primary partition. Then I added Windows 7 (on the 2nd primary partition) letting the Windows Vista Boot Loader manage the boot sequence. Then I added Ubuntu 10.04 Lucid Lynx on the 1st sub-partition of the Extended Partitionm asking Grub to be the boot loader. But when I ask Grub to launch windows it launches the Vista BootLoader that manages the choice betzeen Vista and 7. So in theory Grub is on the MasterBootRecord - though I understand where the Vista BootLoader remains. Now, I will no longer use the Ubuntu 10.04 ( on extended partition) and also the Windows vista (on the first primary partition). I will install Ubuntu 12.04 on the First Primary, asking it to install a new bootloader. I want to keep the Windows 7 that is already on the Second Primary partition. And I want it to be loaded by the Ubuntu Boot loader(I don4t knoz zhich is included in this version)... And I am afraid the last point will not work.

    Read the article

  • Ubuntu 12.04.2 Dual boot UEFI Windows 8 Preinstalled CX21903W Ultrabook

    - by user180782
    Hi i have a problem trying to install ubuntu. The machine is a CX Ultrabook model CX.21903W Intel I5 with 500GB hard disk, 8 GB ram and 32 GB SSD. From Installing Ubuntu on a Pre-Installed Windows 8 (64-bit) System (UEFI Supported), and according to the steps guide: 1 - We create a partition from Win8 (70 GB) from the own win8 program. 2 - Confirm-SecureBootUEFI=True. 3 - From Win8, shift + Restart and from special menu we selected the UEFI Firmware Setting. 4 - From BIOS Option: ------Option 1) Disable Secure Boot. ------Option 2) Disable UEFI (Not Available) from Option 1: Three ways is available. With Secure Boot enable - We can't even boot ubuntu. A red windows saying Soft unproper signed. With Secure Boot disable - and this config in boot device order: ----1: UEFI: USB ----2: Windows Boot Manger ----3: Others and CSM (Compatibility Support Module): enable - GRUB appears and selecting try Ubuntu then a black windows appears and nothing happens. The same result if install ubuntu is selected. With Secure Boot disable - and this config in boot device order: ----1: USB (No UEFI) ----2: Windows Boot Manger ----3: Others and CSM (Compatibility Support Module): enable - GRUB appears and selecting try Ubuntu, - Ubuntu boots and we can install it even. 5 - Rebooting and just changing the boot order as ----1: Ubuntu [] ----2: Windows Boot Manger ----3: Others then nothings happens. 6 - Booting from LiveUSB again and, as per instructed, making Boot-Repair (A warning windows: Ubuntu is working in legacy mode.). 7 - Saving changes and rebooting, Grub works but selecting Ubuntu, a black windows appears and nothing happens. Selecting Win8, Win8 boots and works. Untill now we can't make the ubuntu installation. Any suggestion will be welcomed. kind regards and thanks in advance.

    Read the article

  • Reboot failure after upgrade from 8.04 LTS to 10.04 LTS

    - by Alan Fietz
    I bought our computer from Freegeeks with Ubuntu 8.04 installed. I upgraded from Ubuntu 8.04 to 10.04 on Thursday November 10. I have an ASUS P4P800SE with dual Intel P4@3GHZ. Installation messages were: - Error loading Nautilus config info - Replaced customied /etc/login.defs - Replaced customized /etc/dhcp3/dhclient.conf - 189 packages removed - WARNING: Failed to read mirror file When I rebooted, the usual ASUS screen appeared, then "Loading GRUB" then "starting Up..." then "starting Up..." again then a blank screen (the moniter went dormant). I rebooted, started GRUB and selected: version 10.04.3 LTS kernel 2.6.32-35 generic I got the same results. I rebooted, started GRUB and selected: kernel 2.6.24-29 generic Here's what was displayed: udevd [875]: error getting socket: Invalid argument libudev:udev_monitor_new_from_netlink: error getting socket: Invalid argument Segmentation fault **Gave up waiting for root device** Common problems - Boot args (cat/proc/cmdline) - Check root delay - check root - Missing modules (cat/pro/modules; **Alert! /dev/disk/by_vvid/c59c6361 etc... does not exist. Dropping to a shell.** Then Busybox v1.13.3 started with the following prompt (?) (initramfs) _ But my typing did not appear on the screen. It appears the hard drive cannot be found. Any suggestion on how to remedy this? Thank you.

    Read the article

  • Can't update kernel to 2.6.35.27

    - by Uri Herrera
    When I try to update I get this message, I'm guessing I'm missing something here? Filesystem Type Size Used Avail Use% Mounted on /dev/sdb6 ext4 43G 7.7G 33G 20% / none devtmpfs 1.6G 349k 1.6G 1% /dev none tmpfs 1.6G 5.9M 1.6G 1% /dev/shm none tmpfs 1.6G 218k 1.6G 1% /var/run none tmpfs 1.6G 0 1.6G 0% /var/lock /dev/sdb2 fuseblk 258G 198G 60G 77% /media/Backup /dev/sda1 fuseblk 321G 175G 146G 55% /media/Media /dev/sdb1 ext4 96M 84M 6.7M 93% /boot /dev/sdb7 ext4 175G 81G 86G 49% /home Here's the output: Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: linux-image-2.6.35-22-generic 0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded. 5 not fully installed or removed. After this operation, 107MB disk space will be freed. Do you want to continue [Y/n]? y (Reading database ... 282211 files and directories currently installed.) Removing linux-image-2.6.35-22-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 2.6.35-22-generic /boot/vmlinuz-2.6.35-22-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 2.6.35-22-generic /boot/vmlinuz-2.6.35-22-generic /etc/default/grub: 23: Syntax error: newline unexpected run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 2 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-2.6.35-22- generic.postrm line 328. dpkg: error processing linux-image-2.6.35-22-generic (--remove): subprocess installed post-removal script returned error exit status 1 Errors were encountered while processing: linux-image-2.6.35-22-generic E: Sub-process /usr/bin/dpkg returned an error code (1)

    Read the article

  • Cannot boot computer, help please :(

    - by Austin
    Ok so here is more descriptions, I REALLY NEED HELP! I installed Ubuntu on a disk (unsure of v. I can't check.. Computer is broke :/ ) I then burned the disk I restarted computer pressed f12 blah blah it came up, I pressed enter for English, I plugged an Ethernet card in for better connection, and then started the installation.... I did the basics, and I entered a host name, and a user name and pass all that, when it came to partition page, I presse enter for no and then it went back to the installation page, I pressed install again, and it brought me back, so I selected yes , it loaded an it asked what software to instal I selected sh ( it was first option and I didn't know which to do ) so after everything finished loading, my disk was ejected the process finish, I run my computer and it opens up in log in page on cmd script I didn't know it, so I ran disk again makin a user and pass to remember.... Going back to login thing I logged in, and all it did was say my username... I didn't know what to do from there, I looked online found nothing but grub stuff, so I went to "Advanced Ubuntu options" and then "(Recovery Mode) and went to update grub... In middle o loading it asked to continue (Y/n) I typed Y and it finished, it went back to the options located in (Recovery Mode) and I closed it, and it loaded... And then showed up in another script screen, saying a paragraph on top, and on left side ( where login: would be located etc. ) it says "Grub" and I don't know what to type, if I turn off computer and turn back on it just goes straight to that again... PLEASE HELP:(

    Read the article

  • How to create or recover Windows Bootloader after deleting Ubuntu boot drive

    - by Kincaid
    I have a computer that dual-boots (or tri-boots) Windows 8 Release Preview, Windows 7, and Ubuntu 12.04. Grub boots between Windows 8 and Ubuntu; for which I use primarily. Recently, I decided to remove Ubuntu, as I hardly used it. I deleted the Ubuntu partition accidentally before replacing the Grub bootloader. Now, whenever I want to boot the machine, it gives me the "grub-rescue" prompt -- I am unable to boot into either Windows (8 nor 7), nor Ubuntu (except via USB, of course). I do not have any Windows 7/8 recovery media, so that isn't an option. Please note that after I deleted the Ubuntu partition, I put the PC into hibernate, and then turned it on. This means the C:\ [Windows 8] drive cannot be mounted. I don't know if that is bad, but it definitely doesn't make things better. I am currently booting Ubuntu via USB, in an effort to restore the Windows bootloader. I have looked into using boot-repair to solve the problem using the instructions here, although after attempting to apply the changes, it gave the error: "Please install the [mbr] packages. Then try again." I don't know why I'm getting this error; is there a way to install the 'mbr packages?' I honestly don't know what exactly they are, nor how to install them. Are there any other options I have not yet exhausted to be able to boot back into Windows, in the case that there is a better way? I want to set the bootloader to boot into Windows 8, but booting into either Windows 7 or 8 is fine (I can use EasyBCD from there). Is there a simple solution to this? I've checked BIOS, and I haven't been able to find a way to boot into Windows.

    Read the article

  • UPDATE MANAGER UNABLE TO UPDATE

    - by muguro
    Requires installation of untrusted packages The action would require the installation of packages from not authenticated sources. i get this error every time i try updating. the system shows that it has 466 updates but fails after clicking update more details have this accountsservice apparmor apport apport-gtk apt apt-transport-https apt-utils aptdaemon aptdaemon-data at-spi2-core bamfdaemon base-files bcmwl-kernel-source bind9-host compiz compiz-core compiz-gnome compiz-plugins-default cron cups cups-bsd cups-client cups-common cups-filters cups-ppdc dbus dbus-x11 dconf-gsettings-backend dconf-service desktop-file-utils dmsetup dnsutils empathy empathy-common eog evince evince-common evolution-data-server evolution-data-server-common firefox firefox-globalmenu firefox-gnome-support firefox-locale-en fontconfig fontconfig-config fonts-liberation fonts-opensymbol foomatic-filters gcalctool gdb ghostscript ghostscript-cups ghostscript-x ginn gir1.2-atspi-2.0 gir1.2-dbusmenu-glib-0.4 gir1.2-dbusmenu-gtk-0.4 gir1.2-gst-plugins-base-0.10 gir1.2-gtk-3.0 gir1.2-gtksource-3.0 gir1.2-gudev-1.0 gir1.2-javascriptcoregtk-3.0 gir1.2-launchpad-integration-3.0 gir1.2-pango-1.0 gir1.2-rb-3.0 gir1.2-totem-1.0 gir1.2-ubuntuoneui-3.0 gir1.2-unity-5.0 gir1.2-webkit-3.0 glib-networking glib-networking-common glib-networking-services gnome-accessibility-themes gnome-control-center gnome-control-center-data gnome-desktop3-data gnome-games-data gnome-icon-theme gnome-media gnome-orca gnome-settings-daemon gnome-sudoku gnomine gnupg google-talkplugin gpgv grub-common grub-pc grub-pc-bin grub2-common gstreamer0.10-alsa gstreamer0.10-plugins-base gstreamer0.10-plugins-base-apps gstreamer0.10-x gvfs gvfs-backends gvfs-bin gvfs-common gvfs-daemons gvfs-fuse gvfs-libs gwibber gwibber-service gwibber-service-facebook gwibber-service-identica gwibber-service-twitter hdparm hplip hplip-data indicator-sound initscripts isc-dhcp-client isc-dhcp-common jockey-common jockey-gtk krb5-locales landscape-client-ui-install language-pack-en language-pack-en-base language-pack-gnome-en language-pack-gnome-en-base launchpad-integration libaccountsservice0 libapt-inst1.4 libapt-pkg4.12 libart-2.0-2 libasound2 libatspi2.0-0 libbamf0 libbamf3-0 libbind9-80 libc-bin libc-dev-bin libc6 libc6-dev libcairo-gobject2 libcairo2

    Read the article

  • 12.04 LTS boot hangs at "SP5100 TCO timer: mmio address 0xfec000f0 already in use", didn't yesterday

    - by DarkIron112
    Dual-booting Windows 7 and Ubuntu 12.04 LTS. I went to reboot from Win to Ubu, and found a few interesting things. My POST screen is covered in blocks of epileptic colors until I hit GRUB, which continues when I try to boot into Ubuntu. These color blocks don't appear when I use my on-board VGA, so I'll just attribute to that. Grub dimensions are swapped (card vs onboard, probably), but, when interfacing with onboard VGA, the Grub Timeout Counter works and when using my card, it does not (see "[!!!]" below for more information) Booting into Ubuntu directly causes the error: SP5100 TCO timer: mmio address 0xfec000f0 already in use Booting into recovery mode, meanwhile, and then "resuming normal boot" gets me to the desktop without native 1440x900 resolution and graphic drivers can't tell the monitor it's looking at (I assume this is because it's not a full graphic boot, and as it says, some drivers won't run?) [!!!] When I reboot after going into recovery mode, the countdown timer works ONCE, puts me back into default ubuntu boot, and then does not work again until after another recovery-mode boot. Windows 7 can boot perfectly with no issues whatsoever from epilepsy color blocks or driver detection. This makes me wonder /why/ the POST screen can't handle my video card anymore. Amidst all the diagnostics, I opened my case and re-seated the videocard securely, ensuring it wasn't a loose connection-- But this did nothing to help me. Hardware I am running an NVidia GeForce GTX 8800 video card in a PCI slot. I have 4.8GiB memory, an AMD Athlon II Quad-core 640 Processor, on an MSI K9N6GM Series Mobo. Onboard video is an NVidia GeForce MCP61(V/S/P) card. Note: I did not have any of these problems yesterday, and I have been using Ubuntu intensively for a week, though it's been working flawlessly for months. I've recently been using it to mod my Android phone, perhaps I messed something up in the file system?

    Read the article

  • Ubuntu 12.04 64 bit "unable to find medium with live filesystem" AFTER normal install

    - by user88710
    So, I got a new computer (64 bit quad core yada yada). pulled my Ubuntu SSD drive from old machine, installed it into new machine. (my intention here is to have Ubuntu installed on the 120G SSD, Win7 on the main drive) downloaded 64 bit Ubuntu, burned it to a disk. rebooted with Live CD, installed Ubuntu to the SSD drive, had no problems rebooted again, got the grub menu, selected Ubuntu after a minute i got this - "unable to find medium with live filesystem" booting into windows, explorer doesnt even see the SSD. Device manager sees it though. I assume this is because its formatted with ext4. so, The liveCD saw the SSD just fine, installed fine, but when i try to boot ubuntu, i get the error above, heeellllpppp! UPDATE: small update. Windows did a software update that apparently wiped out my grub, so I guess grub was installed on the main drive. I reinstalled Ubuntu (again) on the SSD drive but, still no joy with booting from it. same error message as above.

    Read the article

  • How to install Ubuntu 13.10 on Hybrid Disk alongside Windows 8.1

    - by user205691
    I am having trouble installing Ubuntu 13.10 on HP Envy 4-1046tx ultrabook. When i bought this, it came with windows 7 pre-installed, but i upgraded it to 8 and now recently to 8.1. But somehow, i feel 8.1 is slower or something went wrong with the upgrade and made my system slow. I want to try Dual booting Ubuntu 13.10 with windows 8.1 The system recovery drive has windows 7 recovery files. SSD has 4GB allocated to windows 8 (i think for hibernation/rapid start). 25GB of SSD is free and i want to install ubuntu on this SSD pointing it to "/" I will also shrink the windows partition (the only other partition available apart from recovery & SSD) to free up 100GB and allocate this space to "/home" during ubuntu installation. I tried the above steps while on windows 8, but not successful. Ubuntu installation went fine, but the grub was not loaded. I tried to deploy linux via EasyBCD, but after that also, selecting linux in the boot would load grub on command prompt and do nothing. While ubuntu installation, i also deleted the raid drivers with sudo dmraid -rE, but still ubuntu didnt recognize my windows. I think i am missing some steps, so this time i want to do it right with proper info before starting the process. My requirements: dual boot Ubuntu with windows 8.1 c:\ shrinked windows with 300GB on sda1, 100GB for /home on sda1 & ubuntu installed on 25GB SSD volume sda2 (this is mSata i think) GRUB or EFI that helps me load both OS properly without breaking anything SWAP partition can be added if needed on sda1 (4gb?)? I have backed up my drive and have a 16GB usb3.0 with ubuntu loaded. I hope i have mentioned everything i need and know.. All i need now is some guidance and what to do right so that this installation goes as planned :)

    Read the article

  • Failure to Boot Windows 7 after Ubuntu install

    - by Mike
    My computer is a (brand new) PC notebook, without a CD drive running Windows 7. I followed this page to install from USB: https://help.ubuntu.com/community/Installation/FromUSBStickQuick The installation went well and i am using Ubuntu now (v. 12.04 i believe) I want to be able to dual boot Ubuntu and Win7 The problem is that the disc partitioning during the Linux install caused a problem with Windows, caused some problem with windows, and windows can no longer boot when i choose it at the GNU GRUB screen. When i restart my computer i can successfully boot Linux, but not Windows 7. At the GRUB screen - if i run Win7 normally, it freezes, shows a blue screen, and returns back to GRUB - if i run Win7 recovery, i dont know how to access the files that i need in order to run windows again, so nothing helpful happens. Can you please tell me what i would need to do(or link a guide) in order to run Windows again. (Windows and Linux is preferable, but if thats impossible going back to only Windows will help too) Im guessing the easiest thing to do is just to reinstall both OS, or is there anyway to undo the partition i made during the install? Thanks

    Read the article

  • Error while reomving the new kernel 2.6.37

    - by Tarek
    Hi! I tried to install the new kernel but something went wrong and I'm trying to remove it now. The error massege is: mhd@Tarek-Laptop:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: linux-image-2.6.37-020637-generic 0 upgraded, 0 newly installed, 1 to remove and 9 not upgraded. 1 not fully installed or removed. After this operation, 111MB disk space will be freed. Do you want to continue [Y/n]? y (Reading database ... 188780 files and directories currently installed.) Removing linux-image-2.6.37-020637-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 2.6.37-020637-generic /boot/vmlinuz-2.6.37-020637-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 2.6.37-020637-generic /boot/vmlinuz-2.6.37-020637-generic /etc/default/grub: 33: Syntax error: EOF in backquote substitution run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 2 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-2.6.37-020637-generic.postrm line 328. dpkg: error processing linux-image-2.6.37-020637-generic (--remove): subprocess installed post-removal script returned error exit status 1 Errors were encountered while processing: linux-image-2.6.37-020637-generic E: Sub-process /usr/bin/dpkg returned an error code (1) The previous unsloved error is on this bug.

    Read the article

  • receiving "command not found" error messages after fresh reinstall of Lubuntu 14.04

    - by user236378
    Lubuntu 14.04 was working really great. . .until I messed up and had to do a complete fresh reinstall. Now I receive error messages when I input commands into the Terminal, even after immediately completing the fresh install. For example I type: sudo leafpad ?/etc/default/ or sudo leafpad ?/etc/default/grub I get: sudo: leafpad: command not found I type: sudo update-initramfs ?-u or sudo update-grub I get: sudo: update-initramfs: command not found or sudo: update-grub: command not found If I use the command mkdir I get: mkdir: command not found I also get this same exact error message, command not found, with sudo apt-get and wget In other words I can't do anything that I was able to do when inputting commands into the terminal. So I cannot add any repositories or update anything at all. I am not really sure what is causing the problem(s). It appeared to me that Lubuntu installed and booted up OK. However just as soon as I enter anything into the Terminal I immediately get the above error messages. I have tried to do the reinstall three times, same error messages. If anyone can suggest any fixes I would really appreciate it very much. Thank you!

    Read the article

  • Dell M4600 with nVidia Quadro 2000M hangs on boot when external monitor is connected

    - by vladeta
    I have a problem with my fresh installed Ubuntu 12.04 LTS on my Dell M4600: nVidia quadro 2000M i7-2860 16GB ram 128GB SSD Dell/Samsung 750GB HDD IPS RGB laptop display When it is connected via DP++ to the external Dell U2311H monitor, it hangs on boot or when wakening from suspend. If I detach the DP cable it boots normally. I have tried all combinations that I have found, as adding to grub: "no splash", "boot=pci", "acpi=off", etc... I have also changed in nVidia X settings that external monitor is the primary one and also tried to delete monitor.xml file. There is no change it hangs each time after grub. It starts to load daemons then both screens are blank and then completely hangs with beep sound. What I discovered is if I detach the cable and wait for about 2 sec after grub starts booting and then physically connect DP cable while the Ubuntu is still booting everything works normally and I have a picture on my external screen while the laptop screen is off, just as I wanted. Do you maybe know how to solve this issue? Thank You.

    Read the article

  • Incompleted ubuntu 12.04 install dual-boot xp

    - by Mike
    This weekend has been the 1st time i've tried to install ubuntu. On the initial install, (I am using a USB) the installation went all the way through and asked to restart when completed. I was not able to get grub to boot and kept going through windows. After some research I found some articles on updating/reinstalling grub, so I followed those. I finally got grub to load after a day but there was no windows option only the Ubuntu 12.04 which when I selected it only gave me a fatal error 17. I booted from the usb again and deleted the partitions and installed again. This time I got an error 15. I then booted through xp and downloaded the WUBI.exe and uninstalled ubuntu and reinstalled again. The installation went to the very end and then gave an error message (which I don't remember exactly what it said) something along the lines of checking my logs on my C drive. I then uninstalled ubuntu and removed the wubi.exe file and wiped my usb and did the download to the usb again. Booted through usb and ran the install process again. It again went through the install process but after creating username and password and hitting continue the installation dialogue box disappears and the mouse spinning wheel is displayed but I do not receive the prompt to restart. I can still access the side menu for ubuntu but the wheel keeps spinning. How to I get Ubuntu to install properly

    Read the article

  • Booting Ubuntu 12.04 from external eSATA disk

    - by Lord of Scripts
    This is my system topology: Disk #1 (SATA Internal) C: D: (Windows 7 Ultimate) Disk #2 (SATA Internal) E: (Windows Backup) Disk #3 (eSATA External) H: I: (Other windows data) /dev/sdc3 Linux Swap /dev/sdc4 Extended partition /dev/sdc5 Linux / So, I originally had there Ubuntu 8.1 from years ago but never got to use it. Now I used the Ubuntu 12.04 Live CD to install on that same location (That live CD takes a century to boot on a 6GB Intel i7 system...). The installation went fine, I selected it to install on /dev/sdc5 but it never asked me for any boot stuff, where I wanted to install Grub or whatever it is that it uses nowaways (I come from the LILO days when it always worked :-) So, yet again I can't access my new Linux installation. I have to wait a century to boot the "Live" CD and it allows me to see my new installation but I can't do anything with it. I tried the approach of this blog post. Copied the linux.bin of /dev/sdc5 into C: and used the BCDEdit steps to declare the new OS. So when I boot I see the Windows Boot menu and select Linux and after than I only get a black screen with a blinking cursor on the upper left. I can boot into Windows though. So, perhaps it didn't install the boot code on /dev/sdc5? I used this setup years ago booting from Windows with a BIN file: dd if=/dev/sdc5 of=/mnt/share/C/linux.bin bs=512 count=1 I am very reluctant to run GRUB because years ago I did and it wiped out my Windows boot sector and took quite some effort to recover it and be able to boot Windows again. I have been trying to install GRUB on a blank USB stick but I can't find anything clear enough. My system does NOT have a floppy. So can someone give me some ideas about how to get control of my Ubuntu 12.04 installation?

    Read the article

  • ubuntu 12.04 LTS hangs on boot when external monitor is connected

    - by vladeta
    I have a problem with my fresh installed Ubuntu 12.04 LTS on my Dell M4600: nVidia quadro 2000M i7-2860 16GB ram 128GB SSD Dell/Samsung 750GB HDD IPS RGB laptop display When it is connected via DP++ to the external Dell U2311H monitor, it hangs on boot or when wakening from suspend. If I detach the DP cable it boots normally. I have tried all combinations that I have found, as adding to grub: "no splash", "boot=pci", "acpi=off", etc... I have also changed in nVidia X settings that external monitor is the primary one and also tried to delete monitor.xml file. There is no change it hangs each time after grub. It starts to load daemons then both screens are blank and then completely hangs with beep sound. What I discovered is if I detach the cable and wait for about 2 sec after grub starts booting and then physically connect DP cable while the Ubuntu is still booting everything works normally and I have a picture on my external screen while the laptop screen is off, just as I wanted. Do you maybe know how to solve this issue? Thank You.

    Read the article

  • how do I uninstall old kernel options listed in Grub2? [closed]

    - by user12809
    Possible Duplicate: Is there a way to remove/hide old kernel versions? I installed Ubuntu Tweak in Ubuntu 11.10, went to Janitor, and selected and removed old kernels that appeared there (3.0.0-12). Now, the only installed linux-image that appears as 'Installed' in SPM is the most recent one (3.0.0-13), which is the one I want. It did not however eliminate the kernel listing in Grub 2. At boot: However, at boot, in Grub-2, the following options still appear: 3.0.0-13-generic 3.0.0-13-generic (recovery mode) 3.0.0-12 (generic) (on /dev/sde5) 3.0.0-12 (generic (recovery mode) (on /dev/sde5) And, in Terminal, when I change directory (cd) to /boot, and then list (ls), I get the following listed kernels: 3.0.0-13 2.6.38-12 2.6.38-8 (al There is no change when I sudo update-grub in Terminal 1) what is /dev/sde5, and where is it located in the file system, so i can delete it? 2) why the differences between what appears as installed in SPM, what appears at boot in Grub2, and what shows when I list the contents of Grub2 in Terminal? Ultimately, I simply want to remove the 3.0.0-12 kernel options at boot in Grub2. How do I best and simplest do that? Thanks again donofrij is online now Report Post Edit/Delete Message Reply With Quote Multi-Quote This Message Quick reply to this message

    Read the article

  • Setting console resolution in Ubuntu Server 13.10 within VMware

    - by user205625
    I've completed an install of Ubuntu Server 13.10 within VMware and am running into a problem configuring the console (non-graphical) resolution. When I was running Ubuntu Server 13.04, I ran into the same problem... posted the question here, which I later solved by editing /etc/default/grub thus: GRUB_CMDLINE_LINUX_DEFAULT="splash vga=789" I then ran sudo update-grub, sudo reboot and 13.04 stuck in a larger-size console mode... just what I wanted. BUT when I run the same commands in 13.10, during the reboot it changes to the new screen-res, BUT the screen stays black and I can't interact with it. I power down the VM, go back to a previous snapshot, and try again... and again. Since the hwinfo package is no longer available, I can't run sudo hwinfo --framebuffer to see what options are available. Ideas anyone? Here are the uncommented settings in my /etc/default/grub file at this moment: GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=false GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=lsb_release -i -s 2> /dev/null || echo Debian GRUB_CMDLINE_LINUX_DEFAULT="splash" GRUB_CMDLINE_LINUX="find_preseed=/preseed.cfg" GRUB_DISABLE_LINUX_RECOVERY=false GRUB_GFXMODE=800x600

    Read the article

  • No operating system found even when grub2 was reinstalled

    - by Cruzer
    I know there have been many variations on this question and have certainly tried to do my research. I don't really know what I'm doing so I would rather not take risks. I am trying to dual boot xubuntu and windows 7. I started out with xubuntu and just installed windows. Of course, the mbr got overwritten and windows didn't seem to recognize linux. So I booted to the live cd and rewrote the mbr. And of course, now I get the error "No Operating System Found" on startup. I have been following these tutorials to help me out. community.linuxmint.com/tutorial/view/245 unix.stackexchange.com/questions/96977/grub-wont-install ubuntuforums.org/showthread.php?t=2036730 Specifically, I ran these commands: # sdb2 is the partition with xubuntu sudo mount /dev/sdb2 /mnt # sdb1 is my boot partition sudo mount /dev/sdb1 /mnt/boot # not sure what this does, but ran it anyway... for i in /dev /dev/pts /proc /sys /run; do sudo mount -B $i /mnt$i; done sudo chroot /mnt #once chrooted grub-install /dev/sdb update-grub here's a link to my gparted https://www.dropbox.com/s/zpbbzh9z7k1l3pj/gparted.png EDIT--- didn't realize that the drive letters are different in the picture than in my code (its sda in the pic instead of sdb). I have been restarting a lot and sometimes the drive letters change and make my usb into sda.

    Read the article

  • Incomplete Ubuntu 12.04 install dual-boot XP

    - by Mike
    This weekend has been the 1st time I've tried to install Ubuntu. On the initial install, (I am using a USB) the installation went all the way through and asked to restart when completed. I was not able to get grub to boot and kept going through Windows. After some research I found some articles on updating/reinstalling grub, so I followed those. I finally got grub to load after a day but there was no Windows option only the Ubuntu 12.04 which when I selected it only gave me a fatal error 17. I booted from the USB again and deleted the partitions and installed again. This time I got an error 15. I then booted through XP and downloaded the WUBI.exe and uninstalled Ubuntu and reinstalled again. The installation went to the very end and then gave an error message (which I don't remember exactly what it said) something along the lines of checking my logs on my C drive. I then uninstalled Ubuntu and removed the wubi.exe file and wiped my USB and did the download to the USB again. Booted through USB and ran the install process again. It again went through the install process but after creating username and password and hitting continue, the installation dialogue box disappears and the mouse spinning wheel is displayed, but I do not receive the prompt to restart. I can still access the side menu for Ubuntu but the wheel keeps spinning. How do I get Ubuntu to install properly?

    Read the article

  • Can't boot after compiling 3.1 kernel, can only get to terminal

    - by olssy
    Long story short: I tried compiling kernel 3.1 on Ubuntu 11.10 at the same time I had an update waiting for a reboot. Computer would boot to a black screen and would hang there. Ended up installing 11.10 on top of old install with a Live CD. Now I had a purple screen on bootup but it would end up booting. Realized Grub was the problem and tried some stuff but nothing worked. I ended up trying to install propriety ATI video drivers and since that nothing has worked, no grub menu(purple screen) and when it boots into the kernel it ends up hanging, I can sometimes get a terminal up with alt-fx. I have tried removing the ati drivers with the ati script, purging my fglrx driver, reconfiguring my xconf.org and following any tutorial I can find about fixing a broken graphics driver, but to no avail. I've gotten to a point were it seems that the ati propriety drivers are correctly loaded but it still has no grub boot menu and won't boot into Ubuntu. I've chased down my logs and this line is from kern.log: unity-greeter[3269]: segfault at 0 ip b7245cbbsp bf9d3900 error 4 in libgio-2.0.so.0.3000.0[b71ad000+142000] That line leads me to believe I don'T have the correct libgio-2 librairy on my system but have no idea how to find out what package has the correct version... My xorg.conf has no errors and seems to imply the fglrxdrm module got loaded correctly. Would be a bit complicated pasting the whole file here but if it would help I'll post it. LAstly, running fglrxinfo give me: Error: Unable yo open display (null) Any help or link to another tutorial would be appreciated. Thanks.

    Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >