Search Results

Search found 16560 results on 663 pages for 'high tech resources'.

Page 32/663 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

• Heartbeat won't successfully start up resources from a cold boot when a failed node is present

  - by Matthew

  I currently have two ubuntu servers running Heartbeat and DRBD. The servers are directory connected with a 1000Mbps crossover cable on eth1 and have access to an IP camera LAN on eth0. Now, let's say that one node is down and the remaining functional node is booting after having been shut down. The node that is still functioning won't start up heartbeat and provide access to the drbd resource from a cold boot. I have to manually restart heartbeat by sudo service heartbeat restart to get everything up and running. How can I get it to start fine from a cold start, when only one server is present? Here is the ha.cf: debug /var/log/ha-debug logfile /var/log/ha-log logfacility none keepalive 2 deadtime 10 warntime 7 initdead 60 ucast eth1 192.168.2.2 ucast eth0 10.1.10.201 node EMserver1 node EMserver2 respawn hacluster /usr/lib/heartbeat/ipfail ping 10.1.10.22 10.1.10.21 10.1.10.11 auto_failback off Some material from the syslog: harc[4604]: 2012/11/27_13:54:49 info: Running /etc/ha.d//rc.d/status status mach_down[4632]: 2012/11/27_13:54:49 info: /usr/share/heartbeat/mach_down: nice_failback: foreign resources acquired mach_down[4632]: 2012/11/27_13:54:49 info: mach_down takeover complete for node emserver2. Nov 27 13:54:49 EMserver1 heartbeat: [4586]: info: Initial resource acquisition complete (T_RESOURCES(us)) Nov 27 13:54:49 EMserver1 heartbeat: [4586]: info: mach_down takeover complete. IPaddr[4679]: 2012/11/27_13:54:49 INFO: Resource is stopped Nov 27 13:54:49 EMserver1 heartbeat: [4605]: info: Local Resource acquisition completed. harc[4713]: 2012/11/27_13:54:49 info: Running /etc/ha.d//rc.d/ip-request-resp ip-request-resp ip-request-resp[4713]: 2012/11/27_13:54:49 received ip-request-resp IPaddr::10.1.10.254 OK yes ResourceManager[4732]: 2012/11/27_13:54:50 info: Acquiring resource group: emserver1 IPaddr::10.1.10.254 drbddisk::r0 Filesystem::/dev/drbd1::/shr::ext4 nfs-kernel-server IPaddr[4759]: 2012/11/27_13:54:50 INFO: Resource is stopped ResourceManager[4732]: 2012/11/27_13:54:50 info: Running /etc/ha.d/resource.d/IPaddr 10.1.10.254 start IPaddr[4816]: 2012/11/27_13:54:50 INFO: Using calculated nic for 10.1.10.254: eth0 IPaddr[4816]: 2012/11/27_13:54:50 INFO: Using calculated netmask for 10.1.10.254: 255.255.255.0 IPaddr[4816]: 2012/11/27_13:54:50 INFO: eval ifconfig eth0:0 10.1.10.254 netmask 255.255.255.0 broadcast 10.1.10.255 IPaddr[4804]: 2012/11/27_13:54:50 INFO: Success ResourceManager[4732]: 2012/11/27_13:54:50 info: Running /etc/ha.d/resource.d/drbddisk r0 start Filesystem[4965]: 2012/11/27_13:54:50 INFO: Resource is stopped ResourceManager[4732]: 2012/11/27_13:54:50 info: Running /etc/ha.d/resource.d/Filesystem /dev/drbd1 /shr ext4 start Filesystem[5039]: 2012/11/27_13:54:50 INFO: Running start for /dev/drbd1 on /shr Filesystem[5033]: 2012/11/27_13:54:51 INFO: Success ResourceManager[4732]: 2012/11/27_13:54:51 info: Running /etc/init.d/nfs-kernel-server start Nov 27 13:55:00 EMserver1 heartbeat: [4586]: info: Local Resource acquisition completed. (none) Nov 27 13:55:00 EMserver1 heartbeat: [4586]: info: local resource transition completed. Nov 27 13:57:46 EMserver1 heartbeat: [4586]: info: Heartbeat shutdown in progress. (4586) Nov 27 13:57:46 EMserver1 heartbeat: [5286]: info: Giving up all HA resources. ResourceManager[5301]: 2012/11/27_13:57:46 info: Releasing resource group: emserver1 IPaddr::10.1.10.254 drbddisk::r0 Filesystem::/dev/drbd1::/shr::ext4 nfs-kernel-server ResourceManager[5301]: 2012/11/27_13:57:46 info: Running /etc/init.d/nfs-kernel-server stop ResourceManager[5301]: 2012/11/27_13:57:46 info: Running /etc/ha.d/resource.d/Filesystem /dev/drbd1 /shr ext4 stop Filesystem[5372]: 2012/11/27_13:57:46 INFO: Running stop for /dev/drbd1 on /shr Filesystem[5372]: 2012/11/27_13:57:47 INFO: Trying to unmount /shr Filesystem[5372]: 2012/11/27_13:57:47 INFO: unmounted /shr successfully Filesystem[5366]: 2012/11/27_13:57:47 INFO: Success ResourceManager[5301]: 2012/11/27_13:57:47 info: Running /etc/ha.d/resource.d/drbddisk r0 stop ResourceManager[5301]: 2012/11/27_13:57:47 info: Running /etc/ha.d/resource.d/IPaddr 10.1.10.254 stop IPaddr[5509]: 2012/11/27_13:57:47 INFO: ifconfig eth0:0 down IPaddr[5497]: 2012/11/27_13:57:47 INFO: Success Nov 27 13:57:47 EMserver1 heartbeat: [5286]: info: All HA resources relinquished. Nov 27 13:57:48 EMserver1 heartbeat: [4586]: info: killing /usr/lib/heartbeat/ipfail process group 4603 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBFIFO process 4589 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBWRITE process 4590 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBREAD process 4591 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBWRITE process 4592 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBREAD process 4593 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBWRITE process 4594 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBREAD process 4595 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBWRITE process 4596 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBREAD process 4597 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBWRITE process 4598 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBREAD process 4599 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4589 exited. 11 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4596 exited. 10 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4598 exited. 9 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4590 exited. 8 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4595 exited. 7 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4591 exited. 6 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4592 exited. 5 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4593 exited. 4 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4597 exited. 3 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4594 exited. 2 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4599 exited. 1 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: emserver1 Heartbeat shutdown complete. Here is some more from the log ResourceManager[2576]: 2012/11/28_16:32:42 info: Acquiring resource group: emserver1 IPaddr::10.1.10.254 drbddisk::r0 Filesystem::/dev/drbd1::/shr::ext4 nfs-kernel-server IPaddr[2602]: 2012/11/28_16:32:42 INFO: Running OK Filesystem[2653]: 2012/11/28_16:32:43 INFO: Running OK Nov 28 16:32:52 EMserver1 heartbeat: [1695]: WARN: node emserver2: is dead Nov 28 16:32:52 EMserver1 heartbeat: [1695]: info: Dead node emserver2 gave up resources. Nov 28 16:32:52 EMserver1 ipfail: [1807]: info: Status update: Node emserver2 now has status dead Nov 28 16:32:52 EMserver1 heartbeat: [1695]: info: Link emserver2:eth1 dead. Nov 28 16:32:53 EMserver1 ipfail: [1807]: info: NS: We are still alive! Nov 28 16:32:53 EMserver1 ipfail: [1807]: info: Link Status update: Link emserver2/eth1 now has status dead Nov 28 16:32:55 EMserver1 ipfail: [1807]: info: Asking other side for ping node count. Nov 28 16:32:55 EMserver1 ipfail: [1807]: info: Checking remote count of ping nodes. Nov 28 16:32:57 EMserver1 heartbeat: [1695]: info: Heartbeat shutdown in progress. (1695) Nov 28 16:32:57 EMserver1 heartbeat: [2734]: info: Giving up all HA resources. ResourceManager[2751]: 2012/11/28_16:32:57 info: Releasing resource group: emserver1 IPaddr::10.1.10.254 drbddisk::r0 Filesystem::/dev/drbd1::/shr::ext4 nfs-kernel-server ResourceManager[2751]: 2012/11/28_16:32:57 info: Running /etc/init.d/nfs-kernel-server stop ResourceManager[2751]: 2012/11/28_16:32:57 info: Running /etc/ha.d/resource.d/Filesystem /dev/drbd1 /shr ext4 stop Filesystem[2829]: 2012/11/28_16:32:57 INFO: Running stop for /dev/drbd1 on /shr Filesystem[2829]: 2012/11/28_16:32:57 INFO: Trying to unmount /shr Filesystem[2829]: 2012/11/28_16:32:58 INFO: unmounted /shr successfully Filesystem[2823]: 2012/11/28_16:32:58 INFO: Success ResourceManager[2751]: 2012/11/28_16:32:58 info: Running /etc/ha.d/resource.d/drbddisk r0 stop ResourceManager[2751]: 2012/11/28_16:32:58 info: Running /etc/ha.d/resource.d/IPaddr 10.1.10.254 stop IPaddr[2971]: 2012/11/28_16:32:58 INFO: ifconfig eth0:0 down IPaddr[2958]: 2012/11/28_16:32:58 INFO: Success Nov 28 16:32:58 EMserver1 heartbeat: [2734]: info: All HA resources relinquished. Nov 28 16:32:59 EMserver1 heartbeat: [1695]: info: killing /usr/lib/heartbeat/ipfail process group 1807 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBFIFO process 1777 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBWRITE process 1778 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBREAD process 1779 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBWRITE process 1780 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBREAD process 1781 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBWRITE process 1782 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBREAD process 1783 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBWRITE process 1784 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBREAD process 1785 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBWRITE process 1786 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBREAD process 1787 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1778 exited. 11 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1779 exited. 10 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1780 exited. 9 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1781 exited. 8 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1782 exited. 7 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1783 exited. 6 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1784 exited. 5 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1785 exited. 4 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1786 exited. 3 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1787 exited. 2 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1777 exited. 1 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: emserver1 Heartbeat shutdown complete. If I restarted heartbeat at this point... the resources heartbeat controls would start up fine.... please help!

  Read the article

• Spam bot constantly hitting our site 800-1,000 times a day. Causing loss in sales

  - by akaDanPaul

  For the past 5 months our site has been receiving hits from these 4 sites below; sheratonbd.com newsheraton.com newsheration.com newsheratonltd.com Typically the exact url they come from looks something like this; http://www.newsheraton.com/ClickEarnArea.aspx?loginsession_expiredlogin=85 The spam bot goes to our homepage and stays there for about 1 min and then exist. Luckily we have some pretty beefy servers so it hasn't even come close to overloading our servers yet. Last month I started blocking the IP address's of the spam bots but they seem to keep getting new ones everyday. So far I have blocked over 200 IP address's, below are a few of the ones I have blocked. They all come from Bangladesh. 58.97.238.214 58.97.149.132 180.234.109.108 180.149.31.221 117.18.231.5 117.18.231.12 Since this has been going on for the past 5 months our real site traffic has started to drop, and everyday our orders get lower and lower. Also since these spam bots simply go to our homepage and then leave our bounce rate in analytics has sky rocketed. My questions are; Is it possible that these spam bots are affecting our SEO? 60% of our orders come from natural search, and since this whole thing has started orders have slowly been dropping. What would be the reason someone would want to waste resources in doing this to our site? IP's aren't free and either are domain names, what would be the goal in doing this to us? We have google adwords but don't advertise on extended networks nor advertise in Bangladesh since we don't ship there so they are not making money on adsense. Has anyone experienced anything similar to this? What did you do and what was the final out come?

  Read the article

• Setting up Cluster Configuration using an existing web server as a Primary Node?

  - by RapidWebs

  Thanks in advance for any help which is issued! I am having a slight issue, and need help with the decision making process when it comes to setting up my Cluster Configuration, consisting on a line of Ubuntu Servers (12.04). We currently have a Primary node, which resides in the US within a Datacenter, but we are going to be using this for all serious bandwidth and resource intensive websites, and through a configuration of Virtualmin + Webmin, will be setup as a sort of pseudo-cluster, using Virtualmins Cluster Modules. Anyways, on to the issue: We also have a business line setup locally, with three servers. here are their specs: Intel P4 2.4 ghz, 1GB Ram, 110 gb sata, Ubuntu 12.04* AMD 1.3 ghz, 512MB Ram, 20 GB IDE P3 Xeon 800mhz (dual physical processors), 1GB Ram, 3 * 25 GB Raid Configuration (one in use for host operating system). The first machine is currently IN USE and is serving virtual hosts off a sub-domain. My question is this: How can I integrate the Secondary node (which will be the Primary node per say, in this smaller configuration...) which is currently in use, into the cluster configuration w/ the other two servers for: Sharing Resources Redundancy (HA?) NFS /w the two Raid Disks without having the FORMAT the secondary node, and start fresh moving all my services in to a DRBD network drive or something similar, and than restoring all active virtualmin's Virtual hosts. the idea is that I want minimal downtime to people currently being served from server2.mywebsite.com, and from what I understand, all services need to be on a NFS so that they can be mounted on demand and accessed from the other machine taking over (i.e. Heartbeat + DRBD Config.) but my issue is that i already have all these services installed to their default directory structure: how can i most easily setup this NFS and HA system, move all my desires services to this new drive, and do it with minimal down time, and without breaking Virtualmin and everything else on my server? even just some pointers, a thread i could read, or a step by step check list or run down of commands i could issue to get started would be great! thanks!

  Read the article

• Which version management design methodology to be used in a Dependent System nodes?

  - by actiononmail

  This is my first question so please indicate if my question is too vague and not understandable. My question is more related to High Level Design. We have a system (specifically an ATCA Chassis) configured in a Star Topology, having Master Node (MN) and other sub-ordinate nodes(SN). All nodes are connected via Ethernet and shall run on Linux OS with other proprietary applications. I have to build a recovery Framework Design so that any software entity, whether its Linux, Ramdisk or application can be rollback to previous good versions if something bad happens. Thus I think of maintaining a State Version Matrix over MN, where each State(1,2....n) represents Good Kernel, Ramdisk and application versions for each SN. It may happen that one SN version can dependent on other SN's version. Please see following diagram:- So I am in dilemma whether to use Package Management Methodology used by Debian Distributions (Like Ubuntu) or GIT repository methodology; in order to do a Rollback to previous good versions on either one SN or on all the dependent SNs. The method should also be easier for upgrading SNs along with MNs. Some of the features which I am trying to achieve:- 1) Upgrade of even single software entity is achievable without hindering others. 2) Dependency checks must be done before applying rollback or upgrade on each of the SN 3) User Prompt should be given in case dependency fails.If User still go for rollback, all the SNs should get notification to rollback there own releases (if required). 4) The binaries should be distributed on SNs accordingly so that recovery process is faster; rather fetching every time from MN. 5) Release Patches from developer for bug fixes, feature enhancement can be applied on running system. 6) Each version can be easily tracked and distinguishable. Thanks

  Read the article

• Choosing a JavaScript Asynch-Loader

  - by Prisoner ZERO

  I’ve been looking at various asynchronous resource-loaders and I’m not sure which one to use yet. Where I work we have disparate group-efforts whose class-modules may use different versions of jQuery (etc). As such, nested dependencies may differ, as well. I have no control over this, so this means I need to dynamically load resources which may use alternate versions of the same library. As such, here are my requirements: Load JavaScript and CSS resource files asynchronously. Manage dependency-order and nested-dependencies across versions. Detect if a resource is already loaded. Must allow for cross-domain loading (CDN's) (optional) Allow us to unload a resource. I’ve been looking at: Curl RequireJS JavaScriptMVC LABjs I might be able to fake these requirements myself by loading versions into properly-namespaced variables & using an array to track what is already loaded...but (hopefully) someone has already invented this. So my questions are: Which ones do you use? And why? Are there others that my satisfy my requirements fully? Which do you find most eloquent and easiest to work with? And why?

  Read the article

• Using Hidden Markov Model for designing AI mp3 player

  - by Casper Slynge

  Hey guys. Im working on an assignment, where I want to design an AI for a mp3 player. The AI must be trained and designed with the use of a HMM method. The mp3 player shall have the functionality of adapting to its user, by analyzing incoming biological sensor data, and from this data the mp3 player will choose a genre for the next song. Given in the assignment is 14 samples of data: One sample consist of Heart Rate, Respiration, Skin Conductivity, Activity and finally the output genre. Below is the 14 samples of data, just for you to get an impression of what im talking about. Sample HR RSP SC Activity Genre S1 Medium Low High Low Rock S2 High Low Medium High Rock S3 High High Medium Low Classic S4 High Medium Low Medium Classic S5 Medium Medium Low Low Classic S6 Medium Low High High Rock S7 Medium High Medium Low Classic S8 High Medium High Low Rock S9 High High Low Low Classic S10 Medium Medium Medium Low Classic S11 Medium Medium High High Rock S12 Low Medium Medium High Classic S13 Medium High Low Low Classic S14 High Low Medium High Rock My time of work regarding HMM is quite low, so my question to you is if I got the right angle on the assignment. I have three different states for each sensor: Low, Medium, High. Two observations/output symbols: Rock, Classic In my own opinion I see my start probabilities as the weightened factors for either a Low, Medium or High state in the Heart Rate. So the ideal solution for the AI is that it will learn these 14 sets of samples. And when a users sensor input is received, the AI will compare the combination of states for all four sensors, with the already memorized samples. If there exist a matching combination, the AI will choose the genre, and if not it will choose a genre according to the weightened transition probabilities, while simultaniously updating the transition probabilities with the new data. Is this a right approach to take, or am I missing something ? Is there another way to determine the output probability (read about Maximum likelihood estimation by EM, but dont understand the concept)? Best regards, Casper

  Read the article

• Accessing bitmap array in another class? C#

  - by Marius Mathisen

  I have this array : Bitmap[] bildeListe = new Bitmap[21]; bildeListe[0] = Properties.Resources.ål; bildeListe[1] = Properties.Resources.ant; bildeListe[2] = Properties.Resources.bird; bildeListe[3] = Properties.Resources.bear; bildeListe[4] = Properties.Resources.butterfly; bildeListe[5] = Properties.Resources.cat; bildeListe[6] = Properties.Resources.chicken; bildeListe[7] = Properties.Resources.dog; bildeListe[8] = Properties.Resources.elephant; bildeListe[9] = Properties.Resources.fish; bildeListe[10] = Properties.Resources.goat; bildeListe[11] = Properties.Resources.horse; bildeListe[12] = Properties.Resources.ladybug; bildeListe[13] = Properties.Resources.lion; bildeListe[14] = Properties.Resources.moose; bildeListe[15] = Properties.Resources.polarbear; bildeListe[16] = Properties.Resources.reke; bildeListe[17] = Properties.Resources.sheep; bildeListe[18] = Properties.Resources.snake; bildeListe[19] = Properties.Resources.spider; bildeListe[20] = Properties.Resources.turtle; I want that array and it´s content in a diffenrent class, and access it from my main form. I don´t know if should use method, function or what to use with arrays. Are there some good way for me to access for instanse bildeListe[0] in my new class?

  Read the article

• Current Motherboard Tech Overview

  - by Ian

  Welp, computer died. Time to get a new motherboard. I haven't been paying attention to the latest motherboard technology and associated models and chipsets. Can someone point me at an overview of what is currently available? I'm primarily interested in the Intel / nvidia side of things.

  Read the article

• Nginx php-fpm high cpu usage

  - by Piotr Kaluza

  I have a problem with a high traffic wordpress, super high CPU load under nginx php-fpm, I am caching with apc, and memcached, spent 2-3 days tweaking configs and looking for answers it seems to me that php-fpm takes up all the cpu available no matter how many max_children i set if i set 5 then the load is 20% each, if i set 20 then the load adds up till 90% i tried static and dynamic server is 2x3.0Ghz 6GB Ram SSD in raid 10 on ubuntu 12.04 x64 utpime: 17:27:51 up 2:19, 1 user, load average: 29.79, 28.08, 26.29 what can be the issue?

  Read the article

• CPU, Memory, Network, IO resources are under utilized when I tried various JMeter load testing

  - by Jaiganesh

  CPU, Memory, Network, IO resources are under utilized when I tried various JMeter load testing. I have given below the details. Hardware: 1 Core with 2 GB RAM OS: Ubuntu 12.04 LTS Server Edition Application: PHP (using JQuery, Ajax) JMeter Parameters: 10, 20, 30, 40 Hits per minute 220 Test Cases per hit 2.03 MB per hit I am not clear, why these resources are under utilized. Please help me to resolve this.

  Read the article

• Federated access to desktop and network resources in MS AD domains

  - by Glenn Stauffer

  We are looking for a way to provide members of three loosely connected organizations with access to authenticated resources such as file shares, printers, and lab computers. I've seen federation facilities for web resources; is ther something similar for domain logins? Our Active directory domains are not connected so we would have to use email addresses for the username to insure uniqueness. Is there any openid like mechanism that works for AD logins?

  Read the article

• Puppet master and resources graph

  - by jrottenberg

  Hello ! I've setup rrd reporting + graph on my puppet master, my nodes report as expected and I can see the 'changes' and 'time' graphs, but I miss the 'resources' (html and daily weekly monthly yearly graphs) elements. Note resources.rrd files are there, just puppetmaster does not generate the html and png

  Read the article

• Setting up podcasting for a non-tech user

  - by Force Flow

  I have a user who wants to start making podcasts, but they only have basic skills when it comes to technology. So, I was trying to get a process together that would be easy for them to follow. To upload files (the mp3's and rss feed files), I have an explorer shortcut for their FTP space. To record the podcast, I was going to either use audacity or PodProducer. For the RSS feed, I was looking for a podcast RSS generator of some sort. In my search for this, I've come across a lot of dead links and a lot of paid tools, so I haven't come up with anything too useful. Is there a free, reliable webservice or windows-based tool available that folks like to use?

  Read the article

• SQLS Timeouts - High Reads in Profiler

  - by lb01

  I've audited a SQLS2008 server with Profiler for one day.. the overhead didn't seem to trouble this new client my company has. They are using a legacy VB6 application as a front-end. They're experiencing timeouts once SQLS RAM usage is high. The server is currently running x64 sqls2008 on a VM with nearly 9 GB of RAM. SQL Server's 'max server memory option' is currently set to 6GB. I've put the results of the trace in a table and queried them using this query. SELECT TextData, ApplicationName, Reads FROM [TraceWednesday] WHERE textdata is not null and EventClass = 12 GROUP BY TextData, ApplicationName, Reads ORDER BY Reads DESC As I expected, some values are very high. Top Reads, in pages. 2504188 1965910 1445636 1252433 1239108 1210153 1088580 1072725 Am I correct in thinking that the top one (2504188 pages) is 20033504 KB, which then is roughly ~20'000 MB, 20GB? These queries are often executed and can take quite some time to run. Eventually RAM is used up because of the cache fattening, and timeouts occur once SQL cannot 'splash' pages in the buffer pool as much. Costs go up. Am I correct in my understanding? I've read that I should tune the associated T-SQL and create appropriate indices. Obviously cutting down the I/O would make SQL Server use less RAM. OR, maybe it might just slow down the process of chewing up the whole RAM. If a lot less pages are read, maybe it'll all run much better even when usage is high? (less time swapping, etc.) Currently, our only option is to restart SQL once a week when RAM usage is high, suddenly the timeouts disappear. SQL breathes again. I'm sure lots of DBAs have been in this situation.. I'm asking before I start digging out all of the bad T-SQL and put indices here and there, is there is something else I can do? Any advice except from what I know (not much yet..) Much appreciated. Leo.

  Read the article

• SQLS Timeouts - High Reads in Profiler

  - by lb01

  Hi I've audited a SQLS2008 server with Profiler for one day.. the overhead didn't seem to trouble this new client my company has. They are using a legacy VB6 application as a front-end. They're experiencing timeouts once SQLS RAM usage is high. The server is currently running x64 sqls2008 on a VM with nearly 9 GB of RAM. SQL Server's 'max server memory option' is currently set to 6GB. I've put the results of the trace in a table and queried them using this query. SELECT TextData, ApplicationName, Reads FROM [TraceWednesday] WHERE textdata is not null and EventClass = 12 GROUP BY TextData, ApplicationName, Reads ORDER BY Reads DESC As I expected, some values are very high. Top Reads, in pages. 2504188 1965910 1445636 1252433 1239108 1210153 1088580 1072725 Am I correct in thinking that the top one (2504188 pages) is 20033504 KB, which then is roughly ~20'000 MB, 20GB? These queries are often executed and can take quite some time to run. Eventually RAM is used up because of the cache fattening, and timeouts occur once SQL cannot 'splash' pages in the buffer pool as much. Costs go up. Am I correct in my understanding? I've read that I should tune the associated T-SQL and create appropriate indices. Obviously cutting down the I/O would make SQL Server use less RAM. OR, maybe it might just slow down the process of chewing up the whole RAM. If a lot less pages are read, maybe it'll all run much better even when usage is high? (less time swapping, etc.) Currently, our only option is to restart SQL once a week when RAM usage is high, suddenly the timeouts disappear. SQL breathes again. I'm sure lots of DBAs have been in this situation.. I'm asking before I start digging out all of the bad T-SQL and put indices here and there, is there is something else I can do? Any advice except from what I know (not much yet..) Much appreciated. Leo.

  Read the article

• Suggestions on switching from lamp based web design-development to game design-development

  - by Sandeepan Nath

  I have around 2.5 years of experience as a web developer cum designer working mainly on the LAMP platform. Now, I want to try out game development (of the likes of First Person Shooter games like Call of Duty (COD)). It is one of my dreams to some day succeed in making a profitable, popular, commercial game of this type. However, I have never done any kind of business nor even freelancing yet even in the web domain. Okay, first things first, I am just starting and I don't yet have any idea about the technologies, languages, engines (game engines) etc involved in that. I would like this question to be a complete guide for people with similar interests. Best resources for getting hold really fast What would be the best approach to get the basic hold of the domain really fast? Any resource(s) for programmers coming from other domains/experienced in other domains would be the ideal ones for me. E.g., if anybody would ask me some good resource for quickly learning PHP/Mysql, I would suggest books like "How to do everything with PHP & MySql" - because - it introduces all the basics of the domain (not the advanced things which can be later learnt by practice and also a lot by searching in stackoverflow questions) it contains some very nice working projects in the end, which help in applying the skills learnt in the chapters of the book. This is the best way for self learners, I feel. I would appreciate some similar resource which connects all concepts together to get the bigger picture. I have read about C, C++, C#, JAVA being used in game programming but not sure which language to go for (I have previously learnt a little of C and JAVA). I have also read about game engines but there would be various other concepts. Commonly accepted ways of learning Should 3D games like these be tried after 2D games? Are there some commonly accepted ways of learning such kind of games? Like in web development, we should go for frameworks after practising well with basic language, AJAX after getting properly done with simple page-reload processing etc. Apart from these, any useful tips (like language choices etc.) would be much appreciated. Like it is highly recommended to contribute to open source web projects for getting recognition, are there similar open source game projects? Thanks, Sandeepan

  Read the article

• How to packing Resources in Maven Project?

  - by Rehman

  I am looking for suggestion in putting image file maven web project. One of classes under src/main/java need to use an image file. My problem is, if i put image file under src/main/webapp/images then application server cannot find that path on runtime(where myeclipse can ) because war archive do not have specified path "src/main/webapp/images". My question is where should i put the image file that my project can find it without prompting any error or exception. I am using Java Web Application with Mavenized falvour MyEclipse 10 Application Server: JBoss 6 Currently i do have following dir structure Project Directory Structure -src/main/java -- classes -src/main/resources -- applicationContext.xml -src/test/java -- test classes -src/test/resources (nothing) -src -- main --- webapp --WEB-INF --Images --Css --Meta-INF -target -pom.xml And pom.xml's build snippet is as follows <build> <sourceDirectory>${basedir}/src/main/java</sourceDirectory> <outputDirectory>${basedir}/target/${project.artifactId}/classes</outputDirectory> <resources> <resource> <directory>${basedir}/src/main/resources</directory> <excludes> <exclude>**/*.java</exclude> </excludes> </resource> </resources> <testResources> <testResource> <directory>${basedir}/src/test/resources</directory> </testResource> </testResources> <finalName>${project.artifactId}</finalName> <plugins> <plugin> <artifactId>maven-compiler-plugin</artifactId> <configuration> <source>${jdk.version}</source> <target>${jdk.version}</target> <optimize>true</optimize> <useProjectReferences>true</useProjectReferences> </configuration> </plugin> <plugin> <artifactId>maven-war-plugin</artifactId> <version>2.1.1</version> <configuration> <warSourceDirectory>${basedir}/src/main/webapp</warSourceDirectory> <webResources> <resource> <directory>${basedir}/src/main/resources</directory> </resource> </webResources> </configuration> </plugin> </plugins> </build> Thanks in advance

  Read the article

• Our Oracle Recruitment Team is Growing - Multiple Job Opportunities in Bangalore, India

  - by david.talamelli

  DON"T GET STUCK IN THE MATRIXSEE YOUR FUTUREVISIT THE ORACLE The position(s): CORPORATE RECRUITING RESEARCH ANALYST(S) ABOUT ORACLE Oracle's business is information--how to manage it, use it, share it, protect it. For three decades, Oracle, the world's largest enterprise software company, has provided the software and services that allow organizations to get the most up-to-date and accurate information from their business systems. Only Oracle powers the information-driven enterprise by offering a complete, integrated solution for every segment of the process industry. When you run Oracle applications on Oracle technology, you speed implementation, optimize performance, and maximize ROI. Great hiring doesn't happen by accident; it's the culmination of a series of thoughtfully planned and well executed events. At the core of any hiring process is a sourcing strategy. This is where you come in... Do you want to be a part of a world-class recruiting organization that's on the cutting edge of technology? Would you like to experience a rewarding work environment that allows you to further develop your skills, while giving you the opportunity to develop new skills? If you answered yes, you've taken your first step towards a future with Oracle. We are building a Research Team to support our North America Recruitment Team, and we need creative, smart, and ambitious individuals to help us drive our research department forward. Oracle has a track record for employing and developing the very best in the industry. We invest generously in employee development, training and resources. Be a part of the most progressive internal recruiting team in the industry. For more information about Oracle, please visit our Web site at http://www.oracle.com Escape the hum drum job world matrix, visit the Oracle and be a part of a winning team, apply today. POSITION: Corporate Recruiting Research Analyst LOCATION: Bangalore, India RESPONSIBILITIES: •Develop candidate pipeline using Web 2.0 sourcing strategies and advanced Boolean Search techniques to support U.S. Recruiting Team for various job functions and levels. •Engage with assigned recruiters to understand the supported business as well as the recruiting requirements; partner with recruiters to meet expectations and deliver a qualified pipeline of candidates. •Source candidates to include both active and passive job seekers to provide a strong pipeline of qualified candidates for each recruiter; exercise creativity to find candidates using Oracle's advanced sourcing tools/techniques. •Fully evaluate candidate's background against the requirements provided by recruiter, and process leads using ATS (Applicant Tracking System). •Manage your efforts efficiently; maintain the highest levels of client satisfaction as well as strong operations and reporting of research activities. PREFERRED QUALIFICATIONS: •Fluent in English, with excellent written and oral communication skills. •Undergraduate degree required, MBA or Masters preferred. •Proficiency with Boolean Search techniques desired. •Ability to learn new software applications quickly. •Must be able to accommodate some U.S. evening hours. •Strong organization and attention to detail skills. •Prior HR or corporate in-house recruiting experiences a plus. •The fire in the belly to learn new ideas and succeed. •Ability to work in team and individual environments. This is an excellent opportunity to join Oracle in our Bangalore Offices. Interested applicants can send their resume to [email protected] or contact David on +61 3 8616 3364

  Read the article

• High CPU usage by 'svchost.exe' and 'coreServiceShell.exe'

  - by kush.impetus

  I am having a laptop running on Windows 7 Ultimate 32-bit. Since past few days, my laptop is facing a serious problem. Whenever I connect to Internet, either svchost.exe or coreServiceShell.exe or both hog the CPU. The coreServiceShell.exe consumes a lot of RAM also. Going into the details, I found that high CPU usage of svchost.exe is caused by Network Location Awareness service. And the high CPU usage of coreServiceShell.exe is caused by Trend Micro Titanium Internet Security 2012. That kind'a makes me think that Trend Micro may be the root of the problem. After further testing, I found that if I use IE or Firefox to browse the Internet, immediately after connecting to Internet, things are normal. See and But if I use Google Chrome, the coreServiceShell.exe hogs both CPU and RAM. At this point, if I disconnect the Internet, the CPU and RAM usage by coreServiceShell.exe continues to be high till I close the Chrome. Also, when I close the Chrome, while Internet is connected, svchost.exe continues to hog CPU but coreServiceShell.exe leaves the race. That makes think that Chrome is the root of the problem, but again, tracing coreServiceShell.exe takes me back to Trend Micro Internet Security. Stopping the Protection by the Trend Micro Internet Security doesn't help either (I am not able to stop its services though). I have updated the Chrome, but no help. I just can't figure out who is the culprit. I can't do without the Google Chrome (of course, by not using it) because of its immensely useful and indispensable features both during browsing and development. Secondly, I can't uninstall the Trend Micro Internet security Suite since it still has few months before it expires and is proving me reliable protection. What could be the cause of the problem and what can I do to resolve this? Thanks in advance

  Read the article

• Puppet: array in parameterized classes VS using resources

  - by Luke404

  I have some use cases where I want to define multiple similar resources that should end up in a single file (via a template). As an example I'm trying to write a puppet module that will let me manage the mapping between MAC addresses and network interface names (writing udev's persistent-net-rules file from puppet), but there are also many other similar usage cases. I searched around and found that it could be done with the new parameterised classes syntax: if implemented that way it should end up being used like this: node { "myserver.example.com": class { "network::iftab": interfaces => { "eth0" => { "mac" => "ab:cd:ef:98:76:54" } "eth1" => { "mac" => "98:76:de:ad:be:ef" } } } } Not too bad, I agree, but it would rapidly explode when you manage more complex stuff (think network configurations like in this module or any other multiple-complex-resources-in-a-single-config-file stuff). In a similar question on SF someone suggested using Pienaar's puppet-concat module but I doubt it could get any better than parameterised classes. What would be really cool and clean in the configuration definition would be something like the included host type, it's usage is simple, pretty and clean and naturally maps to multiple resources that will end up being configured in a single place. Transposed to my example it would be like: node { "myserver.example.com": interface { "eth0": "mac" => "ab:cd:ef:98:76:54", "foo" => "bar", "asd" => "lol", "eth1": "mac" => "98:76:de:ad:be:ef", "foo" => "rab", "asd" => "olo", } } ...that looks much better to my eyes, even with 3x options to each resource. Should I really be passing arrays to parameterised classes, or there is a better way to do this kind of stuff? Is there some accepted consensus in the puppet [users|developers] community? By the way, I'm referring to the latest stable release of the 2.7 branch and I am not interested in compatibility with older versions.

  Read the article

• High latency issue for web service call from amazon aws ec2 to local server

  - by SibzTer

  We have a legacy web application that is running in our data center on premises located in Houston. We have a developed a new .net 4 based web application in order to provide new features to customers. The new web application is hosted in amazon aws ec2 environment (N. Virginia region us-east-1b zone). In order to get seamlessly integrate with the legacy application the new web application makes web service calls to retrieve data. We are seeing an unusually high latency time in the order of 5+ seconds for these web service calls. The exact same web service call returns in less than a second on our local PCs (which makes sense given physical proximity to the actual server). The weird part is that we have developers in California who also have the same milliseconds response time. We are testing the web service response using third party tools such as SoapUI, Google Chrome extensions such as Advanced REST Client, Postman REST Client, etc. As if this wasnt weird enough, we have noticed the same low latency from certain other ec2 instances while testing which are in the same region and availability zone as well. If we experienced the high latency consistently from all the ec2 instances I could understand. But there is something else going on. Comparing the various stats and results between the low latency and high latency ec2 servers do not show any significant differences: ping (constant 40ms), tracert, winmtr, etc. We have instances that are in the VPC as well. So I tried both the public and private IP address of the web service host server and that didnt make a difference either for the above results. We need to resolve this latency issue as this is causing the resulting web pages to load very slowly (almost 15+ seconds which is simply unacceptable). The ec2 instances have Windows Server Datacenter 64 bit. Let me know if there is any other infor I can provide to help diagnose this.

  Read the article

• Windows XP seemingly out of resources but plenty of free RAM and swap available

  - by Artem Russakovskii

  This one has been bothering me for years and so far I couldn't find an adequate solution. The problem occurs on pretty much every XP install I've done. After opening a variety of programs or the system running existing programs for a while, Windows seemingly runs out of resources, without telling me. There's ALWAYS free RAM. For example, it just happened to me and I had over a gig of free RAM. There are no viruses, spyware, or other nonsense - it is a Windows resource problem, but the question is which resource is it running out of, how does one pinpoint it, and how does one prevent it? Sometimes, this happens after running specific programs - for example, today it happened when I started Photoshop CS4 and Flash CS4 at the same time. I also noticed that restarting The Bat (email client by Ritlabs) seems to get rid of this problem for a while but again, this happens on machines that don't even have The Bat installed. So what does exactly happen? The symptoms are: pressing alt-tab doesn't bring up the list anymore - it just jumps to the next window instantly, very similar to the way Alt-Esc works, however in this case, it's due to not having enough resources to bring up the alt-tab menu random programs would randomly crash, citing random errors, out of memory errors, system resources, inabilities to do system calls, etc. random programs would start missing random parts - for example, Firefox top menus might disappear, pull up partial selections, or not pull up anymore altogether. IE might lose a few of its toolbars. Some programs might fail to redraw or would just plain go gray where the UI used to be. Windows itself never complains about running out of RAM, virtual memory, or anything at all, yet it's running out of something. The only clue I was able to find and apply the fix today was this Desktop Heap Limitation. I haven't confirmed the fix working as not enough time passed. In the meantime, what are everyone's thoughts?

  Read the article

• apache2 + mod_fastcgi + suexec + php5.2 = unstable on high load

  I am hosting several (~30) different sites on one server with apache2+fastcgi+suexec+php5. Sites have different loads and different execution times of their scripts (some of them process request for 5-7 seconds, some <1sek). Sometimes when single site receives very high load (all php instances of this site are created and used) - whole apache server hangs. Apache (worker mpm) creates new processes up to the upper limit. It looks like it is starting to queue ALL new request for EVERY site, not only the one that has high load and quickly achieves process limits... restart of apache solves the problem... config: FastCgiConfig -singleThreshold 1 -multiThreshold 10 -listen-queue-depth 30 -maxProcesses 80 -maxClassProcesses 12 -idle-timeout 30 -pass-header HTTP_AUTHORIZATION -pass-header If-Modified-Since -pass-header If-None-Match (earlier have default -listen-queue-depth = 100, but it didn't change anything...) Any suggestions? Another question - how is implemented this listen queue? is it one queue for whole apache, or unique queue for every defined php apllication (suexec site)? I would like to achieve something like this: when one site receives high load and its queue is full - server bounces next request, but only for this one site.. Other sites should work properly...

  Read the article

• DRBD stacked resources: recovering from failure

  - by Marcus Downing

  We're running a stacked four-node DRBD setup like this: A --> B | | v v C D This means three DRBD resources running across these four servers. Servers A and B are Xen hosts running VMs, while servers C and D are for backups. A is in the same datacentre as C. From server A to server C, in the first datacentre, using protocol B From server B to server D, in the second datacentre, using protocol B From server A to server B, different datacentres, stacked resource using protocol A First question: booting a stacked resource We haven't got any vital data running on this setup yet - we're still making sure it works first. This means simulating power cuts, network outages etc and seeing what steps we need to recover. When we pull the power out of server A, both resources go down; it attempts to bring them back up at next boot. However, it only succeeds at bringing up the lower-level resource, A-C. The stacked resource A-B doesn't even try to connect, presumably because it can't find the device until it's a connected primary on the lower level. So if anything goes wrong we need to manually log in and bring that resource up, then start the virtual machine on top of it. Second question: setting the primary of a stacked resource Our lower-level resources are configured so that the right one is considered primary: resource test-AC { on A { ... } on C { ... } startup { become-primary-on A; } } But I don't see any way to do the same with a stacked resource, as the following isn't a valid config: resource test-AB { stacked-on-top-of test-AC { ... } stacked-on-top-of test-BD { ... } startup { become-primary-on test-AC; } } This too means that recovering from a failure requires manual intervention. Is there no way to set the automatic primary for a stacked resource?

  Read the article

• RPC Server Unavailable on Hyper-V cluster when moving resources after the host adapter has failed

  - by Doug Luxem

  On a Windows 2008 R2 SP1 cluster running Hyper-V, a lost network connectivity on the primary host interface. The interface was rapidly flapping up and down, and this was later determined to be caused by a faulty switch port. As this was a clustered server, the host interface was not fault tolerant (seeing as how the whole server was fault tolerant), so connectivity to the host was going up and down. The Hyper-V guests were completely unaffected by the network outage as they used a dedicated trunk on the server separate from the host interface. Additionally, dedicated interfaces for the cluster and live migration networks were fine. In order to diagnose the server, I tried to move all resources (Hyper-V Guests) to other nodes through Failover Cluster Manager. These moves failed with an error RPC Server Unavailable. The only way to move resources was by shutting down the guests, stopping the cluster service on the Node A, allowing other nodes to take ownership of the resources, and restarting the guests. A few other notes: All nodes have Client for MS Networks and File & Printer Sharing enabled on the Cluster and LM networks. Node A was accessible over cluster and LM networks from other nodes (these are private, cluster-only networks); pingable, CIFs, etc. Accessing \\NODEA is done over the Host adapters, as you would expect in this case and is the reason for the RPC Server Unavailable error with that adapter being down. My questions here are - Is there a way to still use Live Migration in a failure scenario such as this to prevent shutting down the Hyper-V guests? How can the network be reconfigured in the future so that the cluster service attempts to use the cluster and/or live migration networks to issue the RPC requests?

  Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >