Search Results

Search found 1630 results on 66 pages for 'kevin van zanten'.

Page 32/66 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

• How do you use Time Capsule for MAC controlled Internet?

  - by Kevin Perttula

  I'm using an Internet Provider that requires a username and password to log in; the prompt shows up as soon as you open a web browser. Because of this, I can only have one device online at a time. How can I get my Time Capsule to essentially log in as the user and allow other devices to connect through it. My Time Capsule has worked with other ISPs that don't require the user log in, but I recently moved. I may be wrong about how the ISP is allowing access, I wasn't sure how to describe the problem. Thanks.

  Read the article

• How can I change the amount and size of Linux ramdisks (/dev/ram0 - /dev/ram15)?

  - by Kevin S.

  Using Linux, when I boot I automatically have 16 16MB ramdisks, however, I would like to create one really large ramdisk to test some software. I found that I can adjust the size of the ramdisks already on the system with the kernel boot parameter ramdisk_size however, this makes all 16 ramdisks (/dev/ram0 - /dev/ram15) the size that is specified. So if I want to create a 1GB ramdisk, I would need 16GB of memory. Basically, I want to create one 10GB ramdisk which would be /dev/ram0. How would I go about doing that? I assume there is a kernel boot parameter, but I just haven't found it.

  Read the article

• erratic response times with Apache 2.0.52 on redhat 4.

  - by Kevin

  Under load, we've noticed response times from Apache vary greatly for the same 7k image. It can range anywhere from .01 seconds to 25 seconds or greater. Unfortunately, due to corporate policy constraints we are pretty much stuck on Apache 2.0.52. I'm at best an Apache novice so I'm in over my head with this problem. My focus recently has turned to our choice of MPM modules. We use the worker model on a dual core hyper threaded blade. It doesn't appear that swapping is an issue, and I don't see any signs of a hardware problem. I've read that worker is optimal on hardware with many CPU's where prefork it more suitable for our specific hardware profile. I can see conceptually how choosing the wrong MPM could result in this erratic behavior, but I'm not confident that it's the root cause here. Has anyone else seen this type of range in your response times for simple static content? What else should I be looking into here?

  Read the article

• Ping reply not getting to LAN machines but getting in Linux router Gateway

  - by Kevin Parker

  I have configured Ubuntu 12.04 as Gateway machine.its having two interfaces eth0 with ip 192.168.122.39(Static) and eth1 connected to modem with ip address 192.168.2.3(through DHCP). ip-forwarding is enabled in router box. Client machine is configured as: ip address 192.168.122.5 and gateway 192.168.122.39 Client machines can ping router box(192.168.122.39).but when pinged 8.8.8.8 reply is not reaching Client machines but in the tcpdump output on gateway i can see echo request for 8.8.8.8 but never echo reply.Is this because of 122.5 not forwarding request to 2.0 network.Can u please help me in fixing this.

  Read the article

• So confused by these CPU Specs can someone please help me out? THanks!

  - by Kevin

  Intel® Core™ i7-640M (2.8~3.46GHz, 35W) w/4MB Cache - 2 Cores, 4 Threads - 2.5 GT/s SO i'm buying a new laptop, which i have not done in 6 years. So i am not familiar with any of these cpu specs. It was the highest option for intel for this laptop. So i am assuming it is somewhat fast. But i'd like to learn what these specs mean. Any help would be greatly appreciated. i am not really a computer guy but would love to learn about what I am buying. Thanks!

  Read the article

• Limiting nproc in an upstart job

  - by Kevin Schmid

  What exactly does the stanza limit nproc 20 20 in an Upstart job do? I've read the documentation here (http://upstart.ubuntu.com/wiki/Stanzas#limit), and it seems like it would limit nproc for any process related to the job. However, I don't see this effect when I've added this to my job's conf file - in this specific case, I've confirmed that my test job's single process was able to fork more than 20 child processes. Any advice? Thanks.

  Read the article

• Running multiple lines through a server.

  - by Kevin Roberson

  I am looking to buy numbers in bulk on DIDx.net. After I purchase the numbers in a particular area code, I want to forward those numbers to other numbers that are outside of that area code. This way it will be seen as a local call versus long distance. I have the customers but I don't have the system I need. I have read about Asterisk, VOIP, SIP, and BYOH. But I have no clue what will be the best system for me. Does anyone have any idea what my next step should be when it comes to hardware and software? Or what type of operating system I should use? I basically want to set up a system like GoogleVoice & Phonebooth.

  Read the article

• How to dock a window to an inside edge of a dual-monitor setup

  - by Kevin M

  I have a dual monitor setup at work. I am running Windows 7 Ultimate, and I would like to take advantage of the docking feature, whereby you can drag a window to the side of the monitor and have it expand and fill to half the screen. Trouble is, I would like to drag it to the inside edge(adjoining the other screen) and it does not activate. How would I go about activating this for the inside edge?

  Read the article

• Extension or setting in Firefox to change the Downloads window into a tab?

  - by Kevin L.

  Simple problem: I'd like the Downloads window to appear as a tab in Firefox. I used to use Downloads in Tab 0.0.6 but it doesn't seem to be compatible with Firefox 3.x. Any suggestions?

  Read the article

• Regular Expression for "AND"?

  - by Kevin

  Let's say I gave you the following text: allow_httpd_anon_write --> off allow_httpd_mod_auth_ntlm_winbind --> off allow_httpd_mod_auth_pam --> off allow_httpd_sys_script_anon_write --> off httpd_builtin_scripting --> on httpd_can_check_spam --> off httpd_can_network_connect --> off httpd_can_network_connect_cobbler --> off httpd_can_network_connect_db --> off httpd_can_network_memcache --> off httpd_can_network_relay --> off httpd_can_sendmail --> off httpd_dbus_avahi --> on httpd_enable_cgi --> on httpd_enable_ftp_server --> off httpd_enable_homedirs --> on httpd_execmem --> off httpd_read_user_content --> off httpd_setrlimit --> off httpd_ssi_exec --> off httpd_tmp_exec --> off httpd_tty_comm --> on httpd_unified --> on httpd_use_cifs --> off httpd_use_gpg --> off httpd_use_nfs --> off What I want to do is create a regular expression that can parse text like this looking for two or more words on the same line. For example, if I was looking for a SELinux boolean that covered "ftp" AND "home" on the same line, I would currently do the following: getsebool -a | grep -i ftp | grep -i home However, I am looking for a regular expression that does the same thing. Specifically, find all of the words in any order on a line...

  Read the article

• How do I set up my home server to go directly to a port other than 80

  - by Kevin

  I'm using dyndns, a lynksis wt54g router, and tomcat 7 with spring to set up a web server. This is my first time to attempt this. I'm sure this is a very common question, but I don't know enough to find the answer after quite a bit searching. Dyndns is successfully forwarding to my ip. The main problem is, the router admin login is coming up when my url is used. I'm hosting my site on port 8080. I have port forwarding set up for port 8080 but my request times out when I attempt to use my url like this www.myurl1234.com:8080. I don't want users to have to type the port anyway. I also tried changing the management port to 82 and hosting on port 80, but I still get the router admin login when I use my url. Where am I going wrong? Can I set it up so that www.myurl1234.com goes straight to port 8080?

  Read the article

• Network connection on Linux

  - by Kevin

  A general question about network connection on Linux : once a network connection goes into time_wait, is it still tied to the process ? Does it still use resources like say filehandle ? Reason I ask is because once it goes into time_wait, lsof does not report it anymore. I guess that means that the network connection is no longer tied to the process and hence does not count against filehandle limit. Would like to confirm though.

  Read the article

• Allow SFTP in iptables

  - by Kevin Orriss

  I have just purchased a VPS from linode and am going through the setup guide. I have everything running (apache2, php, mysql etc) but I am being denied access via SFTP when using fileZilla to upload a file. Now this is my second time installing the server as I missed a section out the first time. I was able to connect to my server through SFTP on filezilla the first time and the thing I missed out was adding a new user and editing the iptables in the firewall. So it would seem that the guide I have been following has blocked SFTP but allowed SSH. Here is the iptables file: *filter # Allow all loopback (lo0) traffic and drop all traffic to 127/8 that doesn't use lo0 -A INPUT -i lo -j ACCEPT -A INPUT ! -i lo -d 127.0.0.0/8 -j REJECT # Accept all established inbound connections -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow all outbound traffic - you can modify this to only allow certain traffic -A OUTPUT -j ACCEPT # Allow HTTP and HTTPS connections from anywhere (the normal ports for websites and SSL). -A INPUT -p tcp --dport 80 -j ACCEPT -A INPUT -p tcp --dport 443 -j ACCEPT # Allow SSH connections # # The -dport number should be the same port number you set in sshd_config # -A INPUT -p tcp -m state --state NEW --dport 22 -j ACCEPT # Allow ping -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT # Log iptables denied calls -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 # Reject all other inbound - default deny unless explicitly allowed policy -A INPUT -j REJECT -A FORWARD -j REJECT COMMIT All I would like is a line I need to put in there which allows SFTP over port 22. Thank you for reading this.

  Read the article

• mod_wsgi -apache configuration file

  - by Kevin

  guys sorry I'm a newbie to this but I've been following the mod_wsgi configuration tutorial and it's very spotty. In my httpd.conf file I add the virtual host like so: 'Main' server configuration # The directives in this section set up the values used by the 'main' server, which responds to any requests that aren't handled by a definition. These values also provide defaults for any containers you may define later in the file. # All of these directives may appear inside containers, in which case these default settings will be overridden for the virtual host being defined. # ServerName wsgihost DocumentRoot "/Library/WebServer/Documents" <Directory "/Library/WebServer/Documents"> Order allow,deny Allow from all </Directory> WSGIScriptAlias /myapp /Users/KL/modwsgi/env/myapp.wsgi <Directory "/Users/KL/modwsgi/env"> <Files myapp.wsgi> Order allow,deny Allow from all </Files> </Directory> Now, when I also added in my local host the following: 127.0.1.1 wsgihost but I can't seem to connect. Am I doing something terribly wrong?

  Read the article

• Utility to take daily screenshots of a webpage

  - by Kevin L.

  I would like to have a visual history of my Tomato bandwidth graphs, so that I can roughly/manually correlate them with some other factors. Tomato can squirrel away the actual data points, but I'd rather not deal with importing it into some visualization tool. For sheer simplicity, a single image per day would be preferable. I'd like a program that can wake up at say, midnight, take a screenshot of a given webpage (the URL will always be the same), and save that image to a folder, maybe named after the date/time. I'd prefer OS X, but Windows and Linux are fair game too; I use all three. Any suggestions?

  Read the article

• Apache .shared folder

  - by Kevin

  There are already a bunch of rules in my Apache configuration. What I want to add is the following. There are some shared folders (.shared): /var/www/.shared/ and /var/www/.include/.shared/ and /var/www/.include/(.*)/.shared/. Now when someone visits http://domain.com/test.png it first executes the existing apache rules and will (when the file/folder was not found) look in those .shared folders. So suppose I've got this filesystem: /var/www/.shared/dog.png /var/www/.shared/test.gif and /var/www/domain.com/dog.png. Now when someone visits http://domain.com/test.gif, it must load the test.gif from the .shared folder. Now when someone visits http://domain.com/dog.png it must load the dog.png from the domain.com folder (because the existing apache rules will be executed first).

  Read the article

• Windows 7 network share issues w/XP & SBS 2K3

  - by Kevin K

  Hi, my Windows 7 Ultimate 64 bit computer has issues when accessing SBS 2K3 or XP shares. 1) It will not automagically reconnect upon boot. I have a batch file that will do this that utilizes net use (yes I have /persist:yes, but it does not help) to re-map them. 2) After trying to use it for a few minutes, it will not work. Any attempt to access the drive letter that was mapped causes windows Explorer, or other apps. to lock up. These shares work fine from XP & Vista computers. When this happens the internet works fine, just the mapped drives do not work correctly.

  Read the article

• VLAN Configuration Conflict, Who Wins?

  - by Kevin

  I'm new to VLANs, so take that into consideration... Lets say that I had a server set up to create a virtual interface that is set to be tagged as VLAN 3. For example, the following Debian config: iface eth0.1 inet static address 192.168.1.1 netmask 255.255.255.0 Now on my switch, lets say that I have the port that the aforementioned server connects to, set to VLAN 4... Who wins? What are the packets tagged as, as viewed by the rest of the network?

  Read the article

• Printer deployment via Group Policy not working on a single system

  - by Aron Rotteveel

  One of my coworkers just got a new laptop running Windows 7 Pro x64. We use a GPO to deploy the printers to every system, but for some reason it is not working on this system. I have been breaking my head over this for the past 3 hours now without any result. The strange thing is that gpresult /H seems to indicate that the GPO did run. The hardware: Laptop: Windows 7 Professional x64 Print server: Windows Server 2008 x64 R1 HP Color LaserJet 2605dn HP LaserJet P2015 Driver packages on server: HP universal printer driver PCL5, both X86 as X64 Oddities and other info: GPO working flawlessly on every other system, including my own Windows 7 Ultimate X64 laptop gpresult /H shows the GPO being ran Windows Firewall completely disabled on the new laptop Below is the output for gpresult /H (in Dutch sadly, but I think you'll recognize it): Beleidsregels Windows-instellingen Printerverbindingen Pad Dominerend groepsbeleidsobject \\Server2008\HP Color LaserJet 2605dn Printers \\Server2008\HP LaserJet P2015 Printers Beheersjablonen Beleidsdefinities (ADMX-bestanden) opgehaald van de lokale computer. Configuratiescherm/Printers Beleid Instelling Dominerend groepsbeleidsobject Beperkingen van point-and-print Uitgeschakeld Printers Like I said, I have been trying to figure this out for the past few hours or so without any result, so you are my last hope. Any help is appreciated.

  Read the article

• How to block/avoid a particular IP when connecting to websites?

  - by Mark

  I'm having trouble connecting to a particular website. I can view it through a proxy, but not from home. So I ran a traceroute: Tracing route to fvringette.com [76.74.225.90] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms <snip> 2 * * * Request timed out. 3 9 ms 7 ms 27 ms rd2bb-ge2-0-0-22.vc.shawcable.net [64.59.146.226] 4 8 ms 7 ms 7 ms rc2bb-tge0-9-2-0.vc.shawcable.net [66.163.69.41] 5 10 ms 9 ms 9 ms rc2wh-tge0-0-1-0.vc.shawcable.net [66.163.69.65] 6 27 ms 23 ms 22 ms ge-gi0-2.pix.van.peer1.net [206.223.127.1] 7 18 ms 18 ms 20 ms 10ge.xe-0-2-0.van-spenc-dis-1.peer1.net [216.187.89.206] 8 9 ms 11 ms 10 ms 64.69.91.245 9 * * * Request timed out. 10 * * * Request timed out. ... Looks like this "64.69.91.245" is somehow blocking me. Can I tell my computer to avoid/bypass that IP when trying to connect?

  Read the article

• Printer deployment via Group Policy not working on a single system

  - by Aron Rotteveel

  One of my coworkers just got a new laptop running Windows 7 Pro x64. We use a GPO to deploy the printers to every system, but for some reason it is not working on this system. I have been breaking my head over this for the past 3 hours now without any result. The strange thing is that gpresult /H seems to indicate that the GPO did run. The hardware: Laptop: Windows 7 Professional x64 Print server: Windows Server 2008 x64 R1 HP Color LaserJet 2605dn HP LaserJet P2015 Driver packages on server: HP universal printer driver PCL5, both X86 as X64 Oddities and other info: GPO working flawlessly on every other system, including my own Windows 7 Ultimate X64 laptop gpresult /H shows the GPO being ran Windows Firewall completely disabled on the new laptop Below is the output for gpresult /H (in Dutch sadly, but I think you'll recognize it): Beleidsregels Windows-instellingen Printerverbindingen Pad Dominerend groepsbeleidsobject \\Server2008\HP Color LaserJet 2605dn Printers \\Server2008\HP LaserJet P2015 Printers Beheersjablonen Beleidsdefinities (ADMX-bestanden) opgehaald van de lokale computer. Configuratiescherm/Printers Beleid Instelling Dominerend groepsbeleidsobject Beperkingen van point-and-print Uitgeschakeld Printers Like I said, I have been trying to figure this out for the past few hours or so without any result, so you are my last hope. Any help is appreciated.

  Read the article

• CodePlex Daily Summary for Thursday, December 13, 2012

  CodePlex Daily Summary for Thursday, December 13, 2012Popular ReleasesHome Access Plus+: v8.6: v8.6.1213.1220 Added: Group look up to the visible property of the Booking System Fixed: Switched to using the outlook/exchange thumbnailPhoto instead of jpegPhoto Added: Add a blank paragraph below the tiles. This means that the browser displays a vertical scroller when resizing the window. Previously it was possible for the bottom edge of a tile not to be visible if the browser window was resized. Added: Booking System: Only Display Day+Month on the booking Home Page. This allows for the cs...Layered Architecture Solution Guidance (LASG): LASG 1.0.0.8 for Visual Studio 2012: PRE-REQUISITES Open GAX (Please install Oct 4, 2012 version) Microsoft® System CLR Types for Microsoft® SQL Server® 2012 Microsoft® SQL Server® 2012 Shared Management Objects Microsoft Enterprise Library 5.0 (for the generated code) Windows Azure SDK (for layered cloud applications) Silverlight 5 SDK (for Silverlight applications) THE RELEASE This release only works on Visual Studio 2012. Known Issue If you choose the Database project, the solution unfolding time will be slow....Torrents-List Organizer: Torrents-list organizer v 0.5.0.3: ????????? ? 0.5.0.3: 1) ?????????? ??????? ??? ?????????? ???-??????? ? ???????-??????. 2) ? ??????? ?????? ??????????? ?????????????? ????? ?????????? ?????????: ???? ?? ??????-???? ?????????? ?? ????????? ?? ????? ???????, ?? ? ????? ????? ????????? ????? ????????? ?? ????, ? ????????? ??? ???? ?????? ??????????.Fiskalizacija za developere: FiskalizacijaDev 2.0: Prva prava produkcijska verzija - Zakon je tu, ova je verzija uskladena sa trenutno važecom Tehnickom specifikacijom (v1.2. od 04.12.2012.) i spremna je za produkcijsko korištenje. Verzije iza ove ce ovisiti o naknadnim izmjenama Zakona i/ili Tehnicke specifikacije, odnosno, o eventualnim greškama u radu/zahtjevima community-a za novim feature-ima. Novosti u v2.0 su: - That assembly does not allow partially trusted callers (http://fiskalizacija.codeplex.com/workitem/699) - scheme IznosType...Simple Injector: Simple Injector v1.6.1: This patch release fixes a bug in the integration libraries that disallowed the application to start when .NET 4.5 was not installed on the machine (but only .NET 4.0). The following packages are affected: SimpleInjector.Integration.Web.dll SimpleInjector.Integration.Web.Mvc.dll SimpleInjector.Integration.Wcf.dll SimpleInjector.Extensions.LifetimeScoping.dllBootstrap Helpers: Version 1: First releasesheetengine - Isometric HTML5 JavaScript Display Engine: sheetengine v1.2.0: Main featuresOptimizations for intersectionsThe main purpose of this release was to further optimize rendering performance by skipping object intersections with other sheets. From now by default an object's sheets will only intersect its own sheets and never other static or dynamic sheets. This is the usual scenario since objects will never bump into other sheets when using collision detection. DocumentationMany of you have been asking for proper documentation, so here it goes. Check out the...DirectX Tool Kit: December 11, 2012: December 11, 2012 Ex versions of DDSTextureLoader and WICTextureLoader Removed use of ATL's CComPtr in favor of WRL's ComPtr for all platforms to support VS Express editions Updated VS 2010 project for official 'property sheet' integration for Windows 8.0 SDK Minor fix to CommonStates for Feature Level 9.1 Tweaked AlphaTestEffect.cpp to work around ARM NEON compiler codegen bug Added dxguid.lib as a default library for Debug builds to resolve GUID link issuesArcGIS Editor for OpenStreetMap: ArcGIS Editor for OSM 2.1 Final for 10.1: We are proud to announce the release of ArcGIS Editor for OpenStreetMap version 2.1. This download is compatible with ArcGIS 10.1, and includes setups for the Desktop Component, Desktop Component when 64 bit Background Geoprocessing is installed, and the Server Component. Important: if you already have ArcGIS Editor for OSM installed but want to install this new version, you will need to uninstall your previous version and then install this one. This release includes support for the ArcGIS 1...SharpCompress - a fully native C# library for RAR, 7Zip, Zip, Tar, GZip, BZip2: SharpCompress 0.8.2: This release just contains some fixes that have been done since the last release. Plus, this is strong named as well. I apologize for the lack of updates but my free time is less these days.Media Companion: MediaCompanion3.511b release: Two more bug fixes: - General Preferences were not getting restored - Fanart and poster image files were being locked, preventing changes to themVodigi Open Source Interactive Digital Signage: Vodigi Release 5.5: The following enhancements and fixes are included in Vodigi 5.5. Vodigi Administrator - Manage Music Files - Add Music Files to Image Slide Shows - Manage System Messages - Display System Messages to Users During Login - Ported to Visual Studio 2012 and MVC 4 - Added New Vodigi Administrator User Guide Vodigi Player - Improved Login/Schedule Startup Procedure - Startup Using Last Known Schedule when Disconnected on Startup - Improved Check for Schedule Changes - Now Every 15 Minutes - Pla...Secretary Tool: Secretary Tool v1.1.0: I'm still considering this version a beta version because, while it seems to work well for me, I haven't received any feedback and I certainly don't want anyone relying solely on this tool for calculations and such until its correct functioning is verified by someone. This version includes several bug fixes, including a rather major one with Emergency Contact Information not saving. Also, reporting is completed. There may be some tweaking to the reporting engine, but it is good enough to rel...CAML Builder: CAML Builder 1.0.0.0: First public release of CAML BuilderVidCoder: 1.4.10 Beta: Added progress percent to the title bar/task bar icon. Added MPLS information to Blu-ray titles. Fixed the following display issues in Windows 8: Uncentered text in textbox controls Disabled controls not having gray text making them hard to identify as disabled Drop-down menus having hard-to distinguish white on light-blue text Added more logging to proxy disconnect issues and increased timeout on initial call to help prevent timeouts. Fixed encoding window showing the built-in pre...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.400: Version 2.5.0.400 (Release): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete Update the documentation. InfoMan: Write the documentation. Other Downloads Downloads Overviewlog4net Dynamics CRM 2011 Appender: log4net Dynamics CRM 2011 Appender DLL: log4net Dynamics CRM 2011 Appender DLLBee OPOA Platform: Bee OPOA Demo V1.0.001: Initial version.postleitzahlensuche: Plz Suche: Eine C# Wpf Applikation, welche ermöglicht nach Postleitzahlen oder Orten zu suchen und als Ergebnis sowohl die Postleitzahl als auch den Ort liefert.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.78: Fix for issue #18924 - using -pretty option left in ///#DEBUG blocks. Fix for issue #18980 - bad += optimization caused bug in resulting code. Optimization has been removed pending further review.New ProjectsBing Maps WPF Viewer: A helpful multi layer map viewer tool. Features (more soon) : * Tile layers XYZ format * MS SQL Server spatial layerBizTalk Business Rules Engine Pipeline Framework: The BizTalk BRE Pipeline Framework provides increased flexibility in development and maintenance of pipeline components by leveraging the Business Rules Engine.Bootstrap Helpers: Html Helpers for creating Twitter Bootstrap ControlsChord Analizer: Component to help user to analizing chord of a songCodeStudyX: The learning materials of programming.faiztest22: Kudu testingFizzEdit: A multilingual code editor written in C#.FlowDOS: gGDI WebServices: Este projecto está relacionado com a cadeira de Gestão de Dados e Informação, mestrado de Sistema de Informação (Universidade de Aveiro). 2012HyperLinq - Multidimensional LINQ: HyperLINQ is an extension to LINQ that supports multidimensional arrays without dimension limit.ImageTools for WinRT: This is a poring project, so for more details information, pls refer to Sebastian Stehle's page: http://imagetools.codeplex.com/JavuHD - 2D Evolved.: An Amazing next generation High Definition 2D sdk for C#/.Net that uses OpenCL to accelerate a wide variety of features and rendering operations. All in one.MVC ActionValidator: Infrastructure for bisness validationNosso Rico Dinheirinho: Financial control system like Microsoft Money, but via web.Open Song to Chord Pro converter: A converter to convert sheet music from the Open Song format to the Chord Pro formatOpenXML Word AltChunk: Using ALTCHUNK with OPENXML and SharePoint.Project : Afspraaksysteem voor dokters (oefening opleiding Sharepoint & .Net): Een planningsysteem gemaakt door de developers van lokaal 105, in opdracht van Erdem Yarici. Dit in het kader van een Cevora/VDAB Sharepoint & .NET-opleiding.project13271213: 11SIPAS: Support Sip Client Call to FreeswitchSmall Deterministic Embedded Assembler Register Machine: SIDEARM is a minimal, virtual register machine that acts as an interpreter/shell for valid AVR assembly language execution in real-time by the virtual machine.studyx: The learning materials of programming.Unused File Detector: A small program that detects any files not used by Visual Studio solutions.Web.Ajax: Web.Ajax is an AJAX library for the .NET framework. It is designed to make it easy to add ajax functionality to an application. Windows Azure Diagnostics to SQL: Copy Windows Azure Diagnostics (WAD) data from Azure Tables to SQL server to allow for a familiar querying interface.

  Read the article

• Two-Stage Rotation Warnings

  - by Kevin Sylvestre

  I have an application that presents a modal UITabBarController. Each UIViewController contained in the UITabBarController implements should autorotate interface orientation. However, when I present the modal UITabBarController the following warnings appear in the console: Using two-stage rotation animation. To use the smoother single-stage animation, this application must remove two-stage method implementations. Using two-stage rotation animation is not supported when rotating more than one view controller or view controllers not the window delegate. Any ideas how to remove the warnings? Thanks.

  Read the article

• Programmatically Insert Page Break in Active Report

  - by Kevin Babcock

  I've been scouring the web for a good example, but cannot figure out how to add a page break to an Active Reports report programmatically. The reports I'm working with usually require 1-2 pages for each record. In order to support dual-sided printing of the reports I want to insert a blank page for each record that uses an odd number of pages, ensuring that each new record is printed on the front of each printed page. I'm very new to Active Reports, so any suggestions, code samples, or links are much appreciated!

  Read the article

• UnauthorizedAccessException on MemoryMappedFile in C# 4.

  - by Kevin Nisbet

  Hey, I wanted to play around with using a MemoryMappedFile to access an existing binary file. If this even at all possible or am I a crazy person? The idea would be to map the existing binary file directly to memory for some preferably higher-speed operations. Or to atleast see how these things worked. using System.IO.MemoryMappedFiles; System.IO.FileInfo fi = new System.IO.FileInfo(@"C:\testparsercap.pcap"); MemoryMappedFileSecurity sec = new MemoryMappedFileSecurity(); System.IO.FileStream file = fi.Open(System.IO.FileMode.Open, System.IO.FileAccess.ReadWrite, System.IO.FileShare.ReadWrite); MemoryMappedFile mf = MemoryMappedFile.CreateFromFile(file, "testpcap", fi.Length, MemoryMappedFileAccess.Read, sec, System.IO.HandleInheritability.Inheritable, true); MemoryMappedViewAccessor FileMapView = mf.CreateViewAccessor(); PcapHeader head = new PcapHeader(); FileMapView.Read<PcapHeader>(0, out head); I get System.UnauthorizedAccessException was unhandled (Message=Access to the path is denied.) on the mf.CreateViewAccessor() line. I don't think it's file-permissions, since I'm running as a nice insecure administrator user, and there aren't any other programs open that might have a read-lock on the file. This is on Vista with UAC disabled. If it's simply not possible and I missed something in the documentation, please let me know. I could barely find anything at all referencing this feature of .net 4.0 Thanks!

  Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >