Search Results

Search found 21053 results on 843 pages for 'process'.

Page 32/843 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

• Reliable file copy (move) process - mostly Unix/Linux

  - by mfinni

  Short story : We have a need for a rock-solid reliable file mover process. We have source directories that are often being written to that we need to move files from. The files come in pairs - a big binary, and a small XML index. We get a CTL file that defines these file bundles. There is a process that operates on the files once they are in the destination directory; that gets rid of them when it's done. Would rsync do the best job, or do we need to get more complex? Long story as follows : We have multiple sources to pull from : one set of directories are on a Windows machine (that does have Cygwin and an SSH daemon), and a whole pile of directories are on a set of SFTP servers (Most of these are also Windows.) Our destinations are a list of directories on AIX servers. We used to use a very reliable Perl script on the Windows/Cygwin machine when it was our only source. However, we're working on getting rid of that machine, and there are other sources now, the SFTP servers, that we cannot presently run our own scripts on. For security reasons, we can't run the copy jobs on our AIX servers - they have no access to the source servers. We currently have a homegrown Java program on a Linux machine that uses SFTP to pull from the various new SFTP source directories, copies to a local tmp directory, verifies that everything is present, then copies that to the AIX machines, and then deletes the files from the source. However, we're finding any number of bugs or poorly-handled error checking. None of us are Java experts, so fixing/improving this may be difficult. Concerns for us are: With a remote source (SFTP), will rsync leave alone any file still being written? Some of these files are large. From reading the docs, it seems like rysnc will be very good about not removing the source until the destination is reliably written. Does anyone have experience confirming or disproving this? Additional info We will be concerned about the ingestion process that operates on the files once they are in the destination directory. We don't want it operating on files while we are in the process of copying them; it waits until the small XML index file is present. Our current copy job are supposed to copy the XML file last. Sometimes the network has problems, sometimes the SFTP source servers crap out on us. Sometimes we typo the config files and a destination directory doesn't exist. We never want to lose a file due to this sort of error. We need good logs If you were presented with this, would you just script up some rsync? Or would you build or buy a tool, and if so, what would it be (or what technologies would it use?) I (and others on my team) are decent with Perl.

  Read the article

• new ActiveXObject('Word.Application') creates new winword.exe process when IE security does not allo

  - by Mark Ott

  We are using MS Word as a spell checker for a few fields on a private company web site, and when IE security settings are correct it works well. (Zone for the site set to Trusted, and trusted zone modified to allow control to run without prompting.) The script we are using creates a word object and closes it afterward. While the object exists, a winword.exe process runs, but it is destroyed when the word object is closed. If our site is not set in the trusted zone (Internet zone with default security level) the call that creates the word object fails as expected, but the winword.exe process is still created. I do not have any way to interact with this process in the script, so the process stays around until the user logs off (users have no way to manually destroy the process, and it wouldn't be a good solution even if they did.) The call that attempts to create the object is... try { oWordApplication = new ActiveXObject('Word.Application'); } catch(error) { // irrelevant code removed, described in comments.. // notify user spell check cannot be used // disable spell check option } So every time the page is loaded this code may be run again, creating yet another orphan winword.exe process. oWordApplication is, of course, undefined in the catch block. I would like to be able to detect the browser security settings beforehand, but I have done some searching on this and do not think that it is possible. Management here is happy with it as it is. As long as IE security is set correctly it works, and it works well for our purposes. (We may eventually look at other options for spell check functionality, but this was quick, inexpensive, and does everything we need it to do.) This last problem bugs me and I'd like to do something about it, but I'm out of ideas and I have other things that are more in need of my attention. Before I put it aside, I thought I'd ask for suggestions here...

  Read the article

• Bypassing confirmation prompt of an external process

  - by Alidad

  How can I convert this Perl code to Groovy? How to bypass confirmation prompts of an external process? I am trying to convert a Perl script to Groovy. The program is loading/delete maestro (job scheduling) jobs automatically. The problem is the delete command will prompt for confirmation (Y/N) on every single job that it finds. I tried the process execute in groovy but will stop at the prompts. The Perl script is writing bunch of Ys to the stream and print it to the handler( if I understood it correctly) to avoid stopping. I am wondering how to do the same thing in Groovy ? Or any other approach to execute a command and somehow write Y on every confirmation prompt. Perl Script: $maestrostring=""; while ($x < 1500) { $maestrostring .= "y\n"; $x++; } # delete the jobs open(MAESTRO_CMD, "|ssh mserver /bin/composer delete job=pserver#APPA@") print MAESTRO_CMD $maestrostring; close(MAESTRO_CMD); This is my groovy code so far: def deleteMaestroJobs (){ ... def commandSched ="ssh $maestro_server /bin/composer delete sched=$primary_server#$app_acronym$app_level@" def commandJobs ="ssh $maestro_server /bin/composer delete job=$primary_server#$app_acronym$app_level@" try { executeCommand commandJobs } catch (Exception ex ){ throw new Exception("Error executing the Maestro Composer [DELETE]") } try { executeCommand commandSched } catch (Exception ex ){ throw new Exception("Error executing the Maestro Composer [DELETE]") } } def executeCommand(command){ def process = command.execute() process.withWriter { writer -> 1500.times {writer.println 'Y' } } process.consumeProcessOutput(System.out, System.err) process.waitFor() }

  Read the article

• Windows Service doesn't start process with different credentials

  - by Marcus

  I have a Windows Service, running as a user, that should start several processes under different user credentials. I'm using the following code to start a process: Dim winProcess As New System.Diagnostics.Process With winProcess .StartInfo.Arguments = "some_args" .StartInfo.CreateNoWindow = True .StartInfo.ErrorDialog = False .StartInfo.FileName = "C:\TEMP\ProcessFromService\ProcessFromService\bin\Debug\ProcessFromService.exe" .StartInfo.UseShellExecute = False .StartInfo.WindowStyle = ProcessWindowStyle.Hidden 'Opgave WorkingDirectory kan soms tot problemen leiden, indien betreffende directory 'niet bereikbaar (rechten) is voor opgegeven gebruiker. 'Beter dus om deze niet op te geven. '.StartInfo.WorkingDirectory = My.Computer.FileSystem.SpecialDirectories.Temp .StartInfo.Domain = "" .StartInfo.UserName = "MyUserId" Dim strPassword As String = "MyPassword" Dim ssPassword As New Security.SecureString For Each chrPassword As Char In strPassword.ToCharArray ssPassword.AppendChar(chrPassword) Next .StartInfo.Password = ssPassword .Start() End With The process is correctly started when I use the same credentials as of which the Windows Service is running under. The process is not started, without any error, when I use different credentials. In other words: If the Windows Service is running as UserA then I can start a process running as UserA. If the Windows Service is running as UserB then I can not start a process running as UserA. I have created a test project in which I can reproduce this problem. If you put this project in C:\Temp then the used paths will be correct. You can download this test project here: https://dl.dropboxusercontent.com/u/5391091/ProcessFromService.zip NB: I hope this info is enough to explain it. If you need more info, please let me know and I will add it.

  Read the article

• Shared Memory and Process Sempahores (IPC)

  - by fsdfa

  This is an extract from Advanced Liniux Programming: Semaphores continue to exist even after all processes using them have terminated. The last process to use a semaphore set must explicitly remove it to ensure that the operating system does not run out of semaphores.To do so, invoke semctl with the semaphore identifier, the number of semaphores in the set, IPC_RMID as the third argument, and any union semun value as the fourth argument (which is ignored).The effective user ID of the calling process must match that of the semaphore’s allocator (or the caller must be root). Unlike shared memory segments, removing a semaphore set causes Linux to deallocate immediately. If a process allocate a shared memory, and many process use it and never set to delete it (with shmctl), if all them terminate, then the shared page continues being available. (We can see this with ipcs). If some process did the shmctl, then when the last process deattached, then the system will deallocate the shared memory. So far so good (I guess, if not, correct me). What I dont understand from that quote I did, is that first it say: "Semaphores continue to exist even after all processes using them have terminated." and then: "Unlike shared memory segments, removing a semaphore set causes Linux to deallocate immediately."

  Read the article

• Can't process UIImage from UIImagePickerController and app crashes..

  - by eimaikala

  Hello guys, I am new to iPhone sdk and can't figure out why my application crashes. In the .h I have: UIImage *myimage; //so as it can be used as global -(IBAction) save; @property (nonatomic, retain) UIImage *myimage; In the .m I have: @synthesize myimage; - (void)viewDidLoad { self.imgPicker = [[UIImagePickerController alloc] init]; self.imgPicker.allowsImageEditing = YES; self.imgPicker.delegate = self; self.imgPicker.sourceType = UIImagePickerControllerSourceTypePhotoLibrary; } -(void)imagePickerController:(UIImagePickerController *)picker didFinishPickingMediaWithInfo:(NSDictionary *)info { myimage = [[info objectForKey:UIImagePickerControllerOriginalImage]retain]; [picker dismissModalViewControllerAnimated:YES]; } -(IBAction) process{ myimage=[self process:myimage var2:Val2 var3:Val3 var4:Val4]; UIImageWriteToSavedPhotosAlbum(myimage, nil, nil, nil); [myimage release]; } When the button process is clicked, the application crashes and really I have no idea why this happens. When i change it to: -(IBAction) process{ myimage =[UIImage imageNamed:@"im1.jpg"]; myimage=[self process:myimage var2:Val2 var3:Val3 var4:Val4]; UIImageWriteToSavedPhotosAlbum(myimage, nil, nil, nil); [myimage release]; } the process button works perfectly... Any help would be appreciated. Thanks in advance

  Read the article

• I am not able to kill a child process using TerminateProcess

  - by user1681210

  I have a problem to kill a child process using TerminateProcess. I call to this function and the process still there (in the Task Manager) This piece of code is called many times launching the same program.exe many times and these process are there in the task manager which i think is not good. sorry, I am quiet new in c++ I will really appreciate any help. thanks a lot!! the code is the following: STARTUPINFO childProcStartupInfo; memset( &childProcStartupInfo, 0, sizeof(childProcStartupInfo)); childProcStartupInfo.cb = sizeof(childProcStartupInfo); childProcStartupInfo.hStdInput = hFromParent; // stdin childProcStartupInfo.hStdOutput = hToParent; // stdout childProcStartupInfo.hStdError = hToParentDup; // stderr childProcStartupInfo.dwFlags = STARTF_USESTDHANDLES | STARTF_USESHOWWINDOW; childProcStartupInfo.wShowWindow = SW_HIDE; PROCESS_INFORMATION childProcInfo; /* for CreateProcess call */ bOk = CreateProcess( NULL, // filename pCmdLine, // full command line for child NULL, // process security descriptor */ NULL, // thread security descriptor */ TRUE, // inherit handles? Also use if STARTF_USESTDHANDLES */ 0, // creation flags */ NULL, // inherited environment address */ NULL, // startup dir; NULL = start in current */ &childProcStartupInfo, // pointer to startup info (input) */ &childProcInfo); // pointer to process info (output) */ CloseHandle( hFromParent ); CloseHandle( hToParent ); CloseHandle( hToParentDup ); CloseHandle( childProcInfo.hThread); CloseHandle( childProcInfo.hProcess); TerminateProcess( childProcInfo.hProcess ,0); //this is not working, the process thanks

  Read the article

• Unexpected behaviour of Process.MainWindowHandle

  - by Ed Guiness

  I've been trying to understand Process.MainWindowHandle. According to MSDN; "The main window is the window that is created when the process is started. After initialization, other windows may be opened, including the Modal and TopLevel windows, but the first window associated with the process remains the main window." (Emphasis added) But while debugging I noticed that MainWindowHandle seemed to change value... which I wasn't expecting, especially after consulting the documentation above. To confirm the behaviour I created a standalone WinForms app with a timer to check the MainWindowHandle of the "DEVENV" (Visual Studio) process every 100ms. Here's the interesting part of this test app... IntPtr oldHWnd = IntPtr.Zero; void GetMainwindowHandle() { Process[] processes = Process.GetProcessesByName("DEVENV"); if (processes.Length!=1) return; IntPtr newHWnd = processes[0].MainWindowHandle; if (newHWnd != oldHWnd) { oldHWnd = newHWnd; textBox1.AppendText(processes[0].MainWindowHandle.ToString("X")+"\r\n"); } } private void timer1Tick(object sender, EventArgs e) { GetMainwindowHandle(); } You can see the value of MainWindowHandle changing when you (for example) click on a drop-down menu inside VS. Perhaps I've misunderstood the documentation. Can anyone shed light?

  Read the article

• How to lazy process an xml documentwith hexpat?

  - by Florian

  In my search for a haskell library that can process large (300-1000mb) xml files i came across hexpat. There is an example in the Haskell Wiki that claims to -- Process document before handling error, so we get lazy processing. For testing purposes i have redirected the output to /dev/null and throw a 300mb file at it. Memory consumption kept rising until i had to kill the process. Now i removed the error handling from the process function: process :: String -> IO () process filename = do inputText <- L.readFile filename let (xml, mErr) = parse defaultParseOptions inputText :: (UNode String, Maybe XMLParseError) hFile <- openFile "/dev/null" WriteMode L.hPutStr hFile $ format xml hClose hFile return () As a result the function now uses constant memory. Why does the error handling result in massive memory consumption? As far as i understand xml and mErr are two seperate unevaluated thunks after the call to parse. Does format xml evaluate xml and build the evaluation tree of 'mErr'? If yes is there a way to handle the error while using constant memory? http://www.haskell.org/haskellwiki/Hexpat/

  Read the article

• Across process marhalling problem with an array of points

  - by ElMagn

  Hi All, We have what we think is a marshalling problem with a renderer object when called across process boundaries. The renderer is an ATL COM server with a COM object that implements the IPoints interface defined below: typedef [uuid(B0E01719-005A-427c-B9DD-B42A18E969AE)] struct Point { double X; double Y; } Point; [ object, uuid(3BFECFE3-B4FB-4f14-8257-6E065D02E3B3), helpstring("IPoints Interface"), dual, ] interface IPoints : IDispatch { HRESULT DrawPolyLine([in] long hDC, [in] short count, [in, size_is(count)] Point * points ); // many more like DrawLine } The count parameter represents the number of points and the points parameter represents an array of the actual points. We have two process running, a graphical display process (GDP) and a tabular (grid) display process (TDP). A factory in the GDP, written in C#, creates the renderer and the clients of the renderer in the GDP. When the clients call into the renderer, everything displays correctly. The renderer is created at start up BTW. There is another factory in the TDP, written in VB6, that calls into the factory in the GDP to create the clients. When the clients call into the renderer, only the first point in the array is marshaled correctly, all the other points are garbage. Seems that the rendering works only when the client creation is started from the same process as the renderer. Now, i am not sure what the solution to this problem is. It seems that if we can guarantee that the clients are always created from a thread in the same GDP process as the renderer then the points are marshaled correctly. We tried using a background thread from the Thread Pool in C# and it indeed worked. The problem is that Windows Forms created from the clients stopped working because accessing the form's controls from a thread other than the thread that created the control is not allowed. We might change the calls to access the forms but we have quite a few of them and are trying to look into a different solution that might involve making changes to the renderer. The other problem is that the renderer is legacy code and we can't just change the interface. I am wondering what can we do to the renderer's interface that would help with marshalling from across process calls. Any ideas would be greatly appreciated. Regards, ElMagn

  Read the article

• Apache - child process exited with status 255

  - by Brian

  I am running Windows 7 64-bit with an older version of (Apache 2.0.59) and PHP 5.2 - just switched from XP and wanted to keep the same versions. Everything will initially be working fine, but then I'll be trying to load a page and Apache crashes. I'll get an error in the browser that says "The connection to the server was reset while the page was loading." Then Apache stops running. Sometimes it can be restarted, but then crashes again on the next page load. Sometimes it can't even be restarted at all. Looking in the Apache error logs, I see a series of messages that goes something like: [notice] Apache/2.0.59 (Win32) PHP/5.2.13 configured -- resuming normal operations [notice] Server built: Jul 27 2006 15:55:03 [notice] Parent: Created child process 1220 [notice] Child 1220: Child process is running [notice] Child 1220: Acquired the start mutex. [notice] Child 1220: Starting 250 worker threads. [notice] Parent: child process exited with status 255 -- Restarting. I have just come from Win XP where I never had any problems - is this an issue with my Apache version on Win7? Or perhaps it's a configuration issue? Any help would be greatly appreciated, I've done days of research and found nothing helpful. Thanks, Brian

  Read the article

• Can't start Bind9 on Ubuntu 10.04 + Plesk 10.1 - "named: no process found"

  - by bradley.ayers

  I've installed a fresh version of Ubuntu 10.04 64bit, I didn't install bind when choosing what packages should be installed in the Ubuntu installer. I downloaded the auto installer for Plesk 10.1 and installed it successfully. When I logged into the Plesk control panel and tried to change the password, it failed because it couldn't restart bind. I SSH'd into the box and tried a sudo /etc/init.d/bind9 restart and get the following: brad@ws01:/root# sudo /etc/init.d/bind9 restart * Stopping domain name service... bind9 WARNING: key file (/etc/bind/rndc.key) exists, but using default configuration file (/etc/bind/rndc.conf) rndc: connect failed: 127.0.0.1#953: connection refused named: no process found [ OK ] * Starting domain name service... bind9 [fail] Looking at tail /var/log/messages reveals a whole bunch of: Feb 23 16:08:21 ws01 kernel: [ 3840.065851] type=1503 audit(1298441301.831:31): operation="open" pid=5565 parent=5563 profile="/usr/sbin/named" requested_mask="::r" denied_mask="::r" fsuid=108 ouid=0 name="/var/named/run-root/etc/named.conf" Edit: After following ooshro's advice, bind runs, however I still get the named: no process found error: brad@ws01:/etc/apparmor.d$ sudo /etc/init.d/bind9 restart * Stopping domain name service... bind9 WARNING: key file (/etc/bind/rndc.key) exists, but using default configuration file (/etc/bind/rndc.conf) named: no process found [ OK ] * Starting domain name service... bind9 [ OK ]

  Read the article

• Locating memory leak in Apache httpd process, PHP/Doctrine-based application

  - by Sam

  I have a PHP application using these components: Apache 2.2.3-31 on Centos 5.4 PHP 5.2.10 Xdebug 2.0.5 with Remote Debugging enabled APC 3.0.19 Doctrine ORM for PHP 1.2.1 using Query Caching and Results Caching via APC MySQL 5.0.77 using Query Caching I've noticed that when I start up Apache, I eventually end up 10 child processes. As time goes on, each process will grow in memory until each one approaches 10% of available memory, which begins to slow the server to a crawl since together they grow to take up 100% of memory. Here is a snapshot of my top output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1471 apache 16 0 626m 201m 18m S 0.0 10.2 1:11.02 httpd 1470 apache 16 0 622m 198m 18m S 0.0 10.1 1:14.49 httpd 1469 apache 16 0 619m 197m 18m S 0.0 10.0 1:11.98 httpd 1462 apache 18 0 622m 197m 18m S 0.0 10.0 1:11.27 httpd 1460 apache 15 0 622m 195m 18m S 0.0 10.0 1:12.73 httpd 1459 apache 16 0 618m 191m 18m S 0.0 9.7 1:13.00 httpd 1461 apache 18 0 616m 190m 18m S 0.0 9.7 1:14.09 httpd 1468 apache 18 0 613m 190m 18m S 0.0 9.7 1:12.67 httpd 7919 apache 18 0 116m 75m 15m S 0.0 3.8 0:19.86 httpd 9486 apache 16 0 97.7m 56m 14m S 0.0 2.9 0:13.51 httpd I have no long-running scripts (they all terminate eventually, the longest being maybe 2 minutes long), and I am working under the assumption that once each script terminates, the memory it uses gets deallocated. (Maybe someone can correct me on that). My hunch is that it could be APC, since it stores data between requests, but at the same time, it seems weird that it would store data inside the httpd process. How can I track down which part of my app is causing the memory leak? What tools can I use to see how the memory usage is growing inside the httpd process and what is contributing to it?

  Read the article

• How can I find out which processes on my computer are accessing the microphone?

  - by Vinayak

  After reading this interesting Lifehacker post and reading the comments on the page, one person was wondering if it would be possible to use the Physical Device Object Names of other hardware such as the microphone to find out the names of processes using that device. I tried the same approach, but so far it only seems to work for the webcam. Is there any other way I could get this to work in Process Explorer? UPDATE: The Lifehacker post was about finding out which Windows process is currently using your webcam. This is how they went about doing it: Start Device Manager (WIN+R → "devmgmt.msc" → OK) Find your webcam among the list of devices (check under Imaging Devices) Open the properties window of the device and switch to the Details tab (Right click → Properties → Details) In the dropdown menu, select Physical Device Object Name and copy the string(Right click → Copy) Download Process Explorer Make sure you have opened Process Explorer in Administrator Mode(File → Show Details for All Processes) Hit CTRL+F and enter the string you copied earlier(it should be something like \Device\000000XX) Hit the Search button and you should see a list of processes using the webcam(if there are any)

  Read the article

• Apache2 process stuck at 100% cpu, CLOSE_WAIT socket lingering

  - by mmazing

  I've troubleshooted the heck out of this today, and I can't seem to find any information on how to determine what is happening exactly. Basically, on my development server, another developer is causing CLOSE_WAIT connections that eat up one or more apache2 processes for several hours if I don't restart apache2. strace on any of the processes yields no information, only that it was able to attach. mod_proxy is not enabled. KeepAlive is on, KeepAliveTimeout is 15 seconds, MaxKeepAliveRequests is 100. From what I've been reading, this may or may not be an apache issue at all, just that that's how CLOSE_WAIT works (the server is waiting for a FIN packet to close the connection). I just can't believe that a server would be crippled so easily by not receiving a packet from a remote host telling it to close the connection. Especially without any intervention for well over an hour. Any tips? I'm about to pull my hair out. Edit : Also, there are no unusual entries in any apache log files. Edit 2: lsof -i shows only a single CLOSE_WAIT per hanging process. (That's what has been bothering me about this, as most other discussions talk about many CLOSE_WAIT connections, while I only have one per process.) The nature of the code that is running (php) doesn't really lend itself to closing open connections and whatnot. I can run the same code that he is executing with the same session data, and not result in a hanging process.

  Read the article

• Mac OS Leopard: SyncServer process constantly using 100% CPU

  - by macca1

  I am running Leopard that I upgraded from Tiger. I've been noticing that every once in a while the SyncServer process starts up and eats up all the CPU. The fans will start going at full blast and the laptop will slow down to a crawl. I need to force quit the process from Activity Monitor to get it under control. It disappears for a while, but eventually gets started again. I do have an iphone as well that I sync so I'm wondering if syncServer might be an apple process checking for my phone plugged in. Edit: Tried iSync and the manual resetsync as suggested, but got this output: Vince-2:~ vince$ /System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsync.pl full 2010-03-12 08:03:50.230 perl[176:10b] SyncServer is unavailable: exception when connecting: connection timeout: did not receive reply PerlObjCBridge: NSException raised while sending reallyResetSyncData to NSObject object name: "ISyncServerUnavailableException" reason: "Can't connect to the sync server: NSPortTimeoutException: connection timeout: did not receive reply ((null))" userInfo: "" location: "/System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsync.pl line 16" ** PerlObjCBridge: dying due to NSException Vince-2:~ vince$ And during that syncServer started spinning up 95-100% just like it always does.

  Read the article

• High disk I/O - jbd2/sda2-8 process

  - by Evan Hamlet

  I have run a file server on a CentOS 5.8 final server. My only concern at the moment is what appears to be intermittent but continuous high disk I/O activity causing a general slowdown because of jbd2/sda2-8 process. jbd2/sda2-8 is making use of /dev/sda2, which is the 2nd partition of the first harddrive (IE: root partition). More info: using "iotop" the culprit appears to be "jbd2/sda1-8" making writes every second, which appears to be a kernel process associated with journaling on the ext4 filesystem, if my googling around is correct. I see "jbd2/sda2-8" appearing here every now and then, but certainly not every 3 seconds.. when idle, it appears about 1 or 2 times per minute. When I'm using the system, it appears more frequently. ATOP results: http://grabilla.com/02b14-8022db2e-4eb9-4f10-8e10-d65c49ad7530.png IOTOP results: http://grabilla.com/02b14-cf74b25d-4063-4447-9210-7d1b9b70e25b.png HTOP results: grabilla. com/02b14-ad8cad0e-89b0-46d3-849d-4fd515c1e690.png jbd2/sda2-8 is the processes I see with iotop making writes on disk even though it's not in use at all. Does someone has any idea how could I solve the high disk usage caused jbd2/sda2-8 process?

  Read the article

• Supervisord doesn't stop nginx process

  - by Lennart Regebro

  I'm using Supervisor a lot, and in this project I have an nginx process managed by Supervisord. The relevant parts of the configuration is this: [supervisord] logfile=/home/projects/eceee-web/prod/var/log/supervisord.log logfile_maxbytes=5MB logfile_backups=10 loglevel=info pidfile=/home/projects/eceee-web/prod/var/supervisord.pid ; childlogdir=/home/projects/eceee-web/prod/var/log nodaemon=false ; (start in foreground if true;default false) minfds=1024 ; (min. avail startup file descriptors;default 1024) minprocs=200 ; (min. avail process descriptors;default 200) directory=/home/projects/eceee-web/prod [program:nginx] command = /home/projects/eceee-web/prod/bin/nginx redirect_stderr = true autostart= true autorestart = true directory = /home/projects/eceee-web/prod stdout_logfile = /home/projects/eceee-web/prod/var/log/nginx-stdout.log stderr_logfile = /home/projects/eceee-web/prod/var/log/nginx-stderr.log The /home/projects/eceee-web/prod/bin/nginx command will start nginx in the foreground, it does not deamonify itself. Still, stopping it will fail: supervisorctl stop nginx Will not give any answer, but the process will continue. Any idea what? This is on OS X Darwin, with Supervisor 3.0a9 and nginx 0.7.65.

  Read the article

• Postfix qmgr process causes heavy overload on mailservers

  - by Mattias

  We are using Postfix as MTA for our e-mailmarketing software and once in a while we see that the load on one of the mailservers rises above 5. The load is caused by the qmgr-process which is the heart of Postfix and I see that it is consuming a lot of CPU resources. The process seems to be stuck because after 15 minutes it is still doing the samething and still increasing the load. Once I restart the postfix service the load rapidly decreases to below 1 and Postfix continues to send e-mails without any problems. I'm wondering if anyone else has encountered this problem and if people have suggestions on how to prevent it. The problem shows up on all our mailservers but almost never at more than 1 at the time. It seems to be triggered only when we are sending a mailing but the size (10 or 100.000 e-mails doesn't seem to make a difference). It maybe happens once a week or even less often and the time and day is also different every time. We tried to solve the problem by decreasing the amount of messages qmgr is allowed to process but this didn't solve it. We are using Postfix 2.5.5 on Debian Lenny 5.0.8 (postfix is installed through the default Debian repository). No special messages can be found in the logs (syslog, messages, mail.*). Thank you for your time

  Read the article

• Upstart can't determine my process' pid

  - by sirlark

  I'm writing an upstart script for a small service I've written for my colleagues. My upstart job can start the service, but when it does it only outputs queryqueue start/running; note the lack of a pid as given for other services. #/etc/init/queryqueue.conf description "Query Queue Daemon" author "---" start on started mysql stop on stopping mysql expect fork env DEFAULTFILE=/etc/default/queryqueue umask 007 kill timeout 30 pre-start script #if [ -f "$DEFAULTFILE" ]; then # . "$DEFAULTFILE" #fi [ ! -f /var/run/queryqueue.sock ] || rm -rf /var/run/queryqueue.sock #exec /usr/local/sbin/queryqueue -s /var/run/queryqueue.sock -d -l /tmp/upstart.log -p $PIDFILE -n $NUM_WORKERS $CLEANCACHE $FLUSHCACHE $CACHECONN end script script #Originally this stanza didn't exist at all if [ -f "$DEFAULTFILE" ]; then . "$DEFAULTFILE" fi exec /usr/local/sbin/queryqueue -s /var/run/queryqueue.sock -d -l /tmp/upstart.log -p $PIDFILE -n $NUM_WORKERS $CLEANCACHE $FLUSHCACHE $CACHECONN end script post-start script for i in `seq 1 5` ; do [ -S /var/run/queryqueue.sock ] && exit 0 sleep 1 done exit 1 end script The service in question is a python script, which when run without error, forks using the code below right after checking command line options and basic environmental sanity, so I tell upstart to expect fork. pid = os.fork() if pid != 0: sys.exit(0) The script is executable, and has a python shebang. I can send the TERM signal to the process manually, and it quits gracefully. But running stop queryqueue claims queryqueue stop/waiting but the process is still alive and well. Also, it's logs indicate it never received the kill signal. I'm guessing this is because upstart doesn't know which pid it has. I've also tried expect daemon and leaving the expect clause out entirely, but there's no change in behaviour. How can I get upstart to determine the pid of the exec'd process

  Read the article

• Process PHP files from a network share in a vmware virtual machine

  - by nhinkle

  As a testing environment, I have set up a vmware virtual machine running Windows Server 2008 R2. I have Apache and PHP installed (as part of the xampp package). I am doing the development outside of the VM, and so want Apache to serve PHP files from a VM shared folder (which appears as a network share in the VM). I have done this by creating an NTFS symbolic link in Apache's htdocs directory. I can access this directory from the browser, and plain-text files are readable. However, PHP fails to process files, instead returning the following error: Warning: Unknown: failed to open stream: No such file or directory in Unknown on line 0 Fatal error: Unknown: Failed opening required 'C:/xampplite/htdocs/path/to/file.php' (include_path='.;C:\xampplite\php\PEAR') in Unknown on line 0 It appears to be a permissions issue — PHP doesn't seem to be allowed to read the file to process it. However, Apache has no problem opening files in the directory. I cannot figure out how to give PHP the necessary permissions to process the file. Does anybody know of a way to make this work, or else another solution for getting the files into the VM automatically while I develop on the host machine?

  Read the article

• Delete on windows vista and seven -- discovery process

  - by M'vy

  Hi SUs! I've recently encountered a problem. Using svn at work I needed to clear some space. As you may know svn directories are full of sub-directories and files. So the delete process begins with a step of discovering the items to be deleted (I guess this is for displaying the progress bar). But in my case it ended up to be still running after I watched Braveheart (Off-topic: good film in my opinion. On-topic: and it last 2h50) and counting 440 000+ files. I finally decided to cut off the process and use the good old cmd with a del <directory> to do the job. (Done in some minutes) So I'm wondering if someone know how to override the system to make it actually begins the process while scanning the other items? At the end, I just want the file to be deleted and I don't care the number of files to be deleted. On the contrary I care about the time it takes. Thanks

  Read the article

• Upstart Script on Centos 6

  - by MarcusMaximus

  I'm trying to create an upstart script to run a python script on startup. In theory it looks simple enough but I just can't seem to get it to work. I'm using a skeleton script I found here and altered. description "Used to start python script as a service" author "Me <[email protected]>" # Stanzas # # Stanzas control when and how a process is started and stopped # See a list of stanzas here: http://upstart.ubuntu.com/wiki/Stanzas#respawn # When to start the service start on runlevel [2345] # When to stop the service stop on runlevel [016] # Automatically restart process if crashed respawn # Essentially lets upstart know the process will detach itself to the background expect fork # Start the process script exec su nonrootuser -c "python /usr/local/scripts/script.py" end script The test script I want it to run is currently a simple python script that runs without any issue when run from a terminal. #!/usr/bin/python2 import os, sys, time if __name__ == "__main__": for i in range (10000): message = "shotgunUpstartTest " , i , time.asctime() , " - Username: " , os.getenv("USERNAME") #print message time.sleep(60) out = open("/var/log/scripts/scriptlogfile", "a") print >> out, message out.close() The location/var/log/scripts has permissions 777 The file /usr/local/scripts/script.py has permissions 775 The upstart script /etc/init.d/pythonupstart.conf has permissions 755

  Read the article

• Powershell Get-Process cannot connect to remote computer

  - by amandion

  I've been struggling with this for a few hours and can't figure this out. I have two Windows 7 computers. One is my workstation that is using Powershell to do administrative maintenance. The other is the machine I'd like to use Powershell remoting on to execute remote Powershell cmdlets on. On both computers, I've enabled Powershell remoting and added all computers to TrustedHosts with the * value. On the remote computer, I've started the Remote registry service and ensured that the DCOM, Winmgmt and the Winrm services are running. Firewall is disabled on remote machine too. The cmdlet I try to run is: Get-Process -ComputerName $name Where $name is the name of the remote machine. I keep getting an error saying that it could not connect to the remote PC. I've also tried using the IP and I get the same error. These PCs are not in a domain. I am able to do the following successfully: Invoke-Command {get-Process} -ComputerName $name -Credential $creds Where $name is the machine name and $creds is the user name and password for the remote computer's local Admin account. This gives me the same output I would expect. While this is an acceptable workaround, I am curious, why doesn't using get-process with remoting work as it should? I've seen a few articles on the web suggesting people have had success with it on its own. Each time I am using Powershell on my workstation with elevated privileges. Any ideas?

  Read the article

• Run Python script at startup using upstart

  - by MarcusMaximus

  I'm trying to create an upstart script to run a python script on startup. In theory it looks simple enough but I just can't seem to get it to work. I'm using a skeleton script I found here and altered. description "Used to start python script as a service" author "Me <[email protected]>" # Stanzas # # Stanzas control when and how a process is started and stopped # See a list of stanzas here: http://upstart.ubuntu.com/wiki/Stanzas#respawn # When to start the service start on runlevel [2345] # When to stop the service stop on runlevel [016] # Automatically restart process if crashed respawn # Essentially lets upstart know the process will detach itself to the background expect fork # Start the process script exec python /usr/local/scripts/script.py end script The test script I want it to run is currently a simple python script that runs without any issue when run from a terminal. #!/usr/bin/python2 import os, sys, time if __name__ == "__main__": for i in range (10000): message = "UpstartTest " , i , time.asctime() , " - Username: " , os.getenv("USERNAME") #print message time.sleep(60) out = open("/var/log/scripts/scriptlogfile", "a") print >> out, message out.close() The location/var/log/scripts has permissions 777 The file /usr/local/scripts/script.py has permissions 775 The upstart script /etc/init.d/pythonupstart.conf has permissions 755

  Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >