Search Results

Search found 30511 results on 1221 pages for 'linux networking'.

Page 32/1221 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

  • Shareing two internet connections on my laptop running Windows XP

    - by ashwnacharya
    I have two internet connections, one is internet via our organization's corporate LAN network, and the other one is mobile broadband via a USB modem Is there anyway I can share internet connections and use them simultaneously? I want to use the corporate LAN network for normal browsing and connecting my email client, and I want to use the USB modem for establishing a VPN connection. Will I be able to maintain both the connections simultaneously? Can I have parallel downloads, one using our corporate network, and the other one using the mobile broadband? Will I be able to switch my browser between these two connections? My laptop runs Windows XP Service Pack 2.

    Read the article

  • What is a usable throughput for a home media server

    - by Craig
    I am looking to setup a home server that will act as a media server. This will include both video (possibly HD) and audio. The clients will be a fun mix of hardware but that is a different question. What I want to know is what is the minimum throughput for streaming video without hitches? Is there a "sweet" spot for throughput (price vs. throughput)? I am determining my budget for this "upgrade" and I need to evaluate wether or not upgrading to a 1 Gbps home LAN is required. Sure, it would be sweet and easily handle the traffic but I don't want to do it unless it is necesary.

    Read the article

  • Configuring home wireless network

    - by dvanaria
    I'm new to setting up a home wireless network. I have Comcast tv/internet/phone service (modem included) as well as a wireless router. My question is pretty basic. How can I tell the performance of the following parts of the network? 1. incoming internet speed 2. speed of the modem 3. speed of the wireless router I basically want as fast an internet connection as possible, of course, but I'm not sure where to look for the bottleneck (and so, not sure where I can spend some money to speed things up). Right now I'm getting about 36 Mbps (as it shows in Windows). If I run an online speed test (xfinity has one) it shows Average download speed of 14.91 Mbps and Average upload speed of 5.72 Mbps. Thanks for your help.

    Read the article

  • Two Router issue, cannot reach internet

    - by DeBuGGeR
    I have on ADSL router and one CISCO Wifi Router. The ADSL Router is working fine on its own. I am connecting the lan port of the ADSL Router to the internet(RJ45) port of my Cisco wifi router. But I cannot access the internet from the Cisco router, neither through wifi nor through ethernet connection. The IP of ADSL router is 192.168.1.1 and the ip of my Wifi router is 192.168.1.100. Should I connect to the LAN port of my Wifi router rather than using the ethernet port(Marked as Internet)?

    Read the article

  • Network Traffic Log

    - by Chris Becke
    Background - On my "home" network I have a Linksys WTR45GL router providing my internet access as well as a wireless AP. Connected I have * 2 Windows PCs (wired) * At least one laptop (Wired) * Some 802.11 enabled handheld consoles (PSPs) * A Nintendo Wii * Some windows XP pcs used by the people in the granny flat. Where I live, South Africa, well, 1Gb worth of monthly cap is, while not expensive, costly enough that I'd like to be sure that all the bandwidth used by devices on my network is ... well ... legitimate and not the result of neighbors parasiting my wireless, malware or just the result of "liberal" download policies in my software. I got the Linksys WRT45GL on the understanding that there were custom firmwares (DD-WRT and Tomato) that allowed bandwidth tracking, but there doesn't seem to be any facility to get a log of traffic that can be examined to see (a) which local devices were the biggest consumers of bandwidth and (b) what they were connected to. What tools are there for logging traffic such that, when it gets to that OMG moment in the month when all my bandwidth is gone, I have a chance to find out what the hell used it all up (and hopefully attempt some corrective action).

    Read the article

  • CSMA/CD and CSMA/CA

    - by Zia ur Rahman
    CSMA/CD is used in wired LANs, CSMA means that the computers on the network sense the medium if the medium is idle, the computer transmits otherwise it defers sending.CD refers to collision detection. I don’t want to write about CD because its not related to my Question. Now in case of wireless LANs we use CSMA/CA , here CSMA refers to carrier sensing , the Question is how carrier sensing is done in case of wireless LANs? the collision avoidance is done by sending the control message to the intended receipient.

    Read the article

  • I keep losing wireless connection

    - by posfan12
    I have a WRT54GL v1.1 wireless router and a WUSB54G v4 wireless adapter, both made by Linksys. The router is in the living room by the TV and the my computer is in the bedroom. My ISP is Brighthouse. Operating System Microsoft Windows 7 Home Premium 64-bit SP1 CPU Intel Core 2 Duo E6600 @ 2.40GHz 36 °C Conroe 65nm Technology RAM 3.00GB Single-Channel DDR2 @ 333MHz (5-4-4-14) Motherboard eMachines EMCP73VT-PM (CPU 1) 26 °C Graphics ASUS VS247 (1920x1080@60Hz) 767MB GeForce GTX 460 (nVidia) 43 °C Hard Drives 466GB Seagate ST350041 8AS SCSI Disk Device (SATA) 35 °C Optical Drives HL-DT-ST DVDRAM GH41N SCSI CdRom Device Audio High Definition Audio Device The problem is that my Internet connection will work fine for 15 minutes or so. Then the data will just stop flowing. Windows says I am still connected, and the systray icon still shows five bars. But Comodo Firewall will stop showing up and down traffic, and another of my systray applications complains about a lack of connection. What I usually do is either disconnect from the network manually, or unplug and re-plug the USB adapter. At which point the connection will work properly for another 15 minutes. I've tried unplugging my router for 30 seconds and letting it reboot. I've also tried looking for a newer driver for my adapter but I seem to have the latest version 3.1.3.0. This is a recent problem starting about a week ago. For the previous several months things were working just fine. I haven't made any changes to my system that I am aware of. The only thing I did was open my case to blow the dust out of it, then put everything back together. How do I fix this issue?

    Read the article

  • Using a Netgear WGR614v9 to extend wireless signal from Netgear DG934GT

    - by moorcroft
    I'm wondering if someone could please provide me the steps for extending/repeating my wirless signal so that I can have greater wireless range throughout my house. I have 2 wirless Netgear routers, a DG934GT ADSL router (base unit) and WGR614v9 cable router (repeater). I've flashed both routers with the latest firmware and have turned on the wireless repeating function in the WGR614v9 but I can't get internet access when connected to the repeater, I can only get it when connected to the base unit. Can this be achieved by running an ethernet cable between the two routers as thus far I've only tried to get them to contact each other wirelessly. Any help would be appreciated

    Read the article

  • Using 1920x1200 mode on SyncMaster T260HD in Linux

    - by dagorym
    I just got a Samsung SyncMaster T260HD monitor. It works straight out of the box with Windows but I can't seem to get it to work with Linux, which is my primary OS for day to day work. The computer boots up but when going into graphical mode on Linux the monitor gives me a "Mode not supported" error and doesn't display anything. I booted up windows and, using PowerStrip, grabbed the exact ModeLine that should be used to get the equivalent setting in Linux and added it to my xorg config file but it doesn't seem to help. the ModeLine is: ModeLine "1920x1200" 153.9 1920 1984 2016 2080 1200 1203 1209 1235 +hsync -vsync This is the modeline for the working display settings in windows but it doesn't seem to work in Linux My complete entry in the xorg.conf file for the monitor is Section "Monitor" Identifier "Monitor0" ModelName "SyncMaster" DisplaySize 518 324 HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 Option "dpms" ModeLine "1920x1200" 153.9 1920 1984 2016 2080 1200 1203 1209 1235 +hsync -vsync EndSection I'm running Scientific Linux 5.4 (clone of Redhat Enterprise Linux 5.4) but I've tried booting with a recent Linux Mint Distro as well as Ubuntu 9.04 and had the same problem. Any suggestions on other things I should try or might be missing? If anyone's gotten this to work I'd love to know. Thanks.

    Read the article

  • How to sniff for wireless MAC addresses in area - My laptop got stolen

    - by Mr AJL
    A few days ago my apartment got broken in, and they took all the electronics, including my $1500 laptop. We are pretty sure it's an inside job (as in someone from the same building), so I believe that the stuff is in someones apartment. Is there any tool that tells you what wireless adapters are active within range? I have my laptops MAC address, so I could use that to find out who stole it. I think it's worth a shot. Any help is appreciated thanks!

    Read the article

  • LogMeIn Hamachi for Linux

    - by tlunter
    So far most of my work using LogMeIn Hamachi has been from either a Mac OS X or Windows system to Windows or a Linux Computer. Recently I purchased a mini computer and have been running Ubuntu Server on it, as my little server. I knew LogMeIn had a Linux client that is command line only, but I often do all my work via command line anyway, so that wasn't an issue. I added my user to the correct local file so that I could run the hamachi daemon without sudo, and was able to connect to LogMeIn's service. I decided to set up my Linux server as a git server as well, and set it up correctly. The thing is, the server is behind my schools firewall and I need to use hamachi to get around that. Since most of the time I was using either Mac or Windows, I never had an issue sshing onto any of my computers since LogMeIn is fully featured for these OSs. From Linux (Arch) though, it seems like the client cannot correctly route to the LogMeIn IPs. I know from Windows I can connect to the Linux computers, both of them. From Linux (Arch) though, I can't connect to my Mac, Windows, or Linux server. It keeps just dropping the connection. I was wondering if there was some configuration that I would need to make for this to work. I understand that it is most likely going to be a static configuration since I assume it has to do with the computer not understanding that 5.*.*.* actually refers to another IP:Port. Has anyone had any experience getting this to work?

    Read the article

  • Windows 7 wireless not seeing any networks

    - by jkohlhepp
    I think I have managed to confuse Windows 7. When I did the install, I had the network cable plugged in to my router, but the wireless card was also enabled. During the install, Windows 7 seemed to see my wireless network and even asked me for the WEP key. I know that it used the WEP key because I initially entered an invalid one and it gave me an error. Then the network said "SoAndSoWireless Connected". However, when I unplug or disable my wired network card, then I have no internet, and it can't see any networks. When I plug in the wired network card, it says "SoAndSoWireless Connected". Under Network and Internet Network Connections I have "Local Area Connection" and "Wireless Network Connection". The wired one's status is "SoAndSoWireless" and the wireless status is "Not Connected". Also, the wireless connection can't seem to see any other wireless networks in the area and I know there are tons. My neighbors have several. I've somehow seemingly confused Windows 7 into thinking that my wired network card is my wireless card or something. Any ideas on how to un-confuse it? This is a desktop machine by the way, if it matters. EDIT: Ah, I think part of the problem is that I named my network accidentally the same as the name of the wireless network being broadcast by the wireless router. So that might be why it says that name on the hard-wired connection. Perhaps the drivers just are completely not working for the wireless card. Thanks, ~ Justin

    Read the article

  • Windows Vista to Windows 7 Gbit LAN slow file copy

    - by ashgromnies
    I have two computers with gigabit LAN, one running Windows 7 and the other running Vista. I have a D-Link DIR-655 router, with gigabit LAN ports. I created a shared directory on the Vista computer, mapped it as a network drive on the Win 7 computer, and tried copying a 2 GB file... and it's going at 900 KB/s Yep... 900 kilobytes per second, about 7 Mb/s. Why so slow? Any ideas?

    Read the article

  • Netgear Wireless-n 150 wrn1000v2

    - by Jordan
    I'm not sure if this is the place to ask this question, move it if it's not. I'm trying to fix a wireless network. It only connects to a few devices and when it does work the connection is spotty. The router is a netgear wireless-n 150 wrn1000v2. Connecting to the router isn't a big problem, but connecting to the internet via WiFi is. I can't upgrade the firmware becuase it is from Comcast and it seems as though they only allow their versions of the firmware. I've monitored the network with wireshark and I see that the devices that are having trouble connecting are constantly asking "who is 192.168.1.1 tell 192.168.1.x" where x is the ip for the device. 192.168.1.1 is the router. This is from running wireshark on the wireless device. What does this mean. At this point I feel like buying a new router is the only option.

    Read the article

  • iftop Shows Lots of Mysterious Connections - Not Showing in netstat

    - by HOLOGRAPHICpizza
    I've just stopped all pretty much all services except sshd on my server (Ubuntu Server 10.04), and when I run iftop I get output that looks like this: 12.5Kb 25.0Kb 37.5Kb 50.0Kb 62.5Kb mqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqq flash.gateway.2wire.net:ssh <=> 172.16.1.151:60405 1.75Kb 1.54Kb 2.22Kb flash.gateway.2wire.net:21095 <=> 69.127.29.20:32582 536b 107b 27b flash.gateway.2wire.net:21095 <=> 190.164.122.134:13557 0b 105b 26b flash.gateway.2wire.net:21095 <=> 79.165.212.195:45138 0b 105b 26b flash.gateway.2wire.net:21095 <=> 151.42.15.151:9031 0b 72b 18b flash.gateway.2wire.net:21095 <=> 88.185.120.179:51413 0b 0b 49b flash.gateway.2wire.net:21095 <=> 178.120.152.97:25924 0b 0b 29b flash.gateway.2wire.net:21095 <=> 109.110.217.77:27868 0b 0b 26b flash.gateway.2wire.net:21095 <=> 84.13.201.90:16509 0b 0b 26b flash.gateway.2wire.net:21095 <=> 171.7.125.224:11777 0b 0b 26b flash.gateway.2wire.net:21095 <=> 115.177.164.170:21360 0b 0b 26b flash.gateway.2wire.net:21095 <=> 50.88.126.18:25540 0b 0b 25b flash.gateway.2wire.net:21095 <=> 223.206.230.163:13431 0b 0b 25b flash.gateway.2wire.net:21095 <=> 78.144.187.26:24515 0b 0b 25b flash.gateway.2wire.net:21095 <=> 83.20.61.211:27572 0b 0b 25b flash.gateway.2wire.net:21095 <=> 82.134.151.42:18448 0b 0b 18b flash.gateway.2wire.net:21095 <=> 126.117.95.247:25316 0b 0b 18b flash.gateway.2wire.net:21095 <=> 116.202.65.230:9044 0b 0b 18b flash.gateway.2wire.net:21095 <=> 88.120.63.205:51413 0b 0b 17b qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq TX: cumm: 61.6KB peak: 8.00Kb rates: 1.59Kb 1.38Kb 2.04Kb RX: 18.4KB 1.64Kb 696b 549b 640b TOTAL: 80.0KB 9.64Kb 2.27Kb 1.92Kb 2.66Kb This is the first part (not the unix socket part) of the output of netstat -a: Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 *:ssh *:* LISTEN tcp 0 0 *:55677 *:* LISTEN tcp 0 0 flash.gateway.2wire:ssh 172.16.1.151:60405 ESTABLISHED tcp 0 48 flash.gateway.2wire:ssh 172.16.1.151:60661 ESTABLISHED tcp6 0 0 [::]:ssh [::]:* LISTEN udp 0 0 *:37790 *:* What could all those strange connections on port 21095 be? And why would they not show up in netstat?? Any advice would be greatly appreciated.

    Read the article

  • Setting up a wireless connection b'ween 2 clients

    - by shadeMe
    I've got a DLINK router connected to my ADSL modem that forms the hub of my home network. I've two clients - A desktop with an onboard wireless adaptor and a laptop that's outfitted with the same. The former runs Windows 7 x64, the latter Windows XP x86. I'd like to setup a wireless connection between the two that would allow me play games over to and to a lesser extent, transfer and stream data. How would I go about doing it ?

    Read the article

  • What are some of the best wireless routers for a price-conscious home power-user?

    - by Alain
    I'm extremely dissatisfied with the 'popular' choice for routers in homes and small offices. They are expensive (upwards of 60$), lack a great deal of useful configuration options, and seem to need to be restarted quite often. (Linksys comes to mind). I've been on the market for a good router lately, and slowly collecting a set of requirements I feel good routers should meet. Maximum number of TCP/IP connections. - This isn't something I see any routers advertise, but in terms of supporting torrent applications, I've been screwed by routers that support less than 20 here. From what I understand a fairly standard number is 200, but there are not so expensive routers that support thousands. Router configuration menu - Most have standard menu's that let you set up basic things like your wireless network encryption settings, uPnP, and maybe even DMZ (demilitarized zones). An absolute requirement for me, however, are routers with good enough firmware to support: Explicit Port forwarding Assigning static local ips to specific mac addresses, or at least Port forwarding by MAC address Port, IP and MAC filtering Dynamic DNS service for home users who want to set up a server but have a dynamic IP Traffic shaping (ideally) - giving priority to packets from certain machines or over certain ports. Strong wireless signal - If getting a reliable signal requires me to be so close to the router that I can connect an Ethernet cable, it's not good enough. As many Ethernet ports as possible. - Because I want to be able to switch from console gaming to PC gaming without visiting my router. So far, the best thing I've stumbled upon (in the bargain bin at staples) was a 20$ retail plus router. It was meant to be the cheapest alternative until I could find something better to purchase online, but I was actually blown away by the firmware capabilities. It supports defining reserved bandwidth for certain network traffic, dynamic DNS, reserving local IPs for specific MAC addresses, etc. At 2 am when my roommate is killing our Internet with their torrents, I can limit their bandwidth without outright blacklisting them. I have, however, met serious limitations when it comes to network traffic between local machines. It claims a 300Mbps connection, but I have trouble streaming videos from my PC to my console or other laptops wirelessly. It has a meltdown and needs to be reset once in a while (no more than a couple times a month), and it's got a 200 connection limit. There 4 Ethernet ports in the back but I'm pretty sure the first doesn't work. So some great answers to this question would be: Any metrics you use to compare routers, and requirements you have for new candidates. The best routers you've found for supporting home servers, file management systems, high volume torrent traffic, good price/feature ratio, etc. Good configuration advice (aside from 'use Ethernet whenever possible') Thanks for your feedback and experiences!

    Read the article

  • is it possible to get IP address of a wifi that you are not connected to

    - by coltonon
    Just like the question states. Is it somehow possible to get the IP address of a network that you don't have access to? For example, if you click the little wifi button on your task bar, and highlight your cursor over one of the options, you get some info. But your external IP address is actually the address of the router, isn't it? Which would mean you would have to connect to the wifi, and then the router to get an IP address, correct? I realy just want a simple answer: No or Yes and here's how

    Read the article

  • NAT ports - how do they work?

    - by Davidoper
    I have the following network schema: Computer A: three nics: NIC 1 (eth0): dhcp, public internet NIC 2 (eth1): static 192.168.1.1, gateway for Computer B NIC 3 (eth2): static 192.168.2.1, gateway for Computer C Computer B: static 192.168.1.2, using gateway 192.168.1.1 (NIC 2). Computer C: static 192.168.2.2, using gateway 192.168.2.1 (NIC 3). So I applied this to get NAT working: iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE Every computer can connect to the internet now. I have been applying rules to the main computer (Computer A), like dropping connections to some ports, e.g ssh: iptables -A INPUT -p tcp --dport 22 -j DROP But for instance, now I would like only allow connections for ports 20,21,22,53 and 80 in Computer C, and ignore the outside traffic if it's not related to those ports. The allowed connections should be FROM Computer C to outside, but not from outside to Computer C (I mean - Computer C is not hosting any HTTP or SSH, but it is going to use them as a client). I guess this sould be done like this: iptables -A OUTPUT -i eth2 -o eth0 -p tcp --dport 21 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i eth2 -o eth0 -p tcp --sport 21 -m state --state ESTABLISHED -j ACCEPT The last rule (dropping any other traffic different from those) is at the end of the configuration, so -A should be working correctly. The thing is... it is not working. If I put the last rule like this: iptables -A FORWARD -i eth2 -o eth0 -j DROP It just drops everything and, for instance, port 21 (previously opened as you can see above) is not either working. Can you tell me what could I have done wrong? I have been struggling with this problem for some time and I am unable to solve it. Thanks!

    Read the article

  • DD-WRT router causing IP address conflicts across network

    - by r.tanner.f
    My DD-WRT router has lost its mind! I just set up two DD-WRT routers, one as a WAP (working fine) and one in Client Bridge (routed) mode (the problem). Not long after setup I started seeing IP address conflicts on other machines. The event log always points the finger at my Client Bridge router's MAC address. Neighbour table overflow The log on my router is flooded with Neighbour table overflow errors. These start a minute or two after boot. The network is rather large, with +200 IP addresses being used in this subnet. The other router shows no such errors. Mass ARP requests from 1.1.1.1 I'm also seeing constant ARP requests (with the problem router's MAC address) from 1.1.1.1. Seems like it's bugging everything on the network for its MAC address and then promptly forgetting it (or never receiving a response). Configuration: Model: Buffalo N600 Firmware: DD-WRT v24SP2-MULTI (03/21/11) Wireless Mode: Client Bridge (routed) I'm not sure what configuration details are relevant and I'd rather not have comments flooded, so just ping me in this chat if you want to know something. Why is my router stealing IP addresses and how can I stop it?

    Read the article

  • 802.11N Windows XP Clients Unable to See Each Other

    - by zippy_raggle
    I am attempting to update my wireless network from 802.11g to 802.11n. When connected to the 'G' access point, the client laptops (there are 7 running Windows XP) are able to connect and browse the network for each other. When I connect them to the 'N' access point they can see the access point, but not the rest of the network. I tried swapping out the access point with a wireless router, but this did not change anything. I verified in both the AP and the router that isolation was turned off. Searching the web has not turned up any other ideas. The manuals don't show anything either. Why can't my wireless client nodes see each other on the 'N' network?

    Read the article

  • Using wireless interface in guest OS with bridged network in VMware fusion 3

    - by Chetan
    I'm running Ubuntu in Snow Leopard with VMware fusion 3, and I want to be able to access the wireless network on eth1 within Ubuntu so I can run tools like aircrack-ng. However, the bridged network that VMware sets up connects my Airport interface in Mac to the wired interface eth0 in Ubuntu. How do I set it up so that the Airport interface is connected to the wireless interface eth1 in Ubuntu?

    Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >