Search Results

Search found 11425 results on 457 pages for 'ip messenger'.

Page 32/457 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39 | Next Page >

Question about Remote WAN IP on NetGear FVS336G VPN setup

- by camilian

I wanted to be able to have a VPN connection to my home network so I purchased the FVS336G because the reviews said it was easy set up. I am sure it is for someone that knows what needs to be entered it is easy, but I am a little confused. Using the VPN wizard I choose VPN Client as the tunnel connection, enter key, etc... but then I get to the "What is the remote WAN's IP or Internet Name" and "What is the local WAN's IP address or Internet Name" I am lost. I am probably being really dumb, but I am not sure what I need to put in here. Is the remote WAN ip the ip from the outside world to my cable modem? Is the local ip the ip to my FVS336G? Any help would be appreciated.

Read the article
Forwarding udp ports iptables packets "lost"?

- by Dindihi

I have a Linux router (Debian 6.x) where i forward some ports to internal services. Some tcp ports (like 80, 22...) are OK. I have one Application listening on port 54277udp. No return is coming from this app, i only get Data on this port. Router: cat /proc/sys/net/ipv4/conf/all/rp_filter = 1 cat /proc/sys/net/ipv4/conf/eth0/forwarding = 1 cat /proc/sys/net/ipv4/conf/ppp0/forwarding = 1 $IPTABLES -t nat -I PREROUTING -p udp -i ppp0 --dport 54277 -j DNAT --to-destination $SRV_IP:54277 $IPTABLES -I FORWARD -p udp -d $SRV_IP --dport 54277 -j ACCEPT Also MASQUERADING internal traffic to ppp0(internet) is active & working. Default Policy INPUT&OUTPUT&FORWARD is DROP What is strange, when i do: tcpdump -p -vvvv -i ppp0 port 54277 I get a lot of traffic: 18:35:43.646133 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.652301 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.653324 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.655795 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.656727 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.659719 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 tcpdump -p -i eth0 port 54277 (on the same machine, the router) i get much less traffic. also on the destination $SRV_IP there are only a few packets coming in, but not all. INTERNAL SERVER: 19:15:30.039663 IP source.ip.52394 > 192.168.215.4.54277: UDP, length 16 19:15:30.276112 IP source.ip.52394 > 192.168.215.4.54277: UDP, length 16 19:15:30.726048 IP source.ip.52394 > 192.168.215.4.54277: UDP, length 16 So some udp ports are "ignored/dropped" ? Any idea what could be wrong? Edit: This is strange: The Forward rule has data packets, but the PREROUTING rule has 0 packets... iptables -nvL -t filter |grep 54277 Chain FORWARD (policy DROP 0 packets, 0 bytes) 168 8401 ACCEPT udp -- * * 0.0.0.0/0 192.168.215.4 state NEW,RELATED,ESTABLISHED udp dpt:54277 iptables -nvL -t nat |grep 54277 Chain PREROUTING (policy ACCEPT 405 packets, 24360 bytes) 0 0 DNAT udp -- ppp0 * 0.0.0.0/0 my.external.ip udp dpt:54277 state NEW,RELATED,ESTABLISHED to:192.168.215.4

Read the article
Windows CE: Changing Static IP Address

- by Bruce Eitman

A customer contacted me recently and asked me how to change a static IP address at runtime. Of course this is not something that I know how to do, but with a little bit of research I figure out how to do it. It turns out that the challenge is to request that the adapter update itself with the new IP Address. Otherwise, the change in IP address is a matter of changing the address in the registry for the adapter. The registry entry is something like: [HKEY_LOCAL_MACHINE\Comm\LAN90001\Parms\TcpIp] "EnableDHCP"=dword:0 "IpAddress"="192.168.0.100" "DefaultGateway"="192.168.0.1" "Subnetmask"="255.255.255.0" Where LAN90001 would be replace with your adapter name. I have written quite a few articles about how to modify the registry, including a registry editor that you could use. Requesting that the adapter update itself is a matter of getting a handle to the NDIS driver, and then asking it to refresh the adapter. The code is: #include <windows.h> #include "winioctl.h" #include "ntddndis.h" void RebindAdapter( TCHAR *adaptername ) { HANDLE hNdis; BOOL fResult = FALSE; int count; // Make this function easier to use - hide the need to have two null characters. int length = wcslen(adaptername); int AdapterSize = (length + 2) * sizeof( TCHAR ); TCHAR *Adapter = malloc(AdapterSize); wcscpy( Adapter, adaptername ); Adapter[ length ] = '\0'; Adapter[ length +1 ] = '\0'; hNdis = CreateFile(DD_NDIS_DEVICE_NAME, GENERIC_READ | GENERIC_WRITE, FILE_SHARE_READ | FILE_SHARE_WRITE, NULL, OPEN_ALWAYS, 0, NULL); if (INVALID_HANDLE_VALUE != hNdis) { fResult = DeviceIoControl(hNdis, IOCTL_NDIS_REBIND_ADAPTER, Adapter, AdapterSize, NULL, 0, &count, NULL); if( !fResult ) { RETAILMSG( 1, (TEXT("DeviceIoControl failed %d\n"), GetLastError() )); } CloseHandle(hNdis); } else { RETAILMSG( 1, (TEXT("Failed to open NDIS Handle\n"))); } } int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int nCmdShow) { RebindAdapter( TEXT("LAN90001") ); return 0; } If you don’t want to write any code, but instead plan to use a registry editor to change the IP Address, then there is a command line utility to do the same thing. NDISConfig.exe can be used: Ndisconfig adapter rebind LAN90001 Copyright © 2012 – Bruce Eitman All Rights Reserved

Read the article
make vnc server listen on guest's ip address

- by gucki

My host system has the IP 192.168.0.250. Now I want to create a kvm guest using a tap device (so the network card of the guest just acts like a "real" one). The guest has a static ip 192.168.0.249 which it setups on his own (no dhcp). To connect to the guest using VNC I can to use the host's IP. So far everything works fine. Now I wonder how I can make the VNC server to listen on the guest's IP address, so I can use the guest's IP address to connect using my vnc client. Of course I cannot use -vnc 192.168.0.249:1 as this IP is not active on the host and so fails with Cannot assign requested address. Can this be done with tap networking at all? If not, how to get it working?

Read the article
Big mail issue two ip address

- by Luka

I have two ip addresses on my server, First IP is assigned to my clients, second is assigned to me. Issue started today. My clients can not send mail via php from their ip address (shared ip address which are all of them using). Server is refusing it with error ERROR: Password not accepted from server: 535 Incorrect authentication data But via their desktop mail clients it can send mail, when they use my ip address for hostname (second ip of server assigned to me) they can send mail. help.

Read the article
Replies to request coming over a relay goes to relay's internal IP, not to original request's source IP

- by seaquest

Dhcpd running on Linux gets a dhcp request over dhcrelay which is running on other remote machine. Oct 6 10:09:46 2012 dhcpd: DHCPDISCOVER from 00:1e:68:06:eb:37 (oguz-U300) via 172.16.17.81 tcpdump: listening on eth1, link-type EN10MB (Ethernet), capture size 96 bytes 10:35:01.112500 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto: UDP (17), length: 328) 192.168.0.81.67 > 192.168.0.1.67: BOOTP/DHCP, Request from 00:1e:68:06:eb:37, length: 300, hops:1, xid:0xe378fc7e, flags: [none] (0x0000) Gateway IP: 172.16.17.81 Client Ethernet Address: 00:1e:68:06:eb:37 [|bootp] It matches to a subnet and send reply. However reply does not go to the requesting dhcrelay external IP(192.168.0.81). Instead, it goes to the internal interface IP of machine running dhcrelay. And I think because of this remote machine running dhcrelay or the dhcrealy itself discarding packet. Oct 6 10:09:46 2012 dhcpd: DHCPOFFER on 172.16.17.11 to 00:1e:68:06:eb:37 (oguz-U300) via 172.16.17.81 10:35:02.050108 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto: UDP (17), length: 328) 192.168.0.1.67 > 172.16.17.81.67: BOOTP/DHCP, Reply, length: 300, hops:1, xid:0xe378fc7e, flags: [none] (0x0000) Your IP: 172.16.17.11 Gateway IP: 172.16.17.81 Client Ethernet Address: 00:1e:68:06:eb:37 [|bootp] Is this a normal behaviour? Machine running dhcrelay: eth1(ext) Link encap:Ethernet HWaddr 00:90:0B:21:43:F4 inet addr:192.168.0.81 Bcast:192.168.0.255 Mask:255.255.255.0 eth2(int) Link encap:Ethernet HWaddr 00:90:0B:21:43:F5 inet addr:172.16.17.81 Bcast:172.16.17.255 Mask:255.255.255.0 3582 ? Ss 0:00 /usr/sbin/dhcrelay -i eth2 192.168.0.1 Machine running dhcpd: eth1 Link encap:Ethernet HWaddr 00:90:0B:23:97:D1 inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 option domain-name "test.com"; option subnet-mask 255.255.255.0; authoritative; ignore client-updates; ddns-update-style ad-hoc; default-lease-time 86400; max-lease-time 86400; subnet 192.168.0.0 netmask 255.255.255.0 { range 192.168.0.135 192.168.0.169; option broadcast-address 192.168.0.255; option domain-name-servers 192.168.0.1; option domain-name "test.com"; option routers 192.168.0.1; } subnet 172.16.17.0 netmask 255.255.255.0 { local-address 192.168.0.1; server-identifier 192.168.0.1; range 172.16.17.10 172.16.17.11; option broadcast-address 172.16.17.255; option routers 172.16.17.81; } (I put local-address and server-identifier. But this does not help ) Regards, -- Oguz YILMAZ UPDATE: The first problem is found. I have configured dhcrelay only on listening internel interface. It seems (of course) is should also listen to external interface for replies. It appears it is not important where the packet destined to. dhrelay will forward it to internal net. HOWEVER, I have deleted route on dhcpd server to reach 172.16.17.x subnet. It again tries to send reply to 172.16.17.81. Because it does not know the route it send it from default gateway to the internet. eth0: IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto: UDP (17), length: 328) 192.168.1.2.67 > 172.16.17.81.67: BOOTP/DHCP, Reply, length: 300, hops:1, xid:0x32830125, secs:3, flags: [none] (0x0000) eth0: Your IP: 172.16.17.11 eth0: Gateway IP: 172.16.17.81 eth0: Client Ethernet Address: 00:1e:68:06:eb:37 [|bootp] How can I force dhcpd to force to send replies to requesting IP? Because, it is not much meaningful to add routes to subnet we distribute IP for. Internet - dhcpd - 192.168.0.1 - SOMENET - 192.168.0.81 - dhcrelay - 172.16.17.0/24 192.168.0.1 has no route for 172.16.17.0 and has no interface directly attached to that net.

Read the article
SEO best practices for a web feature that uses geolocation by IP Address

- by Nick

I'm working on a feature that tailors content based on a geo location lookup by IP address in order to provide information based on the general area where this visitor is from. I'm concerned that content will be interpreted as focused solely on the search engine spider's geo origin when it is indexed. Are there SEO best practices for geo location by ip address features? I appreciate any specific tips or words of wisdom.

Read the article
Lost contact with my NAS after changing its IP

- by Beles

I did some brain-dead reconfiguring of my D-Link DNS-323 NAS some days ago. I have a home network where each computer gets a dynamically allocated IP address starting at 192.168.1.100. The irritating point (for me at least) was that the NAS changed IP if the power went down or I turned off the router. I then had to remap a drive-letter to point to the new IP address of the NAS. To remedy that I configured the NAS to have a static IP, 192.168.0.10. I had no good reason to choose that IP, other than I found it in a user manual for the NAS. After I changed the IP and rebooted the NAS it disappeared from the network and was never to be found again. Now I have a black brick standing in my home, looking good, but "dead". Could anyone point me in a direction which helps me solve this problem? I have about 100gb worth of pic of my children on this brick so I really want it back :-) Sincerely,

Read the article
Adding a second IP address for IIS - static vs dynamic A records

- by serialhobbyist

I'm looking to add a second IP address to IIS so that I can run two sites with different SSL certificates. When I added one on my play box and ran ipconfig /registerdns both addresses were registered in DNS with the server's name. So, I deleted the A record for the new IP address and rebooted. That also registered both names. So, then I went into the network config for the adapter and, on the DNS tab, unchecked "Register this connection's addresses in DNS". I deleted the A record for the new IP address again and re-ran ipconfig /registerdns. This time, it deleted the A record for the old IP address and didn't created one for the new address. Neither of these is what I want: I want the main IP address to be registered and refreshed automatically as a dynamic DNS record and the second IP address to be registered and managed as a static address. Is there any way to achieve this?

Read the article
how to restrict wampserver access to certain ip addresses

- by user28233

What do I need to do in order to restrict the access to my wamp server to certain ip addresses. Just imagine that the my ip address is the ip address that I only want to have access I tried to edit the .htaccess # This folder does not require access over HTTP # (the following directive denies access by default) Order allow,deny Allow from 112.203.229.44 and the phpmyadmin.conf: Alias /phpmyadmin "E:/wamp/apps/phpmyadmin3.2.0.1/" # to give access to phpmyadmin from outside # replace the lines # # Order Deny,Allow # Deny from all # Allow from my ip address # # by # # Order Allow,Deny # Allow from my ip address # <Directory "E:/wamp/apps/phpmyadmin3.2.0.1/"> Options Indexes FollowSymLinks MultiViews AllowOverride all Order Deny,Allow Deny from all Allow from my ip address </Directory>

Read the article
Why my dns server ip got blacklisted instead of my email server ip?

- by Khurram Masood

We are hosting our own dns server our scenario is as under; dns ip: a.b.c.1 fqdn:ns1.example.com ------ reverse lookup to a.b.c.1 mail server ip a.b.c.2 mail.example.com ------ reverse lookup to a.b.c.2 smtp.example.com ------ no reverse lookup pop.example.com ------ no reverse lookup web server ip a.b.c.3 example.com ------ reverse lookup to a.b.c.3 www.example.com ------ no reverse lookup a few days back our dns server ip got blacklisted and all our services were down from outside. We had also added a new dns server on a separate network that caused our domain and machines with same names as above to resolve on different ips, can this b a cause of being blacklisted? But all blacklists points towards spamming. Can anyone please explain why my dns ip got blacklisted instead of my email or web server ip?

Read the article
Google Analytics: Block Your Dynamic IP Visits?

- by 4thSpace

I have a dynamic IP, which doesn't work for Google Analytics IP filtering. I read this post How to excludes my visits from Google Analytics? but don't see any code for setting the variable mentioned there. Has anyone been able to block their website visits from Google Analytics using a cookie? EDIT: This seems to work https://tools.google.com/dlpage/gaoptout. Although I don't think it was designed as I'm using it.

Read the article
Blocking IP's Nginx behind proxy

- by FunkyChicken

I'm running a Nginx 1.2.4 webserver here, and I'm behind a proxy of my hoster to prevent ddos attacks. The downside of being behind this proxy is that I need to get the REAL IP information from an extra header. In PHP it works great by doing $_SERVER[HTTP_X_REAL_IP] for example. Now before I was behind this proxy of my hoster I had a very effective way of blocking certain IP's by doing this: include /etc/nginx/block.conf and to allow/deny IP's there. But now due to the proxy, Nginx sees all traffic coming from 1 IP. Is there a way I can get Nginx to read the IP's like how PHP does, with the X-REAL-IP header?

Read the article
NETSH : Set default ip address for an interface with multiple Ips

- by elarichi.y

To test a load balancer I need to switch my ip address several time a day, and keep other ips routing trough other Wans. I run these commands in a batch script: netsh interface ip set address "Connexion au réseau local" static %ipd% 255.255.255.0 192.168.1.1 1 netsh in ip add address "Connexion au réseau local" %ips1% 255.255.255.0 netsh in ip add address "Connexion au réseau local" %ips2% 255.255.255.0 ipd: is the default ip I want to set (all traffic should go trough it). ips1 and ips2 : are the secondary ips I want to keep but what ever I do all traffic goes trough one IP !! (first one in the range) Please help me with this issue.

Read the article
solaris + match the network device name according to IP address

- by yael

how to find the device name as ( e1000g2 , e1000g3 , etc ) according to his IP address on Solaris machine for example ifconfig -a | grep 10.106.134.133 inet 10.106.134.133 netmask ffffff00 broadcast 10.106.134.255 ifconfig with grep command view only the line with the IP address , and the device name appears before the IP address so my target is to match the device name according to the IP address on Solaris machine , and then insert the device name in to parameter ( ksh ) please advice? full example: from ifconfig -a ( I get the IP and device name , what I need is to find the device name according to IP address , and insert the device name in to parameter ) e1000g2: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 inet 10.106.134.133 netmask ffffff00 broadcast 10.106.134.255

Read the article
How to combine with openvpn, dynamic-ip?

- by asfasdv

Dear everyone, I am currently using openvpn to surf online to bypass censorship. Let me show you the initial scenario: before openvpn is turned on: IP: 1.2.3.4 (hypothetical, checked by visiting whatismyip.com/) after openvpn is turned on IP: 10.2.3.4 (this is also checked with whatismyip.com/, I assume this is where the vpn's exit point's IP ) Situation: Once I enable openvpn, I can still ssh into this computer by sshing into 1.2.3.4, even though visiting whatismyip.com/ says it's 10.2.3.4. However, I am on dynamic IP, I run a website, and am using tools (inadyn in particular) which pings the freedns.afraid.org (my dns server) and updates my ip. The messed up part is when inadyn does so, my dns changes the ip to 10.2.3.4, which is presumably the exit point of my vpn. How do I get around this? (Note that sshing into 1.2.3.4 STILL works).

Read the article
Virtual IP, and Reverse Proxying Ports (Making up terms)

- by macintosh264

So here is the exact situation that I have I have 2 game servers in my house. One on port 25565, and the second on 25567. I have only one IP in my house I need to get a "virtual IP" for the second server. Some way of giving the computer that runs these game servers a second IP (linux) I need the Virtual IP to receive connections on 25565 and forward the data to 25567. Although if linux recognizes the second IP in networking I assume I can bind to the second IP on port 25565

Read the article
How to use a specific Ip to access specific sites by?

- by Dani AM

My Company registered in certain services on the Web and are relying on the company's Ip to use these services, Director asked me to allow some staff to enter these sites from outside the company,after authorized staff enter to comany's site, How could they use the company's Ip to allow them to browse services sites ? Do I need to use a method such as proxy sites like youtube proxy? or there is another way?How do I do this in asp.net? thanks in advance.

Read the article
How to use a specific IP to access specific sites by?

- by Dani AM

My Company registered in certain services on the Web and are relying on the company's IP to use these services, Director asked me to allow some staff to enter these sites from outside the company, after authorized staff enter to comany's site. How could they use the company's IP to allow them to browse services sites? Do I need to use a method such as proxy sites like youtube proxy? or there is another way?How do I do this in asp.net? Thanks in advance.

Read the article
Python - create blacklist file of IP addresses that have more than 5 failed login attempts in the au

- by oz_babe

Basically I have an authlog/syslog file with a list of log in attempts and IP addresses - I need to make a Python program that will create a txt file with all the IP addresses that have more than 5 failed login attempts - a sort of "blacklist". So basically something like: if "uniqueipaddress" and "authentication failure" appear more than 5 times, add uniqueipaddress to txt file. Any help would be greatly appreciated - please try and make it simple as I am very, very inexperienced in programming in Python! Thanks.

Read the article
Should the website switch language based on IP address or browser language?

- by SuperRomia

Geo-location has been used most by Websites to do redirection, but I have found that several IP addresses locate a country which has using several languages. Meantime, some users prefer to using the language setup in their system. For example, a person from United States goes to Japan and using the Internet connection from there to surf Website, but the Website redirects him to Japanese language. So, should I give the web user a choice to select the language detected on their browser or force them to the website detected by IP address?

Read the article
Shall the website switches language based on IP address or browser language?

- by SuperRomia

Geo-location has been using most by Websites to redirection, but I have found that several IP addresses locate a country which has using several languages. Meantime, some users prefer to using the language setup in their system. For example, a person from United States goes to Japan and using the Internet connection from there to surf Website, but the Website redirects him to Japanese language. So, shall I giving the web user choice to select the language detect on their browser or force them to the website detected by IP address?

Read the article
In Ruby, how does one get their IP octet without going through DNS?

- by user30997

I can, on some of my systems, get my IP address (192.68.m.n format) by doing this: addr = IPSocket::getAddress(Socket.gethostname()) ...the trouble is that this only works if the name the local machine uses for itself is the name the DNS server associates with it. How *&#( hard can it be for ruby to just return its primary interface's IP address? I have to do this in a platform-independant way or I'd just call ifconfig or ipconfig and parse it.

Read the article
How to find out my server's IP address through it's domain name from my flex air application?

- by Naveen kumar

Hi all, I'm working on file transfer application where client sends files to cpp server. At client side I can give the server's domain name but not IP address cuz it may vary. So any one can tell me how can I get my server's IP address through it's domain name. I have to put this logic into air application. Thank you.

Read the article
Validating IPv4 string in Java

- by Mat Banik

Bellow method is validating if string is correct IPv4 address it returns true if it is valid. Any improvements in regex and elegance would be very appreciated: public static boolean validIP(String ip) { if (ip == null || ip.isEmpty()) return false; ip = ip.trim(); if ((ip.length() < 8) & (ip.length() > 15)) return false; try { Pattern pattern = Pattern.compile("^(?:(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\\.){3}(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)$"); Matcher matcher = pattern.matcher(ip); return matcher.matches(); } catch (PatternSyntaxException ex) { return false; } }

Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39 | Next Page >