Search Results

Search found 23950 results on 958 pages for 'ie8 64 bit'.

Page 32/958 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

  • Mysterious Windows 7 slowdown problem

    - by cletus
    I have a fairly beefy machine: Intel Q9450 8GB DDR2800 (4x2) Intel X25-M G2 80GB SSD Several other hard drives Windows 7 Ultimate 64 In the last month I've gotten a mysterious slowdown problem. When I start my IDE (IntelliJ IDEA) it usually takes about 20 seconds on the SSD. If my machine has been on for a day or two (as far as I can tell this is the only pattern) and I try to start the IDE, it brings my machine to a halt. CPU usage goes up to 25% per core (so it's basically 100% usage) and it takes up to 5 minutes to start. Other things I've noticed: iTunes will start to skip and stutter (my music is running off a second hard drive). The only persistent things I'm running are: AVG Anti-Virus Spybot (the slowdown predates this) Hamachi and Murmur (again the slowdown predates this) Apple Airport Base Agent HP OfficeJet 8500 driver/manager The browser I use is Chrome. I can't think why that'd be relevant but it's always on so I thought I'd mention it. When this happens I can't see a reason for it in the process list. No CPU hogs. No spikes in IO activity that I can see. Basically I'm at a loss to explain it and need to reboot, at which point everything returns to normal (for awhile). FWIW the Intel SSD is about 75-80% full. I know being too full can really degrade performance. I don't believe that's the issue here. Does anyone have any ideas on what I can do to fix this or at least help find what's going wrong? This same machine (sans SSD) could run Win XP and stay up fine for a month or two.

    Read the article

  • 2560 x 1600 screen resolution not available when a second monitor is attached.

    - by sgmoore
    I am running Windows 7 (64-bit edition) and have a 30" Dell 3007WFP monitor which runs at a screen resolution of 2560 x 1600. This works perfectly until I try to connect a second monitor, and then the screen resolution on the main monitor immediately drops to 1280x800 and I can't change it back up to the correct resolution until I disconnect the second monitor. The graphics card is a Nvidia Quadro FX 370. This has a dual link DVI connector (to which the 30" is connected) and a single link DVI connector. The second monitor can run at 1920x1080 and is connected using a VGA to DVI connector. Note, it does not seem to matter whether the second monitor is running at 1920x1080 or even at 800x600. Windows reports Total Available Graphics Memory: 3839MB Dedicated Video Memory: 256MB System Video Memory: 0MB Shared System Memory: 3583MB Does anyone know if this a limitation with the video card, memory, drivers, connectors or something else? If this is a limitation with the video card, can anyone recommend a PCI Express 16 card that would support at least this setup, but preferably support two 30" monitors both running 2560 x 1600. (I'm not into gaming etc, so it doesn't need to be very powerful)

    Read the article

  • Debian x86_64 + Nginx + PHP5-FPM optimization

    - by Olal'a
    I used to have a VPS (512MB) from Linode and I was running nginx + php5-fpm (which comes with php5.3.3) on Debian Lenny (i686). The total memory usage was about 90-100MB. Now I have another VPS (different hosting company) and I also run nginx + php5-fpm on Debian Lenny (x86_64). The system is 64-bit, so the memory usage is higher now, about 210-230MB, which I think is too much. Here is my php5-fpm.conf: pm = dynamic pm.max_children = 5 pm.start_servers = 2 pm.min_spare_servers = 2 pm.max_spare_servers = 5 pm.max_requests = 300 That's what top command tells me: top - 15:36:58 up 3 days, 16:05, 1 user, load average: 0.00, 0.00, 0.00 Tasks: 209 total, 1 running, 208 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni, 99.9%id, 0.1%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 532288k total, 469628k used, 62660k free, 28760k buffers Swap: 1048568k total, 408k used, 1048160k free, 210060k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 22806 www-data 20 0 178m 67m 31m S 1 13.1 0:05.02 php5-fpm 8980 mysql 20 0 241m 55m 7384 S 0 10.6 2:42.42 mysqld 22807 www-data 20 0 162m 43m 22m S 0 8.3 0:04.84 php5-fpm 22808 www-data 20 0 160m 41m 23m S 0 8.0 0:04.68 php5-fpm 25102 www-data 20 0 151m 30m 21m S 0 5.9 0:00.80 php5-fpm 10849 root 20 0 44100 8352 1808 S 0 1.6 0:03.16 munin-node 22805 root 20 0 145m 4712 1472 S 0 0.9 0:00.16 php5-fpm 21859 root 20 0 66168 3248 2540 S 1 0.6 0:00.02 sshd 21863 root 20 0 66028 3188 2548 S 0 0.6 0:00.06 sshd 3956 www-data 20 0 31756 3052 928 S 0 0.6 0:06.42 nginx 3954 www-data 20 0 31712 3036 928 S 0 0.6 0:06.74 nginx 3951 www-data 20 0 31712 3008 928 S 0 0.6 0:06.42 nginx 3957 www-data 20 0 31688 2992 928 S 0 0.6 0:06.56 nginx 3950 www-data 20 0 31676 2980 928 S 0 0.6 0:06.72 nginx 3955 www-data 20 0 31552 2896 928 S 0 0.5 0:06.56 nginx 3953 www-data 20 0 31552 2888 928 S 0 0.5 0:06.42 nginx 3952 www-data 20 0 31544 2880 928 S 0 0.5 0:06.60 nginx So, the question is there any way to use less memory? Btw, I have 16 cores and it would be nice to make use of them...

    Read the article

  • Unable to sync iPod Touch with my PC

    - by alex
    I'm trying to sync a first gen iPod Touch to my PC running Windows 7 64 bit. The problem is that whenever I connect the iPod, iTunes completely freezes (if I start iTunes after connecting the iPod it will simply hang until it's physically disconnected from the PC). I reinstalled iTunes thinking that it had been corrupted, but without any luck. I've had this problem with all the latest versions of iTunes. I've also tried using MediaMonkey and DoubleTwist. None of these apps see the iPod as being connected; DoubleTwist also freezes, just like iTunes. The really strange thing is that I was able to sync the iPod with this PC a while back, but I now seem to have lost that ability. I don't know what changed. Windows detects the device every time it's plugged in (I can see it in Device Manager and I can browse all photos on iPod as if it were a camera). Also, I can sync it to iTunes on Mac OS X without any major problems.

    Read the article

  • Debian x86_64 + Nginx + PHP5-FPM optimization

    - by user55859
    I used to have a VPS (512MB) from Linode and I was running nginx + php5-fpm (which comes with php5.3.3) on Debian Lenny (i686). The total memory usage was about 90-100MB. Now I have another VPS (different hosting company) and I also run nginx + php5-fpm on Debian Lenny (x86_64). The system is 64-bit, so the memory usage is higher now, about 210-230MB, which I think is too much. Here is my php5-fpm.conf: pm = dynamic pm.max_children = 5 pm.start_servers = 2 pm.min_spare_servers = 2 pm.max_spare_servers = 5 pm.max_requests = 300 That's what top command tells me: top - 15:36:58 up 3 days, 16:05, 1 user, load average: 0.00, 0.00, 0.00 Tasks: 209 total, 1 running, 208 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni, 99.9%id, 0.1%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 532288k total, 469628k used, 62660k free, 28760k buffers Swap: 1048568k total, 408k used, 1048160k free, 210060k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 22806 www-data 20 0 178m 67m 31m S 1 13.1 0:05.02 php5-fpm 8980 mysql 20 0 241m 55m 7384 S 0 10.6 2:42.42 mysqld 22807 www-data 20 0 162m 43m 22m S 0 8.3 0:04.84 php5-fpm 22808 www-data 20 0 160m 41m 23m S 0 8.0 0:04.68 php5-fpm 25102 www-data 20 0 151m 30m 21m S 0 5.9 0:00.80 php5-fpm 10849 root 20 0 44100 8352 1808 S 0 1.6 0:03.16 munin-node 22805 root 20 0 145m 4712 1472 S 0 0.9 0:00.16 php5-fpm 21859 root 20 0 66168 3248 2540 S 1 0.6 0:00.02 sshd 21863 root 20 0 66028 3188 2548 S 0 0.6 0:00.06 sshd 3956 www-data 20 0 31756 3052 928 S 0 0.6 0:06.42 nginx 3954 www-data 20 0 31712 3036 928 S 0 0.6 0:06.74 nginx 3951 www-data 20 0 31712 3008 928 S 0 0.6 0:06.42 nginx 3957 www-data 20 0 31688 2992 928 S 0 0.6 0:06.56 nginx 3950 www-data 20 0 31676 2980 928 S 0 0.6 0:06.72 nginx 3955 www-data 20 0 31552 2896 928 S 0 0.5 0:06.56 nginx 3953 www-data 20 0 31552 2888 928 S 0 0.5 0:06.42 nginx 3952 www-data 20 0 31544 2880 928 S 0 0.5 0:06.60 nginx So, the question is there any way to use less memory? Btw, I have 16 cores and it would be nice to make use of them...

    Read the article

  • Windows 7 loses correct time zone upon reboot

    - by Android Eve
    I have a standard PC running Windows 7 Ultimate (64-bit). For some reason, it refuses to keep the correct time zone (the BIOS battery is OK) when restarted. Note (1): The Time zone is correct. The "Internet Time" tab also shows "this computer is set to automatically synchronize with 'time.windows.com'. When I click the 'Change settings...' button, the 'Synchronize with an Internet time server' checkbox is checked. Still, upon reboot, the time is skewed by 6 hours... and doesn't correct itself even after waiting hours for this "automatically synchronize" to occur. Note (2): The BIOS time is set to local (i.e. not UTC). When I restart Windows 7 without booting to the other OS installed in dual-boot config (Ubuntu Linux), it seems to correctly remember the time. This may explain immediate time upon reboot, but it doesn't explain why Windows 7 won't automatically 'Synchronize with an Internet time server' even after an hour. Why is this happening and how do I correct this?

    Read the article

  • Alternative Bluetooth Stacks for Windows 7 64bit

    - by Martin
    I have a notebook with an inbuilt Broadcom BCM2046 bluetooth adapter and several bluetooth HID-devices (mice, keyboards etc.) The operating system is Windows 7 64 bit Professional. The HID-devices all work perfectly with other computers, but on the system mentionend above, problems with some power-saving features inside the HID-devices occur (see eg. Amazon reviews for Microsoft Mobile Keyboard 6000 not waking up). I have tried the bluetooth drivers supplied by Windows update and the latest Broadcom drivers directly from the Broadcom updater software. The problems persist (I can rule out any further configuration issues or alternative device drivers, I have tried every possibility). I have tried a trial version of the BlueSoleil Bluetooth stack and it solved the wake-up problem. However the BlueSoleil stack causes some other problems, is relatively expensive and I would prefer not to use it. My question: are there any other alternative bluetooth stacks availible for Windows 7 64bit? To my knowledge there used to be Toshiba Bluetooth stack for non-Toshiba hardware, but the older versions I have found on the internet do not install, they do not seem to recognize the bluetooth hardware when installing the driver.

    Read the article

  • Installed Bunch of New Fonts on Windows 7 - Now None Show Up and System Lags

    - by Josh Stodola
    So I went to install about 5,000 fonts on my Windows 7 64-bit machine. It was slow to install them, and I had to leave. I came back and my PC was shut down, and I had to go through the Windows recovery BS when I powered it on. Now my computer runs EXTREMELY slow and any program that has a font menu locks up my whole machine (nothing in Microsoft Office works). When I go to "Fonts" in the control panel, it says 0 items. I went through all of the font settings trying to get them to appear. Nothing helps. I tried to bring up the Character Map and that froze up my machine too. How can I fix this? If I do not get this issue resolved soon, I am wiping this drive and going back to XP (and probably never purchasing another version of Windows again). I never had any issues with XP and have had nothing but performance problems when switching to Windows 7. My quad-core intel extreme with 8GB of RAM should never flinch with the kind of work that I do, and something simple like playing a song off an external HD takes up to five seconds on Windows 7. Unbelievable that I had to pay for this crap!

    Read the article

  • How I can fix the "Display Driver has stopped responding and has recovered"?

    - by Vitor Rangel
    I'm using a GeForce GTX 580, with Windows 7 64-bit. The driver version of the GTX is 301.42. The problem happens after a few minutes, when I'm playing specifc games. It won't happen in all games - And I don't have any idea why these games doesn't work. The games that doesn't work: Battlefield 3, Civilization V, Sniper Elite V2. The games that work: Mass Effect 3, Crysis 2, Team Fortress 2, Left 4 Dead 2, Skyrim, L.A. Noire. As you can see, it's not a problem of "The games that demand more stop working". I've tryed updating the driver of the graphics-card, the bios of the motherboard, even formated my computer (It was needing it) and instaled every driver in the last version possible. This problem happens since I bought my graphics-card, 6 months ago. After a few minutes, from 10 to 20, the pixels in the monitor become strange, with random colors and effects, like it was broken. Then, everything goes black, and the message appears "Display Driver has stopped responding and has recovered". After that, I need to close the game and start again. I am not overclocking, and my temperature never goes higher than 70ºC.

    Read the article

  • Windows 7 System File Checker (sfc) not working

    - by Andrew
    I have a strange problem with Windows 7 RTM. I'm running Ultimate 64-bit edition. Whenever I run sfc /scannow I get this error: Windows Resource Protection could not start the repair service. My research so far has told me that I need to set the Windows Module Installer and Windows Installer services' startup types to Manual. They already were, so I manually started those services and tried again. No luck. I've even booted into my Windows 7 repair disc and tried running sfc /scannow from that. All I get is this: A repair operation is already pending. Restart and try again. History: I'm trying to run sfc because I am unable to open any images in Windows Photo Viewer. Whenever I try, I get the error "Class not registered." I believe the problem started after I installed Gladinet, but I can't be sure. I've uninstalled Gladinet, but the problem remains. System Restore was disabled (yes, I know I'm stupid - you don't have to remind me). Please help. Thanks.

    Read the article

  • Does using a hexacore CPU make sense?

    - by Exa
    I'm currently planning to upgrade my computer system and I want to exchange CPU, board and RAM. I already had a look at some hexacore-CPUs from AMD and would like to know if it makes any sense to use such a CPU with six cores. Is there any software which really uses six cores? Especially in gaming? I'm using this PC mostly for gaming and from time to time for developing. I know that on the dual-core system (2 x 3GHz) I currently use, Visual Studio creates two instances of the compiler, one for each core. Would there be six instances of the compiler on a hexacore system for super fast compiling? Is there any software that uses six cores? Would running two applications cause the usage of more CPUs? (For example two CPUs for a game you're playing while two other CPUs are used for compiling at the same time) I hope someone can point out the benefits of a hexacore system. The OS would be Windows 7 64 Bit and I use the PC for gaming most of the time. (Crysis 2, CoD, stuff like that)

    Read the article

  • Windows 7 hangs with 100% disk activity but only when online

    - by jeremy
    I have the same problem as seemingly many other people here, and I think we might all be experiencing the same issue: a compatibility issue in Windows 7 between hard drive and network controller or drivers. I've tried firmware updates of my entire board, wiping my drive and reinstalling from scratch. And yet the problem persists, which suggests it is an operating system error, as the hard drive checks out 100% physically. Additionally, the only time it does not occur is when in safe mode WITHOUT networking. With networking, there are spikes in disc access every so often and a huge flow of processes accessing the disc simultaneously that literally "stick" the disc, and physically jolting my computer unsticks it. Again, this has been tested for hours in a professional service environment, and without network access on, things are fine. As soon as there's network access available, the disc access occasionally cranks up to 100% and sticks everything. I'm using Microsoft Security Essentials, but this also happened under Norton, then McAfee. Again, this happened again after a complete wipe, so the likelihood of malware causing it seems low. I don't visit unsecure sites anyway, as far as I know. This, to me, narrows it down to a Windows 7 process that is somehow repeatedly corrupted, perhaps a corrupt .dll or driver, causing a conflict at the operating system level and temporary hard drive failure. I would encourage anyone who knows more about this stuff (which is probably most people!) to take a shot at this one, and I would encourage anyone else with a sticking hard drive in windows 7 64-bit to check on whether it occurs during safe mode without networking.

    Read the article

  • Installing ionCube on Windows 2008 64bit

    - by JoJo
    I've been trying to install ionCube onto my server but have not been having a lot of luck! My server is: Windows 2008 64bit PHP 5.3.14 Thread Safe disabled running as FastCGI In my PHP.ini I have : zend_extension="C:\Program Files (x86)\PHP\ext\ioncube_loader_win_5.2.dll" The path is correct. The DLL is from the x86 NONTS VC9 version of ionCube and PHP is using the MSVC9 (Visual C++ 2008) compiler though I have also tried using the x86 NONTS VC6 version of ionCube. I'm not getting any error but I'm also not getting ionCube when using phpinfo(): This program makes use of the Zend Scripting Language Engine: Zend Engine v2.3.0, Copyright (c) 1998-2012 Zend Technologies Apart from the mail application pools I have also set all the applications in the application pool in IIS7 to use 32bit mode. I don't know if FastCGI is running under 64 or 32 bit mode nor how to switch it or whether it would make a difference? I know it can be a problem installing ionCube onto 64bit Windows but I have also come across threads whereby other people have also [somehow] managed to get it working but even though I seem to be doing the same as them I still can't get it working.

    Read the article

  • why would resetting the Netgear N300 router fix my Win 7 laptop's slow wifi?

    - by rjnagle
    In the past day the wifi download speeds of my Win 7 HP 64 bit laptop have slowed considerably. I am trying to troubleshoot the problem and to figure out whether it's hardware related (i.e., is the Intel(R) Centrino(R) Wireless-N 2230 the problem?) or router related. I have a Netgear N300 router connected to my modem. I'm using Speedtest to measure my speed. First, during my problem state, my ipad can download and upload at normal speeds. It's only my Win 7 laptop which is having problems. Because my ipad downloads at normal speeds, that would tell me that the problem is specific to the laptop (either HW or SW). But when I restarted my Netgear router, the laptop wifi problems disappeared. That just doesn't make sense. If we know that one device can connect properly to the router, why would a laptop have problems? What are some possible reasons why this might happen? Also, during my problem state, I noticed that on my laptop upload speeds were faster than my download speeds. Anybody have a guess about what might cause upload speeds on one device to be faster than another? Is there any actions i could take (or options to enable) so this problem won't occur. (I initially thought my problem might be software related or memory related -- Norton AV or browser plugins. But even after I disabled everything and made sure memory footprint was minimal, the slowdown was still occurring -- and it solved itself altogether when the router was reset).

    Read the article

  • How can I get write permission for the Web (Inetpub) directory on a new Win 7 machine?

    - by marcipollo
    I mirror my Web site on my laptop, and am trying to move the mirror site to a new laptop. I copied the files to the Inetpub directory, and can view them perfectly, but they are read-only (the check-mark is grey, not black), and I cannot change the permission. When I un-check the read-only attribute on the Inetpub directory, and click "apply" it displays a dialog box stating that I need administrative permission to change the attributes. (I am logged in as an administrator). When I click "continue," it pops up another dialog box saying access is denied to the attributes of the file: c:\inetpub\custerr\en-us\500-100.asp That dialog box has an "ignore" button, and if I click that, it appears to work through the directory tree setting the permissions. It leaves all of the files (leafs) set to "read-write," but the directories remain "read only." I am using 64-bit Windows 7. I stopped the IIS service while doing all of this. Might it have something to do with the fact that I copied the files from a different machine in the workgroup (my old laptop)?

    Read the article

  • Installed Memory (RAM): 8GB (4GB Useable)

    - by Mike Bannister
    I have 4X 2GB RAM sticks installed, Windows 7 Ultimate x64 shows "Installed Memory (RAM): 8GB (4GB Useable)" in the system information. The motherboard says it supports up to 16GB of memory. I had Windows XP x64 and I'm pretty sure it was able to use all 8Gigs of memory. I've just formatted and am not burning through 4GB for sure. *The BIOS only show 4096MB while booting. I was only able to find one option relating to memory mapping and it took it from 4Gigs to 3 and change. CPU-Z shows all 4 sticks as 2048MB I went in to msconfig and checked the limits, they are not set. I tried resetting the CPU and RAM sticks 3 times, the CPU has no pins to be bent (flat contacts, I5) I rearranged all the RAM. I have separate video memory from the system memory. I have a 64 bit OS (I am 100% certain) Hardware: Memory: Four Corsair XMS3 TW3X4G1333C9AG Motherboard: Asus P7P55D Pro CPU: Intel Core i5-760 BX80605I5760 Graphics: Two ZOTAC ZT-50401-10L GeForce GTX 550 Ti If anyone has new ideas or knows the exact setting in the bios, it would be greatly appreciated.

    Read the article

  • VMworkstation Windows 7 vm from physical partition?

    - by rich
    Hi All, i have a machine with 2 disks. my secondary drive has two partitions, one of which is a windows 7 64 boot partition. I have VM workstation and i would like to make a VM from the physical partition (described above). Ideally this would boot from the live disk, but if i can make a vmdk from the two partitions on the secondary drive that would be fine. 1 issue is the drive is 140gig raptor of which the two partitions i want are 40g and 30g partitions. the rest of the space is unallocated. So if i make a vmdk i really need it to be fixed at say 80 gig. I have converter but i don't understand how i can make the vmdk using this... specs Drive 1: this drive is a 120 SSD, running the host OS (Windows 7 64bit) - i've got 95 gigs free on this Drive 2: 140 gig raptor, partition 1 40g is also a windows 7 64bit install, partition 2 is 35 gig with program files folder on it.. sorta of needed to get the vm to work. There is 65gig unallocated on this disk. Drive 1 will host drive 2 as a VM.. my hope.

    Read the article

  • IE8 CSS and html vs IE7

    - by 08Hawkeye
    Pardon any brashness here, I'm about at my wits end looking for answers. I am looking for a list (if one exists) or some resource guide of specific html and css tags that have changed from IE7 to IE8. Specifically, I want to see something like "this code works in IE7 but not IE8... here is the broken tag's equivalent to make IE8 work." I do NOT [begin frustration rant] want to hear anything about the meta x-ua-compatibility work around to put in my header. We are FIXING our app for IE8, not putting on a band-aid. Thanks in advance! //sw

    Read the article

  • ie8 breaks with asp.net ajax

    - by Amadeo Torese
    Hello, When using asp.net ajax (scriptmanager, timer, updatepanel) with ie8, after certain time (~3h) IE breaks with null object, constructor, or paramArray (depending on the asp.net code). Even with the simplest timer (no ajax, no updatepanel) ie8 still breaks. On every other browser it works fine, and if I code the ajax myself it works. Since google and msdn forums turned up nothing I'm wondering if anybody here has had similar problems with ie8 browser.

    Read the article

  • Using the IE8 'Developer Tools' to debug earlier IE versions

    - by mieze
    Hi guys and gals I am less than satisfied in my HTML/CSS/JS debugging of pages with IE6 and 7 specific bugs. I am aware that IE8 has a Firebug clone, called 'Developer Tools' installed. Is it possible to have IE8 installed (maybe on a VM, i don't mind), set it to compatibility mode (is there one for IE6?), then perform JS debugging and live HTML changes, using the IE8 Developer Tools, just like we can in Firebug? many many thanks mieze

    Read the article

  • IE8 developer tools missing some styles

    - by Craig Warren
    Hi, I'm having some problems with some CSS properties in IE8. I've tested my site in IE7, Chrome and Firefox and they work fine but IE8 is having some layout issues. I inspect the developer tool option on ie8 and I've noticed that some of the properties I set in CSS are being ignored by ie8. For example: #header { position: relative; padding: 20px; height: 100px; background:url(header.png); } In this header IE8 ignored the height property: If I inspect the element in developer tools it is missing that property and it's crushed into another line: background:url;HEIGHT: 100PX The same thing happens for floats too: #logon { float: left; text-align:right; width:20%; height: 40px; padding-left: 0px; padding-right:7px; border:0; margin:0; background: url(navgradient.gif); } This ignores the float value: background: url(navgradient.gif); FLOAT:left; What is happening here and how can I fix it?

    Read the article

  • IE8 Accordion menu is throwing out some weird bugs

    - by Qwibble
    I have an accordion side menu in my latest project that works in all modern browsers properly, apart from ie8. In Ie8, using the menu and clicking results in random padding and margins to be added and sometimes disappear for no apparent reason. I can't find any bit of jquery code that would potentially cause this to happen which is a pain. Even more confusing is the fact that this doesn't happen in Ie7 =S Can anyone here replicate this bug, and see what the problem is? Project Demo to view in ie8

    Read the article

  • IE8 Windows 7 (64bit) security certificate problem

    - by Steve
    Hi, We have just received some new computers for use in the office (Dell Vostro). They seem to work fine in the main. When we use IE8 to go to some web pages such as yahoo mail it tells us: “There is a problem with this websites security certificate” If we have a look at the details it says: “This certificate cannot be verified up to a trusted certification authority” This however works correctly in Firefox. I don't understand why I should get such an error message, should this not just work? I don't think its anything to do with the certificate itself as this is happening on www.yahoo.co.uk and other commercial (amazon I think?) sites. I think there is something off with the PCs setup. The PC has Windows 7 (64 bit) and Norton Internet Security installed. Any ideas as to why this is happening? Thanks

    Read the article

  • 503 Error After Microsoft Request Routing Is Installed - 32 bit 64 bit madness

    - by KenB
    I have a requirement to install the Microsoft Request Routing component for IIS 7.5 running on a Windows 2008 R2 SP1 64Bit machine. After installing Microsoft Request Routing via the Web Platform installer our ASP.NET 4.0 application gets a "HTTP Error 503. The service is unavailable." The Windows event log error details says: The Module DLL 'C:\Program Files\IIS\Application Request Routing\requestRouter.dll' could not be loaded due to a configuration problem. The current configuration only supports loading images built for a AMD64 processor architecture. The data field contains the error number. To learn more about this issue, including how to troubleshooting this kind of processor architecture mismatch error, see http://go.microsoft.com/fwlink/?LinkId=29349. I can make this error go away by changing the application pool to run in 32 bit mode by changing the "Enable 32-Bit Applications" setting to true. However I would prefer not to have to do that to resolve the issue. My questions are: Why is the Microsoft Request Routing feature trying to load a 32 bit version, isn't there a 64 bit version for it? How do I resolve this issue without having to change my application pool to a 32 bit mode?

    Read the article

  • Vmware Player 3.0 - cannot ping 32 bits guest from 64 bits (guest or host)

    - by npmj
    I'm stuck with what seems a bug in VmWare Player (build 203739). I'm using W7 Ultimate 64bits as host and have a CentOS 5.4 (64 bits) as a guest and a Windows XP Professional SP3 (32 bits) as another guest. From the 64 bits machines (the host and the linux guest) I cannot ping the windows XP. Off course, I already turned off the windows firewall in the guest and also in the host. The network is pretty basic, I'm using Vmnet8 (NAT), with DHCP and port forwarding (to the windows XP's IP). Everything is working ok, I have internet access from host and from both guests. Port forwarding to the XP guest is working ok too. The only problem is that I cannot access the XP guest through the Vmnet8. I monitored the traffic using wireshark (in the host and in the windows guest). If I try to ping the XP guest from the host, what I see is the ARP request leaving the host, being answered by the guest and, after that, there is no echo request leaving the host. The same occurs if I try to ping the XP from the CentOs guest. From the windows XP guest I can ping both the host and the CentOs guest. From the XP guest I can access the host shares. Obviously, from the host I cannot see the XP shares (as I cannot even ping the guest). I want to maintain this setup (using NAT to share the host's internet connection). Any suggestions?

    Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >