Search Results

Search found 11228 results on 450 pages for 'pen drive'.

Page 32/450 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

  • Why is writing to my external hard drive slow, while benchmarks show fast writing?

    - by matix2267
    I have an iOmega eGo 320GB portable drive connected through USB2.0 to my laptop running Windows Vista. It's been working fine for quite some time until recently it became very slow when writing e.g. when copying ~300MB movie over to the drive at first it is extremely fast but it actually doesn't write it only puts in cache and then hangs on last 10-20MBs for about a minute. When copying larger files it's the same story: starts fast but then slows down to ~5MB/s (sometimes even slower down to 2MB/s). Strange thing is that I have always had caching disabled for this drive (it was disabled by default and I never bothered changing it). At first I thought that the disk is dying so I checked S.M.A.R.T. values and everything is fine there. I also run chkdsk and it seemed to fix the problem - it worked fast for a few minutes but then it slowed down again. I also tried plugging it into another USB port - no difference. Additionally I noticed that reading under certain circumstances is sometimes slower e.g. loading times for some games are ~10 times longer, whereas simple copying files from this drive to my internal HDD is fast. I ran a speed benchmark using CrystalDiskMark with a 5x100MB run and strangely got these results: read write (MB/s) Seq 33.05 28.25 512k 17.30 15.27 4k 0.267 0.372 4kQD32 0.510 0.260 This is different from what most other people have (I've found many threads about slow disk write while googling but all of them were slow on benchmarks too) which is why I decided to post this problem here. BTW most of the time when writing (or sometimes reading) the activity led is mostly idle (blinks a while and then stops for longer, sometimes has slower blinks ~1 sek, sometimes goes off for a few seconds - extremely long blink :) ) but when benchmarking, defragmenting or just reading (copying from this drive, installing apps from installers there, watching HD videos) it is blinking really fast (like it should) and there are no slowdowns. It shouldn't be driver issue unless stock Windows drivers have some issues I'm not aware of.

    Read the article

  • Is a computer's DRAM size not as important once we get a Solid State Drive?

    - by Jian Lin
    I am thinking of getting a Dell X11 netbook, and it can go up to 8GB of DRAM, together with a 256GB Solid State Drive. So in that case, it can handle quite a bit of Virtual PC running Linux, and Win XP, etc. But is the 8GB of RAM not so important any more? Won't 2GB or 4GB be quite good if a Solid State Drive is used? I think the most worrying thing is that the memory is not enough and the less often used data is swapped to the pagefile on hard disk and it will become really slow, but with an SSD drive, the problem is a lot less of a concern? Is there a comparison as to, if DRAM speed is n, then SSD drive speed is how many n and hard disk speed is how many n just as a ball park comparison?

    Read the article

  • What's a fast way to copy a lot of files from an internal hard-drive to external (USB) storage?

    - by jonathanconway
    I have a large amount of data - about 500 GB - on the internal hard drive of a desktop PC. This includes music, videos, PDFs... you name it. I want to copy everything to an external USB hard drive (1.5 tb capacity). The desktop PC runs Ubuntu. To being with, I simply plugged in and mounted the hard drive and dragged the top-level folder onto the drive. It's started copying, but it seems to be proceeding very slowly. About 10 minutes later and it's only done about 500 MB. I'm sure this is slower than what I could achieve with less total data. So I'm wondering if there's a quicker way of doing this. Would it be better to copy it in portions of 500MB or so, rather than all at once?

    Read the article

  • Mac failing (failed?) hard drive - is all hope lost?

    - by Daniel
    It's a 500 GB Seagate laptop hard drive that came with my Macbook Pro. Apple partition format. Already replaced and now have it external, connected via SATA/USB adapter. Trying to get just a few files that I worked on while out of town when it crashed (and thus did not have my time machine backup drive). Drive will not mount, but OS X Disk Utility detects it and can read the capacity, model number, and even the name of the partition, which leads me to believe all hope may not be lost. Failed attempts so far: Disk Utility verify+repair says drive cannot be repaired and that I should back up immediately (lovely) Disk Warrior says it cannot rebuild the directory due to hardware failure Data Rescue quick & deep scans immediately failed PhotoRec says "error reading sector" for every sector (at least for the few minutes I let it run before closing it to explore other options) What else can I try here? Again, I'm just looking for a few, small files (python scripts to be specific) - not a full recovery.

    Read the article

  • What could be wrong with my CD drive and how do you fix it?

    - by Jamie
    My CD drive hasn't worked in about 8 months. I was burning CDs in a hurry and pulled it out because it was taking too long (probably an average amount of time). Im running a laptop (Toshiba Satellite A505-6965) that uses a slot drive. Now my computer doesn't accept CDs. It used to pull them in but it doesn't anymore. Ive heard it make odd noises a few times but thats it. The slot is these spongey things and Ive managed to peek into the drive with a flashlight and theres nothing in the way, really. Could someone explain the mechanics of what happened and if it would be possible to fix it? If itd be possible to fix it through Linux that would be great since I keep getting the BSOD (0x0000007B) and am going to try reinstalling Windows 7. But I can't really do that since I don't have a USB drive larger than 2 GB (Windows is about 4 GB) so Im relying on Linux ATM.

    Read the article

  • Should I use VFAT or ext3 for a 1Tb external usb hard drive?

    - by ihuston
    I have a 1 Tb USB external hard drive which I want to use to backup data from my home and office desktops (both running Linux). Should I format the drive (possibly split into a few partitions) as vfat or ext3? I don't anticipate using the drive with Windows very often so this is not a primary concern. The main thing holding me back from just using ext3 is the problems you can have when two different users (home and work accounts) try to access each others data. Is there any way to mount an ext3 drive with user id mapping?

    Read the article

  • Make a drive from one machine appear as a physical disk in another machine.

    - by Roberto Sebestyen
    I want to take a physical disk (or part of a disk) in one machine (call it machine-A) and I want to make it available in another machine (machine-B). But I don't want to map a network drive. I want it to appear in machine-B as a physical drive. Even though it is not a physical drive. The reason I want to do this is i want the ability to create shares in machine-B on that drive. Since I cannot do that on mapped drives, I need to use some utility that fools machine-B to think that it is a physical drive, and treat it as such. Both of these machines are windows server 2003. I heard about NFS, It sounds like what could be the solution to my problem. But isn't that a Linux/Unix protocol? What tools can I use to make this happen? Are there any open source solutions? I don't care what the solution is, as long as it achieves the end result, preferably open source solution though. Thanks for reading guys and gals!

    Read the article

  • Viruses on external hard drive -- how to clean files?

    - by Jade
    Last year my Dell laptop caught some pretty nasty viruses; I saved all my important stuff on an external hard drive. In an unrelated turn of events, I replaced my Dell with a Mac and have been able to retrieve data from the hard drive without trouble. The problem is, I'm sure the hard drive has a few lingering viruses and I really don't want to infect any more PCs with it. I was planning to reformat it anyway, but I'd like to be able to save my files. Would transferring those files to my Mac and then scanning them for Windows viruses before throwing them back onto the newly reformatted hard drive be enough?

    Read the article

  • Transfer hard-drive with windows XP to another computer. On booting, asks to activate xp

    - by Jesse
    I had an old computer sitting around that I have not been able to boot successfully. I moved the hard drive and placed it in my newer computer. If I boot linux, I can mount the XP hard-drive and access the files. If I try to boot from the XP hard-drive, it will boot, but it asks me to activate windows before proceeding. If I continue, I get the "activation window" with two images/icons(?) which are failing to load. Nothing else happens. The version of windows came with the original computer the hard-drive came from, so I'm not sure if I'm married to the broken computer (I hope not!). Is there anything I can do in order to boot into XP from the new computer?

    Read the article

  • What's the best tool to use to automatically backup selected folders from Windows to my external hard drive?

    - by PhD
    I have a 1TB external hard drive and I'd like to periodically schedule backups of my "Libraries" in Windows to the external drive. I'd prefer if it could detect what files have changed and periodically transfer them to the drive instead of I having to do it manually. Is there a way in Windows 7 to do this automatically? If not, what are some external tools (preferably free) that I can use for this? EDIT: I've used Windows back-up and I find it restrictive for detecting changes and backing up automatically. That's all that I'm aware of. My WD hard drive had something for this but the application doesn't work any more and it wasn't that good either. So, I wish to know what are my options.

    Read the article

  • Could replacing an old hard drive's circuit board make it work again?

    - by oscilatingcretin
    I have a 12-year-old, 10gb Maxtor drive that died on me around 7 years ago, but I have not had the heart to throw it away. When the computer powers on, it whirrs silently as it tries to spin up and then it stops. So, a few years ago, I sent it off for professional data recovery. They were able to retrieve quite a bit from it, but I know there's a bunch more there. It only cost $700, so I just chalked up the lackluster recovery effort to "you get what you pay for" considering that most companies will charge you several thousands of dollars for this kind of data recovery. When they sent the drive back, I couldn't help but plug it back in just to see if maybe they unjammed something in the process of disassembling/reassembling the drive. To my surprise, the drive had a much healthier spin-up sound and actually stayed spinning for several minutes before winding down to a halt. Windows is even able to detect and interact with the drive, but I get I/O errors after so many minutes of waiting for it to mount. Before I start doing stupid stuff with it like dropping it on the ground, freezing it, crapping on it, etc, I decided to buy the exact same model off Ebay so that I could swap the circuit boards as a last-ditch effort. While it's en route, I thought I'd come here to ask if this is even a worthwhile effort and, if even remotely so, what should I know before ripping off the old board and slapping on the new?

    Read the article

  • Make the recycle bin of the SSD on a RAID0 drive?

    - by Rolnik
    I don't know about you folks, but I hate the idea of junk sitting on my tiny 30GB SSD. Any way to designate another drive to be the host of the Recycle Bin for items formerly on the SSD? Basically, I need to know how to make a lower-priority drive receive the recycled materials from the 'main' drive, which happens to be short on space. The best thing I can think of is a batch file that a) syncs 'recycle' to another drive; and b) empties the recycle bin. ... but that's too much work for me.

    Read the article

  • My USB bootable thumb drive, no longer boots on a single particular computer on which it previously worked

    - by LiamMeron
    I created a bootable drive, booting CrunchBang, about 2 months ago. About a month ago, I booted into it on another laptop. After shutting down, I have been unable to get it to boot on my own laptop, despite having worked previously. I can still boot into it on my desktop, and can also boot into it on all other computers that I have tried. If I plug it in when I am running Ubuntu, the Home and / folders mount, the only error being that for some reason my PC likes to try and mount the swap partition too, which naturally, gives an error. The BIOS settings are all still setup to boot from USB. When I boot, all I get is a black screen with the white cursor, it will stay there for as long as I leave it. If it is worth anything, I have GRUB loader installed on the drive. The partitions look a little odd, but I am rather unfamiliar with how they are dealt with. The first partition, /, is sdb1 and has the bootable flag. The second partition is an extended system, and is sdb2. The third partition, according to GParted, seems to be nested under the second. This is the swap partition, and it is sdb5 The fourth partition is my home partition and is sdb6 and is also nested under the extended system. The first and fourth partitions are ext4. I don't know if that helps, but the more info, the better accuracy, generally. Thanks. EDIT: I tried reinstalling GRUB on the drive, but that didn't work. However, when I reinstalled GRUB on my laptop, I did it with my USB thumbdrive in. This caused the GRUB updater to find the /boot folder and add the proper details into my laptop's GRUB loader. I could log into CrunchBang from my laptop's GRUB but I was still unable to boot directly to the drive. It looked like my BIOS is unable to find the bootloader. I am unable to install GRUB to a partition I just created, a /boot partition at the start of the drive, GRUB just doesn't allow it. I think I'm going to have to reinstall #! on my drive, which won't be a great loss as I haven't put much time into it.

    Read the article

  • Windows 7 not detecting external hard drive but Ubuntu is detecting. Why?

    - by unlimit
    I have a 500 GB Toshiba external hard drive. Since yesterday Windows 7 stopped detecting it, however I do see it listed on the "Safely remove hardware and eject media" icon on the taskbar. Then I tried the same external hard drive on my Ubuntu and it detected it just fine. Ubuntu and Windows 7 are on the same laptop. I have dual boot. Can someone tell me why is it happening? Am I missing a driver in Windows 7? Additional info: This drive has worked perfectly fine in the past. I did not format this drive ever. It just stopped working yesterday in windows.

    Read the article

  • Trying to format drive fails

    - by david
    since I will be doing an internship for which i need to use Windows software, I have decided to ruin my day trying to remove my Ubuntu 12.04, install Win XP SP3 (since the DualBoot theme from ubuntu suggests to first install Windows and then Ubuntu, for problems with the bootloader if you do it the other way around) and then reinstall Ubuntu 12.04 since I would like to keep using it as my primary operating system, using WinXP exclusively for the internship. Other than that, I would like to have a partition for the data, which can be used by both Ubuntu and Windows. So now, I have used the disk utility run from an ubuntu-live cd to format my drive with Master Boot Record (being conscious of the fact that this way I will lose all my data, which I have saved on an external drive before, and that my Ubuntu won't work anymore afterwards), creating partitions for Windows (NTFS), personal data (FAT, since as far as I know both Ubuntu and Windows can deal with this), a Swap partition for Linux, and one partition for Ubuntu (ext4); trying to install Win XP from cd gives me a blue screen, which stops the setup and telling me to remove all recently installed drives and to run CHKDSK. So I thought, that maybe Windows doesn't like pre-partitioned drives for its installation and thus I need to re-format my hard drive in order to have a completely "new" drive, which I can then, during the Windows-installation, partition in order to create the partitions I need. Trying to do this, though, the disk-utility run from the live-CD gives me this warning: Error creating partition table: helper exited with exit code 1: In part_create_partition_table: device_file=/dev/sda, scheme=0 got it got disk committed to disk BLKRRPART ioctl failed for /dev/sda: Device or resource busy I do not understand why it tells me that the hard-drive is busy, because, as stated above, I am doing all this from a live-CD. Thus, my questions are: How can I resolve the error given by the disk utility? Does it make sense to use four partitions in the way mentioned above? And if not so, which partitions should I create? Can I, theoretically, partition my drive from an Ubuntu live-cd in order to create the partitions I want and to install first Windows and then Ubuntu? Thanks for any help, David

    Read the article

  • External USB Drive

    - by ErocM
    I have a server that I hooked up an external USB drive. It was formatted in windows and has files on it already. I'm new to Ubuntu so please be patient... I have two questions: Will Ubuntu see the drive since it was formatted in windows? How do I mount this drive or rather, how do I know it's seen by Ubuntu? Thanks! I did fdisk -l and this is what I have but I don't see it. It's a 1tb drive: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0001eb47 Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 625141759 312320001 5 Extended /dev/sda5 501760 625141759 312320000 8e Linux LVM Disk /dev/sdc: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sdc doesn't contain a valid partition table Disk /dev/sdb: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sdb doesn't contain a valid partition table Disk /dev/mapper/ubuntu-root: 316.6 GB, 316577677312 bytes 255 heads, 63 sectors/track, 38488 cylinders, total 618315776 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/ubuntu-root doesn't contain a valid partition table Disk /dev/mapper/ubuntu-swap_1: 3217 MB, 3217031168 bytes 255 heads, 63 sectors/track, 391 cylinders, total 6283264 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 this is an external USB hard drive not a thumb drive :)

    Read the article

  • Lubuntu Full Install on USB Drive with Full Disk Encryption and Grub2

    - by vivi
    I apologise for the wall of text, but I want you to scrutinize my thought-process to make sure there's no mistakes and no other way around it: I wish to have a full install of lubuntu with full disk encryption on one of my usb drives. The laptop I would be booting it from also has windows 7. I want to maintain that OS. From what I've read I must place grub2 on the usb drive so that: If I have the usb plugged in, the laptop would start lubuntu (having USB HD in the BIOS Boot options) If I don't have the usb plugged in, it would normally start windows 7. That's exactly what I want it to do. But: If I install from the normal .iso: Clicking "install lubuntu alongside them" would install it onto my normal HD. Clicking "Erase disk and install lunbuntu" would delete all the stuff I have in my HD and install lubuntu on it. Clicking "Something else" would allow me to choose to install lunbuntu and grub2 onto the usb drive, but would not provide it with encryption. So the normal .iso won't work for what I want. Then I found the alternate .iso and this tutorial: It allows me to install lubuntu with all the options I want and gives me the option to choose where to place the grub2! Hopefully there are no flaws in my train of thought. If there aren't, I have a few questions regarding that tutorial: The author says in his case choosing "Yes to install GRUB to your MBR" installed the grub to the usb drive's mbr. I can't have "in his case". I need to be sure that's what it will do, so that it doesn't mess up the windows boot loader. Choosing "no" would open this window and allow to choose where I want to install the grub. Unfortunately I don't understand which option I should type in the box to install it into the usb drive. Would removing my laptop's Hard Drive ensure that the grub is installed onto the usb drive if i picked first option, "yes"? I apologise once again for the wall of text and appreciate any help you guys can offer me.

    Read the article

  • How to simulate a USB drive

    - by rursw1
    Hi all, Is it possible to simulate a USB drive with software only? I mean, for example, to expose a local memory space to the OS so the device manager will recognize it as a USB device. I'm not familiar with hardware implementation, but I'm sure that it is possible somehow to emulate the USB protocol. I began with this book - USB Design By Example. Can anyone please give me additional references to begin with? Thank in advance!

    Read the article

  • copy files to nework path or Drive using python

    - by user218976
    hi , Mine is similar to this question. http://stackoverflow.com/questions/2042342/network-path-and-variables-in-python/2042376 The only difference is my network drive has a password protect with user name and password . I need to copy files to a samba share using python and verify it. if i manually login in then the code works but without logging in the shutil command does not work Thanks

    Read the article

  • Service not able to access a mapped drive.

    - by Rohit
    Hi All, I have read in many forums that mapped drives are not accessible from a service as no user is logged on. Question 1) I tried making my service as a log on - as some account and i had my network drive mapped in that very account. The service still cannot access it. Why? Question 2) From the same sevice, i invoke another process. Under what user account will the process run? Thanks

    Read the article

  • Can I programmatically find out if a drive is in use?

    - by Geo
    Is there any way of programmatically finding out if a mapped drive is currently in use? If I try to unmount the drive with net use, and the drive is being used, it will tell me that the drive is in use and prompt me to take further action. I'd like to be able to unmap drive automatically if it's no longer being used. The system is a Windows XP.

    Read the article

  • Is it possible to authenticate user manually with oauth2

    - by iixi
    I want to authenticate a user with oauth2 to access google drive. I can get the access token required when using AccountManager to retrieve an account and then get the token with: mgr.blockingGetAuthToken(account, ApiConst.DRIVE_AUTH_SCOPE, true); But I want the user to be able to authenticate by providing username and password instead of using the account added to the phone. Is this possible? EDIT So I have tried to implement the authorization in a WebView. I followed this example. I have extracted the code request parameter but the code used to retrieve the access token seems to be deprecated and not compatible with the packages used by Google Drive SDK. This is the code used to retrieve the access token in the example: AccessTokenResponse accessTokenResponse = new GoogleAuthorizationCodeGrant(new NetHttpTransport(), new JacksonFactory(), OAuth2ClientCredentials.CLIENT_ID, OAuth2ClientCredentials.CLIENT_SECRET, code, OAuth2ClientCredentials.REDIRECT_URI).execute(); Can this be done in some other way or should I just give up?

    Read the article

  • How do you limit root partition disk access to allow drive to go into stanby mode?

    - by Casey
    When there are no users on my system, I would like the hard disk to spindown to low-power state. I realize that this might not be 100% achievable for a straight 24 hours, but it seems reasonable that the system could remain idle for a few hours at a time when it is not in use. My system is headless and running a limited number of services. The primary services are: exim4, mythtv-backend, nfs, samba, cups, apt-cacher-ng Assume that drives are already enabled to go into standby mode. Also, its not acceptable to increase the write-back timeout, since my system is not on a UPS.

    Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >