Search Results

Search found 2809 results on 113 pages for 'mike bell'.

Page 32/113 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

• How to hack airport extreme to support USB 3G modem?

  - by Mike Caron

  Has anyone out there ever tried to hack the Airport Extreme, specifically with regard to the USB port? There are many cellular routers available that provide WiFi sharing of a USB modem link. However, instead of buying yet another router, I'd like to use my expensive Airport Extreme with it. The AE has a USB port on the back, but it's been said that it only talks to printers. Is there a way to hack the USB driver on the AE to allow it to recognize a USB modem, then use that as the connectivity instead of the LAN? I would imagine that one could use OpenFirmware to boot something on the AE. If one can boot it, then one could provide access using SSH across the lan. Once access is granted, then let the hacking begin... but I don't know how to (a) get the mini-osx on to USB (is it the same as the ATV without a UI?) or (b) how to load up certain things once boot has begun.

  Read the article

• SSH Tunneling from Windows to Linux/Ubuntu

  - by Mike

  My question is for my girlfriend basicly.... She works at a mall and doesn't do much so she likes to get on myspace and facebook as most girls do and yahoo to check her email. Well she uses her laptop to connect to a wireless network that doesn't allow it.... so I did some research and got putty and connected to my linux box I have here at home and it worked somewhat. My problem is it only views my webpages I have created here on this box it won't go outside of the linux host. I did it like this in putty... port is 1000 and hostname:80 is what I got outa my research then connected after seting up the tunnel bam worked for all webpages on my box but when she puts in www.myspace.com it redirects to my index.php in my var/www and won't travel outside that as I said.. Any help would be much obliged.

  Read the article

• How do you fix the Performance Dashboard datetime overfow error

  - by Mike L

  I'm a programmer/DBA by accident and we're running SQL Server 2005 with Performance Dashboard for basic monitoring. The server has been up for a few weeks and now we can't drill into certain reports. Is there any way to reset these reports without a complete reboot? edit: I bet the error message would help. I get this when I drill into the CPU graph: Error: Difference of two datetime columns caused overflow at runtime.

  Read the article

• SSI includes not working on Debian with Apache

  - by Mike

  I'm trying to get SSI to work on Debian running Apache, however the .shtml files are not being parsed. From a PHP file with phpinfo() I can see that the following show up in the loaded modules section: mod_mime_xattr mod_mime mod_mime_magic In /etc/apache2/mods-enabled/mime.conf I have (among other things): AddType text/html .shtml AddOutputFilter INCLUDES .shtml In /etc/apache2/sites-enabled/domain.com.conf (for the virtual host in question) I have: <Directory /home/username/public_html> Options +Includes allow from all AllowOverride All </Directory> and for good measure, I added the following as well: <Directory /> Options +Includes </directory> In the user's .htaccess file, I tried adding: Options +Includes AddType text/html shtml AddHandler server-parsed shtml Nothing seems to work. How can I even debug this? Edit: Here is the output of ls /etc/apache2/mods-enabled/ in case this helps actions.conf dav_svn.load proxy_balancer.load actions.load deflate.conf proxy.conf alias.conf deflate.load proxy_connect.load alias.load dir.conf proxy_http.load auth_basic.load dir.load proxy.load auth_digest.load env.load python.load authn_file.load fcgid.conf reqtimeout.conf authz_default.load fcgid.load reqtimeout.load authz_groupfile.load mime.conf rewrite.load authz_host.load mime.load ruby.load authz_user.load mime_magic.conf setenvif.conf autoindex.conf mime_magic.load setenvif.load autoindex.load mime-xattr.load ssl.conf cgi.load negotiation.conf ssl.load dav_fs.conf negotiation.load status.conf dav_fs.load php5.conf status.load dav.load php5.load suexec.load dav_svn.conf proxy_balancer.conf

  Read the article

• API Management Solutions

  - by Mike

  I'm currently building an API and am looking for a tool to allow me to monitor (in a GUI) and rate limit usage. I've come across a few enterprise solutions including: http://apigee.com/ http://mashery.com/ http://www.layer7tech.com/ http://www.3scale.net/ The Apigee enterprise plan is exactly what I'm looking for but plans start at $3000 / month which is out of my price range. The other solutions are all either to expense or do not provide the solution I'm looking for. This led me to look at some open source options including: http://apiaxle.com/ https://code.google.com/p/varnish-apikey/wiki/UsageManual Varnish seems like a fairly complete solution, however I would need to build a GUI to visualise the data. My final option would to build a solution from scratch using EventMachine and ruby. Any advice?

  Read the article

• Windows Server traffic monitor that show traffic for each connected IP

  - by Mike Trader

  I would like to see traffic in bytes of individual users (IP's) in real time. Logging would be good too. Additionally I would like to see which process (CGI.exe, php script etc) they are connected to or minimally what the GET/POST request was. I have looked at many server monitoring tools but have not found something like this. Any suggestions would be appreciated.

  Read the article

• Old Hardware Specifications

  - by billswift

  Anyone know where I can get specs for old monitors and soho computers? I'm setting up some old computers as linux boxes and especially need monitor specs for setting X Window System parameters. Right now I need specs for a Packard Bell 1024S monitor.

  Read the article

• Oracle 10g for Windows does not start up on system boot

  - by Mike Dimmick

  We have an Oracle 10g Enterprise Edition installation (10.2.0.1.0) on a Windows Server 2003 virtual machine. It was initially created with Virtual Server 2005 R2 SP1 but has now been migrated to Windows Server 2008 Hyper-V. The services start on system boot, but the instance does not start up. This problem was actually occurring on Virtual Server after a migration from one server to another, but I managed to fix it then with: oradim -edit -sid ORCL -startmode auto However, this now has no effect. oradim.log (in %OracleHome%\database\oradim.log) says: Thu Jun 10 14:14:48 2010 C:\oracle\product\10.2.0\db_3\bin\oradim.exe -startup -sid orcl -usrpwd * -log oradim.log -nocheck 0 Thu Jun 10 14:14:48 2010 ORA-12560: TNS:protocol adapter error sqlnet.log in the same folder has: Fatal NI connect error 12560, connecting to: (DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleorcl)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=orcl)(CID=(PROGRAM=C:\oracle\product\10.2.0\db_3\bin\oradim.exe)(HOST=ORACLE-VM)(USER=SYSTEM)))) VERSION INFORMATION: TNS for 32-bit Windows: Version 10.2.0.1.0 - Production Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production Time: 10-JUN-2010 14:14:48 Tracing not turned on. Tns error struct: ns main err code: 12560 TNS-12560: TNS:protocol adapter error ns secondary err code: 0 nt main err code: 530 TNS-00530: Protocol adapter error nt secondary err code: 2 nt OS err code: 0 The ORA_ORCL_AUTOSTART registry value is set to TRUE, so it should be auto-starting - and you can see that it's trying to. The problem also occurs when stopping and restarting the OracleServiceORCL service. I've enabled SQL*Net tracing which shows: [10-JUN-2010 15:09:33.919] snlpcss: entry [10-JUN-2010 15:09:34.419] snlpcss: Unable to spawn Oracle oracle (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq))) orcl, error 2. [10-JUN-2010 15:09:34.419] snlpcall: exit On a hunch that error 2 is Windows error 2 (file not found) I tried restarting the service with Process Monitor watching oradim.exe, but this appears to delay things just enough that it always works. Right now I have a horrible hack where I've created a Scheduled Task to run oradim -startup -sid ORCL when the Administrator account logs on, and set the VM to auto-logon. I'd still like to work out why it's not working.

  Read the article

• Error in data view when connecting to an Oracle DB

  - by Mike Polen

  When using SharePoint Designer I found this link that stepped me through how to get it working: http://spsolution.blogspot.com/2008/12/how-to-insert-data-source-in-sharepoint.html That allowed SharePoint Designer to talk to Oracle, but when I placed a data view on a page it gave me the following error: Error while executing web part: System.Data.OracleClient.OracleException: ORA-00923: FROM keyword not found where expected at System.Data.OracleClient.OracleConnection.CheckError(OciErrorHandle errorHandle, Int32 rc) at System.Data.OracleClient.OracleCommand.Execute(OciStatementHandle statementHandle, CommandBehavior behavior, Boolean needRowid, OciRowidDescriptor& rowidDescriptor, ArrayList& resultParameterOrdinals) at System.Data.OracleClient.OracleCommand.Execute(OciStatementHandle statementHandle, CommandBehavior behavior, ArrayList& resultParameterOrdinals) at System.Data.OracleClient.OracleCommand.ExecuteReader(CommandBehavior behavior) at System.Data.OracleClient.OracleCommand.ExecuteDbDataReader(CommandBehavior behavior) at System.Data.Common.DbCommand.Syst... 09/14/2009 14:40:23.52* w3wp.exe (0x0FA0) 0x1A88 Windows SharePoint Services Web Parts 89a1 Monitorable ... em.Data.IDbCommand.ExecuteReader(CommandBehavior behavior) at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) at System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) at Microsoft.SharePoint.WebControls.SingleDataSource.GetXPathNavigatorInternal() ... 09/14/2009 14:40:23.52* w3wp.exe (0x0FA0) 0x1A88 Windows SharePoint Services Web Parts 89a1 Monitorable ... at Microsoft.SharePoint.WebControls.SingleDataSource.GetXPathNavigator() at Microsoft.SharePoint.WebControls.SingleDataSource.GetXPathNavigator(IDataSource datasource, Boolean originalData) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.GetXPathNavigator(String viewPath) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform() I am mystified.

  Read the article

• Able to connect by SSH, but not x2go

  - by Mike

  I am having trouble connecting to a remote server with X2GO using a DSA key. Connecting works fine over SSH, but when I try to connect with X2GO, it goes immediately to the username/password box and doesn't want to use the private key I specify in the options. If I select "Try auto login" it appears to try to connect and then I get the following error: No public key matched Access denied. Authentication that can continue: publickey It was working previously, but I reinstalled the client OS and since then I am unable to connect. I copied all of the SSH keys over from the previous installation. I also tried deleting my ~/.ssh/known_hosts file and adding the key to ssh-agent with no success, but the key is definitely added correctly: $ ssh-add -l 1024 b9:3d:e5:ef:48:ea:fc:c6:6e:45:89:b5:35:e7:58:39 server.com_dsa (DSA) Note, if I enable password authentication on the server, I can connect fine, however I would like to use publickey. Any ideas how I can connect with public key authentication?

  Read the article

• DRBD Not syncing between my nodes

  - by Mike Curry

  Some version info: Operating system is Ubuntu 11.10, on EC2, kernel is 3.0.0-16-virtual and the application info is: Version: 8.3.11 (api:88) GIT-hash: 0de839cee13a4160eed6037c4bddd066645e23c5 build by buildd@allspice, 2011-07-05 19:51:07 Getting some strange errors in dmesg (seen below) as well, there is no replication happening. I have made my first node primary and its showing: drbd driver loaded OK; device status: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 m:res cs ro ds p mounted fstype 0:r0 StandAlone Primary/Unknown UpToDate/DUnknown r----s ext3 my secondary node is showing: drbd driver loaded OK; device status: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 m:res cs ro ds p mounted fstype 0:r0 StandAlone Secondary/Unknown Inconsistent/DUnknown r----s Showing /proc/drbd on the master shows: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 0: cs:StandAlone ro:Primary/Unknown ds:UpToDate/DUnknown r----s ns:0 nr:0 dw:4 dr:1073 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:262135964 Showing /proc/drbd on the slave shows that there is nothing being transfered... version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 0: cs:StandAlone ro:Secondary/Unknown ds:Inconsistent/DUnknown r----s ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:262135964 Here is my config... resource r0 { protocol C; startup { wfc-timeout 15; degr-wfc-timeout 60; } net { cram-hmac-alg sha1; shared-secret "test123; } on drbd01 { device /dev/drbd0; disk /dev/xvdm; address 23.XX.XX.XX:7788; # blocked out ip meta-disk internal; } on drbd02 { device /dev/drbd0; disk /dev/xvdm; address 184.XX.XX.XX:7788; #blocked out ip meta-disk internal; } } I have run the following on the master: sudo drbdadm -- --overwrite-data-of-peer primary all There is no firewall between the systems. Here is the dmesg with some errors: [2285172.969955] drbd: initialized. Version: 8.3.11 (api:88/proto:86-96) [2285172.969960] drbd: srcversion: DA5A13F16DE6553FC7CE9B2 [2285172.969962] drbd: registered as block device major 147 [2285172.969965] drbd: minor_table @ 0xffff88000276ea00 [2285173.000952] block drbd0: Starting worker thread (from drbdsetup [1300]) [2285173.003971] block drbd0: disk( Diskless -> Attaching ) [2285173.006150] block drbd0: No usable activity log found. [2285173.006154] block drbd0: Method to ensure write ordering: flush [2285173.006158] block drbd0: max BIO size = 4096 [2285173.006165] block drbd0: drbd_bm_resize called with capacity == 524271928 [2285173.008512] block drbd0: resync bitmap: bits=65533991 words=1023969 pages=2000 [2285173.008518] block drbd0: size = 250 GB (262135964 KB) [2285173.079566] block drbd0: bitmap READ of 2000 pages took 17 jiffies [2285173.081189] block drbd0: recounting of set bits took additional 1 jiffies [2285173.081194] block drbd0: 250 GB (65533991 bits) marked out-of-sync by on disk bit-map. [2285173.081203] block drbd0: Suspended AL updates [2285173.081210] block drbd0: disk( Attaching -> UpToDate ) [2285173.081214] block drbd0: attached to UUIDs 1C1291D39584C1D1:0000000000000004:0000000000000000:0000000000000000 [2285173.095016] block drbd0: conn( StandAlone -> Unconnected ) [2285173.095046] block drbd0: Starting receiver thread (from drbd0_worker [1301]) [2285173.099297] block drbd0: receiver (re)started [2285173.099304] block drbd0: conn( Unconnected -> WFConnection ) [2285173.099330] block drbd0: bind before connect failed, err = -99 [2285173.099346] block drbd0: conn( WFConnection -> Disconnecting ) [2285173.295788] block drbd0: Discarding network configuration. [2285173.295815] block drbd0: Connection closed [2285173.295826] block drbd0: conn( Disconnecting -> StandAlone ) [2285173.295840] block drbd0: receiver terminated [2285173.295844] block drbd0: Terminating drbd0_receiver Edit: Reading some other similar issues, it was suggested to do a 'drbdadm dump all', so I figured it couldn't hurt. ubuntu@drbd01:~$ drbdadm dump all /etc/drbd.conf:19: in resource r0, on drbd01: IP 23.XX.XX.XX not found on this host. and on slave: root@drbd02:~# drbdadm dump all /etc/drbd.conf:25: in resource r0, on drbd02: IP 184.XX.XX.XX not found on this host. Strange it doesn't find its own ip, however, this is an Amazon EC2 system using an elastic IP... here are my ipconfigs for both... master: ubuntu@drbd01:~$ ifconfig eth0 Link encap:Ethernet HWaddr 22:00:0a:1c:27:11 inet addr:10.28.39.17 Bcast:10.28.39.63 Mask:255.255.255.192 inet6 addr: fe80::2000:aff:fe1c:2711/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1569 errors:0 dropped:0 overruns:0 frame:0 TX packets:1169 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:124409 (124.4 KB) TX bytes:213601 (213.6 KB) Interrupt:26 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) slave: root@drbd02:~# ifconfig eth0 Link encap:Ethernet HWaddr 12:31:3f:00:14:9d inet addr:10.160.27.107 Bcast:10.160.27.255 Mask:255.255.254.0 inet6 addr: fe80::1031:3fff:fe00:149d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:915 errors:0 dropped:0 overruns:0 frame:0 TX packets:774 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:75381 (75.3 KB) TX bytes:109673 (109.6 KB) Interrupt:26 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

  Read the article

• Removing Windows 2003 Server and Domain from Network

  - by Mike Ruford

  I have a Windows-2003-Server with five computers (Windows XP) accessing it using a domain. I would like to remove the server and the domain and go straight to peer to peer (file sharing via a NAS). We are moving our email to an Exchange Hosting Provider. We no longer need people to log in from different computers and have their desktops available from any computer on the network (however, I do want to get those files off of this setup). Any suggestions?

  Read the article

• Returning row values based on conditional formatting variables

  - by Mike Bodes

  I'm not entirely sure how to properly explain this, but here we go... I'm trying to create a single budgeting document that allows me to manage purchasing and reconciliation for multiple projects. I would like to create separate sheets per project and have purchased items populate on a master sheet. Using conditional formatting, I've set one of the columns to display an item's status (waiting for approval, approved, ordered, received). I would like the contents of an entire row to populate in a new sheet table once the status is set to "Received." The sheet should update descendingly. I can't attach an image because I don't have a 10 reputation.. Any help is greatly appreciated.

  Read the article

• Selinux interfering with vboxwebsrv or phpvirtualbox

  - by Mike W

  I have a brand new installation of Fedora 18, with a brand new installation of Virtualbox 4.2. I have spent a painful few hours trying to get phpVirtualBox working. Apache 2.4 and PHP 5.4 are installed, along with the phpVirtualBox software. Attempting to access phpVirtualBox allowed me to login, but then I'd have a prolonged wait until an 'Error fetching HTTP headers' message appeared. Finally, I set SeLinux to permissive, and Bingo! things start to work. For some reason the SeLinux Troubleshooter isn't flagging any messages from SeLinux, I don't know what to look for now. This is a development box so I could leave SeLinux set to permissive but I will need to make this work in anger on the next project. My question, then, is this: What changes to SeLinux policies do I need to make to allow phpVirtualBox and vboxwebsrv to work together? If there's more information I can post that will assist I'll gladly post it - just let me know what it is.

  Read the article

• NGINX SSI Not working

  - by Mike Kelly

  I'm having trouble getting SSI to work on NGINX. You can see the problem if you hit http://www.bakerycamp.com/test.shtml. Here is the contents of that file: <!--# echo hi --> If you hit this in a browser, you see the SSI directive in the content - so apparently NGINX is not interpreting the SSI directive. My NGINX config file looks like this: server { listen 80; server_name bakerycamp.com www.bakerycamp.com; access_log /var/log/nginx/bakerycamp.access.log; index index.html; root /home/bakerycamp.com; location / { ssi on; } # Deny access to all hidden files and folders location ~ /\. { access_log off; log_not_found off; deny all; } } I did not build NGINX from sources but installed it using apt-get. I assume it has the SSI module (since that is default) but perhaps not? Should I just bite the bullet and rebuild from sources? Is there anyway to tell if the installed NGINX supports SSI and my config is just wrong?

  Read the article

• HISTCONTROL=ignoreboth not working Debian Lenny

  - by Mike

  Can anybody confirm if by setting the the following environmental variables under debian lenny will make previous history entries not to be saved. GNU bash, version 3.2.39(1)-release export HISTCONTROL=ignoreboth export HISTSIZE=500 I have added them to my /etc/bash.bashrc but I keep getting repeated commands. Thanks

  Read the article

• Replacement Alternative for Dell FY606 in a Poweredge T105

  - by Mike C

  I have recently upgraded my Poweredge T105 server to use a SAS 6/ir RAID controller. Unfortunately, I did not realize at the time that adding the card would cause the BIOS to complain about a missing hard drive fan. This warning requires that a user press F1 to continue, which is disastrous in a server environment. I have searched all over found that the specific part I need is a Dell FY606 fan. However, I have yet to find a suitable retailer that covers this part. I have contacted Dell and they do not have this part in stock. Are there any alternative models of a fan that I could use in place of an FY606? Seems like a pretty straightforward part, just a fan that connects to a 4-pin power connector on the motherboard.

  Read the article

• Why did my Cisco router hang?

  - by Mike Pennington

  We have a Cisco 1841 in our storage IDF that was originally running a 12.4(1) IP-BASE image; I wanted to upgrade to an advancedservicesk9-mz image, but the flash did not have enough space, so I deleted the running image. Later I tried inserting a larger CF from a Catalyst4500, which crashed the 1841 router (now without a bootable image). Using another 1800 series router, I loaded the 12.4(25g) advancedservicesk9 image and verified the image checksums. I set the confreg to 0x2102 from rommon and booted the new image; however the 1841 now hangs indefinitely after printing the IOS export control banner. I have tried four other images, all with the same results. What is wrong with this router? UPDATE 1: I tried loading images from a FAT16-formatted USB, but this didn't work either. I also tried tftpdnld from rommon, but got a get_mac_address(): Search T_IDPROM_MACADDR (0xc3) failed Illegal MAC address. error and the file would not load.

  Read the article

• Configuring and managing Windows web server

  - by Mike C.

  Hello, I run a few websites and I was thinking of paying for a dedicated Windows web server from GoDaddy instead of paying for each site's hosting individually. I know enough about IIS to configure the Host Header and stuff like that, but I'm a little fuzzy about the email portion of the hosting. I have a few questions: Do I need to install an SMTP server on the web server to allow for emails to be sent/received to a website email address? Or is there another approach that I'm unaware of? Are there tools that monitor the amount of bandwidth used by the server? GoDaddy charges for bandwidth and I want to make sure I don't go over. Am I opening a can of worms that I don't really want to open by going the dedicated server route? Things like server updates, security, etc? Thanks!

  Read the article

• Setting up Dynamic DNS for Wireless Cameras And Accessing them Remotely

  - by Mike Szp.

  I've been trying to set up two TP LINK wireless N cameras that I bought so that I can see them remotely. I've set it up so that each has it's own ip address (192...105/192...106) and I can access them if I type that into the browser of a local computer The thing is that I don't know how to access them from another remote PC. My current setup is a a each camera connected to the router which then connects to the modem. When I set up the Dynamic DNS, and I access the "webpage" for my IP through a remote computer, it just goes to the configuration page of the modem. I have no idea how to make it go to the router or to the cameras. the router has its own ip range of 192.168.1.x while the modem has 192.168.2.x To access the cameras I type into the web browser: 192.168.1.114:100 on the local computer but I have no idea how to get there through the webpage of my Dynamic DNS remotely.

  Read the article

• IIS FTP Server works locally, but cannot connect from remote

  - by Mike Christensen

  I'm trying to setup an FTP server on Windows 2008 Server. I can connect locally: C:\>ftp localhost Connected to WebHead1 220 Microsoft FTP Service However, when I try to connect from remote, it doesn't work: ~>ftp x.x.x.x ftp: Can't connect to `x.x.x.x': Operation timed out ftp: Can't connect to `x.x.x.x' I've tried everything I can think of with the settings. The FTP server is bound to all unassigned IPs and listening on port 21. I've also checked "FTP Server" in the firewall settings. Nothing appears in the FTP log files. I'm totally out of ideas!

  Read the article

• Roundcube access from outside local network

  - by Mike K

  I have setup hmailserver on a windows xp pro computer and everything is working great when it comes to getting it to send and receive email. Now here is where my problem comes in... I have setup roundcube using uniserver and everything works great internally. Now, what I am trying to do is to be able to access roundcube from the internet outside of the local network. I have opened up ports 80, 443, and the mysql port yet I am still unable to access this from outside of the network. The error message that I am getting is as followed: Forbidden You don't have permission to access /webmail/ on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request. I believe something needs to be edited in the apache config file. Any help would be greatly appreciated. I am hoping I dont need to run this on windows server but I'm kinda losing hope and thinking I will need to because I need IIS.

  Read the article

• No sound (USB speakers) in Ubuntu 9.04 Jaunty Jackalope

  - by Mike

  I just installed Ubuntu 9.04 and have been unable to get sound functioning. I have a set of USB speakers (not USB powered with a stereo plug... they are totally USB). I've tried plugging them directly into the tower as well as into the USB port on my Dell 2405FPW monitor. Both USB ports are functioning correctly (I tested by sticking a flash drive in there - they both read it), and the speakers are functioning correctly in Windows. If it's relevant, I have an SB Audigy 2 sound card that came with the computer, but is not being used. Any ideas? Thanks! EDIT: These are the speakers - Logitech S-150 USB Speakers

  Read the article

• How could Google Latitude find my exact PC location with no GPS or public wifi?

  - by Mike

  I found a similar question here but I still don't get it. You see, I live in a small town and every time I check my IP location via online services or speed test websites, my location appears to be my ISP server location (which in my case is 250 miles away). But when I tried Google latitude, it pinpointed my exact location within less than 100 meters! I use Windows Vista, Google Chrome, and when I got the message that "Google is trying to locate you", I agreed just to check what the result will be. It was scary, very scary! What I've come up after reading the above link is that Google have a kind of extensive WiFi database locations. That could be understandable with the case of public and open WiFis that are used with a lot of people. Some of them might be using applications that could gather location data and somehow this information ends up in giant Google databases. From those, Google could pinpoint a WiFi location based on its MAC address along with these bits of info that have been gathered via various sources. The issue here is that my WiFi is private, I don't even broadcast my WiFi name. So how on earth did Google find my exact PC location? Please break down the answer in layman's terms as possible.

  Read the article

• Reboot fails with "Invalid partition"

  - by Mike Clark

  My laptop can't reboot. Any time something restarts the laptop (e.g. to apply Windows updates, or Start Menu-Restart, etc), the computer sits at a black screen with the message "Invalid partition" displayed in console text. When this happens, I power off the computer, then power it back on, and it boots up fine. OK, now the history behind this: This laptop is a new Dell. The day I got it, I used gparted to reclaim 30 GB of disk space that had been allocated to a "recovery partition" in the middle of the laptop's primary drive. (I have DVDs for recovery and I didn't want to waste 30 GB of SSD space on recovery data.) So I used gparted to delete the recovery partition and resize the primary Windows partition to use up the new free space. As expected when resizing a boot partition, the computer would no longer boot. I used Windows Recovery Console to fix the boot process: FIXMBR C: FIXBOOT C: BOOTCFG /rebuild This worked fine and the computer boots up fine. But, as mentioned earlier, the laptop still can't reboot. Any idea on how to fix this without completely reformatting the disk and reinstalling Windows from scratch? It's Windows 7.

  Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >