Search Results

Search found 19412 results on 777 pages for 'multiple resultsets'.

Page 32/777 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

  • Triple monitor setup with an ATI Radeon 4200?

    - by Ben Clapp
    I have a relatively new Powerspec computer (i5 quad core processor, about a year or two old) and just grabbed a new relatively inexpensive ($40?) graphics card. It has 1 DVI, one VGA, and one HDMI output. I have two (different type) monitors plugged into the DVI and VGA slots, and they work great. However, I cannot seem to be able to get a third monitor in the HDMI slot to work. I can see the monitor (and monitor info) show up in display settings. However, if I try to switch the monitor to 'on' and click apply, nothing happens. Anyone have the slightest idea what the problem might be? (It's a Radeon graphics card FYI; if I remember right I think it was the Radeon 4200?)

    Read the article

  • How to select display to record in recordmydesktop

    - by Tom
    I have a dual monitor setup and wish to only record the 1st monitor with recordmydesktop, but I am unsure of the settings when doing it via the command line, so far I have this: recordmydesktop --display=1 --width=1920 height=1080 --fps=15 --no-sound --delay=10 But I get this error message: Cannot connect to X server 1 How do I find the right X server to connect to and are the rest of my settings correct? I'm using 11.04, cheers.

    Read the article

  • How to use MythBuntu to send TV signal to a 2nd frontend

    - by Mark Preston
    I guess the a MythTV or MythBuntu backend acts as a "server" for the frontends. I have MythBuntu installed. It runs fine, I can tune live TV, hear the sound, etc. To get this to work, I had to config the Wired Network IP4V settings to Method: Link-Local Only. The Local Backend IP address is: 127.0.0.1 and the info (bottom of screen) says that if there is another frontend, that this IP add. must be changed. 1 - Does this mean changed to the IP address of the 2nd frontend? 2 - What "Method" do I use to make 2 or more frontends? 3 - I have an ethernet switch which currently "sees" the tv signal, sends it to the computer's ethernet port where Mythbuntu makes use of it. 4 - How do I set up the Myth to send it's output (the tv shows) to both televisions? If you know of a How-To, or website, please give the URL or identifying keywords.

    Read the article

  • Second monitor not detected

    - by configurator
    Note: I've seen this question quite a lot, but in all the cases I could find with answers, the answer was either "I don't know" or "use nvidia-settings (which is irrelevant to me)." I'm using Intel Sandybridge Desktop graphics, with a P8H61-M LE motherboard. How do I get Ubuntu to detect my second monitor? Clicking "Detect Displays" here doesn't do anything. Here's some system info: $ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) $ uname -a Linux clyde 3.5.0-13-generic #13-Ubuntu SMP Tue Aug 28 08:31:47 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux $ hardinfo [copied from the UI] -Display- Resolution : 1920x1080 pixels Vendor : The X.Org Foundation Version : 1.12.3 -Monitors- Monitor 0 : 1920x1080 pixels -Extensions- BIG-REQUESTS Composite DAMAGE DOUBLE-BUFFER DPMS DRI2 GLX Generic Event Extension MIT-SCREEN-SAVER MIT-SHM RANDR RECORD RENDER SECURITY SGI-GLX SHAPE SYNC X-Resource XC-MISC XFIXES XFree86-DGA XFree86-VidModeExtension XINERAMA XInputExtension XKEYBOARD XTEST XVideo -OpenGL- Vendor : Intel Open Source Technology Center Renderer : Mesa DRI Intel(R) Sandybridge Desktop Version : 3.0 Mesa 8.1-devel Direct Rendering : Yes I've tried upgrading everything from ppa:xorg-edgers/ppa and ppa:glasen/intel-driver. I've also installed various tools I've found in other threads (e.g. hardinfo) but they weren't really helpful to me as I don't know what to make of the data. How do I get Ubuntu to detect my second monitor?

    Read the article

  • Does an onboard video affect the X windows configuration?

    - by Timothy
    Does the onboard video on the motherboard affect the X windows configuration? My system has onboard and pcie video. The onboard video is a NVIDIA GeForce 7025 GPU, On Board Graphic Max. Memory Share Up to 512MB(Under OS By Turbo Cache). I have a pcie dual head video card installed with two monitors. The video card is a GeForce 8400 GS, with 512mb memory. When installing Ubuntu 12.04, only one monitor worked. When pulling up system settings- Displays it shows a laptop. This is a desktop pc. I did get both monitors to work using nvidia using twinview -- A complicated process! When checking nvidia now it shows the monitors disabled. The Nvidia X server setting does show the GPU and all the information. I was thinking it's seeing the onboard video on the motherboard. Why else would it show laptop?

    Read the article

  • ATI (fglrx) Dual monitor / laptop hot-plugging

    - by Brendan Piater
    I feel like I've gone back 5 years on my desktop today. I'll try not dump to much frustration here... I been running 12.04 since alpha with the ATI open source drivers and the gnome 3 desktop. I been generally very happy with them with only small issues along the way. Now of course it does not support 3D acceleration 100%, so games like my newly purchased Amnesia from the Humble bundle would not play. OK, no worries, the ATI driver is in the repos so let me have a go I thought. With all this testing that's been done with multi-monitor support, what could go wrong...? How I use my computer: It's laptop, with a HD 3670 card in it. I spend about 50% of the time working directly on the laptop (at home) and about 50% of the time working with an additional display connected (at work), multi desktop environment. What happening now: installed drivers things seemed to working, save some small other bugs (not critical) this morning I take my machine and plug the additional monitor into it, and nothing happens... ok fine. open "displays" try configure dual display, won't work open ati config "thing" (cause it is a thing, a crap thing) and set-up monitors there reboot it says (oh ffs, really.... ok) reboot, login and wow, I got a gnome 2 desktop (presume gnome 3 fall back) and no multi-monitor...great. (screenshot: http://ubuntuone.com/5tFe3QNFsTSIGvUSVLsyL7 ) after getting into a situation where I had to Ctrl + Alt + Del to get out of a frozen display, I eventually manage to set-up a single display desktop on the "main" monitor ok.. time to go home... unplug monitor... nothing happens.. oh boy here we go... try displays again, nothing, just hangs the display.. great. crash all the apps and reboot... So it's been a trying day... What I really hope is that someone else has figured out how to avoid this PAIN. Please help with a solution that: allows me run fglrx (so I can run the games I want) allows me to hot-plug a monitor to my laptop and remove it again allows me to change the display so include the hot-plugged monitor (preferable automatically like it did with the open drivers) Next best if that's not possible: switch between laptop only display and monitor only display easily (i.e. not having to reboot/logout/suspened etc) Really appreciate the time of anyone that has a solution. Thanks in advance. Regards Brendan PS: I guess I should file a bug about this too, so some direction as to the best place to file this would be appreciated too.

    Read the article

  • double screen in ubuntu 12.04?

    - by johan
    I am using ubuntu 12.04 and my video card is ATI Radeon 5000. I cannot use double screen (extended version). I get this error The selected configuration for displays could not be applied requested position/size for CRTC 148 is outside the allowed limit: position=(1280, 0), size=(1280, 768), maximum=(1440, 1440) I tried all display settings but it does not work. Some outputs from the system settings: root@ubuntu:~# lshw -C display *-display description: VGA compatible controller product: Madison [Radeon HD 5000M Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:46 memory:e0000000-efffffff memory:f0020000-f003ffff ioport:d000(size=256) memory:f0000000-f001ffff root@ubuntu:~# aticonfig --initial Uninitialised file found, configuring. Using /etc/X11/xorg.conf Saving back-up to /etc/X11/xorg.conf.original-0 root@ubuntu:~# cat /etc/X11/xorg.conf Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection I would appreciate any suggestions how to solve the problem. Thank you

    Read the article

  • Force gdm login screen to the primary monitor

    - by Kirill
    I have two monitors attached to my video card. Primary monitor has a resolution equal to 1280x1024 and the second has 1920x1200. My gdm login screen always appears on the second monitor even if it is switched off. My question is how to force gdm to show the login screen always on the primary monitor with resolution 1280x1024? I use Nvidia GT9500 videcard in Twinview mode. I can't use Xinerama because vpdau doesn't work correclty in this mode. What I have found is that mouse pointer always appears in the center of union of the screens and center is always on the monitor with higher resolution. Login screen always shows where mouse cursor is. Now my primary monitor has a resolution equal to 1920x1080. The problem still persists, mouse cursor always appears in the right-bottom corner of the second monitor.

    Read the article

  • Upgrade won't allow second display to go to 1920x1080

    - by Rick
    I just upgraded to 10.10 last night and I'm having issues now with dual display from my laptop dock. This was working in the previous release with a manual xrandr command: xrandr --output LVDS1 --off --output DP1 --mode 1920x1080 && xrandr --output VGA1 --mode 1920x1080 --left-of DP1 When I run this now, the DP1 output doesn't have a mode for 1920x1080. The two displays are a matched pair of dell 22" that are both 1920x1080. When I attempt to manually add the mode xrandr --addmode DP1 1920x1080 and rerun my command, I lose both displays altogether. I have to then blindly reset to just one of them in order to get display back. If I avoid the 1920 and just attempt to setup DP1 at the 1280x1024 max it thinks it has, then the second display will come up, but obviously looks horrible since it's non-native resolution. I've grabbed the updated xorg intel driver from the stable X ppa and am running: 2:2.13.901-2ubuntu2~xup~maverick xrandr output Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 VGA1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0*+ 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 LVDS1 connected (normal left inverted right x axis y axis) 1280x800 60.2 + 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 HDMI1 disconnected (normal left inverted right x axis y axis) DP1 connected (normal left inverted right x axis y axis) 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1

    Read the article

  • HDMI video output not working for external monitor

    - by user291852
    I have installed from scratch ubuntu GNOME 14.04 with gnome-flashback on my old HP HDX 16 laptop (core 2 duo p8600 + nvidia GT9600M + 4GB of ram) and I have problems with the HDMI output (I use it to extend my desktop on a dell U2412M 1920x1200 monitor). In the following I summarize the configurations that I have tried: Using the open source nouveau drivers, only the laptop monitor works, no signal from the external monitor connected to the HDMI output. However, the output of the xrandr command show that the HDMI output is connected with the correct resolution 1920x1200 (I find this thing really weird). Nouveau drivers with VGA connection works without problems on the external monitor, but the image is blurry compared to the HDMI connection. Using the nvidia drivers (I have tried different versions: nvidia-331-updates and the xorg-edgers versions nvidia-334 and nvidia-337) the HDMI output works, but I have system instabilities, random crashes and display freezes. I can't even enter in terminal mode with ctrl-alt-f1, so I have to manually shut down the laptop with the power button. I really would like to use the HDMI output with the nouveau drivers to avoid the system instabilities that I experienced with the nvidia drivers, but I can't figure out how to make it works. Alessandro

    Read the article

  • SQL SERVER – Grouping by Multiple Columns to Single Column as A String

    - by pinaldave
    One of the most common questions I receive in email is how to group multiple column data in comma separate values in a single row grouping by another column. I have previously blogged about it in following two blog posts. However, both aren’t addressing the following exact problem. Comma Separated Values (CSV) from Table Column Comma Separated Values (CSV) from Table Column – Part 2 The question comes in many different formats but in following image I am demonstrating the same question in simple words. This is the most popular question on my Facebook page as well. (Example) Here is the sample script to build the sample dataset. CREATE TABLE TestTable (ID INT, Col VARCHAR(4)) GO INSERT INTO TestTable (ID, Col) SELECT 1, 'A' UNION ALL SELECT 1, 'B' UNION ALL SELECT 1, 'C' UNION ALL SELECT 2, 'A' UNION ALL SELECT 2, 'B' UNION ALL SELECT 2, 'C' UNION ALL SELECT 2, 'D' UNION ALL SELECT 2, 'E' GO SELECT * FROM TestTable GO Here is the solution which will build an answer to the above question. -- Get CSV values SELECT t.ID, STUFF( (SELECT ',' + s.Col FROM TestTable s WHERE s.ID = t.ID FOR XML PATH('')),1,1,'') AS CSV FROM TestTable AS t GROUP BY t.ID GO I hope this is an easy solution. I am going to point to this blog post in the future for all the similar questions. Final Clean Up Act -- Clean up DROP TABLE TestTable GO Here is the question back to you - Is there any better way to write above script? Please leave a comment and I will write a separate blog post with due credit. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: SQL XML

    Read the article

  • Unity doesn't autostart on second X screen

    - by Nonoo
    I have two Nvidia cards both with 2 heads and both configured as TwinView, so I have Screen0 and Screen1 in my xorg.conf. ccsm sees both screens (displays them in the Screens drop-down at the top left), but Unity starts only on Screen0 by default. The displays on Screen1 only show the default white screen and default X mouse cursor, when I hover over them. Is this the normal, expected behavior? Can I start Unity on Screen1 automatically without running custom shell scripts (like DISPLAY=:0.1 compiz --replace)?

    Read the article

  • Ubuntu Dual Screen Using Virtual Machine - AMD GPU

    - by Chris
    I've been searching online and reading tutorials and etc about how to make my ubuntu VM dual screen(x86_64). I have first tried to run these commands: sudo aticonfig --initial -f which gave me the ouput of: sudo: aitconfig: command not found I then googled the output and followed these instructions that I tells me to install my ATI drivers onto my ubuntu. wget http://www2.ati.com/drivers/linux/ati-driver-installer-11-5-x86.x86_64.run sudo sh ati-driver-installer-11-5-x86.x86_64.run --buildpkg Ubuntu/natty sudo dpkg -i *.deb sudo apt-get -f install sudo aticonfig -f --initial --adapter=all sudo reboot It all works well until I input sudo apt-get -f install which gives me the following output: sudo apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 25 not upgraded. 3 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up fglrx (2:8.850-0ubuntu1) ... update-alternatives: error: alternative link /usr/bin/aticonfig is already managed by x86_64-linux-gnu_gl_conf. dpkg: error processing fglrx (--configure): subprocess installed post-installation script returned error exit status 2 dpkg: dependency problems prevent configuration of fglrx-amdcccle: fglrx-amdcccle depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-amdcccle (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx-dev: fglrx-dev depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-dev (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: fglrx fglrx-amdcccle fglrx-dev E: Sub-process /usr/bin/dpkg returned an error code (1) At this point, I don't know what to do since running: gksudo amdcccle For the record, I have 3D acceleration turned on. The following is my GPU for my VM lspci | grep VGA 00:02.0 VGA compatible controller: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter Any Help on how I can make my VM dual screen with Ubuntu would be great. Thank you in advance.

    Read the article

  • Jupiter seems to break multimonitor setup

    - by Philippe
    If Jupiter is in the startup my multimonitor setup will fail. Instead of two separate desktops the monitors will be mirrored, one over the other with the smaller notebook-desktop in the larger screen: After each new log-in I have to reset the Display settings in the "System Settings..." dialogue to two not mirrored screens, the changes don't seem to be saved. Given the the entry from xsession-errors /usr/lib/jupiter/scripts/resolutions: line 42: /var/jupiter/available_resolutions_LVDS: Permission denied I assumed that it's coming from Jupiter. Infact, if Jupiter is removed as startup application the desktop settings are fine. Any idea how to solve that issue?

    Read the article

  • How to have many Ubuntu workstations centrally managed?

    - by Richard Zak
    I have about a dozen Alienware workstations that are used for CUDA development and for execution of MPI jobs. What is the best way to manage them? I'd like to have something like an apt-get but for several systems, and a way to reimage a system simply and centrally. It seems that a combination of Landscape and Canonical's MAAS would be a good fit, but I need an open source solution. Any thoughts?

    Read the article

  • runt integrated intel graphics card + nvidia pcie graphics card?

    - by Roberto
    Its days I am searching for information/help. Is this possible at all? I am running Ubuntu 11.10 on an intel core i3 530 on a intel dh55hc mainboard. I have 2 monitors attached, one on dvi and one on hdmi. I want to ad a third or eaven a fourth monitor using an additional graphics card nvidia in pcie slot. I cant get an image on all monitors at the same time. I am wondering if this is possible at all? Any ideas where I can get information about this? Thanks in advance Roberto

    Read the article

  • Dual monitor in Ubuntu 12.04 + Nvidia GPU with CUDA drivers?

    - by Aphex
    I'm thinking about setting up dual monitors on my desktop PC, running Ubuntu 12.04 with a Nvidia GTX 570. I use the GPU for CUDA programming so it's set up with the CUDA drivers. Is it possible/easy to set up dual monitors with this configuration? The only questions I saw related to this were for GPUs without cuda drivers. If anyone knows how dual monitors work with CUDA drivers, it would be much appreciated. It was enough of a pain getting everything running with the GPU and CUDA in the first place, I'd hate to ruin it all by attempting dual monitors.

    Read the article

  • Display settings changes automatically with dual monitors in 12.04 and 12.10 AMD

    - by Johan Hovda
    Dual monitors works fine, except that the settings suddenly change. This happens very often, sometimes several times in a few minutes. It is very irritating having to set the settings again each time. Suddenly mirroring is set to on, sometimes the monitor switch places (from left to right and so on), and most of the times the screen resolutions are also changed. I use Gnome Shell. I have tried unity with the same result. I use an open driver. I have earlier used fglrx, with some better results (still happens, but not so often), but can't install it sucsessfully after upgrading to ubuntu 12.10. I know there is a similar question about this issue, but it's not answered. I hope someone can help me.

    Read the article

  • ATI Catalyst doesn't retain changes after reboot when setting extended display

    - by rfc1484
    I have Ubuntu 11.10 and I'm trying to set up extended display for my two displays. I have an AMD 6870. fglrx and fglrx-updates are installed. When I launch amdcccle trough the terminal (using sudo), I select in tab "Multi-Display" the option "Multi-display Desktop with Display(s)". Then it says for changes to be done I have to reboot my computer. Being a good an obedient lad I do just that, but after rebooting the displays are still in the same "clone" option as before in the Catalyst Control Center and no changes are made. Any suggestions?

    Read the article

  • Force gdm login screen to the primary monitor

    - by Kirill
    I have two monitors attached to my video card. Primary monitor has a resolution equal to 1280x1024 and the second has 1920x1200. My gdm login screen always appears on the second monitor even if it is switched off. My question is how to force gdm to show the login screen always on the primary monitor with resolution 1280x1024? I use Nvidia GT9500 videcard in Twinview mode. I can't use Xinerama because vpdau doesn't work correclty in this mode.

    Read the article

  • Turn off laptop display and have monitor

    - by Ryan B
    My laptop display has stopped working and is unfixable! Anyway, I got a full HD monitor and plugged that into the HDMI port of the laptop. I have changed the power settings so that I can close the lid and still have the monitor on, and this all works. However because it is on "mirror displays", I cannot get the full 1080p resolution that the monitor supports, and when I turn off mirror displays and switch off the laptop screen, the monitor will also switch off! I'm really stuck, as I can only get the monitor to display its full resolution if I have it with the laptop screen turned on, and I dont want this because (as the laptop display does not work) things get lost on that side of the screen. HELP. (Dell Studio 1537 Monitor is Samsung SA300 Connected through HDMI Ubuntu 11.10)

    Read the article

  • Remove Duplicate Second Unity Launcher on Dual Screen

    - by Eugene van der Merwe
    See attached image. On my dual screen display I have a Unity Launcher on the left hand screen and also on the right hand screen. Both work perfectly fine. I don't want two Unity Launchers. Every time I move my house to the right hand side it gets slowed down over the right launcher hampering my productivity. I have an Nvidia card with the Nvidia driver and I am using TwinView. Could somebody please tell me how to remove this extra duplicated launcher?

    Read the article

  • How to make "xrandr" work with GMA500?

    - by Nwbie
    Is it error at driver of graphic chip or Xorg or kernel? I am Asus T91mt with GMA500, Ubuntu 12.04.1. I would like too see only a notice of connection at least. A log of xrandr: $ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation System Corporation System Controller Hub (SCH Poulcbo) Graphics Controller (rev 07) vp@vc:~$ xrandr --verbose xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 600, current 1024 x 600, maximum 1024 x 600 default connected 1024x600+0+0 (0x138) normal (normal) 0mm x 0mm Identifier: 0x137 Timestamp: 26863 Subpixel: unknown Clones: CRTC: 0 CRTCs: 0 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: 1024x600 (0x138) 0.0MHz *current h: width 1024 start 0 end 0 total 1024 skew 0 clock 0.0KHz v: height 600 start 0 end 0 total 600 clock 0.0Hz vp@vc:~$ xrandr --prop xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 600, current 1024 x 600, maximum 1024 x 600 default connected 1024x600+0+0 0mm x 0mm 1024x600 0.0* vp@vc:~$ Please help, i am linux newbie and i am tired ;/

    Read the article

  • Maximized Office 2007 gets cut off on multi-monitor setup with different resolutions

    - by Adam M-W
    I've got an external monitor plugged into my laptop that I like to use for typing up documents, but I've noticed that when Word is maximized it gets cut off at where the primary monitor's bounds are. Is this a bug in Wine (i'm using version 1.3.32), or with my Window Manager (metacity with compositing enabled, version 2.34.1), with my graphics drivers (nouveau) or something else? I know that I can fix it by unmaximizing (it doesn't get cut off and I can resize to the entirety of the second monitor), but it keeps on maximizing itself as it (rightly so) knows that it should be taking up the entire screen. I don't really want to use the "Emulate a virtual desktop feature", I would prefer to find the source of this issue.

    Read the article

  • .com vs .me for personal and blogging sites. Which one is good regarding seo

    - by Sameer Manas
    I basically have a domain under my name with .com extension. I am planning to use it for my portfolio and also as a regular blog. Now considering SEO and ranking stuff, what is the best way to implement this. myname.com - Portfolio || myname.com/blog - Blog page (or) myname.com - Blog || myname.me - Portfolio i have absolutely no idea on how .tld's impact SEO and Ranking, so i seek the experts advice on this. Thanks in advance.

    Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >